advertisement
▼
Scroll to page 2
of 57
DR7823NW1C_HAASLL_ENG DVD RECORDER OWNER'S MANUAL MODEL : DR7823W Before connecting, operating adjusting this product, booklet carefully and completely. please read this instruction or Safety Precautions CAUTION CAUTION appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has CAUTION: TO REDUCE THE RISK (OR BACK) damaged PERSONNEL. symbol is intended to alert the within user an to risk of electric shock to persons. The exclamation point within is intended to alert the important operating or cracked wire insulation are dangerous. Any user an or or or of fire. examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, dis- Periodically the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude page of this owner's manual to be certain. these conditions could result in electric shock with arrowhead a branch circuits. Check the outlets, loose damaged wall outlets, extension cords, frayed power cords, REFER SERVICING TO QUALIFIED SERVICE to constitute or Do not overload wall outlets. Overloaded wall NO USER-SERVICEABLE PARTS INSIDE lightning flash equilateral triangle additional outlets no specification OF ELECTRIC SHOCK This Power Cord Most RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER concerning the equilateral triangle to the presence of continue an appliance, and have the cord replaced replacement part by an authorized servicer. use exact of the with Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall the point where the cord exits the appliance. outlets, and and maintenance instructions in the literature (servicing) accompanying the product. SERIAL NUMBER: You can find the serial number the back of the unit. This number is unit and not available to others. You WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK should information here and retain this HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN as a OR MOISTURE. as a bookcase or equipment in confined space a Serial No. ______________________________ ______________________________ similar unit. The appliance children or is not intended for infirm persons without by young supervision. use Young Children should be supervised that they do not play with appliance. If the CAUTION: This To product employs ensure proper use a Laser of this System. product, please read this owner's manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTI- CAL INSTRUMENTS. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be 2 guide permanent record of your purchase. Model No. WARNING: Do not install this such unique to this record requested on placed on the apparatus. ensure supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. appliance is to Table of Contents Disc..............................26-27 INTRODUCTION SafetyPrecautions.......................2 ?Initialize............................26 TableofContents........................3 ?DiscProtect.........................26 DVDRecorderOverview................4-10 ?Finalize............................27 .4 RecordableandPlayableDiscs. PlayableDiscs.........................5 ?DiscLabel..........................27 . . . . . . . . . . Overview for the On-Screen Display . . . . . . . . 28 Disc-relatedterms......................6 AboutSymbols.........................6 Aboutrecordablediscs...................7 PLAYBACK .29-32 DVDorVideoCDPlayback. PlayingaDivXMovieDisc................33 34-36 Audio CD and MP3/WMA Operation 34-35 Playing an Audio CD or MP3/WMA file ProgrammedPlayback..................36 JPEGFileOperation..................37-38 . AboutDVDrecording...................8-9 Carduseableonthisunit.................9 UsingMemoryCard.....................9 Precautions..........................10 NotesonDiscs........................10 FrontPanel............................11 RemoteControlOverview................12 DVR HOOKUP . . . . . . . . . . . . . . . . . . . . RECORDING BasicRecording........................39 .39 BasicRecordingfromTVchannels. InstantTimerRecording.................39 TimerRecording.....................40-41 Recording from an External Input Source 42-43 42 Recording from External Components 42 Recording from a Digital Camcorder . Connections........................13-16 RearPanelConnections.................13 ConnectingtotheAerial.................13 ConnectionstoYourTV.................14 ConnectingtoanAmplifier...............15 16 Accessory Audio/Video (A/V) Connections . . . DVR SETUP . . . . . . . . . . . . . . . . . . . . . . WhatisDV?..........................43 EDITING Pre-operationSetup..................17-28 InitialSettings.........................17 General...........................17-21 ?AutoProgramming....................17 ?ProgramEdit.....................18-19 ?ClockSet..........................20 ?TVAspectRatio.....................20 ?DisplayMode.......................20 ?ProgressiveScan....................20 ?PBC..............................21 ?FactorySet.........................21 Language............................21 ?DisplayLanguage....................21 ?DiscLanguage......................21 Audio...............................22 .22 ?DolbyDigital/DTS/MPEG. ?SamplingFrequency..................22 .22 DRC(DynamicRangeControl). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ProtectaTitle.........................49 HideaChapter........................50 DividingOneTitleIntoTwo...............50 . ? . 44 Chapter List Menu Overview .45-50 TitleandChapterEditing. Titles,Chapters,andParts...............45 AddingChapterMarkers.................45 ChangingTitleThumbnails...............45 MakingaNewPlaylist...................46 Adding Additional Title/Chapters to the Playlist 46 DeletingaTitle/Chapter.................47 DeletingaPart........................47 NamingaTitle........................48 .48 CombiningTwoChaptersIntoOne. MovingaPlaylistChapter................49 Title List and REFERENCE . ?V ocal..............................22 Lock(ParentalControl)...............23-24 ?SetPassword.......................23 ?Rating.............................23 ?AreaCode..........................24 ?DivX(R)VOD........................24 Recording............................25 ?RecordModeSet....................25 ?RecordAspectRatio..................25 ?DVRecordAudio.....................25 AdditionalInformation...................51 OverwritingRecording..................51 Viewing Title List menu displayed on .51 otherDVDRecordersorPlayers. Playing Your Recordings on Other .51 DVDPlayers(FinalizingaDisc). .52 LanguageCodeandAreaCodeList. 53 Controlling Your TV with the Supplied Remote. Troubleshooting.....................54-55 Specifications.........................56 . . . . . . . . . . . . . . . . . . . . . . . . . . . ?AutoChapter........................25 3 INTRODUC DVD Recorder Overview Recordable and DVD-RW DVD-RW discs the Video Disc (Digital These Discs Discs Playable ReWritable): - be formatted for VR mode can be recorded can recording repeatedly. Recordings on or Video mode be can recording. erased, then you can record again on Disc. same [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R Video Disc (Digital Recordable) These Discs can be recorded only once. After you finalize DVD-R discs can be only formatted to Video mode. Playable on regular DVD players (after finalization) Limited editing features DVD+RW the Video Disc (Digital These Discs can + be recorded ReWritable) on repeatedly. Recordings a be can erased, then you on (Digital These Discs any can it on record edit it. or again on DVD+RW compatible players (automatically finalization) The edited contents are playable on DVD+RW compatible players only Recordings can be edited the title/chapter DVD+R cannot record DVD-R, you Disc. same Playable - Video Disc can be Recordable) recorded only once. After after finalization + you finalize a DVD+R, you cannot record on it or edit it more. Playable on DVD+R compatible players (after finalization) Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added chapter mark, etc.) Limited title/chapter editing features. DVD+R DL (Digital These Discs it any can Video Disc be recorded + Recordable; Double Layer) only once. After you finalize a DVD+R DL, you cannot record on it or edit more. space is nearly doubled with double 8.5GB of video on a single DVD+R disc. Storage layer DVD+R media, allowing consumers to record up to Playable on DVD+R DL compatible players (after finalization) Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter combine, added chapter mark, etc.) Limited title/chapter editing features. The recommendable recordable DVD discs DVD-R SONY (8x, 16x) TDK (4x, 8x) Ve rbatim (4x, 8x) Panasonic (2x, 4x) DVD+R DVD-RW SONY (2.4x, 4x, 8x, 16x) TDK (4x) Mitsubishi (4x, 8x) Ricoh (2x, 4x, 8x) DVD+RW Victor (1x, 4x) Maxell (1x, 2x, 4x) TDK (2x) Mitsubishi (2x) --- DVD+R(DL) Mitsubishi (2.4x) Maxell (2.4x) SONY (2.4x) TDK (2.4x) Philips (4x) Ricoh (2.4x) H P (2.4x, 4x) - - - Note: If a DVD-RW/DVD+RW discs is recorded this recorder. So if you want to 4 use using the disc on a personal computer this recorder, you or other DVD recorder, you must format the disc using the cannot format the disc original recorder. using DVD Recorder Overview Playable Discs DVD(8cm/12cmdisc) Discs such Video CD movies that as (VCD) (8 VIDEO CDs or cm be can / 12 cm purchased or rented INTRODUC disc) CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format AudioCD(8cm/12cmdisc) Music CDs or CD-R/CD-RW CD-Rs/CD-RWs in music CD format that (8 cm / 12 cm can be purchased disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files. Notes: -- -- -- -- -- -- Depending on the conditions R/RW (or DVD±R/RW) discs recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CDcannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions. Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable. DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens. If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) Regional code of the recorder and DVDs This recorder is 2 of the code on designed the labels of and manufactured for some playback DVD discs indicates which play only DVD discs labeled 2 or ALL. If code. Can't play back" will appear on the TV screen. though their playback is prohibited by area limits. can of Region 2 encoded DVD software. The region type of the recorder can play those discs. This unit play any other discs, the message "Incorrect region you try to Some DVD discs may not have a region code label even Notes on DVDs and Video CDs Some unit playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. Refer also to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be played on the unit. Remote Control Operation Point the Remote Control at the remote Remote Control Battery sensor and press the buttons. Installation Remove the batteries with battery cover on and the matched rear of the Remote Control, and insert two R03 (size AAA) correctly. Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 5 DVD Recorder Overview (Continued) Disc-related terms DVD +R (Double Layer) Double layer recording technology offers two recordable layers on a single DVD disc, providing nearly double the capacity of 4.7GB single layer DVDs. The greatest, most valuable benefit of double layer recording technology is increased capacity. Storage space is nearly doubled with double layer DVD+R media, allowing consumers to burn up to 8.5GB of video on a single DVD+R disc. DVD±R/DVD±RW DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. re-writable media, meaning erased and re-recorded. 4.38 Gigabytes of Video CDs Types are only There are two types of Video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact Video CDs PBC with the system via tion still pictures menus, search functions, or other typical computer-like operations. Moreover, high resolucan be included are the DVD content Single-sided discs can can be hold and double-sided discs hold twice as Video CDs not with PBC equipped (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. About Symbols About the " symbol display " may appear on the TV This icon means the function during operation. explained in this owner's that specific disc, or at that on screen time. (DVD only) The main film content, or music album. Each title is assigned locate it easily. accompanying a feature content, title reference number enabling About the disc symbols A section whose title has Many dent for instructions one of the to those discs applicable only symbol. are Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to enable you to locate the chapter you want. Depending on the disc, chapters may not be labeled. following symbols represented by the functions the on provided on this Recorder recording mode. One or more VR bols( , Video DVD+R , , DVD+RW each function see at a are depen- of the sym- appear by so that you can (explained in this manual) glance whether it's applicable to ) the disc loaded. Track (Video CD and Audio CD only) Sections of a picture or a musical piece on a Video CD or an Audio CD. Each track is assigned a track number, enabling you to locate the track you want. Scene On Video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene available is displayed on the Scene menu and assigned a scene number, enabling you to locate the scene you want. A scene may be composed of one or several tracks. a DivX DivX is the name which is based on of a the revolutionary new MPEG-4 dard for video.You will be able to using 6 this DVD on the disc. manual is not available you to they two standards for much. Title if played player. new Video DVD-R/RW with Video VR DVD-RW with VR +R DVD+R (DL) DVD+RW disc DVD DVD-Video disc VCD Video CDs CD Audio CDs DivX files MP3 MP3 files WMA WMA files JPEG JPEG files recording mode mode disc +RW DivX recording video codec compression stanplay DivX movies The finalized DVD disc is a DVD-Video disc. DVD Recorder Overview (Continued) About recordable discs How are DVD+RW mode recordable discs different? The essential difference among DVD-R, DVD-RW, DVD+R and DVD+RW is that DVD-R and DVD+R recording +RW ?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ) Playable on regular DVD players The edited contents is playable on regular DVD players only after finalizing Recordings can be edited the title/chapter ? are ? record-once medium, while DVD-RW and DVD+RW re-recordable/erasable medium. You can are re-record/ ? erase a DVD-RW and DVD+RW disc approximately 1,000 times. DVD+R mode Can I play my recordable discs in a regular DVD player? Generally, DVD-R, DVD+R and DVD-RW discs recorded in Video mode are playable in a regular DVD player, but they must be 'finalized' first. This process fixes the contents of the disc to make them readable to other DVD players as DVD-Video discs. DVD-RW discs recorded in VR are playable in some players. Unfinalized DVD+RW discs DVD player.This indicates capable of with Video What are There are mode (Video Recording) are playable in a regular product feature that is playing DVD-RW discs recorded Recording format. a 'recording modes'? various recording modes available using this Recorder. When recording to a DVD-R, DVD+R or DVD+RW disc, recordings are always in Video mode. DVD-RW discs can be formatted for VR mode recording or Video mode recording. VR mode VR recording ?4different picture quality/recording time settings able (HQ, SQ, LQ, EQ) Not playable on regular DVD players Recordings can be extensively edited avail- ? +R recording ?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ) Playable on regular DVD players (after finalization) Any edited contents are not be compatible on regular DVD players. (Hide, chapter combine, added chapter mark, etc.) Limited title/chapter editing features. ? ? ? Note : DVD-Video Format (Video mode) is a new format for recording on DVD-R/RW and DVD+R/RW discs that was approved by the DVD Forum in 2000. You may therefore experience problems playing recordable DVD discs in some players. Symptoms include video artifacts, audio and/or video dropouts and playback suddenly stopping. Our company cannot take responsibility for problems playing discs recorded on this Recorder in other players. Is editing a DVD like editing a video tape? No. When you edit a video tape you need one video deck to play the original tape and another to record the edits. With DVD, you edit by making play and when to play it. plays the disc according to to On the 'Playlist' of what playback, the Recorder Playlist. a ? Video mode recording Video ?4different picture quality/recording time settings available (HQ, SQ, LQ, EQ) Playable on regular DVD players (after finalization) Limited editing features ? About word and 'Playlist' Throughout this manual, you will often see the words Original and Playlist to refer to the actual content and the edited version. ? ? content refers to what's Original: on ? actually recorded the disc. content refers to the edited version of the Playlist: disc --- how the Original content is to be played. Disc type Disc format Recording DVD-Video Video format n/a Playback only DVD-RW Video Recording format (default) VR mode Playback, Recording, Original/Playlist Editing Video format Video mode Playback, limited Recording, limited Editing DVD-R Video format Video mode Playback, limited Recording, limited Editing DVD+RW +RW Video format DVD+RW Playback, limited Recording, Title/Chapter Editing DVD+R +R Video format DVD+R Playback, limited Recording, (DL) mode 'Original' Functions limited Title/Chapter Editing 7 INTRODUC DVD Recorder Overview About DVD (Continued) Notes for recording ? This recorder cannot make recordings on CD-R This or Our company takes no responsibility for recording failure due to power outages, defective discs, or damage ? to the Recorder. ? Fingerprints and small scratches on a disc can affect playback and/or recording performance. Please take proper ? of your discs. care Disc types and and settings can pre-recorded DVD-Video play ? five different kinds of DVD discs: ? discs, DVD-RW, DVD-R, DVD+RW and DVD+R discs. The disc format for DVD-R discs is always "Video format"---the ed DVD-Video discs. This you can play a DVD-R in means a same as that regular once pre-record- finalized, on Recording TV audio channels can If the NICAM setting (page 18) broadcast is record either NICAM is set to or regular audio. Auto, then if the NICAM, you can record the NICAM audio. If the broadcast is non-NICAM, the regular audio is always 8 recorded. not exact because the variable bit-rate video that the exact compression. recording time will depend the material The recording time available may decrease if you heavily edit a disc. If using a DVD-RW disc, make sure you change the recording format (Video mode or VR mode) before you record anything on the disc. See page 26 (Initialize) for how to do this. When using a DVD-R disc, you can keep recording until the disc is player. Video Recording the disc. This recorder ? DVD By default, the DVD-RW disc format is (VR) format, though you can change this to Video format, if required. (Reinitializing the disc will erase the contents of the disc.) The recording mode is closely related to the disc format. If the disc format is Video Recording format, then the recording mode is VR mode; if the disc format is Video mode, then the recording mode is Video mode (except for DVD-Video, which is not recordable, and so does not have a recording mode). Within the recording modes (which are fixed for them whole disc) are the record settings. These can be changed as required for each recording and determine the picture quality and how much space the recording will take up means are disc. recording formats, modes, This recorder ? uses times shown being recorded. When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter. If you record still pictures or audio only, the recording time may be longer. The displayed times for recording and time remaining may not always add up to exactly the length of the on CD-RW discs. ? recording recorder Notes : ? The recording until you finalize the disc. recording session, check the full, or Before you start a amount of recording time left ? When using a ? ? the disc. DVD-RW disc in Video time available will title recorded on on increase if you the disc. The Erase Title only in the Title erase the last List-Original menu only hides the title, it does not actually erase the title from the disc and increase the recording time available (except for the last recorded title on a DVD-RW disc in Video mode). Overwrite recording is available using DVD+RW discs. option mode, recording DVD Recorder Overview Restrictions ?Y video on (Continued) Card useable recording copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen. ?V ideo that is 'copy-once only' can only be recorded using a DVD-RW disc in VR mode with CPRM (see below). NTSC format signals from the analog or the DV inputs is not recorded correctly with this recorder. ?V ideo signals in SECAM format (from the built-in TV tuner or from the analog inputs) are recorded in PAL ou this unit on cannot record Compact (MD) Secure Digital Card (SD) Multi Media Card (MMC) SmartMedia Card (SMC) xD-Picture Card (xD) Memory Stick (MS) Memory Stick Pro (MS-Pro) Compatible with: FAT 12, FAT 16, or FAT 32 Only use the memory cards recommended above. Regarding is protect switch, if the switch be possible to write, erase or format the it will not a write card. What is 'CPRM'? protection system (with scramble system) only allowing the recording of 'copy once' broada on INTRODUC Write Protect For cards that have format. (CF) Micro Drive ? CPRM is Flash Card copy Inserting/Removing the Memory Card cast programs. CPRM stands for Content Protection for Recordable Media. This Recorder is CPRM compatible, which means that record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM you can recordings can only be made on DVD-RW discs format- ted in VR mode, and CPRM recordings played players on that are only be specifically compatible with Copyright ? or Insert SD, MMC, SMC, xD, MS, or MS-Pro card MD can CPRM. ? Insert CF Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner. product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is pro- Inserting the card: Insert straight-in until it fits into place. Removing the card: Withdraw the card carefully. Notes: the memory card out of reach of children. If swallowed, seek medical advice immediately. Keep A memory card may not be used for this recorder Do not extract the memory card in operating (play, copy, move, etc.). This Using Memory Card 1. Insert 2. Press MEMORY while TV The TV a memory card. Memory viewing. Card slot choice menu appears on the screen. hibited. ? CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE 3. Use b / B to select the desired then press ENTER. The menu appears PROBLEMS, IT IS RECOMMENDED THAT THE Note: USER SWITCH THE CONNECTION TO THE 'STAN- For details DARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD on each on the TV Memory Card slot screen. operation item, refer to relevant pages. RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. 9 DVD Recorder Overview (Continued) Precautions Notes Handling the unit Handling on When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. Discs discs Do not touch the disc the by playback side of the disc. Hold the edges so that fingerprints will not get on the surface. Do not stick paper or tape the disc. on When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. or radio, turn off the or Storing After To keep Do not near the surface clean use volatile such liquids, as the unit. Do not leave rubber contact with the unit for leave marks on a insecticide spray, plastic products in long period of time. They will or discs playing, there may be a considerable increase inside the car. light, as a use a the unit soft, dry cloth. If the surfaces soft cloth solution. Do not benzine, or temperature the surface. To clean the cabinet Use case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- Cleaning Cleaning store the disc in its lightly use thinner, are moistened with a extremely dirty, mild detergent strong solvents such as these as might damage discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center outward. alcohol, the surface of the unit. Yes To obtain clear picture The DVD Recorder is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a No Do not strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static use spray intended for older vinyl records. Moisture Condensation Never operate this product immediately after moving it from a two three hours without or cold location to a warm operating it. If you situation, it may damage product in such a discs/tapes and internal parts. 10 location. Leave it for use this Front Panel ab cd e f gh REC ij k a Point the recorder remote control here. b (PLAY) Starts playback. c x (STOP) Stops playback f OFF. i j recording. or Press repeatedly INPUT 2 (S-VIDEO IN) output of an external (TV/ Monitor, VCR, Camcorder, etc.). to set the record- source kDVIN Connect the DV Disc Tray Insert a disc here. OPEN/CLOSE l (Z) closes the disc m tray. window Shows the current status of the recorder. REC: The recorder is n Indicates when the recorder is in TV tuner digital a through camcorder. memorized channels. MEMORY CARD Slot 1 a memory card (CF/MD). MEMORY CARD Slot 2 Insert recording. output of PROG. (V/v) Scans up or down Insert g Display TV: (Left/Right)) Connect the S-Video recording. or IN/AUDIO IN (VIDEO output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.). time. Opens INPUT 2 Connect the audio/video z (REC) ing e or N Starts INTRODUC mn POWER Switches the recorder ON d l MS a memory card (SD/MMC/SMC/xD/MS/ Pro). mode. : or a Indicates when the recorder is in timer timer recording is recording programmed. clock, total playing time, elapsed time, title number, chapter/track number, channel, etc. : h Indicates Remote Sensor 11 Remote Control Overview CHP.ADD: Inserts chapter playing/recording. when a CLEAR: Removes the on track number a List Program the Marker Search marker or a mark on STOP DISPLAY: Accesses On-Screen (x): Stops playback recording. Display. SUBTITLE: Selects ENTER guage. - menu. Acknowledges menu selection. Displays information while viewing TIMER REC: on of a Skips 15 seconds the disc (about the typical TV: commercial). MARKER: Marks any point during or DivX menu for MENU/LIST: Accesses menu on a and Title List-Playlist OPEN/CLOSE (Z): Opens closes the disc tray. PLAY and Starts (N): on or off. playback. POWER: Switches the recorder ON or OFF. REC (z): Starts recording. Press repeatedly to set the recording time. REC MODE: Selects the mode (HQ, SQ, LQ REPEAT: 0-9 numerical buttons: Selects title, all. numbered RETURN - - ward AV: audio Changes the input to recording (Tuner, AV1-2, 12 use or for DV IN). the menu. menu of a video CD with PBC. A-B: or an (O) Displays SCAN (DVD) or recording EQ). Repeat chapter, track, Removes the memorized channels. language channel (CD). POWER: Turns the TV - PIP: Selects PIP function audio - (m or / M): Search back- forward. SEARCH: Displays Marker Search menu. SETUP: Accesses Setup menu. or removes the - Timer the disc's Title -AV: Selects the TV's (X) : Pause playback or recording temporarily, press again to exit pause mode. an Displays memory card. PAUSE/STEP AUDIO: Selects TITLE: TV Control Buttons menu. sequence. menu. MEMORY: Accesses the List-Original Repeat Record menu, if available. DVD disc. Switches between Title (left/right/up/down): Selects an option in the menu. PR (+/-): Scans up or down through Displays playback. MP3/WMA, JPEG b / B / v / V thumbnail a forward TV program. length a menu. THUMBNAIL: Selects subtitle lan- INSTANT SKIP: a in a or picture for the current title and chapter for use in the Original and Playlist menu. - options SKIP(./>):Gotonext chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track. on or off. source. PR +/--: Selects TV's channel. VOL +/--: ZOOM: Adjusts Enlarges TV's volume. DVD video image. Connections Rear Panel Connections abc hi a d j e f c a Pb e on TV. i a TV with Y Pb Pr AUDIO OUT (Left/Right) Connect to TV with audio a inputs. (Digital audio out jack) to digital (coaxial) audio equipment. AUDIO IN 1 (Left/Right) Connect the audio output of an external source (Audio system, TV/Monitor, VCR, Camcorder). inputs. kVIDEOIN1 Connect the video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). VIDEO OUT f Cooling from the AERIAL to your TV/moni- COAXIAL Connect j Connect to g Input Pr) Connect to d S-Video COMPONENT VIDEO OUT/PROGRESSIVE SCAN (Y signal tor S-VIDEO OUT Connect to RF. OUT Passes the Connect the aerial to this terminal. b DVRHOKUP k l h AERIAL g a TV with video inputs. l fan OPTICAL Connect (Digital audio out jack) to digital (optical) audio equipment. AC Power Cord Plug into the power Connecting source. to the Aerial Rear of TV Aerial SCART INPUT Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the ANTENNA INPUT AUDIO INPUT L recorder. socket input on Plug one VIDEO INPUT R end of the aerial cable into the TV the recorder and the other end into the aerial socket on your TV set. R RF coaxial connection Connect the RF. OUT jack on the recorder to the aerial input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The RF. OUT jack passes the signal through from the AERIAL jack. Rear of the recorder 13 Connections (Continued) Connections to Your TV Tips your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections Depending on Make the of the following connections, depending capabilities of your existing equipment. one on described below. Video connection Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the Connect the VIDEO OUT the DVD Recorder to the video in the video cable best connections. jack the on jack on TV using (V). S-Video connection Caution -- Make sure the DVD Recorder is connected the TV. Tune the TV to the correct video directly to input chan- Do not connect the DVD Recorder's AUDIO OUT to the phono in jack (record deck) jack of your audio sys- tem. -- the recorder to the S-Video in S-Video cable jack Do not connect your DVD Recorder via your VCR. The DVD image could be distorted by the copy protection system. INPUT COMPONENT VIDEO INPUT Y Pb Pr AUDIO INPUT L VIDEO INPUT R the TV (S). Connect the COMPONENT VIDEO OUT jacks on the DVD Recorder to the corresponding input jacks on the TV using an Y Pb Pr cable (C). Progressive Scan If your television is Rear of TV S-VIDEO on jack on using the Video connection Component nel. -- Connect the S-VIDEO OUT connection high-definition or "digital ready" television, you may take advantage of the recorder's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the recorder. a Connect the COMPONENT VIDEO OUT / PROGRESSIVE SCAN in corresponding cable (C). jacks jacks on on the TV the recorder to the using the Y Pb Pr Notes : S C AV Set the Progressive to "On" on the setup menu for progressive signal, see page 20. Set the progressive to "Off" by removing any disc from the unit and close the disc DISC" is displayed on the tray. See that "NO display window. Then press STOP and hold it for five seconds before releasing it. Progressive scan video connections does not work with the (yellow VIDEO OUT analog jack) or S-VIDEO connection. Audio Rear of the recorder (Left/Right) Connection Connect the left and right AUDIO OUT Recorder to the audio left and using the audio cables Recorder's AUDIO (record deck) 14 right IN jacks of jacks on the DVD the TV (A). Do not connect the DVD OUT jack to the phono in jack of your audio system. Connections Connecting (Continued) to an Amplifier Rear of the recorder Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and DVRHOKUP jacks on the DVD Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Right AUDIO OUT with two Connecting channel digital to an amplifier equipped stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) 1 Connect one X A O of the DVD Recorder's DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. You will need to activate the recorder's 2 put. (See Digital "Audio" on page digital out- 22). COAXIAL DIGITAL INPUT R L AUDIO INPUT OPTICAL DIGITAL INPUT Amplifier (Receiver) Multi-channel sound A digital multi-channel sound quality. For this connection provides the best you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD Recorder (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Caution: Due to the DTS will be in DTS Licensing agreement, the digital output digital out when DTS audio stream is selected. Notes : -- If the audio format of the digital output does not match the -- capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. --To see on- press AUDIO. This recorder does not perform internal screen -- the audio format of the current DVD in the display, decoding of a DTS sound track. To multi channel surround, you recorder to DTS recorder's a digital must connect this compatible audio (2 channel) enjoy DTS receiver via one of this outputs. 15 Connections Connecting (Continued) to the INPUT 1 or INPUT 2 Jacks Connect the input jacks (AV1, AV2) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables. Note: If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available. Connecting connect Use Digital Camcorder the front Using tapes a a DV panel DV IN jack, it is possible to digital camcorder and digitally transfer DV to DVD. a DV cable (not supplied) to connect the DV in/out of your DV camcorder to the front of this recorder. jack panel DV IN jack Note: This It is Jack panel of Accessory Component (VCR, Camcorder, etc.) jack is for connection to DV digital camcorder only. not compatible with digital satellite tuners or D-VHS video decks. S-VIDEO OUTPUT AUDIO OUTPUT R DV Digital OR DV IN/OUT L VIDEO OUTPUT OR Rear of the recorder Front of the recorder 16 Front of the recorder Camcorder Pre-operation Setup Initial In this General Settings system, there menu several ways to cusMost menus consist of Auto are tomize the settings provided. three levels to set up the options, but some require greater depth for the variety of settings. If you press SETUP, only the first and second level of the menu system will appear on the TV to help To see "B" The third level can be B. For displayed by pressing els, you will screen. the on navigating the menu levright side of the menu label Programming This DVD Recorder is synthesized tuner equipped with a frequency capable of receiving up to 88 TV channels. Preparation: Connect the DVD Recorder to the desired ial, as shown in Connecting to the Aerial type of on aer- page 13. you go to the next level. up and exit the Menu: Press SETUP to bring up the menu. A second press of SETUP will take you back to initial screen. bring To go to the next level: Press B on the remote control. To go back to the previous level: Press b on the remote control. General 1 2 1 Operation 2 Press SETUP. The Setup menu appears. Use v / V to select the desired While the desired item is 3 4 5 6 press move move selected, press B setting Press SETUP to exit the Setup menu. menu appears. Use v / V to select the General 3 4 option. 5 6 option option. is selected, press B to to the second level. Use v / V to select the Auto Press B to move "Start" icon is Programming to the third level. highlighted. Press ENTER to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them then ENTER to confirm your selection. Some items require additional steps. 7 to option. to the third level. Use v / V to select the desired Setup move to the second level. Press B to The While the General option. Use v / V to select the second desired Press SETUP. in the tuner's memory. Note : After you have connected your DVD recorder for the very first time. If you press SETUP for initial setting, you can only set the "Auto Programming" option. Then you can set the other options. 17 DVRHOKUP Pre-operation Setup (Continued) Program Edit You a can move, edit 8 channel manually (add, delete, etc.). The Setup menu You appears. While the General 3 4 press move option nels option. B to move "Edit" icon is Edit perform manually. can is selected, press B to Edit option search to select and store TV chan- program on the Program List menu then press ENTER. Program List options appears on the left side of the Program Program a 1. Use v / V to select to the second level. Use v / V to select the Program menu. Program Use v / V to select the General 2 List to exit (O) repeatedly name, Press SETUP. 1 Press RETURN List a menu. then to the third level. 2. Use v / V to select 'Program Edit' option from the options then press ENTER. Program Edit menu appears. highlighted. 3.Useb/Btoselecttheitemandpressv/Vto change the setting. [PR] List position. [Seek] Searches for a channel automatically. Searching stops when the recorder tunes in a Press ENTER. 5 Program indicates the selected programme menu channel. appears. 6Usev/VtoselectaPRnumberthenpress ENTER. Program List options menu display. appears on the left side of the [Ch.] Changes [MFT] Fine picture. the channel number. tunes the channel to obtain a clearer 4. Choose OK then press ENTER to confirm the and returns to the Program List menu. 7 Use v / V to select an option then press ENTER to confirm. Program Edit: Edits the selected program. Station Rename: Edits the station Move: Moves the program's name. location on the program list. Delete: Deletes the program from program list. Nicam Auto/Off: Set the NICAM function to for the program Auto 18 or Off. setting Pre-operation Setup (Continued) Edit Program Sorting (Continued) You Station Rename You up to 5 characters Names independently. be can long. 1. Use v / V to select program on the Program List menu then press ENTER. Program List options appears on the left side of the Program List sort the manually program's position on the Program List menu. stations can name can TV channels a menu. 1. Use v / V to select program on the Program List menu then press ENTER. Program List options appears on the left side of the Program Program List options then Keyboard menu appears. option from press ENTER. menu. 2. Use v / V to select 'Move' options 2. Use v / V to select 'Station Rename' List a option from Program List then press ENTER. 3. Use v / V to select desired a position then press ENTER to store. Deleting You can a program delete a program 1. Use v / V to select on the Program List menu. program on the Program List menu then press ENTER. Program List options appears on the left side of the Program List a menu. 2. Use v / V to select 'Delete' options 3. Enter a name for the station. Use vVbBto select character then press ENTER to confirm your selection. a Alphabet Capital: ? case case upper Small: Switches the keyboard to lower characters. Symbol: ? keyboard characters. Alphabet ? Switches the Switches the keyboard to symbol char- acters. OK: Select to finish. ? Cancel: Select to exit the ? cursor Inserts can sions in NICAM Stereo. receive Hi-Fi sound transmis- However, if sound distortion occurs, due to poor reception, you can switch Off 1. Use v / V to select a program on the Program List then press ENTER. Program List options appears menu Program List on the left side of the menu. a select List Auto, option from then press ENTER. If you 'NICAM' appears on the menu screen. options position. b / B: Moves ? This DVD recorder Program menu. space at the cursor position. Delete: Deletes the previous character at the Space: the NICAM Auto/Off 2. Use v / V to select 'Nicam Auto/Off' ? ? Setting then press ENTER. option from Program List The Program is deleted. cursor to left or right. Tip Remote control buttons for Numbers ing (0~9): Enters location on entering a name the character of correspond- the selected column. 4. Choose 'OK' icon then press ENTER to fix the and returns to the Program List menu. name 19 DVRSETUP Pre-operation Setup (Continued) Clock Set 1 2 3 4 5 6 Display Press SETUP. The Setup menu Display Use v / V to select the General Moves the cursor to the previous next column. (up/down): Changes cursor position. the setting at the current Press ENTER to confirm your setting, then press SETUP to exit the Setup menu. TV Aspect You can can works only when the TV Aspect choose: Letter Box: Pan Scan: option. Enter the necessary information for date and time. (left/right): setting picture with bands on the upper and lower portions of the screen. Automatically displays the wide picture on the entire screen and cuts off the portions Displays a wide that do not fit. to the third level. move v / V - - to the second level. Press B to or - is selected, press B to option Use v / V to select the Clock Set b / B 7 You menu. - move Mode Ratio is set to "4:3". appears. While the General Mode Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks, but are connecting the recorder to a standard (analog) television, set Progressive Scan to [OFF]. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to [ON]. Ratio choose: 4:3: Select when a standard 4:3 TV is connected. 16:9: Select when a 16:9 wide TV is connected. Caution Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the recorder. First, remove the disc in the recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. 20 Pre-operation Setup (Continued) PBC Language The PBC (PBC) - ON: setting to ON or can be changed. Set Playback Control OFF. Video CDs with PBC are to the played according PBC. - Select a language for the Setup menu and on-screen display. OFF: Video CDs with PBC as Display Language are played the same DVRSETUP way Audio CDs. Disc Select Language a language for the disc's Menu, Audio, and Subtitle. [Original]Refers Factory disc Set If you need to, you can reset the Recorder to all its factory settings. Select ''Set'' icon then press ENTER. Note : Some Area options Code) cannot be reset. (Rating, Password, and was to the original language in which the recorded. language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see page 52). If you enter the wrong language code, press CLEAR. [Other] [Off](for To select another Disc Subtitle) : Turn off Subtitle. 21 Pre-operation Setup (Continued) DRC Audio (Dynamic Range Control) With the DVD Each DVD disc has Set the recorder's audio system you Dolby Digital variety of audio output options. Audio Output according to the type a of use. / DTS / MPEG Select "Bitstream" if you connect the recorder's DIGITAL AUDIO OUT jack to an amplifier program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to [ON] for this effect. format, you can hear a [Bitstream]: or other equipment with a Dolby Digital, DTS or Set Vocal to MPEG decoder. [PCM] (for Dolby Digital nected to a encoded in cally two-channel Dolby Digital / MPEG): Select when condigital stereo amplifier. DVDs or MPEG will be automati- downmixed to two-channel PCM audio. [Off] (for DTS): If you select "Off", the DTS signal not output through the DIGITAL OUT jack. is Sampling Frequency If your receiver or amplifier is NOT capable of handling 96 kHz signals, select [48 kHz]. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select [96 kHz]. When this choice is made, this unit will pass each type of signal through without any further 22 processing. Vocal DVD is [ON] only when a multi-channel karaoke playing. The karaoke channels on the disc will mix into normal stereo sound. Pre-operation Setup (Continued) Lock If you (Parental Control) If you your password, to clear the current password, follow the procedure below. Set Password Changing the code forget your 4-digit 4-digit forget 1. Press SETUP to code display the Setup menu. 2. Use the Number buttons to enter the number 6-digit "210499". 3. Select "Ok" then press ENTER. The 4-digit is cleared. Enter a new code as shown left. password Rating Movies DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain 1 2 3 4 5 6 Press SETUP. The Setup menu While the Lock move Ratings option. is selected, press B to to the second level. option Use v / V to select the Set Password Press B to move password yet; using the numbered buttons to create a personal 4-digit security password, then press ENTER. Enter the 4-digit password again and press ENTER to verify when "OK" is highlighted. If you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted. repeatedly mistake before to delete 9 While pressing ENTER, password numbers one by press b one is selected, press ENTER. If you select "Delete" then press ENTER. The password is deleted. Enter "Change" alternate 1 2 Follow steps 1-3 repeatedly to delete being played played with shown above to the left (Set Rating option. to the third level. move 6 as shown above to the left Eight (8) has the least has the most restrictions. restrictions. playback No limit: If you select No limit, Parental Control is not active. The disc will play in full. Level 1 to 8: Some discs contain scenes not suit- able for children. If you set a rating for the Recorder, all disc scenes with the same rating lower will be 4-digit password again to verify when "OK" is highlighted. pressing ENTER, press password numbers one by as Use v / V to select the tons. One and press mistake before The Parental Control Password). played played. Higher rated unless an alternate disc. The alternate ing a rated scenes. Follow Tip If you to 3 step (Set 4 Password). 5Selectaratingfrom1to8usingthev/Vbut(1) playback 4-digit password using the numbered buttons to create a personal 4-digit security password then press ENTER when "OK" is highlighted. ENTER scenes are feature allows you to prevent discs from by your children or to have certain discs a Enter the or a then correct it. 8 country-dependent. are Press B to a the disc. These disc to the third level. If you have not entered Enter a 4-digit password If you make complete option. Tip 7 scenes on to the from Level 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. appears. Use v / V to select the Lock applies or a lower one. scene If no scene one password the is available suitable alternate found, playback will stop. You change will not be on the must have the same rat- b or scenes or scene must enter the rating level in order is 4-digit to play the disc. then correct it. 6 Press ENTER to confirm your rating selection, then press SETUP to exit the menu. 23 DVRSETUP Pre-operation Setup (Continued) Area Code DivX(R) Enter the code of a country/area used to rate the DVD video (See "Area whose standards disc, referring were to the list Codes", page 52.). VOD DivX We provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. 1. Select 2. Press ENTER while [DivX(R) VOD] option then press B. is selected and the reg- [Enter] istration code will appear. 1 2 3 4 5 6 Press SETUP. The Setup menu appears. Use v / V to select the Lock While the Lock move option. is selected, press B to to the second level. option Use v / V to select the Area Code 3. Use the videos from DivX option. code to registration move a Tip a mistake before repeatedly to delete pressing ENTER, press password numbers one by b one then correct it. 7 Select the first character 8 Shift the 9 Press ENTER to confirm your area code selection, then press SETUP to exit the menu. using the v / V buttons. second 24 using B buttons and select character using v / V buttons. cursor a disc for playback on this unit. password yet; using the numbered buttons to create a personal 4-digit security password, then press ENTER. Enter the 4-digit password again and press ENTER to verify when "OK" is highlighted. If you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER when "OK" is highlighted. If you rent the www.divx.com/vod. Follow the instructions and to the third level. If you have not entered Enter a 4-digit password or VOD service at download the video onto Press B to purchase the Note: All the downloaded videos from DivX be played back on this unit. VOD can only Pre-operation Setup (Continued) Recording Auto Record Mode Set When You 10 minutes, es automatic recording, chapter markers are put in at the specified interval. You can set this interval to 5 minutes, picture quality for recording; HQ (High Quality), SQ (Standard Quality), LQ (Low Quality), EQ (Extend Quality). can set the Record Aspect When recording, 4:3 standard). Chapter or 15 minutes. If you select chapter marking off, no None, it switch- separations. DVRSETUP Ratio you can set the recording aspect ratio to suit the material you're recording (16:9 widescreen, or DV Record Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN port. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for over-dubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the over-dubbed sound is used. 25 Pre-operation Setup (Continued) Disc Caution If you want to change the disc format, recorded on the disc will be erased. Initialize If you load a completely blank disc, the "Initialize" will appear. Select "Ok" then press ENTER. The menu Recorder will initialize the disc. Disc Protect DVD-R: The Recorder initializes the disc for Video When mode. The matted DVD-RW recording mode will always be Video mode. DVD-RW: The Recorder initializes the disc for VR mode. (DL) / DVD+RW: The Recorder initializes the disc. Also, you can format the disc from the Setup menu as below. 1 2 Press SETUP. The Setup menu appears. Use v / V to select the Disc While the Disc move option. is selected, press B to to the second level. option 3 4 5 highlighted. 6 DVD-RWs, 7 (DVD-VR DVD-Video) Use v / V to select the Initialize Press B to move option. to the third level. "Start" icon is Press ENTER. Initialize menu For appears. use b / B to select a mode then press ENTER. For DVD+RWs, go to step 8. or 8 Use b / B to select "Ok" then press ENTER. It takes a few moments to format the disc. 26 recording in DVD+RW / +R disc disc, set to ON to or VR mode for- prevent accidental of the disc loaded. If you need to unlock the disc to make edits, select OFF. recording, editing DVD+R everything or deleting Pre-operation Setup (Continued) Finalize Disc Label Finalizing 'fixes' the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu for navigating the disc. This is accessed by pressing Use this to enter MENU/LIST or TITLE. for the disc. This a name name appears when you load the disc and when you disc information on-screen. ? ? The disc display be up to 32 characters long. For discs formatted on a different DVD Recorder, you will see only a limited number of characters. name can Caution After you've DVD-RW, record finalized a DVD+R or a anything else disc recording on a DVD-R, you can't edit that disc except on a (DL) disc, on or DVD+RW disc. Follow 1 steps 1-3 shown Initialize as Use v / V to select the Disc Label 2 3 4 Keyboard Press B to 1 2 3 4 Follow steps 1-3 as shown on page 26 "Edit" icon is (Initialize). Press B to move option. option. to the third level. highlighted. menu appears. to the third level. highlighted. Press ENTER. Finalize menu appears. 5 5 page 26. Press ENTER. Use v / V to select the Finalize Finalize is move on Select "Ok" then press ENTER. The recorder starts finalizing ? the disc. ? long finalization takes how much is recorded titles on the disc. A 4 minutes or more on depends the heavily disc, on the type of disc, ? can doing this, you Small: Switches the to keyboard to lower characters. Symbols: Switches the keyboard Cancel: Select to exit the If you load a DVD-RW that has already been finalized, you can 'unfinalize' it by choosing Unfinalize from the edit and Alphabet keyboard characters. ? ? can case Switches the OK: Select to finish. to finalize. After Alphabet Capital: ? Tip menu. character then press ENTER to confirm your selection. to symbol char- acters. take up to ? Finalize for the disc. Use vVbBto select a case and the number of recorded disc a name upper Note : How Enter space at the cursor position. Delete: Deletes the previous character at the Space: cursor ? re- Inserts menu. a position. b / B: Moves cursor to left or right. record onto the disc. 6 Choose OK then press ENTER to and return to the Setup menu. 7 Press SETUP to exit the save the name menu. 27 DVRSETUP Pre-operation Setup (Continued) Overview for the On-Screen This manual Disc Information On-screen Display You operating the DVD Recorder. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD loaded Recorder 2 or gives is not available Displaying on viewing display the 1 the disc. Information While While to basic instructions for can Watching TV the TV channels, press ENTER information displayed on-screen. Indicates channel Display various information about the disc display on-screen. Press DISPLAY information To repeatedly to display/change displayed on-screen. the the On-Screen Display, press DISPLAY repeatedly until it disappears. See the descriptions on the following pages for detailed explanations of displays as a disc is playing. remove Recorder Status Icon number, station Resume name, and audio signal (STEREO, MONO) received by the tuner. Action play Displays from this prohibited or point not available PR-06 STEREO Notes : ABC Some discs may not provide all of the features on the On-Screen Display, examples shown the below. If no button is Display 01/01/2005 will pressed disappear. for 10 seconds, the On-Screen 13:35 Indicates current date and time. DVD Menu VR Video +RW +R Function (Use v / V to select desired option) Options Title Number 1/6 Chapter Number 4/26 Time Search 00:10:30 Audio Language (DVD only) and Digital Audio Output Mode Subtitle Language Angle D 2CH ABC OFF NORM Selection Method Shows the current title number and total number of titles, and skips to the desired title number. b/B,or Numbers, ENTER Shows the current chapter number and total number of chapters, and skips to the desired chapter number. b/B,or Numbers, ENTER Shows the elapsed playing time, and searches the point by the elapsed time directly. Shows the current audio soundtrack language, encoding method, and channel number, and changes 1/3 Sound DivX the the b/B setting. Shows the current subtitles language, and changes Numbers, ENTER b/B setting. Shows the current angle number, total number of angles, and changes the angle number. b/B Shows the current sound mode, and b/B changes the setting. VCD Menu Function (Use v / V to select desired option) Options Track Number 1/6 Time 00:10:30 Shows the current track number and total number of tracks or PBC On mode, and skip to the desired track number. Shows the elapsed playing time, and searches the Audio Channel Sound 28 Stereo NORM point by the elapsed time Shows the audio channel, and changes the audio channel. Shows the current sound mode, and changes the setting. directly. Selection Method b/B,or Numbers, ENTER Numbers, ENTER b/B b/B DVD and Video CD DVD Video CD or Operation General Features Playback Playback Setup Turn the TV on Note : and select the video input source con- nected to the DVD Recorder. Audio the System: Turn the Audio System on and select input source connected to the DVD Recorder. Unless stated otherwise, all operations described use the Remote Control. Some features may also be available on the Setup menu. TITLE Selection 1 2 3 Press OPEN/CLOSE (Z) to open the disc tray. DVD If Load your chosen disc in the tray, with the playback side down. Press OPEN/CLOSE READING appears starts playback start, press N In some on (Z) cases, the disc does not playback might menu menu displayed may be displayed first after Video CD that contains a menu. loading DVD a or DVD Use the bBvVbuttons to select the want to view, then press ENTER Press TITLE or can move to follows: use v / V to select the title Then, press the appropriate numbered button (0-9) or b / B to select a title number. a title on a to title/chapter start playback. MENU/LIST to return to the disc has more than one chapter/track, you chapter/track as follows: Press SKIP (. or >) briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press SKIP (.) twice briefly to step back to the previous chapter/track. To go directly to any chapter/track during playback, press DISPLAY. Then, use v / V to select chapter icon (or for a Video CD, select track icon). Then, enter the chapter/track number using the numbered buttons (0-9) or press b / B. Tip A title, you appear If is one icon. can move a menu as than +R CHAPTER/TRACK Selection instead. If more +RW Press DISPLAY then tray. the display window, and If disc has another title to close the automatically. (PLAY). a VR Video you menu display. to another VCD Use the number buttons to select the track you want to view. Press RETURN (O) to return to the display. Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on each menu Setup 2. Press SCAN (m or M) during playback. (m required speed. or M) repeatedly 3. If Parental Control is set and the disc is not within the the 4-digit To exit SEARCH page 23). DVDs may have a Region Code. Your recorder will not play discs that have (see on code different from your recorder. The this Recorder is 2 (two). 2. region region code mode, press PLAY. Frame-by-Frame Playback 1. Press PAUSE/STEP code must be entered and/or the disc must be authorized to select the DVD, DivX; 4 steps (forward and backward) Video CD; 3 steps (forward and backward) Still Picture and Rating settings (not authorized), -- Press SCAN menu. Notes : "Rating", 1. menu screen. You may also set PBC to OFF in the See page 21. -- Search (X) on the remote control dur- ing playback. Advance the picture frame-by-frame by pressing PAUSE/STEP (X) repeatedly. To exit PAUSE mode, press N (PLAY). a for 29 PLAYBCK DVD and Video CD General Features Operation (Continued) Time Search (Continued) The Time Search function allows you to start at any chosen time on the disc. Slow Motion 1. Press PAUSE/STEP (X) during playback. 1. Press DISPLAY The Recorder will enter PAUSE mode. 2. Press SCAN (m M) during or (m or appears on the TV screen. The Time Search box shows the elapsed PAUSE mode. to select the M) required 2. Within 10 steps (forward and backward) 4 steps (forward only) Video CD; 3 steps (forward only) 4. To exit Slow Motion mode, press N (PLAY). The "--:--:--" 3. Within 10 the Note : playback in reverse is not 4 Repeat - the current Title: current title repeats the Off: does not repeat mode. chapter. Repeat - a Track/All/Off desired repeat the or in the (DivX disc). does not play repeatedly. To repeat menu to PBC, you use the Repeat function. See page an seconds, press ENTER to confirm the start a VR Video +RW on +R during playback or still Each press of the ZOOM button the sequence shown below. → x4 size → 3. To the disc. VCD playback to acti- the TV display a title: at your chosen icon and 'A-B' appears screen. ending point. on the TV screen, and repeat sequence begins. repeatedly to in normal size move through the picture. resume ZOOM changes normal repeatedly press CLEAR or press until the normal picture appears. playback, The Zoom function may not work for sequence in again starts from the selected time Note : 3. To cancel the sequence, press A-B select Off. 30 Within 3 must set PBC to OFF in A-B 2. Press A-B the invalid time. not enter can in the box. 2. Use the bBvVbuttons to 1. Press A-B at your chosen starting point. Repeat icon and 'A-' appears on the TV Repeat You x2 size 21. Repeat right zoomed Video CD with Setup hours, minutes, and vate the Zoom function. Note : a the number buttons to enter start time. Enter 1. Press ZOOM mode. repeats the current track. All: repeats the all tracks on the Video CD On use The Zoom function allows you to enlarge the video image and to move through the enlarged image. Track: Off: appears in the Time Search box. seconds from left to DVD . folder ? Display. Zoom play repeatedly. Press REPEAT to select ? desired a Chapter: repeats Video CDs, DivX ? display seconds, required Playback Repeat Chapter/Title/Off Press REPEAT to select ? v / V to select the Time time. DVD Discs ? use If you enter the wrong numbers, press CLEAR. Then enter the correct numbers. with possible Video CDs. ? seconds, Search icon in the On-Screen 4 Slow motion playing time of the current disc. speed. DVD; DivX; The On-Screen during playback. Display The DVD Recorder will enter SLOW mode. 3. Use the SCAN playback some DVDs. DVD and Video CD General Features Operation (Continued) (Continued) Camera Marker Search You nine can points To enter 1. start playback from a memorized point. Up to be memorized. can 1. Press DISPLAY During disc playback, press MARKER when playback reaches the spot that you want to 2. on the TV briefly. points Display. 3. Use b / B to select the desired on a The number of the current disc. angle. angle appears on the TV screen. To Recall or 1. disc Clear Marked Scene a Changing press SEARCH. The Marker Search menu will appear on the TV During playback, 2. Within 10 seconds, use b / B to select the marker number that you want to recall or clear. 3. Press ENTER and playback starts from the marked Or, scene. the Audio Soundtrack Press CLEAR and the marker number is audio soundtrack if available. Note : Some discs feature both tracks. There is erased from the list. play any marker the marker search menu. can by inputting its number on Recorder to the Contents of DVD Video Discs: Menus no Dolby Digital and DTS soundanalog audio output when DTS is selected. To listen to the DTS a soundtrack, DTS decoder via puts. See page Reviewing DVD Press AUDIO then press b / B repeatedly during playback to hear a different audio language (DVD only) or screen. 4. You The On-Screen appears on the TV screen. 2. Use v / V to select the Angle icon in the On-Screen screen 1 to enter up to nine Marker Repeat step during playback. Display memorize. The Marker icon will appear If the disc contains sequences recorded from different camera angles, the angle icon appears briefly on the TV screen. You can then change the camera angle if you wish. mark, follow these steps. a Angle DVD one of the connect this digital out- 15 for connection details. Audio Channel Selection Video VR +RW +R VCD DVDs may contain menus that allow you to access special features. To open the disc menu, press MENU/LIST. Then, press the appropriate number button Press AUDIO then press b / B repeatedly during playback to hear a different audio channel (STEREO, LEFT to select an or highlight your selection, then press ENTER. option. Or, use the bBvVbuttons to RIGHT). With DVD-RW discs recorded in VR mode that have both Title Menu Bilingual audio channel, you can switch among Main (L), Sub (R), Main+sub (L+R), or Mono by pressing AUDIO. DVD a main and a 1. Press TITLE. If the current title has on the TV menu, the menu will appear Otherwise, the disc menu may screen. a appear. 2. The may contain camera guage and subtitle options, and menu Disc Menu angles, spoken lanchapters for the title. DVD 1. Press MENU/LIST. The disc 2. To menu remove is displayed. the disc menu, press MENU/LIST again. 31 PLAYBCK DVD and Video CD Operation (Continued) 3D Surround This unit can PIP produce 3D Surround a playback conventional stereo instead of the five speakers, speakers normally required more channel audio from 1. Press DISPLAY a DVD effect, which simulates multi-channel audio VR Video +RW +R VCD from two This function enables you to view the stored stations in the sub picture during playback. or to listen to multi- Home Theater (Picture-in-Picture) System. The On-Screen during playback. appears on the TV screen. 2. Use v / V to select the Sound icon in the On-Screen Display Display. 3.Useb/Btoselect"3DSUR". To turn off the 3D Surround Subtitles DVD effect, select "NORM". DivX Press SUBTITLE then press b / B repeatedly during playback to see the different subtitle languages. Instant DVD Skip Video PIP On and Off Turning Press PIP to switch VR +RW Each press INSTANT SKIP skips +R again VCD forward 15 seconds. Input on the sub picture, press PIP to switch it off. source selection for sub picture Press AV to select the Note : If appears, the feature is not available on the disc. input source for the sub picture. Each time AV is pressed, each input source available for the sub picture is displayed as shown below. Last Condition Memory This Recorder memorizes the user Tuner→AV1→AV2→DV DVD settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the Recorder or switch off the Recorder. If you load a disc that had its settings memorized, the latest stop position is automatically recalled. -- stored in memory for use any time. This Recorder does not memorize settings for a disc Settings are if you switch off the Recorder before play the disc. 32 Use PR selection for sub (v / commencing to picture the program if sub picture's is Tuner. The selected program number V) input source is displayed on to change the TV selected program Sub Notes : -- Program screen. by pressing You display (x). can STOP picture position change Press b / B repeatedly until desired position is achieved. The sub picture moves clockwise or counterclockwise. the Playing DivX Movie Disc a this DVD Recorder you can play back DivX files the CD-R/RW or DVD±R/RW. Before playing DivX Using on files, read "About DivX movie files" on the Press SETUP. The 2. Press select right. Setup menu appears. SETUP b [LANGUAGE] b [Disc Subtitle] the language you have found. Refer to "Disc Menu/Audio/Subtitle" on Note: This recorder cannot Memory back the DivX file(s) in the card. Insert 1 play a The MOVIE menu the TV on display properly after the proceeded, press and hold SUBTITLE about 3 seconds during playback. The new language code number selected is displayed on upper-right of the TV screen. steps tray. appears page 21. Tip: If the subtitle still does not disc and close the then screen. 1-2 code Language for change sequency Hungarian, Czech and Polish: LANGUAGE 1 b code Language LANGUAGE 1 b LANGUAGE 2 for Russian: change sequency LANGUAGE 2 b LANGUAGE 3 About DivX movie files Press v / V to select 2 folder, and press ENTER. a A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use v / V buttons on the remote to as The file (W ? name If there is H) pixel. of the DivX subtitle is available impossible code displayed as ? disc with mixed content and DivX you can select menu screen. Press word on top on the menu is highlighted. a b / B to select use MP3/WMA, JPEG, MOVIE then press ENTER. You can view TV channel or video pressing ? files), TITLE and Then, (MP3/WMA, JPEG, If the number of the RETURN input by title does not a subtitle suitable Disc Subtitle on the Disc Subtitle figure Language Available DivX Subtitle Original, English English French, German, Italian, Spanish, French, German, Italian, Spanish, Portuguese Portuguese Dutch, Swedish Russian Russian Other 6976 Greek Other 7665 Polish, Hungarian, Czech Other 8482 Turkish audio is outputted. Playable DivX subtitle: ".smi", ".srt", ".sub (Micro DVD, Subviewer 1-2 format only)", ".txt (Micro DVD, T1-4 format only)" played DivX file: on Playable support GMC. ".avi", ".divx" except those listed above is the TV not dis- screen. Codec format: "DIVX3.xx", "DIVX4.xx", "DIVX5.xx", "XVID ", "3IVX". for the DivX below. or ? when the DivX sub- language operate normally. Playable ? Find 30 per 1 ? ? following notice display properly. over file, display. This recorder does not the DivX subtitle Please refer to 47 If the video and audio structure of recorded file is not Divx subtitle displaying the on ? menu, press MENU/LIST. Notice for not interleaved, either video If you want to return to the (O). mark frame is screen or source " _ second, this unit may a by to express in the DivX " it may be Tip: 1. x characters. Press STOP to exit. On with this recorder is limited follows: 720x576 ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. compatibility ?A vailable resolution size of the DivX file is under and highlight press ENTER. 3 4 DivX disc Playable Audio format: "Dolby Digital", "PCM", "MP3", "DTS (DIGITAL OUT only)" ? Sampling frequency: ? Bit rate: within 32 - within 8 - 48 kHz (MP3) 320kbps (MP3) 33 PLAYBCK Audio CD and MP3/WMA Playing file Audio CD an MP3 CD or Operation MP3/WMA Additional WMA this DVD Recorder you can play back MP3/WMA files on the CD-R/RW or DVD±R/RW. Before playing on the Deletes the selected file form the memory card. : Deletes all files form the memory card. MP3/WMA on Recordings" right. Also, you (To files, read "Notes use view MP3/WMA files in the memory card. can memory card, see page 9.) ited Once you insert an audio CD screen. Press v / V to select (PLAY) Notes MP3/WMA on MP3 / WMA disc Audio CD N for memory card : Using MP3/WMA options ENTER and or a menu a on appears track then press playback TV ? as Recordings compatibility with this player is lim- follows: within 32 48 kHz (MP3), Sampling frequency: 32 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 32 192kbps (WMA) - within - ? starts. - - ? The recorder cannot read a file extension other than ".mp3" / ".wma". ? CD-R ? If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is physical impossible mend that an ? ? format should be ISO 9660 playback MP3 / WMA files. We recomyou use Easy-CD Creator, which creates to ISO 9660 file File names must MP3 / WMA MP3/WMA file that has an They system. should have incorporate should not a maximum of 8 letters and .mp3 or .wma extension. contain special letters such as an / ? * "<>letc. 1. Press v / V to select see 2. folder, and press ENTER to the folder contents. Press v / V to select or a ENTER. Playback a ? The total number of files on the disc should be less than 999. track then press N (PLAY) starts. This DVD recorder requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be Tips If you in Folder are a file list and want to return to the and press highlight ENTER to return to the previous menu screen. Pressandholdv/Vtogotothenext/previous list, use the v/V to page. On a disc with mixed content and DivX you can select menu screen. Press word on top on the menu is highlighted. files), TITLE and Then, (MP3/WMA, JPEG, use a b / B to select MP3/WMA, JPEG, MOVIE then press ENTER. You can view TV channel or video pressing RETURN (O). menu, press MENU/LIST. 34 input or source by If you want to return to the sought from the copyright owner. : Audio CD and MP3/WMA Pause MP3 CD WMA 1. Press PAUSE/STEP (X) during playback. 2. To return to playback, press PAUSE/STEP (X) again. Track Selection Press SKIP . N > (PLAY) MP3 CD or Operation (Continued) or press PLAYBCK WMA briefly during playback to go to the next track beginning of the current track. or Press SKIP . twice step back briefly to to return to the to the pre- vious track. On an Audio CD, track number ing playback to go directly to any the numbered buttons using enter the track, (0-9) dur- the Track List. on Repeat Track/All/Off MP3 CD WMA Press REPEAT to select ? TRACK: ? ALL ? OFF a desired repeat mode. repeats the current track. repeats the all tracks on the disc. : (No display): Search does not play repeatedly. CD 1. Press SCAN (m or M) during playback. The Recorder will enter SEARCH mode. 2. Press SCAN (m or M) to select the required (backward) or MX2, speed: mX2, mX4, mX8 MX4, MX8 (forward). Search speed and direction are indicated on the menu display. 3. To exit SEARCH Repeat To repeat A-B mode, press N (PLAY). a MP3 CD sequence in a WMA track: 1. Press A-B at your chosen starting point. Repeat icon and 'A' appears on the menu 2. Press A-B The again at your Repeat icon and 'A screen, and the chosen - ending point. B' appears on the Repeat menu repeat sequence begins. 3. To exit the sequence and return to normal A-B again. The screen. icon disappears from the play, press menu screen. 35 Audio CD and MP3/WMA Operation (Continued) Repeat Programmed Programmed Playback The program function enables you to store your favorite tracks from any disc in the recorder's memory. A program can contain 99 tracks (Audio CD) or 256 tracks (MP3/WMA). 1. 2. 3. Insert a 1. can disc. ? Audio CD ? Select a track " Select menu appears. the List. on icon then press ENTER to place the selected track on the Program list. Repeat to place You can "" a disc. The repeat icon a desired repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on programmed list. does not Off(No display): play repeatedly. If you press SKIP (>) once during back, the repeat playback cancels. Erasing add all tracks in the disc. Select 1. icon then press ENTER. previous playing Repeat Track page. 2. a Track from Program List Use vVbBto select the track that you wish to erase from the Program list. Press CLEAR. ENTER to list. Select " the Or, select erase to Repeat Erasing " " icon then press the selected track on the Program erase additional tracks Complete Program on the list. List ", then press ENTER. The complete Program for the disc is erased. Note: The programs removed. Example) 5. Press N (PLAY) or Audio CD ENTER to start. Playback programmed the in the order in which you tracks. Playback stops after all of the tracks begins Program 36 list have play- the list. Select the track you want to start playing on the Program list. Press and hold v / V to move to the next / disc. Note : " on on a Press REPEAT to select ? MP3/WMA track/all a Press REPEAT when Audio CD and MP3/WMA Discs: or play appears. 2. additional tracks 4. You Tracks played once. on the are also cleared when the disc is JPEG File Viewing Operation JPEG file a Notes Using this DVD Recorder you can view JPEG files on the CD-R/RW or DVD±R/RW. Before playing JPEG read "Notes files, Also, you Insert JPEG Recordings" see appears the TV on JPEG upon the size and number of JPEG files, it could take a long time for the DVD Recorder to read Depending right. card. (To too large --- reduce the resolution of the JPEG files to less than 5M tray. The JPEG Recordings the disc's contents. If you don't see an on-screen display after several minutes, some of the files may be the 9.) page disc and close the a on view JPEG files in the memory can memory card, use 1. on ? on menu pixels as 2760 x 2048 pixels and burn another disc. screen. ? The total number of files and folders on the disc should be less than 999. ? Some discs may be incompatible due to recording format or the condition of disc. ? Ensure that all the selected files have the sions when ? File Press v / V to select folder, then press ENTER. A list of files in the folder appears. If you are in a file a list and want to return to the the v / V buttons on previous Folder list, remote to highlight the are them names be read 2. different ".jpg" exten- layout. If the files have rename ? into the CD copying a by shown ".jpe" or ".jpeg" extensions, please as ".jpg" file. without ".jpg" extension will not be able to this DVD Recorder. Even as JPEG image though files in Windows the files Explorer. use then press ENTER. If you want to view a particular file, press v / V to highlight a file then press ENTER 3. N (PLAY). The selected image is or displayed in full screen. Press ENTER to appear To 4. stop viewing The at any menu screen disappear or this menu. time, press STOP. appears. Tip: ? If you list, are use in file list and want to return to the Folder the v/V to return to the ? a and highlight previous menu screen. press ENTER to Pressandholdv/Vtogotothenext/previous page. ? On disc with mixed content a DivX files), word you can and a use b / B to select on top select on the (MP3/WMA, JPEG, Press TITLE menu screen. menu is and highlighted. Then, MP3/WMA, JPEG, or MOVIE then press ENTER. ?Y ou can pressing view TV channel RETURN (O). or video input source by If you want to return to the menu, press MENU/LIST. 37 PLAYBCK JPEG File Slide Show Use v V b B to JPEG Operation (Continued) JPEG the highlight (Slide Show) then press ENTER. Slide Show starts from the selected file if ? to the There are four Slide > Speed options ( (Slow) and II (Off). Use v V b B to use STOP viewing a file, you can press previous menu (JPEG menu). (Normal), Then, Speed option While (Off). move >> the menu is not II to on highlight the ) : >>> Speed options ( option you want b / B to select the (Fast), ). to use then press ENTER. Still Picture JPEG Press PAUSE/STEP 1. The recorder will 2. during slide show. go into PAUSE mode. now To return to the slide show, press N (PLAY) press PAUSE/STEP again. to another File Moving JPEG Press SKIP cursor viewing to the next a (. or >) or picture to advance To rotate Press v / V during showing Zoom or (b B) once while or previous file. or JPEG picture ture clockwise or a picture to rotate the pic- counter clockwise. JPEG Use ZOOM to enlarge the photo image. (see 30 page) To listen to music while slide show simultaneously You display photo can music files recorded Select files while on a listening to MP3/WMA disc. icon then press ENTER Additional 38 JPEG options on the JPEG menu. for memory card : Copies the selected file to the memory card. : Copies all files to the memory card. : Deletes the selected file form the memory card. : Deletes all files form the memory card. Basic Basic Recording from TV channels Recording Follow the instructions below to record Recording starts disc is full or Switch 1 TV program. and continues until the easily a recordable disc. that the TV's input source is set to completely blank disc, sure this recorder. If you load a the recorder takes a short while to initialize the disc. 2 3 Set 2 Follow steps 1-4 from TV a shown left (Basic Recording channels). Press REC (z) repeatedly to select the recording time length. Recording starts after the first press. Each additional press increases the recording time by Use PR At the end of the (+/-) buttons to select the TV channel to can the DVD Recorder will TV Audio Channel select the audio channel AUDIO during viewing channel is displayed or mono Bilingual recording, stop recording and shut off. record. Stereo TV program. The by cur- on-screen. broadcast: Stereo broadcast: Main+Sub to listen (language) → → Left Main Right → → Sub If the sound is of poor quality when set to can often improve it by changing to Mono Instant Timer Stereo, you (Left Checking or Right). Press REC This recorder remaining record either NICAM can audio. If the NICAM setting (page 18) then if the broadcast is cally changes ular audio is or regular is set to to NICAM and you can Auto, non-NICAM, the reg- If NICAM sound distortion occurs, due to poor reception, you can switch off NICAM setting of the program. Press REC 4 Recording (z) (The display window.) Recording continues REC indicator lights a (x) To Pause the displayed recording on the TV time. The screen for a recording ing REC (z). time Recording can be extended Time anytime by press- Each additional press increases the recording time 10 minutes within the available free space. by Caution If the Recorder is until you press STOP (x) or while the unplugged (or Recorder is recording, there is power failure) the recording will be a lost. fixed Recording Press STOP time will be The in the the disc is full. Timer to check the once once. will start. To record for (z) Menu Time Recording To Extend the record the recorded. always the Recording moment. NICAM, the audio automati- NICAM audio. If the broadcast is 5 as 10 minutes within the available free space. The recording time is displayed on the TV screen. rent audio ? a allows you to make a recording without using the program recording mode as necessary by pressing REC MODE repeatedly. (HQ, SQ, LQ, EQ) HQ; High Quality, SQ; Standard Quality, LQ: Low Quality, EQ: Extended Quality pressing ? 1 a Changing You of Recording preset length timer. the recorder and load Also make Recording Instant Timer a immediately you stop the recording. on Instant Timer on to length right. of time, see Instant stop recording. Recording 1. Press PAUSE/STEP (X) to pause the disc during recording. 2. When you want to continue PAUSE/STEP (X). recording, press 39 RECODING Timer Recording This DVD Recorder be can programmed to record up to 7 programs over a period of 1 month. For unattended recording, the timer needs to be set with the channels to be Enter the necessary information for your timer 2 recording(s). ? recorded, the starting time and length. ? Note: ? If you blank disc for timer completely use a you must format the disc before (Refer to "Initialize" on page 26.) recording, starting timer recording. ? menu -- Press ENTER after filling Press TIMER REC to programming, will appear. Check field's "Rec. OK" indicates that the timer Choose memorized program number, or of the external inputs from which to record. -- one Date ? Start Time -- ? End Time ? Mode EQ, AT -- -- -- a Set the Set the Choose AT). (Auto) mode a recording starting recording ending record mode is available and switches record complete recording mode, if ? ? ? ? 40 When you set the VPS/PDC mode is not available. Repeat (Monday Choose -- - Friday), a desired or option to On, AT repeat (Once, Daily Weekly). programmed recordable disc is inserted. (O) to exit the Program List. Notes : The timer indicator the Recorder is in the timer active. ?Y Note : is 5 neces- the program. recording Make sure that you load a recordable disc and press POWER to switch your unit to Standby. time. determines how much disc time a the Timer Record List 4 time. (HQ, SQ, LQ, and on the Timer Record List Press RETURN date up to 1 month in advance. or sary, to correctly a Choose ? Timer Record List. Press ENTER, the program will be memorized by the DVD Recorder. To check the PR display will appear. 3 ? in all the program infor- mation. Press TIMER REC. The Timer Record (left/right) moves the cursor left/right v / V (up/down) changes the setting at the current cursor position Press RETURN (O) to exit the Timer Record -- menu. ? 1 b / B lights in standby with display window if the must press POWER to stop the timer recording. There is a short delay when a timer recording finishes to ou confirm the recorded program. If two timer recordings are set to record sequentially (one right after the other), the very beginning of the later program may not be recorded. Timer Recording (Continued) Timer Reviewing Programming Details Recording be checked whenever the DVD can Recorder is turned Press TIMER REC twice. on. ? Use v / V to select ? Press ENTER to edit the selected program. Timer Record menu appears. ? Press CLEAR to recording. RECODING the selected program from the Timer Record List. Canceling You can clear ing actually ? timer a a a remove Timer timer Recording setting anytime before the record- starts. Use v / V to select program you want to remove the Timer Recorder List. If you want to remove the a program, press CLEAR. The confirm message will appear. "Ok" then press ENTER. Timer Stopping a After recording timer a use Recording has b/B to select in started, you on Progress can still cancel the program. Press POWER. ? Timer Even Recording Troubleshooting though the timer is set, the Recorder will not record when: ? There is no disc loaded. ?Anon-recordable ? disc is loaded. Disc Protect is set to ON in the menu (see ? ? page 26). Power is turned Setup There on. already 99 titles (DVD-R/RW), (DVD+R/RW) recorded on the disc. are You cannot enter program for a timer ?Arecording is already underway. ? The time ? There If two ? ? 49 titles recording if: you're trying to set has already passed. are already 7 timer programs set. timer programs overlap: The earlier program takes priority. or more After the earlier program finishes, the later program starts. ? If two programs are set to start at exactly the time, the program entered first takes priority. If the disc is same damaged, the recording may not be pleted successfully. In this case even though the field shows "Rec. OK", it may com- Check not be. 41 from Recording can record from camcorder external 1 or External from External Recording You an an external A/V VCR, connected Input Source Components Recording device, such You as a to any of the Recorder's can from record from the DV IN port Digital Camcorder digital camcorder connected front panel of this Recorder. the Recorder's remote, you Camcorder and this Recorder. inputs. Using Make sure that the want to component you record from is connected properly Before to the DVD DV IN make recording, port is set up source signal to a the on a sure (see control both the can that the audio page input for the 25). Recorder. See pages 16. 2 Press AV repeatedly to select the external input Tips to record from. ? The ?T ? Some camcorders cannot be controlled uner: Built-in tuner ?A V1: AUDIO IN 1 / VIDEO IN 1 mounted ?A V2: INPUT 2 (VIDEO, AUDIO (L/R), mounted on front panel ?D V: DV IN mounted on front panel Load a on back S-VIDEO panel IN) 3 Select 4 pressing ?Y recording REC MODE mode as necessary Press REC once. will start. (The REC indicator lights in the 1 2 6 on Press STOP fixed (x) or You to a component port. length of time, see Instant Timer stop recording. input choose between Audio 1 can DV the the page 39. (x) from can't record date and time information from a DV is as require. you (original audio) and (over-dubbed audio). Input is set from the DV Rec Audio in sub-menu Setup menu. See DV Rec Audio on page 25 for more a remotely Check that the DV audio disc is full. Recording can't control this unit one. Make sure your Digital Camcorder is connected to the front panel DV IN port. See page 16. ? continues until you press STOP To record for cannot control the second DVD from this Audio 2 display window.) Recording DV a repeatedly. Quality (z) ou using cassette. by HQ; High Quality, SQ; Standard Quality, LQ: Low Quality, EQ: Extended ou second DVD Recorder a connected to the DV IN (HQ, SQ, LQ, EQ) 5 Recording If you connect ? ?Y the this using Recorder's remote. cable, you recordable disc. must be DVC-SD format. information. 3 Press AV 4 Find the repeatedly DV appears in the want to to select the DV display place on the the recording Note : For best If your source is copy-protected using CopyGuard, you will not be able to record it using this Recorder. See Copyright on page 9 for more details. you want to record. ? of window and on your the TV screen. Camcorder tape that you to start from. results, pause playback Depending on input. at the Camcorder, you point from which can use Recorder's remote to control the Camcorder this using the STOP, PLAY and PAUSE functions. 5 Press REC (z) once to start recording. automatically stopped if the Recorder detects no signal. ?Y ou can pause or stop the recording by pressing PAUSE/STEP (X) or STOP (x). You cannot ? Recording is control the Camcorder from this Remote Control during recording. ? In Video mode, the final frame of the recording may remain ? 42 displayed on screen for a while after recording stops. For timer recording to work properly on this Recorder, the Digital Camcorder must also be switched on and be operating. Recording from External an Input connect camcorder to this DV-equipped recorder using a single DV cable for input and output of audio, video, data and control signals. This Recorder is only compatible with DV-format (DVC-SD) camcorders. Digital Satellite Tuners, PCs, and D-VHS Video Recorders are not compatican (Continued) DV-Related What is DV? You Source a ? Messages You may see the following messages appear TV screen when using the DV IN port. on your Not connected to Camcorder The Camcorder is not connected properly, or the Camcorder is switched off. ble. ?Y a ?Y ou cannot connect than more one DV camcorder at time to this Recorder. ou cannot control this Recorder from external ment connected via the DV IN equip- ? It to always ed Camcorder via the DV IN ? Digital Camcorders stereo 16-bit/48kHz, can or control the connect- record audio can only record audio track. Set DV Rec Audio to Audio 1 ? one or stereo source component, or if the power fails in the the DV cable becomes discon- tape, equip- This Recorder cannot control the Camcorder. Audio 2 required (see page 25). Audio input to the DV IN port should be 32 or 48kHz (not 44.1kHz). Picture disturbance on the recording may occur if the source component pauses playback or plays an unrecorded section of Check the tape There is no cassette loaded into the connected Uncontrollable device as ? Camcorder. as twin stereo tracks of 12- bit/32kHz. This Recorder one to ment. port. usually just supports connection two port (including DVD Recorders). may not be possible Too many devices connected The DV IN port on this Recorder Updating Information Camcorder is information for DV. updating Camera mode Camcorder is set to camera mode. or Troubleshooting nected. ? Although DV Rec Audio is set to Audio 2 and Audio signal is not present, DV Rec Audio will be reset to Audio 1 automatically. 2 If you can't get a picture and/or audio port, check the bullet points: ? Make sure through the DV IN the DV cable is properly connected. connected equipment then ?T ry switching off the switching back on. ?T ry switching the audio input. Note : Depending on the connected be able to control it using Camcorder, you may the Remote Control not supplied with this Recorder. 43 RECODING Title List and List Menu Overview Chapter Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, and whether you're editing Original content, or a Playlist. There 123 45 67 two ways to edit VR mode DVD-RW discs. directly edit the Original content of the disc, or are You can you can create and edit a Playlist. The Playlist doesn't any of the content on the disc, but controls how the content is played back. actually change just Press MENU/LIST to 1. Playback should be display the Title List menu. stopped when you do this. When selecting titles, use the play the previous/next page if v / V buttons to dis- there are more than six titles. If you are editing a VR mode disc, press MENU/LIST to switch between Original and Playlist menu. On the left side of the main part of the screen are screen the menu options. 1. options: To display menu option, select a title or chapter then press ENTER. The options displayed differ depending on the disc type. [Chapter] Displays Chapter List of the title. [Combine] Combines two chapters into one (page 48). [Delete] Deletes the title or chapter. (page 47) [Delete Part] Deletes a part of the Title (page 47). [Divide] Divides a title into two (page 50). [Full Play] Starts playback of the selected title including the hidden chapters. [Hide (Show)] Hides (or Shows) the selected title or chapter. (page 50) [Move] Moves a chapter on the Chapter ListPlaylist menu to a position on the menu. (page 49) [Play] Start playback of the selected title or chapter. The hidden titles and chapters on the DVD+R/RW cannot be play back. [Playlist Add] Adds the title or chapter to the Playlist. (page 46) [Protect] Protects accidental recording, editing or deleting of the title. (page 49) [Title Name] Edits the title name. (page 48) [Title] Displays Title List of the chapter. 2. Indicates the record The shows thumbnails of the titles (or chapter) on the DVD. You can change these thumbnails using the THUMBNAIL button---see Changing Title Thumbnails on page 45. Press DISPLAY to title on display the Title List the information of selected menu. After selecting a title or chapter on the Title List or Chapter List menu, then press ENTER. The menu options appears on the left side of the menu. Use v / to select a option then press ENTER to confirm your V selection. 2. To exit the Title List menu, press RETURN (O) repeatedly. Menu mode, free space, and elapsed time progress bar. 3. Current media 4. Currently 5. Thumbnail 6. Shows the selected title number and total number of selected title. titles. 7. Shows the title name, recorded length. 44 date, and recording Title and Chapter Editing Edits you make to the Original content change the actual content of the disc. For example, if you delete a title or chapter that title from the Original content (Title Chapter), disc, freeing up or chapter is deleted from the extra recording time. When you edit the Playlist, on the other hand, you are not changing the content of the disc. For example, when you delete a title from the Playlist, you are just telling the Recorder not to play that title; nothing is actually deleted from the disc. or Titles, Chapters, Titles in the disc's content contain original one or more chapters. When you insert a title into the Playlist, all the chapters within that title also appear. In other words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are sections of Original or Playlist titles. From the Original and Playlist menu, you can add or delete parts. Adding a chapter or title to the Playlist creates a new title made up of a section (ie., chapter) of an Original title. Deleting a part removes part of a title from the Original or Playlist menu. Caution ? When editing using the Delete, Add, or ? as you may notice a momentary pause between edits. This is not a malfunction. During Playlist playback, You +RW +R chapter marker anywhere in a Playlist or Original title during playback. Once the chapter is marked, you can use the Chapter can Search put a feature, well as as delete, combine and chapters in the Chapter List-Original Playlist menu. or Chapter move List- Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial Setup menu (see Auto Chapter on page 25). 1 2 the title Play At the (Original or Playlist). you want to start a new chapter, press CHP ADD. A chapter marker icon appears on the TV screen. ?Y point ou can also put chapter markers in while record- ing. Changing Move func- tions, the start and end frames may not be exactly set in the starting and ending points display. VR Markers Note : VR and Parts Adding Chapter VR Title Thumbnails +RW +R Each title displayed in the Title List menu is represented by a thumbnail picture taken from the start of that title or chapter. If you prefer, select a different still picture from within a title. 1 Play the title (Original or Playlist). Press THUMBNAIL to make the 2 played picture Original The still or the Playlist one currently dis- that appears in the menu. picture that you choose Original or Playlist menu. appears in both the Tip You change the thumbnail picture of the title on the Chapter List-Original or Chapter List-Playlist menu. Select a chapter on the Chapter List-Original or Chapter List-Playlist menu, then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is changed. can also 45 EDITNG Title and Making a Chapter Editing (Continued) New Playlist Use this function to add an VR Original title or chapter to the Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don't need later see Deleting a Title/Chapter on page 47). Adding Additional Title/Chapters VR Playlist You can add --- The title appears in the Playlist complete with the chapter markers that appeared on the Original. However, if even 1 you add more chapter markers to the Original later, these are not automatically copied over into the Playlist Choose Original an You add up to 999 chapters to one disc If you want to add a chapter of a title, use the Adding a can . title/chapter to the Choose Playlist or chapter Playlist, then press ENTER. Original menu options appear on the a to Playlist title put into left side of the screen. 2 options 'Playlist' from Original menu then press ENTER. this page. chapter on the Original menu to put into the Playlist, then press ENTER. Original (Title or Chapter) options appear on the left side of the Original menu. a title on only title to the Use v / V to select title. 1 if it is Original title or chapter already registered. an to the or Use v / V to select 2 options 'Playlist' from Original then press ENTER. 3 Choose a Title tered to insert List-Playlist that is already regisa title or chapter, then press ENTER. The title or chapter appears in the updated Playlist menu. 4 Repeat steps 1-3 to ter on the Playlist. 3 Select 'New The new chapters 46 then press ENTER. title appears in the updated Playlist. All of the title are added to the Playlist. Playlist' to the or chap- (O) to exit, or MENU/LIST Title List-Original menu. Press RETURN 5 back add additional title to go Title and Deleting VR a Chapter Editing (Continued) Title/Chapter +RW +R Deleting Video You If you erase a title or chapter from the Playlist menu on DVD-RW discs formatted in VR mode, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to delete a title or chapter from Title List or Chapter List menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist. 1 2 can a delete VR Part part which you do a not want in the title. Press MENU/LIST Title repeatedly to display List-Original or Title List-Playlist menu. Use vVbBto choose a title you want to delete then press ENTER. The options appears on the left side of the 3 Select 'Delete Part' from the 4 Press ENTER. options on menu. the menu. Note : It may not be possible to delete than 5 seconds long. 1 On the Title List bBto choose a chapters Chapter chapter or or that List menu, use vV title you want to delete then press ENTER. Options appears on the left side of the 2 Select 'Delete' from the less are options on screen. the menu. Title Edit (Delete Part) menu appears on the TV screen. 'Start Point' icon is Press ENTER to confirm. 3 The confirm message for 4 Use b / B to select 'Ok' then press ENTER. The selected chapter or title is deleted. After pressing ENTER, displayed. 5 6 Repeat steps 1 - deleting the new, will appear. updated menu Starts is 6 4 to continue to delete from the (O) repeatedly to exit the menu. When DVD+RW changed ? If more titles ? recording, name is are combined into repeatedly deleted, When you are deleting a title or chapter, only the last one on DVD+RW increases remaining recording time. to find the pause step, search and starting point. of the section starting point you want to delete. 'End Point' icon is highlighted. part is indicated on the Progress Bar. 7 8 Press ENTER at the ending point you want to delete. You can cancel the selected point, of the section v / V to use select 'Cancel' icon then press ENTER. the one. use Use pause step, search and slow-motion to find the ending point. to 'Deleted Title'. than two titles are the deleted title's and Press ENTER at the The menu. Press RETURN playback 5 slow-motion Notes : ? highlighted. 9 After you finish editing, select the 'Done' icon then press ENTER. The confirm message for 10 deleting will appear. Use b / B to select 'Ok' then press ENTER. The selected part is deleted from the title and Title List-Original or Title List-Playlist menu appears. 47 EDITNG Title and Naming You 1 VR Title a can name titles Video +RW Combining +R VR independently. On the Title List menu, use vVbBto choose the title you want to name then press ENTER. Options 2 Chapter Editing (Continued) on appears the left side of the menu. Use vVbBto select the 'Title Name' menu +RW Chapters +R Use this function to combine two Original chapters Into One into adjacent Playlist or one. Note : option This function is not available if there is only one chapter within the title. then press ENTER. Keyboard Two appears. 1 On the ter of Chapter List menu, select the first chapthe two chapters you want to combine then press ENTER. Chapter List options appear on the left side of the menu. 2 3 Enter a name Use vVbBto select 'Combine'. The combine indicator appears between the two chapters you want to combine. for the title. Use vVbBto select character then press ENTER to confirm your selection. Refer to step 5 as shown on page 27 a (Disc Label). 3 4 Choose OK then press ENTER to save the and return to the previous menu display. 5 Press RETURN (O) repeatedly name to exit the menu. Notes : ? ? ? Names be up to 32 characters long. For discs formatted on a different DVD Recorder, you will see only a limited character set. When can recording on discs, the entered player only 48 DVD-R, DVD+R name is displayed after finalization. or DVD+RW on the DVD Press ENTER to confirm. After pressing ENTER, played. the updated menu is dis- Title and Moving a Chapter Editing (Continued) VR Playlist Chapter Protect Use this function to re-arrange the playing order of the Playlist chapters on the Title List-Playlist menu. Note : This function is not available if there is 1 Select a chapter from the only one chapter. Chapter List-Playlist menu. Press ENTER. 2 Chapter List-Playlist options of the appear on the left side menu. Use vVbBto select 'Move' from 3 options a Title Use this function to editing 1 2 or deleting +RW +R protect against accidental recording, of the title. Press MENU/LIST to display Use vVbBto choose a the Title List title you want to pro- tect then press ENTER. Options appear on the left side of the 3 Select 'Protect' from the 4 Press ENTER to confirm. menu. screen. options. Playlist then press ENTER. The lock mark will appears on the title's thumbnail. Tip 4 Use vVbBto choose the you want to move the chapter to then press ENTER. After pressing ENTER, updated menu is displayed. place If you select a title that has already been protected on the Title List menu, you can 'unprotect' it by choosing "Protect" from the Title List menu options. After doing that, you can edit and delete the title. 49 EDITNG Title and Hide You a can Chapter Editing (Continued) +RW Chapter skip playing chapters +R without Dividing deleting from the Use this command to disc. 1 On the List menu, Chapter choose a chapter use vVbBto 1 2 split a menu options appears on the left side of the appear on the left side of the screen. 2 options. Select 'Divide' from the Title List 3 lighted. Title Edit Press ENTER to confirm. chapter's (Divide) thumbnail will dim. Current If you select a chapter that is already dim on the Chapter List menu, you can 'show' it by choosing "Show" from the Chapter List menu options. After are able to see menu menu option options. is high- appears and goes into STOP mode. Tip that, you titles. screen. Select 'Hide' from the The new title you want to a Press ENTER after the 'Divide' 3 +RW title up into two On the Title List menu, select divide then press ENTER. The you want to hide then press ENTER. Options One Title Into Two picture The first doing title's the title. thumbnail The second title's thumbnail 4 Use pause step, search and slow-motion to find the point you want to divide the title. 5 When the 'Divide' ENTER at that You option point. can remove the is highlighted, press dividing point and exit the Title Edit (Divide) menu, use v / V to select 'Cancel' option then press ENTER. The division point is removed. 6 Choose 'Done' the option dividing point. then press ENTER to fix The title is divided into two 4 minutes to divide. 50 new titles. It take up to Additional Information +RW Overwriting Recording To overwrite video a new recording previously on a recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. 1 2 Select input you want to record source REF NC (TV channel, AV1-2, DV). Press MENU/LIST to display the Title List menu. 3 To play back Most 3 4 over- regular DVD Press REC Overwrite The new to (x) updated menu is dis- Notes : If the overwrite is of the current longer title, the than title. protected the recording length a next title is overwritten. that the disc can be computer equipped with a To finalize a disc, refer You can displayed Recorders or Players DVD menu +R view the Title List player that is capable displayed on the other playing DVD+RW or menu of DVD+R discs. 1 2 Insert DVD+R or with the other play or not. player to play. suitable DVD-ROM drive. on for page 27. Notes : The edited contents of +RW mode, finalized to "Finalize" players. other DVD also Finalizing a Video mode disc creates a menu screen navigating the disc. The menu can be accessed by pressing MENU/LIST or TITLE. at the on can recordings and editings in place so played on a regular DVD player or Unfinalized DVD+RW is protected, the overwriting stops starting point of the title. Viewing or 'saves' the But if next title is Title List Disc) the played. This function is not available for came a finalized discs players check what formats of discs it will stop the overwrite recording. title is created and play can DVD+RWs. A small number of Finalizing Press STOP (PLAY). mode, finalized DVD+R Check the manual that title. 5 players DVD-RW discs recorded in VR write. (z) to start overwrite recording. recording starts from the start point of N Recordings on Players (Finalizing recorded in Video title you want to or want Your Other DVD a title, select the title you then press ENTER Playing Use vVbBto choose a a playable on regular DVD+RW disc is DVD compatible regular DVD players only after finalization. Any edited contents of the DVD+R disc are not compatible on regular DVD players. (Hide, chapter combine, added chapter mark, etc.) How long finalization takes depends on the type of on disc, how much is recorded number of titles on DVD+R DL disc can on the disc, and the the disc. take up to 30 minutes to finalize. DVD+RW disc recorded already. Press TITLE in Title List menu play or stop mode. will appear as shown below. Tip You can remove STOP the Title List menu by pressing (x). 51 Language Code and Area Code List Language Codes Use this list to your desired language for the Disc Audio, Disc Subtitle, Disc Menu. input Language Code Abkhazian following Code 6566 Language Fiji Afar 6565 Afrikaans initial settings: Code 7074 Language Lingala Code 7678 Language Singhalese Finnish 7073 Lithuanian 7684 Slovak 8375 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam Ameharic 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yo ruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 8373 8471 8479 Area Codes Choose an area Area code from this list. Code Code Area Code Area Code ET Malaysia MY Saudi Arabia SA AR Ethiopia Fiji FJ Maldives MV SN Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE Chile CL Hong Kong Hungary HU NG Switzerland CH China CN India IN Nigeria Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Portugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Afghanistan Argentina Czech Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg 52 Republic AF Area SG SK UG Controlling You Your TV with the source, and power switch of your LG TV with the supplied remote. can control the sound level, input Controlling You You can control your TV using Remote Supplied the buttons below. can other TVs with the remote control the sound source, and well. If your TV is listed level, input power switch of non-LG TVs as in the table below, set the appropriate manufacturer code. 1. While down TV POWER button, press the number buttons to select the manufacturer holding code for your TV 2. the table (see below). Release TV POWER button. Code numbers of controllable TVs TV Control Buttons If more them than one at one code number is listed, try entering time until you find the a one that works with your TV. You POWER Turn the TV AV Switch the TV's can on or off. input source between the TV and other input sources. VOL +/-- Scan up or down through memorized channels. Adjust Code Number LG / GoldStar 1 Zenith 1,3,4 Samsung 6,7 Sony 8,9 Hitachi 4 (Default), 2 Notes : By pressing PR +/-- Manufacturer the sound level of the TV. Depending on function the on your TV, TV, some or even after all buttons may not entering the correct manufacturer code. If you enter a new code number, the code number previously entered will be erased. After you replace the batteries in the remote, the code number you have set may be reset to the default setting. Re-enter the appropriate code number again. 53 REF NC Troubleshooting Check the following guide for the possible cause of a before problem contacting service. Solution Cause Symptom No power. The power cord is disconnected. Plug the power securely. No The TV is not set to receive DVD Select the Recorder on picture. signal output. cord into the wall outlet appropriate video input mode so the picture from the DVD the TV Recorder appears The video cable is not connected on the TV Connect the video cable screen. securely. securely. The connected TV power is turned off. Turn The Select the correct equipment connected with the audio cable(s) is not set to receive Recorder signal output. No sound. The audio cables are DVD not connected the TV. on Audio Receiver input mode the on you can listen to the sound from the DVD Recorder. so Connect the audio cable securely. securely. The playback picture is The power of the equipment connected with the audio cable is turned off. Turn The audio Replace connecting The disc is cord is damaged. the on equipment connected with the audio cable. it with new one. Clean the disc. dirty. poor. The DVD Recorder does not start No disc is inserted. Insert a disc. cator in the playback. An unplayable disc is inserted. Insert a placed upside down. indi- (Check the disc system, and regional code.) playable type, color The disc is (Check that the disc display window is lit.) disc. Place the disc with the side playback down. The disc is not placed within the guide. Place the disc inside the dirty. Clean the disc. The level is set. Cancel the the The picture from the external input is distort- The video ponent is signal from the copy-protected. external com- Some channels are when Those channels picture or sound of broadcasting channel is weak or missing. Aerial The The recorder's picture from the external input is not 54 are not stored in the Recorder. The shown. Rating function or change level. You cannot connect via this Recorder. Connect the component directly to your TV. ed skipped over usingv/V. rating tray correctly guide. The disc is Rating the disc on or Restore channels. See on cables are loose. source is incorrect. "Program Edit" pages 18-19. Tighten connections Use AV to select AV2, DV, etc.) or input replace channel cable. (AV1, Troubleshooting (Continued) The disc Can't play a disc recorded using this Recorder on Solution Cause Symptom Some another was recorded in Video mode. Finalize the disc. will not No solution. players play final- even a ized disc recorded in Video mode. player. The disc was recorded in VR The other mode, player must order to play it. ble in Cannot record not record or did Discs recorded with copy-once material cannot be played on other players. No solution. The Use another disc. remaining blank space on The source copy you are setting the channel is tuned When trying to record is on to recording is not the recording channel, a the TV's own Video mode programs that are copy-once cannot be recorded. cor- TV is not once programmed VR mode formatted disc for copymaterial. a page 20. on Reprogram Recording" light does programming timer. not on Set clock to correct time. See "Clock Set" appear after present. the Recorder's Use protected Timer record indicator is not Select the channel disc, incorrectly. Playback source. built-in TV tuner. rect time. Stereo Audio Record You cannot record the tuner. Clock in DVD Recorder is not set to Timer has been and/or compati- protected. When recording possible. the disc be RW is insufficient. successfully. Timer (page 27) Reprogram Stereo-compatible. No solution. Broadcast program is not in stereo for- No solution. Timer. See "Timer page 40. on Timer. mat. DVD Recorder A/V Out connected to TV A/V In jacks are jacks. Make A/V connections. Stereo is not available only via A/V output from DVD Recorder. DVD Recorder Audio/Video Out is not selected for viewing Select AUX or A/V TV source as input. at the TV. DVD Recorder's TV audio channel is set Set TV audio channel mode to Stereo. to See mono. "Changing TV audio channel" on page 39. The Remote Control The Remote Control is not does not work remote properly. sensor on pointed at the the DVD Recorder. Point the Remote Control at the remote sensor on The Remote Control is too far from the Operate the DVD Recorder. the Remote Control within 7 m. DVD Recorder. There is an obstacle in the path of the Remove the obstacle. Remote Control and the DVD Recorder. The batteries in the Remote Control are Replace the batteries with new ones. exhausted. Resetting the recorder If you observe any of the The unit is or plugged in, but the power will not turn The panel display is not working. recorder is not operating normally. can reset the recorder as follows: Press and hold the POWER button for at least five following symptoms... off. The front ...you on seconds. This will force the unit to power off then turn the unit back on. the power and then plug it in Unplug cord, wait at least five seconds, again. 55 REF NC Specifications General Power AC requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Television 110-240V, 50/60 Hz 27W 430 x 49 x 300 mm (w x h x d) 3.5Kg 5˚C to 35˚C 5 % to 90 % system PAL I, B/G, I/I, SECAM D/K, K1 colour system Recording format PAL Recording format DVD Video Recording Recordable discs Recording, DVD-VIDEO DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable, DVD+Recordable (Double Layer) DVD (4.7GB): Approx. 1 hour (HQ mode), 2 hours (SQ mode), 4 hours (LQ mode), 6 hours (EQ mode) DVD+R DL (8.5GB): Approx. 2 hour (HQ mode), 3 hours 40 minutes (SQ mode), 7 hours 50 minutes (LQ mode), 11 hours 30 minutes (EQ mode) Recordable time Video recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format 27MHz MPEG 2 48kHz Dolby Digital Playback Frequency DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to DVD(PCM96kHz):8Hzto44kHz More than 100 dB (AUDIO OUT connector) Less than 0.008% THD (AUDIO OUT connector) More than 95 dB (AUDIO OUT connector) response Signal-to-noise ratio Harmonic distortion Dynamic range 20 kHz Inputs ANTENNA IN Antenna input, 75 ohms VIDEO IN 1.0 AUDIO IN 0 ohms, sync negative, RCA jack x 2 dBm more than 47 kohms, RCA jack (L, R) x 2 DV IN 4 pin (IEEE Vp-p 75 1394 standard) Outputs VIDEO OUT Vp-p 75 Ω, sync negative, RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin (C)0.3V(p-p)75Ω (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 0.5 V (p-p), 75 Ω, RCA jack x 1 3 V (p-p), 75 Ω, Optical connector x 1 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 1 S-VIDEO OUT COMPONENT VIDEO OUT Audio output (digital audio) Audio output (optical audio) Audio output (analog audio) x 1 Accessories: Videocable.............................1 Audiocable(L,R)................1 RFCoaxialCable.........................1 Remotecontrol..................1 Batteries...............................2 Design and specifications are subject Manufactured under license from marks of Dolby DTS and DTS 56 to Dolby change without notice. Laboratories. "Dolby", "Pro Logic" and the double-D Laboratories. Digital Out are registered trademarks of Digital Theater Systems, Inc. symbol are trade- P/NO : 3834RD0064L
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project