Samsung HT-ES4200 Benutzerhandbuch

HT-E4200
HT-ES4200
2.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
HT-E4200_XU_0223.indd 1
2012-02-24 오전 2:12:04
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device
and shall stay readily operable at any time.
• This apparatus shall always be connected
to an AC outlet with a protective grounding
connection.
• To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily
operable.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
This symbol indicates important
instructions accompanying the product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be
used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must
be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug
is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should
obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative
to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket
as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains
socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN
= LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug,
proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or
coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the
letter L or coloured BROWN or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR
BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
| 2 English
HT-E4200_XU_0223.indd 2
2012-02-24 오전 2:13:00
Disc Storage & Management
01
Safety Information
• Holding Discs
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
- Avoid touching the surface of a disc where
data has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
- When cleaning, wipe gently from the inside to
the outside of the disc.
- Disc Storage
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
• If the product makes an abnormal noise or
produces a burning smell or smoke, turn off
the power switch immediately and disconnect
the power plug from the wall outlet. Then,
contact the nearest customer service centre for
technical assistance. Do not use the product.
Using the product as it is may cause a fire or an
electric shock.
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
 Do not keep in direct sunlight.
 Keep in a cool ventilated area.
 Keep in a clean protection jacket and store
vertically.
Handling Cautions
• Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases, on the apparatus.
• To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
• Do not plug multiple electric devices into the
same wall socket. Ovedrloading a socket can
cause it to overheat, resulting in a fire.
• Maintenance of the Cabinet
- Before connecting other components to this
product, be sure to turn them off.
Using the 3D Function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
• Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
• A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
• Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.)
English
HT-E4200_XU_0223.indd 3
3|
2012-02-24 오전 2:13:01
Safety Information
• Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
• If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
product’s HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
• The product outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46 inch screen, stay 3.5
meters from the screen.
- Place the 3D video screen at eye level for the
best 3D picture.
• When the product is connected to some 3D
devices, the 3D effect may not function properly.
• This product does not convert 2D content into
3D.
• “Blu-ray 3D” and “Blu-ray 3D” logo are
trademarks of the Blu-ray Disc Association.
Copyright
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
Licence
• Dolby and the double-D symbol are registered
trademarks of Dolby Laboratories.
• Manufactured under licence under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929;
7,212,872 & other U.S. and worldwide patents
issued & pending. DTS-HD, the Symbol, & DTSHD and the Symbol together are registered
trademarks & DTS-HD Master Audio | Essential
is a trademark of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
• ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup
menu. Go to vod.divx.com for more information
on how to complete your registration.
DivX Certified® to play DivX® video up to HD
1080p, including premium content.
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
Covered by one or more of the following U.S.
patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274
| 4 English
HT-E4200_XU_0223.indd 4
2012-02-24 오전 2:13:03
Safety Information
• Oracle and Java are registered trademarks of
Oracle and/or its affiliates. Other names may be
trademarks of their respective owners.
• Open Source Licence Notice
- In the case of using open source software,
Open Source Licences are available on the
product menu.
01
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
This product incorporates proprietary technology
under licence from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other
U.S. and worldwide patents issued and pending
as well as copyright and trade secret protection
for certain aspects of such technology. Cinavia
is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation. All
rights reserved by Verance. Reverse engineering
or disassembly is prohibited.
• This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
• Blu-ray Disc™, Blu-ray™, and the logos are
trademarks of Blu-ray Disc Association.
• iPad, iPhone, iPod, iPod classic, iPod nano,
iPod shuffle, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other
countries.
• This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-produced film and videos and
their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Centre at http://www.cinavia.com.
To request additional information about Cinavia
by mail, send a postcard with your mailing
address to: Cinavia Consumer Information
Centre, P.O. Box 86851, San Diego, CA, 92138,
USA.”
English
HT-E4200_XU_0223.indd 5
5|
2012-02-24 오전 2:13:06
Contents
SAFETY INFORMATION
2
3
3
3
4
4
Warning
Disc Storage & Management
Handling Cautions
Using the 3D Function
Copyright
Licence
SETTINGS
23
24
25
26
30
33
MEDIA PLAY
GETTING STARTED
7
8
11
12
12
13
Disk and Format Compatibility
Logos of Discs the product can play
Accessories
Front Panel
Rear Panel
Remote Control
CONNECTIONS
15
15
16
17
18
19
19
19
20
20
20
21
21
21
22
22
22
Connecting the Speakers
Speaker Components
Installing the Speakers
(HT-ES4200 Only)
Assembling the Front Speaker
(HT-ES4200 Only)
Connecting The Speakers
(HT-ES4200 Only)
Connecting the FM Antenna
Connecting to an iPod/iPhone
Attaching the Toroidal Ferrite Core to the
Power Cord of the Main Unit
Connecting to a TV
Method 1 Connecting to a TV
with an HDMI Cable - Best Quality
(Recommended)
Method 2 Connecting to a TV with a
Video Cable - Good Quality
Connecting to External Devices
Method 1 AUX IN : Connecting an
External Analogue Component
Method 2 OPTICAL : Connecting an
External Digital Audio Component
Connecting to a Network Router
Wired Network
Wireless Network
The Initial Settings Procedure
The Home Screen
Accessing the Settings Screen
Settings Menu Functions
Networks and the Internet
Upgrading Software
35
36
36
37
37
37
38
38
40
42
43
44
46
48
The AllShare Play Screen
Playing Files on a USB Storage Device or
iPod/iPhone
iPod/iPhone Models You Can Use with
This Product
The Function Screen
Playing Commercial Video Discs
Playing Commercial Audio Discs
Playing a Disc with User Recorded
Content
Using the AllShare Network Function
Controlling Video Playback
Controlling Music Playback
Playing Photo Contents
Using the Tools Menu when a File is
Highlighted
Listening to Radio
Using the Special Effects Remote Control
Buttons
NETWORK SERVICES
49
51
Using Smart Hub
BD-LIVE™
APPENDIX
52
57
60
Additional Information
Troubleshooting
Specifications
| 6 English
HT-E4200_XU_0223.indd 6
2012-02-24 오전 2:13:09
Getting Started
Disk and Format Compatibility
02
Disc types and contents your product can play
Disc Type
Blu-ray Disc
3D Blu-ray Disc
VIDEO
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
Details
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been
recorded and finalised, or a USB storage media containing DivX, MKV, MP4
contents.
MUSIC
CD-RW/-R, DVD-RW/-R, Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage
BD-RE/-R
media containing MP3 or WMA contents.
PHOTO
CD-RW/-R, DVD-RW/-R, Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB storage
BD-RE/-R
media containing JPEG contents.
Getting Started
Media
| NOTE |
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your product will not play content that has been recorded on a DVD-R at a bit rate that exceeds 10 Mbps.
Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.
Playback may not work for some types of discs, or when you use specific operations, such as angle change and aspect ratio
adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your product cannot play
• HD DVD
• DVD-ROM/PD/MVDisc, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW(VR mode)
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
• 3.9 GB DVD-R Disc
for Authoring.
| NOTE |
This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow specific or
limited operation and provide only certain features during playback.
Please note that this is not a defect in the product.
Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because disc
formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software and/or the
manufacture of discs.
Please contact the SAMSUNG Customer Care Centre, if you have questions or encounter difficulty when playing Blu-ray Disc,
DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on playback restrictions.
Some commercial discs and DVD discs purchased outside your region may not play on this product.
English
HT-E4200_XU_0223.indd 7
7|
2012-02-24 오전 2:13:12
Getting Started
Region Code
Logos of Discs the product can play
Both products and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this product is displayed
on the rear panel of the product.
Disc Type
Blu-ray Disc
DVD-VIDEO
Region
Code
Area
A
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
B
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
C
India, China, Russia, Central and
South Asia.
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
| NOTE |
If the Region number of a Blu-ray Disc/DVDs does not
correspond to the Region number of this product, the
product cannot play the disc.
Blu-ray Disc
3D Blu-ray Disc
BD-LIVE
Dolby
DTS
DivX
PAL broadcast system in
U.K, France, Germany, etc.
Java
Supported Formats
Music File Support
File
Extension
Container
Audio
Codec
Support Range
*.mp3
MP3
MP3
-
WMA
Compliant with
WMA version 10
* Sampling rates (in
kHz) - 8, 11, 16,
22, 32, 44.1, 48
* Bit rates - All bit
rates in the range
5kbps to 384kbps
*.wma
WMA
| 8 English
HT-E4200_XU_0223.indd 8
2012-02-24 오전 2:13:17
Video File Support
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
WMV (wmv9)
*.mp4
MP4
*.3gp
3GPP
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
DivX 3.11/4.x
/5.1/6.0
1920x1080
6 ~ 30
8
MP3
AC3
LPCM
DTS Core
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
DivX 3.11/4.x
/5.1/6.0
1920x1080
6 ~ 30
8
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
DivX 3.11/4.x
/5.1/6.0
1920x1080
6 ~ 30
8
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
Window Media
Video v9
1920x1080
6 ~ 30
25
WMA
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
MP3
AAC
H.264 BP/MP/HP
1920x1080
6 ~ 30
25
MPEG4 SP/ASP
1920x1080
6 ~ 30
8
MP3
AC3
LPCM
DTS Core
MP3
AC3
LPCM
WMA
AAC
VRO
VOB
MPEG2
1920x1080
24/25/30
25
MPEG1
1920x1080
24/25/30
25
MPEG1
1920x1080
24/25/30
25
PS
MPEG2
1920x1080
24/25/30
25
TS
Audio Codec
Getting Started
Container
02
File Extension
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24/25/30
25
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
AC3
MPEG
LPCM
AC3
MPEG
LPCM
AAC
AC3
AAC
MP3
DD+
 Limitations
- Even when a file is encoded by a supported codec listed above, the file might not be played if its
content has a problem.
- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is
corrupted.
- Files having higher bit or frame rates than standard may stutter when played back.
English
HT-E4200_XU_0223.indd 9
9|
2012-02-24 오전 2:13:24
Getting Started
- The Seek (skip) function is not available if the
file’s index table is damaged.
- When you playback a file remotely through a
network connection, video playback may stutter
depending on the network speed.
 Video decoder
- Supports up to H.264 Level 4.1
- Does not support H.264 FMO/ASO/RS, VC1
SP/MP/AP L4 and AVCHD
- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
- Does not support GMC 2 or higher
 Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA 9 PRO multi-channel
files if the number of channels is more than 2 or
the files require lossless audio decoding.
- Does not support WMA sampling rate of
22050Hz mono
Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
• This product cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
• Your product only supports video that is under
30fps (frame rate).
• Your product only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this product.
• If some USB devices require excessive power,
they may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a
wall socket. If the problem continues, contact
the USB HDD manufacturer.
• You must remove the USB storage device safely
(by performing the “Safely Remove USB”
function) to prevent possible damage to the
USB memory.
Press the HOME button to move to the home
menu, press the YELLOW (C) button, and then
press the E button.
• SAMSUNG is not responsible for any data file
damage or data loss.
Notes on the USB connection
• Your product supports USB storage media,
MP3 players, digital cameras, and USB card
readers.
• The product does not support folder or file
names longer than 128 characters.
• Some USB/digital camera devices may not be
compatible with the product.
• Your product supports the FAT 16, FAT 32, and
NTFS files systems.
• Connect USB devices directly to the product’s
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
• The product does not support the PTP protocol.
• Do not disconnect a USB device during a
“loading” process.
• The bigger the image resolution, the longer the
image takes to display.
AVCHD
(Advanced Video Codec High Definition)
• This product can play back AVCHD format
discs. These discs are normally recorded and
used in camcorders.
• The AVCHD format is a high definition digital
video camera format.
• The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the “x.v.Colour” format.
This product can play back AVCHD discs that
use “x.v.Colour” format.
• “x.v.Colour” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
| 10 English
HT-E4200_XU_0223.indd 10
2012-02-24 오전 2:13:26
| NOTE |
Some AVCHD format discs may not play, depending on the recording conditions.
02
AVCHD format discs need to be finalised.
Getting Started
“x.v.Colour” offers a wider colour range than normal DVD camcorder discs.
Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
Accessories
Check for the supplied accessories below.
FUNCTION
TV
SOURCE
RECEIVER
SLEEP
BD
TV
RDS DISPLAY
TA
1
2
3
PTY-
PTY SEARCH
PTY+
4
5
7
8
6
9
DISC MENU
TITLE MENU
0
POPUP
MUTE
Video Cable
User Manual
VOL
S/W LEVEL
FULL SCREEN
TUNING
/ CH
HOME
REPEAT
TOOLS
INFO
EXIT
RETURN
TUNER
MEMORY
A
SMART
B
C
MO/ST
D
SEARCH 'ĺ' 3D SOUND
HUB
vTuner
AUDIO
SUBTITLE
SOUND
EFFECT
(For Power cord)
FM Antenna


Toroidal Ferrite Core
Remote Control/Batteries(AAA size)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual
product appearance.
An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product (i.e. where you have
failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to
read this user manual).

The amount of such administration charge will be advised to you before any work or home visit is carried
out.
English
HT-E4200_XU_0223.indd 11
11 |
2012-02-24 오전 2:13:28
Getting Started
Front Panel
PLAY/PAUSE
ENTER
STOP
OPEN/CLOSE
VOLUME CONTROL
FUNCTION
DISPLAY
DISC TRAY
USB HOST
POWER
REMOTE CONTROL
SENSOR
| NOTE |
To upgrade the product's software through the USB Host jack, you must use a USB memory stick.
When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the product or
the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the E button.
Rear Panel
AUX
IN
FRONT L
IMPEDANCE : 3Ÿ
SPEAKERS OUT
COOLING FAN
LAN
SUBWOOFER
FRONT R
VIDEO
OUT
L
FM ANT
R
5V 350mA
WIRELESS LAN
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
VIDEO OUT
AUX IN
FM ANTENNA
LAN TERMINAL
AUX
IN
FRONT L
IMPEDANCE : 3Ÿ
SPEAKERS OUT
LAN
L
FM ANT
R
SUBWOOFER
FRONT R
SPEAKER OUTPUT
CONNECTORS
VIDEO
OUT
5V 350mA
WIRELESS LAN
WIRELESS LAN
HDMI OUT
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
| NOTE |
Ensure a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not obstruct
the cooling fan or ventilation holes.
| 12 English
HT-E4200_XU_0223.indd 12
2012-02-24 오전 2:13:34
Remote Control
02
Tour of the Remote Control
FUNCTION
TV
SOURCE
To change to TV mode, press the
TV button.
To open and close the disc tray.
RECEIVER
To change to Home Cinema,
press the BD button.
Press numeric buttons to operate
options.
SLEEP
BD
TV
RDS DISPLAY
TA
1
2
3
PTY-
PTY SEARCH
PTY+
4
5
6
7
8
TITLE MENU
Press to view the disc menu.
0
POPUP
Press to stop/play a disc.
MUTE
VOL
S/W LEVEL
TUNING
/ CH
Press to move to the Home screen.
FULL SCREEN
HOME
REPEAT
Press this to see the full screen
on a TV.
TOOLS
Use to display the playback
information when playing
a Blu-ray/DVD disc.
EXIT
RETURN
A
SMART
B
vTuner
MO/ST
C
D
SEARCH 'ĺ' 3D SOUND
AUDIO
SUBTITLE
SOUND
EFFECT
Press this to use the vTuner.
Press to search contents.
Selects the disc Audio language.
Press to exit the menu.
Use to set a preset radio frequency.
TUNER
MEMORY
HUB
Press to use Smart Hub.
Search for active FM stations and
to change channels.
Use to adjust the level of the
subwoofer.
Allows you to repeat a title,
chapter, track or disc.
INFO
Select on-screen menu items and
change menu value.
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
Use to enter the Popup menu/
Title menu.
Press to pause a disc.
Cut off the sound temporarily.
Return to the previous menu.
Use the RDS function to receive
FM stations.
Press to search backwards or
forwards.
Press to skip backwards or forwards.
Press to use the Tools menu.
Set a Sleep time to shut off the
product.
9
DISC MENU
Adjust the volume.
Press to select Blu-ray's mode
(AUX, BD/DVD, etc.).
or
Press to select TV's video mode.
Select MONO or STEREO for radio
broadcasts.
Press to apply 3D sound effect.
Press to apply sound effects.
Press to enjoy an ordinary 2D video
in 3D mode.
Selects the disc subtitle language.
English
HT-E4200_XU_0223.indd 13
Getting Started
Turn the product on and off.
13 |
2012-02-24 오전 2:13:37
Getting Started
Installing batteries in the Remote
Control
Battery size: AAA
1
2
| NOTE |
Make sure to match the “+” and “–” ends of the batteries
with the diagram inside the compartment.
Assuming typical TV usage, the batteries last for about
one year.
The remote control can be used up to approximately
7 meters from the product in a straight line.
Setting the Remote Control
You can control certain functions of your TV with
this remote control.
When operating a TV with the remote control
1 . Press the TV button to set the remote control
to TV mode.
2 . Turn on your TV.
3 . While holding down the POWER button,
enter the code corresponding to your brand
of TV.
• If there is more than one code listed for
your TV in the table, enter one at a time to
determine which code works.
• Example : For a Samsung TV
While holding down the POWER button,
use the number buttons to enter 00. If that
does not work, try 15, then 16, etc.
4 . If the TV turns off, the setting is complete.
• You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
| NOTE |
The remote control may not work on some brands of TV's.
Also, some operations may not be possible, depending on
your brand of TV.
TV Control Codes
Brand
Code
Brand
Code
Admiral
(M.Wards)
A Mark
56, 57, 58
Mitsubishi/MGA
MTC
NEC
Nikei
Onking
Onwa
18, 40, 59, 60, 75
18
18, 19, 20, 40, 59, 60
03
03
03
06, 07, 08, 09, 54, 66,
67, 73, 74
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48, 54,
62, 72
63, 66, 80, 91
15, 18, 59
40
06, 66, 67
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78,
92, 93, 94
03, 19
40
Anam
AOC
Bell & Howell
(M.Wards)
Brocsonic
Candle
Cetronic
Citizen
Cinema
Classic
Concerto
Contec
Coronado
Craig
Croslex
Crown
Curtis Mates
CXC
01, 15
01, 02, 03, 04, 05, 06,
07, 08, 09, 10, 11, 12,
13, 14
01, 18, 40, 48
57, 58, 81
59, 60
18
03
03, 18, 25
97
03
18
46
15
03, 05, 61, 82, 83, 84
62
03
59, 61, 63
03
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
Daewoo
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
Daytron
40
Dynasty
03
03, 15, 40, 46, 59, 61,
Emerson
64, 82, 83, 84, 85
Fisher
19, 65
Funai
03
Futuretech
03
General Electric
06, 40, 56, 59, 66,
(GE)
67, 68
Hall Mark
40
Hitachi
15, 18, 50, 59, 69
Inkel
45
JC Penny
56, 59, 67, 86
JVC
70
KTV
59, 61, 87, 88
KEC
03, 15, 40
KMC
15
15, 16, 17, 37, 38,
LG (Goldstar) 01,
39, 40, 41, 42, 43, 44
Luxman
18
19, 54, 56, 59, 60, 62,
LXI (Sears)
63, 65, 71
15, 17, 18, 48, 54, 59,
Magnavox
60, 62, 72, 89
Marantz
40, 54
Matsui
54
MGA
18, 40
Panasonic
Penney
Philco
Philips
Pioneer
Portland
Proton
Quasar
Radio Shack
RCA/Proscan
Realistic
Sampo
Samsung
00, 15, 16, 17, 40, 43,
46, 47, 48, 49,
59, 60, 98
Sanyo
Scott
Sears
Sharp
Signature 2000
(M.Wards)
19, 61, 65
03, 40, 60, 61
15, 18, 19
15, 57, 64
Sony
50, 51, 52, 53, 55
Soundesign
Spectricon
03, 40
01
57, 58
SSS
18
Sylvania
18, 40, 48, 54, 59,
60, 62
Symphonic
Tatung
Techwood
Teknika
TMK
Toshiba
Vidtech
Videch
61, 95, 96
06
18
03, 15, 18, 25
18, 40
19, 57, 63, 71
18
59, 60, 69
Wards
15, 17, 18, 40, 48, 54,
60, 64
Yamaha
18
York
40
Yupiteru
03
Zenith
58, 79
Zonda
01
Dongyang
03, 54
The remote control will work with Samsung TVs by
default.
| 14 English
HT-E4200_XU_0223.indd 14
2012-02-24 오전 2:13:42
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
03
Connecting the Speakers
Place it on a stand or cabinet shelf, or
under the TV stand.
Subwoofer
Connections
Position of the product
Selecting the Listening Position
Front (R)
The listening position should be
located about 2.5 to 3 times the
distance of the TV's screen size
away from the TV. For example, if
you have a 46 inch screen, locate
the listening position 2.92 to 3.50
meters from the screen.
Product
Front (L)
Front Speakers
Place these speakers in front of your listening position, facing inwards (about 45°)
toward you. Place the front speakers so that their tweeters will be at the same
height as your ear.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
Speaker Components
HT-E4200
HT-ES4200
(L)
(R)
SPEAKER CABLE
(L)
(R)
FRONT
FRONT
PARTITION
STAND BASE
SCREW (2EA)
SUBWOOFER
SUBWOOFER
English
HT-E4200_XU_0224.indd 15
15 |
2012-02-24 오전 11:20:04
Connections
Installing the Speakers (HT-ES4200 Only)
You can install to use 4 types that described on
the right side.
1
Type 1. You can assemble the speakers as a bar
form and use the hole on the rear of the
speaker to hang it up on the wall.
Type 2. You can assemble the speakers as a bar
form and put it on the table to use.
2
Type 3. You can assemble the speakers as a
stand form and put it on the table or floor
to use.
3
Type 4. You can assemble the speakers as a
stand form and use the hole on the rear
of the speaker to hang it up on the wall.
4
| NOTE |
However, if you install the speakers on the wall, installation
service or accessories (screws or nails) are not provided from
the company.
| 16 English
HT-E4200_XU_0223.indd 16
2012-02-24 오전 2:14:00
Assembling the Front Speaker (HT-ES4200 Only)
03
You can install the product in one of the following two ways:
Choose a desired one according to the installation area and your decoration plan.
Connections
Installing on the Partition
The front speakers can be combined by a partition.
1. Connect the left/right speakers to the
Partition.
1
Partition
2. Insert screws into the hole on the rear of each
speakers, and then use screwdriver to tighten
screws clockwise.
2
3. This is the appearance after the speaker is
installed.
3
Installing on the Table Stand
1. Connect the Speaker to the Stand Base.
2. Insert a screw into the hole on the rear of the
speaker, and then use screwdriver to tighten
a screw clockwise.
1
2
Speaker
Stand
Base
3. This is the appearance after the speaker is
installed. Follow this steps to install other
speaker.
3
English
HT-E4200_XU_0223.indd 17
17 |
2012-02-24 오전 2:14:09
Connections
Connecting The Speakers (HT-ES4200 Only)
1. Match the front speaker cable bundle to the correct speaker by matching
the colour coded plug on each bundle to the coloured sticker on the
bottom of the front speaker.
2. To attach speaker wire to the front speaker:
a. Press down the red tab on the back of the front speaker, insert the red
wire, and then release the tab.
Black
Red
b. Press down the black tab on the back of the front speaker, insert the
black wire, and then release the tab.
3. Connect the speaker wire plugs to the back of the product by matching
the colours of the front speaker plugs to the colours of the front speaker jacks.
In case of HT-E4200
FRONT L
SUBWOOFER
IMPEDANCE : 3Ÿ
SPEAKERS OUT
Front Speaker (L)
FRONT R
Subwoofer
FRONT L
SUBWOOFER
FRONT R
IMPEDANCE : 3Ÿ
SPEAKERS OUT
LAN
5V 350mA
WIRELESS LAN
HDMI
Front Speaker (R)
Refer to page 15 for the speakers of HT-ES4200.
| CAUTION |
If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install.
However, when you install it, accessories (nails or screws) and installation is not provided by the company.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole)
of the subwoofer speaker.
Do not hang the subwoofer on the wall through the duct (hole).
| NOTE |
If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.
| 18 English
HT-E4200_XU_0223.indd 18
2012-02-24 오전 2:14:18
Connecting the FM Antenna
03
FM Antenna (supplied)
LAN
IMPEDANCE : 3Ÿ
FRONT L
FRONT R
VIDEO
OUT
L
FM ANT
R
SUBWOOFER
Connections
AUX
IN
SPEAKERS OUT
5V 350mA
WIRELESS LAN
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
1 . Connect the FM antenna supplied to the FM ANTENNA Jack.
2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
| NOTE |
This product does not receive AM broadcasts.
Connecting to an iPod/iPhone
Connect an iPod/iPhone using the USB cable to the front USB port.
5V 500mA
Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit
SPEAKERS OUT
FRONT L
SUBWOOFER
1. Pull the fixing tab of the Toroidal ferrite core to open
it.
2. Make a loop twice in the main unit power cord.
3. Attach the Toroidal ferrite core to the main unit power
cord as the figure shows and press it until it clicks.
FRONT R
IMPEDANCE : 3Ÿ
If you attach a Toroidal ferrite core to the power cord of
the main unit, it will help to prevent RF interference from
radio signals.
LAN
5V 350mA
WIRELESS LAN
English
HT-E4200_XU_0223.indd 19
19 |
2012-02-24 오전 2:14:21
Connections
Connecting to a TV
Select either Method 1 or Method 2.
• If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control,
and then select the correct external source from the TV's source list (HDMI, Video In, etc.) to view video from the home
cinema.
AUX
IN
VIDEO
OUT
L
AUX
IN
FRONT L
IMPEDANCE : 3Ÿ
SPEAKERS OUT
LAN
FRONT R
VIDEO
OUT
FM ANT
L
FM ANT
R
SUBWOOFER
5V 350mA
WIRELESS LAN
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
R
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
(Cable not supplied.)
Method 1
Method 2
HDMI IN
VIDEO IN
Method 1 Connecting to a TV with an HDMI Cable - Best Quality (Recommended)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
If the TV supports ARC, you can hear TV sound from home cinema with only connect this cable.
Method 2 Connecting to a TV with a Video Cable - Good Quality
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN
jack on your TV.
| NOTE |
The VIDEO Out jack always outputs in the 576i/480i resolution regardless of the resolution set in the Setup menu.
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and
the picture will be distorted on the television.
| 20 English
HT-E4200_XU_0223.indd 20
2012-02-24 오전 2:14:24
Connecting to External Devices
VIDEO
OUT
AUX
IN
FRONT L
IMPEDANCE : 3Ÿ
SPEAKERS OUT
LAN
FRONT R
VIDEO
OUT
FM ANT
L
FM ANT
R
SUBWOOFER
Connections
AUX
IN
L
03
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,
the mode changes in this order : BD/DVD D. IN AUX R. IPOD FM
5V 350mA
WIRELESS LAN
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
R
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
(Cable not supplied.)
(Cable not supplied.)
Method 1
R
Red
W
White
Method 2
External Devices
AUDIO OUT
OPTICAL OUT
Method 1 AUX IN : Connecting an External Analogue Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analogue component.  Select the AUX mode.
• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
| NOTE |
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
English
HT-E4200_XU_0223.indd 21
21 |
2012-02-24 오전 2:14:27
Connections
Wireless Network
You can connect your product to your network
router using one of the methods illustrated below.
AUX
IN
SPEAKERS OUT
FRONT L
IMPEDANCE : 3Ÿ
Connecting to a Network Router
LAN
FRONT R
VIDEO
OUT
L
FM ANT
R
SUBWOOFER
5V 350mA
WIRELESS LAN
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
Wired Network
5V 350mA
WIRELESS LAN
AUX
IN
FRONT L
IMPEDANCE : 3Ÿ
SPEAKERS OUT
LAN
FRONT R
VIDEO
OUT
L
FM ANT
R
SUBWOOFER
5V 350mA
WIRELESS LAN
HDMI OUT
OPTICAL
DIGITAL
AUDIO IN
Broadband modem
(with integrated router)
Wireless IP sharer
Broadband
service
Or
Broadband
service
Router
| NOTE |
Broadband
service
Broadband
modem
| NOTE |
Internet access to Samsung’s Software Update server
may not be allowed, depending on the router you use or
your ISP’s policy. For more information, contact your ISP
(Internet Service Provider).
DSL users, please use a router to make a network
connection.
To use the AllShare Play function, you must connect your
PC to your network as shown in the illustrations on the
left.
The connection can be wired or wireless.
This product is compatible with only Samsung's Wireless
LAN Adapter. (not supplied) (Model name: WIS09ABGN).
- The Samsung Wireless LAN Adapter is sold separately.
Contact a Samsung Electronics retailer for purchasing.
You must use a wireless IP sharer that supports IEEE
802.11 a/b/g/n. (n is recommended for stable operation
of the wireless network.)
Wireless LAN, by its nature, may cause interference,
depending on the use condition (router performance,
distance, obstacles, interference by other radio devices,
etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc
mode is not supported.
The home cinema supports the following security
protocols only:
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, AES
For the AllShare Play function, a PC must be connected in
the network as shown in the figure.
| 22 English
HT-E4200_XU_0223.indd 22
2012-02-24 오전 2:14:30
Settings
The Initial Settings Procedure
<Incase of Network Cable connected>
04
• The Home menu will not appear if you do not configure
the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the menu
you selected.
Initial Settings > Network Settings (1/5)
Settings
Network cable connected.
Press Next to configure your wired network settings.
Previous
Next
Skip
If you want to connect to your wireless network, plug in
a Samsung Wireless LAN Adapter.
1 . Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Initial Settings
Language screen.
Initial Settings > On-Screen Language
Select a language for the on-screen
displays.
▲
Dansk
Nederlands
English
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
Hausa
Select English as the
on-screen menu
language.
Next
6 . If the connection is successful, the
Connection Complete screen appears. Select
Next, and then press the E button. The
Software Update screen appears.
| NOTE |
Magyar
Asusu Igbo
5 . Press the E button to set up the product's
wired network connecton or select Skip, and
then press the E button to skip network
setup. If you selected Skip, go to Step 9.
Italiano
▼
2 . Use the ▲▼◄► buttons on the remote
to select the desired language, and then
press the E button twice. The Start screen
appears.
3 · Press the E button to start setup. The
Network Settings screen appears.
If the connection is not successful, select Next, and then
press the E button. After you have completed the Initial
Settings procedure, go to "Wired Network" on page 30 to
set up the product's wired network connection.
7 . To upgrade the software, select Update
now, and then press the E button. To skip
the upgrade, select Update later, press the
E button, and go to Step 9.
| NOTE |
If you skipped network set up, you must skip Software
Update also.
Initial Settings > Network Settings (1/5)
No network cable or Samsung Wireless LAN Adapter
connected.
Please plug in a network cable or a Samsung Wireless
LAN Adapter.
Previous
Next
Skip
4 · Connect the network cable or insert the
Samsung Wireless LAN Adapter.
8 . If there is a Software Update available,
the product downloads and installs the
upgrade. This can take some time. If there
is no Software Update available, the "There
are no new software updates for you to
download. You already have the most up
to date version." message appears. And
then press the E button. The TV Aspect
Ratio screen appears.
English
HT-E4200_XU_0223.indd 23
23 |
2012-02-24 오전 2:14:36
Settings
| NOTE |
Initial Settings > TV Aspect Ratio
If you want to display the Initial Setting screen again and
make changes, select the Reset option. (See page 29)
Set to match the type of television connected.
16:9 Original
16:9 Full
Previous
Select when connecting to a
16:9 TV Screen. All content
will be displayed at original
aspect ratio. Content
formatted in 4:3 will be
displayed with black bars on
left and right.
4:3 Letter Box
4:3 Pan-Scan
Next
If you use an HDMI cable to connect the product to an
Anynet+ (HDMI-CEC)-compliant Samsung TV and 1.) You
have set the Anynet+ (HDMI-CEC) feature to ON in both
the TV and the product and 2.) You have set the TV to a
language supported by the product, the product will select
that language as the preferred language automatically.
9 · Using the ▲▼ buttons, select the aspect ratio
that matches your screen, and then press the
E button. Select Next, and then press the
E button.
The Home Screen
AllShare Play
You have four choices:
Play videos or music, or view photos from discs or connected devices.
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their original 16:9
format and 4:3 pictures (the old, standard
format) in 4:3 pillar box format with black bars
on the left and right.
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their original 16:9
format and expands 4:3 pictures to fill the
16:9 screen.
4:3 Letter Box - For older, standard screen
analogue TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in letter box format
that retains the 16:9 aspect ratio but puts
black bars above and below the picture.
4:3 Pan-Scan - For older, standard screen
analogue TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in Pan-Scan format
that fills the screen, but cuts off the left and
right sides of the picture and enlarges the
middle vertically.
2
3
4
1
Smart Hub
Function
Settings
d WPS(PBC)
5
1
Smart Hub. Starts Smart Hub. From Smart Hub,
you can access YouTube, games, and other apps.
2
AllShare Play. Play videos, photos or music content
from Disc, USB, PC or mobile devices.
3
Function. Select the audio/video input source.
4
Settings. Set various functions to suit your personal
preferences.
5
Displays the coloured buttons on your remote that
you can press to access or perform functions.
 Selecting an Option on the Home Screen
Initial Settings > Complete
Setup completed.
On-Screen Language

Network Settings

Software Update
-
TV Aspect

Press Smart Hub to
enjoy a variety of
Internet content.
OK
1 . To select an option on the Home screen,
move the cursor using the ◄► buttons until it
highlights the option of your choice, and then
press the E button.
Smart Hub
10 . The Setup completed screen appears. Check
the settings to confirm they are correct.
Select OK, and then press the E button.
The Home screen appears.
| 24 English
HT-E4200_XU_0223.indd 24
2012-02-24 오전 2:14:42
Accessing the Settings Screen
TV Aspect Ratio
16:9 Original
Smart Hub Screen Size
Audio
BD Wise
Network
System
Support
4
EXIT Button : Press to exit the current menu.
Settings
3D Settings
Display
3
04
1 . Select Settings on the Home screen, and
then press E. The Settings screen appears.
E (Enter) / DIRECTION Button :
~ Press ▲▼◄► to move the cursor or select
an item.
~ Press the E button to activate the currently
selected item or confirm a setting.
Size 3
Off
Resolution
Auto
Movie Frame (24Fs)
Auto
HDMI Colour Format
Auto
HDMI Deep Colour
Auto
Progressive Mode
Auto
| NOTE |
The E button on the product's front panel can be
used for same purpose as the E button on the remote
control.
Detailed Function Information
2 . To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
| NOTE |
If you leave the product in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the product is left in the screen saver mode for
more than 20 minutes, the power will automatically turn
off.
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◄► buttons to select the
function, menu item, or option.
The explanation will usually appear on the right of
the screen. A short description of each Settings
function starts on the next page. Additional
information on some of the functions is also in the
Appendix of this manual.
Buttons on the Remote Control Used
for the Settings Menu
VOL
S/W LEVEL
FULL SCREEN
TUNING
/ CH
HOME
REPEAT
1
TOOLS
INFO
RETURN
EXIT
3
2
A
B
TUNER
MEMORY
MO/ST
C
D
4
1
HOME Button : Press to move to the Home screen.
2
RETURN Button : Return to the previous menu.
English
HT-E4200_XU_0223.indd 25
25 |
2012-02-24 오전 2:14:49
Settings
Settings Menu Functions
Display
3D Settings
Set up the 3D related functions.
 3D Blu-ray Playback Mode: Select whether to play a Bluray Disc with 3D contents in 3D Mode. If you move to the
Home or Smart Hub Home menu while in 3D mode, the
product will switch to 2D automatically.
 Screen Size: Enter the size of the TV attached to the
product. The product will automatically adjust the 3D output
to the screen size of the TV.
TV Aspect
Ratio
Lets you adjust the output of the product to the screen size of
your TV. See page 24, Step 9 for a description of the screen
size options.
Smart Hub
Screen Size
Lets you select the optimal size for the Smart Hub Screen.
BD Wise
BD Wise is Samsung’s latest inter-connectivity feature.
When you connect a Samsung product and a Samsung TV
with BD Wise to each other via HDMI, and BD Wise is on in
both the product and TV, the product outputs video at the
video resolution and frame rate of the Blu-ray/DVD Disc.
Resolution
Lets you set the output resolution of the HDMI video signal
to Auto, 1080p, 1080i, 720p, 576p/480p. If Composite
is connected, the resolution supports only 576i/480i. The
number indicates the number of lines of video per frame. The
i and p indicate interlaced and progressive scan, respectively.
The more lines, the higher quality.
Movie Frame
(24Fs)
Setting the Movie Frame (24Fs) feature to Auto lets the product
adjust its HDMI output to 24 frames per second automatically
for improved picture quality if attached to a 24Fs compatible
TV.
• You can enjoy the Movie Frame (24Fs) feature only on a TV
supporting this frame rate.
• Movie Frame is only available when the product is in the
HDMI 1080i or 1080p output resolution modes.
HDMI Colour
Format
Lets you set the colour space format for the HDMI output to
match the capabilities of the connected device (TV, monitor,
etc).
HDMI Deep
Colour
Lets you set the product to output video from the HDMI OUT
jack with Deep Colour. Deep Colour provides more accurate
colour reproduction with greater colour depth.
Progressive
Mode
Lets you improve picture quality when viewing DVDs.
| 26 English
HT-E4200_XU_0223.indd 26
2012-02-24 오전 2:15:00
Audio
You can set the speaker options.
Equaliser
Let you configure the Equaliser settings manually.
04
Speaker
Settings
Lets you set the product so that the volume remains stable
when a scene change occurs or when you change the
channel.
Speaker
Selection
Lets you select which speakers you want active, either the
TV's speakers or the Home theater's speakers.
Audio Return
Channel
Lets you direct the sound from the TV to the Home Cinema
speakers. Requires an HDMI connection and an Audio Return
Channel (ARC) compatible TV.
• When Audio Return Channel set to on, use HDMI Cable to
connect the product to the TV. At this time, optical input
does not work.
• When Audio Return Channel set to auto, use HDMI Cable to
connect the product to the TV. At this time, ARC and optical
input is selected automatically.
Digital Output
Let you set the Digital Output to match the capabilities of the
AV receiver you’ve connected to the product. For more details,
please refer to the digital output selection table. (See page 56)
Dynamic
Range Control
Lets you apply dynamic range control to Dolby Digital, Dolby
Digital Plus, and Dolby True HD audio.
 Auto: Automatically controls the dynamic range of Dolby
TrueHD audio, based on information in the Dolby TrueHD
soundtrack. Also turns dynamic range control on for Dolby
Digital and Dolby Digital Plus.
 Off: Leaves the dynamic range uncompressed, letting you
hear the original sound.
 On: Turns dynamic range control on for all three Dolby
formats. Quieter sounds are made louder and the volume of
loud sounds is reduced.
Audio Sync
When the product is attached to a digital TV, lets you adjust
the audio delay so that the audio syncs with the video. You
can set the delay between 0 and 300 milliseconds.
Network
Settings
For more information about Network Settings and network
functions, see "Networks and the Internet" starting on page
30.
Network
Status
Let you check whether a connection to the network and the
Internet have been established.
English
HT-E4200_XU_0223.indd 27
Settings
Network
Smart Volume
27 |
2012-02-24 오전 2:15:01
Settings
System
AllShare
Settings
Lets you permit external devices such as smart phones to
connect to the product and share content with or control the
product.
BD-Live
Settings
Lets you allow, limit, or prohibit an Internet connection for the
BD-Live service.
Initial Settings
Lets you re-run the Initial Settings procedure. See page 23 for
details.
You can connect a wireless USB keyboard or mouse to
the USB port on the front of the product.
 Keyboard Settings: Lets you configure a wireless USB
keyboard connected to the product.
| NOTE |
You can use the keyboard only when a QWERTY keyboard screen or
window appears in the Web Browser.
 Mouse Settings: Lets you configure a wireless USB mouse
connected to the product. You can use the mouse in the
product's menu in the same way you use a mouse on your
PC.
Device
Manager
 To use a mouse with the product's menu:
1 . Connect the USB mouse to the product.
2 . Click the primary button you selected in Mouse Settings.
The Simple Menu appears.
3 . Click the menu options you want.
| NOTE |
Depending on the model of the USB HID keyboard and mouse may not
be compatible with your product.
Some HID keyboard keys may not work.
Wired USB keyboards are not supported.
Some applications may not be supported.
If a wireless HID Keyboard does not operate because of interference,
move the keyboard closer to the product.
Anynet+
(HDMI-CEC)
Anynet+ is a convenient function that offers linked operations
with other Samsung products that have the Anynet+ feature
and lets you control those products with one Samsung TV
remote. To operate this function, you must connect this
product to an Anynet+ Samsung TV using an HDMI cable.
| 28 English
HT-E4200_XU_0223.indd 28
2012-02-24 오전 2:15:02
The default PIN is 0000. Enter the default PIN to access the
security function if you haven't created your own password.
 BD Parental Rating: Prevents playback of Blu-ray Discs
with a rating equal to or above a specific age rating you
enter unless the PIN is entered.
 DVD Parental Rating: Prevents playback of DVDs with a
rating above a specific numerical rating you select unless
the PIN is entered.
 Change PIN: Change the 4-digit PIN used to access
security functions.
Settings
Security
You can select the language you prefer for the On-Screen
menu, disc menu, subtitles, etc.
• The language you select for the disc menu, disc audio, or
subtitles will only appear if it is supported on the disc.
04
Language
 If you forget your PIN
1 . Remove any disc or USB storage device.
2 . Press and hold the 5 button on the front panel for 5
seconds or more.
All settings will revert to the factory settings.
| NOTE |
When the factory default settings are restored, all the user stored BD
data will be deleted.
You can specify the display brightness and time zone.
General
DivX® Video
On Demand
Support
 Front Display: Lets you change the brightness of the front
panel.
 Time Zone: You can specify the time zone that is applicable
to your area.
 Menu Transparency: Adjust the transparency of the menu
box.
View DivX® VOD Registration Codes to purchase and play
DivX® VOD contents.
Software
Update
For more information about the Software Update function, see
"Upgrading Software" on page 33.
Contact
Samsung
Provides contact information for assistance with your product.
Remote
Management
When activated, lets Samsung Call Centre agents diagnose
and fix problems with the product remotely. Requires an active
Internet connection. Remote Management service might not
be available in some countries.
Reset
All settings will revert to the default except for the network and
Smart Hub settings. The default security password is 0000.
English
HT-E4200_XU_0228.indd 29
29 |
2012-02-28 오후 4:58:19
Settings
Networks and the Internet
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
49~51. Instructions for configuring the network
connection start below.
Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 above:
1 · Select Start in the Network Settings screen,
and then press the E button. The Network
Status screen appears. The product attempts
to verify the network connection and fails.
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the product to your router using a LAN cable or
Samsung Wireless LAN Adapter (sold separately)
before you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.
To begin configuring your network connection,
follow these steps:
1 · In the Home screen, select Settings, and
then press the E button.
2 · Select Network, and then press the E
button.
3 · Select Network Settings, and then press the
E button.
4 · Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks starting on page 31.
Wired Network
Network Settings
Wired network connection failed.
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
XX:XX:XX:XX:XX:XX
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Unable to connect to the network. Try the following:
check if your IP address is set correctly in IP Settings.
Contact your Internet service provider for more information.
Previous
IP Settings
Retry
OK
2 . Select IP Settings on the right of the screen,
and then press E button.
The IP Settings screen appears.
3 . Select the IP Mode field, and then set it to
Manual.
4 · Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
| NOTE |
You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on next page.
5 · When done, highlight OK, and then press
E button. The product verifies the network
connection and then connects to the
network.
Wired – Automatic
After following Steps 1 to 3 above:
1 · Select Start in the Network Settings screen,
and then press the E button. The product
detects the wired connection, verifies the
network connection and then connects to the
network.
| 30 English
HT-E4200_XU_0223.indd 30
2012-02-24 오전 2:15:05
< Getting the Network Settings Values >
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 30.
04
1 · Select Start in the Network Settings screen,
and then press the E button.
The product searches for and then displays a
list of the available networks.
Settings
• Windows XP
1 · Right click the Network icon on the bottom
right of the Windows desktop.
Wireless (General) - Automatic
2 · In the pop-up menu, click Status.
Network Settings
3 · On the dialog that appears, click the Support
tab.
Select your wireless router from the list.
1/10
iptime23
Refresh
4 · On the Support tab, click the Details button.
ELT
5 · The Network settings are displayed.
JSY
Previous
KT_WLAN_C361
• Windows 7
Mirhenge_edu
3 · On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
4 · On the Support tab, click the Details button.
The Network settings are displayed.
| NOTE |
Depending on your Windows version, the information may
differ.
Wireless Network
You can setup a wireless network connection in
three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
When you configure the wireless network
connection, any wireless network devices currently
connected through the product or, if applicable,
the product's current wired connection, will be
disconnected.
Next
Cancel
SO070VOIP
1 · Click the Network icon on the bottom right of
the Windows desktop.
2 · In the pop-up menu, click Network and
Sharing Centre.
WPS(PBC)
2 · Select the desired network, and then press
the E button.
3 · Select Next, and then press the E button
again.
4 · On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing E button.
5 · When done, select Next at the right of the
screen. The product verifies the network
connection and then connects to the
network.
| NOTE |
You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
Wireless (General) - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After folloiwng Steps 1 to 3 in "Configuring Your
Network Connection" on page 30.
English
HT-E4200_XU_0223.indd 31
31 |
2012-02-24 오전 2:15:07
Settings
1 · Select Start in the Network Settings screen,
and then press the E button. The product
searches for and then displays a list of the
available networks.
2 · Select the desired network or the Add
Network, and then press the E button.
3 · Select Next, and then press the E button
again.
4 · If you select the Add Network, enter your
wireless router's name to connect.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with the ▲▼◄► buttons,
and then pressing the E button.
Select Next, and then press the E button
again. You can select security type, and then
select Next, and then press the E button
again.
5 · On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
6 · When done, select Next at the right of the
screen, and then press the E button.
7 · The Network Status screen appears.
The product attempts to verify the network
connection and fails.
8 · Select IP Settings on the right of the screen,
and press the E button. The IP Settings
screen appears.
9 · Select the IP Mode field, and then set it to
Manual.
10 · Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
| NOTE |
You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 31.
11 · When done, highlight OK, and then press E
button. The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it
is done, highlight OK, and then press E
button.
WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a WPS(PBC)
button, follow these steps:
1 · Open the Home screen.
2 · Press the BLUE (D) button on the remote
control.
3 · Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
AllShare Settings
The AllShare Settings screen lists your network
connected AllShare devices and their IP
addresses. Through this screen, you can allow
a device to access the product, deny access, or
delete the device from the AllShare list.
1 · In the Home screen, select Settings, and
then press the E button.
2 · Select Network, and then press the E
button.
3 · Select AllShare Settings, and then press the
E button.
4 · Select a device, and then press the E
button. The AllShare Settings pop-up
appears.
5 · Select Allow, Deny, or Delete from List, and
then press the E button.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see pages 35~36.
| 32 English
HT-E4200_XU_0223.indd 32
2012-02-24 오전 2:15:09
Upgrading Software
1 · In the Home menu, select the Settings, and
then press the E button.
2 · Select Support, and then press the E
button.
3 · Select Software Update, and then press the
E button.
4 · Select one of the following methods:
• Online
• By USB
5 · If you do not make a selection in one minute
or select Update later, the product stores
the new upgrade software. You can upgrade
the software later using the By downloaded
function.
6 · If you select Don't update, the product
cancells the upgrade.
By USB
1 · Visit www.samsung.com.
• By Disc
2 · Click SUPPORT on the top right of the page.
• By downloaded
3 · Enter the product's model number into the
search field, and then click Find Product.
• Standby Mode Upgrade
5 · Press the E button.
Directions for each method begin below.
| NOTE |
The upgrade is complete when the product turns off, and
then turns on again by itself.
Samsung Electronics takes no legal responsibility for product
malfunction caused by an unstable Internet connection or
consumer negligence during a Software Update.
If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
Online
4 · Click Get downloads in the centre of the
page below the Downloads header.
5 · Click Firmware in the centre of the page.
6 · Click the ZIP icon in the File column on the
right side of the page.
7 · Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
8 · Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
9 · Copy the folder to a USB flash drive.
Your product must be connected to the Internet to
use the Online function.
10 · Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
1 · Select Online, and then press the E button.
The Connecting to Server message appears.
11 · In the product’s menu, go to Settings >
Support > Software Update.
2 · If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
12 · Select By USB.
English
HT-E4200_XU_0223.indd 33
Settings
• Never turn the product off or back on manually during
the update process.
4 · If you select Update now, the product
upgrades the software, turns off, and then
turns on automatically.
04
The Software Update menu allows you to
upgrade the product’s software for performance
improvements or additional services.
3 · When the download is complete, the
Upgrade Query window appears with three
choices: Update now, Update later or
Don't update.
33 |
2012-02-24 오전 2:15:10
Settings
| NOTE |
There should be no disc in the product when you upgrade
the software using the USB Host jack.
When the Software Update is done, check the software
details in the Software Update menu.
By downloaded
The By downloaded option lets you upgrade using
a file the product downloaded earlier but you
decided not to install immediately.
Do not turn off the product during the Software Update. It
may cause the product to malfunction.
1 · If upgrade software has been downloaded,
you will see the software version number to
the right of By downloaded.
Software Updates using the USB Host jack must be
performed with a USB flash memory stick only.
2 · Select By downloaded, and then press the
E button.
By Disc
1 · Visit www.samsung.com.
3 · The product displays a message asking if you
want to upgrade. Select Yes. The product
begins the upgrade.
2 · Click SUPPORT on the top right of the page.
4 · When the update is complete, the product
turns off automatically, and then turns on.
3 · Enter the product's model number into the
search field, and then click Find Product.
| NOTE |
4 · Click Get downloads in the centre of the
page below the Downloads header.
When the system upgrade is done, check the software
details in the Software Update menu.
5 · Click Firmware in the centre of the page.
Do not turn off the product during the Software Update. It
may cause the product to malfunction.
6 · Click the ZIP icon in the File column on the
right side of the page.
7 · Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
8 · Unzip the zip archive to your computer. You
should have a single .RUF file.
9 · Write the RUF file onto a disc. We
recommend a CD-R or DVD-R.
10 · Finalise the disc before you remove it from
your computer.
11 · Insert the disc into the product.
12 · In the product’s menu, go to Settings >
Support > Software Update.
13 · Select By Disc.
| NOTE |
When the system upgrade is done, check the software
details in the Software Update menu.
Do not turn off the product during the Software Update.
It may cause the product malfunction.
Standby Mode Upgrade
You can set the Standby Mode Upgrade function
so that the product downloads new upgrade
software when it is in Standby mode.
In Standby mode, the product is off, but its
Internet connection is active. This allows
the product to download upgrade software
automatically, when you are not using it.
1 · Press the ▲▼ buttons to select Standby
Mode Upgrade, and then press the E
button.
2 · Select On or Off.
If you select On, the product will automatically
download new upgrade software when it
is in Standby mode with the power off. If
it downloads new upgrade software, the
product will ask you if you want to install it
when you turn the product on.
| NOTE |
To use Standby Mode Upgrade function, your product
must be connected to the Internet.
If this function does not appear, you can upgrade to the
latest software and use it.
| 34 English
HT-E4200_XU_0223.indd 34
2012-02-24 오전 2:15:12
Media Play
Playing Video, Photo, or Music Content
To access the AllShare Play screen, select the
AllShare Play icon on the Main screen, and then
press the E button.
1 · Make sure that the source of the content
you want to play or view is connected to or
inserted into the product.
Using the AllShare Play Screen
2 · Use the ▲▼ buttons to select Videos,
Photos, or Music, and then press the E
button. The first source selection on the right
side is highlighted.
AllShare Play / My list /
Recently played
My List
Videos
3 · Use the ▲▼ buttons to select the source of
the content, and then press the E button.
Recently played files will be displayed here.
What's new
Recently updated 09.Jan.2012
View More
Photos
SAM_0001
SAM_0002
SAM_0003
SAM_0004
SAM_0005
Playlist
Music
| NOTE |
Sources displayed for each content type may differ.
No playlists have been created.
Create a playlist to access your content quickly and easily.
a Login ' Return
When the AllShare Play screen appears, it displays
My List and a list of content types - Videos,
Photos, and Music - on the left side. On the right,
it displays, by default, the content in My List: a
list of recently played or viewed items, a list of the
newest items you have viewed or listened to, and
your most recent Playlist. If you have never played
or viewed any items, or created a Playlist, this area
will be empty.
Media Play
The AllShare Play Screen
• Use the ◄► buttons to select an item, press
the TOOLS button to display the Tools menu,
select Play, and then press the E button. To
view or play another item, press the RETURN
(') button, and then repeat the process
described in the first sentence.
05
Your Blu-ray product can play Disc and USB
contents and the contents located on your PC,
DLNA compatible mobile phone, or NAS using the
AllShare Play function. For more information about
AllShare Play, refer to page 38.
Playing My List Items
To play displayed My List items, you must have
the source of the items connected to or inserted
in the product. For example, if recently played My
List photos came from a DVD disc, you must have
that disc in the product to view them.
4 · To control the playing of Videos, Photos, or
Music, see:
• Controlling Video Playback on page 40.
• Controlling Music Playback on page 42.
• Playing Photo Contents and Using the Tools
Menu when a File is Highlighted on pages
43~46.
| NOTE |
Depending on how and when you attach a content source
to the product and the content type, the product may
display a different series of screens to start playback. For
alternative playback methods see:
• Playing Files on a USB Storage Device or iPod/iPhone
on page 36.
• Playing Commercial Video Discs on page 37.
• Playing Commercial Audio Discs on page 37.
• Playing a Disc with User Recorded Content on page 38.
To play or view My List items, perform one of the
actions below:
• Use the ◄► buttons to select an item you
want to view or play, and then press the E
button. To view or play another item, press
the RETURN (') button, and then repeat the
process described in the first sentence.
English
HT-E4200_XU_0223.indd 35
35 |
2012-02-24 오전 2:15:15
Media Play
Playing Files on a USB Storage
Device or iPod/iPhone
You can play multimedia files located on a
connected USB device.
1 · With the product turned off, connect a USB
storage device or an iPod/iPhone.
2 · Turn on the product. When the Main screen
appears, select AllShare Play > Videos,
Photos or Music > Connected Device, and
then press the E button.
3 · The kind of content you selected on the
connected device is displayed. Depending
on how the contents is arranged, you will see
either folders, individual files, or both.
4 · Using the ▲▼◄► buttons on your remote,
select the desired contents. To open a folder,
select it, and then press the E button.
To play a file, select it, and then press the E
button.
5 · Press the RETURN (') button to exit a folder
or to return to the Main screen.
| NOTE |
AllShare Play
Play videos or music, or view photos from discs or connected devices.
Smart Hub
Function
Settings
Safely Remove USB d WPS(PBC)
OR
1-1. With the product turned on, connect a USB
storage device or an iPod/iPhone.
2-1. When screen below appears, use the ▲▼
buttons to select the kind of content you
want to view or play, and then press the E
button.
To prevent possible damage to the USB memory, you
must remove the USB storage device safely using the
“Safely Remove USB” function. Press the HOME button
to move to the Home menu, select the YELLOW (C)
button, and then press the E button.
The Photos, Videos menu does not support iPods or
iPhones.
Only the playback screen will appear on the TV. View other
iPod screens on the iPod player.
iPod/iPhone Models You Can Use
with This Product
iPod touch 3rd/2nd/1st generation
iPod classic / iPod with video
iPod with Click Wheel
iPod nano 5th/4th/3rd/2nd generation
iPhone 4S / iPhone 4
iPhone 3GS / iPhone 3G / iPhone
AllShare Play
New device connected.
Play videos orr music, or view photos from discs or conn
connected devices.
USB DISK
Videos
Photos
Music
" Enter ' Return
Smart Hubb
Function
Settings
Safely Remove USB d WPS(PBC)
| NOTE |
Even though the product will display all available folders,
it will only display files of the content type you selected
in Step 2 or 2-1. For example, if you selected music, you
will only be able to see music files. You can change this
selection using AllShare Play.
| 36 English
HT-E4200_XU_0223.indd 36
2012-02-24 오전 2:15:23
The Function Screen
You can also change sources by pressing the Function button
in the upper right of the remote.
AllShare Play / Music /
To access the Function Screen, select the
Function icon on the Main screen, and then press
the E button.
Options on the Function Screen
To select, highlight an option using the ▲▼
buttons, and then press the E button.
Digital In
Select to listen to the digital audio source
connected to Digital Audio In.
1 / 17
Audio CD
► TRACK 001
03:59
TRACK 002
04:34
04
34
TRACK 003
04:24
TRACK 004
04:01
TRACK 005
04:26
TRACK 006
05:07
TRACK 007
04:47
TRACK 008
03:59
TRACK 009
04:34
TRACK 010
04:02
‫ ٭‬TRACK 001
00:00 / 03:59
b Page Move / Tools ' Return
2 · To play a particular track, use the ▲▼ buttons
on the remote to select the track, and then
press the E button.
AUX
Select to listen to audio from the
analogue audio source connected to
Audio In.
Remote iPod
Select to listen to music from the iPod
connected to the iPod jack.
Pause a track.
Select to listen to the FM radio.
Play a track.
Tuner
Media Play
| NOTE |
1 · Place a pre-recorded, commercial audio disc
into the disc tray with the disc’s label facing up,
and then close the tray. The AllShare Play Music
screen appears listing the tracks. Playback of
the first track starts automatically.
05
On the Function Screen, you can select the audio
and/or video input source to view or listen to.
Playing Commercial Audio Discs
Music Screen Controls
Repeat one track or all tracks.
Play tracks in random order.
Playing Commercial Video Discs
Display the Equaliser.
1 · Place a disc into the disc tray with the disc’s
label facing up and then close the disc tray.
Playback starts automatically.
If playback does not start automatically, press
the 6 button on your remote or select the
AllShare Play option on the Main screen,
and then press the E button. See "Playing
Video, Photo, or Music Content" on page 35.
Adjust the equaliser manually.
(Only when equaliser mode is On)
| NOTE |
The Music Screen controls are only accessible when a track
is playing.
All controls do not appear at the same time.
For more information about playing music, go to "Controlling
Music Playback" on page 42.
English
HT-E4200_XU_0223.indd 37
37 |
2012-02-24 오전 2:15:36
Media Play
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded
on DVD or CD discs.
1 · Place a user recorded disc into the disc
tray with the disc’s label facing up, and then
close the tray. The Device Connected pop-up
appears.
For more information about playing photo contents, go to
Playing Photo Contents and Using the Tools Menu when a
File is Highlighted on pages 43~46.
For more information about playing video contents, go to
Controlling Video Playback on page 40.
Using the AllShare Network
Function
2 · Use the ▲▼ buttons to select the type of
content you want to view or play - Videos,
Photos, or Music - and then press the E
button.
AllShare lets you play Videos, Photos, or Music
located on your PC or your DLNA compatible
device through the product using a wireless
network connection.
| NOTE |
To Download the AllShare Software
Even though the product will display folders for all content
types, it will only display files of the content type you selected
in Step 2. For example, if you selected music, you will only
be able to see music files. You can change this selection
using AllShare Play.
To use AllShare with your PC or DLNA device, you
must install AllShare software on your PC.
You can download the PC software and get
detailed instructions for using AllShare from the
Samsung.com website.
3 · Use the ▲▼◄► buttons to select the folder
containing the content type you selected in Step
2, and then press the E button.
1 · Go to www.samsung.com.
4 · If you selected Music, the AllShare Play Music
screen appears listing the music files on the
disc. Use the ▲▼ buttons to select the file you
want to play, and then press the E button.
3 · On the Support page, enter the model
number of your product into the Model
Number field.
5 · If you selected Photos, the AllShare Play Photos
screen appears listing the photos on the disc.
Use the ▲▼◄► buttons to select the photo you
want to view, and then press the Ebutton.
6 · If you selected Videos, the AllShare Play Videos
screen appears listing the video files on the disc.
Use the ▲▼◄► buttons to select the video you
want to watch, and then press the E button.
| NOTE |
For the Music and Video folders, you can also push the
TOOLS button on your remote, and then select Play Folder to
play or view all the files in the folder automatically. Select the
folder first before pushing the TOOLS button.
For more information about playing music, go to Controlling
Music Playback on page 42.
2 · Click Support at the top of the page.
4 · On the page that appears, click Get
downloads on the left side under Downloads.
The Download Centre appears.
5 · On the Download Centre page, click the
Software tab.
6 · On the software tab, click the File icon on the
right side of the AllShare line.
7 · In the pop-up that appears, click Save File.
8 · Find the AllShare install file on your disk, and
then double click the file.
9 · In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
Download the AllShare Installation/Instruction
manual from the same Software Tab by clicking
the corresponding PDF file symbol in the File
column on the right. The file, in PDF format, will
download and open. You can view and/or save
the file.
| 38 English
HT-E4200_XU_0223.indd 38
2012-02-24 오전 2:15:46
Playing Content Located on Your PC or
DLNA Device through the Product
Product
PC
Product
Play back
PC's files
Play back
PC's files
AllShare Connection
1 · Connect the product, your PC, and/or your
DLNA compatible cell phone to the same
wireless network.
2 · Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
3 · Select AllShare Play in the product's Home
screen, and then press the E button. The
AllShare Play screen appears.
4 · Select the connected DLNA compatible
device or your PC, and then press the E
button. A screen listing the available files
appears.
5 · Select the file you want to play or view, and
then press the E button.
Media Play
PC
05
Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
AllShare
Connection
Control PC's files to
Product
Smart Phone
(Only available with Samsung phones supporting
AllShare functionality.)
1 · Connect the product, your PC, and your
DLNA compatible cell phone to the same
wireless network.
2 · Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
3 · On your computer, using the AllShare
software, confirm your phone is connected.
4 · On the phone, select the file you want to view
or play, and then select the Blu-ray product
as the playback device.
5 · On the phone, start playback.
English
HT-E4200_XU_0223.indd 39
39 |
2012-02-24 오전 2:15:48
Media Play
Controlling Video Playback
You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage
devices. Depending on the disc, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video Playback
DISC MENU
TITLE MENU
0

POPUP
Using the disc menu, title menu, popup
menu and title list
DISC MENU
During playback, press this button to
display the Disc menu.
TITLE MENU
During playback, press this button to
display the Title menu.
• If your disc has a playlist, press the
GREEN (B) button to go to the playlist.
POPUP MENU
During playback, press this button to
display the Pop-up menu.
MUTE
FULL SCREEN

HOME
REPEAT
Repeat Playback
1 · During playback, press the REPEAT
button on the remote control.
2 · Press the ▲▼ buttons to select
a Chapter or Title, then press the
E button.
| NOTE |
Repeat a Title The screen may not display Chapter or Title
or Chapter
immediately. Continue to press the ▲▼
buttons until your choice is inside the blue
field.
3 · To return to normal play, press the
REPEAT button again, press the
▲▼ buttons to select Off, and then
press the E button.
1 · During playback, press the REPEAT
button on the remote control.
2 · Press the ▲▼ buttons to select
Repeat A-B.
| NOTE |
Repeat a
Section
The screen may not display Repeat A-B
immediately. Continue to press the ▲▼
buttons until Repeat A-B is inside the blue
field.
3 · Press the E button at the point
where you want repeat play to start (A).
4 · Press the E button at the point
where you want repeat play to stop (B).
5 · To return to normal play, press the
REPEAT button again.
6 · Press the E button.
| NOTE |
DISC MENU or During playback, press this button to
TITLE MENU display the title list.

Playback related buttons
The product does not play sound in Search, Slow,
or Step mode.
6
Starts playback.
5
Stops playback.
7
Pauses playback.
Fast Motion
Play
During playback, press the 3 or button.
Each time you press the 3 or button, the playback speed will change.
Slow Motion
Play
In pause mode, press the button.
Each time you press the button, the
playback speed will change.
Step Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
Skip Motion
Play
During playback, press the 1 or 2
button.
Each time you press 1 or 2 button,
the disc moves to the previous or next
chapter or file.
You must set point (B) at least 5 seconds of
playing time after point (A).
| 40 English
HT-E4200_XU_0223.indd 40
2012-02-24 오전 2:15:53
Menu that appears only when BD/DVD disc
During playback, press the TOOLS button.
plays
Repeat Mode
Select to repeat a specific Title, Chapter
(BD/DVD discs only) or marked section.
Works the same as the REPEAT button.
See page 40.
Full Screen
Select to set the desired full screen
size. You can select Original, Mode1
(larger), and Mode2 (largest).
Picture Mode
Select to set the picture mode.
- Dynamic : Choose this setting to
increase sharpness.
- Standard : Choose this setting for
most viewing applications.
- Movie : This is the best setting for
watching movies.
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
| NOTE |
Play from the
beginning
Select to play the movie from the
beginning.
Chapter Search
Select to move to a chapter that you
desire to watch.
Audio
Select to set the desired audio
language.
- You can also operate this function
by pressing the AUDIO button on the
remote control.
Subtitle
Select to set the desired subtitle
language.
- You can also operate this function
by pressing the SUBTITLE button on
the remote control.
Angle
To view a scene from another angle.
The Angle option displays the number
of angles available to view (1/1, 1/2,
1/3, etc.).
BONUSVIEW
Video /
BONUSVIEW
Audio
Select to set the desired bonusview
option.
Media Play
Title Search
Time Search
Select to move to a desired title if
the disc has more than one title, to a
desired scene, or, using Time Search,
to a specific point in a movie or video.
With Time Search, you designate
the specific point by entering a time
coordinate in the following format
00:00:00 (hours, minutes, seconds)
using the remote.
05
Using the TOOLS Menu
Menu that appears only when a file plays
Go to Videos
List
Move to video list screen.
Scene Search
Search the video file by the scene.
Information
Check the video file's information.
When you select User, the User
Settings screen appears. Select an
option, press E, use the ◄►
buttons to make an adjustment, and
then press E. Press the RETURN
(') button to go back to the TOOLS
menu.
| NOTE |
When you use the BD wise function,
this menu will not appear.
Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
Equaliser Mode Select to use the Equaliser.
Select to set the Equaliser.
Equaliser
Settings
| NOTE |
It only appears when equaliser
mode is on.
English
HT-E4200_XU_0223.indd 41
41 |
2012-02-24 오전 2:15:58
Media Play
Shuffling Tracks on an Audio CD
Controlling Music Playback
You can control the playback of music content
located on a DVD, CD, or a USB storage device.
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
Buttons on the Remote Control used
for Music Playback
1 · During playback, use the ► button to select
in the lower right corner of the screen,
and then press the E button.
RDS DISPLAY
6
2
3
PTY SEARCH
PTY+
4
5
6
7
8
9
DISC MENU
POPUP
5
1
Creating a Playlist
TITLE MENU
0
MUTE
4
2 · Use the ▲▼ to set the Shuffle Mode On or
Off, and then press the E button.
TA
1
PTY-
1
AllShare Play / Music /
2
3
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or button.
Each time you press the 3 or button, the
playback speed will change.
2 7 button : Pause a track.
3 6 button : Plays the currently selected track.
4 5 button : Stops a track.
Skip : During playback, press the 1 or 2 button
5 to move to the previous or next music of listed.
NUMBER buttons : During Playlist playback, press
6 the desired track number. The selected track is
played.
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1 · During playback, use the ► button to select
in the lower right corner of the screen,
and then press the E button.
2 · Use the ▲▼ to select the repeat mode you
want - Off, One Song, or All - and then
press the E button.
1 / 17
Audio CD
► TRACK 001
03:59
TRACK 002
04:34
04
34
TRACK 003
04:24
TRACK 004
04:01
TRACK 005
04:26
TRACK 006
05:07
TRACK 007
04:47
TRACK 008
03:59
TRACK 009
04:34
TRACK 010
04:02
‫ ٭‬TRACK 001
00:00 / 03:59
b Page Move / Tools ' Return
1 · With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
2 · Use the ▲▼ buttons to select Play selection,
and then press the E button. The Play
selection screen appears.
3 · Use the ▲▼ buttons to select a track, and
then press the E button. A check appears
to the left of the track.
4 · Repeat Step 3 to select and check additional
tracks.
5 · To remove a track from the list, move to the
track, and then press the E button again.
The check on the track is removed.
6 · When done, press the ► button to select
Play, and then press the E button. The
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
| NOTE |
You can create a playlist with up to 99 tracks on Audio
CDs (CD-DA).
If you have created a playlist, Play selection is replaced by
Edit playlist on the Tools menu.
On the Play selection screen, you can also choose Select
All, Deselect All, and Cancel.
| 42 English
HT-E4200_XU_0223.indd 42
2012-02-24 오전 2:16:00
• Use Deselect All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to select
all the tracks, and then press the RETURN (') button
on your remote or select PLAY and then press the E
button. If you do not use Select All or select individual
tracks, the Playlist will not change.
You can play photo contents located on a DVD,
USB, mobile device or PC.
• Cancel cancells any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
Ripping
You can rip music from a music CD to a USB
device inserted in the USB jack.
1 · Insert a USB device into the USB jack on
the front of the product, and then press the
RETURN (') button on your remote.
2 · Insert the disc you want to rip from into the
product and close the disc tray.
3 · With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
4 · Use the ▲▼ buttons to select Rip, and
then press the E button. The Rip screen
appears.
5 · Use the ▲▼ buttons to select a track, and
then press the E button. A check appears
to the left of the track.
6 · Repeat Step 5 to select and check additional
tracks.
7 · To remove a track from the list, move to the
track, and then press the E button again.
The check on the track is removed.
8 · When done, press the ► button to select
Rip, and then press the E button. The Rip
pop-up appears.
9 · Press the E button to begin the ripping
process. The Ripping Completion Bar pop-up
appears.
10 · When ripping is complete, the “Ripping
completed.” message appears. Press the
E button.
11 · Press the RETURN (') button to go back to
the Playback screen.
When Ripping is done, a folder called MP is created in the
USB.
Playing Photo Contents
Using the Tools Menu
During playback, press the TOOLS button.
Go to Photos
List
Select to go to the list of photos on the
current media.
Start Slide
Show
Select to start the slide show.
Slide Show
Speed
Select to set a slide show's speed.
Slide Show
Effect
Select to set a slide show's special
effects.
Background
Music On
Select to listen to music while viewing
a slide show.
Background
Music Setting
Select to set the background music
setting.
Picture Mode
Select to set the picture settings.
- Dynamic : Choose to increase
Sharpness.
- Standard : Choose for most viewing
applications.
- Movie : This is the best setting for
watching movies.
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
| NOTE |
When you use the BD wise function,
this menu will not appear.
Zoom
Select to enlarge the current picture.
(Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This will
rotate the picture either clockwise or
counter clockwise.)
Information
Shows the picture information.
English
HT-E4200_XU_0223.indd 43
Media Play
| NOTE |
05
• Use Select All to select all tracks. This cancells
your individual track selections. When you press the
RETURN (') button on your remote or select PLAY and
then press the E button, all tracks will appear on the
Music Playback screen, and the product will begin to
play all tracks from Track 001.
43 |
2012-02-24 오전 2:16:12
Media Play
| NOTE |
Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
Earliest Date
To enable the background music function, the photo file
must be in the same storage media as the music file.
However, the sound quality can be affected by the bit rate
of the MP3 file, the size of the photo, and the encoding
method.
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the earliest to latest date.
Monthly
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by the month created.
Play selection lets you select specific
music, video, and photo files to play.
It works essentially the same for all
media. The example below is for
photos.
You can't enlarge the subtitle and PG graphic in the full
screen mode.
Using the Tools Menu when a File
is Highlighted
1. On the Thumbnail View screen,
highlight a photo, and then press
the TOOLS button on the remote.
When a file is highlighted, press the TOOLS
button.
View
Select to access the sort options: Artist,
Genre, Monthly, Latest Date, etc. The
sort options that appear depend on the
storage and media type.
Folder view
Appears in the View function screen.
Select to display the folders on the
storage device.
Title
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by title.
Artist
Appears on the View function screen.
Select Artist to sort and then display
all music tracks on a storage device by
artist.
Album
Appears on the View function screen.
Select Album to sort and then display
all music tracks on a storage device by
album.
Genre
Appears on the View function screen.
Select Genre to sort and then display
all music tracks on a storage device by
genre.
Latest Date
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the latest to earliest date.
2. In the Tools menu, select Play
selection, and then press the E
button.
3. On the selection screen, use the
▲▼◄► buttons to select a
photo you want to view, and then
press the E button.
A check mark appears to the left
of the picture.
4. Repeat Step 3 for each photo you
want to view.
Play selection
5. To de-select a photo, highlight it,
and then press the E button.
6. When done, use the ◄► buttons
to select Play, and then press
the E button. A slide show
containing the photos you selected
begins.
7. To pause the slide show, press the
E button once. To restart the
slide show, press the E button
again.
8. To stop the slide show, press the
RETURN (') button.
| NOTE |
After the slide show begins, you can
control the slide show by pressing
the TOOLS button and displaying
the Slide Show menu. See " Using
the Tools Menu" page 43.
| 44 English
HT-E4200_XU_0223.indd 44
2012-02-24 오전 2:16:14
Send
2. Repeat for each track or file you
want to upload.
| NOTE |
You can also move to Select All on
the right, and then press the E
button to select all tracks or files.
Depending on the screen you are
viewing, select Delete to erase a file
Delete (Playlist)
from erasable media (such as a USB
device) or to delete a playlist.
Select Edit playlist to remove files or
tracks from an existing playlist. The
storage device containing the playlist
must be inserted into or attached to
the product.
3. Select Send on the right side, and
then press the E button.
4. Use the ▲▼ buttons to select the
on line site you want to upload the
files or tracks to, and then press
the E button.
Login / Out
The Log In/Out function lets you log in
to your online Samsung account.
Edit playlist
Select to create a playlist or add files
or tracks to a playlist.
3. Select Remove on the right side,
and then press the E button.
3. Repeat for each track or file you
want to add.
5. On the screen that appears,
perform one of the following
actions:
• Select the Playlist to which you want
to add the tracks or files and then
press E button.
2. Repeat for each track or file you
want to remove.
You can also move to Select All on
the right, and then press the E
button to select all tracks or files.
2. Use the ▲▼◄► buttons to
highlight a track or file, and then
press the E button.
4. Select Add on the right, and then
press the E button.
1. Use the ▲▼◄► buttons to
select a file, and then press the
E button.
| NOTE |
1. Select Add to Playlist, and then
press the E button.
Add to Playlist
Play Current
Group
After you have sorted by Artist, Genre,
Album,Title, Latest Date, Earliest Date,
or Monthly, select a group that is the
result of the sort (for example, all
pictures taken in August), and then
select Play Current Group to play or
view the files in that group only.
Go to Playlist
Select to go to the Playlist section of
the Main AllShare screen.
English
HT-E4200_XU_0223.indd 45
Media Play
1. Use the ▲▼◄► buttons to
select a file, and then press the
E button.
05
• Select Create new, and then press
the E button. On the keyboard
pop-up that appears, create a name
for the new playlist. Enter numbers
using the numbers on the remote.
Enter letters by using the ▲▼◄►
buttons to move the cursor, and
then pressing the E button.
When finished, move to DONE at
the bottom of the screen, and then
press the E button.
Select Send to upload selected files
to Picasa, Facebook, Cloud Storage, N
Drive, or Family Story.
To use Send, you need to establish an
account with the on-line site, and then
log in using the Log In function.
45 |
2012-02-24 오전 2:16:15
Media Play
Encoding
Information
Encoding - which changes by language
or by geographical area - modifies
how the product sorts, arranges, and
presents files or tracks, displays dates,
etc. Select Encoding to change the
encoding to match your language or
geographical area.
Displays media file and content
information.
| NOTE |
Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
Listening to Radio
Using Buttons on the Remote Control
Presetting Stations
Example : Presetting FM 89.10 into memory.
1 · Press the FUNCTION button to select FM.
2 · Press the TUNING/CH (,.) button to
select <89.10>.
3 · Press the TUNER MEMORY button.
• NUMBER flashes on the display.
4 · Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its
own.
• After you press the TUNER MEMORY
button, NUMBER disappears from the
display and the station is stored in memory.
5 · To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
TUNING/CH (,.) button.
1 · Press the FUNCTION button to select FM.
2 · Tune in to the desired station.
• Preset Tuning 1 : Press the 5 button
to select PRESET and then press the
TUNING/CH (,.) button to select the
preset station.
- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
• Manual Tuning : Press the 5 button
to select MANUAL and then press the
TUNING/CH (,.) button to tune in to a
lower or higher frequency.
• Automatic Tuning : Press the 5 button
to select MANUAL and then press and
hold the TUNING/CH (,.) button to
automatically search the band.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
About RDS Broadcasting
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station
names, as well as information about what type of
program they broadcast, such as sports or music,
etc.
When tuned to an FM station which provides the
RDS service, the RDS indicator lights up on the
display.
Description on RDS function
• PTY (Program Type) : Displays the type of
program currently being broadcast.
• PS NAME (Program Service Name) : Indicates
the name of broadcasting station and is
composed of 8 characters.
• RT (Radio Text) : Decodes the text broadcast by
a station (if any) and is composed of maximum
64 characters.
| 46 English
HT-E4200_XU_0223.indd 46
2012-02-24 오전 2:16:17
• CT (Clock Time) : Decodes the real time clock
from the FM frequency. Some stations may not
transmit PTY, RT or CT information therefore
this may not be displayed in all cases.
• TA (Traffic Announcement) : TA ON/OFF it shows
that the traffic announcement is in progress.
PTY (Program Type) indication and
| NOTE |
To search for a program using the PTY
You can see the RDS signals the station sends on
the display.
Press the RDS DISPLAY button while listening to
an FM station.
• Each time you press the button, the display
change to show you the following information :
PS NAME RT CT Frequency
PS
(Program
Service)
While searching, <PS NAME> appears
and then the station names will be
displayed. <NO PS> appears if no
signal is sent.
RT
(RadioText)
While searching, <RT> appears and
then text messages the station sends
will be displayed. <NO RT> appears if
no signal is sent.
Frequency
Station frequency (non-RDS service)
codes
Before you start!
• The PTY Search is only applicable to preset
stations.
• To stop searching any time during the process,
press 5 button while searching.
• There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
• When pressing the buttons on the primary
remote control, make sure that you have
selected the FM station using the primary
remote control.Usin
RDS DISPLAY
TA
1
2
3
PTY-
PTY SEARCH
PTY+
4
5
6
About characters shown in the display
1 · Press the PTY SEARCH button while
listening to an FM station.
When the display shows PS,or RT signals,the
following characters are used.
• The display window cannot differentiate upper
case and lower case letters and always uses
upper case letters.
• The display window cannot show accented
letters, <A,> for instance, may stands for
accented <A’s> like <À, Â, Ä, Á, Å and Ã.>
2 · Press the PTY- or PTY+ button until the PTY
code you want appears on the display.
• The display gives you the PTY codes
described to the right.
3 · Press the PTY SEARCH button again, while
the PTY code selected in the previous step is
still on the display.
• The centre unit searches 15 preset FM
stations, stops when it finds the one you
have selected, and tunes in that station.
English
HT-E4200_XU_0223.indd 47
Media Play
To show the RDS signals
One of the advantages of the RDS service is that
you can locate a particular kind of program from
the preset channels by specifying the PTY codes.
05
RDS may not operate correctly if the station tuned is not
transmitting RDS signal properly or if the signal strength
is weak.
PTY-SEARCH function
47 |
2012-02-24 오전 2:16:18
Media Play
Using the Special Effects Remote
Control Buttons
SOUND
SOUND EFFECT Function
EFFECT
Lets you select a mode that optimizes the sound.
1. Press the SOUND EFFECT button.
2. Press the ▲▼ button to select the desired mode:
DSP or Sound Mode.
3. Press the ◄► buttons to select the desired sound
effect.
DSP
MP3 Enhancer  Power Bass Off
Playing a 2D video in 3D mode
You can enjoy an ordinary 2D video in 3D mode.
| NOTE |
If you move to the Home or Smart Hub Home menu in
3D mode, it will switch to 2D automatically.
vTuner
vTuner
vTuner is the function of the listening a radio. If you press
the vTuner button, you can move to vTuner application.
You can use the vTuner Function after download the
vTuner application from Samsung Apps.
• MP3 Enhancer : Helps enhance your sound experience
(ex. mp3 music). You can upscale your MP3 level sound
(24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit).
• Power Bass : Increases the volume level of bass tones
and provides thudding sound effects.
• Off : Select this for normal listening.
Sound Mode
Virtual Sound  Music  News  Drama  Cinema
 Sports  Game  Off
3D Sound
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off  High  Medium  Low
| NOTE |
It is not available in FM mode.
| 48 English
HT-E4200_XU_0223.indd 48
2012-02-24 오전 2:16:21
Network Services
Smart Hub at a Glance
1
34
Network Services
To use network services, you must first:
2
06
You can enjoy various network services such as
Smart Hub or BD-LIVE by connecting the product
to your network.
Search
1 · Connect the product to the network.
(See page 22)
2 · Configure the network settings.
(See pages 30~32)
0
9
Samsung Apps
Your Video
Family Story
Fitness
Kids
5
6
Contents 1
Contents 2
Contents 3
Contents 4
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
7
Using Smart Hub
Using Smart Hub, you can download movies,
videos, and music from the Internet, and access
various for pay or free-of-charge applications
and view them on your TV. Application content
includes news, sports, weather forecasts, stock
market quotes, maps, photos, and games.
For instructions that explain how to use Smart
Hub, follow these steps:
a Login b WallPaper / Tools ' Return
1
Your Video : Provides recommendations for videos
based on your tastes.
2
Search : Provides an integrated search of your
video providers and connected AllShare devices.
3
Recommended : Displays recommended contents
managed by Samsung.
4
Commercial : Displays the Smart Hub Guide, an
introduction to the product, and new application
introductions.
5
Family Story : An effortless way to access family
content.
• Provides access to family photos, messages, and
events, anytime and anywhere.
6
Fitness : Gateway to the Unified Self-Care Service.
• Presents fitness videos from various content
partners with feedback on calories burned after
every workout.
7
Kids : Kids service gives kids an easy and safe way
to enjoy their favourite content.
• Provides a wide variety of fun and safe content
for children.
8
Navigation Help : Displays the remote control
buttons you can use to navigate in Smart Hub.
• RED (A) : To log in to Smart Hub.
• GREEN (B) : To display the background screen.
• Tools : To display the settings window.
• Return : To return to the previous menu.
1 · Go to www.samsung.com.
2 · Click Support at the top of the page.
3 · On the Support page, enter the model
number of your product into the Model
Number field.
4 · On the page that appears, click Get
downloads on the left side under Downloads.
The Download Centre appears.
5 · On the Download Centre page, click the
Manuals tab.
6 · On the Manuals tab, click the file icon to the
right of Smart Hub Users Manual. The manual
downloads.
| NOTE |
The web location of the Smart Hub manual is subject to
change without notice.
English
HT-E4200_XU_0223.indd 49
8
49 |
2012-02-24 오전 2:16:24
Network Services
9
My Applications : Displays your personal gallery
of applications which you can add to, modify, and
delete.
0
Samsung Apps : Open Samsung Apps to download
various for pay or free-of-charge application
services.
Web Browser at a Glance
1
http://www.google.com/
Using the Web Browser
You can access the internet using the Web
Browser application which is installed in the Smart
Hub screen by default.
Google Search
b Control Panel Link Browsing / Tools ' Exit
1 · Select Smart Hub on the Home screen, and
then press the E button.
2 · Select the Web Browser application in Smart
Hub, and then press the E button.
| NOTE |
When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV - and BD
Wise is on - the browser is maximized to fill the screen
and the TV's resolution is set to the optimal resolution
automatically.
The Web Browser is not compatible with Java
applications.
If you attempt to download a file, and the file can not be
saved, an error message will appear.
The playback of Flash videos is not supported.
E-commerce, for purchasing products online, is not
supported.
ActiveX is not supported.
I’m Feeling Lucky
1
2
Control Panel : Displays the various Web Browser
functions.
•
: Moves to the previous page.
: Moves to the last page before going back.
•
• : Reloads the current page so that it is
refreshed on the screen.
•
: Moves to the Home screen of the Web
Browser.
• : Allows you to zoom in or out of the screen at
various percentages.
•
: Allows you to bookmark specific pages so
that you can move to them easily.
: Allows you to view the history of your visited
•
pages by date, name, or frequency.
http://www.google.com/
•
: Allows you to enter a
page address manually or select a page from the
visited page list to move to that page.
•
: Allows you to switch easily between
multiple, currently open Web Browser windows.
: Allows you to search for information by
•
entering words.
•
: Lets you share the current site with your
family group by sending a message.
•
: Allows you to configure all settings for using
the Web Browser.
| 50 English
HT-E4200_XU_0223.indd 50
2012-02-24 오전 2:16:28
06
2
Navigation Help : Displays the remote control
buttons you can use to navigate in Web Browser.
• GREEN (B) : To display the Control Panel.
• YELLOW (C) : To search a link.
• Tools : To display Tools window.
• Exit : To return to the previous menu.
Network Services
BD-LIVE™
Once the product is connected to your network,
you can enjoy various movie-related service
contents available on BD-LIVE compliant discs.
1 · Attach a USB memory stick to the USB jack
on the front of the product, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
2 · Select Settings on the Home screen, and
then press the E button.
3 · Select Network, and then press the E
button.
4 · Select BD-Live Settings, and then press the
E button.
5 · Select BD Data Management, and then
press the E button.
6 · Select Select Device, and then press the
E button.
7 · Select USB, and then press the E button.
8 · Insert a Blu-ray Disc that supports BD-LIVE.
9 · Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
| NOTE |
The way you use BD-LIVE and the provided contents may
differ, depending on the disc manufacturer.
English
HT-E4200_XU_0223.indd 51
51 |
2012-02-24 오전 2:16:30
Appendix
Additional Information
Note
HDMI OUT
Connections
• Certain HDMI output resolutions may not work, depending on your TV.
• You must have an HDMI connection to enjoy videos with 3D technology.
• A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the
menu.
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray
menu.
• Depending on the content and the position of the picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option which is different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of
picture).
BD Wise (Samsung Products only)
Settings
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
• If the product is connected to a device that does not support BD Wise, you can not use the BD
Wise function.
• For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby digital,
DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• This Digital Output setup does not affect the analogue (L/R) audio or HDMI audio output to your
TV.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
BD-LIVE Internet Connection
• The Internet connection may be restricted while you are using BD-LIVE contents.
| 52 English
HT-E4200_XU_0223.indd 52
2012-02-24 오전 2:16:32
Anynet+ (HDMI-CEC)
Appendix
BD Data Management
07
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
• In the external memory mode, disc playback may be stopped if you disconnect the USB device in
the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster
read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on the conditions.
Settings
DivX® Video On Demand
• For more information about DivX(R) VOD, visit “http://vod.divx.com”.
Speaker Settings
• When Speaker Selection is selected to TV Speaker, audio is produced through TV speakers.
HDMI audio
• When HDMI audio output to the TV speaker, it is automatically down-mixed to 2 channels.
Audio Return Channel
• When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.
• Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility
problem.
• The ARC function is only available if an ARC-compliant TV is connected.
Digital Output
• Digital Output can be activated when Speaker Selection is selected to TV Speaker.
Playing a Video files
• Video files with high bit rates of 20Mbps or more strain the product’s capabilities and may stop
playing during playback.
Selecting the Audio Language
Playback
• The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the languages that are
encoded on the disc. This function or certain languages may not be available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby digital audio soundtrack in
English.
English
HT-E4200_XU_0223.indd 53
53 |
2012-02-24 오전 2:16:34
Appendix
Selecting the Subtitle Language
Playback
• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the
Disc Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same time.
• The total number of primary and secondary subtitles are displayed respectively.
Playing a JPEG files
• You can’t enlarge the subtitle and PG graphic in the full screen mode.
Using the TOOLS button while playing pictures
• If the system is connected to a BD Wise compliant TV that has set BD Wise to On, the Picture
Settings menu will not appear.
• The Background Music function will not work unless the music file and the photo file are located
on the same storage media. Also, sound quality can be impacted by the bit rate of the MP3
music file, the size of the photos, and the encoding method.
AllShare Play
Playing back a USB Storage Device
• You must remove the USB storage device safely (by performing the “Safely Remove USB”
function) to prevent possible damage to the USB memory. Press the HOME button to move to the
Home menu, select the YELLOW (C) button, and then press the E button.
Playing Music
• Adjust the volume to a moderate level before you connect your iPod to the product.
• When the product is on and you connect an iPod, the product will charge the iPod's battery.
iPod/iPhone Models You Can Use with This Product
iPod
• The volume control may not operate normally with iPod and iPhone models not listed on page
36. If you have a problem with any of the models listed above, please update the software of the
iPod/iPhone to the lastest version.
• Depending on the software version of the iPod, control problems may occur. This is not a
malfunction of the Home Cinema.
• Depending on the software version or the type of iPod, some operations may differ. Install the
latest iPod software. (recommended)
• Playback of applications' contents through the product is not guaranteed. We recommend
playing contents downloaded to the iPod.
• If you have a problem using your iPod, please visit www.apple.com/support/ipod.
| 54 English
HT-E4200_XU_0223.indd 54
2012-02-24 오전 2:16:35
Resolution according to the output mode
Blu-ray Disc/E-contents/Digital Contents playback
07
Output
HDMI Mode
Setup
E-contents/
Digital contents
Blu-ray Disc
VIDEO
Mode
VIDEO Mode
BD Wise
Resolution of Blu-ray Disc
1080p@60F
576i/480i
-
Auto
Max. Resolution of TV input
Max. Resolution of TV input
576i/480i
-
1080p@60F
1080p@60F
1080p@60F
576i/480i
-
Movie Frame : Auto
(24Fs)
1080p@24F
1080p@24F
576i/480i
-
1080i
1080i
1080i
576i/480i
576i/480i
720p
720p
720p
576i/480i
576i/480i
576p/480p
576p/480p
576p/480p
576i/480i
576i/480i
576i/480i
-
-
-
576i/480i
Appendix
HDMI/not
connected
HDMI/connected
DVD playback
HDMI/connected
Output
Setup
HDMI/not connected
HDMI Mode
VIDEO Mode
VIDEO Mode
BD Wise
576i/480i
576i/480i
-
Auto
Max. Resolution of TV input
576i/480i
-
1080p@60F
1080p@60F
576i/480i
-
1080i
1080i
576i/480i
576i/480i
720p
720p
576i/480i
576i/480i
576p/480p
576p/480p
576i/480i
576i/480i
576i/480i
-
-
576i/480i
English
HT-E4200_XU_0223.indd 55
55 |
2012-02-24 오전 2:16:37
Appendix
Digital Output Selection
Setup
PCM
Connection
Bitstream
(Re-encoded DTS)
Bitstream
(Re-encoded Dolby
D)
HDMI supported AV receiver
PCM
Up to PCM 7.1ch
PCM
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Up to PCM 7.1ch
Dolby Digital
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Plus
Up to PCM 7.1ch
Dolby Digital Plus
DTS re-encoded
Re-encoded
Dolby Digital *
Up to PCM 7.1ch
Dolby TrueHD
DTS re-encoded
Re-encoded
Dolby Digital *
Up to PCM 6.1ch
DTS
DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
Up to PCM 7.1ch
DTS-HD High
Resolution Audio
DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD
Master Audio
Up to PCM 7.1ch
DTS-HD Master Audio
DTS re-encoded
Re-encoded
Dolby Digital *
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Up to PCM 5.1ch
Dolby Digital
Dolby Digital
Dolby Digital
Up to PCM 6.1ch
DTS
DTS
Audio Stream
Dolby TrueHD
on Blu-ray
Disc
DTS
PCM
Audio Stream
Dolby Digital
on DVD
DTS
Definition for
Blu-ray Disc
Bitstream
(Unprocessed)
Any
Decodes the main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and adds
Navigation Sound
Effects.
the main
Outputs only the main Decodes
feature audio and
feature audio stream BONUSVIEW
audio
so that your AV
stream together into
receiver can decode PCM
audio and adds
the audio bitstream.
Navigation Sound
You will not hear
Effects, then reBONUSVIEW audio
encodes the PCM
or Navigation Sound
audio into DTS
Effects.
bitstream.
DTS
Decodes the main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and adds
Navigation Sound
Effects, then reencodes the PCM
audio into Dolby
digital bitstream or
PCM.
* If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be
PCM 2ch.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Blu-ray Disc.
| 56 English
HT-E4200_XU_0224.indd 56
2012-02-24 오전 11:50:28
Troubleshooting
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
The iPod fails to connect.
• Check the condition of the iPod connector.
• Keep the iPod software version up to date.
Playback does not start.
• Check the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• The home cinema does not play sound during fast playback, slow playback,and step motion
playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
The remote control does not
work.
• Are you operating the remote within its operational range and within the proper angle relative to
the sensor?
• Are the batteries drained?
• Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly?
• The disc is rotating but no
picture is produced.
•
•
•
•
• Picture quality is poor and
picture is shaking.
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
Audio language and subtitles
do not work.
• Audio language and subtitles will not work if the disc does not contain them.
The menu screen does not
appear even when the menu
function is selected.
• Are you using a disc that does not contain menus?
The aspect ratio cannot be
changed.
• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the
Blu-ray Disc jacket and then select the appropriate function.
English
HT-E4200_XU_0223.indd 57
Appendix
Symptom
07
Refer to the table below when this product does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect
the power cord and contact the nearest authorized dealer or Samsung Electronics Service Centre.
57 |
2012-02-24 오전 2:16:39
Appendix
Symptom
• The product is not
working.
(Example: The power goes
out or a strange noise is
heard.)
Check/Remedy
• Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• The Product is not working
normally.
You have forgotten the
rating level password.
• With no disc in the product, press and hold the product's 5 button for longer than 5
seconds. INIT appears on the display and all settings will return to the default values.
Then, press the POWER button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio
through the Product, no
sound is heard.
• If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the D. IN or
AUX functions, the Blu-ray/DVD disc functions are turned on and the TV audio is muted.
"Not Available" appears on
screen.
• The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a
resolution your TV cannot
support (for example, 1080p),
you may not see a picture on
your TV.
• Press and hold the 5 button on front panel for more than 5 seconds with no disc
inserted. All settings will revert to the factory settings.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support HDCP (Highbandwidth Digital Content Protection).
AllShare Play function
I can see folders shared
through AllShare Play,
but I cannot see the files.
• AllShare Play shows only files corresponding to the Photo, Music, and Movie categories.
Files that do not correspond to these categories may not be displayed.
| 58 English
HT-E4200_XU_0223.indd 58
2012-02-24 오전 2:16:41
Symptom
Check/Remedy
The AllShare Play
connection between the TV
and PC is unstable.
• IP address under the same subnetwork should be unique, otherwise IP collision can
results in such a phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
Appendix
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is not overloaded.
• The wireless connection between the server and the product is unstable.
Check the connection.
07
Video is played
intermittently.
BD-LIVE
I cannot connect to the
BD-LIVE server.
• Test whether the network connection is successful by using the Network Status function.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the BD-LIVE
service.
You can check the available size in BD Data Management. (See page 53)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
• The memory device must have at least 1GB of free space to accommodate the BD-LIVE
service.
You can check the available size in BD Data Management. (See page 53)
| NOTE |
When the factory default settings are restored, all stored user BD data will be deleted.
English
HT-E4200_XU_0223.indd 59
59 |
2012-02-24 오전 2:16:43
Appendix
Specifications
Weight
General
FM Tuner
430 (W) x 50 (H) x 250 (D) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
0.5 %
BD (Blu-ray Disc)
Reading Speed : 9.834 m/sec
DVD (Digital Versatile Disc)
Disc
CD : 12cm (COMPACT DISC)
CD : 8cm (COMPACT DISC)
Video Output
Video/Audio
Amplifier
2.5 kg
Dimensions
Composite Video
HDMI
Reading Speed : 6.98 ~ 7.68 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
Blu-ray Disc : 576i/480i
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
165W x 2(3Ω)
Subwoofer speaker output
170W(3Ω)
Frequency response
DVD : 576i/480i
1080p, 1080i, 720p, 576p/480p
Analogue input
20Hz~20kHz (±3dB)
Digital input
20Hz~40kHz (±4dB)
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)500mV
| 60 English
HT-E4200_XU_0223.indd 60
2012-02-24 오전 2:16:44
2.1ch speaker system
Speaker system
3Ω
3Ω
Frequency range
140Hz~20kHz
40Hz ~ 160Hz
Output sound pressure
level
87dB/W/M
88dB/W/M
Rated input
165W
170W
Maximum input
330W
340W
Appendix
Subwoofer
Impedance
07
Front
(Unit : mm)
HT-E4200
Speaker
Dimensions
(W x H x D)
Front
Subwoofer
90 x 139 x 70
168 x 350 x 285
HT-ES4200
Front
Subwoofer
90 x 1050 x 70
* Stand base: 240 x 240
168 x 350 x 285
(Unit : kg)
HT-E4200
Front
Weights
0.36
Subwoofer
2.6
HT-ES4200
•
•
•
•
•
Front
Subwoofer
1.5
2.6
Network speeds equal to or below 10Mbps are not supported.
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
Design and specifications are subject to change without prior notice.
For the power supply and Power Consumption, refer to the label attached to the product.
English
HT-E4200_XU_0223.indd 61
61 |
2012-02-24 오전 2:16:45
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care centre.
Area
` Europe
Albania
Austria
Contact Centre 
42 27 5755
0810 - SAMSUNG (7267864,
€ 0.07/min)
02-201-24-18
Bosnia
Bulgaria
Croatia
05 133 1999
07001 33 11
062 SAMSUNG (062 726 7864)
800-SAMSUNG (800-726786)
Samsung Zrt., česká organizační
složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
70 70 19 70
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG (726-7864
€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
023 207 777
Denmark
Finland
France
Germany
Hungary
Italia
Kosovo
Luxemburg
Macedonia
Area
Montenegro
Belgium
Czech
Web Site
www.samsung.com
www.samsung.com/
be (Dutch)
www.samsung.com/
be_fr (French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Netherlands
Norway
Poland
Portugal
Rumania
Serbia
Slovakia
Spain
Sweden
Switzerland
0848-SAMSUNG (7267864,
CHF 0.08/min)
U.K
Eire
Lithuania
Latvia
Estonia
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
-
Contact Centre 
020 405 888
0900-SAMSUNG (09007267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
/ 022-607-93-33
80820-SAMSUNG (726-7864)
1. 08010 SAMSUNG (72678) doar din reţeaua Romtelecom,
tarif local
2. 021.206.01.10 - din orice
reţea, tarif normal
0700 Samsung (0700 726
7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
Web Site
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
www.samsung.com/
ch_fr/(French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause
harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
AH68-02441A-00
HT-E4200_XU_0223.indd 62
2012-02-24 오전 2:16:47