Philips Micro music system BTD1180/98 User manual

Always there to help you
Register your product and get support at
www.philips.com/support
Question?
Contact
Philips
User manual
BTD1180
1Important2
Safety2
2 Your micro system4
Introduction4
What’s in the box
4
Overview of the main unit
5
Overview of the remote control
6
3Connect8
Place the unit
Connect speakers
Connect video cables
Connect an external audio device
Connect power
8
8
8
9
10
4 Get started11
Prepare the remote control
Set clock
Turn on
Find the correct viewing channel
Select the correct TV system
Change system menu language
Turn on Progressive Scan
11
11
12
12
12
12
13
5Play14
Play from disc
14
Play from USB or recored discs
15
Play a slideshow with background music 15
Resume video play from last stopped
point15
Control play
15
Select tracks16
Play options
16
Change the audio channel
16
Enjoy karaoke
16
Play from Bluetooth-enabled devices
17
6 Listen to the radio19
Tune to a radio station
Program radio stations automatically
Program radio stations manually
Select a preset radio station
19
19
19
19
7 Other features20
Set the alarm timer
Set the sleep timer
Listen to an external device
20
20
20
8 Adjust settings21
General setup
21
Video setup
21
Audio setup
22
Preferences22
9 Product information24
Specifications
Supported disc formats
USB playability information
24
25
25
10Troubleshooting26
11Notice28
Disposal of your old product and
batteries28
EN
1
English
Contents
1Important
•
Unplug this device during lightning storms
or when unused for long periods of time.
•
Refer all servicing to qualified service
personnel. Servicing is required when the
device has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the device, the device has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
•
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
Safety
Important Safety Instructions
•
Follow all instructions.
•
Heed all warnings.
•
Do not use this device near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
•
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce
heat.
•
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the device.
•
Only use attachments/accessories specified
by the manufacturer.
•
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the device.
When a cart is used, use caution when
moving the cart/device combination to
avoid injury from tip-over.
• Install all batteries correctly, + and - as
marked on the unit.
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Batteries (packed or installed) shall not
be exposed to excessive heat such as
sunshine, fire or the like.
• Remove batteries when the unit is not
used for a long time.
•
The device shall not be exposed to
dripping or splashing.
•
Do not place any sources of danger on
the device (e.g. liquid filled objects, lighted
candles).
•
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Risk of overheating! Never install this apparatus
in a confined space. Always leave a space of
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
Caution
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
2
EN
Warning
English
•• Never remove the casing of this device.
•• Never lubricate any part of this device.
•• Never place this device on other electrical equipment.
•• Keep this device away from direct sunlight, naked
flames or heat.
•• Never look into the laser beam inside this device.
•• Ensure that you always have easy access to the power
cord, plug, or adaptor to disconnect this device from
the power.
EN
3
2 Your micro
system
The unit supports these media formats:
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can:
•
watch video from DVD/VCD/SVCD, or
USB storage devices.
•
enjoy audio from discs, Bluetooth-enabled
devices, USB storage devices, or other
external devices.
•
enjoy Karaoke by connecting a
microphone.
•
view pictures from discs or USB storage
devices.
DVD region code
Countries
Asia Pacific
What’s in the box
• listen to FM radio stations.
You can enrich sound output with below
sound effect:
Check and identify the contents of your
package:
•
•
Main unit
•
2 x speakers
•
1 x composite video cable (yellow)
•
Remote control (with two AAA batteries)
•
User manual
Digital Sound Control (DSC)
• DSC 1: Balanced
• DSC 2: Clear
• DSC 3: Powerful
• DSC 4: Warm
• DSC 5: Bright
4
EN
English
Overview of the main unit
k
j
i
a
b
c
h
d
e
g
f
a
(power button/indicator and Bluetooth
indicator)
• Turn the unit on or off.
• Switch to standby mode or Eco
standby mode.
h
• Stop play.
i
• Skip to the previous/next track.
• Press to tune to a radio station.
• Indicate the power/Bluetooth
connection status.
b SOURCE
• Select a source: BT (Bluetooth), DISC,
USB, FM, AUX.
c Display panel
• Show current status.
/
• Press and hold to search for radio
stations automatically.
j VOLUME+/• Adjust volume.
k
• Start, pause, or resume play.
d
• Socket for a USB mass storage device.
e AUDIO-IN
• Connect an external audio player
through a 3.5mm audio input cable
(not supplied).
f Disc compartment
g
• Open/close the disc compartment.
EN
5
e SUBTITLE/PRESET + (
AUDIO/PRESET -( )
Overview of the remote
control
)/
• Navigate through the menu.
• Skip to the previous/next album.
a
b
c
t
d
s
• SUBTITLE (
station.
u
• AUDIO (
): Select a preset radio
): Set the subtitle language.
• Set time.
f
• Return to the previous display menu.
e
r
q
p
o
f
g
h
i
j
k
l
g +/• Adjust volume.
h
/
• Skip to the previous or next title,
chapter, track, or file.
i Numeric buttons
• Select a title/chapter/track to play (See
Select tracks in Chapter 5 for more
details.).
n
m
• Select a preset number.
j MENU
• Access the DISC/USB menu.
a
/STANDBY
• Turn the unit on or off.
• Switch to standby mode or Eco
standby mode.
b
k OPTION
• In DISC/USB play mode, press to
select preferred play options.
l PROG/CLOCK SET
• Program radio stations.
• Access the system menu.
• Set the clock.
c DISPLAY
• View clock information.
• View playback information.
d
/
(
/
m TIME
)
• Navigate through the menu.
• Search within a track/disc/USB.
• Tune to a radio station.
• Set the alarm timer.
n SLEEP
• Set the sleep timer.
o
• Start, pause, or resume play.
6
EN
p
English
• Stop play.
q
• Mute or restore volume.
r SOUND
• Enrich sound effect with Digital Sound
Control (DSC).
s OK
• Confirm a selection.
t SOURCE
• Select a source: BT (Bluetooth), DISC,
USB, FM, AUX.
u EJECT
• Press to open or close the disc
compartment.
EN
7
3Connect
Place the unit
1
2
Hold down the socket flap.
Insert the stripped part of the wire
completely.
• Insert the right speaker wires to “R“,
left speaker wires to “L“.
• Insert the red wires to “+“, black wires
to “-“.
3
1
2
Place the unit near the TV.
Place the left and right speakers at equal
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Connect video cables
You can select the best video connection that
your TV supports.
•
Option 1: Connect through a composite
video (CVBS) cable (for a standard TV).
•
Option 2: Connect through component
video cables (for a standard TV or
Progressive Scan TV).
Note
•• To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
•• Place this unit on top of a table.
•• Never place this unit in an enclosed cabinet.
•• Install this unit near the AC outlet where the AC power
plug can be easily reached.
Release the socket flap.
Option 1: Connect through a
composite video cable
•
Connect the composite video cable
(supplied) to:
• the VIDEO socket on the back of the
unit.
Connect speakers
Note
•• For optimal sound, use the supplied speakers only.
•• Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
8
EN
• the video input socket on the TV.
Connect an external audio
device
English
TV
You can route audio from an external audio
device to this unit.
If the external audio device has analog audio
output sockets (such as your TV):
L
R
LINE OUT
Option 2: Connect through
component video cables
L
Note
R
•• The progressive scan video quality is only available
AUX IN
when a progressive scan TV is connected.
•• If your TV does not support progressive scan, you
cannot view the picture.
•• For how to activate progressive scan on your TV, refer
to the TV user manual.
you can connect a progressive scan TV through
component video for higher quality video.
•
Connect component video cables (green/
red/blue - not supplied) to:
• the component (Y, Pr, and Pb) sockets
on the back of the unit.
• the component input sockets on the
TV.
•
Connect audio cables (red/white - not
supplied) to:
• the AUDIO-IN(L and R) sockets on
the back of the unit.
• the audio output sockets on the
external audio device.
TV
COMPONENT VIDEO INPUT
Y
Pr
Pb
EN
9
If the external audio device has a 3.5mm audio
output socket:
•
Connect the AC power cord to
• the AC MAINS~ socket on the back
of the Bluetooth® speaker.
• the wall power socket.
•
Connect a red/white-to-3.5mm audio
cable (not supplied) to:
• the AUDIO-IN (L and R) sockets on
the back of the unit.
• the headphone socket on the external
audio player.
Connect power
Caution
•• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•• Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•• Before you connect the AC power cord, make sure that
you have completed all other connections.
10
EN
Set clock
Caution
1
In standby mode, press and hold CLOCK
SET on the remote control for more than
two seconds.
»» [24H] or [12H] hour format is
displayed.
2
Press / (or +/-) to select [24H]
or [12H] hour format, and then press
CLOCK SET.
»» The hour digits are displayed and begin
to blink.
3
Press / (or +/-) to set hour, and then
press CLOCK SET.
»» The minute digits are displayed and
begin to blink.
4
Repeat step 3 to set minute.
•• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
•• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•• Risk of decreased battery life! Never mix different
brands or types of batteries.
•• Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Note
•• If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Tip
•• You can view clock information in Eco power mode by
pressing CLOCK SET.
To insert the remote control battery:
1
2
Open the battery compartment.
3
Close the battery compartment.
Insert the supplied AAA batteries with
correct polarity (+/-) as indicated.
a
b
c
EN
11
English
4 Get started
Turn on
•
Tip
Press .
»» The unit switches to the last selected
source.
•• The video-in channel is between the lowest and highest
channels and may be called FRONT, A/V IN, VIDEO etc.
See the TV user manual on how to select the correct
input on the TV.
Switch to standby mode
•
Press again to switch the unit to standby
mode.
»» The clock (if set) is displayed on the
panel.
To switch to ECO standby mode:
•
Press and hold for more than two
seconds.
»» The display panel is dimmed.
Note
Select the correct TV system
Change this setting if the video is not displayed
correctly. By default, this setting matches the
most common setting for TVs in your country.
1
2
Press
3
Select a setting and press OK.
minutes in standby mode.
• [Multi] (Multi) - For TV that is
compatible with both PAL and NTSC.
To switch between standby mode and ECO
standby mode:
Press and hold
seconds.
for more than two
Find the correct viewing
channel
1
Press SOURCE repeatedly to switch to
the disc source.
2
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
• Go to the lowest channel on your TV,
and then press the Channel Down
button until you see the blue screen.
• Press the source button repeatedly on
the remote control of your TV.
12
EN
Select [Setup] (Setup) -> [Video] (Video)
-> [TV System](TV System).
• [PAL] (PAL) - For TV with PAL color
system.
•• The unit switches to Eco Power Standby mode after 15
•
.
• [NTSC] (NTSC) - For TV with NTSC
color system.
4
5
To return to the previous menu, press
To exit the menu, press
.
Change system menu
language
1
2
3
4
Press
.
Select [Setup] (Setup) -> [General]
(General) -> [OSD Language] (OSD
Language), and press OK.
Select a setting and then press OK.
To exit the menu, press
.
.
English
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, make sure that:
•
the TV supports progressive scan signals.
•
you have connected the unit with the TV
through component video.
1
2
Turn on the TV.
3
Switch the TV to the correct viewing
channel for this unit.
4
Press SOURCE repeatedly to switch to
the disc source, and then press .
5
Select [Setup] (Setup) -> [Video] (Video)
-> [Progressive] (Progressive) -> [On]
(on), and then press OK.
»» The progressive setup is complete.
Make sure that the TV progressive scan
mode is deactivated (see the TV user
manual).
EN
13
5Play
Use the disc menu
When you load a DVD/(S)VCD disc, a menu
may be displayed on the TV screen.
Press MENU to access or exit disc menu
manually.
For VCD with PlayBack Control (PBC) feature
(version 2.0 only):
With the PBC feature, you can play VCD
interactively according to the menu screen.
•
Play from disc
Caution
•• Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
•• Never put any objects other than discs into the disc
compartment.
1
Press SOURCE repeatedly to select the
disc source.
2
3
Press
4
Press to close the disc compartment.
»» Play starts automatically.
to open the disc compartment.
Insert a disc with the printed side facing
upward.
•
During play, press MENU to enable/disable
PBC.
»» When PBC is enabled, the menu
screen is displayed.
»» When PBC is disabled, normal play is
resumed.
Select an audio language
•
CD
During disc play, press AUDIO ( ) to
select an audio language for a DVD or
DivX (Home Theater 3.1) video.
»» The language options are displayed.
If the selected audio channel is
unavailable, the default disc audio
channel is used.
Note
•• For some DVDs, the language can only be changed
from the disc menu. Press MENU to access the menu.
If play does not start automatically:
•
Select a title/chapter/track and then press
.
Tip
•• To play a locked DVD, enter the 6-digit parental control
password.
Select a subtitle language
•
During play, press SUBTITLE ( )
repeatedly to select a subtitle language for
a DVD or DivX (Home Theater 3.1) video.
Note
•• For some DVDs, the language can only be changed
from the disc menu. Press MENU to access the disc
menu.
14
EN
Play a slideshow with
background music
You can play DivX (Home Theater 3.1)/MP3/
JPEG picture files copied onto a CD-R/RW,
recordable DVD, or USB storage device.
This device can play MP3 files and JPEG photos
simultaneously.
1
Note
Select a source.
• Press SOURCE repeatedly to select
the disc or USB source.
2
Insert the USB storage device or disc.
»» Play starts automatically.
USB
To play a specified file:
1
2
Press
to stop play.
disc or USB storage device.
1
2
Press
Press
/
to select a file from the folder.
to start play.
Play an MP3 file.
Navigate to the photo folder/album and
press
to start the slideshow.
»» Slideshow begins and continues till the
end of the photo folder or album.
»» Audio continues till the end of the last
file.
•
To return to the previous menu, press
•
To stop the slideshow, press .
.
Resume video play from last
stopped point
Note
Press / to select a folder, and then
press OK to confirm.
• To return to the previous menu, press
.
3
4
•• The MP3 and JPEG files must be stored on the same
•• This feature is only available for CD/DVD/VCD/DivX
play.
•
In stop mode and when the disc has not
been removed, press
.
To stop play completely:
•
In stop mode, press .
Note
•• You can only play DivX (Home Theater 3.1) videos
rented or purchased through the DivX registration
code of this unit.
•• Subtitle files with the following filename extensions (.srt,
.smi, .sub, .ssa, .ass) are supported but do not appear on
the file navigation menu.
•• The subtitle filename has to be the same as the file
name of the video.
Control play
(
/
/
)
/
/
Select a folder.
Fast backward/forward.
Skip to the previous or next title/
chapter/track/file.
EN
15
English
Play from USB or recored
discs
+/(mute)
SOUND
DISPLAY
Pause or resume play.
Stop play.
Increase or decrease volume.
Mute or restore sound.
Enrich sound effect with DSC:
balanced, clear, powerful, warm, and
bright.
View playback information.
Select tracks
1
Press one of any numeric buttons to
activate the track select.
»» The total track numbers display on the
screen.
2
Press three numeric buttons sequentially to
select a track( Total track numbers<999),
or press four numeric buttons sequentially
to select a track ( Total track numbers >
= 1000)
For example: Press 001 to select track 1, or
press 0002 to select track 2.
3
Press OK to confirm.
•
[Microphone] (Microphone): turn on or
off the microphone sound output.
•
[Karaoke Setup](karaoke Setup): set
different volumes of karaoke disc.
•
[Vocal] (Vocal): select various Karaoke
audio modes, or turn off original vocal.
•
[Zoom] (Zoom): during video play, zoom
in/out to pan through the image.
•
[Repeat] (Repeat): choose a repeat play
option or turn off the repeat function.
•
[GOTO] (Goto): during video play, specify
a position to start play by entering the
desired time or number.
•
[Slow Backward] (Slow Backward) &
[Slow Forward] (Slow forward): during
video play, select a slow backward/forward
speed.
Change the audio channel
Note
•• This feature is only available for VCDs and DivX (Home
Theater 3.1) videos.
During play, press AUDIO repeatedly to select
an audio channel available on the disc:
Play options
• [Mono Left] (mono left)
In DISC/USB play mode, press OPTION
(option) to select different play options.
• [Mix-Mono] (mix-mono)
•
[PBC] (PBC): turn PlayBack Control on/off.
•
[Aspect Ratio](Aspect ratio): select a
picture display format to fit the TV screen.
•
[Angle] (Angle): switch between camera
angles.
Note
•• Some DVDs contain alternate scenes, such as scenes
recorded from different camera angles. For such DVDs,
you can select from the available alternate scenes.
16
EN
• [Mono Right] (mono right)
• [Stereo] (stereo)
Enjoy karaoke
You can connect a microphone (not supplied)
to sing along with a music source.
Note
•• Before you connect a microphone, set the microphone
volume to the minimum level to prevent howling.
Insert a Karaoke disc.
3
Press , and then select [Karaoke]
(Karaoke).
4
Turn on the microphone sound output
(see “Adjust karaoke settings“).
5
Play a Karaoke disc and sing along through
the microphone.
Connect a microphone to the MIC IN
socket on the front panel.
Adjust Karaoke settings
•
[Microphone] (Microphone): turn on or
off the microphone sound output.
•
[Mic Volume] (Mic Volume): adjust the
microphone volume.
•
[Echo Level] (Echo Level): adjust echo
level.
•
[Karaoke Scoring] (Karaoke Scoring): turn
off the function of Karaoke scoring or
select a scoring level (basic/intermediate/
advance). If a level is selected, the score is
displayed after each song ends.
•
[Karaoke Idol] (Karaoke Idol): compete
for singing up to 4 songs among different
signers, and the contest result is displayed.
1) In the [Karaoke Scoring] (Karaoke Scoring)
option, select a level (basic/intermediate/
advance).
2) In the [Karaoke Idol] (Karaoke Idol) option,
turn on the contest.
»» The song selection menu is displayed.
3) Input a track (VCD/SVCD) or a title/
chapter (DVD) as the first song. Up to 4 songs
can be selected.
4) Then select [Start] (Start), and press OK to
start play selected songs.
»» After all the selected songs end, a contest result is displayed.
•
•
[Vocal] (Vocal): select various Karaoke
audio modes, or turn off the original vocal.
Play from Bluetooth-enabled
devices
Note
•• The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters (30 feet).
•• Any obstacle between the system and the device can
reduce the operational range.
•• Compatibility with all Bluetooth devices is not
guaranteed.
3
BTD1180
PIN
0000
2
1
Press SOURCE repeatedly to select the
Bluetooth source.
»» [BT] (Bluetooth) is displayed.
»» The power/Bluetooth indicator flashes
blue.
[Key Shift] (Key Shift): adjust the pitch level
that matches your voice.
EN
17
English
1
2
2
On your device that supports A2DP
(Advanced Audio Distribution Profile),
enable Bluetooth and search for Bluetooth
devices that can be paired (refer to the
user manual of the device).
3
Select ‘PHILIPS_BTD1180‘ on your
Bluetooth enabled device and if necessary
input ‘0000’ as the pairing password.
»» After successful pairing and connection,
the power/Bluetooth indicator turns
solid blue, and the unit beeps twice.
4
Play audio on the connected device.
»» Audio streams from your Bluetooth
enabled device to this unit.
Tip
•• The unit can memorize up to 8 previously connected
Bluetooth devices.
To disconnect the Bluetooth-enabled device:
•
Deactivate Bluetooth on your device; or
•
Move the device beyond the
communication range.
To clear Bluetooth pairing history:
•
Pressand hold
on the main set for 3
seconds.
»» The current Bluetooth connection is
disconnected.
»» After successful clearing, [CLEAR]
(clear) is displayed for 3 seconds.
18
EN
Tune to a radio station
Tip
•• Position the antenna as far as possible from TV, VCR, or
other radiation source.
•• For optimal reception, fully extend and adjust the
position of the antenna.
1
Press SOURCE repeatedly to select the
FM source.
2
Press and hold / (
/
) for more
than two seconds.
»» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a weak station:
•
Press / (
/
) repeatedly until
you find optimal reception.
Program radio stations
manually
1
2
English
6 Listen to the
radio
Tune to a radio station.
Press PROG, and then press
select a number from 1–20.
/
to
3
Press PROG to confirm.
»» [SAVE] (save) is displayed.
4
Repeat steps 2-3 to program more
stations.
Note
•• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
•
In tuner mode, press PRESET +/- ( / )
(or press a numeric key directly) to select
a preset radio station.
Program radio stations
automatically
Note
•• You can program a maximum of 20 preset radio
stations (FM).
•
In tuner mode, press and hold PROG
for more than two seconds to activate
automatic programming.
»» [AUTO] (auto) is displayed.
»» All available stations are programmed
in the order of waveband reception
strength, and the first programmed
radio station is broadcast automatically.
EN
19
7 Other features
Set the sleep timer
•
Set the alarm timer
This unit can be used as an alarm clock. You can
select CD, FM, or USB as alarm source.
To set the sleep timer, in power-on mode,
press SLEEP repeatedly to select a set
period of time (in minutes).
»» When the sleep timer is activated,
is displayed.
To deactivate sleep timer:
•
Note
•• Make sure that you have set the clock correctly.
1
2
3
In standby mode, press and hold TIME for
more than two seconds.
»» The hour digits appear and begin to
blink.
Press / (or +/-) repeatedly to set hour,
and then press TIME.
»» The minute digits appear and begin to
blink.
Repeat step 2 to set minute, select a
source (disc, USB, or tuner), and adjust
volume.
Note
•• If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
•
Press TIME repeatedly to activate or
deactivate the alarm.
»» If the timer is activated, is displayed.
Tip
•• If the disc/USB source is selected, but no disc is placed
or no USB connected, the system switches to the tuner
source automatically.
20
EN
Press SLEEP repeatedly until [SLP OFF]
(sleep off) is displayed.
»» When the sleep timer is deactivated,
disappears.
Listen to an external device
You can listen to an external device through this
unit (cable not supplied).
1
Make sure that the external audio device
is connected to this unit (see ‘Connect an
external audio device’ on page 9).
2
Press SOURCE repeatedly to select the
AUX source.
3
Start music play on the external device
(see the user manual of the external
device).
1
2
3
Press
• [Multi] (Multi) - For TV that is
compatible with both PAL and NTSC.
• [NTSC] (NTSC) - For TV with NTSC
color system.
.
Select the [Setup] (Setup) page.
Select a setting and press OK.
• To return to the previous menu, press
.
• To exit the menu, press
[TV Display] (TV Display)
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
.
General setup
On the [General] (general) page, you can set
the following options:
[Disc Lock] (disc lock)
Lock or unlock a disc.
[OSD Language] (OSD language)
Select the preferred language for on-screen
display.
[DivX(R) VOD Code] (DivX(R) VOD Code)
Display the DivX(R) registration code.
Note
•• Enter this DivX registration code when you rent or
purchase a video from http://vod.divx.com/. The DivX
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
4:3 Pan Scan (PS)
On the [Video] (Video) page, you can set the
following options:
[TV System] (TV System)
Change this setting if the video is not displayed
correctly. By default, this setting matches the
most common setting for TVs in your country.
16:9 (Wide Screen)
• [4:3 Pan Scan] (4:3 Pan Scan) – For 4:3
screen TV: full-height display with the
trimmed sides.
• [4:3 Letter Box] (4:3 Letter Box) –
For 4:3 screen TV: wide-screen display
with black bars on the top and bottom
of the screen.
• [16:9] (16:9 Wide Screen) – For widescreen TV: display ratio 16:9.
[Progressive] (Progressive)
Set the video output according to the video
connection. If the composite connection is used,
this setting is not required.
• [On] (On) – turn on progressive scan.
• [Off] (Off) – turn off progressive scan.
[Picture Setting] (Picture Setting)
Select a predefined set of picture color settings.
•
Video setup
4:3 Letter Box (LB)
[Standard] (Standard) – Original color
setting.
•
[Bright] (Bright) – Vibrant color setting.
•
[Soft] (Soft) - Soft color setting.
•
[Personal] (Personal) – Customizes the
color setting. Set the level of brightness,
contrast, tint, and color saturation, and then
press OK.
• [PAL] (PAL) - For TV with PAL color
system.
EN
21
English
8 Adjust settings
Audio setup
On the [Audio] (Audio) page, you can set the
following options:
[Surround Mode] (Surround Mode)
• [Stereo] (Stereo)
• [LT/RT] (left/right)
[Sound Mode] (Sound Mode)
Turn off or select your preferred sound mode.
• [3D] (3D)
• [Movie Mode] (Movie Mode)
• [Music Mode] (Music Mode)
[Night Mode] (Night Mode)
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
• [On] (On) – enjoy quiet viewing at
night (DVDs only).
• [Off] (Off) – enjoy surround sound
with its full dynamic range.
Preferences
On the [Preference] (Preference) page, you can
set the following options:
[Audio] (Audio)
Select the preferred audio language for disc play.
[Subtitle] (Subtitle)
Select the preferred subtitle language for disc
play.
[Disc Menu] (Disc Menu)
Select the preferred disc menu language.
Note
[Parental Control] (Parental Control)
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
1) Press OK.
2) Select a rating level, and then press OK.
3) Press the numeric keys to enter the
password.
Note
•• Rated discs above the level you set in [Parental
Control] (Parental Control) require a password to be
played.
•• The ratings are country-dependent. To allow all discs to
play, select [8 Adult] (8 Adult).
•• Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
[PBC] (PBC)
Play VCD interactively according to the menu
screen.
• [On] (On): the menu screen is
displayed.
• [Off] (Off): normal play is resumed.
[Password] (Password)
This setting allows you to change the password
for parental control. The default password is
000000.
1) Press the numeric keys to enter '000000'
or your last set password at [Old Password]
(Old Password) field.
2) Enter the new password at [New
Password] (New Password) field.
3) Enter the new password again at [Confirm
PWD] (Confirm PWD) field.
4) Press OK to exit the menu.
•• If the language you have set is not available on the disc,
the disc uses its own default language.
•• For some discs, the subtitle/audio language can only be
changed from the disc menu.
Note
•• If you forget the password, enter '000000' before you
set a new password.
22
EN
English
[DivX Subtitle] (DivX Subtitle)
Select a character set that supports the DivX
subtitle.
Note
•• Ensure that the subtitle file has the exact same file
name as the movie file. If for example the file name of
the movie is ‘Movie.avi’, and then you will need to name
the text file ‘Movie.sub’ or ‘Movie.srt’.
[Version Info] (Version Information)
Display the software version of this device.
[Default] (Default)
Reset all the settings to factory default, except
for the password and parental settings.
EN
23
9Product
information
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
Search Selectivity
Total Harmonic Distortion
Signal to Noise Ratio
Note
<22 dBf
<45 dBf
<30 dBf
<3%
>45 dB
•• Product information is subject to change without prior
notice.
USB
USB Direct Version
USB 5 V Power
Specifications
Disc
Amplifier
Maximum Output Power
Frequency Response
Signal to Noise Ratio
Total Harmonic Distortion
Aux Input
20 W
60 Hz - 16
kHZ; ±3 dB
≥70 dB
<1%
600 mV RMS
Speakers
Speaker Impedance
Speaker Driver
Sensitivity
6 ohm
3.5" full range
speaker
>84 dB/m/W
Bluetooth
Bluetooth version
Frequency band
Range
V2.1 + EDR
2.4GHz ~ 2.48GHz ISM
Band
10m (free space)
Tuner (FM)
Tuning Range
Tuning grid
24
EN
2.0 full speed
≤500 mA
87.5-108
MHz
50 KHz
Laser Type
Disc Diameter
Video Decoding
Video DAC
Signal System
Video Format
Video S/N
Audio DAC
Total Harmonic
Distortion
Frequency Response
Frequency Response
S/N Ratio
Semiconductor
12 cm/8 cm
MPEG-1 / MPEG-2 /
DivX
12 Bits
PAL / NTSC
4:3 / 16:9
>57 dB
24 Bits / 96 kHz
<1% (1 kHz)
4 Hz - 20 kHz (44.1
kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 24 kHz (96 kHz)
60 Hz - 16 kHZ; ±3 dB
>70 dBA
General information
AC power
Operation Power
Consumption
Eco Standby Power
Consumption
100-240 V,
50/60 Hz
20 W
<0.5 W
- Speaker Box (W x H x D)
Weight
- Main Unit
- Speaker Box
180 x 121 x
239 mm
120 x 170 x
160 mm
1.6 kg
2 x 1.2 kg
Supported disc formats
USB playability information
English
Dimensions
- Main Unit (W x H x D)
Compatible USB devices:
• USB flash memory (USB2.0 or
USB1.1)
• USB flash players (USB2.0 or USB1.1)
• memory cards (requires an additional
card reader to work with this unit)
Supported formats:
• USB or memory file format: FAT12,
FAT16, FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
•
Digital Video Discs (DVDs)
•
Video CDs (VCDs)
•
Super Video CDs (SVCDs)
• Directory nesting up to a maximum of
8 levels
•
Digital Video Discs + Rewritable
(DVD+RW)
• Number of albums/ folders: maximum
99
•
Compact Discs (CDs)
• Number of tracks/titles: maximum 999
•
Picture (Kodak, JPEG) files on CDR(W)
• ID3 tag v2.0 or later
•
DivX(R) disc on CD-R(W):
• DivX 3.11, 4.x and 5.x
Supported MP3-CD formats:
•
ISO 9660
•
Max. title/album name: 12 characters
•
Max. title number plus album: 255.
•
Max. nested directory: 8 levels.
•
Max. album number: 32.
•
Max. MP3 track number: 999.
•
Supported sampling frequencies for MP3
disc: 32 kHz, 44.1 kHz, 48 kHz.
•
Supported Bit-rates of MP3 disc are: 32, 64,
96, 128, 192, 256 (kbps).
•
The following formats are not supported:
• File name in Unicode UTF8 (maximum
length: 32 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMA files, and will not be shown in
the display.
• Unsupported file formats are skipped.
For example, word documents (.doc)
or MP3 files with extension .dlf are
ignored and not played.
• WMA, AAC, WAV, PCM audio files
• DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
• WMA files in Lossless format
• Files like *.VMA, *.AAC, *.DLF, *.M3U,
• *.PLS, *.WAV
• Non-English Album/Title name
• Discs recorded in Joliet format
• MP3 Pro and MP3 with ID3 tag
EN
25
10Troubleshooting
Warning
•• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
•• Make sure that the AC power cord of the
device is connected properly.
•• Make sure that there is power at the AC
outlet.
•• As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•• Adjust the volume.
•• Check that the speakers are connected
correctly.
•• Check if the stripped speaker wires are
clamped.
Remote control does not work
•• Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•• Reduce the distance between the remote
control and the unit.
•• Insert the battery with its polarities (+/–
signs) aligned as indicated.
•• Replace the battery.
•• Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
•• Insert a disc.
26
EN
••
••
••
••
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.
Use a finalized CD or correct format disc.
Disc does not play
•• Insert a readable disc with the label side
facing up.
•• Check the disc type, color system and
regional code. Check for any scratches or
smudges on the disc.
•• Press to exit the system setup menu.
•• Disable the password for parental control
or change the rating level.
•• Moisture has condensed inside the system.
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
No picture
•• Check the video connection.
•• Turn on the TV to the correct Video-In
channel.
•• Progressive scan is activated but the TV
does not support progressive scan.
Black and white or distorted picture
•• The disc does not match the TV color
system standard (PAL/NTSC).
•• Sometimes a slight picture distortion may
appear. This is not a malfunction.
•• Clean the disc.
•• A distorted picture may appear during
progressive scan setup.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
•• The aspect ratio is fixed on the loaded
DVD disc.
•• The aspect ratio may not be changed for
some TV systems.
DivX video files cannot be played.
•• Ensure that the DivX video file is
complete.
•• Ensure that the file extension is correct.
Due to Digital Rights issue, the DRMprotected video files cannot be played
through an analog video connection (e.g.
composite, component and scart). Transfer
the video content onto the Disc Media
and play these files.
Audio or subtitle languages cannot be set
•• The disc is not recorded with sound or
subtitles in multiple languages.
•• The audio or subtitle language setting is
prohibited on the disc.
Cannot display some files in USB device
•• The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
•• The formats of these files are not
supported.
USB device not supported
•• The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•• Increase the distance between the
apparatus and your TV or VCR.
•• Fully extend the FM antenna.
•• Connect an outdoor FM antenna instead.
••
This unit is already connected with another
Bluetooth-enabled device. Disconnect that
device and then try again.
The paired mobile device connects and
disconnects constantly.
•• The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
•• Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of this unit.
•• For some devices, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
this unit.
Timer does not work
•• Set the clock correctly.
•• Switch on the timer.
Clock/timer setting erased
•• Power has been interrupted or the power
cord has been disconnected.
•• Reset the clock/timer.
Music playback is unavailable on this unit even
after successful Bluetooth connection.
•• The device cannot be used to play music
through this unit wirelessly.
The audio quality is poor after connection
with a Bluetooth-enabled device.
•• The Bluetooth reception is poor. Move the
device closer to this unit or remove any
obstacle between them.
Cannot connect with this unit.
•• The device does not support the profiles
required for this unit.
•• The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to find out how to enable the
function.
•• This unit is not in pairing mode.
EN
27
English
••
11Notice
Any changes or modifications made to this
device that are not expressly approved by
Gibson Innovations may void the user’s
authority to operate the equipment.
Specifications are subject to change without
notice. Gibson reserves the right to change
products at any time without being obliged to
adjust earlier supplies accordingly.
Disposal of your old product
and batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for
additional information on a recycling center in
your area.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
28
EN
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Philips and the Philips’ Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
and are used by Gibson Innovations Limited
under license from Koninklijke Philips N.V.”
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Gibson
Innovations is under license.
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit
divx.com for more information and software
tools to convert your files into DivX videos.
English
ABOUT DIVX VIDEO-ON-DEMAND: This
DivX Certified® device must be registered
in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
This apparatus includes this label:
Note
•• The type plate is located on the back of the device.
EN
29
2015 © Gibson Innovations Limited. All rights reserved.
This product has been manufactured by, and is sold under
the responsibility of Gibson Innovations Ltd., and Gibson
Innovations Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used under
license from Koninklijke Philips N.V.
BTD1180_98_UM_V6.0