Philips DVD/SACD home theater system LX3900SA/75 Quick start guide

LX3900SA
12nc: 3139 115 23301
First connect ...
Pr/Cr
Front R
Front L
b b
P /C
Y
Scart cable
A
C
Centre
MW loop
antenna
D
FM antenna
B
F
E
FM/MW ANTENNA
VIDEO OUT
AUDIO
Y
CVBS
L
FM 75
MW
~AC
MAINS
FRONT CENTER FRONT
RIGHT
LEFT
REAR
LEFT
REAR
RIGHT
SUBW
R
SPEAKERS (4 )
TV IN
AUX IN LINE OUT DIGITAL
IN
Pr
Pb
S-VIDEO
G
J
Rear R
H
Subwoofer
Rear L
Helpful Hints
To obtain a better picture quality effect, you can
choose to connect an extra video connection if
your TV has the same input connector: A or B.
H
G
C
B
A
J
Use this video
cable (not supplied)
If your TV has
this video input jack(s)
A
COMPONENT VIDEO IN
B
S-VIDEO
IN
If your TV has only
a single Antenna In
jack, you will need an
ANTENNA IN
accessory RF
modulator. The RF modulator
converts the video from the
DVD system so it can play
through the TV’s Antenna
connector. Refer to your
owner’s manual for proper
connection (refer to page 9 in
the owner’s manual).
When listening to TV programmes, press TV button on the remote to
set the DVD system to TV mode in order for the sound to be heard.
For connecting to a VCR, see page 11 in the owner’s manual for more
details.
... then play
(see next page)
LX3900-75 QUG-Eng1
1
08/04/2004, 11:48 AM
4
Playing a disc
ALL
SUPER VIDEO
Make sure your DVD system and
TV are connected and turned on!
1
Press DISC on the remote control.
You can also press the SOURCE button on the front
panel until “DISC” appears on the display panel.
2
Turn on the TV and select the correct Video
In mode.
You should see the blue DVD background screen on the
TV (if no disc in the DVD system).
3
Press OPEN•CLOSE 0 on the front of the
DVD system and load a disc, then press
OPEN•CLOSE 0 again to close the disc
tray.
Make sure the disc label is facing up. For double-sided
discs, load the side you want to play face up.
4
5
No picture?
Check the AV (Audio/Video) mode
on your TV.
*
*
*
Playback will start automatically.
If a disc menu appears, use 3 4 1 2 buttons on the
remote to make the necessary selection, then press OK
to confirm. Or, use the numeric keypad on the remote to
select features. Follow the instructions given in the disc
menu.
*
*
Usually this channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, or VIDEO.
Or, you may go to channel 1 on your TV,
then press the Channel down button
repeatedly until you see the Video In
channel.
Or, your TV remote control may have a
button or switch that chooses different
video modes.
Do not use channel 3 or 4 on the TV
unless you are using an RF modulator.
See your TV manual for more details.
To stop playback, press STOPÇ.
Using the DVD setup menu
2
- - GENERAL SETUP PAGE - DISC LOCK
DISPLAY DIM
PROGRAM
OSD LANGUAGE
SCREEN SAVER
- - AUDIO SETUP PAGE - ANALOG OUTPUT
SPEAKER SETUP
NIGHT MODE
- - VIDEO SETUP PAGE - TV TYPE
TV DISPLAY
PICTURE SETTING
COMPONENT
PROGRESSIVE
- - PREFERENCE PAGE - AUDIO
SUBTITLE
DISC MENU
PARENTAL
PBC
MP3/JPEG NAV
PASSWORD
DEFAULT
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
LX3900-75 QUG-Eng1
2
08/04/2004, 11:48 AM