advertisement
▼
Scroll to page 2
of
184
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Country U.S.A CANADA Customer Care Center Web Site 1-800-SAMSUNG(726-7864) www.samsung.com/us 1-800-SAMSUNG(726-7864) www.samsung.com/ca Address Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada Plasma TV user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model Serial No. BN68-02269A BN68-02269A-00 BN68-02269A_Eng.indb 1 2009-03-31 오후 5:09:50 Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty. © 2009 Samsung Electronics Co., Ltd. All rights reserved. English - BN68-02269A_Eng.indb 2 2009-03-31 오후 5:09:50 User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 26 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. Altitude The PDP can only operate normally at heights under 6500ft. Heat on the top of the Plasma TV The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product. The product is making a ‘cracking’ noise. A ‘cracking’ noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit. Cell Defects The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. Avoid operating the TV at temperatures below 41°F (5°C) A still image displayed too long may cause permanent damage to the PDP Panel. Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen. Damages caused by the above effect are not covered by the Warranty. After-images on the Screen. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. English - BN68-02269A_Eng.indb 3 2009-03-31 오후 5:09:50 English Contents Connecting and Preparing Your TV ■ ■ ■ ■ ■ ■ List of Features........................................................................... 5 Checking Parts........................................................................... 5 Assembling the Cables............................................................... 5 Viewing the Control Panel.......................................................... 6 Viewing the Connection Panel................................................... 7 Remote Control.......................................................................... 8 Connections ■ Connecting VHF and UHF Antennas.......................................... 9 ■ Connecting Cable TV................................................................. 9 ■ Connecting a DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI.............................................. 11 ■ Connecting a DVD /Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) via DVI................................................. 11 ■ Connecting a DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables......................... 12 ■ Connecting a Camcorder......................................................... 12 ■ Connecting a VCR.................................................................... 13 ■ Connecting a Digital Audio System.......................................... 14 ■ Connecting an Amplifier / DVD Home Theater......................... 14 ■ Connecting a PC...................................................................... 15 Operation ■ ■ ■ ■ ■ ■ ■ ■ Turning the TV On and Off....................................................... 16 Changing Channels.................................................................. 16 Adjusting the Volume................................................................ 16 Using the TOOLS Button.......................................................... 17 Using the Remote Control Backlight Buttons........................... 17 Viewing the Display.................................................................. 17 Viewing the Menus................................................................... 18 Plug & Play Feature................................................................. 19 Channel Control ■ Storing Channels . ................................................................... 20 ■ Managing Channels................................................................. 21 Picture Control ■ Changing the Picture Settings.................................................. 23 PC Display ■ Using Your TV as a Computer (PC) Display............................. 27 ■ Display Modes.......................................................................... 27 ■ Setting up the TV with your PC................................................ 28 Sound Control ■ Changing the Sound Settings................................................... 29 Function Description ■ ■ ■ ■ ■ Configuring the Setup Menu..................................................... 30 Viewing the Picture in Picture (PIP)......................................... 33 Setting the Time....................................................................... 34 Source List / Edit Name............................................................ 35 Support..................................................................................... 36 Media Play ■ Connecting a USB Device........................................................ 38 ■ Using the Media Play Function................................................. 39 Symbol Press ■ ■ ■ ■ ■ ■ ■ ■ Using and Sorting Photo List.................................................... 40 Viewing a Photo or Slide Show ............................................... 41 Using and Sorting the Music List.............................................. 43 Playing a Music ....................................................................... 44 Using and Sorting the Movie List.............................................. 45 Playing a Movie File ................................................................ 46 Picture / Music Settings Using Media Play............................... 48 Using the Setup Menu.............................................................. 49 Media Play-DLNA ■ ■ ■ ■ Setting the DLNA Network........................................................ 50 Installing the DLNA Application................................................ 50 Using the DLNA Application..................................................... 52 Using the DLNA Function......................................................... 55 Anynet+ ■ ■ ■ ■ ■ ■ Connecting Anynet+ Devices................................................... 56 Setting Up Anynet+ .................................................................. 57 Switching between Anynet+ Devices........................................ 57 Recording................................................................................. 58 Listening through a Receiver.................................................... 59 Troubleshooting for Anynet+ .................................................... 59 Content Library ■ Activating the Content Library.................................................. 60 ■ Using the Content Library......................................................... 61 Network ■ Network Connection................................................................. 62 ■ Network Setup.......................................................................... 65 Internet@TV ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Getting Started with Internet@TV............................................ 69 Editing Snippets in the Dock.................................................... 71 Using the Profile Widget........................................................... 71 Using the Yahoo!® Widget Gallery........................................... 73 Using the Yahoo!® Weather Widget......................................... 74 Using the Yahoo!® News Widget............................................. 74 Using the Yahoo!® Flickr Widget.............................................. 75 Using the Yahoo!® Finance Widget......................................... 76 Troubleshooting for internet@TV ............................................ 76 Help Website............................................................................ 77 Home Network Center ■ ■ ■ ■ Home Network Center.............................................................. 78 Setting Up the Home Network Center...................................... 79 Using the Message Function.................................................... 80 Using the Media Function......................................................... 81 Appendix ■ ■ ■ ■ ■ ■ ■ ■ Troubleshooting........................................................................ 82 Preparation before installing the Wall-Mount............................ 83 How to attach the Stand-Base.................................................. 83 Securing the TV to the Wall...................................................... 84 Wall Mount Kit Specifications (VESA)...................................... 85 Specifications........................................................................... 86 Dimensions (PN50B650S1F)................................................... 87 Dimensions (PN58B650S1F)................................................... 88 N O T Note One-Touch Button TOOLS English - BN68-02269A_Eng.indb 4 2009-03-31 오후 5:09:50 Connecting and Preparing Your TV List of Features • • • • • • • • • • • Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. V-Chip function. Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed. HDMI/DVI connection of your PC to this TV. Excellent Picture Quality SRS TruSurround HD provides a virtual surround system. Media Play: Allows you to play music files, pictures, and movies saved on a USB or DLNA device. Internet@TV: You can use various internet services and view useful information and entertaining content. Home Network Center: Allows you to configure a mobile message server or a DLNA media render. Checking Parts Please make sure the following items are included with your TV. If any items are missing, contact your dealer. N The items' color and shape may vary depending on the model. Remote Control (BN59-00854A) / AAA Batteries (4301-000103) Program CD Power Cord (3903-000144) Ferrite Core for Power Cord (3301-001305) Owner’s Instructions / Warranty Card / Quick Setup Guide Safety Guide Manual (BN68-01923A) (Not available in all locations) Ferrite Core for Side-AV (3301-001201) (PN58B650S1F only) Cleaning Cloth (BN63-01798B) Cover-Bottom Cover-Bottom / Screw (2ea) (Refer to page 83) (Refer to page 83) (PN50B650S1F only) (PN58B650S1F only) Holder-Wire Cable TV-Holder / Screw (BN96-10788A) (Refer to page 84) Holder-Ring (4ea) Screw (4ea) (Refer to page 83) (PN50B650S1F only) N Ferrite Core The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug. Power Cord Audio Cable / Video Cable (PN58B650S1F only) Assembling the Cables Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand. English - BN68-02269A_Eng.indb 5 2009-03-31 오후 5:09:52 Viewing the Control Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. N The product color and shape may vary depending on the model. N The front panel buttons can be activated by touching them with your finger. 1 SOURCEE Toggles between all the available input sources (TV, AV1, AV2, Component1, Conponent2, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB). N In the on-screen menu, use this button as you use the ENTERE button on the remote control. 2 MENU Press to see an on-screen menu of your TV’s features. 3 + VOL – Press to increase or decrease the volume. In the on-screen menu, use the + VOL – buttons as you would use the ◄ and ► buttons on the remote control. 4 < CH > Press to change channels. In the on-screen menu, use the < CH > buttons as you would use the ▲ and ▼ buttons on the remote control. 5 POWER INDICATOR Blinks and turns off when the power is on and lights up in stand-by mode. 6 P (POWER) Press to turn the TV on and off. 7 REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV. 8 SPEAKERS English - BN68-02269A_Eng.indb 6 2009-03-31 오후 5:09:52 Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as Blu-ray/DVD players or a VCR. N The product color and shape may vary depending on the model. TV Rear Panel TV Side Panel 1 POWER IN Connects the supplied power cord. 7 ANT IN Uses a 75Ω Coaxial connector for an Air/Cable Network. 2 LAN Connect a LAN cable to this port to connect to the Network(Internet@TV). 8 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 9 COMPONENT IN 1, 2 / AV IN 1 Connects Component video / audio. The COMPONENT IN 1 jack is also used as the AV IN 1 jack. 3 AUDIO OUT (R/L) Audio outputs to external devices. N Connect the video cable to the COMPONENT IN 1 4 PC IN [PC] / [AUDIO] Connects to the video and audio output jacks on your PC. N If your PC supports an HDMI connection, you can [Y/VIDEO] jack and the audio cable to the COMPONENT IN 1 [R-AUDIO-L] jacks. connect this to the HDMI IN 1, 2, 3, or 4 terminal. 0 EX-LINK Used for service only. this to the HDMI IN 2 / DVI AUDIO IN [R-AUDIO-L] terminal. ! USB 1(HDD) / USB 2 Connect a USB mass storage device to view photo files and play audio files. N If your PC supports a DVI connection, you can connect 5 DVI AUDIO IN (AUDIO-R/L) Connect to the DVI audio output jack of an external device. 6 HDMI IN 1, 2(DVI), 3, 4 Connect to the HDMI jack of a device with an HDMI output. N Use an HDMI cable which is smaller than 14.4mm. N What is HDMI? N The USB 1 port is also used as the HDD. HDD (Hard disk drive) is device which stores digitally encoded data. @ AV IN 2 Video and audio inputs for external devices. • HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals using a single cable. • The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed. • We recommend that 14.4mm is proper for cable size. This is smaller than standard. English - BN68-02269A_Eng.indb 7 2009-03-31 오후 5:09:53 Remote Control You can use the remote control up to a distance of about 23 feet from the TV. N The product color and shape may vary depending on the model. N The performance of the remote control may be affected by bright light. 1 POWER Turns the TV on and off. 2 TV Selects the TV mode directly. 3 NUMERIC BUTTONS Press to change the channel. 4 $ INFO Press to display information on the TV screen. % Use these buttons in the DMA, Media Play and Anynet+ modes. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature) Press to select additional channels (digital ON/OFF ^ and analog) being broadcast by the same Press to backlight the buttons on the remote. station. For example, to select channel This function is convenient for using at night “54-3”, press “54”, then press “ ” and “3”. or when the room is dark. (Using the remote 5 MMUTE control with the ON/OFF( ) light button set to On will reduce the battery usage time.) Press to temporarily cut off the sound. 6 VOL Press to increase or decrease the volume. 7 SOURCE Press to display and select the available video sources. 8 CH LIST Used to display Channel Lists on the screen. 9 TOOLS Use to quickly select frequently used functions. P▲ / DOWN▼ / LEFT◄ / 0 U RIGHT► / ENTER Use to select on-screen menu items and change menu values. ! INTERNET@ This function enables you to view Internet@TV. @ COLOR BUTTONS Use these buttons in the Channel list, Media Play, and Internet@TV, etc. # MEDIA.P (Media play) This function enables you to view and play photo and music files from an external device. (Refer to pages 40 (Photo), 43 (Music) and 45 (Movie)) & PRE-CH Tunes to the previous channel. * CH Press to change channels. ( MENU Displays the on-screen menu. ) FAV.CH Press to switch to your favorite channels. a RETURN Returns to the previous menu. b EXIT Press to exit the menu. c P.SIZE Picture size selection. d CONTENT This function enables you to view Content Library. e CC Controls the caption decoder. f MTS Press to choose stereo, mono or Separate Audio Program (SAP broadcast). ❑ Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. N Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Close the cover as shown in the figure. N Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. (Assuming typical TV usage, the batteries should last for about one year.) N Using the remote control with the ON/OFF( ) light button set to On will reduce the battery usage time. N If the remote control doesn’t work, check the following 1. 2. 3. 4. 5. Is the TV power on? Are the plus and minus ends of the batteries reversed? Are the batteries drained? Is there a power outage or is the power cord unplugged? Is there a special fluorescent light or neon sign nearby? English - BN68-02269A_Eng.indb 8 2009-03-31 오후 5:09:54 Connections Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat Twin Leads” below. If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round Leads”. If you have two antennas, see “Separate VHF and UHF Antennas”. ❑ Antennas with 300 Ω Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or rabbit ears) that has 300 Ω twin flat leads, follow the directions below. 1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied). Use a screwdriver to tighten the screws. 2. Plug the adaptor into the ANT IN terminal on the back of the TV. ANT IN ❑ Antennas with 75 Ω Round Leads ANT IN Plug the antenna lead into the ANT IN terminal on the back of the TV. ❑ Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1. Connect both antenna leads to the combiner. 2. Plug the combiner into the ANT IN terminal on the bottom of the back panel. UHF VHF ANT IN UHF VHF Connecting Cable TV To connect to a cable TV system, follow the instructions below. ❑ Cable without a Cable Box Plug the incoming cable into the ANT IN terminal on the back of the TV. ANT IN N Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels. ❑ Connecting to a Cable Box that Descrambles All Channels 1. Find the cable that is connected to the ANT OUT terminal on your cable box. N This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”. ANT IN ANT OUT 2. Connect the other end of this cable to the ANT IN terminal on the back of the TV. ANT IN Continued... English - BN68-02269A_Eng.indb 9 2009-03-31 오후 5:09:55 ❑ Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.) 1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. N This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”. ANT IN 2. Connect this cable to a two-way splitter. Incoming cable 3. Connect an Antenna cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box. Splitter IN Incoming cable CABLE OUT Splitter Cable Box 4. Connect an Antenna cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch. A Incoming cable IN B CABLE OUT Splitter RF (A/B) Switch Cable Box 5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch. A Incoming cable IN CABLE OUT Splitter Cable Box 6. Connect the last Antenna cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV. A Incoming cable IN Splitter CABLE OUT B RF (A/B) Switch TV Rear B ANT IN RF (A/B) Switch After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.) English - 10 BN68-02269A_Eng.indb 10 2009-03-31 오후 5:09:56 Connecting a DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1. Connect an HDMI Cable between the HDMI IN (1, 2(DVI), 3, or 4) jack on the TV and the HDMI jack on the DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box). TV Rear Panel DVD/Blu-ray Player or Cable Box / Satellite receiver TV Side Panel or 1 HDMI Cable (Not supplied) N What is HDMI? • HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video signals using a single cable. • The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed. N Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. N The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray Player or Cable Box / Satellite receiver supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2(DVI) jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray��������������������������������������������� Player or Cable Box / Satellite������������� receiver to confirm the HDMI version, then request an upgrade. N HDMI cables that are not 1.3 may cause annoying flicker or no screen display. Connecting a DVD /Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) via DVI This connection can only be made if there is a DVI Output jack on the external device. 1. Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the HDMI IN 2(DVI) jack on the TV and the DVI jack on the DVD / Blu-ray Player or Cable Box/Satellite receiver (Set-Top Box). 2. Connect Audio Cables between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the DVD/Blu-ray Player or Cable Box / Satellite receiver. TV Rear Panel DVD/Blu-ray Player or Cable Box / Satellite receiver 2 Audio Cable (Not supplied) 1 HDMI/DVI Cable (Not supplied) N Each DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. N When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable. N When using an HDMI / DVI cable connection, you must use the HDMI IN 2(DVI) jack. English - 11 BN68-02269A_Eng.indb 11 2009-03-31 오후 5:09:57 Connecting a DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD/Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) to your TV. 1.������������������������������������ Connect Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD / Blu-ray Player or Cable Box / Satellite receiver(Set-Top Box). 2. Connect Audio Cables between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box). TV Rear Panel DVD / Blu-ray Player or Cable Box / Satellite receiver 2 Audio Cable (Not supplied) 1 Component Cable (Not supplied) N Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red) for enhanced video quality. Be sure to match the compon������������������������������������������������������������������������������������������������������� ent video and audio connections. For example, if connecting the video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also. N Each DVD / Blu-ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration. N When connecting a DVD / Blu-ray Player or Cable Box / Satellite receiver����������������������������������������������������������� (Set-Top Box), match the color of the connection terminal to the cable. Connecting a Camcorder The side and rear panel jacks on your TV make it easy to connect a camcorder to your TV. ❑ Using an Video / Audio Cable 1. Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder. 2. Connect Audio Cables between the AV IN 2 [L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks on the Camcorder. N Each Camcorder has a different back panel configuration. TV Side Panel Camcorder 1 Video Cable (Not supplied) 2 Audio Cable (Not supplied) N When connecting a Camcorder, match the color of the connection terminal to the cable. English - 12 BN68-02269A_Eng.indb 12 2009-03-31 오후 5:09:58 ❑ Using an HDMI Cable 1. Connect an HDMI Cable between the HDMI IN (1, 2(DVI), 3, or 4) jack on the TV and the HDMI jack on the camcorder. TV Rear Panel TV Side Panel Camcorder 1 HDMI Cable (Not supplied) or N Each Camcorder has a different back panel configuration. Connecting a VCR ❑ Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back of the TV. 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV. 4. Connect a Video Cable between the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the VCR. 5. Connect Audio Cables between the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR TV Rear Panel TV Side Panel VCR Rear Panel 2 5 Audio Cable(Not supplied) 4 Video Cable(Not supplied) 3 Antenna cable(Not supplied) N If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables. N Each VCR has a different back panel configuration. N When connecting a VCR, match the color of the connection terminal to the cable. N When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow). English - 13 BN68-02269A_Eng.indb 13 2009-03-31 오후 5:09:59 Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV. 1. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack : Decrease the volume of the TV, and adjust the volume level with the system’s volume control. TV Rear Panel Digital Audio System Optical Cable (Not supplied) N 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH. N Each Digital Audio System has a different back panel configuration. N When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Blu-ray player or Cable/ Satellite Box directly to an Amplifier or Home Theater, not the TV. Connecting an Amplifier / DVD Home Theater 1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [L-AUDIO-R] jacks on the Amplifier/ DVD Home Theater. When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks terminals : Decrease the volume of the TV, and adjust the volume level with the Amplifier’s volume control. TV Rear Panel Amplifier / DVD Home Theater Audio Cable (Not supplied) N Each Amplifier / DVD Home Theater has a different back panel configuration. N When connecting an Amplifier / DVD Home Theater, match the color of the connection terminal to the cable. English - 14 BN68-02269A_Eng.indb 14 2009-03-31 오후 5:10:00 Connecting a PC ❑ Using a D-Sub Cable 1. Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer. 2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. TV Rear Panel PC 2 PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) ❑ Using an HDMI/DVI Cable 1. Connect an HDMI/DVI cable between the HDMI IN 2(DVI) jack on the TV and the PC output jack on your computer. 2. Connect a 3.5 mm Stereo plug to 2RCA cable between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer. TV Rear Panel PC 2 3.5 mm Stereo plug to 2 RCA Cable (Not supplied) 1 HDMI/DVI Cable (Not supplied) N Each PC has a different back panel configuration. N When connecting a PC, match the color of the connection terminal to the cable. N When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal. English - 15 BN68-02269A_Eng.indb 15 2009-03-31 오후 5:10:02 Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. N It may take a while for your TV to power on. Changing Channels ❑ Using the Channel Buttons Press the CH or CH button to change channels. or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 20 to memorize channels. N When you press the CH ❑ Using the Number Buttons Press the number buttons to go directly to a channel. For example, to select channel “27”, press “2”, then “7”. N For quick channel change, press the number buttons, then press the ENTERE button. ❑ Using the “ ” Button The “ ” button is used to select stations that broadcast a digital signal. For example, for Channel "7-1", press "7", then " ”�������� , then "1". N For quick channel change, press the number buttons, then press the ENTERE button. ❑ Using the PRE-CH Button to select the Previous Channel Use the number buttons to quickly tune to any channel. Press the PRE-CH button. The TV will switch to the last channel viewed. N To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them. Adjusting the Volume ❑ Using the Volume Buttons Press the VOL or VOL button to increase or decrease the volume. ❑ Using the Mute Button At any time, you can cut off the sound using the MMUTE button. 1. Press MMUTE button and the sound cuts off. will displayed on the screen. 2. To turn mute off, press the MMUTE button again, or simply press the VOL VOL button. or English - 16 BN68-02269A_Eng.indb 16 2009-03-31 오후 5:10:03 Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on which external input mode you are viewing. 1. Press the TOOLS button. The Tools menu will appear. 2. Press the ▲/▼ button to select a menu, then press the ENTERE button. 3. Press the ▲/▼/◄/►/ENTERE buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page. • • • • • • • • • Anynet+ (HDMI-CEC), see page 57 Picture Mode, see page 23 Sound Mode, see page 29 Sleep Timer, see page 34 SRS TS HD, see page 29 Add to Favorite (or Delete from Favorite), see page 21 Switch to Cable (or Air), see page 20 PIP, see page 33 Auto Adjustment, see page 28 Tools Anynet+ (HDMI-CEC) Picture Mode Sound Mode Sleep Timer SRS TS HD Add to Favorite Switch to Cable : Standard : Custom : Off : Off U Move E Enter e Exit Using the Remote Control Backlight Buttons Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly. 1. Press the ON/OFF( ) light button N When ON, the button backlight is turned on for a moment. N Pressing a remote control button when the remote control is on turns the button backlight on for a moment. If you touch or move the remote control and the motion is detected by the sensor of the remote control, the button backlight will be turned on for a moment. N The button backlight will not be turned on when the remote control is turned off. Viewing the Display The display identifies the current channel and the status of certain audio-video settings. 1. Press the INFO button on the remote control. The TV will display the channel, the type of sound, and the status of certain picture and sound settings. TV #1 DTV Air 13-1 Fri, Dec 19 2:05 am Dolby Digital Next Program M. Spillane’s Mike Hammer 1080i 16:9 English 1:55 am - 2:55 am Bonocrunch Prison Break 2:55 am - 3:55 am O Press the INFO button once more or wait approximately 10 seconds and it disappears automatically. English - 17 BN68-02269A_Eng.indb 17 2009-03-31 오후 5:10:03 Viewing the Menus Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions. 1. Press the MENU button. The main menu is displayed on the screen. Its left side has the following icons: Picture, Sound, Channel , Setup, Input, Application, Support. 2. Press the ▲ or ▼ button to select one of the icons. Press the ◄ or ► button to access the icon’s sub-menu. 3. Press the ▲ or ▼ button to move to items in the menu. Press the ENTERE button to enter items in the menu. 4. Press the ▲/▼/◄/► button to change the selected items. Press the RETURN button to return to the previous menu. 5. Press the EXIT button to exit from the menu. Using the remote control buttons Button MENU RETURN EXIT Operations Button Display the main on-screen menu. ▲/▼/◄/► Move the cursor and select an item. ENTERE Choose the currently selected item. Confirm the setting. Return to the previous menu. Exit the on-screen menu. Operations ❑ Example: Setting the TV’s Brightness in the Picture Menu Picture Adjusting the Brightness to 80 1. Press the MENU button to display the menu. Mode : Standard Cell Light :4 Contrast : 95 Brightness : 45 Sharpness : 50 Color : 50 Tint (G/R) : G50/R50 Advanced Settings Picture 2. Press the ENTERE button to select Picture. Mode :Standard Cell Light :4 Contrast : 95 Brightness : 45 Sharpness : 50 Color : 50 Tint (G/R) : G50/R50 ► Advanced Settings Picture 3. Press the ▲ or ▼ button to select Brightness. 4. Press the ENTERE button. Cell Light Contrast :4 : 95 Brightness : 45 Sharpness : 50 Color : 50 Tint (G/R) : G50/R50 ► Advanced Settings Picture Options Picture Reset 5. Press the ◄ or ► button until the Brightness changes to 80. 6. Press the ENTERE button. N Press the EXIT button to exit from the menu. Brightness Move 45 Adjust Enter Brightness Move Return 80 Adjust Enter Return English - 18 BN68-02269A_Eng.indb 18 2009-03-31 오후 5:10:04 Plug & Play Feature The first time you turn on your new TV, choose your basic settings for language, input source and channels, and time of day using the plug & play feature. The TV will store these settings in memory. Storing the channels in memory will allow you to scan the stored channels rather than have to enter their digits each time you want to change channels. N The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running. N The Screen Saver is activated if there is no operating signal for longer than 15 minutes. 1. Press the POWER button on the remote control. Select Language of the OSD menu is automatically displayed. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTERE button to confirm your choice. Plug & Play Select Language of the OSD. English Language : 2. Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTERE button. environment. Use (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds. 3. Press the ▲ or ▼ button to select the Antenna source to memorize. Press the ENTERE button to select Start. • Air: Air antenna signal. • Cable: Cable antenna signal. • Auto: Air and Cable antenna signals. N In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area. 4. The TV will begin memorizing all of the available channels. 6. 7. 8. E Enter Plug & Play Select the Antenna source to memorize. Start Air U Move Cable Enter Start Auto Start U Move E Enter Skip Plug & Play Auto Program in Progress. DTV Air : 0 Air : 0 DTV Cable : 0 Cable : 0 Skip Air 13 0% Stop N To stop the search before it has finished, press the ENTERE button with Stop 5. Français U Move N We recommend setting the TV to Home Use mode for the best picture in your home N Store Demo mode is only intended for use in retail environments. N If the unit is accidentally set to Store Demo mode and you want to ���������� return to Home Español E Enter Skip selected. N After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears. Press the ENTERE button when channel memorization is complete. The message Set the Clock Mode. is displayed. Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then Press the ENTERE button. The message Set to daylight saving time. is displayed. If you select Manual, Set current date and time is displayed. For detailed descriptions about the Manual, refer to page 34. Press the ▲ or ▼ button to select Off, On, or Auto, then press the ENTERE button. The image to select time zone in which you live is automatically displayed. Press the ▲ or ▼ button to Select the time zone, then press the ENTERE button. If you have received a digital signal, the time will be set automatically. If not, see page 34 to set the clock. The brief instruction on How to get the best performance from your new HDTV is displayed. Press the ENTERE button. N You can change to the previous or next page by pressing the ◄ or ► button. N You can access the HD Connection Guide in the Support menu. 9. The message Enjoy your TV. is displayed. N If you want to view the TV immediately, select the Watch TV. N If you want to view the See Product Guide, press the ENTERE button. If you want to reset this feature... N The Plug & Play feature is only available in the TV mode. Setup 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button. 2. Press the ENTERE button again to select Plug & Play. For further details on setting up options, press the ENTERE button again. Plug & Play Language ► : English Time Game Mode : Off BD Wise : On Network Type : Cable Network Setup V-Chip English - 19 BN68-02269A_Eng.indb 19 2009-03-31 오후 5:10:04 Channel Control Storing Channels ❑ Antenna → Air / Cable T Press the TOOLS button to display Tools menu. You can also switch the air / cable by selecting Tools → Switch to Cable (or Air) Channel Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). Antenna : Air ► Auto Program Clear Scrambled Channel Channel List ❑ Auto Program Fine Tune • Air: Air antenna signal. • Cable: Cable antenna signal. • Auto: Air and Cable antenna signals N When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. N After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears. N If you want to stop Auto Programming, press the ENTERE button. The Stop Auto Program? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the ENTERE button. ❑ Clearing Scrambled Channel (Digital channels only) The Clear Scrambled Channel function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. N To stop searching scrambled channels: Press the ENTERE button to select Stop. Press the ◄ button to select Yes, then press the ENTERE button. N This function is only available in Cable mode. ❑ Fine Tune (Analog channels only) If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, Air 7* you may have to fine tune the channel manually. N Fine tuned channels that have been saved are marked with an asterisk * on the right-hand side of the channel number in the channel banner. UMove N If you do not store the fine-tuned channel in memory, adjustments are not saved. N To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTERE button. Fine Tune Fine Tuned +5 Reset L Adjust Save Return English - 20 BN68-02269A_Eng.indb 20 2009-03-31 오후 5:10:04 Managing Channels ❑ Channel List Using this menu, you can Add / Delete or set Favorite channels and use the program guide for digital broadcasts. O Press the CH LIST button on the remote control to display the Channel list menu. N Select a channel in the All Channels, Added Channels, Favorite, or Programmed • • • • screen by pressing the ▲ or ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel. All Channels: Shows all currently available channels. Added Channels: Shows all added channels. Favorite: Shows all favorite channels. Programmed: Shows all current reserved programs. Using the Color buttons with the Channel List • Red (Antenna): Toggle between your TV, Radio, Data / Other and All. • Green (Zoom): Enlarges or shrinks a channel number. • Yellow (Select): Selects multiple channel lists. • TTOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel Name Edit, Select All, Deselect All, and Auto Program menus (The Options menus may differ depending on the situation.) N Channel Status Display Icons ♥ A channel set as a Favorite. c A channel selected by pressing the yellow button. ) A reserved program ( A program currently being broadcast. ❑ Channel List Tools Menu (in All Channels / Added Channels / Favorite) Add / Delete You can delete or add a channel to display the channels you want. N All deleted channels will be shown on All Channels menu. N A gray-colored channel indicates the channel has been deleted. N The Add menu only appears for deleted channels. N You can also delete a channel to the Added Channels or Favorite menu in the same manner. Add to Favorite / Delete from Favorite You can set channels you watch frequently as favorites. T Press the TOOLS button to display Tools menu. 6-1 TV#6 7-1 TV#7 9-1 TV#7 Delete 10-1 TV#10Timer Viewing Add to Favorite 11-1 TV#11Select All 19-1 TV#19Auto Program 20 Air 21 Air 22 Air 23 Air All Channels All Channels N Press the TOOLS button to use the tools menu. N Tools menu items may differ depending on the channel status. Antenna Air Zoom N The “♥” symbol will be displayed and the channel will be set as a favorite. N All favorite channels will be shown on Favorite menu. O To select the favorite channels you have set up, press the FAV.CH button on the TV#6 7-1 TV#7 9-1 TV#7 Delete 10-1 TV#10Timer Viewing Add to Favorite TV#11Select All 19-1 TV#19Auto Program 20 Air 21 Air 22 Air 23 Air T Tools ► Next Program 6-1 11-1 You can also set the favorite channel by selecting Tools → Add to Favorite (or Delete from Favorite) Select Antenna Air Zoom Select T Tools ► Next Program remote control. All Channels Timer Viewing If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a program , set the current time first. N Only memorized channels can be reserved. N You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote control. N Reserving a program will be shown on Programmed menu. N Digital Program Guide and Viewing Reservation: When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve a program according to the procedures described above. 6-1 TV#6 7-1 TV#7 9-1 TV#7 Delete 10-1 TV#10Timer Viewing Add to Favorite 11-1 TV#11Select All 19-1 TV#19Auto Program 20 Air 21 Air 22 Air 23 Air Antenna Air Zoom Select T Tools ► Next Program Continued... English - 21 BN68-02269A_Eng.indb 21 2009-03-31 오후 5:10:05 Channel Name Edit (Analog channels only) Channels Can be labeled so that their call letters appear whenever the channel is selected. N The names of digital broadcasting channels are automatically assigned and cannot be labeled. Select All / Deselect All You can select or deselect all channels in the channel list. N You can perform the Add / Delete, Add to Favorite / Delete from Favorite function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time. N The c mark appears to the left of the selected channels. N You can only select Deselect All when there is a selected channel. Auto Program For further details on setting up options, refer to page 20. Programmed ❑ Channel List Tools Menu (in Programmed) You can view, modify or delete a reservation. N Press the TOOLS button to use the tools menu. Change Info Select to change a viewing reservation. Cancel Schedules Select to cancel a viewing reservation. 12/10/2009 4:34 am 103 Change Info 4 : 35 am 8 Information 8 Cancel Schedules Select All Air Information Select to view a viewing reservation. You can also change the reservation information. Select All / Deselect All You can select or deselect all channels in the channel list. Antenna Zoom Select T Tools E Information English - 22 BN68-02269A_Eng.indb 22 2009-03-31 오후 5:10:05 Picture Control Changing the Picture Settings ❑ Mode Picture You can select the type of picture which best corresponds to your viewing requirements. • Dynamic: Select a high-definition picture for bright environments. • Standard: Selects the optimal picture display for normal environments. This setting is convenient for most situations. • Eco: Selects the picture for an optimum and eye-comfortable display. N This mode has the advantage of reducing power consumption. N Eco is not available in PC mode. • Movie: Selects a comfortable picture display for dark environments. Mode :Standard Cell Light :4 Contrast : 95 Brightness : 45 Sharpness : 50 Color : 50 Tint (G/R) : G50/R50 ► Advanced Settings T Press the TOOLS button to display Tools menu. You can also configure the picture mode by selecting Tools → Picture Mode. Mode Picture ❑ Cell Light / Contrast / Brightness / Sharpness / Color / Tint (G/R) : Standard Cell Light : 4 ► Your television has several setting options that allow you to control the picture quality. Brightness : 45 • Cell Light: Adjusts the pixel brightness. Sharpness : 50 • Contrast: Adjusts the contrast level. Color : 50 • Brightness: Adjusts the brightness level. Tint (G/R) : G50/R50 • Sharpness: Adjusts the sharpness. Advanced Settings • Color: Adjusts the color saturation of the picture using the bar on the screen. Picture Options • Tint (G/R): Adjusts the color tint of the picture by compensating the red and green color. N When you make changes to Cell Light, Contrast, Brightness, Sharpness, Color, or Tint (G/R), the OSD will be adjusted accordingly. N The adjusted values are saved for each picture mode. N In PC mode, you can only make changes to Cell Light, Contrast, and Brightness. N Each adjusted setting will be stored separately according to its input mode. N This TV includes the Cell Light function to adjust the panel brightness. N The energy consumed during use can be significantly reduced if the brightness level is lowered, which will reduce the overall running cost. Color : 50 You can adjust the detailed settings for your screen including the color and contrast. N Advanced Settings is available in Standard or Movie mode. N In PC mode, you can only make changes to Dynamic Contrast, Gamma and White Balance from among the Advanced Settings items. Black Tone You can enhance the picture depth by adjusting the black color density. • Off: Turns the Black Adjust function off. • Dark: Sets the black color depth to dark. • Darker: Sets the black color depth to darker. • Darkest : Sets the black color depth to darkest. Dynamic Contrast You can adjust the screen contrast so that the optimal contrast is provided. • Off: Turns the Dynamic Contrast function off. • Low: Sets Dynamic Contrast to low. • Medium: Sets Dynamic Contrast to medium. • High: Sets Dynamic Contrast to high. Picture ❑ Advanced Settings Contrast : 95 Tint (G/R) : G50 / R50 Advanced Settings ► Picture Options Picture Reset Advanced Settings Black Tone : Off Dynamic Contrast : Medium Gamma :0 Color Space : Native ► White Balance Flash Tone Edge Enhancement :0 : On U Move E Enter R Return Gamma You can adjust the middle level of luminance. Continued... English - 23 BN68-02269A_Eng.indb 23 2009-03-31 오후 5:10:05 Color Space Color Space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most natural color. • Auto: Automatically sets the color range depending on the input video source. • Native: Sets the color range wider than that of the input video source. • Custom : Adjusts the color range to suit your preference. N Customizing the Color Space - Adjusts the Color range to suit your preference. Color is available when Color Space is set to Custom. - Color : Red / Green / Blue / Yellow / Cyan / Magenta - Red / Green / Blue : You can adjust the RGB values for the selected color. - Reset : Resets the color space to the default values. White Balance You can adjust the color temperature for more natural picture colors. • R-Offset: Adjust the low level red intensity. • G-Offset: Adjust the low level green intensity. • B-Offset: Adjust the low level blue intensity. • R-Gain: Adjusts the high level red intensity. • G-Gain: Adjusts the high level green intensity. • B-Gain: Adjusts the high level blue intensity. • Reset: Resets the default white balance. N Changing the adjustment value will refresh the adjusted screen. Flesh Tone You can adjust the flesh tone to be more or less red. N Changing the adjustment value will refresh the adjusted screen. Edge Enhancement → Off / On You can emphasize object boundaries in the picture. White Balance R-Offset 25 ▶ G-Offset 25 B-Offset 25 R-Gain 25 G-Gain 25 B-Gain 25 Reset U Move E Enter R Return xvYCC ���������� →��������� Off / On Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD player). N xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode. ❑ Picture Options Tint (G/R) You can customize the additional picture settings to suit your preference. Protection from among the items in Picture Options. Color Tone → Cool / Normal / Warm1 / Warm2 / Warm3 You can select the most comfortable color tone for viewing. N Warm1, Warm2 or Warm3 is only activated when the picture mode is Movie. N Settings can be adjusted and stored for each external device you have connected to an input of the TV. Size Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to work best with specific types of video input. Your satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible. • 16:9 : Sets the picture to the 16:9 aspect ratio. • Zoom1: Stretches the 16:9 aspect ratio picture vertically. • Zoom2: Stretches the Zoom 1 picture vertically. • Wide Fit: Stretches the picture both horizontally and vertically to display the optimal picture. • 4:3: Sets the picture to the 4:3 aspect ratio. • Screen Fit: Displays the full native HD signal that cannot be viewed using a normal TV. O Press the P.SIZE button to change the picture size. Picture N In PC mode, you can only make changes to the Color Tone, Size and Screen Burn : G50/R50 Advanced Settings Picture Options ► Picture Reset Picture Options Color Tone : Normal Size : 16:9 Digital NR : Auto HDMI Black Level : Normal ► 1080 Full HD Motion Demo : Normal Film Mode Blue Only Mode : Off : Off d U Move E Enter R Return N Each adjusted setting will be stored separately according to its input mode. English - 24 BN68-02269A_Eng.indb 24 Continued... 2009-03-31 오후 5:10:06 16:9 Wide Fit Zoom1 Zoom2 4:3 Screen Fit N The items available may differ depending on the selected mode. N Temporary image retention may occur when viewing a static image on the set for more than two hours. N After selecting Zoom1, Zoom2 or Wide Fit: N N N N N Press the ◄ or ► button to select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture up and down. Reset : Press the ◄ or ► button to select Reset, then press the ENTERE button. You can initialize the setting. After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode: Select Position by pressing the ◄ or ► button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. The TV will be reset to 16:9. Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), Component (1080i/1080p) or DTV (1080i) signals are input. HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) When Double ( , ) mode has been set in PIP, the Picture Size cannot be set. Image retention may occur when viewing a static (non-moving) image on the set for an extended period of time. Input Source Picture Size ATV, Video, Component (480i, 480p) DTV(720p), Component (720p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC 16:9, Zoom1, Zoom2, 4:3 Digital NR If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. • Off: Turns the Digital NR function off. • Low: Sets Digital NR to low. • Medium: Sets Digital NR to medium. • High: Sets Digital NR to high. • Auto: Sets Digital NR to Auto. 16:9, Wide Fit, 4:3 16:9, 4:3, Wide Fit, Screen Fit 16:9, 4:3 Picture Options Color Tone : Normal Size : 16:9 Digital NR : Auto HDMI Black Level : Normal ► 1080 Full HD Motion Demo : Off Film Mode Blue Only Mode : Off : Off d U Move E Enter R Return HDMI Black Level You can directly select the black level on the screen to adjust the screen depth. • Normal: The screen gets brighter. • Low: The screen gets darker. N This function is active only when an external device is connected to the TV via HDMI. N HDMI Black Level function may not be compatible with all external devices. 1080 Full HD Motion Demo → Off / On Samsung’s new generation PDP panels deliver stunning Full HD motion clarity when viewing fast action sports, movies, and games. N This function is not available in PC, Game, or Media Play mode. Continued... English - 25 BN68-02269A_Eng.indb 25 2009-03-31 오후 5:10:08 Film Mode You can optimize the picture mode for watching movies. • Off: Turn the Film Mode function off. • Auto1 : Automatically adjusts the picture for the best quality when watching a film. • Auto2 : Automatically optimizes the video text when watching a film. • Cinema Smooth: Offers the ultimate cinema experience. N This function is available when the external input connects to HDMI(1080p, 24Hz). N Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i). Blue Only Mode → Off / On This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc. N Blue Only Mode is available when the picture mode is set to Movie or Standard. Screen Burn Protection Configures the Screen Burn Protection options to prevent and reduce pixel burn. When an image remains in one position too long, it may cause a permanent burn on the screen. Picture Options ▲ Size : 16:9 Digital NR : Auto HDMI Black Level : Normal 1080 Full HD Motion Demo : Off Film Mode : Off Blue Only Mode : Off ► Screen Burn Protection U Move E Enter R Return Screen Burn Protection Preventing Screen Burn-in Pixel Shift To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. • Pixel Shift : Shifts the picture to prevent and reduce pixel burn. N Optimum condition for pixel shift; Side Gray ► Scrolling Item TV/AV/Component/HDMI/PC Horizontal 0~2 2 Vertical 0~4 4 Time(min) 1~4min. 2 min. : Light U Move E Enter R Return N The Pixel Shift value may differ depending on the monitor size (inches) and mode. • Side Gray : When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light. - Light: When you set the screen ratio to 4:3, it brightens the left and right sides. - Dark: When you set the screen ratio to 4:3, it darkens the left and right sides. N To remove after-images on the screen, use the Scrolling function. N Press any key on the remote control to cancel this feature. Reducing the Effects of Screen Burn If screen burn has occurred, you can select Scrolling to help remove screen burn artifacts. • Scrolling : This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time (approximately 1 hour). N The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove afterimages on the screen. If the after-image is not removed after performing the function, repeat the function again. ❑ Picture Reset → Reset Picture Mode / Cancel Picture Resets all picture settings to the default values. N Select a picture mode to be reset. The reset is performed for each picture mode. Advanced Settings Picture Options Picture Reset ► English - 26 BN68-02269A_Eng.indb 26 2009-03-31 오후 5:10:08 PC Display Using Your TV as a Computer (PC) Display Setting Up Your PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. First, click on Control Panel on the ����������������������� Windows start menu. 2. When the control panel window appears, click on Appearance and Themes and a display dialog-box will appear. 3. When the control panel window appears, click on Display and a display dialog-box will appear. 4. Navigate to the Settings tab on the display dialog-box. The correct size setting (resolution) Optimum : 1920 X 1080 pixels. If a vertical frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click OK and exit the dialog box. Display Modes If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing. D-Sub and HDMI/DVI Input Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 +/-/+ MAC 640 x 480 832 x 624 1152 x 870 35.000 49.726 68.681 66.667 74.551 75.062 30.240 57.284 100.000 -/-/-/+ VESA CVT 720 x 576 1152 x 864 1280 x 720 1280 x 720 1280 x 960 35.910 53.783 44.772 56.456 75.231 59.950 59.959 59.855 74.777 74.857 32.750 81.750 74.500 95.750 130.000 -/+ -/+ -/+ -/+ -/+ VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 800 1280 x 800 1280 x 960 1280 x 1024 1280 x 1024 1360 x 768 1440 x 900 1440 x 900 1680 x 1050 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 49.702 62.795 60.000 63.981 79.976 47.712 55.935 70.635 65.290 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 59.810 74.934 60.000 60.020 75.025 60.015 59.887 74.984 59.954 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 83.500 106.500 108.000 108.000 135.000 85.500 106.500 136.750 146.250 -/-/-/+/+ +/+ +/+ -/-/+/+ +/+ -/+ -/+ +/+ +/+ +/+ +/+ -/+ -/+ -/+ VESA GTF 1280 x 720 1280 x 1024 52.500 74.620 70.000 70.000 89.040 128.943 -/+ -/- VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+ N N N N N When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal. The interface mode is not supported. The set might operate abnormally if a non-standard video format is selected. Separate and Composite modes are supported. SOG is not supported. Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080). English - 27 BN68-02269A_Eng.indb 27 2009-03-31 오후 5:10:09 Setting up the TV with your PC N Preset: Press the SOURCE button to select PC mode. Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. T Press the TOOLS button to display Tools menu. Picture ❑ Auto Adjustment Brightness : 45 Sharpness : 50 Auto Adjustment ► Screen Advanced Settings Picture Options You can also set the Auto Adjustment by selecting Tools → Auto Adjustment. Picture Reset N This function does not work in DVI-Digital mode. ❑ Screen The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of the screen. Coarse Adjusts the frequency when vertical noise appears on the screen. Fine Adjusts the screen to be clearer. PC Position Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ►button to adjust the Horizontal-Position. Image Reset You can replace all image settings with the factory default values. Screen Coarse 50 Fine 4 PC Position Image Reset U Move E Enter R Return E Enter R Return PC Position n Adjust English - 28 BN68-02269A_Eng.indb 28 2009-03-31 오후 5:10:09 Sound Control Changing the Sound Settings ❑ Mode Sound You can select the type of special sound effect to be used when watching a given broadcast. • Standard: This sound mode is for general purposes. • Music: Music mode enables you to listen to music as if you are sitting in a concert hall. • Movie: Movie mode enables you to experience live and full movie sound as if you are sitting in a movie theater. • Clear Voice: Emphasizes voice over other sounds. Select this sound mode when watching news, soap operas, or documentaries. • Custom: You can customize the sound settings to suit your personal preferences. Mode ❑ Equalizer The sound settings can be adjusted to suit your personal preferences. • Mode: Selects the sound mode among the predefined settings. • Balance: Adjusts the balance between the right and left speaker. • 100Hz, 300Hz, 1kHz, 3kHz, 10kHz (Bandwidth Adjustment): Adjusts the level of different bandwidth frequencies. • Reset: Resets the equalizer settings to the default values. ► SRS TruSurround HD : Off Preferred Language : English Multi-Track Sound : Stereo Auto Volume : Off Speaker Select : TV Speaker Sound Select : Main T Press the TOOLS button to display Tools menu. You can also set the sound mods by selecting Tools → Sound Mode : Custom Equalizer Equalizer Mode : Custom ► Balance L R 100Hz - + 300Hz - + 1KHz - + 3KHz - 10KHz - + + ▼ U Move E Enter R Return ❑ SRS TruSurround HD → Off / On SRS TruSurround HD is the combined technology of TruSurround and FOCUS, TruBass. SRS TruSurround HD enables you to enjoy a virtual 5.1 Surround Sound effect over the TV’s two speakers. This function provides not only rich deep bass , but also improves high frequency resolution. T TOOLS button to display Tools menu. You can also set the SRS TruSurround HD by selecting Tools → SRS TS HD. TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. ❑ Preferred Language (Digital channels only) Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). N You can only select the language from among the actual languages being broadcast. O You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control. ❑ Multi-Track Sound (MTS) (Analog channels only) Depending on the particular program being broadcast, you can listen to Mono, Stereo, or SAP. • Mono: Sets the sound to mono. • Stereo: Sets the sound to stereo. • SAP: Sets the sound to the second audio program. O Press the MTS button on the remote control repeatedly to select Mono, Stereo, or SAP. ❑ Auto Volume → Off / On Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Continued... English - 29 BN68-02269A_Eng.indb 29 2009-03-31 오후 5:10:09 ❑ Speaker Select Sound You can set to have sound output from the TV’s internal speakers or from external speakers connected to your sound system. • External Speaker: Uses the external speakers(Home Theater) to output sound. • TV Speaker: Uses the TV speakers to output sound. N If you select External Speaker in the Speaker Select menu, the sound settings will be limited. N The volume buttons and MMUTE buttons do not operate when the Speaker Select is set to External Speaker. Please set the volume on your Home theater. Multi-Track Sound : Stereo Auto Volume : Off Speaker Select : TV Speaker Sound Select : Main ► Sound Reset TV's Internal Speakers Audio Out (Optical, L / R Out) to Sound System TV / AV / Component / PC / HDMI TV / AV / Component / PC / HDMI TV Speaker Speaker Output Sound Output External Speaker Mute Sound Output Video No Signal Mute Mute ❑ Sound Select When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. Main Listen to the sound of the main picture. Sub Listen to the sound of the sub picture. T Press the TOOLS button to display Tools menu. You can also set the sound of the sub picture by selecting Tools → PIP → Sound Select. N You can select this option when PIP is set to On. ❑ Sound Reset Reset All / Reset Sound Mode / Cancel You can restore the Sound settings to the factory defaults. Function Description Configuring the Setup Menu ❑ Language You can set the menu language. Setup ❑ Game Mode → Off / On When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting the game menu. When the Game Mode is On • Picture mode is automatically changed to Standard and cannot be changed. Plug & Play Language : English ► Time Game Mode : Off BD Wise : On Network Type : Cable Network Setup V-Chip Caption • Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer. • The Reset in the Sound menu is activated. Selecting the Reset function after setting the equalizer resets the equalizer settings to the factory defaults. N Game Mode is not available in regular TV mode or Game Mode set to Off. N If the picture is poor when an external device is connected to the TV, check if Game Mode is On. N If you display the TV menu in Game mode, the screen shakes slightly. N The mark ( ) appears on the screen which means that Game Mode is on with the selected source. N Game mode is not available in PC mode. English - 30 BN68-02269A_Eng.indb 30 Continued... 2009-03-31 오후 5:10:09 ❑ BD Wise → Off / On Provides the optimal picture quality for SAMSUNG DVD, Blu-ray and Home Theater products which support BD Wise. You can enjoy a richer picture when using them connected to this Samsung TV. N Connect SAMSUNG products that have BD Wise using an HDMI cable. N This function is active only when an external device is connected to the TV via HDMI. N When the BD Wise set to On, the picture mode is automatically changed to the optimal resolution. ❑ V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. N V-Chip function is not available in HDMI, Component or PC mode. N The default PIN number of a new TV set is ‘0-0-0-0’. N If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to ‘0-0-0-0’ : Power Off. → M MUTE → 8 → 2 → 4 → Power On. N Allow all: Press to unlock all TV ratings. N Block all: Press to lock all TV ratings. V-Chip Lock → Off / On Turns the V-Chip function on/off. TV Parental Guidelines You can block TV programs depending on their rating. This function allows you to control what your children are watching. • Base Categories TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience V-Chip V-Chip Lock : On ► TV Parental Guidelines MPAA Rating Canadian English Canadian French Downloadable U.S. Rating Change PIN U Move E Enter R Return TV Parental Guidelines • Sub-ratings All: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog Allow All Block All n Move E Enter R Return N The TV-Y, TV-Y7, TV-G, TV-PG, TV-14, and TV-MA have additional options. See the next step to change any of the following sub-ratings. N The V-Chip will automatically block certain categories that are more restrictive. For example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TVMA). The sub-ratings (D, L, S, V) work together similarly. MPAA Rating You can block movies depending on their MPAA rating. The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. • G: General audience (no restrictions). • PG: Parental guidance suggested. • PG-13: Parents strongly cautioned. • R: Restricted. Children under 17 should be accompanied by an adult. • NC-17: No children under age 17. • X: Adults only. • NR: Not rated. N The V-Chip will automatically block any category that is More restrictive. For example, if you block the PG-13 category, then R, NC-17 and X will automatically be blocked also. MPAA Rating Allow All Block All n Move E Enter R Return Canadian English You can block TV programs depending on their Canadian English rating. • C: Programming intended for children under age 8. • C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. • G: General programming, suitable for all audiences. • PG: Parental Guidance. • 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14. • 18+: Adult programming. N The V-Chip will automatically block any category that is More restrictive. For example, if you block G category, then PG, 14+ and 18+ will automatically be blocked also. Continued... English - 31 BN68-02269A_Eng.indb 31 2009-03-31 오후 5:10:10 Canadian French You can block TV programs depending on their French Canadian rating. • G: General • 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. • 13 ans+: Programming may not be suitable for children under the age of 13. • 16 ans+: Programming is not suitable for children under the age of 16. • 18 ans+: Programming restricted to adults. N The V-Chip will automatically block any category that is More restrictive. For example, if you block 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also. Canadian French Allow All Block All n Move E Enter R Return Downloadable U.S. Rating Parental restriction information can be used while watching DTV channels N If information is not downloaded from the broadcasting station, the Downloadable U.S. Rating menu is deactivated. N Parental restriction information is automatically downloaded while watching DTV channels. It may take several seconds. N The Downloadable U.S. Rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use. N Parental restriction levels differ depending on the broadcasting station. N The default menu name and Downloadable U.S. Rating changes depending on the downloaded information. N Even if you set the On-screen display to your desired language, the Downloadable U.S. Rating menu will appear in English only. N The rating will automatically block certain categories that are more restrictive. N The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station. Change PIN You can change four-digit code to use the V-Chip function. N The default PIN code for a new TV set is '0-0-0-0'. N If you change the PIN code completely, the message PIN is changed successfully. is displayed. How to Reset the TV after the V-Chip Blocks a Channel (Emergency Escape) If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear. 1. Enter your PIN. To resume normal viewing, tune to a different channel using CH < or CH > button. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use the V-Chip function for an emergency escape. N If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to '0-0-0-0' : Power Off. → MMUTE → 8 → 2 → 4 → Power On. ❑ Caption (On-Screen Text Messages) N The Caption feature doesn’t work in Component, HDMI or PC modes. N The availability of captions depends on the program being broadcast. O Press the CC button on the remote control to turn the Caption On or Off. Setup Digital The Digital Captions function operates on digital channels. • Caption Mode : Default, Service1~Service6, CC1~CC4, Text1~Text4 • Digital Caption Options - Size : You can select the caption font size. - Font Style : You can select the caption font. - Foreground Color : You can select the color of the captions. - Background Color : You can select the background color for the captions. - Foreground Opacity : You can select the opacity of the caption foreground. - Background Opacity : You can select the opacity of the background for the captions. - Return to Default : Returns to the default settings of the broadcasting station for the captions. N N N N N Network Setup V-Chip Caption Melody Energy Saving ► : Medium : Off PIP Digital Caption Options are available only when Default and Service1~Service6 can be selected in Caption Mode. Service1~6 in digital caption mode may not be available depending on the broadcast. Default means to follow the standard set by the broadcaster. Foreground and Background cannot be set to have the same color. Foreground Opacity and Background Opacity cannot be both set to Transparent. Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. • Caption Mode : Default, CC1~CC4, Text1~Text4 N The Caption feature doesn’t work in Component, PC, HDMI modes. English - 32 BN68-02269A_Eng.indb 32 2009-03-31 오후 5:10:10 ❑ Melody V-Chip Caption Setup The TV power on / off melody sound can be adjusted. • Off: Turns off the melody function. • Low: Sets the melody volume to low. • Medium: Sets the melody volume to medium. • High: Sets the melody volume to high. N The Melody does not play. Melody : Medium Energy Saving : Off ► PIP - When no sound is output from the TV because the MMUTE button has been pressed. - When no sound is output from the TV because the volume has been reduced to minimum with the VOL button. - When the TV is turned off with the Sleep Timer function. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ❑ Energy Saving This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy Saving mode option to High to reduce eye fatigue as well as power consumption. • Off: Turns the Energy Saving function off. • Low: Sets the Energy Saving function to low. • Medium: Sets the Energy Saving function to medium. • High: Sets the Energy Saving function to maximum. Viewing the Picture in Picture (PIP) N While V-Chip or Internet@TV is in operation, the PIP function cannot be used. N If you turn the TV off while watching in PIP mode and turn it on again, the PIP window Setup You can use the PIP feature to simultaneously watch the TV tuner and one external video source. This product has one built-in tuner, which does not allow PIP to function in the same mode. Melody : Medium Energy Saving : Off PIP ► will disappear. N You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke. T Press the TOOLS button to display Tools menu. You can also configure PIP related settings by selecting Tools → PIP. PIP ❑ PIP → Off / On You can activate or deactivate the PIP function. Main picture Sub picture Component HDMI 1, HDMI2/DVI, HDMI 3, HDMI 4 TV PIP : Off Size : Position : Air/Cable : Air Channel : Air 27 E Enter PC Size → / / / You can select a size of the sub-picture. N If main picture is in HDMI mode, Size is not available. Position → / / / You can select a position of the sub-picture. N In Double ( , ) mode, Position cannot be selected. Air/Cable You can select an antenna source of sub-picture. Channel You can select a channel of the sub-picture. ► R Return English - 33 BN68-02269A_Eng.indb 33 2009-03-31 오후 5:10:10 Setting the Time ❑ Clock Setup Setting the clock is necessary in order to use the various timer features of the TV. N The current time will appear every time you press the INFO button. N If you disconnect the power cord, you have to set the clock again. Plug & Play Language Clock Mode You can set up the current time manually or automatically. • Auto : Set the current time automatically using the time from the digital broadcast. • Manual : Set the current time to a manually specified time. Clock Set You can set the current time manually. N This function is only available when Clock Mode is set to Manual. N You can set the Month, Day, Year, Hour, or Minute directly by pressing the number buttons on the remote control. Time Zone You can select your time zone. N The Antenna or cable must be connected in order to set the time automatically. : English Time ► Game Mode : Off BD Wise : On Network Type : Cable Network Setup V-Chip Caption Melody : Medium Time Clock Mode : Auto ► Clock Set Time Zone DST : Off U Move E Enter R Return DST (Daylight Saving Time) �� →� Off / On / Auto You can switch the Daylight Saving Time function on or off. N Time Zone, DST function are only available when Clock Mode is set to Auto. N Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. ❑ Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min. N To cancel the Sleep Timer function, select Off. Time Clock : 1:27 am Sleep Timer : Off Timer 1 : Inactivated Timer 2 : Inactivated Timer 3 : Inactivated ► T Press the TOOLS button to display Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer. ❑ Timer 1 / Timer 2 / Timer 3 U Move E Enter R Return Time 1 On Time Use this feature to set the TV to turn on or off at a desired time. 3 different On/Off times am 12 00 Inactivate can be set. You must set the clock first. Off Time am Inactivate 12 00 • On Time: Set the Hour, Minute, am/pm, and Activate/Inactivate. Volume Source Antenna Channel (To activate timer with the setting you’ve chosen, set to Activate.) 9 TV Cable 3 • Off Time: Set the Hour, Minute, am/pm, and Activate/Inactivate. Repeat Sun Mon Tue Wed Thu Fri Sat (To activate timer with the setting you’ve chosen, set to Activate.) Once • Volume: Set the desired volume level. lr Move U Adjust E Enter R Return • Source : You can select the TV, TV Memory or USB device content to be played when the TV turns on automatically. Select TV, TV Memory or USB. (Make sure that an USB device is connected to your TV.) N When you select the TV, you can set the Antenna and Channel. - Antenna : Selects Air or Cable. - Channel : Selects the desired channel. N When you select the TV Memory or USB, you can set the Contents. - Contents : Selects the desired contents on the TV memory or USB. N The folder name can be a maximum of 64 English characters or digits long. N If the folder name is too long, the folder can not be selected. N When executing automatic power-on and 2 USB devices that have same manufacturer and folder name are simultaneously connected, the wrong USB device may be read. If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read. N When there is only one photo file in the USB or the TV Memory, the Slide Show will not play. • Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. N When Manual is selected, press the ►button to select the desired day of the week. Press the ENTERE button over the desired day and the c mark will appear. N You can set the hour, minute and channel by pressing the number buttons on the remote control. N Auto Power Off When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time. English - 34 BN68-02269A_Eng.indb 34 Continued... 2009-03-31 오후 5:10:11 Source List / Edit Name ❑ Source List Input Use to select TV or other external input sources such as DVD / Blu-ray players / Cable boxes / Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. TV, AV1, AV2, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB. N You can choose only those external devices that are connected to the TV. In the Source List, connected inputs will be highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom. N If USB devices are connected to the USB1(HDD) and USB2 jacks, they are displayed as USB1 and USB in order. N Using the Color buttons on the remote with the Source list - Red (Refresh): Refreshes the connected external devices. Press this if your Source is on and connected, but does not appear in the list. - T TOOLS (Tools): Displays the Edit Name and Information menus. O Press the SOURCE button on the remote control to view an external signal source. Source List Edit Name ❑ Edit Name Edit Name You can name the device connected to the input jacks to make your input source selection easier. AV1 VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA N When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 2(DVI) port, you should set the HDMI2/DVI mode to PC in the Edit Name menu. Component2 ---- AV2 VCR Component1 DVD Cable STB PC Satellite STB HDMI1 HDMI2/DVI PVR STB ▼ U Move E Enter R Return English - 35 BN68-02269A_Eng.indb 35 2009-03-31 오후 5:10:11 Support ❑ Legal Notice Support You can view legal notice and general disclaimer regarding third party contents and services. N The General Disclaimer may differ depending on the country. N You can move the previous or next page by pressing the ◄ or ► button. ❑ Product Guide Legal Notice ► Product Guide Self Diagnosis The Product Guide gives you information on the most important features of this TV. The descriptions provided by this function are in English only. N For more detailed information, select the desired item. • Picture Quality : 1080 Full HD Motion, Ultra FilterBright, Cinema Smooth, Picture Mode • [email protected] : Internet@TV-Content Service, Content Library Flash, USB2.0 Movie, DLNA Wireless • Eco-Friendly : Energy Saving, Eco-Material Software Upgrade HD Connection Guide Contact Samsung ❑ Self Diagnosis Picture Test If you think you have a picture problem, perform the picture test. Check the color pattern on the screen to see if the problem still exists. N Does the problem still exist with this test photo? appears on the screen. If the test pattern does not appear or there is noise in the test pattern, select Yes. If the test pattern is properly displayed, select No. • Yes: There may be a problem with the TV. Contact Samsung’s Call Center at 1-800-SAMSUNG for assistance. • No: There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual. Sound Test If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound through the TV. N Does the problem still exist with this sound test? appears on the screen. If during the sound test you can hear sound only from one speaker or not at all, select Yes. If you can hear sound from the speakers, select No. • Yes: There may be a problem with the TV. Contact Samsung’s Call Center at 1-800-SAMSUNG for assistance. • No: There may be a problem with your external equipment. Please check your connections. If the problem still persists, refer to the external device’s user manual. N If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV speaker in the Sound menu. N The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MMUTE button. Signal Strength (Digital channels only) You can adjust your antenna to improve the reception of available digital channels. N If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal. English - 36 BN68-02269A_Eng.indb 36 Continued... 2009-03-31 오후 5:10:11 ❑ Software Upgrade Product Guide Support Self Diagnosis Samsung may offer upgrades for your TV’s firmware in the future. Please visit Samsung. com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive Software Upgrade information about downloading upgrades and using a USB drive. Upgrades will be HD Connection Guide possible by connecting a USB drive to the USB port. Contact Samsung N When software is upgraded, video and audio settings you have made will return to their default (factory) settings. N We recommend you write down your settings so that you can easily reset them after the upgrade. N Please check the firmware version after the upgrades are complete. The new version will have a higher number than the older version. N Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied. The TV will shut off and turn on automatically after completing the firmware upgrade. By USB Insert a USB drive containing the firmware upgrade into TV. Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. ► TV Side Panel By Online Upgrades the software using the Internet. N First, configure your network. For detailed procedures on using the Network Setting, refer to the ‘Setting the Network’ instructions. N If the internet connection doesn’t operate properly, connection can be broken. Please retry downloading. If the problem still happens, download by USB and upgrade. USB Drive Alternative Software (Backup) If there is an issue with the new firmware and it is affecting operation, you can change the software to the previous version. N If software was changed, existing software is displayed. N You can change current software to alternative software by ‘Alternative Software’. ❑ HD Connection Guide Self Diagnosis Software Upgrade Support The brief instruction on How to get the best performance from your new HDTV is displayed. We offer the connection method for HD devices. N You can move the previous or next page by pressing the ◄ or ► button. HD Connection Guide ► Contact Samsung ❑ Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call center, product and software file download method. English - 37 BN68-02269A_Eng.indb 37 2009-03-31 오후 5:10:11 Media Play Connecting a USB Device 1. Press the POWER button to turn the TV on. 2. Connect a USB device containing photo, music and movie files to the USB jack on the side TV Side Panel of the TV. N USB 1(HDD) jack is also used as the HDD jack. HDD (Hard disk drive) is device which stores digitally encoded data. N Media Play only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash USB Drive Card Readers (Both USB HDD and HUB are not supported.) N MTP (Media Transfer Protocol) is not supported. N The file system only supports FAT16/32 (The NTFS file system is not supported). N Certain types of USB Digital camera and audio devices may not be compatible with this TV. N Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility problem. N Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not responsible for any data file damage or data loss. N Do not disconnect the USB device while it is loading. N MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only. N The sequential JPEG, Progressive JPEG format is supported. (The JPEG2000, JPEG XR format system is not supported). N Photo and audio files must be named in English, French or Spanish. If not, the files can not be played. Change the file names to English, French or Spanish if necessary. N The higher the resolution of the image, the longer it takes to display on the screen. N The maximum supported JPEG resolution is 15360X8640 pixels. N For unsupported or corrupted files, the Not Supported File Format message is displayed. N If sort key is set to Basic View, up to 1000 files can be displayed in each folder. The other sort key can display up to 10000 files. N MP3 files with DRM that have been downloaded from a non-free site cannot be played. N DRM(Digital Rights Management) prevents illegal uses of digital media for copyright protection. N When moving to a photo, loading may take a few seconds. ❑ Using the Remote Control Button in Media Play Menu Button Operations ▲/▼/◄/► Move the cursor and select an item. ENTERE Select the currently selected item. Play or pause the files while playing the Slide Sow, Music, or Movie files. Play or pause the Slide Show, Music, or Movie file. RETURN TOOLS Return to the previous menu. Run various functions from the Photo, Music and Movie menus. Stop the current Slide Show, Music or Movie file. Jump to previous group/Jump to next group. INFO MEDIA.P Exit Show file information. Enter or Exit Media Play mode. Exit Media Play mode. English - 38 BN68-02269A_Eng.indb 38 2009-03-31 오후 5:10:12 Using the Media Play Function This function enables you to view and listen to photo, music and movie files saved on a USB Mass Storage Class (MSC) device. ❑ Entering the Media Play Menu 1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. 2. Press the ▲ or ▼ button to select Media Play (USB & DLNA), then press the ENTERE button. O Press the MEDIA.P button on the remote control to display the Media Play menu. O Press the SOURCE button on the remote control repeatedly to select USB or DLNA, then press the ENTERE button. 3. Press the Red button, then press the ▲ or ▼ button to select the corresponding USB Memory Device (i.e. if connected through a hub). Press the ENTERE button. N This function differs depending on the USB Memory Device/ DLNA device connected to TV. N The selected USB device name appears at the bottom left of the screen. Media Play 148.48MB/149.00MB USB : USB PHOTO Photo USB Music Movie Setup Device R Return 4. Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENTERE button. N To exit Media Play mode, press the MEDIA.P button on the remote control. N In this mode, you can enjoy movie clips contained on a Game, but you cannot play the Game itself. Photo Preference Basic View Timeline ▶ 2 2009 Mar ▶ Photo ▶ 3 1 Color Color Slide Show Copy Play Current Group Folder 1 Copy Current Group Information Folder 2 IMG_0349. JPG IMG_0335.JPG Safe Remove ../ folder name/ Device Select T Tools R Upper Folder Nov Apr Jun Mar.01.2009 ◀ ▶ Device Timeline 1 1 Folder IMG_03496 IMG_03496 .JPG USB Basic View 1/67 c 5 Preference 4/6 USB ❑ Screen Display .JPG Folder ▶ You can remove the device safely from the TV. 1. Press the TOOLS button in the Media Play file list screen, or while a Slide Show, music, or movie file is being played. 2. Press the ▲ or ▼ button to select Safe Remove , then press the ENTERE button. 3. Remove the USB device from the TV. ▶ ❑ Removing a USB Memory Device Safely IMG_0335.JPG 6 Favorites Setting IMG_0343 .JPG 4 IMG_03496 .JPG 1File(s) Selected Select T Tools R Return 1. 2. 3 4. 5. Current Sort Standard: This field shows the current standard for sorting files. View Groups: The sorting group including the currently selected photo is highlighted. Currently selected file: The currently selected file is highlighted. Item Selection Information: Shows the number of photos that are selected by pressing the Yellow button. Current Device: Shows the currently selected device name. N Red (Device) button: Selects a connected device. 6. Help Items • Green (Favorites Setting) button: Changes the Favorites Setting for the selected file. Press this button repeatedly until the desired value appears. • Yellow (Select) button: Selects file from the file list. Selected files are marked with a symbol c. Press the yellow button again to cancel a file selection. • TOOLS (Tools) button: Displays the option menus. (The Tools menu changes according to the current status.) • R RETURN (Return) button: Return to previous menu. English - 39 BN68-02269A_Eng.indb 39 2009-03-31 오후 5:10:15 Using and Sorting Photo List You can sort photos in the Photo List by a particular standard. N N N N N 2009 Mar ▶ Color Apr Folder Nov Jun ▶ Mar.01.2009 1/67 ▶ 4. Press the ▼ button twice, then press the (Play)/ENTERE button to start the Slide Show in the order selected by the user. Timeline Preference Basic View ◀ N The photos are sorted according to the newly selected sorting standard. N To move to the previous/next group, press the (REW) or (FF) button. Photo ▶ 1. Press the MEDIA.P button on the remote control to display the Media Play menu. 2. Press the ◄ or ► button to select Photo, then press the ENTERE button. 3. Press the ▲ button twice, then press the ◄ or ► button to select a sorting standard. (Basic View, Timeline, Color, Folder, Preference) IMG_03496 IMG_03496 .JPG .JPG IMG_0343 .JPG IMG_0335.JPG USB Device Favorites Setting IMG_03496 .JPG Select T Tools R Return The information of a photo file is automatically set. The Color information extracted from a photo file may be different from the user’s expectations. You can change the Color, and Preference. Photos for which information cannot be displayed are set as Unclassified. PTP does not support folder sort mode. ❑ Sorting Standard for the Photo List Basic View Shows the folders on the USB memory device. If you select a folder and press the ENTERE button, only the photo files contained in the selected folder are displayed. N When sorted according to the Basic View, you cannot set Favorite files. Timeline Sorts and shows photos by date. It sorts by year and month from the earliest photo. Color Sorts photos by color. You can change the photo color information. N To use this function, set the Use Color View in the Setup menus to On. N Color options: Red, Yellow, Green, Blue, Magenta, Black, Gray, Unclassified. Folder It sorts photos by folder. The photo file in the root folder is shown first and the others are shown in alphabetical order by name. Preference Sorts photos by preference (Favorites). You can change the photo preferences. N Changing the Favorites Settings. Select the desired photo in the Photo list, then press the Green button repeatedly until the desired setting appears. N Favorites options: ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★ N The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting. ❑ Photo List Tools Menu Slide Show You can play a Slide Show using the photo files on the USB memory device. Copy / Copy Current Group / Copy the selected file (When multiple files are selected) Select a photo you want to copy. (Alternatively, select multiple files by pressing the Photo Yellow button.) Press the TOOLS button to select Copy (or Copy Current Group / Basic View Copy the selected file). The files on the USB device are saved to the TV memory. N You can only copy the files saved on the USB device. N When the TV memory is full, files cannot be copied. Play Current Group You can play a Slide Show using only the photo files in the currently selected sorting group. USB Color ▶ ▶ Folder 1 Timeline Folder Preference 1 1 4/6 Slide Show Copy Play Current Group Change Group Info Copy Current Group Folder 2 IMG_0349 .JPG Device IMG_0335.JPG Favorites Setting Information ▼ Select T Tools R Return English - 40 BN68-02269A_Eng.indb 40 2009-03-31 오후 5:10:19 Change Group Info (When the Sort key is the Color) You can change a selected photo file’s (or group of files) color information in order to move it from one color group to another. N This does not change the actual color of the photo. N The group information of the current file is updated and the file is moved to the new group. N To change the information of multiple files, select the files you want by pressing the yellow button. Deselect All (When at least one file is selected) You can deselect all files. N The c mark indicating the corresponding file is selected is hidden. Information The photo file information including the name, the size, the resolution, the date modified and the path is displayed. O Alternatively, select a photo from the photo list and press the INFO button to view the information. Safe Remove You can remove the device safely from the TV. Viewing a Photo or Slide Show ❑ Viewing a Slide Show 1. Press the MEDIA.P button on the remote control to display the Media Play menu. 2. Press the ◄ or ► button to select Photo, then press the ENTERE button. 3. Press the ◄ or ► button to select the desired photo in the Photo list. 4. Press the TOOLS button. 5. Press the ▲ or ▼ button to select Slide Show, then press the ENTERE button. N All files in the photo list will be used for the Slide Show. N N N O r Normal IMG_0335.JPG USB 3648x2432 2009/3/15 E Pause lr Previous/Next T 1/4 Tools R Return During the slide show, files are displayed in order from the currently shown file. The Slide Show progresses in the order sorted in the Photo list. Music files can be automatically played during the Slide Show if the Background Music is set to On. (Refer to page 42). While a photo list is displayed, press the (Play)/ENTERE button on the remote control to start slide show. N Slide Show Control Buttons ENTERE Play/Pauses the Slide Show. Exit Slide Show and return to the photo list. Play the Slide Show. T TOOLS Pause the Slide Show. / Run various functions from the Photo menus. Change the SlideShow playing speed. ❑ Playing current group 1. Press the ◄ or ► button to select a sorting standard. (Basic View, Timeline, Color, Folder, Preference) 2. Press the (REW) or (FF) button to select the desired group. 3. Press the ▼ button twice, then press the TOOLS button. 4. Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button. ❑ Playing the selected photo files 1. Press the ◄ or ► button to select the desired photo in the Photo list. 2 . Press the yellow button. Repeat the above operation to select multiple photos. N The c mark ����������������������������������������������� appears to the left of the selected photo. N To deselect all selected files, press the TOOLS button and select Deselect All. 3. Press the (Play) / ENTERE button. N The selected files will be used for the slide show. English - 41 BN68-02269A_Eng.indb 41 2009-03-31 오후 5:10:19 ❑ Slide Show Tools Menu Stop Slide Show / Start Slide Show You can start or stop a slide show. Tools Slide Show Speed → Normal / Fast / Slow You can select the slide show speed only during the slide show. N You can also change the speed of the Slide Show by pressing the (FF) button during the Slide Show. (REW) or Stop Slide Show Slide Show Speed : Tools Normal Slide Show Effect : Fade1 Rotate Zoom Background Music Picture Setting Sound Setting Information Slide Show Effect You can set variously the slide show effect. • Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe, Random, None Rotate �� →� 0˚/ 90˚ / 180˚ / 270˚ You can rotate photos saved on a USB memory device. N Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚. N Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚. N The rotated file is not saved. Zoom �� →� x1 / x2 / x4 You can magnify photos saved on a USB memory device. N Press the ◄ or ► button repeatedly to increase or decrease the Zoom effect. N To move the enlarged photo image, press the ENTERE button, then press the ▲/▼/◄/► buttons. Note that when the enlarged picture is smaller than the original screen size, the location change function doesn’t work. N The enlarged file is not saved. Background Music You can set and select background music when watching a Slide Show. N To use this feature, there must be music on the USB device. N Loading music files is needed to change BGM mode. Play music files in music category to load. • Background Music �� →� Off / On • BGM Mode �� →� Mood / Selected File / Shuffle • BGM Mood �� →� Energetic / Rhythmical / Sad / Exciting / Calm N If you set BGM Mode to Mood, you can select the BGM Mood. • Select Music File N If you set BGM Mode to Selected File, you can select a music file. Picture Setting / Sound Setting Refer to page 48. Information The photo file information is displayed. Safe Remove You can remove the device safely from the TV. U Move E Enter e Exit English - 42 BN68-02269A_Eng.indb 42 2009-03-31 오후 5:10:20 Using and Sorting the Music List You can sort music files in the Music List by a particular standard. Music Preference Folder Basic View ▶ ▶ ▶ Title Artist 1 1 3/4 Carol kidd Mr A-Z ▶ 1. Press the MEDIA.P button on the remote control to display the Media Play menu. 2. Press the ◄ or ► button to select Music, then press the ENTEREbutton 3. Press the ▲ button twice, then press the ◄ or ► button to select a sorting standard. (Basic View, Title, Artist, Mood, Genre, Folder, Preference) N Music files are sorted according to the newly selected sorting standard. N To move to the previous/next group, press the (REW) or (FF) button. ▶ 2009 Pop NPKI usermanual 4. Press the ▼ button twice, then press the ENTERE button to start playing music in the order selected by the user. USB Device N The information of the music files is automatically set. N The Mood information extracted from a music file may differ from the expectations of the user. N You can change the Mood and Preference. N Music files for which information cannot be displayed are set to Unclassified. N If there is no title information for a music file, the filename is displayed. Heaven When I Dream ../ folder name/ Select T Tools R Upper Folder ❑ Sorting Standard for the Music List • Basic View:� Shows the folders of the USB memory device. If you select a folder and press the ENTERE button, only the music files contained in the selected folder are displayed. N When sorted according to the Basic View, you cannot set Favorite files. • Title: Sorts the Music titles in alphabetical order, and shows the music file. • Artist: Sorts the Music titles in alphabetical order, and shows the music file. • Mood: Sorts music files by the mood. You can change the music mood information. N Mood options: Energetic, Rhythmical, Sad, Exciting, Calm, Unclassified. • Genre: Sorts music files by the genre. • Folder: Sorts music files by the folder. The music file in the Root folder is shown first and the others are shown in alphabetical order by name. • Preference: Sorts music files by preference (Favorites). You can change the music files preferences. N Changing the Favorites Settings Select the desired music file in the Music list, then press the Green button repeatedly until the desired setting appears. N Favorites options: ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★ N The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting. ❑ Music List Tools Menu Copy / Copy Current Group / Copy the selected file (When multiple files are selected) Select the music to copy. (Alternatively, select multiple files by pressing the Yellow button.) Press the TOOLS button to select Copy (or Copy Current Group / Copy the selected file). The files on the USB device are saved to the TV memory. N You can only copy the files saved on the USB device. N When the TV memory is full, files cannot be copied. Music Preference Folder Basic View ▶ Play Current Group You can only play music files in the currently selected sorting group. ▶ Title Artist 1 1 3/4 Play Current Group Carol kidd Copy Mr A-Z Copy Current Group ▶ Information 2009 NPKI Pop NPKI usermanual ../ folder name/ Change Group Info (When the Sort key is Mood) USB You can change the mood information of music files. N The group information of the current file is updated and the file is moved to the new group. N To change the information of multiple files, select files by pressing the yellow button. Device Safe Remove Select Sky Heaven When I Dream T Tools Select T Tools RUpper Folder R Upper Folder Deselect All (When multiple files are selected) You can deselect all files. N The c mark indicating the corresponding file is selected is hidden. Information The music file information including the name, the size, the date modified and the path is displayed. O Alternatively, select a music file from the music list and press the INFO button to view the information. Safe Remove You can remove the device safely from the TV. English - 43 BN68-02269A_Eng.indb 43 2009-03-31 오후 5:10:20 Playing a Music ❑ Playing a music file r 1. Press the MEDIA.P button on the remote control to display the Media Play r 00:00:02 / 00:04:55 1/3 menu. r When I Dream 2. Press the ◄ or ► button to select Music, then press the ENTEREbutton 3. Pressing the ◄ or ► button to select a music file to be played. 4. Press the (Play)/ENTERE button. N This menu only shows files with the MP3 file extension. Files with other file extensions are not displayed, even if they are saved on the same USB device. E Pause lr Previous/Next T Tools R Return USB (REW) or (FF) buttons do not function during play. N N The selected file is displayed at the top with its playing time. N To adjust the music volume, press the ������ volume button on the remote control. To mute the sound, press the M MUTE button on the remote control. N If the sound is odd when playing MP3 files, adjust the Equalizer and SRS TruSurround HD in the Sound menu. (An overmodulated MP3 file may cause a sound problem.) N The playing duration of a music file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the file. r Geek In The Pink Heaven N Music Play Control Buttons ENTERE Play/Pauses the music file. Pause the music file Play the music file T TOOLS Run various functions from the Music menus. N Music function information icon When all music files in the folder (or the selected file) are repeated. Repeat Mode is On. When all music files in the folder (or the selected file) are played once. Repeat Mode is Off. ❑ Playing the music group 1. Press the ◄ or ► button to select a sorting standard. (Basic View, Title, Artist, Mood, Genre, Folder, Preference) 2. Press the (REW) or (FF) button to select the desired group. 3. Press the ▼ button twice, then press the TOOLS button. 4. Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button. ❑ Playing the selected music files 1. Press the ◄ or ► button to select the desired music file in the music list. 2. Press the yellow button. Repeat the above operation to select multiple music files. N The c mark appears to the left of the selected music file. N To deselect all selected files, press the TOOLS button and select Deselect All. 3. Press the (Play)/ENTERE button. N Only the selected file is played. ❑ Music Play Tools Menu Repeat Mode → On / Off You can play music files repeatedly. Picture Setting / Sound Setting Refer to page 48. Information The music file information is displayed. Safe Remove You can remove the device safely from the TV. Tools Repeat Mode Picture Setting Sound Setting Information Safe Remove U Move ◄ On Adjust ► e Exit English - 44 BN68-02269A_Eng.indb 44 2009-03-31 오후 5:10:21 Using and Sorting the Movie List 4. Press the ▼ button twice, then press the movie in the order selected by the user. (Play)/ENTERE button to play the Preference Basic View Timeline Tiltle Folder Apr ▶ ▶ Apr.27.2009 1/5 ▶ N The movie files are sorted according to the newly selected sorting standard. N To move to the previous/next group, press the (REW) or (FF) button. Movie ▶ 1. Press the MEDIA.P button on the remote control to display the Media Play menu. 2. Press the ◄ or ► button to select Movie, then press the ENTERE button 3. Press the ▲ button twice, then press the ◄ or ► button to select a sorting standard. (Basic View, Timeline, Title, Folder, Preference) ◀ You can sort movies in the Movie List by a particular standard. MOVIE_005 .avi MOVIE_000 .avi USB Device MOVIE_003 .avi MOVIE_001.avi Favorites Settings MOVIE_004 .avi Select T Tools R Upper Folder N The information of the movie files is automatically set. N You can change the Preference. ❑ Sorting Standard for the Movie List Basic View Shows the folders of the USB memory device. If you select a folder and press the ENTERE button, only the movie files contained in the selected folder are displayed. N When sorted according to the Basic View, you cannot set Favorite files. Timeline Sorts and shows movies by date. It sorts by year and month from the earliest movie. Title Sorts and displays the Movie titles in symbol / number / alphabet / special order. Folder If there are many folders in USB, the movies files are shown in order in each folder. The movie file in the root folder is shown first and the others are shown in alphabetical order by name. Preference Sorts movies by preference (Favorites). You can change the movie preferences. N Changing the Favorites Settings Select the desired movie file in the movie list, then press the Green button repeatedly until the desired setting appears. N Favorites options: ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★ N The stars are for grouping purposes only. For example, the 3 star setting does not have any priority over the one star setting. ❑ Movie List Tools Menu Play Current Group You can only play movie files in the currently selected sorting group. Movie Preference Basic View Timeline Tiltle Folder Copy / Copy Current Group / Copy the selected file (When multiple files are selected) Select the movie to copy. (Alternatively, select multiple files by pressing the Yellow button.) Press the TOOLS button to select Copy (or Copy Current Group / Copy the selected file). The files on the USB device are saved to the TV memory. MOVIE_001.avi N You can only copy the files saved on the USB device. Favorites Settings Select T Tools R Upper Folder N When the TV memory is full, files cannot be copied. USB Device Deselect All (When at least one file is selected) You can deselect all files. N The c mark indicating the corresponding file is selected is hidden. Information The movie file information including the order of the file in the current directory, the name, the size, the date modified and the path is displayed. O A��������������������������������������������������������������� lternatively, select a movie file from the list and press the INFO button to view the information. Safe remove You can remove the device safely from the TV. ▶ ▶ Apr Apr.27.2009 1/5 Play Current Group Copy Copy Current Group MOVIE_005 .avi Information MOVIE_000 .avi Safe Remove MOVIE_003 MOVIE_004 English - 45 BN68-02269A_Eng.indb 45 2009-03-31 오후 5:10:25 ▶ Playing a Movie File ❑ Playing a movie file r 00:00:02 / 00:01:55 r 1. Press the MEDIA.P button on the remote control to display the Media Play menu. 2. Press the ◄ or ► button to select Movie, then press the ENTERE button 3. Pressing the ◄ or ► button to select a movie to be played. 4. Press the (Play) / ENTERE button. 1/3 MOVIE_000.avi N The selected file is displayed at the top with its playing time. N The playing duration of a movie file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the file. USB E Pause lr Jump T Tools R Return N Press the ◄ button while playing a video file to rewind. N Press the ► button to fast forward. N Supported Video Formats File Extention Container *.avi AVI *.mkv MKV *.asf ASF *.wmv (VC1) *.mp4 MP4 (SMP4) *.3gp 3GPP *.vro (ps) VRO / VOB *.mpg *.mpeg (ps) others (ts) Video Decoder Divx 3.11 Divx 4.x Divx 5.1 Divx 6.0 XviD H.264 BP H.264 MP H.264 HP MPEG4 SP MPEG4 ASP Motion JPEG Divx 3.11 Divx 4.x Divx 5.1 Divx 6.0 XviD H.264 BP H.264 MP H.264 HP MPEG-4 SP MPEG-4 ASP Motion JPEG Divx 3.11 Divx 4.x Divx 5.1 Divx 6.0 XviD H.264 BP H.264 MP H.264 HP MPEG-4 SP MPEG-4 ASP Window Media Video v9 H.264 BP H.264 MP H.264 HP MPEG-4 SP MPEG-4 ASP XVID H.264 BP H.264 MP H.264 HP MPEG-4 SP MPEG-4 ASP MPEG2 MPEG1 MPE1 (Program Stream) MPE2 (Program Stream) MPEG2 (Transport Stream) H.264 (Transport Stream) Audio codec MP3, AC3, LPCM, ADPCM (MULAW ALAW) MP3, AC3, LPCM, ADPCM (MULAW ALAW), AAC WMA, MP3, AC3, LPCM, ADPCM, (MULAW ALAW), AAC ADPCM, (HE)-AAC, mp3 ADPCM, (HE)-AAC AC3, MPEG, LPCM AC3, MPEG, LPCM AAC, HE-AAC, MP3, DD+ VC1 (Transport Stream) English - 46 BN68-02269A_Eng.indb 46 2009-03-31 오후 5:10:25 N Supported caption formats Name File Extension Format MPEG-4(time-based text) SAMI SubRip SubViewer Micro DVD .ttxt .smi .srt .sub .sub or .txt XML HTML string-based string-based string-based DivX Certified products using Home Theater Test Kit v3.0 or later: Plays DivX® video, including premium content. N Video Play Control Buttons ENTERE Play/Pauses the movie file Play the movie file Pause the movie file Exit play mode and return to the movie list. T TOOLS ◄/► Run various functions from the movie menus. Skip forwards or backwards through the movie file. ▲ Move to the last view of the current file. ▼ Move to the first view of the current file. Play the file at double speed. This function may not be supported depending on the codec. ❑ Playing the movie group 1. Press the ◄ or ► button to select a sorting standard. (Basic View, Timeline, Title, Folder, Preference) 2. Press the (REW) or (FF) button to select the desired group. 3. Press the ▼ button twice, then press the TOOLS button. 4. Press the ▲ or ▼ button to select Play Current Group, then press the ENTERE button. ❑ Playing the selected movie files 1. Press the ◄ or ► button to select the desired movie file in the movie list. 2. Press the yellow button. Repeat the above operation to select multiple movie files. N The cmark appears to the left of the selected movie file. N To deselect all selected files, press the TOOLS button and select Deselect All. 3. Press the (Play)/ENTERE button. N Only the selected file is played. ❑ Playing movie continuously (Resume Play) If you exit playing movie function, the movie can played later from the point where it was stopped. 1.Select movie file you want to Play continuously by pressing ◄ or ► button to select it from the movie list. 2. Press the (Play)/ENTERE button. 3. Select Play continuously by pressing Blue button. N The movie will begin to play from where it was stopped. N If Continuous Movie Play Help in the setup menu was set On, a pop-up message will appear when you play movie file you want to Play continuously. (Refer to page 49) English - 47 BN68-02269A_Eng.indb 47 2009-03-31 오후 5:10:26 ❑ Movie Play Tools Menu Picture Setting / Sound Setting Refer to page 48. Picture Size Adjust the picture size for preference. • Fit: Play video at the TV screen size. • Original: Play video at the original size. Tools Picture Setting Sound Setting Picture Size Caption Setting Information Safe Remove Caption Setting You can play the movies with caption. • Caption: On / Off • Caption Size: Large / Small / Standard • Caption Sync: Adjusts the caption output time. • Caption Sync Reset: Resets the Sync to the default values. Information The movie file information is displayed. : U Move Fit Enter e Exit Safe Remove You can remove the device safely from the TV. Picture / Music Settings Using Media Play When watching a SlideShow or listening to music using Media Play, you can set the picture and sound. ❑ Picture Setting 1. Press the TOOLS button during a Slide Show or while music or movie is playing. 2. Press the ▲ or ▼ button to select Picture Setting, then press the ENTERE button. 3. Press the ◄ or ► button to select the Picture Mode (Dynamic, Standard, Eco, or Movie). 4. Press the ▲ or ▼ button to move to an item. (Contrast, Brightness, Color, Dynamic Contrast, Black Tone, or Reset) N Select Reset to initialize the picture settings. 5. Press the ◄ or ► button to adjust the settings. ❑ Sound Setting Picture Setting Picture Mode Contrast Brightness Color Dynamic Contrast Black Tone Reset ◄ Standard ► : 95 : 45 : 50 : Medium : Off U Move L Adjust Enter e Exit Sound Setting 1. Press the TOOLS button during a Slide Show or while music is playing. 2. Press the ▲ or ▼ button to select Sound Setting, then press the ENTERE button. 3. Press the ◄ o r ► button to select the Sound Mode. (Standard, Music, Movie, Clear Voice, or Custom) 4. Press the ▲ or ▼ button to move to an item. (Balance, 100Hz, 300Hz, 1KHz, 3KHz, 10KHz (Bandwidth Adjustment), or Reset) N Select Reset to initialize the sound settings. 5. Press the ◄ or ► button to adjust the settings. Sound Mode Balance 100Hz 300Hz 1KHz 3KHz 10KHz Reset ◄ Custom ► : L50 R50 : 0 : 0 : 0 : 0 : 0 U Move L Adjust Enter e Exit English - 48 BN68-02269A_Eng.indb 48 2009-03-31 오후 5:10:26 Using the Setup Menu Setup displays the user settings of the Media Play menu. 1. 2. 3. 4 . Press the MEDIA.P button on the remote control to display the Media Play menu. Press the ◄ or ► button to select Setup, then press the ENTERE button. Press the ▲ or ▼ button to select the desired option. Press the ◄ or ► button to select the option. Media Play Use Color View → On / Off Select to view the color information in the Photo menu. N If this is set to ON, the loading time increases for collecting the color information. Music Repeat Mode →� �� On / Off Select to repeatedly play music files. 148.48MB/149.00MB SETUP N To exit Media Play mode, press the MEDIA.P button on the remote control. USB : USB Photo USB Music Movie Setup Device e Exit Setup Use Color View ◄ Off Music Repeat Mode On Continuous Movie Play Help On Get the DivX® VOD registration code Get the DivX® VOD deactivation code Screen Saver Run Time 10 min Information Safe Remove Continuous Movie Play Help → �� On / Off Select to display the help pop-up message for continuous movie playback. Get the DivX® VOD registration code Shows the registration code authorized for the TV. If you connect to the DivX web USB Device site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD registration using Media Play, the registration is completed. N For more information on DivX® VOD, visit www.DivX.com. Move Adjust ► Return Get the DivX® VOD deactivation code When DivX® VOD is not registered, the registration deactivation code is displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated. Screen Saver Run Time →� �� 10 min / 20 min / 40 min / 1 hour Select to set the waiting time before the screen saver appears. Information Select to viewing the information of the connected device. Safe Remove You can remove the device safely from the TV. English - 49 BN68-02269A_Eng.indb 49 2009-03-31 오후 5:10:27 Media Play-DLNA Setting the DLNA Network DLNA allows you to watch videos and pictures saved on your PC on your TV through a network connection in Media Play mode. This removes the need to copy them to a USB storage device and then connect the device to your TV. To use DLNA, the TV must be connected to the network and the DLNA application must be installed on your PC. ❑ Network Connections for Media Play DLNA. PC TV LAN LAN External Modem (ADSL/VDSL/Cable TV) 1 2 3 1. Connect the LAN port on the rear panel of the TV to the external modem with a LAN Cable. 2. Connect the PC to which the DLNA PC Share Manager programme will be installed and the external modem using a LAN cable. 3. Connect the LAN port on the wall and the external modem with a Modem Cable. ❑ Connecting to the Network 1. When connecting to the network is complete, set up the network on the TV. N A Wireless Internet connection does not support DLNA. N Three parts(subnet address) before the TV and PC IP addresses should be same. The last part (host address) should be changed. (e.g. IP Address: 123.456.789.** ) 2. Run a Network Test to check the network settings. Installing the DLNA Application To play content on the PC on the TV, you have to first install the application. System Requirements 1. Insert the Programme CD supplied with this TV into your PC. 2. 20MB of free hard disk space is needed for the programme installation. N If you share files, up to 20MB of hard disk drive space is required for each 100 files. N If you cancel file sharing, the hard disk drive space used for the thumbnail information is also freed. Supported Formats 1. Image: JPEG (jpg, jpeg) 2. Audio: MP3 (mp3) 3. Video: MPEG1(mpg, mpeg), MPEG2 PS/TS(mpg, mpeg, trp, ts, tp), divx(mpg, mpeg, avi), MPEG4/H.264 (mpg, mpeg) English - 50 BN68-02269A_Eng.indb 50 2009-03-31 오후 5:10:27 Install the application 1. Run the Setup.exe file on the Programme CD supplied with the product. N Alternatively, you can download the file from www.samsung.com. 2. Install the SAMSUNG PC Share Manager as shown in the figures. ► ► ► ► ► 3. When the installation is complete, the PC Share Manager icon appears on your PC. N Double-click the icon to run the programme. English - 51 BN68-02269A_Eng.indb 51 2009-03-31 오후 5:10:28 Using the DLNA Application Programme Screen Display 1 2 3 4 8 5 6 1. 2. 3. 4. 5. 6. 7. 8. 7 Menus: File, Share, Server, and Help. Click to share the selected PC server folder. Click to cancel sharing. Click to refresh the PC folder and files. Click to synchronize the share status. The folders and files of the PC to be shared are listed. Folders shared by the user are listed. PC server name shown on the device list of the Media Play. ❑ File Property: Shows information on the selected file or folder. • Method 1: Select a file or folder and select the File menu and then select the Property sub-menu. • Method 2: Select a file or folder, right-click over the selected file or folder and then select Property from the pop-up menu. <Method 1> Name Name Name Name <Method 2> Name Name Name Name Name Name Name Name Modified Modified Modified Modified Exit: Exits the DLNA application. If you select Exit without applying the changes after changing the shared status, a message will appear asking if you want to apply the changed settings to the PC. Select Yes to apply the changes and exit the application. Name Name Name Name Yes Yes Yes Yes No No No No English - 52 BN68-02269A_Eng.indb 52 2009-03-31 오후 5:10:29 ❑ Share Sharing a Folder You can share a folder from your PC to the TV. The maximum number of folders that can be shared is 32. N Your PC will operate as a server to the TV. • Method 1: Select a folder in My Computer, select the Share menu and then select the Share Folder sub-menu. • Method 2: Select a folder in My Computer, right-click over the selected folder and then select Share Folder from the pop-up menu. • Method 3: Locate the mouse pointer over a folder in the My Computer folder list in the left pane and drag&drop the folder into the Shared Folders pane. If a message appears asking you to confirm the shared folder, select Yes. <Method 1> <Method 2> <Method 3> Cancelling a Shared Folder You can cancel a shared folder on your PC. Select a folder from the Shared Folder pane and select Unshare Folder. • Method 1: Select a folder from the Shared Folder pane, select the Share menu and then select Unshare Folder. • Method 2: Select a folder from the Shared Folder pane, right-click over the selected folder and then select Unshare Folder from the pop-up menu. • Method 3: Locate the mouse pointer over a folder in the Shared Folder pane and drag&drop the folder into the My Computer pane. If a message appears asking you to confirm the cancelation, select Yes. <Method 1> <Method 2> <Method 3> Applying the Current Settings Perform this when synchronization is necessary due to a new shared folder or canceling a shared folder. The Set Changed State menu applies changes to shared folders to the data saved with the PC share programme. Since applying changes to the internal data is a time-consuming process, this function enables users to apply changes to the data only when required. Until the Set Changed State menu is selected, the changed state of the shared folder is not applied to the server. Changes to the shared folders are not applied to your PC until you select the Set Changed State menu. • Method 1: Select the Share menu and select the Refresh DB sub-menu. • Method 2: Click the Set Changed State icon. English - 53 BN68-02269A_Eng.indb 53 2009-03-31 오후 5:10:30 Setting the Access Permission To enable the TV to find your PC, the TV must be set to Set Device Policy in the Access Permission Settings window. In addition, the PC server and the TV must be on the same subnet. • Method: Select the Share menu and select Set Device Policy. Rejected items are represented in gray. You can change the access permissions by using the Allow Accept / Deny button. To delete an item, select the item and select Delete Item. ❑ Server Server You can run or stop using your PC as a server. Start Server at Windows start You can determine whether to start the PC server automatically when Windows starts. Change server name You can rename the PC server. Enter a new name and click OK. The new name will appear at the top right of the window and will appear on the TV. ❑ Help Version The programme version information message box appears. English - 54 BN68-02269A_Eng.indb 54 2009-03-31 오후 5:10:30 Using the DLNA Function ❑ Using the DLNA Menu DLNA (Digital Living Network Alliance) enables content saved on a DLNA server (usually your PC) connected to your TV or over a network to be played. Media Play Media Play enables playing content saved on a USB memory device connected to the TV, while DLNA enables playing content saved on a DLNA server (your PC) connected to your TV or over the network. The procedures to use the content are the same as those for Media Play. N If you install the PC share manager programme supplied with the TV onto a PC, USB : USB 148.48MB/149.00MB PHOTO Photo Music Movie Setup Return USB Device you can have the PC perform the role of a DLNA server over the network. 1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. 2. Press the ▲ or ▼ button to select Media Play (USB & DLNA), then press the ENTERE button. 3. Press the ◄ or ►button to select an icon (Photo, Music, Movie, Setup), then press the ENTERE button. N DLNA does not support the following functions. - The Background Music and Background Music Setting functions. Sorting files by preference in the Photo, Music, and Movie folders. The Change Group Info function. The Copy / Delete function. The Safe Remove function. The (������� REW) / (���� FF) button functions while a movie is playing. Function to watch continuously when playing movie. N The Skip (◄/► button) or Pause function may not work while a movie is playing for the DLNA of other manufacturers, N N N N depending on the corresponding content information. The playing time may not be displayed while a movie is playing. The Skip function may not work with some folders such as asf and mkv. The Divx DRM, Multi-audio, embedded caption does not supported. Samsung PC Share manager should be permitted by the firewall program on your PC. English - 55 BN68-02269A_Eng.indb 55 2009-03-31 오후 5:10:30 Anynet+ Connecting Anynet+ Devices The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable. ❑ To connect to a TV 1. Connect the HDMI IN (1, 2(DVI), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. TV Anynet+ Device 1 HDMI 1.3 Cable Anynet+ Device 2 HDMI 1.3 Cable Anynet+ Device 3 HDMI 1.3 Cable Anynet+ Device 4 HDMI 1.3 Cable ❑ To connect to a Home Theater 1. Connect the HDMI IN (1, 2(DVI), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. 2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI cable. TV Anynet+ Device 1 Home Theatre Optical Cable HDMI 1.3 Cable HDMI 1.3 Cable Anynet+ Device 2 Anynet+ Device 3 Anynet+ Device 4 HDMI 1.3 Cable HDMI 1.3 Cable HDMI 1.3 Cable N Connect an Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the Home Theater. N When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home N N N N Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Blu-ray Player or Cable / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theater, not the TV. Connect only one Home Theater. Some HDMI cables may not support Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. Continued... English - 56 BN68-02269A_Eng.indb 56 2009-03-31 오후 5:10:31 Setting Up Anynet+ ❑ Setting Up Anynet+ The following settings help set the Anynet+ functions. Application Anynet+ enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. Media Play (USB & DLNA) Anynet+ (HDMI-CEC) ► Content Library Internet@TV Home Network Centre T Press the TOOLS button to display Tools menu. + You can also display Anynet+ menu by selecting Tools → Anynet (HDMI-CEC). Anynet+(HDMI-CEC) → Off / On To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On. N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Auto Turn Off → No / Yes If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. N If an external device is still recording, it may or may not turn off. Anynet+(HDMI-CEC) : On Auto Turn Off : Yes U Move ▶ E Enter R Return Switching between Anynet+ Devices 1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). 2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button. N Anynet+ devices connected to the TV are listed. If you cannot find a device you want, press the red button to scan for devices. N Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List menu appears. 3. Press the ▲ or ▼ button to select to a particular device and press the ENTERE button. It is switched to the selected device. View TV Device List Recording DVDR MENU DVDR INFO Receiver Setup : DVDR : On U Move E Enter R Return N Switching to the selected devices may take up to 2 minutes. N The time required to scan for devices is determined by the number of connected devices. N Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV may not always be automatically displayed in the device list. Press the red button to search for the connected device. N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button. ❑ Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Anynet+ mode changes to TV broadcast mode. Device List Shows the Anynet+ device list. (device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear. (device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear. Recording: (*recorder) Starts recording immediately. (This menu works only for a device supporting recording.) Reserve Recording Enables reserving a recording for the recorder. Stop Recording: (*recorder) Stops recording. Receiver Sound is played through the receiver. Setup Sets up the Anynet+ (HDMI-CEC) function. N If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name). Continued... English - 57 BN68-02269A_Eng.indb 57 2009-03-31 오후 5:10:32 ❑ TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status Available Buttons Anynet+ Device After switching to the device, when the menu of the corresponding device is displayed on the screen. Numeric buttons ▲/▼/◄/►/ENTERE buttons Color buttons / EXIT button After switching to the device, while playing a file (Backward search) / (Play) / (Pause) Device with builtin Tuner After switching to the device, when you are watching a TV programme CH Audio Device When Receiver is activated VOL / button M MUTE button N N N N N / (Forward search) (Stop) / button The Anynet+ function only works when the active source on the TV remote control is set to TV. The button works only while in the recordable state. You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control. The TV remote control may not work under certain conditions. In this occurs, reselect the Anynet+ device. The Anynet+ functions do not operate with other manufacturers’ products. The , operations may differ depending on the device. Recording You can make a recording of a TV programme using a Samsung recorder. 1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). 2. Press the ▲ or ▼ button to select Recording(recorder): then press the ENTERE button. Recording begins. N When multiple recording devices are connected, the recording devices are listed. View TV Device List Recording DVDR MENU DVDR INFO Receiver Setup : DVDR Press the ▲ or ▼ button to select a recording device and press the ENTERE button. Recording begins. : On N When the recording device is not displayed, select Device List and press the red button to search devices. U Move E Enter R Return N Pressing the button will record whatever you are currently watching. If you are watching video from another device, the video from the device is recorded. N Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to a recording device. English - 58 BN68-02269A_Eng.indb 58 2009-03-31 오후 5:10:33 Listening through a Receiver You can listen to sound through a receiver instead of the TV speaker. 1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC). 2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off. N If your receiver supports audio only, it may not appear in the device list. N The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV. N When the receiver (home theater) is set to On, you can hear sound output from the View TV Device List Recording DVDR MENU DVDR INFO Receiver Setup : DVDR : On U Move E Enter R Return TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. N When using the Media Play (USB & DLNA) feature, sound may not output properly through the receiver. N When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus. N If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure), the Speaker Select may be set to External Speaker when you turn the TV on again. (see page 30) Troubleshooting for Anynet+ Symptom Anynet+ does not work. I want to start Anynet+. Solution • • • • • • • • • • • • I want to exit Anynet+. • • The message Connecting to Anynet+ device... appears on the screen. The Anynet+ device does not play. • The connected device is not displayed. • • • • • The TV programme cannot be recorded. The TV sound is not output through the receiver. • • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. Connect only one receiver (home theater). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether it is Anynet+ exclusive remote control. Anynet+ doesn’t work in certain situations. (Searching channels, Plug & Play, etc.) When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or turn your TV off and on again. Check if the Anynet+ Function of Anynet+ device is set on. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want. Select View TV in the Anynet+ menu. Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control when the Anynet+ setting or switching to view mode is complete. You cannot use the play function when Plug & Play is in progress. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI 1.3 cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Search Anynet+ devices again. You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not support Anynet+ functions. • If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power failure, please repeat the device scan. • Check whether the antenna jack on the recording device is properly connected. • Connect the optical cable between TV and the receiver. English - 59 BN68-02269A_Eng.indb 59 2009-03-31 오후 5:10:33 Content Library Activating the Content Library The Content Library enables you to view or play the built-in contents on the TV or stored on your USB device. The Delete, Move and Update functions will not work with the built-in content on the TV. Media Play (USB & DLNA) Application 1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. 2. Press the ▲ or ▼ button to select Content Library, then press the ENTERE button. The Content Library main menu is displayed. Anynet+ (HDMI-CEC) Content Library Internet@TV Home Network Centre O Press the CONTENT button on the remote control to display the Content Library main menu. 3. Press the ◄ or ► button to select an icon (Gallery, Cooking, Children, Wellness, Others, Content Management), then press the ENTERE button. Content Library N The selected item will be run. Gallery < Gallery Cooking Children Wellness Others Return > Exit ❑ Using the Remote Control Button in Content Library Menu Button Operations ▲/▼/◄/► Move the cursor and select an item. ENTERE Select the currently selected item. RETURN Return to the previous menu. EXIT Stop the current function and return to the Content Library main menu. Color Button Button that provide functions are described on the corresponding page. VOL You can control the volume of the played content. CONTENT Enter or Exit Content Library mode. N If you press the Volume or MMUTE button, no OSD is displayed, but the function operates accordingly. button on the remote control. N To return to TV mode, press the CH N CONTENTS LIBRARY CONTAINS TEXT, GRAPHICS, IMAGES, MULTIMEDIA, AND OTHER MATERIALS FOR INFORMATIONAL AND PROMOTIONAL PURPOSES ONLY. MATERIALS IN CONTENTS LIBRARY HAS BEEN MODIFIED AND KEEPS BEING REVISED AND UPDATED. THE MATERIALS IN THE CONTENTS LIBRARY MAY NOT BE SUITABLE FOR ALL AUDIENCES. N INFORMATION IN THE CONTENTS LIBRARY IS PROVIDED “AS IS.” ALTHOUGH THE INFORMATION PROVIDED TO YOU IN THE CONTENTS LIBRARY IS OBTAINED OR COMPLIED FROM SOURCES WE BELIEVE TO BE RELIABLE, SAMSUNG CANNOT AND DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS OR COMPLETENESS OF ANY INFORMATION OR DATA MADE AVAILABLE TO YOU FOR ANY PARTICULAR PURPOSE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE HELD LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES WHATSOEVER ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR THE USE OF, THE CONTENTS LIBRARY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. English - 60 BN68-02269A_Eng.indb 60 2009-03-31 오후 5:10:33 Using the Content Library ❑ Gallery� This function plays a Slide Show with high resolution images and background music and pro­duces various atmospheres. Using the Gallery function of the TV, you can change your home at­mosphere. N Press INFO button to see the credit and detail information in English for the imagery (currently, the credit supports English only). N You can pause the slide show by pressing the ENTERE button during a slide show. N The copyrights of the Gallery contents and all issues related to them are reserved by Timespace / JoongAng M&B, Inc. ❑ Cooking You can view various recipes that you can then easily follow step by step. Enjoy these contents which give you great ideas for meals. N The recipes introduced in the Cooking contents on the Samsung TV are based on recipes published by Anness Publishing. N The copyrights of the Cooking contents and all issues related to them are reserved by Practical Pictures. ❑ Children This is educational and interactive content that children can watch repeatedly. Enjoy existing stories, songs and plays with the Boowa and Kwala characters. N The copyrights of the Children contents and issues related to them are reserved by UpToTen. ❑ Wellness� This is beneficial health management content that provides stretching and massage exercises that can be enjoyed by the whole family. ❑ Others This is content not saved in the TV and is accessible when the TV is connected to a network. N You can copy new content to the TV memory using the Content Management screen. ❑ Content Management You can add or delete contents using the Content Management. My contents The use of contents is the same as in using the TV memory contents. Also, you can delete and play the each contents. - Select a content item and press the ENTERE button. You can play or delete the selected content item. Internet Download If your TV connect to the internet via a LAN cable, you can directly download the contents provided by Samsung Electronics. - Select a content item and press the ENTERE button. You can download content or view detailed content information USB You can check the content saved on the USB device for each sub item of the Content Library. - Select a content item and press the ENTERE button. Then, you can view the menu. If you select Copy, you can copy the content to the TV memory. N Content Library supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport��������� device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.) N Playing a game using an external USB memory device will allow you to save your game (depending on the game). Take care as removing the USB memory device while saving data to the USB memory device may cause the data to be lost. N Downloading New Contents New content other than the built-in contents will be provided via the Samsung.com website free of charge. When you download the paid contents, you need UDN number to download contents. Check the UDN number before downloading a new content item. 1. Visit the www.samsung.com website. 2. Select a content item in the Contents Download page. 3. Download the contents onto the USB memory device. 4. Go to Content Library main menu by pressing CONTENT button or choosing Content Library (Menu → Application →� �� Content Library) 5. Plug the USB memory into USB port on the side of the TV. 6. You can see the content sub item which you downloaded. 7. Select a content item and press the enter button. 8. You can play the selected content item or copy it to the TV memory Setup • Screen Saver Run Time → 10 min. / 20 min. / 40 min. / 1 hour Select to set the waiting time before the screen saver appears. • Save UDN (Unique Device Number) The 18-digit number on the screen is the product code. You can save the UDN to your USB memory. N An NTFS format USB storage device does not support saving UDN.We recommend using a FAT format USB storage device. English - 61 BN68-02269A_Eng.indb 61 2009-03-31 오후 5:10:34 Network Network Connection Network Connection is for DLNA, Contents Library-Internet download, Internet@TV and Home Network Centre. ❑ Network Connection - Cable LAN Connection for a DHCP Environment The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually. TV Rear Panel The Modem Port on the Wall External Modem (ADSL/VDSL/Cable TV) 1 LAN Cable 2 Modem Cable 1. Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable. 2. Connect the LAN port on the wall and the external modem with a Modem Cable. You can connect the LAN via a Sharer (Router). IP Sharer The Modem Port on the Wall External Modem (ADSL/VDSL/ Cable TV) LAN Cable TV Rear Panel LAN Cable Modem Cable You can connect the LAN port and the TV directly depending on your network status. TV Rear Panel The LAN Port on the Wall LAN Cable N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. N If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds and then try again. N For the connections between the external modem and the Sharer (Router), refer to the owner’s manual of the corresponding product. N You can connect the TV to the LAN directly without connecting it through a Sharer (Router). N You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic- connection-type ADSL modem. English - 62 BN68-02269A_Eng.indb 62 2009-03-31 오후 5:10:36 LAN Connection for Static IP Environment The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP). TV Rear Panel The LAN Port on the Wall 1 LAN Cable 1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable. You can connect the LAN via a Sharer (Router). The LAN Port on the Wall IP Sharer LAN Cable TV Rear Panel LAN Cable N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. N If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. N N N N You must enter these values to complete the network settings. If you do not know the values, ask your network administrator. For the information on how to configure and connect a Sharer (Router), refer to the owner’s manual for the corresponding product. You can connect the TV to the LAN directly without connecting it through a Sharer (Router). If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP. For the procedures to use a static IP address, ask your Internet Service Provider. Continued... English - 63 BN68-02269A_Eng.indb 63 2009-03-31 오후 5:10:38 ❑ Network Connection - Wireless You can connect to the network wirelessly through a wireless IP sharer. TV Side Panel The LAN Port on the Wall Samsung Wireless LAN Adapter Wireless IP sharer LAN Cable 1. Connect the ‘Samsung Wireless LAN Adapter’ into the USB1(HDD) or USB2 terminal of the TV. N You must use the ‘Samsung Wireless LAN Adapter to use a wireless network. N Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers, Ecommerce sites and Samsungparts.com. N To use a wireless network, your TV must be connected to a wireless IP sharer. N If the wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. N Samsung’s Wireless LAN adapter supports IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, IEEE 802.11N. When you play DLNA video over IEEE 802.11B/G connection, the video may not be played smoothly. N If the wireless IP sharer allows you to turn the Ping connection function on/off, turn it on. N Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently being used by another device nearby, this will result in interference and communications may fail. N If you apply a security system other than the systems listed below, it will not work with the TV. - When applying the security key for the AP (wireless IP sharer), only the following is supported. 1) Authentication Mode : OPEN, SHARED, WPAPSK, WPA2PSK 2) Encryption Type : WEP, TKIP, AES - When applying the security key for the Ad-hoc mode, only the following is supported. 1) Authentication Mode : SHARED, WPANONE 2) Encryption Type : WEP, TKIP, AES N If your AP supports WPS(Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN (Personal Indentification Number). WPS will automatically configure the SSID and WPA key in either mode. N If the device isn’t certified, it may not connect to the TV via the ‘Samsung Wireless LAN Adapter’. English - 64 BN68-02269A_Eng.indb 64 2009-03-31 오후 5:10:39 Network Setup ❑ Network Type Setup Select Cable or Wireless as the method to connect to the network. N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. ��������������������������������� to network using a cable. • Cable: Connect ������������������������������ to network wirelessly. • Wireless: Connect : Off BD Wise : On Network Type : Cable V-Chip Caption Energy Saving Cable Network Setup (when Network Type is set to Cable) ► Network Setup Melody ❑ Network Setup Game Mode : Medium : Off PIP N Please check if the LAN cable is connected. �� Auto Setup / Manual Setup • Internet Protocol Setup →� ����������������������������������������������������������������������������������� can test or confirm the network connection status after setting up the network. • Network Test: You N When unable to connect to a wired network If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC). In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet using an Internet Sharer (Router). The internet connection may failure to a firewall problem. In this case, contact your Internet service provider. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics at 1-800-SAMSUNG. ❑ Cable Network Setup Cable Network Setup-Auto Setup If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured. 1. Set Network Type to Cable. 2. Select Cable Network Setup. 3. Set Internet Protocol Setup to Auto Setup . N The Internet Protocol is set automatically. 4. Select Network Test to check the network connectivity. Cable Network Setup-Manual Setup To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP). N Please check if the LAN cable is connected. (See page 62) 1. Set Network Type to Cable. 2. Select Cable Network Setup. 3. Set Internet Protocol Setup to Manual Setup. 4. Set up IP Address, Subnet Mask, Gateway and DNS Server. N Press the number buttons on the remote control when you set the Network manually. 5. Select Network Test to check the network connectivity. ❑ Wireless Network Setup N The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. (See page 64) �� Auto Setup / Manual Setup • Internet Protocol Setup →� • Network Test: You can test or confirm the network connection status after setting up the network. N When unable to connect to an AP Your TV may fail to locate an AP that is configured as a private SSID type. In this case, please change the AP settings and try again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the first time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to the Internet as the MAC address differs from that of the device (PC). In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a Samsung Electronics at 1-800-SAMSUNG. English - 65 BN68-02269A_Eng.indb 65 2009-03-31 오후 5:10:39 Select a network - Access Point: You can select the IP sharer to use when using a wireless network. N If a wireless network is not in the Select a network list, press the Red button. N When the connection is made, you will be returned to the screen automatically. N If you have selected an Access Point with a security authentication: The Security Key input screen appears. Enter the security key and press the Blue button on the remote control. N If security encryption type is WEP, 0~9, A~F will be available when you input security key. Button Moves the selection up/down/left/right. ENTER Enters (Inputs) the selected character. Red button Switch between Upper- and Lower-Case Letters Blue button A H O V B C I J P Q W X D K R Y n Move E L S Z F M T G N U 0~9 * * * * * Number Lowercase Delete Done Number E Enter R Return You can delete an already entered character. Press this button to finish entering the security key. ❑ Connecting WPS (Wi-Fi Protected Setup) _ Security * Key Operations ▲/▼/◄/► Green button Wireless* Network*Setup If Security Key is already set: In access point list, select WPS. N You can select PBC, PIN, Security Key. Wireless* Network Setup Select* a* network * Search * Ad-hoc 3/9 AP_1 AP_2 AP_3 AP_4 PBC PIN Security Key * n Move E Enter R Return • Connecting by using PBC: Select a PBC (Push Button Configuration). Press the PBC button on the AP (access point) within 2minutes, and wait for connection. Press the PBC button on the access point. * : AP_3 Access Point Name Cancel • Connecting by using PIN: Select a PIN (Personal Identification Number). N The message showing the PIN Code is displayed. Input the PIN Code at AP device within 2minutes. Select OK and wait for connection. N Try again if connecting operation doesn’t work N When the connection is not established although tried again, reset the access point. Please refer to a manual of each access point. • Connecting by using Security Key: When selecting Security Key, the input window is displayed. Input the security key and press Blue button. N Try again if connecting operation doesn’t work. Press OK After input TV’s Pincode in the access point’s setup. Access Point Name : AP_3 PIN Code : 12345678 OK Wireless* Network*Setup _* Security * Key A H O V B C I J P Q W X D K R Y n Move If Security Key is not set: When the security setting of AP that supports WPS is NONE, you can select PBC, PIN, None Security. None Security is capable of connecting to AP directly without using WPS function. N Process of PBC, PIN is same as above. Refer to if Security Key is already set. N Try again if connecting operation doesn’t work. Cancel E L S Z F M T G N U 0~9 * * * * * Number Lowercase Delete Done Number E Enter R Return Wireless* Network Setup Select* a* network * Search * Ad-hoc 3/9 AP_1 AP_2 AP_3 AP_4 PBC PIN Security Key * n Move E Enter R Return English - 66 BN68-02269A_Eng.indb 66 2009-03-31 오후 5:10:40 Ad-hoc: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter’ by using a peer to peer network. • How to connect to new Ad-hoc The existing network system may have limited 1. Choose Select a network, then a device list is displayed. functionality. Do you want to change the network 2. While in the device list, press the Blue button on the remote or select Ad-hoc. connection? N The message The existing network system may have limited functionality. No Yes Do you want to change the network connection? is displayed. 3. Input the generated Network Name(SSID) and Security Key into the device you want to connect. • How to connect an existing Ad-hoc device 1. Choose Select a network, the device list is displayed. * 2. Select the device you want in the Device list. 3. If security key was applied, input the security key again. N If network doesn’t operate normally, please check the Network Name(SSID) and Security Key again. If the Security Key is incorrect, it may be the reason for the malfunction. Wireless Network Setup - Auto Setup If you want to connect AP, AP should support DHCP. Only devices which support Ad-hoc mode can be connected without DHCP. 1. Set Network Type to Wireless. 2. Select Wireless Network Setup. 3. Set Internet Protocol Setup to Auto Setup. N The Internet Protocol is set automatically. 4. Select a network through Select a network. 5. Select Network Test to check the network connectivity. Wireless Network Setup - Manual Setup 1. Set Network Type to Wireless. 2. Select Wireless Network Setup. 3. Set Internet Protocol Setup to Manual Setup. 4. Set up IP Address, Subnet Mask, Gateway and DNS Server. N Press the number buttons on the remote control when you set the Network manually. 5. Select a network through Select a network. 6. Select Network Test to check the network connectivity. English - 67 BN68-02269A_Eng.indb 67 2009-03-31 오후 5:10:40 Internet@TV You can use various internet services containing useful information and entertaining content. If you have some problems while using a widget service, please contact to content provider. In the widget, press the green button and get information of contact or refer to help website for widget provider information. N English may be only supported in widget service depending on region. N This function may not be supported depending on your country. All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or ther intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device. YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE AND ACCURACY IS WITH YOU. THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. SAMSUNG EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT AND SERVICES, EITHER EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT, AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT WARRANT THAT THE DEVICE, CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time, without notice, and Samsung makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content or service made available through this device. Samsung may impose limits on the use of or access to certain services or content, in any case and without notice or liability. Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers. English - 68 BN68-02269A_Eng.indb 68 2009-03-31 오후 5:10:41 Getting Started with Internet@TV Internet@TV provides an integrated Internet and television experience powered by the Yahoo!® Widget Engine. You can monitor financial stocks, share photos with friends and family, and track news and weather all through the Internet@TV service on your television. N You may experience slow operation or hesitation when using this function due to network conditions. When running Internet@TV for the first time, the basic settings will proceed automatically. N The first step is to set up your network. For more information on how to configure your network, refer to ‘Network Setup’. N After your network is operational, the Internet@TV software guides you through a step-by-step setup wizard. ❑ What is a Widget? A TV Widget is a small web application that allows you to easily access your favorites site using the remote control. You can enjoy various types of information, such as the latest news, weather information, and stock information, etc. on your TV along with your friends or family members. N Some widgets may not be supported depending on the regulations of the corresponding country. N Some widgets will only support limited services depending on the regulations of the corresponding country. N The color buttons may work differently depending on the widget. N The operation may not be smooth depending on the network condition. N The Snippet is a symbol of Widget. ❑ What is a Snippet? A snippet shows a part of the Widget contents such as weather and stock information that the user wants to view. N The snippets are automatically updated in real time. N It may take a few seconds to load the snippet. 1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button. 2. Press the ▲ or ▼ button to select Internet@TV, then press the ENTERE button. N INTERNET@TV starts. O Press the INTERNET@ button on the remote control to display the Internet@TV menu. 3. The General Disclaimer is displayed on the screen. Select I accept or I do not accept. N For more information on the General Disclaimer, refer to the ‘Legal Notice’. 4. The ‘welcome screen’ is the starting point of the Internet@TV guided setup. N If you select Exit Setup, this step is resumed when you press the INTERNET@ button. N Select Let’s get started! 5. Choosing your location allows TV Widgets to use localized content. N Select your country from the list provided. 6. Accepting the Yahoo!® TV Widget Engine Privacy Policy is required to use Internet@TV. N Select OK, I Accept. 7. Accepting the Yahoo!® TV Widget System Terms of Service is required to use Internet@TV. N Select OK, I Accept. 8. Enter your name to setup your profile. Each profile has its own list of widgets. You can create a profile for each person who uses Internet@TV. N Enter your name and select Save this name. N For more information, refer to page ‘Using the Profile Widget'. 9. Internet@TV tests the network connection. N If the test fails, configure your network again. N For more information, refer to page ‘Network Setup’. a b c d e f g h i j k l m n o p q r s t u v w x 1 2 3 4 5 6 .@# áëí y z 0 7 8 9 space 10.The guided setup is complete. A tutorial on how to use Internet@TV is next. N Select Continue to view the tutorial. N Select Exit setup to start using Internet@TV now. N T��������������������������������� o run the tutorial again, select Profile Widget → System Setting → Repeat Tutorial. 11. Press the INTERNET@ button on the remote control to display the Internet@TV user interface. English - 69 BN68-02269A_Eng.indb 69 2009-03-31 오후 5:10:41 ❑ Screen display Dock mode 1 A welcome banner is shown with your profile name in the top right corner. N This banner disappears after a short delay. 2 The banner highlights two remote control shortcuts. N If you press the blue button (Viewport) on your remote control, the display is toggled between ‘Viewport mode’ and ‘Overlay mode’. In Viewport mode, the TV or video plays in a scaled-down area with graphics outside. In overlay mode, the graphics are displayed on top of the TV or video. N If you press the yellow button (Edit Snippet) on your remote control, a help window is displayed and the snippet with focus can be edited. 3 Press the INTERNET@ button on the remote control to begin. N The horizontal list at the bottom of your TV screen is called ‘the dock’. N The items in the list are called ‘snippets’. N A snippet is a shortcut which launches a TV Widget. N A TV Widget is an Internet application designed to run on your TV. N Move between snippets by pressing the ◄ or ► buttons on the remote control. N Focus is located in the left most region (highlighted in blue). N The dock slides snippets under that focal point. N Launch a TV Widget by pressing the ENTERE button on the remote control when its snippet is in focus. N When you add snippets, they form a stack which you can navigate by pressing the ▲ or ▼ buttons. N Two special TV Widgets appear in the dock: the Profile Widget and the Gallery Widget. These cannot be deleted. N The dock will slide off screen after a timeout period. Sidebar mode 1 Focus on a snippet and press the ENTERE button to launch the TV Widget sidebar. The TV Widget logo and Home ( ) are at the top of the sidebar. 2 Current menu is displayed under the TV Widget logo. N To return to a previous screen, select it and press the ENTERE button. N You can also press the RETURN button on the remote control. 3 Current selection is always highlighted in blue. The highlighted button has focus and is activated when you press the ENTERE button. 4 When there is a lot of data, a page control is used. N Current page and total pages are displayed. N Move between pages by pressing ◄ or ► buttons. 5 The bottom toolbar includes color buttons that correspond to the red, green, yellow and blue buttons on the remote control. • Red button: Close the widget. • Green button: Change the widget’s setting. • Yellow button: Manage your snippets. • Blue button: Size video to fit, or make it full screen. N Some buttons may not be available depending on widget. English - 70 BN68-02269A_Eng.indb 70 2009-03-31 오후 5:10:42 Editing Snippets in the Dock 1. Edit a snippet by focusing on it in the dock and pressing the yellow button. 2. The snippet moves to the Second position and its tile slides up to show the following help text: • Delete (red button): Remove this TV Widget. N Deleted widgets can be re-installed using the Widget Gallery. • Move (blue button): Re-order the snippet. Press the ◄ or ► button to scroll. Press the yellow button to drop into the new position. • Done (yellow button): Exit the Edit Snippet menu. Using the Profile Widget The Profile Widget configures your user profile.You can set up multiple profiles, and each profile maintains its own list of widgets. The Switch Profile menu allows you to switch to a different user profile. N At least two profiles must be registered. If you want to add a profile, refer to ‘Administrative Controls’. The Profile Settings menu allows you to customize and protect your profile. • User profiles can be customized with a unique Name and an Avatar (a picture used to represent your profile). • Your profile’s Name and Avatar are displayed in the profile snippet in the dock. • Profiles can be protected by Create Profile PIN. N When setting the PIN for the first time, you can set a Security Question. The Profile Settings menu can limit to widgets. • If you forget your Profile PIN you can answer a Security Question that is associated with your profile. • A profile that has the Limit Profile indicator turned on will not allow new widgets to be installed. N The Owner PIN must be set to use this function. To set the Owner PIN, refer to ‘Administrative Controls’. English - 71 BN68-02269A_Eng.indb 71 2009-03-31 오후 5:10:42 The System Settings menu allows you to: • Change your Location and set your Zip Code (US only) to tailor the content to your region. • Repeat the Tutorial that was shown during guided setup. • Restore Factory Settings to delete all widget configurations and information. In the Administrative Controls menu you can: • • • • Set the Screen Saver timeout to avoid screen burn in. Create Owner PIN and set a Security Question to control other profiles. Create a new Profile which can be configured with a different set of widgets. Delete an existing profile. From the Profile Widget you can Sign in to Yahoo!® using your Yahoo! ID. • • • • If you have a Yahoo! ID, you can access your personalized content using the Yahoo! TV Widgets. All Yahoo! TV Widgets that are installed are automatically signed-in with your profile’s Yahoo! ID. If you have no Yahoo! account, visit www.yahoo.com and create an account. You may fail to log in with an ID created on the Yahoo website in a country that does not support Internet@TV. ❑ About Profile widget Press the green button. You can view a brief description of the Profile Widget, Copyright Policy, Terms of Service, and Privacy Policy. English - 72 BN68-02269A_Eng.indb 72 2009-03-31 오후 5:10:43 Using the Yahoo!® Widget Gallery Use the Yahoo!® Widget Gallery to add more widgets to your TV. View available TV Widgets in the following categories: Latest Widgets: Displays recently updated widgets. Yahoo!® Widgets: Displays widgets provided by Yahoo!®. Samsung Widgets: Displays widgets provided by Samsung. More Categories: Displays all widgets by category. N To install a widget, navigate to the detail screen and select Add Widget to My Profile and press the ENTERE button. The widget is installed and becomes available in the dock. • • • • ❑ Widget Gallery Settings Press the green button. About Yahoo! Widget Gallery... You can view brief information for the Widget Gallery, Copyright Policy, Terms of Service, and Privacy Policy. In the Developer Settings menu You can make your own widget. For more information on creating your own widget, visit our developer site at http://connectedtv. yahoo.com/ English - 73 BN68-02269A_Eng.indb 73 2009-03-31 오후 5:10:43 Using the Yahoo!® Weather Widget The Yahoo!® Weather Widget provides updates on your local and favorite weather locations. This content dynamically changes with weather conditions. • Press the green button on the remote control to display the Yahoo!® Weather Widget Settings menu. • From the Settings menu you can add or remove a city for which you want to view weather information. From the Settings menu: • Add New City by entering the name of the city. Once the search results are displayed, select the city you want and press the ENTERE button. • Delete City by selecting the city you want to delete from the city list. Press the ENTERE button and confirm the deletion. • Changing the Temperature Indication Mode You can change the temperature indication mode to Imperial or Metric. For example, Imperial will show temperatures in Fahrenheit and Metric in Celsius. ❑ Create a snippet for a favorite city • Select the city from the Yahoo!® Weather Widget’s home page and view the detailed weather information. • Press the yellow button. • Select the Add Snippet menu and press ENTERE to add the city as a snippet. ❑ Delete a snippet for a city • Launch the snippet. • Press the yellow button. • Select the Delete Snippet menu and press ENTERE to remove the snippet. Using the Yahoo!® News Widget The Yahoo!® News Widget provides the latest headline news for business, entertainment, politics, sports, top stories, and many other categories. Select a category, select a headline within the category, and view a dynamically updated news summary. English - 74 BN68-02269A_Eng.indb 74 2009-03-31 오후 5:10:43 Using the Yahoo!® Flickr Widget The Flickr Widget can provide you access to your favorite photos from friends and family while watching TV. Share your photos with your family on your big screen TV through a slideshow. • Personalize the Flickr Widget by logging in with your Yahoo! ID. • For detailed procedures on log in, refer to the ‘Using the Profile Widget’ instructions. • For more information on Flickr, visit http://www.flickr.com. N Your Photos shows photos you have registered with Flickr website. To view Flickr photos in a slideshow: • Select a thumbnail of a photo and press the ENTERE button to view the photo’s details. • Select Start Slideshow and press the ENTERE button. To control the slideshow display: • Press the ENTERE button during a slideshow. • The thumbnails of photos are displayed on the bottom of the screen. N When the slideshow control is displayed, you can Pause, Play and Stop the slideshow. N If you select the menu and press ENTERE, you can view information for the selected photo. • • • • • The Your Sets menu allows you to view photos you have classified in Flickr. The Explore menu allows you to explore photos featured by the Flickr website. You can view the photos updated daily. The Mark as Favorite or Remove From Favorite menu moves photos to your Favorite Photos set or removes photos from it. The Favorite Photos menu allows you to see the photos you have classified as favorites. The Your Contacts menu allows you to see updates from family and friends. The Your Groups menu allows you to select your favorite groups from the Flickr website to share and enjoy photos with the Flickr community of users. To configure the Yahoo!® Flickr Widget Settings press the green button on the remote control. • The Time Per Slide menu controls the speed of the slideshow. • The Repeat menu will restart the slideshow at the beginning after the last photo is shown. English - 75 BN68-02269A_Eng.indb 75 2009-03-31 오후 5:10:44 Using the Yahoo!® Finance Widget View stock information and the latest stock news with the Yahoo!® Finance Widget. Press the green button to set up your stocks. Use the Add New Symbol menu to enter the name of a new stock. • Select the stock you want to add from the search results and select the Add Symbol menu and press the ENTERE button. N The selected stock is added to the My Stocks list. • Use the Import Symbols From Yahoo!® menu to retrieve your Yahoo!® Finance portfolio. - The Merge Symbols menu merges the symbols in the Yahoo!® Finance Widget with the symbols from your portfolio. - The Replace Symbols menu deletes the symbols in the Yahoo!® Finance Widget and replaces them with the symbols from your portfolio. • Use the Display Format menu to change the stock-price fluctuation transition to Value or Percentage. • Create a snippet for a favorite stock. - Select the stock symbol from the Yahoo!® Finance Widget’s home page and view the detailed finance information. - Press the yellow button. - Select the Add Snippet menu and press ENTERE to add the stock as a snippet. • Delete a snippet - Launch the snippet from the dock - Press the yellow button. - Select the Delete Snippet menu and press ENTERE to remove the snippet. Troubleshooting for internet@TV Problem Possible Solution Some widget services do not • Check with that service provider. work. • In the widget, press the green button and get contact information or refer to help website for widget service provider information. • Refer to Help website page. Some widget contents only have English. How can I change the language? • Widget content language may be different from widget user interface language. It depends on service provider. After factory reset, Yahoo Widget service doesn’t work and warning message is displayed. • After factory reset, turn off and on your TV. Then restart Internet@TV. At the Flickr widget, I logged in my account. But, I can’t view my picture. • Visit Yahoo Web site, and activate your Flickr account at your Yahoo! ID. At the Profile widget, I did change location, but the previous setting still remains. • Turn off and on your TV. Then restart Internet@TV. • Now, you can enjoy widget services supported in changed location. English - 76 BN68-02269A_Eng.indb 76 2009-03-31 오후 5:10:44 Help Website Country Website Canada (French) www.samsung.com → téléviseurs → [email protected] →Internet@TV→ Canada (English) www.samsung.com →TV→[email protected]→Internet@TV Mexico (Spanish) www.samsung.com →televisores→[email protected]→Internet@TV→TV USA (English) www.samsung.com →Television→[email protected]→Internet@TV N Approaching step may be changed later on. N It can be different links for special countrie . English - 77 BN68-02269A_Eng.indb 77 2009-03-31 오후 5:10:44 Home Network Center Home Network Center About the Home Network Center The Home Network Center connects the TV and mobile phones through a network. You can view call arrivals, text message contents, and schedules set on the mobile phone on the TV using the Home Network Center. In addition, you can play the media contents saved on the mobile phones such as videos, photos and music by controlling them onto the TV via the network. N If the device supports DLNA DMC (Digital Media Controller) function, Home Network Center function is available. N The Samsung SCH-i900 mobile phone supports the Home Network Center. Other models will be added in the future. The mobile device may need additional software installation. For details, refer to each user’s guide. ❑ Connecting to the Home Network Center For more information about the network settings, refer to ‘Network Setup’. Connecting to a Wi-Fi Ad-hoc network TV Side Panel Mobile phone Samsung Wireless LAN Adapter or 1. Connect the ‘Samsung Wireless LAN Adapter’ to the USB1(HDD) or USB2 port of the TV. 2. For more information on how to configure Ad-hoc network, refer to ‘Setting the Network’. N For information on configuring the mobile phone’s network settings, refer to the mobile phone manual. 3. Set up the IP address, SSID and password for the mobile phone in the Ad-hoc Settings of the mobile phone using the Network Name (SSID) and Security Key (password) displayed on the TV. Connecting through a wire / wireless IP sharer 1. Connect the LAN port of the TV and the Wire/Wireless IP sharer using the LAN cable or connect the USB1(HDD) or USB2 port of the TV and the ‘Samsung Wireless LAN Adapter’. N For the procedures to set up the wire/wireless sharer and the mobile phone, refer to the manual of the corresponding device. TV Side Panel Mobile phone Wire/Wireless IP sharer Samsung Wireless LAN Adapter or LAN Cable TV Side Panel Mobile phone Wire/Wireless IP sharer Samsung Wireless LAN Adapter or LAN Cable English - 78 BN68-02269A_Eng.indb 78 2009-03-31 오후 5:10:48 Setting Up the Home Network Center ❑ Message Shows a list of mobile phones which have been set up with this TV to use the message function (the call arrivals, text message contents and schedules set on the mobile phone). Allowed Allows the mobile phone. Denied Blocks the mobile phone. Delete Deletes the mobile phone from the list. N This function just deletes the name from the list. If the deleted mobile device turns on or tries to connect to the TV, it may be shown on the list. ❑ Media Shows a list of mobile phones which is available to control media contents (videos, photos, music) from the phone. N Besides mobile phone, other mobile devices that support DLNA DMC are available. Allowed Allows the mobile phone. Home Network Center Message 111-1234-5671 : Allowed Media 111-1234-5672 : Allowed Setup 111-1234-5673 : Denied 111-1234-5674 : Denied Return Exit Home Network Center Message 111-1234-5671 : Allowed Media 111-1234-5672 : Allowed Setup 111-1234-5673 : Denied 111-1234-5674 : Denied Denied Blocks the mobile phone. Delete Deletes the mobile phone from the list. N This function just deletes the corresponding name on the list. If the deleted mobile device turns on or tries to connect to the TV, it may be shown on the list. Return Exit ❑ Setup Message → On / Off You can determine whether to use the message function (the call arrivals, text message contents, and schedules set on the mobile phone). Media → On / Off You can select whether to use the Media function that plays the contents (videos, photos, music) from the mobile phone. TV name You can set the TV name so as to find it easily on the mobile device. N If you selects User Input, you can type the TV name by OSK(On Screen Keyboard). Home Network Center Message Message : On Media Media : On Setup TV name : TV Return Exit English - 79 BN68-02269A_Eng.indb 79 2009-03-31 오후 5:10:52 Using the Message Function Using this function, you can view the call arrivals, text message contents and schedules set on the mobile phone through the alarm window while watching TV. husband SMS N To disable this Message alarm window, set Message to Off in Setup of the Home New message received Network Center. Doyou want to view N The alarm window appears for 20 seconds. If no key is pressed or if Cancel is selected, it appears up to three times at 5 minute intervals. N If OK is selected, or if OK is not selected while the message is displayed three times, the message will be deleted. The message is not deleted from the mobile phone. N The simple alarm window can be displayed, while using some applications such as Media Play, Contents Library, etc. In this case, to view the contents of the message, switch to TV viewing mode. N When the message of an unknown mobile phone is displayed, select the mobile phone in the Message item of the Home Network Center and select Denied to block the phone. the details? Cancel OK Media Play USB : USB 851.98MB/995.00MB Free PHOTO ❑ Message View If a new text message (SMS) arrives while you are watching TV, the alarm window appears. If you click the OK button, the contents of the message are displayed. • If you select the OK button, the contents of the message are displayed. • If you select the Cancel button, the alarm window appears up to three times at 5 minute intervals. N You can configure the viewing settings for the text message (SMS) contents on the mobile phone. For the procedures, refer to the mobile phone manual. N Some special characters may be displayed as blank or broken characters. ❑ Call Arrival Alarm Photo USB Music husband Setup Movie Device e Return husband Call You have a phone call Mom If a call arrives while you are watching TV, the alarm window appears. • If you select the OK button, the call arrival alarm is confirmed and the alarm window is closed. • If you select the Cancel button, the alarm window appears up to three times at 5 minute intervals. 011-298-2030 Cancel OK ❑ Schedule Alarm While you are watching TV, the alarm window appears to display the registered schedule. • If you select the OK button, you can view the contents of the schedule registered on the mobile phone. • If you select the Cancel button, the alarm window appears up to three times at 5 minute intervals. N You can configure the viewing settings for the schedule contents on the mobile phone. For the procedures, refer to the mobile phone manual. N Some special characters may be displayed as blank or broken characters. husband Scheduled event You have a schedule Do you want to view the details? OK Cancel English - 80 BN68-02269A_Eng.indb 80 2009-03-31 오후 5:10:52 Using the Media Function An alarm window appears informing the user that the media contents (videos, photos, music) sent from the mobile phone will be displayed on the TV. The contents are played automatically 3 seconds after the alarm window appears. If you press the RETURN or EXIT button when the alarm window appears, the Media Contents are not played. Media will be played from “Unknown Device 13” N To turn off the media contents transmission from the mobile phone, set Media to Off in Setup of the Home Network Center. N The contents may not be played on the TV depending on their resolution and format. ❑ Media play control buttons Button ◄/► ENTER RETURN TOOLS Operations • • • • Move the cursor and select an item. While playing a movie file: Skip forwards or backwards through the movie file. Pressing the ENTERE button during play pauses the play. Pressing the ENTERE button during pause resumes the play. Return to the previous menu. Run various functions from the Photo, Music and Movie menus. INFO Show file information. EXIT Stop Media Play mode and Returns to TV mode. N The ENTERE and ◄/► buttons may not work depending on the type of media content. N Using the mobile device, you can control playing media. For details, refer to each user’s guide. English - 81 BN68-02269A_Eng.indb 81 2009-03-31 오후 5:10:53 Appendix Troubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. Problem Possible Solution Poor picture quality. Try another channel. Adjust the antenna. Check all wire connections. Try another channel. Adjust the antenna. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections. Make sure the MMUTE button is off. First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly. Check all connections. Unplug the TV for 30 seconds, then try operating it again. Make sure the wall outlet is working. Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check the battery terminals. Press the TV button to put your remote control in the TV mode. Make sure the remote has batteries. Check that the “+” and “-” ends of the batteries are inserted correctly. Please check the digital signal strength and antenna input. Poor sound quality. No picture or sound. No sound or sound is too low at maximum volume. Picture rolls vertically. The TV operates erratically. The TV won’t turn on. Remote control malfunctions Digital broadcasting screen problem. The image is too light or too dark. Adjust the Brightness and Contrast. Adjust the Fine tuning. The image is too large or too small. Adjust the Size settings. The visual qualities of digital The visual qualities of digital channels may vary depending on the original production method channels vary. (analog or digital). - If the original production method is digital: High visual quality. - If the original production method is analog: The digital program displayed on the screen is originally an analog program which has been converted to digital. The visual quality is of an SD(Standard Definition) grade. Screen is black and power On your computer; check the Power and Signal Cable. indicator The TV is using its power management system. light blinks steadily. Move the computer’s mouse or press any key on the keyboard. On your equipment check (STB, DVD, etc) ; Power and Signal Cable. The TV is using its power management system. Press the SOURCE button on the panel or remote control. Turn the TV off and on. Although the TV caption shows The HD(High Definition) caption that appears when switching channels or when pressing the HD, the visual quality is not Information button on the remote control means the selected channel is a digital channel. If satisfactory. the broadcasting station converts an analog signal into digital and transmits the signal, the visual quality may not be perfect. A distorted picture appears in the If Screen Fit is selected in some external devices, a distorted picture may appear in the corner of the screen. corner of the screen. This symptom is caused by external devices, not the TV. A strange sound is heard. This is caused by minor systems operation and is not a defect. Pixels are visible on the screen. There may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product. The "Resets all settings to the This appears when you press and hold the EXIT button for a while. The product settings are default values" message appears. reset to the factory defaults. English - 82 BN68-02269A_Eng.indb 82 2009-03-31 오후 5:10:53 Preparation before installing the Wall-Mount Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount 1. Install the Wall Mount with a torque range of 15kgf·cm or less. Use care as the parts can be damaged if the torque is out of the specified range. 2.Accessory Kit contains Holder–Ring [②] for installing another company’s Wall-Mount. (Case B) N Screw down the hole [①]���������������������������������������� when installing wall-mount on the wall. How to attach the Stand-Base Using the screws for securing the stand base and the TV, firmly attach the TV to the stand base. (The exterior of the set may be different from the picture.) (PN50B650S1F) When mounting your TV on a wall, install the cover (➊) on the stand-base using two screws. (PN58B650S1F) Warning Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury. N Two or more people should carry the TV. Never lay the TV on the floor because of possible damage to the screen. Always store the TV upright. English - 83 BN68-02269A_Eng.indb 83 2009-03-31 오후 5:10:54 경고 주의 Securing the TV to the Wall Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang 경고 Caution over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety 주의 precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows. Accessaries TV-Holder / Screw 1 To prevent the TV from falling 1. Attach the TV-Holder to the TV by fastening the screw 1 (M4*16) into the holes in the center of the TV. N Make sure to only use the supplied screw. PN50B650S1F PN58B650S1F 2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the screws fastened on the wall or cabinet so that the TV is fixed. N Purchase the screws to be used on the wall or cabinet separately. N Install the TV close to the wall so that it does not fall. N When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes. N Confi rm that the cord or link does not come loose frequently. N Before moving the TV, separate the connected cord first. PN50B650S1F Wall Cabinet PN58B650S1F Wall Cabinet 3. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer. English - 84 BN68-02269A_Eng.indb 84 2009-03-31 오후 5:10:57 Wall Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. Product Family inch VESA Spec. (A * B) 19" ~22" 100 * 100 23"~29" 200 * 100 30"~40" 200 * 200 46"~55" 400 * 400 57"~70" 800 * 400 80" ~ 1400 * 800 42"~ 50" 400 * 400 58"~ 63" 600 * 400 70" ~ 800 * 400 80" ~ 1400 * 800 Standard Screw Quantity M4 M6 LCD-TV 4 PDP-TV N N N N M8 M8 4 We provided the standard dimensions for wall mount kits as shown in the table. When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set. For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications. N Do not use screws that do not comply with the VESA standard screw specifications. N Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. N Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. N Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model. N Do not exceed 15 degrees tilt when mounting this TV. Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. English - 85 BN68-02269A_Eng.indb 85 2009-03-31 오후 5:10:58 Specifications Model Name PN50B650S1F PN58B650S1F 50 inch (49.9 inches measured diagonally) 58 inch (58.0 inches measured diagonally) PC Resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Sound (Output) 10W x 2 15W x 2 48.5 x 29.8 x 2.9 inches (1231 x 756 x 74 mm) 48.5 x 32.6 x 11.5 inches (1231 x 817 x 290 mm) 55.2 x 33.4 x 2.9 inches (1401.3 x 847.9 x 74 mm) 55.2 x 36.1 x 13.2 inches (1401.3 x 916.5 x 335 mm) 73.2 lbs (33.2 kg) 84.2 lbs (38.2 kg) 85.7 lbs (38.9 kg) 100.9 lbs (45.8 kg) 50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing 50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing Screen Size (Diagonal) Dimension (W x H x D) Body With stand Weight Body With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity N This device is a Class B digital apparatus. N Design and specifications are subject to change without prior notice. N For the power supply and Power Consumption, refer to the label attached to the product. English - 86 BN68-02269A_Eng.indb 86 2009-03-31 오후 5:10:58 Dimensions (PN50B650S1F) TOP VIEW FRONT VIEW JACK PANEL DETAIL SIDE VIEW REAR VIEW NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2009 Samsung Electronics America, Inc. English - 87 BN68-02269A_Eng.indb 87 2009-03-31 오후 5:10:59 Dimensions (PN58B650S1F) TOP VIEW FRONT VIEW JACK PANEL DETAIL SIDE VIEW REAR VIEW NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2009 Samsung Electronics America, Inc. English - 88 BN68-02269A_Eng.indb 88 2009-03-31 오후 5:10:59 Software License This product uses parts of the software from the Independent JPEG Group. This product uses parts of the software owned by the Freetype Project (www. freetype.org). This product uses some software programs which are distributed under the GPL/LGPL license. Accordingly, the following GPL and LGPL software source codes that have been used in this product can be provided after asking to [email protected]. GPL software: Linux Kernel, Busybox, Binutils LGPL software: Glibc, ffmpeg, smpeg, libgphoto, libusb, SDL ❑ GNU GENERAL PUBLIC LICENSE GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’ and authors’ sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. “This License” refers to version 3 of the GNU General Public License. “Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. “The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations. To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the earlier work. A “covered work” means either the unmodified Program or a work based on the Program. To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any nonsource form of a work. A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work’s System Libraries, or generalpurpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. BN68-02269A_Eng.indb 89 2009-03-31 오후 5:11:00 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users’ Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work’s users, your or third parties’ legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any nonpermissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: 6. a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machinereadable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or nonconsumer uses, unless such uses represent the only significant mode of use of the product. “Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding BN68-02269A_Eng.indb 90 2009-03-31 오후 5:11:00 7. Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of theadditional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in interest had or could give under the previous paragraph, plus a right to possession of the You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”. A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a “patent BN68-02269A_Eng.indb 91 2009-03-31 오후 5:11:00 license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient’s use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the nonexercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others’ Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state theexclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found. <one line to give the program’s name and a brief idea of what it does.> Copyright (C) <year> <name of author> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. BN68-02269A_Eng.indb 92 2009-03-31 오후 5:11:00 You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: <program> Copyright (C) <year> <name of author> This program comes with ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details. The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course, your program’s commands might be different; for a GUI interface, you would use an “about box”. You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright disclaimer” for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see <http://www.gnu.org/licenses/>.The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read <http://www.gnu.org/philosophy/why-not-lgpl.html>.GNU Lesser General Public License (LGPL) GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things. To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it. For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’ and authors’ sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS 0. Definitions. “This License” refers to version 3 of the GNU General Public License. “Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. “The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations. To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the earlier work. A “covered work” means either the unmodified Program or a work based on the Program. To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well. To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying. An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. 1. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any nonsource form of a work. A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language. The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it. The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work’s System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing BN68-02269A_Eng.indb 93 2009-03-31 오후 5:11:00 those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work. The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law. You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you. Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary. 3. Protecting Users’ Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work’s users, your or third parties’ legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any nonpermissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program. You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee. 5. Conveying Modified Source Versions. You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: 6. a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”. c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it. d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so. A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machinereadable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange. b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge. c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b. d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements. e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or nonconsumer uses, unless such uses represent the only significant mode of use of the product. “Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made. If you convey an object code work under this section in, BN68-02269A_Eng.indb 94 2009-03-31 오후 5:11:00 7. or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM). The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions. When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission. Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms: a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or d) Limiting the use for publicity purposes of names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying. If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms. Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way. 8. Termination. You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so. 10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts. You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. 11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”. A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this License. Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, BN68-02269A_Eng.indb 95 2009-03-31 오후 5:11:00 a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party. If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient’s use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it. A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the nonexercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007. Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law. 12. No Surrender of Others’ Freedom. If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program. 13. Use with the GNU Affero General Public License. Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program. Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. Limitation of Liability. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. ❑ END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found. <one line to give the program’s name and a brief idea of what it does.> Copyright (C) <year> <name of author> This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of BN68-02269A_Eng.indb 96 2009-03-31 오후 5:11:00 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/ licenses/>. Also add information on how to contact you by electronic and paper mail. If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode: <program> Copyright (C) <year> <name of author> This program comes with ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details. The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of course, your program’s commands might be different; for a GUI interface, you would use an “about box”. You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright disclaimer” for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see <http://www.gnu.org/licenses/>. The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read <http://www.gnu.org/philosophy/why-not-lgpl.html>. The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact [email protected]. OpenSSL License Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. 2. 3. 4. 5. 6. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)” The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected]. Products derived from this software may not be called “OpenSSL nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)” THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson (tjh@ cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved. This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([email protected]). Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. 2. 3. 4. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/ or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young ([email protected])” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-). If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “ This product includes software written by Tim Hudson ([email protected])” THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.] BN68-02269A_Eng.indb 97 2009-03-31 오후 5:11:01 Información importante sobre la garantía relativa al formato de visualización del televisor Las pantallas PDP con formato de pantalla panorámica (16:9, la relación de aspecto ancho:alto de la pantalla) están diseñadas principalmente para visualizar vídeos de movimiento de formato panorámico. En estas pantallas debe ver las imágenes en el formato 16:9 de pantalla panorámicao ampliadas para llenar la pantalla si el modelo tiene esta opción, y en movimiento constante. La visualización de imágenesy gráficos estáticos en la pantalla, como las barras oscuras laterales en programación y vídeos de televisión en formato estándar no ampliados, debe limitarse a no más del 5% del tiempo total de visualización del televisor por semana. Además, la visualización de otras imágenes estáticas y texto, como los informes de bolsa, pantallas de videojuegos, logotipos de emisoras, sitios Web o gráficos y dibujos de ordenador, deberá limitarse en todos los televisores como ya se ha descrito. La visualización de imágenes estáticas que supere los límites de las instrucciones anteriores puede producir un envejecimiento desigual de las pantallas PDP, lo que provocará una reproducción superpuesta sutil pero permanente de la imagen. Para evitarlo, varíe la programación y las imágenes y, sobre todo, visualice imágenes en movimiento a toda pantalla, no gráficos estáticos ni barras oscuras. En modelos de PDP que ofrezcan opciones para el tamaño de la imagen, utilice estos controles para ver los distintos formatos como imagen a toda pantalla. Tenga cuidado en la selección y duración de los formatos de televisión utilizados para la visualización. La garantía limitada de Samsung no cubre el envejecimiento desigual de la PDP como resultado de la selección y uso de formatos, así como otras imágenes retenidas. © 2009 Samsung Electronics Co., Ltd. Reservados todos los derechos. Español - BN68-02269A_SPA.indd 2 2009-03-31 오후 12:58:40 Instrucciones para el usuario Retención de imágenes en la pantalla No deje imágenes fijas visibles (como las de un videojuego) en el panel de la pantalla de plasma durante mucho tiempo, ya que se podría producir la retención de la imagen en la misma. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”. Para evitar dicha retención de la imagen, consulte la página 26 de este manual para reducir el grado de brillo y contraste de la pantalla al mostrar una imagen fija. Altitud La PDP sólo puede funcionar normalmente hasta altitudes de 2.000 metros. Calor en la parte superior del TV de plasma La parte superior del aparato puede calentarse tras un uso prolongado ya que el calor se disipa desde el panel a través de los orificios de ventilación de la parte superior. Esto es normal y no indica ningún defecto ni fallo de funcionamiento del aparato. No obstante, debe evitarse que los niños toquen la parte superior del aparato. El aparato emite una especie de crujido. El ruido similar a un crujido puede producirse cuando el aparato se contrae o se expande debido a un cambio ambiental de temperatura o humedad. Este hecho es normal y no se trata de ningún defecto en la unidad. Defecto de celda La PDP utiliza un panel compuesto de 2,360,000 (nivel HD) a 6,221,000(nivel FHD) a píxeles que requieren una sofisticada tecnología para su producción. No obstante, puede que existan unos cuantos píxeles brillantes u oscuros en la pantalla. Estos píxeles no influirán en el rendimiento del aparato. Evite que el TV funcione a temperaturas por debajo de 41 °F (5 °C) La imagen fija visualizada durante demasiado tiempo puede causar daños permanentes en el panel de la PDP. Ver el TV de plasma en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en la izquierda, derecha o centro de la pantalla causados por la diferencia de emisión de luz en la pantalla. La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la pantalla. Los daños provocados por los efectos mencionados no quedan cubiertos por la garantía. Imágenes fantasma en la pantalla. Ver imágenes fijas de videojuegos y PC durante un periodo prolongado puede producir restos de imágenes parciales. Para evitar este efecto, reduzca el ‘brillo’ y el ‘contraste’ al mostrar imágenes fijas durante un tiempo prolongado. Garantía La garantía no cubre ningún daño causado por la retención de imágenes. La garantía no cubre el desgaste de la pantalla. Español - BN68-02269A_SPA.indd 3 2009-03-31 오후 12:58:40 Español Índice Conexión y preparación del televisor ■ ■ ■ ■ ■ ■ Listado de características........................................................... 5 Comprobación de los componentes........................................... 5 Montaje de los cables................................................................. 5 Aspecto general del panel de control......................................... 6 Aspecto general del panel de conexiones.................................. 7 Mando a distancia...................................................................... 8 Conexiones ■ Conexión de las antenas de VHF y UHF................................... 9 ■ Conexión de la televisión por cable............................................ 9 ■ Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de HDMI....................... 11 ■ Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de DVI.......................... 11 ■ Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de los cables de componentes................ 12 ■ Conexión a una videocámara ................................................. 12 ■ Conexión de un aparato de vídeo............................................ 13 ■ Conexión de un sistema de audio digital.................................. 14 ■ Conexión de un amplificador/DVD para Home Cinema .......... 14 ■ Conexión a un PC.................................................................... 15 Funcionamiento ■ ■ ■ ■ ■ ■ ■ ■ Encendido y apagado del televisor.......................................... 16 Cambio de canales ................................................................. 16 Ajuste del volumen................................................................... 16 Uso del botón TOOLS.............................................................. 17 Uso de los botones con luz de fondo del mando a distancia ...... 17 Visualización de la pantalla ..................................................... 17 Visualización de los menús...................................................... 18 Función Plug & Play................................................................. 19 Control de los canales ■ Almacenamiento de canales ................................................... 20 ■ Gestión de los canales ............................................................ 21 Control de la imagen ■ Cambio del tamaño de la imagen............................................. 23 Pantalla de PC ■ Uso del televisor como una pantalla de ordenador (PC).......... 27 ■ Modos de pantalla.................................................................... 27 ■ Ajuste del televisor con el ordenador....................................... 28 Control del sonido ■ Cambio de la configuración del sonido.................................... 29 Descripción de las funciones ■ ■ ■ ■ ■ Configuración del menú de configuración................................ 30 Visualización PIP (Imagen en imagen)..................................... 33 Configuración de la hora.......................................................... 34 Lista de Entradas/Editar Nombre............................................. 35 Soporte técnico........................................................................ 36 Media Play ■ Conexión de un dispositivo USB.............................................. 38 ■ Uso de la función para la reproducción multimedia................. 39 ■ ■ ■ ■ ■ ■ ■ ■ Media Play-DLNA ■ ■ ■ ■ Configuración de la red DLNA.................................................. 50 Instalación de la aplicación DLNA............................................ 50 Uso de la aplicación DLNA....................................................... 52 Uso de la función DLNA........................................................... 55 Anynet+ ■ ■ ■ ■ ■ ■ Conexión de dispositivos Anynet+........................................... 56 Configuración de Anynet+......................................................... 57 Conmutación entre dispositivos Anynet+................................. 57 Grabación................................................................................. 58 Escucha a través de un receptor.............................................. 59 Solución de problemas de Anynet+.......................................... 59 Biblioteca de contenidos ■ Activación de la biblioteca de contenidos................................. 60 ■ Uso de la biblioteca de contenidos........................................... 61 red ■ Conexión de la red................................................................... 62 ■ Configuración de la red............................................................ 65 Internet@TV ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Primeros pasos con Internet@TV............................................ 69 Edición del extracto en el acoplamiento................................... 71 Uso del widget de un perfil....................................................... 71 Uso de la galería de widgets de Yahoo!®................................ 73 Uso del servicio meteorológico de Yahoo!®............................. 74 Uso del servicio de noticias de Yahoo!®.................................. 74 Uso del servicio Flickr de Yahoo!®........................................... 75 Uso del servicio de finanzas de Yahoo!®................................. 76 Solución de problemas con Internet@TV................................. 76 Página web de ayuda............................................................... 77 Centro de red doméstica ■ ■ ■ ■ Centro de red domésticas........................................................ 78 Configuración del Centro de red doméstica............................. 79 Uso de la función de mensajería.............................................. 80 Uso de la función multimedia................................................... 81 Apéndice ■ ■ ■ ■ ■ ■ ■ ■ N Símbolos Uso y clasificación de la lista de fotos...................................... 40 Visualización de una foto o una presentación.......................... 41 Uso y clasificación de la lista de música.................................. 43 Reproducción de un archivo de música................................... 44 Uso y clasificación de la lista de películas............................... 45 Reproducción de un archivo de película.................................. 46 Configuración de imagen y música.......................................... 48 Uso del menú de configuración................................................ 49 Pulse Resolución de problemas......................................................... 82 Preparación antes de instalar el montaje mural....................... 83 Cómo montar el soporte base.................................................. 83 Fijación del televisor a la pared................................................ 84 Especificaciones del equipo de montaje en la pared (VESA).. 85 Especificaciones....................................................................... 86 Dimensiones (PN50B650S1F)................................................. 87 Dimensiones (PN58B650S1F)................................................. 88 O T Botón de una pulsación Herramientas Español - BN68-02269A_SPA.indd 4 2009-03-31 오후 12:58:40 Conexión y preparación del televisor Listado de características • • • • • • • • • • • Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor. Temporizador automático para encender o apagar el televisor. Temporizador de desconexión especial. Función V-chip. Excelente interfaz digital y capacidad de trabajo en red: El sintonizador digital HD incorporado permite ver las emisiones HD que no exigen una suscripción sin que sea necesario disponer de un receptor de televisión por cable/satélite (decodificador). Conexión HDMI/DVI del PC con este televisor. Calidad excelente de imagen. SRS TruSurround HD proporciona un sistema surround virtual. Media Play : Permite reproducir archivos de música, imágenes y películas guardados en un dispositivo USB o DLNA. Internet@TV : Se pueden utilizar diferentes servicios de Internet para ver información útil y contenidos de entretenimiento. Centro de red doméstica : Permite configurar un servidor de mensajería móvil o un convertidor multimedia DLNA. Comprobación de los componentes Compruebe que los artículos siguientes vengan incluidos con su televisor. Si falta alguno, póngase en contacto con su distribuidor. N El color y la forma de los componentes pueden variar según el modelo. Mando a distancia (BN59-00854A)/ Pilas AAA (4301-000103) CD del programa Cable de Manual del usuario/ Tarjeta de garantía/ Paño de limpieza alimentación Guía de Manual de seguridad (BN63-01798B) (3903-000144) configuración rápida (No disponible en (BN68-01923A) todos los lugares) Soporte de cables Soporte TV / Tornillos (BN96-10788A) (Consulte la página 84) Núcleo de ferrita Núcleo de ferrita para Cubierta inferior Cubierta inferior / Soportes anilla (4) Tornillos (4) para cable de cable de AV lateral (Consulte la página 83) Tornillos (4) (Consulte la página 83) Sólo alimentación (3301-001201) (Sólo PN50B650S1F) (Consulte la página 83) PN50B650S1F (3301-001305) (Sólo PN58B650S1F) (Sólo PN58B650S1F) N Núcleo de ferrita Los núcleos de ferrita se utilizan para proteger los cables de las interferencias. Cuando conecte un cable, abra el núcleo de ferrita y sujételo con un cable cerca del enchufe. Cable de alimentación Cable de audio/cable de vídeo (Sólo PN58B650S1F) Montaje de los cables Sujete los cables con el soporte de cables para que éstos no sean visibles a través del soporte transparente. Español - BN68-02269A_SPA.indd 5 2009-03-31 오후 12:58:42 Aspecto general del panel de control Los botones de la parte inferior derecha del panel controlan las funciones básicas del televisor, incluidos los menús en pantalla. Para utilizar las funciones más avanzadas debe usarse el mando a distancia. N El color y la forma del producto pueden variar según el modelo. N Los botones del panel frontal se pueden activar al tacto. 1 SOURCEE Cambia entre todas las fuentes de entrada disponibles (TV, AV1, AV2, Componente1, Componente2, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB). N En el menú de la pantalla, utilice este botón del mismo modo que el botón ENTERE del mando a distancia. 2 MENU Púlselo para ver en pantalla un menú de las características del televisor. 3 + VOL – Púlselos para subir o bajar el volumen. En el menú de la pantalla, use los botones + VOL – del mismo modo que los botones ◄ y ► del mando a distancia. 4 < CH > Permiten cambiar de canal. En el menú de la pantalla, use los botones < CH > del mismo modo que los botones ▲ y ▼ del mando a distancia. 5 INDICADOR DE ENCENDIDO Parpadea y se apaga cuando se enciende el aparato y se ilumina en el modo en espera. 6 P (ENCENDIDO) Se pulsa para encender o apagar el televisor. 7 SENSOR DEL MANDO A DISTANCIA El mando a distancia debe dirigirse hacia este punto del televisor. 8 ALTAVOCES Español - BN68-02269A_SPA.indd 6 2009-03-31 오후 12:58:42 Aspecto general del panel de conexiones Use los terminales del panel de conexión para conectar componentes de A/V que estarán disponibles permanentemente, como un reproductor de Blu-ray/DVD o un aparato de vídeo. N El color y la forma del producto pueden variar según el modelo. Panel posterior del TV 1 POWER IN Permite conectar el cable de alimentación suministrado. 2 LAN Conecte un cable LAN a este puerto para conectarse a la red (Internet@TV). 3 AUDIO OUT (R/L) Salidas de audio para dispositivos externos. 4 PC IN [PC] / [AUDIO] Conexión para los terminales de salida de audio y vídeo del PC. N If your PC supports an HDMI connection, you can connect this to the HDMI IN 1, 2, 3, or 4 terminal. N If your PC supports a DVI connection, you can connect this to the HDMI IN 2 / DVI AUDIO IN [R-AUDIO-L] terminal. 5 DVI AUDIO IN (AUDIO-R/L) Conexión para el terminal de salida de audio DVI de un dispositivo externo. 6 HDMI IN 1, 2(DVI), 3, 4 Conexión para el terminal HDMI de un dispositivo que tenga salida HDMI. N Utilice un cable HDMI inferior a 14,4mm. N ¿Qué es HDMI? - HDMI, o interfaz multimedia de alta definición, es una interfaz que permite la transmisión de señales digitales de audio y de vídeo mediante un solo cable. - La diferencia entre los dispositivos HDMI y DVI es que el HDMI es más pequeño y tiene instalada la función de codificación HDCP (protección alta de la copia digital del ancho de banda). - Recomendamos utilizar un cable de 14,4 mm. Es más pequeño que el normal. Panel lateral del TV 7 ANT IN Usa un conector coaxial de 75 Ω para antena o red por cable. 8 DIGITAL AUDIO OUT (OPTICAL) Se conecta al componente de audio digital. 9 COMPONENT IN 1, 2 / AV IN 1 Permite conectar el vídeo/audio de componentes. El terminal COMPONENT IN 1 también se usa como terminal AV IN 1. N Conecte el cable de vídeo al terminal COMPONENT IN 1 [Y/VIDEO] y el cable de audio a los terminales COMPONENT IN 1 [R-AUDIO-L]. 0 EX-LINK Sólo para servicio. ! USB 1(HDD) / USB 2 Conexión para un dispositivo de almacenamiento masivo USB para ver archivos de fotos y reproducir archivos de audio. N El terminal USB también se usa como terminal HDD. HDD (unidad de disco duro) es un dispositivo que almacena datos codificados digitalmente. @ AV IN 2 Entradas de audio y vídeo para dispositivos externos. Español - BN68-02269A_SPA.indd 7 2009-03-31 오후 12:58:43 Mando a distancia Puede utilizar el mando a una distancia del televisor de hasta 7 metros. N El color y la forma del producto pueden variar según el modelo. N El exceso de luz puede influir en el rendimiento del mando a distancia. 1 POWER Enciende y apaga el televisor. 2 TV Selecciona directamente el modo TV. 3 BOTONES NUMÉRICOS Permiten cambiar de canal. 4 5 6 7 8 9 $ INFO Púlselo para mostrar información en la pantalla del televisor. % Utilice estos botones en los modos DMA, Media Play y Anynet+. ( : Este mando a distancia se puede usar para controlar la grabación de las grabadoras de Samsung con la función Anynet+). Permite seleccionar canales adicionales (digitales y analógicos) emitidos por la misma ON/OFF ^ emisora. Por ejemplo, para seleccionar el canal Permite activar la luz de fondo de los “54-3”, pulse “54” y después pulse “ ” y “3”. botones del mando a distancia. Esta función es útil cuando se usa el mando a distancia MMUTE de noche o en una sala oscura. (El uso Interrumpe temporalmente el sonido. del control remoto con los botones de VOL iluminación ON / OFF ( ) activados reduce Permiten subir o bajar el volumen. el tiempo de uso de las pilas.) SOURCE & PRE-CH Permite ver y seleccionar las fuentes de Sintoniza el canal anterior. vídeo disponibles. CH * CH LIST Permiten cambiar de canal. Muestra las listas de canales en la pantalla. ( MENU TOOLS Muestra el menú en la pantalla. Permite seleccionar rápidamente las ) FAV.CH funciones que se usan con mayor Permite sintonizar los canales favoritos. frecuencia. RRIBA▲/ABAJO▼/IZQUIERDA◄/ 0 A DERECHA►/ENTER Permiten seleccionar los elementos del menú en pantalla y cambiar los valores del menú. ! INTERNET@ Esta función permite ver Internet@TV. @ BOTONES DE COLORES Utilice estos botones en los menús Lista de canales, Media Play e Internet@TV, etc. # MEDIA.P (Media play) Esta función permite ver y reproducir archivos de fotos y de música desde un dispositivo externo. (Consulte las páginas 40(fotos), 43 (música) y 45 (Cine).) a RETURN Vuelve al menú anterior. b EXIT Se pulsa para salir del menú. c P.SIZE Selección del tamaño de la imagen. d CONTENT Esta función permite ver la biblioteca de contenidos. e CC Controla el decodificador de subtítulos. f MTS Permite elegir estéreo, monoaural o un programa de audio independiente (emisión SAP). ❑ Instalación de las pilas en el mando a distancia 1 Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. 2 Instale dos pilas de tamaño AAA. N Asegúrese de respetar los extremos “+” y “–” de las pilas indicados en el diagrama del interior del compartimento. 3. Cierre la tapa, como se muestra en la ilustración. N Saque las pilas y guárdelas en un lugar fresco y seco si no va a utilizar el mando a distancia durante un período de tiempo prolongado. (Suponiendo un uso normal del televisor, las pilas deberían durar aproximadamente un año.) N El uso del mando a distancia con los botones de iluminación ON/OFF( N Si el mando a distancia no funciona, haga estas comprobaciones 1. 2. 3. 4. 5. ) activados reduce el tiempo de uso de las pilas. ¿Está encendido el televisor? ¿Están intercambiados los polos positivos y negativos de las pilas? ¿Se han agotado las pilas? ¿Ha habido un corte de energía o se ha desenchufado el cable? ¿Hay en las proximidades un fluorescente o un neón? Español - BN68-02269A_SPA.indd 8 2009-03-31 오후 12:58:44 Conexiones Conexión de las antenas de VHF y UHF Si su antena tiene un juego de cables con este aspecto, consulte “Antenas con cables planos dobles de 300 Ω” a continuación. Si la antena tiene un cable con este aspecto, consulte “Antenas con cables coaxiales de 75 Ω”. Si tiene dos antenas, consulte “Antenas de VHF y UHF separadas”. ❑ Antenas con cables planos dobles de 300 Ω Si utiliza una antena externa (de azotea o de “cuernos”) de cables planos dobles de 300 Ω, siga las indicaciones siguientes. 1. Coloque los hilos del cable doble bajo los tornillos de un adaptador de 300 a 75 Ω (no suministrado). Utilice un destornillador para apretar los tornillos. 2. Enchufe el adaptador en el terminal ANT IN de la parte posterior del televisor. ANT IN ❑ Antenas con cables coaxiales de 75 Ω ANT IN Enchufe el cable de la antena en el terminal ANT IN de la parte posterior del televisor. ❑ Antenas de VHF y UHF separadas Si dispone de dos antenas separadas para el televisor (una de VHF y otra de UHF), deberá combinar las señales de ambas antenas antes de conectarlas al televisor. Este procedimiento requiere un combinador-adaptador opcional (disponible en la mayoría de tiendas de electrónica). 1. Conecte los dos cables de antena al combinador. 2. Enchufe el combinador en el terminal ANT IN de la parte inferior del panel posterior. UHF VHF ANT IN UHF VHF Conexión de la televisión por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. ❑ Cable sin decodificador de cable Enchufe el cable de entrada en el terminal ANT IN de la parte posterior del televisor. ANT IN N Dado que el televisor tiene previsto el uso de televisión por cable, no se necesita un decodificador para ver canales de cable no codificados. ❑ Conexión al decodificador de cable que decodifica todos los canales 1. Busque el cable conectado al terminal ANT OUT de su decodificador de cable. N Este terminal puede estar etiquetado como “ANT OUT”, “VHF OUT” o sencillamente ANT IN ANT OUT “OUT”. 2. Enchufe el otro extremo del cable en el terminal ANT IN de la parte posterior del televisor. ANT IN Continúa… Español - BN68-02269A_SPA.indd 9 2009-03-31 오후 12:58:44 ❑ Conexión al decodificador de cable que decodifica algunos canales Si su decodificador de cable decodifica únicamente algunos canales (como, por ejemplo, canales de suscripción), siga las instrucciones que se incluyen a continuación. Necesitará un separador de señales de dos vías, un conmutador RF (A/B) y cuatro extensiones de cable de antena. (Estos artículos están disponibles en la mayoría de las tiendas de electrónica.) 1. Busque y desconecte el cable conectado al terminal ANT IN de su decodificador de cable. N Este terminal puede estar etiquetado como “ANT IN”, “VHF IN” o sencillamente “IN”. ANT IN 2. Conecte este cable al separador de señales de dos vías. Cable de entrada 3. Conecte un cable de antena entre el terminal OUTPUT del separador y el terminal IN del decodificador de cable. Separador IN Cable de entrada CABLE OUT Separador Decodificador de cable 4. Conecte un cable de antena entre el terminal ANT OUT del decodificador de cable y el terminal B–IN del conmutador RF(A/B). A Cable de entrada IN B CABLE OUT Separador Decodificador de cable 5. Conecte otro cable entre el otro terminal OUT del separador y el terminal A–IN del conmutador RF (A/B). A Cable de entrada IN CABLE OUT Separador Decodificador de cable 6. Conecte el último cable de antena entre el terminal OUT del conmutador RF (A/B) y el terminal ANT IN de la parte posterior del televisor. RF (A/B) Conmutador B RF (A/B) Conmutador Parte posterior del televisor A Cable de entrada IN CABLE OUT B ANT IN Separador RF (A/B) Conmutador Una vez realizada esta conexión, ajuste el conmutador A/B a la posición “A” para la visualización normal. Ajuste el conmutador A/B en la posición “B” para ver los canales codificados. (Cuando ajuste el conmutador A/B en la posición “B”, necesitará sintonizar el TV con el canal de salida del receptor de cable, que normalmente es el canal 3 o 4). Español - 10 BN68-02269A_SPA.indd 10 2009-03-31 오후 12:58:45 Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de HDMI Esta conexión sólo se puede realizar si hay un terminal de salida de HDMI en el dispositivo externo. Esta conexión proporciona una imagen de la mayor calidad. 1. Conecte un cable HDMI entre el terminal HDMI IN (1, 2(DVI), 3 o 4) del televisor y el terminal HDMI del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador). Panel posterior del TV Reproductor de DVD/Blu-ray o receptor por cable/satélite Panel lateral del TV o 1 Cable HDMI (No suministrado) N ¿Qué es HDMI? • HDMI, o interfaz multimedia de alta definición, es una interfaz que permite la transmisión de señales digitales de audio y de vídeo mediante un solo cable. • La diferencia entre los dispositivos HDMI y DVI es que el HDMI es más pequeño y tiene instalada la función de codificación HDCP (protección alta de la copia digital del ancho de banda). N Cada reproductor DVD o receptor por cable/satélite (decodificador) tiene una configuración diferente del panel posterior. N Puede que el televisor no proporcione salida de sonido y muestre imágenes con colores anómalos si se han conectado reproductores DVD/Blu-ray o receptores por cable/satélite que admiten versiones de HDMI anteriores a la versión 1.3. Si se conecta un cable antiguo HDMI y no hay sonido, conecte el cable HDMI al terminal HDMI IN 2(DVI) y los cables de audio a los terminales DVI AUDIO IN [R-AUDIO-L] de la parte posterior del televisor. Si ocurriera esto, póngase en contacto con la empresa que suministró el reproductor de DVD/Blu-ray o receptor por cable/satélite para confirmar la versión HDMI y solicite una actualización. N Los cables HDMI que no son 1.3 pueden causar un molesto parpadeo o que no se muestre la pantalla. Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de DVI Esta conexión sólo se puede realizar si hay un terminal de salida de DVI en el dispositivo externo. 1. Conecte un cable HDMI/DVI o un adaptador de DVI-HDMI entre el terminal HDMI IN 2(DVI) del televisor y el terminal DVI del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador). 2. Conecte los cables de audio entre el terminal DVI AUDIO IN [R-AUDIO-L] del televisor y del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador). Panel posterior del TV Reproductor de DVD/Blu-ray o receptor por cable/satélite 2 Cablede audio (no suministrado) 1 Cable HDMI/DVI (no suministrado) N Cada reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) tiene una configuración diferente del panel posterior. N Cuando conecte un reproductor de DVD o receptor de televisión por cable/satélite (decodificador), debe hacer coincidir los colores del terminal de conexión y del cable. N Cuando se usa una conexión de cable HDMI/DVI, se debe conectar en el terminal HDMI IN 2(DVI). Español - 11 BN68-02269A_SPA.indd 11 2009-03-31 오후 12:58:46 Conexión de un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) a través de los cables de componentes Los terminales del panel posterior del televisor facilitan la conexión de un reproductor de DVD/Blu-ray o receptor por cable/ satélite (decodificador) al TV. 1. Conecte los cables de los componentes entre los terminales COMPONENT IN (1 o 2) [Y, PB, PR] del televisor y los terminales COMPONENT [Y, PB, PR] del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador). 2. Conecte los cables de audio entre los terminales COMPONENT IN (1 o 2) [R-AUDIO-L] del televisor y los terminales AUDIO OUT del reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador). Panel posterior del TV Reproductor de DVD/Blu-ray o receptor por cable/satélite 2 Cablede audio (no suministrado) 1 Cable de componentes (no suministrado) N El vídeo de componentes divide las señales de vídeo en Y (Luminancia (brillo)), PB (azul) y PR (rojo) para mejorar la calidad del vídeo. Las conexiones de audio y de vídeo de componentes deben coincidir. Por ejemplo, si se conecta el cable de vídeo a COMPONENT IN 1, conecte también el cable de audio a la misma entrada COMPONENT IN 1. N Cada reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador) tiene una configuración diferente del panel posterior. N Cuando conecte un reproductor de DVD/Blu-ray o receptor por cable/satélite (decodificador), debe hacer coincidir los colores del terminal de conexión y del cable. Conexión a una videocámara Los conectores del panel lateral y posterior del TV facilitan la conexión a una videocámara. ❑ Mediante el cable de audio/vídeo 1. Conecte un cable de vídeo entre el terminal AV IN 2 [VIDEO] del televisor y el terminal VIDEO OUT de la videocámara. 2. Conecte cables de audio entre los terminales AV IN 2 [L-AUDIO-R] del televisor y los terminales AUDIO OUT de la videocámara. N Cada videocámara tiene una configuración diferente del panel posterior. Panel lateral del TV Videocámara 1 Cable de vídeo (no suministrado) 2 Cablede audio (no suministrado) N Cuando conecte una videocámara, debe hacer coincidir los colores del terminal de conexión y del cable. Español - 12 BN68-02269A_SPA.indd 12 2009-03-31 오후 12:58:47 ❑ Mediante el cable HDMI 1. Conecte un cable HDMI entre el terminal HDMI IN (1, 2(DVI), 3 o 4) del televisor y el terminal HDMI de la videocámara. Panel posterior del TV Panel lateral del TV Videocámara 1 Cable HDMI (No suministrado) o N Cada videocámara tiene una configuración diferente del panel posterior. Conexión de un aparato de vídeo ❑ Conexión de vídeo En estas instrucciones se asume que ya ha conectado el TV a una antena o a un sistema de TV por cable (de acuerdo con las instrucciones de las páginas 9 y 10). Ignore el paso 1 si aún no ha conectado una antena o un sistema de cable. 1. Desenchufe el cable o la antena de la parte posterior del TV. 2. Enchufe el cable o la antena en el terminal ANT IN de la parte posterior del aparato de vídeo. 3. Conecte un cable de antena entre el terminal ANT OUT del aparato de vídeo y el terminal ANT IN del televisor. 4. Conecte un cable de vídeo entre el terminal AV IN 1 [Y/VIDEO] o AV IN 2 [VIDEO] del televisor y el terminal VIDEO OUT del aparato de vídeo. 5. Conecte cables de audio entre los terminales AV IN 1 (o AV IN 2) [R-AUDIO-L] del televisor y los terminales AUDIO OUT del aparato de vídeo Panel posterior del TV Panel lateral del TV Panel posterior del vídeo 2 5 Cable de audio (no suministrado) 4 Cable de audio (no suministrado) 3 Cable de audio (no suministrado) N Si tiene un vídeo “mono” (sin estéreo), use un conector Y (no suministrado) para conectar los terminales de entrada de audio derecho e izquierdo del TV. También se puede conectar el cable al terminal “R”. Si el vídeo es estéreo, tendrá que conectar dos cables. N Cada aparato de vídeo tiene una configuración diferente del panel posterior. N Cuando conecte un aparato de vídeo, debe hacer coincidir los colores del terminal de conexión y del cable. N Cuando se conecta a AV NI 1, el color (verde) del terminal AV IN 1 [Y/VIDEO] no coincide con el color (amarillo) del cable de vídeo. Español - 13 BN68-02269A_SPA.indd 13 2009-03-31 오후 12:58:48 Conexión de un sistema de audio digital Los terminales del panel posterior del televisor facilitan la conexión de un sistema de audio digital (Home Cinema/Receptor) al televisor. 1. Conecte un cable óptico entre los terminales DIGITAL AUDIO OUT (OPTICAL) y los terminales de entrada de audio digital (OPTICAL) del sistema de audio digital. Cuando un sistema de audio digital se conecta al terminal DIGITAL AUDIO OUT (OPTICAL): Reduzca el volumen del TV y ajuste el volumen con el control del sistema. Panel posterior del TV Sistema de audio digital Cable óptico (no suministrado) N El audio de 5.1 canales es posible cuando el televisor está conectado a un dispositivo externo que admita 5.1 canales. N Cada sistema de audio digital tiene una configuración diferente del panel posterior. N Cuando el receptor (sistema Home Cinema) está activado, se puede oír la salida de sonido desde el terminal óptico del televisor. Cuando se ve la televisión a través de un DTV (aéreo), el televisor envía el sonido de 5.1 canales al receptor del sistema Home Cinema. Cuando la fuente es un componente digital, como un DVD, y está conectada al televisor a través de HDMI, sólo se oye el sonido de 2 canales del receptor del sistema Home Cinema. Si desea oír audio de 5.1 canales, conecte el terminal DIGITAL AUDIO OUT (OPTICAL) del reproductor de DVD/Blu-ray o del decodificador por cable/satélite directamente a un amplificador o un sistema de Home Cinema, no al televisor. Conexión de un amplificador/DVD para Home Cinema 1. Conecte los cables de audio entre los terminales AUDIO OUT [R-AUDIO-L] del televisor y los terminales AUDIO IN [L-AUDIO-R] del amplificador/DVD para Home Cinema. Cuando conecte un amplificador de audio a los terminales AUDIO OUT [R-AUDIO-L]: Disminuya el volumen del TV y ajuste el nivel del volumen con el control del volumen del amplificador. Panel posterior del TV Amplificador/DVD del sistema Home Cinema Cablede audio (no suministrado) N Cada amplificador y sistema de DVD para Home Cinema tiene una configuración diferente del panel posterior. N Cuando conecte un amplificador o un sistema de DVD para Home Cinema, debe hacer coincidir los colores del terminal de conexión y del cable. Español - 14 BN68-02269A_SPA.indd 14 2009-03-31 오후 12:58:50 Conexión a un PC ❑ Uso del cable D-Sub 1. Conecte un cable D-Sub entre el terminal PC IN [PC] del televisor y el terminal de salida PC del ordenador. 2. Conecte un cable de audio PC entre el terminal PC IN [AUDIO] del televisor y el terminal Audio Out de la tarjeta de sonido del ordenador. Panel posterior del TV PC 2 Cable de audiodel ordenador (no suministrado) 1 Cable D-Sub (no suministrado) ❑ Uso del cable HDMI/DVI 1. Conecte un cable HDMI/DVI entre el terminal HDMI IN 2(DVI) del televisor y el terminal de salida PC del ordenador. 2. Conecte un cable estéreo miniclavija/2 RCA de 3,5 mm entre el terminal DVI AUDIO IN [L-AUDIO-R] del televisor y el terminal de salida de audio de la tarjeta de sonido del ordenador. Panel posterior del TV PC 2 Conector estéreo de 3,5 mm para el cable 2 RCA (no suministrado) 1 Cable HDMI/DVI (no suministrado) N Cada ordenador tiene una configuración diferente del panel posterior. N Cuando conecte un ordenador, debe hacer coincidir los colores del terminal de conexión y del cable. N Cuando se usa una conexión de cable HDMI/DVI, se debe conectar en el terminal HDMI IN 2(DVI). Español - 15 BN68-02269A_SPA.indd 15 2009-03-31 오후 12:58:51 Funcionamiento Encendido y apagado del televisor Pulse el botón POWER del mando a distancia. También puede usar el botón POWER del televisor. N El televisor puede tardar unos segundos en encenderse. Cambio de canales ❑ Utilización de los botones de canal Pulse los botones CH o CH para cambiar de canal. o CH , el televisor cambia los canales secuencialmente. Verá todos los canales que ha memorizado el TV. (Debe haber un mínimo de tres canales memorizados.) No verá los canales borrados o no memorizados. Consulte la página 20 para la memorización de los canales. N Cuando se pulsan los botones CH ❑ Utilización de los botones numéricos Utilice los botones numéricos para ir directamente a un canal. Por ejemplo, para seleccionar el canal “27”, pulse “2” y “7”. N Para cambiar rápidamente de canal, pulse los botones numéricos y después el botón ENTERE. ❑ Uso del botón “ ” El botón “ ” se utiliza para seleccionar emisoras que emitan con señal digital. Por ejemplo, para seleccionar el canal “7-1”, pulse “7”, “ ”, “1”. N Para cambiar rápidamente de canal, pulse los botones numéricos y después el botón ENTERE. ❑ Utilización del botón PRE-CH para seleccionar el canal anterior Utilice los botones numéricos para sintonizar rápidamente cualquier canal. Pulse el botón PRE-CH. El televisor cambiará al último canal visualizado. N Para cambiar rápidamente de un canal a otro que no es correlativo, sintonice un canal y utilice el botón numérico para seleccionar el segundo canal. A continuación, utilice el botón PRE-CH para alternar rápidamente entre ambos. Ajuste del volumen ❑ Utilización de los botones de volumen Pulse los botones VOL o VOL para subir o bajar el volumen. ❑ Uso del botón Mute Puede interrumpir el sonido en cualquier momento pulsando el botón MMUTE. 1. Pulse el botón MMUTE y se desconectará el sonido. se mostrará en la pantalla. 2. Para recuperar el sonido, vuelva a pulsar el botón MMUTE o pulse los botones VOL o VOL . Español - 16 BN68-02269A_SPA.indd 16 2009-03-31 오후 12:58:52 Uso del botón TOOLS Se puede usar el botón TOOLS para seleccionar rápida y fácilmente las funciones que se usan con más frecuencia. El menú Herramientas cambia según el modo de entrada externo que se está viendo. 1. Pulse el botón TOOLS. Aparece el menú Herramientas. 2. Pulse los botones ▲/▼ para seleccionar un menú y, a continuación, pulse el botón ENTERE. 3. Pulse los botones ▲/▼/◄/►/ENTERE para ver, cambiar o usar las opciones seleccionadas. Para ver una descripción más detallada de cada función, consulte la página correspondiente. Anynet+(HDMI-CEC), página 57 Modo Imagen, página 23 Modo Sonido, página 29 Temporizador, página 34 SRS TS HD, página 29 Add to Favorite (Añadir a favoritos) o Delete from Favorite (Borrar de favoritos), página 21 • Cambiar a Cable (o a Aire), página 20 • PIP, página 33 • Ajuste Automático, página 28 • • • • • • Tools Anynet+ (HDMI-CEC) Modo Imagen Modo Sonido Temporizador SRS TS HD Agregar a Favoritos Cambiar a Cable : Normal : Favorito : Apagado : Apagado U Mover E Ingresar e Salir Uso de los botones con luz de fondo del mando a distancia Use esta función en un entorno oscuro donde no sea posible ver los botones del mando a distancia con claridad. 1. Pulse el botón de iluminación ON/OFF ( ) N Si está en ON, la iluminación del botón se enciende durante unos momentos. N Si se pulsa un botón del mando a distancia cuando éste está activado, la iluminación del botón se enciende durante unos momentos. Si se toca o se mueve el mando a distancia y el sensor de éste lo detecta, la iluminación del botón se enciende durante unos momentos. N La iluminación del botón no se enciende si el mando a distancia está desactivado. Visualización de la pantalla La pantalla identifica el canal actual y el estado de algunos ajustes de audio-vídeo. 1. Pulse el botón INFO del mando a distancia. El televisor mostrará el canal, el tipo de sonido y el estado de ciertos ajustes de imagen y sonido. TV #1 Vie, Dic 19 2:05 am DTV Aire Dolby Digital M. Spillane’s Mike Hammer 13-1 Next Program 1080i 16:9 Español 1:55 am - 2:55 am Bonocrunch Prison Break 2:55 am - 3:55 am O Pulse el botón INFO otra vez o espere unos 10 segundos y desaparecerá automáticamente. Español - 17 BN68-02269A_SPA.indd 17 2009-03-31 오후 12:58:52 Visualización de los menús Antes de utilizar el televisor, siga los pasos que se explican a continuación para aprender a desplazarse por el menú a fin de seleccionar y ajustar las diferentes funciones. 1. Pulse el botón MENU. El menú principal se muestra en la pantalla. En el lado izquierdo hay los siguientes iconos: Imagen, Sonido, Canal, Configuración, Entrada, Aplicaciones, Soporte técnico. 2. Pulse los botones ▲ o ▼ para seleccionar uno de los iconos. Pulse los botones ◄ o ► para acceder al menú secundario de los iconos. 3. Pulse los botones ▲ o ▼ para desplazarse por las opciones del menú. Pulse el botón ENTERE para acceder a los elementos del menú. 4. Pulse los botones ▲/▼/◄/► para cambiar los elementos seleccionados. Pulse el botón RETURN para volver al menú anterior. 5. Pulse el botón EXIT para salir del menú. Uso de los botones del mando a distancia Botón MENU RETURN EXIT Función Botón Mostrar el menú principal de la pantalla. ▲/▼/◄/► Mover el cursor y seleccionar una opción. ENTERE Seleccionar la opción marcada. Confirmar la configuración. Volver al menú anterior. Salir del menú en pantalla. Función ❑ Ejemplo: Configuración del brillo del televisor en el menú de Imagen imagen Ajuste del brillo a 80 1. Pulse el botón MENU para ver el menú. Modo : Normal Luz de la celda :4 Contraste : 95 Brillo : 45 Definición : 50 Color : 50 Tinte (V/R) : V50/R50 ������� Configuración avanzada Imagen 2. Pulse el botón ENTERE para seleccionar Imagen. Modo : Normal Luz de la celda :4 Contraste : 95 Brillo : 45 Definición : 50 Color : 50 Tinte (V/R) : V50/R50 ������� ► Configuración avanzada Imagen Luz de la celda Contraste 3. Pulse los botones ▲ o ▼ para seleccionar Brillo. 4. Pulse el botón ENTERE. :4 : 95 Brillo : 45 Definición : 50 Color : 50 Tinte (V/R) : V50/R50 ► Configuración avanzada Opciones de imagen Reinicio de la imagen 5. Pulse los botones ◄ o ► hasta que el brillo cambie a 80. 6. Pulse el botón ENTERE. N Pulse el botón EXIT para salir del menú. Brillo Mover 45 Ajustar Ingresar Brillo Mover Regresar 80 Ajustar Ingresar Regresar Español - 18 BN68-02269A_SPA.indd 18 2009-03-31 오후 12:58:53 Función Plug & Play La primera vez que se enciende el nuevo televisor, se debe elegir la configuración básica del idioma, fuente de entrada y canales, y la hora del día por medio de la función Plug & Play. El televisor almacenará esta configuración en la memoria. El hecho de almacenar los cables en la memoria permite buscar los canales almacenados sin tener que introducir el número del canal cada vez que se desea cambiar de canal. N El salvapantallas se activa si durante más de 1 minuto no hay ninguna entrada desde el teclado del mando a distancia mientras Plug & Play está en ejecución. N El salvapantallas se activa si durante más de 15 minutos no se detecta ninguna señal de funcionamiento. 1. Pulse el botón POWER del mando a distancia. El menú Select Language of the OSD se muestra automáticamente. Seleccione el idioma con los botones ▲ o ▼. Pulsar el botón ENTERE para confirmar la selección. 2. Pulse los botones ◄ o ► para seleccionar Demo comercio o Uso domiciliario y, a continuación, pulse el botón ENTERE. Plug & Play Select Language of the OSD. Menu Language N Es recomendable configurar el televisor en el modo Uso domiciliario para obtener 3. 4. 5. 6. 7. 8. English : Español Français U Move E Enter la mejor imagen en un entorno doméstico. Plug & Play N El modo Demo comercio sólo es necesario en los entornos comerciales. Seleccione la fuente de antena a memorizar. N Si accidentalmente se configura la unidad en el modo Demo comercio y se desea ��������� volver a Uso domiciliario (normal): Pulse el botón del volumen del televisor. Cuando se muestra la OSD del volumen, mantenga pulsado el botón MENU del televisor durante 5 segundos. Iniciar Aire Se muestra el mensaje. Seleccionar las antenas que desea memorizar. U Move Enter Iniciar Cable Pulse los botones ▲ o ▼ para memorizar los canales de conexión seleccionada. Pulse el botón Auto Iniciar ENTERE para seleccionar Iniciar. • Aire: Señal de antena aire. U Mover E Ingresar Omitir • Cable: Señal de antena de cable. • Auto: Señales de antena aire y por cable. Plug & Play N En el modo Cable puede seleccionar el origen de señal correcto entre STD, HRC e IRC con La programación automática está en progreso. los botones ▲, ▼, ◄ o ►; a continuación, pulse el botón ENTERE. Si tiene cable digital, DTV Aire : 0 Aire : 0 seleccione la fuente de la señal del sistema de cable para analógica y para digital. Póngase Skip DTV Cable : 0 Cable : 0 Aire 13 en contacto con su proveedor de cable para averiguar el tipo de sistema de cable existente en su zona. 0% El TV empezará a memorizar todos los canales disponibles. N Para detener la búsqueda antes de que finalice, pulse el botón ENTERE con Detener Detener seleccionado. E Ingresar Omitir N Una vez guardados todos los canales disponibles, se inicia la eliminación de los canales codificados. Vuelve a mostrarse el menú de programación automática. Pulse el botón ENTERE cuando se complete la memorización de canales. Aparece automáticamente el mensaje Configure el modo de Reloj. Pulse el botón ENTERE. Pulse los botones ▲ o ▼ para seleccionar Auto y, a continuación, pulse el botón ENTERE. Se muestra el mensaje Configurar la hora de verano. Si selecciona Manual, se muestra Configurar fecha y hora actuales. Para obtener información detallada sobre Manual, consulte la página 34. Pulse los botones ▲ o ▼ para seleccionar Apagado, Encendido o Auto y, a continuación, pulse el botón ENTERE. Aparece automáticamente la imagen para seleccionar la zona horaria donde usted vive. Pulse los botones ▲ o ▼ para seleccionar la zona horaria y, a continuación, pulse el botónENTERE. Si ha recibido una señal digital, se ajustará la hora automáticamente. En caso negativo, consulte la página 34 para ajustar el reloj. Se muestra una breve instrucción sobre Cómo conseguir el mejor rendimiento del nuevo HDTV. Pulse el botón ENTERE. N Puede ir a la página anterior o siguiente con los botones ◄/►. N Puede acceder a la Guía de conexión HD en el menú Soporte técnico. 9. Aparecerá el mensaje Disfrute de su TV. N Si desea ver la televisión inmediatamente, seleccione Ver TV. N Si se desea ver Ver Guía producto, pulse el botón ENTERE. Si desea reiniciar esta función... N La función Plug & Play está disponible sólo en el modo TV. Configuración 1. Pulse el botón MENU para ver el menú. Pulse los botones ▲ o ▼ para seleccionar Configuración y, a continuación, pulse el botón ENTERE. 2. Pulse de nuevo el botón ENTERE para seleccionar Plug & Play. Para obtener más información sobre las opciones de configuración, vuelva a pulsar el botón ENTERE. Plug & Play Idioma ► : Español Tiempo Modo Juego : Apagado BD Wise : Encendido Tipo de red : Cable Configuración de red V-Chip Español - 19 BN68-02269A_SPA.indd 19 2009-03-31 오후 12:58:53 Control de los canales Almacenamiento de canales ❑ Antena → Aire/Cable T Pulse el botón TOOLS para mostrar el menú Herramientas. También puede conmutar entre antena aérea y de cable, seleccionando Herramientas → Switch to Cable Cambiar a Cable (o Aire) Channel Antes de empezar a memorizar los canales disponibles, debe indicar el tipo de origen de la señal conectada al TV (es decir, antena o sistema de cable). Antena : Aire ► Prog. Auto Borrar canal encriptado Lista de canales ❑ Prog. Auto Sintonia Fina • Aire: Señal de antena aire. • Cable: Señal de antena de cable. • Auto: Señales de antena aire y por cable. N Al seleccionar el sistema de TV de cable : Selecciona el sistema de cable. STD, HRC y IRC identifican los distintos tipos de sistemas de TV por cable. Póngase en contacto con su proveedor de cable para averiguar el tipo de sistema de cable existente en su zona. En este momento ya se ha seleccionado el origen de la señal. N Una vez guardados todos los canales disponibles, se inicia la eliminación de los canales codificados. Vuelve a mostrarse el menú de programación automática. N Si desea detener la programación automática, pulse el botón ENTERE. Aparece el mensaje ¿Detener programación automática?. Seleccione Sí con los botones ◄ o ► y, a continuación, pulse el botón ENTERE. ❑ Supresión de los canales encriptados (sólo canales digitales)) La función Borrar canal encriptado se usa para filtrar los canales codificados después de ejecutar la función Prog. Auto. Puede tardar de 20 a 30 minutos. N Para detener la búsqueda de canales codificados: Pulse el botón ENTERE para seleccionar Detener. Pulse el botón ◄ para seleccionar Sí, y, a continuación, pulse el botón ENTERE. N Esta función sólo está disponible en el modo Cable. ❑ Sintonía fina (sólo canales analógicos) Si la recepción es clara, no tendrá que ajustar la sintonización del canal porque esto Sintonia Fina se hace automáticamente cuando se ejecuta la función de búsqueda y memorización. Aire 7* Sintonia Fina Si la señal es débil o está distorsionada, puede que deba realizar manualmente la +5 sintonización fina del canal. Reiniciar N Los canales que se han ajustado con sintonización fina se marcan con un asterisco * UMover L Ajustar Regresar Guardar a la derecha del número de canal en la banda del canal. N Si no almacena en la memoria el canal que ha ajustado con la sintonía fina, los ajustes no se guardan. N Para restablecer la sintonía fina, pulse el botón ▼ para seleccionar Reiniciar; a continuación pulse el botón ENTERE. Español - 20 BN68-02269A_SPA.indd 20 2009-03-31 오후 12:58:53 Gestión de los canales ❑ Lista de canales Con este menú puede agregar y borrar los canales o configurarlos como favoritos y usar la guía de programas de las emisoras digitales. O Pulse el botón CH LIST del control remoto para que se muestre el menú Lista de canales. N Seleccione un canal en la pantalla Todos los canales, Canales agregados, • • • • Favoritos, o Grabación con temporizador con los botones ▲ o ▼ y pulse el botón ENTERE. A continuación puede ver el canal seleccionado. Todos los canales: Muestra todos los canales disponibles actualmente. Canales agregados: Muestra todos los canales añadidos. Favoritos: Muestra todos los canales favoritos. Grabación con temporizador: Muestra todos los programas actualmente reservados. Uso de los botones de colores en la lista de canales • Rojo (Antena): Conmuta entre TV, radio, datos/otros y todo. • Verde (Zoom): Amplía o disminuye el número del canal. • Amarillo (Seleccionar): Selecciona varias listas de canales. • TTOOLS (Herramientas): Muestra los menús Agregar o Borrar, Agregar a Favoritos o Borrar de Favoritos, Visualización con temporizador, Edición de nombre de canal, Seleccionar todo, Deseleccionar todos, y Prog. Auto (Los menús de opciones pueden variar según cada situación.) N Iconos de la pantalla de estado del canal ♥ Canal configurado como favorito. c Canal seleccionado al pulsar el botón amarillo. ) Un programa reservado ( Un programa que se está emitiendo. ❑ Menús de herramientas de la lista de canales (en Todos los canales/ N Pulse el botón TOOLS para usar el menú Herramientas. N Los elementos del menú de herramientas pueden variar según el estado del canal. Agregar a Favoritos/Borrar de Favoritos Puede configurar como favoritos los canales que vea con más frecuencia. T Pulse el botón TOOLS para mostrar el menú Herramientas. TV#6 7-1 TV#7 9-1 TV#7 Borrar 10-1 TV#10Visual. tempor. 19-1 Aire Antena Aire Aire 22 Aire Zoom Aire Selección T Herramientas ► Siguiente programa 6-1 TV#6 7-1 TV#7 9-1 TV#7 Borrar 10-1 TV#10Visual. tempor. 11-1 Antena TV#19Prog. Auto 21 Agregar a Favoritos TV#11Seleccionar todo 19-1 TV#19Prog. Auto 20 Aire 21 Aire 22 Aire 23 Aire Agregar a Favoritos TV#11Seleccionar todo 20 23 También puede configurar los canales favoritos seleccionando Herramientas →A gregar a Favoritos ( o Borrar de Favoritos ) N Se mostrará el símbolo “♥” y el canal se configurará como favorito. N Todos los canales seleccionados se mostrarán en el menú Favoritos. O Si desea seleccionar los canales favoritos que ha configurado, pulse el botón 6-1 11-1 Canales agregados Agregar/Borrar Puede suprimir o añadir un canal para que se muestren los canales que desee. N Todos los canales borrados se mostrarán en el menú Todos los canales. N Un canal de color gris quiere decir que se ha borrado. N El menú Agregar sólo aparece con los canales borrados. N También puede borrar un canal en los menús Canales agregados o Favoritos de la misma manera. Canales agregados Canales agregados/Favoritos) Zoom Aire Selección T Herramientas ► Siguiente programa FAV.CH en el mando a distancia. Canales agregados Visual. tempor Si reserva un programa que desea ver, el canal se cambia automáticamente al canal reservado en la lista de canales aunque esté viendo otro canal. Para reservar un canal primero debe configurar la hora actual. N Sólo se pueden reservar los canales memorizados. N Puede ajustar el canal, el día, el mes, el año, la hora y el minuto directamente pulsando los botones numéricos del mando a distancia. N La reserva de un programa se muestra en el menú Grabación con temporizador. N Guía de programas digitales y reserva de visualización: Si se ha seleccionado un canal digital y se pulsa el botón ► aparece la guía de programas del canal. Se puede reservar un programa mediante el procedimiento descrito anteriormente. 6-1 TV#6 7-1 TV#7 9-1 TV#7 Borrar 10-1 TV#10Visual. tempor. 11-1 19-1 Antena TV#11Seleccionar todo TV#19Prog. Auto 20 Aire 21 Aire 22 Aire 23 Aire Agregar a Favoritos Zoom Aire Selección T Herramientas ► Siguiente programa Español - 21 BN68-02269A_SPA.indd 21 2009-03-31 오후 12:58:54 Edición de nombre de canal (sólo canales analógicos) Los canales se pueden etiquetar con el propósito de que al seleccionar éstos se pueda ver su nombre. N Los nombres de los canales digitales se asignan automáticamente y no se pueden etiquetar. Seleccionar todo/Deseleccionar todos Puede seleccionar (o deseleccionar) todos los canales de la lista. N Puede aplicar la función de Agregar/Borrar, Agregar a favoritos/Borrar de favoritos a varios canales al mismo tiempo. Seleccione los canales que desee y pulse el botón amarillo para configurar los canales seleccionados al mismo tiempo. N La marca c aparece a la izquierda de los canales seleccionados. N Sólo se puede seleccionar Deseleccionar todos si hay canales seleccionados. Prog. Auto Si desea más detalles sobre las opciones de configuración, Consulte la página 20. temporizador) Se puede ver, cambiar o borrar una reserva. N Pulse el botón TOOLS para usar el menú Herramientas. Cambiar información Selecciónelo para cambiar la reserva de visualización. Cancelar programaciones Selecciónelo para cancelar la reserva de visualización. Grabación con temporizador ❑ Menú de herramientas de la lista de canales (en Grabación con 12/10/2009 4:34 am 103 Cambiar información 4 : 35 am 8 Información 8 Cancelar progr. Seleccionar todo Aire Antena Información Selecciónelo para ver una reserva de visualización. También puede cambiar la información de la reserva. Seleccionar todo/Deseleccionar todos Zoom Selección T Herramientas E Información Puede seleccionar o deseleccionar todos los canales de la lista. Español - 22 BN68-02269A_SPA.indd 22 Continúa… 2009-03-31 오후 12:58:54 Control de la imagen Cambio del tamaño de la imagen ❑ Modo Imagen Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualización. • Dinámico: Selecciona una imagen de alta definición para entornos muy iluminados. • Normal: Selecciona la mejor visualización de la imagen para entornos normales. Esta configuración es la más conveniente en la mayoría de situaciones. • Eco: Selecciona la visualización óptima y más confortable de la imagen. N Con este modo se reduce el consumo de energía. N Eco no está disponible en el modo PC. Modo :Normal Luz de la celda :4 Contraste : 95 Brillo : 45 Definición : 50 Color : 50 Tinte (V/R) : V50/R50 ► Configuración avanzada • Cine: Selecciona una visualización de imagen confortable en entornos oscuros. T Pulse el botón TOOLS para ver el menú Herramientas. Modo Imagen También se puede configurar el modo de la imagen seleccionando Herramientas → Modo de imagen. ❑ Luz de la celda/Contraste/Brillo/Definición/Color/Tinte (V/R) : Normal Luz de la celda : 4 Contraste : 95 Brillo : 45 ► Definición : 50 El televisor tiene varias opciones de configuración que permiten controlar la calidad de la Color : 50 imagen. Tinte (V/R) : V50/R50 • Luz de la celda: Ajusta el brillo de los píxeles. Configuración avanzada • Contraste: Ajusta el nivel de contraste. Opciones de imagen • Brillo: Ajusta el nivel de brillo. • Definición: Ajusta el nivel de nitidez. • Color: Ajusta la saturación del color de la imagen mediante la barra de la pantalla. • Tinte (V/R): Ajusta el matiz de los colores de la imagen compensando el rojo y el verde. N Cuando se cambian Luz de la celda, Contraste, Brillo, Definición, Color o Tinte (V/R), la presentación en la pantalla OSD se ajusta consecuentemente. N Los valores ajustados se guardan para cada modo de imagen. N En el modo PC, sólo se pueden realizar cambios en las opciones Luz de la celda, Contraste y Brillo. N Cada valor ajustado se almacenará por separado según su modo de entrada. N Este televisor incluye la función Luz de la celda para ajustar el brillo del panel. N La energía consumida durante el uso se puede reducir significativamente si se disminuye el nivel del brillo. Puede mejorar la profundidad de la imagen ajustando la densidad del color negro. N Configuración avanzada está disponible en los modos Normal o Cine. N En el modo PC, sólo se pueden cambiar Contraste Dinám., Gamma y Balance de blanco entre los elementos de Configuración avanzada. Tono del negro Se puede seleccionar el nivel de negro en la pantalla para ajustar la profundidad de ésta. • Apagado: Desactiva la función de ajuste del negro. • Oscuro: Establece la profundidad del color negro en un nivel oscuro. • Más oscuro: Establece la profundidad del color negro en un nivel más oscuro. • El más oscuro: Establece la profundidad del color negro en el nivel más oscuro. Contraste Dinám. Se puede ajustar el contraste de la pantalla para conseguir un contraste óptimo. • Apagado: Desactiva la función de contraste dinámico. • Bajo: Establece el contraste dinámico en un nivel bajo. • Medio: Establece el contraste dinámico en un nivel medio. • Alto: Establece el contraste dinámico en un nivel alto. Imagen ❑ Configuración avanzada Color : 50 Tinte (V/R) : V50 / R50 Configuración avanzada ► Opciones de imagen Reinicio de la imagen Configuración avanzada Tono del negro : Apagado Contraste Dinám. : Medio Gamma :0 Espacio de color : Nativo ► Balance de blanco Tono Piel :0 Mejora de perfiles U Mover : Encendido E Ingresar R Regresar Gamma Puede ajustar el nivel medio de la luminancia. Continúa… Español - 23 BN68-02269A_SPA.indd 23 2009-03-31 오후 12:58:54 Espacio de color El espacio de color es una matriz de color compuesta por los colores rojo, verde y azul. Seleccione su gama favorita de color y disfrute de unos colores auténticamente naturales. • Auto: Configura automáticamente la gama de color de acuerdo con la fuente del vídeo de entrada. • Nativo: Configura una gama de color más amplia que la de la fuente del vídeo de entrada. • Favorito: Ajusta la gama del color según las preferencias del usuario. N Personalización del espacio de color - Ajuste la gama del color según sus preferencias. Color está disponible cuando el Espacio de color está configurado como Favorito. - Color : Rojo / Verde / Azul / Amarillo / Cian / Magenta. - Rojo / Verde / Azul: Puede ajustar los valores RGB del color seleccionado. - Reiniciar: Restablece la gama de colores en los valores predeterminados. Balance de blanco Se puede ajustar la temperatura del color para conseguir colores más naturales. • Bal. Rojo: Ajusta la intensidad del rojo en un nivel bajo. • Bal. Verde: Ajusta la intensidad del verde en un nivel bajo. • Bal. Azul: Ajusta la intensidad del azul en un nivel bajo. • Gan. Rojo: Ajusta la intensidad del rojo en un nivel alto. • Gan. Verde: Ajusta la intensidad del verde en un nivel alto. • Gan. Azul: Ajusta la intensidad del azul en un nivel alto. • Reiniciar: Restablece el balance de blancos predeterminado. N El cambio del valor de ajuste actualizará la pantalla ajustada. Tono Piel Puede ajustar el tono de piel para que sea más o menos rojo. N El cambio del valor de ajuste actualizará la pantalla ajustada. Mejora de perfiles → Apagado/Encendido Permite acentuar los bordes de los objetos en las imágenes. xvYCC ��������������������� →�������������������� Apagado / Encendido Si ajusta el modo xvYCC como Encendido, se aumenta el detalle y el espacio de color mientras se ven películas desde un dispositivo externo (por ejemplo, un reproductor de DVD) conectado a los terminales HDMI o Component IN. N xvYCC está disponible cuando el modo de imagen está configurado como Película y la entrada externa está en los modos HDMI o Componente. Balance de blanco Bal. Rojo 25 ▶ Bal. Verde 25 Bal. Azul 25 Gan. Rojo 25 Gan. Verde 25 Gan. Azul 25 Reiniciar U Mover ❑ Opciones de imagen E Ingresar Tinte (V/R) Tono Color → Frío/Normal/Tibio1/Tibio2/Tibio3 Puede seleccionar el tono de color que le resulte más cómodo para la vista. N Tibio1, Tibio2 o Tibio3 sólo están disponibles cuando el modo de imagen es Cine. N La configuración de cada dispositivo externo conectado a la entrada del televisor se puede ajustar y guardar. Tamaño Es posible que alguna vez desee cambiar el tamaño de la imagen en la pantalla. El televisor se suministra con seis opciones de tamaño de la pantalla, cada una diseñada para que funcione lo mejor posible con tipos específicos de entrada de vídeo. Es posible que el receptor de satélite tenga también su propia gama de tamaños de pantalla. Sin embargo, en general, debe ver el televisor en el modo 16:9 tanto como sea posible. • 16:9: Configura la imagen en una relación de aspecto 16:9. • Zoom1: Alarga verticalmente la relación de aspecto 16:9. • Zoom2: Alarga verticalmente una imagen ampliada con la función Zoom1. • Ajuste ancho: Alarga horizontal y verticalmente una imagen para mostrarla mejor. • 4:3: Configura la imagen en una relación de aspecto 4:3. • Ajuste pantalla: Muestra la señal HD nativa completa que no se puede ver en un televisor normal. O Pulse el botón P.SIZE para cambiar el tamaño de la pantalla. N Cada valor ajustado se almacenará por separado según su modo de entrada. Imagen Puede personalizar los parámetros de imagen adicionales según sus preferencias personales. N En el modo PC sólo se pueden cambiar Tono Color, Tamaño y Protección de pantalla entre los elementos de Opciones de imagen. R Regresar : V50/R50 Configuración avanzada Opciones de imagen ► Reinicio de la imagen Opciones de imagen Tono Color : Normal Tamaño : 16:9 Digital NR : Auto N.neg HDMI : Normal Demo mov. Full HD 1080 : Normal Modo película : Apagado Sólo modo azul U Mover ► : Apagado d E Ingresar R Regresar Continúa… Español - 24 BN68-02269A_SPA.indd 24 2009-03-31 오후 12:58:54 16:9 Ajuste ancho Zoom1 4:3 Zoom2 Ajuste a pantalla N Las opciones disponibles pueden diferir según el modelo seleccionado. N Puede producirse una retención temporal de imagen cuando se ve una imagen estática durante más de dos horas. N Después de seleccionar Zoom1, Zoom2 o Ajuste ancho: Pulse los botones ◄ o ► para seleccionar Posición y, a continuación, pulse el botón ENTERE. Pulse los botones ▲ o ▼ para desplazar la imagen hacia arriba o hacia abajo. Reiniciar : Pulse los botones ◄ o ► para seleccionar Reiniciar y, a continuación, pulse el botón ENTERE. Puede inicializar la configuración. N Después de seleccionar Ajuste a pantalla en los modos HDMI (1080i/1080p) o Componente (1080i/1080p): Seleccione la posición con los botones ◄ o ►. Use los botones ▲, ▼, ◄ o ► para mover la imagen. Reiniciar: Pulse los botones ◄ o ► para seleccionar Reiniciar y, a continuación, pulse el botón ENTERE. El televisor recupera la relación 16:9. N Use esta función para ver toda la imagen sin cortes cuando se reciban señales de HDMI (720p/1080i/1080p), componente (1080i/1080p) o DTV (1080i). N HD (alta definición): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720) N When Double ( , ) mode has been set in PIP, the Picture Size cannot be set. N Image retention may occur when viewing a static (non-moving) image on the set for an extended period of time. Fuente de entrada Tamaño de imagen ATV, Vídeo, Componente (480i, 480p) DTV(720p), Componente (720p) 16:9, Zoom1, Zoom2, 4:3 16:9, Ajuste ancho, 4:3 16:9, 4:3, Ajuste ancho, Ajuste a pantalla 16:9, 4:3 DTV(1080i), Componente (1080i, 1080p), HDMI (720p, 1080i, 1080P) PC Digital NR Si la señal de emisión que recibe el TV es débil, puede activarse la función Digital NR (Reducción digital del ruido) para reducir la estática y las imágenes superpuestas que pueden aparecer en la pantalla. • Apagado: Desactiva la función de reducción de ruido digital. • Bajo: Configura la reducción de ruido digital en el nivel bajo. • Medio: Configura la reducción de ruido digital en el nivel medio. • Alto: Configura la reducción de ruido digital en el nivel alto. • Auto: Configura la reducción de ruido digital en Automático. Opciones de imagen Tono Color : Normal Tamaño : 16:9 Digital NR : Auto N.neg HDMI : Normal Demo mov. Full HD 1080 : Apagado Modo película : Apagado Sólo modo azul U Mover ► : Apagado d E Ingresar R Regresar N.neg HDMI Se puede seleccionar directamente el nivel de negro en la pantalla para ajustar la profundidad de ésta. • Normal: La pantalla se ve más brillante. • Bajo: La pantalla se ve más oscura. N Esta función sólo está activa cuando un dispositivo externo está conectado al televisor a través de HDMI. N La función N.neg HDMI puede que no sea compatible con todos los dispositivos externos. Demostración de movimiento Full HD 1080 → Apagado / Encendido Los paneles PDP de nueva generación de Samsung proporcionan una asombrosa claridad de movimiento Full HD cuando se ven deportes, películas y juegos muy dinámicos. N Esta función sólo está disponible en los modos PC, Juego, o Reproducción multimedia. Continúa… Español - 25 BN68-02269A_SPA.indd 25 2009-03-31 오후 12:58:56 Modo película Puede optimizar el modo de imagen para ver películas. • Apagado: Desactiva la función del modo de película. • Auto1: Ajusta automáticamente la imagen con la mejor calidad cuando se ve una película. • Auto2 : Mejora automáticamente el texto de vídeo cuando se ven películas. • Cinema Smooth: Proporciona la sensación de cine definitiva. N Esta función sólo está disponible cuando se conecta una entrada externa a HDMI(1080p, 24Hz). N Modo película es compatible con TV, Vídeo, Componente (480i/1080i) y HDMI (1080i). Sólo modo azul → Apagado / Encendido Esta función es para los expertos en mediciones de dispositivos AV. Esta función muestra sólo la señal azul ya que se eliminan las señales rojas y verdes de la señal de vídeo a fin de proporcionar un efecto de filtro azul que se usa para ajustar el color y el matiz de los equipos de vídeo, como reproductores DVD, sistemas Home Cinema, etc. N Sólo modo azul está disponible cuando el modo de imagen está configurado como Cine o Normal. Opciones de imagen ▲ Tamaño : 16:9 Digital NR : Auto N.neg HDMI : Normal Demo mov. Full HD 1080 : Apagado Modo película : Apagado Sólo modo azul : Apagado Protección de pantalla Configura las opciones de Protección de pantalla para evitar y reducir el quemado de píxeles. Cuando una imagen permanece en una posición por mucho tiempo, puede ocasionar un quemado permanente en la pantalla. Protección de pantalla Prevención del desgaste de la pantalla Lateral gris U Mover TV/AV/Componente/HDMI/PC Horizontal 0~2 2 Vertical 0~4 4 Tiempo (min) 1~4 min. 2 min. E Ingresar R Regresar Protección de pantalla Cambio de píxel ► Desplazamiento Esta pantalla está equipada con tecnología de prevención para reducir la posibilidad de que se queme. Esta tecnología permite definir el movimiento de la imagen arriba o abajo (línea vertical) y de lado a lado (punto horizontal). El ajuste del tiempo permite programar intervalos temporales entre los movimientos de la imagen en minutos. • Cambio de píxel: Mueve la imagen para prevenir y reducir la quemadura de los píxeles. N Condición óptima para cambio de píxel: Elemento ► : Claro U Mover E Ingresar R Regresar N El valor Cambio de píxel puede variar según el tamaño (pulgadas) del monitor y el modo. • Lateral gris: Cuando se ve la televisión con una relación de pantalla de 4:3, ésta se puede proteger de un posible daño si se ajusta el balance de blanco en ambos extremos, el izquierdo y el derecho. Para prevenir que la pantalla se queme, seleccione Oscuro o Claro. - Claro: Cuando se establece una relación de pantalla de 4:3, con esta opción se aclaran ambos extremos, el izquierdo y el derecho. - Oscuro: Cuando se establece una relación de pantalla de 4:3, con esta opción se oscurecen ambos extremos, el izquierdo y el derecho. N Para eliminar los restos de imágenes de la pantalla, utilice la función Desplazamiento. N Pulse cualquier tecla del mando a distancia para cancelar esta función. Reducción de los efectos de una pantalla quemada Si la pantalla se ha quemado, puede seleccionar desplazamiento o lateral gris para que le ayude a retirar los elementos quemados. • Desplazamiento: Esta función suprime los restos de imágenes en la pantalla moviendo todos los píxeles del PDP de acuerdo con un patrón. Utilice esta función cuando haya restos de imágenes o símbolos en la pantalla, especialmente cuando se muestren imágenes fijas en la pantalla durante mucho tiempo. (aproximadamente 1 hora) N La función de supresión de restos de imágenes debe aplicarse durante largo tiempo (aproximadamente 1 hora) para que sea efectiva. Si los restos de imágenes no desaparecen después de ejecutar la función, repita el proceso. ❑ Reinicio de la imagen → Reinic. modo imagen/Cancelar N Seleccione un modo de imagen que desee restaurar. La restauración se realiza en cada modo de imagen. Configuración avanzada Imagen Restablece todos los ajustes predeterminados. Opciones de imagen Reinicio de la imagen ► Español - 26 BN68-02269A_SPA.indd 26 2009-03-31 오후 12:58:57 Pantalla de PC Uso del televisor como una pantalla de ordenador (PC) Configuración del software del PC (basado en Windows XP) A continuación se muestra la configuración de pantalla de Windows para un ordenador típico. Probablemente la pantalla real de su PC sea distinta, según la versión concreta de Windows y de la tarjeta de vídeo que tenga. Aunque las pantallas reales sean diferentes, la información de configuración básica que se aplica en casi todos los casos es la misma. (En caso contrario, póngase en contacto con el fabricante del ordenador o con el distribuidor de Samsung.) 1. Primero, haga clic en Panel de control en el menú de inicio de Windows. 2. Cuando aparezca la ventana del panel de control, haga clic en Apariencia y temas y aparecerá un cuadro de diálogo. 3. Cuando aparezca la ventana del panel de control, haga clic en Pantalla y aparecerá un cuadro de diálogo. 4. Vaya a la pestaña Configuración en el cuadro de diálogo. Configuración correcta del tamaño (resolución) óptima: 1920 x 1080 píxeles Si existe una opción de frecuencia vertical en el cuadro de diálogo de configuración de la pantalla, el valor correcto es de 60 o 60 Hz. Si no, haga clic en Aceptar y salga del cuadro de diálogo. Modos de pantalla Si la señal del sistema es igual al modo de señal estándar, la pantalla se ajusta automáticamente. Si la señal del sistema no es igual al modo de señal estándar, ajuste el modo consultando la guía del usuario de la tarjeta de vídeo; de lo contrario, puede no haber señal de vídeo. La imagen de pantalla se ha optimizado durante la fabricación para los siguientes modos de visualización. Entradas D-Sub y HDMI/DVI Modo Resolución Frecuencia horizontal (kHz) Frecuencia vertical (Hz) Frecuencia de reloj de píxeles (MHz) Polaridad sincr. (H/V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 +/-/+ MAC 640 x 480 832 x 624 1152 x 870 35.000 49.726 68.681 66.667 74.551 75.062 30.240 57.284 100.000 -/-/-/+ VESA CVT 720 x 576 1152 x 864 1280 x 720 1280 x 720 1280 x 960 35.910 53.783 44.772 56.456 75.231 59.950 59.959 59.855 74.777 74.857 32.750 81.750 74.500 95.750 130.000 -/+ -/+ -/+ -/+ -/+ VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 800 1280 x 800 1280 x 960 1280 x 1024 1280 x 1024 1360 x 768 1440 x 900 1440 x 900 1680 x 1050 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 49.702 62.795 60.000 63.981 79.976 47.712 55.935 70.635 65.290 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 59.810 74.934 60.000 60.020 75.025 60.015 59.887 74.984 59.954 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 83.500 106.500 108.000 108.000 135.000 85.500 106.500 136.750 146.250 -/-/-/+/+ +/+ +/+ -/-/+/+ +/+ -/+ -/+ +/+ +/+ +/+ +/+ -/+ -/+ -/+ VESA GTF 1280 x 720 1280 x 1024 52.500 74.620 70.000 70.000 89.040 128.943 -/+ -/- VESA DMT/ DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+ N N N N N Cuando se usa una conexión de cable HDMI/DVI, se debe conectar en el terminal HDMI IN 2(DVI). No se admite el modo entrelazado. El aparato puede funcionar incorrectamente si se selecciona un formato de vídeo que no sea estándar. Los modos Independiente y Compuesto no se admiten. SOG no se admite. Un cable VGA demasiado largo o de mala calidad puede provocar que se vea la imagen con ruido en los modos de resolución alta (1920 x 1080). Español - 27 BN68-02269A_SPA.indd 27 2009-03-31 오후 12:58:57 Ajuste del televisor con el ordenador N Preselección: Pulse el botón SOURCE para seleccionar el modo PC. ❑ Ajuste Automático T Pulse el botón TOOLS para mostrar el menú Herramientas. También puede establecer el ajuste automático seleccionando Herramientas → Ajuste Automático. Imagen Mediante la función Ajuste Automático se puede establecer que el televisor se ajuste automáticamente de acuerdo con las señales de vídeo que reciba. Esta función también ajusta automáticamente la configuración, los valores de frecuencia y la posición. Brillo : 45 Definición : 50 Ajuste Automático ► Pantalla Configuración avanzada Opciones de imagen Reinicio de la imagen N Esta función no se puede utilizar en modo DVI-Digital. ❑ Pantalla Pantalla El objetivo del ajuste de la calidad de imagen es eliminar o reducir las interferencias. Si no se eliminan mediante la sintonización fina, ajuste la frecuencia vertical en el PC y vuelva a realizar la sintonización fina. Cuando se hayan reducido las interferencias, vuelva a ajustar la imagen de forma que esté centrada en la pantalla. Grueso Ajusta la frecuencia si hay distorsiones verticales en la pantalla. Grueso 50 Fino 4 Posición de PC Reiniciar Imagen U Mover E Ingresar R Regresar Posición de PC Fino Ajusta la pantalla para que sea más clara. Posición de PC Ajuste la posición de la pantalla del PC si no se acopla a la pantalla del TV. Pulse los botones ▲ o ▼ para ajustar la posición vertical. Pulse los botones ◄ o ► para ajustar la posición horizontal. Reiniciar Imagen Puede recuperar todos los ajustes de imagen predeterminados de fábrica. n Ajustar E Ingresar R Regresar Español - 28 BN68-02269A_SPA.indd 28 2009-03-31 오후 12:58:57 Control del sonido Cambio de la configuración del sonido ❑ Modo Sonido Puede seleccionar el tipo de efecto de sonido especial que se va a utilizar mientras ve una emisión determinada. • Normal: Este modo de sonido es de aplicación general. • Música: El modo Música permite oír música como si se estuviera en una sala de conciertos. • Cine: El modo Cine proporciona un sonido completo de película en directo como si se estuviera en una sala de cine. • Voz clara: Realza las voces respecto de los sonidos. Seleccione este modo de sonido para ver noticiarios, telenovelas o documentales. • Favorito: Puede personalizar los ajustes de sonido para que se ajusten a sus preferencias personales. Modo ❑ Ecualizador Es posible ajustar los parámetros del sonido según las preferencias personales. • Modo: Selecciona el modo de sonido entre los valores predefinidos. • Balance: Ajusta el balance entre los altavoces izquierdo y derecho. • 100Hz, 300Hz, 1kHz, 3kHz, 10kHz (Ajuste del ancho de banda): Ajusta el nivel de las diferentes frecuencias de ancho de banda. • Reiniciar: Restablece todos los ajustes predeterminados del ecualizador. ► SRS TruSurround HD : Apagado Idioma preferido : Español Sonido Multi-track : Estéreo Vol.Auto : Apagado Seleccionar altavoz : Altavoz de TV Sel. Sonido : Principal Ecualizador T Pulse el botón TOOLS para ver el menú Herramientas.. También puede configurar el modo del sonido seleccionando Herramientas → Modo de sonido : Favorito Ecualizador Modo : Favorito ► Balance L R 100Hz - + 300Hz - + 1KHz - + 3KHz - 10KHz - + + ▼ U Mover E Ingresar R Regresar ❑ Trusurround SRS HD → Apagado/Encendido SRS TruSurround HD es la tecnología combinada de TruSurround y FOCUS, TruBass. SRS TruSurround HD permite disfrutar de sonido surround virtual de 5.1 canales a través de los dos altavoces del televisor. Esta función proporciona no sólo bajos profundos sino que también mejora la resolución de las frecuencias altas. T Pulse el botón TOOLS para mostrar el menú Herramientas. También puede ajustar SRS TruSurround HD seleccionando Herramientas → SRS TS HD. TruSurround HD, SRS y el símbolo son marcas registradas de SRS Labs, Inc. La tecnología TruSurround HD está incorporada bajo licencia de SRS Labs, Inc. ❑ Idioma preferido (Sólo canales digitales) El sistema de emisión de TV digital permite transmitir simultáneamente muchas pistas de audio (por ejemplo, traducciones simultáneas del programa en otros idiomas). N Sólo se puede seleccionar uno de los idiomas que ofrece la emisora. O Puede seleccionar un idioma que no sea el Idioma preferido pulsando el botón MTS del mando a distancia. ❑ Sonido Multi-track (analógicos) (Sólo canales analógicos) Según el programa concreto emitido, puede escuchar en modo mono, estéreo o SAP. • Mono: Configura el sonido como mono. • Estéreo: Configura el sonido como estéreo. • SAP: Configura el sonido para el programa de audio secundario. O Pulse varias veces el botón MTS del mando a distancia para seleccionar Mono, Estéreo o SAP. ❑ Vol.Auto → Apagado/Encendido Cada emisora tiene sus propias condiciones de señal y resulta incómodo ajustar el volumen cada vez que se cambia de canal. Esta función permite ajustar automáticamente el volumen de un canal disminuyendo la salida de sonido cuando la señal de modulación es alta o aumentando la salida de sonido cuando la señal de modulación es baja. Continúa… Español - 29 BN68-02269A_SPA.indd 29 2009-03-31 오후 12:58:57 ❑ Seleccionar altavoz Sonido Se puede configurar para tener salida de sonido de los altavoces internos del televisor o de los altavoces conectados a un sistema de sonido. • Altavoz externo: Utiliza los altavoces externos (Home Cinema) para la salida de sonido. • Altavoz de TV: Utiliza los altavoces del TV para la salida de sonido. N Si se selecciona Altavoz externo en el menú Seleccionar altavoz, se limita la configuración del sonido. N Los botones de volumen y MMUTE no funcionan si Seleccionar altavoz está establecido en Altavoz externo. Configure el volumen del sistema Home Cinema. Sonido Multi-track : Estéreo Vol.Auto : Apagado Seleccionar altavoz : Altavoz de TV ► Sel. Sonido : Principal Reinicio del sonido Altavoces internos del televisor Salida de audio (Optical, R/L Out) para el sistema de sonido TV/AV/Componente/PC/HDMI TV/AV/Componente/PC/HDMI Altavoz de TV Salida para altavoces Salida de sonido Altavoz externo Silencio Salida de sonido Sin señal del vídeo Silencio Silencio ❑ Sel. Sonido Cuando se activa la función PIP se puede escuchar el sonido de la imagen secundaria (PIP). Principal Se usa para escuchar el sonido de la imagen principal. Sub Se usa para escuchar el sonido de la imagen secundaria. T Pulse el botón TOOLS para usar el menú Herramientas. También puede configurar el sonido de la imagen secundaria seleccionando Herramientas → PIP → Sel. Sonido. N Puede seleccionar esta opción cuando PIP está ajustado como Encendido. ❑ Reinicio del sonido Reiniciar todo / Reinic. modo sonido / Cancelar Puede restaurar la configuración del sonido con los valores predeterminados de fábrica. Descripción de las funciones Configuración del menú de configuración ❑ Idioma ❑ Modo Juego → Apagado/Encendido Si se conecta a una consola de videojuegos como PlayStationTM o XboxTM, podrá obtener sensaciones más realistas seleccionando el menú de juegos. Configuración Se puede configurar el idioma de los menús. Plug & Play Idioma : Español ► Tiempo Modo Juego : Apagado BD Wise : Encendido Tipo de red : Cable Configuración de red Si el modo Juego está encendido V-Chip • El modo Imagen cambia automáticamente a Normal y no se puede cambiar. Subtítulo • El modo Sonido cambia automáticamente a Favorito y no se puede cambiar. Ajuste el sonido con el ecualizador. • La función Reiniciar se activa en el menú Sonido. Si, tras configurar el ecualizador, selecciona la función Reiniciar, se restauran los parámetros de fábrica de la configuración del ecualizador. N Modo Juego no está disponible en el modo normal de TV o Modo Juego está establecido como Apagado. N Si la calidad de la imagen es deficiente cuando un dispositivo externo está conectado al televisor, compruebe si la opción Modo Juego está establecida como Encendido. N Cuando se muestra el menú de TV en el Modo Juego, la pantalla tiembla ligeramente. N La marca ( ) que aparece en la pantalla indica que la opción Modo Juego está activa con la fuente seleccionada. N Modo Juego no está disponible en el modo PC. Continúa… Español - 30 BN68-02269A_SPA.indd 30 2009-03-31 오후 12:58:58 ❑ BD Wise → Apagado / Encendido Proporciona una calidad óptima de imagen para los productos DVD, Blu-ray y Home Cinema de SAMSUNG compatibles con BD Wise. Cuando se utilizan conectados a este televisor Samsung permiten disfrutar de mejores imágenes. N Conecte los productos SAMSUNG con BD Wise mediante un cable HDMI N Esta función sólo está activa cuando un dispositivo externo está conectado al televisor a través de HDMI. N Si BD Wise se ha configurado en Encendido, el modo de imagen se cambia automáticamente a la resolución óptima. ❑ V-Chip La opción V-Chip bloquea automáticamente los programas que no se consideran apropiados para los menores. El usuario debe introducir primero un código PIN (número de identificación personal) para configurar o cambiar las restricciones de V-Chip. N La función V-Chip no está disponible en los modos HDMI, Componente o PC. N El código PIN predeterminado para un televisor nuevo es ‘0-0-0-0’. N Si olvida el PIN, pulse los botones del mando a distancia en la siguiente secuencia para reiniciar el código a ‘0-0-0-0’: Apagar → M MUTE → 8 → 2 → 4 → Encender. N Perm. todo: Se pulsa para desbloquear todos los programas de televisión. N Bloq. todo: Se pulsa para bloquear todos los programas de televisión. V-Chip Bloqueo V-Chip : Encendido ► Guías pater. TV Clas. MPAA Inglés Canadiense Francés Canadiense Clasificación U.S. Descargable Cambiar Código U Mover E Ingresar R Regresar Bloqueo V-Chip → Apagado/Encendido Desactiva la función V-Chip. Guías pater. TV Guías pater. TV Puede bloquear los programas de TV según su clasificación. Esta función permite controlar lo que los niños pueden ver. Perm. todo • Categorías básicas Bloq. todo TV-Y: Niños pequeños/TV-Y7: Niños de más de 7 años/TV-G: Todos los públicos/ TV-PG: Supervisión paterna/TV-14: Mayores de 14 años/TV-MA: Audiencia adulta • Subclasificaciones All (Todos): Bloquea todas las clasificaciones de TV. / FV: Violencia y fantasía/V: Violencia/S: Contenido sexual /L: Lenguaje grosero/D: Diálogo de contenido sexual n Mover E Ingresar R Regresar N Las categorías TV-Y, TV-Y7, TV-G, TV-PG, TV-14 y TV-MA disponen de opciones adicionales. Consulte el siguiente paso para cambiar cualquiera de las siguientes clasificaciones secundarias. N La función V-Chip bloqueará automáticamente cualquier categoría que sea más restrictiva. Por ejemplo, si bloquea la categoría TV-Y, automáticamente se bloqueará TV-Y7. De forma similar, si bloquea la categoría TVG, todas las categorías del grupo adultos jóvenes se bloquearán (TV-G, TV-PG, TV-14-14 y V-MA). Las subclasificaciones (D, L, S, V) funcionan de manera similar. Clas. MPAA Puede bloquear las películas según su clasificación. El sistema de clasificación MPAA utiliza el sistema de la Motion Picture Association of America (Asociación americana de cinematografía) y se aplica principalmente en las películas. • G: Todos los públicos (sin restricciones). • PG: Se sugiere la compañía de un adulto. • PG-13: Menores acompañados de un adulto. • R: Restringido. Menores de 17 acompañados por un adulto. • NC-17: Prohibido a menores de 17 años. • X: Sólo adultos. • NR: Sin clasificar. N El V-Chip bloqueará automáticamente cualquier categoría que sea más restrictiva. Por ejemplo, si bloquea la categoría PG-13, también se bloquearán automáticamente R, NC-17 y X. Clas. MPAA Perm. todo Bloq. todo n Mover E Ingresar R Regresar Inglés Canadiense Puede bloquear los programas de TV según la clasificación Inglés Canadiense. • C: Programación para niños menores de 8 años. • C8+: Programación generalmente considerada aceptable para niños mayores de 8 años sin acompañamiento de adultos. • G: Programación general, ideal para todas las audiencias. • PG: Supervisión paterna. • 14+: La programación contiene temas y contenidos que puede que no sean adecuados para menores de 14 años. • 18+: Programación para adultos. N El V-Chip bloqueará automáticamente cualquier categoría que sea más restrictiva. Por ejemplo, si bloquea la categoría G, automáticamente también se bloqueará PG, 14+ y 18+. Continúa… Español - 31 BN68-02269A_SPA.indd 31 2009-03-31 오후 12:58:58 Francés Canadiense Puede bloquear los programas de TV según la clasificación Francés Canadiense. • G: General • 8 ans+: Programación generalmente considerada aceptable para niños mayores de 8 años sin acompañamiento de adultos. • 13 ans+: Es posible que la programación no sea adecuada para niños menores de 13 años. • 16 ans+: Es posible que la programación no sea adecuada para niños menores de 16 años. • 18 ans+: Programación restringida para adultos. N El V-Chip bloqueará automáticamente cualquier categoría que sea más restrictiva. Por ejemplo, si bloquea la categoría 8 ans+, también se bloquearán automáticamente 13 ans+, 16 ans+ y 18 ans+. Francés Canadiense Perm. todo Bloq. todo n Mover E Ingresar R Regresar Clasificación U.S. Descargable La información de la restricción paterna se puede usar mientras se ven los canales DTV. N Si la información no se descarga desde la emisora, el menú Downloadable U.S. Rating está desactivado. N La información de la restricción de bloqueo se puede descargar automáticamente mientras se ven los canales DTV. Esto puede tardar algunos segundos. N El menú Downloadable U.S. Rating está disponible después de que la información se haya descargado desde la emisora. Sin embargo, según el tipo de información de la emisora, el menú podría no estar disponible para su uso. N Los niveles de restricción paterna difieren según la emisora. N El nombre de menú predeterminado y la Clasificación U.S. Descargable cambian según la información descargada. N Aunque configure la visualización en pantalla en su propio idioma, el menú Clasificación U.S. Descargable siempre lo verá en inglés. N La clasificación bloqueará automáticamente cualquier categoría que sea más restrictiva. N Los títulos de clasificación (por ejemplo, nivel de humor, etc) y las clasificaciones de televisión (por ejemplo, DH, MH, H, etc.) pueden variar de acuerdo con la emisora. Cambiar Código Puede cambiar el código de cuatro dígitos para usar la función V-Chip. N El código PIN predeterminado para un televisor nuevo es ‘0-0-0-0’. N Si cambia el código PIN completamente, se muestra el mensaje Código cambiado correctamente. Cómo reiniciar el televisor cuando el V-Chip bloquea un canal (Escape de emergencia) Si el TV se sintoniza en un canal restringido, V-Chip lo bloqueará. La pantalla quedará en blanco y aparecerá el mensaje siguiente: 1. Escriba su código PIN. Para volver al modo de visualización normal, sintonice un canal diferente con los botones CH < o CH >. En determinadas condiciones (en función de la clasificación de los programas de TV locales), V-Chip puede bloquear todos los canales. En este caso, utilice la función V-Chip como salida de emergencia: N Si olvida el PIN, pulse los botones del mando a distancia en la siguiente secuencia para reiniciar el código a ‘0-0-0-0’: Apagar → MMUTE → 8 → 2 → 4 → Encender. ❑ Subtítulo (mensajes de texto en pantalla) N La función de subtítulos no está disponible en los modos Componente, HDMI o PC. N La disponibilidad de los subtítulos depende del programa que se esté emitiendo. O Pulse el botón CC del mando a distancia para seleccionar Subtítulo (Encendido) o Subtítulo (Apagado). Configuración de red V-Chip Digital Subtítulo La función de subtítulos digitales funciona en canales digitales. Melodía : Medio • Modo de Subtítulo: Programado, Servicio1~Servicio6, CC1~CC4, Texto1~Texto4 Ahorro energía : Apagado • Opciones - Subtítulos Dig. PIP - Tamaño: Se puede seleccionar el tamaño de la fuente del subtítulo. - Estilo fuente: Se puede seleccionar la fuente del subtítulo. - Color de primer plano: Se puede seleccionar el color de los subtítulos. - Color de fondo: Se puede seleccionar el color del fondo de los subtítulos. - Opacidad de primer plano: Se puede cambiar la opacidad del primer plano de los subtítulos. - Opacidad de fondo: Se puede seleccionar la opacidad del fondo de los subtítulos. - Regresar al Predeterminado: Restaura la configuración predeterminada de la estación emisora de los subtítulos. Configuración ► N Opciones - Subtítulos Dig. sólo están disponibles cuando Programado y Servicio1~Servicio6 se han seleccionado en el Modo N N N N de Subtítulo. Servicio1~6 en el modo de subtítulos digital pueden no estar disponibles según el tipo de emisión. Programado significa que se sigue el estándar establecido por el emisor. Las opciones de color de primer plano y color de fondo no se pueden ajustar con el mismo color. Opacidad de primer plano y Opacidad de fondo no se pueden establecer a la vez como transparentes. Analógico La función de subtítulos analógicos funciona tanto en el modo de canal de televisión analógica como cuando la señal proviene de un dispositivo externo. • Modo de Subtítulo : Programado, CC1~CC4, Texto1~Texto4 N La función de subtítulos no está disponible en los modos Componente, PC o HDMI. Español - 32 BN68-02269A_SPA.indd 32 2009-03-31 오후 12:58:58 ❑ Melodía V-Chip Subtítulo Configuración La melodía del encendido y del apagado del televisor se puede configurar. • Apagado: Apaga la función de la melodía. • Bajo: Establece el volumen de la melodía en un nivel bajo. • Medio: Establece el volumen de la melodía en un nivel medio. • Alto: Establece el volumen de la melodía en un nivel alto. N La melodía no se reproduce. Melodía : Medio Ahorro energía : Apagado ► PIP - Cuando no hay salida de sonido desde el televisor porque se ha activado el botón MMUTE. - Cuando no hay salida de sonido desde el televisor porque se ha reducido al mínimo con el botón VOL . - Cuando la función de temporizador ha apagado el televisor. Fabricado bajo licencia de Dolby Laboratories. Dolby y el símbolo de la doble D son marcas comerciales de Dolby Laboratories. ❑ Ahorro energía Esta función ajusta el brillo del televisor, lo cual reduce el consumo de energía. Si desea ver la televisión por la noche, ajuste la opción del modo Ahorro energía en Alto; sus ojos se lo agradecerán y, además, reducirá el consumo de energía. • Apagado: Desactiva la función de ahorro de energía. • Bajo: Establece la función de ahorro de energía en sus valores bajos. • Medio: Establece la función de ahorro de energía en sus valores medios. • Alto: Establece la función de ahorro de energía en sus valores máximos. Visualización PIP (Imagen en imagen) N Cuando V-Chip o Internet@TV están funcionando, no se puede utilizar la función PIP. N Si mientras ve la televisión en el modo PIP, apaga el televisor y vuelve a encenderlo, Configuración Puede usar la función PIP para ver simultáneamente la televisión y una fuente de vídeo externa. Este producto lleva un sintonizador incorporado que no permite la función PIP en el mismo modo. Melodía : Medio Ahorro energía : Apagado PIP ► la ventana PIP desaparecerá. N Puede notar que la imagen de la ventana PIP llega a ser ligeramente artificial cuando utiliza la pantalla principal para visualizar juegos o karaoke. T Pulse el botón TOOLS para ver el menú Herramientas. También puede establecer la configuración PIP relacionada seleccionando Herramientas → PIP. PIP ❑ PIP → Apagado / Encendido Puede activar o desactivar la función PIP. Imagen principal Imagen secundaria Componente HDMI1, HDMI2/DVI, HDMI3, HDMI4 TV PIP : Apagado Tamaño : Posición : Aire/Cable : Aire Canal : Aire 27 E Ingresar PC Tamaño → / / / Puede seleccionar el tamaño de la imagen secundaria. N Si la imagen principal está en modo HDMI, la opción Tamaño está disponible. Posición → / / / Puede seleccionar la posición de la imagen secundaria. N En el modo doble ( , ) Posición no se puede seleccionar. Aire / Cable Puede seleccionar un origen para una imagen secundaria. Canal Puede seleccionar un canal de la imagen secundaria. ► R Regresar Español - 33 BN68-02269A_SPA.indd 33 2009-03-31 오후 12:58:58 Configuración de la hora ❑ Reloj Configuración El ajuste del reloj es necesario para utilizar las distintas funciones de temporización del televisor. N La hora actual aparecerá siempre que se pulse el botón INFO. N Si desconecta el cable de alimentación, debe configurar el reloj de nuevo. Plug & Play Idioma Modo Reloj Puede configurar la hora actual en forma manual o automática. • Auto: Configure la hora automáticamente mediante la información de la hora de la emisión digital. • Manual: Configure la hora actual manualmente. Config. Reloj Puede ajustar la hora actual manualmente. N Esta función sólo está disponible si Modo Reloj está configurado como Manual. N Puede ajustar Mes, Día, Año, Hora o Minuto directamente pulsando los botones numéricos del mando a distancia. Zona Tiempo Puede seleccionar su zona horaria. N La antena o el cable deben estar conectados para ajustar la hora automáticamente. ► Modo Juego : Apagado BD Wise : Encendido Tipo de red : Cable Configuración de red V-Chip Subtítulo Melodía : Medio Tiempo Modo Reloj : Auto ► Config. Reloj Zona Tiempo DST : Apagado U Mover E Ingresar R Regresar DST (horario de verano) �� →� Apagado/Encendido/Auto Puede activar o desactivar la función de horario de verano. N Las funciones Zona Tiempo y Horario de Verano sólo están disponibles cuando Modo Reloj está establecido en Auto. N Según la emisora y la señal, la hora automática no se puede ajustar correctamente. En tal caso, debe hacerlo manualmente. ❑ Temporizador : Español Tiempo Tiempo El temporizador de desconexión apaga automáticamente el televisor después de un período prefijado (30, 60, 90, 120, 150 y 180 minutos). Reloj : 1:27 am Apagado / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min. N Para cancelar la función Temporizador seleccione Apagado. Temporizador : Apagado Temporizador 1 : Desactivado Temporizador 2 : Desactivado Temporizador 3 : Desactivado T Pulse el botón TOOLS para ver el menú Herramientas. También puede configurar el temporizador seleccionando Herramientas → Temporizador. ❑ Temporizador 1/Temporizador 2/Temporizador 3 U Mover ► E Ingresar R Regresar Tiempo 1 Utilice esta función para que el televisor se encienda o apague a una hora concreta. Se Hora de encendido am 12 00 Inactivo pueden activar/desactivar 3 Hora de apagado horas distintas. Debe ajustar el reloj en primer lugar. am Inactivo 12 00 • Hora de encendido: Ajuste la hora, los minutos, am/pm y activar/inactivo. Volumen Origen Antena Canal (Para activar el temporizador con la configuración elegida, establézcalo en Activar.) 9 TV Cable 3 • Hora de apagado: Ajuste la hora, los minutos, am/pm y activar/inactivo. Repetir Dom Lun Mar Mie Jue Vie Sáb (Para activar el temporizador con la configuración elegida, establézcalo en Activar.) Una vez • Volumen: Configure el nivel de volumen deseado. lr Mover U Ajustar E Ingresar R Regresar • Origen: Puede seleccionar el contenido del TV, Memoria en TV o del dispositivo USB que se reproducirá cuando el televisor se encienda automáticamente. Seleccione TV, Memoria en TV o USB. (Compruebe que haya un dispositivo USB conectado al televisor.) N Si selecciona TV, puede configurar Antena y Canal. - Antena: Selecciona Aire o de cable. - Canal: Selecciona el canal deseado. N Si selecciona Memoria TV o USB, podrá configurar Contenido. - Contenido: Selecciona el contenido deseado de Memoria TV o USB. N El nombre de la carpeta admite sólo 64 caracteres en inglés. N Si el nombre de la carpeta es demasiado largo, ésta no se seleccionará. N Cuando se activa el encendido automático y se conectan simultáneamente 2 dispositivos USB que tienen el mismo nombre de fabricante y carpeta, es posible que se lea el dispositivo USB incorrecto. Si usa dos dispositivos USB del mismo tipo, asegúrese de que los nombres de la carpeta sean diferentes para que se pueda leer el USB correcto. N Si sólo hay un archivo de foto en el USB o la Memoria TV, la presentación no se reproducirá • Repetir: Seleccione Una vez , Cada día, Lun~Vie, Lun~Sáb, Sáb~Dom o Manual. N Con Manual seleccionado, pulse el botón ► para seleccionar el día de la semana. Pulse el botón ENTERE sobre el día deseado y aparecerá la marca c. N Puede ajustar la hora, los minutos y el canal pulsando los botones numéricos del mando a distancia. N Apagado automático Si activa el temporizador, el televisor se apagará si no se pulsa ningún botón durante 3 horas, después de que el temporizador lo haya puesto en marcha. Esta función sólo está disponible con el temporizador activado y evita el recalentamiento que se puede producir si el televisor está encendido durante demasiado tiempo. Español - 34 BN68-02269A_SPA.indd 34 Continúa... 2009-03-31 오후 12:58:59 Lista de Entradas/Editar Nombre ❑ Lista de Entradas Lista de Entradas Editar Nombre TV, AV1, AV2, Componente1, Componente2, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB. N Sólo se puede elegir los dispositivos externos que estén conectados al televisor. En Lista de Entradas, las entradas conectadas se resaltan y se ordenan en la parte superior. Las entradas que no están conectadas se ordenan en la parte inferior. N Si hay dispositivos USB conectados a los terminales USB1(HDD) y USB2, aparecen como USB1 y USB2 en orden. N Uso de los botones de colores del mando a distancia con la lista de entradas - Rojo (actualizar): Actualiza los dispositivos externos conectados. Púlselo si la entrada está activada y conectada pero no se muestra en la lista. - T TOOLS (Herramientas): Muestra los menús Editar Nombre e Información. O Pulse el botón SOURCE del mando a distancia para ver una fuente de señal externa. Editar Nombre AV1 ---- AV2 ❑ Editar Nombre Puede dar un nombre al dispositivo conectado en los terminales de entrada; de esta manera será más fácil seleccionar el dispositivo de entrada. Entrada Se utiliza para seleccionar TV u otras fuentes de entrada externas como reproductores DVD/Blu-ray/receptores por cable/ satélite (decodificadores) conectados al televisor. Permite seleccionar la fuente de entrada que se prefiera. Vídeo / DVD / Cable STB / Satélite STB / PVR STB / Receptor AV / Juego / Filmadora / PC / DVI / DVI PC / TV / IPTV / Blu-ray / HD DVD / DMA N Cuando se conecta un ordenador con una resolución de 1920 x 1080 a 60 Hz al puerto HDMI IN 2(DVI), se debe configurar el modo HDMI2/DVI en PC del menú Editar Nombre. Vídeo Componente1 DVD Componente2 Cable STB PC Satélite STB HDMI1 PVR STB HDMI2/DVI ▼ U Mover E Ingresar R Regresar Español - 35 BN68-02269A_SPA.indd 35 2009-03-31 오후 12:58:59 Soporte técnico ❑ Aviso legal ❑ Guía del producto Soporte técnico Puede ver el aviso legal y el descargo de responsabilidad general referentes al contenido y los servicios de terceros. N El Descargo de responsabilidad general puede variar en función del país. N Puede desplazarse a la página anterior o siguiente con los botones ◄ o ►. La guía del producto proporciona información sobre las características más importantes del televisor. The descriptions provided by this function are in English and Candian French only. N Si desea más información, consulte el elemento deseado. • Calidad de la imagen: 1080 Full HD Motion, Ultra FilterBright, Cinema Smooth, Modo Imagen • [email protected]: Internet@TV-Content Service, Content Library Flash, USB2.0 Movie, DLNA Wireless • Ecológico: Energy Saving, material ecológico Aviso legal ► Guía del producto Autodiagnóstico Actualización del software Guía de conexión HD Contacto con Samsung ❑ Autodiagnóstico Prueba de imagen Si cree que tiene un problema con la imagen, efectúe la prueba de imagen. Compruebe el patrón del color en la pantalla para ver si persiste el problema. N ¿Continúa el problema con esta prueba? se muestra en la pantalla. Si el patrón de prueba no aparece o si en él se produce ruido, seleccione Sí. Si el patrón de prueba se muestra correctamente, seleccione No. • Sí: Puede haber un problema en el televisor. Póngase en contacto con el Centro de llamadas de Samsung. • No: Puede haber un problema en el equipo externo. Compruebe las conexiones. Si persiste el problema, consulte el manual del usuario del dispositivo externo. Prueba de sonido Si cree que tiene un problema con el sonido, efectúe la prueba de sonido. Compruebe el sonido reproduciendo una melodía en el televisor. N ¿Continúa el problema con esta prueba? se muestra en la pantalla. Si durante la prueba de sonido sólo se oye sonido de un altavoz o no se oye de ninguno, seleccione Sí. Si oye sonido de los altavoces, seleccione No. • Sí: Puede haber un problema en el televisor. Póngase en contacto con el Centro de llamadas de Samsung. • No: Puede haber un problema en el equipo externo. Compruebe las conexiones. Si persiste el problema, consulte el manual del usuario del dispositivo externo. N Si no oye sonido en los altavoces del televisor, antes de realizar la prueba de sonido, asegúrese de que Seleccionar altavoz esté configurado como Altavoz de TV en el menú de sonido. N La melodía se oirá durante la prueba aunque Seleccionar altavoz esté establecido como Altavoz externo o se haya silenciado el sonido con el botón MMUTE. Intensidad señal (Sólo canales digitales) Puede ajustar la antena para mejorar la recepción de los canales digitales disponibles. N Si el medidor de la intensidad de la señal indica que ésta es débil, mueva la antena para aumentar la intensidad de la señal. Siga ajustando la antena hasta que encuentre la mejor posición para recibir la señal más fuerte. Español - 36 BN68-02269A_SPA.indd 36 2009-03-31 오후 12:58:59 ❑ Actualización del software Guía del producto Soporte técnico Autodiagnóstico Samsung puede ofrecer actualizaciones del firmware del televisor en el futuro. Consulte Samsung.com o póngase en contacto con el centro de llamadas de Samsung en Actualización del software 1-800-SAMSUNG (726-7864) para recibir información acerca de la descarga de las Guía de conexión HD actualizaciones y del uso de un controlador USB. Las actualizaciones se pueden realizar Contacto con Samsung conectando una unidad USB al puerto USB. N Cuando se actualiza el software, la configuración del vídeo y audio que se haya efectuado vuelve a la configuración predeterminada (de fábrica). N Es aconsejable anotar la configuración para que después sea más fácil restaurarla tras la actualización en el modo de suspensión. N Después de realizar la actualización compruebe la versión del firmware. La nueva versión tendrá un número superior a la anterior. N No desconecte la alimentación ni retire la unidad USB mientras se aplican las actualizaciones. El televisor se apagará y se encenderá automáticamente después de completar la actualización del firmware. Por USB Inserte una unidad USB que contenga la actualización del firmware en el televisor. No desconecte la alimentación ni extraiga la unidad USB mientras se aplican las actualizaciones. El televisor se apagará y se encenderá automáticamente después de completar la actualización del firmware. ► Panel lateral del TV En línea Unidad USB Actualiza el software a través de Internet. N Primero, configure la red. Para conocer el procedimiento detallado sobre cómo configurar la red, consulte las instrucciones de ‘Configuración de la red’. N Si la conexión a Internet no funciona adecuadamente, se puede interrumpir; vuelva a intentar la descarga. Si el problema persiste, haga la descarga mediante USB y lleve a cabo la actualización. Software alternativo (Copia de seguridad) Si hay problemas con el nuevo firmware que afecten al funcionamiento, puede cambiar el software a la versión anterior. N Si se ha cambiado el software, se muestra el software existente. N Puede cambiar el software actual a uno alternativo mediante Software alternativo. ❑ Guía de conexión HD Self Diagnosis Actualización del software Soporte técnico Se muestran unas breves instrucciones en Cómo obtener el mejor rendimiento del nuevo HDTV. Se proporciona el método de conexión de los dispositivos de alta definición. N Puede desplazarse a la página anterior o siguiente con los botones ◄ o ►. Guía de conexión HD ► Contacto con Samsung ❑ Contacto con Samsung Revise esta información cuando el televisor no funcione correctamente o cuando desee actualizar el software. Puede ver la información relacionada con el centro de llamadas, el producto y el método de descarga del archivo de software. Español - 37 BN68-02269A_SPA.indd 37 2009-03-31 오후 12:58:59 Media Play Conexión de un dispositivo USB 1. Pulse el botón POWER para encender el televisor. 2. Conecte un dispositivo USB que contenga archivos de fotos, música o películas al terminal Panel lateral del TV USB que se encuentra en el lateral del televisor. N El terminal USB 1(HDD) también se usa como terminal HDD. HDD (unidad de disco duro) es un dispositivo que almacena datos codificados digitalmente. N Media Play sólo admite dispositivos USB de clase de almacenamiento masivo (MSC). MSC es un dispositivo de clase de almacenamiento masivo sólo de transporte de gran capacidad. Ejemplos de MSC son unidades de almacenamiento en miniatura y lectores de Unidad USB tarjetas Flash (no se admite ni disco duro de USB ni de HUB). N MTP (Protocolo de transferencia de recursos) no se admite. N El sistema de archivos sólo admite FAT16/32 (el sistema de archivos NTFS no se admite). N Ciertos tipos de cámara digital USB y dispositivos de audio quizás no sean compatibles con este televisor. N Conecte directamente con el terminal USB del televisor. Si utiliza una conexión con un cable independiente, puede haber problemas de compatibilidad con el USB. N Antes de conectar el dispositivo al televisor, haga una copia de seguridad de sus archivos para evitar daños o pérdidas de datos. SAMSUNG no se hace responsable por cualquier daño en los archivos o pérdida de datos. N No desconecte el dispositivo USB mientras se esté cargando. N MSC admite archivos MP3 y JPEG, mientras que un dispositivo PTP sólo admite archivos JPEG. N Se admite el formato JPEG secuencial, JPEG progresivo. (No se admite el sistema de formato JPEG2000, JPEG XR). N Los archivos de fotos y de audio deben llevar un nombre en inglés, francés o español. De lo contrario, los archivos no se pueden reproducir. Si es necesario, póngales un nombre inglés, francés o español. N Cuanto mayor sea la resolución de la imagen, más tiempo tardará en visualizarse en la pantalla. N La resolución JPEG máxima admitida es 15360 x 8640 píxeles. N Con archivos dañados o que no se admiten, se muestra el mensaje Formato de archivo no admitido. N Si la clave de clasificación se establece en Vista básica, se pueden mostrar hasta 1.000 archivos en cada carpeta. La otra clave de clasificación puede mostrar hasta 10.000 archivos. N Los archivos MP3 con DRM descargados desde un sitio de pago no se pueden reproducir. N DRM (Gestión de derechos digitales) impide los usos ilegales de recursos digitales para proteger el copyright. N Cuando se desplaza a una foto, la carga puede tardar varios segundos. ❑ Uso de los botones del mando a distancia en el menú Media Play Botón Función ▲/▼/◄/► Mover el cursor y seleccionar una opción. ENTERE Seleccionar la opción marcada. Reproducir o hacer una pausa mientras se está reproduciendo una presentación de diapositivas, una película o un archivo de música. Reproducir o hacer una pausa en la presentación, la película o el archivo de música. RETURN TOOLS Volver al menú anterior. Ejecutar diversas funciones desde los menús de fotos, música y película. Detener la presentación, la película o el archivo de música. Saltar al grupo anterior/Saltar al grupo siguiente. INFO MEDIA.P Exit Mostrar información del archivo. Acceder al o salir del modo Media Play. Salir del modo Media Play. Español - 38 BN68-02269A_SPA.indd 38 Continúa… 2009-03-31 오후 12:58:59 Uso de la función para la reproducción multimedia Permite ver y reproducir archivos de fotos, música o películas guardados en un dispositivo de clase de almacenamiento masivo USB (MSC). ❑ Uso del menú Media Play 1. Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Aplicaciones y, a continuación, pulse el botón ENTERE. 2. Pulse los botones ▲ o ▼ para seleccionar Media Play (USB & DLNA) y, a continuación, pulse el botón ENTERE. O Pulse el botón SOURCE del mando a distancia para seleccionar USB o DLNA y, a continuación, pulse el botón ENTERE. O Pulse el botón MEDIA.P del mando a distancia para que se muestre el menú Media Play. 3. Pulse el botón rojo y, a continuación, los botones ▲ o ▼ para seleccionar el correspondiente dispositivo de memoria USB (si está conectado a un concentrador). Pulse el botón ENTERE. N Esta función puede variar según el dispositivo de memoria USB/DLNA conectado al televisor. N El nombre del dispositivo USB seleccionado aparece en la parte inferior izquierda de la pantalla. Media Play 148.48MB/149.00MB USB : USB PHOTO Photo USB Music Movie Setup Dispositivo R Regresar 4. Pulse los botones ◄ o ► para seleccionar un icono (Photo, Music, Movie, Setup) y, a continuación, pulse el botón ENTERE. N Para salir del modo Media Play pulse el botón MEDIA.P del mando a distancia. N Se puede disfrutar de películas de juegos. (no admite programa de juegos). 1 Fecha ▶ 2 2009 Mar ▶ Preferencias Vista básica ▶ 3 Color 4/6 Secuencia Copiar Repr. grupo actual Copiar grupo actual Carpeta 1 Información Carpeta 2 IMG_0349. JPG IMG_0335.JPG Retirar con seg ../ Nombre carpeta/ Dispositivo Seleccionar T Herramientas R Carpeta superior 1/67 ▶ Dispositivo Color ◀ USB Fecha 1 1 Nov IMG_03496 IMG_03496 .JPG 5 Vista básica Carpeta Apr Jun Mar.01.2009 c .JPG Carpeta Preferencias USB ❑ Pantalla de visualización Photo Photo ▶ Puede quitar el dispositivo del televisor con seguridad. 1. Pulse el botón TOOLS en la pantalla de la lista de archivos de reproducción multimedia, o mientras se está reproduciendo una presentación o un archivo de música o de película. 2. Pulse los botones ▲ o ▼ para seleccionar Retirar con seg y, a continuación, pulse el botón ENTERE. 3. Retire el dispositivo USB del televisor. ▶ ❑ Extracción segura del dispositivo de memoria USB IMG_0335.JPG 6 Conf fav IMG_0343 .JPG 4 IMG_03496 .JPG 1Archivos selecc. Selección T Herramientas R Regresar 1. 2. 3. 4. 5. Norma de clasificación actual: Este campo muestra la norma actual de la clasificación de archivos. Ver grupos: El grupo de clasificación que incluye la foto seleccionada se resalta. Archivo seleccionado actualmente: Se resalta el archivo seleccionado actualmente. Dispositivo actual: Muestra el nombre del dispositivo actualmente seleccionado. Información de selección del elemento: Muestra el número de fotos seleccionadas cuando se pulsa el botón amarillo. N Botón rojo (Dispositivo) : Selecciona un dispositivo conectado. 6. Elementos de ayuda • Botón verde (conf. fav) : Cambia la configuración de favorito del archivo seleccionado. Pulse este botón varias veces hasta que se muestre el valor que desee. • Botón amarillo (Selección) : Selecciona un archivo en la lista de archivos. Los archivos seleccionados se marcan con un símbolo c. Vuelva a pulsar el botón amarillo para cancelar la selección del archivo. • Botón TOOLS (Herramientas) : Muestra los menús de opciones. (El menú Herramientas cambia de acuerdo con el estado actual.) • Botón R RETURN (Regresar) : Volver al menú anterior. Español - 39 BN68-02269A_SPA.indd 39 2009-03-31 오후 12:59:03 Uso y clasificación de la lista de fotos Se pueden clasificar las fotos de la Lista de fotos según una norma particular. Photo Preferencias Vista básica Fecha 2009 Mar ▶ Color ▶ Apr Carpeta Nov Jun ▶ Mar.01.2009 1/67 ◀ ▶ 1. Pulse el botón MEDIA.P del mando a distancia para que se muestre el menú Media Play. 2. Pulse los botones �������������������������������������������������������������� ◄ o ►��������������������������������������������������������� para seleccionar Foto y, a continuación, pulse el botón ENTERE. 3. Pulse dos veces el botón ▲ y, a continuación, pulse los botones ◄ o ► para seleccionar una norma de clasificación. (Vista básica, Fecha, Color, Carpeta, Preferencias) N La fotos se clasifican según la nueva norma de clasificación seleccionada. N Para ir al grupo anterior/siguiente, pulse los botones (REW) o (FF). IMG_03496 IMG_03496 .JPG .JPG USB Dispositivo Conf fav IMG_03496 .JPG IMG_0343 .JPG IMG_0335.JPG Selección R Regresar T Herramientas 4. Pulse dos veces el botón ▼ y, a continuación, pulse el botón (Reproducir)/ENTERE para iniciar la presentación en el orden elegido. N La información del archivo de foto se configura automáticamente. N La información del color extraída del archivo de foto puede diferir de la que espera el usuario. N Se pueden cambiar el color y las preferencias. N Las fotos cuya información no se puede mostrar se establecen como Sin clasificar. N PTP no admite el modo de clasificación de la carpeta. ❑ Norma de clasificación en la lista de fotos Vista básica Muestra las carpetas del dispositivo de memoria USB. Si selecciona una carpeta y pulsa el botón ENTERE, sólo se muestran los archivos de fotos incluidos en la carpeta seleccionada. N Cuando se clasifican según la Vista básica, no se pueden configurar los archivos favoritos Fecha Ordena y muestra las fotos por fechas. Ordena por años y meses empezando por las más antiguas. Color Ordena las fotos por color. Se puede cambiar la información del color de la foto. N Para usar esta función, establezca Usar vista color en los menús de Configuración como Encendido. N Opciones de color: Rojo, Amarillo, Verde, Azul, Magenta, Negro, Gris, Sin clasificar. Carpeta Ordena las fotos por carpeta. El archivo de fotos de la carpeta raíz se muestra primero y los otros se muestran ordenados alfabéticamente por nombre. Preferencias Ordena las fotos por preferencias (favoritos). Se puede cambiar las preferencias de la foto. N Cambio de la configuración de favoritos. Seleccione una foto en la lista de fotos y pulse varias veces el botón verde hasta que aparezca la opción deseada. N Opciones de favoritos: ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★ N Las estrellas indican sólo una agrupación. Por ejemplo, la configuración de 3 estrellas no tiene prioridad sobre la de 1 estrella. ❑ Menús de herramientas de la lista de fotos Photo Vista básica Fecha Color ▶ Secuencia Puede reproducir una presentación de archivos de fotos del dispositivo de memoria USB. ▶ Carpeta Preferencias 1 1 4/6 Secuencia Copiar / Copiar grupo actual / Copiar archivo selecc. (Si hay varios archivos seleccionados) Seleccione la foto que desee copiar. (Otra opción es seleccionar varios archivos con IMG_0335.JPG el botón amarillo.) Pulse el botón TOOLS para seleccionar Copiar (o Copiar grupo actual / Copiar archivo selecc). Los archivos del dispositivo USB se guardan en la Dispositivo USB Conf fav Selección memoria del TV. N Sólo puede copiar archivos guardados en el dispositivo USB. N Cuando la memoria del televisor está llena, los archivos no se pueden copiar. Repr. grupo actual Puede reproducir una presentación solamente de los archivos de fotos del grupo de clasificación actualmente seleccionado. Copiar Repr. grupo actual Cambiar info grupo Folder 1 Copiar grupo actual Folder 2 IMG_0349 .JPG Información ▼ T Herramientas R Regresar Español - 40 BN68-02269A_SPA.indd 40 2009-03-31 오후 12:59:06 Cambiar info grupo (Si la tecla de clasificación es Color) Se puede cambiar la información de color de un archivo (o grupo de archivos) de una foto seleccionada para mover ésta de un grupo de color a otro. N Esto no cambia el color real de la foto. N La información del grupo del archivo actual se ha actualizado y el archivo se ha movido al nuevo grupo. N Para cambiar la información de varios archivos, seleccione los que desee cambiar con el botón amarillo. Deselecc. todos (Si hay, al menos, un archivo seleccionado) Puede cancelar la selección de todos los archivos. N La marca c indica que el archivo correspondiente seleccionado está oculto. Información Se muestra la información del archivo de foto: nombre, tamaño, resolución, fecha de modificación y ruta. O De manera alternativa, puede seleccionar una foto de la lista y pulsar el botón INFO para ver la información. Retirar con seg Puede quitar el dispositivo del televisor con seguridad. Visualización de una foto o una presentación ❑ Visualización de una presentación 1. Pulse el botón MEDIA.P del mando a distancia para que se muestre el menú Media Play. 2. Pulse los botones ◄ o ► para seleccionar Foto y, a continuación, pulse el botón ENTERE. 3. Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. 4. Pulse el botón TOOLS. 5. Pulse los botones ▲ o ▼ para seleccionar Secuencia y, a continuación, pulse el botón ENTERE. N En la presentación se usan todos los archivos de la lista de fotos. r Normal IMG_0335.JPG USB E Pausa 3648x2432 2009/3/15 lr ant./Sig. T Herramientas 1/4 R Regresar N Durante la presentación, los archivos se muestran en orden a partir del archivo que se muestra en este momento. N La presentación se ejecuta según el orden de la clasificación de la lista de fotos. N Los archivos de música se pueden reproducir automáticamente durante la presentación si Música de fondo está configurado como Encendido. (reproducir) / ENTERE del mando a distancia para iniciar la presentación. O Mientras se muestra una lista de fotos, pulse el botón N Botones de control de la presentación ENTERE Reproducir/hacer una pausa en la presentación. Reproducir la presentación. T TOOLS Hacer una pausa en la presentación. / Salir de la presentación y volver a la lista de fotos. Ejecutar diversas funciones desde los menús de fotos. Cambiar la velocidad de reproducción de la presentación. ❑ Reproducción del grupo actual 1. 2. 3. 4. Pulse los botones ◄ o ► para seleccionar una norma de clasificación. (Vista básica, Fecha, Color, Carpeta, Preferencias) Pulse los botones (REW) o (FF) para seleccionar el grupo deseado. Pulse dos veces el botón ▼ y, a continuación, pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar Repr. grupo actual y, a continuación, pulse el botón ENTERE. ❑ Reproducción de los archivos de música seleccionados 1. Pulse los botones ◄ o ► para seleccionar la foto que desee de la lista. 2 . Pulse el botón amarillo. Repita el proceso anterior para seleccionar varias fotos. N La marca c aparece a la izquierda de la foto seleccionada. N Para cancelar la selección de todos los archivos, pulse el botón TOOLS y seleccione Deselecc. todos. 3. Pulse el botón (reproducir) / ENTERE. N Los archivos seleccionados se usan en la presentación. Español - 41 BN68-02269A_SPA.indd 41 2009-03-31 오후 12:59:07 ❑ Menú de herramientas de la presentación de diapositivas Detener visionado automático / Inic. vis. aut. Puede iniciar o detener una presentación. Herramientas Velocidad visionado automático → Normal /Rápido / Lento Sólo durante la presentación se puede seleccionar la velocidad de ésta. N Durante la presentación, también se puede cambiar la velocidad de ésta con los botones (REW) o (FF). Efecto secuencia Puede establecer diferentes efectos en la presentación. • Fundido 1, Fundido 2, Persiana, Espiral, Tablero, Lineal, Escaleras, Cortinilla, Al azar, Ninguno. Girar → 0˚ / 90˚ / 180˚ / 270˚ Puede girar las fotos guardadas en el dispositivo de memoria USB. N Con cada pulsación del botón ��������������������������������������� ◄�������������������������������������� , la imagen gira 270˚, 180˚, 90˚ y 0˚. N Con cada pulsación del botón ��������������������������������������� ►�������������������������������������� , la imagen gira 90˚, 180˚, 270˚ y 0˚. N El archivo girado no se guarda. Zoom �������������� →������������� x1 ������������ / x2 / x4 Detener visionado automático Tools : Normal Velocidad visionado automático Efecto secuencia : Fundido 1 Girar Zoom Música de fondo Configuración de la imagen Configuración del sonido Información U Mover E Ingresar e Salir Puede ampliar las fotos guardadas en el dispositivo de memoria USB. N Pulse los botones ����������������������������������������������������� ◄���������������������������������������������������� o ►������������������������������������������������ ������������������������������������������������� varias veces para aumentar o reducir el efecto Zoom. ����� N Para mover una foto ampliada, pulse el botón ENTERE y a continuación los botones ▲/▼/◄/►. Tenga en cuenta que si una imagen ampliada es menor que el tamaño de la pantalla original, la función de cambio de ubicación no está operativa. N El archivo ampliado no se guarda. Música de fondo Puede configurar y seleccionar la música de fondo durante una presentación. N Para usar esta función debe haber archivos de música en el dispositivo USB. N Es necesario cargar los archivos de música para cambiar el modo BGM. Reproduzca los archivos de música en la categoría de música para cargar. • Música de fondo → Apagado / Encendido • Modo BGM → Ánimo / Arch. Sel./ Mezcla • Estado anímico BGM → Dinámico / Rítmico / Triste / Excitante / Tranquilo N Si se establece Modo BGM como Ánimo, puede seleccionar un Estado anímico BGM. • Seleccionar archivo de música N Si se configura Modo BGM como Arch. Sel., se puede seleccionar un archivo de música. Configuración de la imagen / Configuración del sonido Consulte la página 48. Información Se muestra la información del archivo de foto. Retirar con seg Puede quitar el dispositivo del televisor con seguridad. Español - 42 BN68-02269A_SPA.indd 42 2009-03-31 오후 12:59:07 Uso y clasificación de la lista de música ▶ ▶ ▶ Se pueden clasificar los archivos de música de la lista según una norma particular. 1. Pulse el botón MEDIA.P del mando a distancia para que se muestre el menú Media Music Carpeta Preferencias Vista básica Artista Título Play. 2. Pulse los botones ◄ o ► para seleccionar Música y, a continuación, pulse el botón ENTERE. 3. Pulse dos veces el botón ▲ y, a continuación, pulse los botones ◄ o ► para seleccionar una norma de clasificación. (Vista básica, Título, Artista, Ánimo, Género, Carpeta, Preferencias) When I Dream N Los archivos de música se clasifican según la nueva norma de clasificación Selección T Herramientas R Carpeta superior USB Dispositivo seleccionada. N Para ir al grupo anterior/siguiente, pulse los botones (REW) o (FF). 4. Pulse dos veces el botón ▼ y, a continuación, pulse el botón ENTERE para empezar a reproducir música en el orden elegido por el usuario. N La información del archivo de música se configura automáticamente. N La información de Ánimo extraída de un archivo de música puede diferir de la que espera el usuario. N Se pueden cambiar Ánimo y Preferencias. N Los archivos de música cuya información no se puede mostrar se establecen como Sin clasificar. N Si no hay información del título de un archivo de música, se muestra el nombre del archivo. 1 1 3/4 Carol kidd Mr A-Z ▶ ▶ 2009 Pop NPKI Heaven manual del usuario ../ Nombre carpeta/ ❑ Norma de clasificación en la lista de música • Vista básica:������������������������������������������������� Muestra ������������������������������������������������ las carpetas del dispositivo de memoria USB. Si selecciona una carpeta y pulsa el botón ENTERE, sólo se muestran los archivos de películas incluidos en la carpeta seleccionada. N Cuando se clasifican según la Vista básica, no se pueden configurar los archivos favoritos. • Título: Ordena los títulos de música en orden alfabético y muestra el archivo de música. • Artista: Ordena los archivos de música por artista y en orden alfabético. • Ánimo: Ordena los archivos de música por el tipo de estado de ánimo. Se puede cambiar la información del estado de ánimo de la música. N Opciones de Ánimo : Dinámico, Rítmico, Triste, Excitante, Tranquilo, Sin clasificar. • Género: Ordena los archivos de música por el género. • Carpeta: Ordena los archivos de música por carpetas. El archivo de música en la carpeta raíz se muestra primero y los otros se muestran ordenados alfabéticamente por nombre. • Preferencias: Ordena los archivos de música por preferencias (favoritos). Se puede cambiar las preferencias de los archivos de música. N Cambio de la configuración de favoritos Seleccione un archivo de música en la lista y pulse varias veces el botón verde hasta aparezca la opción deseada. N Opciones de favoritos : ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★ N Las estrellas indican sólo una agrupación. Por ejemplo, la configuración de 3 estrellas no tiene prioridad sobre la de 1 estrella. ❑ Menú de herramientas de la lista de música Copiar / Copiar grupo actual / Copiar archivo selecc. (Si hay varios archivos seleccionados) Seleccione la música que desee copiar. (Otra opción es seleccionar varios archivos con el botón amarillo.) Pulse el botón TOOLS para seleccionar Copiar (o Copiar grupo actual / Copiar archivo selecc.). Los archivos del dispositivo USB se guardan en la memoria del TV. N Sólo puede copiar archivos guardados en el dispositivo USB. N Cuando la memoria del televisor está llena, los archivos no se pueden copiar. Music Carpeta Preferencias Vista básica ▶ Repr. grupo actual Con este menú sólo se pueden reproducir archivos de música en el grupo de clasificación actualmente seleccionado. ▶ Título 3/4 Repr. grupo actual Carol kidd Copiar Mr A-Z Copiar grupo actual ▶ Información 2009 NPKI Pop NPKI manual del usuario USB Dispositivo Retirar con seg Select Sky Heaven When I Dream ../ Nombre carpeta/ Artist 1 1 T Tools RUpper Folder Selección T Herramientas R Carpeta superior Cambiar info grupo (Seleccione Ánimo como orden estándar de la lista de música.)) Puede cambiar la información de ánimo de los archivos de música. N La información del grupo del archivo actual se ha actualizado y el archivo se ha movido al nuevo grupo. N Para cambiar la información de varios archivos, seleccione los archivos que desee con el botón amarillo. Deselecc. todos (Si hay, al menos, un archivo seleccionado) Puede cancelar la selección de todos los archivos. N La marca c indica que el archivo correspondiente seleccionado está oculto. Información Se muestra la información del archivo de música: nombre, tamaño, fecha de modificación y ruta. O De manera alternativa, puede seleccionar un archivo de música en la lista y pulsar el botón INFO para ver la información. Retirar con seg Puede quitar el dispositivo del televisor con seguridad. Español - 43 BN68-02269A_SPA.indd 43 2009-03-31 오후 12:59:08 Reproducción de un archivo de música ❑ Reproducción de un archivo de música 00:00:02 / 00:04:55 r r Geek In The Pink r 1. Pulse el botón MEDIA.P del mando a distancia para que se muestre el menú Reproducción multimedia. 2. Pulse los botones ◄ o ► para seleccionar Música y, a continuación, pulse el botón ENTERE. 3. Pulse los botones ◄ o ► para seleccionar el archivo de música que desea reproducir. 4. Pulse el botón (reproducir) / ENTERE. 1/3 When I Dream r Heaven N Este menú sólo muestra archivos con la extensión MP3. Los archivos con N N N N N E Pausa lr Ant./Sig. T Herramientas R Regresar otras extensiones no se muestran, aunque se hayan guardado en el mismo USB dispositivo USB. (REW) o (FF) no funcionan durante la reproducción. El archivo seleccionado se visualiza en la parte superior con su tiempo de reproducción. Para ajustar el volumen de la música, pulse el botón del volumen del mando a distancia. Para silenciar el sonido, pulse el botón MMUTE del mando a distancia. Si, al reproducir archivos MP3, el sonido no se oye correctamente, ajuste Ecualizador y SRS TruSurround HD en el menú Sonido. (Un archivo MP3 demasiado modulado puede ocasionar problemas de sonido.) La duración de la reproducción de un archivo de música puede visualizarse como 00:00:00 si la información del tiempo de reproducción no se encuentra al inicio del archivo. N Botones de control de la reproducción de música ENTERE Reproducir/hacer una pausa en el archivo de música. Hacer una pausa en el archivo de música. Reproducir el archivo de música. T TOOLS Ejecutar varias funciones desde los menús de música. N Icono de información de la función de música Cuando todos los archivos de música de la carpeta (o el archivo seleccionado) se repiten. Modo de repetición está configurado como Encendido. Cuando todos los archivos de música de la carpeta (o el archivo seleccionado) se reproducen una vez. Modo de repetición está configurado como Apagado. ❑ Reproducción de un grupo de música 1. 2. 3. 4. Pulse los botones ◄ o ► para seleccionar una norma de clasificación. Pulse los botones (REW) o (FF) para seleccionar el grupo deseado. Pulse dos veces el botón ▼ y, a continuación, pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar Repr. grupo actual y, a continuación, pulse el botón ENTERE. ❑ Reproducción de archivos de música seleccionados 1. Pulse los botones ◄ o ► para seleccionar el archivo de música que desee en la lista. 2. Pulse el botón amarillo. Repita el proceso anterior para seleccionar varios archivos de música. N La marca c aparece a la izquierda del archivo de música seleccionado. N Para cancelar la selección de todos los archivos, pulse el botón TOOLS y seleccione Deselecc. todos. 3. Pulse el botón (reproducir)/ENTERE. N Sólo se reproduce el archivo seleccionado. ❑ Menú de herramientas de la reproducción de música Modo de repetición → Encendido / Apagado Puede reproducir archivos de música repetidamente. Configuración de la imagen / Configuración del sonido Consulte la página 48. Información Se muestra la información del archivo de música. Retirar con seg Herramientas Modo rep. ◄ Encendido ► Configuración de la imagen Configuración del sonido Información Retirar con seg U Mover Ajustar e Salir Puede quitar el dispositivo del televisor con seguridad. Español - 44 BN68-02269A_SPA.indd 44 2009-03-31 오후 12:59:08 Uso y clasificación de la lista de películas Se pueden clasificar las películas de la Lista de películas según una norma particular. Movie 1. Pulse el botón MEDIA.P del mando a distancia para que se muestre el menú Media Preferencias Vista básica Carpeta Tiltle Fecha Play. 2. Pulse los botones ◄ o ► para seleccionar Película y, a continuación, pulse el botón ENTERE. 3. Pulse dos veces el botón ▲ y, a continuación, pulse los botones ◄ o ► para seleccionar una norma de clasificación. (Vista básica, Fecha, Título, Carpeta, MOVIE_001.avi Preferencias) N Los archivos de películas se clasifican según la última norma de clasificación USB Dispositivo Conf fav Selección T Herramientas R Regresar seleccionada. N Para ir al grupo anterior/siguiente, pulse los botones (REW) o (FF). 4. Pulse dos veces el botón ▼ y, a continuación, pulse el botón (reproducir) / ENTERE para reproducir la película en el orden elegido. N La información del archivo de película se configura automáticamente. N Puede cambiar las preferencias. ▶ ▶ Apr ▶ Apr.27.2009 1/5 ◀ ▶ MOVIE_005 .avi MOVIE_000 .avi MOVIE_003 .avi MOVIE_004 .avi ❑ Norma de clasificación en la lista de películas Vista básica Muestra las carpetas del dispositivo de memoria USB. Si selecciona una carpeta y pulsa el botón ENTERE, sólo se muestran los archivos de películas incluidos en la carpeta seleccionada. N Cuando se clasifican según la Vista básica, no se pueden configurar los archivos favoritos. Fecha Ordena y muestra las películas por fechas. Ordena por años y meses empezando por las más antiguas. Título Ordena y muestra los títulos de películas por símbolo / número / orden alfabético /especialidad. Carpeta Si hay varias carpetas en el USB, los archivos de película se muestran ordenados en cada carpeta. El archivo de películas de la carpeta raíz se muestra primero y los otros se muestran ordenados alfabéticamente por nombre. Preferencias Ordena las películas por preferencias (favoritos). Se puede cambiar las preferencias de las películas. N Cambio de la configuración de favoritos Seleccione un archivo de película en la lista y pulse varias veces el botón verde hasta que aparezca la opción deseada. N Opciones de favoritos : ★ ★ ★ , ★ ★ ★ , ★ ★ ★ , ★ ★ ★ N Las estrellas indican sólo una agrupación. Por ejemplo, la configuración de 3 estrellas no tiene prioridad sobre la de 1 estrella. Movie Preferencias Vista básica Fecha Tiltle Carpeta Apr ▶ Repr. grupo actual Con este menú sólo se pueden reproducir archivos de película en el grupo de clasificación actualmente seleccionado. ▶ ❑ Menú de herramientas de la lista de películas Apr.27.2009 1/5 Repr. grupo actual Copiar / Copiar grupo actual / Copiar archivo selecc. (Si hay varios archivos seleccionados) Seleccione la película que desee copiar. (Otra opción es seleccionar varios archivos MOVIE_001.avi con el botón amarillo.) Pulse el botón TOOLS para seleccionar Copiar (o Copiar USB Dispositivo Conf fav Selección T Herramientas R Regresar grupo actual / Copiar archivo selecc.). Los archivos del dispositivo USB se guardan en la memoria del TV. N Sólo puede copiar archivos guardados en el dispositivo USB. N Cuando la memoria del televisor está llena, los archivos no se pueden copiar. Deselecc. todos (Si hay, al menos, un archivo seleccionado)) Puede cancelar la selección de todos los archivos. N La marca c indica que el archivo correspondiente seleccionado está oculto. Información Se muestra la información del archivo de película, incluidos el orden del archivo en el directorio actual, el nombre, el tamaño, la fecha de modificación y la ruta. O De manera alternativa, se puede seleccionar una película en la lista y pulsar el botón INFO para ver la información. Retirar con seg Puede quitar el dispositivo del televisor con seguridad. Copiar Copiar grupo actual MOVIE_005 .avi Información MOVIE_000 .avi Retirar con seg MOVIE_004 MOVIE_003 Español - 45 BN68-02269A_SPA.indd 45 2009-03-31 오후 12:59:12 ▶ Reproducción de un archivo de película ❑ Reproducción de un archivo de película r 1. Pulse el botón MEDIA.P del mando a distancia para que se muestre el menú r 00:00:02 / 00:01:55 Media Play. 2. Pulse los botones ◄ o ► para seleccionar Película y, a continuación, pulse el botón ENTERE. 3. Pulse los botones ◄ o ► para seleccionar la película que desea reproducir. 4. Pulse el botón (Play) / ENTERE button. N El archivo seleccionado se visualiza en la parte superior con su tiempo de reproducción. E Pausa lr Saltar USB N La duración de la reproducción de un archivo de película puede visualizarse como 00:00:00 si la información del tiempo de reproducción no se encuentra al inicio del archivo. N Pulse el botón ◄ mientras reproduce un archivo de vídeo para rebobinar. N Pulse el botón ► para hacer un avance rápido. N Formatos de vídeo admitidos 1/3 MOVIE_000.avi Archivo Extensión Contenedor *.avi AVI *.mkv MKV *.asf ASF *.wmv (VC1) *.mp4 MP4 (SMP4) *.3gp 3GPP *.vro (ps) VRO / VOB *.mpg *.mpeg (ps) others (ts) Decodificador de vídeo Divx 3.11 Divx 4.x Divx 5.1 Divx 6.0 XviD H.264 BP H.264 MP H.264 HP MPEG4 SP MPEG4 ASP Motion JPEG Divx 3.11 Divx 4.x Divx 5.1 Divx 6.0 XviD H.264 BP H.264 MP H.264 HP MPEG-4 SP MPEG-4 ASP Motion JPEG Divx 3.11 Divx 4.x Divx 5.1 Divx 6.0 XviD H.264 BP H.264 MP H.264 HP MPEG-4 SP MPEG-4 ASP Window Media Video v9 H.264 BP H.264 MP H.264 HP MPEG-4 SP MPEG-4 ASP XVID H.264 BP H.264 MP H.264 HP MPEG-4 SP MPEG-4 ASP MPEG2 MPEG1 MPE1 (Program Stream) MPE2 (Program Stream) MPEG2 (Transport Stream) H.264 (Transport Stream) T Herramientas R Regresar Códec de audio MP3, AC3, LPCM, ADPCM (MULAW ALAW) MP3, AC3, LPCM, ADPCM (MULAW ALAW), AAC WMA, MP3, AC3, LPCM, ADPCM, (MULAW ALAW), AAC ADPCM, (HE)-AAC, mp3 ADPCM, (HE)-AAC AC3, MPEG, LPCM AC3, MPEG, LPCM AAC, HE-AAC, MP3, DD+ VC1 (Transport Stream) Español - 46 BN68-02269A_SPA.indd 46 2009-03-31 오후 12:59:12 N Formatos de subtítulos admitidos Nombre MPEG-4 (texto basado en tiempo) SAMI SubRip SubViewer Micro DVD Extensión de archivo Formato .ttxt XML .smi .srt .sub .sub or .txt HTML basado en cadenas basado en cadenas basado en cadenas DivX Certified products using Home Theater Test Kit v3.0 or later : Plays DivX® video, including premium content. N Botones de control de la reproducción de vídeo ENTERE Reproducir/hacer una pausa en el archivo de película Reproducir el archivo de película Hacer una pausa en el archivo de película Salir del modo de reproducción y volver a la lista de películas. T TOOLS ◄/► Ejecutar diversas funciones desde los menús de películas. Saltar hacia adelante o hacia atrás en el archivo de película. ▲ Ir a la última vista del archivo actual. ▼ Ir a la primera vista del archivo actual. (Película) Doble velocidad Es posible que esta función no se admita, según el códec. ❑ Reproducción de un grupo de películas 1. 2. 3. 4. Pulse los botones ◄ o ► para seleccionar una norma de clasificación. (Vista básica, Fecha, Tiltle, Carpeta, Preferencias) Pulse los botones (REW) o (FF) para seleccionar el grupo deseado. Pulse dos veces el botón ▼ y, a continuación, pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar Repr. grupo actual y, a continuación, pulse el botón ENTERE. ❑ Reproducción de archivos de películas seleccionados 1. Pulse los botones ◄ o ► para seleccionar el archivo de película que desee en la lista. 2. Pulse el botón amarillo. Repita el proceso anterior para seleccionar varios archivos de películas. N La marca c aparece a la izquierda de los archivos de película seleccionados. N Para cancelar la selección de todos los archivos, pulse el botón TOOLS y seleccione Deselecc. todos. 3. Pulse el botón (reproducir)/ENTERE. N Sólo se reproduce el archivo seleccionado. ❑ Continuación de la reproducción de una película (Reanudar reproducción) Si sale de la función de reproducción de la película, ésta se puede reproducir posteriormente desde el punto en que se detuvo. 1.Seleccione el archivo de la película que desee seguir reproduciendo, pulsando los botones ◄ o ► en la lista de películas. 2. Pulse el botón (reproducir)/ENTERE. 3. Seleccione la opción Contin. con el botón azul. N La película se reproducirá desde el punto en que se detuvo la reproducción. N Si la función Recordatorio cont. pelíc está configurada como Encendido, aparece un mensaje emergente cuando se reproduce el archivo de película que se desea reproducir con la opción Contin.(Consulte la página 49) Español - 47 BN68-02269A_SPA.indd 47 2009-03-31 오후 12:59:13 ❑ Menú de herramientas de la reproducción de películas Configuración de la imagen / Configuración del sonido Consulte la página 48. Imagen Tamaño Ajustar el tamaño de la imagen según las preferencias. • Ajustar: Reproduce la película al tamaño de la pantalla del televisor. • Original: Reproduce la película al tamaño original. Configuración subtítulo Puede reproducir las películas con subtítulos • Subtítulo: Encendido / Apagado • Tamaño subtítulo: Grande / Pequeño / Normal • Sincronización subtítulo: Ajusta la hora de entrada del subtítulo. • Reiniciar sincr.subtítulo: Restablece los valores predeterminados de la sincronización. Información Se muestra la información del archivo de película. Tools Picture Setting Sound Setting Picture Size Caption Setting Information Safe Remove : U Move Fit Enter e Exit Retirar con seg Puede quitar el dispositivo del televisor con seguridad. Configuración de imagen y música Cuando se ve una presentación o se escucha música con el reproductor multimedia, se puede configurar la imagen y el sonido. ❑ Configuración de la imagen 1. Pulse el botón TOOLS durante una presentación o mientras se reproduce una película. 2. Pulse los botones ▲ o ▼ para seleccionar Configuración de la imagen, pulse el botón ENTERE. 3. Pulse los botones ◄ o ► para seleccionar el Modo imagen (Dinámico, Normal, Eco o Película). 4. Pulse los botones ▲ o ▼ para desplazarse hasta un elemento. (Contraste, Brillo, Color, Contraste Dinám., Tono negro, o Reiniciar) N Seleccione Reiniciar para inicializar la configuración de la imagen. Configuración de la imagen Modo imagen Contraste Brillo Color Contraste Dinám. Tono del negro Reiniciar ◄ Normal ► : 95 : 45 : 50 : Medio : Apagado U Mover L Ajustar Ingresar e Regresar 5. Pulse los botones ◄���� o► � para ajustar la configuración. ❑ Configuración del sonido Configuración del sonido 1. Pulse el botón TOOLS durante una presentación o mientras se reproduce una película. 2. Pulse los botones ▲ o ▼ para seleccionar Configuración del sonido, pulse el botón ENTERE. 3. Pulse los botones ◄ o ► para seleccionar Modo sonido. (Normal, Música, Película, Voz clara o Favorito) 4. Pulse los botones ▲ o ▼ para ir a un elemento. (Balance, 100Hz / 300Hz / 1kHz / 3kHz / 10kHz o Reiniciar) N Seleccione Reiniciar para inicializar la configuración del sonido. Modo Sonido Balance 100Hz 300Hz 1KHz 3KHz 10KHz Reiniciar ◄ Favorito ► : L50 R50 : 0 : 0 : 0 : 0 : 0 U Mover L Ajustar Ingresar e Regresar 5. Pulse los botones ◄���� o► � para ajustar la configuración. Español - 48 BN68-02269A_SPA.indd 48 2009-03-31 오후 12:59:13 Uso del menú de configuración En la pantalla de configuración se muestran los parámetros del menú Media Play. 1. Pulse el botón MEDIA.P del mando a distancia para que se muestre el menú Media Play. 2. Pulse los botones ◄ o ► para seleccionar Setup y, a continuación, pulse el botón ENTERE. 3. Pulse los botones ▲ o ▼ para seleccionar la opción deseada. 4. Pulse los botones ◄ o ► para seleccionar la opción y, a continuación, pulse el botón ENTERE. N Para salir del modo Media Play pulse el botón MEDIA.P del mando a distancia. Usar vista color → Encendido / Apagado Seleccionar para ver la información del color en el menú de fotos. N Si está configurado como ENCENDIDO, se incrementa el tiempo de carga para reunir la información del color. Modo de repetición de música → Encendido /Apagado Seleccionar para reproducir archivos de música repetidamente. Media Play USB : USB 148.48MB/149.00MB SETUP Photo Music Movie Setup USB Dispositivo e Salir Setup Recordatorio cont. pelíc. → Encendido / Apagado Seleccionar para mostrar un mensaje de ayuda desplegable para la reproducción continua de la película. Usar vista color ◄ Apagado ► Modo de repetición de música Encendido Recordatorio cont. pelíc. Encendido Obtener código de registro de DivX®® VOD Obtener código desactivación DivX® VOD Tiempo ejec.protect.pant. 10 min Información Retirar con seg USB Dispositivo Mover Ajustar Regresar Obtener código de registro de DivX® VOD Muestra el código de registro autorizado para el televisor. Si se conecta al sitio web de DivX y se guarda el código de registro con una cuenta personal, se puede descargar el archivo de registro VOD. Si reproduce el registro VOD mediante el reproductor multimedia, el registro se ha terminado. N Para obtener más información sobre DivX® VOD, visite www.DivX.com. Obtener código desactivación DivX® VOD Si no se ha registrado DivX® VOD, aparece el código de desactivación del registro.Si ejecuta esta función cuando DivX® VOD se ha registrado, el registro DivX® VOD actual se desactiva. Tiempo ejec.protect.pant. → 10 min / 20 min / 40 min / 1 hora Seleccionar para configurar el tiempo de espera antes de que se active el salvapantallas. Información Seleccionar para ver la información del dispositivo conectado. Retirar con seg Puede quitar el dispositivo del televisor con seguridad. Español - 49 BN68-02269A_SPA.indd 49 2009-03-31 오후 12:59:13 Media Play-DLNA Configuración de la red DLNA DLNA permite ver en el televisor vídeos e imágenes guardados en el ordenador a través de una conexión de red en modo Media Play. Para utilizar DLNA, es necesario conectar el televisor a la red e instalar la aplicación DLNA en el ordenador. ❑ Conexiones de red para el reproductor multimedia DLNA. PC TV LAN LAN Módem externo (ADSL/VDSL/Cable TV) 1 2 3 1. Conecte el puerto LAN del televisor y el módem externo con un cable LAN. 2. Conecte el ordenador en el que se instalará el programa DLNA PC Share Manager y el módem externo con un cable LAN. 3. Conecte el puerto LAN de la pared y el módem externo con un cable de módem. ❑ Conexión a la red 1. Cuando haya finalizado la conexión a la red, configure ésta en el televisor. (consulte Conexión de red en el capítulo Internet@TV) N Las conexiones inalámbricas a Internet no son compatibles con DLNA. N Las tres partes (dirección de la subred) antes de las direcciones de TV e IP PC debe ser las mismas. La última parte (dirección del host) se debe cambiar. (Por ejemplo, dirección IP : 123.456.789.** ) 2. Realice una Prueba de red para comprobar la configuración de la red. Instalación de la aplicación DLNA Para reproducir contenidos del ordenador en el televisor, primero hay que instalar la aplicación. Requisitos del sistema 1. Inserte en el ordenador el CD del programa suministrado con el televisor. 2. Se necesitan 20 MB de espacio en el disco para la instalación del programa. N Si se comparten archivos, se necesitan hasta 20 MB de espacio en disco duro por cada 100 archivos. N Si se cancela el acceso compartido a archivos, también se libera el espacio en el disco duro utilizado para la información de las miniaturas. Formatos compatibles 1. Imagen: JPEG (jpg, jpeg) 2. Audio: MP3 (mp3) 3. Vídeo: MPEG1 (mpg, mpeg), MPEG2 PS/TS (mpg, mpeg, trp, ts, tp), divx (mpg, mpeg, avi), MPEG4/H.264 (mpg, mpeg) Español - 50 BN68-02269A_SPA.indd 50 2009-03-31 오후 12:59:14 Instalación de la aplicación 1. Ejecute el archivo Setup.exe que se encuentra en el CD del programa suministrado con el producto. N Otra opción es descargar el archivo desde www.samsung.com. 2. Instale SAMSUNG PC Share Manager como se muestra en las ilustraciones. ► ► ► ► ► 3. Cuando la instalación haya finalizado, se mostrará en el PC el icono de PC Share Manager. N Haga doble clic sobre el icono para ejecutar el programa. Español - 51 BN68-02269A_SPA.indd 51 2009-03-31 오후 12:59:15 Uso de la aplicación DLNA Pantalla del programa 1 2 3 4 8 5 6 1. 2. 3. 4. 5. 6. 7. 8. 7 Menús: Archivo, Compartir, Servidor y Ayudar. Haga clic para compartir la carpeta del servidor PC seleccionado. Haga clic para cancelar el acceso compartido. Haga clic para actualizar la carpeta y los archivos del ordenador. Haga clic para sincronizar el estado de acceso compartido. Se mostrarán las carpetas y los archivos del ordenador que se compartirán. Se mostrarán las carpetas que comparte el usuario. El nombre del servidor PC que se muestra en la lista de dispositivos del reproductor multimedia. ❑ Archivos Property: Muestra información sobre el archivo o la carpeta seleccionados. • Método 1: Seleccione un archivo o una carpeta, seleccione el menú File (Archivo) y, a continuación, seleccione el submenú Property. • Método 2: Seleccione un archivo o una carpeta, haga clic con el botón derecho sobre el archivo o la carpeta seleccionados y después seleccione Property desde el menú emergente. <Método 1> <Método 2> Name Name Name Modified Modified Modified Name Name Name Name Name Name Name Modified Name Name Salir: Sale de la aplicación DLNA. Si selecciona Salir sin aplicar los cambios después de cambiar el estado del acceso compartido, se mostrará un mensaje que pregunta si desea aplicar al ordenador los ajustes que se han cambiado. Seleccione Sí para aplicar los cambios y salir de la aplicación. Name Name Name Name Yes Yes Yes No No No Yes No Español - 52 BN68-02269A_SPA.indd 52 2009-03-31 오후 12:59:16 ❑ Compartir Compartición de una carpeta Se pueden compartir carpetas entre el ordenador y el televisor. El número máximo de carpetas que se pueden compartir es de 32. N El ordenador actuará como servidor del televisor. • Método 1: Seleccione una carpeta desde My Computer (Mi PC), seleccione el menú Share (Compartir) y, a continuación, seleccione el submenú Share Folder (Compartir carpeta). • Método 2: Seleccione una carpeta desde My Computer (Mi PC), haga clic con el botón derecho sobre la carpeta seleccionada y seleccione Share Folder (Compartir carpeta) desde el menú emergente. • Método 3: Sitúe el puntero del ratón sobre una carpeta del panel izquierdo de la lista de carpetas de My Computer (Mi PC) y arrastre y suelte la carpeta en el panel Shared Folders (Carpetas compartidas). Si aparece un mensaje que le pide que confirme la carpeta compartida, seleccione Sí. <Método 1> <Método 2> <Método 3> Cancelación de la compartición de una carpeta Se puede cancelar el acceso a una carpeta compartida en el ordenador. Seleccione una carpeta del panel Shared Folder (Carpeta compartida) y seleccione Unshare Folder (No compartir carpeta). • Método 1: Seleccione una carpeta del panel Shared Folder (Carpeta compartida), seleccione el menú Share (Compartir) y después seleccione Unshare Folder (No compartir carpeta). • Método 2: Seleccione una carpeta del panel Shared Folder (Carpeta compartida), haga clic con el botón derecho sobre la carpeta seleccionada y seleccione Unshare Folder (No compartir carpeta) desde el menú emergente. • Método 3: Sitúe el puntero del ratón sobre una carpeta del panel Shared Folder (Carpeta compartida) y arrastre y suelte la carpeta en el panel My Computer (Mi PC). Si aparece un mensaje que le pide que confirme la cancelación, seleccione Sí. <Método 1> <Método 2> <Método 3> Aplicación de la configuración actual Realice este procedimiento cuando sea necesario sincronizar debido a la creación de una nueva carpeta compartida o a la cancelación de una carpeta compartida. El menú Set Changed State (Configurar estado cambiado) aplica los cambios a las carpetas compartidas según los datos guardados con el programa de acceso compartido del ordenador. Dado que la aplicación de los cambios a los datos internos es un proceso requiere tiempo, esta función permite a los usuarios aplicar los cambios a los datos sólo cuando sea necesario. Mientras no se seleccione el menú Set Changed State (Configurar estado cambiado) no se aplicará el estado cambiado de la carpeta compartida al servidor. Los cambios en las carpetas compartidas no se aplican al ordenador hasta que se selecciona el menú Set Changed State (Configurar estado cambiado). • Método 1: Seleccione el menú Share (Compartir) y seleccione el submenú Refresh DB (Actualizar DB). • Método 2: Haga clic en el icono Set Changed State (Configurar estado cambiado). Español - 53 BN68-02269A_SPA.indd 53 2009-03-31 오후 12:59:17 Configuración de los permisos de acceso Para que el televisor encuentre el ordenador, es necesario ajustar el televisor en Set Device Policy (Configurar norma dispositivo) en la ventana de ajuste de los permisos de acceso. Además, es necesario que el ordenador servidor y el televisor se encuentren en la misma subred. • Método : Seleccione el menú Share (Compartir) y seleccione Set Device Policy (Configurar norma dispositivo). ❑ Servidor Servidor Puede iniciar o detener utilizando el ordenador como servidor. Iniciar servidor al arrancar Windows Puede determinar si desea que el servidor del ordenador se inicie automáticamente cuando arranque Windows. Cambiar nombre servidor Es posible cambiar el nombre al servidor del ordenador. Escriba un nuevo nombre y haga clic en OK (Aceptar). El nuevo nombre aparecerá en la parte superior derecha de la ventana y se mostrará en el televisor. ❑ Ayuda Versión Se muestra un cuadro de mensaje con información sobre la versión del programa. Español - 54 BN68-02269A_SPA.indd 54 2009-03-31 오후 12:59:17 Uso de la función DLNA ❑ Uso del menú DLNA DLNA (Digital Living Network Alliance) permite reproducir el contenido guardado en un servidor DLNA (normalmente un ordenador) conectado al televisor o a través de una red. Media Play USB : USB 148.48MB/149.00MB PHOTO El reproductor multimedia permite reproducir contenidos guardados en un dispositivo de memoria USB conectado al televisor, mientras que DLNA permite reproducir contenido guardado en un servidor DLNA (el ordenador) conectado al televisor o a través de la red. Los procedimientos para usar los contenidos son los mismos que los Photo Music Movie Setup del reproductor multimedia. Regresar USB Dispositivo N Si instala en un ordenador el programa PC Share Manager que se suministra con el televisor, puede hacer que el ordenador actúe como servidor DLNA de la red. 1. Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Aplicaciones y, a continuación, pulse el botón ENTERE. 2. Pulse los botones ▲ o ▼ para seleccionar Media Play (USB & DLNA) y, a continuación, pulse el botón ENTERE. 3. Pulse los botones ◄ o ► para seleccionar un icono (Foto, Música, Película, Configuración) y, a continuación, pulse el botón ENTERE. - Las funciones de música de fondo y configuración de la música de fondo. - La clasificación de archivos por preferencias en las carpetas de fotos, música y películas. - La función del cambio de información del grupo. - Las funciones de copiar/borrar. - La función de extracción segura. - El botón (REW) / (FF) funciona durante la reproducción de las películas. - La función que permite ver una película desde el último punto de visualización. N Es posible que las funciones de omitir (botones ◄/►) y de pausa no funcionen mientras se reproduce una película para el N N N N DLNA de otros fabricantes, según la información de contenidos correspondiente. Es posible que no se muestre el tiempo de reproducción mientras se visualiza una película. Es posible que la función de omitir no funcione con algún contenedor como asf y mkv. No se admite el subtítulo incorporado, Multi-audio ni DivX DRM Samsung PC Share Manager debe ser compatible con el programa cortafuegos del ordenador. Español - 55 BN68-02269A_SPA.indd 55 2009-03-31 오후 12:59:17 Anynet+ Conexión de dispositivos Anynet+ El sistema Anynet+ se puede utilizar sólo con los dispositivos Samsung que tengan la función Anynet+. Para asegurarse de que el dispositivo de Samsung tenga dicha función, compruebe si lleva el logotipo Anynet+. Conecte el puerto LAN del panel posterior del televisor y el módem externo con un cable LAN. ❑ Para conectar al televisor 1. Conecte los terminales HDMI IN (1, 2(DVI), 3 or 4) del televisor y el terminal HDMI OUT del dispositivo Anynet+ correspondiente mediante un cable HDMI. Dispositivo Anynet+ 2 Dispositivo Anynet+ 1 TV Cable HDMI 1.3 Cable HDMI 1.3 Dispositivo Anynet+ 4 Dispositivo Anynet+ 3 Cable HDMI 1.3 Cable HDMI 1.3 ❑ Para conectar al sistema Home Cinema 1. Conecte los terminales HDMI IN (1, 2(DVI), 3 or 4) del televisor y el terminal HDMI OUT del dispositivo Anynet+ correspondiente mediante un cable HDMI. 2. Conecte el terminal HDMI IN del sistema Home Cinema y el terminal HDMI OUT del dispositivo Anynet+ correspondiente mediante un cable HDMI. TV Dispositivo Anynet+ 1 Sistema Home Cinema Cable óptico Cable HDMI 1.3 Cable HDMI 1.3 Dispositivo Anynet+ 2 Dispositivo Anynet+ 3 Dispositivo Anynet+ 4 Cable HDMI 1.3 Cable HDMI 1.3 Cable HDMI 1.3 N Conecte un cable óptico entre el terminal DIGITAL AUDIO OUT (OPTICAL) del televisor y el terminal de entrada de audio digital del sistema Home Cinema. N Si se sigue la conexión de la página anterior, el terminal Optical sólo produce la salida de 2 canales de audio. Sólo oirá sonido N N N N de los altavoces frontales izquierdo y derecho y del subwoofer del sistema Home Cinema. Para escuchar el canal de audio 5.1, conecte el terminal Digital Audio Out (Optical) del reproductor de DVD/Blu-ray o del decodificador de cable/satélite (dispositivo Anynet 1 o 2) directamente al amplificador o al sistema Home Cinema, no al televisor. Consulte el manual del usuario del sistema Home Cinema para obtener más información. Conecte sólo un sistema Home Cinema. Algunos cables HDMI pueden no admitir las funciones Anynet+. Anynet+ funciona cuando el dispositivo de AV que admite Anynet+ se encuentra en estado de espera o de encendido. Anynet+ admite hasta 12 dispositivos de AV en total. Tenga en cuenta que puede conectar hasta 3 dispositivos del mismo tipo. Español - 56 BN68-02269A_SPA.indd 56 Continúa… 2009-03-31 오후 12:59:19 Configuración de Anynet+ ❑ Configuración de Anynet+ Los parámetros siguientes ayudan a configurar las funciones Anynet+. Aplicaciones Anynet+ permite controlar con el mando a distancia del televisor Samsung todos los dispositivos de Samsung conectados que sean compatibles con Anynet+. Media Play (USB & DLNA) Anynet+ (HDMI-CEC)► Biblioteca de contenidos Internet@TV Centro de red doméstica T Pulse el botón TOOLS para usar el menú Herramientas. También puede mostrar el menú Anynet+ seleccionando Herramientas → Anynet+ (HDMI-CEC). Anynet+(HDMI-CEC) → Apagado / Encendido Para utilizar la función Anynet+, Anynet+ (HDMI-CEC) debe estar configurado como Encendido. N Cuando la función Anynet+ (HDMI-CEC) está desactivada, todas las operaciones relacionadas con Anynet+ se desactivan. Anynet+(HDMI-CEC) : Encendido Apagado Automático : Sí Apagado Automático → No / Sí Si establece Apagado Automático como Sí, los dispositivos conectados externos se apagan cuando el televisor se apaga. N Si un dispositivo externo todavía está grabando, puede apagarse o no. U Mover E Ingresar ▶ R Regresar Conmutación entre dispositivos Anynet+ 1. Pulse el botón TOOLS. Pulse el botón ENTERE para seleccionar Anynet+ (HDMI-CEC). 2. Pulse los botones ▲ o ▼ para seleccionar Lista Disp. y, a continuación, pulse el botón ENTERE. N Se muestran todos los dispositivos Anynet+ conectados al televisor. Si no encuentra el dispositivo que desea, pulse el botón rojo para buscar los dispositivos. N Sólo cuando Anynet+ (HDMI-CEC) se configura como Encendido en el menú Configuración, aparece el menú Lista Disp.. 3. Pulse los botones ▲ o ▼ para seleccionar un dispositivo determinado y pulse el botón ENTERE. Se cambia al dispositivo seleccionado. Ver TV Lista Disp. Grabando MODO DVDR DVDR INFO Receptor Configuración : DVDR : Encendido U Mover E Ingresar R Regresar N El cambio a los dispositivos seleccionados puede tardar unos 2 minutos. N El tiempo necesario para la búsqueda de dispositivos depende de la cantidad de dispositivos conectados N Aunque el televisor busca automáticamente la lista de dispositivos cuando se enciende con el botón de alimentación, es posible que los dispositivos conectados al televisor no aparezcan siempre automáticamente en la lista de dispositivos. Pulse el botón rojo para buscar el dispositivo conectado. N Si ha seleccionado un dispositivo externo pulsando el botón SOURCE, no podrá usar la función Anynet+. Asegúrese de cambiar a un dispositivo Anynet+ externo mediante el botón TOOLS. ❑ Menú Anynet+ El menú Anynet+ cambia según el tipo y el estado de los dispositivos Anynet+ conectados al televisor. Menú Anynet+ Ver TV Lista Disp. MENU (nombre_dispositivo) INFO (nombre_dispositivo) Grabando (grabador) Reserving Recording (Reservar grabación) Detener grabación Receptor Configuración Descripción El modo Anynet+ cambia al modo de emisión de TV. Muestra la lista de dispositivos de Anynet+. Muestra los menús del dispositivo conectado. Por ejemplo, si se ha conectado un grabador de DVD, se muestra el menú del disco del grabador de DVD. Por ejemplo, si se ha conectado un grabador de DVD, se muestra el menú del disco del grabador de DVD. Inicia una grabación inmediatamente. (Este menú sólo funciona en un dispositivo que admita grabación.) Permite reservar una grabación en el grabador. Detiene la grabación. La reproducción del sonido se efectúa a través del receptor. Configura la función Anynet+ (HDMI-CEC). N Cuando hay conectados varios dispositivos de grabación, éstos se muestran como (*grabador), pero si sólo hay conectado un dispositivo, éste se muestra como (*nombre_dispositivo). Español - 57 BN68-02269A_SPA.indd 57 Continúa... 2009-03-31 오후 12:59:19 ❑ Botones del mando a distancia del televisor disponibles en el modo Anynet+ Tipo de dispositivo Estado de funcionamiento Después de cambiar al dispositivo, cuando el menú de éste aparece en la pantalla. Dispositivo Anynet+ Botones disponibles Botones numéricos ▲/▼/◄/►/ENTERE Botones de colores/ botón EXIT (Búsqueda atrás) / (Búsqueda adelante) (Reproducir) / (Pausa) Después de cambiar al dispositivo, mientras se reproduce un archivo Dispositivo con sintonizador incorporado Después de cambiar al dispositivo, mientras se ve un programa de TV Botón CH Dispositivo de audio Cuando el receptor está activado Botón VOL / Botón MUTE M (Detener) / / N La función Anynet+ sólo funciona cuando la fuente activa del mando a distancia del televisor está ajustada en TV. funciona sólo cuando la grabación es posible. N El botón N Los dispositivos Anynet+ no se pueden controlar con los botones del TV. Los dispositivos Anynet+ sólo se pueden controlar mediante el mando a distancia del televisor. N El mando a distancia del televisor puede no funcionar en determinadas circunstancias. En ese caso, vuelva a seleccionar el dispositivo Anynet+. N Las funciones Anynet+ no funcionan con los productos de otros fabricantes. Las funciones / pueden variar según el dispositivo. Grabación El grabador de Samsung permite efectuar una grabación de un programa de televisión. 1. Pulse el botón TOOLS. Pulse el botón ENTERE para seleccionar Anynet+ (HDMI-CEC). 2. Pulse los botones ▲ o ▼ para seleccionar Grabando (grabador) y pulse el botón ENTERE. Comienza la grabación. N Cuando hay varios dispositivos de grabación conectados, éstos se muestran en Ver TV Lista Disp. Grabando MODO DVDR DVDR INFO Receptor Configuración : DVDR una lista. Pulse los botones ▲ o ▼ para seleccionar el dispositivo de grabación que : Encendido desee y pulse el botón ENTERE. Comienza la grabación. N Si no se muestra el dispositivo de grabación, seleccione Lista Disp. y pulse el botón U Mover E Ingresar R Regresar rojo para buscar los dispositivos. N Si pulsa el botón grabará lo que está viendo en ese momento. Si está viendo un vídeo desde otro dispositivo, se graba el vídeo de éste. N Antes de grabar, compruebe si la toma de antena está conectada correctamente al dispositivo de grabación. Español - 58 BN68-02269A_SPA.indd 58 2009-03-31 오후 12:59:20 Escucha a través de un receptor Se puede escuchar sonido a través de un receptor en lugar de hacerlo mediante el altavoz del TV. 1. Pulse el botón TOOLS. Pulse el botón ENTERE para seleccionar Anynet+ (HDMI-CEC). 2. Pulse el botón ▲ o ▼ para seleccionar Receptor. Pulse los botones ◄ o ► para seleccionar Encendido o Apagado. N Si el receptor sólo admite audio, quizás no se muestre en la lista de dispositivos. N El receptor no funcionará si no se ha conectado correctamente el terminal Optical IN N N N N Ver TV Lista Disp. Grabando MODO DVDR DVDR INFO Receptor Configuración : DVDR : Encendido U Mover E Ingresar R Regresar del receptor con el terminal Optical OUT del televisor. Cuando el receptor (sistema Home Cinema) está activado, se puede oír la salida de sonido desde el terminal óptico del televisor. Cuando se ve la televisión a través de un DTV (aéreo), el televisor envía el sonido de 5.1 canales al receptor del sistema Home Cinema. Cuando la fuente es un componente digital, como un DVD, y está conectada al televisor a través de HDMI, sólo se oye el sonido de 2 canales del receptor del sistema Home Cinema. Cuando se usa la función Media Play (USB & DLNA), el sonido puede no oírse adecuadamente a través del receptor. Cuando se escucha a través del receptor, hay restricciones para el uso de los menús PIP y los relativos al audio (MTS, idioma preferido). Si hay una interrupción en la alimentación del televisor con la opción Receptor configurada en Encendido puede que la opción Seleccionar altavoz esté configurada como Altavoz externo al volver a encender el televisor. (página 30) Solución de problemas de Anynet+ Síntoma Anynet+ no funciona. Solución • Compruebe si el dispositivo es un dispositivo Anynet+. • El sistema Anynet+ sólo admite dispositivos Anynet+. • Conecte sólo un receptor (sistema Home Cinema). • Compruebe si el cable de alimentación de Anynet+ está debidamente conectado. • Compruebe las conexiones de los cables de Vídeo / Audio /HDMI 1.3 del dispositivo Anynet+. • Compruebe si Anynet+ (HDMI-CEC) está establecido como Encendido en el menú de configuración de Anynet+. • Compruebe si el mando a distancia del televisor está en modo TV. • Compruebe si es un mando a distancia exclusivo para Anynet+. • Anynet+ no funciona en algunas situaciones. Búsqueda de canales, funcionamiento del reproductor multimedia (USB y DLNA), Plug & Play, etc.) • Cuando se conecta o se desconecta el cable HDMI 1.3, se. • Compruebe si el dispositivo Anynet+ está debidamente conectado al TV y si la opción Anynet+ (HDMI-CEC) del menú de configuración de Anynet+ está establecida en Encendido. Deseo iniciar Anynet+. • Compruebe si el dispositivo Anynet+ está debidamente conectado al TV y si la opción Anynet+ (HDMI-CEC) del menú de configuración de Anynet+ está establecida en Encendido. • Pulse el botón TV del mando a distancia del televisor para cambiar a TV. A continuación pulse el botón TOOLS para visualizar el menú Anynet+ y seleccione el menú que desee. Deseo salir de Anynet+. • Seleccione Ver TV en el menú Anynet+. • Pulse el botón SOURCE del mando a distancia del televisor y seleccione un dispositivo que no sea Anynet+. (Tenga en cuenta que el botón de canal sólo funciona cuando no hay ningún dispositivo Anynet+ con sintonizador incorporado conectado.) En la pantalla aparece el mensaje Conectando al dispositivo Anynet+... • El mando a distancia no se puede utilizar cuando se está configurando Anynet+ o cambiando a un modo de visualización. • Utilice el mando a distancia cuando haya terminado la configuración de Anynet+ o el cambio al modo de visualización. El dispositivo Anynet+ no funciona. • No se puede usar la función de reproducción mientras se efectúa una conexión Plug & Play. El dispositivo conectado no se muestra. • Compruebe si el dispositivo admite las funciones Anynet+. • Compruebe si el cable HDMI 1.3 está debidamente conectado. • Compruebe si Anynet+ (HDMI-CEC) está establecido como Encendido en el menú de configuración de Anynet+. • Vuelva a efectuar una búsqueda de dispositivos Anynet+. • Sólo puede conectar un dispositivo Anynet+ mediante el cable HDMI 1.3. Algunos cables HDMI pueden no admitir las funciones Anynet+. • Si se ha interrumpido por una situación anormal como la desconexión del cable HDMI o el de alimentación o por un fallo en la corriente eléctrica, deberá repetir la búsqueda del dispositivo. El programa de televisión no se puede grabar. El sonido del televisor no sale a través del receptor. • Compruebe la conexión de la toma de antena del dispositivo de grabación. • Conecte el cable óptico entre el televisor y el receptor. Español - 59 BN68-02269A_SPA.indd 59 2009-03-31 오후 12:59:20 Biblioteca de contenidos Activación de la biblioteca de contenidos 1. Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar Aplicaciones y, a continuación, pulse el botón ENTERE. 2 Pulse los botones ▲ o ▼ para seleccionar Biblioteca de contenidos y, a continuación, pulse el botón ENTERE. Media Play (USB & DLNA) Aplicaciones La Biblioteca de contenidos permite ver o reproducir los contenidos incorporados en el TV o almacenados en un dispositivo USB. Las funciones de borrar, mover y actualizar no funcionarán con los contenidos incorporados en el TV. Anynet + (HDMI-CEC) Biblioteca de contenidos Internet@TV Centro de red doméstica O Pulse el botón CONTENT del mando a distancia para que se muestre el menú principal Biblioteca de contenidos. 3. Pulse los botones ◄ o ► para seleccionar un icono (Galería, Cocina, Niños, Bienestar, Otros, Gestión del contenido) y, a continuación, pulse el botón ENTERE. N Se ejecuta el elemento seleccionado. Content Library Galería < Galería Cocina Niños Bienestar Regresar Otros > Salir ❑ Uso de los botones del mando a distancia en el menú Biblioteca de contenidos Botón Función ▲/▼/◄/► Mover el cursor y seleccionar una opción. ENTERE Seleccionar la opción marcada. RETURN EXIT Volver al menú anterior. Detener la función actual y volver al menú principal Biblioteca de contenidos. Color Button El botón de cada función se describe en su página correspondiente. VOL Puede controlar el volumen del contenido que se reproduce. CONTENT Acceder a o salir del modo Biblioteca de contenidos. N Si pulsa los botones de volumen o MMUTE, no se mostrará la pantalla OSD, pero el volumen cambiará correctamente. N Para volver al modo TV, pulse los botones CH del mando a distancia. N LA BIBLIOTECA DE CONTENIDOS INCLUYE TEXTOS, GRÁFICOS, IMÁGENES, MULTIMEDIA Y OTROS MATERIALES CON FINES SÓLO INFORMATIVOS Y PUBLICITARIOS. LOS MATERIALES DE LA BIBLIOTECA DE CONTENIDOS SE HAN MODIFICADO Y SE MANTIENEN REVISADOS Y ACTUALIZADOS. LOS MATERIALES DE LA BIBLIOTECA DE CONTENIDOS PUEDEN NO SER APROPIADOS PARA TODAS LAS AUDIENCIAS. N LA INFORMACIÓN DE LA BIBLIOTECA DE CONTENIDOS SE PROPORCIONA “TAL CUAL”. AUNQUE LA INFORMACIÓN PROPORCIONADA EN LABIBLIOTECA DE CONTENIDOS SE HA OBTENIDO O RECOPILADO EN FUENTES QUE CONSIDERAMOS FIABLES, SAMSUNG NO PUEDE GARANTIZAR NI GARANTIZA LA PRECISIÓN, VALIDEZ, VIGENCIA O INTEGRIDAD DE CUALQUIER INFORMACIÓN O DATO DISPONIBLE PARA UN PROPÓSITO EN PARTICULAR. BAJO NINGUNA CIRCUNSTANCIA, INCLUIDA NEGLIGENCIA, SAMSUNG SE HARÁ RESPONSABLE, YA SEA POR CONTRATO YA SEA POR AGRAVIO, DE CUALQUIER DAÑO DIRECTO, INDIRECTO, INCIDENTAL, ESPECIAL OCONSECUENTE, GASTOS LEGALES, PAGOS Y CUALQUIER OTRO DAÑO DERIVADOS DE O RELACIONADOS CON CUALQUIER INFORMACIÓN INCLUIDA, O COMO RESULTADO DEL USO DE LA BIBLIOTECA DE CONTENIDOS, NI SIQUIERA EN EL CASO DE QUE SE HAYA ADVERTIDO DE LA . Español - 60 BN68-02269A_SPA.indd 60 2009-03-31 오후 12:59:20 Uso de la biblioteca de contenidos ❑ Galería Esta función reproduce una presentación de fotos con imágenes en alta resolución y música de fondo, y produce varios ambientes. Con la función Galería del televisor, se puede cambiar el ambiente de casa. N Pulse el botón INFO para ver información detallada en inglés sobre los autores y las imágenes (en la actualidad esta información sólo se presenta en inglés). N Puede hacer una pausa en la presentación pulsando el botón ENTERE. N Los copyrights de los contenidos del apartado Galería y todas las cuestiones relacionadas con ellos están reservados por TimeSpace/JoongAng M&B, Inc. ❑ Cocina Muestra varias recetas que después se pueden seguir fácilmente paso a paso. Disfrute de estos contenidos que le ofrecen excelentes sugerencias para preparar comidas. N Las recetas incluidas en el apartado Cocina del TV Samsung se basan en recetas publicadas por Anness Publishing. N Los copyrights de los contenidos de Cocina y todas las cuestiones relacionadas con los mismos están reservados por Practical Pictures. ❑ Niños Incluye contenido educativo e interactivo que pueden ver los niños indefinidamente. Disfrute de las historias, las canciones y los juegos incluidos con los personajes Boowa y Kwala. N Los copyrights de los contenidos de Niños y todas las cuestiones relacionadas con los mismos están reservados por UpToTen. ❑ Bienestar Incluye contenidos para un estilo de vida saludable, como ejercicios de estiramientos, y música, de los que puede disfrutar toda la familia. ❑ Otros El contenido predeterminado no se guarda en la memoria del televisor. N Puede copiar contenido nuevo en la memoria del televisor mediante la pantalla Gestión de contenido. ❑ Gestión del contenido Puede añadir o borrar contenido mediante Gestión de contenido. Mis contenidos Los contenidos se manejan de la misma forma que los incluidos en la memoria del televisor. También puede borrar o reproducir cada contenido. - Seleccione un elemento de contenido y pulse el botón ENTERE. Puede reproducir o borrar el elemento de contenido seleccionado Descarga Internet Si conecta el televisor a Internet mediante un cable LAN, puede descargar directamente los contenidos proporcionados por Samsung Electronics. - Seleccione un elemento de contenido y pulse el botón ENTERE. Puede reproducir el elemento de contenido seleccionado o copiarlo en la memoria del televisor. USB Puede comprobar el contenido de cada subelemento de la biblioteca de contenidos guardado en el dispositivo USB. - Seleccione un elemento de contenido y pulse el botón ENTERE. Puede reproducir el elemento de contenido seleccionado o copiarlo en la memoria del televisor. N Biblioteca de contenidos sólo admite dispositivos USB de clase de almacenamiento masivo (MSC). MSC es un dispositivo de clase de almacenamiento masivo sólo de transporte de gran capacidad. Ejemplos de MSC son las unidades de almacenamiento en miniatura y los lectores de tarjetas Flash (no se admite ni disco duro de USB ni de HUB). N Jugar a un juego con un dispositivo de memoria USB externa le permitirá guardar el estado del juego (dependiendo del juego). Tenga cuidado de no retirar el dispositivo de memoria USB mientras se están guardando datos en el mismo, ya que esto podría provocar la pérdida de los datos. N Descarga de contenidos nuevos New content other than the built-in content will be provided via the Samsung.com website free of change. When you download the paid contents, you need UDN number to download contents. Check the UDN number before downloading a new content item. 1. Visite la página web www.samsung.com. 2. Seleccione un elemento de contenido en la página de descargas de contenidos. 3. Descargue los contenidos en el dispositivo de memoria USB. 4. Vaya al menú principal de la Biblioteca de contenidos pulsando el botón CONTENT o eligiendo Biblioteca de contenidos (Menu → Aplicaciones → Biblioteca de contenidos) 5. Enchufe la memoria USB en el puerto USB situado en el lateral del televisor. 6. Puede ver el subelemento del contenido que ha descargado. 7. Seleccione un elemento de contenido y pulse el botón ENTERE. 8. Puede reproducir el elemento de contenido seleccionado o copiarlo en la memoria del televisor. Configuración • Tiempo ejec.protect.pant.→ 10 min / 20 min / 40 min / 1 hora Configurar el tiempo de espera necesario para que se ejecute el salvapantallas. • Guardar UDN (número de dispositivo exclusivo) El código numérico de 18 dígitos que aparece en pantalla es el código del producto. Puede guardarlo en la memoria USB. N El dispositivo de almacenamiento USB de formato NTFS no admite que se guarde el UDN. Se recomienda que use el dispositivo de almacenamiento USB de formato FAT. Español - 61 BN68-02269A_SPA.indd 61 2009-03-31 오후 12:59:20 red Conexión de la red Conexión de red para DLNA, descarga de Internet-Biblioteca de contenidos, Internet@TV y Centro red doméstica. ❑ Conexión con la red - Cable Conexión por cable para un entorno DHCP A continuación se describe el procedimiento para configurar la red mediante el protocolo de configuración dinámica de host (DHCP). Dado que la dirección IP, la máscara de subred, la puerta de enlace y el DNS se asignan automáticamente cuando se selecciona DHCP, no es necesario introducirlos manualmente. Panel posterior del TV Puerto del módem en la pared Módem externo (ADSL/VDSL/TV por cable) 1 LAN Cable 2 Cable del módem 1. Conecte el puerto LAN del panel posterior del televisor y el módem externo con un cable LAN. 2. Conecte el puerto LAN de la pared y el módem externo con un cable de módem. Puede conectar la LAN con un compartidor (enrutador). Compartidor IP Puerto del módem en la pared Módem externo(ADSL/ VDSL/TV por cable) Cable LAN Panel posterior del TV Cable LAN Modem Cable Puede conectar el puerto LAN y el televisor directamente según el estado de la red. Panel posterior del TV Puerto del módem en la pared Cable LAN N Los terminales (la posición del puerto y el tipo) del dispositivo externo pueden variar según el fabricante. N Si falla la asignación de la dirección IP por el servidor DHCP, apague el módem externo, vuelva a encenderlo al menos después de 10 segundos e inténtelo de nuevo. N Para las conexiones entre el módem externo y el compartidor (enrutador), consulte el manual del usuario del producto correspondiente. N Puede conectar el televisor a la LAN directamente sin usar compartidor (enrutador). N No puede usar un módem ADSL de tipo de conexión manual ya que no admite DHCP. Se debe usar un módem ADSL de tipo de conexión automática. Español - 62 BN68-02269A_SPA.indd 62 2009-03-31 오후 12:59:23 Conexión LAN para un entorno IP estático A continuación se describe el procedimiento para configurar la red con una dirección IP estática. Se debe introducir manualmente la dirección IP, la máscara de subred, la puerta de enlace y el DNS proporcionados por el proveedor de servicios de Internet (ISP). Panel posterior del TV Puerto del módem en la pared 1 Cable LAN 1. Conecte el puerto LAN del panel posterior del televisor y el puerto LAN de la the LAN cable. Puede conectar la LAN con un compartidor (enrutador). Puerto del módem en la pared Compartidor IP Cable LAN Panel posterior del TV Cable LAN N Los terminales (la posición del puerto y el tipo) del dispositivo externo pueden variar según el fabricante. N Si usa una dirección IP estática, su ISP le informará de la dirección IP, la máscara de subred, la puerta de enlace y el DNS. Debe introducir estos valores para completar la configuración de la red. Si no los conoce, consulte a su administrador de la red. N Para obtener información sobre cómo configurar y conectar un compartidor (enrutador), consulte el manual del usuario del producto correspondiente. N Puede conectar el televisor a la LAN directamente sin usar compartidor (enrutador). N Si usa un compartidor IP (enrutador IP) que admite DHCP, puede configurar el dispositivo como DHCP o IP estático. N Para saber cómo usar una dirección IP estática, consulte a su proveedor de servicios de Internet. Continúa... Español - 63 BN68-02269A_SPA.indd 63 2009-03-31 오후 12:59:24 ❑ Conexión con la red - Inalámbrica Es posible conectar a la red de manera inalámbrica a través de un compartidor IP inalámbrico. Panel lateral del TV Puerto del módem en la pared Compartidor IP inalámbrico Adaptador de LAN inalámbrica Samsung Cable LAN 1. Conecte el ‘adaptador de LAN inalámbrica de Samsung’ en el terminal USB1(HDD) o USB2 del televisor. N Para utilizar una red inalámbrica necesita el ‘adaptador de LAN inalámbrica de Samsung’. N El ‘adaptador de LAN inalámbrica de Samsung’ se vende por separado. Para adquirirlo, póngase en contacto con un agente o un centro de servicio técnico de Samsung Electronics. N Para utilizar una red inalámbrica, el televisor debe estar conectado a un compartidor IP inalámbrico. N Si el compartidor IP inalámbrico admite DHCP, el televisor puede utilizar DHCP o una dirección IP estática para conectarse a la red inalámbrica. N El adaptador de LAN inalámbrica de Samsung es compatible con IEEE 802.11A, IEEE 802.11B, IEEE 802.11G e IEEE 802.11N. Si reproduce el vídeo DLNA en una conexión IEEE 802.11B/G, es posible que el vídeo no se reproduzca correctamente. N Si el compartidor IP inalámbrico permite activar o desactivar la función de conexión Ping, actívela. N Seleccione un canal para el compartidor IP inalámbrico que no se esté usando en ese momento. Si el canal ajustado para el compartidor IP inalámbrico lo está usando en ese momento otro dispositivo cercano, se producirán interferencias y es posible que la comunicación falle. N Si se aplica un sistema de seguridad distinto de los sistemas que se muestran a continuación, no funcionará con el televisor. - Cuando se aplica la clave de seguridad para el punto de acceso (compartidor IP inalámbrico) sólo se admiten las opciones siguientes. 1) Modo de autenticación : OPEN, SHARED, WPAPSK, WPA2PSK 2) Tipo de cifrado : WEP, TKIP, AES - Cuando se aplica la clave de seguridad para el modo Ad-hoc, sólo se admiten las opciones siguientes. 1) Modo de autenticación : SHARED, WPANONE 2) Tipo de cifrado: WEP, TKIP, AES N Si el punto de acceso admite WPS (Configuración protegida Wi-Fi), puede conectarse a la red vía PBC (Configuración del botón) o PIN (Número de identificación personal). De cualquier modo, WPS configurará automáticamente las claves SSID y WPA. N Si el dispositivo no está certificado, quizás no se conecte al televisor a través del ‘adaptador de LAN inalámbrica de Samsung’. Español - 64 BN68-02269A_SPA.indd 64 2009-03-31 오후 12:59:25 Configuración de la red Seleccione Cable o Inalámbrico como método para conectar con la red. N El menú sólo se activa si está conectado el ‘adaptador de LAN inalámbrica de Samsung’. • Cable : Conecte la red mediante un cable. • Inalámbrico : Conecte la red de modo inalámbrico. Configuración ❑ Tipo de red : Apagado BD Wise : Encendido Tipo de red : Cable ► Configuración de red V-Chip Subtítulo Melodía : Medio Ahorro energía : Apagado PIP ❑ Configuración de red Modo Juego Configuración de red cableada (cuando Tipo de red está configurado como Cable) N Compruebe si el cable LAN está conectado. • Config. protocolo Internet → Config. automática / Config. manual • Prueba de red : Puede comprobar o confirmar el estado de conexión de la red después de configurarla. N Cuando no pueda conectarse a una red cableada Si su proveedor de servicios de Internet ha registrado la dirección MAC del dispositivo utilizado para conectarse a Internet por primera vez y autentifica la dirección MAC cada vez que se conecta a Internet, el televisor quizás no pueda conectarse a Internet ya que la dirección MAC difiere de la del dispositivo (PC). En tal caso, solicite a su proveedor de servicios de Internet que le explique el procedimiento para conectar dispositivos que no sean un ordenador (por ejemplo su televisor) a Internet. Si su proveedor de servicios de Internet necesita un ID o una contraseña para conectarse a Internet (red), su televisor quizás no pueda conectarse a Internet. En tal caso, debe introducir su ID o contraseña cuando se conecte a Internet mediante un compartidor de Internet (enrutador). La conexión de Internet puede fallar por problemas del servidor de seguridad. En este caso, póngase en contacto con el proveedor de servicios de Internet. Si no puede conectarse a Internet aunque haya seguido el procedimiento de su proveedor de servicios de Internet, debe ponerse en contacto con el centro de servicio técnico de Samsung Electronics a través de 1-800-SAMSUNG. ❑ Configuración red cableada Configuración red cableada - Config. automática Si se conecta el cable LAN en una ubicación que admita DHCP, los ajustes del protocolo de Internet (IP) se configurarán automáticamente. Compruebe si el cable LAN está conectado. 1. Establezca Tipo de red como Cable. 2. Seleccione Configuración red cableada. 3. Establezca Config. protocolo Internet como Configuración automática. N El protocolo de Internet se configura automaticamente. 4. Seleccione Prueba de red para comprobar la conectividad de la red. Configuración red cableada - Config. manual Para conectar el televisor a la LAN mediante una dirección IP estática, se debe configurar el protocolo de Internet (IP). N Compruebe si el cable LAN está conectado. (página 62) 1. 2. 3. 4. Establezca Tipo de red como Cable. Seleccione Configuración red cableada. Establezca Config. protocolo Internet como Configuración manual. Configure Dirección IP, Máscara de subred, Puerta de enlace y Servidor DNS. N Pulse los botones numéricos del mando a distancia para configurar la red manualmente. 5. Seleccione Prueba de red para comprobar la conectividad de la red. ❑ Configuración de una red inalámbrica N El menú sólo se activa si está conectado el ‘adaptador de LAN inalámbrica de Samsung’. (página 64) • Config. protocolo Internet → Config. automática / Config. manual • Prueba de red : Puede comprobar o confirmar el estado de conexión de la red después de configurarla. N Cuando no pueda conectarse a un punto de acceso Su televisor quizás no pueda encontrar un punto de acceso (PA) que esté configurado como un tipo SSID privado. En tal caso, cambie la configuración del PA y vuelva a intentar la operación. Si su proveedor de servicios de Internet ha registrado la dirección MAC del dispositivo utilizado para conectarse a Internet por primera vez y autentifica la dirección MAC cada vez que se conecta a Internet, el televisor quizás no pueda conectarse a Internet ya que la dirección MAC difiere de la del dispositivo (PC). En tal caso, solicite a su proveedor de servicios de Internet que le explique el procedimiento para conectar dispositivos que no sean un ordenador (por ejemplo su televisor) a Internet. Si no puede conectarse a Internet aunque haya seguido el procedimiento de su proveedor de servicios de Internet, debe ponerse en contacto con el centro de servicio técnico de Samsung Electronics a través de 1-800-SAMSUNG. Español - 65 BN68-02269A_SPA.indd 65 2009-03-31 오후 12:59:26 Seleccionar una red - Punto de acceso: Se puede seleccionar el compartidor IP que utilizar cuando se configura una red inalámbrica. clave *segur. N Si algún punto de acceso no aparece en la lista de selección de redes, pulse el A Configuración* de red inalámbrica * B C H I J botón rojo. O P Q N Cuando se establezca la conexión, volverá a la pantalla automáticamente. V W X N Si ha seleccionado un punto de acceso con autenticación de seguridad: Aparece la pantalla de la clave de seguridad. Especifique la clave de seguridad y pulse el n Mover botón azul del mando a distancia. N Utilice los botones del mando a distancia en la pantalla de introducción de la clave de seguridad. Botón Mueve la selección arriba/abajo/izquierda/derecha. ENTER Introduce el carácter seleccionado. Botón rojo Cambiar entre letras mayúsculas y minúsculas Botón azul E L S Z F M T G N U 0~9 * * * * * Número Minúsculas Borrar Completado Número E Ingresar R Regresar Permite borrar un carácter introducido. Pulse este botón para terminar de introducir la clave de seguridad. ❑ Conexión WPS (Configuración protegida Wi-Fi) D K R Y Función ▲/▼/◄/► Botón verde _ Si la clave de seguridad ya está configurada : En la lista de puntos de acceso, seleccione WPS. N Puede seleccionar PBC, PIN, Clave de seguridad. Configuración* de red inalámbrica * * Seleccionar una red * Buscar * Ad-Hoc 3/9 AP_1 AP_2 AP_3 AP_4 PBC PIN clave segur. * n Mover E Ingresar R Regresar • Conexión mediante PBC : Seleccione un PBC (Configuración del botón). Pulse el botón PBC en el punto de acceso (PA) antes de 2 minutos y espere a que se efectúe la conexión. Presione el botón PBC en el punto de acceso. Nombre del punto* de acceso : AP_3 Cancelar • Conexión mediante PIN : Seleccione un PIN (Número de identificación personal). N Se muestra un mensaje con el código PIN. Escriba el código PIN en el dispositivo del punto de acceso antes de 2 minutos. Seleccione Aceptar y espere a que se efectúe la conexión. N Si esta no funciona correctamente vuelva a intentarlo. N Cuando la conexión no se ha establecido a pesar de haberlo intentando de nuevo, reinicie el punto de acceso. Consulte el manual de cada punto de acceso. Presione Aceptar después de escribir el código PIN del TV mientras configura el punto de acceso. Nombre del punto de acceso : AP_3 Número PIN : 123 45678 • Conexión mediante la Clave de seguridad: Si selecciona Clave de seguridad, se muestra la ventana de entrada. Escriba la clave de seguridad y pulse el botón ENTERE. N Si esta no funciona correctamente vuelva a intentarlo. clave *segur. Aceptar Configuración* de red inalámbrica * A H O V B C I J P Q W X _* D K R Y n Mover Si la clave de seguridad no está configurada: Cuando no se ha establecido la configuración de seguridad de un punto de acceso que admita WPS, puede seleccionar PBC, PIN, Ninguna seguridad. Ninguna seguridad permite la conexión directa al punto de acceso sin utilizar la función WPC.Process of PBC, PIN is same as above. Refer to if Security Key is already set. N El procedimiento de PBC, PIN es el mismo que el anterior. Consúltelo si la clave de seguridad ya está configurada. N Si esta no funciona correctamente vuelva a intentarlo. Cancelar E L S Z F M T G N U 0~9 * * * * * Número Minúsculas Borrar Completado Número E Ingresar R Regresar Configuración* de red inalámbrica * * Seleccionar una red * Buscar * Ad-Hoc AP_1 AP_2 AP_3 AP_4 3/9 PBC PIN clave segur. * n Mover E Ingresar R Regresar Español - 66 BN68-02269A_SPA.indd 66 2009-03-31 오후 12:59:27 Ad-hoc: Puede conectarse a un dispositivo móvil sin punto de acceso a través de una mochila USB inalámbrica mediante una red par a par. • Cómo conectarse al nuevo Ad-hoc. El sistema de red actual quizás tenga la 1. Elija Seleccionar una red para que se muestre una lista de dispositivos. funcionalidad restringida. ¿Desea cambiar la 2. En la lista de dispositivos, pulse el botón azul del mando a distancia o seleccione conexión de red? Ad-hoc. No Sí N Se muestra el mensaje que indica que la red actual está desconectada. 3. Introduzca el Nombre de la red (SSID) y la clave de seguridad generados en el dispositivo con el que se desea conectar. • Cómo conectarse a un dispositivo Ad-hoc existente 1. Elija Seleccionar una red para que se muestre la lista de dispositivos. * 2. Seleccione el dispositivo que desee en la lista. 3. Si se ha aplicado la clave de seguridad, introdúzcala de nuevo. Si la red no funciona con normalidad, vuelva a comprobar el Nombre N Si la red no funciona con normalidad, vuelva a comprobar el Nombre de la red (SSID) y la clave de seguridad. Si la clave de seguridad no es correcta, ésta puede ser la razón del mal funcionamiento. Configuración red cableada - Configuración automática El compartidor IP inalámbrico que se conecte a este producto debe admitir DHCP. Sólo los dispositivos compatibles con el modo Ad-hoc se pueden conectar sin DHCP. 1. Establezca Tipo de red como Inalámbrico. 2. Seleccione Configuración de red inalámbrica. 3. Establezca Conf. prot. Internet como Config. automática. N El protocolo de Internet se configura automáticamente. 4. Seleccione un PA o una red ad-hoc a través de Seleccionar una red. 5. Seleccione Prueba de red para comprobar la conectividad de la red. Configuración red cableada - Config. manual 1. Establezca Tipo de red como Inalámbrico. 2. Seleccione Configuración de red inalámbrica. 3. Establezca Conf. prot. Internet como Configuración manual. 4. Configure la dirección IP, la máscara de subred, la puerta de enlace y el servidor DNS. N Pulse los botones numéricos del mando a distancia para configurar la red manualmente. 5. Seleccione un punto de acceso mediante Seleccionar punto de acceso. 6. Seleccione Prueba de red para comprobar la conectividad de la red. Español - 67 BN68-02269A_SPA.indd 67 2009-03-31 오후 12:59:27 Internet@TV Se pueden utilizar diferentes servicios de Internet que contengan información útil y contenidos de entretenimiento. Si tiene problemas cuando utiliza algún servicio widget, póngase en contacto con el proveedor del servicio. En el widget, pulse el botón verde para obtener información de contacto o consulte la página web de ayuda para obtener información del widget. N Según la región puede que en el servicio del widget sólo se admita el inglés. N Es posible que esta función no se admita, según el país. Todo contenido y los servicios accesibles a través de este aparato pertenecen a terceras personas y están protegidos por las leyes de derechos de autor, patentes, marcas comerciales y/o otras leyes de propiedad intelectual. Todos los servicios son exclusivamente provistos para uso no comercial. Estos servicios o contenidos no podrán ser utilizados de forma no autorizada. Sin limitar o modificar todo lo antes expuesto, modificar, copiar, reproducir, subir, fijar, transmitir, traducir, vender, crear servicios o conceptos derivados, explotar, o distibuir el contenido o los servicios expuestos a través de este aparato, está prohido a menos que sea expresamente autorizado por el propietario de dichos contenidos o por el proveedor de dichos servicios. USTED DEBE RECONOCER Y ACCEDER A USAR ESTE APARATO BAJO SU PROPIO RIESGO ADEMAS DE ASUMIR TODOS LOS RIESGOS EN CUANTO A CALIDAD SATISFACTORIA, DESEMPEÑO Y PRECISIÓN. EL APARATO Y TODO EL CONTENIDO Y SERVICIOS DE TERCERAS PERSONAS SON PROVISTOS “TAL CUAL” ES DECIR, EN LAS CONDICIONES EN QUE SE ENCUENTREN Y SIN NINGUN TIPO DE GARANTÍA, SEA EXPRESA O IMPLÍCITA. SAMSUNG EXPRESAMENTE RENUNCIA A TODA GARANTÍA Y CONDICIÓN DEL APARATO Y A CUALQUIER CONTENIDO Y SERVICIO, SEA EXPRESO O IMPLÍCITO, SIN LIMITAR, GARANTÍAS DE MERCANTILIDAD, DE CALIDAD SATISFACTORIA, DE USO ESPECÍFICO, DE PRECISIÓN, DE SATISFACCIÓN PERSONAL, Y DE LA NO VIOLACIÓN DE DERECHOS DE TERCERAS PERSONAS. SAMSUNG NO GARANTIZA LA PRECISIÓN, VALIDEZ, PUNTUALIDAD, LEGALIDAD, O DE TOTALIDAD DE CUALQUIER CONTENIDO O SERVICIO DISPONIBLE A TRAVÉS DE ESTE APARATO Y TAMPOCO GARANTIZA QUE EL APARATO, CONTENIDO O SERVICIO SATISFACERÁ SUS REQUERIMIENTOS, O QUE EL FUNCIONAMIENTO DEL APARATO O SERVICIO SERÁ ININTERRUMPIDO O LIBRE DE ERRORES. BAJO NIGUNA CIRCUNSTANCIA, INCLUYENDO NEGLIGENCIA, SAMSUNG SERA RESPONSIBLE, SEA BAJO CONTRATO O EXTRACONTRACTUALMENTE, POR ALGÚN DAÑO DIRECTO, INDIRECTO, INCIDENTAL, ESPECIAL O CONSIGUIENTE, HONORARIOS DE ABOGADO, GASTOS, O CUALQUIER OTRO DAÑO QUE SURJA DE, O EN CONEXIÓN CON, CUALQUIER INFORMACIÓN CONTENIDA EN, O COMO RESULTADO DEL USO DE ESTE APARATO, O CUALQUIER CONTENIDO O SERVICIO ACCESADO POR USTED O CUALQUIER TERCERA PERSONA, AUNQUE HAYA SIDO ADVERTIDO DE LA POSIBILIDAD DE AQUELLOS DAÑOS. Servicios de terceras personas pueden ser cambiados, suspendidos, removidos, terminados o interrumpidos, o su acceso puede ser deshabilitado en cualquier momento, sin advertecias. Samsung no hace ninguna representación o garantia de que cualquier contenido o servicio continuará disponible por algun periodo de tiempo determinado. El contenido y los servicios son transmitidos por terceras personas a través de redes e instalaciones de transmisión sobre las cuales Samsung no tiene ningún control. Sin limitar la generalidad de esta Exención de Responsabilidad, Samsung expresamente renuncia a cualquier tipo de responsabilidad por algún cambio, interrumpción, deshabilitación, eliminación o suspensión de cualquier contenido o servicios disponibles a través de este aparato. Samsung puede imponer limitaciones en el uso o acceso a ciertos servicios o contenidos, en cualquier momento y sin ninguna advertencia o responsabilidad. Samsung no es responsable por servicios al cliente relacionados al contenido y servicios. Cualquier pregunta o solicitud sobre los servicios o contenido debe ser dirigida directamente a los respetivos proveedores de los mismos. Español - 68 BN68-02269A_SPA.indd 68 2009-03-31 오후 12:59:27 Primeros pasos con Internet@TV Internet@TV proporciona servicios widgets de Yahoo a través de una conexión de red. Puede acceder a diversa información como el tiempo en el mundo, noticias financieras y las últimas noticias mediante el servicio Internet@TV. N Puede que sufra un funcionamiento lento o titubeante cuando use esta función debido a las condiciones de la red. Cuando se ejecuta Internet@TV por primera vez, la configuración básica se inicia automáticamente. N El primer paso es configurar la red. Para obtener más información sobre cómo configurar la red, consulte ‘Configuración de la red’. N Una vez que la red esté operativa, el software Internet@TV le guiará paso a paso con el asistente de configuración. ❑ ¿Qué es un widget? Un widget de televisión es una pequeña aplicación web que permite acceder fácilmente a los sitios favoritos con el mando a distancia. En el televisor podrá disfrutar de varios tipos de información, como las últimas noticias, la información meteorológica y bursátil, etc., junto con amigos o familiares. N Es posible que algunos widgets no se admitan, según las regulaciones del país correspondiente. N Algunos widgets sólo admitirán servicios limitados, según las regulaciones del país correspondiente. N Los botones de colores pueden funcionar de forma diferente, según el widget. N Es posible que el funcionamiento no sea el correcto, según el estado de la red. N El extracto es un símbolo del widget. ❑ ¿Qué es un extracto? Un extracto muestra una parte del contenido de un widget, como información financiera o meteorológica, que el usuario desea ver. N Los extractos se actualizan automáticamente en tiempo real. N Puede que se tarde unos segundos en cargar el extracto. 1. Pulse el botón MENU. Pulse el botón ▲ o ▼ para seleccionar la aplicación y, a continuación, pulse el botón ENTERE. 2. Pulse el botón ▲ o ▼ para seleccionar Internet@TV y, a continuación, pulse el botón ENTERE. N INTERNET@TV. O Pulse el botón Internet@ del mando a distancia para que se muestre el menú INTERNET@TV. 3. Se muestra el Descargo respons. gral en la pantalla. Seleccione Acepto o No acepto. N Para obtener más información sobre el Descargo respons. gral, consulte ¡Bienvenido a Yahoo!® TV Widgets! Capítulo Configuración de la red.. Con Yahoo! TV Widgets tendrás lo mejor de Internet en tu televisor. Podrás conocer las condiciones meteorológicas o los últimos resultados deportivos, recibir información actualizada sobre valores bursátiles e incluso ver fotografías y vídeos a pantalla completa. ¡Sólo tienes que hacer un par de ajustes y listo! 4. La pantalla de bienvenida es el punto de inicio de la guía de configuración de Internet@TV. N Si selecciona Exit Setup, se reanudará este paso cuando pulse el botón INTERNET@. N Seleccione Let’s get started! 5. La elección de la ubicación permite utilizar contenido localizado en los widgets de TV. N Seleccione su país en la lista. ¡Manos a la obra! Salir 6. Se debe aceptar la política de privacidad de Yahoo!® TV Widget Engine para utilizar Internet@TV. N Seleccione OK, I Accept. 7. Se debe aceptar los términos del servicio de Yahoo!® TV Widget Engine para utilizar Internet@TV. N Seleccione OK, I Accept. 8. Escriba su nombre para configurar su perfil.” Cada perfil tiene su propia lista de widgets. Puede crear un perfil para cada persona que utilice Internet@TV. N Escriba su nombre y seleccione Save this name. N Para obtener más información, consulte ‘Uso del widget de un perfil’. 9. Internet@TV comprueba la configuración de la red. N Si la prueba falla, vuelva a configurar la red. N Para obtener más información, consulte ‘Configuración de la red’. ¿Cómo te llamas? a b j c d e f g h p q i k l m n o s t u v w x y z 0 1 2 3 4 5 6 7 8 9 .@# Guardar áëí r Each person in the house who uses the TV can have their own personalized set of widgets. We’ll keep track of these individual widget profiles by the name you enter, Enter the name YOU want to use now. space Omitie este paso Salir 10.Se completa la configuración guiada. El siguiente paso es un tutorial para utilizar Internet@TV. N El siguiente paso es un tutorial para utilizar Internet@TV. N Seleccione Exit setup si desea empezar a usar Internet@TV ahora. N Para volver a ejecutar el tutorial, seleccione Profile Widget → System Setting → Repetir tutorial. 11. Pulse el botón Internet@ del mando a distancia para que se muestre la interfaz del usuario de Internet@TV. Español - 69 ¡Hola! John! 12:32 AM Thu January 1st Visor BN68-02269A_SPA.indd 69 2009-03-31 오후 12:59:28 ❑ Pantalla de visualización Dock mode 1 Se muestra una pancarta de bienvenida con el nombre del usuario en la esquina superior derecha. N Tras unos momentos desaparece la pancarta. 2 La pancarta resalta dos accesos directos del mando a distancia. N Si pulsa el botón azul (Viewport) del mando a distancia, la pantalla cambia entre ‘Viewport mode’ y ‘Overlay mode’. En el modo Viewport, la televisión o el vídeo se reproduce en una área a escala reducida con gráficos en el exterior. En el modo Overlay, los gráficos se muestran sobre la televisión o el vídeo. N Si pulsa el botón amarillo (Edit Snippet) del mando a distancia, se muestra una ventana de ayuda y el extracto resaltado se edita. ¡Hola! John! 12:32 AM Thu January 1st Visor Usuario John 3 Pulse el botón INTERNET@ del mando a distancia para comenzar. N La lista horizontal en la parte inferior de la pantalla del televisor se denomina ‘el acoplamiento’. N Los elementos de la lista se denominan ‘extractos’. N Un extracto es un acceso directo que ejecuta N un widget de TV. N Un widget de TV es una aplicación de Internet diseñada para ejecutarse en el televisor. N Con los botones ◄ o ► del mando a distancia puede desplazarse por los extractos. N El enfoque se localiza en el área más a la izquierda (resaltado en azul). N El acoplamiento desliza los extractos debajo de este punto focal. N Ejecute el widget de TV pulsando el botón ENTERE del mando a distancia cuando se resalta el extracto. N Cuando se añaden extractos éstos forman una pila por la que es posible desplazarse con los botones ▲ o ▼. N En el acoplamiento hay dos widgets de TV especiales : el Profile Widget y el Gallery Widget.. No se pueden eliminar. N El acoplamiento se desliza fuera de la pantalla tras un periodo de tiempo. Modo Sidebar 1 Enfoque un extracto y pulse el botón ENTERE para ejecutar la barra lateral del widget de TV. El logotipo del widget de TV y de inicio ( ) están en la parte superior de la barra lateral. 2 El menú actual se muestra debajo del logotipo del widget de TV. N Para volver la pantalla anterior, selecciónela y pulse el botón ENTERE. N También puede pulsar el botón RETURN del mando a distancia. 3 La selección actual siempre está resaltada en azul. El botón resaltado tiene el enfoque y se activa cuando se pulsa el botón ENTERE. 4 Si hay muchos datos se utiliza un control de página. N Se muestran todas las páginas junto con la actual. N Desplácese entre las páginas con los botones ◄ o ►. 5 La barra de herramientas inferior incluye los botones de colores que se corresponden con los botones rojo, verde, amarillo y azul del mando a distancia. • Botón rojo: Cerrar el widget. • Botón verde: Cambiar la configuración del widget. • Botón amarillo: Administrar los extractos. • Botón azul: Cambiar el tamaño del vídeo para ajustarlo o mostrarlo a pantalla completa. N Según el widget algunos botones pueden no estar disponibles. Español - 70 BN68-02269A_SPA.indd 70 2009-03-31 오후 12:59:29 Edición del extracto en el acoplamiento 1. Para editar un extracto, selecciónelo en el acoplamiento y pulse el botón amarillo. 2. El extracto se desplaza a la segunda posición y su miniatura se desliza hacia arriba para mostrar el texto de ayuda siguiente : • Borrar (botón rojo): Eliminar este widget de TV. N Los widgets eliminados se pueden volver a instalar con la Widget Gallery.. • Mover (botón azul): Reordenar el extracto. Pulse los botones ◄ o ► para desplazar. Pulse el botón amarillo para soltar el extracto en una nueva posición. • Finalizar (botón amarillo): Salir del menú Edit Snippet. Uso del widget de un perfil El widget de un perfil configura el perfil del usuario. Se pueden establecer varios perfiles y cada uno mantiene su propia lista de widgets. El menú Cambiar de perfil permite cambiar de perfil. N Al menos se deben registrar dos perfiles.Si desea añadir un perfil, consulte ‘Controles administrativos’. Usuario Cambiar de perfil Configuración de perfiles Configuración del sistema Controles administrativos Cerrar sesión en Yahoo! El menú Configuración de perfiles permite personalizar y proteger un perfil personal. • Los perfiles de usuario se deben personalizar con un Nombre y un Avatar exclusivos (un avatar es una imagen que se utiliza para representar el perfil del usuario). • El Nombre y el Avatar del perfil se muestran en el extracto del perfil en el acoplamiento. • Los perfiles se pueden proteger con Crear PIN del perfil. N Cuando se configura el PIN por primera vez, se puede establecer una Pregunta de seguridad. Configuración de perfiles Nombre Crear PIN del perfil Pregunta de seguridad El menú Configuración de perfiles del perfil limita el acceso a los widgets. • Si se olvida el PIN del perfil se puede contestar a una Pregunta de seguridad que está asociada con dicho perfil. • Un perfil que tiene el indicador de Limitar perfil activado no permitirá que se instalen nuevo widgets. N Para esta función se debe utilizar el PIN propietario. Para establecer el PIN propietario, consulte ‘Controles administrativos’. Respuesta de seguridad Limitar perfil Apagado Completado Cancelar Español - 71 BN68-02269A_SPA.indd 71 2009-03-31 오후 12:59:29 Configuración del sistema Ubicación Repetir tutorial Restaurar configuración de fábrica El menú Configuración del sistema permite: • Cambiar Ubicación y establecer Código postal (sólo Estados Unidos) para que se ajuste al contenido de la zona del usuario. • Repetir tutorial que se ha mostrado durante la configuración guiada. • Restaurar configuración de fábrica para eliminar la configuración y la información de los widgets. En el menú Controles administrativos se puede: • • • • Establecer la temporización del Protector de pantalla para prevenir daños en la pantalla. Crear PIN del dueño y establecer una Pregunta de seguridad para controlar otros perfiles. Create un nuevo Profile con el que se pueden configurar un conjunto diferentes de widgets. Borrar un perfil existente. Desde el widget del perfil se puede Iniciar sesión en Yahoo!® mediante el ID de Yahoo! Si dispone de un ID de Yahoo!, • Puede acceder a contenido personalizado mediante los widgets de Yahoo!® TV. • Todos los widgets de Yahoo!® TV que están instalados se registran automáticamente con el perfil del usuario del ID de Yahoo! • Si no tiene una cuenta Yahoo!, visite www.yahoo.com y créela. • Es posible que no pueda iniciar la sesión con un ID creado en el sitio web de Yahoo en un país que no admita Internet@TV. Controles administrativos Protector de pantalla 10 Minutos Crear PIN del dueño Crear PIN del perfil Eliminar perfil Inicia sesión para acceder a tu información de Yahoo! para los dispositivos de Yahoo! en este perfil. Usa el dispositivo de Perfil ara cerrar la sesión. ❑ Acerca del widget del perfil Pulse el botón verde. Puede ver una breve descripción de Profile Widget, Copyright Policy, Terms of Service y Privacy Policy. Español - 72 BN68-02269A_SPA.indd 72 2009-03-31 오후 12:59:30 Uso de la galería de widgets de Yahoo!® Utilice la galería de widgets de Yahoo!® para añadir más widgets a su televisor. Puede ver los widgets de TV disponibles en las siguientes categorías: Últimos Widgets: Muestra los widgets recientemente actualizados. Yahoo!® Widgets: Muestra los widgets proporcionados por Yahoo!®. Widgets de Samsung: Muestra los widgets proporcionados por Samsung. More Categorías: Muestra todos los widgets por categorías. N Para instalar un widget, acceda a la pantalla de detalles, seleccione Añadir dispositivo a mi perfil y pulse el botón ENTERE. Se instala el widget y queda disponible en el acoplamiento. • • • • Widget Gallery Yahoo! News by Yahoo! v0.9.0 NEWS HEADLINES PAGE 1 OF 2 Top Stories Business Potics Sports Technology More Categories NEWS ○○○○● Latest Widgets Yahoo! Widgets Samsung Widgets Categories Widget Gallery Settings ❑ Configuración de Widget Gallery Pulse el botón verde. Pulse el botón verde! Widget Gallery Puede ver una breve descripción de Widget Gallery, Política de copyright, Condiciones del servicio y Política de privacidad. En el menú Configuración de desarrolladores se puede construir su propio widget. Para obtener más información sobre cómo construir un widget propio, visite nuestra sitio web del desarrollador http://connectedtv.yahoo.com/. About Yahoo! Widget Gallery... Developer Settings Español - 73 BN68-02269A_SPA.indd 73 2009-03-31 오후 12:59:30 Uso del servicio meteorológico de Yahoo!® El servicio meteorológico de Yahoo!® Weather Widget proporciona actualizaciones de la información meteorológica de las ciudades y regiones que se desee. El contenido cambia dinámicamente al mismo tiempo que las condiciones climáticas. • Pulse el botón verde del mando a distancia para mostrar el menú Configuración del servicio meteorológico de Yahoo!®. • En el menú Configuración puede añadir o eliminar una ciudad cuya información meteorológica desee ver. EL TLEMPO Sunnyvale Cloudy NEWS HEADLINES Sunnyvale, CA En el menú Configuración puede: • Añadir nueva ciudad escribiendo el nombre de ésta. Cuando se muestren los resultados, seleccione la ciudad que desee y pulse el botón ENTERE. • Borrar ciudad seleccionando la ciudad que desee borrar de la lista de ciudades. Pulse el botón ENTERE para confirmar la supresión. • Cambio del método de indicación de la temperatura Puede cambiar el método de indicación de la temperatura a Imperial o Metric. Por ejemplo, Sistema imperial mostrará temperaturas en grados Fahrenheit y Sistema métrico en grados Celsius. San Francisco, CA New York, NY London, England Paris, France ❑ Creación del extracto de una ciudad • Seleccione la ciudad en la página de inicio del servicio meteorológico de Yahoo!® y vea la información meteorológica detallada. • Pulse el botón amarillo. • Seleccione el menú Añadir fragmento y pulse el botón ENTERE para añadir la ciudad como un extracto. ❑ Supresión del extracto de una ciudad • Ejecute el extracto. • Pulse el botón amarillo. • Seleccione el menú Borrar fragmento y pulse ENTERE para eliminar el extracto. Uso del servicio de noticias de Yahoo!® El servicio Noticias de Yahoo!® proporciona las últimas noticias económicas, de entretenimiento, políticas, deportivas, actualidad y otras categorías. Seleccione una categoría, seleccione un titular en la categoría y vea un resumen que se actualiza dinámicamente. Español - 74 BN68-02269A_SPA.indd 74 2009-03-31 오후 12:59:30 Uso del servicio Flickr de Yahoo!® El servicio Flickr permite acceder a las fotos favoritas de amigos y familiares mientras se ve la televisión. Comparta sus fotos con su familia en la pantalla grande del televisor viéndolas en forma de presentación. • Personalice el widget Flickr registrándose con su ID de Yahoo! • Con el fin de conocer el procedimiento detallado para el inicio de sesión, consulte las instrucciones ‘Uso del widget de un perfil’. • Para obtener más información sobre Flickr, visite http://www.flickr.com. N Tus fotos muestra las fotos registradas en la página web de Flickr. Tus fotos Tus álbumes Explorar Fotos favoritas Tus contactos Tus grupos Para ver fotos de Flickr en una presentación • Seleccione una miniatura de una foto y pulse el botónENTERE para ver los detalles de la foto. • Seleccione Iniciar presentación y pulse el botón ENTERE. Para controlar la pantalla de la presentación: • Pulse el botón ENTERE durante una presentación. • Las miniaturas de las fotos se muestran en la parte inferior de la pantalla. N Cuando se muestran los controles de la presentación, se puede Pause, Play y Stop la presentación. N Si selecciona el menú y pulsa ENTERE, puede ver información sobre la foto seleccionada. • El menú Tus álbumes permite ver las fotos que haya clasificado en Flickr. • El menú Explorar permite examinar las fotos de la página web de Flickr. Puede ver la fotos actualizadas diariamente. • Los menús Marcar como favorita o Eliminar de favoritas mueven las fotos a las listas de las fotos favoritas o las eliminan de las listas. • El menú Fotos favoritas permite ver las fotos que haya clasificado como favoritas. • El menú Tus contactos permite ver las fotos actualizadas de sus amigos y familiares. El menú Tus grupos permite seleccionar los grupos de favoritos de la página web de Flickr para compartirlos con la comunidad de usuarios de Flickr. Para configurar el servicio Flickr de Yahoo!® pulse el botón verde del mando a distancia. • El menú Tiempo por diapositiva controla la velocidad de la presentación. • El menú Repetir reinicia la presentación desde el principio después de presentar la última foto. Español - 75 BN68-02269A_SPA.indd 75 2009-03-31 오후 12:59:30 Uso del servicio de finanzas de Yahoo!® Vea información bursátil y los últimos valores de la acciones con el servicio de finanzas de Yahoo!®. Pulse el botón verde para configurar su mercado bursátil. Utilice el menú Añadir símbolo nuevo para escribir el nombre de un nuevo mercado bursátil. • Seleccione el mercado que desee añadir en los resultados encontrados, seleccione el menú Añadir símbolo y pulse el botón ENTERE. N El mercado seleccionado se añade a la lista Mis cotizaciones. Mis cotizaciones Para eliminar un símbolo bursátil, selecciónalo en la siguiente lista. • Utilice el menú Importar símbolos de Yahoo!® para recuperar la cartera de finanzas de Yahoo!®. - El menú Fusionar símbolos agrupa los símbolos del servicio de finanzas de Yahoo!® con los símbolos de la cartera del usuario. - El menú Fusionar símbolos borra los símbolos del servicio de finanzas de Yahoo!® y los reemplaza por los símbolos de la cartera del usuario. PÁGINA 1 DE • Utilice el menú Formato de visualización para cambiar la transición de la fluctuación de los valores bursátiles como Valor o Porcentaje. Añadir símbolo nuevo... • Cree el extracto de un mercado favorito. Importar símbolos de Yahoo!... - Seleccione el símbolo del mercado en la página de inicio del servicio de finanzas de Yahoo!® y Formato de visualización Valor vea la información financiera detallada. Acerca de Yahoo! Finanzas... - Pulse el botón amarillo. - Seleccione el menú Añadir fragmento y pulse el botón ENTERE para añadir el mercado como un extracto. • Borrar un extracto - Ejecute el extracto en el acoplamiento. - Pulse el botón amarillo. - Seleccione el menú Borrar fragmento y pulse ENTERE para eliminar el extracto. Solución de problemas con Internet@TV Problema Posible solución Algunos servicios de widget no • Compruebe con su proveedor del servicio. funcionan. • En el widget, pulse el botón verde para obtener información de contacto o consulte la página web de ayuda para obtener información del widget. • Consulte la página web de la ayuda. Algunos widget sólo están en inglés. ¿Cómo puedo cambiar el idioma? • El idioma del contenido del widget puede ser diferente del idioma de la interfaz del usuario. Esto depende del proveedor del servicio. Con la configuración predeterminada de fábrica restablecida, el servicio del widget de Yahoo! no funciona y se muestra un mensaje de advertencia. He registrado mi cuenta en un widget de Flickr. Pero no puedo ver mis fotos. • Después de restablecer la configuración predeterminada de fábrica, apague y encienda el televisor. A continuación, reinicie Internet@TV. En el widget del perfil, he cambiado la ubicación pero se mantiene la configuración anterior. • Apague y encienda el televisor. A continuación, reinicie • Internet@TV. Ahora, podrá ver los servicios de widgets admitidos en la ubicación cambiada. • Vaya a la página web de Yahoo! y active su cuenta de Flickr en el ID de Yahoo! Español - 76 BN68-02269A_SPA.indd 76 2009-03-31 오후 12:59:31 Página web de ayuda País Página web Canadá (French) www.samsung.com → téléviseurs → [email protected] →Internet@TV→ Canadá (Inglés) www.samsung.com →TV→[email protected]→Internet@TV Mexico (Spanish) www.samsung.com →televisores→[email protected]→Internet@TV→TV USA (English) www.samsung.com →Television→[email protected]→Internet@TV N Los datos de contacto pueden cambiar posteriormente. N Puede haber enlaces diferentes para algunos países. Español - 77 BN68-02269A_SPA.indd 77 2009-03-31 오후 12:59:31 Centro de red doméstica Centro de red domésticas Acerca del Centro de red doméstica El Centro de red doméstica se conecta a los televisores y a los móviles a través de una red. Puede ver en el televisor las llamadas entrantes, el contenido de los mensajes de texto y las planificaciones programadas en el móvil mediante el Centro de red doméstica. Asimismo, puede reproducir el contenido multimedia guardado en los móviles como vídeos, fotos y música importándolos al televisor a través de la red. N ISi el dispositivo admite la función DLNA DMC (Digital Media Controller), la función Centro de red doméstica está disponible. N El teléfono móvil Samsung SCH-i910 admite el Centro de red doméstica. En el futuro se añadirán otros modelos. Es posible que el dispositivo móvil requiera la instalación de software adicional. Para obtener más información, consulte la guía del usuario correspondiente. ❑ Conexión del Centro de red doméstica Para obtener más información sobre cómo configurar la red, consulte ‘Configuración de la red’. Conexión a través de una red Wi-Fi Ad-hoc Panel lateral del TV Teléfonos móviles LAN inalámbrica de Samsung Adapter or 1. Conecte el ‘adaptador de LAN inalámbrica de Samsung’ en el puerto USB1(HDD) o USB2 del televisor. 2. Para obtener más información sobre cómo configurar la red Ad-hoc, consulte ‘Configuración de la red’. N Para obtener información sobre la configuración de la red del móvil, consulte el manual del aparato. 3. Configure la dirección IP, el SSID y la contraseña del móvil y las configuraciones Adhoc del móvil mediante el nombre de red (SSID) y la clave de seguridad (contraseña) que aparecen en el televisor. Conexión a través de un compartidor IP cableado/inalámbrico 1. Conecte el puerto LAN del TV y el compartidor cableado o inalámbrico mediante el cable LAN o conecte los puertos USB1(HDD) o USB2 del televisor y del ‘adaptador de LAN inalámbrica de Samsung’. N Si desea conocer las instrucciones para configurar el compartidor cableado/ inalámbrico y el teléfono móvil, consulte el manual del dispositivo correspondiente. Panel lateral del TV Teléfonos móviles Wire/Wireless IP sharer LAN inalámbrica de Samsung Adapter o Cable LAN Panel lateral del TV Teléfonos móviles Wire/Wireless IP sharer LAN inalámbrica de Samsung Adapter o Cable LAN Español - 78 BN68-02269A_SPA.indd 78 2009-03-31 오후 12:59:34 Configuración del Centro de red doméstica ❑ Mensaje Muestra una lista de teléfonos móviles que se han configurado con este televisor para usar la función de mensajería (llamadas entrantes, contenido de mensajes de texto y planificaciones programadas en el móvil). Permtdo Admite el teléfono móvil. Negado Bloquea el teléfono móvil. Borrar Elimina el teléfono móvil de la lista. N Esta función elimina el nombre de la lista. Si el dispositivo móvil borrado se enciende o intenta conectarse con el televisor, puede que aparezca en la lista. ❑ Multim. Muestra una lista de teléfonos móviles disponible para controlar el contenido multimedia (vídeos, fotos o música) desde el teléfono. N Además del teléfono móvil, se dispone de otros dispositivos móviles que admiten DLNA DMC. Permtdo Admite el teléfono móvil. Centro de red doméstica Mensaje 111-1234-5671 : Permtdo Multim. 111-1234-5672 : Permtdo Config. 111-1234-5673 : Negado 111-1234-5674 : Negado Regresar Exit Centro de red doméstica Mensaje 111-1234-5671 : Permtdo Multim. 111-1234-5672 : Permtdo Config. 111-1234-5673 : Negado 111-1234-5674 : Negado Negado Bloquea el teléfono móvil. Borrar Elimina el teléfono móvil de la lista. N Esta función elimina el nombre correspondiente de la lista. Si el dispositivo móvil borrado se enciende o intenta conectarse con el televisor, puede que aparezca en la lista. Regresar Exit ❑ Config. Mensaje → Encendido / Apagado Puede determinar si usar la función de mensajería (las llamadas entrantes, el contenido de mensajes de texto y las planificaciones programadas en el teléfono móvil). Multim. → Encendido / Apagado Puede seleccionar si usar la función multimedia que reproduce el contenido (vídeos, fotos o música) del teléfono móvil. Centro de red doméstica Mensaje Mensaje : Encendido Multim. Multim. : Encendidon Config. Nombre TV : TV Nombre TV Puede configurar el nombre del televisor para encontrarlo fácilmente en el dispositivo móvil. N Si selecciona Entrada usuario, puede escribir el nombre del televisor mediante el OSK (teclado en pantalla). Regresar Exit Español - 79 BN68-02269A_SPA.indd 79 2009-03-31 오후 12:59:38 Uso de la función de mensajería Mediante esta función puede ver las llamadas entrantes, el contenido de los mensajes de texto y las planificaciones programadas en el teléfono móvil a través de la ventana de alarma mientras mira el televisor. N Para desactivar esta ventana de alarma de Mensaje, configure Mensaje como Apagado en la Configuración del Centro de red doméstica. N La ventana de alarma aparece durante 20 segundos. Si no se pulsa ninguna tecla o si se selecciona Cancelar, aparece hasta tres veces en intervalos de 5 minutos. N Si no se acepta, o bien si no se ha aceptado mientras el mensaje aparecía tres veces, el mensaje se borrará. El mensaje no se elimina del teléfono móvil. N Puede aparecer la ventana de alarma simple mientras se usan algunas aplicaciones como el Reproductor multimedia, la Biblioteca de contenidos, etc. En este caso, para ver el contenido del mensaje, cambie al modo de visualización de televisión. N Si se muestra el mensaje de un teléfono móvil desconocido, seleccione el teléfono móvil en la opción Mensaje del Centro de red doméstica y seleccione Negado para bloquear el teléfono. husband SMS Nuevo mensaje recibido ¿Desea ver los detalles? Cancelar Aceptar Media Play 148.48MB/149.00MB libre USB : USB PHOTO ❑ Visualización de mensajes Si llega un nuevo mensaje de texto (SMS) mientras mira la televisión, aparece la ventana de alarma. Si hace clic en el botón Acept., aparecerá el contenido del mensaje. • Si selecciona el botón OK, aparecerá el contenido del mensaje. • Si selecciona el botón Cancelar, la ventana de alarma aparece hasta tres veces en intervalos de 5 minutos. N Puede configurar las opciones de visualización del contenido de los mensajes de texto (SMS) en el teléfono móvil. Para conocer el procedimiento, consulte el manual del teléfono móvil. N Es posible que algunos caracteres especiales se muestren en blanco o dañados. Photo Music husband Setup Movie USB Dispositivo e Regresar husband Llamada Tiene una llamada Mom 011-298-2030 ❑ Alarma de llamada entrante Si se produce una llamada mientras mira la televisión, aparece la ventana de alarma. • Si selecciona el botón OK, la alarma de llamada entrante se confirma y se cierra la ventana de alarma. • Si selecciona el botón Cancelar, la ventana de alarma aparece hasta tres veces en intervalos de 5 minutos. Aceptar Cancelar husband ❑ Alarma de planificación Evento program. Mientras mira la televisión, aparece la ventana de alarma para mostrar la planificación registrada. • Si selecciona el botón OK, puede ver el contenido de la planificación registrada en el teléfono móvil. • Si selecciona el botón Cancelar, la ventana de alarma aparece hasta tres veces en intervalos de 5 minutos. N Puede configurar las opciones de visualización del contenido de la planificación en el teléfono móvil. Para conocer el procedimiento, consulte el manual del teléfono móvil. N Es posible que algunos caracteres especiales se muestren en blanco o dañados. Tiene una programación ¿Desea ver los detalles? Aceptar Cancelar Español - 80 BN68-02269A_SPA.indd 80 2009-03-31 오후 12:59:38 Uso de la función multimedia Aparece una ventana de alarma para informar al usuario de que el contenido multimedia (vídeos, fotos, música) enviado desde el teléfono móvil aparecerá en el televisor. El contenido se reproduce automáticamente 3 segundos después de que aparezca la ventana de alarma. Multimedia se reproducirá desde “Dispositivo desconocido 13” Si pulsa el botón RETURN o EXIT cuando aparece la ventana de alarma, no se reproduce el Media Contents. N Para desactivar la transmisión del contenido multimedia desde el teléfono móvil, configure Multim. como Apagado en la Configuración del Centro de red doméstica. N Es posible que el contenido no se reproduzca en el televisor, según la resolución y el formato. ❑ Botones de control de la reproducción multimedia Botón ◄/► ENTER RETURN TOOLS Función • Mover el cursor y seleccionar una opción. • While playing a movie file: Skip forwards or backwards through the movie file. • Pulsando el botón ENTERE durante la reproducción se hace una pausa en ésta. • Pulsando el botón ENTERE durante la reproducción se reanuda ésta. Volver al menú anterior. Ejecutar diversas funciones desde los menús de fotos, música y película. INFO Mostrar información del archivo. EXIT Detener el modo Media Play y volver al modo TV. N Los botones ENTERE y ◄/► puede que no funcionen, según el tipo de contenido multimedia. N Mediante el dispositivo de móvil se puede controlar la reproducción de archivos multimedia. Para obtener más información, consulte la guía del usuario correspondiente. Español - 81 BN68-02269A_SPA.indd 81 2009-03-31 오후 12:59:39 Apéndice Resolución de problemas Antes de ponerse en contacto con el servicio posventa de Samsung, realice estas sencillas comprobaciones.Si no puede resolver el problema con las instrucciones que aparecen a continuación, anote el modelo y el número de serie del televisor y póngase en contacto con el distribuidor local. Problema Posible solución Mala calidad de imagen. Intente sintonizar otro canal. Ajuste la antena. Compruebe todas las conexiones de cable. Intente sintonizar otro canal. Ajuste la antena. Intente sintonizar otro canal. Pulse el botón SOURCE. Compruebe que el televisor esté enchufado. Compruebe las conexiones de la antena. Compruebe que el botón MMUTE esté desactivado. Primero, compruebe el volumen de los aparatos conectados al TV (por ejemplo, un receptor digital, DVD, receptor de cable, reproductor de vídeo, etc.). A continuación, ajuste el volumen del TV según sea más conveniente. Compruebe todas las conexiones. Calidad de sonido deficiente. No hay imagen ni sonido. No se percibe ningún sonido, o muy bajo, con el volumen al máximo. Las imágenes de desplazan verticalmente. El TV funciona de forma irregular. El televisor no se enciende El mando a distancia funciona mal Problema en pantalla con la emisión digital. La imagen es demasiado clara o demasiado oscura. La imagen es demasiado grande o demasiado pequeña. La calidad visual de los canales digitales puede variar. Desenchufe el TV durante 30 segundos e inténtelo de nuevo. Compruebe si la toma de pared funciona. Sustituya las pilas del mando a distancia. Limpie el borde superior del mando a distancia (ventana de transmisión). Compruebe los terminales de las pilas. Pulse el botón TV del mando a distancia para ponerlo en el modo TV. Asegúrese de que el mando a distancia tenga pilas. Compruebe que los polos “+” y “-” de las pilas estén correctamente colocados. Compruebe la potencia de la señal digital y la antena de entrada. Ajuste el brillo y el contraste. Realice una sintonización fina. Ajuste los parámetros de tamaño. La calidad visual de los canales digitales puede variar según el método original de producción (analógico o digital). - Si el método de producción original es digital: Calidad visual alta. - Si el método de producción original es analógico: El programa digital mostrado en la pantalla es originalmente un programa analógico que se ha convertido a digital. La calidad visual es de grado SD (definición estándar). La pantalla está en blanco y el En el ordenador, compruebe los cables de señal y de alimentación. indicador de encendido parpadea El televisor está usando su sistema de gestión de energía. constantemente. Mueva el ratón del ordenador o pulse cualquier tecla. En el equipo, compruebe (STB, DVD, etc.); el cable de señal y el de alimentación. El televisor está usando su sistema de gestión de energía. Pulse el botón SOURCE del mando a distancia o del panel. Encienda y apague el televisor. Aunque el subtítulo del televisor El subtítulo HD (Alta definición) que aparece al cambiar de canal o al pulsar el botón INFO del muestre HD (Alta definición), la mando a distancia significa que el canal seleccionado es un canal digital. Si la emisora convierte calidad visual no es satisfactoria. una señal analógica en digital y la transmite, es posible que la calidad visual no sea perfecta. Aparece una imagen distorsionada Si la función Ajustar a pantalla está seleccionada en varios dispositivos externos, puede en la esquina de la pantalla. aparecer una imagen distorsionada en la esquina de la pantalla. Este síntoma se origina en los dispositivos externos, no en el televisor. Se oye un ruido extraño. La causa es un menor funcionamiento del sistema y no se trata de ningún defecto. Hay píxeles visibles en la pantalla. Puede que existan unos cuantos píxeles brillantes u oscuros en la pantalla. Estos píxeles no influirán en el rendimiento del aparato. Se muestra el mensaje “Resets Aparece cuando el botón EXIT se mantiene pulsado durante unos momentos. La all settings to the default values” configuración del producto se reinicia con los valores predeterminados. (“Restablece todos los valores predeterminados”). Español - 82 BN68-02269A_SPA.indd 82 2009-03-31 오후 12:59:39 Preparación antes de instalar el montaje mural Caso A. Instalación del montaje mural SAMSUNG Caso B. Instalación del montaje mural de otra empresa 1. Instale el montaje mural con un par de apriete de 15 kgf cm o menos. Tenga en cuenta que las piezas se pueden dañar si el par de apriete es diferente del especificado. 2.El juego de accesorios incluye soporte y anilla [②] para la instalación en un montaje mural de otra empresa. (Caso B) N Se ha de fijar en el orificio [①] cuando instale el montaje mural en la pared. Cómo montar el soporte base Utilizando los tornillos para asegurar el soporte y el televisor, fije firmemente éste al soporte. (Es posible que el exterior del equipo sea diferente del que se muestra en la imagen.) (PN50B650S1F) Cuando instale el televisor en una pared, fije la tapa (➊) al soporte con dos tornillos. (PN58B650S1F) Advertencia Sujete firmemente el soporte al televisor antes de moverlo, ya que el soporte puede caer y causar lesiones graves. N El televisor lo deben transportar dos o más personas. Nunca deje el televisor en el suelo ya que la pantalla puede sufrir daños. Almacene siempre el televisor en su posición vertical. Español - 83 BN68-02269A_SPA.indd 83 2009-03-31 오후 12:59:40 경고 주의 Fijación del televisor a la pared Tirar del televisor, empujarlo o colgarse de él puede provocar su caída. En especial, procure que los niños no se 경고 cuelguen del televisor ni lo desestabilicen; éste podría caerse sobre ellos y causarles lesiones graves o incluso 주의 la muerte. Siga las precauciones de seguridad del folleto de seguridad incluido con el producto. Para mejorar la Precaución estabilidad instale un dispositivo antivuelco, como se explica a continuación. Componentes Soporte del TV / Tornillo 1 (M4X 16) Para prevenir la caída del televisor 1. Asegure el soporte del televisor apretando los tornillos 1 (M4X 16) en los orifi cios del centro del televisor. N Utilice solo los tornillos suministrados. PN50B650S1F PN58B650S1F 2. Apriete fi rmemente los tornillos en la pared o el mueble donde se instala el televisor. Asegure el soporte al televisor y a los tornillos de la pared o el mueble. N Debe adquirir por separado los tornillos que usará en la pared o el mueble. N Instale el televisor cerca de la pared para evitar que caiga hacia a atrás. N Cuando instale el televisor en la pared, asegure el cable nivelado respecto al suelo o inclinado hacia adelante por motivos de seguridad. N Compruebe regularmente que el cable no se afl oje. N Cuando desee mover el televisor, debe quitar, primero, el cable de conexión. PN50B650S1F Pared Armario PN58B650S1F Pared Armario 3. Compruebe que todas las conexiones estén bien aseguradas. Compruébelas periódicamente para detectar cualquier signo de fatiga o de fallo. Si tiene dudas sobre la seguridad de la instalación, póngase en contacto con un instalador profesional. Español - 84 BN68-02269A_SPA.indd 84 2009-03-31 오후 12:59:43 Especificaciones del equipo de montaje en la pared (VESA) Instale el montaje mural en una pared sólida, perpendicular al suelo. Para colocarlo en otros materiales de construcción, póngase en contacto con el distribuidor más cercano. Si se instala en el techo o en una pared inclinada, puede caerse y causar graves lesiones personales. Familia de producto Pulgadas Especificaciones VESA (A * B) 19" ~22" 100 * 100 23"~29" 200 * 100 30"~40" 200 * 200 46"~55" 400 * 400 57"~70" 800 * 400 80" ~ 1400 * 800 42"~ 50" 400 * 400 58"~ 63" 600 * 400 70" ~ 800 * 400 80" ~ 1400 * 800 Tornillo estándar Cantidad M4 M6 LCD-TV 4 PDP-TV M8 M8 4 N Se ofrecen las dimensiones estándar para los equipos de montaje mural, como se muestra en la tabla. N Al adquirir el equipo de montaje mural, se proporciona un manual de instalación detallado y todas las piezas necesarias para el montaje. N No use tornillos con un tamaño superior al estándar, ya que pueden causar daños en el interior del televisor. N Para montajes murales que no cumplen las especificaciones de tornillos estándar VESA, la longitud de éstos puede variar dependiendo de las especificaciones. N No use tornillos que no cumplan las especificaciones de tornillos estándar VESA. N No apriete excesivamente los tornillos, ya que podría dañar el producto o provocar la caída de éste con riesgo de causar lesiones personales. Samsung no se hace responsable de este tipo de accidentes. N Samsung no se hace responsable de daños o lesiones personales cuando se usa un montaje mural que no es VESA o que no cumple las especificaciones, o si el cliente no sigue las instrucciones de instalación del producto. N Nuestros modelos de 57” y 63” no son compatibles con las especificaciones VESA. Por ello, debe usar un equipo de montaje mural exclusivo para este modelo. N No supere los 15 grados de inclinación cuando monte este televisor. No instale el equipo de montaje mural mientras el televisor está encendido. Se podría producir una descarga eléctrica con riesgo de causar lesiones personales. Español - 85 BN68-02269A_SPA.indd 85 2009-03-31 오후 12:59:44 Especificaciones Nombre del modelo Tamaño de pantalla (diagonal) Resolución de PC Sonido (salida) PN50B650S1F PN58B650S1F 50 pulgadas (49,9 pulgadas medidas diagonalmente) 58 pulgadas (58 pulgadas medidas diagonalmente) 1920 x 1080 a 60 Hz 1920 x 1080 a 60 Hz 10 W x 2 15 W x 2 48,5 x 29,8 x 2,9 pulgadas (1231 x 756 x 74 mm) 48,8 x 32,4 x 11,4 pulgadas (1240 x 822 x 290 mm) 55,2 x 33,4 x 2,9 pulgadas (1401,3 x 847.9 x 74 mm) 55,2 x 36,1 x 13,2 pulgadas (1401,3 x 916.5 x 335 mm) 73,2 lbs (33,2 kg) 84,2 lbs (38,2 kg) 85,7 lbs (38,9 kg) 100,9 lbs (45,8 kg) Entre 50 °F y 104 °F (10 °C y 40 °C) 10% al 80%, sin condensación Entre -4 °F y 113 °F (-20 °C y 45 °C) 5% al 95%, sin condensación Entre 50 °F y 104 °F (10 °C y 40 °C) 10% al 80%, sin condensación Entre -4 °F y 113 °F (-20 °C y 45 °C) 5% al 95%, sin condensación Dimensiones (An. x Al. x Pr.) Cuerpo principal Con el soporte Peso Cuerpo principal Con el soporte Consideraciones medioambientales Temperatura de funcionamiento Humedad de funcionamiento Temperatura de almacenamiento Humedad de almacenamiento N Este dispositivo es un aparato digital de la Clase B. N El diseño y las especificaciones pueden cambiar sin previo aviso. N Para conocer la fuente de alimentación y el consumo de energía, consulte la etiqueta adherida al producto. Español - 86 BN68-02269A_SPA.indd 86 2009-03-31 오후 12:59:44 Dimensiones (PN50B650S1F) VISTA SUPERIOR VISTA FRONTAL DETALLE DEL PANEL DE TERMINALES VISTA LATERAL VISTA POSTERIOR NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2009 Samsung Electronics America, Inc. Español - 87 BN68-02269A_SPA.indd 87 2009-03-31 오후 12:59:45 Dimensiones (PN58B650S1F) VISTA SUPERIOR VISTA FRONTAL DETALLE DEL PANEL DE TERMINALES VISTA LATERAL VISTA POSTERIOR NOTE: All drawings not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to dimensions on each unit prior to performing any carpentry. Not responsible for typographical or printed errors. © 2009 Samsung Electronics America, Inc. Español - 88 BN68-02269A_SPA.indd 88 2009-03-31 오후 12:59:46
advertisement