Samsung 360W 5.1Ch Panoramic Soundbar HW-N650 Quick start guide
Add to My manuals31 Pages
Samsung HW-N650: Elevate your home audio experience with this feature-rich soundbar. Enjoy immersive, room-filling sound with crystal-clear dialogue and powerful bass, thanks to the included subwoofer. Connect your TV via HDMI or optical cable for seamless audio transmission and control the soundbar's volume directly with your TV remote. Stream music wirelessly from your smart devices via Bluetooth or plug in a USB drive to play your favorite tunes. The sleek design of the soundbar complements any home décor, whether wall-mounted or placed on a TV stand.
advertisement
▼
Scroll to page 2
of
31
USER MANUAL HW-N650 SAFETY INFORMATION SAFETY WARNINGS WARNING •• To reduce the risk of fire or electric shock, do TO REDUCE THE RISK OF ELECTRIC SHOCK, DO not expose this appliance to rain or moisture. NOT REMOVE THE COVER (OR BACK). CAUTION NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE •• TO PREVENT ELECTRIC SHOCK, MATCH WIDE PERSONNEL. BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. •• This apparatus shall always be connected to a CAUTION AC outlet with a protective grounding RISK OF ELECTRIC SHOCK. DO NOT OPEN. connection. •• To disconnect the apparatus from the mains, This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. This symbol indicates that this product has included important literature concerning operation and maintenance. Class II product : This symbol indicates •• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the apparatus. •• To turn this apparatus off completely, you must pull the power plug out of the wall that it does not require a safety connection to electrical earth (ground). AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC voltage. DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage. Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for further safety related information. ENG - ii socket. Consequently, the power plug must be easily and readily accessible at all times. PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire. Do not short circuit, sticker located on the bottom of your disassemble, or overheat the battery. product. Install your product horizontally, on Danger of explosion if the battery is replaced a suitable base (furniture), with enough incorrectly. Replace only with the same or space around it for ventilation (7~10 cm). equivalent type. Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. ABOUT THIS MANUAL This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug The user manual has two parts: this simple paper from the wall outlet. Unplug the unit if you USER MANUAL and a detailed FULL MANUAL you intend to leave it unused for a long period of can download. time. 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. 3. Do not expose the unit to direct sunlight or USER MANUAL other heat sources. This could lead to See this manual for safety instructions, overheating and cause the unit to product installation, components, malfunction. connections, and product specifications. 4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation FULL MANUAL may occur if your product has been stored in You can access the FULL MANUAL on cold temperatures. If transporting the unit Samsung’s on-line customer support centre by during the winter, wait approximately scanning the QR code. To see the manual on 2 hours until the unit has reached room your PC or mobile device, download the temperature before using. manual in document format from Samsung’s website. (http://www.samsung.com/support) Design and specifications are subject to change without prior notice. ENG - iii CONTENTS 01 Checking the Components 2 Inserting Batteries before using the Remote Control (AA batteries X 2) -------------------------- 2 02 03 04 05 06 Product Overview 3 Front Panel / Right Side Panel of the Soundbar -------------------------- 3 Bottom Panel of the Soundbar -------------------------- 3 Connecting the Soundbar 4 Connecting Electrical Power -------------------------- 4 Connecting the Soundbar to the Subwoofer –– Automatic connection between the Subwoofer and the Soundbar –– Manually connecting the Subwoofer if automatic connection fails -------------------------- 5 -------------------------- 5 -------------------------- 6 Connecting the SWA-8500S to a Soundbar (Sold Separately) -------------------------- 7 Connecting to your TV 9 Method 1. Connecting with a Cable –– Connecting a TV using an HDMI Cable –– Connecting using an Optical Cable -------------------------- 9 -------------------------- 9 -------------------------- 10 Method 2. Connecting Wirelessly –– Connecting a TV via Bluetooth -------------------------- 11 -------------------------- 11 Connecting an External Device 13 Connecting using an HDMI Cable -------------------------- 13 Connecting using an Optical or Analogue Audio (AUX) Cable -------------------------- 14 Connecting a USB Storage Device Software Update 15 -------------------------- 15 ENG - iv 07 Connecting a Mobile Device Connecting via Bluetooth 08 09 16 -------------------------- 16 Using the Remote Control 17 How to Use the Remote Control -------------------------- 17 Adjusting the Soundbar volume with a TV remote control -------------------------- 20 Installing the Wall Mount 21 Installation Precautions -------------------------- 21 Wallmount Components -------------------------- 21 10Troubleshooting 24 11Licence 25 12 Open Source Licence Notice 25 13 Important Notes About Service 25 14 Specifications and Guide 26 Specifications -------------------------- 26 ENG - v 01 CHECKING THE COMPONENTS PAIR SOUND MODE VOL WOOFER SOUNDBAR Soundbar Main Unit 1 Power Cord (Subwoofer) 2 Subwoofer Remote Control / Batteries 3 AC/DC Adapter (Main Unit) Power Cord (AC/DC Adapter) HDMI Cable Micro USB to USB adapter Cable (Optionally) •• For more information about the power supply and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) •• The power components are labelled (1, 2, 3). For more information about power connections, see page 4. •• For Soundbar wall mounting components, see page 21. •• To purchase additional components or optional cables, contact a Samsung Service Centre or Samsung Customer Care. Inserting Batteries before using the Remote Control (AA batteries X 2) Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position. ENG - 2 02 PRODUCT OVERVIEW Front Panel / Right Side Panel of the Soundbar Right Side of the Soundbar Position the product so Volume that the SAMSUNG logo Power is located on the top. Display Bottom Panel of the Soundbar USB (5V 0.5A) AUX IN DIGITAL AUDIO IN (OPTICAL) HDMI IN HDMI OUT (TV-ARC) DC 24V HDMI IN USB (5V 0.5A) AUX IN DIGITAL AUDIO IN (OPTICAL) Source HDMI OUT (TV-ARC) DC 24V Selects the source input mode. (D.IN / AUX / HDMI / BT / USB) •• To turn on “BT PAIRING” mode, change the source to “BT” mode, and then press and hold the (Source) button for more than 5 seconds. USB Connect a USB device here to play music files on the USB device through the Soundbar. AUX Connect to the Analogue output of an external device. D.IN Connect to the digital (optical) output of an external device. HDMI IN HDMI OUT DC 24V Inputs digital video and audio signals simultaneously using an HDMI cable. Connect to the HDMI output of an external device. Connect to the HDMI (ARC) jack on a TV. Connect the AC/DC power adapter. (Power Supply In) ENG - 3 03 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components (1, 2, 3) to connect the Subwoofer and Soundbar to an electrical outlet in the following order: 1 Connect the power cord to the Subwoofer. 2 Connect the power output cable to the power adapter, and then to the Soundbar. 3 Connect the power cord to a wall socket. See the illustrations below. •• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit) POWER DC 24V 1 Power Cord HDMI IN 3 Power Cord Connecting Electrical Power HDMI OUT (TV-ARC) DC 24V Rear of Subwoofer Bottom of the Connecting Electrical Power 2 AC/DC Adapter Soundbar Main Unit •• Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction. ENG - 4 Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound. Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar. •• When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on. LED Indicator Lights on the Rear of Subwoofer LED Status On Description Successfully connected (normal operation) Resolution Check if the power cable attached to the Blue main Soundbar unit is connected properly Blinking Recovering the connection or wait about 5 minutes. If blinking persists, try manually connecting the subwoofer. See page 6. Red On Standby (with the Soundbar Check if the power cable attached to the main unit turned off) main Soundbar unit is connected properly. Connect again. See the instructions for Connection failed Red and blue Blinking manual connection on page 6. See the contact information for the Malfunction Samsung Service Centre in this manual. ENG - 5 Manually connecting the Subwoofer if automatic connection fails Before performing the manual connection procedure below: •• Check whether the power cables for the Soundbar and subwoofer are connected properly. •• Make sure that the Soundbar is turned on. 1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. •• The red indicator on the rear of the subwoofer turns off and the blue indicator blinks. 5 Sec Rear of Subwoofer 2. Press and hold the Up button on the remote control for at least 5 seconds. •• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. •• The Soundbar will automatically power on when ID SET is complete. PAIR ID SET 5 Sec ND SOUODE M 3. Check if the LINK LED is solid blue (connection complete). The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Subwoofer. Blue is On ENG - 6 Connecting the SWA-8500S to a Soundbar (Sold Separately) Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA‑8500S) to your Soundbar (Sold separately). 1. Connect the Wireless Receiver Module to 2 Surround Speakers. –– The speaker cables are colour coded. L R SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3Ω SURROUND-LEFT SURROUND-RIGHT ID SET L R SURROUND-LEFT SURROUND-RIGHT SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3Ω POWER ID SET 2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. •• The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-8500S user manual. SURROUND SPEAKERS SURROUND OUT SPEAKERS OUT SPEAKER IMPEDANCE SPEAKER : 3Ω IMPEDANCE : 3Ω L R L R 5 Sec SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3Ω SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3Ω ID SET ID SET POWER ID SET STANDBY LINK LINK STANDBY LINK LINK Blue blinking POWER POWER ID SET STANDBY STANDBY POWER ENG - 7 3. Press and hold the Up button on the remote control for at least 5 seconds. •• The ID SET message appears on the display of the Soundbar for a moment, and then it disappears. •• The Soundbar will automatically power on when ID SET is complete. PAIR ID SET 5 Sec ND SOUODE M CAUTION •• If your Soundbar was playing music when it connects to the SWA-8500S, you may hear some stuttering from the woofer as the connection finalises. 4. Check if the LINK LED is solid blue (connection complete). STANDBY STANDBY LINK The LINK LED indicator stops blinking and glows a solid blue when a connection is LINK established between the Soundbar and the Wireless Receiver Module. Blue is On 5. If SWA-8500S is not connected, repeat the procedure from Step 2. ENG - 8 04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections. •• When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TV’s remote control. –– This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable. –– This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute. Method 1. Connecting with a Cable When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may differ depending on the TV manufacturer.) Connecting a TV using an HDMI Cable Connect to the HDMI IN Bottom of the Soundbar (ARC) port of your TV. HDMI IN (ARC) HDMI Cable HDMI IN HDMI OUT (TV-ARC) Connect to the HDMI OUT (TV-ARC) port of the Soundbar main unit. TV ARC DC 24V Right Side of the Soundbar 1. With the Soundbar and TV turned on, connect the HDMI cable as shown in the figure. 2. “TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV sound. •• If TV sound is inaudible, press the (Source) button on the remote control or on the right side of the Soundbar to switch to “D.IN” mode. The screen displays “D.IN” and “TV ARC” in sequence, and TV sound is played. ENG - 9 •• If “TV ARC” does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable is connected to the correct port. •• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar. Connecting using an Optical Cable Bottom of the Soundbar AUX IN OPTICAL OUT DIGITAL AUDIO IN (OPTICAL) Optical Cable (not supplied) D.IN Right Side of the Soundbar 1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable (not supplied). 2. Press the (Source) button on the right side panel or remote control, and then select the “D.IN” mode. Auto Power Link Auto Power Link automatically turns on the Soundbar when the TV is turned on. 1. Connect the Soundbar and a TV with a digital optical cable (not supplied). 2. Press the (Source) button on the right side panel or on the remote control, and then select “D.IN”. 3. Press the Left button on the remote control (the blue spot in the illustration to the right) for 5 seconds to turn Auto Power Link on or off. •• Auto Power Link is set to ON by default. (To turn off this function, hold the Left button on the remote for 5 seconds.) •• Depending on the connected device, Auto Power Link may not function. •• This function is only available in the “D.IN” mode. ENG - 10 Method 2. Connecting Wirelessly Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• Only one TV can be connected at a time. PAIR OR ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the right side panel and then select “BT”. Change “BT” to “BT READY”. b. When “BT READY” appears, press and hold the (Source) button on the right side panel of the Soundbar for more than 5 seconds to display “BT PAIRING”. 2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.) 3. Select “[AV] Samsung Soundbar Nxxx N-Series” from the list on TV’s screen. An available Soundbar is indicated with “Need Pairing” or “Paired” on the TV’s Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection. •• When the TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display. 4. You can now hear TV sound from the Soundbar. If the device fails to connect •• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar Nxxx N-Series”) appears in the list, delete it. •• Then repeat steps 1 through 3. ENG - 11 Disconnecting the Soundbar from the TV Press the (Source) button on the right side panel or on the remote control and switch to any mode but “BT”. •• Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) •• To cancel the automatic Bluetooth connection between the Soundbar and TV, press the p (Play/Pause) button on the remote control for 5 seconds with the Soundbar in “BT READY” status. (Toggle On → Off) What is the difference between BT READY and BT PAIRING? •• BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Soundbar. •• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the on the remote control or press and hold the PAIR button (Source) button on the right side of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.) NOTES •• If asked for a PIN code when connecting a Bluetooth device, enter <0000>. •• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar and the Bluetooth device exceeds 10 meters. •• The Soundbar automatically turns off after 5 minutes in the Ready state. •• The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances: –– If there is a strong electrical field around the Soundbar. –– If several Bluetooth devices are simultaneously paired with the Soundbar. –– If the Bluetooth device is turned off, not in place, or malfunctions. •• Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc. ENG - 12 05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external device’s sound through the Soundbar. Connecting using an HDMI Cable Bottom of the Soundbar HDMI OUT External Device HDMI IN HDMI Cable HDMI OUT (TV-ARC) HDMI IN (ARC) HDMI Cable HDMI Right Side of the Soundbar 1. Connect an HDMI cable from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. 2. Connect an HDMI cable from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI IN jack on your TV. 3. Press the (Source) button on the right side panel or on the remote control, and then select “HDMI”. 4. “HDMI” mode is displayed on the Soundbar display panel and sound plays. ENG - 13 Connecting using an Optical or Analogue Audio (AUX) Cable Right Side of the Soundbar BD / DVD player / Set-top box / Game console R - AUDIO - L USB (5V 0.5A) Audio (AUX) Cable (not supplied) AUX IN DIGITAL AUDIO IN (OPTICAL) OPTICAL OUT Optical Cable Bottom of the Soundbar (not supplied) 1 Audio (AUX) Cable XX Connect AUX IN (Audio) on the main unit to the AUDIO OUT jack of the Source Device using an audio cable. YY Select “AUX” mode by pressing the (Source) button on the right side panel or on the remote control. 2 Optical Cable XX Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT jack of the Source Device using a digital optical cable (not supplied). YY Select “D.IN” mode by pressing the (Source) button on the right side panel or on the remote control. ENG - 14 06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar. USB port Display HDMI IN USB (5V 0.5A) HDMI OUT (TV-ARC) AUX IN DC 24V DIGITAL AUDIO IN (OPTICAL) USB USB (5V 0.5A) Micro USB to USB adapter Cable (Optionally) 1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar. •• The Micro USB to USB adapter cable is sold separately. To purchase, contact a Samsung Service Centre or Samsung Customer Care. 2. Connect your USB device to the female end of the adapter cable. 3. Press the (Source) button on the right side panel or on the remote control, and then select “USB”. 4. “USB” appears in the display screen. 5. Play music files from the USB storage device through the Soundbar. •• The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more than 5 minutes. Software Update Samsung may offer updates for the Soundbar’s system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how to download update files, go to the Samsung Electronics website at www.samsung.comSupport. Then, enter or select the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can vary. ENG - 15 07 CONNECTING A MOBILE DEVICE Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. •• You cannot connect more than one Bluetooth device at a time. PAIR OR Bluetooth device ND SOUODE M The initial connection 1. Press the PAIR button on the remote control to enter the “BT PAIRING” mode. (OR) a. Press the (Source) button on the right side panel and then select “BT”. Change “BT” to “BT READY”. b. When “BT READY” appears, press and hold the (Source) button on the right side panel of the Soundbar for more than 5 seconds to display “BT PAIRING”. 2. On your device, select “[AV] Samsung Soundbar Nxxx N-Series” from the list that appears. •• When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] → “BT” appears in the front display. 3. Play music files from the device connected via Bluetooth through the Soundbar. If the device fails to connect •• If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar Nxxx N-Series”) appears in the list, delete it. •• Then repeat steps 1 through 2. NOTE •• After you have connected the Soundbar to your mobile device the first time, use the “BT READY” mode to reconnect. See Page 12 for details. For more information about Bluetooth connections, refer to “Connecting a TV via Bluetooth” on pages 11~ 12. ENG - 16 08 USING THE REMOTE CONTROL How to Use the Remote Control Turns the Soundbar on and off. Power PAIR Press to select a source connected to the Soundbar. Source Press the (Mute) button to mute the sound. Press it again PAIR to unmute the sound. SOUND MODE SOUND MODE SOUND MODE You can select the desired sound effect by choosing STANDARD, SURROUND, or GAME. •• DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE button while the Soundbar is PAIR PAIR powered off to turn DRC (Dynamic Range Control) VOL WOOFER on or off. With the DRC turned on, loud sound is reduced. (The sound may be WOOFER SOUND MODE distorted.) SOUND MODE VOL PAIR Mute WOOFER SOUNDBAR SOUND MODEVOL •• Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection request from a previously connected TV or Bluetooth device. The setting is On by VOL WOOFER VOL ENG - 17 default. –WOOFER – Press and hold the SOUND MODE button for more than 5 seconds to turn off the Bluetooth Power function. Press the PAIR button. “BT PAIRING” appears in the Soundbar’s display. You can connect the Soundbar to a new Bluetooth device in this mode by selecting the Soundbar from the Bluetooth device's search list. PAIR Bluetooth PAIR SOUND MODE Press the p button to pause a music file temporarily. When you press the button again, the music file plays. Play / Pause VOL WOOFER PAIR Press the indicated areas to select Up/Down/Left/Right. SOUND Up/Down/ MODE PAIR Left/Right SOUND MODE Press Up/Down/Left/Right on the button to select or set functions. •• Repeat To use the Repeat function in “USB” mode, press the Up button. VOL VOL WOOFER WOOFER •• Music Skip Press the Right button to select the next music file. Press the Left button to select the previous music file. •• Anynet+ / Auto Power Link You can turn Anynet+ and Auto Power Link on or off. Anynet+ and Auto Power Link are turned on and turned off by the Right and Left buttons respectively. –– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable, you can control your Soundbar with a Samsung TV remote control. Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF. –– Auto Power Link : If the Soundbar is connected to your TV through a digital optical cable, the Soundbar can automatically turn on when you turn on your TV. Press and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF. –– Anynet+ / Auto Power Link are set to ON by default. •• ID SET Press and hold the Up button for 5 seconds to complete ID SET (when connecting to an accessary item). ENG - 18 You can select from TREBLE, BASS, or AUDIO SYNC. •• To control the volume of the treble or bass sound, select TREBLE or BASS in Sound Settings, and then adjust the volume between -6~+6 by using the Up/Down buttons. •• If the video on the TV and audio from the Soundbar are not synchronised, select AUDIO SYNC in Sound Settings, and then set the audio delay between 0~300 milliseconds by using the Up/Down buttons. (Not available in “USB” mode.) •• AUDIO SYNC is only supported for some functions. PAIR SOUND MODE Sound Control SO M UN OD D E W OO D BA R SO U N VO L D BA R VO L SO U N W OO D BA R SO U N VO L D BA R FE R FE R W OO FE R W OO SOUND MODE SO U N Push the button up or down to adjust the volume of the subwoofer to -12 or between -6 to +6. To set the subwoofer volume level to 0, press the button. SO M UN OD D E ENG - 19 U SO VO L D N U SO VO L •• Mute Press the VOL button to mute the sound. Press it again to unmute the sound. WOOFER W OO W OO BA R W OO BA R D SO U N VO L Push the button up or down to adjust the volume. VOL F FE R FE FE W OO D N U SO VO L R SO M UN OD D E R WOOFER SOUND MODE BA R VOL VOL SO M UN OD D E PAIR SO M UN OD D E VO L SO M UN OD D E SO M UN OD D E PAIR WOOFER WOOFER FE R VOL Adjusting the Soundbar volume with a TV remote control 4. If you want to return the Soundbar to the If you have a Samsung TV, you can adjust the Soundbar’s volume using the IR remote control that came with your Samsung TV. button for 5 seconds repeatedly until default mode (control by a Samsung TV remote), push up and hold the WOOFER “SAMSUNG-TV REMOTE” appears in the display. First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your manual. The default mode for this function is control by a Samsung TV remote. If your TV is not a Samsung TV, follow the directions below to change the settings of this function. 1. Turn Off the Soundbar. BYE 2. If you do not want to use this function, push up and hold the WOOFER button repeatedly for 5 seconds until “OFF-TV REMOTE” appears in the display. OFF-TV REMOTE N D SO U VO L BA R W OO FE R SO M UN OD D E 5 Sec 3. If you want to control the Soundbar with your TV’s remote, push up and hold the WOOFER button for 5 seconds repeatedly until “ALL-TV REMOTE” appears in the display. Then, use your TV’s menu to select external speakers. ALL-TV REMOTE D N SO U VO L BA R W OO FE R SO M UN OD D E 5 Sec SAMSUNG-TV REMOTE D N U VO L BA R W OO (Default mode) SO volume. For more information, see the TV’s user FE R SO M UN OD D E Samsung remote to control the Soundbar’s 5 Sec ENG - 20 –– Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the following order: “SAMSUNG-TV REMOTE” (Default mode) → “OFF‑TV REMOTE” → “ALL‑TV REMOTE”. –– This function may not be available, depending on the remote control. –– For manufacturers that support this feature, refer to the FULL MANUAL for your Soundbar on the Samsung web site (www.samsung.com/support). –– This volume control function works with IR TV remotes only. It does not work with Bluetooth TV remotes (remotes that require pairing) 09 INSTALLING THE WALL MOUNT Wallmount Components Installation Precautions Wall Mount Guide •• Install on a vertical wall only. •• Do not install in a place with high temperature or humidity. •• Verify whether the wall is strong enough to support the product’s weight. If not, reinforce Holder-Screw (2 EA) Screw (2 EA) the wall or choose another installation point. •• Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If Bracket-Wall Mount (2 EA) possible, fix the support screws into wall studs. •• Purchase wall mounting screws according to the type and thickness of the wall you want to 1. Place the Wall Mount Guide against the wall mount the Soundbar on. surface. •• The Wall Mount Guide must be level. –– Diameter: M5 –– Length: 35 mm or longer recommended. •• Connect cables from the unit to external •• If your TV is mounted on the wall, install the Soundbar at least 5 cm below the TV. devices before you install the Soundbar on the wall. •• Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock. ENG - 21 5 cm or more 2. Align the Wall Mount Guide’s Centre Line 5. Push a screw (not supplied) through each with the centre of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape. •• If you are not mounting below a TV, place the Centre Line in the centre of the installation area. 6. Install the 2 Bracket-Wall Mounts in the correct orientation on the bottom of the Soundbar using 2 Screws. Centre Line 3. Push a pen tip or sharpened pencil tip through the centre of the A-TYPE images on each end of the Guide to mark the holes for the supporting screws, and then remove the Wall Mount Guide. •• When assembling, make sure the hanger part of the Bracket-Wall Mounts are located behind the rear of the Soundbar. Rear of Soundbar 4. Using an appropriately sized drill bit, drill a hole in the wall at each marking. •• If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors or mollies into the holes before you insert the support screws. If you use anchors or mollies, make sure the holes you drill are large Right end of Soundbar enough for the anchors or mollies you use. ENG - 22 7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall. 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws. •• Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that Bracket-Wall Mounts rest securely on the Holder-Screws. ENG - 23 10 TROUBLESHOOTING Before seeking assistance, check the following. The unit will not turn on. Is the power cord plugged into the outlet? ;; Connect the power plug to the outlet. A function does not work when the button is pressed. Is there static electricity in the air? ;; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode. ;; See the Bluetooth connection sections on pages 11 and 16. Sound is not produced. Is the Mute function on? ;; Press the VOL button to cancel the function. Is the volume set to minimum? ;; Adjust the Volume. The remote control does not work. Are the batteries drained? ;; Replace with new batteries. Is the distance between the remote control and Soundbar main unit too far? ;; Move the remote control closer to the Soundbar main unit. The red LED on the subwoofer blinks and the subwoofer is not producing sound. This issue can occur if the subwoofer is not connected to the Soundbar main unit. ;; Try to connect your subwoofer again. (See page 5.) The subwoofer drones and vibrates noticeably. Try to adjust the vibration of your subwoofer. ;; Push the WOOFER button on your remote control up or down to adjust the subwoofer volume. (to -12, or between -6 ~ +6). ENG - 24 11 LICENCE 12 OPEN SOURCE LICENCE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. ([email protected]). 13 IMPORTANT NOTES ABOUT SERVICE Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in Figures and illustrations in this User Manual are combination with the Symbol, and DTS Digital provided for reference only and may differ from Surround are registered trademarks or actual product appearance. trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ENG - 25 14 SPECIFICATIONS AND GUIDE Specifications Model Name HW-N650 USB 5V/0.5A Weight 3.6 kg Dimensions(W x H x D) 1100.0 x 59.0 x 100.0 mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % ~ 75 % AMPLIFIER Rated Output power 30W x 6 + 10W x 2 LPCM 2ch, Dolby Audio™ Supported play formats (supporting Dolby® Digital), DTS Subwoofer Name PS-WN30 Weight 7.0 kg Dimensions(W x H x D) 215.0 x 384.5 x 304.0 mm AMPLIFIER Rated Output power 160W NOTES •• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. •• Weight and dimensions are approximate. •• For India Only “This product is RoHS compliant” ENG - 26 © 2018 Samsung Electronics Co., Ltd. All rights reserved. Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Centre. Area Contact Centre Web Site ` Asia Pacific CHINA 400-810-5858 www.samsung.com/cn/support HONG KONG 3698 4698 www.samsung.com/hk/support (Chinese) www.samsung.com/hk_en/support (English) MACAU 0800 333 www.samsung.com/support SINGAPORE 1800 7267864 | 1800-SAMSUNG www.samsung.com/sg/support AUSTRALIA 1300 362 603 www.samsung.com/au/support NEW ZEALAND 0800 726 786 (All Product) 0800 6 726 786 www.samsung.com/nz/support VIETNAM 1800 588 889 www.samsung.com/vn/support THAILAND 0-2689-3232 1800-29-3232 (Toll free) www.samsung.com/th/support MYANMAR +95-1-2399-888 www.samsung.com/mm/support CAMBODIA +855-23-993232 1800-20-3232 (Toll free) www.samsung.com/th/support LAOS +856-214-17333 MALAYSIA 1800-88-9999 +603-7713 7420 (Overseas contact) www.samsung.com/my/support INDONESIA 021-5699-7777 0800-112-8888 (All Product, Toll Free) www.samsung.com/id/support PHILIPPINES 1-800-10-726-7864 [ PLDT Toll Free ] 1-800-8-726-7864 [ Globe Landline and Mobile ] 02-422-2111 [ Standard Landline ] www.samsung.com/ph/support TAIWAN 0800-329-999 www.samsung.com/tw/support INDIA 1800 40 SAMSUNG (1800 40 7267864) (Toll-Free) NEPAL 16600172667 (Toll Free for NTC Only) 9801572667 BANGLADESH 09612300300 08000300300 (Toll free) SRI LANKA +9411SAMSUNG (+94117267864) +94117540540 +94115900000 AH68-03036H-00 www.samsung.com/in/support AH68-03036H-00
advertisement
Key Features
- 2.1 channels
- Bluetooth 2.1+EDR
- Black
Related manuals
advertisement