LG WD-6007C

FULLY AUTOMATIC
WASHING MACHINE
<<<<<
UUUUU
00000
00000
e 0 O NN
ANANA
Dear Customer,
We wish that this product, manufactured at modern facilities with total quality notions, will deliver you the best
performance. In order fo guarantee this, please read this instruction booklet thoroughly
and keep it for your future reference. (de
Tr
A946
Control Panel
Detergent drawer On/off Rinse hold Temperature Program selection
button button adjustment knob knob
@ LG 180 Apu CAD GLEAN MASTER 8
PE Gia Mae -
- = © @ ®
pe
| |
Half load Spin speed
Technical button selection
Features ; 2 3 4 5 button
| À
|
| WD-1008C WD-8007€ WD-6007€
els 4" Eu e а WD-8008C WD-6008€
6 — O De © ©
90 1000 rpm Mr 800 pm “=r 600 rpm
= “lel 500 rpm mal 500 pm "mm! No Spin
WD-6008C
WD-6007C WD-8008C
WD-8007C WD-1008 C
7 Capacity (dry fabric) (kg.] 5.0 4.5
Height (cm.) 85 85
Width (cm.) 60 60
Depth (cm.) 54 45
Net weight (kg.) 60 57
y Power requirement 220-230 V,50 Hz.
o |” | Nominal current (A) 10
a 10 Motor power (W) 300
Heater power (W) 1900
Washing speed (rpm) 50
8 Spin speed (rpm) 600 (WD-6007C) 600 (WD-6008C}
? 19 D 800 (WD-8007C) 800 (WD-8008C]
1000 (WD-1008C]
7. Top lid 5. Program selection knob
2. Auxiliary function buttons 6. Detergent dispenser
3. Spin speed selection button 7. Front door
4. Thermostat adjustment knob 8. Kick plate
9. Kick plate opening screw
10. Handle
5. Electrical connection
Make sure that you
have grounded
power ovtlet.
Connect the power cord to the appropriate electrical socket with an equivalent
current rating indicated at the back of the machine.
6. Operation
AHention! Detergent dispenser Select the program
Before any operation
of the machine check
the following.
before selecting the
program and the
temparature. After you
have finished the
adjustment, you can
push the knobs in. This
will prevent the knobs
from being played by
A-Did you close the
front door?
B-Is the tap open?
€-Is water drain
hose placed a. Compartment |. detergent
he compartment for prewash cycle.
properly: b. Compariment Il. detergent softener to the marking. Do not overfill above
D- Is power compartment for wash cycle. the max mark as any excess amount will mix into the
ted? e. " Y " Compartment for fabric softener. wash water and you will have to re-fill the
connectea: el. Siphon. compartment. Concentrated softener may clogg the
Program selection table
siphon, in this case add some water fo the
softener liquid.
Push out the knobs Press to release
your children. Turn the knob clockwise to
select the required program
Fill the fabric
TEMPERATURE °C LOAD kg.
DISPENSER HALF | RINSE HOLD
PROGRAMMES | COMPARTMENT LOAD wo-s007c | WP-6008C FABRIC TYPE
WHITES |COLOUREDS WD-8007C | WD-1008C
A [+1 * 50-90 30-40 5,0 4,5 Heavy soiled cotions and linens
B Il * 30-90 R40 5,0 4,5 Normally soiled cottons and linens
X Il * ^ 60 ^ 40 5,0 4,5 Lightly soiled cottons and linens
M Il * 30-40 a -30 5,0 4,5 Very lightly soiled or color fast cottons and linens
С Spin for cottons and linens
D 1+ 11 * 30-60 30-40 2,5 2,5 Heavy soiled synthetics
F Il * 30-60 30-40 2,5 2,5 Normally soiled synthetics and delicates
G Il * ^ -50 ^ 40 2,5 25 Lightly soiled synthetics and delicates
J Il * a 40 ® 30 1,5 1,5 Woolens
H Spin for synthetics and delicates
Р Discharging
{* ) Options available
Ba (2) & | Optional functions 7. Unloading the
-40 machine
Half Load
® The most economic wash is obtained by selecting The machine stops
the half load button, if the amount of clothing icall h
. . , , automatically апег the
determined in the program selection table is half of a leted
; programs are completed.
normal load select the half load option. h # knob
Press the On/Off knob to
N 7 * Whenever the half load button is selected, half of turn off your machine. The
IN | the amount of detergent should be used. door can be opened 1/2
The program can be started by pressing the Rinse Hold minutes after the washing
On/ Off knob to “ON” posifion. The door If you desire to leave your synthetic fabrics in the cycle is completed. Turn off
will be locked and the indicator will light. machine after the wash program you may select the the taps. Unload the
Rinse hold button to prevent them getting wrinkled.To machine and leave the door
continue the program, you can either press the Rinse open fo air the
I hold button again or select D on the program selection machine.
Warning! knob fo discharge the water
Do not select the half load button , 9 Ne
while washing wool fabrics. Spin Speed Selection
When you want to reduce the spin speed to 500 rpm (for
WD 8007 C, WD-8008C, WD-1008 C) or no spin is
desired (for WD-6007C, WD-6008C) press this button.
8. Care and maintanence
Detergent dispenser
To clean the detergent residues, remove the detergent | Siphon
dispenser by pressing on the area marked on the Clean the siphon [coloured piece in the dispenser) every 30-40 washes. Pull
siphon. Wash the dispenser with water and also clean | out the siphon by holding its edges. To prevent clogging, clean the softener
the dispenser housing before reinserting the dispenser. | residues thoroughly and make sure that the siphon fits info position correctly
bef tion.
Cleaning the pump filter efore any operation
To prevent objects entering the pump and causing
damage, your machine employs a filter system that
extends the pump life. It is advisable that you should
clean the filter at every 30-40 washes. Before opening
the filter door, disconnect the power. Turn the opening
of kick plate screws 90° with a help of screw driver
or a coin. Place a little pan infront of the filter door
to catch the small amount of water spilling from the
machine. Remove the filter by turning in an anti
clockwise direction. After cleaning the filter, replace
it by turning clockwise and make sure that it is closed
firmly. Replace the kick plate and secure it by the
locking screws.
Water intake filter
At the end of the water intake connection module and water inlet hose-tap side, there exists filters. These filters prevent any dirt
and objects passing into the machine. It is advisable that these filters should be cleaned every 30-40 washes. To clean the filter,
first turn the tap off. Then, disconnect the hose and clean the filter with a thin brush. If the filter is very dirty, you may clean it by
pulling out with pliers. To clean the filter at the tap side of the hose, pull it out by hand and clean the filter under the tap water.
_ NN
Hoses
To prevent any leakage, have a technician to control the hoses
every two years. If the machine is placed at cold ambient
temperatures, the water remaining inside the pump and hoses
should be removed from the filters. Also to prevent freezing,
emply the water intake hoses
by disconnecting from taps. J
Destriptions of the international textile
care label (ITCL) symbols
we A xX VW E e @© ©
Chemicals can
Washing Bleach can Do not use Do not machine Dry on horizantal
temperature be used bleach wash su Do not wash Dry clean be used
(J
No dry cleaning ; Can be washed Do not wash ; ; ; Warm i
No spin at centrifugal centrifugal Line dry Iron permitted Do not iron arm iron
machine machine
o LG Electronics Inc.
LG Twin Towers
20, Yoldo-dong, Youngdungpo-gu, Seoul, 150-721, Korea
Phone : 82-2-3777-1114
http: 77 www.Ige.co.kr