Samsung SP-67L6HX/HAC User manual

BP68-00613D-00Eng
6/14/06
10:13 AM
Page 1
DLP TV
SP50L6HX
SP56L6HX
SP56K3HX
SP61L6HX
SP61K3HX
SP67L6HX
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Picture In Picture (PIP)
My Colour Control
SRS TruSurroundXT
Digital Natural Image engine
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 2
© 2006 Samsung Electronics Co., Ltd. All rights reserved.
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 3
Contents
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
Checking Parts ..............................................................................................
Control Panel.................................................................................................
Connection Panel ..........................................................................................
Infrared Remote Control ................................................................................
Inserting the Batteries in the Remote Control................................................
Connecting to an Aerial or Cable Television Network ...................................
Connecting a Satellite Receiver or Decoder..................................................
Switching Your Television On and Off...........................................................
Placing Your Television in Standby Mode .....................................................
Becoming Familiar with the Remote Control .................................................
Plug & Play Feature.......................................................................................
Choosing Your Language..............................................................................
5
6
8
11
12
13
13
14
14
15
16
17
◆ SETTING THE CHANNELS
■
■
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Sorting the Stored Channels .........................................................................
Assigning Names to Channels ......................................................................
Locking the Channel......................................................................................
Using the LNA (Low Noise Amplifier) Feature...............................................
Fine Tuning Channel Reception ....................................................................
18
19
21
22
23
24
25
26
◆ USING YOUR DISPLAY
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Displaying Information ...................................................................................
Changing the Picture Standard .....................................................................
Customizing the Picture Settings...................................................................
Setting the Picture (PC Mode).......................................................................
Selecting the Picture Size..............................................................................
Viewing the DNIe Demonstration ..................................................................
Freezing the Current Picture .........................................................................
Setting the My Colour Control (Easy Control) ...............................................
Setting the My Colour Control (Detail Control) ..............................................
Setting the Blue Screen.................................................................................
Activating Panel Button Lock.........................................................................
Setting the Film Mode....................................................................................
Viewing the Picture in Picture (PIP)...............................................................
Using the Digital NR (Noise Reduction) Feature ...........................................
Changing the Sound Standard ......................................................................
Customizing the Sound Settings ...................................................................
Setting the TruSurround XT...........................................................................
26
27
28
29
31
32
32
33
34
35
35
36
37
40
41
42
43
continued...
English - 3
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 4
◆ USING YOUR DISPLAY (continued)
■
■
■
■
■
■
■
■
Adjusting the Volume Automatically ..............................................................
Selecting the Internal Mute............................................................................
Setting the Melody Sound .............................................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer .................................................................................
Switching the Television On and Off Automatically .......................................
Viewing an External Signal Source ...............................................................
43
44
44
45
46
47
48
50
◆ USING THE TELETEXT FEATURE
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page..............................................................................
51
52
53
54
◆ ADDITIONAL INFORMATION AND CONNECTIONS
■
■
■
■
■
■
■
■
■
■
Connecting to the External Input/Output .......................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting to the Component Input..............................................................
Connecting to the PC Input ...........................................................................
Connecting to the HDMI (High Definition Multimedia Interface) Input ...........
Connecting to the HDMI/DVI Compatible ......................................................
Connecting Home Theater System ...............................................................
Setting up Your PC Software (Windows only) ..............................................
PC Input Mode...............................................................................................
55
56
56
57
57
58
58
59
60
61
◆ RECOMMENDATIONS FOR USE
■
■
■
■
■
Setting Up Your Remote Control ...................................................................
Remote Control Codes ..................................................................................
Replacing the Lamp.......................................................................................
Troubleshooting: Before Contacting Service Personnel................................
Technical Specifications ................................................................................
Symbols
Press
English - 4
☛
Important
➢
Note
62
64
67
68
69
➢
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 5
Checking Parts
Owner’s Instructions
Remote Control/
AAA Batteries
Warranty Card/
Safety Guide Manual
(Not available in
all locations)
Power Cord
Sold Separately
S-VIDEO Cable
HDMI Cable
Antenna Cable
Replacement Lamp
For purchasing a replacement lamp,
ask at a nearby service center.
• Use authorized lamps only. The
company cannot guarantee the
quality of the product if an
unauthorized lamp is used.
Component Cables
(RCA)
Scart Cable
➢
PC Audio Cable
PC Cable
HDMI/DVI Cable
When installing the product, make sure to keep
it away from the wall (more than 10cm) for
ventilation purposes.
• Poor ventilation may cause an increase
in the internal temperature of the product,
resulting in a shortened component life
and degraded performance.
English - 5
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 6
Control Panel
➢
The actual configuration on your TV may be different, depending on
your model.
(
Front of the TV
(SP50L6HX/SP56L6HX/SP61L6HX/SP67L6HX)
Switch among video input modes
Display the on-screen menu
Adjust the volume
Select the channels
LED Indicators
Switch the TV On and Off
Access to the selected option on
the menu system
Picture On/Off
➢
Remote Control Sensor
Front of the TV
(SP56K3HX/SP61K3HX)
LED Indicators
Switch among video input modes
Display the on-screen menu
Adjust the volume
Switch the TV On and Off
Picture On/Off
Remote Control
Sensor
Select the channels
Access to the selected option on
the menu system
continued...
English - 6
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 7
n
(
:On,
:Blinking,
TIMER
LAMP
:Off)
STAND BY/TEMP
Indication
Standby mode.
s
A timer pilot lights when Timer Auto On or Off is selected.
Normal operation.
Normal operation (when Timer Auto On or Off is selected).
Lamp is warming up. The normal picture comes on after 25 seconds.
The normal picture comes on after 25 seconds. (when Timer Auto On or
Off is selected)
Air vent cover in the rear of the TV is not properly installed.
Inside temperature of the TV is over normal. Clean the air vent cover in the
rear of the TV. Turn the TV back on after 1 hour.
The lamp does not work, please contact an authorized Service Center for
assistance.
➢
◆ It takes about 30 seconds for the TV to warm up, so normal brightness may not appear
immediately.
◆ The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it
working.
◆ You can use the channel selection buttons to switch on the TV when it is in standby mode
depending on the model.
◆ When using the on-screen menu the volume adjustment and channel selection buttons have
the same function as the …/†/œ/√ buttons on the remote control.
◆ If the remote control no longer works or you have lost it, you can use controls on the panel
of the TV.
◆ Press the "I" side of the POWER switch to supply power to the TV. If the "I " side of the
POWER switch is not pressed, the POWER button on the remote control and the Picture
On/Off switch on the front panel of the TV will not work.
English - 7
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 8
Connection Panel
➢
The actual configuration on your TV may be different, depending on
your model.
Side of the TV
(SP50L6HX/SP56L6HX/SP61L6HX/SP67L6HX)
Video Input
Audio Input
S-Video Input
continued...
English - 8
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 9
n
Side of the TV
(SP56K3HX/SP61K3HX)
S-Video Input
Video Input
Audio Input
continued...
English - 9
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 10
Rear of the TV
c
(
a) ANT IN
h) HDMI/DVI IN
Coaxial connector for Aerial/Cable Network.
Connect to the HDMI jack of a device with HDMI
output. These inputs can also be used as a DVI
connection with separate analog audio inputs. An
optional HDMI/DVI cable will be necessary to make
this connection. When using the optional HDMI/DVI
adapter, the DVI analog audio inputs on your TV allow
you to receive left and right audio from your
DVI device. (Not compatible with PC)
b) S-VIDEO 1, 2
Video input for external devices with an S-Video
output, such as a camcorder or VCR.
c) AV IN 1, 2 (VIDEO / AUDIO L/R)
Video and audio inputs for external devices, such as a
camcorder or VCR.
d) AV OUT (VIDEO / AUDIO L/R)
i) SERVICE
Service connection for qualified service engineer.
Outputs for external devices.
e) COMPONENT IN 1, 2
Video (Y/PB/PR) and audio (AUDIO L/R) inputs for
Component.
f) PC IN (PC / AUDIO)
Connect to the video and audio output jack on your PC.
g) DVI IN (AUDIO L/R)
DVI audio inputs for external devices.
English - 10
j) EXT(RGB)
Inputs or outputs for external devices, such as VCR,
DVD, video game consoles or Cable/Satellite sources.
➢
➢
For further details about connection, refer to
pages 55~59.
Whenever you connect an audio or video system to
your television, ensure that all elements are
switched off. Refer to the documentation supplied
with your equipment for detailed connection
instructions and associated safety precautions.
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 11
Infrared Remote Control
Selects a target device to be
controlled by the Samsung remote
control (TV, DVD, STB, CABLE, VCR)
Turns the TV on and off
External input selection
Direct channel selection
Switch repeatedly between the last two
channels displayed/
Teletext Sub-page
One or two-digit channel selection
DNIe ON/OFF
TV mode Selection
Current time display
Automatic switch-off
(Refer to page 47)
VCR/DVD Function
(Rewind, Stop, Play/Pause, Fast/Forward)
Volume increase
Next channel/
Teletext next page
Volume decrease
Previous channel/
Teletext previous page
Temporary sound switch-off
Menu display/
Teletext index
Move to the required menu option/
Adjust an option value
respectively
Picture-In-Picture On/Off/
Teletext page hold
w
Sound effect selection
(Refer to page 41)
Picture effect selection
(Refer to page 27)
Sound mode selection
TruSurround XT mode selection
(Refer to page 43)
Used during set up of this Samsung
remote control, so that it will work
compatibly with other devices (VCR,
Cable Box and DVD).
Exit menu/
Teletext cancel
Information display/Teletext reveal
(Refer to page 26)
Teletext display/
Mix both teletext information and
the normal broadcast
Picture still (Refer to page 32)
Fastext topic selection
Picture size (Refer to page 31)
PIP functions:
- Swapping the main and the sub
picture (SWAP)
- Channel selection (P
)
(Refer to page 39)
If your remote control is not functioning
properly, take out the batteries and press
the reset button for about 2~3 seconds.
Re-insert the batteries and try using the
remote control again.
m to
d
➢
➢
The performance of the remote control may be affected by bright light.
This is a special remote control for the visually impaired, and has Braille points.
English - 11
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 12
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
T
th
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Lift the cover at the back of the remote control upward as shown in
the figure.
2
Install two AAA size batteries.
➢ Make sure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.
3
Close the cover as shown in the figure.
➢ Remove the batteries and store them in a cool, dry place if
you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the
TV. (Assuming typical TV usage, the batteries last for about
one year.)
In
yo
de
re
◆
◆
➢
English - 12
n
n
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 13
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
◆ An indoor aerial
1
In the first three cases, connect the aerial or network input cable to
the ANT IN jack on the rear of the television.
2
If you are using an indoor aerial, you may need to adjust its
position when tuning your television until you obtain a picture that
is both sharp and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 18.
◆ “Storing Channels Manually” on page 19.
➢
Rear of the TV
or
Cable Television
Network
When installing or re-installing your TV, be sure to use the
supplied coaxial antenna cable. If you connect using a different
coaxial cable, there is risk of noise or interference to the screen
image. (You must not use another general purpose cable.
Use the 3M/5M/7M cable supplied by Samsung.)
Connecting a Satellite Receiver or Decoder
In order to watch television programmes broadcast via a satellite network,
you must connect a satellite receiver to the rear of TV. Also, in order to
descramble a coded transmission signal, you must connect a decoder to the
rear of TV.
Rear of the TV
◆ Using a SCART cable
Connect the receiver (or decoder) SCART cable to one of the SCART
connectors on the rear of the television.
◆ Using a coaxial cable
Connect a coaxial cable to the:
- Receiver (or Decoder) output socket.
- Television aerial input socket.
➢
Coaxial
cable
SCART
cable
If you wish to connect both a satellite receiver (or decoder) and
a VCR, you should connect the:
◆ Receiver (or Decoder) to the VCR
◆ VCR to the television
Otherwise, connect the receiver (or decoder) directly to the
television.
Satellite Receiver/Decoder
English - 13
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 14
Switching Your Television On and Off
Depending on the model
T
Plug the mains lead to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the power switch on the side of the television toward
“ON” (I).
3
Press the POWER ( ) button on the remote control (or the
“PICTURE ON/OFF” button on the front of the television).
Result:
➢
Depending on the model
4
The programme that you were watching last is reselected automatically. However, if a SCART signal
input is present, the SCART signal has priority.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on
page 18 or “Storing Channels Manually” on page 19.
To switch your television off, press the power switch toward
“OFF” (O).
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
SP56K3HX / SP61K3HX
1
Press the POWER (
screen off.
Result:
2
SP50L6HX / SP56L6HX / SP61L6HX / SP67L6HX
The STAND BY/TEMP indicator on the front of the
television turns on.
To turn the screen back on, simply press the POWER (
again.
➢
☛
English - 14
) button on the remote control to turn the
You can also switch on by pressing the P
numeric button on the remote control.
/
) button
, TV or any
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the power
switch on the back of the set. It is best to unplug the set
from the mains and aerial.
T
th
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 15
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume.
◆ Set up the television using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
P
Used to display the next
stored channel.
Used to display the
previous stored channel.
to
-/--
Menu Function
-
Used to display the corresponding channels.
➢
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this
will result in a single digit channel being displayed.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to increase the volume.
Used to decrease the volume.
MUTE
(
)
MENU
(
)
Used to switch the sound off temporarily.
➢
To turn the sound back on, press this button
again, or press the or button.
Used to display the
on-screen menu system.
-
EXIT
(
)
PRE-CH
Used to return to the previous
menu or normal viewing.
Used to:
◆ Display a sub-menu
containing selections for
the current menu option.
◆ Increase/decrease a
menu option value.
Used to confirm your choice.
Used to exit from the menu
system and return to normal
viewing directly.
Press the PRE-CH button. The TV will switch to the last
channel viewed. To quickly switch between two channels
that are far apart, select the first channel, then use the
numeric buttons to select the second channel. Then, use the
PRE-CH button to quickly alternate between them.
English - 15
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 16
Plug & Play Feature
When the television is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
Plug & Play
Start Plug & Play.
If
OK
Enter
1
Exit
Result:
Plug & Play
English
Français
Türkçe
Language
Move
If the television is in standby mode, press the POWER (
on the remote control.
Enter
2
➢
Skip
3
Plug & Play
Check antenna input.
4
The Language menu is displayed.
Select the appropriate language by pressing the … or † button.
Press the ENTER (
) button.
Result:
Skip
) button.
The Language menu will automatically appear after several
seconds, even if the ENTER (
) button is not pressed.
OK
Enter
The message to start Plug & Play is displayed.
To start Plug & Play, press the ENTER (
Result:
) button
The message to check the connected status of the
antenna is displayed.
Make sure that the antenna is connected to the TV.
Press the ENTER (
) button.
Plug & Play
Area
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Result:
5
Select your country or area by pressing the … or † button.
Press the ENTER (
) button.
Result:
Move
Enter
6
To start channel store, press the ENTER (
Result:
Auto Store
1
C --
40 MHz
0%
Start
Enter
➢
Skip
➢
Plug & Play
-- : -- am
Clock Set
Enter
12 : 00
Adjust
8
) button.
The search will end automatically. Channels are sorted
and stored in the order which reflects their position in
the frequency range (with lowest first and highest last).
When this has finished, the menu to set the time will be
displayed.
To stop the search before it has finished or return to normal
viewing, press the MENU (
) or the ENTER (
) button.
Press the ENTER (
) button to set the clock.
Press the œ or √ button to select the hour, minute, or am/pm.
Set these by pressing the … or † button.
➢
Plug & Play
Move
7
Skip
Clock Set
The menu to select channels is displayed.
Skip
Plug & Play
P
The Area menu is displayed.
You can enter the hours or minutes by using the numeric
buttons on the remote control.
The settings are complete, and the stored channel will be
activated.
am
Enter
Skip
Enjoy your watching.
OK
English - 16
continued...
W
s
i
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 17
If you want to reset this feature...
1
TV
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the … or † button to select Setup.
Result:
The Setup menu is displayed.
3
Press the ENTER (
) button.
4
Press the ENTER (
) button again to select Plug & Play.
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
Move
Result:
➢
The message to start Plug & Play is displayed.
: English
: Off
: On
: Off
Enter
Return
Plug & Play
For further details on settings, refer to the previous page.
Start Plug & Play.
OK
Enter
Return
Choosing Your Language
d
.
e
l
n.
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1
Press the MENU (
Result:
2
TV
) button.
The main menu is displayed.
Press the … or † button to select Setup.
Result:
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Language.
Press the ENTER (
) button.
Result:
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
Move
: English
: Off
: On
: Off
Enter
Return
) button.
The available languages are listed.
5
Select the appropriate language by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
TV
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
Move
: English
English
Français
Türkçe
: Off
: On
: Off
Enter
English - 17
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 18
Storing Channels Automatically
TV
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Move
: Asia/W.Europe
You can scan for the frequency ranges available to you (availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However
you can sort numbers manually and clear any channels you do not wish
to watch.
1
: Off
Result:
Enter
Move
TV
The main menu is displayed.
Press the … or † button to select Channel.
Result:
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
) button.
Return
2
TV
Press the MENU (
: Asia/W.Europe
Asia/W.Europe
3
The Channel menu is displayed.
Press the ENTER (
) button.
CIS/E.Europe
Result:
China
The Area is selected.
Hong kong/UK
Australia
4
Result:
: Off
Enter
Press the ENTER (
Return
) button again.
The available areas are listed.
5
Select your Area by pressing the … or † button.
6
Press the ENTER (
7
Press the … or † button to select Auto Store.
Press the ENTER (
) button.
) button.
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Move
: Asia/W.Europe
Result:
8
: Off
Enter
P
1
C --
Result:
➢
40 MHz
0%
Start
Enter
Press the ENTER (
Return
Auto Store
Return
English - 18
9
The Auto Store menu is displayed.
) button again to start the search.
The search will end automatically. Channels are sorted
and stored in the order which reflects their position in
the frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
To stop the search before it has finished, press the MENU
(
) or the ENTER (
) button.
When the channels have been stored, you can:
◆ Sort them in the order required (“Sorting the Stored
Channels” on page 22).
◆ Clear a channel (“Skipping Unwanted Channels” on page 21).
◆ Fine-tune channel reception if necessary (“Fine Tuning
Channel Reception” on page 26).
◆ Assign a name to the stored channels (“Assigning Names to
Channels” on page 23).
◆ Activate/deactivate the Digital NR (Noise Reduction) feature
(“Using the Digital NR (Noise Reduction) Feature” on page 40).
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(“Using the LNA (Low Noise Amplifier) Feature” on page 25).
Y
ne
W
BP68-00613D-00Eng
10:13 AM
Page 19
Storing Channels Manually
You can store television channels, including those received via cable
networks.
TV
When storing channels manually, you can choose:
1
Press the MENU (
Result:
2
) button.
: Asia/W.Europe
: Off
Move
Enter
TV
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
The Channel menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Manual Store.
Press the ENTER (
) button.
5
If necessary, select the broadcasting standard required.
Press the … or † button to select Colour System.
Press the ENTER (
) button.
) button.
:
:
:
:
:
:
Move
6
TV
The following options are available.
(depending on the model)
P 1
AUTO
BG
C
5
175 MHz
?
Enter
Return
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
Select the required colour standard by pressing the … or †
button. Press the ENTER (
) button.
Result:
Return
The main menu is displayed.
Press the … or † button to select Channel.
Result:
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
◆ Whether or not to store each of the channels found.
◆ The programme number of each stored channel which you
wish to identify.
:
:
:
:
:
:
P 1
AUTO
AUTO
BG PAL
C SECAM
2
48NTSC4.43
MHz
? NTSC3.58
AUTO - PAL - SECAM - NTSC4.43 - NTSC3.58
d
.
6/14/06
Move
7
TV
8
Enter
Return
Press the … or † button to select Sound System.
Press the ENTER (
) button.
Select the required sound standard by pressing the … or †
button. Press the ENTER (
) button.
Result:
The following options are available.
BG - DK - I - M
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
:
:
:
:
:
:
P 1
AUTO
BG BG
C
2
DK
48 MHz
I
?
M
).
Move
Enter
).
.
continued...
English - 19
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 20
9
TV
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
:
:
:
:
:
:
P 1
AUTO
BG
C
05
175 MHz
?
If you know the number of the channel to be stored, see the
following steps.
◆ Press the … or † button to select Channel.
Press the ENTER (
) button.
Y
op
ha
A
d
◆ Press the … or † button to select C (Air channel) or
S (Cable channel).
◆ Press the √ button.
Adjust
TV
Enter
◆ Press the … or † button to select the required number.
Press the ENTER (
) button.
Return
➢
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
:
:
:
:
:
:
Adjust
P 1
AUTO
BG
C
5
175 MHz
?
Enter
➢
10
Return
You can select the channel directly by pressing
the numeric buttons on the remote control.
If there is abnormal sound or no sound, re-select the
sound standard required.
If you do not know the channel numbers, select Search by
pressing the … or † button. Press the ENTER (
) button.
Press the … or † button to start the search.
Press the ENTER (
) button.
Result:
TV
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
Move
:
:
:
:
:
:
P 1
AUTO
BG
C
5
175 MHz
OK
Enter
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
11
To assign a programme number to a channel, select Programme
by pressing the … or † button. Press the ENTER (
) button.
12
Press the … or † button until you find the correct number.
Press the ENTER (
) button.
➢
Return
You can select the programme directly by pressing
the numeric buttons on the remote control.
13
To store the channel and associated programme number, select
Store by pressing the … or † button. Set to OK by pressing the
ENTER (
) button.
14
Repeat steps 9 to 13 for each channel to be stored.
15
Press the EXIT button to exit.
☛
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to P99. You can select a
channel by entering the position number in this mode.
◆ C (Air channel mode): You can select a channel by entering
the assigned number to each air broadcasting station in this
mode.
◆ S (Cable channel mode): You can select a channel by entering
the assigned number for each cable channel in this mode.
English - 20
\
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 21
Skipping Unwanted Channels
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those that you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1
Press the MENU (
Result:
TV
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
) button.
The main menu is displayed.
: Asia/W.Europe
: Off
Move
2
Result:
3
4
Enter
The Channel menu is displayed.
Press the ENTER (
TV
) button.
Add/Delete
Prog.
The Add/Delete menu is displayed with the current
channel selected.
Name
Move
n
Press the … or † button to delete or add the required
channel.
Press the ENTER (
) button.
Result:
If the ENTER (
) button is pressed repeatedly,
the
will appear and disappear.
If the
appears, the channel is added.
6
Repeat step 5 for each channel to be deleted or added.
7
Press the EXIT button to exit.
Added
---------------------
0
1
2
3
4
Press the … or † button to select Add/Delete.
Press the ENTER (
) button.
Result:
5
Return
Press the … or † button to select Channel.
TV
Enter
Return
Add/Delete
Prog.
0
1
2
3
4
Name
Added
---------------------
Move
Enter
\
English - 21
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 22
Sorting the Stored Channels
TV
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto store.
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Move
TV
: Asia/W.Europe
1
Result:
2
: Off
Enter
0
Ch.
C --
1
C7
2
C 19
3
C 25
4
C 26
Move
4
Press the … or † button to select Sort.
Press the ENTER (
) button.
5
Select the channel that you wish to move by pressing the … or †
button. Press the ENTER (
) button.
6
Select the number of the programme to which the channel is to
be moved by pressing the … or † button.
Press the ENTER (
) button.
Return
Sort
Prog.
Ch.
0
C --
2
C 19
3
C 25
4
C 26
Name
Enter
English - 22
Return
) button.
The channel is moved to its new position and all other
channels are shifted accordingly.
7
Repeat steps 5 to 6 until you have moved all the channels to the
required programme numbers.
8
Press the EXIT button to exit.
C7
Move
The Channel menu is displayed.
Press the ENTER (
Result:
TV
The main menu is displayed.
3
Name
Enter
) button.
Press the … or † button to select Channel.
Result:
Return
Sort
Prog.
Press the MENU (
C
b
na
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 23
Assigning Names to Channels
Channel names will be assigned automatically when channel information is
broadcast. These names can be changed, allowing you to assign new
names.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ENTER (
4
Press the … or † button to select Name.
Press the ENTER (
) button.
7
) button.
TV
Prog.
The Name menu is displayed with the current channel
selected.
: Asia/W.Europe
: Off
Enter
Return
Name
0
Ch.
C --
Name
-----
1
C7
-----
2
C 19
-----
3
C 25
-----
4
C 26
-----
Press the … or † button to select the channel to be assigned to a
new name. Press the ENTER (
) button.
Result:
6
Move
The Channel menu is displayed.
3
Result:
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Press the … or † button to select Channel.
Result:
5
TV
Move
Enter
Return
Arrow indications are displayed around the name box.
Press the … or † button to select a letter (A~Z), a number (0~9),
or a symbol. Move on to the previous or next letter by pressing the
œ or √ button.
Press the ENTER (
) button.
8
Repeat steps 5 to 7 for each channel to be assigned to a new
name.
9
Press the EXIT button to exit.
TV
Name
Prog.
0
Ch.
C --
Name
-----
1
C7
A
2
C 19
-----
3
C 25
-----
4
C 26
-----
Move
Adjust
English - 23
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 24
Locking the Channel
TV
This feature allows you to prevent unauthorized users, such as children,
from watching unsuitable programmes by muting out video and audio.
Child Lock cannot be released using front panel buttons. Only remote
control can release the Child Lock setting, so keep the remote control
away from children.
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
Move
: English
: Off
: On
: Off
1
Press the MENU (
Result:
Enter
Press the … or † button to select Setup.
Result:
Child Lock
Child Lock
Programme
Lock
Move
TV
: On
:P 1
:?
Enter
Adjust
: On
:
01
:?
Enter
Press the ENTER (
4
Press the … or † button to select Child Lock.
Press the ENTER (
) button.
5
Press the ENTER ( ) button again.
Select On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the … or † button to select Programme.
Press the ENTER (
) button.
7
Select the number of programme to which the channel is to be
locked by pressing the … or † button.
Press the ENTER (
) button.
8
Press the … or † button to select Lock.
Select Locked by pressing the ENTER (
Child Lock
Child Lock
Programme
Lock
9
: On
:P 1
: Locked
Enter
P 1
Mono
English - 24
) button.
Return
The selected channel is locked and marked with the
symbol.
Press the EXIT button to exit.
➢
Move
) button.
Return
Result:
TV
The Setup menu is displayed.
3
Return
Child Lock
Child Lock
Programme
Lock
The main menu is displayed.
Return
2
TV
) button.
◆ A Blue screen is displayed when the Child Lock is
activated.
◆ To unlock the Channel lock, press the ENTER (
)
button again. The locked channel is unlocked.
◆ When a channel is locked, the channel is marked with
the
symbol on the left side in the Channel OSD (On
Screen Display).
T
si
lo
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 25
Using the LNA (Low Noise Amplifier) Feature
This function is very useful in the situation that the TV is used in a weak
signal area. LNA amplifies the TV signal in the weak signal area, a
low-noise preamplifier boosts the incoming signal.
1
Press the MENU (
Result:
TV
) button.
The main menu is displayed.
Press the … or † button to select Channel.
2
Result:
3
) button.
4
Press the … or † button to select LNA.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Move
The Channel menu is displayed.
Press the ENTER (
Press the EXIT button to exit.
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
TV
: Off
Enter
Return
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Move
➢
: Asia/W.Europe
: Asia/W.Europe
Off
: Off
Enter
◆ If the picture is noisy with the LNA set to On, select Off.
◆ LNA setting must be set for each individual channel.
English - 25
On
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 26
Fine Tuning Channel Reception
TV
Channel
Area
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
: Asia/W.Europe
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
Press the MENU (
Result:
) button.
The main menu is displayed.
: Off
Move
Enter
Return
Press the … or † button to select Channel.
2
Result:
The Channel menu is displayed.
Fine Tune
P 1
3
Press the ENTER (
4
Press the … or † button to select Fine Tune.
Press the ENTER (
) button.
) button.
0
Reset
Adjust
Move
Save
Return
Result:
Fine Tune
P 1
5
To obtain a sharp and clear picture and good sound quality,
press the œ or √ button until you reach the optimal setting.
6
To store the fine tuning setting in the TV’s memory, press the
ENTER (
) button.
3
Reset
Adjust
Move
Save
Return
Result:
Fine Tune
P 1 *
3
Move
Save
Return
To reset the fine tuning to 0, select Reset by pressing the … or †
button then press the ENTER (
) button.
8
Press the EXIT button to exit.
➢
P 1 *
Mono
The programme number changes to red and is
marked with a “*”.
7
Reset
Adjust
The horizontal bar is displayed.
➢
If you are unable to fine tune a channel, check that the
Colour System and Sound System settings are correct.
Fine Tune Store will change the colour of the Channel OSD
(On Screen Display) from White to Red and add the “*” mark.
Displaying Information
You can view the channel information and setting status you have
selected by pressing the INFO (
) button on the remote control.
The information displayed varies according to the selected source.
P 1
Mono
Picture
Sound
SRS TSXT
12 : 00 am
:Standard
: Custom
: Off
English - 26
Y
v
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 27
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU (
Result:
TV
) button.
The main menu is displayed.
Press the … or † button to select Picture.
2
Result:
3
The Picture menu is displayed.
Press the ENTER (
Result:
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
Move
) button.
Press the ENTER (
Result:
5
) button again.
) button.
The following options are available.
Dynamic - Standard - Movie - Custom
➢
◆ Choose Dynamic for viewing the TV during the day or
when there is bright light in the room.
◆ Choose Standard for the standard factory settings.
◆ Choose Movie when viewing a movie.
◆ Choose Custom if you want to adjust the settings
according to personal preference (see “Customizing the
Picture Settings”, page 28).
†
6
Select the required option by pressing the … or † button.
Press the ENTER (
) button.
7
Press the EXIT button to exit.
Move
TV
Return
: Standard
80
50
50
50
R 50
: Cool1
Enter
Return
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
Move
➢
Enter
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
The Mode menu is displayed.
Press the ENTER (
Result:
Off
The Mode is selected.
TV
4
Standard
16:9
On
Off
: Dynamic
Dynamic
80
50
50
Custom
50
R 50
: Cool1
Standard
Movie
Enter
You can also set these options simply by pressing the
P.MODE (
: Picture Mode) button on the remote control.
English - 27
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 28
Customizing the Picture Settings
➢
TV
Your television has several setting options that allow you to control
the picture quality.
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
Move
TV
Standard
16:9
On
Off
Off
Enter
Return
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
Move
1
Press the MENU (
) button.
The main menu is displayed.
Result:
2
Press the … or † button to select Picture.
The Picture menu is displayed.
Result:
3
Press the ENTER (
) button.
The Mode is selected.
Result:
4
Press the ENTER (
) button again.
The Mode menu is displayed.
Result:
5
Press the ENTER (
) button.
The following options are available.
Result:
Dynamic - Standard - Movie - Custom
6
Select the required option by pressing the … or † button.
7
Press the ENTER (
8
Select the required option by pressing the … or † button.
The following options are available.
Result:
: Custom
80
50
50
50
R 50
: Cool1
Enter
Return
Contrast
80
TV
◆ Contrast - Brightness - Sharpness - Colour Tint (NTSC only)
◆ Contrast - Brightness : PC mode.
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
Move
TV
: Custom
Cool2
Cool1
Normal
Warm1
: Cool1
Warm2
Enter
80
50
50
50
R 50
9
Move
Press the ENTER (
) button.
The horizontal bar is displayed.
Result:
Press the œ or √ button until you reach the optimal
setting.
➢
Return
◆ The settings values may vary depending on the input
source. (ex. RF, Video, Component, PC, or HDMI.)
Press the MENU ( ) button to return to Mode menu.
Press the … or † button to select Colour Tone.
Press the ENTER (
) button.
11
Select the required option by pressing the … or † button.
The following options are available.
Result:
Cool2 - Cool1 - Normal - Warm1 - Warm2
12
Press the ENTER (
13
To return the factory defaults, select Reset by pressing the
… or † button. Press the ENTER (
) button.
The previously adjusted settings will be reset to the
Result:
factory defaults.
: Custom
80
50
50
50
R 50
◆ Press the … or † button to select other option(s).
10
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
) button.
: Cool1
Enter
Return
14
English - 28
) button.
➢
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
➢
The reset function is also set for each Colour Tone (Cool2,
Cool1, Normal, Warm1, or Warm2).
Press the EXIT button to exit.
l
,
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 29
Setting the Picture (PC Mode)
➢
1
Preset to the PC mode by pressing the SOURCE (
Press the MENU (
) button.
) button.
TV
Result:
2
The main menu is displayed.
Press the … or † button to select Setup.
Result:
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select PC.
Press the ENTER (
) button.
Result:
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
) button.
: English
: Off
: On
: Off
Move
The PC menu is displayed.
Enter
TV
Return
PC
Image Lock
5
6
Press the ENTER (
Press the ENTER (
Position
Auto Adjustment
Image Reset
Press the … or † button to select the option (Coarse or Fine) to
be adjusted. Press the ENTER (
) button.
Result:
➢
➢
The horizontal bar is displayed.
Press the œ or √ button until you reach the optimal
setting.
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of screen.
Press the ENTER (
8
Press the MENU (
Result:
TV
Enter
Return
Image Lock
Coarse
50
Fine
50
Move
) button.
Enter
Return
) button.
Coarse
The PC menu is displayed again.
Press the … or † button to select Position.
Press the ENTER (
) button.
➢
Move
Press the … or † button to select other option(s).
7
9
) button to select Image Lock.
) button.
TV
Adjust the PC’s screen positioning if it does not fit the TV
screen.
10
Adjust the position by pressing the …/†/œ/√ button.
11
Press the ENTER (
50
PC
Image Lock
Position
Auto Adjustment
Image Reset
) button.
Move
TV
Enter
Return
Position
continued...
Adjust
Enter
English - 29
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 30
12
TV
PC
Image Lock
Press the … or † button to select Auto Adjustment.
Press the ENTER (
) button.
Result:
Position
Auto Adjustment
Image Reset
13
Move
Enter
14
The screen quality and position are automatically reset.
The settings are all finished, and the TV will
automatically return to the previous picture.
To return the factory defaults, select Image Reset by pressing
the … or † button. Press the ENTER (
) button.
Result:
Return
Y
re
The previously adjusted settings will be reset to the
factory defaults.
Press the EXIT button to exit.
Auto Adjustment in progress.
Please wait.
TV
PC
Image Lock
Position
Auto Adjustment
Image Reset
Move
Enter
Return
Image Reset has completed.
Return
Po
English - 30
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 31
Selecting the Picture Size
You can select the picture size which best corresponds to your viewing
requirements.
1
Press the MENU (
Result:
TV
) button.
The main menu is displayed.
Press the … or † button to select Picture.
2
Result:
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
The Picture menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Size.
Press the ENTER (
) button.
Move
) button.
Standard
16:9
On
Off
Off
Enter
Return
RF/AV/S-Video SD-level-Component Mode
TV
Size
16:9
Zoom
4:3
Select the required option by pressing the … or † button.
5
Result:
◆ 16:9
◆ Zoom
◆ 4:3
6
The following modes are available depending on the
mode.
: Sets the picture to 16:9 wide mode. Press the
√ button. The picture position ( ,
) and
size ( ) adjustment are able in these mode by
pressing the ▲ or ▼ button.
: Magnify the size of the picture vertically on
screen. Press the √ button. The picture position
( ) and size ( ) adjustment are able in
these mode by pressing the ▲ or ▼ button.
: Sets the picture to 4:3 wide mode. Press the
√ button. The picture position ( ,
) and
size ( ) adjustment are able in these mode by
pressing the ▲ or ▼ button.
When you are satisfied with your setting, press the ENTER (
button.
7
Move
TV
➢
Size
16:9
Zoom
4:3
Move
)
TV
◆ Resizing the screen using the Zoom enables the positioning
and sizing of the screen to up/down direction using the … or
† button as well as the screen size.
◆ Move the screen up/down using the … or † button after
selecting the
by pressing the œ or √ button.
◆ Resize the screen vertically using the … or † button after
selecting the
by pressing the œ or √ button.
(Pressing the … button extends it upward and pressing the
† button extends it downward.)
◆ Screen enlargement operates only in RF/AV/S-video/SD level
Component(480i,576i,480p,576p) input modes.
Enter
Return
Size
16:9
Zoom
4:3
◆ You can select these options simply by pressing the P.SIZE
button on the remote control.
◆ If you change the picture size when PIP is On, PIP will
automatically be turned Off.
◆ Depending on the input source, the P.SIZE options may vary.
Positioning and Sizing the screen using Zoom
Return
PC Mode
Press the EXIT button to exit.
➢
Enter
Move
Enter
Return
HDMI Mode
TV
Size
16:9
Zoom
4:3
Move
Enter
English - 31
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 32
Viewing the DNIe Demonstration
TV
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
Standard
16:9
On
Off
Off
This TV includes the DNIe function so as to provide a high visual
quality.
If you set DNIe Demo to On, you can view an applied DNIe and a
normal picture on the screen, for demonstration purposes. Using
this function, you can view the difference in the visual quality.
1
Press the MENU (
Result:
Move
Enter
Press the … or † button to select Picture.
Result:
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
Move
The main menu is displayed.
Return
2
TV
) button.
Standard
16:9
On
Off Off
The Picture menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select DNIe Demo.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
On
) button.
Off
Enter
DNIe Demo
DNIe Off
Result:
The following options are available.
◆
◆
: Switches on the DNIe Demo mode.
: Switches off the DNIe Demo mode.
Return
On
Off
6
When you are satisfied with your setting, press the ENTER (
button.
7
Press the EXIT button to exit.
DNIe On
➢
)
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and
white enhancement. New image compensation Algorithm
gives brighter, clearer, more detailed image to you.
DNIeTM technology will fit every signal into your eyes.
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the STILL button. To return to normal
viewing, press it again.
➢
English - 32
In the PIP mode, the main and sub pictures are stilled at
the same time.
T
ad
G
th
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 33
Setting the My Colour Control (Easy Control)
This feature allows you to adjust colours according to your preferences, by
adjusting skin, sky, and grass tones using the predefined settings (Blue,
Green, Pink, Standard, and Custom) without affecting other colours on
the screen.
1
Press the MENU (
Result:
TV
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
) button.
The main menu is displayed.
Press the … or † button to select Picture.
2
Result:
3
Move
TV
) button.
5
: Custom
) button again.
Move
The current image will be displayed on the screen.
Result:
Return
The Easy Control is selected.
Press the ENTER (
➢
Enter
My Colour Control
Easy Control
Detail Control
Press the … or † button to select My Colour Control.
Press the ENTER (
) button.
Result:
Off
The Picture menu is displayed.
Press the ENTER (
4
Standard
16:9
On
Off
Enter
Return
The following options are available.
◆ Blue
Emphasizing clear blues.
Original
Custom
◆ Green
Emphasizing mild greens.
◆ Pink
Emphasizing warm skin colours.
Easy Control
œ
◆ Standard
Standard picture.
e
Standard
Custom
Move
Enter
◆ Custom
Changing the settings in the Detail Control
menu will automatically set to Custom
(see next page).
Select the required option by pressing the œ or √ button.
6
Result:
The original picture (before adjustment) is shown on
the left side, while the selected mode is shown on the
right side.
7
When you are satisfied with your setting, press the ENTER (
button.
8
Press the EXIT button to exit.
➢
)
◆ The My Colour Control is not available in PC mode.
◆ When running the My Colour Control feature, the current
picture is captured as a still image before being displayed on
the screen.
◆ You cannot use this function, when PIP is On.
◆ Pressing the ENTER button on the remote control for 3
seconds when there is no OSD on the screen will display the
My Colour Control menu.
English - 33
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 34
Setting the My Colour Control (Detail Control)
This setting can be adjusted to suit your personal preferences.
TV
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
Move
TV
1
Standard
16:9
On
Off
Result:
2
Off
Return
4
Press the … or † button to select My Colour Control.
Press the ENTER (
) button.
5
Press the … or † button to select Detail Control.
Press the ENTER (
) button.
6
Select the required option (Pink, Green, or Blue) by pressing the
▲ or ▼ button. Press the ENTER (
) button.
7
Press the œ or √ button until you reach the optimal setting.
Return
Detail Control
Pink
Green
Blue
Reset
50
50
50
➢
8
9
Enter
Return
Press the MENU (
10
Adjusted
Detail Control
Pink
50
Adjust
TV
Return
Detail Control
Pink
Green
Blue
Reset
50
50
50
Move
Enter
English - 34
Return
) button.
The Detail Control menu is displayed again.
To return the factory defaults, select Reset by pressing the
▲ or ▼ button. Press the ENTER (
) button.
Result:
Original
Changing the adjustment value will refresh the
adjusted screen.
Press the ▲ or ▼ button to select other option(s).
Result:
Move
) button.
: Custom
Enter
Move
The Picture menu is displayed.
Press the ENTER (
Result:
TV
The main menu is displayed.
3
My Colour Control
Move
) button.
Press the … or † button to select Picture.
Result:
Enter
Easy Control
Detail Control
Press the MENU (
If
au
co
O
The previously adjusted colours will be reset to the
factory defaults.
Press the EXIT button to exit.
T
op
co
th
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 35
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to
continue viewing the poor picture, you must set the Blue Screen mode to
Off.
1
Press the MENU (
Result:
2
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
) button.
The main menu is displayed.
Press the … or † button to select Setup.
Result:
3
TV
Move
: English
: Off
: On
: Off
Enter
Return
The Setup menu is displayed.
Press the ENTER (
) button.
4
Press the … or † button to select Blue Screen.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
TV
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
Move
: English
: Off
: On
: Off
Off
On
Enter
Return
Activating Panel Button Lock
This feature allows you to lock the TV panel buttons so that it cannot be
operated via the TV panel. It can, however, still be operated via the remote
control. Only remote control can release the panel lock setting, so keep
the remote control away from unauthorized users.
1
Press the MENU (
Result:
2
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
) button.
The main menu is displayed.
Press the … or † button to select Setup.
Result:
Move
: English
: Off
: On
: Off
Enter
Return
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Panel Lock.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
TV
) button.
Press the EXIT button to exit.
TV
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
Move
: English
: Off
: On
: Off
Enter
English - 35
Off
On
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 36
Setting the Film Mode
You can automatically sense and process film signals from all sources
and adjust the picture for optimum quality.
Picture
TV
Mode
: Standard
Size
: 16:9
Digital NR
: On
DNIe Demo
: Off
My Colour Control
Film Mode
: Off Off
PIP
On
Move
Enter
1
Result:
2
) button.
The main menu is displayed.
Press the ▲ or ▼ button to select Picture.
Result:
Return
The Picture menu is displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select Film Mode.
Press the ENTER (
) button.
5
Select Off or On by pressing the ▲ or ▼ button.
) button.
◆ Off
Switches off the film mode.
◆ On
Automatically senses and processes film signals from
all sources and adjusts the picture for optimum quality.
6
When you are satisfied with your setting, press the ENTER (
button.
7
Press the EXIT button to exit.
➢
English - 36
Press the MENU (
)
◆ The Film Mode is not available in PC, Component (except 480i,
576i), or HDMI mode.
Y
ex
co
s
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 37
Viewing the Picture in Picture (PIP)
You can display a sub picture within the main picture of a TV program or
external A/V devices. In this way you can monitor the video input from any
connected devices while watching TV or other video input.
1
Press the MENU (
Result:
2
TV
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
) button.
The main menu is displayed.
Move
TV
Press the ENTER (
4
Press the … or † button to select PIP.
Press the ENTER (
) button.
Result:
6
) button.
The PIP is selected.
You can select these options by simply pressing the
PIP button on the remote control.
Move
TV
Press the … or † button to select Source.
Press the ENTER (
) button.
Result:
The following options are available.
TV - Ext. - AV1 - AV2 - AV3 - S-Video1 - S-Video2 S-Video3
➢
7
8
The same source cannot be selected on both the main and
sub screens.
Press the … or † button to select Swap.
Press the ENTER (
) button.
➢
9
The main picture and sub picture are interchanged.
You cannot use the Swap function for PC, HDMI or
Component.
Press the … or † button to select Size.
Press the ENTER (
) button.
Result:
The following options are available.
-
➢
10
-
-
You cannot use the Double size (
PC or HDMI mode.
,
: On Off
: TV On
:
:
:P 1
Enter
Return
PIP
PIP
Source
Swap
Size
Position
Programme
: On
: TV
Move
Enter
TV
Select a source of the sub picture by pressing the … or † button.
Press the ENTER (
) button.
Result:
Return
PIP
PIP
Source
Swap
Size
Position
Programme
Press the ENTER (
) button again.
To activate, set PIP to on by pressing the … or † button.
Press the ENTER (
) button.
➢
Enter
The Picture menu is displayed.
3
y.
Off
Press the … or † button to select Picture.
Result:
5
Standard
16:9
On
Off
:
:
:P
TV
Ext.
AV1
AV2
1
AV3
Return
PIP
PIP
Source
Swap
Size
Position
Programme
: On
: TV
Move
Enter
TV
:
:
:P 1
Return
PIP
PIP
Source
Swap
Size
Position
Programme
: On
: TV
Move
Enter
:
:
:P
1
) function for
Select a size of the sub picture by pressing the … or † button.
Press the ENTER (
) button.
continued...
English - 37
Return
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 38
Ea
TV
11
PIP
PIP
Source
Swap
Size
Position
Programme
: On
: TV
Move
Enter
TV
:
:
:P
Result:
➢
1
Return
PIP
PIP
Source
Swap
Size
Position
Programme
Adjust
: On
: TV
:
:
:
Enter
Press the … or † button to select Position.
Press the ENTER (
) button.
01
Return
B
The following options are available.
-
P
The Position menu is available when the Size is
or
mode.
12
Select a position of the sub picture by pressing the … or †
button. Press the ENTER (
) button.
13
Press the … or † button to select Programme.
Press the ENTER (
) button.
14
Select the channel that you want to view through sub picture by
pressing the … or † button.
15
When you are satisfied with your setting, press the ENTER (
button.
16
Press the EXIT button to exit.
S
P
)
T
Su
T
E
A
A
A
S
S
S
C
C
P
H
continued...
English - 38
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 39
Easy functions of the remote control.
Buttons
Feature
PIP
Used to activate or deactivate the PIP function directly.
SWAP
Used to interchange the main picture and the sub picture.
➢
P(
)
When the main picture is in the Video mode and
the sub picture is in the TV mode, you might not
hear the sound of main picture when pressing
the SWAP button after changing the sub
picture channel. At this time, reselect the channel
of main picture.
Used to select a channel of the sub picture.
Table of PIP Settings
X - This PIP combination is not available.
O - This PIP combination is available.
Main TV Ext. AV1 AV2 AV3 S-Video1 S-Video2 S-Video3 Component1 Component2
PC
HDMI
TV
O
O
O
O
O
O
O
O
O
O
O
O
Ext.
O
X
O
O
O
O
O
O
O
O
O
O
AV1
O
O
X
O
O
O
O
O
O
O
O
O
AV2
O
O
O
X
O
O
O
O
O
O
O
O
AV3
O
O
O
O
X
O
O
O
O
O
O
O
S-Video1
O
O
O
O
O
X
O
O
O
O
O
O
S-Video2
O
O
O
O
O
O
X
O
O
O
O
O
S-Video3
O
O
O
O
O
O
O
X
O
O
O
O
Component1
X
X
X
X
X
X
X
X
X
X
X
X
Component2
X
X
X
X
X
X
X
X
X
X
X
X
PC
X
X
X
X
X
X
X
X
X
X
X
X
HDMI
X
X
X
X
X
X
X
X
X
X
X
X
Sub
English - 39
BP68-00613D-00Eng
6/14/06
10:13 AM
Page 40
Using the Digital NR (Noise Reduction) Feature
TV
If the signal received by your television is weak, you can activate this
feature to help reduce any static and ghosting that may appear on the
screen.
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
Standard
16:9
On
Off
1
Result:
Off
2
Move
TV
Enter
Return
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Film Mode
:
PIP
Move
Standard
16:9
On Off
Off On
English - 40
Return
) button.
The main menu is displayed.
Press the … or † button to select Picture.
Result:
The Picture menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Digital NR.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
Off
Enter
Press the MENU (
) button.
Y
w
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 41
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
1
Press the MENU (
Result:
TV
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
) button.
The main menu is displayed.
: Custom
: Off
: Off
: Off
Press the ▲ or ▼ button to select Sound.
2
Result:
3
The Sound menu is displayed.
Press the ENTER (
Result:
Enter
Return
) button.
The Mode is selected.
4
Press the ENTER (
5
Select the required option by pressing the ▲ or ▼ button.
Result:
Move
TV
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
) button again.
The following options are available.
: Standard
Standard
Music
: OffMovie
: OffSpeech
: Off
Custom
Standard - Music - Movie - Speech - Custom
➢
◆ Choose Standard for the standard factory settings.
Move
Enter
◆ Choose Music when watching music videos or concerts.
◆ Choose Movie when watching movies.
◆ Choose Speech when watching a show that is mostly
dialog (i.e., news).
◆ Choose Custom to recall your personalized settings
(see “Customizing the Sound Settings”, page 42).
6
When you are satisfied with your setting, press the ENTER (
button.
7
Press the EXIT button to exit.
)
Custom
➢
You can select these options by simply pressing the
S.MODE (
: Sound Mode) button on the remote control.
English - 41
Return
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 42
Customizing the Sound Settings
TV
Your television has several settings which allow you to control the
sound quality.
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
: Custom
1
Press the MENU (
: Off
: Off
: Off
Result:
Result:
Enter
R
L
The main menu is displayed.
The Sound menu is displayed.
Return
Equalizer
TV
) button.
Press the … or † button to select Sound.
2
Move
Tr
m
su
in
+
+
0
0
-
-
3
Press the ENTER (
4
Press the … or † button to select Equalizer.
Press the ENTER (
) button.
Result:
) button.
The Equalizer menu is displayed.
5
Select the required option (balance or equalizer) by pressing the
œ or √ button.
6
Press the … or † button until you reach the optimal setting.
Press the ENTER (
) button.
7
Press the EXIT button to exit.
100Hz 300Hz 1KHz 3KHz 10KHz
Move
Adjust
Return
➢
➢
If you make any changes to the sound settings, the sound
standard is automatically switched to Custom.
◆ L/R Sound Balance Adjustment
To adjust the sound balance of the L/R speakers.
◆ Bandwidth Adjustment (100Hz, 300Hz, 1KHz, 3KHz, 10KHz)
To adjust the level of different bandwidth frequencies.
'E
d
vo
au
so
o
English - 42
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 43
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1
multichannel content over two speakers. TruSurround delivers a compelling, virtual
surround sound experience through any two-speaker playback system, including
internal television speakers. It is fully compatible with all multichannel formats.
1
Press the MENU (
Result:
TV
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
) button.
The main menu is displayed.
: Off
: Off
: Off
Press the … or † button to select Sound.
2
Result:
Move
The Sound menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select SRS TSXT.
Press the ENTER (
) button.
5
Select the required option by pressing the … or † button.
The following options are available.
Result:
Off - 3D Mono - Stereo
6
When you are satisfied with your setting, press the ENTER (
button.
7
Press the EXIT button to exit.
➢
➢
Enter
Return
) button.
TV
z)
: Custom
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
)
Move
: Custom
: Off Off
: Off3D Mono
: OffStereo
Enter
Return
You can select these options simply by pressing the
SRS (
) button on the remote control.
TruSurround XT, SRS and
Symbol are
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from
SRS Labs, Inc.
Adjusting the Volume Automatically
'Each broadcasting station has its own signal conditions, the volume level
differs between stations, therefore it is an inconvenience to adjust the
volume every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by raising the sound
output when the modulation signal is low.
1
Press the MENU (
Result:
2
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
) button.
Move
: Custom
: Off
: Off
: Off
Enter
Return
The main menu is displayed.
Press the … or † button to select Sound.
Result:
TV
The Sound menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Auto Volume.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
) button.
TV
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
Move
: Custom
: Off
: Off Off
: Off On
Enter
English - 43
Return
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 44
Selecting the Internal Mute
TV
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
: Custom
1
Press the MENU (
: Off
: Off
: Off
Result:
Result:
Enter
TV
Move
The Sound menu is displayed.
Return
3
Press the ENTER (
4
Press the … or † button to select Internal Mute.
Press the ENTER (
) button.
: Off
: Off
: Off Off
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
On
6
Press the EXIT button to exit.
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
The main menu is displayed.
Press the … or † button to select Sound.
2
Move
) button.
: Custom
Enter
Return
➢
) button.
The VOL +, VOL - and MUTE ( ) buttons do not operate when
the Internal Mute is set to On.
Setting the Melody Sound
TV
Move
TV
: English
1
2
Enter
Move
Enter
English - 44
Off
On
Return
) button.
The main menu is displayed.
Press the … or † button to select Setup.
Result:
Return
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Melody.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
: English
: Off
: Off
: Off
Press the MENU (
Result:
: Off
: On
: Off
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
➢
You can hear melody sound when you switch the television on
or off.
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
T
o
a
th
) button.
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 45
Selecting the Sound Mode (depending on the model)
The DUAL I-II button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I” or “Stereo”, depending on
the current transmission.
NICAM
Stereo
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
NICAM Mono ↔ Mono
NICAM stereo
A2
Stereo
NICAM DUAL-I/II
NICAM DUAL-I →
NICAM DUAL-II →
Mono
Regular broadcast
(Standard audio)
Mono
Bilingual or DUAL-I/II
DUAL-I ↔ DUAL-II
Stereo
➢
NICAM stereo ↔ Mono
(Forced mono)
Stereo ↔ Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to Mono.
◆ If the stereo signal is weak and automatic switching
occurs, switch to Mono.
◆ When receiving mono sound in AV mode, connect to the
AUDIO-L input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the DUAL I-II button.
English - 45
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 46
Setting and Displaying the Current Time
TV
You can set the television’s clock so that the current time is displayed
by pressing the INFO (
) button. You must also set the time if you
wish to use the automatic on or off timers.
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
Move
TV
: English
1
: Off
: On
: Off
Enter
Result:
Move
TV
12 : 00 am
: Off
-- : -- am Off
-- : -- am Off
Enter
) button.
The main menu is displayed.
Press the … or † button to select Setup.
2
Return
Time
Clock Set
Sleep Timer
On Timer
Off Timer
Press the MENU (
Result:
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Time.
Press the ENTER (
) button.
Result:
) button.
The Clock Set is selected.
5
Press the ENTER (
6
Press the œ or √ button to select Hour, Minute, or am/pm.
Set these by pressing the … or † button.
Return
➢
) button again.
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
Clock Set
Hour
Minute
am/pm
12
00
am
Move
Adjust
English - 46
Return
7
When you are satisfied with your setting, press the ENTER (
button.
8
Press the EXIT button to exit.
➢
)
In the event of a power interruption or the set being turned off at
the supply, the settings for the Clock will be lost.
Y
w
d
u
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 47
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
1
Press the MENU (
Result:
TV
) button.
The main menu is displayed.
Press the … or † button to select Setup.
2
Result:
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Time.
Press the ENTER (
) button.
Result:
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
: Off
: On
: Off
Move
Enter
Return
) button.
TV
Press the … or † button to select Sleep Timer.
Press the ENTER (
) button.
6
Select the preset time interval (Off, 30, 60, 90, 120, 150, or 180)
for staying on by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
7
Press the EXIT button to exit.
Time
Clock Set
Sleep Timer
On Timer
Off Timer
The Time menu is displayed.
5
◆ You can select these options simply by pressing the
SLEEP button on the remote control.
◆ If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the remaining time before
which the television switches to standby mode is displayed.
12 : 00 am
: Off
-- : -- am Off
-- : -- am Off
Move
TV
➢
: English
Enter
Return
Time
Clock Set
Sleep Timer
On Timer
Off Timer
: 00 : 00
Off
: Off
30
60Off
: 00 : 00
90Off
: 00 : 00
120
150
180
Move
Sleep Timer
Enter
:
Off
English - 47
Return
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 48
Switching the Television On and Off Automatically
TV
You can set the on or off timers so that the television will:
Setup
Plug & Play
Language
Time
Child Lock
Blue Screen
Melody
Panel Lock
PC
◆ Switch on automatically and tune to the channel of your
choice at the time you select.
: English
◆ Switch off automatically at the time you select.
➢
: Off
: On
: Off
Move
Enter
Return
1
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on page 46).
Press the MENU (
Result:
TV
) button.
The main menu is displayed.
Time
Clock Set
Sleep Timer
On Timer
Off Timer
12 : 00 am
: Off
-- : -- am Off
-- : -- am Off
Move
Enter
2
Press the … or † button to select Setup.
Result:
3
Press the ENTER (
4
Press the … or † button to select Time.
Press the ENTER (
) button.
Return
Result:
TV
5
On Timer
Hour
Minute
am/pm
12
00
am
The Setup menu is displayed.
) button.
The Time menu is displayed.
Press the … or † button to select On Timer.
Press the ENTER (
) button.
Result:
The On Timer menu is displayed.
Programme
6
01
Volume
Activation
10
No
Move
TV
Adjust
➢
Return
On Timer
Hour
Minute
am/pm
12
00
am
01
Activation
10
Yes
Move
Adjust
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
7
Press the œ or √ button to select Activation.
8
To activate On Timer with the setting entered, select Yes by
pressing the … or † button.
9
Press the ENTER (
Programme
Volume
Select Hour, Minute, am/pm, Programme, or Volume by pressing the
œ or √ button.
Set these by pressing the … or † button.
Result:
) button.
The Time menu is displayed again.
Return
continued...
English - 48
BP68-00613D-00Eng
10
10:14 AM
Page 49
Press the … or † button to select Off Timer.
Press the ENTER (
) button.
Result:
11
6/14/06
The Off Timer menu is displayed.
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
12
Press the œ or √ button to select Activation.
13
To activate Off Timer with the setting entered, select Yes by
pressing the … or † button.
15
Time
Clock Set
Sleep Timer
On Timer
Off Timer
Select Hour, Minute, or am/pm by pressing the œ or √ button.
Set these by pressing the … or † button.
➢
14
TV
Move
TV
When you are satisfied with your setting, press the ENTER (
button.
)
When you set the timer “On”, the television will eventually turn
off, if no controls are operated for 3 hours after the TV was turned
on by timer. This function is only available in timer “On” mode
and prevents overheating, which may occur if a TV is on for
too long.
➢
Return
Hour
Minute
am/pm
12
00
am
Activation
No
Press the EXIT button to exit.
Auto Power Off
Enter
Off Timer
Move
➢
12 : 00 am
: Off
12 : 00 am On
-- : -- am Off
TV
Adjust
Return
Off Timer
Hour
Minute
am/pm
12
00
am
Activation
Yes
If no signal is received for 15 minutes, the TV will be
automatically turned off.
Move
Adjust
English - 49
Return
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 50
Viewing an External Signal Source
TV
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top box, and the TV
source (broadcast or cable).
Input
Source List
M
te
: TV
Edit Name
1
Press the MENU (
Result:
2
Move
TV
Enter
TV
Ext.
AV1
AV2
AV3
S-Video1
S-Video2
More
Move
Result:
3
Source List
-------------------
Enter
) button.
The Source List is selected.
Press the … or † button to select the signal source, press the
ENTER (
) button.
4
Result:
➢
Return
5
The available signal sources are listed.
◆ TV, Ext., AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, or HDMI : on the TV’s rear panel.
◆ AV3, S-Video3 : on the TV’s side panel.
◆ You can also set these options simply by pressing the
SOURCE (
) button on the remote control.
◆ Only connected devices can be selected
Press the MENU (
Result:
6
) button.
The main menu is displayed.
Press the ENTER (
Result:
TV
) button to select Input.
The Input menu is displayed.
Press the ENTER (
Result:
:
:
:
:
:
:
The main menu is displayed.
Press the ENTER (
Return
) button.
) button to select Input.
The Input menu is displayed agian.
Input
Source List
: TV
7
Press the … or † button to select Edit Name.
Press the ENTER (
) button.
8
Press the … or † button to select external source to be edited.
Press the ENTER (
) button.
Edit Name
Result:
Move
TV
Enter
The available device names are listed.
VCR, DVD, D-VHS, Cable STB, HD STB, Satellite
STB, AV Receiver, DVD Receiver, Game, Camcorder,
DVD Combo, DHR (DVD HDD Recorder), or PC
Return
Edit Name
Ext.
AV1
AV2
AV3
S-Video1
S-Video2
S-Video3
More
Move
:
:
:
:
:
:
:
- - ---- - - - - -VCR
- - - -DVD
---D-VHS
---Cable STB
-------
Enter
English - 50
Return
9
Select the required device by pressing the … or † button.
Press the ENTER (
) button.
10
Press the EXIT button to exit.
➢
If you change the external source while viewing, pictures
might take a short period of time to switch.
T
V
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 51
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
➢
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
English - 51
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 52
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service by pressing the
P or button.
2
Press the TTX/MIX (
Result:
3
English - 52
The contents page is displayed. It can be redisplayed at
any time by pressing the
(index) button.
Press the TTX/MIX (
Result:
) button to activate the teletext mode.
) button again.
The screen will be split into two. This Double Teletext
feature lets you view the actual broadcast and teletext
information separately on the screen.
4
If you wish to display the actual broadcast and teletext information
on a single screen, press the TTX/MIX (
) button again.
5
To exit from the teletext display, press the TV button.
W
o
n.
t
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 53
Selecting Display Options
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
Press the...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page
(sub-page)
◆ The broadcast when searching for a page
(cancel)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
➢ To return to the normal display after using the reveal or
size feature, press the TV button.
English - 53
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 54
Selecting a Teletext Page
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
2
The current page counter is incremented and the page
is then displayed. If the selected page is linked with
several secondary pages, the secondary pages are
displayed in sequence. To freeze the display on a
given page, press the
(hold) button. Press it again
to resume.
If the FASTEXT system is used by a broadcasting company, the
different topics covered on a Teletext page are colour-coded and
can be selected by pressing the coloured buttons on the remote
control.
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given in the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the sub-page, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available sub-pages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
pressing the
or
button.
5
English - 54
When you have finished, press the TV button to return to your
normal broadcast.
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 55
Connecting to the External Input/Output
Side of the TV
Rear of the TV
(depending on the model)
(Input)
(Input/Output)
VCR
③
(SP56K3HX / (SP50L6HX / SP56L6HX / SP61L6HX
SP61K3HX) / SP67L6HX)
①
e
➃
Decoder /
Video game device
Video disc player
②
h
or
Satellite receiver
or
➄
① This end can be fitted with:
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
② This end can be fitted with:
③
➃
➄
➢
◆ A SCART connector
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
◆ An S-Video connector and two audio RCA connectors (L+R)
If you have a second VCR and wish to copy cassettes tape, connect the source VCR to AV IN 1 (AV
IN 2 or AV IN 3) and the target VCR to AV OUT so that you can redirect the signal from source VCR
to target VCR.
If you have a decoder, connect the decoder to the VCR and the VCR to the television.
When you wish to record a programme, connect the receiver to AV IN 1 (AV IN 2 or AV IN 3) and the
VCR to AV OUT so that you can redirect the signal from AV IN 1 (AV IN 2 or AV IN 3) to AV OUT.
Scart supports only TV signal output.
AV OUT
Viewing Source
Audio
Video
TV
Available.
Available.
Ext.
Available. (RF)
Available. (RF)
AV1/AV2/AV3
Available.
Available.
S-Video1/S-Video2/S-Video3
Available.
Available. (Mixed Video)
Component1/ Component2/PC/HDMI
Not available.✽
Not available.
✽ It is available when the Internal Mute is set to On. For details, refer to “Selecting the Internal Mute”
on page 44.
English - 55
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 56
Connecting to the RCA Input
➢
The RCA (VIDEO + AUDIO L /R) connectors are used for equipment, such as camcorders, video disc
players, and some video game devices.
Side of the TV
Rear of the TV
(depending on the model)
(Input)
(Input/Output)
Camcorder
(SP56K3HX / (SP50L6HX / SP56L6HX / SP61L6HX
SP61K3HX) / SP67L6HX)
Video game device
Video disc player
➢
Please be sure to match the colour coded input terminals and cable jacks.
Connecting to the S-Video Input
➢
The S-VIDEO and AUDIO L /R connectors are used for equipment with an S-Video output, such as a
camcorder or VCR.
Side of the TV
Rear of the TV
(depending on the model)
(Input)
(Input/Output)
Camcorder
①
(SP56K3HX / (SP50L6HX / SP56L6HX / SP61L6HX
SP61K3HX) / SP67L6HX)
and
VCR
① To play pictures and sound, both the S-VIDEO (1, 2, or 3) and AUDIO L /R connectors must be used.
➢
Please be sure to match the colour coded input terminals and cable jacks.
☛
English - 56
Whenever you connect an audio or video system to your television,
ensure that all elements are switched off. Refer to the documentation
supplied with your equipment for detailed connection instructions
and associated safety precautions.
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 57
Connecting to the Component Input
Rear of the TV
①
②
DVD
DTV receiver
① The COMPONENT IN 1 (or COMPONENT IN 2) connectors are used for equipment with a
DVD or DTV receiver output. (480i, 480p, 576i, 576p, 720p, 1080i)
➢
Please be sure to match the colour coded input terminals and cable jacks.
Connecting to the PC Input
➢
The PC IN (video) and AUDIO connectors are used for interfacing with your PC.
Rear of the TV
Personal Computer
and
n
English - 57
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 58
Connecting to the HDMI (High Definition Multimedia Interface) Input
➢
The HDMI/DVI IN connector is used for equipment with an HDMI out.
Rear of the TV
DTV Set-Top Box
Connecting to the HDMI/DVI Compatible
➢
The HDMI/DVI IN connector is used for equipment with a DVI out.
Rear of the TV
DTV Set-Top Box
and
(HDMI/DVI cable)
English - 58
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 59
Connecting Home Theater System
Use the AV OUT ports of the TV for Home Theater System Connections.
Rear of the TV
①
Connecting the Home Theater System
① Connect the monitoring audio out L and R jacks of the AV OUT
on the rear-side connection panel of the TV to the AUDIO IN
jacks of the DVD Home Theater System (or AV Receiver) using
the audio cable.
DVD Home Theater
②
② Press the SOURCE (
) button to select the desired external
device connected to the TV.
AV Receiver Amplifier
③ If you want to hear the sound through separate speakers,
cancel the internal amplifier.
➢
Please be sure to match the colour coded input terminals and cable jacks.
☛
◆ Refer to corresponding user’s manual from the manufacturer for wiring the
speakers to the DVD Home Theater System (or AV Receiver).
◆ Disable the TV internal speaker to enjoy the rich sound through the
speakers of your Home Theater System.
To Display the DVD Home Theater
! Turn the TV on and press the SOURCE (
Component (1, 2).
) button to select the AV1 (AV2 or AV3) or
@ Be sure to connect the video cable properly if desired external input AV1 (AV2 or AV3) or
Component (1, 2) cannot be selected.
# Play the DVD after activating the DVD Home Theater System.
$ Use the volume control of the Home Theater System while watching the TV using the DVD Home
Theater, where the TV does not produce the audio.
English - 59
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 60
Setting up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
B
T
1 Right click the mouse on the Windows Desktop,
then click on Properties.
The Display Properties will be displayed.
2 Click on Settings tab, then set the Display Mode
with reference to the Display Modes Table.
You do not need to change the Colours settings.
3 Click on Advanced. A new settings dialog box
◆
will be displayed.
2
4 Click on the Monitor tab, then set the Screen
refresh rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal
Frequency individually if you can do so instead of
setting the Screen refresh rate.
3
5 Click on OK to close the window, then Click on
OK button to the Display Properties window.
Automatic re-booting may commence at this
moment.
◆
◆
◆
◆
6 Shutdown the PC, and connect it to your TV.
(“Connecting to the PC Input” on page 57)
4
5
English - 60
➢
◆ The actual screens on your PC may look
different, depending on your particular
version of Windows and the type of your
PC.
◆ When you use your TV as a PC monitor, it
supports Colours up to 32 bits.
◆ In this case, the display on the TV may look
different depending on your particular
version of Windows or the PC
manufacturer.
◆ When connecting a PC you must set it to
the display settings that are supported by
the TV. Otherwise, the message Out of
input range will be displayed.
◆
◆
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 61
PC Input Mode
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Standard
Resolution
VGA
720 x 400
640 x 480
SVGA
800 x 600
XGA
832 x 624
1024 x 768
SXGA
1280 x 720
Horizontal
frequency (KHz)
Vertical
frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
31.47
31.47
35.00
37.86
37.50
43.27
35.16
37.88
48.08
46.87
53.67
49.73
48.36
56.40
57.80
60.02
44.70
70.00
60.00
66.70
72.80
75.00
85.00
56.30
60.30
72.20
75.00
85.10
74.60
60.00
70.10
72.00
75.00
59.80
28.322
25.175
30.24
31.50
31.50
36.00
36.00
40.00
50.00
49.50
56.25
57.284
65.00
75.00
74.99
78.75
74.50
-/-/+
-/-/-/-/-+/+/++/+
+/+
+/+
-/+
-/-/-/+/-/+
◆ The interlace mode is not supported.
Notes
◆ 1280 x 720 mode is 16:9 mode.
◆ When this television is used as a PC display, 24-bit colour is supported (over 16 million colours).
◆ Your PC display screen might appear different depending on the manufacturer (and your particular version of
Windows). Check your PC instruction book for information about connecting your PC to a television.
◆ If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).
In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned
off (or if the PC is disconnected). If so, press the SOURCE (
) button to enter the Video mode. Also, make
sure that the PC is connected.
◆ When connecting a notebook PC to the television, make sure that the PC screen is displayed through only the
television (Otherwise, random signals might appear). It depends on the note PC model.
◆ When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable
connections.
English - 61
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 62
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate
in five different modes: TV, VCR, Cable, DVD, or Set-Top Box.
Pressing the corresponding button on the remote control allows
you to switch between these modes, and control whichever piece
of equipment you choose.
➢
Se
The remote control might not be compatible with all
DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1
Turn off your VCR.
2
Press the VCR button on your TV’s remote control.
3
Press the SET button on your TV’s remote control.
4
Using the number buttons on your remote control, enter three digits
of the VCR code listed on page 64 of this manual for your brand of
VCR. Make sure you enter three digits of the code, even if the first
digit is a “0”. (If more than one code is listed, try the first one.)
5
Press the POWER button on the remote control. Your VCR should
turn on if your remote is set up correctly.
If your VCR does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of VCR. If no
other codes are listed, try each VCR code, 000 through 080.
➢
➢
◆ Note on Using Remote Control Modes: VCR
◆ When your remote control is in “VCR” mode, the volume
buttons still control your TV’s volume.
Setting Up the Remote to Operate Your Cable Box
1
Turn off your cable box.
2
Press the CABLE button on your TV’s remote control.
3
Press the SET button on your TV’s remote control.
4
Using the number buttons on your remote control, enter three digits of
the cable box code listed on page 65 of this manual for your brand of
cable box. Make sure you enter three digits of the code, even if the
first digit is a “0”. (If more than one code is listed, try the first one.)
5
Press the POWER button on the remote control. Your cable box
should turn on if your remote is set up correctly.
If your cable box does not turn on after set-up, repeat steps 2, 3
and 4, but try one of the other codes listed for your brand of cable
box. If no other codes are listed, try each code, 000 through 046.
➢
➢
◆ Note on Using Remote Control Modes: Cable Box
◆ When your remote control is in “CABLE” mode, the
volume buttons still control your TV’s volume.
continued...
English - 62
Se
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 63
Setting Up the Remote to Operate Your DVD
1
Turn off your DVD.
2
Press the DVD button on your TV’s remote control.
3
Press the SET button on your TV’s remote control.
4
Using the number buttons on your remote control, enter three digits
of the DVD code listed on page 66 of this manual for your brand of
DVD. Make sure you enter three digits of the code, even if the first
digit is a “0”. (If more than one code is listed, try the first one.)
5
Press the POWER button on the remote control. Your DVD should
turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of DVD. If no
other codes are listed, try each code, 000 through 141.
➢
➢
d
◆ Note on Using Remote Control Modes: DVD
◆ When your remote control is in “DVD” mode, the volume
buttons still control your TV’s volume.
,
of
f
Setting Up the Remote to Operate Your Set Top Box
1
Turn off your STB.
2
Press the STB button on your TV’s remote control.
3
Press the SET button on your TV’s remote control.
4
Using the number buttons on your remote control, enter three digits
of the STB code listed on page 65 of this manual for your brand of
STB. Make sure you enter three digits of the code, even if the first
digit is a “0”. (If more than one code is listed, try the first one.)
5
Press the POWER button on the remote control. Your STB should
turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4,
but try one of the other codes listed for your brand of STB. If no
other codes are listed, try each code, 000 through 074.
➢
➢
◆ Note on Using Remote Control Modes: STB
◆ When your remote control is in “STB” mode, the volume
buttons still control your TV’s volume.
English - 63
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 64
Remote Control Codes
VCR
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
018 024 028 029 048 051 061
FISHER
025
FUNAI
GENERAL ELECTRIC 002 005 017 021 056
002
GO VIDEO
006 007 008 009 010
LG(Goldstar)
HARMAN KARDON 007
019 025 041 042 074
HITACHI
021
INSTANT REPLAY
002 007 018 019 021 026 037 041 054 056
JC PENNEY
007 008 018 021 026 037
JCL
007 008 018 026 037
KENWOOD
070
KLH
025
LIOYD
038
LOGIK
LXI
025
JVC
081 082 083
MAGNAVOX
021 056 059
MARANTZ
007 008 018 021 026 037 062
MARTA
006
KONIA
036
ORION
073 074 075 076
MEI
021
MEMOREX
006 021 024 025
MGA
034
MIDLAND
005
MINOLTA
019 041 075
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
C
Brand
MITSUBISHI
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
Code
019 034 041 046
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
023 027 033
continued...
English - 64
B
S
G
H
H
J
M
M
O
P
P
P
R
R
S
P
G
S
C
S
S
S
B
A
A
C
C
C
D
D
D
D
D
D
E
E
G
G
G
H
H
H
H
IQ
IQ
J
J
J
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 65
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001 002 003 004 005 006 007
041
003 024 031
025 030
038 039
025 030
019 023 028
026
003 022 027 037 044
019 021 023 028
004 018 020 044
014 022 040
003
Brand
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WAMER AMEX
ZENITH
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SAMSUNG SET-TOP BOX
Product
Ground wave STB
Satellite STB
CABLE STB
STB DVD COMBO
Satellite STB HDD COMBO Standard
Code
001 002
003
004
008
009
Product
Satellite STB HDD COMBO Premium
CABLE STB HDD COMBO Standard
CABLE STB HDD COMBO Premium
Ground wave STB HDD COMBO Standard
Ground wave STB HDD COMBO Premium
Code
010
011
012
013
014
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
Code
023
043
018 034
019
035
015 016 017 019 022 045 060 061 062 065
066 067 068
DAEWOO
074
DISH NETWORK SYSTEM 069 070
DISHPRO
069
DRAKE
018 024 032
DX ANTENNA
027
ECHOSTAR
025 069 070 071
EXPRESSVU
069
GOI
069
GE
065
GENERAL INSTRUMENT 046 047 048 063 064
HTS
069
HOME CABLE
056
HITACHI
022
HUGHES NETWORK 015 017
IQ
020
IQ PRISM
020
JANEIL
059
JERROID
063
JVC
069 070
Brand
LG(Goldstar)
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STS
STAR TRAK
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
Code
044 073
016 021 036 038 039 040 041 042
016
064
018
015
047 048 064
015 016 017 021 033 036 038 039 040 041 042 067
046 049 050 063
058 059 061 062
016
065 066
051 052 053 065 066
064
057
020 027
026
031
005 006 007
064
064
054 060
015 017 028 029 030 072
060 066
016 021 037 055 056 057
024 031 068
continued...
English - 65
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 66
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Record COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
014 015 016
017
018
019
020
021
Code
030
075
085
072
070 071 074 086 083 084 088 111 112
114
062
074
122 123
027
065 077 078 079 082
080 125
081
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
092
091
022 033 115 116
073
051 108 109
073
059 100 106 107
074 075
025 031
057
058
054
055
056
076 093
074 094
073
Brand
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
SANYO
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
048 049 050
052
053
144
074
105
072
076 092 119
044 045
046 047
023
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129 130 141
039 041
042
043 093
140
062
062
094
090
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
English - 66
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 67
Replacing the Lamp
1
Unplug TV, then use a screwdriver to remove the screw.
2
Remove the Lamp cover.
3
Remove the Lamp cover duct holding the locker and pulling it out.
4
Remove the screw securing the Lamp by using a screwdriver.
5
Separate the Lamp from the engine by holding the handle and
pulling it out.
6
To reinstall the Lamp, follow these steps in reverse order.
◆ Why do I need to replace the lamp?
The lamp used in a projection TV has a limited lifespan. For
the best screen quality it needs to be replaced periodically.
After replacing the lamp, the screen quality willbe bright and
clear as new.
◆ When do I need to replace it?
It should be replaced when the screen becomes darker, less
clear or when all three LEDs on the front (TIMER, LAMP and
STAND BY/TEMP) are flashing.
◆ Check before lamp replacement
- Turn the power off and wait for 30 minutes before
replacing the lamp as it will be hot.
- The lamp must be the same code to avoid damage to the
TV. The lamp code is indicated on the lamp case or the
side of TV.
- After checking the lamp code, give to the store where you
purchased the TV or to a Samsung Service Center.
◆
Caution
- Do not touch the glass part of the lamp with your bare
hands nor insert any foreign object inside the cover as it
may cause poor screen quality, electric shock or fire.
- Do not place the old lamp near flammable objects or
within the reach of children.
- Don't allow dirt or dust to accumulate inside the lamp
cover or on the lamp. A dirty cover or lamp can catch fire,
explode and cause electric shock.
- If a new lamp is improperly handled, the screen quality
can be affected and the expected lifespan of the lamp can
be reduced.
- Be sure to tighten the lamp cover on the TV after changing
the lamp. Note that the TV will not function if the lamp
cover is not securely attached. Please tighten the holding
screw on the lamp cover after it has been attached to the
TV.
English - 67
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 68
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
Normal picture but no sound
No picture or black and white picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the power button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check if Internal Mute is set to ON.
◆ Check the volume.
◆ Check whether the volume MUTE (
has been pressed.
) button on the remote control
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
Screen is black and power indicator
light blinks steadily
◆ On your computer check; Power, Signal Cable.
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press any key on the keyboard.
English - 68
T
A
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆
◆
◆
◆
T
su
On your equipment check (STB, DVD, etc) ; Power, Signal Cable.
The TV is using its power management system.
Press the SOURCE (
) button on the panel or remote control.
Turn the TV off and on.
W
l
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 69
Technical Specifications
The descriptions and characteristics in this booklet are given for information purposes only and are
subject to modification without notice.
Model name
SP50L6HX
SP56L6HX
Colour systems
Dimensions
(W x D x H)
Weights
SP61K3HX
SP61L6HX
SP67L6HX
PAL, SECAM, NTSC3.58, NTSC4.43
TV standards
Audio output power
SP56K3HX
BG, DK, I, M
15 W + 15 W
10 W + 10 W
15 W + 15 W
1182 x 354 x
869.7 mm
1330 x 388.5 x
961.7 mm
1292 x 415 x
906 mm
1540 x 570 x
1102 mm
1446 x 466.5 x
1056.2 mm
1584 x 502.5 x
1144.5 mm
31.5 kg
35.1 kg
33.3 kg
36 kg
41.4 kg
47.5 kg
,
English - 69
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 70
This page is intentionally
left blank.
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 71
This page is intentionally
left blank.
BP68-00613D-00Eng
6/14/06
10:14 AM
Page 72
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
AUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
SOUTH AFRICA
TAIWAN
THAILAND
U.A.E
VIETNAM
Customer Care Centre 1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282, 1600 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
0860 7267864 (SAMSUNG)
0800-329-999
1800-29-3232, 02-689-3232
800SAMSUNG (7267864)
1 800 588 889
Web Site
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/za
www.samsung.com/tw
www.samsung.com/th
www.samsung.com/mea
www.samsung.com/vn
BP68-00613D-00