Sony KLV-40R352D Operating Instructions

D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\010COV.fm
Television
Operating Instructions
masterpage: Cover
Parts and Controls
Watching TV
Navigating through Home Menu
Viewing Pictures from Connected
Equipment
Additional Information
KLV-40R352D / 32R302D
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\010COVTOC.fm
masterpage: Left
Table of Contents
Safety Information . . . . . . . . . . . . . . . . . . . . . 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Parts and Controls
TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote Control . . . . . . . . . . . . . . . . . . . . . 8
Viewing Pictures from
Connected Equipment
Connection Diagram . . . . . . . . . . . . . . . . 20
Using Audio and Video Equipment . . . . . 21
Additional Information
Watching TV
Changing the Viewing Style . . . . . . . . . . 10
Changing the Wide Mode . . . . . . . . . . . . . . 10
Setting Scene Select . . . . . . . . . . . . . . . . . . . 10
Navigating through Home
Menu
Installing the TV to the Wall . . . . . . . . . . .22
Troubleshooting . . . . . . . . . . . . . . . . . . . .25
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Specifications . . . . . . . . . . . . . . . . . . . . . 26
Favourites . . . . . . . . . . . . . . . . . . . . . . . . . .11
Applications . . . . . . . . . . . . . . . . . . . . . . . .11
Using the TV as a Photo Frame Mode. . . . . 11
Listening to FM Radio. . . . . . . . . . . . . . . . . . 12
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playback Photo/Music/Video via USB . . . . 12
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
System Settings . . . . . . . . . . . . . . . . . . . . . . 14
Customer Support . . . . . . . . . . . . . . . . . . . . 19
2GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\020REG.fm
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly and
retain it for future reference.
Note
• Before operating the TV, please read the “Safety Information”
(page 3).
• Instructions about “Installing the TV to the Wall” are included
within this TV’s instructions manual.
• Images and illustrations used in Startup Guide and this manual
are for reference only and may differ from actual product.
masterpage: Right
• Only qualified service personnel should carry out wall-mount
installations.
• For safety reasons, it is strongly recommended that you use
Sony accessories, including:
Wall-Mount Bracket: SU-WL450
• Be sure to use the screws supplied with the Wall-Mount Bracket
when attaching the Mounting Hooks to the TV set. The supplied
screws are designed as indicated by illustration when measured
from the attaching surface of the Mounting Hook.
The diameter and length of the screws differ depending on the
Wall-Mount Bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
Location of the identification label
8 mm - 12 mm
GB
Labels for the TV Model No. and Power Supply rating are located
on the rear of the TV.
Labels for the AC adapter Model No. and Serial No. are located on
the bottom of the AC adapter.
Screw (supplied with the
Wall-Mount Bracket)
Mounting Hook
Hook attachment on rear
of TV set
Safety Information
WARNING
Batteries must not be exposed to excessive heat such as
sunshine, fire or the like.
Never place a television set in an unstable location. A television
set may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as:
 Using cabinets or stands recommended by the manufacturer
of the television set.
 Only using furniture that can safely support the television set.
 Ensuring the television set is not overhanging the edge of the
supporting furniture.
 Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the television set to a suitable support.
 Not placing the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
 Educating children about the dangers of climbing on furniture
to reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.
Installation/Set-up
Install and use the TV set in accordance with the instructions
below in order to avoid any risk of fire, electric shock or damage
and/or injuries.
Transporting
• Before transporting the TV set, disconnect all cables.
• Two or three people are needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown below.
Do not put stress on the LCD panel and the frame around the
screen.
• When transporting the TV set, do not subject it to jolts or
excessive vibration.
• When transporting the TV set for repairs or when moving, pack
it using the original carton and packing material.
Ventilation
• Never insert anything in the cabinet.
• Leave space around the TV set as shown below.
• It is strongly recommended that you use a Sony Wall-Mount
Bracket in order to provide adequate air circulation.
Installed on the wall
30 cm
Installation
• The TV set should be installed near an easily accessible AC
power outlet (mains socket).
• Place the TV set on a stable, level surface to prevent it from
falling over and causing personal injury or property damage.
• Install the TV so that the TV's Table-Top Stand does not
protrudes out from the TV stand (not supplied). If the Table-Top
Stand protrudes out from the TV stand, it may cause TV set to
topple over, fall down, and cause personal injury or damage to
the TV.
10 cm
10 cm
10 cm
Leave at least this space around the set.
Installed with stand
30 cm
10 cm
10 cm
6 cm
Leave at least this space around the set.
3GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\020REG.fm
• To ensure proper ventilation and prevent the collection of dirt or
dust:
 Do not lay the TV set flat, install upside down, backwards, or
sideways.
 Do not place the TV set on a shelf, rug, bed or in a closet.
 Do not cover the TV set with a cloth, such as curtains, or items
such as newspapers, etc.
 Do not install the TV set as shown below.
Air circulation is blocked.
Wall
masterpage: Left
• Do not touch the AC adapter with wet hands.
• If you notice an abnormality in the AC adapter, disconnect it
from the AC power outlet (mains socket) immediately.
• The set is not disconnected from the AC source as long as it is
connected to the AC power outlet (mains socket), even if the set
itself has been turned off.
• As the AC adapter will become warm when it is used for a long
time, you may feel hot when touching it by hand.
Prohibited Usage
Wall
Do not install/use the TV set in locations, environments or
situations such as those listed below, or the TV set may
malfunction and cause a fire, electric shock, damage and/or
injuries.
Locations:
• Outdoors (in direct sunlight), at the seashore, on a ship or other
vessel, inside a vehicle, in medical institutions, unstable
locations, near water, rain, moisture or smoke.
Environments:
AC power cord (mains lead)
Handle the AC power cord (mains lead) and outlet (mains socket)
as follows in order to avoid any risk of fire, electric shock or
damage and/or injuries:
 The shape of AC power plug (mains plug), which is supplied
with the TV set, varies depending on the region. Be sure to
connect the appropriate supplied AC power cord (mains lead)
with the plug that fits into the AC power outlet (mains socket).
 Use only Sony supplied AC power cords (mains lead), not those
of other brands.
 Insert the plug fully into the AC power outlet (mains socket).
 Operate the TV set on a 100 V - 240 V AC supply only.
 When wiring cables, be sure to unplug the AC power cord
(mains lead) for your safety and take care not to catch your feet
on the cables.
 Disconnect the AC power cord (mains lead) from the AC power
outlet (mains socket) before working on or moving the TV set.
 Keep the AC power cord (mains lead) away from heat sources.
 Unplug the AC power plug (mains plug) and clean it regularly. If
the plug is covered with dust and it picks up moisture, its
insulation may deteriorate, which could result in a fire.
Note
• Do not use the supplied AC power cord (mains lead) on any
other equipment.
• Do not pinch, bend, or twist the AC power cord (mains lead)
excessively. The core conductors may be exposed or broken.
• Do not modify the AC power cord (mains lead).
• Do not put anything heavy on the AC power cord (mains lead).
• Do not pull on the AC power cord (mains lead) itself when
disconnecting the AC power cord (mains lead).
• Do not connect too many appliances to the same AC power
outlet (mains socket).
• Do not use a poor fitting AC power outlet (mains socket).
NOTE ON AC ADAPTER
Warning
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To prevent fire or shock hazard, do not place objects filled with
liquids, such as vases, on the apparatus.
Do not install this equipment in a confined space, such as a
bookshelf or similar unit.
• Please ensure that the AC power outlet (mains socket) is
installed near the equipment and shall be easily accessible.
• Be sure to use the supplied AC adapter and AC power cord
(mains lead). Otherwise it may cause a malfunction.
• Connect the AC adapter to an easily accessible AC power outlet
(mains socket).
• Do not coil the AC power cord (mains
lead) around the AC adapter. The core
wire may be cut and/or it may cause a
malfunction of the TV.
• Places that are hot, humid, or excessively dusty; where insects
may enter; where it might be exposed to mechanical vibration,
near flammable objects (candles, etc). The TV set shall not be
exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the TV.
Situations:
• Use when your hands are wet, with the cabinet removed, or
with attachments not recommended by the manufacturer.
Disconnect the TV set from AC power outlet (mains socket) and
antenna during lightning storms.
• Install the TV so that it sticks out into an
open space. Injury or damage from a
person or object bumping into the TV
may result.
• Place the TV in a humid or dusty space,
or in a room with oily smoke or steam
(near cooking tables or humidifiers).
Fire, electric shock, or warping may
result.
• Install the TV in places subject to extreme temperature, such as
in direct sunlight, near a radiator or a heating vent. The TV may
overheat in such conditions which can cause deformation of the
enclosure and/or TV malfunction.
• If the TV is placed in the changing room of
a public bath or hot spring, the TV may be
damaged by airborne sulphur, etc.
• For best picture quality, do not expose the screen to direct
illumination or sunlight.
• Avoid moving the TV from a cold area to a warm area. Sudden
room temperature changes may cause moisture condensation.
This may cause the TV to show poor picture and/or poor colour.
Should this occur, allow moisture to evaporate completely
before powering the TV on.
Broken pieces:
• Do not throw anything at the TV set. The screen glass may break
by the impact and cause serious injury.
• If the surface of the TV set cracks, do not touch it until you have
unplugged the AC power cord (mains lead). Otherwise this may
cause an electric shock.
4GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\020REG.fm
When not in use
• If you will not be using the TV set for several days, the TV set
should be disconnected from the AC power (mains) for
environmental and safety reasons.
• As the TV set is not disconnected from the AC power (mains)
when the TV set is just turned off, pull the plug from the AC
power outlet (mains socket) to disconnect the TV set
completely.
• Some TV sets may have features that require the TV set to be
left in standby to work correctly.
For children
• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that they
are not mistakenly swallowed.
If the following problems occur...
Turn off the TV set and unplug the AC power cord (mains lead)
immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it checked by
qualified service personnel.
When:
 AC power cord (mains lead) is damaged.
 Poor fitting of AC power outlet (mains socket).
 TV set is damaged by being dropped, hit or having something
thrown at it.
 Any liquid or solid object falls through openings in the cabinet.
About LCD TV Temperature
When the LCD TV is used for an extended period, the panel
surrounds become warm. You may feel hot when touching there
by the hand.
Precautions
Viewing the TV
• View the TV in moderate light, as viewing the TV in poor light or
during long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.
masterpage: Right
Handling and cleaning the screen surface/
cabinet of the TV set
Be sure to unplug the AC power cord (mains lead) connected to
the TV set from AC power outlet (mains socket) before cleaning.
To avoid material degradation or screen coating degradation,
observe the following precautions.
• To remove dust from the screen surface/cabinet, wipe gently
with a soft cloth. If dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild detergent solution.
• Never spray water or detergent directly on
the TV set. It may drip to the bottom of the
screen or exterior parts and enter the TV set,
and may cause damage to the TV set.
GB
• Never use any type of abrasive pad, alkaline/acid cleaner,
scouring powder, or volatile solvent, such as alcohol, benzene,
thinner or insecticide. Using such materials or maintaining
prolonged contact with rubber or vinyl materials may result in
damage to the screen surface and cabinet material.
• When adjusting the angle of the TV set, move it slowly so as to
prevent the TV set from moving or slipping off from its table
stand.
Optional Equipment
Keep optional components or any equipment emitting
electromagnetic radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may occur.
Caution about handling the remote control
• Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or mix old and
new batteries.
• Dispose of batteries in an environmentally friendly way. Certain
region may regulate the disposal of batteries. Please consult
your local authority.
• Handle the remote control with care. Do not drop or step on it,
or spill liquid of any kind onto it.
• Do not place the remote control in a location near a heat source,
a place subject to direct sunlight, or a damp room.
LCD Screen
• Although the LCD screen is made with high-precision
technology and 99.99% or more of the pixels are effective, black
dots may appear or bright points of light (red, blue, or green)
may appear constantly on the LCD screen. This is a structural
property of the LCD screen and is not a malfunction.
• Do not push or scratch the front filter, or place objects on top of
this TV set. The image may be uneven or the LCD screen may be
damaged.
• If this TV set is used in a cold place, a smear may occur in the
picture or the picture may become dark. This does not indicate a
failure. These phenomena disappear as the temperature rises.
• Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
• The screen and cabinet get warm when this TV set is in use. This
is not a malfunction.
• The LCD screen contains a small amount of liquid crystal. Follow
your local ordinances and regulations for disposal.
5GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\020REG.fm
masterpage: Left
Disposal of the TV set
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
Disposal of Old Electrical &
Electronic Equipment (Applicable in
Republic of India)
This symbol and its variation indicates that this
product and its components, consumables,
parts or spares thereof shall not be treated as
household waste and may not be dropped in
garbage bins. Product owners are advised to
deposit their product at the nearest collection
point for the recycling of electrical and electronic equipment. Your
co-operation shall facilitate proper disposal & help prevent
potential negative consequences/hazards to the environment
and human health, which could otherwise be caused by
inappropriate waste disposal including improper handling,
accidental breakage, damage and/ or improper recycling of
e-waste. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this
product, please contact your local civic office, your household
waste disposal service provider or the store where you made the
purchase. You may contact our company’s toll free number in
India for assistance.
Toll Free: 1800-103-7799
Visit: www.sony.co.in for product recycling
Reduction in the Use of Hazardous Substances
in Electrical & Electronic Equipment
(Applicable in Republic of India)
This product and its components, consumables, parts or
spares comply with the hazardous substances restriction of
India’s E-Waste (Management) Rules. The maximum allowable
concentrations of the restricted substances are 0.1% by weight
in homogenous materials for Lead, Mercury, Hexavalent
Chromium, Polybrominated Biphenyls (PBB) and
Polybrominated Diphenyl Ethers (PBDE), and 0.01% by weight
in homogenous materials for Cadmium, except for the
exemptions specified in Schedule II of the aforesaid Rules.
6GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\030PAR.fm
 +/–/
masterpage: Right
/
(Volume / Item select)
• Increases/decreases the volume, or
selects the next (+) or previous (–) channel
when the CH Up/Down notification is
displayed by pressing the CH/INPUT
button.
• Moves the selected input source up/down
when the input select menu is displayed
by pressing the CH/INPUT button.
Parts and Controls
TV
 (Sensors/LED indicator)
3
2
Note
• Make sure that the TV is completely turned off before
unplugging the AC power cord (mains lead).
Hint
• The  + button has a tactile dot. Use it as a reference
when operating the TV.
4
 / (Power)
Turns the TV on or switches to standby
mode.
Note
• To disconnect the TV from the AC power
completely, pull the plug from the mains socket.
 CH/INPUT
Switches between the CH Up/Down screen
and the input select screen.
7GB
KLV-40R352D / 32R302D
4-591-567-12(1)
GB
Parts and Controls
1
• Receives signals from the remote control.
Do not put anything over the sensor.
Doing so may affect its function.
• Lights up in amber when the [Sleep Timer]
or [On Timer] is set (page 17), or the TV is
in Photo Frame Mode (page 11).
• Lights up in green when [Power Saving] is
set to [Picture Off] (page 19).
• Lights up in green when the TV is turned
on.
• Does not light up when the TV is in
standby mode.
• Flashes while the remote control is being
operated.
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\030PAR.fm
masterpage: Left
Speakers:
Select [TV Speakers] or [Audio System] to
output the TV’s sound from the TV speakers
or connected audio equipment.
Remote Control
TV Control:
Use the [TV Control] menu to operate the TV
from the [Home (Menu)] or [Options] menu.
Return to TV:
Select this option to return to TV
programme.

Exit Text mode, or switches to a TV display
when displaying external input.
 Number buttons
• Select channels. For channel numbers 10
and above, enter the next digit quickly.
• In text mode, enter the three digit page
number to select the page.
  (Text)
In text mode, displays Text broadcast.
Each time you press , the display changes
cyclically as follows:
Text  Text over the TV picture (mix mode) 
No Text (exit the Text service)
 Colour buttons
Displays operation guide (when colour
buttons are available).
 SLEEP

/
Press repeatedly until the TV displays the
time in minutes ([Off]/[15 min]/[30 min]/
[45 min]/[60 min]/[90 min]/[120 min]) that
you want the TV to remain on before
shutting off. To cancel the sleep timer, press
SLEEP repeatedly until [Off] appears.
(Input select / Text hold)
• Displays and selects the input source.
• In text mode, holds the current page.
 SYNC MENU
Press to display the BRAVIA Sync Menu and
then select connected HDMI equipment
from [Device Selection].
The following options can be selected from
BRAVIA Sync Menu.
Device Control:
Use the [Device Control] to operate
equipment that is compatible with BRAVIA
Sync Control. Select options from [Home
(Menu)], [Options], [Content List] and [Power
Off] to operate the equipment.

////
(Item select / Enter)
• Select or adjust items.
• Confirm selected items.
 RETURN
• Returns to the previous screen of any
displayed menu.
• Stops playback when playing photo/
music/video file.
 HOME
Displays or cancels the menu.
  +/– (Volume)
Adjust the volume.
8GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\030PAR.fm
masterpage: Right
  (Mute)
Mutes the sound. Press again to restore the
sound.
 //////
• Operate the connected BRAVIA Synccompatible equipment.
• These keys also can be used to operate
USB media playback.
 / (TV standby)
GB
Parts and Controls
Turns the TV on or switches to standby
mode.
 AUDIO
Select the sound of multilingual source or
dual sound for the programme current
being viewed (Depend on programme
source).

(Wide Mode)
Adjusts the screen display. Press repeatedly
to select the desired wide mode (page 10).

/
(Info / Text reveal)
• Displays information. Press once to
display information about the
programme/input you are viewing. Press
again to remove the display from the
screen.
• In text mode, reveals hidden information
(e.g. answers to a quiz).
 OPTIONS
Displays a list that contains shortcuts to
some setting menus.
The listed options vary depending on the
current input and content.

(Jump)
Returns to the previous channel or input
viewed more than 15 seconds.
 PROG +/–/
/
• Selects the next (+) or previous (–)
channel.
• In text mode, selects the next ( ) or
previous ( ) page.
Hint
• The number 5, , PROG + and AUDIO buttons have
tactile dots. Use the tactile dots as references when
operating the TV.
9GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\050WAT.fm
Watching TV
1
Press / on the TV or remote control to
turn on the TV.
2
Press the number buttons or PROG +/–
to select a TV channel.
3
Press  +/– to adjust the volume.
masterpage: Left
Changing the Viewing Style
Changing the Wide Mode
1
Press
mode.
repeatedly to select the wide
[Wide Zoom]*
[Normal]
[Full]
[Zoom]*
* Parts of the top and bottom of the picture may
be cut off.
For HDMI PC Input (PC timing)
[Normal]
[Full 1]
[Full 2]
Setting Scene Select
1
2
Press OPTIONS.
Press / then
to select [Scene
Select].
When you select the desired scene
option, the optimum picture and sound
quality for selected scene are
automatically set. The options you can
select may vary. Unavailable options are
greyed out.
10GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
Navigating through Home Menu
The HOME button allows you to access a variety
of TV settings and features.
1
masterpage: Right
Applications
Using the TV as a Photo Frame Mode
Photo Frame Mode displays the clock and
calendar at the same time as displaying a
photo, and listening to music or FM radio.
Press HOME.
HOME  [Applications]  [Photo Frame
Mode]
GB
Press / to select an option, then
press .
Favourites
The Favourite feature allows you to specify up 18
channels of your favourite programmes.
1
2
1
Press OPTIONS while playback a photo
or music file.
2
Press / then
to select [Photo
Frame Mode] to launch Photo Frame.
To select Display mode
Press HOME.
Press / then
To launch Photo Frame Mode while
playback USB media
to select [Favourites].
You can change the Photo Frame Mode display
by selecting [Display Mode] in the [Photo Frame
Settings] (page 17).
To select Clock Display mode
You can select among three clock display
modes by selecting [Clock Display] in the [Photo
Frame Settings] (page 17).
Note
3
Press / then
programme.
• This TV does not have a battery powered backup for
the clock. If there is a power failure or if you
disconnect the power cord, the current date and time
will reset automatically.
to select a
11GB
KLV-40R352D / 32R302D
4-591-567-12(1)
Navigating through Home Menu
2
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
masterpage: Left
Duration
To save power, the TV continually plays back in
Photo Frame Mode for up to 24 hours before
powering off automatically. After automatic
power off, do not use Photo Frame Mode for at
least one hour to avoid panel burn-in.
You can change the setting of the [Duration] in
the [Photo Frame Settings] (page 17).
Media
To avoid panel burn-in, the position of the
photo, clock and calendar are switched
automatically every hour.
1
Connect a supported USB device to the
TV.
2
3
4
Press HOME.
Listening to FM Radio
HOME  [Applications]  [FM Radio]
Note
• Press PROG +/– to select an FM radio station. Press
RETURN to exit FM Radio mode.
Playback Photo/Music/Video via USB
You can enjoy photo/music/video files stored in
a Sony digital still camera or camcorder through
a USB cable or USB storage device on your TV.
5
Press / then
to select [Media].
Press / then
to select [Photo],
[Music] or [Video].
Press /// then
or folder.
to select a file
Presetting Radio Stations
Playback Options
When you use FM Radio function for the first
time, press HOME and select [Settings] 
[System Settings]  [Channel Set-Up]  [FM
Radio Set-up]  [Auto Tuning].
Press the red button in thumbnail view to
display the list of USB playback settings.
To change preset radio stations
1
2
Press OPTIONS in FM Radio mode.
Press / then
Presets].
to select [FM Radio
3
Press / then
to select the radio
station you want to change.
4
Press / then
to change the FM
frequency then to edit FM Radio station
name.
To adjust the picture and sound quality of
USB media
Press OPTIONS during media playback then
select [Picture] or [Sound].
Note
• Press /// then
to select and adjust an item.
Note
• If the station has a noisy sound, you may be able to
improve the sound quality by pressing /.
• When an FM stereo programme has static noise, press
AUDIO until [Mono] appears. There will be no stereo
effect, but the noise will be reduced.
12GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
To play a photo as a slideshow (Photo)
1
Press the green button in thumbnail
view to start slideshow.
To set [Slideshow Effect] and [Slideshow
Speed], press OPTIONS  [Playback
Options].
To stop a slideshow, press RETURN.
Note
• WebM (.webm)
Video Codec: VP8
Audio Codec: VORBIS
• PS (.mpg, .mpeg, .vro, .vob)
Video Codec: MPEG1, MPEG2
Audio Codec: MPEG1 Layer1/2, MP3, Dolby
Digital (2ch), DTS, DTS 2.0
• TS (.ts, .m2ts)
Video Codec: MPEG2, H.264, VC-1
Audio Codec: MPEG1 Layer1/2, MP3, MPEG2
AAC, MPEG4 AAC, MPEG4 HEAAC, Dolby Digital, DTS, DTS 2.0
USB Music format
• LPCM (.wav)
• MPEG1 audio layer3 (.mp3)
• WMA V8 (.wma)
GB
USB Photo format
• JPEG (.jpg, .jpeg)
Note
• Playback of the above file formats is not guaranteed.
USB Video format
• AVI (.avi)
Video Codec: MPEG1, MPEG2, Xvid, MPEG4,
H.264, Motion JPEG
Audio Codec: PCM, MPEG1 Layer1/2, MPEG2
AAC (2ch), MPEG4 AAC (2ch),
MPEG4 HE-AAC (2ch), Dolby
Digital (2ch), WMA v8, MP3
• ASF (.wmv, .asf)
Video Codec: WMV v9, Xvid, VC-1
Audio Codec: MP3, WMA v8
• MP4 (.mp4, .mov, .3gp)
Video Codec: MPEG4, H.264, H.263, Motion
JPEG
Audio Codec: MPEG1 Layer1/2, MP3, MPEG2
AAC, MPEG4 AAC, MPEG4 HEAAC
• MKV (.mkv)
Video Codec: WMV v9, MPEG4, H.264, VC-1,
VP8
Audio Codec: PCM, MPEG1 Layer1/2, MP3,
MPEG2 AAC (2ch), MPEG4 AAC
(2ch), MPEG4 HE-AAC (2ch),
Dolby Digital (2ch), WMA v8,
DTS, DTS 2.0, VORBIS
13GB
KLV-40R352D / 32R302D
4-591-567-12(1)
Navigating through Home Menu
• While the TV is accessing the data on a USB device,
observe the following:
 Do not turn off the TV.
 Do not disconnect the USB cable.
 Do not remove the USB device.
The data on the USB device may be damaged.
• Sony will not be held liable for any damage to, or loss
of, data on the recording media due to a malfunction
of any connected devices or the TV.
• The file system on the USB device supports FAT16,
FAT32 and NTFS.
• The file name and folder name may not display
correctly in some cases.
• When you connect a Sony digital still camera, set the
camera’s USB connection mode to Auto or Mass
Storage. For more information about USB connection
mode, refer to the instructions supplied with your
digital camera.
• Use a USB storage device that is compliant with USB
mass storage device class standards.
• If a selected file has incorrect container information,
or is incomplete, it cannot be played back.
masterpage: Right
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
Settings
System Settings
Note
• The options you can adjust vary depending on the
situation. Unavailable options are greyed out or not
displayed.
Picture
masterpage: Left
Cinema Drive
Provides improved picture movement
when playing BD (Blu-ray Disc), DVD or
VCR images taken on film. Select [Auto] to
represent original film-based content as it
is.
Note
• If the image contains irregular signals or too
much noise, [Cinema Drive] is automatically
turned off even if [Auto] is selected.
Advanced Settings
Picture Mode
Sets [Picture] settings in more detail.
Sets a picture mode.
Reset: Resets all the advanced settings
to the default settings.
Reset
Resets all the [Picture] settings except
[Picture Mode] and [Intelligent Picture
Plus] to the default settings.
Adv. Contrast Enhancer: Automatically
adjusts [Backlight] and [Picture] to
the most suitable settings for dark
images scenes.
Backlight
Black Corrector: Enhances black areas
of the picture for stronger contrast.
Adjusts the brightness of the backlight.
Picture
Gamma: Adjusts the balance between
bright and dark areas of the picture.
Increases or decreases picture contrast.
Clear White: Emphasises white colours.
Live Colour: Makes colours more vivid.
Brightness
Brightens or darkens the picture.
Colour
Increases or decreases colour intensity.
Hue
Increases or decreases the green tones
and red tones.
Sharpness
Sharpens or softens the picture.
Colour Temperature
Adjusts the whiteness of the picture.
Noise Reduction
LED Motion Mode: Reduces blur in
movies by controlling the LED
backlight source, but the brightness
decreases.
Intelligent Picture Plus Set-up
Intelligent Picture Plus: Enhances
picture quality according to preferred
settings, channel or video input.
Signal Level Indicator: When [On] is
selected, the signal level bar will be
displayed when you select analogue
channel or video input.
Picture Optimisation: Allows you to
enhance the picture to your preferred
settings.
Reduces the picture noise (snowy picture)
in a weak broadcast signal.
MPEG Noise Reduction
Reduces the picture noise in MPEGcompressed video.
14GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
Sound
Sound Mode
Select according to content you want to
enjoy.
masterpage: Right
Advanced Settings
Dynamic Range: Compensates for
differences in the audio level
between different channels.
Note
Reset
Reset [Equaliser], [Clear Voice], [Intelligent
Volume], [Balance] and [Volume Offset]
settings.
Equaliser
Adjusts sound frequency settings.
Clear Voice
Makes voices sound clearer.
Minimizes the difference in volume level
between all programmes and adverts.
HE-AAC Audio Level: Adjust the HEAAC audio sound level.
MPEG Audio Level: Adjusts the MPEG
audio sound level.
Screen
GB
Wide Mode
For details about wide mode, see page 10.
Auto Wide
Emphasises left or right speaker balance.
Automatically changes the wide mode
according to the input signal from an
external equipment.
Volume Offset
4:3 Default
Balance
Adjusts the volume level of the current
input relative to other inputs.
Dual Sound
Sets the sound from the speaker to
[Mono], [Stereo], [Main] or [Sub].
Note
• If the signal is very weak, the sound becomes
monaural automatically.
• If the stereo sound is noisy when receiving a
NICAM programme, select [Mono]. The sound
becomes monaural, but the noise is reduced.
• The [Dual Sound] setting is memorized for
each programme position.
• You cannot listen to stereo broadcast sound
when [Mono] is selected.
Hint
• If you select other equipment connected to the
TV, set [Dual Sound] to [Stereo], [Main] or [Sub].
Sets the default [Wide Mode] for a 4:3
input signal.
Auto Display Area
Select [On] to automatically adjusts the
display area based upon the content or
[Off] to choose from the [Display Area]
options.
Display Area
Adjusts the picture display area.
Horizontal Shift
Adjusts the horizontal position of the
picture.
Vertical Shift
Adjusts the vertical position of the picture.
PC Settings
Adjusts the picture size, see page 10.
15GB
KLV-40R352D / 32R302D
4-591-567-12(1)
Navigating through Home Menu
Intelligent Volume
• The effect may not function or may vary
depending on the programme regardless of
the [Dynamic Range] setting.
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
Channel Set-up
masterpage: Left
FM Radio Set-up
1 Digit Direct
Presets up to 30 FM radio stations that can
be received in your area.
When [1 Digit Direct] is set to [On], you can
select a channel using one preset number
button (0 - 9) on the remote control.
Auto Tuning: Allows you to
automatically tune and store all the
available channels.
Auto Tuning
Tunes in all the available channels
Programme Sorting
Changes the order in which the channels
are stored on the TV.
FM Radio Presets: Allows you to
manually tune and store each
available channel one at a time.
Note
• To enable this feature, access to FM Radio
mode by using Home (Menu) (page 12), then
preset your desired FM radio stations
according to the steps mentioned above.
Programme Labels
Assign a channel name of your choice up
to seven letters or numbers.
Manual Programme Preset
Before selecting [Channel]/[AFT]/[Audio
Filter]/[Skip]/[Colour System], press
PROG +/– to select the programme
number with the channel. You cannot
select a programme number that is set to
[Skip:] (page 16).
Programme/TV System: Presets
programme channels manually.
Channel: Selects a channel number.
AFT: Allows you to fine-tune the
selected channel manually. When
[On] is selected, the fine tuning is
performed automatically.
Audio Filter: Improves the sound of
individual channels when distortion
occurs in mono broadcasts in TV
system [B/G], [I], [D/K] and [M].
Note
• You cannot receive stereo or dual sound
when [Low]/[High] is selected.
Skip: Skips unused channels.
Parental Lock
PIN Code
Sets a PIN code. Use 0-9 on the remote
control to enter a four-digit PIN code.
Change PIN Code
Select to change your PIN code.
Programme Block
Locks a channel from being watched. To
view a blocked channel, select
[Unblocked].
External Input Lock
Locks an external input from being
watched. To view a blocked external input,
select [Unblocked].
Note
• Entering the correct PIN code for blocked
channel or external input will temporarily
deactivates the [Parental Lock] feature. To
reactivate the [Parental Lock] settings, turn off
and on the TV.
Hint
• If you lost your PIN code, see page 26.
Colour System: Select the colour
system according to the channel.
Signal Level: Displays the signal level
for programme currently being
watched.
16GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
Set-up
Photo Frame Settings
Display Mode: Allows you to select the
display mode. See page 11.
Clock Display: Allows you to select the
clock display.
Note
• This option is available when [Display
Mode] is set to [Image and Clock] or [Full
Screen Clock].
Audio Application: Sets [FM Radio],
[Music] or [Off] as audio application.
Image Selection: Select image.
Music Selection: Select music.
Music Playback Setting: Select from
listening to all tracks or a single
music track.
Duration: Select the time period after
which the TV automatically switches
to standby mode.
First day of the week: Sets [Sunday] or
[Monday] as the first day of the week
on the calendar.
USB Auto Start
When USB device is connected to the USB
port, select [On] to automatically view the
thumbnail of the last played Photo/
Music/Video.
Clock/Timers
Sets the timer and clock.
Sleep Timer: Sets the time in minutes
that you would like the TV to remain
on before shutting off automatically.
Clock Set: Sets the current time and
date.
Date
Set current date.
Time
Set Current Time.
Auto Start-up
Starts the initial set-up procedure. This
option allows you to retune the TV after
moving houses, or to search for new
channels that have been launched by
broadcasters.
Language
Select the language in which the menus
are displayed.
Start-up Logo
Select [On] to display the logo when the
TV is turned on. Select [Off] to disable it.
LED Indicator
Select [On] to light up the LED indicator.
Select [Off] to disable it.
AV Set-up
Video Labels: Assigns name to external
equipment input.
Enable: Select [Auto] to display names
only when the equipment is connected,
or [Always] to display regardless of
connection status.
Label Inputs: Uses one of the preset
labels to assign a name to connected
equipment. Select [Edit] to creates your
own label.
Colour System: Selects the colour
system according to the composite
video signal from the input source.
On Timer: Turns on the TV from
standby mode at a time you set, and
tuned to a channel or input of your
preference. Before setting this
function, make sure you set the
correct current time.
17GB
KLV-40R352D / 32R302D
4-591-567-12(1)
GB
Navigating through Home Menu
Slideshow Setting: Select from
showing slideshow mode or single
view photo.
masterpage: Right
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
Video/Component Input: Select [Auto]
to have the TV detect and switch
between the component video jack
or the video jack
when
component video jack
or video
jack
is connected.
Note
• You cannot use the component video jack
and the video jack at the same time.
Speakers: Select sound output from
the TV speakers or external audio
equipment.
Headphone/Audio Out: Sets the sound
output to headphone, external audio
systems or Active Subwoofer
connected to the TV. Disconnect
headphone from the TV when you
select [Audio Out] or [Subwoofer].
Headphone Speaker Link: Switches the
TV’s internal speakers on/off when
you connect headphone to the TV.
Headphone Volume: Adjusts the
volume of the headphone.
Note
• This option is not available, when
[Headphone/Audio Out] is set to [Audio
Out] or [Subwoofer].
Audio Out:
Variable: When using an external
audio system, volume output from
audio out can be controlled using the
TV’s remote control.
Fixed: The audio output of the TV is
fixed. Use your audio receiver’s
volume control to adjust the volume
(and other audio settings) through
your audio system.
Hint
• This option is only available when
[Headphone/Audio Out] is set to [Audio
Out].
masterpage: Left
TV Position: Improves the speaker
settings when set as [Table-Top
Stand] or [Wall Mount] according to
your TV’s position.
BRAVIA Sync Settings
Allows the TV to communicate with
equipment that is compatible with the
BRAVIA Sync Control function, and
connected to the HDMI ports of the TV.
Note that communication settings must
also be made on the connected
equipment.
BRAVIA Sync Control: Sets whether or
not to link the operations of the TV
and the connected equipment that is
compatible with BRAVIA Sync
Control. When set to [On], the
following functions are available. If
the specific Sony equipment that is
compatible with BRAVIA Sync Control
is connected, this setting is applied
to the connected equipment
automatically.
Auto Devices Off: When set to [On], the
connected equipment that is
compatible with BRAVIA Sync Control
turns off when your TV goes to
standby mode.
Auto TV On: When set to [On], the TV
turns on when you turn on the
connected equipment that is
compatible with BRAVIA Sync
Control.
BRAVIA Sync Device List: Displays a list
of connected equipment that is
compatible with BRAVIA Sync
Control. Select [Enable] to update the
[BRAVIA Sync Device List].
Digital Audio Out: Sets the audio signal
that is output by connecting using
HDMI cable. Set to [Auto], when
connecting equipment compatible
with Dolby Digital or DTS. Set to
[PCM], when connecting equipment
not compatible with Dolby Digital or
DTS.
18GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\060NHM.fm
Device Control Keys: Select button
functions of the TV’s remote control
to operate the connected
equipment.
None
Deactivates the control by the TV’s
remote control.
Normal
For basic operations, such as navigation
buttons (up, down, left or right, etc).
Tuning Keys
For basic operations and operation of
channel-related buttons, such as
PROG +/– or (0-9), etc. Useful when
you control a tuner or set-top box,
etc; via the remote control.
Note
• Some equipment with [BRAVIA Sync
Control] does not support the [Device
Control Keys] feature.
Customer Support
Customer Support
Model Name
Displays model name of your TV.
Software Version
Displays current software version of your TV.
External Inputs
View Video Labels: Allows you to view or
manage the TV and external inputs.
Picture Check
View Test Picture: Allows you to check the
picture condition on the display.
Software Update
Select to perform system update.
Factory Settings
Resets all settings to factory settings. After
completing this process, the initial set-up
screen is displayed.
Note
• Be sure not to turn the TV off during this period (it
takes about 30 seconds) or press any buttons.
Product Information
Displays your TV’s product information.
Provides information of your TV’s model,
software, and others. For details, see
page 19.
Eco
Reset
Resets the current Eco settings to the
default values.
Power Saving
Reduces power consumption of the TV by
adjusting the backlight.
When you select [Picture Off], the picture
is switched off. The sound remains
unchanged.
Idle TV Standby
Turns the TV off after it has been kept idle
for the preset length of time.
19GB
KLV-40R352D / 32R302D
4-591-567-12(1)
GB
Navigating through Home Menu
Menu Keys
For basic operations and operation of
the HOME/OPTIONS buttons.
Useful when you select menus of a BD
player, etc; via the remote control.
Tuning and Menu Keys
For basic operations and operation of
channel-related buttons and HOME/
OPTIONS button.
masterpage: Right
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\070OPT.fm
masterpage: Left
Viewing Pictures from Connected Equipment
Connection Diagram
You can connect a wide range of optional equipment to your TV.
Note
• Depending on TV model, connecting a large USB device may interfere with other connected devices beside it.
• When connecting a large USB device, connect only 1 USB jack.
Home Audio System
with ARC/HDMI Device
HDMI
Device
*
*
Digital still
camera/
Camcorder/
USB storage
media
*
VCR/Video game equipment/DVD player/
Camcorder
< 12 mm
< 21 mm
Headphone/Home
Audio System/Subwoofer
DVD player with component output
Picture Quality
• AV composite cable
• Antenna (aerial) cable
• Component cable
SD
Standard definition (SD) videos have picture signals with a
vertical resolution of 480 (NTSC) or 576 (PAL/SECAM) lines.
• HDMI cable
HD
High definition (HD) videos have picture signals
with a vertical resolution of 720 or 1,080 lines.
20GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\070OPT.fm
masterpage: Right
Using Audio and Video
Equipment
1 Turn on the connected equipment.
2 Press to display the input source.
3 Press / then to select the desired
input source.
The highlighted item is selected if 5 seconds
pass without any operation.
Note
• When connecting with an HDMI cable, be sure to use
HighSpeed HDMI Cable with Cable Type Logo
(Recommended SONY Cable).
• When connecting mono equipment, connect the
audio cable to the L (mono) jack.
GB
To use BRAVIA Sync devices
Viewing Pictures from Connected Equipment
When connecting the TV to BRAVIA Sync
compatible equipment, you can control them
together.
Be sure to perform the necessary settings in
advance. The BRAVIA Sync Control settings must
be set on both the TV and the connected
equipment. See [BRAVIA Sync Settings]
(page 18) for the settings on the TV side. Refer
to the connected equipment operating
instructions for the settings on the connected
equipment side.
21GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\080ADD.fm
masterpage: Left
Additional Information
Installing the TV to the Wall
This TV’s instruction manual only shows the steps on preparing the installation of the TV before
installing to the wall.
To Customers:
For product protection and safety reasons, Sony strongly recommends that installation of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Sufficient expertise is required for installing this product, especially to determine the strength of the
wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall
to Sony dealers or licensed contractors and pay adequate attention to safety during the installation.
Sony is not liable for any damage or injury caused by mishandling or improper installation.
Use the Wall-Mount Bracket SU-WL450 (not supplied) to install the TV to the wall.
When installing the Wall-Mount Bracket, also refer to the Operating Instructions and Installation Guide
supplied with the Wall-Mount Bracket.
Note
• If the Table-Top Stand is attached to the TV, detach the Table-Top Stand beforehand. See the Startup Guide and
follow in reverse order the steps to detach the Table-Top Stand.
• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft cloth, when
securing the Mounting Hook or when removing the Table-Top Stand from the TV to prevent damaging the surface of
the LCD display.
To detach the Table-Top Stand from the TV
22GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\080ADD.fm
1
masterpage: Right
Make sure that the wall has enough space for the TV and is capable of supporting a
weight of at least four times that of the TV. Refer to the following table on installing the TV
to the wall. See page 26-27 (Specifications) for the TV’s weight.
Standard mounting
80
Screen centre point
Unit: mm
Display dimensions
Screen centre dimension
Length for mounting
Model Name
KLV-
40R352D
924
550
84
201
127
32R302D
735
443
30
201
125
Note
• Figures in the table may differ slightly depending on the installation.
• When your TV is installed on the wall, the upper side of the TV slightly leans forward.
2
Remove screws from the rear of the TV. Be sure to store the removed screws in a safe
place, keeping them away from children.
Soft cloth
23GB
KLV-40R352D / 32R302D
4-591-567-12(1)
GB
Additional Information
Standard
mounting
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\080ADD.fm
3
masterpage: Left
Attach the Attachment parts for Wall-Mount Bracket. Check the Attachment parts by
referring to “1” of the Wall-Mount Bracket Installation Guide.
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
Standard mounting
Screw (+PSW 4 x 20) with Bush 
Pulley 
Screw (+PSW 4 x 50) 
Bush (M4) 
Spacer (60 mm) 
Belt 
4
Connect necessary cables to the TV.
Note
• You cannot access to any terminal after installing the TV to the wall.
5
Install the TV to the Base. Refer to “5” of Installation Guide and “Installing the TV to the
Wall” of Operating Instructions supplied with the Wall-Mount Bracket.
Model Name KLV-
Hook location
40R352D
32R302D
a
b
c
d
d
Refer to the instructions supplied with the Wall-Mount Bracket for your model to install the TV on the wall.
24GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\080ADD.fm
masterpage: Right
 Keep the antenna cable away from other
Troubleshooting
When the LED indicator is flashing red, count
how many times it flashes (interval time is
three seconds).
If the LED indicator flashes red, reset the TV by
disconnecting the AC power cord (mains lead)
from the TV for two minutes, then turn on the
TV.
If the problem persists, contact your dealer or
Sony service centre with the number of times
the LED indicator flashes red (interval time is
three seconds). Press / on the TV to turn it off,
disconnect the AC power cord (mains lead), and
inform your dealer or Sony service centre.
When the LED indicator is not flashing, check
the items as follows.
If the problem persists, have your TV serviced by
qualified service personnel.
No picture (screen is dark) and no sound
 Check the antenna (aerial)/cable connection.
 Connect the TV to the AC power outlet (mains
socket), and press / on the TV or the remote
control.
No picture or no menu information from
equipment connected to the video input jack
appears on the screen
 Press
to display the connected equipment
list, then select the desired input.
 Check the connection between the optional
equipment and the TV.
Double images or ghosting
 Check the antenna (aerial)/cable connection,
location or direction.
Only snow and noise appear on the screen
 Check if the antenna is broken or bent.
 Check if the antenna has reached the end of its
serviceable life (three to five years in normal use,
one to two years at the seaside).
Distorted picture (dotted lines or stripes)
 Keep the TV away from electrical noise sources
such as cars, motorcycles, hair-dryers or optional
equipment.
 When installing optional equipment, leave some
space between the optional equipment and the
TV.
 Check the antenna (aerial)/cable connection.
 Adjust [AFT] (Automatic Fine Tuning) to obtain
better picture reception. This function is for
analogue TV channels only.
Tiny black points and/or bright points appear
on the screen
 The picture of a display unit is composed of
pixels. Tiny black points and/or bright points
(pixels) on the screen do not indicate a
malfunction.
Picture contours are distorted
 Change the current setting of [Cinema Drive] to
other settings (page 14).
No colour on programmes
 Select [Reset] (page 14).
No colour or irregular colour when viewing a
signal from the Y, PB, PR jacks of
/
GB
 Check the connection of the Y, PB, PR jacks of
Additional Information
Picture
connecting cables.
Picture or sound noise when viewing a TV
channel
/
and check if each jacks are firmly seated
in their respective jacks.
No picture from the connected equipment
appears on the screen
 Turn the connected equipment on.
 Check the cable connection.
 Press
to display the connected equipment
list, then select the desired input.
 Correctly insert the memory card or other storage
device in the digital still camera.
 Use a digital still camera memory card or other
storage device that has been formatted according
to the instruction manual supplied with the digital
still camera.
 Operations are not guaranteed for all USB
devices. Also, operations differ depending on the
features of the USB device and the video being
played.
Cannot select the connected equipment on
the menu or cannot switch the input
 Check the cable connection.
Sound
No sound, but good picture
 Press  +/– or  (Mute).
 Check if [Speakers] in [AV Set-up] is set to [TV
Speakers] (page 18).
 Check if the headphone plug is connected to the
TV.
25GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\080ADD.fm
masterpage: Left
No sound or noisy sound
 Check if the TV system setting is appropriate
(page 15).
Specifications
System
Channels
Some channels are blank
 Contact the broadcaster for transmission details.
General
The TV turns off automatically (the TV enters
standby mode)
 Check if the [Sleep Timer] is activated (page 17).
 Check if the [Duration] is activated by [On Timer]
Panel system
LCD (Liquid Crystal Display) Panel, LED backlight
TV system
Analogue: B/G, I, D/K, M or M/N
Depend on your country/area selection
Colour/video system
Analogue: PAL, SECAM, NTSC3.58, NTSC4.43
Channel coverage
Analogue: VHF/UHF/Cable, Depend on your
country/area selection
Sound output (Only for 19.5 V supply)
(page 17) or [Photo Frame Settings] (page 17).
 Check if the [Idle TV Standby] is activated
(page 19).
Input/Output jacks
Some input sources cannot be selected
Antenna (aerial)/cable
 Select [Video Labels] and select [Always] of the
input source (page 17).
The remote control does not function
 Replace the batteries.
HDMI equipment does not appear on [BRAVIA
Sync Device List]
 Check that your equipment is compatible with
BRAVIA Sync Control.
5W+5W
75 ohm external terminal for VHF/UHF
COMPONENT IN/
VIDEO IN
COMPONENT IN
Supported formats: 1080p(50, 60 Hz), 1080i(50,
60 Hz), 720p(50, 60 Hz), 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3 V negative sync
PB: 0.7 Vp-p, 75 ohms
PR: 0.7 Vp-p, 75 ohms
Video input (phono jack)
COMPONENT IN/
AUDIO IN
Cannot select [Off] in [BRAVIA Sync Control]
Audio input (phono jacks)
 If you have connected any audio system that is
HDMI IN 1 (ARC), HDMI IN 2
compatible with BRAVIA Sync Control, you cannot
select [Off] in this menu. To change the audio
output to the TV speaker, select [TV Speakers] in
the [Speakers] menu (page 18).
The [Parental Lock] password has been
forgotten
 Enter 9999 for the PIN code.
 Update PIN code by pressing HOME and select
[Settings] t [System Settings] t [Parental Lock]
t [Change PIN Code].
Store Display Mode or Promoting Feature
Logo appears on the screen
 On the remote control, press RETURN then press
HOME and select [Settings] t [System Settings]
t [Set-up] t [Auto Start-up]. Be sure to select
[Home] in [Location].
HDMI Video: 1080p(30, 50, 60 Hz), 1080/24p,
1080i(50, 60 Hz), 720p(30, 50, 60 Hz), 720/24p,
576p, 576i, 480p, 480i
PC input: (Horizontal × Vertical, Horizontal
frequency, Vertical frequency)
For KLV-40R352D
640 × 480, 31.5 kHz, 60 Hz
800 × 600, 37.9 kHz, 60 Hz
1,024 × 768, 48.4 kHz, 60 Hz
1,280 × 768, 47.4 kHz, 60 Hz
1,280 × 768, 47.8 kHz, 60 Hz
1,360 × 768, 47.7 kHz, 60 Hz
1,280 × 1,024, 64 kHz, 60 Hz
*1,920 × 1,080, 67.5 kHz, 60 Hz
* The 1080p timing when applied to the HDMI input
will be treated as a video timing and not PC
timing.
26GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\080ADD.fm
For KLV-32R302D
640 × 480, 31.5 kHz, 60 Hz
800 × 600, 37.9 kHz, 60 Hz
1,024 × 768, 48.4 kHz, 60 Hz
1,280 × 768, 47.4 kHz, 60 Hz
1,280 × 768, 47.8 kHz, 60 Hz
1,360 × 768, 47.7 kHz, 60 Hz
Audio: Two channel linear PCM: 32, 44.1 and
48 kHz, 16, 20 and 24 bits, Dolby Digital
ARC (Audio Return Channel) (HDMI IN 1 only)
PCM, Dolby Digital, DTS
AUDIO OUT/ (Stereo mini jack)
Headphone, Audio output, Subwoofer
USB port
DC IN 19.5 V
AC adapter input
Others
Optional accessories
Wall-Mount Bracket: SU-WL450
Operating temperature
Power and others
Power requirements
19.5 V DC with AC adapter
Rating: Input 100 V - 240 V AC, 50/60 Hz
Screen size (measured diagonally) (approx.)
KLV-40R352D: 40 inches / 101.6 cm
KLV-32R302D: 31.5 inches / 80.0 cm
Display resolution
KLV-40R352D: 1,920 dots (horizontal) × 1,080 lines
(vertical)
KLV-32R302D: 1,366 dots (horizontal) × 768 lines
(vertical)
Power consumption
KLV-40R352D: 51 W
KLV-32R302D: 37 W
Dimensions (Approx.) (w × h × d)
with Table-Top Stand
KLV-40R352D: 924 × 568 × 183 mm
KLV-32R302D: 735 × 461 × 168 mm
without Table-Top Stand
without Table-Top Stand
KLV-40R352D: 6.5 kg
KLV-32R302D: 4.5 kg
Note
• Optional accessories availability depends on
countries/region/TV model/stock.
• Design and specifications are subject to change
without notice.
Trademark information
• The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.
• Manufactured under license from Dolby
Laboratories.
Dolby, Dolby Audio, and the double-D
symbol are trademarks of Dolby
Laboratories.
• “BRAVIA” and
are trademarks of
Sony Corporation.
• “Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc”
logo are trademarks of Blu-ray Disc
Association.
• For DTS patents, see
http://patents.dts.com. Manufactured
under license from DTS, Inc.
DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and
DTS 2.0+ Digital Out is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
• TUXERA is a registered trademark of Tuxera
Inc. in the US and other countries.
• Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or
other countries.
• This product contains technology subject
to certain intellectual property rights of
Microsoft. Use or distribution of this
technology outside of this product is
prohibited without the appropriate
license(s) from Microsoft.
KLV-40R352D: 924 × 550 × 65 mm
KLV-32R302D: 735 × 443 × 63 mm
Mass (Approx.)
with Table-Top Stand
KLV-40R352D: 6.9 kg
KLV-32R302D: 4.8 kg
27GB
KLV-40R352D / 32R302D
4-591-567-12(1)
GB
Additional Information
0 ºC – 40 ºC
masterpage: Right
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\080ADD.fm
masterpage: Left
28GB
KLV-40R352D / 32R302D
4-591-567-12(1)
D:\SONY TV\SY160125_SE1L MK2 PAA IM (REV 1)\4591567121_GB\090BCO.fm
masterpage: BCO
Customer Support and Contact:
© 2016 Sony Corporation
Printed in Malaysia
4-591-567-12(1)
KLV-40R352D / 32R302D
4-591-567-12(1)