Nikon COOLPIX B700 Quick Start Guide

DIGITAL CAMERA
Quick Start Guide
Introduction
Parts of the Camera
Getting Started
Basic Shooting and Playback Operations
Connecting to a Smart Device (SnapBridge)
Other Functions
Technical Notes
ii
1
2
8
14
20
24
• Read this manual thoroughly before using the camera.
• To ensure proper use of the camera, be sure to read “For
Your Safety” (page vi).
• After reading this manual, keep it in a readily accessible
place for future reference.
Introduction
Read This First
Thank you for purchasing the Nikon COOLPIX B700 digital camera.
Downloading the “Reference Manual”
The Reference Manual (PDF format) provides details in various languages on how to use
this product. Download the Reference Manual from our Download Center at the URL
below and save it on your smart device or computer for reference.
• The Reference Manual can be viewed using Adobe Acrobat Reader (downloadable
from the Adobe website) or iBooks (an iOS app).
Downloading Nikon Software
For Computer
Download the software from our Download Center at the URL below.
• ViewNX-i: This software enables you to transfer images and movies to your
computer for viewing and editing.
• Capture NX-D: This software enables you to adjust images transferred to your
computer and process RAW images.
For Smart Device
• SnapBridge: When you establish a wireless connection, this app enables you to
upload images and movies to your smart device. See “Connecting to a Smart
Device (SnapBridge)” (A14) for information on how to download the app and
establish a connection.
Visit Our Download Center
http://downloadcenter.nikonimglib.com
Visit our website to download manuals for Nikon imaging
products, computer software, or firmware.
Nikon User Support
If you need any technical assistance with the operation of your Nikon product(s),
please contact one of the Nikon representatives. For information on the Nikon
representatives in your area, please visit
http://www.nikon-asia.com/support.
COOLPIX B700 Model Name: N1513
ii
Introduction
Confirming the Package Contents
In the event that any items are missing, please contact the store where you purchased
the camera.
COOLPIX B700
Digital Camera
Camera Strap
LC-CP29 Lens Cap
(with cord)
EN-EL23 Rechargeable
Li-ion Battery
EH-73P Charging AC
Adapter*
UC-E21 USB Cable
Quick Start Guide
(this manual)
Warranty
* A plug adapter is included if the camera was purchased in a country or region that
requires a plug adapter. The shape of the plug adapter varies with the country or region
of purchase (A4).
NOTE: A memory card is not included with the camera. SD, SDHC, and SDXC memory
cards are referred to as “memory cards” in this manual.
Introduction
iii
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and
education, continually updated information is available online at the following websites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, the Middle East, and Africa: http://www.nikon-asia.com/
Visit these websites to keep up-to-date with the latest product information, tips, answers to
frequently asked questions (FAQs), and general advice on digital imaging and photography.
Additional information may be available from the Nikon representative in your area. Visit the
website below for contact information.
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex
electronic circuitry. Only Nikon brand electronic accessories (including battery chargers,
batteries, AC adapters, and USB cables) certified by Nikon specifically for use with this Nikon
digital camera are engineered and proven to operate within the operational and safety
requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND
MAY VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal
could interfere with normal operation of the camera or result in the batteries overheating,
igniting, rupturing, or leaking.
Holographic seal: Identifies this
device as an authentic Nikon product.
For more information about Nikon brand accessories, contact a local authorized Nikon
dealer.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the
camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon
will not be held liable for damages or lost profits that may result from product malfunction.
iv
Introduction
About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form, by
any means, without Nikon’s prior written permission.
• Illustrations and screen content shown in this manual may differ from the actual product.
• Nikon reserves the right to change the specifications of the hardware and software
described in these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
• While every effort was made to ensure that the information in these manuals is accurate
and complete, we would appreciate it were you to bring any errors or omissions to the
attention of the Nikon representative in your area (address provided separately).
Comply with Copyright Notices
Under copyright law, photographs or recordings of copyrighted works made with the
camera can not be used without the permission of the copyright holder. Exceptions apply
to personal use, but note that even personal use may be restricted in the case of
photographs or recordings of exhibits or live performances.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards
does not completely erase the original image data. Deleted files can sometimes be
recovered from discarded storage devices using commercially available software, potentially
resulting in the malicious use of personal image data. Ensuring the privacy of such data is
the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, make
sure to reset all of the camera’s settings in Reset all in the setup menu (A22). After
resetting, erase all data in the device using commercial deletion software, or format the
device in Format memory or Format card in the setup menu (A22), then completely
refill it with images containing no private information (for example, images of empty sky).
Care should be taken to avoid injury or damage to property when physically destroying
memory cards.
Introduction
v
For Your Safety
To prevent damage to property or injury to yourself or to others, read “For Your Safety”
in its entirety before using this product.
Keep these safety instructions where all those who use this product will read them.
DANGER
Failure to observe the precautions marked
with this icon carries a high risk of death or
severe injury.
WARNING
Failure to observe the precautions marked
with this icon could result in death or
severe injury.
CAUTION
Failure to observe the precautions marked
with this icon could result in injury or
property damage.
WARNING
• Do not use while walking or operating a motor vehicle. Failure to observe this
precaution could result in accidents or other injury.
• Do not disassemble or modify this product. Do not touch internal parts that
become exposed as the result of a fall or other accident. Failure to observe these
precautions could result in electric shock or other injury.
• Should you notice any abnormalities such as the product producing smoke, heat,
or unusual odors, immediately disconnect the battery or power source. Continued
operation could result in fire, burns or other injury.
• Keep dry. Do not handle with wet hands. Do not handle the plug with wet hands.
Failure to observe these precautions could result in fire or electric shock.
• Do not let your skin remain in prolonged contact with this product while it is on or
plugged in. Failure to observe this precaution could result in low-temperature
burns.
• Do not use this product in the presence of flammable dust or gas such as propane,
gasoline or aerosols. Failure to observe this precaution could result in explosion or
fire.
• Do not aim the flash at the operator of a motor vehicle. Failure to observe this
precaution could result in accidents.
vi
Introduction
• Keep this product out of reach of children. Failure to observe this precaution could
result in injury or product malfunction. In addition, note that small parts constitute
a choking hazard. Should a child swallow any part of this product, seek immediate
medical attention.
• Do not entangle, wrap or twist the straps around your neck. Failure to observe this
precaution could result in accidents.
• Do not use batteries, chargers, AC adapters, or USB cables not specifically
designated for use with this product. When using batteries, chargers, AC adapters,
and USB cables designated for use with this product, do not:
- Damage, modify, forcibly tug or bend the cords or cables, place them under
heavy objects, or expose them to heat or flame.
- Use travel converters or adapters designed to convert from one voltage to
another or with DC-to-AC inverters.
Failure to observe these precautions could result in fire or electric shock.
• Do not handle the plug when charging the product or using the AC adapter
during thunderstorms. Failure to observe this precaution could result in electric
shock.
• Do not handle with bare hands in locations exposed to extremely high or low
temperatures. Failure to observe this precaution could result in burns or frostbite.
• Do not leave the lens pointed at the sun or other strong light sources. Light
focused by the lens could cause fire or damage the product’s internal parts.
When shooting backlit subjects, keep the sun well out of the frame.
CAUTION
• Turn this product off when its use is prohibited. Disable wireless features when the
use of wireless equipment is prohibited. The radio-frequency emissions produced
by this product could interfere with equipment onboard aircraft or in hospitals or
other medical facilities.
• Remove the battery and disconnect the AC adapter if this product will not be used
for an extended period. Failure to observe this precaution could result in fire or
product malfunction.
• Do not touch moving parts of the lens or other moving parts. Failure to observe
this precaution could result in injury.
• Do not fire the flash in contact with or in close proximity to the skin or objects.
Failure to observe this precaution could result in burns or fire.
• Do not leave the product where it will be exposed to extremely high temperatures,
for an extended period such as in an enclosed automobile or in direct sunlight.
Failure to observe this precaution could result in fire or product malfunction.
Introduction
vii
DANGER for Batteries
• Do not mishandle batteries. Failure to observe the following precautions could
result in the batteries leaking, overheating, rupturing, or catching fire:
- Use only rechargeable batteries approved for use in this product.
- Do not expose batteries to flame or excessive heat.
- Do not disassemble.
- Do not short-circuit the terminals by touching them to necklaces, hairpins, or
other metal objects.
- Do not expose batteries or the products in which they are inserted to powerful
physical shocks.
• Do not attempt to recharge EN-EL23 rechargeable batteries using chargers/
cameras not specifically designated for this purpose. Failure to observe this
precaution could result in the batteries leaking, overheating, rupturing, or
catching fire.
• If battery liquid comes into contact with the eyes, rinse with plenty of clean water
and seek immediate medical attention. Delaying action could result in eye injuries.
WARNING for Batteries
• Keep batteries out of reach of children. Should a child swallow a battery, seek
immediate medical attention.
• Do not immerse this product in water or expose to rain. Failure to observe this
precaution could result in fire or product malfunction. Immediately dry the
product with a towel or similar object should it become wet.
• Discontinue use immediately should you notice any changes in the batteries, such
as discoloration or deformation. Cease charging if they do not charge in the
specified period of time. Failure to observe this precaution could result in the
batteries leaking, overheating, rupturing, or catching fire.
• Prior to disposal, insulate battery terminals with tape. Overheating, rupture, or fire
may result should metal objects come into contact with the terminals. Recycle or
dispose of batteries in accord with local regulations.
• If battery liquid comes into contact with a person’s skin or clothing, immediately
rinse the affected area with plenty of clean water. Failure to observe this
precaution could result in skin irritation.
viii
Introduction
Parts of the Camera
The Camera Body
12 3
5
6
4
7
8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
1
Power switch/power-on lamp
(charge lamp)
2
w1 (function 1) button
3
Mode dial
14 x (monitor) button
4
Flash
15 s (display) button
5
N-Mark (NFC antenna)
16 b (e movie-record) button
6
Shutter-release button
17 Command dial
18 Monitor
7
Zoom control
f : Wide-angle
g : Telephoto
h : Thumbnail playback
i : Playback zoom
8
p (snap-back zoom) button
22 k (apply selection) button
9
Side zoom control
23 d (menu) button
10 m (flash pop-up) button
11 Diopter adjustment control
12 Electronic viewfinder
13 Eye sensor
19 w2 (function 2) button
20 c (playback) button
21 Rotary multi selector (multi selector)
24 l (delete) button
Parts of the Camera
1
Getting Started
How to Attach the Camera Strap and Lens Cap
Attach the lens cap to the strap, and then attach the strap to the camera.
Attach the strap at two places.
B
Lens Cap
At times when you are not shooting images, attach the lens cap to the lens to protect it.
2
Getting Started
Inserting the Battery and Memory Card
Battery latch
Memory card slot
• With the battery’s positive and negative terminals oriented correctly, move the
orange battery latch (3), and fully insert the battery (4).
• Slide the memory card in until it clicks into place (5).
• Be careful not to insert the battery or memory card upside-down or backward, as
this could cause a malfunction.
B
Formatting a Memory Card
The first time you insert a memory card that has been used in another device into this
camera, make sure to format it with this camera.
• Note that formatting a memory card permanently deletes all images and other
data on the memory card. Be sure to make copies of any images you wish to keep
before formatting the memory card.
• Insert the memory card into the camera, press the d button, and select Format card in
the setup menu (A22).
Removing the Battery or Memory Card
Turn the camera off and make sure that the power-on lamp and screen have turned
off, and then open the battery-chamber/memory card slot cover.
• Move the battery latch to eject the battery.
• Gently push the memory card into the camera to partially eject the memory card.
• Be careful when handling the camera, battery, and memory card immediately after
using the camera, as they may be hot.
Getting Started
3
Charging the Battery
Electrical outlet
Charging
AC Adapter
Power-on lamp (charge lamp)
USB cable (included)
If a plug adapter* is included with your camera, securely connect it to the Charging AC
Adapter. Once the two are connected, attempting to forcibly remove the plug adapter
could damage the product.
* The shape of the plug adapter varies according to the country or region in which the
camera was purchased.
This step can be omitted if the plug adapter comes permanently bonded to the
Charging AC Adapter.
• Charging starts when the camera is connected to an electrical outlet while the
battery is inserted, as shown in the illustration. The power-on lamp (charge lamp)
slowly flashes while the battery is charging.
• When charging is complete, the power-on lamp turns off. Unplug the Charging AC
Adapter from the electrical outlet, and disconnect the USB cable.
Charging time is about 3 hours for a fully exhausted battery.
• The battery cannot be charged when the power-on lamp quickly flashes, possibly
due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
4
Getting Started
B
Notes About the USB Cable
• Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21
could result in overheating, fire or electric shock.
• Check the shape and direction of the plugs and do not insert or remove the plugs at an
angle.
B
Notes About Charging the Battery
• The camera can be operated while the battery is charging, but the charging time
increases. The power-on lamp (charge lamp) turns off while the camera is being operated.
- Movies cannot be recorded while the battery is charging.
• Do not, under any circumstances, use another make or model of AC adapter other than
the EH-73P Charging AC Adapter, and do not use a commercially available USB-AC
adapter or a battery charger for a mobile phone. Failure to observe this precaution could
result in overheating or in damage to the camera.
Opening the Monitor
• You can adjust the direction and angle of the monitor. For normal shooting, fold
the monitor against the back of the camera, facing out (5).
• When you are not using or carrying the camera, fold the monitor against the
camera body with the screen facing in (1).
B
Notes About the Monitor
When moving the monitor, do not apply excessive force and move slowly within the
monitor’s adjustable range so that the connection will not be damaged.
Getting Started
5
Camera Setup
1
Press the power switch to turn on the camera.
• Use the multi selector to select and adjust settings.
Power switch
Multi selector
Up
Left
k button
(apply selection)
d button
• A language selection dialog will be displayed. Press
HI on the multi selector to highlight a language
and press the k button to select.
• The language can be changed at any time using
the setup menu (A22) M Language.
Right
Down
Language
Cancel
2
When the dialog at right is displayed,
follow the instructions below and press
the d button or k button.
Use SnapBridge to send photos to your
smart device and share them online.
• If you will not establish a wireless connection with
To skip this screen and set SnapBridge
a smart device: Press the d button and proceed
later from the Network menu, press
MENU.
to step 3.
Later
Set
• If you will establish a wireless connection with a
smart device: Press the k button. See “Connecting
to a Smart Device (SnapBridge)” (A14) for information about the setup procedure.
3
6
When prompted to set the camera clock, press HI to highlight
Yes and press the k button.
Getting Started
4
Highlight your home time zone and
press the k button.
London, Casablanca
• Press H to set daylight saving time. When it is on,
the time is one hour earlier and W is displayed at
the top of the map. Press I to turn daylight saving
time off.
Back
5
6
Press HI to select a date format and press the k button.
Enter the current date and time and
press the k button.
• Press JK to highlight items and press HI to
change.
• Press the k button to set the clock.
Date and time
D
M
Y
01 01 2016
h
m
00 00
Edit
7
When prompted, select Yes and press the k button.
• Setup is complete when the camera switches to the shooting screen.
• The time zone and date can be changed at any time using the setup menu (A22)
M Time zone and date.
Getting Started
7
Basic Shooting and Playback
Operations
Shooting Images
A (auto) mode is used here as an example. A (auto) mode enables you to perform
general shooting in a variety of shooting conditions.
1
Rotate the mode dial to A.
Number of exposures
remaining
• Battery level indicator
b: The battery level is high.
B: The battery level is low.
• Press the s (display) button to switch the
information displayed on the screen each time.
1/250
F5.6
Battery level indicator
2
Hold the camera steady.
• Keep fingers and other objects away from the lens, flash, AF-assist illuminator,
microphone, and speaker.
8
Basic Shooting and Playback Operations
25m 0s
1400
3
Frame the picture.
• Move the zoom control or the side zoom control to change the zoom lens position.
• If you lose sight of the subject while shooting with the lens in telephoto position,
press the p (snap-back zoom) button to temporarily widen the visible area so that
you can frame the subject more easily.
Zoom out
p button
Zoom in
Zoom in
Zoom out
4
Press the shutter-release button
halfway.
• To press the shutter-release button
“halfway” means to press and hold the
button at the point where you feel a
slight resistance.
• When the subject is in focus, the focus
area or focus indicator is displayed in
green.
• When you are using digital zoom, the
camera focuses in the center of the frame
and the focus area is not displayed.
• If the focus area or focus indicator flashes,
the camera is unable to focus. Modify the
composition and try pressing the
shutter-release button halfway again.
5
1/250
F 5.6
Focus area
Without lifting your finger, press the
shutter-release button all the way
down.
Basic Shooting and Playback Operations
9
B
Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing the
remaining recording time flashes while images or movies are being saved. Do not open
the battery-chamber/memory card slot cover or remove the battery or memory
card while an indicator is flashing. Doing this could result in loss of data, or in damage to the
camera or the memory card.
C
The Auto Off Function
• When no operations are performed for about one minute, the screen turns off, the camera
enters standby mode, and then the power-on lamp flashes. The camera turns off after
remaining in standby mode for about three minutes.
• To turn the screen back on while the camera is in standby mode, perform an operation
such as pressing the power switch or shutter-release button.
C
When Using a Tripod
• We recommend using a tripod to stabilize the camera in the following situations:
- When shooting in dim lighting with the flash mode set to W (off )
- When the zoom is at a telephoto position
• When using a tripod to stabilize the camera during shooting, set Vibration reduction to
Off in the setup menu (A22) to prevent potential errors caused by this function.
Using the Flash
In situations where a flash is needed, such as in dark
locations or when the subject is backlit, press the
m (flash pop-up) button to raise the flash.
• When not using the flash, gently push to lower the
flash until it clicks shut.
Recording Movies
Display the shooting screen and press the
b (e movie-record) button to start recording a
movie. Press the b (e) button again to end
recording.
10
Basic Shooting and Playback Operations
Switching Between the Monitor and Viewfinder
It is recommended that you use the viewfinder
when bright conditions make it difficult to see the
monitor, such as when outdoors in sunlight.
• When you bring your face close to the viewfinder,
the eye sensor responds to it and the viewfinder
turns on, and the monitor turns off (default
setting).
• You can also press the x (monitor) button to
switch the display between the monitor and
viewfinder.
Viewfinder
Diopter Adjustment of the Viewfinder
When the image in the viewfinder is difficult to see,
adjust by rotating the diopter adjustment control
while looking through the viewfinder.
• Take care not to scratch your eye with your
fingertips or nails.
Diopter adjustment control
B
Notes About Checking and Adjusting Image Colors
Use the monitor on the back of the camera because the monitor has higher color
reproducibility than the viewfinder.
Basic Shooting and Playback Operations
11
Playing Back Images
1
Press the c (playback) button
to enter playback mode.
• If you press and hold down the c
button while the camera is turned off,
the camera turns on in playback mode.
2
Use the multi selector to select an
image to display.
• Press and hold down HIJK to scroll through
the images quickly.
• Images can also be selected by rotating the
multi selector.
• Press the s (display) button to switch the
information displayed on the screen each time.
• To play back a recorded movie, press the
k button.
• To return to shooting mode, press the c button
or shutter-release button.
Display the previous image
Display the next image
• Move the zoom control toward g (i)
in full-frame playback mode to zoom
in on an image.
3.0
• In full-frame playback mode, move the
zoom control toward f (h) to
switch to thumbnail playback mode
and display multiple images on the
screen.
12
Basic Shooting and Playback Operations
1/20
Deleting Images
1
Press the l (delete) button to
delete the image currently
displayed on the screen.
2
Use the multi selector HI to select the
desired deletion method and press the
k button.
• To exit without deleting, press the d button.
Delete
Current image
Erase selected images
All images
3
Select Yes and press the k button.
• Deleted images cannot be recovered.
Erase 1 image?
Yes
No
B
Notes About Deleting Images Simultaneously Saved in RAW and JPEG
When using this camera to delete images captured using RAW + Fine or RAW + Normal in
the Image quality setting, both of the simultaneously saved RAW and JPEG images are
deleted. You cannot delete only one format.
B
Deleting Images Captured Continuously (Sequence)
• Images captured continuously are saved as a sequence,
and only the first image of the sequence (the key picture)
is displayed in playback mode (default setting).
• If you press the l button while a key picture is displayed for a
sequence of images, all images in the sequence are deleted.
• To delete individual images in a sequence, press the
k button to display them one at a time and press the
l button.
C
1/5
0004.JPG
15/11/2016 15:30
Deleting the Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was saved.
Basic Shooting and Playback Operations
13
Connecting to a Smart Device
(SnapBridge)
Installing the SnapBridge App
When you install the SnapBridge app and establish a wireless
connection between a SnapBridge-supported camera and smart
device, you can upload images captured with the camera to the smart
device, or use the smart device to release the camera shutter (A18).
• Procedures are described using the SnapBridge app Version 2.0. Use
the latest version of the SnapBridge app. The operating procedures may vary
depending on the camera’s firmware, version of the SnapBridge app, or OS of the
smart device.
• See the documentation provided with the smart device for information on how to
use it.
1
Install the SnapBridge app on the smart device.
• Download the app from the Apple App Store® for iOS, and from Google Play™ for
Android™. Search for “snapbridge” and then install it.
• Visit the applicable download site for more information about supported OS
versions.
• The “SnapBridge 360/170 app” cannot be used with this camera.
2
Enable Bluetooth and Wi-Fi on the smart device.
• Use the SnapBridge app to connect to the camera. You cannot connect
from the Bluetooth settings screen on the smart device.
C Screens in the SnapBridge App
1 You can view notices from Nikon and the SnapBridge
app Help, as well as configure the app’s settings.
2 Primarily perform connection settings for smart
devices and cameras.
3 You can view, delete, or share images downloaded
from the camera.
14
Connecting to a Smart Device (SnapBridge)
1
2
3
Connecting the Camera and a Smart Device
• Use a sufficiently charged battery so that the camera does not turn off during the
procedure.
• Insert a memory card with sufficient free space into the camera.
1
Camera: Select Network menu (A22)
M Connect to smart device, and press
the k button.
Airplane mode
Connect to smart device
Send while shooting
• The dialog in step 2 is displayed when you turn on
the camera for the first time. This step is
unnecessary in such cases.
2
Wi-Fi
Bluetooth
Restore default settings
Camera: Press the k button when the
dialog on the right is displayed.
Use SnapBridge to send photos to your
smart device and share them online.
To skip this screen and set SnapBridge
later from the Network menu, press
MENU.
Later
• A dialog prompting you whether to use the NFC
function is displayed. If you will use the NFC
function, touch the NFC antenna of the smart
device to Z (N-mark) on the camera. When Start
pairing? is displayed on the smart device, tap OK
and proceed to step 7. If you will not use the NFC
function, press the k button.
NFC enabled devices: touch
the camera to the smart device.
Non-NFC enabled devices: press OK.
Cancel
3
Camera: Confirm that the dialog on the
right is displayed.
• Prepare the smart device and proceed to the next
step.
Set
Next
App
SnapBridge
Camera
On your smart device, go to the app
store and search for SnapBridge. After
installing, open the SnapBridge app.
Cancel
Connecting to a Smart Device (SnapBridge)
15
4
Smart device: Launch the SnapBridge app and
tap Pair with camera.
• When the dialog to select a camera is displayed, tap the
camera you want to connect to.
• If you did not connect to the camera by tapping Skip at
the upper-right of the screen when launching the
SnapBridge app for the first time, tap Pair with camera in
the A tab and proceed to step 5.
5
Smart device: In the Pair with camera screen,
tap the camera name.
• For iOS, if a dialog explaining the procedure is displayed
when connecting, confirm the details and tap
Understood (if it is not displayed, scroll down the screen).
Tap the camera name again when the screen to select an
accessory is displayed (it may take some time for the
camera name to be displayed.).
6
Camera/smart device:
Confirm that the
camera and smart
device display the
same number (six
digits).
Auth. code
123456
Confirm that the same authentication
code is displayed on the smart device
and press OK.
Cancel
OK
• For iOS, the number may
not be displayed on the smart device depending on the OS version. Proceed to step
7 in such cases.
7
16
Camera/smart device: Press the
k button on the camera and
PAIR in the SnapBridge app.
Connecting to a Smart Device (SnapBridge)
8
Camera/smart device: Finish the connection settings.
Camera: Press the k button when the dialog on the
right is displayed.
Smart device: Tap OK when the dialog indicating that
pairing is complete is displayed.
Your camera and smart device are
connected!
SnapBridge will send your photos to
your smart device as they are taken.
Next
9
Camera: Follow the on-screen instructions to complete the
setup process.
• To record location data with photographs, select Yes when prompted and enable
the location data features. Enable location data features on the smart device, and in
the A tab of the SnapBridge app M Auto link options M enable Synchronize
location data.
• You can synchronize the camera clock to the time reported by the smart device by
selecting Yes when prompted. In the A tab of the SnapBridge app M Auto link
options M enable Synchronize clocks.
Connecting the camera and smart device is complete.
Still images captured with the camera are automatically uploaded to the
smart device.
C
To Learn More About Using the SnapBridge App and the Camera
• See the online help for details on how to use the SnapBridge app (after connecting, refer
to the SnapBridge app menu M Help).
https://nikonimglib.com/snbr/onlinehelp/en/index.html
• See the documentation “Reference Manual” (PDF format) provided with the camera for
details on how to use it. You can download it from the Download Center.
http://downloadcenter.nikonimglib.com
C
If the Connection Is Unsuccessful
• If the camera displays Could not connect. when connecting
- Press the k button and repeat the procedure from step 2 (A15) in “Connecting the
Camera and a Smart Device” to connect again.
- Press the d button to cancel the connection.
• The issue may be solved by relaunching the app. Close the SnapBridge app completely
and then tap the app icon again to launch it. When the app launches, repeat the
procedure from step 1 (A15) in “Connecting the Camera and a Smart Device.”
Connecting to a Smart Device (SnapBridge)
17
Disabling or Enabling the Wireless Connection
Use any of the following methods to disable or enable the connection.
• Switch the setting in Network menu M Airplane mode in the camera. You can
set it to On to turn off all communication functions in places where wireless
communication is prohibited.
• Switch the setting in Network menu M Bluetooth M Connection in the
camera.
• Switch the setting in the A tab M Auto link options M Auto link in the
SnapBridge app.
You can reduce battery consumption of the smart device by disabling this setting.
Image Upload and Remote Photography
Image Upload
There are three ways to upload images.
• RAW images cannot be uploaded.
Automatically upload images
to the smart device every time
they are captured1, 2
Network menu in the camera M Send while
shooting M set Still images to Yes.
Movies cannot be uploaded automatically.
Select images in the camera
and upload them to the smart
device1, 2
Playback menu in the camera M use Mark for
upload to select images.
Movies cannot be selected for upload.
Use the smart device to select
images in the camera and
download them to the smart
device
A tab in the SnapBridge app M tap Download
pictures.
A dialog related to Wi-Fi connections is displayed. Tap
OK3 and select images.
1
2
The size of images that are uploaded is 2 megapixels.
When Network menu M Bluetooth M Send while off in the camera is set to On,
images are uploaded to the smart device automatically even when the camera is turned
off.
3 Depending on the iOS version, you must select the camera SSID when you tap OK.
See “If a Dialog Related to Wi-Fi Connections Is Displayed in iOS” (A19).
B
Notes About When in a Wi-Fi Connection
• If the smart device enters sleep mode or you switch from the SnapBridge app to another
app, the Wi-Fi connection will be disconnected.
• Some functions of the SnapBridge app cannot be used during a
Wi-Fi connection. To cancel a Wi-Fi connection, tap the A tab
M F M Yes.
18
Connecting to a Smart Device (SnapBridge)
Remote Photography
You can tap the A tab in the SnapBridge app M Remote photography to release
the camera shutter using a smart device.
• Follow the instructions in the SnapBridge app to switch to a Wi-Fi connection. In
iOS, a dialog related to Wi-Fi connections may be displayed. In such a case, see “If a
Dialog Related to Wi-Fi Connections Is Displayed in iOS” (A19).
• You cannot perform remote photography if a memory card is not inserted in the
camera.
If a Dialog Related to Wi-Fi Connections Is Displayed in
iOS
The SnapBridge app normally connects the camera and smart device via Bluetooth.
However, switch to a Wi-Fi connection when using Download pictures or remote
photography. Depending on the iOS version, you must switch the connection
manually. In such a case, use the following procedure to set the connection.
1
Write down the camera SSID (camera name at
default) and password displayed in the smart
device, and then tap View options.
• You can change the SSID or password by using Network
menu M Wi-Fi M Network settings in the camera. To
protect your privacy, we recommend that you change the
password regularly. Disable the wireless connection when
changing the password (A18).
2
Select the SSID you wrote down in step 1 from
the list of connections.
• When you connect for the first time, input the password
you wrote down in step 1 while taking note of uppercase
and lowercase characters. Inputting the password is
unnecessary after the first time connecting.
• The Wi-Fi connection is complete when G is displayed
next to the camera SSID as shown in the screen on the
right. Return to the SnapBridge app and operate the app.
Connecting to a Smart Device (SnapBridge)
19
Other Functions
Selecting a Shooting Mode
You can rotate the mode dial to align the desired shooting mode with the indicator
mark on the camera body.
• A (Auto) mode
Select this mode to perform general shooting in a variety of shooting conditions.
• y, X, s, and c (Scene) modes
Select any one of scene modes based on the shooting conditions, and you can
take pictures with the appropriate settings for those conditions.
- y: Press the d button and select a scene mode. When using Scene
auto selector, the camera recognizes the shooting conditions when you frame
a picture, and you can take pictures in accordance with the conditions.
- X (night landscape): Use this mode to shoot night landscapes.
- s (night portrait): Use this mode to shoot evening and night portraits that
include background scenery.
- c (landscape): Use this mode to shoot landscapes.
• p (Creative) mode
Apply effects to images during shooting.
• j, k, l, and m modes
Select these modes for greater control over shutter speed and f-number.
• M (User settings) mode
The frequently used settings in j, k, l, and m modes can be saved. To shoot
with the saved settings, rotate the mode dial to M.
20
Other Functions
Setting Shooting Functions with the Multi
Selector
When the shooting screen is displayed, you can press the multi selector H (m) J (n)
I (p) K (o) to set the functions described below.
• m Flash mode
When the flash is raised, the flash mode can be set according to shooting
conditions.
• n Self-timer/Smile timer
- Self-timer: The shutter is automatically released in 10 or 2 seconds.
- Smile timer: The shutter is automatically released when the camera detects a
smiling face.
• p Focus mode
According to the distance to the subject, A (autofocus), D (macro close-up), or
B (infinity) can be set. E (manual focus) can be set when the shooting mode is
j, k, l, m, or M, or when the scene mode is Sports, Fireworks show, Birdwatching, Soft, Selective color, Multiple exp. Lighten, Time-lapse movie
(night sky or star trails), or Superlapse movie.
• o Exposure compensation
You can adjust overall image brightness.
The functions that can be set vary depending on the shooting mode.
Other Functions
21
Menu Operations
You can set the menus listed below by pressing the d (menu) button.
•
•
•
•
•
A Shooting menu1, 2
e Movie menu1
c Playback menu3
q Network menu
z Setup menu
1
2
3
Press the d button when the shooting screen is displayed.
Menu icons and available setting options vary depending on the shooting mode.
Press the d button when the playback screen is displayed.
1
Press the d (menu) button.
• The menu is displayed.
1/250
2
F5.6
25m 0s
1400
Press the multi selector J.
• The current menu icon is displayed
in yellow.
Shooting menu
Image quality
Image size
Picture Control
Custom Picture Control
White balance
Metering
Menu icons
3
Select a menu icon and press
the k button.
Time zone and date
• The menu options become
selectable.
Monitor settings
Set up
Slot empty release lock
EVF auto toggle
Date stamp
Vibration reduction
22
Other Functions
4
Select a menu option and
press the k button.
• Certain menu options cannot be set
depending on the current shooting
mode or the state of the camera.
• Items can also be selected by
rotating the multi selector.
5
Select a setting and press the
k button.
• The setting you selected is applied.
• When you are finished using the
menu, press the d button.
• When a menu is displayed, you can
switch to shooting mode by
pressing the shutter-release button
or b (e) button.
Time zone and date
Slot empty release lock
Monitor settings
EVF auto toggle
Date stamp
Vibration reduction
Date stamp
Date
Date and time
Off
Using the w1 (Function 1)/w2 (Function 2) Buttons
If you press the w1 button or w2 button in j,
k, l, m, or M mode, you can quickly configure the
pre-saved menu options (default setting is
Continuous). To set a different menu option,
select U Fn button and select the desired menu
option.
Other Functions
23
Technical Notes
Notices
Notices for Customers in the U.S.A.
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter of the
proper configuration for the power outlet if needed.
The power supply unit is intended to be correctly orientated in a vertical or floor
mount position.
Federal Communications Commission (FCC) Radio Frequency Interference
Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CAUTIONS
Modifications
The FCC requires the user to be notified that any changes or modifications made to
this device that are not expressly approved by Nikon Corporation may void the user’s
authority to operate the equipment.
24
Technical Notes
Interface Cables
Use the interface cables sold or provided by Nikon for your equipment. Using other
interface cables may exceed the limits of Class B Part 15 of the FCC rules.
Notice for Customers in the State of California
WARNING
Handling the cord on this product will expose you to lead, a chemical known to the
State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A.
Tel: 631-547-4200
Notice for Customers in Canada
CAN ICES-3 B / NMB-3 B
Notices for Customers in Europe
CAUTIONS
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
This symbol indicates that electrical and electronic equipment is to be
collected separately.
The following apply only to users in European countries:
• This product is designated for separate collection at an appropriate
collection point. Do not dispose of as household waste.
• Separate collection and recycling helps conserve natural resources and
prevent negative consequences for human health and the environment that might
result from incorrect disposal.
• For more information, contact the retailer or the local authorities in charge of waste
management.
This symbol on the battery indicates that the battery is to be collected
separately.
The following apply only to users in European countries:
• All batteries, whether marked with this symbol or not, are designated
for separate collection at an appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the retailer or the local authorities in charge of waste
management.
Technical Notes
25
Notes About Wireless Communication
Functions
Restrictions on Wireless Devices
The wireless transceiver included in this product conforms to wireless regulations in
the country of sale and is not for use in other countries (products purchased in the EU
or EFTA can be used anywhere within the EU and EFTA). Nikon does not accept
liability for use in other countries. Users who are unsure as to the original country of
sale should consult with their local Nikon service center or Nikon-authorized service
representative. This restriction applies to wireless operation only and not to any other
use of the product.
Security
Although one of the benefits of this product is that it allows others to freely connect
for the wireless exchange of data anywhere within its range, the following may occur
if security is not enabled:
• Data theft: Malicious third-parties may intercept wireless transmissions to steal user
IDs, passwords, and other personal information.
• Unauthorized access: Unauthorized users may gain access to the network and alter
data or perform other malicious actions. Note that due to the design of wireless
networks, specialized attacks may allow unauthorized access even when security is
enabled. Nikon is not responsible for data or information leaks that may occur
during data transfer.
• Do not access networks that you are not permitted to use, even if they are
displayed on your smartphone or tablet. Doing so may be regarded as
unauthorized access. Only access networks that you are permitted to use.
Personal Information Management and Disclaimer
• User information registered and configured on the product, including wireless LAN
connection settings and other personal information, is susceptible to alteration
and loss resulting from operational error, static electricity, accident, malfunction,
repair or other handling. Always keep separate copies of important information.
Nikon is not responsible for any direct or indirect damages or lost profits resulting
from alteration or loss of content that is not attributable to Nikon.
• Before discarding this product or transferring it to another owner, perform Reset
all in the setup menu (A22) to delete all user information registered and
configured with the product, including wireless LAN connection settings and other
personal information.
• Nikon is not responsible for any damages resulting from unauthorized use of this
product by third parties in the event that the product is stolen or lost.
26
Technical Notes
Precautions when Exporting or Carrying This Product Abroad
This product is controlled by the United States Export Administration Regulations
(EAR). The permission of the United States government is not required for export to
countries other than the following, which as of this writing are subject to embargo or
special controls: Cuba, Iran, North Korea, Sudan, and Syria (list subject to change).
Notice for Customers in the U.S.A. and Canada
Federal Communications Commission (FCC) and Industry of Canada (IC)
Declaration of Conformity
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
FCC/IC RF Exposure Statement
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however, that
these low power wireless devices are absolutely safe. Low power wireless devices
emit low levels of radio frequency energy (RF) in the microwave range while being
used. Whereas high levels of RF can produce health effects (by heating tissue),
exposure of low-level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low-level RF exposures have not found any
biological effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research.
COOLPIX B700, which is equipped with a TYPE1FJ (FCC ID:VPYLB1FJ / IC ID:772CLB1FJ) Wireless LAN Module, has been tested and found to comply with FCC/IC
radiation exposure limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102
of the IC radio frequency (RF) Exposure rules. Please refer to the SAR test report that
was uploaded to FCC website.
Notice for Customers in Europe
Declaration of Conformity (Europe)
Hereby, Nikon Corporation, declares that COOLPIX B700 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. The
declaration of conformity may be consulted at
http://imaging.nikon.com/support/pdf/DoC_B700.pdf.
Technical Notes
27
Notice for Customers in Singapore
This device complies with radio-frequency regulations.
Complies with
IMDA Standards
DA103423
Notice for Customers in Nigeria
This device complies with radio-frequency regulations.
28
Technical Notes
Caring for the Product
Observe the precautions described below in addition to the warnings in “For Your
Safety” (Avi-viii) when using or storing the device.
The Camera
Do Not Apply Strong Impact to the Camera
The product may malfunction if subjected to strong shock or vibration. In addition, do not
touch or apply force to the lens.
Keep Dry
The device will be damaged if immersed in water or subjected to high humidity.
Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building
on a cold day, can cause condensation to form inside the device. To prevent condensation,
place the device in a carrying case or a plastic bag before exposing it to sudden changes in
temperature.
Keep Away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields. Doing so could result in loss of data or camera
malfunction.
Do Not Point the Lens at Strong Light Sources for Extended
Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when
using or storing the camera. Intense light may cause the image sensor to deteriorate or
produce a white blur effect in photographs.
Turn the Product Off Before Removing or Disconnecting the
Power Source or Memory Card
Do not remove the battery while the product is on, or while images are being saved or
deleted. Forcibly cutting power in these circumstances could result in loss of data or in
damage to the memory card or internal circuitry.
Technical Notes
29
Notes About the Monitor
• Monitors (including electronic viewfinders) are constructed with extremely high precision;
at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective.
Hence while these displays may contain pixels that are always lit (white, red, blue, or
green) or always off (black), this is not a malfunction and has no effect on images recorded
with the device.
• Images in the monitor may be difficult to see under bright lighting.
• Do not apply pressure to the monitor, as this could cause damage or malfunction. Should
the monitor break, care should be taken to avoid injury caused by broken glass and to
prevent the liquid crystal from the display touching the skin or entering the eyes or mouth.
The Battery
Precautions for Use
• Note that the battery may become hot after use.
• Do not use the battery at ambient temperatures below 0°C (32°F) or above 40°C (104°F) as
this could cause damage or malfunction.
• If you notice any abnormalities such as excessive heat, smoke, or an unusual smell coming
from the battery, immediately discontinue use and consult your retailer or Nikonauthorized service representative.
• After removing the battery from the camera or optional battery charger, put the battery in
a plastic bag, etc. in order to insulate it.
Charging the Battery
Check the battery level before using the camera and replace or charge the battery if
necessary.
• Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to 95°F)
before use.
• A high battery temperature may prevent the battery from charging properly or
completely, and may reduce battery performance. Note that the battery may become hot
after use; wait for the battery to cool before charging.
When charging the battery inserted into this camera using the Charging AC Adapter or a
computer, the battery is not charged at battery temperatures below 0°C (32°F) or above
50°C (122°F).
• Do not continue charging once the battery is fully charged as this will result in reduced
battery performance.
• The battery temperature may increase during charging. However, this is not a
malfunction.
Carrying Spare Batteries
Whenever possible, carry fully charged spare batteries when taking pictures on important
occasions.
Using the Battery When Cold
On cold days, the capacity of batteries tends to decrease. If an exhausted battery is used at a low
temperature, the camera may not turn on. Keep spare batteries in a warm place and exchange as
necessary. Once warmed, a cold battery may recover some of its charge.
30
Technical Notes
Battery Terminals
Dirt on the battery terminals may prevent the camera from functioning. Should the battery
terminals become dirty, wipe them off with a clean, dry cloth before use.
Charging an Exhausted Battery
Turning the camera on or off while an exhausted battery is inserted in the camera may result
in reduced battery life. Charge the exhausted battery before use.
Storing the Battery
• Always remove the battery from the camera or optional battery charger when it is not
being used. Minute amounts of current are drawn from the battery while it is in the
camera, even when not in use. This may result in excessive battery drain and complete
loss of function.
• Recharge the battery at least once every six months and completely exhaust it before
returning it to storage.
• Put the battery in a plastic bag, etc. in order to insulate it and store it in a cool place. The
battery should be stored in a dry location with an ambient temperature of 15°C to 25°C (59°F
to 77°F). Do not store the battery in hot or extremely cold locations.
Battery Life
A marked drop in the time a fully charged battery retains its charge, when used at room
temperature, indicates that the battery needs to be replaced. Purchase a new battery.
Recycling Used Batteries
Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.
Please recycle used batteries in accordance with local regulations.
The Charging AC Adapter
• The EH-73P Charging AC Adapter is for use only with compatible devices. Do not use with
another make or model of device.
• Do not use any USB cable other than the UC-E21. Using a USB cable other than the UC-E21
could result in overheating, fire or electric shock.
• Do not, under any circumstances, use another make or model of AC adapter other than
the EH-73P Charging AC Adapter, and do not use a commercially available USB-AC
adapter or a battery charger for a mobile phone. Failure to observe this precaution could
result in overheating or in damage to the camera.
• The EH-73P is compatible with AC 100–240 V, 50/60 Hz electrical outlets. When using in
other countries, use a plug adapter (commercially available) as necessary. For more
information about plug adapters, consult your travel agency.
• The symbols on this product represent the following:
D AC, E DC, F Class II equipment (The construction of the product is double-insulated.)
Technical Notes
31
Cleaning and Storage
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Lens/
viewfinder
Avoid touching glass parts with your fingers. Remove dust or lint with a
blower (typically a small device with a rubber bulb attached to one end that
is pumped to produce a stream of air out the other end). To remove
fingerprints or other stains that cannot be removed with a blower, wipe the
lens with a soft cloth, using a spiral motion that starts at the center of the
lens and working toward the edges. If this fails, clean the lens using a cloth
lightly dampened with commercial lens cleaner.
Monitor
Remove dust or lint with a blower. To remove fingerprints and other stains,
clean the monitor with a soft, dry cloth, being careful not to apply pressure.
Body
Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry
cloth. After using the camera at the beach or other sandy or dusty
environment, wipe off any sand, dust, or salt with a dry cloth lightly
dampened with fresh water and dry thoroughly. Note that foreign matter
inside the camera could cause damage not covered by the warranty.
Storage
Remove the battery if the camera will not be used for an extended period. To prevent
mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again. Do not store the camera in any of the following locations:
• Places that are poorly ventilated or subject to humidity of over 60%
• Exposed to temperatures above 50°C (122°F) or below –10°C (14°F)
• Next to equipment that produces strong electromagnetic fields, such as televisions
or radios
For storing the battery, follow the precautions in “The Battery” (A30) in “Caring for
the Product” (A29).
32
Technical Notes
Troubleshooting
If the camera fails to function as expected, check the list of common problems below
before consulting your retailer or Nikon-authorized service representative.
Also, refer to the Reference Manual (PDF format) for further details on how to use this
camera (Aii).
Problem
A
Cause/Solution
The camera is
on but does not
respond.
• Wait for recording to end.
• If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert the
battery or batteries or, if you are using an AC adapter,
disconnect and reconnect the AC adapter.
Note that although any data currently being recorded will
be lost, data that have already been recorded will not be
affected by removing or disconnecting the power source.
–
The camera
cannot be
turned on.
The battery is exhausted.
3, 4, 30
• The camera automatically turns off to save power (auto off
function).
• The camera and battery may not work properly at low
temperatures.
• The inside of the camera has become hot. Leave the camera
off until the inside of the camera has cooled, and then try
turning it on again.
10
The camera
turns off
without
warning.
6
8
10
The monitor or
viewfinder is
blank.
• The camera is off.
• The battery is exhausted.
• The camera automatically turns off to save power (auto off
function).
• You cannot turn on both the monitor and viewfinder at the
same time. It may take a while to switch between the
monitor and viewfinder.
• The camera is connected to a TV or computer.
• Interval timer shooting, Multiple exp. Lighten scene
mode (when Star trails is set) shooting, or time-lapse
movie shooting is in progress.
The camera
becomes hot.
The camera may become hot when used for an extended
period of time such as to shoot movies, or when used in a hot
environment; this is not a malfunction.
Technical Notes
30
–
–
–
–
–
33
Memory Cards That Can Be Used
The camera supports SD, SDHC, and SDXC memory cards.
• The camera supports UHS-I.
• Memory cards with an SD Speed Class rating of 6 or faster are recommended for
recording movies (when recording 4K UHD movies at an image size/frame rate of
2160/30p or 2160/25p, cards rated UHS Speed Class 3 or faster are
recommended). When using a memory card with a lower Speed Class rating,
movie recording may stop unexpectedly.
• If you use a card reader, make sure that it is compatible with your memory card.
• Contact the manufacturer for information on features, operation, and limitations
on use.
Trademark Information
• Windows is either a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
• The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Nikon Corporation is under
license.
• Apple®, App Store®, the Apple logos, Mac, OS X, macOS, iPhone®, iPad®, iPod
touch® and iBooks are trademarks or registered trademarks of Apple Inc., in the
U.S. and other countries.
• Android and Google Play are trademarks or registered trademarks of Google
Inc. The Android robot is reproduced or modified from work created and
shared by Google and used according to terms described in the Creative
Commons 3.0 Attribution License.
• iOS is a trademark or registered trademark of Cisco Systems, Inc., in the United
States and/or other countries and is used under license.
• Adobe, the Adobe logo, and Reader are either trademarks or registered
trademarks of Adobe Systems Incorporated in the United States and/or other
countries.
• SDXC, SDHC, and SD Logos are trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
34
Technical Notes
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi
Alliance.
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the
United States and in other countries.
• All other trade names mentioned in this manual or the other documentation
provided with your Nikon product are the trademarks or registered trademarks
of their respective holders.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic
accessory has been designed to connect specifically to iPod, iPhone, or iPad,
respectively, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless performance.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal and
non-commercial use of a consumer to (i) encode video in compliance with the AVC
standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was obtained from a video
provider licensed to provide AVC video. No license is granted or shall be implied for
any other use. Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com.
FreeType License (FreeType2)
Portions of this software are copyright © 2012 The FreeType Project
(http://www.freetype.org). All rights reserved.
MIT License (HarfBuzz)
Portions of this software are copyright © 2016 The HarfBuzz Project
(http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved.
Technical Notes
35
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
Printed in China
CT7J05(11)
6MN66211-05