Nikon COOLPIX P520 Reference Manual (complete instructions)

DIGITAL CAMERA
Reference Manual
En
Introduction
Parts of the Camera and Main Functions
The Basics of Shooting and Playback
Shooting Features
Playback Features
Recording and Playing Back Movies
Using GPS
General Camera Setup
Reference Section
Technical Notes and Index
i
Introduction
Read This First
Introduction
Thank you for purchasing the Nikon COOLPIX P520 digital camera.
Before using the camera, please read the information in “For Your Safety” (Avi to
viii) and familiarize yourself with the information provided in this manual. After
reading, please keep this manual handy and refer to it to enhance your enjoyment
of your new camera.
ii
Read This First
About This Manual
Other Information
• Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used in this manual:
Icon
Introduction
If you want to start using the camera right away, see “The Basics of Shooting and
Playback” (A16).
See “Parts of the Camera and Main Functions” (A1) for more information on the
names and principle functions of the camera parts.
Description
B
This icon indicates cautions and information that should be read before
using the camera.
C
This icon marks notes, information that should be read before using the camera.
A/E/F
These icons indicate other pages containing relevant information;
E : “Reference Section,” F: “Technical Notes and Index.”
• SD, SDHC and SDXC memory cards are referred to as “memory cards” in this manual.
• The setting at the time of purchase is referred to as the “default setting.”
• The names of menu items displayed in the monitor screen, and the names of
buttons or messages displayed on a computer monitor appear in bold.
• In this manual, images are sometimes omitted from monitor screen samples so
that monitor indicators can be more clearly shown.
• The illustrations of monitor content and camera may differ from the actual
product.
iii
Read This First
Information and Precautions
Life-Long Learning
Introduction
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. Visit the site below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, Charging AC
Adapter and AC adapters) certified by Nikon specifically for use with this Nikon digital camera are
engineered and proven to operate within the operational and safety requirements of this electronic
circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal could
interfere with normal operation of the camera or result in the batteries overheating, igniting,
rupturing, or leaking.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
Holographic seal: Identifies this
device as an authentic Nikon product.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
• Nikon will not be held liable for any damages resulting from the use of this product.
• Nikon reserves the right to change the specifications of the hardware and software described in
the documentation at any time and without prior notice.
• While every effort was made to ensure that the information in the documentation is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
iv
Read This First
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Introduction
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction of
paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the
prior permission of the government was obtained, the copying or reproduction of unused postage
stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified documents
stipulated by law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies and
private groups, ID cards and tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies, and photographs is governed by national and international
copyright laws. Do not use this product for the purpose of making illegal copies or to infringe
copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or
built-in camera memory does not completely erase the original image data. Deleted files can
sometimes be recovered from discarded storage devices using commercially available software,
potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is
the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or set the Record GPS data of the GPS options (A98) to Off
after formatting the device and then take pictures such as the empty sky or ground surface until the
storage device becomes full. Be sure to also replace any pictures selected for the Select an image
option in the Welcome screen setting (A103). Care should be taken to avoid injury or damage to
property when physically destroying data storage devices.
For the COOLPIX P520, the log data saved on the memory card is handled in the same way as other
data. To erase the log data that is obtained but not stored on the memory card, select Create log
(A102) ➝ End log ➝ Erase log.
v
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
Introduction
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.
WARNINGS
Turn off in the event of
malfunction
Should you notice smoke or an unusual
smell coming from the camera or
Charging AC Adapter, unplug the
Charging AC Adapter and remove the
battery immediately, taking care to
avoid burns. Continued operation
could result in injury. After removing or
disconnecting the power source, take
the equipment to a Nikon-authorized
service representative for inspection.
Do not disassemble
Touching the internal parts of the
camera or Charging AC Adapter could
result in injury. Repairs should be
performed only by qualified
technicians. Should the camera or
Charging AC Adapter break open as the
result of a fall or other accident, take the
product to a Nikon-authorized service
representative for inspection, after
unplugging the product and/or
removing the battery.
vi
Do not use the camera or
Charging AC Adapter in the
presence of flammable gas
Using the camera in the presence of
flammable gases such as propane and
gasoline, as well as flammable sprays or
dust could result in explosion or fire.
Handle the camera strap with
care
Never place the strap around the neck
of an infant or child.
Keep out of reach of children
Do not keep the products within reach
of children. Doing so may cause injury.
Particular care should be taken to
prevent infants from putting the
battery or other small parts into their
mouths.
Do not remain in contact with
the camera, Charging AC
Adapter, or AC adapter for
extended periods while the
devices are on or in use.
Parts of the devices become hot.
Leaving the devices in direct contact
with the skin for extended periods may
result in low-temperature burns.
For Your Safety
• If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty
of water.
Observe the following
precautions when handling
the Charging AC Adapter
• Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
• Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could result
in fire.
• Do not handle the plug or go near
the Charging AC Adapter during
lightning storms. Failure to observe
this precaution could result in
electric shock.
• Do not damage, modify, forcibly tug
or bend the USB cable, place it under
heavy objects, or expose it to heat or
flames. Should the insulation be
damaged and the wires become
exposed, take it to a Nikonauthorized service representative for
inspection. Failure to observe these
precautions could result in fire or
electric shock.
• Do not handle the plug or Charging
AC Adapter with wet hands. Failure
to observe this precaution could
result in electric shock.
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DCto-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.
Introduction
Observe caution when
handling the battery
The battery may leak, overheat, or
explode if improperly handled.
Observe the following precautions
when handling the battery for use in
this product:
• Before replacing the battery, turn the
product off. If you are using the
Charging AC Adapter/AC adapter, be
sure it is unplugged.
• Use only a Rechargeable Li-ion
Battery EN-EL5 (included). Charge
the battery by inserting it into the
camera and connecting the
Charging AC Adapter EH-69P
(included).
• When inserting the battery, do not
attempt to insert it upside down or
backwards.
• Do not disassemble the battery or
attempt to remove or break the
battery insulation or casing.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to water.
• Replace the terminal cover when
transporting the battery. Do not
transport or store with metal objects
such as necklaces or hairpins.
• The battery is prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove the
battery when no charge remains.
• Discontinue use immediately should
you notice any change in the battery,
such as discoloration or deformation.
vii
For Your Safety
Introduction
Use appropriate cables
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.
Handle moving parts with care
Be careful that your fingers or other
objects are not pinched by the lens
cover or other moving parts.
CD-ROMs
The CD-ROMs included with this device
should not be played back on audio CD
equipment. Playing CD-ROMs on an
audio CD player could cause hearing
loss or damage the equipment.
Observe caution when using
the flash
Using the flash close to your subject’s
eyes could cause temporary visual
impairment. Particular care should be
observed if photographing infants,
when the flash should be no less than
1 m (3 ft 4 in.) from the subject.
Do not operate the flash with
the flash window touching a
person or object
Failure to observe this precaution could
result in burns or fire.
Avoid contact with liquid
crystal
Should the monitor break, care should
be taken to avoid injury caused by
broken glass and to prevent liquid
crystal from the monitor touching the
skin or entering the eyes or mouth.
viii
Turn the power off when using
inside an airplane or the
hospital
Turn the power off while inside the
airplane during take off or landing. Also,
before boarding an airplane, set the
GPS tracking information recording
function to OFF. Follow the instructions
of the hospital when using while in a
hospital. The electromagnetic waves
emitted by this camera may disrupt the
electronic systems of the airplane or
the instruments of the hospital.
Remove the Eye-Fi card, which can be
the cause of the disruption, beforehand
if inserted in the camera.
3D Images
Do not continuously view 3D images
recorded with this device for extended
periods, whether on a television,
monitor, or other display. In the case of
children whose visual systems are still
maturing, consult a pediatrician or
ophthalmologist prior to use and
follow their instructions. Prolonged
viewing of 3D images may cause eye
strain, nausea, or discomfort. Cease use
should any of these symptoms occur
and consult a physician if necessary.
Notices
Notices for Customers in the
U.S.A.
SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
INSTRUCTIONS
For connection to a supply not in the
U.S.A., use an attachment plug adapter
of the proper configuration for the
power outlet if needed.
The power supply unit is intended to
be correctly orientated in a vertical or
floor mount position.
Introduction
IMPORTANT SAFETY
INSTRUCTIONS -
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an
experienced radio/television
technician for help.
Federal Communications
Commission (FCC) Radio
Frequency Interference
Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable
protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
CAUTIONS
Modifications
The FCC requires the user to be
notified that any changes or
modifications made to this device that
are not expressly approved by Nikon
Corporation may void the user’s
authority to operate the equipment.
Interface Cables
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
ix
Notices
Introduction
Notice for Customers in the State of
California
WARNING
Handling the cord on this product will
expose you to lead, a chemical known
to the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Nikon Inc.,
1300 Walt Whitman Road,
Melville, New York 11747-3064
USA
Tel: 631-547-4200
Notice for Customers in Canada
CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
x
Notices for Customers in Europe
CAUTIONS
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE
INSTRUCTIONS.
This symbol indicates that
this product is to be collected
separately.
The following apply only to
users in European countries:
• This product is designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
users in European countries:
• All batteries, whether marked with
this symbol or not, are designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
<Important> Notes on GPS
Introduction
b Location name data of this camera
Before using the GPS function, make sure to read “USER LICENSE AGREEMENT FOR
LOCATION NAME DATA” (F15) and agree to the terms.
• The location name information (Point of Interest: POI) stands as of April 2012.
The location name information will not be updated.
• Use location name information only as a guide.
• The location name information (Point of Interest: POI) of the People's Republic of
China (“China”) and the Republic of Korea is not provided for the COOLPIX P520.
b GPS Functions
• Use information measured by the camera as a guideline only.
This information cannot be used for navigation of an airplane, car, and person or
land survey applications.
• When Record GPS data in GPS options of the GPS options menu is set to On,
GPS functions will continue to operate even after the camera is turned off (A99).
The electromagnetic waves emitted from this product may affect the measuring
instruments of an airplane or medical equipment. When use of the product is
prohibited or limited during airplane takeoffs and landings or inside a hospital,
set Record GPS data to Off and then turn off the camera.
• An individual may be identified from still pictures or movies that have been
recorded with location information.
Observe caution when you transfer still pictures or movies recorded with
location information, or GPS log files to a third party or upload them to a network
such as the Internet where the public can view them.
Be sure to read “Disposing of Data Storage Devices” (Av).
b Using the camera overseas
Before taking the camera with GPS function overseas for travel, consult your travel
agency or embassy of the country you are visiting to confirm whether there is any
restriction on use.
For example, you cannot record location information logs without permission from
the government in China. Set the Record GPS data to Off.
• The GPS may not function properly in China and on the borders between China
and neighboring countries (as of December 2012).
xi
Table of Contents
Introduction .......................................................................................................................................... ii
Introduction
Read This First......................................................................................................................................... ii
About This Manual............................................................................................................................................... iii
Information and Precautions........................................................................................................................ iv
For Your Safety ...................................................................................................................................... vi
WARNINGS ............................................................................................................................................................... vi
Notices ..................................................................................................................................................... ix
<Important> Notes on GPS.............................................................................................................. xi
Parts of the Camera and Main Functions.................................................................................... 1
The Camera Body .................................................................................................................................. 1
Principle Functions of the Controls ........................................................................................................... 3
Attaching the Camera Strap and Lens Cap .......................................................................................... 6
Opening and Adjusting the Angle of the Monitor .......................................................................... 7
Using the Viewfinder .......................................................................................................................................... 8
Switching the Monitor Screen (s Button).................................................................................... 9
Basic Menu Operations ..................................................................................................................... 10
Monitor Screen .................................................................................................................................... 12
The Basics of Shooting and Playback........................................................................................ 16
Preparation 1 Insert the Battery..................................................................................................... 16
Preparation 2 Charge the Battery.................................................................................................. 18
Preparation 3 Insert a Memory Card............................................................................................ 20
Internal Memory and Memory Cards..................................................................................................... 21
Approved Memory Cards .............................................................................................................................. 21
Step 1 Turn the Camera On ............................................................................................................. 22
Turning the Camera On and Off................................................................................................................ 23
Setting the Display Language, Date, and Time................................................................................ 24
Step 2 Select a Shooting Mode...................................................................................................... 26
Available Shooting Modes............................................................................................................................ 27
Step 3 Frame a Picture....................................................................................................................... 28
Using the Zoom................................................................................................................................................... 29
Step 4 Focus and Shoot .................................................................................................................... 30
Step 5 Play Back Images ................................................................................................................... 32
Step 6 Delete Unwanted Images................................................................................................... 33
xii
Table of Contents
Shooting Features............................................................................................................................ 35
Introduction
A (Auto) Mode.................................................................................................................................... 35
Scene Mode (Shooting Suited to Scenes) .................................................................................. 36
Viewing a Description (Help Information) of Each Scene ......................................................... 36
Characteristics of Each Scene ..................................................................................................................... 37
Using Skin Softening ........................................................................................................................................ 46
Special Effects Mode (Applying Effects When Shooting) ..................................................... 47
j, k, l, m Modes (Setting the Exposure for Shooting)...................................................... 49
M (User Setting Modes) .................................................................................................................... 53
Saving Settings in M Mode .......................................................................................................................... 54
Features That Can Be Set Using the Multi Selector................................................................. 55
Available Functions ........................................................................................................................................... 55
Using the Flash (Flash Modes) .................................................................................................................... 56
Using the Self-timer .......................................................................................................................................... 59
Shooting Smiling Faces Automatically (Smile Timer)................................................................... 60
Using Focus Mode ............................................................................................................................................. 62
Adjusting Brightness (Exposure Compensation) ............................................................................ 64
List of the Default Settings............................................................................................................................ 65
Features That Can Be Set Using the d (Menu) Button (Shooting Mode) .................. 67
Options Available in the Shooting Menu ............................................................................................ 68
Functions That Can Be Set Using the Fn (Function) Button................................................. 71
Changing the Image Quality and Image Size ........................................................................... 72
Image Quality........................................................................................................................................................ 72
Image Size ............................................................................................................................................................... 73
Features Not Available in Combination ...................................................................................... 75
The Control Range of the Shutter Speed (j, k, l, m Modes) ............................................ 78
Focusing on Subject........................................................................................................................... 79
Using the Target Finding AF ........................................................................................................................ 79
Using Face Detection....................................................................................................................................... 80
Focus Lock............................................................................................................................................................... 81
Autofocus ................................................................................................................................................................ 81
Playback Features............................................................................................................................. 82
Playback Zoom..................................................................................................................................... 82
Viewing Several Images (Thumbnail Playback and Calendar Display)............................ 83
Features That Can Be Set Using the d (Menu) Button (Playback Mode) ................... 84
Available Playback Menus ............................................................................................................................. 84
Using the Screen for Selecting Images................................................................................................. 86
Connecting the Camera to a TV, Computer, or Printer.......................................................... 87
Using ViewNX 2.................................................................................................................................... 88
Installing ViewNX 2............................................................................................................................................ 88
Transferring Images to the Computer ................................................................................................... 90
Viewing Images ................................................................................................................................................... 91
xiii
Table of Contents
Recording and Playing Back Movies.......................................................................................... 92
Introduction
Recording Movies ............................................................................................................................... 92
Features That Can Be Set Using the d (Menu) Button (Movie Menu)......................... 96
Available Movie Menus................................................................................................................................... 96
Playing Back Movies........................................................................................................................... 97
Using GPS ............................................................................................................................................ 98
Starting GPS Data Recording.......................................................................................................... 98
Features That Can Be Set Using the d (Menu) Button (GPS Options Menu)......... 101
Options Available in the GPS Options Menu.................................................................................. 101
General Camera Setup.................................................................................................................. 103
The Setup Menu ............................................................................................................................... 103
Reference Section........................................................................................................................ E1
Taking Pictures With Manual Focus......................................................................................... E2
Using Easy Panorama (Shooting and Playing back) .......................................................... E3
Taking Pictures with Easy Panorama................................................................................................. E3
Viewing Easy Panorama (Scroll) ........................................................................................................... E5
Using Panorama Assist................................................................................................................. E6
Playing Images in a Sequence................................................................................................... E8
Editing Still Images..................................................................................................................... E10
Editing Features .......................................................................................................................................... E10
k Quick Retouch: Enhancing Contrast and Saturation................................................... E12
I D-Lighting: Enhancing Brightness and Contrast ............................................................ E12
e Skin Softening: Softening Skin Tones .................................................................................... E13
p Filter Effects: Applying Digital Filter Effects .......................................................................... E14
g Small Picture: Reducing the Size of an Image.................................................................. E15
a Crop: Creating a Cropped Copy................................................................................................. E16
Connecting the Camera to a TV (Viewing Images on a TV) ........................................ E17
Connecting the Camera to a Printer (Direct Print) .......................................................... E19
Connecting the Camera to a Printer.............................................................................................. E19
Printing Individual Images ................................................................................................................... E20
Printing Multiple Images....................................................................................................................... E21
Editing Movies.............................................................................................................................. E24
Extracting Only the Desired Portions of the Movie.............................................................. E24
Saving a Frame from a Movie as a Still Picture ........................................................................ E25
xiv
Table of Contents
Introduction
Shooting Menu (j, k, l or m Mode) ................................................................................ E26
Image Quality and Image Size........................................................................................................... E26
Picture Control (COOLPIX Picture Control) ................................................................................ E26
Custom Picture Control (COOLPIX Custom Picture Control).......................................... E30
White Balance (Adjusting Hue) ......................................................................................................... E31
Metering.......................................................................................................................................................... E33
Continuous Shooting.............................................................................................................................. E34
ISO Sensitivity............................................................................................................................................... E38
Exposure Bracketing ................................................................................................................................ E39
AF Area Mode .............................................................................................................................................. E40
Autofocus Mode......................................................................................................................................... E44
Flash Exp. Comp. ........................................................................................................................................ E45
Noise Reduction Filter............................................................................................................................. E45
Active D-Lighting....................................................................................................................................... E46
Save User Settings/Reset User Settings ....................................................................................... E46
Zoom Memory ............................................................................................................................................ E47
Startup Zoom Position ........................................................................................................................... E47
Movie Menu .................................................................................................................................. E48
Movie Options ............................................................................................................................................. E48
Autofocus Mode......................................................................................................................................... E51
The Playback Menu .................................................................................................................... E52
a Print Order (Creating a DPOF Print Order) .......................................................................... E52
b Slide Show.............................................................................................................................................. E54
d Protect...................................................................................................................................................... E55
f Rotate Image......................................................................................................................................... E55
E Voice Memo............................................................................................................................................. E56
h Copy (Copy Between Internal Memory and Memory Card) ................................... E57
C Sequence Display Options........................................................................................................... E58
x Choose Key Picture............................................................................................................................ E58
GPS Options Menu ..................................................................................................................... E59
GPS Options .................................................................................................................................................. E59
Points of Interest (POI)
(Recording and Displaying Location Name Information)................................................. E60
Create Log (Record the Log of Moving Information).......................................................... E61
View Log.......................................................................................................................................................... E63
Synchronize................................................................................................................................................... E63
The Setup Menu .......................................................................................................................... E64
Welcome Screen ........................................................................................................................................ E64
Time Zone and Date................................................................................................................................ E65
Monitor Settings......................................................................................................................................... E67
Print Date (Imprinting Date and Time on Pictures).............................................................. E68
Vibration Reduction ................................................................................................................................. E69
Motion Detection...................................................................................................................................... E70
AF Assist........................................................................................................................................................... E71
Digital Zoom................................................................................................................................................. E71
Assign Side Zoom Control ................................................................................................................... E72
xv
Table of Contents
Introduction
Sound Settings............................................................................................................................................ E73
Auto Off ........................................................................................................................................................... E73
Format Memory/Format Card............................................................................................................ E74
Language........................................................................................................................................................ E74
TV Settings ..................................................................................................................................................... E75
Charge by Computer............................................................................................................................... E76
Toggle Av/Tv Selection........................................................................................................................... E78
Reset File Numbering.............................................................................................................................. E78
Blink Warning ............................................................................................................................................... E79
Eye-Fi Upload ............................................................................................................................................... E80
Reverse Indicators ..................................................................................................................................... E80
Reset All ........................................................................................................................................................... E81
Firmware Version........................................................................................................................................ E84
Error Messages ............................................................................................................................. E85
File and Folder Names............................................................................................................... E90
Optional Accessories ................................................................................................................. E92
Technical Notes and Index ......................................................................................................... F1
Caring for the Products................................................................................................................. F2
The Camera ....................................................................................................................................................... F2
The Battery......................................................................................................................................................... F3
Charging AC Adapter .................................................................................................................................. F4
The Memory Cards........................................................................................................................................ F5
Caring for the Camera ................................................................................................................... F6
Cleaning .............................................................................................................................................................. F6
Storage ................................................................................................................................................................. F6
Troubleshooting.............................................................................................................................. F7
USER LICENSE AGREEMENT FOR LOCATION NAME DATA............................................... F15
Specifications ................................................................................................................................. F19
Supported Standards ................................................................................................................................ F22
Index .................................................................................................................................................. F24
xvi
Parts of the Camera and Main Functions
The Camera Body
Flash raised
1 2 3
4
5
6
Parts of the Camera and Main Functions
7
8
9
10 11
12 13 14
1
Eyelet for camera strap ................................6
2
Power switch/power-on lamp..............23
3
w (function) button ...................................4
4
Mode dial...........................................................26
5
Microphone (stereo)........................... 85, 92
6
Flash......................................................................56
7
m (flash pop-up) button..........................56
8
USB/Audio video connector ......... 18, 87
9
HDMI mini connector (Type C)............87
10 Connector cover ................................... 18, 87
15
11
Power connector cover (for an optional
AC adapter) ............................................. E92
12 Shutter-release button.........................3, 30
Zoom control ..................................................29
f : Wide ...................................................29
g : Tele......................................................29
13
h: Thumbnail playback.................83
i : Playback zoom.............................82
j : Help ....................................................36
14
Self-timer lamp...............................................59
AF-assist illuminator.................................104
15 Lens
1
The Camera Body
1
2
3
4
5
6
7
8
Parts of the Camera and Main Functions
16
9
17
10 11 12 13 14 15
Charge lamp ................................... 18, E77
Flash lamp.........................................................56
1
Side zoom control..................................... 104
f : Wide ...................................................29
g : Tele......................................................29
10
2
Speaker............................................... 85, 97, 104
12 d (menu) button....................................10
3
Diopter adjustment control......................8
13 l (delete) button.................................. 33,97
4
GPS antenna ...................................................... 99
14 k (apply selection) button .................3, 5
5
Electronic viewfinder ....................................8
6
s (display) button ..................................9
7
b (e movie-record) button
......................................................................... 32, 92
8
Command dial .....................................3, 5, 49
9
Monitor....................................................... 12, 26
11 c (playback) button.........................32, 97
15
Rotary multi selector
(multi selector)*...........................................3, 5
16 Tripod socket
17
Battery-chamber/memory card slot
cover.............................................................16, 20
* The rotary multi selector is sometimes referred to as “multi selector” in this
manual.
2
The Camera Body
Attaching the Camera Strap and Lens Cap
Attach the Lens Cap LC-CP24 to the strap, and then attach the strap to the camera.
Parts of the Camera and Main Functions
Attach the strap at two places.
B Lens Cap
• Remove the lens cap before you shoot a picture.
• At times when you are not shooting pictures such as when the power is off, or while you are
carrying the camera, attach the lens cap to the camera to protect the lens.
• Do not attach other than the lens cap to the lens.
6
The Camera Body
Opening and Adjusting the Angle of the Monitor
The orientation and tilt of the monitor on the camera can be changed. This is
useful when shooting with the camera in a high or a low position, or when taking
self-portraits.
For normal shooting, fold the monitor screen against the camera face out (3).
Parts of the Camera and Main Functions
90°
180°
When you are not using or carrying the camera, fold
the monitor with the screen facing the camera body
to prevent scratches or contamination.
B Note on Monitor
When moving the monitor, do not apply excessive force and turn slowly within the monitor’s
adjustable range so that the connection will not be damaged.
C More Information
See “Using the Viewfinder“ (A8) for more information.
7
The Camera Body
Using the Viewfinder
Parts of the Camera and Main Functions
Use the viewfinder to frame pictures when bright
light makes it difficult to see the display on the
monitor.
When the monitor is stored in the camera by facing
inward, a picture that was displayed on the monitor
is displayed on the viewfinder.
• You cannot turn on both viewfinder and monitor
at the same time.
• While the viewfinder is used, the power-on lamp
(green) lights.
When the image in the viewfinder is difficult to see,
adjust by rotating the diopter adjustment control
while looking through the viewfinder.
• Take care not to scratch your eye with your
fingertips or nails.
8
Diopter adjustment control
Viewfinder
The Camera Body
Switching the Monitor Screen (s Button)
To switch the information displayed on the
monitor screen during shooting and
playback, press the s (display) button.
For Shooting
F5.6
840
Display information
Display the picture and the
shooting information.
Parts of the Camera and Main Functions
25m 0s
25m 0s
1/250
1/250
F5.6
840
Movie frame
Display the range of a
movie in a frame.
Information hidden
Display the picture only.
For Playback
15/05/2013 15:30
0004.JPG
4/ 132
Display photo information
Display the picture and
photo information.
1/250
F5.6
4 132
Tone level information*
(excluding movies)
Display a histogram, tone
level and shooting
information.
Information hidden
Display the picture only.
* See A15 for more information on tone level information.
C Histogram and Framing Grid Displays for Shooting
The display options for the monitor screen can be changed in Monitor settings in the setup menu
(A103). A histogram and framing grid are available as the display options.
9
Basic Menu Operations
Once the menu is displayed, various settings can be changed.
1 Press the d button.
• The menu that matches the status of the camera, such as shooting or playback mode,
is displayed.
Shooting menu
Parts of the Camera and Main Functions
25m 0s
1/250
F5.6
840
Image quality
Image size
Picture Control
Custom Picture Control
White balance
Metering
Continuous
2 Use the multi selector to select a menu
item.
• H or I: Select an item above or below. An item
can also be selected by rotating the multi
Apply selection
selector.
• J or K: Select an item on the left or right, or
move between menu levels.
• k: Apply a selection. Pressing K also applies a selection.
• See “Switching Among Menu Tabs” (A11) for more information.
3 After completing the settings, press the d button or shutter-release
button.
• Press the shutter-release button to display the shooting screen.
C Note on the Command Dial Operation When Menus are Displayed
Rotating the command dial when menus are displayed allows you to change the setting values of a
selected item. There are some setting values that cannot be changed using the command dial.
10
Monitor Screen
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Shooting mode......................................26, 27
Focus mode......................................................63
Zoom indicator ......................................29, 63
Focus indicator...............................................31
AE/AF-L indicator............................45, E7
Zoom memory...............................................69
Flash mode .......................................................57
Flash exp. comp.............................................69
Battery level indicator ................................22
Vibration reduction icon .......................104
Eye-Fi communication indicator
.............................................................. 106, E80
Log display.....................................................102
GPS reception ..............................................100
Noise reduction filter..................................69
Noise reduction burst ................................38
Motion detection icon ...........................104
“Date not set” indicator..................25, 103
Print date.........................................................103
Travel destination indicator.................103
Movie options (normal speed movies)
..................................................................................96
Movie options (HS movies).....................96
Movie length .................................. 92, E50
Image quality ..................................................72
Image size..........................................................73
Easy panorama...............................................43
Number of exposures remaining
(still pictures)............................................22, 74
Internal memory indicator..............22, 92
28 Aperture value............................................... 49
29 Focus area (for center) .......................69, 81
30 Focus area (for manual).............41, 42, 69
Focus area (for auto, target
31 finding AF).........................................31, 69, 79
Focus area (for face detection,
32 pet detection) .........................44, 60, 69, 80
Focus area (for subject
33 tracking)............................................................. 69
34 Center-weighted area ............................... 68
35 Spot metering area..................................... 68
36 Shutter speed................................................. 49
37 ISO sensitivity ................................................. 69
38 Exposure compensation value............ 64
39
40
41
42
43
44
45
46
47
48
49
50
Exposure indicator ...................................... 51
Active D-Lighting......................................... 69
COOLPIX Picture Control......................... 68
White balance ................................................ 68
Continuous shooting mode...........44, 68
Backlighting (HDR)...................................... 38
Exposure bracketing .................................. 69
Hand-held/Tripod.................................37, 40
Self-timer........................................................... 59
Smile timer....................................................... 60
Pet portrait auto release .......................... 44
View/hide histograms............ 103, E67
View/hide framing grid ......... 103, E67
Location name information
(POI information)........................................101
Parts of the Camera and Main Functions
1
2
3
4
5
6
7
8
9
10
13
Monitor Screen
For Playback
Full-frame display (A32)
1
Parts of the Camera and Main Functions
25
24
26
21
20
22
999/ 999
18
17
16
1m 0s
1m 0s
a
b
Date of recording......................................... 24
2
Time of recording ........................................ 24
3
Voice memo indicator............................... 85
4
Battery level indicator ............................... 22
5
8
Protect icon...................................................... 84
Eye-Fi communication indicator
..............................................................106, E80
Recorded GPS information indicator
...............................................................................100
Small picture ...................................84, E15
9
Crop......................................................82, E16
10 Print order icon.............................................. 84
11 Image quality.................................................. 72
12 Image size......................................................... 73
13 Movie options .........................................92, 96
14 Easy panorama indicator......................... 43
(a) Current image number/
total number of images .................... 32
15
(b) Movie length ........................................... 97
14
15
999/ 999
9999/9999
1
7
5
6
15/05/2013 12:00
9999.JP
9999.JPG
23
19
6
4
2 3
7
8
10
11 12
9
13
14
16 Internal memory indicator ..................... 32
Easy panorama playback guide .... E5
17 Sequence playback guide ................ E8
Movie playback guide............................... 97
18 Volume indicator .................................. 85, 97
Location name information
19 (POI information)....................................... 101
20 D-Lighting icon ............................................. 84
21 Quick retouch icon...................................... 84
22 Filter effects icon........................................... 84
23 Skin softening icon...................................... 84
Sequence display (when Individual
24 pictures is set) ........................................ E8
25 3D image indicator ..................................... 45
26 File number and type ........................E90
Monitor Screen
Tone level information display1 (A9)
1
3
4
5
9
1/250
F5.6
4 132
8
7
6
1
ISO sensitivity.................................................. 69
7
Aperture value ............................................... 31
2
Exposure compensation value............ 64
8
Shutter speed ................................................. 31
3
White balance ................................................ 68
9
Shooting mode2 ........................................... 27
4
COOLPIX Picture Control......................... 68
10 Tone level3
5
Image quality/Image size ....................... 72
11 Histogram4
6
Current image number/
total number of images ........................... 32
Parts of the Camera and Main Functions
11
10
2
1
You can check for loss of contrast detail in highlights and shadows from the histogram that
is displayed, or the flashing display for each tone level. These provide guidelines when
adjusting the picture brightness with functions such as exposure compensation.
2 j is displayed when the shooting mode A, y, X, c, R, u or j is selected.
3 The tone level indicates the brightness level. The tone level indicates the brightness level.
When the tone level to check is selected by rotating the multi selector or pressing J or K,
the area of the picture that corresponds to the selected tone level flashes. Press the multi
selector H or I to view the previous or next image.
4 A histogram is a graph showing the distribution of tones in the image. The horizontal axis
corresponds to pixel brightness, with dark tones to the left and bright tones to the right.
The vertical axis shows the number of pixels.
15
The Basics of Shooting and Playback
Preparation 1 Insert the Battery
1 Open the battery-chamber/memory card slot
cover.
The Basics of Shooting and Playback
2 Insert the included battery
(Rechargeable Li-ion Battery
EN-EL5).
• Use the battery to push the orange
battery latch down in the direction
indicated by the arrow (1), and fully
insert the battery (2).
• When the battery is inserted
correctly, the battery latch will lock
the battery in place.
Battery latch
B Inserting the Battery Correctly
Inserting the battery upside down or backwards could damage the camera. Be sure
to check that the battery is in the correct orientation.
3 Close the battery-chamber/memory card slot
cover.
• Charge the battery before the first use or when the
battery is running low (A18).
16
Preparation 1 Insert the Battery
Removing the Battery
Turn the camera off (A23) and be sure that the poweron lamp and the monitor have turned off before
opening the battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/
memory card slot cover and push the orange battery
latch in the direction shown (1). Then, remove the
battery straight (2).
B High Temperature Caution
B Notes on Battery
• Be sure to read and follow the warnings of “For Your Safety” (Avi) thoroughly before using the
battery.
• Be sure to read and follow the warnings for “The Battery” (F3) before using the battery.
The Basics of Shooting and Playback
The camera, battery, and memory card may be hot immediately after using the camera. Observe
caution when removing the battery or memory card.
17
Preparation 2 Charge the Battery
1 Prepare the included Charging AC Adapter EH-69P.
The Basics of Shooting and Playback
If a plug adapter* is included with your camera, attach the plug adapter
to the plug on the Charging AC Adapter. Push the plug adapter firmly
until it is securely held in place. Once the two are connected, attempting
to forcibly remove the plug adapter could damage the product.
* The shape of the plug adapter varies according to the country or
region in which the camera was purchased.
The Charging AC Adapter comes with the plug adapter attached in
Argentina and Korea.
2 Make sure the battery is inserted in the camera, and then connect the
camera to the Charging AC Adapter in order of 1 to 3.
• Keep the camera turned off.
• When connecting the cable, be sure that the plug is properly oriented. Do not use
force when connecting the cable to the camera. When disconnecting the cable, do
not pull the plug at an angle.
Charge lamp
Electrical outlet
USB Cable UC-E6 (included)
• When charging starts, the charge lamp flashes slowly in green.
• About 4 hours and 30 minutes are required to charge a fully exhausted battery.
• When the battery has been completely charged, the charge lamp turns off.
• See “Understanding the Charge Lamp” (A19) for more information.
3 Disconnect the Charging AC Adapter from the electrical outlet and
then disconnect the USB cable.
18
Preparation 2 Charge the Battery
Understanding the Charge Lamp
Status
Description
Flashes slowly (green)
The battery is charging.
Off
The battery is not charging. When charging is complete, the
charge lamp flashing slowly in green stops and is turned off.
B Notes on Charging AC Adapter
• Be sure to read and follow the warnings of “For Your Safety” (Avi) thoroughly before using the
Charging AC Adapter.
• Be sure to read thoroughly and follow the warnings for “Charging AC Adapter” (F4) before use.
B Charging Using Computer or Battery Charger
• You can also charge the Rechargeable Li-ion Battery EN-EL5 by connecting the camera to a
computer (A87, 105).
• The EN-EL5 can be charged without using the camera by using the Battery Charger MH-61
(available separately; E92).
The Basics of Shooting and Playback
• The ambient temperature is not suited to charging. Charge the
battery indoors with an ambient temperature of 5°C to 35°C
(41°F to 95°F).
Flashes quickly (green) • The USB cable or Charging AC Adapter is not properly
connected, or there is a problem with the battery. Disconnect
the USB cable or unplug the Charging AC Adapter and correctly
connect it again, or change the battery.
C Operating the Camera During Charging
The camera does not turn on while the Charging AC Adapter is connected to it even when you press
the power switch. Press and hold the c (playback) button to turn on the camera in playback mode
and play back images. Shooting is not possible.
C AC Power Source
• You can take pictures and play back images while using the AC Adapter EH-62A (available
separately; E92) to power the camera from an electrical outlet.
• Do not, under any circumstances, use another make or model of AC adapter other than the EH-62A.
Failure to observe this precaution could result in overheating or damage to the camera.
19
Preparation 3 Insert a Memory Card
1 Confirm that the power-on lamp and the
monitor are turned off and open the batterychamber/memory card slot cover.
• Be sure to turn off the camera before opening the cover.
2 Insert the memory card.
The Basics of Shooting and Playback
• Slide the memory card until it clicks into
place.
B Inserting the Memory Card
Correctly
Inserting the memory card upside down or
backwards could damage the camera or the
memory card. Be sure to confirm that the
memory card is in the correct orientation.
Memory card slot
3 Close the battery-chamber/memory card slot
cover.
B Formatting a Memory Card
• The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera.
• All data stored on a memory card is permanently deleted when the card is formatted. Be
sure to make copies of any data you wish to keep before formatting the memory card.
• To format a memory card, insert the memory card into the camera, press the d button and
select Format card from the setup menu (A103).
B Note on Memory Cards
Refer to the documentation included with the memory card, as well as “The Memory Cards” (F5) in
“Caring for the Products.”
20
Preparation 3 Insert a Memory Card
Removing Memory Cards
Before opening the battery-chamber/memory card
slot cover, turn the camera off and confirm that the
power-on lamp and the monitor are off.
Press the memory card in lightly with your finger (1)
to partially eject it, and then pull it out straight (2).
B High Temperature Caution
The camera, battery, and memory card may be hot immediately after using the camera. Observe
caution when removing the battery or memory card.
Camera data, including images and movies, can be saved in either the camera’s
internal memory (approximately 15 MB) or on a memory card. To use the camera’s
internal memory for shooting or playback, first remove the memory card.
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved
for use in this camera.
• When recording a movie onto a memory card, a memory card with an SD speed
class of Class 6 or higher is recommended. If the transfer speed of the card is
slow, the movie recording may end unexpectedly.
SD memory cards
SDHC memory cards2
SanDisk
2 GB1
4 GB, 8 GB, 16 GB, 32 GB 64 GB, 128 GB
TOSHIBA
2 GB1
4 GB, 8 GB, 16 GB, 32 GB 64 GB
Panasonic
2 GB1
4 GB, 8 GB, 16 GB, 32 GB 64 GB
Lexar
-
4 GB, 8 GB, 16 GB, 32 GB 64 GB, 128 GB
The Basics of Shooting and Playback
Internal Memory and Memory Cards
SDXC memory cards3
1 Before using a card reader or similar device, check that the device supports 2 GB cards.
2 SDHC-compliant. Before using a card reader or similar device, check that the
device supports SDHC.
3 SDXC-compliant. Before using a card reader or similar device, check that the
device supports SDXC.
• Contact the manufacturer for details on the above cards.
21
Step 1 Turn the Camera On
1 Open the monitor and remove the lens cap.
• See “Opening and Adjusting the Angle of the Monitor“ (A7) for more information.
2 Press the power switch to turn on
the camera.
• If you are turning the camera on for
the first time, see “Setting the Display
Language, Date, and Time” (A24).
• The lens extends, and the monitor is
turned on.
The Basics of Shooting and Playback
3 Check the battery level and number of exposures remaining.
Battery level indicator
25m 0s
1/250
F5.6
840
Number of exposures
remaining
Battery Level
Display
Description
b
Battery level high.
B
Battery level low. Prepare to charge or replace the battery.
N
Battery exhausted.
Cannot take pictures. Charge or replace the battery.
Number of Exposures Remaining
The number of exposures remaining is displayed.
• When a memory card is not inserted, C is displayed and pictures are recorded to the
internal memory (approx. 15 MB).
• The number of pictures that can be stored depends on the remaining capacity of the
internal memory or memory card, the image quality, and the image size (A72).
• The number of exposures remaining shown in the illustration differs from the actual
value.
22
Step 1 Turn the Camera On
Turning the Camera On and Off
C Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will flash. If no operations are performed for another 3 minutes, the
camera will turn off automatically.
• To turn on the monitor again in standby mode, perform either one of the following operations.
- Press the power switch, shutter-release button, c button, or b (e movie-record) button.
- Rotate the mode dial.
• The time that elapses before the camera enters standby mode can be changed using the Auto off
setting in the setup menu (A103).
• By default, the camera enters standby mode in about 1 minute when you are using shooting
mode or playback mode.
• If you are using the AC Adapter EH-62A (available separately), the camera enters standby mode
after 30 minutes. This setting cannot be changed.
The Basics of Shooting and Playback
• When the camera is turned on, the power-on lamp (green) lights and the
monitor is turned on (the power-on lamp turns off when the monitor is turned
on).
• If the power switch is pressed while the monitor is closed with the screen facing
inward, the power-on lamp (green) and viewfinder will light.
• To turn off the camera, press the power switch. Both the monitor and the
power-on lamp are turned off.
• To turn on the camera in playback mode, press and hold the c (playback)
button. At this time, the lens does not extend.
• When Record GPS data in GPS options of the GPS options menu is set to On,
GPS functions will continue to operate even after the camera is turned off
(A99).
C Note on Battery Drain
Battery power drains faster than usual while the camera is recording log data (A102) or using a
Wi-Fi connection.
C Monitor Display
Press the s button to switch between showing and hiding the photo information or shooting
information that is displayed on the monitor screen (A9).
23
Step 1 Turn the Camera On
Setting the Display Language, Date, and Time
Dialogs for language selection and camera clock setting are displayed the first time
the camera is turned on.
1 Press the multi selector H or I to
choose the desired language and
press the k button.
The Basics of Shooting and Playback
2 Press H or I to choose Yes and press the k
button.
Čeština
Dansk
Deutsch
English
Español
Ελληνικά
Cancel
Time zone and date
Choose time zone and
set date and time?
Yes
No
Cancel
3 Press J or K to select your home
time zone, and press the k
button.
• In regions where daylight saving time
applies, press H to enable the daylight
saving time function. W will be
displayed. To disable the daylight saving
time function, press I.
4 Press H or I to choose the date display order
and press the k button or K.
24
Language
London
Casablanca
Back
Date format
Year/Month/Day
Month/Day/Year
Day/Month/Year
Step 1 Turn the Camera On
5 Press H, I, J or K to set date and time, and
press the k button.
• Choose an item: Press K or J (selected in the following
order: D (day) ➝ M (month) ➝ Y (year) ➝ hour ➝
minute).
• Set the contents: Press H or I. Date and time can also
be set by rotating the multi selector or command dial.
• Confirm the settings: Select the minute field and press
the k button or K.
6 Press H or I to choose Yes and press the k
button.
D
15
M
05
Y
2013
10
15
Edit
Date and time
15/05/2013 15:10
OK?
Yes
No
C The Clock Battery
• The camera's clock is powered by an internal backup battery.
The backup battery charges after about 10 hours of charging when the main battery is inserted into
the camera or when the camera is connected to an optional AC adapter. The backup battery
operates the clock for several days.
• If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed
when the camera is turned on. Set the date and time again. See step 2 of “Setting the Display
Language, Date, and Time” (A24) for more information.
The Basics of Shooting and Playback
• After finishing the setting, the lens extends and the
shooting screen is displayed.
Date and time
C Changing the Language Setting and the Date and Time Setting
• You can change these settings using the Language and Time zone and date settings in z setup
menu (A103).
• In the Time zone setting of Time zone and date in z setup menu, when the daylight saving
time function is enabled, the camera’s clock is set forward by one hour, and when disabled, set
back by one hour.
• If you exit without setting the date and time, O flashes when the shooting screen is displayed. Use
the Time zone and date setting in the setup menu to set the date and time.
C Imprinting the Shooting Date in Printed Images
• Set the date and time before shooting.
• You can imprint the shooting date in images as they are captured by setting Print date in the
setup menu.
• If you want the shooting date to be printed without using the Print date setting, print using the
ViewNX 2 software (A88).
25
Step 2 Select a Shooting Mode
Rotate the mode dial to select the shooting mode.
• The following describes how to take pictures in A (auto) mode as an example.
Rotate the mode dial to A.
Auto mode
The Basics of Shooting and Playback
• The camera switches to A (auto) mode and the shooting mode icon changes
to A.
Shooting mode icon
25m 0s
1/250
F5.6
840
• See “Monitor Screen” (A12) for more information.
C Note on the Flash
In situations where a flash is needed, such as in dark locations or when the subject is backlit, be sure
to raise the flash (A56).
26
Step 2 Select a Shooting Mode
Available Shooting Modes
j, k, l, m mode (A49)
Choose these modes for greater control over
shutter speed and aperture value.
Settings in the shooting menu (A67) are
available to suit the shooting conditions and
the type of shot you want to capture.
Shoot easily with basic
camera operations without
going into detailed
settings.
Setting combinations that
are frequently used for
shooting can be saved. The
saved settings can be
immediately retrieved for
shooting simply by rotating
the mode dial to M.
u Special effects
mode (A47)
Effects can be applied to
pictures during shooting.
Scene mode (A36)
When one of the scene modes is selected, pictures are captured using settings that are
optimized for the selected scene.
y (Scene): Choose the desired scene using the scene menu, and the camera's
settings are automatically optimized for the selected scene.
In scene auto selector mode, the camera automatically selects the optimum scene mode
for simpler shooting.
• To select a scene, first rotate the mode dial to y and press the d button.
Select the desired scene by pressing the multi selector H or I, and then press the k
button.
X (Night landscape): Captures the atmosphere of night landscapes.
c (Landscape): Use this mode for vivid landscapes and cityscapes.
R (Backlighting): The flash fires when there is backlight to prevent the subject from being
hidden in shadow, or use the HDR function to shoot when there are very bright areas and
very dark areas in the same frame.
The Basics of Shooting and Playback
A (auto) mode (A35)
M User settings mode
(A53)
C Changing the Settings When Shooting
• Features That Can Be Set Using the Multi Selector ➝ A55
• Features That Can Be Set Using the d (Menu) Button
- Shooting menu ➝ A67, A96
- Setup menu ➝ A103
• Functions That Can Be Set Using the Fn (Function) Button ➝ A71
27
Step 3 Frame a Picture
1 Ready the camera.
• Keep your fingers, hair, strap and other objects away from the lens, flash, AF-assist
illuminator and microphone.
The Basics of Shooting and Playback
2 Frame the picture.
• Point the camera at the subject.
25m 0s
1/250
F5.6
840
C Viewfinder
Use the viewfinder to frame pictures (A8) when bright light makes it difficult to see the display on
the monitor.
C Using a Tripod
• In the following situations, use of a tripod is recommended to avoid the effects of camera shake:
- When shooting in a dark location with the flash lowered, or in a mode in which flash is disabled
- When shooting in the telephoto zoom position
• To take a picture with the camera attached to a tripod, set Vibration reduction in the setup
menu (A103) to Off.
28
Step 3 Frame a Picture
Using the Zoom
The Basics of Shooting and Playback
Rotate the zoom control to activate the optical zoom. Zoom out
Zoom in
• To zoom in so that the subject fills a larger area of
the frame, rotate toward g (telephoto zoom
position).
• To zoom out so that the area visible increases in the
frame, rotate toward f (wide-angle position).
• Rotating the zoom control all the way in either
direction adjusts the zoom quickly, while rotating
the control partially adjusts the zoom slowly (except
during movie recording).
• The zoom can also be operated by rotating the side
zoom control (A2) toward g or f.
The function of the side zoom control can be set in
the Assign side zoom control in the setup menu
(A103).
• Amount of zoom is displayed at the top of the
monitor screen when the zoom control is rotated.
Digital
Optical
• Rotating the zoom control toward g at the
zoom
zoom
maximum optical zoom ratio triggers the digital
zoom and the digital zoom can magnify up to about
2× beyond the maximum magnification of the
optical zoom.
C Digital Zoom and Interpolation
• When the digital zoom is used, the image quality starts to
deteriorate if the zoom position is increased beyond the V
position on the zoom bar.
The V position moves to the right as the image size (A73)
becomes smaller.
• Using Digital zoom in the setup menu (A103), it is possible to set the digital zoom so that it
does not operate.
C More Information
• See "Zoom memory" (A69) for more information.
• See "Startup zoom position" (A69) for more information.
29
Step 4 Focus and Shoot
1 Press the shutter-release button
halfway to adjust the focus.
The Basics of Shooting and Playback
• “Pressing halfway“ is the action of pressing the
shutter-release button slightly until you feel
resistance and then holding in that position.
• When the subject is in focus, the focus area or
focus indicator (A12) lights in green. If the
focus area or focus indicator flashes in red, the
subject is out of focus. Press the shutterrelease button halfway again.
• See “Focus and Exposure” (A31) for more
information.
1/250
F5.6
Focus area
2 Press the shutter-release button all the way to
take a picture.
• “Pressing all the way“ is the action of pressing the
shutter-release button the rest of the way down.
B Note on Recording Images and Saving Movies
The indicator showing the number of exposures remaining or the indicator showing the maximum
movie length flashes while images are being recorded or while a movie is being saved. Do not open
the battery-chamber/memory card slot cover or remove the battery or memory card while an
indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.
C AF-assist Illuminator
In dark places, the AF-assist illuminator (A1, 104) may light when the shutter-release button is
pressed halfway.
C To Make Sure You Do Not Miss a Shot
If you are concerned that you might miss a shot, press the shutter-release button all the way without
first pressing it halfway.
30
Step 4 Focus and Shoot
Focus and Exposure
When the shutter-release button is pressed halfway, the camera sets the focus and
exposure (combination of shutter speed and aperture value). The focus and
exposure remain locked while the shutter-release button is pressed halfway.
1/250
F5.6
Shutter Aperture
speed value
• When j, k, l, m or M mode is selected, the areas to be used for focusing can
be set using AF area mode (A69) in the shooting menu.
• The areas to be used for focusing in scene mode vary depending on the
selected scene (A36).
• In u (special effects) mode, the camera focuses at the center of the
frame.
The Basics of Shooting and Playback
• When the digital zoom is in effect, the camera focuses on the subject at the
center of the frame, and the focus area is not displayed. When the subject is in
focus, the focus indicator lights in green.
• The camera may not be able to focus on certain subjects. See “Autofocus”
(A81) for more information.
• In auto mode, the camera automatically selects the
areas containing the subject closest to the camera out
of 9 focus areas. When the subject is in focus, the
focus areas that are in focus (up to 9 areas) light in
green.
B The Subject Is Too Close to the Camera
If the camera does not focus, try shooting with p (macro close-up) (A63) in the focus mode, or
Close-up (A41) scene mode.
C More Information
See “Focusing on Subject” (A79) for more information.
31
Step 5 Play Back Images
1 Press the c (playback) button.
• When you switch to playback mode, the last
image saved will be displayed in full-frame
playback mode.
2 Use the multi selector to view previous or
next images.
The Basics of Shooting and Playback
• To view previous images: H or J
• To view next images: I or K
• Images can also be selected by rotating the multi
selector.
• To play back images that are saved in the internal
memory, remove the memory card. C is displayed
around “Current image number/total number of
images” on the playback screen.
• To return to shooting mode, press the c button
again, or press the shutter-release button, or b (e
movie-record) button.
15/05/2013 15:30
0004.JPG
4 132
Current image number/
Total number of images
C Viewing Pictures
• Press the s button to switch between showing and hiding the photo information or shooting
information that is displayed on the monitor screen (A9).
• Pictures taken using face detection (A80) or pet detection (A44) will be rotated automatically
when displayed in full-frame playback mode according to the orientation of the face.
• The orientation of an image can be changed using Rotate image in the playback menu (A84).
• Press the k button to display a sequence of images shot continuously as individual images. Press
H on the multi selector to return to the original display (see E8 for more information on the
sequence display).
• Images may be displayed at low resolution immediately after switching to the previous or next image.
32
Step 6 Delete Unwanted Images
1 Press the l button to delete the
image currently displayed on the
monitor.
2 Press the multi selector H or I to select the
desired deletion method and press the k
button.
Delete
3 Press H or I to select Yes and press the k
button.
Erase 1 image?
• Deleted images cannot be recovered.
• To cancel, press H or I to select No and press the k
button.
The Basics of Shooting and Playback
• Current image: Only the current image is deleted.
Current image
If the key picture of a sequence is selected, all images in
Erase selected images
All images
the sequence are deleted.
• Erase selected images: Multiple images can be
selected and deleted. See “Operating the Erase Selected Images Screen” (A34) for
more information.
• All images: All images are deleted.
• To exit without deleting, press the d button.
Yes
No
B Notes on Deletion
• Deleted images cannot be recovered. Transfer important images to a computer before deleting
them.
• Protected images (A84) cannot be deleted.
• When images are taken with continuous shooting, each series of images is treated as a group
(pictures in a sequence) and only the first picture in a group (key picture) is displayed in the default
setting.
When you press the l button during key picture playback, all images in the key picture's
sequence can be deleted.
To delete each picture in a sequence, before pressing the l button, press the k button to display
each image in the sequence individually.
C Deleting the Last Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was saved.
33
Step 6 Delete Unwanted Images
Operating the Erase Selected Images Screen
1 Press the multi selector J or K to select an
image to be deleted, and then press H to
display y.
• To cancel the selection, press I to remove y.
• Rotate the zoom control (A29) toward g (i) to
switch back to full-frame playback or f(h) to display
thumbnails.
Erase selected images
Back
ON/OFF
2 Add y to all images that you want to delete and then press the k
The Basics of Shooting and Playback
34
button to apply the selection.
• A confirmation dialog is displayed. Follow the instructions displayed on the monitor.
Shooting Features
A (Auto) Mode
Shoot easily with basic camera operations without
going into detailed settings.
The camera selects the focus area for autofocus in
accordance with the composition or subject.
• The camera automatically selects the areas
containing the subject closest to the camera out of 9
focus areas.
When the subject is in focus, the focus areas that are in focus (up to 9 areas)
light in green.
• See “Focus and Exposure“ (A31) for more information.
Changing A (Auto) Mode Settings
Shooting Features
• Features That Can Be Set Using the Multi Selector ➝ A55
• Features That Can Be Set Using the d (Menu) Button
- Changing the Image Quality and Image Size ➝ A72
- Setup menu ➝ A103
35
Scene Mode (Shooting Suited to Scenes)
When one of the following scenes is selected using the mode dial or the scene
menu, images are captured using settings that are optimized for the selected
scene.
X Night landscape (A37), c Landscape (A38),
R Backlighting (A38)
Rotate the mode dial to X, c or R and take pictures.
y (Scene)
Press the d button to display the scene menu and choose one of the following
shooting scenes.
Shooting Features
x
b
d
e
f
Z
z
h
i
Scene auto selector (default setting) (A39)
Portrait (A39)
Sports (A40)
Night portrait (A40)
Party/indoor (A40)
Beach (A40)
Snow (A40)
Sunset (A41)
Dusk/dawn (A41)
k Close-up (A41)
u Food (A42)
l Museum (A42)
m Fireworks show (A42)
n Black and white copy (A42)
p Panorama (A43)
O Pet portrait (A44)
s 3D photography (A45)
Scene menu
Scene auto selector
Portrait
Sports
Night portrait
Party/indoor
Beach
Snow
Viewing a Description (Help Information) of Each Scene
Select the desired scene from the scene menu and rotate the zoom control (A1)
toward g (j) to view a description of that scene. To return to the original screen,
rotate the zoom control toward g (j) again.
C More Information
See “Basic Menu Operations“ (A10) for more information.
36
Scene Mode (Shooting Suited to Scenes)
Changing Scene Mode Settings
• Features That Can Be Set Using the Multi Selector ➝ A55
• Features That Can Be Set Using the d (Menu) Button
- Changing the Image Quality and Image Size ➝ A72
- Setup menu ➝ A103
Characteristics of Each Scene
• Use of a tripod is recommended in scene modes with O indicated due to slow
shutter speed.
• Set Vibration reduction in the setup menu (A103) to Off when using a
tripod to stabilize the camera.
• For scene modes that use the flash, be sure to press the m (flash pop-up) button
to raise the flash before shooting (A56).
• Press the d button to select Y Hand-held or Z Tripod in Night landscape.
• Y Hand-held (default setting): This enables you to shoot with the minimum of camera
shake and noise even when holding the camera by hand.
- When the shutter-release button is pressed all the way, pictures are shot continuously,
and the camera combines these pictures to save a single picture.
- Once the shutter-release button is pressed all the way, hold the camera steady without
moving it until a still picture is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the monitor at the time of shooting.
Shooting Features
X Night landscape
• Z Tripod: Select this mode when the camera is stabilized, such as with a tripod.
- Vibration reduction is not used even if Vibration reduction in the setup menu
(A103) is set to Normal or Active.
- Press the shutter-release button all the way to shoot a single picture at a slow shutter
speed.
• When the shutter-release button is pressed halfway, the camera adjusts the focus to
infinity. The focus area or focus indicator (A12) always lights in green.
37
Scene Mode (Shooting Suited to Scenes)
c Landscape
Press the d button to select Noise reduction burst or Single shot in Landscape.
• Noise reduction burst: This enables you to shoot a sharp landscape with a minimum of
noise.
- When the shutter-release button is pressed all the way, pictures are shot continuously,
and the camera combines these pictures to save a single picture.
- Once the shutter-release button is pressed all the way, hold the camera steady without
moving it until a still picture is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the monitor at the time of shooting.
• Single shot (default setting): Records pictures with emphasized outlines and contrast.
- When the shutter-release button is pressed all the way, one frame is taken.
• When the shutter-release button is pressed halfway, the camera adjusts the focus to
infinity. The focus area or focus indicator (A12) always lights in green.
Shooting Features
R Backlighting
• Press the d button to select HDR (high dynamic range) composition using the HDR
setting.
• When HDR is set to Off (default setting): The flash fires to prevent the backlit subject
from being hidden in shadow. Shoot pictures with the flash raised.
• When HDR is set to Level 1-Level 3: Use when taking pictures with very bright and dark
areas in the same frame. Select Level 1 when there is less difference between bright and
dark areas, and Level 3 when there is more difference between bright and dark areas.
• The camera focuses at the center area of the frame.
B Notes on HDR
• Use of a tripod is recommended. Set Vibration reduction in the setup menu (A103) to Off
when using a tripod to stabilize the camera.
• The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that
seen on the monitor at the time of shooting.
• When the shutter-release button is pressed all the way, the camera shoots pictures continuously
and saves the following two images.
- Non-HDR composite image
- HDR composite image (loss of detail is reduced in highlights and shadows)
- If there is only enough memory to save one image, one image processed by D-Lighting (A84)
at the time of shooting, in which dark areas of the image are corrected, is the only image saved.
• Once the shutter-release button is pressed all the way, hold the camera steady without moving it
until a still picture is displayed. After taking a picture, do not turn the camera off before the
monitor switches to the shooting screen.
• Depending on the shooting conditions, dark shadows may appear around bright subjects and
bright areas may appear around dark subjects. You can compensate by lowering the level setting.
• The digital zoom is not available when HDR is set to other than Off.
38
Scene Mode (Shooting Suited to Scenes)
y M x Scene auto selector
When you frame a picture, the camera automatically selects the optimum scene for simpler
shooting.
• When the camera automatically selects a scene mode, the shooting mode icon changes
to that for the scene mode currently enabled.
Portrait (close-up picture of one to two persons)
b
Portrait (shooting a picture of three or more persons or shooting a composition
with a large background area)
f
Landscape
h
Night portrait (close-up picture of one to two persons)
c
Night portrait (shooting a picture of three or more persons or shooting a
composition with a large background area)
g
Night landscape
• The camera shoots images continuously and combines and saves them as one
image in the same way as when Hand-held in X (Night landscape) (A37) is
selected.
i
Close-up
j
Backlighting (shooting non-human subjects)
d
Backlighting (shooting human subjects)
d
Other shooting scenes
Shooting Features
e
• The camera automatically selects the focus area for autofocus in accordance with the
composition. The camera detects and focuses on faces (A80).
• The digital zoom is not available.
C Note on Selecting a Scene Mode Using Scene Auto Selector
Depending upon shooting conditions, the camera may not select the desired scene mode. Should
this occur, switch to A (auto) mode (A26) or select the optimum scene mode for the subject
manually.
y M b Portrait
• The camera detects and focuses on a face (A80).
• The skin softening feature makes the subject's skin appear softer (A46).
• If no faces are detected, the camera focuses on the subject at the center of the frame.
• The digital zoom is not available.
39
Scene Mode (Shooting Suited to Scenes)
y M d Sports
• The camera focuses at the center area of the frame.
• While you continue to hold the shutter-release button all the way, up to 7 pictures are
shot at a rate of about 7 frames per second (fps) (when image quality is set to Normal
and image size is set to r 4896×3672).
• The camera focuses on the subject even when the shutter-release button is not pressed
halfway. You may hear the sound of the camera focusing.
• Focus, exposure, and hue are fixed at the values determined with the first image in each
series.
• The frame rate with continuous shooting may become slow depending upon the current
image quality setting, image size setting, the memory card used, or shooting condition.
y M e Night portrait
Shooting Features
On the screen that is displayed when e Night portrait is selected, select Y Hand-held
or Z Tripod.
• Y Hand-held: Select this mode to hold the camera by hand for shooting pictures.
• Z Tripod (default setting): Select this mode when the camera is stabilized, such as with a
tripod.
- Vibration reduction is not used even if Vibration reduction in the setup menu
(A103) is set to Normal or Active.
• The camera shoots a single picture at a slow shutter speed. Compared to using Tripod,
when Hand-held is selected the camera sets a slightly faster shutter speed in
accordance with the shooting conditions to prevent camera shake.
• The flash always fires. Raise the flash before shooting.
• The camera detects and focuses on a face (A80).
• The skin softening feature makes the skin tones in people's faces appear softer (A46).
• If no faces are detected, the camera focuses on the subject at the center of the frame.
• The digital zoom is not available.
y M f Party/indoor
• The camera focuses at the center area of the frame.
• As images are easily affected by camera shake, hold the camera steadily. Set Vibration
reduction to Off in the setup menu (A103) when shooting using a tripod to stabilize
the camera.
y M Z Beach
• The camera focuses at the center area of the frame.
y M z Snow
• The camera focuses at the center area of the frame.
40
Scene Mode (Shooting Suited to Scenes)
y M h Sunset
O
• When the shutter-release button is pressed halfway, the camera adjusts the focus to
infinity. The focus area or focus indicator (A12) always lights in green.
y M i Dusk/dawn
O
• When the shutter-release button is pressed halfway, the camera adjusts the focus to
infinity. The focus area or focus indicator (A12) always lights in green.
y M k Close-up
Shooting Features
Select Noise reduction burst or Single shot on the screen displayed when k Close-up
scene mode is selected.
• Noise reduction burst: This setting enables you to shoot a sharp picture with a
minimum of noise.
- When the shutter-release button is pressed all the way, pictures are shot continuously,
and the camera combines these pictures to save a single picture.
- Once the shutter-release button is pressed all the way, hold the camera steady without
moving it until a still picture is displayed. After taking a picture, do not turn the camera
off before the monitor switches to the shooting screen.
- If the subject moves or there is a significant camera shake during continuous shooting,
the image may be distorted, overlapped, or blurred.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the monitor at the time of shooting.
• Single shot (default setting): Records pictures with emphasized outlines and contrast.
- When the shutter-release button is pressed all the way, one frame is taken.
• The focus mode (A62) setting is changed to p (macro close-up) and the zoom is
automatically set at a position where the camera can shoot from the closest possible
range.
• You can move the focus area that the camera focuses on. Press the k button and then
rotate the multi selector or press H, I, J or K to move the focus area. To adjust the
following settings, press the k button to temporarily cancel focus area selection, and
then adjust each setting.
- Flash mode (when set to Single shot)
- Self-timer
- Exposure compensation
• The camera focuses on the subject even when the shutter-release button is not pressed
halfway. You may hear the sound of the camera focusing.
41
Scene Mode (Shooting Suited to Scenes)
y M u Food
• The focus mode (A62) setting is changed to p (macro
close-up) and the zoom is automatically set at a position
where the camera can shoot from the closest possible range.
• You can adjust the hue by rotating the command dial. The
hue adjustment setting is saved in the camera’s memory
25m 0s
even after the camera is turned off.
• You can move the focus area that the camera focuses on.
840
1/250 F5.6
Press the k button and then rotate the multi selector or
press H, I, J or K to move the focus area. To adjust the following settings, press the k
button to temporarily cancel focus area selection, and then adjust each setting.
- Hue
- Self-timer
- Exposure compensation
• The camera focuses on the subject even when the shutter-release button is not pressed
halfway. You may hear the sound of the camera focusing.
Shooting Features
y M l Museum
• The camera focuses at the center area of the frame.
• The camera captures up to 10 images while the shutter-release button is pressed all the
way, and the sharpest image in the series is automatically selected and saved (BSS (Best
Shot Selector) (A68)).
y M m Fireworks show
O
• The shutter speed is fixed at 4 seconds.
• The camera focuses at infinity. When the shutter-release button is pressed halfway, the
focus indicator (A12) always lights in green.
y M n Black and white copy
• The camera focuses at the center area of the frame.
• When shooting nearby object, shoot with p (macro close-up) in the focus mode (A62).
42
Scene Mode (Shooting Suited to Scenes)
y M p Panorama
• On the screen that is displayed when p Panorama is selected, select V Easy
panorama or U Panorama assist.
• Panorama assist: Use this mode when shooting a series of pictures that can later be
joined on a computer to form a single panorama.
- Press the multi selector H, I, J or K to select the direction in which pictures are to
be joined and press the k button.
- After shooting the first picture, shoot the necessary number of pictures while
confirming the seams. To finish shooting, press the k button.
- Transfer taken pictures to a computer and use the Panorama Maker software (A89) to
join them in a single panorama.
See “Using Panorama Assist” (E6) for more information.
Shooting Features
• Easy panorama (default setting): You can take a panorama picture simply by moving
the camera in the desired direction.
- Shooting range can be selected from Normal (180°) (default setting) or Wide (360°).
- Press the shutter-release button all the way, remove your finger from the button, and
then slowly pan the camera horizontally. Shooting automatically ends when the
camera captures the specified shooting range.
- When shooting starts, the camera focuses on the subject at the center area of the
frame.
- The zoom is fixed at the wide-angle position.
- When the k button is pressed while the picture recorded with Easy panorama is
displayed in full-frame playback mode, the camera scrolls the displayed area
automatically.
See “Using Easy Panorama (Shooting and Playing back)” (E3).
B Note on Printing Panorama Pictures
When printing panorama pictures, a full view may not be printed depending on the printer settings.
Additionally, printing may not be available depending on the printer.
For more information, see your printer’s manual or contact a digital photo lab.
43
Scene Mode (Shooting Suited to Scenes)
y M O Pet portrait
• When the camera is pointed at a dog or cat, it detects and focuses on its face. In the
default setting, the shutter is automatically released when the camera has focused on the
pet (pet portrait auto release).
• On the screen that appears when O Pet portrait is selected, select Single or
Continuous.
- Single: One picture is captured at a time
- Continuous: The camera automatically captures 3 pictures continuously at a rate of
about 3 frames per second when it has focused on the detected face. When the
shutter is released manually, up to 5 pictures are shot at a rate of about 3 frames per
second while you hold the shutter-release button all the way (when image quality is
set to Normal and image size is set to r 4896×3672).
B Pet Portrait Auto Release
Shooting Features
• To change Pet portrait auto release settings, press the multi selector J (n).
- Y: When the camera detects a pet’s face, it focuses and then releases the shutter automatically.
- OFF: The camera does not release the shutter automatically, even if a pet’s face is detected.
Press the shutter-release button to release the shutter. The camera also detects human faces
(A80). When both human and pet's faces are detected, the camera focuses on the pet's face.
• In the following situations, Pet portrait auto release is automatically switched to OFF.
- When a continuous shooting series with pet portrait auto release is repeated 5 times
- When the internal memory or the memory card is full
To continue shooting with Pet portrait auto release, press the multi selector J (n) to set again.
B Focus Area
• The detected face is framed by a yellow double border (focus
area). When the camera has focused on the face, the double
border turns green.
• When the camera detects more than one face of dog or cat (up
to 5), the largest face displayed on the monitor is framed by a
double border (focus area) and the others by single borders.
• If no human or pet's faces are detected, the camera focuses on
the subject at the center of the frame.
25m 0s
1/250
F5.6
840
B Notes on Pet Portrait
• The digital zoom is not available.
• Under some shooting conditions, such as subject-to-camera distance, speed of moving pets,
direction in which the pets are facing, and brightness of the faces, the camera may be unable to
detect a face, or may display a border around something other than a dog or cat.
B Viewing Pictures Taken Using Pet Detection
44
• During playback, the camera automatically rotates images according to the orientation of the
pet's face detected at the time of shooting (except for pictures taken with continuous shooting).
• When zooming in on an image displayed in full-frame playback mode by rotating the zoom
control toward g (i), the image is enlarged at the center of a pet's face detected during shooting
(A82) (except for pictures taken with continuous shooting).
Scene Mode (Shooting Suited to Scenes)
y M s 3D photography
• The camera takes one picture for each eye to simulate a three-dimensional image on a
3D-compatible TV or monitor.
• After pressing the shutter-release button to shoot the first
frame, move the camera horizontally to the right until the
guide on the screen overlaps the subject.
The camera automatically captures the second image
when it detects that the subject is aligned with the guide.
Cancel
Guide
Shooting Features
• You can move the focus area that the camera focuses on. Press the k button and then
rotate the multi selector or press H, I, J or K to move the focus area. To adjust the
following settings, press the k button to temporarily cancel focus area selection, and
then adjust each setting.
- Focus mode (A (autofocus) or p (macro close-up))
- Exposure compensation
• The focus, exposure, and white balance are fixed when the first frame is shot, and
R is displayed on the screen.
• The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the monitor at the time of shooting.
• Pictures taken in this mode are saved with Normal as the image quality and
O 1920×1080 as the image size.
• The two captured images are saved as a 3D image (MPO file). The first image (the left eye
image) is also saved as a JPEG file.
B Notes on 3D Photography
• Moving subjects are not suited to 3D photography.
• Pictures have a less pronounced 3D feel as the distance between the camera and subject is
increased.
• Pictures may have a less pronounced 3D feel when the subject is dark or when the second picture
is not aligned precisely.
• Pictures taken under dim lighting may appear grainy with noise.
• The telephoto zoom position is restricted to an angle of view equivalent to that of about 135 mm
lens in 35mm [135] format.
• The operation is canceled when the k button is pressed after shooting the first frame or the
camera cannot detect that the guide is on the subject within 10 seconds.
• If the camera does not take the second picture and cancels the shooting even when you align the
guide with the subject, try shooting with the shutter-release button.
• This camera cannot record 3D movies.
45
Scene Mode (Shooting Suited to Scenes)
C Viewing 3D Photography
• 3D images cannot be played back in 3D on the camera monitor screen. Only the left eye image is
displayed during playback.
• To view 3D images in 3D, a 3D-compatible TV or monitor is required. 3D images can be played
back in 3D by connecting the camera to a 3D-compatible TV or monitor using a 3D-compatible
HDMI cable (A87).
• When connecting the camera using an HDMI cable, set the following for the TV settings in the
setup menu (A103).
- HDMI: Auto (default setting) or 1080i
- HDMI 3D output: On (default setting)
• When the camera is connected using an HDMI cable for playback, it may take a while to switch the
display between 3D images and non-3D images. The images played back in 3D cannot be
enlarged.
• See the documentation included with your TV or monitor to perform settings of the TV or monitor.
B Note on Viewing 3D Images
Shooting Features
When viewing 3D images on a 3D-compatible TV or monitor for an extended period of time, you
may experience discomfort such as eye strain or nausea. Carefully read the documentation included
with your TV or monitor to ensure proper use.
Using Skin Softening
In the following shooting modes, the camera detects up to 3 human faces when
the shutter is released, and processes the image to make facial skin tones softer
before saving the image.
• Scene auto selector (A39), Portrait (A39) or Night portrait (A40) in
scene mode
Skin softening can also be applied to saved images (A84).
B Notes on Skin Softening
• It may take more time to save images.
• Under some shooting conditions, the desired skin softening results may not be achieved, and skin
softening may be applied to areas of the image where there are no faces.
46
Special Effects Mode (Applying Effects When Shooting)
The effect can be applied to pictures during shooting. One of the special effects is
selected to shoot.
To select an effect, press the d button to display the special effects menu.
Special effects
Image quality
Image size
Special effects
Special effects
• The camera focuses at the center area of the frame.
Option
Shooting Features
Soft
Nostalgic sepia
High-contrast monochrome
High key
Low key
Selective color
High ISO monochrome
Description
Soft (default setting)
Soften the image by adding a slight blur to the overall image.
Nostalgic sepia
Add a sepia tone and reduces the contrast to simulate the qualities
of an old photograph.
High-contrast
monochrome
Create a black-and-white photograph with a clear contrast.
High key
Give the overall image a bright tone.
Low key
Give the overall image a dark tone.
47
Special Effects Mode (Applying Effects When Shooting)
Option
Description
Shooting Features
Selective color
Create a black and white image in which only the specified color
remains.
• Select a color that you want to
retain from the slider by
rotating the command dial. To
adjust the following settings,
press the k button to
temporarily cancel color
Save
selection, and then adjust each
1/250 F5.6
setting.
- Flash mode (A56)
Slider
- Self-timer (A59)
- Focus mode (A62)
- Exposure compensation (A64)
To return to the color selection screen, press the k button again.
High ISO
monochrome
Create monotone (black and white) pictures by intentionally
taking pictures with high ISO sensitivity. This setting is effective
when shooting subjects in low lighting conditions.
• The pictures taken may contain noise (randomly-spaced bright
pixels, fog or lines).
Silhouette
Create a silhouette photograph of a subject with a bright
background.
Cross process
Create images with an unusual hue by converting a positive color
image into negative or negative color image into positive.
• Rotate the command dial to select hue.
B Special Effects Mode Settings
When Movie options (A96) is set to h/u HS 480/4×, Soft or Nostalgic sepia cannot be
selected.
C More Information
See “Basic Menu Operations“ (A10) for more information.
Changing Special Effects Mode Settings
• Features That Can Be Set Using the Multi Selector ➝ A55
• Features That Can Be Set Using the d (Menu) Button
- Changing the Image Quality and Image Size ➝ A72
- Setup menu ➝ A103
48
j, k, l, m Modes (Setting the Exposure for Shooting)
Pictures can be shot with greater control by setting the
shooting menu (A67) items in addition to setting the
shutter speed or aperture value manually according to
shooting conditions and requirements.
• The focus area for autofocus differs depending on the
setting of AF area mode that can be selected in the
j, k, l or m tab after pressing the d button.
• The camera has 9 focus areas, and when AF area mode is set to Auto (default
setting), it automatically selects the focus areas containing the subject closest to
the camera. When the subject is in focus, the focus areas that are in focus (up to
9 areas) light in green.
Rotate the command dial or multi selector to set the shutter speed and aperture
value.
Shooting Features
The procedure for shooting pictures at the desired brightness (exposure) by
adjusting the shutter speed or aperture value is called “determine exposure.”
The sense of dynamism and amount of background defocus in pictures to be shot
vary depending on the combinations of shutter speed and aperture value even if
the exposure is the same.
The setting method of the flexible program, shutter speed, and aperture value can
49
j, k, l, m Modes (Setting the Exposure for Shooting)
Adjusting the Shutter Speed
In k or m mode, the range is from a maximum of 1/4000 to 8 seconds.
See “The Control Range of the Shutter Speed (j, k, l, m Modes)“ (A78) for
more information.
Faster 1/1000 s
Slower 1/30 s
Adjusting the Aperture Value
Shooting Features
In l and m modes, the range is from f/3 to 8.3 (wide-angle position) and from
f/5.9 to 8.3 (telephoto zoom position).
Larger aperture (Small f-number)
f/3
Smaller aperture (Large f-number)
f/8.3
C Aperture Value (F-number) and Zoom
Large apertures (expressed by small f­numbers) let more light into the camera, and small apertures
(large f-numbers) let less light.
The aperture value of the zoom lens of this camera changes depending on the zoom position. When
zooming to the wide-angle position and telephoto zoom position, the aperture values are f/3 and
f/5.9, respectively.
C M (User settings) Mode
Even when the mode dial is set to M (User settings) mode, you can shoot in j (Programmed auto),
k (Shutter-priority auto), l (Aperture-priority auto) or m (Manual). The setting combinations (User
settings) that are frequently used for shooting can be saved in M (A54).
50
j, k, l, m Modes (Setting the Exposure for Shooting)
j (Programmed auto)
Use for automatic control of the exposure by the camera.
• Different combinations of shutter speed and aperture
value can be selected without changing the exposure
by rotating the command dial (“flexible program”).
25m 0s
While flexible program is in effect, a flexible program
840
1/125 F5.6
mark (A) is displayed next to the mode indicator (j)
in the upper left of the monitor screen.
• To cancel the flexible program, rotate the command dial until the flexible
program mark (A) is no longer displayed. Selecting another shooting mode, or
turning off the camera, also cancels flexible program.
k (Shutter-priority auto)
25m 0s
1/125
F5.6
1/250
F5.6
840
l (Aperture-priority auto)
Use to bring subjects including both the foreground
and background into focus or blur the subject's
background intentionally.
• The aperture value can be adjusted by rotating the
multi selector.
Shooting Features
Use to shoot fast moving subjects with a fast shutter
speed, or use to emphasize the movements of a moving
subject with a slow shutter speed.
• The shutter speed can be adjusted by rotating the
command dial.
25m 0s
840
m (Manual)
Use to control the exposure according to shooting
requirements.
• When adjusting the aperture value or shutter speed,
the degree of deviation from the exposure value
25m 0s
measured by the camera is displayed in the exposure
840
1/125 F5.6
indicator of the monitor screen. The degree of
deviation in the exposure indicator is displayed in EVs
Exposure indicator
(-2 to +2 EV in increments of 1/3 EV).
• The shutter speed can be adjusted by rotating the command dial and the
aperture value can be adjusted by rotating the multi selector.
51
j, k, l, m Modes (Setting the Exposure for Shooting)
B Notes on Shooting
• When zooming is performed after the exposure is set, exposure combinations or aperture value
may be changed.
• When the subject is too dark or too bright, it may not be possible to obtain the appropriate
exposure. In such cases, the shutter speed indicator or aperture value indicator flashes when the
shutter-release button is pressed halfway (except when the m mode is used). Change the shutter
speed setting or aperture value. When settings such as ISO sensitivity (A69) are changed, the
appropriate exposure may be obtained.
B Note on ISO Sensitivity
When ISO sensitivity (A69) is set to Auto or Fixed range auto, the ISO sensitivity in m mode is
fixed at ISO 80.
Changing j, k, l, m Modes
Shooting Features
52
• Features That Can Be Set Using the Multi Selector ➝ A55
• Features That Can Be Set Using the d (Menu) Button
- Shooting menu ➝ A67
- Setup menu ➝ A103
• Functions That Can Be Set Using the Fn (Function) Button ➝ A71
M (User Setting Modes)
Setting combinations that are frequently used for shooting (User settings) can be
saved in M. Shooting is possible in j (Programmed auto), k (Shutter-priority
auto), l (Aperture-priority auto) or m (Manual).
Rotate the mode dial to M to retrieve the settings
saved in Save user settings.
See “Saving Settings in M Mode” (A54) for more
information.
• Frame the subject and shoot with these settings, or
change the settings as required.
• The setting combinations that are retrieved when the mode dial is rotated to M
can be changed as many times as you want in Save user settings.
• Shooting mode j, k, l or m (A49)1
• Zoom position (A29)2
• Flash mode (A56)
• Self-timer (A59)
• Focus mode (A62)3
• Exposure compensation (A64)
• Fn button (A71)
Shooting Features
The following settings can be stored in M.
General setup
Shooting menu
• Image quality (A72)
• Image size (A73)
• Picture Control (A68)
• Custom Picture Control (A68)
• White balance (A68)4
• Metering (A68)
• Continuous (A68)
• ISO sensitivity (A69)
• Exposure bracketing (A69)
• AF area mode (A69)5
• Autofocus mode (A69)
• Flash exp. comp. (A69)
• Noise reduction filter (A69)
• Active D-Lighting (A69)
• Zoom memory (A69)
1
Choose the standard shooting mode. The current flexible program (when set to j), shutter
speed (when set to k or m) or aperture value (when set to l or m) settings will also be
saved.
2 The current zoom position will also be saved. Startup zoom position (A69) cannot be
set.
3 The current focus distance will also be saved when set to E (manual focus).
4 The preset value for preset manual applies commonly to j, k, l, m and M shooting
modes.
5 The current focus area position is saved when AF area mode is set to Manual.
53
M (User Setting Modes)
Saving Settings in M Mode
1 Rotate the mode dial to the desired exposure
mode.
• Rotate to j, k, l or m.
• Settings can be saved even if rotated to M (the default
settings of shooting mode j are saved when the
camera is first purchased).
2 Change to a frequently used combination of shooting settings.
• See A53 for more information about the saved settings.
3 Press the d button.
• The shooting menu is displayed.
Shooting Features
4 Use the multi selector to select Save user
settings, and press the k button.
• Done screen is displayed, and the current settings are
saved.
Shooting menu
Save user settings
Reset user settings
Zoom memory
Startup zoom position
B Clock Battery
If the internal clock battery (A25) is exhausted, the settings saved in M will be reset. Writing down
any important setting is recommended.
C Resetting for User Settings
If Reset user settings is selected, the settings that are saved in the user settings are reset as follows:
• Shooting mode: j (Programmed auto)
• Zoom position: Maximum wide-angle position
• Flash mode: U (auto)
• Focus mode: A (autofocus)
• Exposure compensation: 0.0
• Fn button: Continuous
• Shooting menu: Same as the default setting for each item
54
Features That Can Be Set Using the Multi Selector
Press the multi selector H (m), J (n), I (D) or K (o) while shooting to operate
the following functions.
n Self-timer (A59)/
Smile timer (A60)
m Flash mode (A56)
Auto
Self-timer
o Exposure
compensation (A64)
D Focus mode (A62)
0.0
Exposure compensation
Autofocus
Shooting Features
+0.3
Available Functions
Available functions differ according to the shooting mode as follows.
• See “List of the Default Settings” (A65) for more information on the default
settings in each shooting mode.
Function
A
y, X,
c, R
u
j, k, l, m, M
w
Flash mode (A56)
w
1
Self-timer (A59)
w
w
w
Smile timer (A60)
w
–
w
D
Focus mode (A62)
w
w
w
o
Exposure compensation
(A64)
w
w
w2
m
n
1
1 The setting varies with scene mode or special effects. See “List of the Default Settings”
(A65) for more information.
2 When the shooting mode is m, exposure compensation cannot be used.
55
Features That Can Be Set Using the Multi Selector
Using the Flash (Flash Modes)
You can shoot pictures with a flash by raising the flash. You can set a flash mode
that suits the shooting conditions.
1 Press the m (flash pop-up) button to raise the
flash.
• When the flash is lowered, flash operation is disabled
and S is displayed.
2 Press H (m flash mode) on the multi selector.
Shooting Features
3 Use the multi selector to select the desired
mode and press the k button.
• See “Available Flash Modes” (A57) for more
information.
• If the k button is not pressed within a few seconds,
the selection will be canceled.
Auto
• When U (auto) is applied, D is only displayed for
a few seconds even if monitor indicators (A9) are
turned on.
4 Frame the subject and take a picture.
• The flash lamp indicates the status of the flash when
the shutter-release button is pressed halfway.
- On:
The flash will fire when you press the
shutter-release button all the way.
- Flashing: The flash is charging. The camera cannot
take pictures.
- Off:
The flash will not fire when a picture is
taken.
• If the battery is low, the monitor will be turned off while the flash is charging.
56
Features That Can Be Set Using the Multi Selector
Available Flash Modes
U
Auto
Flash fires automatically when lighting is dim.
V
Auto with red-eye reduction
Best choice for portraits. Reduces red-eye effect caused by flash in portraits (A58).
X
Fill flash
The flash fires when a picture is taken, regardless of how bright the subject is. Use to
“fill-in” (illuminate) shadows and backlit subjects.
Y
Slow sync
Fill flash is combined with a slow shutter speed.
Suitable for portraits of human subjects shot at night or under dim light. Flash
illuminates main subject; slow shutter speeds are used to capture background.
Rear-curtain sync
Fill flash fires just before the shutter closes, creating the effect of a stream of light
behind moving subjects.
C Lowering the Flash
When not using the flash, gently push to lower the flash until it clicks
shut.
Shooting Features
Z
C Effective Range of the Flash
The flash has a range of about 0.5 to 8.0 m (1 ft 8 in. to 26 ft) for wide-angle position, and about 1.5 to
4.5 m (5 ft to 14 ft) for telephoto zoom position (when ISO sensitivity is set to Auto).
57
Features That Can Be Set Using the Multi Selector
C Flash Mode Setting
• The setting varies with shooting mode. See “Available Functions” (A55) and “List of the Default
Settings” (A65) for more information.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A75) for more information.
• The changed flash mode setting applied in the following situations is saved in the camera’s
memory even after the camera is turned off.
- When shooting mode j, k, l or m is used
- When V (auto with red-eye reduction) is selected in A (auto) mode
C Auto with Red-eye Reduction
Shooting Features
58
This camera uses advanced red-eye reduction (“In-Camera Red-Eye Fix”).
If the camera detects “red-eye“ when a picture is taken, Nikon's own In-Camera Red-Eye Fix
processes the image before it is recorded.
Note the following when taking pictures:
• The time required to save the picture increases slightly.
• Advanced red-eye reduction may not produce the desired results in some situations.
• In extremely rare instances, areas not subject to red-eye may be affected by advanced red-eye
reduction processing. In these cases, choose another mode and try again.
Features That Can Be Set Using the Multi Selector
Using the Self-timer
The self-timer is suitable for taking group shots including yourself and reducing the
vibration when the shutter-release button is pressed.
When using the self-timer, use of a tripod is recommended. Set Vibration reduction
in the setup menu (A103) to Off when using a tripod to stabilize the camera.
1 Press J (n self-timer) on the multi selector.
2 Use the multi selector to select n10s (or
n2s) and press the k button.
Shooting Features
• n10s (10 seconds): suitable for group pictures.
• n2s (2 seconds): suitable for preventing camera
shake.
Self-timer
• When the shooting mode is set to Pet portrait in
scene mode, Y (pet portrait auto release) is displayed
(A44). The self-timer is not available.
• The mode selected for the self-timer is displayed.
• If the k button is not pressed within a few seconds, the selection will be canceled.
3 Frame the picture and press the shutter-release button halfway.
• Set the focus and exposure.
4 Press the shutter-release button all
the way.
• The self-timer starts, and the number of
seconds remaining before the shutter is
released is displayed. The self-timer lamp
flashes while the timer is counting down.
About one second before the shutter is
released, the lamp stops flashing and remains
lit.
• When the shutter is released, the self-timer
turns OFF.
• To stop the timer before a picture is taken,
press the shutter-release button again.
9
1/250
F5.6
59
Features That Can Be Set Using the Multi Selector
Shooting Smiling Faces Automatically (Smile Timer)
When this mode is selected, the camera detects smiling faces and automatically
releases the shutter even if you do not press the shutter-release button.
• This function can be used when the shooting mode is A (auto), j, k, l, m, M,
scene mode Portrait or Night portrait.
1 Press J (n self-timer) on the multi selector.
• Change any flash mode, exposure, or shooting menu
settings before pressing n.
2 Use the multi selector to choose a (smile
timer), and press the k button.
Shooting Features
• If the k button is not pressed within a few seconds,
the selection will be canceled.
Smile timer
3 Frame the picture and wait for the subject to
smile without pressing the shutter-release
button.
• When the camera detects a face, a yellow double
25m 0s
border (focus area) is displayed around that face. When
the camera focuses on that face, the double border will
840
1/250 F5.6
turn green for a moment and focus is locked.
• Up to 3 faces are detected. When more than one face is detected, the face closest to
the center of the frame is framed by a double border and the others by single borders.
• If the camera detects that the face framed by the double border is smiling, the shutter
is automatically released.
• Each time the shutter is released, automatic shooting using face detection and smile
detection is repeated.
4 Finish shooting.
• To cancel smile detection and finish shooting, return to step 1 and select OFF.
60
Features That Can Be Set Using the Multi Selector
B Notes on Smile Timer
• The digital zoom is not available.
• Under some shooting conditions, faces and smiling faces may not be detected properly.
• See “Viewing Pictures Taken Using Face Detection” (A80) for more information.
• The smile timer cannot be used simultaneously with certain shooting modes. See “Available
Functions” (A55) and “List of the Default Settings” (A65) for more information.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A75) for more information.
C When the Self-timer Lamp Flashes
When the camera detects a face, the self-timer lamp flashes. The lamp quickly flashes immediately
after the shutter is released.
C Releasing the Shutter Manually
The shutter can also be released by pressing the shutter-release button. If no faces are detected, the
camera focuses on the subject at the center area of the frame.
See “Autofocus” (A81) for more information.
Shooting Features
C More Information
61
Features That Can Be Set Using the Multi Selector
Using Focus Mode
Choose a focus mode according to the desired scene.
1 Press I (p focus mode) on the multi selector.
2 Use the multi selector to choose the desired
focus mode and press the k button.
Shooting Features
62
• See “Available Focus Modes” (A63) for more
information.
• If the k button is not pressed within a few seconds, the
selection will be canceled.
• When A (autofocus) is applied, P is only displayed for
a few seconds even if monitor indicators (A9) are
turned on.
Autofocus
Features That Can Be Set Using the Multi Selector
Available Focus Modes
Autofocus
The camera automatically adjusts the focus according to the distance to the subject.
Use when the distance from the subject to the lens is 50 cm (1 ft 8 in.) or more, or 2.0 m
(6 ft 7 in.) or more at the maximum telephoto zoom position.
D
Macro close-up
Use for close-ups of flowers or small objects.
How close you can be to the subject while shooting depends on the zoom position.
At the zoom position where F and the zoom indicator light in green, the camera can
focus on subjects as close as about 10 cm (4 in.) or farther from the lens. At the G
zoom position, it can focus on subjects as close as about 1 cm (0.4 in.) or farther from
the lens.
B
Infinity
Use when shooting distant scenes through window glass or when shooting landscapes.
The camera automatically adjusts the focus near infinity.
• The camera may not be able to focus on nearby objects.
• The flash does not fire.
E
Manual focus
The focus can be adjusted for any subject that is a distance of 1 cm (0.4 in.) to infinity
from the lens (E2). The closest distance at which the camera can focus varies
depending on the zoom position.
• This function can be used when the shooting mode is j, k, l, m, M, special
effects mode or Sports scene mode.
Shooting Features
A
B Note on Shooting with the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C Focus Mode Setting
• The setting varies with the shooting mode. See “Available Functions” (A55) and “List of the
Default Settings” (A65) for more information.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A75) for more information.
• For shooting modes j, k, l and m, the changed focus mode setting is saved in the camera’s
memory even after the camera is turned off.
C Macro Close-up
In shooting modes such as scene modes that cannot use the Autofocus mode (A69), Full-time
AF may be turned on and the camera will adjust focus even if the shutter-release button is not
pressed halfway when D (macro close-up) is set. You may hear a sound of the camera focusing.
63
Features That Can Be Set Using the Multi Selector
Adjusting Brightness (Exposure Compensation)
By adjusting exposure compensation when taking pictures, you can adjust overall
image brightness.
1 Press K (o exposure compensation) on the
multi selector.
2 Press the multi selector H or I to
Exposure compensation guide
select a compensation value.
Setting
Shooting Features
“+“ side
“-“ side
“0.0“
Explanation
Make the subject brighter than the
exposure set by the camera.
Make the subject darker than the
exposure set by the camera.
Cancel the exposure
compensation.
+0.3
0.0
Exposure compensation
Histogram
Exposure compensation value
3 Press the k button.
• If the k button is not pressed within a few seconds, the selection is set and the
setting menu disappears.
• Even when the shutter-release button is pressed without pressing the k button, a
picture can be shot using the selected compensation value.
• When an exposure compensation value other than 0.0 is applied, the value is
displayed with the H icon on the monitor screen.
4 Press the shutter-release button to take a
picture.
• To turn off exposure compensation, return to step 1
and change the value to 0.0.
25m 0s
C Exposure Compensation Value
840
• The changed exposure compensation value applied in j, k or l mode is saved in the camera's
memory even after the camera is turned off.
• When the shooting mode is the Fireworks show scene mode (A42) or m (Manual) (A51), the
exposure compensation cannot be used.
• When the exposure compensation is set while using a flash, the compensation is applied to both
the background exposure and to the flash output.
64
Features That Can Be Set Using the Multi Selector
C Using the Histogram
A histogram is a graph showing the distribution of tones in the image. Use as a guide when using
exposure compensation and shooting without the flash.
• The horizontal axis corresponds to pixel brightness, with dark tones to the left and bright tones to
the right. The vertical axis shows the number of pixels.
• Increasing exposure compensation value shifts tone distribution to the right, and decreasing it
shifts tone distribution to the left.
List of the Default Settings
The default settings in each shooting mode are described below.
• Similar information about scene mode can be found on the next page.
Shooting mode
Flash mode1
(A56)
Self-timer
(A59)
Focus mode
(A62)
Exposure
compensation
(A64)
U
OFF2
A3
0.0
u (Special
effects) (A47)
W4
OFF
A
0.0
j, k, l, m
(A49)
U
OFF2
A
0.0
M (User settings)
(A53)
U
OFF2
A
0.0
Shooting Features
A (Auto) (A35)
1
When the flash is lowered, you cannot set a flash mode.
Smile timer can also be selected.
3 E (manual focus) cannot be selected.
4 The flash does not fire when High ISO monochrome or Silhouette is selected.
2
• The setting applied in shooting modes j, k, l and m is saved in the camera’s
memory even after the camera is turned off (except for self-timer).
C Features Not Available in Combination
Some features cannot be used in combination with other menu settings (A75).
65
Features That Can Be Set Using the Multi Selector
The default settings in scene mode are described below.
Flash mode1
(A56)
Shooting Features
1
2
3
66
Self-timer
(A59)
Focus mode
(A62)
Exposure
compensation
(A64)
X (A37)
W2
OFF
B2
0.0
c (A38)
W
2
OFF
B2
0.0
R (A38)
X/W3
OFF
A2
0.0
x (A39)
U4
OFF
A2
0.0
b (A39)
V
OFF5
A2
0.0
d (A40)
W2
OFF2
A6
0.0
e (A40)
V7
OFF5
A2
0.0
f (A40)
V8
OFF
A2
0.0
9
0.0
Z (A40)
U
OFF
A
z (A40)
U
OFF
A9
0.0
h (A41)
W2
OFF
B2
0.0
i (A41)
W2
OFF
B2
0.0
k (A41)
W10
OFF
p2
0.0
u (A42)
W
2
OFF
p2
0.0
l (A42)
W2
OFF
A9
0.0
m (A42)
W2
OFF2
B2
0.02
0.0
n (A42)
W
OFF
A9
p (A43)
W11
OFF11
A12
0.0
O (A44)
W2
Y13
A9
0.0
s (A45)
W2
OFF2
A9
0.0
When the flash is lowered, you cannot set a flash mode.
The setting cannot be changed.
Flash is fixed at X (fill flash) when HDR is set to Off, and does not fire when HDR is set to other
than Off.
4 The setting cannot be changed. The camera automatically selects the flash mode appropriate for
the scene it has selected.
5
Smile timer can also be selected.
6 A (autofocus) or E (manual focus) can be selected.
7
The setting cannot be changed. The flash mode setting is fixed at fill flash with slow sync and redeye reduction.
8 May switch to slow sync with red-eye reduction flash mode.
9
A (autofocus) or D (macro close-up) can be selected.
10
Flash does not fire when using Noise reduction burst.
11 The setting cannot be changed when using Easy panorama.
12
The setting cannot be changed when using Easy panorama. A (autofocus), D (macro closeup) or B (infinity) can be selected when using Panorama assist.
13 Pet portrait auto release (A44) can be set to on or off. The self-timer is not available.
Features That Can Be Set Using the d (Menu)
Button (Shooting Mode)
The shooting menu can be set by pressing the d button in shooting mode.
Shooting menu
Image quality
Image size
Picture Control
Custom Picture Control
White balance
Metering
Continuous
25m 0s
1/250
F5.6
840
Available functions differ according to the shooting mode.
Function
j, k, l, m, M
w
w
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w
w3
y 1,
j, c, W
w
w
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
u2
w
w
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Shooting Features
Image quality (A72)
Image size (A73)
Picture Control (A68)
Custom Picture Control (A68)
White balance (A68)
Metering (A68)
Continuous (A68)
ISO sensitivity (A69)
Exposure bracketing (A69)
AF area mode (A69)
Autofocus mode (A69)
Flash exp. comp. (A69)
Noise reduction filter (A69)
Active D-Lighting (A69)
Save user settings (A69)
Reset user settings (A69)
Zoom memory (A69)
Startup zoom position (A69)
A
1
When the mode dial is set to y, the type of scene can be selected. Other settings can
be selected in some scene modes. See “Characteristics of Each Scene” (A37) for more
information.
2 The type of effects can be selected in Special effects mode. See A47 for more
information.
3 This function cannot be set when using M mode.
C Features Not Available in Combination
Some features cannot be used in combination with other menu settings (A75).
C More Information
See “Basic Menu Operations“ (A10) for more information.
67
Features That Can Be Set Using the d (Menu) Button (Shooting Mode)
Options Available in the Shooting Menu
Option
Shooting Features
68
Description
A
Image quality 1
Set the image quality to be recorded (compression ratio)
(A72). The default setting of image quality is Normal.
72
Image size 1
Set the image size to be recorded (A73). The default
setting is r 4896×3672.
73
Picture Control 1
(COOLPIX Picture
Control)
Change the settings for image recording according to the
shooting scene or your preferences. The default setting is
Standard.
E26
Custom Picture
Control
(COOLPIX Custom
Picture Control)
Allow you to store the customized settings based in
COOLPIX Picture Control, which can set picture editing
options for recording images according to the shooting
scene or your preferences.
E30
White balance 1
Adjust colors in the image closer to the colors as they
appear to the eye. Although Auto (normal) (default
setting) can be used under most types of lighting, you can
apply the white balance setting suited to the sky
E31
conditions or light source to achieve better results if the
default setting results are unsatisfactory.
• The preset value for preset manual applies commonly to
j, k, l, m and M shooting modes.
Metering 1
Select the method that the camera uses to measure the
brightness of the subject. The camera adjusts the
E33
exposure, which is a combination of shutter speed and
aperture value, based on the brightness measurement. The
default setting is Matrix.
Continuous 1
Set the mode used for taking a series of pictures.
• The default setting is Single (i.e., only one picture is
captured at a time).
• When Continuous H, Continuous L, Pre-shooting
cache or BSS (A42) is set, the pictures are shot
continuously while the shutter-release button is pressed
all the way.
E34
• If Continuous H: 120 fps, Continuous H: 60 fps or
Multi-shot 16 is set, the specified number of pictures
are shot continuously when the shutter-release button is
pressed all the way.
• If the Intvl timer shooting is set, the pictures are shot
continuously at the set interval of 30 s, 1 min, 5 min or
10 min when the shutter-release button is pressed all
the way once.
Features That Can Be Set Using the d (Menu) Button (Shooting Mode)
A
ISO sensitivity 1
E38
Exposure
bracketing
The exposure (brightness) can be changed automatically
during continuous shooting. The default setting is Off.
E39
AF area mode 1
Set how the camera determines the focus area using the
autofocus to Face priority (A80), Auto, Manual,
Center (normal), Center (wide), Subject tracking or
Target finding AF (A79).
E40
Autofocus mode
When Single AF (default setting) is selected, the camera
focuses only while the shutter-release button is pressed
halfway. When Full-time AF is selected, the camera
focuses even when the shutter-release button is not
pressed halfway. You may hear the sound of the camera
focusing.
E44
Flash exp. comp.
Adjust the flash output. Use this option when the flash is
too bright or too dark. The default setting is 0.0.
E45
Noise reduction
filter
Set the strength of the noise reduction function that is
normally performed when recording the picture. The
default setting is Normal.
E45
Active D-Lighting
Prevent loss of contrast details in highlights and shadows
when shooting images. The default setting is Off.
E46
Save user settings
The current settings are stored in mode dial M (A53).
53
Reset user settings
The settings saved to mode dial M are reset.
54
Zoom memory
If the zoom control is operated when set to On, the camera
changes in steps to the focal length (equivalent to 35mm
[135] format of angle of view) of the zoom lens that is set in
advance. The default setting is Off.
E47
• Select On and press the k button to display the screen
for focal length selection. Press the k button to switch
the On [w]/Off setting, then press the multi selector K
to apply the selection.
Startup zoom
position 2
When the camera is turned on, the zoom position moves
to the focal length (equivalent to 35mm [135] format of
angle of view) of the zoom lens that is set in advance. The
default setting is 24 mm.
Shooting Features
Description
Higher ISO sensitivity allows you to take pictures of darker
subjects. Additionally, even with subjects of similar
brightness, pictures can be taken at faster shutter speeds,
and blurring caused by camera shake and subject
movement can be reduced. When ISO sensitivity is set to
Auto (default setting), the camera sets the ISO sensitivity
automatically.
• In m (Manual) mode, ISO sensitivity is fixed at ISO 80 if
Auto or Fixed range auto is selected.
Option
E47
69
Features That Can Be Set Using the d (Menu) Button (Shooting Mode)
1
If this function is assigned to the w (function) button using Fn button, its setting menu
can be also displayed on the screen by pressing the w (function) button during shooting.
See A71 for more information on using the Fn (function) button.
2 This function cannot be set when using M mode.
Shooting Features
70
Functions That Can Be Set Using the Fn (Function)
Button
The following functions can be also set by pressing the w (function) button
instead of displaying the corresponding menu by pressing the d button.
• This feature can be used when the shooting mode is j, k, l, m or M.
Image quality (A72)
Image size (A73)
Picture Control (A68)
White balance (A68)
Metering (A68)
Continuous (A68)
ISO sensitivity (A69)
AF area mode (A69)
Vibration reduction (A104)
1 Press the w (function) button when the shooting screen is displayed.
Shooting Features
• The U Fn button function menu and the setting items of the function (default
setting is Continuous) that was last assigned to the w (function) button are
displayed.
Single
2 Use the multi selector to select the menu
item.
• To assign another function, select the U Fn
button function menu and press the k button.
Then, select the desired function from the
displayed menu.
Apply selection
3 After you finish assigning the function, press the k button or w
(function) button.
• The camera returns to the shooting screen.
71
Changing the Image Quality and Image Size
The image quality (compression ratio) and image size can be selected for
recording.
Image Quality
With a higher image quality setting, a higher detail of image expression is retained,
but the number of images that can be saved (A74) is reduced because the file
size also becomes larger.
Display the shooting screen M d button (A10) M Shooting menu M Image quality
Option
Shooting Features
Description
Finer image quality than Normal.
a Fine
Compression ratio of about 1:4
Normal (default Normal image quality, suitable for most applications.
b setting)
Compression ratio of about 1:8
C Image Quality Setting
• The setting for image quality is shown by an icon displayed on the monitor during shooting and
playback (A12 to 14).
• The image quality can be changed by selecting Image quality and rotating the command dial
when menus are displayed.
• The setting is also applied to other shooting modes (except for shooting modes M and Easy
panorama and 3D photography in scene mode).
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A75) for more information.
C More Information
• See “Number of Exposures Remaining” (A74) for more information.
• See “File and Folder Names” (E90) for more information.
72
Changing the Image Quality and Image Size
Image Size
You can set the image size (amount of pixels) for pictures recorded.
The larger the image, the larger the size at which it can be printed or displayed
without becoming noticeably “grainy,” limiting the number of pictures that can be
recorded (A74).
Display the shooting screen M d button (A10) M Shooting menu M Image size
Aspect ratio
(horizontal: vertical)
Print size2
(cm/in.)
(approx.)
r
4896×3672
(default setting)
4:3
41 × 31/16 × 12
E
3264×2448
4:3
28 × 21/11 × 8
L
2272×1704
4:3
19 × 14/7.5 × 5.6
B
1600×1200
4:3
13 × 10/5.3 × 4
f
640×480
4:3
5 × 4/2 × 1.5
s
4864×2736
16:9
41 × 23/16 × 9
O
1920×1080
16:9
16 × 9/6 × 3.5
I
4896×3264
3:2
41 × 28/16 × 11
H
3672×3672
1:1
31 × 31/12 × 12
Shooting Features
Option1
1
The total number of pixels captured and the number of pixels captured horizontally and
vertically.
Example: r 4896×3672 = Approx. 18 megapixels, 4896 × 3672 pixels
2 The print size at an output resolution of 300 dpi.
Print sizes are calculated by dividing the number of pixels by the printer resolution (dpi)
and multiplying by 2.54 cm (1 in.). However, even with the same image size setting, images
printed at higher resolutions print smaller than the size indicated, and those printed at
lower resolutions print larger than the size indicated.
C Image Size Setting
• The setting for the image size is shown by an icon displayed on the monitor during shooting and
playback (A12 to 14).
• The image size can be changed by selecting Image size and rotating the command dial when
menus are displayed.
• The setting is also applied to other shooting modes (except for shooting modes M and Easy
panorama and 3D photography in scene mode).
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A75) for more information.
73
Changing the Image Quality and Image Size
Number of Exposures Remaining
The following table lists the approximate number of images that can be saved on
a 4 GB memory card. Note that due to JPEG compression, there is a significant
difference in the number of images that can be actually saved depending on the
composition of the image, even when the memory cards have the same capacity
and the image quality and size settings are the same.
In addition, the number of images that can be saved may differ depending on the
make of the memory card.
Image size
Image quality
Number of exposures remaining
(4 GB)
Shooting Features
r
4896×3672
Fine
Normal
420
740
E
3264×2448
Fine
Normal
930
1650
L
2272×1704
Fine
Normal
1880
3350
B
1600×1200
Fine
Normal
3650
6350
f
640×480
Fine
Normal
20,100
30,100
s
4864×2736
Fine
Normal
560
1000
O
1920×1080
Fine
Normal
3440
6030
I
4896×3264
Fine
Normal
470
840
H
3672×3672
Fine
Normal
550
990
• If the number of exposures remaining is 10,000 or more, “9999” is displayed.
• After removing the memory card, check the indicator showing the number of
exposures that can be stored in the internal memory (approx. 15 MB) on the
screen during shooting.
C Printing Images of Size 1:1
Change the printer setting to “Border” when printing images with the size set to 1:1.
The images may not be printed in 1:1 ratio depending on the printer.
See the instruction manual of the printer or check with the authorized print dealer for further details.
74
Features Not Available in Combination
Some features cannot be used in combination with other menu settings.
Restricted function
Flash mode
Self-timer/Smile
timer
Image quality
Image size
ISO sensitivity
Description
When B (infinity) is selected, the flash is not
available.
Continuous
(A68)
When Continuous H, Continuous L, Preshooting cache, Continuous H: 120 fps,
Continuous H: 60 fps, BSS or Multi-shot 16 is
selected, the flash is not available.
Exposure
bracketing
(A69)
The flash is not available.
AF area mode
(A69)
When Subject tracking is selected, the self-timer/
smile timer are not available.
Smile timer
(A60)
When smile timer is selected, the focus mode is
reset to A (autofocus).
AF area mode
(A69)
When Subject tracking is selected, E (manual
focus) is not available.
Continuous
(A68)
When Pre-shooting cache or Multi-shot 16 is
selected, Image quality is fixed at Normal.
Continuous
(A68)
• When Pre-shooting cache is selected, Image
size is fixed at C (2048×1536 pixels).
• When Continuous H: 120 fps is selected,
Image size is fixed at f (640 × 480 pixels) and
when Continuous H: 60 fps is selected, Image
size is fixed at O (1920 × 1080 pixels).
• When Multi-shot 16 is selected, Image size is
fixed at D (2560 × 1920 pixels).
Continuous
(A68)
When Pre-shooting cache, Continuous H: 120
fps, Continuous H: 60 fps or Multi-shot 16 is
selected, ISO sensitivity is fixed at Auto.
Shooting Features
Focus mode
Setting
Focus mode
(A62)
• When ISO sensitivity is set to Auto and Active
D-Lighting is set to any mode other than Off,
the maximum value for ISO sensitivity is set to
Active D-Lighting
ISO 800.
(A69)
• When Active D-Lighting is set to any mode
other than Off, 1600, 3200 or Hi 1 in ISO
sensitivity is not available.
White balance
Picture Control
(A68)
When Monochrome is selected for shooting,
White balance is fixed at Auto (normal).
Picture Control
Active D-Lighting When using Active D-Lighting, Contrast in
(A69)
manual adjustment cannot be adjusted.
75
Features Not Available in Combination
Restricted function
Metering
Continuous/
Exposure
bracketing
Shooting Features
AF area mode
76
Setting
Description
Active D-Lighting Metering is reset to Matrix when Active D(A69)
Lighting is set to any mode other than Off.
Continuous
(A68)/Exposure
bracketing
(A69)
Continuous and Exposure bracketing are not
available simultaneously.
Exposure bracketing is reset to Off when
Continuous is set to any mode other than Single.
The setting for Continuous is reset to Single
when Exposure bracketing is set to any mode
other than Off.
Self-timer (A59)
Continuous H, Continuous L, Pre-shooting
cache or BSS and self-timer are not available
simultaneously. When self-timer is set, a single
picture is shot.
Smile timer
(A60)
When the camera detects smiling faces and the
shutter is released, only one picture is shot. When
Pre-shooting cache is selected, the continuous
shooting operates in Single mode. If interval timer
shooting is set, shooting finishes automatically
after one picture is shot.
Picture Control
(A68)
Exposure bracketing cannot be used when
Monochrome is selected.
Smile timer
(A60)
The camera takes a picture using face detection
regardless of the applied AF area mode option.
Focus mode
(A62)
• When a setting other than Subject tracking is
selected and B (infinity) is selected as the focus
mode for shooting, the camera focuses at infinity
regardless of the applied AF area mode option.
• When set to E (manual focus), the AF area
mode cannot be set.
Picture Control
(A68)
When Target finding AF is selected and Picture
Control is set to Monochrome, the camera
focuses on a face or selects the focus areas
containing the subject closest to the camera out of
9 focus areas.
White balance
(A68)
When Target finding AF is selected and White
balance is set to Preset manual, Incandescent,
Fluorescent or fine adjustment of white balance
has been performed, the camera focuses on a face
or selects the focus areas containing the subject
closest to the camera out of 9 focus areas.
Features Not Available in Combination
Restricted function
Setting
Smile timer
(A60)
Autofocus mode Focus mode
(A62)
Description
Autofocus mode option cannot be changed when
smile timer is selected.
When the focus mode is set to B (infinity), the
autofocus mode operates using the Single AF
setting.
When Face priority is selected for AF area mode,
Single AF is automatically selected.
Active DLighting
ISO sensitivity
(A69)
When ISO sensitivity is set to 1600, 3200 or Hi 1,
Active D-Lighting is not available.
Print date
Continuous
(A68)
When Pre-shooting cache, Continuous H: 120
fps or Continuous H: 60 fps is selected, print date
is not available.
Continuous
(A68)
Shutter sound is disabled when Continuous H,
Continuous L, Pre-shooting cache, Continuous
H: 120 fps, Continuous H: 60 fps, BSS or Multishot 16 is selected.
Sound settings
Blink warning
Digital zoom
Exposure
bracketing
(A69)
Shutter sound is disabled.
Smile timer
(A60)/
Continuous
(A68)/Exposure
bracketing
(A69)
Blink warning does not take effect when using the
smile timer, Continuous is set to a setting other
than Single or exposure bracketing is set.
Smile timer
(A60)
The digital zoom cannot be used when smile timer
is selected.
Focus mode
(A62)
The digital zoom cannot be used when E
(manual focus) is selected.
Continuous
(A68)
The digital zoom cannot be used when Multi-shot
16 is selected.
AF area mode
(A69)
The digital zoom cannot be used when Subject
tracking is selected.
Zoom memory
(A69)
The digital zoom cannot be used when Zoom
memory is set to On.
Shooting Features
AF area mode
(A69)
B Notes on Digital Zoom
• The digital zoom cannot be used with certain shooting modes.
• When the digital zoom is in effect, selectable options for AF area mode or metering mode are
restricted (E71).
77
Features Not Available in Combination
The Control Range of the Shutter Speed (j, k, l, m Modes)
The control range of the shutter speed differs depending on the zoom position,
aperture value or the ISO sensitivity setting. Additionally, the control range
changes in the following continuous shooting settings.
Setting
ISO sensitivity (A69)1
Shooting Features
Continuous (A68)
1
2
3
78
Control range
Auto2,
Fixed range auto2
1/40003 to 1 s (j, k, l mode)
1/40003 to 8 s (m mode)
ISO 80, 100
1/40003 to 8 s
ISO 200, 400
1/40003 to 4 s
ISO 800
1/40003 to 2 s
ISO 1600
1/40003 to 1 s
ISO 3200, Hi 1
1/40003 to 1/2 s
Continuous H,
Continuous L, BSS
1/40003 to 1/30 s
Pre-shooting cache,
Multi-shot 16
1/4000 to 1/30 s
Continuous H: 120 fps
1/4000 to 1/125 s
Continuous H: 60 fps
1/4000 to 1/60 s
Intvl timer shooting
1/40003 to 1 s (up to 1/2 s when ISO
sensitivity is set to ISO 3200 or Hi 1)
The ISO sensitivity setting is restricted depending on the continuous shooting setting (A75).
In m mode, the ISO sensitivity is fixed at ISO 80.
When the aperture value is set between f/6.6 and f/8.3 and the lens is at its maximum wideangle zoom position, the maximum shutter speed will be 1/4000 second. The shutter
speed becomes slower when the lens is at the telephoto zoom position and the aperture
opening is bigger. When the aperture value is set to f/8.3 (largest aperture) and the lens is
at its maximum telephoto zoom position, the maximum shutter speed will be 1/2500
second.
Focusing on Subject
The focus area or focus range for adjusting focus varies depending on the
shooting mode and focus mode (A62).
• In j, k, l, m, M or special effects mode, focus area can be set by selecting AF
area mode (A69) in the shooting menu.
Using the Target Finding AF
Focus area
• The camera has 9 focus areas, and if it does not
detect the main subject, it automatically selects the
focus areas containing the subject closest to the
camera. When the subject is in focus, the focus areas
that are in focus light in green.
1/250
Shooting Features
When AF area mode in j, k, l, m or M mode is set to Target finding AF, the
camera will adjust the focus during the following operations if you press the
shutter-release button halfway.
• When the camera detects the main subject, it
focuses on that subject. When the subject is in focus,
the focus areas that match up with the size of the
subject will light in green (multiple areas may light
up).
When detecting a human face, the camera focuses
1/250 F5.6
on it as a priority.
F5.6
Focus area
B Notes on Target Finding AF
• Depending on shooting conditions, the subject that the camera determines to be the main
subject may vary.
• The camera may not detect the main subject appropriately in the following situations:
- When the subject is very dark or bright
- When the main subject lacks clearly defined colors
- When the shot is framed so that the main subject is on the edge of the monitor
- When the main subject is composed of a repeating pattern
• In the following situations, the camera focuses on a face or selects the focus areas containing the
subject closest to the camera out of 9 focus areas:
- When Picture Control is set to Monochrome
- When White balance is set to Preset manual, Incandescent, Fluorescent, or when fine
adjustment of white balance has been performed
79
Focusing on Subject
Using Face Detection
In the following settings, the camera uses face
detection to automatically focus on human faces. If the
camera detects more than one face, a double border is
displayed around the face that the camera will focus
on, and single borders are displayed around the other
faces.
Setting
Shooting Features
Face priority is selected for AF
area mode (A69) in j, k, l,
m or M mode.
Scene auto selector, Portrait,
Night portrait, Pet portrait*
scene modes (A36)
Number of faces that
can be detected
25m 0s
1/250
F5.6
840
Focus area (double border)
Up to 12 The face closest to the camera
The face closest to the center of
the frame
* If Pet portrait auto release is switched to OFF when Pet portrait is selected, the camera
will detect human faces (A44).
a (Smile timer) (A60)
Up to 3
• When using Face priority, if the shutter-release button is pressed halfway while no faces are
detected or while framing a shot with no faces in it, the camera automatically selects the focus
areas (up to 9) that contain the subject closest to the camera.
• When Scene auto selector is selected, the focus area changes depending on which scene the
camera selects.
• When using Portrait or Night portrait, if no faces are detected when the shutter-release button
is pressed halfway, the camera will focus on the subject at the center of the frame.
• When a (smile timer) is selected, if you press the shutter-release button halfway while no faces
are detected, the camera will focus on the subject at the center of the frame.
B Notes on Face Detection
• The camera’s ability to detect faces depends on a variety of factors, including whether or not the
subject is facing the camera. Additionally, the camera may be unable to detect faces in the
following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
• When the frame includes more than one face, the faces detected by the camera and the face on
which the camera focuses depend upon a variety of factors, including the direction in which the
subject is facing.
• In some rare cases, such as those described in “Autofocus” (A81), the subject may not be in focus
even though the double border turns green. If the camera does not focus, try “Focus Lock” (A81).
C Viewing Pictures Taken Using Face Detection
• During playback, the camera automatically rotates images according to the orientation of the
faces that were detected at the time of shooting (except for pictures taken using Continuous
(A68) or Exposure bracketing (A69)).
• When zooming in on an image displayed in full-frame playback mode by rotating the zoom
control toward g (i), the image is enlarged at the center of the face that was detected during
shooting (A82).
80
Focusing on Subject
Focus Lock
Use focus lock to focus on off-center subjects when center is selected for AF area
mode.
• Be sure that the distance between the camera and the subject does not change.
• When the shutter-release button is pressed halfway, the exposure is locked.
25m 0s
1/250
F5.6
840
Frame the
subject to be
focused on
using the
camera.
1/250
Press the
shutterrelease button
halfway.
F5.6
Confirm that
the focus area
lights in green.
1/250
F5.6
Press the
shutterrelease
button all
the way to
shoot.
Autofocus
Autofocus may not perform as expected in the following situations. In some rare
cases, the subject may not be in focus despite the fact that the focus area or focus
indicator lights in green.
• Subject is very dark
• Objects of sharply differing brightness are included in the scene (e.g., the sun
behind the subject makes that subject appear very dark)
• No contrast between the subject and surroundings (e.g., a portrait subject,
wearing a white shirt, is standing in front of a white wall)
• Several objects are at different distances from the camera (e.g., an animal inside
a cage)
• Subjects with repeating patterns (window blinds, buildings with multiple rows
of similarly shaped windows, etc.)
• Subject is moving rapidly
In these situations, try pressing the shutter-release button halfway to refocus
several times, or focus on another subject and use focus lock. When using focus
lock, be sure that the distance between the camera and the subject with which
focus was locked is the same as that for the actual subject.
The camera can also focus using manual focus (A62, E2).
Shooting Features
Continue holding
down the
shutter-release
button halfway
and recompose
the picture.
81
Playback Features
Playback Zoom
Select an image to be enlarged in playback mode and rotate
the zoom control toward g (i).
g
(i)
15/05/2013 15:30
0004.JPG
f
(h)
4/ 132
Image is displayed in fullframe playback mode.
Image is zoomed in.
Display
position
guide
Playback Features
Operations During Playback Zoom
Function
Adjusting the
magnification
Operation
f(h)/ g(i)
Moving the display
position
Description
• The zoom increases up to 10×.
• The zoom can also be adjusted by
rotating the command dial.
Move the display position.
Cropping
d
Crop only the displayed area of the image
and save as a separate file (E16).
Returning to full-frame
playback mode
k
Return to full-frame playback mode.
C Enlarging Images Recorded with Face Detection or Pet Detection
Pictures taken using face detection (A80) or pet detection (A44) are enlarged at the center of the
face that was detected during shooting (excepting images recorded by Continuous (A68) or
Exposure bracketing (A69)). If the camera detected multiple faces, use H, I, J, and K to
display a different face. Change the zoom ratio and press H, I, J or K to zoom in on an area of the
image where there are no faces.
82
Viewing Several Images (Thumbnail Playback and
Calendar Display)
Rotate the zoom control toward f (h) in playback mode.
This function will display several images at the same time,
making it easy to find the desired image.
f
(h)
15/05/2013 15:30
0004.JPG
1/ 132
Full-frame playback
mode
1 / 132
g
(i)
f
(h)
g
(i)
Image thumbnail display
(4, 9, 16 and 72 images per screen)
2013 5
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
3
Calendar display
Function
Changing the
number of images
displayed
Operation
Description
f(h)/ g(i)
• Change the number of images to be displayed
(4, 9, 16 and 72 images per screen).
• When 72 images are displayed, rotate the
zoom control toward f (h) to switch to
calendar display.
• When calendar is displayed, rotate the zoom
control toward g (i) to switch to 72-image
display.
Selecting an image
or date
• In thumbnail display mode, select an image.
• In calendar display mode, select a date.
Returning to fullframe playback
mode
• In thumbnail display mode, the selected image
is displayed in full-frame playback mode.
• In calendar display mode, the first image
captured on the selected date is displayed in
full-frame playback mode.
k
Playback Features
Operations During Thumbnail Playback and Calendar Display
B Note on Calendar Display
Pictures taken when the camera's date is not set are treated as images captured on “January 1, 2013.“
83
Features That Can Be Set Using the d (Menu)
Button (Playback Mode)
When viewing images in full-frame playback mode or thumbnail playback mode,
press the d button to set the playback menu (A10).
Playback menu
Quick retouch
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
15/05/2013 15:30
0004.JPG
1/ 132
Available Playback Menus
Option
Playback Features
84
Description
A
k Quick retouch1, 2, 3
Create retouched copies in which contrast and
saturation have been enhanced.
E12
I D-Lighting1, 3
Create copies with enhanced brightness and contrast,
brightening dark portions of an image.
E12
e Skin softening1, 2, 3
When this feature is enabled, the camera detects faces
in pictures taken and creates a copy with softer facial
skin tones.
E13
p Filter effects1, 3
Apply a variety of effects using digital filter. The
available effects are Soft, Selective color, Cross
screen, Fisheye, Miniature effect, Painting and
Vignette.
E14
a Print order4, 5
When using a printer to print images saved on the
memory card, the print order function can be used to
select which images are printed, and how many copies
of each image are printed.
E52
b Slide show
Images saved in the internal memory or on a memory
card are played back in an automatic slide show.
E54
d Protect5
Protect selected images and movies from accidental
deletion.
E55
f Rotate image3, 4, 5
Specify the orientation in which saved images are
displayed in playback mode.
E55
g Small picture1, 3
Create a small copy of the picture taken. This feature is
useful for creating copies for display on Web pages or
e­mail attachments.
E15
Features That Can Be Set Using the d (Menu) Button (Playback Mode)
Description
A
E Voice memo3
Use the camera’s microphone to record voice memos
and attach them to pictures taken. Playback and
deletion of voice memos can also be performed.
E56
h Copy5
Copy images between the internal memory and a
memory card. This function can also be used to copy
movies.
E57
C Sequence display
options
Display a sequence of images shot continuously as
individual images, or display only the key picture of a
sequence.
E58
x Choose key picture5
Change the key picture for the series of pictures that
were shot continuously (pictures in a sequence, E8).
• When changing this setting, select the desired
sequence before displaying the menu.
E58
Option
1
Playback Features
This function is used to edit the currently selected image and save it as a separate file from
the original file.
Note, however, that the following pictures cannot be edited.
• Pictures with 16:9, 3:2 or 1:1 aspect ratio
• Pictures taken using Easy panorama or 3D photography
Note also that there is a restriction on retouching edited images (E11).
2 Pictures that were extracted from a movie cannot be edited using the quick retouch or skin
softening function.
3 This function cannot be used for pictures in the sequence when only the key picture is
displayed. To use this function, press the k button to display individual images before
displaying the menu.
4 The function cannot be applied to pictures taken using 3D photography.
5 Select an image in the image selection screen. See “Using the Screen for Selecting Images“
(A86) for more information.
See “Editing Still Images” (E10) and “The Playback Menu” (E52) in the
Reference Section for more information about each function.
85
Features That Can Be Set Using the d (Menu) Button (Playback Mode)
Using the Screen for Selecting Images
The image selection screen is displayed in the following menus.
Only one image can be selected for some menu items, while for other menu items,
multiple images can be selected.
Functions for which only one image can be Functions for which multiple images can be
selected
selected
• Playback menu:
Rotate image (E55),
Choose key picture (E58)
• Setup menu:
Select an image in Welcome screen
(E64)
• PictBridge (A printer is connected) :
Print selection (E20)
• Playback menu:
Select images in Print order (E52),
Protect (E55),
Selected images in Copy (E57)
• PictBridge (A printer is connected) :
Print selection in Print menu (E21)
• Erase selected images in Delete (A33)
Follow the procedure described below to select images.
1 Rotate the multi selector, or press J or K to
Erase selected images
Playback Features
choose the desired image.
• Rotate the zoom control toward g (i) to switch to fullframe playback mode, or f (h) to switch to 12thumbnail display.
• For functions for which only one image can be selected,
proceed to step 3.
2 Press H or I to select ON or OFF (or the
number of copies).
Back
ON/OFF
Erase selected images
• When ON is selected, a check mark (y) is displayed
with the image. Repeat steps 1 and 2 to select
additional images.
Back
ON/OFF
3 Press the k button to apply the image selection.
• With selections such as Erase selected images, the confirmation dialog is displayed.
Follow the instructions on the screen.
86
Connecting the Camera to a TV, Computer, or Printer
You can enhance your enjoyment of images and movies by connecting the
camera to a TV, computer, or printer.
• Before connecting the camera to an external device, make sure the remaining
battery level is sufficient and turn the camera off. For information about the
connection methods and subsequent operations, refer to the documentation
included with the device in addition to this document.
USB/Audio video connector
HDMI mini connector (Type C)
How to open the
connector cover
Insert the plug straight.
Viewing images on a TV
E17
Viewing and organizing images on a computer
A88
If you transfer images to a computer, you can perform simple
retouching and manage image data in addition to playing back images
and movies.
Connection method: Connect the camera to the computer’s USB input
jack with the included USB cable.
• Before connecting to a computer, install ViewNX 2 on the computer
using the included ViewNX 2 CD-ROM. See A90 for more
information about using the included ViewNX 2 CD-ROM. and
transferring images to a computer.
• If any USB devices that draw the power from the computer are
connected, disconnect them from the computer before you connect
the camera to it. Connecting the camera and other USB-powered
devices to the same computer simultaneously may cause a camera
malfunction or excessive power supply from the computer, which
could damage the camera or memory card.
Printing images without using a computer
Playback Features
You can view the camera’s images and movies on a TV.
Connection method: Connect the video and audio plugs of the included
Audio Video Cable EG-CP16 to the TV’s input jacks. Alternatively,
connect a commercially available HDMI cable (Type C) to the TV’s HDMI
input jack.
E19
If you connect the camera to a PictBridge-compatible printer, you can
print images without using a computer.
Connection method: Connect the camera directly to the printer’s USB
input jack with the included USB cable.
87
Using ViewNX 2
ViewNX 2 is an all-in-one software package which enables you to transfer, view,
edit and share images.
Install ViewNX 2 using the included ViewNX 2 CD-ROM.
Your Imaging Toolbox
ViewNX 2™
Installing ViewNX 2
Playback Features
• An Internet connection is required.
Compatible Operating Systems
Windows
Windows 8, Windows 7, Windows Vista, Windows XP
Macintosh
Mac OS X 10.6, 10.7, 10.8
Refer to the Nikon website for details on system requirements, including the latest
information on operating system compatibility.
1 Start the computer and insert the ViewNX 2 CD-ROM into the CD-ROM
drive.
• Windows: If instructions for operating the CD-ROM are displayed in the window,
follow the instructions to proceed to the installation window.
• Mac OS: When the ViewNX 2 window is displayed, double-click the Welcome icon.
88
Using ViewNX 2
2 Select a language in the language selection dialog to open the
installation window.
• If the desired language is not available, click Region Selection to choose a different
region and then choose the desired language (the Region Selection button is not
available in the European release).
• Click Next to display the installation window.
3 Start the installer.
• We recommend clicking Installation Guide in the installation window to check the
installation help information and system requirements before installing ViewNX 2.
• Click Typical Installation (Recommended) in the installation window.
• When the Software Download screen is displayed, click I agree - Begin download.
• Follow the on-screen instructions to install the software.
5 Exit the installer when the installation completion screen is displayed.
Playback Features
4 Download the software.
• Windows: Click Yes.
• Mac OS: Click OK.
The following software is installed:
• ViewNX 2 (consisting of the three modules below)
- Nikon Transfer 2: For transferring images to the computer
- ViewNX 2: For viewing, editing, and printing transferred images
- Nikon Movie Editor: For basic editing of transferred movies
• Panorama Maker (for creating a single panorama photo using a series of images shot
in panorama assist scene mode)
6 Remove the ViewNX 2 CD-ROM from the CD-ROM drive.
89
Using ViewNX 2
Transferring Images to the Computer
1 Choose how images will be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the included USB
cable. The camera automatically turns on.
To transfer images that are saved in the camera’s internal memory, remove the
memory card from the camera before connecting it to the computer.
Playback Features
• SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
• SD card reader: Connect a card reader (available separately from third-party
suppliers) to the computer and insert the memory card.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
• When using Windows 7
If the dialog shown at right is displayed,
follow the steps below to select Nikon
Transfer 2.
1 Under Import pictures and videos,
click Change program. A program
selection dialog will be displayed; select
Import File using Nikon Transfer 2
and click OK.
2 Double-click Import File.
P520
P520
P520
If the memory card contains a large number of images, it may take a while for Nikon
Transfer 2 to start. Wait until Nikon Transfer 2 starts.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.
90
Using ViewNX 2
2 Transfer images to the computer.
• Confirm that the name of the connected camera or removable disk is displayed as the
“Source” on the “Options” title bar of Nikon Transfer 2 (1).
• Click Start Transfer (2).
1
P520
2
• At default settings, all the images on the memory card will be copied to the
computer.
3 Terminate the connection.
Viewing Images
Playback Features
• If the camera is connected to the computer, turn the camera off and disconnect the
USB cable.
• If you are using a card reader or card slot, choose the appropriate option in the
computer operating system to eject the removable disk corresponding to the
memory card and then remove the card from the card reader or card slot.
Start ViewNX 2.
• Images are displayed in ViewNX 2 when
transfer is complete.
• Consult online help for more information on
using ViewNX 2.
C Starting ViewNX 2 Manually
• Windows: Double-click the ViewNX 2 shortcut on the desktop.
• Mac OS: Click the ViewNX 2 icon in the Dock.
91
Recording and Playing Back Movies
Recording Movies
You can record movies by simply pressing the b (e movie-record) button.
Color tones, white balance, and other settings are the same as they are when
taking still images.
• Only a short movie can be recorded in the internal memory. To record a movie,
use a memory card (Class 6 or higher is recommended).
1 Turn on the camera and display the shooting
Movie option
screen.
• The movie options icon indicates the type of movie
recorded (A96).
25m 0s
1/250
* The maximum movie length shown in the
illustration differs from the actual value.
F5.6
840
Maximum movie length*
2 Press the b (e movie-record) button
to start movie recording.
Recording and Playing Back Movies
• The camera focuses on the subject at the
center of the frame. Focus areas are not
displayed during recording.
• See “Focus and Exposure During Movie
Recording” (A 93) for more information.
• See “Pausing Movie Recording” (A 93) for more information.
• When movies are recorded by setting d 1080P/
30p for Movie options (i.e., pictures with 16:9 aspect
ratio), the aspect ratio of shooting screen will switch to
16:9 (the movies are recorded in the area shown in the
right side screen). Press the s (display) button and
display the movie frame (A9) to check the range of a
movie in a frame before recording.
7m23s
• The approximate remaining movie length is displayed on the monitor screen. When a
memory card is not inserted, C is displayed and movie is saved to the internal
memory.
• Recording stops automatically when the maximum movie length has been recorded.
3 Press the b (e movie-record) button again to end recording.
92
Recording Movies
Focus and Exposure During Movie Recording
• The focus can be adjusted during movie recording in the following manner in
accordance with the Autofocus mode (A96) setting of the movie menu.
- A Single AF (default setting): The focus is locked when the b (e movierecord) button is pressed to start movie recording. To adjust the focus using
the autofocus again while recording movies, press the multi selector J.
- B Full-time AF: The focus is adjusted repeatedly even during movie
recording.
• When the focus mode (A62) is E (manual focus), adjust the focus manually.
The focus can be adjusted during movie recording by rotating the multi
selector clockwise to focus on near subjects or counterclockwise to focus on far
subjects.
• Autofocus may not perform as expected (A81). Should this occur, try E
(manual focus) (A62, E2) or set Autofocus mode in the movie menu to
A Single AF (default setting) and then use focus lock (A81) to record.
• When the multi selector K is pressed during movie recording, the exposure is
locked. To unlock, press K again.
Pausing Movie Recording
B Notes on Using Zoom During Movie Recording
• The zoom indicator is not displayed during movie recording.
• When the digital zoom is used, the image quality will deteriorate.
• If you start recording a movie without using digital zoom, and you keep rotating the zoom control
toward g (i), the zoom stops at the maximum optical zoom ratio. Remove your finger from the
zoom control and then rotate it again toward g (i) to activate digital zoom. When movie
recording ends, digital zoom is cancelled.
Recording and Playing Back Movies
When the k button is pressed during movie recording, recording is paused
(except when using p iFrame 540/30p, p iFrame 540/25p or HS movies).
To resume recording, press the k button again. If recording remains paused for
more than 5 minutes or the b (e movie-record) button is pressed, recording
ends.
93
Recording Movies
B Note on Recording Images and Saving Movies
The indicator showing the number of exposures remaining or the indicator showing the maximum
movie length flashes while images are being recorded or while a movie is being saved. Do not open
the battery-chamber/memory card slot cover or remove the battery or memory card while an
indicator is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.
B Notes on Movie Recording
• When saving a movie onto a memory card, a memory card with an SD speed class of Class 6 or
higher is recommended (A21). If the transfer speed of the card is slow, the movie recording may
end unexpectedly.
• The sounds of zoom control operation, zoom, autofocus, vibration reduction or aperture control
when the brightness changes may be recorded.
• The following phenomena may be seen on the monitor screen while recording movies. These
phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor lighting
- Subjects that move quickly from one side of the frame to the other, such as a moving train or car,
may appear skewed
- The entire movie image may be skewed when the camera is panned
- Lighting or other bright areas may leave residual images when the camera is moved
B Notes on the Camera Temperature
Recording and Playing Back Movies
• The camera may become warm when recording movies for an extended period of time or when
the camera is used in a hot area.
• When the temperature inside the camera becomes extremely
high during movie recording, the camera may automatically stop
recording to prevent internal damage to the camera. A 10-second
countdown indicator (B10s) appears on the monitor, and then
the camera automatically stops recording and turns off when the
message “The camera will turn off to prevent overheating.”
is displayed.
7m23s
Leave the camera off until the inside of the camera has cooled
and then use it.
C Functions Available in Movie Recording
• The exposure compensation and White balance settings in shooting menu (A67) are also
applied with movie recording.
• When focus mode is set to p (macro close-up), the camera can zoom to a position closer to the
subject to record movies. Confirm settings before starting movie recording.
• The self-timer (A59) can be used. If the self-timer is set and the b (e movie-record) button is
pressed, the camera starts movie recording after 10 or 2 seconds.
• The flash does not fire.
• Press the d button before starting to record the movie to display the D (movie) tab and select
movie menu settings (A96).
94
Recording Movies
C Recording HS (High Speed) Movies
When Movie options (A96) of the movie menu is set to h/u HS 480/4×, i/w HS
720/2× or j/x HS 1080/0.5×, movies that can be played back in slow motion or fast
motion can be recorded.
C More Information
• See “Maximum Movie Length” (E50) for more information.
• See “File and Folder Names” (E90) for more information.
Saving Still Pictures While Recording Movies
If the shutter-release button is pressed all the way while
recording a movie, one frame is saved as a still picture.
Movie recording continues while the still picture is
being saved.
• The maximum number of still pictures that can be
7m23s
saved during a movie recording (10 pictures) and Q
are displayed at the top left of the monitor. When f
is displayed, a still picture cannot be saved.
• The image size of the still pictures to be saved is set to i (1920 × 1080).
B Notes on Saving Still Pictures During Movie Recording
Recording and Playing Back Movies
• Still pictures cannot be saved during movie recording in the following situations.
- When movie recording is paused
- When a movie is recorded in the internal memory
- When the remaining movie length is less than 10 seconds
- When Movie options (A96) is set to n 1080/60i, q 1080/50i, g 480/30p, s
480/25p or HS movie
• Frames of a movie that were recorded when a still picture was being taken may not be played
back in a seamless manner.
• The sounds of operating the shutter-release button when saving a still picture may be heard in the
recorded movie.
• If the camera moves when the shutter-release button is pressed, the picture may be blurred.
95
Features That Can Be Set Using the d (Menu) Button
(Movie Menu)
Display the shooting screen M d button M e tab (A10)
Press the d button on the shooting screen to display
the menu screen and select the D tab to change the
following settings on the movie menu.
Movie
Movie options
Autofocus mode
Available Movie Menus
Description
A
Movie options
Select the type of movie to be recorded.
The camera can record normal speed movies and HS (high
speed) movies, which can be played back in slow motion or
fast motion.
The default setting is d 1080P/30p or o 1080P/
25p.
E48
Autofocus mode
Select how the camera focuses when recording normal
speed movies.
Single AF (default setting) where the focus is locked when
movie recording begins, or Full-time AF where the camera
focuses continuously during movie recording can be
selected.
When Full-time AF is selected, the sound of the camera
focusing may be heard in recorded movies. If you want to
prevent the sound of the camera focusing from being
recorded, select Single AF.
E51
Option
Recording and Playing Back Movies
96
C More Information
See “Basic Menu Operations“ (A10) for more information.
Playing Back Movies
1 Press the c (playback) button to select playback
15/05/2013 15:30
0004.MOV
mode.
• Use the multi selector to select a movie.
• Movies can be recognized by the movie options icon
(E50).
22m16s
2 Press the k button to play back a movie.
Pausing
Operations Available During Movie Playback
Rotate the multi selector to fast forward or rewind.
Playback controls appear at the top of the monitor.
Press the multi selector J or K to select an icon of
playback control, then press the k button to perform
the following operations.
7m42s
During
playback
Volume
indicator
Use
A
Rewind the movie while the k button is pressed down.
Advance
B
Advance the movie while the k button is pressed down.
Pause
E
End
G
Description
The following operations can be performed with the playback
controls at the top of the monitor while playback is paused.
Rewind the movie by one frame. Hold down the k
C button to rewind continuously.*
D Advance the movie by one frame. Hold down the k
button to advance continuously.*
Extract and save only the required parts of the movie
I
(E24).
Save the extracted frame from a movie as a still picture
H
(E25).
F
Recording and Playing Back Movies
To
Rewind
Resume playback.
Return to full-frame playback mode.
* The movie can also be advanced or rewound by one frame by rotating the multi selector.
To delete a movie, use full-frame playback mode (A32) or thumbnail playback
mode (A83) to select a movie and press the l button (A33).
Adjusting the Volume
Operate the zoom control g/f (A1) during playback.
97
Using GPS
Starting GPS Data Recording
The camera’s internal GPS receives signals from the GPS satellites and identifies its
current time and position.
The position information (latitude and longitude) can be recorded on the pictures
to be shot.
Turn the GPS Functions On
Press the d button M z (GPS options) tab (A11) M GPS options
Set Time zone and date (A103) correctly before using the GPS function.
1 Use the multi selector to select Record GPS
data, and then press the k button.
2 Select On and press the k button.
• Signals are received from the GPS satellites and
positioning starts.
• The default setting is Off.
GPS options
Record GPS data
Update A-GPS file
Record GPS data
On
Off
Using GPS
3 Press the d button.
• The camera returns to shooting screen.
• Operate in an open-air area when starting to receive signals from GPS satellites.
98
Starting GPS Data Recording
B Notes on GPS
B Battery Drain While Recording GPS Data
Using GPS
• Before using the GPS functions, read “<Important> Notes on GPS” (Axi).
• It takes a few minutes to obtain position information when positioning is performed for the first
time or in a situation where positioning cannot be performed for a long period of time, or just after
the battery is replaced.
• Positions of the GPS satellites change constantly.
You may not be able to determine the position or it may take some time depending on your
location and the time.
To use the GPS feature, use the camera in an open-air area with few obstacles in the sky.
Signal receiving will be smoother if the GPS antenna (A2) is facing the sky.
• The following locations which block or reflect signals may result in failed or inaccurate positioning.
- Inside buildings or underground locations
- Between high-rise buildings
- Under overpasses
- Inside tunnels
- Near high-voltage electrical power lines
- Between clusters of trees
• Using a mobile phone of 1.5 GHz band near this camera may disrupt positioning.
• When carrying this camera around while positioning, do not place it in a metal bag.
Positioning cannot be performed if the camera is covered with metal materials.
• When there is a significant difference in the signals from the GPS satellites, there could be a
deviation of up to several hundred meters.
• Be aware of your surroundings when positioning.
• The shooting date and time that is displayed when playing back images is determined by the
camera’s internal clock at the time of shooting.
The time obtained by the position information and recorded on images will not be displayed on
the camera.
• Position information for the first frame will be recorded on a series of pictures shot using
continuous shooting.
• When Record GPS data is set to On, GPS functions will continue to operate at the specified
interval for approximately 6 hours even after the camera is turned off. Also, GPS functions will
continue to operate while recording log data (A102) even after the camera is turned off.
• When Record GPS data is set to On, battery power drains faster than usual. Confirm the battery
level especially when the camera is recording log data.
99
Starting GPS Data Recording
C GPS Reception Indicator and Point of Interest (POI) Information
• GPS reception can be checked on the shooting screen.
GPS reception
- n: Signals are being received from four or more satellites
and positioning is being performed. Position information is
recorded on the image.
- o: Signals are being received from three satellites and
positioning is being performed. Position information is
recorded on the image.
25m 0s
- z: Signals are no longer received from the satellites. If the
1/250 F5.6
840
camera has position information that has been obtained in
the last 1 minute, this position information is recorded on
Location name information
the image.
(POI information)
- y: Signals cannot be received from the satellites, and
positioning is not possible. The position information is not
recorded on the image.
• POI information is location name information for the nearest landmarks (facilities) and other details.
- When Display POI in Points of interest (POI) of the GPS options menu (A101) is set to On,
the nearest location name information for the current location is displayed during shooting.
- When Embed POI is set to On, location name information can be recorded on the image
during shooting.
- When images recorded with the location name information are played back, the location name
information that was recorded during shooting will be displayed if Display POI is set to On.
• “----” may be displayed for the location name information depending on the setting level in Level
of detail of Points of interest (POI). Also, certain landmark names may not be registered, or the
landmark name may be different.
C Pictures with Recorded Position Information
Using GPS
100
• The z icon is displayed during playback for images which have the position information recorded
(A14).
• Position information recorded on a picture can be checked on a map with ViewNX 2 after
transferring the image to a computer (A88).
• The actual place of shooting may differ from the GPS information recorded on the image files due
to the accuracy of the position information obtained and a difference in the geodetic system used.
Features That Can Be Set Using the d (Menu)
Button (GPS Options Menu)
Press the d button M z (GPS options) tab (A11)
When the z tab is selected on the menu screen, the
following option settings can be changed in the GPS
options menu.
GPS options menu
GPS options
Points of interest (POI)
Create log
View log
Synchronize
Options Available in the GPS Options Menu
A
Record GPS data: When set to On, signals are being
received from the GPS satellites and positioning starts
(A98). The default setting is Off.
Update A-GPS file: A memory card is used to update
the A-GPS (assist GPS) file. Using the latest A-GPS file
can shorten the time needed for tracking the position
information.
• Download the latest A-GPS file from the website
below, and use it to update the file.
http://nikonimglib.com/agps2/index.html
E59
Make the settings for the POI (points of interest,
location name information).
Embed POI: When set to On, the location name
information is recorded on the pictures to be shot. The
default setting is Off.
Display POI: When set to On, the location name
information is displayed on the shooting and playback
screens. The default setting is Off.
Points of interest (POI)
Level of detail: Set the display level of the location
name information. A higher display level shows more
detailed regional information, and a lower display level
shows regional information for a wider area (such as
country names).
Edit POI: The level of the location name information
recorded on the image can be changed, and the
regional information can be deleted.
E60
GPS options
Using GPS
Description
Option
101
Features That Can Be Set Using the d (Menu) Button (GPS Options Menu)
Description
A
Create log
The measured position information is recorded at the
interval set for Log interval until a preset time set
using Start log is reached (only when Record GPS
data in GPS options of the GPS options menu is set to
On).
• Select End log and save the recorded log data to a
memory card.
E61
View log
You can check or erase the log data stored on a
memory card by selecting Create log and then
selecting End log.
• To erase log data, select a log data and press the l
button.
E63
Synchronize
Signals from the GPS satellites are used to set the date
and time of the camera's internal clock (only when
Record GPS data in GPS options of the GPS options
menu is set to On).
E63
Option
Using GPS
102
General Camera Setup
The Setup Menu
Press the d button M z (setup) tab (A11)
From the menu screen, select the z tab to display the
setup menu, and then you can change the following
settings.
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Vibration reduction
Motion detection
AF assist
A
Welcome screen
Set whether or not the welcome screen is displayed
when power is turned on. The welcome screen image
can be selected.
The default setting is None.
E64
Time zone and date
Set settings related to the camera’s date and time. The
Time zone setting allows you to specify the time zone
where the camera is mainly used and whether or not
daylight saving time is in effect. When the x travel
destination is set, the camera automatically calculates
the time difference between the travel destination and
the w home time zone, and saves images using the
date and time of the travel destination.
E65
Monitor settings
Set the image display after shooting, the screen
brightness, and whether or not to display a framing grid or
histograms on the monitor.
E67
Print date
Imprint the shooting date and time on pictures at the
time of shooting. The default setting is Off.
Dates cannot be imprinted in the following situations.
- When the scene mode is set to Easy panorama,
Panorama assist or 3D photography
- When Pre-shooting cache, Continuous H: 120
fps or Continuous H: 60 fps is selected for
Continuous (A68)
- During movie recording
E68
General Camera Setup
Description
Option
103
The Setup Menu
General Camera Setup
104
Option
Description
A
Vibration reduction
Reduce blurring caused by camera shake when
shooting. The default setting is Normal.
• If a comparatively large camera shake is likely to occur
when shooting from a car or under poor foothold
conditions, set Vibration reduction to Active.
• When using a tripod to stabilize the camera, set this
feature to Off to prevent this feature from
malfunctioning.
• If this feature is assigned to the w (function) button
using Fn button, its setting menu can be also
displayed on the screen by pressing the w
(function) button during shooting (A71).
E69
Motion detection
When the camera detects camera shake or subject
movement at the time of shooting, it automatically
increases ISO sensitivity and shutter speed to reduce
blurring. The default setting is Off.
The r indicator lights in green when the camera
detects camera shake or subject movement and
increases shutter speed.
• When using certain shooting modes or settings,
motion is not detected. In this case the r indicator is
not displayed.
E70
AF assist
When set to Auto (default setting), the AF-assist
illuminator (A30) lights if shooting in dark
surroundings to help the camera focus.
• Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area
or the scene mode that is selected.
E71
Digital zoom
When set to On (default setting), rotating and holding
the zoom control toward g (i) triggers the digital
zoom (A29) if the optical zoom is at the maximum
telephoto zoom position.
• The digital zoom cannot be used simultaneously in
certain settings such as shooting mode.
E71
Assign side zoom
control
Select the function to be performed during shooting
when the side zoom control is rotated. When set to
Zoom (default setting), the zoom control operation is
enabled.
E72
Sound settings
Turn various camera sounds on and off. In the default
setting, beep sounds are on.
• The operation sound is disabled in certain settings
such as shooting mode.
E73
Auto off
Set the amount of time that passes before the monitor
is turned off to save power. The default setting is 1 min.
E73
The Setup Menu
A
Format memory/
Format card
E74
Language
Change the camera’s display language.
E74
TV settings
Adjust settings for connection to television.
• When the camera is connected to a television using
an audio/video cable but no picture is displayed on
the television, set Video mode to NTSC or PAL
according to the type of signal compatible with the
television.
• HDMI settings can be set.
E75
Charge by computer
When set to Auto (default setting), you can charge the
camera's battery by connecting the camera to a
computer (provided that the computer is able to
supply power).
• When charging by computer, it may take more time
to charge the battery than when using the Charging
AC Adapter EH-69P.
E76
Toggle Av/Tv
selection
Switch the method for setting the flexible program,
shutter speed or aperture value.
When Do not toggle selection (default setting) is
selected, use the command dial to set the flexible
program or shutter speed and use the multi selector to
set the aperture value.
When Toggle selection is selected, use the multi
selector to set the flexible program or shutter speed
and use the command dial to set the aperture value.
• This option is enabled only when the shooting mode
is j, k, l, m or M.
E78
Reset file numbering
When Yes is selected, the sequential numbering of file
numbers is reset. After resetting, a new folder is created
and the file number for the next image taken starts
from “0001.”
E78
General Camera Setup
Description
Format the internal memory (only when a memory card
is not inserted) or the memory card (when a memory
card is inserted).
• All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to transfer important
images to a computer and save them before
formatting.
Option
105
The Setup Menu
Description
A
Blink warning
When the camera detects that a human subject may
have closed the eyes immediately after taking a picture
using face detection while shooting with modes other
than the smile timer (A80), the Did someone blink?
screen is displayed on the monitor to check the picture
taken. The default setting is Off.
E79
Eye-Fi upload
Set whether or not to enable the function for sending
images to a computer using a commercially available
Eye-Fi card. The default setting is Enable (when an EyeFi card is in the camera).
E80
Reverse indicators
Set the +/- display direction of exposure indicator to be
displayed when the shooting mode is m.
E80
Reset all
Reset the camera’s settings to their default values.
• Some of the settings such as Time zone and date
and Language and user settings that were saved for
mode dial M are not reset.
E81
Firmware version
Display the current camera firmware version.
E84
Option
General Camera Setup
106
Reference Section
The Reference Section provides detailed information and hints for using the camera.
Shooting
Taking Pictures With Manual Focus..................................................................... E2
Using Easy Panorama (Shooting and Playing back) ...................................... E3
Using Panorama Assist ............................................................................................. E6
Playback
Playing Images in a Sequence ............................................................................... E8
Editing Still Images ..................................................................................................E10
Connecting the Camera to a TV (Viewing Images on a TV).......................E17
Connecting the Camera to a Printer (Direct Print) .......................................E19
Movies
Editing Movies ...........................................................................................................E24
Menu
Shooting Menu (j, k, l or m Mode)..............................................................E26
Movie Menu................................................................................................................E48
The Playback Menu..................................................................................................E52
GPS Options Menu...................................................................................................E59
The Setup Menu........................................................................................................E64
Additional Information
Error Messages ..........................................................................................................E85
File and Folder Names ............................................................................................E90
Optional Accessories...............................................................................................E92
E1
Shooting
Taking Pictures With Manual Focus
Available when the shooting mode is j, k, l, m, M, special effects mode or
Sports scene mode.
1 Press the multi selector I (p
focus mode).
• Use the multi selector to choose E
(manual focus) and press the k button.
• W is displayed on the top of the
monitor, and the center of the picture
is enlarged.
Manual focus
2 Adjust the focus.
• Use the multi selector to adjust the focus while viewing
the image on the monitor screen.
• Rotate the multi selector to adjust the focus.
- Rotate counterclockwise: focus on far subjects
- Rotate clockwise: focus on near subjects
1/250 F5.6
840
• The focus can be adjusted in higher detail by rotating
the multi selector slowly.
• When K is pressed, first the camera is focused with autofocus, and then the manual
focus can be operated. Choose Yes and press the k button to focus on the subject at
the center of the frame with autofocus.
• Press the shutter-release button halfway to check the composition. Press the shutterrelease button all the way to take the picture.
Reference Section
3 Press the k button.
• The set focus is locked.
• Press the shutter-release button all the way to take the
picture.
• To readjust the focus, press the k button again to
display the screen in step 2.
• To change back to autofocus, return to step 1 and
choose any setting other than E.
25m 0s
1/250
F5.6
840
C E (Manual Focus)
• The digits displayed for the gauge on the right of the monitor in step 2 serve as a guideline for the
distance (m) to a subject that is in focus when the gauge indicates the center. The actual range at
which the subject can be in focus varies depending on the aperture value and zoom position. To
see whether the subject is in focus, check the subject on the monitor.
• Press the shutter-release button halfway to preview an approximate depth of field (the area in
focus behind and in front of the subject).
• Set Assign side zoom control (E72) in the setup menu to Manual focus to focus by using the
side zoom control instead of the multi selector in step 2.
• The digital zoom is not available.
E2
Using Easy Panorama (Shooting and Playing back)
Taking Pictures with Easy Panorama
Rotate the mode dial to y M d button M p Panorama
1 Select V Easy panorama and press the k
button.
2 Select the shooting range from W Normal
(180°) or X Wide (360°), and press the k
button.
Panorama
Easy panorama
Panorama assist
Easy panorama
Normal (180°)
Wide (360°)
3 Frame the first portion of the panorama
scene, and press the shutter-release button
halfway to adjust the focus.
• The zoom is fixed at the wide-angle position.
• The framing guide is displayed on the monitor.
1/250 F5.6
F3.1 1840
• The camera focuses on the subject at the center of the
frame.
• Exposure compensation (A64) can be adjusted.
• If the focus or exposure cannot be set for the main subject, try the focus lock (A81).
E3
Reference Section
• The image sizes (W × H) when the camera is held in
landscape orientation are as follows.
- W Normal (180°):
4800 × 920 when the camera is moved horizontally,
1536 × 4800 when the camera is moved vertically
- X Wide (360°):
9600 × 920 when the camera is moved horizontally,
1536 × 9600 when the camera is moved vertically
• For the image sizes when the camera is held in “tall” orientation, the combinations of
the moving direction and W × H are the opposites of the above.
• Pictures taken in this mode are saved with Normal as the image quality.
Using Easy Panorama (Shooting and Playing back)
Viewing Easy Panorama (Scroll)
Switch to playback mode (A32), display the picture
recorded with Easy panorama in full-frame playback
mode and press the k button. The camera displays the
short side of the picture filling the entire screen and
scrolls the displayed area automatically.
• W or X is displayed for pictures recorded with
Easy panorama.
15/05/2013 15:30
0004.JPG
4/ 132
• The picture is scrolled in the direction of the
panorama shooting.
• Rotate the multi selector to advance or rewind.
Playback controls are displayed at the top of the
monitor during playback. When you choose a playback
control with the multi selector J or K and press the k
button, the following operations can be performed.
To
Use
Rewind
A
Scroll quickly back while the k button is pressed. *
Description
Advance
B
Scroll quickly forward while the k button is pressed. *
The following operations can be performed with the playback
controls at the top of the monitor while playback is paused.
End
E
G
C
Rewind while the k button is pressed.*
D
Scroll while the k button is pressed.*
F
Restart the automatic scroll.
Reference Section
Pause
Return to full-frame playback mode.
* These operations can also be performed by rotating the multi selector.
B Note on Viewing Pictures Recorded with Easy Panorama
Panorama pictures recorded with functions other than Easy panorama of the COOLPIX P520 may
not be scrolled or zoomed on this camera.
E5
Using Panorama Assist
Using a tripod makes the composition easier. When using a tripod to stabilize the
camera, set Vibration reduction (E69) to Off in the setup menu.
Rotate the mode dial to y M d button M p Panorama
1 Select U Panorama assist and press the k
button.
• The I icon is displayed to show the direction in which
pictures are joined.
Panorama
Easy panorama
Panorama assist
2 Use the multi selector to choose the direction,
and press the k button.
Reference Section
• Select the direction in which pictures are joined in the
completed panorama: right (I), left (J), up (K) or
25m 0s
down (L).
• The yellow icon (II) moves to the selected direction,
840
1/250 F3.0
so press the k button to select the direction. A white
icon (I) is displayed in the selected direction.
• Apply flash mode (A56), self-timer (A59), focus mode (A62) and exposure
compensation (A64) settings with this step, if necessary.
• Press the k button again to reselect the direction.
3 Frame the first portion of the
panorama scene, and take the first
picture.
• The camera focuses on the subject at the
center of the frame.
• 1/3 of the image will be displayed as
translucent.
25m 0s
1/250
F3.0
840
4 Shoot the next picture.
• Match the outline of the next picture so that
1/3 of the frame overlaps the previous
picture, and press the shutter-release button.
• Repeat until you have taken the necessary
number of pictures to complete the image.
E6
End
839
Using Panorama Assist
5 Press the k button when shooting is completed.
• The camera returns to step 2.
B Notes on Panorama Assist
• Set the flash mode, self-timer, focus mode and exposure compensation before releasing the
shutter for the first picture. The settings cannot be changed after shooting the first picture.
Pictures cannot be deleted, nor can zoom, Image quality (A72) or Image size (A73) be
adjusted after shooting the first picture.
• The panorama series is terminated if the auto off function (E73) triggers the standby mode
during shooting. To prevent this, setting a longer time for the auto off function is recommended.
C R (Exposure Lock) Indicator
When using panorama assist mode, all pictures in the panorama
have the same exposure, white balance, and focus as the first
picture of the panorama.
When the first picture is shot, R is displayed on the monitor
to indicate that exposure, white balance, and focus are locked.
C Panorama Creation with Panorama Maker
Transfer pictures to a computer (A90) and use Panorama Maker to join them in a single panorama.
• Panorama Maker can be installed on a computer using the included ViewNX 2 CD-ROM (A88).
• For more information on using Panorama Maker, refer to the on-screen instructions and help
information contained in Panorama Maker.
Reference Section
C More Information
See “File and Folder Names” (E90) for more information.
E7
Playing Images in a Sequence
Deleting Images in a Sequence
When Sequence display options (E58) is set to Key picture only in the
playback menu, if the l button is pressed and the deletion method is selected,
the following images are deleted.
• When a sequence is displayed by its key picture only:
- Current image: When the sequence is selected, all images in the sequence
are deleted.
- Erase selected images: When the key picture is selected in the erase
selected images screen (A34), all images in the sequence are deleted.
- All images: All images including the sequence that is displayed are deleted.
• If the key picture is selected and the k button is pressed to display individual
images in the sequence before pressing the l button:
The deletion methods change to the followings.
- Current image: Delete the image that is
displayed.
Delete
- Erase selected images: Select multiple images in
the sequence to delete in the erase selected
Current image
images screen (A34).
Erase selected images
- Entire sequence: All images in the sequence,
Entire sequence
including the image that is displayed, are deleted.
Playback Menu Options Available When Using Sequence
• Quick retouch1
• D-Lighting1
• Skin softening1
• Filter effects1
• Print order2
• Slide show
• Protect2
➝ E12
➝ E12
➝ E13
➝ E14
➝ E52
➝ E54
➝ E55
• Rotate image1
• Small picture1
• Voice memo1
• Copy2
• Sequence display options
• Choose key picture
Reference Section
When the d button is pressed during an image sequence playback, the
following menu operations are available.
➝ E55
➝ E15
➝ E56
➝ E57
➝ E58
➝ E58
1
Press the d button after displaying individual images. Settings can be applied to
individual images.
2 When the d button is pressed during displaying only the key picture, the same settings
can be applied to all images in that sequence. Press the d button after displaying
individual images to apply settings to individual images.
E9
Editing Still Images
Editing Features
Images can be easily edited with this camera using the functions below. Edited
images are stored as separate files (E90).
Editing function
Application
Quick retouch (E12)
Easily create a copy with enhanced contrast and richer colors.
D-Lighting (E12)
Create a copy of the current picture with enhanced brightness
and contrast, brightening dark portions of the picture.
Skin softening (E13)
Make the facial skin tones softer.
Filter effects (E14)
Apply a variety of effects using digital filter. The available effects
are Soft, Selective color, Cross screen, Fisheye, Miniature
effect, Painting and Vignette.
Small picture (E15)
Create a small copy of pictures suitable for uses such as e-mail
attachments.
Crop (E16)
Crop a portion of the picture. Use to zoom in on a subject or
arrange a composition.
C Original Pictures and Edited Copies
Reference Section
• Copies created with editing functions are not deleted if the original pictures are deleted. The
original pictures are not deleted if copies created with editing functions are deleted.
• Edited copies are stored with the same shooting date and time as the original.
• Even if the pictures that are marked for Print order (E52) or Protect (E55) are used for
editing, these settings are not reflected on the edited copies.
C More Information
See “File and Folder Names“ (E90) for more information.
E10
Editing Still Images
B Notes on Image Editing
• The following pictures cannot be edited.
- Pictures with 16:9, 3:2 or 1:1 aspect ratio
- Pictures taken using Easy panorama or 3D photography
- Pictures taken with cameras other than the COOLPIX P520
• When no faces are detected in the picture, skin softening cannot be applied.
• If a copy created using the COOLPIX P520 is viewed on a different digital camera, it may not be
possible to display the picture properly or transfer it to a computer.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
• For a sequence displayed using the key picture only setting (E8), perform one of the following
operations before editing.
- Press the k button to display individual images, and then select an image in the sequence.
- Set Sequence display options (E58) to Individual pictures so that each image is displayed
individually, and then select an image.
C Restrictions on Image Editing
The following restrictions apply when editing pictures that were created by editing.
Editing functions used
Editing functions to add
Skin softening
Filter effects
Additional editing functions can be used.
Small picture
Crop
No additional editing functions can be used.
• Copies created by editing cannot be edited again using the same editing function.
• To use an editing function together with small picture or crop, use the other editing function first,
and use small picture or crop as the last editing function performed on that picture.
• Pictures that were taken using skin softening can be edited using skin softening.
• Pictures that were extracted from a movie cannot be edited using the quick retouch or skin
softening function.
Reference Section
Quick retouch
D-Lighting
Skin softening, Filter effects, Small picture or Crop can be used.
Quick retouch and D-Lighting cannot be used in combination
with each other.
E11
Editing Still Images
k Quick Retouch: Enhancing Contrast and Saturation
Select a picture (A32) M d button (A10) M k Quick retouch
Press the multi selector H or I to choose the
setting level, and press the k button.
Quick retouch
• The original version is displayed on the left and the
edited version is displayed on the right.
• To cancel, press J.
• Quick retouched copies are stored as separate files and
recognized by the s icon displayed in playback mode
(A14).
Normal
Amount
I D-Lighting: Enhancing Brightness and Contrast
Select a picture (A32) M d button (A10) M I D-Lighting
Press the multi selector H or I to choose the
setting level, and press the k button.
Reference Section
E12
• The original version is displayed on the left and the
edited version is displayed on the right.
• To cancel, press J.
• D-Lighting copies are stored as separate files and
recognized by the c icon displayed in playback mode
(A14).
D-Lighting
Normal
Amount
Editing Still Images
e Skin Softening: Softening Skin Tones
Select a picture (A32) M d button (A10) M e Skin softening
1 Press the multi selector H or I to choose the
setting level, and press the k button.
• A confirmation screen is displayed, and the image is
displayed zoomed in on the face edited by skin
softening.
• To cancel, press J.
2 Confirm the results and press the k button.
Skin softening
Normal
Amount
Preview
• Up to 12 faces, in order of proximity to the center of the
frame, can be enhanced.
• When multiple faces are edited using skin softening,
use the multi selector J or K to switch the face that is
displayed.
Back
Save
• To adjust the extent of skin softening, press the d
button and return to step 1.
• Copies created by editing with skin softening are stored as separate files and
recognized by the E icon displayed in playback mode (A14).
• Depending on conditions such as the direction the subject is facing or the brightness of the face,
the face may not be detected properly, or the desired effect may not be achieved.
• If no faces are detected in the image, a warning is displayed and the screen returns to the playback
menu.
Reference Section
B Notes on Skin Softening
E13
Editing Still Images
p Filter Effects: Applying Digital Filter Effects
Select a picture (A32) M d button (A10) M p Filter effects
Option
Description
Gently soften the focus of the image from the center to the edge. In
pictures taken with face detection (A80) or pet detection (A44)
selected, areas around faces will be blurred.
Soft
Selective color
Keep only selected image colors and makes other colors black-and-white.
Cross screen
Produce star-like rays of light that radiate outward from bright objects
such as sunlight reflections and city lights. Suitable for night scenes.
Fisheye
Create images that look like they were shot with a fisheye lens. Suitable
for pictures shot in macro mode.
Miniature effect
Create images that look like close-up photos of a diorama. Suitable for
pictures shot while looking down from a high location, with the main
subject near the center of the frame.
Painting
Create images with the ambience of paintings.
Vignette
Create images by lowering the peripheral light intensity from the center
to the edges of an image.
1 Press the multi selector H or I to choose the
filter effect type and press the k button.
• When Cross screen, Fisheye, Miniature effect,
Painting or Vignette is selected, proceed to step 3.
Reference Section
2 Adjust the effect and press the k button.
Filter effects
Soft
Selective color
Cross screen
Fisheye
Miniature effect
Painting
Vignette
Soft
• Soft: Press H or I to choose the extent of the effect.
• Selective color: Press H or I to select the color to
keep.
Normal
Extent
Soft
3 Check the effect and press the k button.
Preview
• To cancel, press J.
• Copies created by editing with filter effect are stored as
separate files and recognized by the c icon displayed in
playback mode (A14).
Back
E14
Save
Editing Still Images
g Small Picture: Reducing the Size of an Image
Select a picture (A32) M d button (A10) M g Small picture
1 Press the multi selector H or I to choose the
desired copy size and press the k button.
• The available sizes are 640×480, 320×240 and
160×120.
Small picture
640×480
320×240
160×120
2 Choose Yes and press the k button.
• The created copies are stored as separate files
(compression ratio of about 1:16).
• Images created using small picture are displayed as
small images in playback mode and C is displayed
(A14).
Create small picture file?
Yes
No
Reference Section
E15
Editing Still Images
a Crop: Creating a Cropped Copy
Create a copy containing only the portion visible on the monitor screen when
u is displayed with playback zoom (A82) enabled.
1 Enlarge the picture for cropping (A82).
2 Refine copy composition.
• Rotate the zoom control toward g (i) or f (h) to
adjust the zoom ratio.
• Press the multi selector H, I, J or K to scroll the
picture until only the portion you want to copy is
visible on the monitor.
4.0
3 Press the d button.
4 Use the multi selector to choose Yes and press
the k button.
Reference Section
• Cropped copies are stored as separate files and
recognized by the a icon displayed in playback mode
(A14).
Save this image as
displayed?
Yes
No
C Image Size
The narrower the cropping range, the smaller the size (amount of pixels) of the cropped picture
copy. When the image size setting for a cropped copy is 320 × 240 or 160 × 120, a small image is
displayed in playback mode.
C Cropping the Picture in its Current “Tall” Orientation
Use the Rotate image option (E55) to rotate the picture so that it is displayed in landscape
orientation. After cropping the picture, rotate the cropped picture back to “tall” orientation. The
picture displayed in “tall” orientation can be cropped by zooming in on the picture until the black
bars displayed on the both sides of the monitor disappear. The cropped picture is displayed in
landscape orientation.
E16
Connecting the Camera to a TV (Viewing Images on a TV)
3 Tune the television to the video channel.
• See the instruction manual provided with your TV for details.
4 Hold down the c button to turn on the
camera.
• The camera enters playback mode, and the recorded
pictures are displayed on the TV.
• While the camera is connected to the TV, the monitor
remains off.
B Note on Connecting an HDMI Cable
An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to a
TV. The output terminal on this camera is an HDMI mini connector (Type C). When purchasing an
HDMI cable, be sure that the device end of the cable is an HDMI mini connector.
B Note on Connecting the Cable
When connecting the cable, be sure that the plug is oriented correctly. Do not force the plug into
the camera. When disconnecting the cable, do not pull the plug at an angle.
B When Nothing Appears on the TV
Make sure that TV settings (E75) in the setup menu is appropriate for your television.
C Using the TV’s Remote Control (HDMI Device Control)
Reference Section
The remote control of a TV that conforms to the HDMI-CEC standard can be used to operate the
camera during playback.
Instead of the multi selector or zoom control, the remote control can be used for picture selection,
playback/pause of movies, switching between full-frame playback and 4-picture thumbnail display,
etc.
• Set HDMI device control (E75) of TV settings to On (default setting) in the setup menu, and
connect the camera to the TV with an HDMI cable.
• Point the remote control at the TV to operate.
• See your TV’s instruction manual or other related documentation to check whether your TV
conforms to the HDMI-CEC standard.
C HDMI and HDMI-CEC
“HDMI” is an abbreviation of High-Definition Multimedia Interface, which is one type of multimedia
interface.
“HDMI-CEC” is an abbreviation of HDMI-Consumer Electronics Control, which enables operations to
be linked between compatible devices.
E18
Connecting the Camera to a Printer (Direct Print)
Users of PictBridge-compatible (F22) printers can connect the camera directly to
the printer and print pictures without using a computer.
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.
• Check the printer settings.
3 Connect the camera to the printer using the included USB cable.
• Be sure that the plug is oriented correctly. When disconnecting the cable, do not pull
the plug at an angle.
4 The camera is automatically turned on.
Reference Section
• When connected correctly, the PictBridge startup screen (1) is displayed on the
monitor screen of the camera. Then the Print selection screen (2) is displayed.
Print selection
15/05
2013
NO. 32
32
B If the PictBridge Startup Screen Is Not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (E76) in
the camera’s setup menu to Off and reconnect the cable.
B Notes on Power Source
• When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
• If the AC Adapter EH-62A (available separately) (E92) is used, the COOLPIX P520 can be powered
from an electrical outlet. Do not, under any circumstances, use an AC adapter other than the EH-62A.
Failure to observe this precaution could result in overheating or damage to the camera.
E19
Connecting the Camera to a Printer (Direct Print)
Printing Individual Images
After connecting the camera to the printer correctly (E19), print pictures by
following the procedure below.
1 Use the multi selector to choose the picture to
be printed, and press the k button.
Print selection
15/05
2013
• Rotate the zoom control toward f (h) to display
12 thumbnails, or toward g (i) to switch back to fullframe playback mode.
2 Set the number of copies and paper size.
• Choose Copies and press the k button to set the
number of copies (up to 9).
• Choose Paper size and press the k button to set the
paper size (E23).
To prioritize the printer settings, select Default.
3 Choose Start print and press the k button.
NO. 32
32
PictBridge
1 prints
Start print
Copies
Paper size
PictBridge
4 prints
Reference Section
Start print
Copies
Paper size
4 Printing starts.
• The monitor display returns to that shown in step 1
when printing is complete.
• When printing is complete, turn the camera off and
then disconnect the USB cable.
Printing
2 / 4
Cancel
Current print/total
number of prints
E20
Connecting the Camera to a Printer (Direct Print)
Printing Multiple Images
After connecting the camera to the printer correctly (E19), print pictures by
following the procedure below.
1 When the Print selection screen is displayed,
press the d button.
• To exit the print menu, press the d button.
2 Choose Print selection, Print all images or
DPOF printing and press the k button.
• Choose Paper size and press the k button to set the
paper size (E23).
To prioritize the printer settings, select Default.
Print menu
Print selection
Print all images
DPOF printing
Paper size
Print selection
Reference Section
Choose the pictures (up to a maximum of 99) and
Print selection
number of copies (up to 9 per picture).
• Press the multi selector J or K to choose the
1
1
2
3
pictures, and press H or I to set the number
of copies for each.
• Pictures selected for printing can be
recognized by the check mark icon and the
Back
numeral indicating the number of copies to be
printed. If the numeral is set to 0, the print selection is cancelled.
• Rotate the zoom control toward g (i) to switch to full-frame playback mode,
or f (h) to switch to 12-thumbnail display.
• Press the k button when setting is complete.
• When the menu shown on the right is
Print selection
displayed, choose Start print and press the
10 prints
k button to start printing.
Start print
Cancel
E21
Connecting the Camera to a Printer (Direct Print)
Print all images
All pictures stored in the internal memory or on
the memory card are printed one per each.
• When the menu shown on the right is
displayed, choose Start print and press the
k button to start printing.
Print all images
18 prints
Start print
Cancel
DPOF printing
Pictures for which a print order was created in
Print order option (E52) can be printed.
• When the menu shown on the right is
displayed, choose Start print and press the
k button to start printing.
DPOF printing
• To view the current print order, choose View
images and press the k button. To print
pictures, press the k button again.
View images
10 prints
Start print
View images
Cancel
Back
Reference Section
3 Printing starts.
• The monitor display returns to that shown in step 2
when printing is complete.
Printing
2 / 10
Cancel
Current print/total
number of prints
E22
10
Connecting the Camera to a Printer (Direct Print)
C More Information
See “Printing Images of Size 1:1” (A74) for more information.
C Paper Size
The camera supports the following paper sizes: Default (the default paper size for the current
printer), 3.5×5 in., 5×7 in., 100×150 mm, 4×6 in., 8×10 in., Letter, A3, and A4. Only sizes
supported by the current printer are displayed.
C Printing Pictures
In addition to printing pictures transferred to a computer and printing pictures with a direct camerato-printer connection, the following options are also available for printing pictures recorded on the
memory card:
• Insert a memory card into a DPOF-compatible printer’s card slot.
• Take a memory card to a digital photo lab.
For printing using these methods, specify the pictures and the number of prints each using the
Print order (E52) option in the playback menu.
Reference Section
E23
Movies
Editing Movies
Extracting Only the Desired Portions of the Movie
Only the desired portions of a recorded movie can be saved as a separate file
(except for movies recorded with n 1080/60i, q 1080/50i, p iFrame
540/30p or iFrame 540/25p).
1 Play back the movie to be edited and pause at the start point of the
portion that is to be extracted (A97).
2 Use the multi selector J or K to choose I
on the playback control, and press the k
button.
• The movie editing screen is displayed.
7m42s
3 Press H or I to choose J (choose start
point) on the editing playback control.
• Rotate the multi selector or press J or K to adjust the
start position.
• To cancel, press H or I to choose L (back) and press
the k button.
Reference Section
4 Press H or I to choose K (choose end point).
Choose start point
8m48s
Choose end point
• Rotate the multi selector or press J or K to move the
end point at the right end to the end position of the
required section.
• To check the playback of the movie in the specified range
before saving it, choose c (preview) and press the k
5m52s
button. During preview playback, the volume can be
adjusted with the zoom control g/f. Use the multi
selector to fast forward or rewind. To stop the preview playback, press the k button again.
5 After finishing the settings, press H or I to choose m (save) and press
the k button.
6 Choose Yes and press the k button.
• The edited movie is saved.
Save OK?
Yes
No
E24
Editing Movies
B Notes on Editing Movies
• Use a fully charged battery to prevent the camera from turning off during editing. When the
battery level is B, movie editing is not possible.
• Once a movie is created through editing, it cannot be used again for extracting a movie. To extract
another range, select and edit the original movie.
• Because the edited movies are extracted in one-second units, they may vary slightly from the set
start point and end point. Sections shorter than two seconds cannot be extracted.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
C More Information
See “File and Folder Names” (E90) for more information.
Saving a Frame from a Movie as a Still Picture
A frame from a recorded movie can be extracted and saved as a still picture
(except for movies recorded with n 1080/60i, q 1080/50i, p iFrame
540/30p or iFrame 540/25p).
• Pause a movie and display the frame to be extracted
(A97).
• Choose H on the playback control with the multi
selector J or K and press the k button.
7m42s
7m42
Copy this frame as a still image?
Yes
No
Reference Section
• When the confirmation dialog is displayed, choose
Yes and press the k button to save.
• The still picture is saved with Normal as the image
quality. The image size is determined by the type
(image size) (E48) of the original movie.
For example, the image size of a still picture saved
from a movie recorded with d 1080P/30p or
1080P/25p is i (1920 × 1080 pixels).
E25
Menu
Shooting Menu (j, k, l or m Mode)
Image Quality and Image Size
To set the image quality and image size, see “Changing the Image Quality and
Image Size” (A 72).
Picture Control (COOLPIX Picture Control)
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M Picture Control
Change the settings for image recording according to the shooting scene or your
preferences. Sharpness, contrast and saturation can be adjusted in detail.
Reference Section
Option
Description
b
Standard
(default
setting)
Standard processing for balanced results. Recommended for
most situations.
c
Neutral
Minimal processing for natural results. Choose for pictures that
will later be extensively processed or retouched.
d
Vivid
Pictures are enhanced for a vivid, photoprint effect. Choose for
pictures that emphasize primary colors, such as blue, red, and
green.
e
Monochrome
Take monochrome photographs such as in black-and-white or
sepia.
f
Custom 1*
Change to the setting for Custom 1 in COOLPIX Custom Picture
Control.
g
Custom 2*
Change to the setting for Custom 2 in COOLPIX Custom Picture
Control.
* Only displayed when the setting customized in Custom Picture Control (E30) has
been registered.
The icon for the current setting other than Standard is displayed on the monitor
(A12).
B COOLPIX Picture Control
• The COOLPIX Picture Control feature of the COOLPIX P520 cannot be used with other makes of
cameras, Capture NX, Capture NX 2 and ViewNX 2 Picture Control feature.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A75) for more information.
E26
Shooting Menu (j, k, l or m Mode)
Customizing Existing COOLPIX Picture Controls: Quick Adjust and
Manual Adjust
COOLPIX Picture Control can be customized using Quick adjust, which allows for
balanced adjustment of sharpness, contrast, saturation and other image editing
components, or manual adjust, which allows for detailed adjusting of the
components individually.
1 Use the multi selector to choose the type of
COOLPIX Picture Control and press the k
button.
Picture Control
Standard
Neutral
Vivid
Monochrome
View grid
2 Press H or I to highlight the desired setting
(E28) and press J or K to choose a value.
• Press the k button to set the value.
• When COOLPIX Picture Controls are modified from the
default settings, an asterisk (*) is displayed after the
options in the Picture Control Setting menu.
• To change the values to the default setting, select
Reset and press the k button.
Standard
Quick adjust
Image sharpening
Contrast
Saturation
Reset
Back
When the zoom control is rotated toward g (i) while the screen in
Standard
step 1 of the above procedure is displayed, the contrast and
saturation are displayed using a grid. The vertical axis indicates the
contrast level, and the horizontal axis indicates the saturation.
Rotate the zoom control toward g (i) again to return to the
previous screen.
Back
The COOLPIX Picture Control grid displays the current and default
settings in relation to the other COOLPIX Picture Controls.
• Rotate the multi selector to change to other COOLPIX Picture Controls.
• Press the k button to display the COOLPIX Picture Control Setting screen (step 2 above).
• For Monochrome, the grid is displayed for contrast only.
• The grid is also displayed when adjusting Contrast or Saturation with manual adjustment.
Reference Section
C View Grid of COOLPIX Picture Control
E27
Shooting Menu (j, k, l or m Mode)
Types of Quick Adjust and Manual Adjust
Option
Description
Reference Section
Quick adjust 1
Adjust the sharpness, contrast and saturation levels
automatically. Five levels of adjustment are available from -2 to
+2.
Choose from options between -2 and +2 to reduce or
emphasize the effect of the selected COOLPIX Picture Control.
The default setting is 0.
Image sharpening
Control how much outlines are sharpened during shooting.
Choose A (auto) to adjust sharpening automatically, or choose
from seven levels of adjustment between 0 (no sharpening) and
6.
The higher the number, the sharper the image, and the lower
the number, the softer the image.
The default setting is 3 for Standard or Monochrome, 2 for
Neutral and 4 for Vivid.
Contrast
Control the contrast. Choose A (auto) to adjust the contrast
automatically according to the type of scene, or choose from
seven levels of adjustment between -3 and +3.
Setting to the – side makes it into an image with a softer
appearance, and setting to the + side gives it a harder
appearance. Choose lower values to prevent highlights in
portrait subjects from being “washed out” in direct sunlight,
higher values to preserve detail in misty landscapes and other
low-contrast subjects.
The default setting is 0.
Saturation 2
Control the vividness of colors. Choose A (auto) to adjust
saturation automatically according to the type of scene, or seven
levels of adjustment can be done by choosing from values
between -3 and +3.
Setting to the – side reduces the vividness, and setting to the +
side increases the vividness.
The default setting is 0.
Filter effects 3
Simulate the effect of color filters on monochrome photographs.
Choose from OFF (the default setting), Y (yellow), O (orange), R
(red), and G (green).
Y, O, R:
Enhance contrast. Can be used to tone down the brightness of
the sky in landscape photographs. The contrast is strengthened
in the order Y ➝ O ➝ R.
G:
Soften skin tones. Suitable for portraits.
E28
Shooting Menu (j, k, l or m Mode)
Option
Toning 3
1
2
3
Description
Control the tint used in monochrome photographs from B&W
(black-and-white, the default setting), Sepia, and Cyanotype
(blue-tinted monochrome).
Pressing the multi selector I when Sepia or Cyanotype is
selected enables you to choose from seven levels of saturation.
Press J or K to adjust the saturation.
Quick adjust is not available in Neutral, Monochrome, Custom 1 and Custom 2.
The values set manually are disabled if quick adjust is used after manual setting.
Not displayed for Monochrome.
Only displayed for Monochrome.
B Note on Image Sharpening
The effects of Image sharpening cannot be previewed on the monitor during shooting. Check the
results in playback mode.
B Note on Contrast
When Active D-Lighting (E46) is set to settings other than Off, the J mark is displayed for
Contrast and contrast cannot be adjusted.
B Contrast, Saturation and A (Auto)
C Options that Can Be Adjusted in Custom 1 and Custom 2
The same option as that of the original COOLPIX Picture Control can be adjusted if Custom 1 or
Custom 2 is selected.
Reference Section
• Results for contrast and saturation vary with the exposure, and the position and size of the subject
in the frame.
• The setting for the COOLPIX Picture Control which has A (auto) selected for either Contrast or
Saturation is displayed in green in the COOLPIX Picture Control grid.
E29
Shooting Menu (j, k, l or m Mode)
Custom Picture Control (COOLPIX Custom Picture Control)
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M Custom Picture Control
The picture editing options created by customizing COOLPIX Custom Picture
Controls can be registered up to 2 options. The registered options can be
displayed as Custom 1 and Custom 2 in COOLPIX Custom Picture Control.
Creating COOLPIX Custom Picture Controls
1 Use the multi selector to choose Edit and
save, and press the k button.
Custom Picture Control
Edit and save
Delete
2 Choose the original COOLPIX Picture Control (E27) to be edited, and
press the k button.
3 Press H or I to highlight the desired setting and press J or K to
choose a value (E27).
Reference Section
• The options are the same as those for adjusting the COOLPIX Picture Control.
• Press the k button to display the Save as screen.
• To change the values to the default setting, select Reset and press the k button.
4 Choose the registration destination and press
the k button.
• The COOLPIX Custom Picture Control is registered.
• Custom 1 or Custom 2 can be selected from the
Picture Control and Custom Picture Control
selection screen after registration.
Save as
Custom 1
Custom 2
C Deleting COOLPIX Custom Picture Controls
Select Delete in step 1 of “Creating COOLPIX Custom Picture Controls” to delete a registered
Custom Picture Control.
E30
Shooting Menu (j, k, l or m Mode)
White Balance (Adjusting Hue)
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M White balance
The color of light reflected from an object varies with the color of the light source.
The human brain is able to adapt to changes in the color of the light source, with
the result that white objects appear white whether seen in the shade, direct
sunlight, or under incandescent lighting. Digital cameras can mimic this
adjustment of the human eye by processing images according to the color of the
light source. This is known as “white balance.” For natural colors, select a white
balance setting that matches the light source before shooting.
Although the default setting, Auto (normal), can be used under most types of
lighting, you can apply the white balance setting suited to a particular light source
to achieve more accurate results.
Option
Description
Auto (normal)
a1 (default
setting)
White balance is automatically adjusted to suit lighting
conditions. Best choice in most situations.
When set to Auto (warm lighting), the images are preserved
with warm colors if they are shot under an incandescent light
source. When using the flash, according to the brightness of the
flash, the images are adjusted to suitable white balance.
Auto (warm
lighting)
b
Preset manual
Useful when shooting under unusual lighting. See “Using Preset
Manual” for more information (E32).
White balance adjusted for direct sunlight.
c
Daylight*
d
Incandescent* Use under incandescent lighting.
e
Fluorescent
(1 to 3)
Use under most types of fluorescent lighting. Choose one of 1
(white fluorescent), 2 (daylight white/neutral fluorescent) and 3
(daylight fluorescent).
f
Cloudy*
Use when taking pictures under overcast skies.
g
Flash*
Use with the flash.
Reference Section
a2
* Fine adjustments in seven steps are available. Apply positive (+) to increase blue hue and
negative (–) to increase red hue.
The icon for the current setting other than Auto (normal) is displayed on the
monitor (A12).
B Notes on White Balance
• At white-balance settings other than Auto (normal), Auto (warm lighting) or Flash, lower the
flash.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A 75) for more information.
E31
Shooting Menu (j, k, l or m Mode)
Using Preset Manual
Use when you want to make pictures taken under unusual lighting conditions
(e.g., lamps with reddish-light) look as though they were shot in normal light.
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Display the shooting menu (A67), use the
multi selector to set White balance to
b Preset manual, then press the k button.
• The lens extends to the zoom position for
measurement.
3 Choose Measure.
• To apply the most recently measured white balance
value, select Cancel and press the k button. The most
recently measured white balance value will be set
without re-measuring the value.
Reference Section
4 Frame a white or gray reference object in the
reference object frame and press the k
button.
• The shutter is released and the new white balance
preset value is set (no picture is recorded).
White balance
Auto (normal)
Auto (warm lighting)
Preset manual
Daylight
Incandescent
Fluorescent
Cloudy
Preset manual
Cancel
Measure
Preset manual
Cancel
Measure
Reference object frame
B Note on Preset Manual
The camera cannot measure a white balance value for when the flash fires. When shooting with the
flash, set White balance to Auto (normal), Auto (warm lighting) or Flash.
E32
Shooting Menu (j, k, l or m Mode)
Metering
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M Metering
The process of measuring the brightness of the subject to determine the exposure
is known as “metering.”
Use this option to choose how the camera meters exposure.
Option
Description
Matrix (default
setting)
The camera uses a wide area of the screen for metering.
This metering mode provides the appropriate exposure for a
variety of shooting conditions. Recommended for typical
shooting.
q Center-weighted
The camera meters the entire frame but assigns greatest weight
to the subject at the center of the frame. The classic metering for
portraits; it preserves background details while letting lighting
conditions at the center of the frame determine exposure. Can
be used with focus lock (A81) to meter off-center subjects.
r Spot
The camera meters the area shown by the circle at the center of
the frame. This can be used when the subject is much lighter or
darker than the background. Ensure that the subject is within the
area shown by the circle when shooting. Can be used with focus
lock (A81) to meter off-center subjects.
G
• When the digital zoom is in effect, Metering is set to Center-weighted or Spot depending on
the magnification of an enlargement.
• If AF area mode (E40) is set to Manual when Metering is set to Matrix, the camera meters by
assigning greatest weight to the focus area.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A75) for more information.
Reference Section
B Notes on Metering
C Metering Area
When Center-weighted or Spot is selected for Metering, the metering range guide (A12) is
displayed (except when digital zoom is used).
E33
Shooting Menu (j, k, l or m Mode)
Continuous Shooting
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M Continuous
Change the settings for continuous shooting and BSS (Best Shot Selector).
Option
U
Single (default
setting)
k
Continuous H
m
Continuous L
Pre-shooting
cache
n
Continuous H:
120 fps
j
Continuous H:
60 fps
Reference Section
q
D
E34
BSS (Best Shot
Selector)
Description
One picture is shot each time the shutter-release button is
pressed.
Pictures are continuously shot while the shutter-release button is
pressed all the way. Shooting ends when the shutter-release
button is released or when the maximum number of continuous
shooting frames is reached.
• Continuous H: Up to 7 pictures are continuously shot at a rate
of about 7 frames per second.
• Continuous L: Up to 30 pictures are continuously shot at a
rate of about 1 frame per second (when image quality is set to
Normal and image size is set to r 4896×3672 ).
Pre-shooting cache makes it easy to capture perfect moments, by
saving images from before the shutter-release button was
pressed all the way. Pre-shooting cache shooting begins when
the shutter-release button is pressed halfway, and shooting
continues while the shutter-release button is pressed all the way
(E36).
• Frame rate: up to 15 fps
• Number of frames: up to 20 frames (including up to 5 frames
captured in the pre-shooting cache)
Shooting ends when the shutter-release button is released or
when the maximum number of frames has been shot.
The image quality is fixed at Normal and the image size is fixed at
C (2048×1536 pixels).
Each time the shutter-release button is pressed all the way,
pictures are continuously shot using a high shutter speed.
• Continuous H: 120 fps: 60 frames are captured at a speed of
about 1/125 seconds or faster.
The image size is fixed at f (640 × 480 pixels).
• Continuous H: 60 fps: 60 frames are captured at a speed of
about 1/60 seconds or faster.
The image size to be recorded is fixed at O (1920 × 1080 pixels).
BSS is recommended for shooting under low lighting without the
flash, with the camera zoomed in, or in other situations in which
camera shake is likely to blur pictures. Keep pressing the shutterrelease button all the way, and up to 10 pictures are shot and the
camera automatically selects and saves only the sharpest picture
in the series.
Shooting Menu (j, k, l or m Mode)
Option
Description
W
Multi-shot 16
Each time the shutter-release button is
pressed all the way, the camera shoots
16 pictures at a rate of about 30 frames per
second and arranges them in a single picture.
• The image quality is fixed at Normal and
the image size is fixed at D (2560 × 1920
pixels).
• The digital zoom is not available.
X
Intvl timer
shooting
The camera shoots still pictures automatically at the specified
interval (E36).
The icon for the current setting other than Single is displayed on the monitor (A12).
B Notes on Continuous Shooting
• Focus, exposure and white balance are fixed at the values determined with the first shot in each
series.
• The frame rate may become slower depending on the image quality, image size, memory card
type or shooting conditions.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A75) for more information.
B Notes on Continuous H
B Note on BSS
BSS is suited for shooting stationary subjects. BSS may not produce the desired results if the subject
moves or the composition changes.
Reference Section
• It may take some time to save the images after shooting. The amount of time it takes to finish saving
the captured images depends on the number of images, the write speed of the memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images.
• Banding or variance in brightness or hue may occur in images that were captured under lighting
that flashes quickly at high speeds, such as fluorescent, mercury-vapor, or sodium-vapor lighting.
B Note on Multi-shot 16
Banding or variance in brightness or hue may occur in images that were captured under lighting
that flashes quickly at high speeds, such as fluorescent, mercury-vapor, or sodium-vapor lighting.
E35
Shooting Menu (j, k, l or m Mode)
C Pre-shooting Cache
If Pre-shooting cache is selected, shooting begins when the shutter-release button is pressed
halfway for 0.5 seconds or longer, and images captured before the shutter-release button is pressed
all the way are saved along with images captured after the shutter-release button is pressed all the
way. Up to 5 images can be saved in the pre-shooting cache.
The current pre-shooting cache setting is indicated by an icon when shooting (A12). The preshooting cache icon lights in green while the shutter-release button is pressed halfway.
Press down halfway
Press down all the way
Images saved by
pressing halfway
Images saved by
pressing all the way
Reference Section
• If the number of exposures remaining is less than 6, the pictures taken with the pre-shooting
cache are not recorded. Before shooting, check that there are 6 or more exposures remaining.
Interval Timer Shooting
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M Continuous
Choose from 30 s, 1 min, 5 min or 10 min.
1 Use the multi selector to select X Intvl timer
shooting for the Continuous setting, and then
press the k button.
E36
Continuous
Multi-shot 16
Intvl timer shooting
Shooting Menu (j, k, l or m Mode)
2 Choose the interval between each shot and
press the k button.
Intvl timer shooting
30 s
1 min
5 min
10 min
3 Press the d button.
• The camera returns to the shooting screen.
4 Press the shutter-release button all the way to
shoot the first picture and start interval timer
shooting.
• The monitor is turned off and the power-on lamp flashes
between shots.
• The monitor reactivates automatically immediately
before the next picture is shot.
25m 0s
1/250
F5.6
840
5 Press the shutter-release button all the way again to finish shooting.
• Shooting finishes automatically if the internal memory or memory card becomes full.
B Notes on Interval Timer Shooting
C More Information
See “File and Folder Names” (E90) for more information.
Reference Section
• To prevent the camera from turning off unexpectedly during shooting, use a fully charged battery.
• If the AC Adapter EH-62A (available separately) (E92) is used, the COOLPIX P520 can be powered
from an electrical outlet. Do not, under any circumstances, use an AC adapter other than the EH-62A.
Failure to observe this precaution could result in overheating or damage to the camera.
• Do not rotate the mode dial to a different setting while performing interval timer shooting.
E37
Shooting Menu (j, k, l or m Mode)
ISO Sensitivity
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M ISO sensitivity
The higher the ISO sensitivity, the less light needed for taking pictures.
The higher the ISO sensitivity, the darker the subject that can be shot. Additionally,
even with subjects of similar brightness, pictures can be taken at faster shutter
speeds, and blurring caused by camera shake and subject movement can be
reduced.
• Setting the ISO sensitivity to a high level is effective when shooting dark
subjects, not using the flash, shooting at the telephoto zoom position and
similar situations, but the pictures taken may be slightly grainy.
Reference Section
Option
Description
ISO sensitivity
• Auto (default setting): The sensitivity is ISO 80 in bright places; in dark
places the camera automatically raises the sensitivity to a maximum
of ISO 1600.
• Fixed range auto: Choose the range in which the camera
automatically adjusts ISO sensitivity from ISO 80-400 (default setting)
and ISO 80-800. The camera does not raise sensitivity beyond the
maximum value in the selected range. Set the maximum value for ISO
sensitivity to control “grain” that appears in images.
• 80 to 3200, Hi 1 (equivalent to ISO 6400):
ISO sensitivity is fixed at the specified value.
Minimum
shutter speed
When the shooting mode is j or l and ISO sensitivity is set to Auto
or Fixed range auto, the shutter speed at which the ISO sensitivity
automatic control starts to function (1/125 to 1 second) can be set. The
default setting is None. If the exposure is insufficient with the shutter
speed that is set here, the ISO sensitivity is increased automatically to
obtain the correct exposure. If the exposure is still insufficient even after
the ISO sensitivity is increased, the shutter speed slows down.
The icon for the current setting is displayed on the monitor during shooting (A12).
• When Auto is selected, the E icon is not displayed at ISO 80, but is displayed
if the ISO sensitivity automatically increases to higher than 80.
• When Fixed range auto is selected, the U icon and the maximum ISO
sensitivity value are displayed.
B Notes on ISO Sensitivity
• In D (Manual) mode, when set to Auto or Fixed range auto the ISO sensitivity is fixed at ISO 80.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A75) for more information.
E38
Shooting Menu (j, k, l or m Mode)
Exposure Bracketing
Rotate the mode dial to j, k or l M d button M j, k or l tab (A10)
M Exposure bracketing
The exposure (brightness) can be changed automatically during continuous
shooting. This is effective for shooting when it is difficult to adjust the picture
brightness.
Option
Description
±0.3
Camera varies exposure by 0, –0.3, and +0.3 over next three shots. The
three shots are taken in sequence when the shutter-release button is
pressed all the way.
±0.7
Camera varies exposure by 0, –0.7, and +0.7 over next three shots. The
three shots are taken in sequence when the shutter-release button is
pressed all the way.
±1.0
Camera varies exposure by 0, –1.0, and +1.0 over next three shots. The
three shots are taken in sequence when the shutter-release button is
pressed all the way.
Off (default
setting)
Exposure bracketing is not performed.
B Notes on Exposure Bracketing
• Exposure bracketing is not available in m (Manual) mode.
• When exposure compensation (A64) and ±0.3, ±0.7 or ±1.0 in Exposure bracketing are set
simultaneously, the combined exposure compensation values are applied.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A 75) for more information.
Reference Section
When exposure bracketing is enabled, the current setting is displayed during
shooting (A12). When Off is selected, an icon for the current setting is not
displayed.
E39
Shooting Menu (j, k, l or m Mode)
AF Area Mode
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M AF area mode
You can set how the focus area is determined for autofocus.
Option
a Face priority
w
Reference Section
E40
Auto
(default setting)
Description
The camera detects and focuses on
a face (see “Using Face Detection”
(A80) for more information).
If the camera detects multiple
faces, the camera focuses on the
25m 0s
face closest to the camera.
840
1/250 F5.6
When non-human subjects are
photographed, or a subject with
Focus area
which no face can be detected is
framed, AF area mode is set to
Auto. The camera automatically selects the focus areas (up to 9)
that contain the subject closest to the camera.
The camera automatically selects
the focus areas (up to 9) that
contain the subject closest to the
camera.
Press the shutter-release button
halfway to activate the focus area.
When the shutter-release button is
pressed halfway, the focus area
selected by the camera is
displayed on the monitor (up to 9
areas).
1/250
F5.6
Focus areas
Shooting Menu (j, k, l or m Mode)
Option
x Manual
The camera focuses at the center
of the frame.
The focus area is always displayed
at the center of the frame.
Two sizes are available for the
focus area.
25m 0s
1/250
F5.6
Focus area
s Subject tracking
Subject tracking begins once you
select a subject to be focused on,
and the focus area will move and
follow the subject. See “Using
Subject Tracking” (E43).
840
Reference Section
y Center (normal)
u Center (wide)
Description
Choose manually the focus position
from 99 areas in the screen. This
option is suited to situations in
which the intended subject is
relatively still and not positioned at
the center of the frame.
Rotate the multi selector or press
H, I, J or K to move the focus
Focus area
area to where the subject is, and
Selectable areas
take a picture.
• To adjust the following settings,
press the k button to temporarily cancel focus area selection,
and then adjust each setting.
- Flash mode, focus mode, self-timer or exposure
compensation
To return to the focus area selection screen, press the k
button again.
• At an Image size setting (A73) of H 3672×3672 , 81 focus
areas are available.
• When Metering (E33) is set to Matrix, the camera meters
by assigning greatest weight to the focus area.
End
1/250
F5.6
E41
Shooting Menu (j, k, l or m Mode)
Option
M Target finding AF
Description
When the camera detects the
main subject, it focuses on that
subject.
See “Using the Target Finding AF”
(A 79) for more information.
1/1200 F2.8
Focus areas
B Notes on AF Area Mode
• When the digital zoom is in effect, the camera focuses on the subject at the center of the frame
regardless of the applied AF area mode option.
• In some rare cases of shooting subjects for which autofocus does not perform as expected (A81),
the subject may not be in focus.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A75) for more information.
• If the camera does not focus on the desired subject when using a feature that selects and focuses
on the subject, such as Target finding AF, set AF area mode to Manual, Center (normal) or
Center (wide) and align the focus area with the desired subject. You can also try using focus lock
(A81).
Reference Section
E42
Shooting Menu (j, k, l or m Mode)
Using Subject Tracking
Rotate the mode dial to j, k, l, m or M M d button M j, k, l, m or M tab (A10)
M AF area mode
Choose this mode to shoot moving subjects. Subject tracking begins once you
select a subject to be focused on, and the focus area will move and follow the
subject.
1 Rotate the multi selector to select s Subject
tracking, and press the k button.
• Press the d button after changing the settings and
return to the shooting screen.
AF area mode
Face priority
Auto
Manual
Center (normal)
Center (wide)
Subject tracking
Target finding AF
2 Frame the subject at the center of the border,
and press the k button.
Start
1/250
F5.6
End
1/250
F5.6
1/250
F5.6
25m 0s
840
25m 0s
840
Reference Section
• The subject is registered.
• When the camera is unable to focus on the subject, the
border lights in red. Change the composition and try
again.
• Once the subject is registered, it is framed by a yellow
focus area display, and subject tracking begins.
• Press the k button to cancel the registration of the
subject.
• If the camera loses sight of the subject, the focus area
display disappears; register the subject again.
3 Press the shutter-release button all the way to
take the picture.
• If the camera focuses on the focus area when the
shutter-release button is pressed halfway, the focus
area display lights in green and the focus is locked.
• If the shutter-release button is pressed halfway while
the focus area is not displayed, the camera focuses on
the subject at the center of the frame.
E43
Movie Menu
C Notes on Frame rate and Bitrate
• The frame rate values indicate the number of frames per second. With a higher frame rate, the
movies become more seamless but the file size also becomes larger.
• The movie bitrate is the volume of movie data recorded per second. As a variable bitrate (VBR)
system has been adopted, the movie bitrate varies automatically according to the subject so that
more data is recorded per second for movies containing frequently moving subjects, thus
increasing movie file size.
HS Movie
When recorded movies are played back, the camera plays back the movies in slow
motion or fast motion.
See “Recording Movies in Slow Motion and Fast Motion (HS Movie)” (E51) for
more information.
h
u
i
w
Image size (pixels)
Aspect ratio
(horizontal: vertical)
Description
HS 480/4×
640 × 480
4:3
Movies are recorded at 4× speed faster
than normal speed and played back at
1/4-speed slow motion.
• Max. movie length: 7 min 15 s
(playback time: 29 min)
HS 720/2×
1280 × 720
16:9
Movies are recorded at 2× speed faster
than normal speed and played back at
1/2-speed slow motion.
• Max. movie length: 14 min 30 s
(playback time: 29 min)
HS 1080/0.5×
1920 × 1080
16:9
Movies are recorded at 0.5× speed of
normal speed and played back at 2×
speed fast motion.
• Max. movie length: 29 min (playback
time: 14 min 30 s)
Reference Section
j
x
Option
B Notes on HS Movie
• The sound is not recorded.
• Zoom position, focus, exposure and white balance are locked when movie recording starts.
B Note on HS Movie Recording and Special Effects Mode Setting
h/u HS 480/4× for Movie options cannot be selected when Soft or Nostalgic sepia is
selected for the special effects shooting mode.
Even if you select h/u HS 480/4× for other recording mode while Soft or Nostalgic sepia
is selected for the special effects shooting mode, i/w HS 720/2× is automatically selected
for Movie options when the mode dial is rotated to u.
E49
Movie Menu
Maximum Movie Length
The following table lists the approximate maximum movie length that can be
saved on a 4 GB memory card.
Note that the maximum movie length and file size that can be actually saved can
be different depending on the image composition and subject motion even when
the memory cards have the same capacity and movie options setting are the
same.
Also, the maximum movie length that can be saved may differ depending on the
make of the memory card.
Movie options (E48)
Maximum movie length*
(4GB)
Reference Section
d
o
1080P/30p
1080P/25p
25 min
30 min
e
p
1080/30p
1080/25p
40 min
45 min
n
q
1080/60i
1080/50i
25 min
30 min
f
r
720/30p
720/25p
1h
1 h 10 min
p
iFrame 540/30p
iFrame 540/25p
g
s
480/30p
480/25p
25 min
29 min
2 h 50 min
3 h 25 min
* The maximum movie recording time (maximum movie length for a single movie) is 4 GB or 29
minutes, even when there is sufficient free space on the memory card. The maximum movie length
for a single movie is displayed on the monitor during movie recording. If the camera becomes hot,
a movie recording in progress may be terminated even if there is more time available for recording.
• Only a short movie can be recorded in the internal memory. To record a movie,
use a memory card (Class 6 or higher is recommended). After removing the
memory card, check the indicator showing the maximum movie length that
can be stored in the internal memory (approx. 15 MB) on the screen during
recording.
C More Information
See “File and Folder Names” (E90) for more information.
E50
Movie Menu
Recording Movies in Slow Motion and Fast Motion (HS Movie)
When Movie options in the movie menu is set to HS movie (E49), HS (high
speed) movies can be recorded. Movies recorded using HS movie can be played
back in slow motion at 1/4 or 1/2 of normal playback speed, or played back in fast
motion at a speed two times faster than normal speed.
See “Recording Movies“ (A92) for more information on recording movies.
When a movie is recorded at h/u HS 480/4×:
Movies are recorded at a speed with a four times higher frame rate than normal speed (maximum
movie length: 7 minutes and 15 seconds).
Movies are played back in slow motion that takes four times longer than normal speed.
Recording
15 s
Playback
1 min
When a movie is recorded at j/x HS 1080/0.5×:
Movies are recorded at half (0.5×) the frame rate of normal speed (maximum movie length: 29
minutes).
Movies are played back in fast motion at a speed two times faster than normal speed.
Recording
1 min
Autofocus Mode
Display the shooting screen M d button M e (Movie) tab (A10) M Autofocus mode
Reference Section
Playback
2 min
Select how the camera focuses when recording normal speed movies (E48).
Option
A
Description
Lock on the focus when the b (e movie-record) button is
Single AF
pressed to start recording. Select this option when the distance
(default setting)
between the camera and the subject remains fairly consistent.
B Full-time AF
The camera focuses continuously during movie recording.
Suitable for shooting when the distance between the camera and
subject changes. The operation sound when the camera focuses
may be recorded. Setting to Single AF is recommended if the
sound is noticeable.
E51
The Playback Menu
For more information about image editing functions; (Quick retouch,
D-Lighting, Skin softening, Filter effects and Small picture), see “Editing Still
Images“ (E10).
a Print Order (Creating a DPOF Print Order)
Press the c button (Playback mode) M d button (A10) M a Print order
If you choose to use one of the following methods to print pictures that are stored
on a memory card, the pictures to print and the number of copies can be set in
advance on the memory card.
• Printing with a DPOF-compatible (F22) printer that is equipped with a card
slot.
• Ordering the prints to a digital photo lab that has a DPOF service.
• Printing by connecting the camera to a PictBridge-compatible (F22) printer
(E19). (When the memory card is removed from the camera, the print order
can also be performed for the pictures stored on the internal memory.)
1 Use the multi selector to choose Select
images, and press the k button.
Reference Section
2 Choose the pictures (up to a maximum of 99)
E52
and number of copies (up to 9 per picture).
Print order
Select images
Delete print order
Print selection
1
1
2
3
• Rotate the multi selector or press J or K to choose
the pictures, and press H or I to set the number of
copies for each.
• Pictures selected for printing can be recognized by the
Back
check mark icon and the numeral indicating the
number of copies to be printed. If no copies have been specified for pictures, the
selection is canceled.
• Rotate the zoom control toward g (i) to switch to full-frame playback mode, or f
(h) to switch to 12-thumbnail display.
• Press the k button when setting is complete.
The Playback Menu
3 Choose whether or not to also print shooting
Print order
date and shooting information.
• Choose Date and press the k button to print the
Done
shooting date on all pictures in the print order.
• Choose Info and press the k button to print shooting
Date
Info
information (shutter speed and aperture value) on all
pictures in the print order.
• Choose Done and press the k button to complete the print order.
• Pictures with the print orders are recognized by the w icon displayed in playback
mode (A14).
B Notes on Printing Shooting Date and Shooting Information
When the Date and Info options are enabled in the print order menu, shooting date and shooting
information can be printed on pictures when a DPOF-compatible (F22) printer which supports
printing of shooting date and shooting information is used.
• Shooting information cannot be printed when the camera is connected directly to a printer, via
the included USB cable, for DPOF printing (E22).
• Date and Info are reset each time the Print order menu is displayed.
• The date printed on the picture is the same as those set on the
camera when the picture was taken. The date printed using this
option is not affected if the camera’s Time zone and date setting
is changed from the setup menu after the pictures are taken.
In step 1 of the print order procedure (E52), choose Delete print order and press the k button
to delete the print orders for all pictures.
C Print Date
Reference Section
15/05/2013
C Deleting All Print Orders
The shooting date and time can be imprinted on pictures at the time of shooting by using Print
date (E68) in the setup menu. This information can be printed even from printers that do not
support printing of the date. Only the date of print date on the pictures are printed, even if Print
order is enabled with the date selected in the print order screen.
C More Information
See “Printing Images of Size 1:1” (A74) for more information.
E53
The Playback Menu
b Slide Show
Press the c button (Playback mode) M d button (A10) M b Slide show
View pictures stored in the internal memory or on a memory card in an automatic
slide show.
1 Use the multi selector to choose Start, and
press the k button.
• To change the interval between pictures, choose
Frame intvl, and press the k button, and then select
the desired interval time before choosing Start.
• To repeat the slide show automatically, enable Loop
and press the k button before choosing Start. The
check mark (w) is added to the loop option when
enabled.
Slide show
Pause
Start
Frame intvl
Loop
3s
2 The slide show begins.
• Press the multi selector K to display the next picture, or
J to display the previous picture. Press and hold K to
fast forward, or J to rewind.
• To exit partway or pause, press the k button.
Reference Section
3 Choose End or Restart.
• After the last frame is played back or during playback
pause, the screen shown on the right is displayed.
Choose G and press the k button to return to step 1.
Choose F to play the slide show again.
B Notes on Slide Shows
• Only the first frame of movies (A97) included in slide shows is displayed.
• For sequences (E8) whose sequence display options are set to Key picture only, only the key
picture is displayed.
• Images captured using Easy panorama are displayed in full-frame when played in a slide show.
They do not scroll.
• Slide shows play for a maximum of about 30 minutes (E73).
E54
The Playback Menu
d Protect
Press the c button (Playback mode) M d button (A10) M d Protect
Protect selected pictures from accidental deletion.
In the image selection screen, choose a picture and set or cancel protection. See
“Using the Screen for Selecting Images” (A86) for more information.
Note, however, that formatting the camera’s internal memory or the memory card
(E74) permanently erases the protected files.
Protected pictures are recognized by the s icon in playback mode (A14).
f Rotate Image
Press the c button (Playback mode) M d button (A10) M f Rotate image
Change the orientation of pictures played back on the camera’s monitor after
shooting. Still pictures can be rotated 90° clockwise or counterclockwise.
Pictures that were recorded in the “tall” orientation can be rotated up to 180° in
either direction.
Select a picture in the image selection screen (A86) to display the rotate image
screen. Rotate the multi selector, or press J or K to rotate the picture 90°.
Back
Rotate image
Rotate
Rotated 90°
counterclockwise
Back
Rotate image
Rotate
Back
Reference Section
Rotate image
Rotate
Rotated 90°
clockwise
Press the k button to set the orientation displayed and save the orientation data
with the picture.
B Notes on Image Rotation
• Images captured using 3D photography cannot be rotated.
• While only the key picture of a sequence is displayed, images cannot be rotated. Apply the setting
after displaying individual images (E8, E58).
E55
The Playback Menu
E Voice Memo
Press the c button (Playback mode) M Select a picture M d button (A10)
M E Voice memo
Use the camera’s microphone to record voice memos for pictures.
• The recording screen is displayed for a picture without voice memo, while the voice memo
playback screen is displayed for a picture with voice memo (a picture marked with p in
full-frame playback mode).
Recording Voice Memos
• Voice memo can be recorded for up to about 20 seconds
while the k button is pressed.
• Do not touch the microphone during recording.
• During recording, o and p flash on the monitor.
• When recording ends, the voice memo playback screen is
displayed.
17s
Playing Voice Memos
• Press the k button to play back a voice memo. To end
playback, press the k button again.
• Rotate the zoom control toward g or f during playback to
adjust playback volume.
• Press the multi selector J before or after playing a voice
memo to return to the playback menu. Press the d button
to exit the playback menu.
Back
12s
Reference Section
Deleting Voice Memos
Press the l button on the voice memo playback screen.
Press the multi selector H or I to select Yes and press
the k button to delete only the voice memo.
File will be deleted. OK?
Yes
No
B Notes on Voice Memos
• When a picture with a voice memo attached is deleted, both the picture and its voice memo are
deleted.
• Voice memos cannot be recorded for a picture that already has a voice memo attached to it. The
current voice memo must be deleted before a new voice memo can be recorded.
• Voice memos cannot be attached to pictures taken with cameras other than the COOLPIX P520.
• Voice memos of the images with the Protect setting (E55) cannot be deleted.
C More Information
See “File and Folder Names” (E90) for more information.
E56
The Playback Menu
h Copy (Copy Between Internal Memory and Memory
Card)
Press the c button (Playback mode) M d button (A10) M h Copy
Copy pictures or movies between the internal memory and a memory card.
1 Use the multi selector to select an option
from the copy screen, and press the k
button.
Copy
Camera to card
Card to camera
• Camera to card: Copy pictures from the internal
memory to the memory card.
• Card to camera: Copy pictures from the memory card
to the internal memory.
2 Select a copy option and press the k button.
Camera to card
B Notes on Copying Pictures
• JPEG-, MOV-, WAV-, and MPO-format files can be copied. Files recorded in any other format cannot
be copied.
• Voice memo (E56) attached to pictures and Protect setting (E55) are also copied with the
pictures.
• Pictures recorded with another make or model of camera or that have been modified on a
computer cannot be copied.
• Print order settings(E52) are not copied with the pictures.
• If Sequence display options (E58) is set to Key picture only and a picture in the sequence is
selected and the k button is pressed to display individual pictures (E8), only Card to camera
image copy is available.
Reference Section
Selected images
• Selected images: Copy pictures selected from the
All images
image selection screen (A86). If a sequence for which
only a key picture is displayed is selected (E8), all
pictures in the displayed sequence are copied.
• All images: Copy all pictures. If a picture in a sequence
is selected, this option is not displayed.
• Current sequence: This option is displayed when a picture in a sequence has been
selected before displaying the playback menu. All pictures in the current sequence
are copied.
E57
The Playback Menu
C Message: “Memory contains no images.”
If there are no pictures stored on the memory card when playback mode is selected, the message,
Memory contains no images., is displayed. Press the d button and select Copy from the
playback menu to copy the pictures stored in the camera's internal memory to the memory card.
C More Information
See “File and Folder Names” (E90) for more information.
C Sequence Display Options
Press the c button (Playback mode) M d button (A10) M C Sequence display
options
Choose the method used to display a series of pictures shot continuously
(sequence, E8) when viewing them in full-frame playback mode (A32) or in
thumbnail playback mode (A83).
Settings are applied to all sequences, and the setting is saved in the camera’s
memory even if the camera is turned off.
Option
Description
Individual pictures Each picture in a sequence is displayed.
Reference Section
Key picture only
(default setting)
Return a sequence in which pictures are displayed individually to the
key picture only display.
x Choose Key Picture
Press the c button (Playback mode) M Select the desired sequence M d button
(A10) M x Choose key picture
When Sequence display options is set to Key picture only, the key picture
displayed in full-frame playback mode (A32) or thumbnail playback mode
(A83) can be set for each sequence of pictures.
• When changing this setting, before pressing the d button, first select the
desired sequence using full-frame playback mode or thumbnail playback mode.
• When the key picture selection screen is displayed, select a picture. See “Using
the Screen for Selecting Images” (A86) for more information.
E58
GPS Options Menu
GPS Options
Press the d button M z (GPS options) tab (A10) M GPS options
Option
Description
Record GPS data
When set to On, signals are being received from the GPS satellites,
and positioning starts (A98).
• The default setting is Off.
Update A-GPS file
A memory card is used to update the A-GPS (assist GPS) file. Using the
latest A-GPS file can shorten the time needed for tracking of the
position information.
Updating the A-GPS File
Download the latest A-GPS file from the website below, and use it to update the
file.
http://nikonimglib.com/agps2/index.html
• The A-GPS file for the COOLPIX P520 is only available from the website above.
• To update the A-GPS file, set Record GPS data to Off. When On is selected, the
A-GPS file cannot be updated.
“NCFL” folder of the memory card.
• The “NCFL” folder is located directly under the memory card root directory. If the
memory card does not have “NCFL” folder, create a new folder.
3 Insert the memory card containing the copied file into the camera.
4 Turn on the camera.
5 Press the d button to display the GPS options menu, and use the
Reference Section
1 Download the latest A-GPS file to the computer from the website.
2 Use a card reader or other device to copy the downloaded file to the
multi selector to select GPS options.
6 Select Update A-GPS file, and update the file.
• About 2 minutes are needed to update the A-GPS file.
E59
GPS Options Menu
B Notes on Updating A-GPS File
• The A-GPS file is disabled when a position is determined for the first time after the camera is
purchased. The A-GPS file becomes active from the second operation for determining a location.
• The validity period of the A-GPS file can be checked on the update screen. If the validity period has
expired, it is displayed in gray.
• Once the validity period of the A-GPS file has expired, tracking of the position information will not
become faster. Updating of the A-GPS file before using the GPS feature is recommended.
Points of Interest (POI) (Recording and Displaying Location
Name Information)
Press the d button M z (GPS options) tab (A10) M Points of interest (POI)
This shows how to set the POI (point of interest, location name information).
Option
Description
Reference Section
Embed POI
When set to On, the location name information is recorded on the
pictures to be shot.
• The default setting is Off.
• The location name information can be recorded on a still image or
movie.
Display POI
When set to On, the location name information is displayed on the
shooting and playback screens (A12, 14).
• If Embed POI was set to On when a picture was taken, the location
name information for the picture is displayed on the playback screen.
• The default setting is Off.
Level of detail
Set the display level of the location name information. A higher
display level shows more detailed regional information.
• When set to level 1: country names are displayed.
• When set to levels 2 to 5: the information displayed varies
depending on the country.
• When set to level 6: landmark names (facilities) are displayed.
Edit POI
If Update POI is selected during playback mode, the location name
information recorded on the image can be changed. Select the image
you want to edit, before pressing the d button.
• When level 6 is selected, press the multi selector J or K to change
the landmark name.
• To change the POI information level, press the multi selector H or I.
If Remove POI is selected, the location name information recorded
on the image is deleted.
C POI Display
• If there is no location name information in the display level that was set, “---” is displayed.
• The location name information (Point of Interest: POI) function is not provided for the COOLPIX
P520 sold in China and the Republic of Korea.
E60
GPS Options Menu
Create Log (Record the Log of Moving Information)
Press the d button M z (GPS options) tab (A10) M Create log
When log recording starts, the measured moving information is recorded until a
preset time has elapsed at the interval set for Log interval.
• It is not possible to use the log data by simply recording it. To use the data,
select End log and save it to a memory card.
1 Use the multi selector to select Start log, and
press the k button.
• Before selecting Start log, select Log interval and
press the k button to select the intervals of log
recording. The default setting is 15 s.
2 Select the duration that the log will be
recorded, and press the k button.
• Log recording starts.
• The log data is recorded at the interval set for the Log
interval until the preset time is reached.
• D is displayed on the screen during log recording
(A12).
log in Create log in the GPS options menu,
and press the k button.
4 Select Save log, and press the k button.
• The log data is saved to a memory card.
Start log
Log interval
End log
Start log
Log data for next 6 hrs
Log data for next 12 hrs
Log data for next 24 hrs
Create log
Start log
Log interval
End log
Reference Section
3 When log recording is completed, select End
Create log
End log
Save log
Erase log
E61
GPS Options Menu
B Notes on Log Recording
• If the date and time are not set, the log cannot be recorded.
• Use a fully charged battery to prevent the camera from turning off during log recording. When the
battery power becomes exhausted, log recording ends.
• Log recording ends due to the operations below even when there is time remaining for log
recording.
- The USB cable is connected.
- Insert a memory card.
- The battery is removed.
- Record GPS data in GPS options is set to Off (same as when Reset all is performed).
- The setting of the internal clock (time zone or date and time) is changed.
• Even when the camera is turned off, log recording is continuously performed until the preset time
has elapsed if there is still time remaining for log recording.
• The log data is temporarily stored in the camera. New logs cannot be recorded if the log data
remains in the camera. After recording log data, save it to a memory card.
• See “GPS Log Data Saved on Memory Cards” (E91) for more information.
C To Erase Log Data
• To erase the log data that is temporarily stored in the camera, select Erase log in step 4.
• To erase the log data that is stored on the memory card, press the l button in View log (E63).
Reference Section
E62
GPS Options Menu
View Log
Press the d button M z (GPS options) tab (A10) M View log
Check or erase the log data stored on the memory card
using Create log (E61).
• See “GPS Log Data Saved on Memory Cards” (E91)
for more information.
View log
2013/05/26[2]
2013/05/26 [1]
2013/05/20
2013/05/18
2013/05/15
To Erase Log Data
Press the l button to select either function.
• Selected log: The selected log data is erased.
• All logs: All log data stored on the memory card is erased.
C Log Data
Log data is NMEA format-compliant. However, display in any NMEA format-compliant software or on
any NMEA format-compliant camera is not guaranteed.
Synchronize
Signals from the GPS satellites are used to set the date and time of the camera’s
internal clock (only when Record GPS data in GPS options of the GPS options
menu is set to On). Check the positioning status before starting synchronize.
Reference Section
Press the d button M z (GPS options) tab (A10) M Synchronize
B Notes on Synchronize
• Date and time adjustment by Synchronize is set according to the time zone set in Time zone
and date (A24, E65) of the setup menu. Check the time zone before setting Synchronize.
• The date and time set using Synchronize is not as accurate as radio clocks. Use Time zone and
date in the setup menu to set the time if it is not accurate in Synchronize.
E63
The Setup Menu
Welcome Screen
Press the d button M z tab (A10) M Welcome screen
Select whether or not to display the welcome screen on the monitor when the
camera is turned on.
Option
None
(default setting)
COOLPIX
Select an image
Reference Section
E64
Description
Display the shooting or playback screen without displaying the
welcome screen.
Display the welcome screen before displaying the shooting or
playback screen.
Select a picture taken to display as the welcome screen. Display the
image selection screen, choose an image (A86), and press the k
button to register it.
• Because the selected image is stored in the camera, the image
appears in the welcome screen even if the original image is deleted.
• The following pictures cannot be registered.
- Pictures taken with Image size (A73) of s 4864×2736,
O 1920×1080, I 4896×3264 or H 3672×3672
- Pictures reduced to 320 × 240 or smaller using small picture
editing (E15) or crop (E16)
- Pictures taken with Easy panorama
- Pictures taken using 3D photography
The Setup Menu
Time Zone and Date
Press the d button M z tab (A10) M Time zone and date
Option
Date and time
Date format
Time zone
Description
Set the camera clock to the current date and time.
Use the multi selector to set the date
Date and time
and time.
D
M
Y
• Choose an item: Press K or J
15
05
2013
(selected in the following order: D
(day) ➝ M (month) ➝ Y (year) ➝
10
15
hour ➝ minute).
• Set the contents: Press H or I. Date
Edit
and time can also be set by rotating
the multi selector or command dial.
• Finish setting: Choose minute and press the k button or K.
Choose the order in which the day, month, and year are displayed
(Year/Month/Day, Month/Day/Year or Day/Month/Year).
w Home time zone can be specified and daylight saving can be
enabled or disabled.
When x travel destination is registered, the time difference from the
w home time zone is automatically calculated and the local date and
time are recorded. Useful when traveling.
Reference Section
E65
The Setup Menu
Setting the Travel Destination Time Zone
1 Use the multi selector to choose Time zone,
and press the k button.
• The Time zone screen is displayed.
Time zone and date
15/05/2013 15:30
London, Casablanca
Date and time
Date format
Time zone
2 Choose x Travel destination and press the
k button.
• The date and time displayed on the monitor change
according to the region currently selected.
3 Press K.
Time zone
Tokyo, Seoul
15/05/2013 23:30
Home time zone
Travel destination
Time zone
• The time zone selection screen is displayed.
Tokyo, Seoul
15/05/2013 23:30
Home time zone
Travel destination
Reference Section
4 Press J or K to choose the travel destination
(Time zone).
• The time difference between home and the travel
destination is displayed.
• In regions where daylight saving time applies, press H
to enable the daylight saving time function. When this
function is set to on, the W icon will be displayed at
the top of the monitor and the camera clock advances
one hour. To disable the daylight saving time function,
press I.
• If the time difference cannot be selected, set the
correct time using Date and time.
• Press the k button to register the travel destination
time zone.
• While the travel destination time zone is selected, the
Z icon is displayed on the monitor when the camera
is in shooting mode.
Time difference
10:30
-5:00
New York
Toronto
Lima
Back
Time zone
New York, Toronto, Lima
15/05/2013 10:30
Home time zone
Travel destination
C w Home Time Zone
• To switch to the home time zone, choose w Home time zone in step 2 and press the k button.
• To change the home time zone, choose w Home time zone in step 2 and perform the same
procedure as for x Travel destination to set the home time zone.
E66
The Setup Menu
Monitor Settings
Press the d button M z tab (A10) M Monitor settings
Option
Description
Image review
On (default setting): Picture is displayed on the monitor immediately
after shooting and the monitor display returns to shooting screen.
Off: Picture is not displayed immediately after shooting.
Brightness
Choose from 5 settings to select the monitor brightness. The default
setting is 3.
View/hide framing
grid
On: A boxed guide for framing is displayed.
Off (default setting): A boxed guide for framing is not displayed.
View/hide
histograms
On: Histograms are displayed in the shooting mode even when the
exposure compensation is not being set (A13, 64).
Off (default setting): Histograms are not displayed.
B Note on View/Hide Framing Grid
Framing grid is not displayed in the following situation.
• When the enlarged center of the picture is displayed in E (manual focus)
B Notes on View/Hide Histograms
Reference Section
Histograms are not displayed in the following situations.
• When recording a movie
• When the enlarged center of the picture is displayed in E (manual focus)
• When the flash mode, self-timer or focus mode menu is displayed
E67
The Setup Menu
Print Date (Imprinting Date and Time on Pictures)
Press the d button M z tab (A10) M Print date
The shooting date and time can be imprinted on
pictures at the time of shooting. This information can be
printed even from printers that do not support printing
of the date (E53).
15/05/2013
Option
Description
f
Date
The date is imprinted on pictures.
S
Date and time
The date and time are imprinted on pictures.
k Off (default setting)
The date and time are not imprinted on pictures.
The icon for the current setting other than Off is displayed on the monitor (A12).
B Notes on Print Date
Reference Section
• Imprinted date and time cannot be deleted from the image, nor can date and time be imprinted
after the picture has been taken.
• Date and time cannot be imprinted in the following situations.
- When the scene mode is set to Easy panorama, Panorama assist or 3D photography
- When Pre-shooting cache, Continuous H: 120 fps or Continuous H: 60 fps is selected for
Continuous (E34)
- During movie recording
• Dates imprinted with an Image size (A73) setting of f 640×480 may be difficult to read. Set
the image size to B 1600×1200 or higher.
• The date is recorded using the format selected in the setup menu’s Time zone and date option
(A24, E65).
C Print Date and Print Order
When printing from DPOF-compatible printers which support printing of shooting date and
shooting information, the date and information can be printed on pictures without the date and
time being imprinted on them with Print date, using options in the Print order menu (E52).
E68
The Setup Menu
Vibration Reduction
Press the d button M z tab (A10) M Vibration reduction
Compensate camera shake. Camera shake is also compensated when recording
movies as well as when shooting still images.
Option
Description
g
Compensate camera shake that commonly occurs when shooting at
the telephoto zoom position or slow shutter speed. The camera
automatically detects the panning direction and only compensates
Normal
for vibration caused by camera shake.
(default setting)
When the camera is panned horizontally, for example, vibration
reduction only reduces vertical shake. If the camera is panned
vertically, vibration reduction only compensates for horizontal shake.
Z
Active
k Off
Camera shake is automatically compensated during shooting if a
comparatively large camera shake is likely to occur when
shooting from a car or under poor foothold conditions.
Vibration reduction is not enabled.
• When using a tripod to stabilize the camera, set vibration reduction to Off.
The icon for the current setting other than Off is displayed on the monitor (A12).
B Notes on Vibration Reduction
Reference Section
• Immediately after the power is turned on or the camera enters shooting mode from playback
mode, wait until the monitor screen stabilizes before shooting.
• Due to the characteristics of the vibration reduction function, images displayed on the monitor
screen immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When the X (Night landscape) or Night portrait scene mode is set to Tripod, the camera shake
is not compensated even if Vibration reduction is set to Normal or Active.
E69
The Setup Menu
Motion Detection
Press the d button M z tab (A10) M Motion detection
Enable motion detection to reduce the effects of camera shake and subject
movement when shooting still pictures.
Option
U
Description
If the camera detects the movement of the subject or camera
shake, the ISO sensitivity is raised and the shutter speed is
increased to reduce their effects.
However, motion detection does not function in the following
situations.
• When the flash fires
Auto
• In the following scene modes: X (Night landscape), c
(default setting)
(Landscape), R (Backlighting), Sports, Night portrait, Noise
reduction burst in Close-up, Fireworks show, Easy
panorama in Panorama, Pet portrait, 3D photography
• When u (special effects) is set to High ISO
monochrome
• When shooting mode is j, k, l, m or M
k Off
Motion detection is not enabled.
Reference Section
When Auto is selected, an icon for this setting is displayed on the monitor (A12).
The motion detection icon lights in green when the camera detects any vibration
and increases the shutter speed.
B Notes on Motion Detection
• Motion detection may be unable to completely reduce effects of camera shake and subject
movement in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The pictures taken may become grainy.
E70
The Setup Menu
AF Assist
Press the d button M z tab (A10) M AF assist
Enable or disable the AF-assist illuminator that assists the autofocus when the
lighting is dim.
Option
Description
Auto (default setting)
AF-assist illuminator lights automatically if the lighting is dim.
The illuminator has a range of about 4.1 m (13 ft) at the
maximum wide-angle position and about 2.2 m (7 ft 2 in.) at the
maximum telephoto position.
• For some focus areas and scene modes such as Museum
(A42) and Pet portrait (A44), AF-assist illuminator may
not turn on even if Auto is set.
Off
AF-assist illuminator does not light. The camera may be unable
to focus if lighting is dim.
Digital Zoom
Press the d button M z tab (A10) M Digital zoom
Enable or disable the digital zoom.
Description
On (default setting)
When the camera is zoomed in to the maximum optical zoom
position, rotating the zoom control toward g (i) triggers the
digital zoom (A29).
Off
The digital zoom is not activated.
Reference Section
Option
B Notes on Digital Zoom
• When the digital zoom is used, the focus will be at the center of the frame.
• The digital zoom cannot be used when R (Backlighting) (HDR setting is other than Off), Scene
auto selector, Portrait, Night portrait, Easy panorama in Panorama, Pet portrait or 3D
photography is selected in scene mode.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A75) for more information.
• When the digital zoom is in effect, Metering (E33) is set to Center-weighted or Spot
depending on the magnification of an enlargement.
E71
The Setup Menu
Assign Side Zoom Control
Press the d button M z tab (A10) M Assign side zoom control
Choose the function to be performed during shooting when the side zoom
control is used.
Description
Zoom (default setting)
When shooting, use the side zoom control (A29) to adjust the
zoom.
Manual focus
When the focus mode is set to E (manual focus), use the side
zoom control to focus (E2).
• Use the side zoom control in the direction of g to focus on
distant subjects.
• Use the side zoom control in the direction of f to focus on
near subjects.
Snap-back zoom
This is convenient when shooting at the telephoto position,
when it is more difficult to keep subjects in focus. Use the side
zoom control in the direction of f to zoom a specific increment
from the current zoom position toward the f side. Use it in the
direction of f again to move the zoom position further toward
f side. Use it in the direction of g to return to the original zoom
position, before the side zoom control was used.
• When using the digital zoom, use the side zoom control in the
direction of f to move to the telephoto end of the optical
zoom.
• If you perform any operation other than the side zoom
control, the zoom is not returned to the zoom position before
the operation.
• Snap-back zoom is not available during movie recording.
Reference Section
Option
E72
The Setup Menu
Sound Settings
Press the d button M z tab (A10) M Sound settings
Adjust the following sound settings.
Option
Description
Button sound
Set the following all sound settings to On (default setting) or
Off.
• Setting beep (beep sounds once when the settings are
completed)
• Focus beep (beep sounds twice when the camera focuses on
the subject)
• Error beep (beep sounds three times when an error is
detected)
• Start-up sounds to be emitted when the camera is turned on.
(No sound is emitted when Welcome screen is set to None.)
Shutter sound
Choose whether to set the shutter sound to On (default setting)
or Off.
B Notes on Sound Settings
• In Pet portrait scene mode, even when On is set, the button sound and shutter sound are disabled.
• Even when On is set, the shutter sound is disabled during movie recording.
• Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination“ (A75) for more information.
Press the d button M z tab (A10) M Auto off
If no operations are performed for a certain period while the camera is on, the
monitor is turned off to save power and the camera enters standby mode (A23).
In this menu, set the time before the camera enters standby mode.
Choose from 30 s, 1 min (default setting), 5 min and 30 min.
Reference Section
Auto Off
C Auto Off Setting
• In the following situations, the time taken for the camera to enter standby mode is fixed.
- When menus are displayed: 3 minutes (when auto off is set to 30 s or 1 min.)
- During slideshow playback: maximum of 30 minutes
- When the AC Adapter EH-62A is connected: 30 minutes
• The camera does not enter standby mode when transferring images using the Eye-Fi card.
E73
The Setup Menu
Format Memory/Format Card
Press the d button M z tab (A10) M Format memory/Format card
Format the internal memory or a memory card.
Formatting permanently deletes all data in the internal memory or
memory card. The deleted data cannot be recovered. Be sure to transfer
important pictures to a computer before formatting.
Formatting the Internal Memory
To format the internal memory, remove the memory card from the camera. The
Format memory option is displayed on the setup menu.
Formatting Memory Cards
When a memory card is inserted in the camera, the memory card can be formatted.
The Format card option is displayed on the setup menu.
B Formatting Internal Memory and Memory card
• Do not turn off the camera or open the battery-chamber/memory card slot cover during
formatting.
• The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera.
Language
Press the d button M z tab (A10) M Language
Reference Section
Choose one of 34 languages for displaying the camera menus and messages.
Czech
Danish
German
(default
setting)
Spanish
Greek
French
Indonesian
Italian
Hungarian
Dutch
E74
Norwegian
Polish
Brazilian
Portuguese
Portuguese
Russian
Romanian
Finnish
Swedish
Vietnamese
Turkish
Ukrainian
Arabic
Bengali
Simplified
Chinese
Traditional
Chinese
Hindi
Japanese
Korean
Marathi
Persian
Tamil
Telugu
Thai
The Setup Menu
TV Settings
Press the d button M z tab (A10) M TV settings
Adjust the settings for connecting to a TV.
Option
Description
Video mode
Select the analog video output system from NTSC or PAL in
accordance with your TV.
• The available frame rates in Movie options (E48) change
depending on the setting of the video mode.
HDMI
Select a picture resolution for HDMI output from Auto (default
setting), 480p, 720p or 1080i. When Auto is set, the output
resolution that is best suited to the connected TV is selected
automatically from 480p, 720p or 1080i.
HDMI device control
Select whether or not the camera receives signals from a TV
when a TV that conforms to the HDMI-CEC standard is
connected with an HDMI cable. When set to On (default setting),
the television remote control can be used to operate the camera
during playback.
See “Using the TV’s Remote Control (HDMI Device Control)”
(E18) for more information.
HDMI 3D output
Set the method used to output 3D images to HDMI devices.
Select On (default setting) to three-dimensionally play back 3D
images taken with this camera on a TV or monitor that is
connected via HDMI.
Reference Section
E75
The Setup Menu
Charge by Computer
Press the d button M z tab (A10) M Charge by computer
Select whether or not the battery inserted into the camera is charged when the
camera is connected to a computer via the USB cable (A87).
Option
Description
Auto (default setting)
When the camera is connected to a computer that is running,
the battery inserted into the camera is automatically charged
using power supplied by the computer.
Off
The battery inserted into the camera is not charged when the
camera is connected to a computer.
B Notes on Connecting the Camera to a Printer
• The battery cannot be charged with connection to a printer, even if the printer complies with the
PictBridge standard.
• When Auto is selected for Charge by computer, it may be impossible to print images with direct
connection of the camera to some printers. If the PictBridge startup screen is not displayed on the
monitor after the camera is connected to a printer and turned on, turn the camera off and
disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the
printer.
B Notes on Charging with Connection to a Computer
Reference Section
• The battery cannot be charged, nor can data be transferred, when the camera is connected to a
computer before the camera’s display language and date and time have been set (A24). If the
camera’s clock battery (A25) has been exhausted, the date and time must be reset before the
battery can be charged or images can be transferred with connection to a computer. In this case,
use the Charging AC Adapter EH-69P (A18) to charge the battery and then set the camera’s date
and time.
• If the camera is turned off, charging will also stop.
• If the computer enters sleep mode while charging, charging will stop and the camera may be
turned off.
• When disconnecting the camera from the computer, turn the camera off and then disconnect the
USB cable.
• It may take longer to charge the battery with connection to a computer than with charging using
the Charging AC Adapter EH-69P. Charging time increases when images are transferred while the
battery is charging.
• When the camera is connected to a computer, an application installed on the computer, such as
Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of
charging the battery, exit the application.
• The camera turns off automatically if there is no communication with the computer for 30 minutes
after the battery has finished charging.
• Depending upon computer specifications, settings, and power supply and allocation, it may be
impossible to charge the battery using a computer connection while it is inserted into the camera.
E76
The Setup Menu
C The Charge Lamp
The following chart explains charge lamp status when the camera is connected to a computer.
Option
Description
Flashes slowly (green)
Battery charging.
Off
Battery not charging.
If the charge lamp changes from slow flashing (green) to off
while the power-on lamp is lit, charging is complete.
Flashes quickly (green)
• The ambient temperature is not suited to charging. Charge
the battery indoors with an ambient temperature of 5°C to
35°C (41°F to 95°F).
• The USB cable is not connected correctly, or the battery is
faulty. Make sure the USB cable is connected correctly and
replace the battery if necessary.
• The computer is in sleep mode and is not supplying power.
Wake up the computer.
• The battery cannot be charged because the computer cannot
supply power to the camera, due to the computer’s settings or
its specifications.
Reference Section
E77
The Setup Menu
Toggle Av/Tv Selection
Press the d button M z tab (A10) M Toggle Av/Tv selection
Switch the method for setting the flexible program, shutter speed or aperture
value.
• This feature can be used when shooting mode is set to j, k, l, m or M.
Option
Description
Do not toggle selection Use the command dial to set the flexible program or shutter
(default setting)
speed, and the multi selector to set the aperture value.
Toggle selection
Use the multi selector to set the flexible program or shutter
speed, and the command dial to set the aperture value.
Reset File Numbering
Press the d button M z tab (A10) M Reset file numbering
When Yes is selected, the sequential numbering of file numbers is reset (E90).
After resetting, a new folder is created and the file number for the next picture
taken starts from “0001.”
Reference Section
B Note on Reset File Numbering
Reset file numbering cannot be applied when the folder number reaches 999 and there are
images in the folder. Insert a new memory card, or format the internal memory/memory card
(E74).
E78
The Setup Menu
Blink Warning
Press the d button M z tab (A10) M Blink warning
Choose whether or not blinking eyes are detected when using face detection
(A80) in the following shooting modes.
• In the following scene modes: Scene auto selector (A39), Portrait (A39)
or Night portrait (when Tripod is selected) (A40)
• Shooting modes j, k, l, m, M (when Face priority (E40) is selected for AF
area mode)
Option
Description
On
The Did someone blink? screen is displayed on the monitor if
the camera detects that a human subject may have closed the
eyes immediately after taking a picture using face detection. The
face of the human subject that may have closed his/her eyes is
framed by a yellow border. You can check the picture taken and
determine if you need to take the picture again.
Off (default setting)
The camera does not detect blinks.
The Did someone blink? Screen
Reference Section
• To zoom in the face for which blinking was detected,
Did someone blink?
rotate the zoom control toward g (i). To return to
full-frame playback mode, rotate the zoom control
toward f (h).
• When the camera detects that one or more human
Exit
subjects have closed their eyes, press J or K during
playback zoom to display other faces.
• Press the l button to delete the picture taken.
• Press the k button or the shutter-release button to return to shooting mode.
• If no operations are performed for a few seconds, the screen automatically
returns to the shooting screen.
B Note on Blink Warning
Some features cannot be used in combination with other menu settings. See “Features Not
Available in Combination” (A75) for more information.
E79
The Setup Menu
Eye-Fi Upload
Press the d button M z tab (A10) M Eye-Fi upload
Option
Description
b
Enable
(default setting)
Upload images created by the camera to a preselected
destination when an Eye-Fi card is in the camera.
c
Disable
Images will not be uploaded.
B Notes on Eye-Fi Cards
• Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
• Remove the Eye-Fi card from the camera in a place where the use of radio waves is prohibited.
Signals may be transmitted even if Disable is selected.
• Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
• The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.
• The camera is not compatible with the endless memory function. When it is set on a computer,
disable the function. If the endless memory function is enabled, the number of pictures taken may
not be displayed correctly.
• Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
• Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.
C Eye-Fi Communication Indicator
Reference Section
The communication status of the Eye-Fi card in the camera can be confirmed on the monitor
(A12).
• w: Eye-Fi upload is set to Disable.
• x (lights): Eye-Fi upload enabled; waiting to begin upload.
• x (flashes): Eye-Fi upload enabled; uploading data.
• z: An error occurred. The camera cannot control the Eye-Fi card.
Reverse Indicators
Press the d button M z tab (A10) M Reverse indicators
Change the +/- display direction of the exposure indicator (A51) displayed when
shooting mode is m.
The + side of the indicator is up and - side is down in the default setting.
E80
The Setup Menu
Reset All
Press the d button M z tab (A10) M Reset all
When Reset is selected, the camera settings are restored to the default values.
Pop-up Menu
Option
Default value
Flash mode (A56)
Auto
Self-timer (A59)/
Smile timer (A60)
OFF
Focus mode (A62)
Autofocus
Exposure compensation (A64)
0.0
Shooting in the Scene Mode
Option
Default value
Scene auto selector
Night portrait (A40)
Tripod
Close-up (A41)
Single shot
Hue adjustment in Food mode (A42)
Center
Panorama (A43)
Normal (180°) in Easy panorama
Pet portrait (A44)
Pet portrait auto release: ON
Continuous: Continuous
Night Landscape Menu
Option
Night landscape (A37)
Default value
Hand-held
Landscape Menu
Option
Landscape (A38)
Reference Section
Scene menu (A36)
Default value
Single shot
Backlighting Menu
Option
HDR (A38)
Default value
Off
Special Effects Menu
Option
Special effects (A47)
Default value
Soft
E81
The Setup Menu
Shooting Menu
Option
Default value
Image quality (A72)
Normal
Image size (A73)
r 4896×3672
Picture Control (E26)
Standard
White balance (E31)
Auto (normal)
Fine adjustment in white balance (E31)
0
Metering (E33)
Matrix
Continuous (E34)
Single
Intvl timer shooting (E36)
30 s
ISO sensitivity (E38)
Auto
Minimum shutter speed (E38)
None
Exposure bracketing (E39)
Off
AF area mode (E40)
Auto
Autofocus mode (E44)
Single AF
Flash exp. comp. (E45)
0.0
Noise reduction filter (E45)
Normal
Active D-Lighting (E46)
Off
Zoom memory (E47)
Off
Startup zoom position (E47)
24 mm
Reference Section
Movie Menu
Option
Default value
Movie options (E48)
d 1080P/30p or
o 1080P/25p
Autofocus mode (E51)
Single AF
GPS Options Menu
Option
Default value
Record GPS data (E59)
Off
Embed POI (E60)
Off
Display POI (E60)
Off
Level of detail (E60)
Level 6 (detailed)
Log interval (E61)
15 s
Log recording duration (E61)
Log data for next 6 hrs
E82
The Setup Menu
Setup Menu
Option
Default value
Welcome screen (E64)
None
Image review (E67)
On
Brightness (E67)
3
View/hide framing grid (E67)
Off
View/hide histograms (E67)
Off
Print date (E68)
Off
Vibration reduction (E69)
Normal
Motion detection (E70)
Off
AF assist (E71)
Auto
Digital zoom (E71)
On
Assign side zoom control (E72)
Zoom
Button sound (E73)
On
Shutter sound (E73)
On
Auto off (E73)
1 min
HDMI (E75)
Auto
HDMI device control (E75)
On
HDMI 3D output (E75)
On
Charge by computer (E76)
Auto
Do not toggle selection
Blink warning (E79)
Off
Eye-Fi upload (E80)
Enable
Reverse indicators (E80)
+0-
Function Menu
Option
Fn button (A71)
Reference Section
Toggle Av/Tv selection (E78)
Default value
Continuous
Others
Option
Default value
Paper size (E20, E21)
Default
Frame intvl for Slide show (E54)
3s
Sequence display options (E58)
Key picture only
E83
The Setup Menu
• Choosing Reset all also clears the current file number (E90) in the memory.
After resetting, numbering continues from the lowest number available in the
internal memory or the memory card. If Reset all is performed after all pictures
are deleted from the internal memory or memory card (A33), the file numbers
for the next pictures taken start from “0001.”
• The following settings remain unaffected even if Reset all is performed.
Shooting menu: Custom Picture Control registration (E30) and preset
manual data for White balance (E32)
Setup menu: Time zone and date (E65), Language (E74) and Video
mode (E75) in TV settings
• User settings that were saved for mode dial M are not reset to the default settings
when Reset all is performed. To change these settings back to the default
settings, use Reset user settings (E46).
Firmware Version
Press the d button M z tab (A10) M Firmware version
Displays the current camera firmware version.
COOLPIX P520 Ver.X.X
Reference Section
E84
Back
Additional Information
Error Messages
The following table lists the error messages and other warnings displayed on the
monitor, as well as the solutions for dealing with them.
Display
A
Cause/Solution
O
(flashes)
Clock not set.
Set date and time.
E65
Battery exhausted.
Battery exhausted.
Charge or replace the battery.
16, 18
Battery temperature
is elevated. The
camera will turn off.
Battery temperature is high.
Turn off camera, and allow battery to cool down before
resuming use. Five seconds after this message appears, the
monitor is turned off, and the power-on lamp starts flashing
23
quickly. After the lamps flash for three minutes, the camera turns
off automatically, but you can also press the power switch to
turn it off manually.
The camera will turn
off to prevent
overheating.
Inside of the camera has become hot. The camera turns off
automatically.
Leave the camera off until the inside of the camera has cooled
and then turn it on again.
Q
(flashes red)
Camera cannot perform other operations until recording is
complete.
Wait until message clears from display automatically when
recording is complete.
Memory card is write Write-protect switch of the memory card is in “lock” position.
protected.
Slide the write-protect switch to “write” position.
Write-protect switch of Eye-Fi card is in “lock” position.
Slide the write-protect switch to “write” position.
Not available if Eye-Fi
Error accessing Eye-Fi card.
card is locked.
• Check that the terminal is clean.
• Confirm that memory card is correctly inserted.
This card cannot be
used.
This card cannot be
read.
Card is not formatted.
Format card?
Yes
No
Error accessing memory card.
• Use an approved card.
• Check that the terminal is clean.
• Confirm that memory card is correctly inserted.
30
81
–
–
–
Reference Section
Please wait for the
camera to finish
recording.
Camera cannot focus.
• Refocus.
• Use focus lock.
–
20
20
21
20
20
Memory card has not been formatted for use in this camera.
All data stored on the memory card is deleted when formatted.
If there is any data on the card that you want to keep, select No,
20
and backup the data to a computer before formatting the
memory card. To format the memory card, select Yes and press
the k button.
E85
Error Messages
Display
Out of memory.
Image cannot be
saved.
Unable to create
panorama.
Unable to create
panorama. Pan the
camera in one
direction only.
Unable to create
panorama. Pan the
camera more slowly.
Reference Section
Shooting failed
A
Cause/Solution
Memory card is full.
• Choose lower image quality or smaller image size.
• Delete pictures and movies.
• Replace memory card.
• Remove memory card and use internal memory.
72, 73
33, 97
20
21
Error occurred while recording picture.
Format the internal memory or memory card.
E74
Camera has run out of file numbers.
Replace the memory card, or format the internal memory/
memory card.
20,
E74
Picture cannot be used for welcome screen.
E64
There is insufficient space to save a copy.
Delete pictures from destination.
33
Cannot perform Easy panorama shooting.
Easy panorama shooting may not be available in the following
situations.
• When shooting has not finished after a certain period of time E3
• When the camera movement speed is too fast
• When the camera is not straight relative to the panorama
direction
Failed to shoot the first image for 3D photography.
• Try shooting again.
• In some shooting conditions, such as when the subject
moves or the subject is dark or low in contrast, the picture
may not be taken.
45
–
When taking 3D images, the second shot could not be
successfully taken after the first shot.
• Try shooting again. After taking the first shot, move the
45
Failed to take second
camera horizontally and frame the subject so that it is aligned
shot
with the guide.
• In some shooting conditions, such as when the subject
–
moves or the subject is dark or low in contrast, the second
shot may not be taken.
Failed to save 3D
image
Failed to save the 3D images.
• Try shooting again.
45
• Delete unnecessary pictures.
33
• In some shooting conditions, such as when the subject
–
moves or the subject is dark or low in contrast, the 3D images
may not be created, resulting in failure to save them.
Sound file cannot be
saved.
A voice memo cannot be attached to this file.
• Voice memos cannot be attached to movies.
• Select a picture taken with this camera.
E86
–
E56
Error Messages
Display
A
Cause/Solution
Image cannot be
modified.
Cannot edit selected picture.
• Confirm the conditions that are required for editing.
• These options cannot be used with movies.
Cannot record movie.
Time out error while recording movie.
Choose a memory card with a faster write speed.
21
Cannot reset file
numbering.
No more folders can be created.
Insert a new memory card, or format the internal memory/
memory card.
20,
E74
Memory contains no
images.
No pictures in the internal memory or memory card.
• To view the pictures stored in the internal memory, remove
the memory card.
• To copy pictures from internal memory to a memory card,
press the d button and select Copy from the playback
menu.
File contains no
image data.
This file cannot be
played back.
File not created with the COOLPIX P520.
File cannot be viewed on this camera.
View file using the computer or any other devices which was
used to create or edit this file.
E11
–
20
E57
–
–
This image cannot be Picture is protected.
deleted.
Disable protection.
E55
Travel destination is in
Destination in same time zone as home.
the current time zone.
–
Mode dial is not in
the proper position.
Mode dial is between two modes.
Rotate the mode dial to select the desired mode.
26
Raise the flash.
• When the scene mode is Scene auto selector, you can take 39
a picture even if the flash is lowered but the flash will not fire.
• When the scene mode is Night portrait or R (Backlighting) 38, 40
with HDR set to Off, you must raise the flash to take a
picture.
Lens error
Lens error occurred.
Turn the camera off and then on again. If the error persists,
contact retailer or Nikon-authorized service representative.
23
Communications
error
Error occurred during communication with printer.
Turn off camera and reconnect the USB cable.
E19
System error
Error has occurred in camera’s internal circuitry.
Turn off camera, remove and reinsert battery, and turn on
23
camera. If the error persists, contact retailer or Nikon-authorized
service representative.
Could not obtain GPS The camera clock is not set correctly.
data.
Change the location or time and determine the location again.
Reference Section
All images are hidden. No images available for a slide show.
–
E87
Error Messages
A
Display
Cause/Solution
No A-GPS file found
on card
An A-GPS file that can be updated is not found on the memory
card.
Check the following items.
• Whether the memory card is inserted
–
• Whether the A-GPS file is stored on the memory card
• Whether the A-GPS file saved on the memory card is more
recent than the A-GPS file saved in the camera
• Whether the A-GPS file is still valid
Update failed
Unable to update A-GPS file.
The A-GPS file may be corrupted. Download the file from the
website once more.
E59
A memory card is not inserted.
Insert a memory card.
20
100 log data events have already been saved or 36 log data
events have been saved for one day.
Delete log data that is no longer required from a memory card
or replace the memory card with a new one.
E63
Cannot save to card
Reference Section
E88
Error Messages
A
Display
Cause/Solution
Printer error: check
printer status.
Printer error.
Check printer. After solving the problem, select Resume and
press the k button to resume printing.*
–
Printer error: check
paper
Specified size of paper is not loaded.
Load the specified size of paper, select Resume and press the
k button to resume printing.*
–
Printer error: paper
jam
Paper has jammed in the printer.
Remove the jammed paper, select Resume and press the k
button to resume printing.*
–
Printer error: out of
paper
No paper is loaded in the printer.
Load the specified size of paper, select Resume and press the
k button to resume printing.*
–
Printer error: check
ink
Ink error.
Check ink, select Resume and press the k button to resume
printing.*
–
Printer error: out of
ink
Ink cartridge is empty.
Replace ink cartridge, select Resume and press the k button
to resume printing.*
–
Printer error: file
corrupt
An error caused by the image file has occurred.
Select Cancel and press the k button to cancel printing.
–
* See the instruction manual provided with your printer for further guidance and information.
Reference Section
E89
File and Folder Names
Pictures, movies and voice memos are assigned file names as follows.
File name : DSCN0001.JPG
(1)
(1) Identifier
(2) File number
Reference Section
(3) Extension
E90
(2)
(3)
Not displayed on camera monitor.
Original still pictures, movies, still pictures extracted
DSCN
from movies
SSCN
Small copies
RSCN
Cropped copies
Pictures created with picture editing other than crop
FSCN
and small picture, movies created with movie editing
Assigned automatically in ascending order, starting from “0001” to
“9999.”
• When the file numbers in a folder reach “9999,” a new folder is
created and the next file number returns to “0001.”
• Serial file numbers are automatically assigned to still pictures
that are saved during movie recording (A95), starting from the
“file number of the movie currently being recorded + 1.”
Signifies the file type.
.JPG
JPEG still pictures
.MOV
Movies
Voice memos
.WAV
• Identifier and file number are the same as the picture
to which the voice memo is attached.
.MPO
3D images
File and Folder Names
Folder name : 100NIKON
(1)
(1) Folder number
(2) Folder name
(2)
Assigned automatically in ascending order, starting from “100” to
“999.”
• A new folder is created under the following conditions.
- When the number of files in a folder reaches 200
- When the file numbers in a folder reach 9999
- When Reset file numbering (E78) is performed
• If a folder is empty, a new folder is not created even if Reset file
numbering is performed.
Still pictures and movies other than those taken using
NIKON
panorama assist or interval timer shooting
Pictures taken using panorama assist
• A new folder is created each time a picture is taken.
P_001
• The pictures are sequentially saved in file numbers
starting from 0001.
Pictures taken using interval timer shooting
• A new folder is created each time a picture is taken.
INTVL
• The pictures are sequentially saved in file numbers
starting from 0001.
B Notes
Reference Section
• When image files or voice files are copied to or from the internal memory or memory card (E57),
the file naming conventions are as follows:
- Selected images:
Files copied using selected images are copied to the current folder (or to the folder used for
subsequent pictures), where they are assigned file numbers in ascending order following the
largest file number in memory.
- All images:
Files copied using all images, along with their folder, are copied together. Folder numbers are
assigned in ascending order, following the largest folder number on the destination medium.
File names are not changed.
• When the current folder is numbered 999, if there are 200 files in the folder or if a file is numbered
9999, no further pictures can be shot until the internal memory or memory card is formatted
(E74), or a new memory card is inserted.
C GPS Log Data Saved on Memory Cards
• The log data is saved in the “NCFL“ folder.
The file names consist of “N“, “date (the last two digits of the year, month, and date)“, “identification
number (0 to 9 and A to Z)“ and “extension (.log).“
Example: the first GPS log recorded on 15 May 2013 is
N1305150.log
• Up to 36 files can be recorded a day and up to 100 files can be recorded on a memory card.
E91
Optional Accessories
Battery charger
Battery Charger MH-61
(Charging time when the battery is completely used up: Approx. 2
hours)
AC Adapter EH-62A (connect as shown)
1
2
3
AC adapter
Before closing the battery-chamber/memory card slot cover, fully
insert the power connector cord into the slot in the battery chamber.
If part of the cord runs out of the groove, the cover or cord may be
damaged when the cover is closed.
Reference Section
Hand strap
Hand Strap AH-CP1
Wireless Mobile
Adapter
Wireless Mobile Adapter WU-1a
When you attach the WU-1a to the USB/Audio video connector
(A1), the camera can connect via Wi-Fi (wireless LAN) connection
to smart devices that have the dedicated software installed.
You can use your smart device to release the camera's shutter by
remote operation or copy images stored on the memory card
inserted in the camera to the smart device.
• Operations other than turning on and off the camera using the
camera's controls cannot be performed during remote control
operation.
• This function cannot be used when the Eye-Fi card is inserted into
the camera.
See our websites, product catalogs, or the instruction manual of the
WU-1a for further details.
See our websites or product catalogs for up-to-date information on accessories for
the COOLPIX P520.
E92
Technical Notes and Index
Caring for the Products ..................................................F2
The Camera.....................................................................................................................F2
The Battery......................................................................................................................F3
Charging AC Adapter..................................................................................................F4
The Memory Cards .......................................................................................................F5
Caring for the Camera ....................................................F6
Cleaning...........................................................................................................................F6
Storage .............................................................................................................................F6
Troubleshooting.............................................................F7
USER LICENSE AGREEMENT FOR LOCATION
NAME DATA ..................................................................F15
Specifications................................................................F19
Supported Standards............................................................................................... F22
Index ..............................................................................F24
F1
Caring for the Products
The Camera
To ensure continued enjoyment of this Nikon product, observe the following
precautions when using or storing the device.
Be sure to read and follow the warnings of “For Your Safety” (Avi to viii)
thoroughly before using the products.
B Keep Dry
The device will be damaged if immersed in water or subjected to high humidity.
B Do Not Drop
The product may malfunction if subjected to strong shock or vibration.
B Handle the Lens and All Moving Parts with Care
Do not apply force to the lens, lens cover, monitor, memory card slot, or battery chamber. These
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes
or mouth.
B Do Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the image sensor, producing a white
blur effect in photographs.
Technical Notes and Index
B Keep away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charge or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data saved on the memory card,
or affect the product’s internal circuitry.
B Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
B Turn the Product off Before Removing or Disconnecting the Power Source
or the Memory Card
Do not remove the battery while the product is on, or while images are being saved or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
F2
Caring for the Products
B Notes on the Monitor
• Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99%
of pixels are effective, with no more than 0.01% being missing or defective. Hence while these
displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is
not a malfunction and has no effect on images recorded with the device.
• Images on the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
The Battery
F3
Technical Notes and Index
• Be sure to read and follow the warnings of “For Your Safety” (Avi to viii)
thoroughly before using the battery.
• Check the battery level before using the camera and replace or charge the
battery if necessary. Do not continue charging once the battery is fully charged
as this will result in reduced battery performance. Whenever possible, carry a
fully charged spare battery when taking pictures on important occasions.
• Do not use the battery at ambient temperatures below 0°C (32°F) or above 40°C
(104°F).
• Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to
95°F) before use.
• When the battery temperature is between 45°C to 60°C (113°F to 140°F), the
chargeable capacity may decrease.
• The battery is not charged at ambient temperatures below 0°C (32°F) or above
60°C (140°F).
• Note that the battery may become hot during use; wait for the battery to cool
before charging. Failure to observe these precautions could damage the
battery, impair its performance, or prevent it from charging normally.
• On cold days, the capacity of batteries tends to decrease. Be sure that the
battery is fully charged before heading outside to take pictures in cold weather.
Keep spare batteries in a warm place and exchange as necessary. Once warmed,
a cold battery may recover some of its charge.
• Dirt on the battery terminals can prevent the camera from functioning. Should
the battery terminals become dirty, wipe them off with a clean, dry cloth before
use.
Caring for the Products
• If the battery will not be used for some time, insert it in the camera and run it flat
before removing it for storage. The battery should be stored in a cool location
with an ambient temperature of 15°C to 25°C (59°F to 77°F). Do not store the
battery in hot or extremely cold locations.
• Always remove the battery from the camera or battery charger when it is not
being used. When inserted, minute amounts of current are drawn from the
battery even when not in use. This may result in excessive draining of the
battery and complete loss of function. Turning the camera on or off while the
battery is exhausted can result in reduced battery life. When the battery level is
low, be sure to charge the battery before using it.
• Recharge the battery at least once every six months and completely exhaust it
before returning it to storage.
• After removing the battery from the camera or battery charger, attach the
included terminal cover to the battery and store it in a cool place.
• A marked drop in the time a fully-charged battery retains its charge, when used
at room temperature, indicates that the battery needs to be replaced. Purchase
a new EN-EL5 battery.
• Replace the battery when it no longer holds a charge. Used batteries are a
valuable resource. Please recycle used batteries in accordance with local
regulations.
Charging AC Adapter
Technical Notes and Index
• Be sure to read and follow the warnings of “For Your Safety” (Avi to viii)
thoroughly before using the Charging AC Adapter.
• The Charging AC Adapter EH-69P is for use only with compatible devices. Do
not use with another make or model of device.
• The EH-69P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When
using in other countries, use a plug adapter (commercially available) as
necessary. For more information about plug adapters, consult your travel
agency.
• Do not, under any circumstances, use another make or model of AC adapter
other than the Charging AC Adapter EH-69P or USB-AC adapter. Failure to
observe this precaution could result in overheating or in damage to the camera.
F4
Caring for the Products
The Memory Cards
F5
Technical Notes and Index
• Use only Secure Digital memory cards. See “Approved Memory Cards” (A21).
• Be sure to observe the precautions in the memory card documentation when
you use the memory card.
• Do not affix labels or stickers to the memory card.
• Do not format the memory card using a computer.
• When a memory card that has been used in another device is used for the first
time, be sure to format it with this camera.
When a new memory card is used, it is recommended to format it with this
camera first.
• Formatting permanently deletes all data in the memory card. Be sure to transfer
important pictures to a computer before formatting.
• If the error message “Card is not formatted. Format card?” is displayed when you
insert a memory card into this camera, the memory card must be formatted. If
the memory card contains images you wish to keep, select No and save those
images on your computer before formatting the memory card. To format the
card, select Yes and press the k button.
• Do not perform the following during formatting, while data is being written to
or deleted from the memory card, or during data transfer to a computer.
Failure to observe this precaution could result in loss of data or damage to the
memory card:
- Open the battery-chamber/memory card slot cover to remove the battery or
memory card.
- Turn off the camera
- Disconnect the AC adapter
Caring for the Camera
Cleaning
Avoid touching glass parts with your fingers. Remove dust or lint with a blower
(typically a small device with a rubber bulb attached to one end that is
pumped to produce a stream of air out the other end). To remove fingerprints,
oily substances, or other stains that cannot be removed with a blower, carefully
Lens/
wipe the lens with a dry soft cloth or eyewear cleaning cloth, using a spiral
viewfinder
motion that starts at the center of the lens and working toward the edges. Do
not wipe the lens forcibly or with a hard material. Failure to observe this
precaution could result in damage or trouble. If this fails, clean the lens using a
cloth lightly dampened with commercial lens cleaner.
Monitor
Remove dust or lint with a blower. To remove fingerprints, oily substances or
other stains, carefully wipe the monitor with a dry soft cloth or eyewear
cleaning cloth. Do not wipe the monitor forcibly or with a hard material. Failure
to observe this precaution could result in damage or trouble.
Body
Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry
cloth. After using the camera at the beach or other sandy or dusty
environment, wipe off any sand, dust, or salt with a dry cloth lightly dampened
with fresh water and dry thoroughly. Note that foreign matter inside the
camera could cause damage not covered by the warranty.
Do not use volatile organic solvents such as alcohol or thinner, chemical
detergents, anticorrosive agents, or anti-fogging agents.
Storage
Technical Notes and Index
Remove the battery if the camera will not be used for an extended period. Do not
store the camera with naphtha or camphor moth balls, or in any of the following
locations:
• Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
• Exposed to temperatures below –10°C (14°F) or above 50°C (122°F)
• Places that are poorly ventilated or subject to humidity of over 60%
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.
Be sure to read and follow the warnings given in “The Battery” (F3) of “Caring for
the Products” to store the battery.
F6
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
• See “Error Messages” (E85) for more information.
Power, Display, Settings Issues
Problem
The camera is on
but does not
respond.
A
Cause/Solution
• Wait for recording to end.
–
• If the problem persists, turn the camera off. If the camera does 23
not turn off, remove and reinsert the battery or batteries or, if
you are using an AC adapter, disconnect and reconnect the AC
adapter.
Note that although any data currently being recorded will be
lost, data that have already been recorded will not be affected
by removing or disconnecting the power source.
The battery
inserted in the
Confirm all connections.
camera cannot be
charged.
105, E76
E76
E76
–
Camera cannot be
turned on.
• Battery is exhausted.
22
• The camera does not turn on while the Charging AC Adapter is –
connected to it even when you press the power switch. Press
and hold the c (playback) button to turn on the camera in
playback mode. However, shooting is not possible.
Camera turns off
without warning.
• Battery is exhausted.
• If no operations are performed for a while, camera has turned
off automatically by auto off to save power.
• The camera turns off if the Charging AC Adapter is connected
while the camera is on.
• The camera turns off if the USB cable connecting the camera
to a computer or printer is disconnected. Reconnect the USB
cable.
• Inside of the camera has become hot. Leave the camera off
until the inside of the camera has cooled.
• At low temperatures, the camera and the battery may not
function normally.
Technical Notes and Index
• Off is selected for Charge by computer in the setup menu.
• When charging by connecting the camera to a computer,
The battery cannot
battery charging stops when the camera is turned off.
be charged by
• When charging by connecting the camera to a computer,
connecting the
battery charging stops when the computer is suspended
camera to a
(sleeping), and the camera may turn off.
computer.
• Depending upon computer specifications, settings, and status,
charging the battery inserted in the camera may not be
possible via computer connection.
18
22
23
18
87, 90,
E19
–
F3
F7
Troubleshooting
Problem
A
Cause/Solution
• Camera is off.
• Battery is exhausted.
• Standby mode for saving power: Press the power switch,
shutter-release button, c button or b (e movie-record)
button, or rotate the mode dial.
Monitor or
• Monitor and viewfinder cannot be used simultaneously. It may
viewfinder is blank.
take some time to switch between monitor and viewfinder.
• Camera and computer are connected via USB cable.
• Camera and TV are connected via audio/video cable or HDMI
cable.
• Interval timer shooting in progress.
23
22
23
8
87, 90
87, E17
E36
• Ambient lighting too bright: move to darker location or use
viewfinder.
• Adjust monitor screen brightness.
• Monitor is dirty. Clean monitor screen.
8
The viewfinder is
hard to see.
Adjust diopter adjustment control.
8
Date and time of
recording are not
correct.
• If the camera clock has not been set (“Date not set” indicator 24, 103,
flashes during shooting), still pictures have a time stamp of
E65
“00/00/0000 00:00”; and movies are dated “01/01/2013 00:00.”
Set the correct date and time using Time zone and date in
the setup menu.
• The camera clock is not as accurate as a normal clock, such as 103, E65
watches. Check camera clock regularly against more accurate
timepieces and reset as required.
No information
displayed on the
monitor.
Shooting and photo information may be hidden. Press the s
button until shooting information or photo information is
9
displayed.
Print date not
available.
Time zone and date in the setup menu has not been set.
Monitor screen is
hard to see.
103, E67
F6
Technical Notes and Index
24, 103,
E65
Date not
appearing on
• A shooting mode that does not support print date is selected. 103, E68
75
pictures even
• Another function that is set now is restricting the print date.
–
when Print date is • The date cannot be imprinted onto a movie.
enabled.
Screen for setting
time zone and
date is displayed
when camera is
turned on.
Clock battery is exhausted; all settings were restored to their
default values.
25
Reset file numbering cannot be applied when the folder
number reaches 999 and there are images in the folder. Change
the memory card, or format the internal memory/memory card.
105, E78
Camera settings
reset.
Reset file
numbering
cannot be done.
F8
Troubleshooting
Problem
A
Cause/Solution
Monitor is turned Battery temperature is high. Turn off camera, and allow battery to
off, and the power- cool down before resuming use. After the lamp flashes for 3
23
on lamp flashes
minutes, the camera turns off automatically, but you can also
quickly.
press the power switch to turn it off manually.
Camera
temperature rises.
When functions such as movie recording or sending images
using an Eye-Fi card are used for a long time, or when the camera
94
is used in a location with a high ambient temperature, the
camera temperature may rise. This is not a malfunction.
Shooting Issues
Problem
Cause/Solution
Cannot set to
shooting mode.
Disconnect the HDMI cable or USB cable.
No picture can be
taken.
• When camera is in playback mode, press the c button,
shutter-release button or b (e movie-record) button.
• When menus are displayed, press the d button.
• Battery is exhausted.
• When the scene mode is Night portrait or R (Backlighting)
with HDR set to Off, raise the flash.
• When flash lamp flashes, flash is charging.
Cannot take 3D
images
In some shooting conditions, such as when the subject moves or
the subject is dark or low in contrast, the second shot may not be –
taken or the 3D image may not be saved.
Camera cannot
focus.
• Incorrect focus mode setting. Check or change the setting.
• The intended subject is one with which autofocus does not
perform well.
• Set AF assist in the setup menu to Auto.
• Subject is not in focus area when shutter-release button is
pressed halfway.
• The focus mode is set to E (manual focus).
• Turn camera off and then on again.
A
87, 90,
E17,
E19
32
10
22
38, 40,
56
56
62, 63
81
62
23
Colored stripes
appear on the
monitor when
shooting.
Colored stripes may appear when shooting subjects with
repeating patterns (such as window blinds); this is not a
malfunction.
The colored stripes will not appear in captured images or
–
recorded movies. However, when using Continuous H: 120 fps
or HS 480/4×, the colored stripes may be seen in the captured
images and recorded movies.
Pictures are
blurred.
• Use flash.
• Use vibration reduction or motion detection.
• Use D (Best Shot Selector).
• Use a tripod to stabilize the camera (use with the self-timer for
better results).
56
104, 104
68
59
F9
Technical Notes and Index
104, E71
30, 69
Troubleshooting
Problem
Cause/Solution
A
Bright specks
appear in pictures
shot using flash.
Flash is reflecting off particles in air. Lower the flash.
56
Flash does not fire.
• A shooting mode where flash cannot fire is selected.
• Another function that is set now is restricting the flash.
65
75
• Off is selected for Digital zoom in the setup menu.
• When R (Backlighting) (HDR setting is other than Off), Scene
The digital zoom is
auto selector, Portrait, Night portrait, Easy panorama in
not available.
Panorama, Pet portrait or 3D photography is selected in
scene mode, the digital zoom cannot be used.
• Other functions that restrict the use of digital zoom are set.
Image size not
available.
No sound when
shutter is released.
104
38, 39, 39,
40, 43,
44, 45
75
• Another function that is set now is restricting Image size.
• When the scene mode is set to Easy panorama in
Panorama or 3D photography, the image size is fixed.
75
43, 45
• Off is selected for Shutter sound under Sound settings in
the setup menu.
• Sports, Museum or Pet portrait is selected in scene mode.
104
• Other functions that restrict the use of the shutter sound are
set.
• Do not block the speaker.
40, 42,
44
75
2
Technical Notes and Index
AF-assist
illuminator does
not light.
Off is selected for AF assist in the setup menu. Even when Auto
is set, AF-assist illuminator may not light depending on the focus 104
area position or scene mode.
Pictures appear
smeared.
Lens is dirty. Clean lens.
F6
Colors are
unnatural.
White balance does not match light source.
68, E31
Ring-shaped or
rainbow-colored
bands are seen on
the screen or the
shot image.
When the subject is backlit or when shooting with an extremely
bright light source in the display, such as in sunlight, ring-shaped
or rainbow-colored bands may appear on the image.
–
Change the position of the light source or remove it from the
display, and try shooting again.
The image taken
becomes grainy.
As the subject is dark, shutter speed is too slow or ISO sensitivity
is too high.
• Use flash.
56
• Specify a lower ISO sensitivity setting.
69, E38
Pictures are too
dark
(underexposed).
• Flash window is blocked.
• Subject is beyond flash range.
• Adjust exposure compensation.
• Raise the ISO sensitivity.
• Subject is backlit. Raise the flash, and set the scene mode R
(Backlighting) with HDR set to Off or set the flash mode to m
(fill flash).
F10
28
56
64
69, E38
38, 56
Troubleshooting
Problem
Pictures are too
bright
(overexposed).
Cause/Solution
Adjust exposure compensation.
A
64
When V (auto with red-eye reduction) or “fill flash with red-eye
reduction” of the Night portrait scene mode is applied during
Areas not affected
shooting, In-Camera Red-Eye Fix may, in very rare cases, be
by red-eye are also
40, 56
applied to areas not affected by red-eye. Set the flash mode to
corrected.
other than V (auto with red-eye reduction), select a scene
mode other than Night portrait, and resume shooting.
Skin softening
results are not as
expected.
• Skin softening may not produce the desired results depending 46
on shooting conditions.
• For pictures with 4 or more faces, try using Skin softening in 84,
the playback menu.
E13
Saving images
takes time.
It may take more time to save images in the following situations.
• When the noise reduction function is in operation
• When flash is set to V (auto with red-eye reduction)
• When taking pictures in the following scene modes.
- Hand-held in X (Night landscape)
- Noise reduction burst in c (Landscape) or Close-up
- HDR set to other than Off in R (Backlighting)
- Easy panorama in Panorama
• Continuous in the shooting menu is set to Continuous H:
120 fps or Continuous H: 60 fps
• When using smile timer while shooting
• When using Active D-Lighting while shooting
Cannot set or use
Continuous or
Exposure
bracketing.
Another function that is set now is restricting Continuous or
Exposure bracketing.
75
Cannot set
COOLPIX Picture
Control.
Another function that is set now is restricting COOLPIX Picture
Control.
75
–
57
37
38, 41
38
43
68,
E34
60
69, E46
Technical Notes and Index
F11
Troubleshooting
Playback Issues
Problem
Cause/Solution
A
–
File cannot be
played back.
• File was overwritten or renamed by computer or another
make or model of camera.
• File cannot be played back during interval timer shooting.
• Movies recorded with cameras other than the COOLPIX P520
cannot be played back.
Cannot play a
sequence.
• Pictures shot continuously with cameras other than the
COOLPIX P520 cannot be played as a sequence.
• Check the Sequence display options setting.
–
68
92
85, E58
–
• Playback zoom cannot be used with movies, small pictures, or
cropped copies of size 320 × 240 pixels or smaller.
–
Cannot zoom in on • Playback zoom may not be available for pictures taken with
cameras other than the COOLPIX P520.
picture.
• 3D images cannot be enlarged when the camera is connected 45
via HDMI and they are played back in 3D.
Technical Notes and Index
Cannot record or
play back voice
memo.
• Voice memos cannot be attached to movies.
• Voice memos cannot be attached to pictures taken with
cameras other than the COOLPIX P520, and voice memos
recorded by other cameras cannot be played back.
Pictures and
movies cannot be
edited.
• Confirm the conditions that are required for editing pictures or 85, E11,
movies.
E24
• Pictures and movies taken with cameras other than the
–
COOLPIX P520 cannot be edited.
Pictures are not
displayed on
television.
• Video mode or HDMI is not correctly set in the TV settings
setup menu.
• HDMI output is disabled when the camera is connected to
either a computer or printer with a USB cable.
• Memory card contains no pictures. Replace memory card.
Remove memory card to play back pictures from internal
memory.
105,
E75
87
Nikon Transfer 2
does not start
when camera is
connected to a
computer.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm that the operating system used is compatible with
the camera.
• Computer is not set to launch Nikon Transfer 2 automatically.
For more information on Nikon Transfer 2, refer to help
information contained in ViewNX 2.
23
22
87
–
88
The PictBridge
startup screen is
not displayed
when the camera
is connected to a
printer.
With some PictBridge-compatible printers, the PictBridge startup
screen may not be displayed and it may be impossible to print
images when Auto is selected for the Charge by computer
105, E76
option. Set the Charge by computer option to Off and
reconnect the camera to the printer.
F12
97
85
20
91
Troubleshooting
Problem
Cause/Solution
A
Pictures to be
printed are not
displayed.
• Memory card contains no pictures. Replace memory card.
20
• Remove memory card to print pictures from internal memory. 21
• Pictures taken by 3D photography cannot be printed.
45
Cannot select
paper size with
camera.
Paper size cannot be selected from the camera in the following
situations, even for PictBridge compatible printers. Use the
printer to select paper size.
• The paper size selected using the camera is not compatible
with the printer.
• A printer that automatically sets the paper size is being used.
E20,
E21
–
Technical Notes and Index
F13
Troubleshooting
GPS
A
Technical Notes and Index
Problem
Cause/Solution
Unable to identify
the location or it
takes time to
identify the
location.
• The camera may not be able to identify the location in some
shooting environments. To use the GPS feature, use the
camera as much as possible in an open-air area.
• When positioning for the first time, when positioning was
unable to be performed for about two hours, or after the
battery was changed, it takes a few minutes to obtain the
positioning information.
Unable to record
position
information on
shot images.
When signals are not received from the satellites and positioning
cannot be performed, the position information is not recorded. 100
Before shooting pictures, check the GPS reception indicator.
Difference
between the
actual shooting
location and
recorded position
information.
The acquired position information may deviate in some shooting
environments. When there is a significant difference in the
98
signals from the GPS satellites, there could be a deviation of up to
several hundred meters.
An incorrect
location name is
recorded or the
correct location
name is not
displayed.
The desired landmark name may not be registered or an
incorrect landmark name may be displayed.
Unable to update
the A-GPS file.
• Check the following items.
- Whether the memory card is inserted
- Whether the A-GPS file is stored on the memory card
- Whether the A-GPS file saved on the memory card is more
recent than the A-GPS file saved in the camera
- Whether the A-GPS file is still valid
• The A-GPS file may be corrupted. Download the file from the
website once more.
Unable to select
Create log in the Clock not set. Set date and time.
GPS options menu.
Unable to select
Start log.
99
99
–
–
E59
103, E65
• Record GPS data in GPS options of the GPS options menu is 98
set to Off.
• Recording log data. Select End log and finish log recording to 102, E61
start a new log.
–
• Be sure that a memory card is inserted in the camera.
–
• Up to 36 log data events can be recorded in a day.
Unable to save log
• Up to 100 log data events can be stored on a single memory E63
data.
card. Delete log data that is no longer required from a memory
card or replace the memory card with a new one.
F14
USER LICENSE AGREEMENT FOR LOCATION NAME DATA
The location name data that are stored in this
digital camera ("Data") is provided for your
personal, internal use only and not for resale. It
is protected by copyright, and is subject to the
following terms and conditions which are
agreed to by you, on the one hand, and Nikon
Corporation ("Nikon") and its licensors
(including their licensors and suppliers) on the
other hand.
Terms and Conditions
F15
Technical Notes and Index
Personal Use Only. You agree to use this Data
together with this digital camera and the
image data taken by the digital camera for the
solely personal, non-commercial purposes for
which you were licensed, and not for service
bureau, time-sharing or other similar purposes.
Accordingly, but subject to the restrictions set
forth in the following paragraphs, you agree
not to otherwise reproduce, copy, modify,
decompile, disassemble or reverse engineer
any portion of this Data, and may not transfer
or distribute it in any form, for any purpose,
except to the extent permitted by mandatory
laws.
Restrictions. Except where you have been
specifically licensed to do so by Nikon, and
without limiting the preceding paragraph, you
may not (a) use this Data with any products,
systems, or applications installed or otherwise
connected to or in communication with
vehicles, capable of vehicle navigation,
positioning, dispatch, real time route guidance,
fleet management or similar applications; or (b)
with or in communication with any positioning
devices or any mobile or wireless-connected
electronic or computer devices, including
without limitation cellular phones, palmtop
and handheld computers, pagers, and personal
digital assistants or PDAs.
Warning. The Data may contain inaccurate or
incomplete information due to the passage of
time, changing circumstances, sources used
and the nature of collecting comprehensive
geographic data, any of which may lead to
incorrect results.
No Warranty. This Data is provided to you "as
is," and you agree to use it at your own risk.
Nikon and its licensors (and their licensors and
suppliers) make no guarantees, representations
or warranties of any kind, express or implied,
arising by law or otherwise, including but not
limited to, content, quality, accuracy,
completeness, effectiveness, reliability, fitness
for a particular purpose, usefulness, use or
results to be obtained from this Data, or that
the Data or server will be uninterrupted or
error-free.
Disclaimer of Warranty: NIKON AND ITS
LICENSORS (INCLUDING THEIR LICENSORS AND
SUPPLIERS) DISCLAIM ANY WARRANTIES,
EXPRESS OR IMPLIED, OF QUALITY,
PERFORMANCE, MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
Some States, Territories and Countries do not
allow certain warranty exclusions, so to that
extent the above exclusion may not apply to
you.
Disclaimer of Liability: NIKON AND ITS
LICENSORS (INCLUDING THEIR LICENSORS AND
SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN
RESPECT OF ANY CLAIM, DEMAND OR ACTION,
IRRESPECTIVE OF THE NATURE OF THE CAUSE
OF THE CLAIM, DEMAND OR ACTION ALLEGING
ANY LOSS, INJURY OR DAMAGES, DIRECT OR
INDIRECT, WHICH MAY RESULT FROM THE USE
OR POSSESSION OF THE INFORMATION; OR
FOR ANY LOSS OF PROFIT, REVENUE,
CONTRACTS OR SAVINGS, OR ANY OTHER
DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF
YOUR USE OF OR INABILITY TO USE THIS
INFORMATION, ANY DEFECT IN THE
INFORMATION, OR THE BREACH OF THESE
TERMS OR CONDITIONS, WHETHER IN AN
ACTION IN CONTRACT OR TORT OR BASED ON
A WARRANTY, EVEN IF NIKON OR ITS
LICENSORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Some States,
Territories and Countries do not allow certain
liability exclusions or damages limitations, so to
that extent the above may not apply to you.
USER LICENSE AGREEMENT FOR LOCATION NAME DATA
Technical Notes and Index
Export Control. You agree not to export from
anywhere any part of the Data or any direct
product thereof except in compliance with,
and with all licenses and approvals required
under, applicable export laws, rules and
regulations, including but not limited to the
laws, rules and regulations administered by the
Office of Foreign Assets Control of the U.S.
Department of Commerce and the Bureau of
Industry and Security of the U.S. Department of
Commerce.
To the extent that any such export laws, rules or
regulations prohibit Nikon and its licensors
from complying with any of its obligations
hereunder to deliver or distribute Data, such
failure shall be excused and shall not constitute
a breach of this Agreement.
Entire Agreement. These terms and conditions
constitute the entire agreement between
Nikon (and its licensors, including their
licensors and suppliers) and you pertaining to
the subject matter hereof, and supersedes in
their entirety any and all written or oral
agreements previously existing between us
with respect to such subject matter.
Governing Law. The above terms and
conditions shall be governed by the laws of the
Japan, without giving effect to (i) its conflict of
laws provisions, or (ii) the United Nations
Convention for Contracts for the International
Sale of Goods, which is explicitly excluded;
provided that in the event that the laws of the
Japan is not deemed applicable to this
Agreement for any reason in the country where
you obtained the Data, this Agreement shall be
governed with the laws of the country where
you obtained the Data. You agree to submit to
the jurisdiction of Japan for any and all
disputes, claims and actions arising from or in
connection with the Data provided to you
hereunder.
F16
Government End Users. If the Data supplied by
NAVTEQ is being acquired by or on behalf of
the United States government or any other
entity seeking or applying rights similar to
those customarily claimed by the United States
government, the Data is a "commercial item" as
that term is defined at 48 C.F.R. ("FAR") 2.101, is
licensed in accordance with the End-User
Terms under which this Data was provided, and
each instruction manual accompanying the
Client device containing a copy of the Data
delivered or otherwise furnished shall be
marked and embedded as appropriate with the
following "Notice of Use," and shall be treated
in accordance with such Notice:
Notice of Use
Contractor (Manufacturer/ Supplier) Name:
NAVTEQ
Contractor (Manufacturer/Supplier)
Address:
c/o Nokia 425 West Randolph Street,
Chicago, Illinois 60606
This Data is a commercial item as defined in
FAR 2.101 and is subject to the End-User
Terms under which this Data was provided.
© 2012 NAVTEQ - All rights reserved.
If the Contracting Officer, federal government
agency, or any federal official refuses to use the
legend provided herein, the Contracting
Officer, federal government agency, or any
federal official must notify NAVTEQ prior to
seeking additional or alternative rights in the
Data.
USER LICENSE AGREEMENT FOR LOCATION NAME DATA
Notices related to licensed software copyright holders.
• Location name data for Japan
© 2012 ZENRIN CO., LTD. All rights reserved.
This service uses POI data of ZENRIN CO., LTD.
“ZENRIN” is a registered trademark of ZENRIN CO., LTD.
• Location name data except for Japan
© 1993-2012 NAVTEQ. All rights reserved.
NAVTEQ Maps is a trademark of NAVTEQ.
Austria
© Bundesamt für Eich- und Vermessungswesen
Croatia
Cyprus
Estonia
Latvia
Lithuania
Moldova
Poland
Slovenia
Ukraine
© EuroGeographics
France
source: © IGN 2009 - BD TOPO
Germany
"Die Grundlagendaten wurden mit Genehmigung der zuständigen
Behörden entnommen"
Great Britain
Contains Ordnance Survey data © Crown copyright and database right
2010
Contains Royal Mail data © Royal Mail copyright and database right 2010
Greece
Copyright Geomatics Ltd.
Hungary
Copyright © 2003; Top-Map Ltd.
Italy
La Banca Dati Italiana è stata prodotta usando quale riferimento anche
cartografia numerica ed al tratto prodotta e fornita dalla Regione
Toscana.
Norway
Copyright © 2000; Norwegian Mapping Authority
Portugal
Source: IgeoE - Portugal
Spain
Información geográfica propiedad del CNIG
Sweden
Based upon electronic data © National Land Survey Sweden.
®
Technical Notes and Index
F17
USER LICENSE AGREEMENT FOR LOCATION NAME DATA
Switzerland
Topografische Grundlage: © Bundesamt für Landestopographie
Canada
This data includes information taken with permission from Canadian
authorities, including © Her Majesty, © Queen’s Printer for Ontario, ©
Canada Post, GeoBase , © Department of Natural Resources Canada. All
rights reserved.
Mexico
Fuente: INEGI (Instituto Nacional de Estadística y Geografía.)
United States
© United States Postal Service 2012. Prices are not established,
controlled or approved by the United States Postal Service . The
following trademarks and registrations are owned by the USPS: United
States Postal Service, USPS, and ZIP+4.
Australia
Copyright. Based on data provided under license from PSMA Australia
Limited (www.psma.com.au).
Product incorporates data which is © 2012 Telstra Corporation Limited,
GM Holden Limited, Intelematics Australia Pty Ltd and Continental Pty
Ltd.
Nepal
Copyright © Survey Department, Government of Nepal.
Sri Lanka
This product incorporates original source digital data obtained from the
Survey Department of Sri Lanka
© 2009 Survey Department of Sri Lanka
The data has been used with the permission of the Survey Department of
Sri Lanka
Israel
© Survey of Israel data source
®
®
®
Technical Notes and Index
Jordan
“© Royal Jordanian Geographic Centre”.
Mozambique
Certain Data for Mozambique provided by Cenacarta © 2012 by
Cenacarta
Réunion
source: © IGN 2009 - BD TOPO
Ecuador
INSTITUTO GEOGRAFICO MILITAR DEL ECUADRO AUTORIZACION N° IGM2011-01- PCO-01 DEL 25 DE ENERO DE 2011
Guadeloupe
source: © IGN 2009 - BD TOPO
Guatemala
Aprobado por el INSTITUTO GEOGRAFICO NACIONAL - Resolución del
IGN N° 186-2011
French Guiana
source: © IGN 2009 - BD TOPO
Martinique
source: © IGN 2009 - BD TOPO
Mexico
F18
®
®
®
®
Fuente: INEGI (Instituto Nacional de Estadística y Geografía)
Specifications
Nikon COOLPIX P520 Digital Camera
Type
Number of effective
pixels
Image sensor
Lens
Focal length
f/-number
Construction
Digital zoom
magnification
Vibration reduction
Motion blur reduction
Autofocus (AF)
Focus range
Focus-area selection
Viewfinder
Monitor
Frame coverage
(shooting mode)
Frame coverage
(playback mode)
Storage
Media
File system
File formats
18.1 million
1/2.3-in. type CMOS; approx. 18.91 million total pixels
NIKKOR lens with 42× optical zoom
4.3-180 mm (angle of view equivalent to that of 24-1000 mm
lens in 35mm [135] format)
f/3-5.9
14 elements in 10 groups (4 ED lens elements)
Up to 2× (angle of view equivalent to that of approx. 2000 mm lens
in 35mm [135] format)
Lens shift
Motion detection (still pictures)
Contrast-detect AF
• [W]: Approx. 50 cm (1 ft 8 in.) - ,
[T]: Approx. 2.0 m (6 ft 7 in.) - 
• Macro close-up mode: Approx. 1 cm (0.4 in.) (at a wide-angle
zoom position) - 
(All distances measured from center of front surface of lens)
Face priority, auto (9-area automatic selection), center (wide,
normal), manual with 99 focus areas, subject tracking, target
finding AF
Electronic viewfinder, 0.5 cm (0.2-in.) approx. 201k-dot equivalent
LCD with the diopter adjustment function (-4 to +4 m-1)
Approx. 100% horizontal and 100% vertical (compared to
actual picture)
Approx. 100% horizontal and 100% vertical (compared to
actual picture)
8 cm (3.2-in.), approx. 921k-dot, wide viewing angle TFT LCD
with anti-reflection coating and 5-level brightness adjustment,
Vari-angle TFT LCD
Approx. 100% horizontal and 100% vertical (compared to
actual picture)
Approx. 100% horizontal and 100% vertical (compared to
actual picture)
Internal memory (approx. 15 MB)
SD/SDHC/SDXC memory card
DCF, Exif 2.3, DPOF, and MPF compliant
Still pictures: JPEG
3D images: MPO
Sound files (voice memo): WAV
Movies: MOV (Video: H.264/MPEG-4 AVC, Audio: AAC stereo)
F19
Technical Notes and Index
Frame coverage
(shooting mode)
Frame coverage
(playback mode)
Compact digital camera
Specifications
Image size (pixels)
• 18 M
• 4M
• VGA
• 16:9 2M
• 1:1
ISO sensitivity
(Standard output
sensitivity)
• ISO 80 - 1600
• ISO 3200, Hi 1 (equivalent to ISO 6400) (available when using
j, k, l or m mode)
• ISO Hi 2 (equivalent to ISO 12800) (available when using
High ISO monochrome in special effects mode)
Exposure
Metering mode
Exposure control
Shutter
Speed
Technical Notes and Index
Aperture
Range
Self-timer
Flash
Range (approx.)
(ISO sensitivity: Auto)
Flash control
Flash exposure
compensation
Interface
Data transfer protocol
Video output
HDMI output
I/O terminal
GPS
Supported languages
F20
4896×3672
2272×1704
640×480
1920×1080
3672×3672
• 8M
• 2M
• 16:9 13M
• 3:2
3264×2448
1600×1200
4864×2736
4896×3264
Matrix, center-weighted, or spot.
Programmed auto (with flexible program), shutter priority
auto, aperture-priority auto, manual, exposure bracketing,
exposure compensation (-2.0 EV - +2.0 EV in steps of 1/3 EV)
Mechanical and CMOS electronic shutter
• 1/4000 * - 1 s
• 1/4000 * - 8 s (when ISO sensitivity is fixed at 80 or 100 in j,
k, l or m mode mode)
* When the aperture value is set between f/6.6 and f/8.3 at the
wide-angle end.
Electronically-controlled 6-blade iris diaphragm
10 steps of 1/3 EV (W) (l, m mode)
Durations of 2 or 10 seconds can be selected
[W]: 0.5 - 8.0 m (1 ft 8 in. - 26 ft)
[T]: 1.5 - 4.5 m (5 - 14 ft)
TTL auto flash with monitor preflashes
In steps of 1/3 EV in the range between -2 and +2 EV
Hi-Speed USB
MTP, PTP
Can be selected from NTSC and PAL
Can be selected from Auto, 480p, 720p, and 1080i
• Audio/video output; digital I/O (USB)
• HDMI mini connector (Type C) (HDMI output)
Receiver frequency 1575.42 MHz (C/A code), geodetic system
WGS 84
Arabic, Bengali, Chinese (Simplified and Traditional), Czech,
Danish, Dutch, English, Finnish, French, German, Greek, Hindi,
Hungarian, Indonesian, Italian, Japanese, Korean, Marathi,
Norwegian, Persian, Polish, Portuguese (European and
Brazilian), Romanian, Russian, Spanish, Swedish, Tamil, Telugu,
Thai, Turkish, Ukrainian, Vietnamese
Specifications
Power sources
Charging time
Battery life (Still pictures)*
Tripod socket
Dimensions
(W × H × D)
Weight
Operating environment
Temperature
Humidity
• One Rechargeable Li-ion Battery EN-EL5 (included)
• AC Adapter EH-62A (available separately)
Approx. 4 h and 30 min (when using Charging AC Adapter
EH-69P and when no charge remains)
Approx. 200 shots when using EN-EL5
1/4 (ISO 1222)
Approx. 125.2 × 84.1 × 101.6 mm (5.0 × 3.4 × 4.0 in.)
(excluding projections)
Approx. 550 g (1 lb 3.5 oz) (including battery and SD memory
card)
0°C - 40°C (32°F - 104°F)
85% or less (no condensation)
• Unless otherwise stated, all figures assume a fully-charged battery and an
ambient temperature of 23 ±3°C (73.4 ±5.4°F) as specified by the Camera and
Imaging Products Association (CIPA).
* Figures based on the Camera and Imaging Products Association (CIPA) standards for
measuring the endurance of camera batteries. Performance for still pictures measured
under the following test conditions: Normal selected for Image quality, r 4896×3672
selected for Image size, zoom adjusted with each shot, and flash fired with every other shot.
The values may vary depending on operating conditions such as the interval between
shots and the length of time menus and images are displayed.
Technical Notes and Index
F21
Specifications
Rechargeable Li-ion Battery EN-EL5
Type
Rechargeable lithium-ion battery
Rated capacity
DC 3.7 V, 1100 mAh
Operating temperature
0°C - 40°C (32°F - 104°F)
Dimensions
(W × H × D)
Approx. 36 × 54 × 8 mm (1.4 × 2.1 × 0.3 in.)
Weight
Approx. 30 g (1.1 oz) (excluding terminal cover)
Charging AC Adapter EH-69P
Rated input
AC 100-240 V, 50/60 Hz, 0.068-0.042 A
Rated output
DC 5.0 V, 550 mA
Operating temperature
0°C - 40°C (32°F - 104°F)
Dimensions
(W × H × D)
Approx. 55 × 22 × 54 mm (2.2 × 0.9 × 2.2 in.) (excluding plug
adapter)
For Argentina: Approx. 55 × 59 × 63 mm (2.2 × 2.4 × 2.5 in.)
For Korea: Approx. 55 × 59 × 66.5 mm (2.2 × 2.4 × 2.7 in.)
Weight
Approx. 55 g (2.0 oz) (excluding plug adapter)
For Argentina and Korea: Approx. 80 g (2.9 oz)
B Specifications
• Nikon will not be held liable for any errors this manual may contain.
• The appearance of this product and its specifications are subject to change without notice.
Supported Standards
Technical Notes and Index
• DCF: Design Rule for Camera File System is a standard widely used in the digital
camera industry to ensure compatibility among different makes of camera.
• DPOF: Digital Print Order Format is an industry-wide standard that allows
pictures to be printed at a digital photo lab or with a household printer from
print orders stored on the memory card.
• Exif version 2.3: This camera supports Exif (Exchangeable Image File Format
for Digital Still Cameras) version 2.3, a standard that allows information stored
with photographs to be used for optimal color reproduction when images are
output from Exif-compliant printers.
See the instruction manual of the printer for further details.
• PictBridge: A standard developed cooperatively by the digital camera and
printer industries, allowing photographs to be output directly to a printer
without connecting the camera to a computer.
F22
Specifications
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal and
non-commercial use of a consumer to (i) encode video in compliance with the AVC
standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a
consumer engaged in a personal and non-commercial activity and/or was
obtained from a video provider licensed to provide AVC video. No license is granted
or shall be implied for any other use. Additional information may be obtained from
MPEG LA, L.L.C.
See http://www.mpegla.com.
FreeType License (FreeType2)
Portions of this software are copyright © 2013 The FreeType Project
("www.freetype.org"). All rights reserved.
MIT License (Harfbuzz)
Portions of this software are copyright © 2013 The Harfbuzz Project ("http://
www.freedesktop.org/wiki/Software/HarfBuzz"). All rights reserved.
Trademark Information
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi
Alliance.
• All other trade names mentioned in this manual or the other documentation
provided with your Nikon product are trademarks or registered trademarks of
their respective holders.
F23
Technical Notes and Index
• Microsoft, Windows and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
• Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc., registered in the
U.S. and other countries. The iFrame logo and the iFrame symbol are trademarks
of Apple Inc.
• Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
• SDXC, SDHC and SD Logos are trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Index
Symbols
Technical Notes and Index
R 45, E7
l Aperture-priority auto mode 49, 51
k Apply selection button 5
A Auto mode 26, 35
W Backlighting mode 38
l Delete button 33, E9, E56
s Display button 9
o Exposure compensation 55, 64
m Flash mode 55, 56
m (flash pop-up) button 56
p Focus mode 55, 62
w Function button 4, 71
c Landscape mode 38
m Manual mode 49, 51
d Menu button 10, 67, 84, 96, 101,
103
b (e movie-record) button 92
X Night landscape mode 37
c Playback button 4, 32
i Playback zoom 82
j Programmed auto mode 49, 51
y Scene mode 36
n Self-timer/Smile timer 55, 59, 60
k Shutter-priority auto mode 49, 51
u Special effects mode 47
g Tele 29
h Thumbnail display 83
M User settings mode 53
f Wide 29
.JPG E90
.MOV E90
.MPO E90
.WAV E90
Numerics
3D photographys 45
A
AC adapter 18, 19, E92
Active D-Lighting 69, E46
AF area mode 69, E40
F24
AF assist 104, E71
A-GPS file 101, E59
Aperture value 49
Aperture-priority auto mode 49, 51
Assign Side Zoom Control 4, 29
Assign side zoom control 104
Audio/video cable 87, E17
Audio/video-in jack 87, E17
Auto 57
Auto off 23, 104, E73
Auto with red-eye reduction 57, 58
Autofocus 63, 69, 96, E44, E51
Autofocus mode 69, 96, E44, E51
AV cable 87, E17
B
Backlighting 38
Battery 16, 18
Battery charger 19, E92
Battery level indicator 22
Battery-chamber/memory card slot cover
16, 20
Beach Z 40
Best shot selector 42, 68, E34
Black and white copy n 42
Blink warning 106, E79
BSS 42, 68, E34
Button sound 104, E73
C
Calendar display 83
Charge by computer 105, E76
Charger 19, E92
Charging AC Adapter 18
Choose key picture 85, E58
Close-up k 41
Command dial 3, 5, 49
Computer 87, 90
Continuous 68, E34
Contrast E28
COOLPIX Custom Picture Control 68,
E30
Index
COOLPIX Picture Control E68, E26
Create log 102, E61
Crop E16, E24
Custom Picture Control 68, E30
D
Date and time 24, E65
Daylight saving time 24, E66
Delete 33, 97, E9, E56
Digital zoom 29, 104, E71
Diopter adjustment control 8
Direct Print 87, E19
D-Lighting 84, E12
DPOF printing E22
DSCN E90
Dusk/dawn i 41
Focus area 30, E40
Focus lock 81
Focus mode 55, 62
Folder name E91
Food u 42
Format 20, 105, E74
Format the internal memory 105, E74
Format the memory card 20, 105, E74
FSCN E90
Full-frame playback 32
Full-time AF 69, 96, E44, E51
G
GPS 98
GPS options 101, E59
GPS options menu 101, E59
E
H
Easy panorama 43, E3
Editing movies E24
Editing Pictures E10
Exposure bracketing 69, E39
Exposure compensation 55, 64
Exposure mode 49
Extension E90
Extracting still pictures 97, E25
Eye-Fi upload 106, E80
Eyelet for camera strap 6
HDMI 87, 105, E17, E75
HDMI 3D output E75
HDMI device control E75
HDMI mini connector 87, E17
HDR 38
High-speed continuous 68, E34
HS movie 95, E49, E51
Face detection 80
Face priority 69, E40
Fast motion movies 95, E51
Features not available in combination 75
File name E90
Fill flash 57
Filter effects 84, E14, E28
Fireworks show m 42
Firmware version 106, E84
Flash 56
Flash exp. comp. 69, E45
Flash mode 55, 56
Fn button 71
Focal length 69, E47, F19
Focus 30, E40, E44, E51
Identifier E90
Image copy 85, E57
Image quality 72
Image sharpening E28
Image size 72, 73
Infinity 63
Internal memory indicator 22
Interval Timer Shooting 68, E35, E36
ISO sensitivity 69, E38
L
Landscape mode 38
Language 105, E74
Lens F6, F19
Lens cap 6
Li-ion rechargeable battery 16
M
Macro close-up 63
F25
Technical Notes and Index
F
I
Index
Manual focus 63, E2
Manual mode 49, 51
Memory capacity 22
Memory card 20, 21
Memory card slot 20
Metering 68, E33
Microphone 92, E56
Minimum shutter speed E38
Mode dial 26
Monitor 7, 9, 12, F6
Monitor brightness 103, E67
Monitor settings 103, E67
Motion detection 104, E70
Movie length 92, E50
Movie menu 96, 48
Movie options 96, E48
Movie playback 97
Movie recording 92
Multi selector 3, 5, 49, 55
Multi-shot 16 68, E35
Museum l 42
Points of Interest (POI) 100, 101, E60
Portrait b 39
Power 22, 23, 24
Power switch/power-on lamp 23
Preset manual E32
Pre-shooting cache 68, E34, E36
Pressing halfway 3, 30
Print E19, E20, E21
Print date 103, E68
Print order 84, E52
Print order date option E53
Printer 87, E19
Programmed auto mode 49, 51
Protect 84, E55
Q
Quick adjust E28
Quick retouch 84, E12
R
Optical zoom 29
Optional accessories E92
Rear-curtain sync 57
Rechargeable battery 16, E92
Record GPS data 98
Recording slow motion movies 95, E51
Reset all 106, E81
Reset file numbering 105, E78
Reset user settings 54, 69
Reverse indicators 106, E80
Rotary multi selector 3, 5, 49, 55
Rotate image 84, E55
RSCN E90
P
S
Panorama assist 43, E6
Panorama p 43
Paper size E23
Party/indoor f 40
Pet portrait O 44
Photo info 103
PictBridge 87, E19, F22
Picture Control 68, E26
Playback 32, 97, E56
Playback menu 84, E52
Playback mode 32
Playback zoom 82
Saturation E28
Save user setting 53, 69
Scene auto selector x 39
Scene mode 36
Selecting pictures 86
Self-timer 55, 59
Self-timer lamp 59
Sequence 32, E8
Sequence display options 85, E58
Setup menu 103, E64
Shooting 26
Shooting date information 9, 12
N
Night landscape mode 37
Night portrait e 40
Noise reduction filter 69, E45
Number of exposures remaining 22, 74
O
Technical Notes and Index
F26
Index
Shooting menu 67, E26
Shooting mode 27
Shutter sound 104, E73
Shutter speed 49, 78
Shutter-priority auto mode 49, 51
Shutter-release button 3, 5, 30
Single 68, E34
Single AF 69, 96, E44, E51
Skin softening 46, 84, E13
Slide show 84, E54
Slow sync 57
Small picture 84, E15
Smile timer 55, 60
Snow z 40
Sound settings 104, E73
Special effects mode 47
Sports d 40
SSCN E90
Startup zoom position 69, E47
Sub-command dial 49
Subject tracking 69, E41, E43
Sunset h 41
Switching between tabs 11
Synchronize 102, E63
V
Vibration reduction 104, E69
Video mode 105, E75
View grid E27
View log 102, E63
View/hide framing grid 12, 103, E67
View/hide histograms 15, 103, E67
Viewfinder 8
ViewNX 2 88
Voice memo 85, E56
Volume 97
W
Welcome screen 103, E64
White balance 68, E31
Wide 29
Z
Zoom 29
Zoom control 3, 4, 29
Zoom memory 69, E47
T
Technical Notes and Index
Target finding AF 69, 79, E42
Tele 29
Thumbnail playback 83
Time difference E66
Time zone 24, E66
Time zone and date 24, 103, E65
Toggle Av/Tv selection 105, E78
Tone level 15
Tone level information 9, 15, E67
Toning E29
TV settings 105, E75
U
USB cable 87, 90, E19
USB/Audio video connector 87, 90,
E17, E19
User setting modes 53
F27
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
FX3A03(11)
6MN07111-03
">