ZANUSSI WTJ1173V User Manual

ZANUSSI
WASHER DRYER
WTJ 1173 V
INSTRUCTIONS MANUAL
129 6957 01
CONTENTS
For the user
Safety instructions
For the installer
4/5
Technical information
19
Description of the appliance
6
Installation
Use of your appliance
7
Unpacking
19
Operating instructions
8/9
Installation
20
Programmes chart
10/11
Levelling
20
Hints & Tips
12-14
Moving of the appliance
20
Cleaning and maintenance
If something doesn't work
Service
15
16/17
Water connection
Electrical connection
20/21
21
18
Guide to use the instruction
The following symbols will be found in the text to guide you
throughout the instructions :
Safety instructions
Hints and tips
Environmental information
3
SAFETY INSTRUCTIONS
You must read the whole of this instruction book
before you use the appliance. Follow the advice
carefully. Keep the book for future reference. If
you sell or give away the appliance, make sure
that the book is passed to the new owner.
The following warnings are provided in the interest
of overall safety. You must read them before the
appliance is installed or used.
Use
This appliance is designed to be used by
adults. Children should not be allowed to touch
the controls or play with the product.
It is dangerous to modify the specifications of
this appliance in any way.
Always unplug the appliance and turn off the
water after use.
Only wash fabrics with are designed to be
machine washed. If in doubt, follow the instructions you find on the label of the item itself.
Place small metal rings or edged plastic rings
in a net or bag.
Make sure that all pockets are empty. Hard,
sharp objects such as coins, safety pins, nails,
screws or stones can cause extensive damage.
Do not machine wash fabrics which are
saturated with petroleum products. If volatile
cleaning fluids have been used, make sure
that they are thoroughly removed from the
fabrics before they are placed in the appliance.
Small and delicate objects (e.g. baby socks,
stockings) can be easily washed inside a small
pillowcase with a zip fastener or in larger
socks.
Use only the recommended quantities of fabric
conditioner.
Before cleaning, care and maintenance, ensure
that the machine is unplugged.
Installation
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Make sure that the appliance does not stand
on its electrical supply cable.
This appliance is heavy. Care should be taken
when moving it.
All packaging and transit bolts must be removed
before the appliance is used. Serious damage
may occur if this is not done.
If your washing machine is in a room subject to
temperatures below freezing, the water must
be removed from the machine. So, the
danger of freezing should be expected.
The machine becomes very hot during the
drying cycle. Keep children away from the
vicinity of the appliance while it is in operation.
Read all instructions before using
the appliance and save them for
future reference.
4
Safeties
Lid : your washing machine is equipped with
a safety avoiding the switching of the appliance
when the flapdoors of the drum are opened ;
the closure of the lid is so impossible. An
electromechanic safety prohibits the opening
of the lid when the washing machine works and
2 minutes after the end of the programme.
When disposing of the machine in a proper
manner, destroy the door lock and cut off the
power supply cord.
Washing motor : in case of mechanic
overloading, overvoltage, a thermic safety
protects automatically the motor.
Heating : the heating can only begin when
the water quantity necessary for the washing
is in the tub. This safety is useful when there is
a water break-up or if you forget to open the
water inlet hose.
Environmental information
All materials marked by the symbol
are
biodegradable. They can be disposed of without
danger or burnt in rubbish incinerators.
In order to realize water and energy savings and
to act in an environmentally conscious manner,
we advice to follow the below instructions :
- use if possible the appliance with full loads
instead of partial loads. Take care to do not
overload the drum.
- Use only the programmes with prewash for very
soiled laundry.
- Savings on detergent and for the environment
may also be achieved if with medium to hard
water you add sufficient detergent for soft water
and then add separately a softener. This relieves
our waters of a certain amount of chemicals.
5
DESCRIPTION OF THE APPLIANCE
Timer
Spinning speed variator
Drying selector
Control panel
Temperature selector
Pushbuttons
Light
Lid
Handle for opening lid
Lever for castors
Trap door for lint filter
Detergent dispenser
Symbols
( ) Washing powder for programmes with
prewash (1).
( ) Washing powder for the main wash (2).
( ) Liquid additives (fabric softener and
conditioner...) (3).
( ) Bleach compartment (4).
If you wish to use liquid detergent :
- choose a programme without prewash
- put the measuring ball directly into the drum.
In any case, when the wash is made with a liquid
detergent in a ball-type packaging, it is necessary
to take away the packaging before drying the
laundry.
6
USE OF YOUR APPLIANCE
The control panel
Never turn the programme selector when the appliance is working.
WTJ 1173 V
AUTO
1 2 34
5
6
7
8
1 ON/OFF pushbutton " "
6 Spinning speed variator
Press the ON/OFF pushbutton, the programme
starts: the power control lamp lights on.
It enables to select the spinning speed of your
washing machine from 650 to 1100 rpm for cotton
programmes and from 650 to 850 rpm for
synthetics programmes. Thus, you can choose
the spinning speed suiting best to the nature of
your laundry and to the degree of humidity wished
at the end of the wash.
2 Power control lamp
By pressing the ON/OFF pushbutton, the programme starts and this control lamp lights on.
3 Extra rinse pushbutton " "
This pushbutton is active on cotton and synthetics
programmes. It increases the quantity of water
during the rinses.
4 Auto dry pushbutton
If you do a wash of an half-load, press in this
pushbutton and then select the chosen drying
time, before starting the wash programme. In this
way, your machine will automatically carry out the
drying programme at the end of the wash programme. If you do a wash of a complete wash
load (5kg of cottons or 2,5 kg of synthetics), it is
necessary to dry the laundry in two times, so do
not use this pushbutton.
5 Temperature selector
Choose the temperature between cold ( ) and
90°C which corresponds to the chosen programme, with the help of the indications of the
programme table, according to the fibers and the
fastness of the colours.
7 Programme selector
It enables to select the most adapted programme
to the nature and degreees of soil of your laundry.
Turn the programme selector clockwise to select
the chosen programme.
The programme selector indicates each programme phase as it takes place.
At the end of the programme, the appliance stops
automatically on a position off "I".
Never turn the programme selector anticlockwise.
8 Drying time selector
Graduated up to 120 minutes for cottons and
synthetics, it enables to select the drying time
according to the nature and the quantity of laundry
to dry, and to the drying results wished (see the
control panel of your washer-dryer).
Never turn the drying selector anticlockwise.
7
OPERATING INSTRUCTIONS
1. Place the laundry in the drum
lift up the lid of the machine.
open the drum with your two hands by pressing
the button A and the two flapdoors till they
disengage.
introduce the laundry into the drum ; close the
drum and the lid of the machine.
Be careful : before closing the lid of your machine, make sure that the drum flapdoors are
correctly closed :
the two flapdoors fastened,
the button A pressed out.
2. Measure out the detergent
Measure out the amount of detergent
recommended by the manufacturer in the main
wash compartment ( ).
If you wish to carry out a prewash, pour the
amount required into the prewash compartment
( ).
Do not exceed the MAXI level.
3. Add the bleach agent, if required
You may use a bleach agent in all the washing
programmes. However, make sure that the fabric
withstands the treatment. Bleach is automatically
washed down into the drum. Pour 1/4 to 1 glass
of 12° chl bleach into compartment marked ( )
before switching the machine on.
Make sure that the level of the liquid never
exceeds the MAXI level.
4. Add the fabric softener
Pour the softener, if required, into the compartment
marked ( ). Do not exceed the MAXI level.
5. Press the supplementary
pushbuttons if required.
8
A
6. Select the temperature
Choose the temperature which corresponds to
the chosen programme.
7. Select the spinning speed
Choose the spinning speed suiting best to the
nature of your laundry and to the degree of
humidity wished at the end of the wash.
8. Select the programme
Choose the programme according to the nature
and the degree of soil of the laundry.
Turn the programme selector clockwise to select
the chosen programme.
9. Select the drying time if required
Choose the drying time according to the nature
of the laundry and to the drying results wished
(see control panel).
10. Starting of the programme
The ON/OFF pushbutton " " enables to switch
on your machine. The control lamp lights on and
the programme begins.
11. At the end of the programme
When the selected programme is over, the machine stops automatically. The timer knob stops
on a position "I" for all the programmes.
After each wash, depress the on/off pushbutton.
Press off the pushbuttons if necessary ; unplug
the machine from the wall socket ; turn off the
water tap.
9
PROGRAMMES CHART
Programmes for cotton/linen
Maximum loads : 5 kg (2,5 kg for drying)
Programmes
description
Temperatures Detergent
(°C)
dispensers
to use
1
Prewash
60-90
2
White
60-90
3
4
Short programme
40-60
5
Spinning
6
Drying
Water
consumption
in liters
*
Time
in minutes
88
170
65
150
60
125
45
55
0
12
*
3 rinsings
*
see control panel
(*) If the laundry can withstand the bleaching treatment.
When the selected programme is over, the washing machine stops automatically. The timer knob stops
on the position "I" for the cotton and linen programmes after a spinning or a drying phase.
BE CAREFUL :
THE LID CAN ONLY BE OPENED 90 SECONDS AFTER THE MACHINE HAS STOPPED.
10
PROGRAMMES CHART
Programmes for synthetics/delicates/wool
Maximum loads : 2,5 kg (drying : 1,5 kg) for synthetics / 1 kg for wool.
Programmes
description
Temperatures Detergent
(°C)
dispensers
to use
Water
consumption
in liters
Time
in minutes
7
Prewash
30-60
68
135
8
Synthetics
30-60
52
115
9
10
Short programme
30-40
52
90
3 rinsings
32
40
11
Drying
see control panel
12
Wool
-40
65
60
13
Delicate
-40
60
55
14
3 rinsings
45
25
15
Rinsing
15
15
16
17
Short spinning
0
10
Drain
0
2
When the selected programme is over, the washing machine stops automatically. The timer knob stops
on a position "I" after a short spinning or a drying phase.
BE CAREFUL :
THE LID CAN ONLY BE OPENED 90 SECONDS AFTER THE MACHINE HAS STOPPED.
11
HINTS AND TIPS
Washing hints
You are advised not to leave your laundry too
long, especially when damp. Damp laundry
produces moult and unpleasant smells.
Moult stains cannot be removed.
Sort your laundry.
Study carefully the chart in this booklet explaining
the symbols used on clothes labels (see page
13).
The following points are particularly important :
- a line under the bowl means that the garment
cannot be washed using programmes for resistant
fabrics such as cotton and linen;
- do not mix coloured garments with whites;
- anticrease materials like polyester/cotton should
be treated as synthetics;
- non-resistant fabrics like acrylic and most curtain
materials should be treated as delicate fabrics;
- the wool programme is designed specifically for
pure new wool. Other types of wool and wool
mixtures may shrink or felt if machine-washed.
Woollen garments should be spun briefly
immediately after washing.
Prewash
Prewash is not normally necessary. Your new
washing machine combined with modern
detergents will give perfect washing results without
prewash, thus saving energy, time, water and
detergent.
However, when the laundry is particularly dirty
(for example if you have to wash mechanics'
overalls or butchers' aprons), you are advised to
use prewash with a biological detergent.
Temperatures
We suggest that white cotton and linen, if it is not
excessively soiled, can be washed at 60° instead
of 95°C. There should be no reduction in performance, but there will be an energy saving of
approximately 30%.
The same applies to a lesser extent to fast
coloured garments.
They usually require a temperature of 60°C but if
they are not excessively dirty, you will have
satisfactory results at 40°C.
Garments with non-fast colours should not be
washed at temperatures above 40°C. If fast and
non-fast colours are washed together, they should
be treated as non-fast colours and therefore the
12
temperature should not exceed 40°C.
Resistant white and coloured synthetics can
normally be washed at 60°C but also in this case
40°C is sufficient if the laundry is not excessively
dirty.
Delicate synthetics, synthetics with non-fast
colours and woollen garments must never be
washed above 40°C.
As you already know, your washing machine can
also wash with cold water. However, it must be
remembered that the detergents currently on the
market have not been designed for cold washes
and that in winter, when the water is very cold,
they may not dissolve adequately.
We suggest the use of liquid detergents.
How much laundry can be washed in
one load?
Strictly speaking you should always weigh your
laundry.
The drum will take a maximum of 5 kg of cotton
and linen. For synthetics and delicate fabrics, the
maximum load is 2,5 kg and for wool, 1 kg.
As weighing can be complicated, we suggest you
estimate the weight according to how full the
drum is:
cotton and linen : drum full not too tighty packed
resistant synthetics : no more than 2/3 of the
drum
delicate fabrics and wool : no more than 1/2 of
the drum.
Before placing the laundry in the
machine:
- mend all tears, holes and ladders;
- secure loose buttons and close poppers and
zips;
- do not wash frayed garments - mend hems
before washing;
- remove all small objects from pockets. Nails,
pins, clips and similar objects can seriously
damage your washing machine and laundry;
- remove curtain hooks;
- wash coloured garments and in particular those
with non-fast colours separately when washing
for the first time. They are likely to lose colour the
first time they are washed.
- treat obstinate stains such as grass, rust, tar,
paint, ink etc. with a stain remover before washing.
To remove paint stains, for example, use a volatile substance such as turpentine: in this case,
you should wait for it to dry completely before
washing.
The manufacturer of your washing machine is not
responsible for any damage deriving from the use
of volatile, inflammable or toxic substances.
At the end of the washing
Damp laundry should be dried as soon as possible after finishing the wash.
Knitwear and woollens should be dried flat away
from direct sunlight.
Detergents and additives
Good washing results also depend on the choice
of detergent and use of the correct quantities to
avoid waste and protect the environment. Although
biodegradable, detergents contain substances
which in large quantities can damage the delicate
ecological balance of nature.
Always use good quality detergents suitable
for use in washing machines.
Follow the indications given by the detergent
manufacturer according to the weight of laundry,
the degree of soil and the hardness of the water
in your area; if you do not know how hard it is, ask
your local Water Authority.
Powder detergents
The washing powder should be placed in the
appropriate compartments of the dispenser
drawer before starting the programme. Special
detergents are availaible for coloured and delicate
fabrics and for wool.
Liquid detergents
It is possible to use a liquid detergent for main
wash phases if you use a ball-type packaging ball
and if you start the washing machine immediately
Liquid detergents can be used instead of powder
detergents particularly for lightly soiled laundry
and for medium or low temperature washing
programmes, while it is better to use a powder
detergent for high temperature washing
programmes.
Liquid additives
Any liquid additives for softening the laundry
of the
must be poured into the compartment
detergent dispenser drawer before starting the
programme.
The addition of water softener is particularly useful
when drying the clothes in a tumble dryer after
washing to avoid a static charge.
Make sure that the level of the liquid never
exceeds the MAXI level.
Bleach
You may use a bleach agent in all the washing
programmes. However, make sure that the fabric
withstands the treatment. Bleach is automatically
washed down into the drum. Pour 1/4 to 1 glass
of 12° chl bleach into compartment " " before
switching the machine on.
Make sure that the level of the liquid never
exceeds the MAXI level.
"Concentrated" powder detergents
Pour the concentrated powder detergent into the
main wash ( ) compartment.
Avoid selecting programmes including
prewash when concentrated detergents are
used.
Water hardness
Level
1
2
3
4
Characteristic
Soft
medium
hard
very hard
German degrees
°dH
m mol
0 - 7
8 - 14
15 - 21
> 21
0 - 1,3
1,4 - 2,5
2,6 - 3,8
> 3,8
French degrees
°T.H.
0 - 15
16 - 25
26 - 37
> 37
13
Wash code symbols
These symbols appear on fabric label, in order to help you choose the best way to treat your
laundry.
Strong wash
WASH
Max. wash
Max. wash
Max. wash
Max. wash
temperature 95°C temperature 60°C temperature 40°C temperature 30°C
Do not
wash
at all
Hand
wash
Delicate wash
BLEACHING
Do not bleach
Bleach in cold water
IRONING
Hot iron max. 200°C
DRY CLEANING
Dry cleaning
in all solvents
Warm iron max. 150°C
Lukewarm iron max. 110°C
Dry cleaning in
Dry cleaning in petrol, pure
perchlorethylene petrol,
alcohol, and R 113
pure alcohol, R 111 & R 113
Do not iron
Do not dry clean
high
temperature
low
temperature
DRYING
Flat
On clothes hanger
On the line
Symbols identification on the panel of your washer dryer :
: prewash detergent compartment
: wash detergent compartment
: soften detergent compartment
: spinning for cotton programmes (
)
: short spinning for synthetics programmes (
: draining
: wool symbol
: drying cycle
14
)
Tumble dry
Do not tumble dry
CLEANING AND MAINTENANCE
Make sure that the machine is unplugged and
the water tap turned off before undertaking any kind of maintenance.
Bodywork
The outside or the machine can be cleaned with
warm water and a neutral non-abrasive household
detergent. Wipe with clean water and dry after
cleaning.
Important : do not use methylated spirit, diluents
or similar products.
It is advisable, from time to time, to carry out a
complete cycle without a washing load, adding a
decalcifying product.
After the wash, leave the lid open for a while to
air the tub.
The detergent dispenser
Regularly clean the dispensers to clear out any
deposits. A long handled brush such as a bottle
brush will assist you in doing this.
The drain filter
Fig.1
The machine has got a mecanic filter located on
the front part to collect lint and small objects
(toothpins, coins, pins, etc.) inadvertently left in
the clothes. It is essential that this filter is cleaned
regularly.
Frequency of cleaning depends on the type of
articles washed (cleaning should be more frequent
if the articles have no hem and tend to fray).
Fig.2
To clean the filter proceed as follows :
Open the flap door pressing on its extreme left
(fig.1).
To take out the filter turn it handle anticlockwise
and then pull towards yourself (fig.3).
Clean the filter carefully and re-install it in its
original position introducing the cover of the filter
till the end making sure it is perfectly located, then
turn filter handle clockwise.
Fig.3
Note : Under the filter there is a retractable gutter
which makes it easier to collect any residual
water. Pull it out before remove the filter (fig.2).
15
IF SOMETHING DOESN'T WORK ?
Problems
Solutions
The wash results are not as usual
Check that :
was the wrong quantity or the wrong detergent
added ? Insufficient detergent leads to grey washes
and scale deposits in the machine. Check the
quantities more exactly.
were special stains pre-treated ?
were programme and temperature correctly
chosen ?
The washing cycle is very much too
long.
Check that :
the water pression is sufficient.
the pump filter is not obstructed.
there has not been a power breakdown.
The washing machine stops during a
washing cycle.
Check that :
the water pression is sufficient.
the pump filter is not obstructed.
the mains fuse is intact.
The machine does not start up
Check that :
the mains fuse is intact.
the appliance is plugged in.
the lid is firmly shut.
the programme selector dial is correctly positioned.
the beginning of the programme has been ordered
(on/off pushbutton pushed on).
there has not been a power breakdown.
The machine does not drain and/or does
not spin
Check that :
the drain hose is not squashed or bent.
the drain filter is not clogged.
The machine does not fill
Check that :
the inlet water hose is opened and the water
pression is sufficent.
the lid of the appliance is closed.
there has not been a breakwater.
The machine vibrates or is too noisy
Check that :
all the transit bolts and packing have been
removed.
all the feet resting firmly on the ground, the lock
nuts have been secured.
the machine does not touch something.
the load is sufficent.
16
IF SOMETHING DOESN'T WORK (continue)
Problem
Solutions
The machine empties as it fills
Check that :
the end of the drain hose is not too low.
There is water on the floor
Check that :
there is not too much detergent or unsuitable
detergent. The formation of foam can cause water
leaks.
one of the detergent dispenser is not obstructed.
the drain hose is well hanged.
if one of the joints or the tap leaking ? It is not
always easy to see as the leak often runs along the
hose.
is the drain filter cover properly closed ?
The drying results are not satisfying
Check that :
the selected drying time is not too short ; prolong
the drying time a little.
the drum is not overloaded ; reduce the load of
laundry.
the spin speed is not insufficient
the choice of the drying type is correct (cotton
drying programme or synthetic drying programme).
the draining pump is not clogged.
The drying is not homogeneous
Check that :
the load consists of textiles the nature of which is
too different, or the load is too important ; sort the
laundry load and dry the load in two times.
The laundry is not soft ; the synthetics are
full of static electricity
Check that :
you have not used softener during the wash
programme, or the laundry is overdried ; we advise
you to use a softener during the wash
The machine does not dry
Check that :
the programme has been correctly selected.
the water inlet tap is turned on.
the draining filter doesn't need to be cleaned.
17
SERVICE
If you have unable to identify or solve the problem,
consult our servicing depar tment. Before
telephoning, make a note of the make, model and
date of purchase of your machine : the service
department will require this information.
Data plate
You will find these informations on the data plate
of the appliance. It is placed in the internal of the
filter door.
18
FOR THE INSTALLER
Technical information
Dimensions
height with panel
height without panel
width
depth
Power supply voltage / frequency
Total power absorbed
Heater rating for washing
Heater rating for drying
Water pressure
minimum
maximum
Maximum load for washing : cotton
synthetics
wool
Maximum load for drying :
cotton
synthetics
Spinning speed
Electrical consumption (washing at 60°C)
895 mm
850 mm
450 mm
600 mm
220 V / 50 Hz
2200 W (10 A)
1950 W
1320 W
5 N/cm² (0,5 kg/cm2)
80 N/cm² (8 kg/cm2)
5 kg
2,5 kg
1 kg
2,5 kg
1,5 kg
1100 rpm
1,2 kWh
This appliance complies with the following EC Directive :
- 72/23/EEC of 19.02.1973 - Low-Voltage Directive
- 89/336/EEC of 03.05.1989 (including Amentment Directive 92/31/EEC) - EMV Directive.
Installation
Unpacking
Fig. 1
The parts protecting the inner components of
the machine during transit are red. They must
all be removed before using your machine for
the first time. These parts and their securing
means should be kept in case the machine
has to be transported again.
Unpack the appliance. Tilt the appliance
backwards. Give to one of the back corners a
quarter turn. The appliance comes free naturally
out the polystyrene basis. Take away this
basis (fig. 1).
Open the lid of the appliance and remove the
polystyrene wedge which blocks the drum.
Close the lid (fig. 2).
On the back part and with a spanner, remove
the two red loosened spacers (A) (fig. 3).
The holes which are now visible must be closed
with the plugs (B) provided with the appliance
(fig. 4). Do not forget to put the central cover.
Fig 3
Fig 5
A
Fig. 2
B
Fig 4
Fig 6
Please ensure that these parts have been
removed from the machine and keep them in
case of next transport (fig. 5).
If you want to keep the alignment of your
appliance with the adjacent cupboards, you
have the possibility to cut the crossbar holding
the hoses located at the back of your washerdryer machine (fig. 6).
19
The floor must be clean and dry, free from floor
polish and other greasy substances, so that the
machine does not slide about. Do not use any
grease as lubrification.
Installation on deep pile carpets and floor
coverings with foam backings is not recommended,
as the stability of the machine is no longer
guaranteed. If the installation must be done on a
carpeted floor, the openings located at the lower
part of the back of the appliance must remain
free. These openings ensure a good ventilation
of your appliance. In case of small format tiles,
place a standard rubber mat under the machine.
With sprung floors, in particular wooden plank
floors with yielding floor boards, screw down a
waterproof wooden base at least 15 mm thick,
across at least 2 floor boards. Wherever possible,
place the appliance in the corner of the room there wooden floors are most secure and least
liable to resonance vibrations.
Never compensate for small unevennesses in the
floor by placing wood, pasteboard or such like.
The front adjustable feet must be blocked after
installation of the appliance by means of the
locking nuts.
Levelling
It is essential that your machine is absolutely
level. Raise or lower the front feet of the machine;
tighten the nuts of the feet with an adjustable
wrench.
Also make sure that the machine does not touch
the wall, the furnitures etc. during the functioning.
This in order to avoid vibrations, noise or displacements of the appliance during operation.
Moving of the appliance
To move your washer dryer, put it on its wheels by
turning from the right to the left the special lever
situated at the bottom of the machine. Once the
machine placed at the chosen place, bring back
the lever to its initial position.
20
0,70 m mini
Installation
Water connection
Connect the water inlet hose to a cold water tap
with a 3/4" gas threaded orifice, after having
inserted the rugger sealing washer into the hose
collar. If the water connection is made onto new
pipes or onto pipes which have not been used for
a long time, it is advisable to run off a certain
amount of water before connecting the machine.
Place the curved end of the outled hose into a
drain pipe having a height between 70 and 100
cm from floor level or secure it to a sink or bath tub.
Make sure that the drain hose is firmly secured so
that it will not slip out or fall down from its position.
The water should drain freely and, consequently,
the drain hose should not be choked or placed in
such a way as to obstruct the normal water flow.
If an extension hose is required, remember that it
might cause a malfunction in the drain pump,
particularly if the extension has a length in excess
of 1 meter or if the diameter of the extension is
smaller than the diameter of the original drain
hose.
Electrical connection
Before you fit the plug into the wall socket, check
the following points :
1) The supply voltage of the domestic wiring
system does not fluctuate by more that 10%, plus
or minus, from 220 V.
2) The meter, the fuses, the supply line and the
wall socket are suitable to carry the maximum
load required by the machine (2,2 kW).
Very important :
The washing machine is provided with a
feeding wire with earth connection: it must be
connected to a plug like that is provided with
a good earth connection.
The manufacturer declines any responsibility
where the previous recommendations are not
followed.
21
129 6957 01