Pioneer VSX-LX503 Instruction manual

Instruction
Manual
VSX-LX503
AV RECEIVER
En
Table of contents
≫
Connections
≫
- Connecting Speakers
≫
Playback
≫
Setup
≫
Troubleshooting
≫
Appendix
≫
Supplementary Information
≫
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
What’s in the box
5
Part Names
6
Front Panel
6
Display8
Rear Panel
9
Remote Controller
11
Connecting an AV Component in a Separate Room
(Multi-zone Connection)
Connecting a TV (ZONE 2)
Connecting a Pre-main Amplifier (ZONE 2)
Connecting a Pre-main Amplifier (ZONE 3)
Connecting Antennas
Network Connection
Connecting External Control Devices
IR IN/OUT port
12V TRIGGER OUT jack
Connecting the Power Cord
Connections
Connecting speakers
13
Speaker Installation
14
Speaker Connections and "Speaker Setup" Settings 40
Connecting a Power Amplifier
57
Speaker combinations
58
Connecting the TV
59
To ARC TV
60
To Non-ARC TV
61
Connecting Playback Devices
62
Connecting an AV Component with HDMI Jack
Mounted62
Connecting an AV Component without HDMI Jack
Mounted63
Connecting an Audio Component
64
Connecting a Video Camera, etc.
65
Playback
66
66
67
68
69
70
71
71
72
73
AV Component Playback
75
Basic Operations
75
®
BLUETOOTH Playback
76
Basic Operations
76
Internet Radio
77
Playing Back
77
Spotify79
Playing Back
79
®
AirPlay 80
Basic Operations
80
®
DTS Play-Fi 81
2
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Listening Mode
Selecting a Listening mode
Listening Mode Effects
Selectable listening modes
Playing Back
81
TM
FlareConnect 82
Playing Back
82
USB Storage Device
83
Basic Operations
83
Device and Supported Format
85
Playing back files on a PC and NAS (Music Server)
86
®
Windows Media Player settings
86
Playing Back
87
Supported Audio Formats
90
Play Queue
91
Initial Setup
91
Adding Play Queue Information
91
Sort and Delete
92
Playing Back
92
Listening To the AM/FM Radio
93
Tuning into a Radio Station
93
Presetting a Radio Station
95
Using RDS (European, Australian and Asian models) 97
Multi-zone98
Switch remote control mode (ZONE 2)
99
Switch remote control mode (ZONE 3)
100
Playing Back
101
Setup
103
103
106
109
System Setup
115
Menu list
115
Menu operations
117
Input/Output Assign
118
Speaker122
Audio Adjust
127
Source128
Hardware129
Multi Zone
135
Miscellaneous
137
MCACC138
Menu operations
138
Full Auto MCACC
139
Manual MCACC
140
MCACC Data Check
142
Network/Bluetooth143
Menu operations
143
3
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Network144
Bluetooth
145
AV Adjust
147
Menu operations
147
Web Setup
149
Menu operations
149
Firmware Update
150
Updating Function on This Unit
150
Updating the Firmware via Network
151
Updating via USB
153
Initial Setup with Auto Start-up Wizard
155
Operations
155
Troubleshooting
When the unit is operating erratically
159
Troubleshooting160
Appendix
About HDMI
General Specifications
169
171
4
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
What’s in the box
1. Main unit (1)
2. Remote controller (RC-957R) (1), Batteries (AAA/R03) (2)
3. Speaker setup microphone (1)
• Used during Initial Setup.
4. Indoor FM antenna (1)
5. AM loop antenna (1)
6. Power cord (1)
• Quick Start Guide (1)
*This document is an online instruction manual. It is not included as an
accessory.
1
2
3
4
5
• Connect speakers with an impedance of 4 Ω to 16 Ω.
• The power cord must be connected only after all other connections are
completed.
• We will not accept any responsibility for damage arising from the connection
with equipment manufactured by other companies.
• Network services and content that can be used may no longer be available
if new functions are added by updating firmware or the service providers
terminate their services. Also, available services may differ depending on your
area.
• Details on the firmware update will be posted on our website and through
other means at a later date.
• Specifications and appearance are subject to change without prior notice.
6
5
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Part Names
Front Panel
1
2 345678
9
bk blbm bn
bo
cr
bp
bq br bs bt ck cl cm cn co
cp cq cr
❏❏ For details, see (
6
p7)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
1. INPUT SELECTOR dial: Switch the input to be played.
2. MCACC indicator: This lights when you have enabled the speaker calibration
made with MCACC. ( p139, 156)
3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to
turn the display off.
4. INFO button: Switches the information on the display. ( p105)
5. ZONE 2 ON/OFF button: Turns ZONE 2 ON/OFF. ( p101)
6. ZONE 3 ON/OFF button: Turns ZONE 3 ON/OFF.( p101)
7. ZONE CONTROL button: Controls the multi-zone function. ( p101)
8. MULTI-ZONE MUSIC button: Enables the MULTI-ZONE MUSIC function to
play the same source in all the multi-zone connected rooms. ( p102)
9. Display ( p8)
10.Listening mode button: Press "AUTO/DIRECT", "SURROUND" or "STEREO"
to switch the listening mode. ( p103)
11.NETWORK indicator: This lights when "NET" is selected with the input selector
and the unit is connected to the network. If the unit is in standby mode, this
lights when functions such as HDMI CEC and network standby are enabled. It
does not light when ZONE 2/ZONE 3 is on, however.
12.Remote control sensor: Receives signals from the remote controller.
• The signal range of the remote controller is within about 16´/5 m, at an
angle of 20° on the perpendicular axis and 30° to either side.
13.WIRELESS indicator: Lights when the unit is connected to the wireless
network and when connected to a BLUETOOTH enabled device.
14.MASTER VOLUME
15. STANDBY/ON button
16.ADJUST button: Settings such as "Tone" and "Level" can be made quickly
during play on the TV screen. ( p147)
17.HOME button: Displays the Home. ( p117, 138, 143)
18.Cursor buttons ( / / / ) and ENTER button: Select the item with the
cursors and press ENTER to confirm. Use them to tune to stations when using
TUNER. ( p93)
19.RETURN button: Returns the display to the previous state.
20.TUNING MODE button: Switches the tuning mode. ( p93)
21.PHONES jack: Headphones with a standard plug (ø1/4"/6.3 mm) are
connected.
22.MCACC SETUP MIC jack: The supplied speaker setup microphone is
connected.( p139, 156)
23.PHASE CONTROL button: This turns on or off the Phase Control that corrects
phase disturbance in the low range to enhance the bass. ( p148)
24.USB port: A USB storage device is connected so that music files stored in it
can be played. ( p83) You can also supply power (5 V/500 mA) to USB
devices with a USB cable.
25.AUX INPUT HDMI jack: Connect a video camera, etc. using an HDMI cable.
( p65)
26.DIMMER button: You can switch the display off or adjust the brightness of the
display in three steps.
27.Front flap
7
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Display
1
2
3
4
7
56
8 9
1. This may light when performing operations with the "NET", "USB" input
selector.
2. Lights in the following conditions.
Z2/Z3: ZONE 2/ZONE 3 is on.
: Connected by BLUETOOTH.
: Connected by Wi-Fi.
NET: Lights when connected to the network with the "NET" input selector. It
will blink if incorrectly connected to the network.
USB: Lights when the "USB" input selector is selected, a USB device is
connected and the USB input is selected. It will blink if the USB device is not
properly connected.
HDMI: HDMI signals are input and the HDMI input is selected.
DIGITAL: Digital signals are input and the digital input is selected.
3. Lights according to the type of input digital audio signal and the listening
mode.
4. Lights in the following conditions.
RDS (European, Australian and Asian models): Receiving RDS broadcasting.
TUNED: Receiving AM/FM radio.
STEREO: Receiving FM stereo.
SLEEP: Sleep timer is set. ( p131)
AUTO STBY: Auto Standby is set. ( p131)
5. Lights when headphones are connected.
6. Blinks when muting is on.
7. Displays various information of the input signals.
8. Lights when adjusting the volume.
9. Speaker/Channel display: Displays the output channel that corresponds to the
selected listening mode.
8
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Rear Panel
90°
180°
❏❏ For details, see (
9
p10)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
1. DIGITAL AUDIO IN OPTICAL/COAXIAL jacks: Input TV or AV component
digital audio signals with a digital optical cable or digital coaxial cable.
2. ANTENNA AM LOOP/FM UNBAL 75Ω terminal: The supplied antennas are
connected.
3. COMPONENT VIDEO IN jacks: Input the AV component video signals with a
component video cable. (Compatible only with 480i or 576i resolution.)
4. USB port: A USB storage device is connected so that music files stored in it
can be played. ( p83) You can also supply power (5 V/500 mA) to USB
devices with a USB cable.
5. VIDEO IN jacks: Input the AV component video signals with an analog video
cable.
6. NETWORK port: Connect to the network with a LAN cable.
7. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH
enabled device. Adjust their angles according to the connection status.
8. RS-232C port: Connect a home control system equipped with an RS-232C
port. For adopting a home control system, contact the specialized stores.
9. HDMI OUT jacks: Transmit video signals and audio signals with an HDMI
cable connected to a monitor such as a TV or projector.
10.HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable
connected to an AV component.
11.AC IN: The supplied power cord is connected.
12.SIGNAL GND terminal: The ground wire of the turntable is connected.
13.AUDIO IN jacks: Input AV component audio signal with an analog audio cable.
14.IR IN/OUT port: Connect a remote control receiver unit.( p71)
15.12V TRIGGER OUT A/B jack: Connect a device equipped with a 12V trigger
input jack to enable power link operation between the device and this unit.
( p72)
16.SPEAKERS terminals: Connect speakers with speaker cables. (North
American models support banana plugs.)
17.PRE OUT jacks: Connect a power amplifier. ( p57)
18.SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a
subwoofer cable. Up to two powered subwoofers can be connected. The same
signal is output from each of the SUBWOOFER PRE OUT jacks.
19.ZONE 3 PRE/LINE OUT jacks: Output audio signals with an analog audio
cable connected to a pre-main amplifier or a power amplifier in a separate
room (ZONE 3).
HEIGHT 2 PRE OUT jacks: Connect a power amplifier. ( p57)
20.ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio
cable to a premain amplifier or a power amplifier in a separate room (ZONE 2).
10
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Remote Controller
1. STANDBY/ON button
2. Input selector buttons: Switches the input to be played.
3. / buttons: Select the input to be played.
4.
(AV ADJUST) button: Settings such as "Tone" and "Level" can be made
quickly during play on the TV screen. ( p147)
5. Cursor buttons and ENTER button: Select the item with the cursors and press
ENTER to confirm your selection. When the folder or file lists are not shown on
one screen on the TV, press / to change the screen.
6. button: Displays the Home. ( p117, 138, 143)
7. Volume buttons
8. button: Temporarily mutes audio. Press again to cancel muting.
9. LISTENING MODE buttons: Allows you to select the listening mode.
( p103)
MAIN/ZONE 2/ZONE 3 buttons: Controls the multi-zone function. ( p98)
10.Play buttons: Used for play operations when playing Music Server ( p86)
or USB ( p83).
11.
button: Used for repeat or random play operations when playing Music
Server ( p86) or USB ( p83). Each time you press the button, the
mode switches from
(1-track repeat), to
(folder repeat), to (random).
CLEAR button: Deletes all characters you have entered when entering text on
the TV screen.
12. button: Switches the information on the display and is used to operate RDS
( p97).
13. button: Returns the display to the previous state.
14.MODE button: Used to switch between automatic tuning and manual tuning for
AM/FM stations ( p93), or operate the multi-zone function ( p98).
15.+Fav button: Used to register AM/FM radio stations. ( p95)
When the remote controller isn't working: The
Tips
remote controller may have switched to the ZONE
control mode. While pressing and holding MODE,
press the MAIN button for 3 seconds or more until
the remote indicator blinks once, and then switch it
to the main room control mode.
1
2
3
4
bm
5
6
bn
7
8
9
bk
bl
bo
bp
11
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connections
Connecting speakers
Connecting the TV
Connecting Playback Devices
Connecting an AV Component in a Separate Room
(Multi-zone Connection)
Connecting Antennas
Network Connection
Connecting External Control Devices
Connecting the Power Cord
13
59
62
66
69
70
71
73
12
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting speakers
You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your
speakers and usage environment. You can check the connection method and default settings. Dolby Atmos ( p106) listening mode faithfully reproduces the sound
design recorded in the Dolby Atmos audio format by installing Surround Back Speakers or Height Speakers. Dolby Atmos enables the accurate placement of sound
objects that have independent motion in a three-dimensional space with even greater clarity.
Do you enjoy sound with Dolby Atmos?
Yes
„„When using Surround Back
Speakers
•7.1 Channel System ( p45)
•7.1 Channel System + ZONE
SPEAKER ( p46)
•7.1 Channel System (Bi-Amping
the Speakers) ( p47)
No
„„When using 1 set of Height Speakers
•5.1.2 Channel System ( p48)
•5.1.2 Channel System + ZONE
SPEAKER ( p49)
•5.1.2 Channel System (Bi-Amping
the Speakers) ( p50)
•7.1.2 Channel System ( p51)
•7.1.2 Channel System + ZONE
SPEAKER ( p52)
•5.1 Channel System ( p42)
•5.1 Channel System + ZONE
SPEAKER ( p43)
•5.1 Channel System (Bi-Amping
the Speakers) ( p44)
„„When using 2 sets of Height Speakers
•5.1.4 Channel System ( p53)
•5.1.4 Channel System + ZONE
SPEAKER ( p54)
•7.1.4 Channel System ( p55)
•7.1.4 Channel System + ZONE
SPEAKER ( p56)
13
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Speaker Installation
„„ 5.1 Channel System
2
3
6
This is a basic 5.1 Channel System. Front speakers output the front stereo
sound, and a center speaker outputs the sound of the center of the screen, such
as dialogs and vocals. Surround speakers create the back sound field. Powered
subwoofer reproduces the bass sound, and creates the rich sound field.
The front speakers should be positioned at ear height while the surround
speakers should be positioned just above ear height. The center speaker
should be set up facing the listening position at an angle. Placing the powered
subwoofer between the center speaker and the front speaker gives you a natural
sound even when playing music sources.
1
1,2 Front Speakers
3 Center Speaker
4,5 Surround Speakers
6 Powered Subwoofer
*1
*2
5
4
*1: 22° to 30°, *2: 120°
14
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1 Channel System
3
2
6
This is a 7.1 Channel System that consists of the basic 5.1 Channel System
( p14) and added surround back speakers. Front speakers output the
front stereo sound, and a center speaker outputs the sound of the center of the
screen, such as dialogs and vocals. Surround speakers create the back sound
field. Powered subwoofer reproduces the bass sound, and creates the rich
sound field. Surround back speakers improves the sense of envelopment and
connectivity of sound in the back sound field, and provides a more real sound
field. Furthermore, by installing surround back speakers, when the input format is
Dolby Atmos, you can select the Dolby Atmos listening mode which realizes the
most up-to-date 3D sound,
The front speakers should be positioned at ear height while the surround
speakers should be positioned just above ear height. The center speaker
should be set up facing the listening position at an angle. Placing the powered
subwoofer between the center speaker and the front speaker gives you a natural
sound even when playing music sources. The surround back speakers should be
positioned at ear height.
• If surround back speakers are installed, be sure to install surround speakers
as well.
1
*1
*2
5
4
*3
8
1,2 Front Speakers
3 Center Speaker
4,5 Surround Speakers
6 Powered Subwoofer
7,8 Surround Back Speakers
7
*1: 22° to 30°, *2: 90° to 110°, *3: 135° to 150°
15
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1.2 Channel System
A 5.1.2 Channel System is a speaker layout consisting of the basic 5.1 Channel System (
your speakers and usage environment from the following three types.
p14) and added height speakers. Select the height speakers that suit
❏❏ Front High Speakers/Rear High Speakers
Installation Example ( p17)
❏❏ Ceiling Speakers Installation Example
( p18)
❏❏ Dolby Enabled Speakers (Dolby Speakers)
Installation Example ( p19)
16
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Front High Speakers/Rear High Speakers
Installation Example
8
This is a system with the basic 5.1 channel system ( p14) consisting of front
speakers, a center speaker, surround speakers and a powered subwoofer, and
added front high speakers or rear high speakers combined. By installing such
height speakers, when the input format is Dolby Atmos, you can select the Dolby
Atmos listening mode which realizes the most up-to-date 3D sound including
overhead sound. Front high speakers or rear high speakers should be installed at
least 3´/0.9 m higher than the front speakers.
Front high speakers should be installed directly above the front speakers, and the
distance between the rear high speakers should match the distance between the
front speakers. In both cases, the speakers should be set up facing the listening
position at an angle.
7
3´ (0.9 m)
or more
7,8 Height Speakers
Choose one of the following:
• Front High Speakers
• Rear High Speakers
*1
*2
8
*1: 22° to 30°, *2: 120°
7
3´ (0.9 m)
or more
17
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Ceiling Speakers Installation Example
8
7
8
7
This is a system with the basic 5.1 channel system ( p14) consisting of front
speakers, a center speaker, surround speakers and a powered subwoofer, and
added top front speakers or top middle speakers or top rear speakers combined.
By installing such height speakers, when the input format is Dolby Atmos, you
can select the Dolby Atmos listening mode which realizes the most up-to-date
3D sound including overhead sound. Install the top front speakers on the ceiling
anterior to the seating position, top middle speakers on the ceiling directly above
the seating position, and top rear speakers on the ceiling posterior to the seating
position. The distance between each pair should match the distance between the
front speakers.
• Dolby Laboratories recommends the setups of these types of height speakers
to obtain the best Dolby Atmos effect.
8
7
*3
*2
7,8 Height Speakers
Choose one of the following:
• Top Front Speakers
• Top Middle Speakers
• Top Rear Speakers
*1
*1: 30° to 55°, *2: 65° to 100°, *3: 125° to 150°
18
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Dolby Enabled Speakers (Dolby Speakers)
Installation Example
8
This is a system with the basic 5.1 channel system ( p14) consisting of front
speakers, a center speaker, surround speakers and a powered subwoofer, and
added Dolby enabled speakers (front) or Dolby enabled speakers (surround)
combined. Dolby enabled speakers are special speakers designed to face the
ceiling, so that the sound is heard from overhead by bouncing the sound off the
ceiling. By installing such height speakers, when the input format is Dolby Atmos,
you can select the Dolby Atmos listening mode which realizes the most up-todate 3D sound including overhead sound.
Install them either on the front speakers or on the surround speakers.
7
7,8 Height Speakers
Choose one of the following:
• Dolby Enabled Speakers (Front)
• Dolby Enabled Speakers (Surround)
*1
*2
8
7
*1: 22° to 30°, *2: 120°
19
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1.2 Channel System
A 7.1.2 Channel System is a speaker layout consisting of the 7.1 Channel System (
speakers and usage environment from the following three types.
p15) and added height speakers. Select the height speakers that suit your
❏❏ Front High Speakers/Rear High Speakers
Installation Example ( p21)
❏❏ Ceiling Speakers Installation Example
( p22)
❏❏ Dolby Enabled Speakers (Dolby Speakers)
Installation Example ( p23)
20
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Front High Speakers/Rear High Speakers
Installation Example
bk
This is a system with the 7.1 channel system ( p15) consisting of front
speakers, a center speaker, surround speakers, surround back speakers and
a powered subwoofer, and added front high speakers or rear high speakers
combined. By installing such height speakers, when the input format is Dolby
Atmos, you can select the Dolby Atmos listening mode which realizes the most
up-to-date 3D sound including overhead sound. Front high speakers or rear high
speakers should be installed at least 3´/0.9 m higher than the front speakers.
Front high speakers should be installed directly above the front speakers, and the
distance between the rear high speakers should match the distance between the
front speakers. In both cases, the speakers should be set up facing the listening
position at an angle.
9
3´ (0.9 m)
or more
9,10 Height Speakers
Choose one of the following:
• Front High Speakers
• Rear High Speakers
*1
*2
bk
*3
*1: 22° to 30°, *2: 90° to 110°, *3: 135° to 150°
9
3´ (0.9 m)
or more
21
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Ceiling Speakers Installation Example
bk
9
bk
9
This is a system with the 7.1 channel system ( p15) consisting of front
speakers, a center speaker, surround speakers, surround back speakers and
a powered subwoofer, and added top front speakers or top middle speakers or
top rear speakers combined. By installing such height speakers, when the input
format is Dolby Atmos, you can select the Dolby Atmos listening mode which
realizes the most up-to-date 3D sound including overhead sound. Install the top
front speakers on the ceiling anterior to the seating position, top middle speakers
on the ceiling directly above the seating position, and top rear speakers on the
ceiling posterior to the seating position. The distance between each pair should
match the distance between the front speakers.
• Dolby Laboratories recommends the setups of these types of height speakers
to obtain the best Dolby Atmos effect.
bk
9
*3
*2
9,10 Height Speakers
Choose one of the following:
• Top Front Speakers
• Top Middle Speakers
• Top Rear Speakers
*1
*1: 30° to 55°, *2: 65° to 100°, *3: 125° to 150°
22
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Dolby Enabled Speakers (Dolby Speakers)
Installation Example
bk
This is a system with the 7.1 channel system ( p15) consisting of front
speakers, a center speaker, surround speakers, surround back speakers and a
powered subwoofer, and added Dolby enabled speakers (front), Dolby enabled
speakers (surround) or Dolby enabled speakers (surround back) combined.
Dolby enabled speakers are special speakers designed to face the ceiling, so
that the sound is heard from overhead by bouncing the sound off the ceiling. By
installing such height speakers, when the input format is Dolby Atmos, you can
select the Dolby Atmos listening mode which realizes the most up-todate 3D
sound including overhead sound.
Install them either on the front speakers, on the surround speakers or on the
surround back speakers.
9
9,10 Height Speakers
Choose one of the following:
• Dolby Enabled Speakers (Front)
• Dolby Enabled Speakers (Surround)
• Dolby Enabled Speakers (Surround Back)
*1
*2
bk
9
*3
bk
9
*1: 22° to 30°, *2: 90° to 110°, *3: 135° to 150°
23
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1.4 Channel System
A 5.1.4 Channel System is a speaker layout combining 2 sets of the height speakers, 1 set of left and right at the front and 1 set of left and right at the rear, to the basic
5.1 Channel System ( p14). By installing the height speakers, when the input format is Dolby Atmos, you can select the Dolby Atmos listening mode which realizes
the most up-to-date 3D sound including overhead sound. Combination of 2 height speakers can be selected from following.
❏❏ Combination example when Top Front
Speakers are used at the front ( p25)
❏❏ Combination example when Top Middle
Speakers are used at the front ( p27)
❏❏ Combination example when Front High
Speakers are used at the front ( p28)
❏❏ Combination example when Dolby Enabled
Speakers (Front) are used at the front
( p30)
24
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Combination example when Top Front
Speakers are used at the front
(Example 1) Use top rear speakers at the rear
8
7
About the top front speakers
8
bk
9
*2
7
*2: 125° to 150°
The top rear speakers are installed on the ceiling at rear of the listening position,
and the width between the left and right speakers is optimal to match the one for
the front speakers.
*1
9,10 Top Rear Speakers
(Example 2) Use rear high speakers at the rear
bk
87
9
3´ (0.9 m)
or more
*1: 30° to 55°
The top front speakers are installed on the ceiling at front of the listening
position, and the width between the left and right speakers is optimal to match
the one for the front speakers. When the top front speakers are used in front, the
combination of the height speakers at the rear can be selected from the following
3 examples shown at the right.
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3’/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
7,8 Top Front Speakers
9,10 Rear High Speakers
25
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
(Example 3) Use Dolby Enabled Speakers (Surround) at the rear
8
bk
7
9
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround) are installed on top of the surround
speakers.
9,10 Dolby Enabled Speakers (Surround)
26
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Combination example when Top Middle
Speakers are used at the front
Use rear high speakers at the rear
bk
About the top middle speakers
87
8
7
9
3´ (0.9 m)
or more
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3’/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
*1
9,10 Rear High Speakers
*1: 65° to 100°
The top middle speakers are installed on the ceiling immediately above the
listening position, and the width between the left and right speakers is optimal to
match the one for the front speakers. When the top middle speakers are used in
front, the rear high speakers in the figure at the right can be used at the rear.
7,8 Top Middle Speakers
27
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Combination example when Front High
Speakers are used at the front
(Example 1) Use rear high speakers at the rear


About the front high speakers
8


3´ (0.9 m)
or more
7
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3’/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
3´ (0.9 m)
or more
9,10 Rear High Speakers
*1
(Example 2) Use top middle speakers at the rear
*2



*3
*1: 22° to 30°, *2: 120°
Install the front high speakers immediately above the front speakers minimum of
3’/0.9 m higher, and tilted so they will point toward the listener. When the front
high speakers are used in front, the combination of the height speakers at the
rear can be selected from the following 4 examples shown at the right.
*3: 65° to 100°
The top middle speakers are installed on the ceiling immediately above the
listening position, and the width between the left and right speakers is optimal to
match the one for the front speakers.
7,8 Front High Speakers
9,10 Top Middle Speakers
28
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
(Example 3) Use top rear speakers at the rear



*4
*4: 125° to 150°
The top rear speakers are installed on the ceiling at rear of the listening position,
and the width between the left and right speakers is optimal to match the one for
the front speakers.
9,10 Top Rear Speakers
(Example 4) Use Dolby Enabled Speakers (Surround) at the rear




The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround) are installed on top of the surround
speakers.
9,10 Dolby Enabled Speakers (Surround)
29
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Combination example when Dolby Enabled
Speakers (Front) are used at the front
(Example 1) Use top rear speakers at the rear
bk
9
About the Dolby enabled speakers (front)
*3
78
8
7
*3: 125° to 150°
The top rear speakers are installed on the ceiling at rear of the listening position,
and the width between the left and right speakers is optimal to match the one for
the front speakers.
9,10 Top Rear Speakers
*1
(Example 2) Use rear high speakers at the rear
*2
bk
9
8
7
3´ (0.9 m)
or more
*1: 22° to 30°, *2: 120°
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (front) are installed on top of the front speakers.
When the Dolby enabled speakers (front) are used in front, the combination of
the height speakers at the rear can be selected from the following 3 examples
shown at the right.
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3’/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
9,10 Rear High Speakers
7,8 Dolby Enabled Speakers (Front)
30
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
(Example 3) Use Dolby Enabled Speakers (Surround) at the rear
8
bk
7
9
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround) are installed on top of the surround
speakers.
9,10 Dolby Enabled Speakers (Surround)
31
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1.4 Channel System
A 7.1.4 Channel System is a speaker layout combining 2 sets of the height speakers, 1 set of left and right at the front and 1 set of left and right at the rear, to the basic
7.1 Channel System ( p15). By installing the height speakers, when the input format is Dolby Atmos, you can select the Dolby Atmos listening mode which realizes
the most up-to-date 3D sound including overhead sound. Combination of 2 height speakers can be selected from following.
❏❏ Combination example when Top Front
Speakers are used at the front ( p33)
❏❏ Combination example when Top Middle
Speakers are used at the front ( p35)
❏❏ Combination example when Front High
Speakers are used at the front ( p36)
❏❏ Combination example when Dolby Enabled
Speakers (Front) are used at the front
( p38)
32
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Combination example when Top Front
Speakers are used at the front
(Example 1) Use top rear speakers at the rear
bk
9
About the top front speakers
bk
bm
bl
*2
9
*2: 125° to 150°
The top rear speakers are installed on the ceiling at rear of the listening position,
and the width between the left and right speakers is optimal to match the one for
the front speakers.
*1
11,12 Top Rear Speakers
(Example 2) Use rear high speakers at the rear
bm
bk 9
bl
3´ (0.9 m)
or more
*1: 30° to 55°
The top front speakers are installed on the ceiling at front of the listening
position, and the width between the left and right speakers is optimal to match
the one for the front speakers. When the top front speakers are used in front, the
combination of the height speakers at the rear can be selected from the following
4 examples shown at the right.
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3’/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
9,10 Top Front Speakers
11,12 Rear High Speakers
33
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
(Example 3) Use Dolby Enabled Speakers (Surround) at the rear
bk
9
bm
bl
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround) are installed on top of the surround speakers.
11,12 Dolby Enabled Speakers (Surround)
(Example 4) Use Dolby Enabled Speakers (Surround Back) at the rear
bk
bm
9
bl
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround back) are installed on top of the surround
back speakers.
11,12 Dolby Enabled Speakers (Surround Back)
34
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Combination example when Top Middle
Speakers are used at the front
Use rear high speakers at the rear
bm
About the top middle speakers
bk 9
bk
9
bl
3´ (0.9 m)
or more
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3’/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
*1
11,12 Rear High Speakers
*1: 65° to 100°
The top middle speakers are installed on the ceiling immediately above the
listening position, and the width between the left and right speakers is optimal to
match the one for the front speakers. When the top middle speakers are used in
front, the rear high speakers in the figure at the right can be used at the rear.
9,10 Top Middle Speakers
35
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Combination example when Front High
Speakers are used at the front
(Example 1) Use rear high speakers at the rear


About the front high speakers


3´ (0.9 m)
or more


3´ (0.9 m)
or more
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3’/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
*1
11,12 Rear High Speakers
*2
(Example 2) Use top middle speakers at the rear
*3



*4
*1: 22° to 30°, *2: 90° to 110°, *3: 135° to 150°
Install the front high speakers immediately above the front speakers minimum of
3’/0.9 m higher, and tilted so they will point toward the listener. When the front
high speakers are used in front, the combination of the height speakers at the
rear can be selected from the following 5 examples shown at the right.
*4: 65° to 100°
The top middle speakers are installed on the ceiling immediately above the
listening position, and the width between the left and right speakers is optimal to
match the one for the front speakers.
9,10 Front High Speakers
11,12 Top Middle Speakers
36
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
(Example 3) Use top rear speakers at the rear
(Example 5) Use Dolby Enabled Speakers (Surround Back) at the rear




*5

*5: 125° to 150°

The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround back) are installed on top of the surround
back speakers.
The top rear speakers are installed on the ceiling at rear of the listening position,
and the width between the left and right speakers is optimal to match the one for
the front speakers.
11,12 Top Rear Speakers
11,12 Dolby Enabled Speakers (Surround Back)
(Example 4) Use Dolby Enabled Speakers (Surround) at the rear





The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround) are installed on top of the surround
speakers.
11,12 Dolby Enabled Speakers (Surround)
37
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏ Combination example when Dolby Enabled
Speakers (Front) are used at the front
(Example 1) Use top rear speakers at the rear
bm
bl
About the Dolby enabled speakers (front)
*4
9bk
bk
9
*4: 125° to 150°
The top rear speakers are installed on the ceiling at rear of the listening position,
and the width between the left and right speakers is optimal to match the one for
the front speakers.
11,12 Top Rear Speakers
*1
(Example 2) Use rear high speakers at the rear
*2
bm
bl
*3
bk
9
3´ (0.9 m)
or more
*1: 22° to 30°, *2: 90° to 110°, *3: 135° to 150°
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (front) are installed on top of the front speakers.
When the Dolby enabled speakers (front) are used in front, the combination of
the height speakers at the rear can be selected from the following 4 examples
shown at the right.
The width between the rear high speakers should match the one for the front
speakers, and they should be installed minimum of 3’/0.9 m higher than the front
speakers, and tilted so they will point toward the listener.
11,12 Rear High Speakers
9,10 Dolby Enabled Speakers (Front)
38
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
(Example 3) Use Dolby Enabled Speakers (Surround) at the rear
bk
bm
9
bl
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround) are installed on top of the surround
speakers.
11,12 Dolby Enabled Speakers (Surround)
(Example 4) Use Dolby Enabled Speakers (Surround Back) at the rear
bk
9
bm
bl
The Dolby enabled speakers are the special speaker that the sound is emitted
toward the ceiling, and have the effect the sound to come from above by
reflecting the sound on the ceiling.
The Dolby enabled speakers (surround back) are installed on top of the surround
back speakers.
11,12 Dolby Enabled Speakers (Surround Back)
39
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Speaker Connections and "Speaker Setup" Settings
Connections
Make correct connection between the unit's jacks and speaker's jacks (+ side to
+ side, and - side to - side) for each channel. If the connection is wrong, a bass
sound will not be reproduced properly due to reverse phase. Twist the wires
exposed from the tip of the speaker cable so that the wires do not stick out of the
speaker terminal when connecting. If the exposed wires touch the rear panel,
or the + side and – side wires touch each other, the protection circuit will be
activated.
„„(Note) Speaker Impedance
Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers
to be connected has an impedance of 4 Ω or more and 6 Ω or less, the setting
is required in the System Setup menu after the Initial Setup ( p155) is
completed. Press
on the remote controller, and in the Home displayed set
"System Setup" - "Speaker" -"Configuration" - "Speaker Impedance" to "4ohms".
„„Connect the Speaker Cables
1/2˝
(12 mm)
40
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„Connect the Subwoofer
a
a Subwoofer cable
Connect a powered subwoofer with this unit using a subwoofer cable. Up to two
powered subwoofers can be connected. The same signal is output from each
SUBWOOFER PRE OUT jack.
41
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1 Channel System
2
6
5
3
 "Speaker Setup" settings during
Initial Setup ( p156)
1
4
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: No
This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation" (
42
p14).
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1 Channel System + ZONE SPEAKER
MAIN ROOM
2
6
 "Speaker Setup" settings during
Initial Setup ( p156)
3
1
5
4
ZONE 2
8
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: Zone 2 or Zone 2/
Zone 3
• Bi-Amp: No
ZONE 3
7
bk
9
MAIN ROOM: This is a basic 5.1 Channel System. For details of the speaker layout, refer to "Speaker Installation"
( p14).
ZONE 2/ZONE 3: You can enjoy 2-ch audio in the separate room (ZONE 2/ZONE 3) while performing 5.1-ch playback in
the main room (where this unit is located). The same source can be played back in the main room and ZONE 2/ZONE 3
simultaneously. Also, different sources can be played back in both rooms.
To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Note
that ZONE 3 output is not possible with the connection using a HDMI cable, digital coaxial cable, or digital optical cable.
43
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1 Channel System (Bi-Amping the Speakers)
2
6
5
3
 "Speaker Setup" settings during
Initial Setup ( p156)
1
4
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: Yes
For highfrequency
For lowfrequency
You can configure a 5.1 Channel System ( p14) by connecting front speakers that support Bi-Amping connection.
The Bi-Amping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar
connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction
manual of your speakers as well.
44
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1 Channel System
2
6
3
 "Speaker Setup" settings during
Initial Setup ( p156)
1
5
4
8
7
• Speaker Channels: 7.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: No
This is a 7.1 Channel System that consists of the basic 5.1 Channel System and added surround back speakers.
For details of the speaker layout, refer to "Speaker Installation" ( p15).
45
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1 Channel System + ZONE SPEAKER
MAIN ROOM
2
6
 "Speaker Setup" settings during
Initial Setup ( p156)
3
1
5
4
8
7
• Speaker Channels: 7.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: Zone 2
• Bi-Amp: No
ZONE 2
bk
9
MAIN ROOM: This is a 7.1 Channel System that consists of the basic 5.1 Channel System and added surround back
speakers. For details of the speaker layout, refer to "Speaker Installation" ( p15).
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
46
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1 Channel System(Bi-Amping the Speakers)
2
6
3
 "Speaker Setup" settings during
Initial Setup ( p156)
1
5
4
8
7
• Speaker Channels: 7.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: Yes
For highfrequency
For lowfrequency
You can configure a 7.1 Channel System ( p15) by connecting front speakers that support Bi-Amping connection.
The Bi-Amping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar
connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction
manual of your speakers as well.
47
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1.2 Channel System
8
2
6
5
7
3
 "Speaker Setup" settings during
Initial Setup ( p156)
1
4
• Speaker Channels: 5.1.2 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the type of
height speaker actually installed.
• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: No
This is a combination of the 5.1 Channel System and front high speakers. A front high speaker is a type of height speaker.
You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers/Rear High Speakers Installation Example ( p17)
❏ Ceiling Speakers Installation Example ( p18)
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example ( p19)
48
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1.2 Channel System + ZONE SPEAKER
MAIN ROOM
8
 "Speaker Setup" settings during
Initial Setup ( p156)
7
2
6
5
3
1
4
• Speaker Channels: 5.1.2 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: Select the type of
height speaker actually installed.
• Zone Speaker: Zone 2
• Bi-Amp: No
ZONE 2
bk
9
MAIN ROOM: This is a combination of the 5.1 Channel System and front high speakers. A front high speaker is a type of
height speaker. You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers/Rear High Speakers Installation Example ( p17)
❏ Ceiling Speakers Installation Example ( p18)
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example ( p19)
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
49
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1.2 Channel System(Bi-Amping the Speakers)
8
2
6
5
7
3
 "Speaker Setup" settings during
Initial Setup ( p156)
1
4
• Speaker Channels: 5.1.2 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: Select the type of
height speaker actually installed.
• Zone Speaker: No
• Bi-Amp: Yes
For highfrequency
For lowfrequency
This is a combination of the 5.1 Channel System and front high speakers. A front high speaker is a type of height speaker.
You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers/Rear High Speakers Installation Example ( p17)
❏ Ceiling Speakers Installation Example ( p18)
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example ( p19)
You can configure a 5.1.2 Channel System by connecting front speakers that support Bi-Amping connection. The BiAmping connection can improve the quality of the low and high pitched ranges. Be sure to remove the jumper bar
connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction
manual of your speakers as well.
50
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1.2 Channel System
bk
2
6
3
9
1
5
 "Speaker Setup" settings during
Initial Setup ( p156)
4
8
7
• Speaker Channels: 7.1.2 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the type of
height speaker actually installed.
• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: No
This is a combination of the 7.1 Channel System and front high speakers. A front high speaker is a type of height speaker.
You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers/Rear High Speakers Installation Example ( p21)
❏ Ceiling Speakers Installation Example ( p22)
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example ( p23)
51
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1.2 Channel System + ZONE SPEAKER
MAIN ROOM
bk
2
6
3
 "Speaker Setup" settings during
Initial Setup ( p156)
9
1
5
4
8
7
• Speaker Channels: 7.1.2 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the type of
height speaker actually installed.
• Height 2 Speaker: --• Zone Speaker: Zone 2
• Bi-Amp: No
ZONE 2
bm
bl
MAIN ROOM: This is a combination of the 7.1 Channel System and front high speakers. A front high speaker is a type of
height speaker. You can select only one set of height speakers from the following three types for connection.
❏ Front High Speakers/Rear High Speakers Installation Example ( p21)
❏ Ceiling Speakers Installation Example ( p22)
❏ Dolby Enabled Speakers (Dolby Speakers) Installation Example ( p23)
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
• While ZONE 2 playback is being performed, Height 1 speakers installed in the main room cannot play audio.
52
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1.4 Channel System
bk
8
7
2
6
5
9
 "Speaker Setup" settings during
Initial Setup ( p156)
1
3
4
• Speaker Channels: 5.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the type of
height speaker actually installed.
• Height 2 Speaker: Select the type of
height speaker actually installed.
• Zone Speaker: No
• Bi-Amp: No
This is an example of combining the top middle speakers at the front and the rear high speakers at the rear to the 5.1
Channel System. The height speakers in front can be selected from following 4 types. The height speakers that can be
combined at the rear differ depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front ( p25)
❏ Combination example when Top Middle Speakers are used at the front ( p27)
❏ Combination example when Front High Speakers are used at the front ( p28)
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front ( p30)
53
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 5.1.4 Channel System + ZONE SPEAKER
MAIN ROOM
bk
8
7
2
 "Speaker Setup" settings during
Initial Setup ( p156)
9
1
6
5
3
4
• Speaker Channels: 5.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select the type of
height speaker actually installed.
• Height 2 Speaker: Select the type of
height speaker actually installed.
• Zone Speaker: Zone 2
• Bi-Amp: No
ZONE 2
bm
bl
MAIN ROOM: This is an example of combining the top middle speakers at the front and the rear high speakers at the rear
to the 5.1 Channel System. The height speakers in front can be selected from following 4 types. The height speakers that
can be combined at the rear differ depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front ( p25)
❏ Combination example when Top Middle Speakers are used at the front ( p27)
❏ Combination example when Front High Speakers are used at the front ( p28)
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front ( p30)
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback in the main room (where
this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
• While ZONE 2 playback is being performed, Height 1 speakers installed in the main room cannot play audio.
54
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1.4 Channel System
bm
bk 9
2
6
5
8
bl
1
3
4
Power amplifier
7
This is an example of combining the top middle speakers at the front and the rear high
speakers at the rear to the 7.1 Channel System. The height speakers in front can be selected
from following 4 types. The height speakers that can be combined at the rear differ depending
on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front ( p33)
❏ Combination example when Top Middle Speakers are used at the front ( p35)
❏ Combination example when Front High Speakers are used at the front ( p36)
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front ( p38)
55
 "Speaker Setup" settings during Initial Setup (
p156)
• Speaker Channels: 7.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select
the type of height speaker
actually installed.
• Height 2 Speaker: Select
the type of height speaker
actually installed.
• Zone Speaker: No
• Bi-Amp: No
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 7.1.4 Channel System + ZONE SPEAKER
MAIN ROOM
bm
bk
9
2
bl
1
6
5
8
3
Power amplifier
4
7
ZONE 2
bo
bn
MAIN ROOM: This is an example of combining the top middle speakers at the front and the
rear high speakers at the rear to the 7.1 Channel System. The height speakers in front can be
selected from following 4 types. The height speakers that can be combined at the rear differ
depending on the height speakers used at the front.
❏ Combination example when Top Front Speakers are used at the front ( p33)
❏ Combination example when Top Middle Speakers are used at the front ( p35)
❏ Combination example when Front High Speakers are used at the front ( p36)
❏ Combination example when Dolby Enabled Speakers (Front) are used at the front ( p38)
ZONE 2: You can enjoy 2-ch audio in the separate room (ZONE 2) while performing playback
in the main room (where this unit is located). The same source can be played back in the main
room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms.
• While ZONE 2 playback is being performed, Height 1 speakers installed in the main room
cannot play audio.
56
 "Speaker Setup" settings during Initial Setup (
p156)
• Speaker Channels: 7.1.4 ch
• Subwoofer: Yes
• Height 1 Speaker: Select
the type of height speaker
actually installed.
• Height 2 Speaker: Select
the type of height speaker
actually installed.
• Zone Speaker: Zone 2
• Bi-Amp: No
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting a Power Amplifier
Power amplifier
You can connect a power amplifier to the unit and use the unit as a pre-amplifier
in order to produce a large volume that cannot be output with the unit only.
Connect the speakers to the power amplifier. For details, refer to the power
amplifier's instruction manual.
• Connect as shown on the left using the PRE OUT jacks.
a
Setup
• Set "System Setup" - "Speaker" - "Configuration" - "Speaker Channels" in
accordance to the number of channels for the connected speakers.
a Analog audio cable
57
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Speaker combinations
• Up to two powered subwoofers can be connected in either combination.
Speaker
Channels
2.1 ch
3.1 ch
4.1 ch
5.1 ch
6.1 ch
7.1 ch
2.1.2 ch
3.1.2 ch
4.1.2 ch
5.1.2 ch
6.1.2 ch
7.1.2 ch
4.1.4 ch
5.1.4 ch
6.1.4 ch
7.1.4 ch
FRONT
CENTER
SURROUND
SURROUND
BACK
HEIGHT 1
(*2) (*3)
(*2) (*3)
(*2) (*3)
(*2) (*3)
(*4)
(*4)
(*4)
(*4)
(*4)
(*4)
(*5)
(*5)
HEIGHT 2
Bi-AMP (*1)
(*3)
(*3)
(*3)
(*3)
ZONE 2 (*1)
ZONE 3 (*1)
(ZONE SPEAKER) (ZONE SPEAKER)
(*2)
(*2)
(*2)
(*2)
(*4)
(*4)
(*4)
(*4)
(*4)
(*4)
(*2)
(*2)
(*2)
(*2)
(*1) The Bi-AMP and ZONE speakers cannot be used simultaneously.
(*2) When using the ZONE 2 speakers (except when the ZONE 3 is used), it is necessary to connect the height speakers to the SURROUND BACK terminal. When
using both the ZONE 2 speakers and the ZONE 3 speakers, the Height 1 speakers cannot be used simultaneously with the ZONE speakers.
(*3) When using the Bi-AMP speakers, it is necessary to connect the Bi-AMP speakers to the HEIGHT 1 terminals, and the height speaker to the SURROUND BACK
terminals.
(*4) Height 1 speakers cannot be used simultaneously with the ZONE speakers.
(*5) Use an analog audio cable to connect the power amplifier to the PRE OUT SURROUND BACK jacks, then connect the surround back speakers to the power amplifier.
About the HEIGHT 1/HEIGHT 2
When connecting 2 sets of the height speakers, the combination of the height speakers that can be selected is as follows.
–– Height 1 Speaker: Top Middle, Height 2 Speaker: Rear High
–– Height 1 Speaker: Front High; Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back)
–– Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/Top Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled
Speaker (Surround Back)
When only 1 set of the height speakers is connected, 1 from the height speakers types can be selected.
58
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting the TV
Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the
audio of the TV on this unit. Connection with the TV differs depending on whether the TV supports the ARC (Audio Return Channel) function or not. The ARC function
transmits the audio signals of the TV via an HDMI cable, and plays the audio of the TV on this unit. To check if the TV supports the ARC function, refer to the instruction
manual of the TV, etc.
Does your TV support the ARC function?
Yes
•To ARC TV (
No
p60)
•To Non-ARC TV (
59
p61)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
To ARC TV
If the TV supports the ARC (Audio Return Channel) function (*), use only the
HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the
TV for connection.
• Another TV or projector can be connected to the HDMI OUT SUB jack. To
switch between MAIN and SUB, press the
button ( p147) on the remote
controller, and select "Other" - "HDMI Out". Note that this jack is not ARCcompatible.
Setup
• Settings are required to use the ARC function. Select "Yes" for "5. ARC Setup"
in Initial Setup ( p155).
• For detailed settings for TV connection, CEC function and audio output, refer
to the instruction manual of the TV.
(*) ARC function: This function transmits the audio signals of the TV via an
HDMI cable, and plays the audio of the TV on this unit. Connection to an ARCcompatible TV is complete with one HDMI cable. To check if the TV supports the
ARC function, refer to the instruction manual of the TV, etc.
a
TV
a HDMI cable
60
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
To Non-ARC TV
If the TV does not support the ARC (Audio Return Channel) function (*), connect
an HDMI cable and digital optical cable.
• If you use a cable set-top box, etc. connected to the input jack of this unit to
watch TV (without using a TV’s built-in tuner), connection with a digital optical
cable or analog audio cable is not required.
• Another TV or projector can be connected to the HDMI OUT SUB jack. To
switch between MAIN and SUB, press the
button ( p147) on the remote
controller, and select "Other" - "HDMI Out". Note that this jack is not ARCcompatible.
(*) ARC function: This function transmits the audio signals of the TV via an
HDMI cable, and plays the audio of the TV on this unit. Connection to an ARCcompatible TV is complete with one HDMI cable. To check if the TV supports the
ARC function, refer to the instruction manual of the TV, etc.
b
a
TV
a HDMI cable, b Digital optical cable
61
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting Playback Devices
Connecting an AV Component with HDMI Jack Mounted
This is a connection example of an AV component equipped with an HDMI jack.
When connecting with an AV component that conforms to the CEC (Consumer
Electronics Control) standard, you can use the HDMI CEC function (*) that
enables linking with input selectors, etc. and the HDMI Standby Through function
that can transmit video and audio signals of the AV component to the TV even if
this unit is in standby mode.
• To play 4K or 1080p video, use a high speed HDMI cable.
Setup
• The HDMI CEC function and HDMI Standby Through function are
automatically enabled if you select "Yes" for "5. ARC Setup" in Initial Setup
( p155). If "No, Skip" is selected, settings are required in the System
Setup menu after Initial Setup is completed. Settings are made in "System
Setup" - "Hardware" - "HDMI" in Home displayed by pressing
on the remote
controller. ( p129)
• To enjoy digital surround sound including Dolby Digital, set the audio output of
the connected Blu-ray Disc player etc. to the Bitstream output.
a
Streaming media
player
(*)The HDMI CEC function: This function enables various linking operations
with CEC-compliant devices, such as switching input selectors interlocking with
a CEC-compliant player, switching audio output between TV and this unit or
adjusting the volume using the remote controller of a CEC-compliant TV, and
automatically switching this unit to standby when the TV is turned off.
BD/DVD
Cable/Satellite
set-top box
GAME
a HDMI cable
62
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting an AV Component without HDMI Jack Mounted
This is a connection example of an AV component unequipped with an HDMI
jack. Select cables that match the jacks of the AV component for connection. For
example, when video input is connected to the BD/DVD jack, connect the audio
input to BD/DVD jack, too. Thus, video input jacks and audio input jacks should
have the same name for connection. Note that video signals input to the VIDEO
IN jack or the COMPONENT VIDEO IN jack are converted to HDMI video signals,
and then output from the HDMI OUT jack.
• To enjoy digital surround playback in formats such as Dolby Digital, you need
to make a connection for audio signals with a digital coaxial cable or a digital
optical cable.
• According to the illustration, changing the input assignment ( p119)
enables connection to jacks other than the BD/DVD jack.
a
b
Setup
• The COMPONENT VIDEO IN jacks are compatible only with 480i or 576i
resolution. When connecting to the COMPONENT VIDEO IN jacks, set the
output resolution of the player to 480i or 576i. If there is no option such as
480i, select interlace. If your player does not support 480i or 576i output, use
the VIDEO IN jack.
• To enjoy digital surround sound including Dolby Digital, set the audio output of
the connected Blu-ray Disc player etc. to the Bitstream output.
c
OR
BD/DVD
a Digital optical cable, b Analog audio cable, c Component video cable
63
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting an Audio Component
This is a connection example of an audio component. Connect a CD player using
a digital coaxial cable or analog audio cable. You can also connect a turntable
that has an MM-type cartridge to the PHONO jack.
• If the turntable has a built-in phono equalizer, connect it to any of the AUDIO
IN jacks other than the PHONO jack. Further, if the turntable uses an MC type
cartridge, install a phono equalizer compatible with the MC type cartridge
between the unit and the turntable, and then connect it to any of the AUDIO IN
jacks other than the PHONO jack.
If the turntable has a ground wire, connect it to the
GND terminal of this unit.
a
b
OR
a
CD
Turntable
a Analog audio cable , b Digital coaxial cable
64
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting a Video Camera, etc.
Connect a video camera, etc. to the AUX INPUT HDMI jack on the front panel
using an HDMI cable.
a
Video camera
a HDMI cable
65
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting an AV Component in a Separate Room (Multi-zone Connection)
Connecting a TV (ZONE 2)
While a disc is played on a Blu-ray Disc player in the main room (where this unit
is located), you can play the video and audio of the same Blu-ray Disc player or
another AV component on the TV equipped with an HDMI IN jack in a separate
room (ZONE 2). The TV in the separate room can play only the video of devices
connected to the HDMI IN1 to IN3 jacks of this unit.
• The audio from externally connected AV components can be output only when
the signal is 2ch PCM audio. It may also be necessary to convert the audio
output of the AV component to PCM output.
• When video and audio via HDMI input are output to ZONE 2, set "Input/Output
Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( p118) to "Use" on the System
Setup menu.
a
TV
a HDMI cable
66
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting a Pre-main Amplifier (ZONE 2)
You can enjoy 2-ch audio in the separate room (ZONE 2) while performing
playback in the main room (where this unit is located). Connect the ZONE 2 PRE/
LINE OUT jacks of the unit and the LINE IN jacks of the pre-main amplifier or
power amplifier in a separate room with an analog audio cable. The same source
can be played back in the main room and ZONE 2 simultaneously. Also, different
sources can be played back in both rooms.
• To output audio from an externally connected AV component to ZONE 2,
connect it to any of HDMI IN1 to IN3 jacks. If the AV component is not
equipped with an HDMI jack, use a digital coaxial cable, digital optical cable or
analog audio cable. Also, the audio from externally connected AV components
can be output to ZONE 2 only when the audio is analog or 2ch PCM signal.
When the AV component is connected to this unit with an HDMI cable, digital
coaxial cable or digital optical cable, change the audio output of the AV
component to the PCM output.
LINE
IN
Premain Amp.
a Analog audio cable
67
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting a Pre-main Amplifier (ZONE 3)
a
You can enjoy 2-ch audio in the separate room (ZONE 3) while performing
playback in the main room (where this unit is located). Use an analog cable to
connect the ZONE 3 PRE/LINE OUT jack of this unit and the LINE IN jack of the
pre-main amplifier or power amplifier in the separate room. The same source
can be played back in the main room and ZONE 3 simultaneously. Also, different
sources can be played back in both rooms.
• The ZONE 3 PRE/LINE OUT terminal can output only when "Speaker" "Configuration" in the System Setup menu ( p122) is set to one of the
following.
–– When "Speaker Channels" is set to "2.1 ch", "3.1 ch", "4.1 ch", or "5.1 ch"
–– When "Speaker Channels" is set to "5.1 ch" or "5.1.2 ch", and "Zone
Speaker" is set to "Zone 2/Zone 3"
–– When "Speaker Channels" is set to "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or
"5.1.2 ch", and "Bi-Amp" and "Zone Speaker" is set to "No"
• To output audio from an externally connected AV component to ZONE 3, use
an analog audio cable for connection. Note that ZONE 3 output is not possible
with the connection using a HDMI cable, digital coaxial cable, or digital optical
cable.
a
LINE
IN
BD/DVD
Premain Amp.
a Analog audio cable
68
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting Antennas
Connect the antenna to this unit, and set up the antenna at the best position for
listening while receiving radio signals. Attach the indoor FM antenna to the wall
using push pins or adhesive tape.
b
(European,
Australian and
Asian models)
(North American
models)
a
b
a
a Indoor FM antenna, b AM loop antenna
69
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Network Connection
This unit can be connected to the network using a wired LAN or Wi-Fi (wireless
LAN). You can enjoy network functions such as Internet radio by network
connection. If connection is made by the wired LAN, connect the router and the
NETWORK jack with the LAN cable as shown in the illustration. To connect by
Wi-Fi, select "Wireless" for "4. Network Connection" in Initial Setup ( p157),
select your desired setting method, and then follow the on-screen instructions.
For the Wi-Fi connection, stand the wireless antenna for use.
a
a LAN cable
70
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting External Control Devices
IR IN/OUT port
When connecting a remote control receiver unit consisting of an IR Receiver, etc.
to this unit, operation using the remote controller is possible even if the remote
control signal is difficult to reach (due to installation in the cabinet, etc.). It is also
possible to operate this unit from other room such as ZONE 2 with a remote
controller, or operate other devices with the remote controller by connecting
other devices to this unit. For adopting a remote control receiver unit, contact the
specialized stores.
• For the type of cable required for connection, refer to the operation manual,
etc. of the remote control receiver unit.
IR Receiver
71
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
12V TRIGGER OUT jack
When connecting a device equipped with a TRIGGER IN jack such as a BD/DVD
player to this unit, the device can be turned on or set to standby by interlocking
the operation on this unit. When the desired input is selected on the unit, power
link operation will be activated with a control signal of maximum 12 V/100 mA
from the 12V TRIGGER OUT A jack or maximum 12 V/25 mA when using the
12V TRIGGER OUT B jack. You can select the zone to output the control signal
by setting each of the inputs.
• For connection, use a monaural mini plug cable (ø1/8″/3.5 mm) without
resistance. Do not use a stereo mini plug cable.
a
BD/DVD
a Monaural mini plug cable (ø1/8″/3.5 mm)
72
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Connecting the Power Cord
Connect the power cord after all the connections are completed.
• Be sure to connect the power cord to the AC IN of the unit first, and
then connect it to the outlet. Always disconnect the outlet side first
whendisconnecting the power cord.
a
a Power cord
73
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Playback
AV Component Playback
75
®
BLUETOOTH Playback
76
Internet Radio
77
Spotify79
AirPlay®80
DTS Play-Fi®81
FlareConnectTM82
USB Storage Device
83
Playing back files on a PC and NAS (Music Server)
86
Play Queue
91
Listening To the AM/FM Radio
93
Multi-zone98
Listening Mode
103
74
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
AV Component Playback
You can play the audio from AV components, such as Blu-ray disc players through this unit.
• When a TV is connected to the HDMI OUT SUB jack, press , and select "Other" - "HDMI Out" to switch between MAIN and SUB.
Basic Operations
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. Press the input selector whose name is the same as that of the jack to which
the player is connected.
For example, press BD/DVD to play the player connected to the BD/DVD
jack. Press TV to listen the sound of the TV. To play a device connected to the
STRM BOX, PHONO, HDMI5, HDMI6 jack or the AUX INPUT HDMI jack on
the front panel, press
repeatedly to select the input.
• When the CEC link function works, the input switches automatically
when a CEC compliant TV or player is connected to this unit using HDMI
connection.
3. Start play on the AV component.
TV’s REMOTE
INPUT
Inputs
TV
HDMI 1
HDMI 2
HDMI 3
TV
Input selector
/
75
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
BLUETOOTH® Playback
You can wirelessly play the audio on a BLUETOOTH-enabled device, such as a smartphone.
Basic Operations
Perform the following procedure when this unit is on.
Pairing
1. When you press the
button, "Now Pairing..." is displayed on this unit's
display, and the pairing mode is enabled.
2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled
device, and then select this unit from among the devices displayed. If a
password is requested, enter "0000".
• This unit is displayed as "Pioneer VSX-LX503 XXXXXX". This display can
be changed with the Friendly Name function ( p144) or the Pioneer
Remote App (can be used with the iOS or Android™).
• To connect another BLUETOOTH-enabled device, press and hold the
button until "Now Pairing..." is displayed, and then perform step 2. This unit
can store the pairing information of up to 8 paired devices.
• The coverage area is approx. 48´/15 m. Note that connection is not always
guaranteed with all BLUETOOTH-enabled devices.
Playing Back
Pioneer VSX-LX503 XXX
1. Perform the connection procedure on the BLUETOOTH-enabled device.
The input on this unit automatically switches to "BLUETOOTH".
2. Playing the music file.
Turn up the volume of the BLUETOOTH-enabled device to an appropriate
level.
• Due to the characteristics of BLUETOOTH wireless technology, the sound
produced on this unit may slightly be behind the sound played on the
BLUETOOTH-enabled device.
76
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Internet Radio
By connecting this unit to an Internet-connected network, you can enjoy Internet radio services, such as TuneIn Radio, etc.
• To play Internet radio services, the network needs to be connected to the Internet.
• Depending on the Internet radio service, a user registration may be required on your PC beforehand. For details of each service, visit the website of each service.
Playing Back
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. Pressing NET will display the Network Functions list screen on the TV.
3. Select your preferred Internet radio service using cursor, and press ENTER to
confirm the selection.
4. Following the on-screen instructions, select a radio station and program using
cursor, and then press ENTER to play.
• To return to the previous screen, press .
TV’s REMOTE
INPUT
Inputs
TV
HDMI 1
HDMI 2
HDMI 3
TV
NET
Network
/ / /
ENTER
The illustration shows an image.
77
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Internet Radio Service Menu
You can bookmark specific stations, or delete stations that have been
bookmarked. The displayed menu varies according to the service being selected.
The menu icon
is displayed while a station is being played. When only this
icon is displayed, pressing ENTER will display the menu on the screen. When
multiple icons are displayed, select the
icon with the cursor, and press
ENTER.
Regarding the TuneIn Radio Account
If you create an account on the TuneIn Radio website (tunein.com), and log in it
from this unit, your favorite radio stations or programs you have followed on the
website are automatically added to your "My Presets" on this unit. "My Presets"
is displayed on the next level in the hierarchical structure of TuneIn Radio. To
display a radio station added to "My Presets", you need log into TuneIn Radio
from the unit. To log in, select "Login" - "I have a TuneIn account" in the "TuneIn
Radio" top list on the unit, and then enter your user name and password.
• If you select "Login" on this unit, a registration code is displayed. By using
this code, you can associate the device on the My Page section of the TuneIn
Radio website so that you can log in from "Login" - "Login with a registration
code" without entering the user name and password.
78
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Spotify
By connecting this unit to the same network as mobile devices, such as a smartphone and tablet, you can enjoy music played with Spotify Connect wirelessly.
• To play Spotify Connect, install a Spotify application on your smartphone or tablet. Also, you need to obtain a Spotify premium account.
–– For details of Spotify settings, go to:
www.spotify.com/connect/
Playing Back
1. Connect the mobile device to the access point where this unit is connected via
network.
2. Start up the Spotify application.
3. Play a track on the Spotify application, switch the screen to the playback
operation screen, and then tap "Devices Available" on the bottom of the
screen.
4. Select this unit.
5. This unit is automatically turned on, the input is switched to NET, and Spotify
will start the streaming playback.
• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is
set to "Off" in the Home, manually turn the unit on and then press NET on the
remote controller. In the factory default setting, the Network Standby function
( p131) is set to On.
Wi-Fi
Devices Available
Notes when using the multi-zone function
• To enjoy Spotify music in a separate room, select NET manually as the input
of the separate room. Then, select this unit on the Spotify application.
• Volume adjustment with the Spotify application is possible for speakers
connected to the ZONE speaker terminals or when the volume of the audio
device in a separate room is configured so that its volume can be adjusted on
this unit. In any other cases, adjust the volume on the audio device placed in a
separate room.
• To enjoy Spotify music in the main room after playing it in a separate room,
switch the input of the main room to NET.
Pioneer VSX-LX503 XXX
Devices Available
79
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
AirPlay®
By connecting this unit to the same network as iOS devices, such as iPhone®, iPod touch® and iPad®, you can enjoy music files on iOS devices wirelessly.
• Update the OS version on your iOS device to the latest version.
• Depending on the iOS version, operation screens or operation procedures on the iOS device may be different. For details, refer to the operating instructions for the iOS device.
Basic Operations
1. Connect the iOS device to the access point where this unit is connected via
network.
2. Tap the AirPlay icon
on the play screen of the music play application on the
iOS device, and select this unit from the displayed devices.
3. Play the music file on the iOS device.
• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is
set to "Off " in the Home, manually turn the unit on and then press NET on the
remote controller. In the factory default setting, the Network Standby function
( p131) is set to On.
• Due to the characteristics of AirPlay wireless technology, the sound produced
on this unit may slightly be behind the sound played on the AirPlay-enabled
device.
Wi-Fi
You can also play the music files on a PC with iTunes (Ver. 10.2 or later)
equipped. Confirm that this unit and the PC are connected to the same network
beforehand. Then, press NET on this unit. Next, click the AirPlay icon
in
iTunes, select this unit from the displayed devices, and start play of a music file.
iPhone
Pioneer VSX-LX503 XXXXXX
e.g., iOS 10
80
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
DTS Play-Fi®
2. Connect the mobile device to the network where this unit is connected.
3. Starting up Pioneer Music Control App will automatically display compatible
devices.
4. Select this device from the compatible devices. Then, a list of applications
such as a music streaming distribution service is displayed. Select the content
to play, and perform operation according to the on-screen instructions.
https://play-fi.com/
• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is
set to "Off " in the Home, manually turn the unit on and then press NET on the
remote controller. In the factory default setting, the Network Standby function
( p131) is set to On.
• For detailed operation and FAQ, visit the following URL.
http://intl.pioneer-audiovisual.com/playfi/info_p.html
• To use a music streaming distribution service, user registration may be
required.
• This unit does not support the following DTS Play-Fi functions.
–– Spotify
–– Wireless Surround Sound
–– Line In Rebroadcast
–– Internet Radio
–– Critical Listening
–– L/R Stereo Speaker Pairing
• Some of the settings in the "Setup menu" cannot be changed on this unit. To
change those settings, cancel the connection of this unit from the application.
• Listening modes cannot be selected during playback.
When connecting this unit to the same network as mobile devices, such as
a smartphone and tablet, you can enjoy music played on the mobile device
wirelessly. Music from a streaming distribution service or music in the music
library on a mobile device can be played. This function also supports a playlist on
iTunes. Also, connecting multiple speakers supporting DTS Play-Fi on the same
network will enable "Group playback" that plays the same music in separate
rooms at home. To enjoy this function, download Pioneer Music Control App
(available on iOS or Android™).
Playing Back
1. Download Pioneer Music Control App using your mobile device.
http://intl.pioneer-audiovisual.com/playfi/app_p.html
81
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
FlareConnectTM
When downloading Pioneer Remote App (available on iOS or Android™) to
mobile devices, such as a smartphone and tablet, you can enjoy the group
playback that plays the same music on multiple audio products supporting the
FlareConnect function. You can play audio from external playback devices
connected to each product, music from an Internet radio or network audio service
such as a music streaming distribution service, and music in the music library on
a mobile device.
Playing Back
1. Connect this unit and other devices supporting FlareConnect to the same
network.
2. Download Pioneer Remote App from App Store or Google Play™ Store.
3. Connect the mobile device to the network where this unit is connected.
4. Starting up Pioneer Remote App will automatically recognize compatible
devices.
5. Select the screen of the compatible device to operate, and tap the Group icon
at the bottom of the screen.
6. Add a check mark for the audio product on which you want to play the same
music.
7. Select the content to play, and operate according to the on-screen instructions.
• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is
set to "Off " in the Home, manually turn the unit on and then press NET on the
remote controller. In the factory default setting, the Network Standby function
( p131) is set to On. For other devices, check their respective instruction
manuals.
The illustration shows an image.
82
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
USB Storage Device
You can play music files stored on a USB storage device.
Basic Operations
TV’s REMOTE
INPUT
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. Plug your USB storage device with the music files into the USB port either on
the front panel or rear panel of this unit.
3. Press USB and select "USB Front" or "USB Rear".
• If the "USB" indicator blinks on the display, check whether the USB storage
device is plugged in properly.
• Do not unplug the USB storage device while "Connecting..." is being
displayed on the display. This may cause data corruption or malfunction.
4. Press ENTER in the next screen. The list of folders and music files on the
USB storage device is displayed. Select the folder with the cursors, and press
ENTER to confirm your selection.
5. Select the music file with the cursors, and then press ENTER to start playback.
Inputs
TV
HDMI 1
HDMI 2
HDMI 3
TV
USB
USB Front
/ / /
ENTER
The illustration shows an image.
83
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
• To return to the previous screen, press .
• To display an album title, artist name and album art of a file in WAV format,
make the folder structure and file names as shown below when saving music
files. The album art can be displayed by saving a .jpg file to display on the
screen in the folder of bottom level. Note that a large volume of .jpg file may
take time to be displayed, or may not be displayed.
Folder 1
Artist name
Folder 1-1
Album name
file 1-1
file 2-1
file 3-1
.jpg file
Folder 1-2
Album name
file 1-2
file 2-2
file 3-2
.jpg file
• Characters that cannot be displayed on this unit appear with ""
• The USB port of this unit complies with the USB 2.0 standard. The transfer
speed may be insufficient for some content you play, and sound interruptions,
etc. may occur.
• Note that operation is not always guaranteed for all USB storage devices.
• This unit can use USB storage devices that comply with the USB mass
storage class standard. Also the format of USB storage devices supports
FAT16 or FAT32 file system format.
❏❏ Device and Supported Format (
84
p85)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Device and Supported Format
USB Storage Device Requirements
WAV (.wav/.WAV):
WAV files contain uncompressed PCM digital audio.
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
• Quantization bit: 8 bit, 16 bit, 24 bit
• This unit can use USB storage devices that comply with the USB mass
storage class standard.
• The format of USB storage devices supports FAT16 or FAT32 file system
format.
• If the USB storage device has been partitioned, each section will be treated as
an independent device.
• Up to 20,000 tracks per folder are supported, and folders can be nested up to
16 levels deep.
• USB hubs and USB storage devices with hub functions are not supported. Do
not connect these devices to the unit.
• USB storage devices with security functions are not supported on this unit.
• If an AC adapter is supplied with the USB storage device, connect the AC
adapter, and use it with a household outlet.
• Media inserted to the USB card reader may not be available in this function.
Furthermore, depending on the USB storage device, proper reading of the
contents may not be possible.
• In use of a USB storage device, Our company accepts no responsibility
whatsoever for the loss or modification of data stored on a USB storage
device, or malfunction of the USB storage device. We recommend that you
back up the data stored on a USB storage device before using it with this unit.
AIFF (.aiff/.aif/.AIFF/.AIF):
AIFF files contain uncompressed PCM digital audio.
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
• Quantization bit: 8 bit, 16 bit, 24 bit
AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/.3G2):
• Supported formats: MPEG-2/MPEG-4 Audio
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Supported bitrates: Between 8 kbps and 320 kbps, and VBR
FLAC (.flac/.FLAC):
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
• Quantization bit: 8 bit, 16 bit, 24 bit
Apple Lossless (.m4a/.mp4/.M4A/.MP4):
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
• Quantization bit: 16 bit, 24 bit
DSD (.dsf/.dff/.DSF/.DFF):
• Supported formats: DSF/DSDIFF
• Supported sampling rates: 2.8 MHz, 5.6 MHz, 11.2 MHz
Supported Audio Formats
This unit supports the following music file formats. Note that sound files that are
protected by copyright cannot be played on this unit.
Dolby TrueHD (.vr/.mlp/.VR/.MLP):
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
MP3 (.mp3/.MP3):
• Supported formats: MPEG-1/MPEG-2 Audio Layer 3
• Supported sampling rates: 44.1 kHz, 48 kHz
• Supported bitrates: Between 8 kbps and 320 kbps, and VBR
• When playing files recorded with VBR (Variable bit-rate), the playback time
may not be displayed correctly.
• This unit supports the gapless playback of the USB storage device in the
following conditions.
When continuously playing WAV, FLAC and Apple Lossless files with the same
format, sampling frequency, the number of channels and quantization bit rate.
WMA (.wma/.WMA):
• Supported sampling rates: 44.1 kHz, 48 kHz
• Supported bitrates: Between 5 kbps and 320 kbps, and VBR
• WMA Pro/Voice/WMA Lossless formats are not supported.
85
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Playing back files on a PC and NAS (Music Server)
Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported.
• The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media® Player 11 or 12, or NASes
supporting the home network function. When using Windows Media® Player 11 or 12, you need to make the settings beforehand. Note that with PCs, only music files
registered in the library of Windows Media® Player can be played.
Windows Media® Player settings
On Windows Media® Player 11
1. Turn on your PC, and start Windows Media® Player 11.
2. In the "Library" menu, select "Media Sharing" to display a dialog box.
3. Select the "Share my media" check box, and then click "OK" to display the
compatible devices.
4. Select this unit, and then click "Allow".
• When it is clicked, the corresponding icon is checked.
5. Click "OK" to close the dialog.
• Depending on the version of Windows Media® Player, the names of items to
select may differ from the above description.
On Windows Media® Player 12
1. Turn on your PC, and start Windows Media® Player 12.
2. In the "Stream" menu, select "Turn on media streaming" to display a dialog
box.
• If the media streaming is already turned on, select "More streaming
options..." in the "Stream" menu to display the list of playback devices in the
network, and then go to step 4.
3. Click "Turn on media streaming" to display the list of playback devices in the
network.
4. Select this unit in "Media streaming options" and check that it is set to "Allow".
5. Click "OK" to close the dialog.
• Depending on the version of Windows Media® Player, the names of items to
select may differ from the above description.
❏❏ Playing Back (
86
p87)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Playing Back
Perform the following procedure when this unit is on.
1. Switch the input on the TV to the input connected to the unit.
2. Start the server (Windows Media® Player 11, Windows Media® Player 12, or
NAS device) containing the music files to play.
3. Make sure that the PC or NAS is properly connected to the same network as
this unit.
4. Press NET to display the network service list screen.
• If the "NET" indicator on the display blinks, the unit is not properly
connected to the network. Check the connection.
TV’s REMOTE
INPUT
Inputs
TV
HDMI 1
HDMI 2
HDMI 3
TV
Network
5. With the cursors, select "Music Server", and then press ENTER.
6. Select the target server with the cursors, and press ENTER to display the
items list screen.
• This unit cannot access pictures and videos stored on servers.
NET
The illustration shows an image.
/ / /
ENTER
87
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
• Depending on the server sharing settings, contents stored on the server
may not be displayed.
7. With the cursors, select the music file to play, and then press ENTER to start
playback.
• If "No Item" is displayed on the screen, check whether the network is
properly connected.
2. In the "Stream" menu, select "Turn on media streaming" to display a dialog
box.
• If the media streaming is already turned on, select "More streaming
options..." in the "Stream" menu to display the list of playback devices in the
network, and then go to step 4.
3. Click "Turn on media streaming" to display the list of playback devices in the
network.
4. Select this unit in "Media streaming options" and check that it is set to "Allow".
5. Click "OK" to close the dialog box.
6. Open the "Stream" menu and confirm that "Allow remote control of my
Player..." is checked.
• Depending on the version of Windows Media® Player, the names of items to
select may differ from the above description.
• To return to the previous screen, press .
• For music files on a server, up to 20,000 tracks per folder are supported, and
folders can be nested up to 16 levels deep.
• Depending on the type of media server, the unit may not recognize it, or may
not be able to play its music files.
Searching music files to select
If the server you use supports search functions, the following search function can
be used.
Perform the following procedure with available servers displayed using Music
Server.
1. With / , select the server containing music files you want to play, and
select ENTER.
2. With / , select the Search folder, and press ENTER. The Search folder
contains the following three folders.
• "Search by Artist": Select this when searching by artist name.
• "Search by Album": Select this when searching by album title.
• "Search by Track": Select this when searching by track title.
3. With / , select the folder, and press ENTER.
4. Input a character string to search for, and press ENTER. Then, the search
result is displayed.
5. With / , select the music files to play, and select ENTER.
Remote playback
1. Turn on the power of the unit.
2. Turn on your PC, and start Windows Media® Player 12.
3. Select and right-click the music file to play with Windows Media® Player 12.
• To remotely play a music file on another server, open the target server from
"Other Libraries", and select the music file to play.
4. Select this unit in "Play to" to open the "Play to" window of Windows Media®
Player 12, and start playback on this unit.
• If your PC is running on Windows® 8.1, click "Play to", and select this unit.
If your PC is running on Windows® 10, click "Cast to Device", and select
this unit. Operations during remote playback are possible from the "Play
to" window on the PC. The playback screen is displayed on the HDMIconnected TV.
5. Adjust the volume using the volume bar on the "Play to" window.
• Sometimes, the volume displayed on the remote playback window may
differ from the volume displayed on the display of this unit.
• When the volume is changed on this unit, the value is not reflected in the
"Play to" window.
• This unit cannot play music files remotely in the following conditions.
–– It is using a network service.
–– It is playing a music file on a USB storage device.
Controlling Remote Playback from a PC
You can use this unit to play music files stored on your PC by operating the PC
in your home network. The unit supports remote playback via Windows Media®
Player 12. To use the remote playback function of this unit with Windows Media®
Player 12, it must be configured beforehand.
Setting PC
1. Turn on your PC, and start Windows Media® Player 12.
88
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
• Depending on the version of Windows Media® Player, the names of items to
select may differ from the above description.
❏❏ Supported Audio Formats (
89
p90)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Supported Audio Formats
This unit supports the following music file formats. Remote play of FLAC and
DSD is not supported.
Apple Lossless (.m4a/.mp4/.M4A/.MP4):
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Quantization bit: 16 bit, 24 bit
MP3 (.mp3/.MP3):
• Supported formats: MPEG-1/MPEG-2 Audio Layer 3
• Supported sampling rates: 44.1 kHz, 48 kHz
• Supported bitrates: Between 8 kbps and 320 kbps, and VBR
DSD (.dsf/.dff/.DSF/.DFF):
• Supported formats: DSF/DSDIFF
• Supported sampling rates: 2.8 MHz, 5.6 MHz, 11.2 MHz
WMA (.wma/.WMA):
• Supported sampling rates: 44.1 kHz, 48 kHz
• Supported bitrates: Between 5 kbps and 320 kbps, and VBR
• WMA Pro/Voice/WMA Lossless formats are not supported.
• When playing files recorded with VBR (Variable bit-rate), the playback time
may not be displayed correctly.
• Remote playback does not support the gapless playback.
WAV (.wav/.WAV):
WAV files contain uncompressed PCM digital audio.
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
• Quantization bit: 8 bit, 16 bit, 24 bit
AIFF (.aiff/.aif/.AIFF/.AIF):
AIFF files contain uncompressed PCM digital audio.
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
• Quantization bit: 8 bit, 16 bit, 24 bit
AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/.3G2):
• Supported formats: MPEG-2/MPEG-4 Audio
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Supported bitrates: Between 8 kbps and 320 kbps, and VBR
FLAC (.flac/.FLAC):
• Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
• Quantization bit: 8 bit, 16 bit, 24 bit
LPCM (Linear PCM):
• Supported sampling rates: 44.1 kHz, 48 kHz
• Quantization bit: 16 bit
90
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Play Queue
Adding Play Queue Information
1. Select the "INPUT" input on the application screen, and tap the "USB" icon.
Or, select the "NET" input, and tap the "USB" icon or "Music Server" icon.
(Depending on the model, the icon names may be different.)
When downloading Pioneer Remote App (available on iOS or Android™) to
mobile devices, such as a smartphone and tablet, you can save your favorite
playlist (Play Queue information) among music files stored in the USB storage
device connected to this unit and music files stored in PC or NAS connected to
the same network as this unit, and you can play the music on the playlist. The
Play Queue information is effective until the power cord of this unit is removed
from the outlet.
Initial Setup
1. Connect this unit to your home network by the network settings on this unit.
2. Download Pioneer Remote App from App Store or Google Play™ Store.
3. Connect the mobile device to the network where this unit is connected.
4. Start up Pioneer Remote App, and select this unit.
2. Tapping the "+" icon of the track you wan to add will open the pop-up to add
the Play Queue information.
3. Touch the "Play Now
track to Play Queue.
91
", "Play Next
" or "Play Last
" icon to add the
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
• If there are no tracks on the Play Queue list, only "Play Now
displayed.
" is
3. To delete a track, slide the track to the left until the trash icon changes to " ".
If the device is on iOS, slide the "
" icon to the left. Releasing your finger will
delete the track from Play Queue.
Sort and Delete
1. Select the "NET" input, tap the "Play Queue" icon, and enter the Play Queue
service screen.
Playing Back
2. Tap the "
Playback starts when you select "Play Now
the track in the Play Queue service screen.
" icon of the track to sort, and drag the icon to the destination.
92
" for Play Queue addition, or select
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Listening To the AM/FM Radio
You can receive AM and FM radio stations on this unit with the built-in tuner.
Tuning into a Radio Station
Perform the following procedure when this unit is on.
Tuning Automatically
1. Press TUNER repeatedly to select either "AM" or "FM".
2. Press MODE to display "TunMode: Auto" on the display.
3. When you press the cursors / , automatic tuning starts, and searching
stops when a station is found. When tuned in to a radio station, the "TUNED"
indicator on the display lights up. When tuned in to an FM radio station, the
"STEREO" indicator lights up.
TUNER
/ / /
ENTER
MODE
93
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
When FM broadcasts reception is poor: Perform the procedure for "Tuning
Manually" ( p94). Note that if you tune manually, the reception for FM
broadcasts will be monaural rather than stereo, irrespective of the sensitivity of
the reception.
Tuning Manually
Note that if you tune manually, the reception for FM broadcasts will be monaural
rather than stereo, irrespective of the sensitivity of the reception.
1. Press TUNER repeatedly to select either "AM" or "FM".
2. Press MODE to display "TunMode: Manual" on the display.
3. While pressing the cursors / , select the desired radio station.
• Each time you press the cursors / , the frequency changes by 1 step.
If the button is held down, the frequency changes continuously, and if the
button is released, the frequency stops changing.
Frequency step setting
Press
on the remote controller, and from Home displayed select "System
Setup" - "Miscellaneous" - "Tuner" - "AM/FM Frequency Step" or "AM Frequency
Step", and then select the frequency step for your area. Note that when this
setting is changed, all radio presets are deleted.
❏❏ Presetting a Radio Station (
94
p95)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Presetting a Radio Station
Registration Procedure
You can preset up to 40 of your favorite AM/FM radio stations.
After tuning in to the AM/FM radio station you want to register, perform the
following procedure.
1. Press +Fav so that the preset number on the display blinks.
2. While the preset number is blinking (approx. 8 seconds), repeatedly press the
cursors / to select a number between 1 and 40.
3. Press +Fav again to register the station.
When the station is registered, the preset number stops blinking. Repeat this
steps to register your favorite AM/FM radio stations.
TUNER
/ / /
ENTER
CLEAR
+Fav
95
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Selecting a Preset Radio Station
1. Press TUNER.
2. Press the cursors
/
to select a preset number.
Deleting a Preset Radio Station
1. Press TUNER.
2. Press the cursors / to select the preset number to delete.
3. After pressing +Fav, press CLEAR while the preset number is blinking,
and delete the preset number. When deleted, the number on the display
disappears.
❏❏ Using RDS (European, Australian and Asian
models) ( p97)
96
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Using RDS (European, Australian and Asian models)
RDS stands for Radio Data System, and is a method of transmitting data in FM
radio signals. In regions where RDS can be used, when you tune in to a radio
station broadcasting program information, the radio station name is displayed on
the display. When you press
on the remote controller in this state, you can use
the following functions.
characters. This is not a malfunction. Also, if the signal from a station is weak,
information may not be displayed.
Display Text Information (Radio Text)
1. While the name of the station is being displayed on the display, press
on
the remote controller once.
The Radio Text (RT), which is text information delivered by the station, is
displayed scrolling across the display. "No Text Data" is displayed when no
text information is delivered.
Search for Stations by Program Type
1. While the name of the station is being displayed on the display, press
on
the remote controller twice.
2. Press the cursors / on the remote controller to select the Program Type
you want to search for, and then press the ENTER button to start the search.
• The Program Types displayed are as follows: None / News (News reports) /
Affairs (Current affairs) / Info (Information) / Sport / Educate (Education) /
Drama / Culture / Science (Science and technology) / Varied / Pop M (Pop
music) / Rock M (Rock music) / Easy M (Middle of the road music) / Light M
(Light classics) / Classics (Serious classics) / Other M (Other music) /
Weather / Finance / Children (Children's programmes) / Social (Social
affairs) / Religion / Phone In / Travel / Leisure / Jazz (Jazz music) / Country
(Country music) / Nation M (National music) / Oldies (Oldies music) / Folk
M (Folk music) / Document (Documentary)
• The information displayed may not match the content delivered by the
station.
3. When a station is found, the station blinks on the display. Pressing the ENTER
button in this state will receive that station. If you don't press the ENTER
button, the unit starts to search for another station.
• If no stations are found, the message "Not Found" is displayed.
• Unusual characters may be displayed when the unit receives unsupported
97
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Multi-zone
You can enjoy 2-ch audio in the separate room (ZONE 2/ZONE 3) while performing playback in the main room (where this unit is located). The same source can be
played back in the main room and ZONE 2/ZONE 3 simultaneously. Also, different sources can be played back in both rooms. For the "NET", "BLUETOOTH", or "USB"
input selector, you can select only the same source for the main room and separate room. If you select "NET" in the main room and then select "BLUETOOTH" in the
separate room, the main room setting switches to "BLUETOOTH". You cannot select different stations of AM/FM broadcasts for the main room and separate room.
Pioneer Remote App is useful for the multi-zone playback operation. Download Pioneer Remote App (available on iOS or Android™) to a mobile device, such as a
smartphone and tablet to use it.
❏❏ Switch remote control mode (
98
p99)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Switch remote control mode (ZONE 2)
At the time of purchase, the remote controller is in the mode to control playback
in the main room. To play a source in ZONE 2, set the remote controller to the
ZONE control mode (ZONE 2). To control the main room play again, restore the
remote controller to the main room control mode.
1. While pressing and holding MODE, press ZONE 2 at least 3 seconds until the
remote indicator blinks twice.
• The mode of the remote controller switches to the mode to control ZONE 2.
• To restore the main room control mode, while pressing and holding MODE,
press MAIN at least 3 seconds until the remote indicator blinks once.
Setting the ZONE
control mode (ZONE 2)
Setting the ZONE control mode
(ZONE 2)
Setting the main room control
mode
Setting the main room
control mode
ZONE 2
MAIN
MODE
99
Front Panel≫ Rear Panel≫ Remote≫
MODE
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Switch remote control mode (ZONE 3)
Setting the ZONE
control mode (ZONE 3)
Setting the main room
control mode
At the time of purchase, the remote controller is in the mode to control playback
in the main room. Settings are required to playback a source in ZONE 3.
When outputting from the speakers: Set "Speaker" - "Configuration" - "Zone
Speaker" in the System Setup menu ( p123) to "Zone 2/Zone 3", and set the
remote controller to ZONE control mode (ZONE 3). To operate the playback of
the main room again, it is necessary to return the remote controller to the main
room control mode.
When outputting from the integrated amplifier or the power amplifier:
Set "Speaker" - "Configuration" in the System Setup ( p122) to one of the
following, and set the remote controller to ZONE control mode (ZONE 3). To
operate the playback of the main room again, it is necessary to return the remote
controller to the main room control mode.
–– Set "Speaker Channels" to "2.1 ch", "3.1 ch", "4.1 ch", or "5.1 ch"
–– Set "Speaker Channels" to "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or "5.1.2 ch", and
set "Bi-Amp" and "Zone Speaker" to "No"
1. While pressing and holding MODE, press ZONE 3 at least 3 seconds until the
remote indicator blinks three times.
• The mode of the remote controller switches to the mode to control ZONE 3.
• To restore the main room control mode, while pressing and holding MODE,
press MAIN at least 3 seconds until the remote indicator blinks once.
Setting the ZONE control mode
(ZONE 3)
ZONE 3
Setting the main room control
mode
MAIN
MODE
100
Front Panel≫ Rear Panel≫ Remote≫
MODE
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Playing Back
Set the remote controller to the ZONE control mode (ZONE 2/ZONE 3)
( p99, 100), and then perform the following operations.
1. Point the remote controller at the unit, and press .
• "Z2" or "Z3" on the display of the main unit lights up.
• ZONE 3 cannot be turned ON unless "Speaker" - "Configuration" - "Zone
Speaker" in the System Setup menu ( p123) is not set to "Zone 2/Zone 3".
2. Press the input selector of the input source you want to play in the separate
room. When operating on the main unit, press the ZONE CONTROL button
repeatedly to select "Z2" or "Z3", and select the input to playback in other
room with the input selector dial within 8 seconds.
3. If the unit is connected to the pre-main amplifier in the separate room,
adjust the volume on the pre-main amplifier. If the unit is connected to the
power amplifier or ZONE speaker in the separate room, adjust the volume
on the remote controller. When operating on the main unit, press the ZONE
CONTROL button repeatedly to select "Z2" or "Z3", and adjust with the
MASTER VOLUME dial within 8 seconds.
• When adjusting the volume of the power amplifier placed in the separate
room by using this unit, set "Multi Zone" - "Zone 2" (or "Zone 3") - "Output
Level" ( p135) to "Variable" on the System Setup menu.
• Information of a connected device can be displayed on the TV in the
separate room. Set the remote controller to the ZONE control mode (ZONE
2), and then press .
• If you turn the unit to standby during multi-zone playback, the Z2 or Z3
indicator is dimmed, and the playback mode is switched to playback in a
separate room only. Setting ZONE 2/ZONE 3 to on while the unit is in standby
also switches the playback mode to playback in a separate room only.
• For ZONE 2 output, audio from externally connected AV components can
be output only when it is an analog or 2ch PCM audio signal. When the AV
component is connected to this unit with an HDMI cable, digital coaxial cable
or digital optical cable, change the audio output of the AV component to the
PCM output.
101
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
• When video and audio via HDMI input are output to ZONE 2, set "Input/Output
Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( p118) to "Use" on the System
Setup menu.
• For ZONE 3 output, audio from externally connected AV components can be
output only when it is an analog audio signal.
• DSD and Dolby TrueHD audio signals cannot be output to ZONE 2/ZONE 3
when selected with the "NET" or "USB" input selector.
• If ZONE 2/ZONE 3 is on, power consumption during standby will increase.
To set the function to off: Press while the remote controller is in the ZONE
control mode. When operating on the main unit, press the ZONE 2 ON/OFF or
ZONE 3 ON/OFF button.
MULTI-ZONE MUSIC: If you press MULTI-ZONE MUSIC while playback is being
performed in the main room, the MULTI-ZONE MUSIC is turned on, "Z2" and "Z3"
on the display light at the same time and the playback sources of all the rooms
are switched to the same source at once.
• The sources that can be played in ZONE 2 can be played in all rooms.
• This function cannot be used if headphones are connected or audio is output
from the speakers of the TV.
• Depending on the setting of "Speaker" - "Configuration" in the System Setup
menu ( p122), it may not be able to output to ZONE 3.
102
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Listening Mode
You can change the listening mode during play by pressing repeatedly "AUTO/DIRECT", "SURR", or "STEREO".
Selecting a Listening mode
• Each of AUTO/DIRECT, SURR, and STEREO buttons stores the listening
mode that was selected last. If content incompatible of the listening mode
selected last is played, the most standard listening mode for the content is
automatically selected.
• For details of the effects of each listening mode, refer to "Listening Mode
Effects" ( p106).
• For listening modes selectable for each audio format of input signals, refer to
"Selectable Listening Modes" ( p109).
AUTO/DIRECT
SURR
STEREO
103
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ AUTO/DIRECT button
„„ SURR button
Press repeatedly and the listening modes suited to the input signal are switched
between "Auto Surround", "Direct", and "Pure Direct". After selecting one of them,
"Auto Surround" (or "Direct" or "Pure Direct") is displayed, then the most suitable
listening mode for the audio format is selected automatically (DTS for multichannel input signals, Stereo for 2 channel input signals, etc.) and an indicator
such as "DTS" is displayed on the display.
By pressing repeatedly you can select the audio format of the signals being input
and switch between a variety of listening modes. Select the mode that suits your
preference. The selected listening mode is displayed on the display.
„„ STEREO button
The display changes automatically.
You can select the "Stereo" mode to playback only from the front speakers and
subwoofer.
For details on the effects of each of the listening modes see "Listening Mode
Effects". For listening modes selectable for each of the audio formats in the input
signals, refer to "Selectable listening modes".
The "Direct" mode shuts down some processing that can affect sound quality,
such as the tone control features, so you can enjoy even better sound quality.
The "Pure Direct" mode shuts down even more processes that affects sound
quality, so you get a more faithful reproduction of the original sound. In this case,
the speaker calibration made with MCACC is invalid.
104
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Checking the input format and listening mode
Pressing
order.
repeatedly will switch the display of the main unit in the following
Input source and volume
Listening mode
Input format
The display is switched in
a few seconds.
Sampling frequency
Input signal resolution
105
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Listening Mode Effects
In alphabetical order
„„ Action
Mode suitable for movies with a lot of action scenes.
„„ AdvancedGame
Mode suitable for game content.
„„ Classical
Suitable for classical or operatic music. This mode emphasizes the surround
channels in order to widen the sound image, and simulates the natural
reverberation of a large hall.
„„ Dolby Atmos
This mode faithfully reproduces the sound design recorded in the Dolby Atmos
audio format.
The Dolby Atmos audio format has been implemented in movie theaters
equipped with the latest facilities, and enables a revolutionary sound experience
in home theaters. Unlike existing surround systems, Dolby Atmos doesn't rely on
channels, but rather enables the accurate placement of sound objects that have
independent motion in a three-dimensional space with even greater clarity. Dolby
Atmos is an optional audio format for Blu-ray Discs and achieves a more threedimensional sound field by introducing a sound field above the listener.
• To enable transfer of this audio format, connect via an HDMI cable and set
audio output on the player to Bitstream output.
„„
DD (Dolby Audio - DD)
This mode faithfully reproduces the sound design recorded in the Dolby Digital
audio format.
Dolby Digital is a multi-channel digital format developed by Dolby Laboratories,
Inc. and is widely adopted for use in movie production. It is also a standard audio
format for DVD-Video and Blu-ray Discs. It is possible to record a maximum of
5.1 channels on a DVD-Video or Blu-ray Disc; two front channels, one center
channel, two surround channels, and the LFE channel dedicated to the bass
region (sound elements for the subwoofer).
• To enable transfer of this audio format, connect via a digital cable and set
audio output on the player to Bitstream output.
„„
DD+ (Dolby Audio - DD+)
This mode faithfully reproduces the sound design recorded in the Dolby Digital
Plus audio format.
The Dolby Digital Plus format has been improved based on Dolby Digital,
increasing the number of channels and endeavoring to improve sound quality
by giving more flexibility in data bit rates. Dolby Digital Plus is an optional audio
format based on 5.1ch for Blu-ray Discs. It is possible to record a maximum of 7.1
channels with additional channels such as the surround back channel.
• To enable transfer of this audio format, connect via an HDMI cable and set
audio output on the player to Bitstream output.
„„
DSur (Dolby Audio - DSur)
This listening mode expands actual channels to more channels for playback to
suit the configuration of the connected speakers by expanding the input signals
from 2 channels or 5.1 channels to 5.1 channels or 7.1 channels respectively. As
well as traditional speaker setups, this supports ceiling-embedded speakers and
playback systems for Dolby Atmos that adopt the Dolby speaker technology.
„„
DTHD (Dolby Audio - TrueHD)
This mode faithfully reproduces the sound design recorded in the Dolby TrueHD
audio format.
The Dolby TrueHD audio format is a "lossless" format expanded based on the
lossless compression technology referred to as MLP, and it faithfully reproduces
the master audio recorded in the studio. Dolby TrueHD is an optional audio
format based on 5.1ch for Blu-ray Discs. It is possible to record a maximum of 7.1
channels with additional channels such as the surround back channel. 7.1ch is
recorded at 96 kHz/24 bit, and 5.1ch is recorded at 192 kHz/24 bit.
• To enable transfer of this audio format, connect via an HDMI cable and set
audio output on the player to Bitstream output.
106
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Drama
„„ DTS Express
Suitable for TV shows produced in a TV studio. This mode enhances the
surround effects to the entire sound to give clarity to voices and create a realistic
acoustic image.
This mode faithfully reproduces the sound design recorded in the DTS Express
audio format.
DTS Express is an optional audio format based on 5.1ch for Blu-ray Discs. It is
possible to record a maximum of 7.1 channels with additional channels such as
the surround back channel. It also supports low bit rates.
• To enable transfer of this audio format, connect via an HDMI cable and set
audio output on the player to Bitstream output.
„„ DSD
This mode is suitable for playing sources recorded in DSD.
• This unit supports the DSD signal input from the HDMI input terminal.
However, depending on the connected player, better sound may be obtained
by setting the output on the player side to the PCM output.
• This listening mode cannot be selected if the output setting on your Blu-ray
Disc/DVD player is not set to DSD.
„„ DTS
This mode faithfully reproduces the sound design recorded in the DTS audio
format.
The DTS audio format is a multi-channel digital format developed by DTS, Inc.
This format is an optional audio format for DVD-Video and a standard format
for Blu-ray Discs.It enables recording of 5.1 channels; two front channels, one
center channel, two surround channels, and the LFE channel dedicated to the
bass region (sound elements for the subwoofer). The content is recorded with a
rich volume of data, with a maximum sampling rate of 48 kHz, at a resolution of
24 bits and a bit rate of 1.5 Mbps.
• To enable transfer of this audio format, connect via a digital cable and set
audio output on the player to Bitstream output.
„„ DTS 96/24
This mode faithfully reproduces the sound design recorded in the DTS 96/24
audio format.
The DTS 96/24 format is an optional audio format for DVD-Video and Blu-ray
Discs. It enables recording of 5.1 channels; two front channels, one center
channel, two surround channels, and the LFE channel dedicated to the bass
region (sound elements for the subwoofer). Detailed reproduction is achieved by
recording the content at a sampling rate of 96 kHz and at a resolution of 24 bits.
• To enable transfer of this audio format, connect via a digital cable and set
audio output on the player to Bitstream output.
„„ DTS-HD HR (DTS-HD High Resolution Audio)
This mode faithfully reproduces the sound design recorded in the DTS-HD High
Resolution Audio audio format.
DTS-HD High Resolution Audio is an optional audio format based on 5.1ch for
Blu-ray Discs. It is possible to record a maximum of 7.1 channels with additional
channels such as the surround back channel at a sampling rate of 96 kHz and at
a resolution of 24 bits.
• To enable transfer of this audio format, connect via an HDMI cable and set
audio output on the player to Bitstream output.
„„ DTS-HD MSTR (DTS-HD Master Audio)
This mode faithfully reproduces the sound design recorded in the DTS-HD
Master Audio audio format.
DTS-HD Master Audio is an optional audio format based on 5.1ch for Bluray Discs. It is possible to record a maximum of 7.1 channels with additional
channels such as the surround back channel using the lossless audio
reproduction technology. 96 kHz/24 bit is supported for 7.1ch, and 192 kHz/24 bit
is supported for 5.1ch.
• To enable transfer of this audio format, connect via an HDMI cable and set
audio output on the player to Bitstream output.
„„ DTS Neural:X
This listening mode expands actual channels to more channels for playback to
suit the configuration of the connected speakers by expanding the input signals
from 2 channels or 5.1 channels to 5.1 channels or 7.1 channels respectively.
107
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ DTS:X
„„ Ext.Stereo (Extended Stereo)
This mode faithfully reproduces the sound design recorded in the DTS:X audio
format.
The DTS:X audio format is a combination of the mixing method based on
traditional channel based formats (5.1ch and 7.1ch) and object based dynamic
audio mixing, and it is characterized by the precise positioning of sounds and the
ability to express sound movement.
• To enable transfer of this audio format, connect via an HDMI cable and set
audio output on the player to Bitstream output.
This mode is ideal for background music. Stereo sound is played through the
surround speakers as well as the front speakers, creating a stereo image.
„„ F.S.Surround (Front Stage Surround)
In this mode, you can enjoy a virtual playback of multichannel surround sound
even with only two or three speakers. This works by controlling how sounds
reach the listener' s left and right ears.
„„ Mono
„„ ES Discrete (DTS-ES Discrete)
In this mode, when the input signal is analog or PCM, the left and right front
speakers output the sound in monaural.
This mode faithfully reproduces the sound design recorded in the DTS-ES
Discrete audio format.
DTS-ES Discrete is an optional audio format based on 5.1ch for DVD-Video and
Blu-ray Discs. It is possible to record a maximum of 6.1 channels with a monaural
surround back channel added.
• To enable transfer of this audio format, connect via a digital cable and set
audio output on the player to Bitstream output.
„„ PCM
Mode suitable for playing sources recorded in multichannel PCM.
„„ Rock/Pop
Mode suitable for rock content.
„„ ES Matrix (DTS-ES Matrix)
This mode faithfully reproduces the sound design recorded in the DTS-ES Matrix
audio format.
DTS-ES Matrix is an optional audio format based on 5.1ch for DVD-Video and
Blu-ray Discs. A monaural surround back channel is inserted to this format by
matrix encoding. During playback, 6.1 channel-playback is achieved by the matrix
decoder on this unit.
• To enable transfer of this audio format, connect via a digital cable and set
audio output on the player to Bitstream output.
„„ Ent.Show (Entertainment Show)
„„ Sports
Mode suitable for sport content.
„„ Stereo
In this mode, sound is output from the right and left front speakers and
subwoofer.
„„ Unplugged
Suitable for acoustic instruments, vocals and jazz. This mode emphasizes the
front sound field image, giving the impression of being in front of the stage.
Suitable for rock or pop music. Listening to music in this mode creates a lively
sound field with a powerful acoustic image, like being at a club or rock concert.
„„ Ext.Mono (Extended Mono)
In this mode, all speakers output the same sound in mono, so the sound you hear
is the same regardless of where you are within the listening room.
108
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Selectable listening modes
You can select a variety of listening modes
according to the audio format of the signal to be
input.
• The Stereo mode can be selected with any audio
format.
• When analog signals are being input in the Pure
Direct mode, the modes switches to the Analog
Direct mode which passes signals directly to the
amplifier without passing through the DSP (Digital
Signal Processor).
• Listening modes available when headphones are
connected are Pure Direct and Stereo only.
„„ Selectable listening modes
Input Format
Listening Mode
Analog
Stereo
Input Format
Listening Mode
PCM
Music files (except DSD/
Dolby TrueHD)
Stereo
Mono
DSur
Classical*2
Unplugged*2
Classical*1
Ent.Show*2
Unplugged*1
Drama*2
Ent.Show*1
AdvancedGame*2
Drama*1
Action*2
AdvancedGame*1
Rock/Pop*2
Action*1
Sports*2
Rock/Pop*1
Ext.Stereo*3
Sports*1
Ext.Mono*3
Ext.Stereo*2
F.S.Surround
Surround speakers or height speakers need to be installed.
*2 A center speaker, surround speakers, or height speakers need to be
installed.
*1
109
DSur
DTS Neural:X*1
DTS Neural:X
Ext.Mono*2
Mono
F.S.Surround
Cannot be selected when the input format is monaural.
*2 Surround speakers or height speakers need to be installed.
*3 A center speaker, surround speakers, or height speakers need to be
installed.
*1
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Input Format
Listening Mode
Input Format
Listening Mode
Input Format
Listening Mode
Multich PCM
Stereo
DSD
• You cannot select any
mode other than Pure
Direct if the sampling
rate is 11.2 MHz.
Stereo
Dolby Atmos
• You can select the
DD+ or
DTHD
listening modes if
surround back speakers
or height speakers are
not connected.
Stereo
PCM
*1
DSur
DTS Neural:X
Classical*2
Unplugged
Ent.Show
Drama
DTS Neural:X
Unplugged
*2
Ent.Show
*2
Drama
*2
*3
Action
*2
Sports*2
Sports*3
Ext.Stereo*3
Ext.Stereo*4
Ext.Mono
Ext.Mono
*3
A center speaker or surround speakers need to be installed.
*2 Surround speakers or height speakers need to be installed.
*3 A center speaker, surround speakers, or height speakers need to be
installed.
*3
*3
Rock/Pop*3
Classical
Unplugged
Ent.Show
Drama
Action
*3
Rock/Pop*2
Dolby Atmos
AdvancedGame
*3
AdvancedGame
*2
F.S.Surround
*1
DSur
Classical*3
AdvancedGame
Action
DSD
*1 *2
Rock/Pop
Sports
Ext.Stereo
Ext.Mono
F.S.Surround
*4
F.S.Surround
Cannot be selected when the input format is monaural or 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Surround speakers or height speakers need to be installed.
*4 A center speaker, surround speakers, or height speakers need to be
installed.
*1
110
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Input Format
DD
Listening Mode
Input Format
Stereo
DD+
DD
Input Format
Stereo
DTHD
DD+
*1 *2
Listening Mode
Stereo
DTHD*1 *2
*1 *2
DSur
DTS Neural:X*3
DSur
DTS Neural:X*3
DSur
DTS Neural:X*3
Classical*4
Classical*4
Classical*4
Unplugged
Ent.Show
Drama
Unplugged
*4
Ent.Show
*4
Drama
*4
AdvancedGame
Unplugged*4
*4
Ent.Show*4
*4
Drama*4
*4
AdvancedGame
*4
AdvancedGame*4
*4
Action*4
Action*4
Action*4
Rock/Pop*4
Rock/Pop*4
Rock/Pop*4
Sports
Sports
Sports*4
*4
*4
Ext.Stereo
Ext.Stereo
Ext.Stereo*5
Ext.Mono
Ext.Mono
Ext.Mono*5
*5
*5
*5
F.S.Surround
Cannot be selected when the input format is 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Cannot be selected when the input format is monaural.
*4 Surround speakers or height speakers need to be installed.
*5 A center speaker, surround speakers, or height speakers need to be
installed.
*1
Listening Mode
*5
F.S.Surround
Cannot be selected when the input format is 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Cannot be selected when the input format is monaural.
*4 Surround speakers or height speakers need to be installed.
*5 A center speaker, surround speakers, or height speakers need to be
installed.
*1
111
F.S.Surround
Cannot be selected when the input format is 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Cannot be selected when the input format is monaural.
*4 Surround speakers or height speakers need to be installed.
*5 A center speaker, surround speakers, or height speakers need to be
installed.
*1
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Input Format
DTS
Listening Mode
Stereo
DTS*1 *2
Input Format
DTS 96/24
Stereo
DTS 96/24*1 *2
Input Format
DTS Express
Listening Mode
Stereo
DTS Express*1 *2
DSur
DTS Neural:X*3
DSur
DTS Neural:X*3
DSur
DTS Neural:X*3
Classical*4
Classical*4
Classical*4
Unplugged*4
Unplugged*4
Unplugged*4
Ent.Show
Ent.Show
Ent.Show*4
Drama
*4
Drama
*4
AdvancedGame
Action
*4
Drama*4
*4
AdvancedGame
*4
Action
*4
Rock/Pop
AdvancedGame*4
*4
Action*4
*4
Rock/Pop
*4
Rock/Pop*4
*4
Sports*4
Sports*4
Ext.Stereo*5
Ext.Stereo*5
Ext.Stereo*5
Ext.Mono
Ext.Mono
Ext.Mono*5
*5
F.S.Surround
Cannot be selected when the input format is 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Cannot be selected when the input format is monaural.
*4 Surround speakers or height speakers need to be installed.
*5 A center speaker, surround speakers, or height speakers need to be
installed.
*1
Listening Mode
Sports*4
*5
F.S.Surround
Cannot be selected when the input format is 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Cannot be selected when the input format is monaural.
*4 Surround speakers or height speakers need to be installed.
*5 A center speaker, surround speakers, or height speakers need to be
installed.
*1
112
F.S.Surround
Cannot be selected when the input format is 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Cannot be selected when the input format is monaural.
*4 Surround speakers or height speakers need to be installed.
*5 A center speaker, surround speakers, or height speakers need to be
installed.
*1
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Input Format
DTS-HD HR
Listening Mode
Stereo
DTS-HD HR*1 *2
Input Format
DTS-HD MSTR
Stereo
DTS-HD MSTR*1 *2
Input Format
DTS-ES
Listening Mode
Stereo
DTS*1
DSur
DTS Neural:X*3
DSur
DTS Neural:X*3
ES Matrix*2
Classical*4
Classical*4
Unplugged*4
Unplugged*4
DSur
DTS Neural:X
Ent.Show*4
Ent.Show*4
Classical*3
Drama
Drama
*4
AdvancedGame
ES Discrete*2
*4
Unplugged*3
AdvancedGame
*4
*4
Ent.Show*3
Action*4
Action*4
Drama*3
Rock/Pop*4
Rock/Pop*4
AdvancedGame*3
Sports*4
Sports*4
Action*3
Ext.Stereo*5
Ext.Stereo*5
Rock/Pop*3
Ext.Mono
Ext.Mono
Sports*3
*5
F.S.Surround
Cannot be selected when the input format is 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Cannot be selected when the input format is monaural.
*4 Surround speakers or height speakers need to be installed.
*5 A center speaker, surround speakers, or height speakers need to be
installed.
*1
Listening Mode
*5
F.S.Surround
Cannot be selected when the input format is 2 ch.
*2 A center speaker or surround speakers need to be installed.
*3 Cannot be selected when the input format is monaural.
*4 Surround speakers or height speakers need to be installed.
*5 A center speaker, surround speakers, or height speakers need to be
installed.
Ext.Stereo*4
Ext.Mono*4
*1
113
F.S.Surround
This can only be selected when no surround back speaker is connected.
*2 Surround back speakers need to be installed.
*3 Surround speakers or height speakers need to be installed.
*4 A center speaker, surround speakers, or height speakers need to be
installed.
*1
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Input Format
Listening Mode
DTS:X
Stereo
DTS:X
Classical*1
Unplugged*1
Ent.Show*1
Drama*1
AdvancedGame*1
Action*1
Rock/Pop*1
Sports*1
Ext.Stereo*2
Ext.Mono*2
F.S.Surround
Surround speakers or height speakers need to be installed.
*2 A center speaker, surround speakers, or height speakers need to be
installed.
*1
114
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
System Setup
Menu list
You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations" (
Input/Output
Assign
TV Out / OSD
HDMI Input
Video Input
Digital Audio Input
Analog Audio Input
Input Skip
p117).
Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
Change input assignment between the input selectors and HDMI IN jacks.
Change input assignment between the input selectors and COMPONENT VIDEO IN jacks and the
VIDEO IN jacks.
Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks.
Change input assignment between the input selectors and AUDIO IN jacks.
You can skip inputs to which nothing is connected when selecting them with the INPUT
SELECTOR dial on the main unit or with the input selectors on the remote controller.
p118
p119
p119
p120
p120
p121
Speaker
Configuration
Crossover
Distance
Channel Level
Dolby Enabled Speaker
Change the settings of connection environment of the speakers.
Change the settings of crossover frequencies.
Set the distance from each speaker to the listening position.
Adjust the volume level of each speaker.
Change the settings of Dolby Enabled Speakers.
p122
p123
p124
p125
p126
Audio Adjust
Dual Mono / Mono
Dolby
Volume
Change the settings of multiplex audio playback.
Change the setting of when Dolby signals are input.
Change the Volume settings.
p127
p127
p127
Source
Input Volume Absorber
Adjust the volume level when there are differences in volume level among multiple devices
connected to this unit.
Set an easy name for each input.
Select the priority for input selection when multiple audio sources are connected to one input
selector.
p128
Name Edit
Audio Select
115
Front Panel≫ Rear Panel≫ Remote≫
p128
p128
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Hardware
HDMI
Power Management
12V Trigger A
12V Trigger B
Change the settings for the HDMI functions.
Change the settings for the power-save function.
Change the settings for 12V TRIGGER OUT A port.
Change the settings for 12V TRIGGER OUT B port.
p129
p131
p132
p133
Multi Zone
Zone 2
Zone 3
Remote Play Zone
Change the settings for Zone 2.
Change the settings for Zone 3.
Change the settings for remote play.
p135
p136
p136
Miscellaneous
Tuner
Remote ID
Firmware Update
Initial Setup
Lock
Change the frequency step for the tuner.
Change the remote controller ID.
Change the settings for Firmware Update.
Make the initial setup from the setup menu.
Lock the Setup menu so that the settings cannot be changed.
p137
p137
p137
p137
p137
116
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Menu operations
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press
on the remote controller to display the Home screen, then select System
Setup with the cursors on the remote controller and press ENTER.
Select the item with the cursor / / / buttons of the remote controller and
press ENTER to confirm your selection.
Use the cursors / to change the default values.
• To return to the previous screen, press .
• To exit the settings, press .
117
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Input/Output Assign
„„ TV Out / OSD
Make settings for TV output and On-Screen Displays (OSD) that appear on the
TV.
Setting Item
Default Value
Setting Details
HDMI Out
MAIN
Select the HDMI jack to be connected with the TV.
"MAIN": When connecting the TV to the HDMI OUT
MAIN jack
"SUB": When connecting the TV to the HDMI OUT
SUB jack
"MAIN+SUB": When connecting to both the MAIN
and SUB jacks
Dolby Vision
1080p -> 4K
Upscaling
MAIN
Off
To output Dolby Vision video from the player to
a TV that supports Dolby Vision, select either
the HDMI OUT MAIN jack or HDMI OUT SUB
jack to which the Dolby Vision-supported TV is
connected. This setting is only necessary if you
have set "HDMI Out" to "MAIN+SUB" and you have
connected a TV to both the MAIN and SUB jacks.
"MAIN": To output Dolby Vision video to a Dolby
Vision-supported TV connected to the HDMI OUT
MAIN jack.
"SUB": To output Dolby Vision video to a Dolby
Vision-supported TV connected to the HDMI OUT
SUB jack.
• After selecting "MAIN" or "SUB", if the video
on the TV does not appear correctly, set this to
"Off".
Setting Item
Default Value
Setting Details
Super Resolution
2
When you have set "1080p -> 4K Upscaling" to
"Auto", you can select the degree of video signal
correction from "Off" and between "1" (weak) and
"3" (strong).
Zone 2 HDMI
Not Use
Make the setting when you output to the Zone 2 TV
connected to the HDMI OUT ZONE 2/SUB jack.
"Use": Enable this function
"Not Use": Disable this function
OSD Language
English
Select the on-screen display language from the
following.
(North American models) English, German, French,
Spanish, Italian, Dutch, Swedish
(European, Australian and Asian models) English,
German, French, Spanish, Italian, Dutch, Swedish,
Russian, Chinese
Impose OSD
On
Set whether or not to display information such as
volume adjustment or switching of input on the TV
screen.
"On": OSD is displayed on the TV.
"Off": OSD is not displayed on the TV.
• OSD may not be displayed depending on the
input signal even if "On" is selected. In this case,
change the resolution of the connected device.
Screen Saver
3 minutes
Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes",
"10 minutes" and "Off".
When using a TV that supports 4K, video signals
input at 1080p can be automatically upscaled to 4K
for output.
"Off": When this function is not to be used
"Auto": When this function is to be used
• Select "Off" if your TV does not support 4K.
118
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ HDMI Input
„„ Video Input
Change input assignment between the input selectors and HDMI IN jacks.
Change input assignment between the input selectors and COMPONENT VIDEO
IN jacks and the VIDEO IN jacks. If you do not assign a jack, select "---".
Setting Item
Default Value
Setting Details
BD/DVD
HDMI 1
(HDCP 2.2)
"HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)":
Assign a desired HDMI IN jack to the BD/DVD input
selector. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" first.
Setting Item
Default Value
Setting Details
BD/DVD
COMPONENT
"COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the BD/DVD input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the BD/DVD input selector.
CBL/SAT
HDMI 2
(HDCP 2.2)
"HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)":
Assign a desired HDMI IN jack to the CBL/SAT
input selector. If you do not assign a jack, select
"---". To select an HDMI IN jack already assigned
to another input selector, change its setting to "---"
first.
CBL/SAT
VIDEO 1
"COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the CBL/SAT input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the CBL/SAT input selector.
GAME
---
"COMPONENT": Assign the COMPONENT VIDEO
IN jacks to the GAME input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the GAME input selector.
STRM BOX
VIDEO 2
"COMPONENT ": Assign the COMPONENT VIDEO
IN jacks to the STRM BOX input selector.
"VIDEO 1", "VIDEO 2": Assign a desired VIDEO IN
jack to the STRM BOX input selector.
GAME
STRM BOX
HDMI 3
(HDCP 2.2)
HDMI 4
(HDCP 2.2)
"HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)":
Assign a desired HDMI IN jack to the GAME input
selector. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" first.
"HDMI 1 (HDCP 2.2)" to "HDMI 4 (HDCP 2.2)":
Assign a desired HDMI IN jack to the STRM BOX
input selector. If you do not assign a jack, select
"---". To select an HDMI IN jack already assigned
to another input selector, change its setting to "---"
first.
119
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Digital Audio Input
„„ Analog Audio Input
Change input assignment between the input selectors and DIGITAL IN COAXIAL/
OPTICAL jacks. If you do not assign a jack, select "---".
Change input assignment between the input selectors and AUDIO IN jacks. If you
do not assign a jack, select "---".
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
BD/DVD
OPTICAL 1
"COAXIAL", "OPTICAL 1", "OPTICAL 2" : Assign
a desired DIGITAL IN jack to the BD/DVD input
selector.
BD/DVD
AUDIO 1
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the BD/DVD input selector.
CBL/SAT
---
"COAXIAL", "OPTICAL 1", "OPTICAL 2" : Assign
a desired DIGITAL IN jack to the CBL/SAT input
selector.
CBL/SAT
AUDIO 2
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the CBL/SAT input selector.
GAME
---
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the GAME input selector.
STRM BOX
AUDIO 3
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the STRM BOX input selector.
CD
AUDIO 4
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the CD input selector.
TV
---
"AUDIO 1" to "AUDIO 4": Assign a desired AUDIO
IN jack to the TV input selector.
GAME
---
"COAXIAL", "OPTICAL 1", "OPTICAL 2" : Assign
a desired DIGITAL IN jack to the GAME input
selector.
STRM BOX
---
"COAXIAL", "OPTICAL 1", "OPTICAL 2" : Assign
a desired DIGITAL IN jack to the STRM BOX input
selector.
CD
COAXIAL
"COAXIAL", "OPTICAL 1", "OPTICAL 2" : Assign a
desired DIGITAL IN jack to the CD input selector.
TV
OPTICAL 2
"COAXIAL", "OPTICAL 1", "OPTICAL 2" : Assign a
desired DIGITAL IN jack to the TV input selector.
• Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz,
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.
120
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Input Skip
You can skip inputs to which nothing is connected when selecting them with the
INPUT SELECTOR dial on the main unit or with the / input selectors on the
remote controller.
Setting Item
Default Value
Setting Details
BD/DVD
Use
Set whether to skip the BD/DVD input selector.
Select "Skip" to skip this input.
CBL/SAT
Use
Set whether to skip the CBL/SAT input selector.
Select "Skip" to skip this input.
GAME
Use
Set whether to skip the GAME input selector.
Select "Skip" to skip this input.
STRM BOX
Use
Set whether to skip the STRM BOX input selector.
Select "Skip" to skip this input.
HDMI 5
Use
Set whether to skip the HDMI 5 input selector.
Select "Skip" to skip this input.
HDMI 6
Use
Set whether to skip the HDMI 6 input selector.
Select "Skip" to skip this input.
AUX
Use
Set whether to skip the AUX input selector. Select
"Skip" to skip this input.
CD
Use
Set whether to skip the CD input selector. Select
"Skip" to skip this input.
TV
Use
Set whether to skip the TV input selector. Select
"Skip" to skip this input.
PHONO
Use
Set whether to skip the PHONO input selector.
Select "Skip" to skip this input.
TUNER
Use
Set whether to skip the TUNER input selector.
Select "Skip" to skip this input.
NET
Use
Set whether to skip the NET input selector. Select
"Skip" to skip this input.
USB FRONT
Use
Set whether to skip the USB FRONT input selector.
Select "Skip" to skip this input.
USB REAR
Use
Set whether to skip the USB REAR input selector.
Select "Skip" to skip this input.
121
Setting Item
Default Value
Setting Details
BLUETOOTH
Use
Set whether to skip the BLUETOOTH input
selector. Select "Skip" to skip this input.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Speaker
„„ Configuration
Change the settings of connection environment of the speakers.
Setting Item
Default Value
Setting Details
Speaker
Channels
7.1.2 ch
Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch",
"7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2 ch",
"6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4 ch",
"6.1.4 ch" or "7.1.4 ch" to suit the number of
speaker channels connected.
Subwoofer
Yes
Set whether a subwoofer is connected or not.
"Yes": When a subwoofer is connected
"No": When a subwoofer is not connected
Height 1 Speaker
Top Middle
Set the speaker type if height speakers are
connected to the HEIGHT 1 terminals. Select "Front
High", "Top Front", "Top Middle", "Top Rear", "Rear
High", "Dolby Speaker (Front)", "Dolby Speaker
(Surr)", or "Dolby Speaker (Back)" according to the
type and layout of the connected speakers.
• This setting cannot be selected under any of
following conditions. Set the height speakers
type to "Height 2 Speaker".
–– "Bi-Amp" is set to "Yes"
–– When "Speaker Channels" is set to "2.1.2 ch",
"3.1.2 ch", "4.1.2 ch" or "5.1.2 ch", and "Zone
Speaker" is set to "Zone 2"
• When two sets of height speakers are being used,
"Top Rear", "Rear High", "Dolby Speaker (Surr)",
and "Dolby Speaker (Back)" cannot be selected.
• "Dolby Speaker (Surr)" and "Dolby Speaker
(Back)" can only be selected when surround
speakers or surround back speakers are being
used, respectively. You can check speakers that
you are using on the figure displayed in "Speaker
Channels".
• If an item cannot be selected even though
connection is correct, check that the settings
in "Speaker Channels" matches the number of
connected channels.
122
Setting Item
Default Value
Setting Details
Height 2 Speaker
Rear High
Set the speaker type if height speakers are
connected to the HEIGHT 2 terminals. Select
"Front High", "Top Front", "Top Middle", "Top
Rear", "Rear High", "Dolby Speaker (Front)",
"Dolby Speaker (Surr)" or "Dolby Speaker (Back)"
according to the type and layout of the connected
speakers. However, the options selectable for the
"Height 1 Speaker" the are as follows.
If "Height 1 Speaker" is set to "Front High": Select
from "Top Middle", "Top Rear", "Rear High", "Dolby
Speaker (Surr)" or "Dolby Speaker (Back)".
If "Height 1 Speaker" is set to "Top Front" or "Dolby
Speaker (Front)": Select from "Top Rear", "Rear
High", "Dolby Speaker (Surr)" or "Dolby Speaker
(Back)".
If "Height 1 Speaker" is set to "Top Middle": Fixed
to "Rear High".
• "Dolby Speaker (Surr)" and "Dolby Speaker
(Back)" can only be selected when surround
speakers or surround back speakers are being
used, respectively. You can check speakers that
you are using on the figure displayed in "Speaker
Channels".
• If an item cannot be selected even though
connection is correct, check that the settings
in "Speaker Channels" matches the number of
connected channels.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Zone Speaker
No
Set whether speakers are connected to Zone 2 or
Zone 3 speaker terminals.
"Zone 2": When speakers are connected to Zone 2
speaker terminals
"Zone 2/Zone 3": When connecting speaker to both
ZONE 2 speaker terminal and ZONE 3 speaker
terminals.
• This setting cannot be selected under any of
following conditions.
–– When the surround back speakers are used
–– When 2 sets of height speakers are used
"No": When speakers are not connected to Zone 2
speaker terminals
Bi-Amp
Speaker
Impedance
No
6ohms
„„ Crossover
Change the settings of crossover frequencies.
Set whether the front speakers are bi-amp
connected.
"No": When front speakers are not bi-amp
connected
"Yes": When front speakers are bi-amp connected
• This setting will be set to "No" in either of
following cases.
–– When 2 sets of height speakers are used
–– When surround back speakers and height
speakers are being used at the same time.
–– When "Zone Speaker" is set to "Zone 2" or
"Zone 2/Zone 3"
Set the impedance (Ω) of the connected speakers.
"4ohms": When any of the connected speakers
have 4 Ω or more to less than 6 Ω impedance
"6ohms": When the connected speakers all have
6 Ω or more impedance
• For impedance, check the indications on the
back of the speakers or their instruction manual.
123
Setting Item
Default Value
Setting Details
Front
Small
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
• If "Configuration" - "Subwoofer" is set to "No",
"Front" will be fixed to "Large" and the low
pitched range of the other channels will be output
from the front speakers. Refer to the instruction
manual of your speakers to make the setting.
Center
Small
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
• When "Front" is set to "Small", this is set to
"Small".
• If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
Height 1
Small
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
• When "Front" is set to "Small", this is set to
"Small".
• If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
Height 2
Small
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
• When "Front" is set to "Small", this is set to
"Small".
• If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
Crossover
80Hz
When there are speakers that have been set to
"Small", set the Hz under which you would like
other speakers to play bass, and also set Hz under
which you would like the LFE (low frequency effect)
to play the bass.
The value from "50Hz" to "200Hz" can be set.
Double Bass
Off
This can be selected only when "Configuration"
- "Subwoofer" is set to "Yes" and "Front" is set to
"Large".
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted
"Off": Bass output will not be boosted
• The setting will not automatically be configured
even if you performed Full Auto MCACC.
Surround
Surround Back
Small
Small
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
• When "Front" is set to "Small", this is set to
"Small".
• If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
„„ Distance
Set the distance from each speaker to the listening position.
Set the low range capabilities for each channel by
setting either small or large.
"Small": For small speakers whose low range
capabilities may be limited
"Large": For full-range speakers with sufficient low
range capabilities
• When "Surround" is set to "Small", this is set to
"Small".
• If an item cannot be selected even though
connection is correct, check that the settings in
"Configuration" - "Speaker Channels" matches
the number of connected channels.
124
Setting Item
Default Value
Setting Details
Front Left
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
Center
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
Front Right
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
Height 1 Left
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 1 Right
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Height 2 Left
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
„„ Channel Level
Adjust the volume level of each speaker.
Setting Item
Default Value
Setting Details
Front Left
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Center
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Height 2 Right
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Right
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
Surr Back Right
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Front Right
0.0 dB
Specify the distance between each speaker and
the listening position.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Height 1 Left
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 1 Right
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Left
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surr Back Left
10.0 ft/3.00 m
Surround Left
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
Subwoofer
10.0 ft/3.00 m
Specify the distance between each speaker and
the listening position.
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the remote
controller. When using the unit "feet", the setting is available in increments of 0.1 ft from
0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of
0.03 m from 0.03 m to 9.00 m.
125
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Height 2 Right
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Right
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Surr Back Right
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surr Back Left
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Left
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
Subwoofer
0.0 dB
Select a value between "-15.0 dB" and "+12.0 dB"
(in 0.5 dB increments). A test tone will be output
each time you change the value. Select the desired
level.
„„ Dolby Enabled Speaker
Change the settings of Dolby Enabled Speakers.
Setting Item
Default Value
Setting Details
Dolby Enabled
6.0 ft/1.80 m
Speaker to Ceiling
Set the distance between the Dolby Enabled
Speaker and the ceiling. Select between
"0.1 ft/0.03 m" and "15.0 ft/4.50 m" (0.1 ft/0.03 m
units).
• The unit of distance (ft/m) is displayed using the
unit selected for the "Distance" setting.
Reflex Optimizer
You can enhance the reflection effect of Dolby
Enabled Speakers from the ceiling.
"Off": When this function is not used
"On": When this function is used
• The function is not effective if the listening mode
is Pure Direct.
Off
• This setting can be selected when "Configuration" - "Height 1 Speaker"/"Height 2
Speaker" is set to "Dolby Speaker".
126
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Audio Adjust
„„ Dolby
Change the setting of when Dolby signals are input.
„„ Dual Mono / Mono
Change the settings of multiplex audio playback.
Setting Item
Default Value
Setting Details
Dual Mono
Main
Set the audio channel or language to be output
when playing multiplex audio or multilingual
broadcasts, etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels are output at
the same time.
• For multiplex audio broadcasts, pressing the
button on the remote controller will display "1+1"
on the main unit’s display.
Mono Input
Channel
Left + Right
Setting Item
Default Value
Setting Details
Loudness
Management
On
When playing Dolby TrueHD, enable the dialog
normalization function which keeps the volume of
dialog at a certain level. Note that when this setting
is Off, the DRC function that allows you to enjoy
surround at low volumes is fixed to off when playing
Dolby Digital Plus/Dolby TrueHD.
"On": When this function is used
"Off": When this function is not used
„„ Volume
Change the Volume settings.
Set the input channel to play 2-ch digital sources
such as Dolby Digital, or 2-ch analog/PCM sources
in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left + Right": Left and right channels
127
Setting Item
Default Value
Setting Details
Mute Level
-∞dB
Set the volume lowered from the listening volume
when muting is on. Select a value from "-∞dB",
"-40dB" and "-20dB".
Volume Limit
Off
Set the maximum value to prevent the volume
from becoming too loud. Select a value from "Off",
"-32 dB" to "+17 dB".
Power On Level
Last
Set the volume level of when the power is turned
on. Select a value from "Last" (Volume level before
entering standby mode), "-∞ dB", and "-81.5 dB" to
"+18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Headphone Level
0.0 dB
Adjust the output level of headphones. Select a
value between "-12.0 dB" and "+12.0 dB".
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Source
• This cannot be set if the "NET" "USB" or "BLUETOOTH" input is selected.
„„ Input Volume Absorber
Adjust the volume level when there are differences in volume level among
multiple devices connected to this unit. Select the input selector to make the
setting.
Setting Item
Default Value
Setting Details
Input Volume
Absorber
0.0 dB
Select a value between "-12.0 dB" and "+12.0 dB".
Set a negative value if the volume of the target
device is larger than the others and a positive
value if smaller. To check the audio, play back the
connected device.
• This function does not work in Zone 2/Zone 3.
„„ Audio Select
Select the priority for input selection when multiple audio sources are connected
to one input selector, for example, connections to both the "BD/DVD" HDMI IN
jack and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each
input selector. Select the input selector to make the setting. Note that some of
the default values cannot be changed.
„„ Name Edit
Set an easy name for each input. The set name appears on the main unit’s
display. Select the input selector to make the setting.
Setting Item
Default Value
Setting Details
Name Edit
Input name
1. Select a character or symbol with the cursors,
and press ENTER.
Repeat this operation to input up to 10
characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the
cursor.
" ": Enters a space.
• Pressing CLEAR on the remote controller will
remove all the input characters.
2. After inputting, select "OK" with the cursors, and
press ENTER.
The input name will be saved.
Setting Item
Default Value
Setting Details
Audio Select
BD/DVD:
HDMI
CBL/SAT:
HDMI
GAME:
HDMI
STRM BOX:
HDMI
AUX:
HDMI
CD:
COAXIAL
TV:
OPTICAL
"ARC": When giving priority to the input signal from
ARC-compatible TV.
• This item can be selected only when "Hardware"
- "HDMI" - "Audio Return Channel" is set to
"Auto" and also the "TV" input is selected.
"HDMI": When giving priority to the input signal
from HDMI IN jacks
• This item can be selected only when the input to
be set is assigned to the HDMI jack in the "Input/
Output Assign" - "HDMI Input" setting.
"COAXIAL": When giving priority to the input signal
from DIGITAL IN COAXIAL jacks
• This item can be selected only when the input
to be set is assigned to the COAXIAL jack in
the "Input/Output Assign" - "Digital Audio Input"
setting.
"OPTICAL": When giving priority to the input signal
from DIGITAL IN OPTICAL jacks
• This item can be selected only when the input
to be set is assigned to the OPTICAL jack in
the "Input/Output Assign" - "Digital Audio Input"
setting.
"Analog": To always output analog audio regardless
of input signal
• This item can be selected only when the input
to be set is assigned to the AUDIO IN jack in
the "Input/Output Assign" - "Analog Audio Input"
setting.
• To name a preset radio station, press TUNER on the remote controller, select AM/FM,
and select the preset number.
128
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Fixed PCM
Off
Select whether to fix input signals to PCM (except
multi-channel PCM) when you select "HDMI",
"COAXIAL", or "OPTICAL" in the "Audio Select"
setting. Set this item to "On" if noise is produced or
truncation occurs at the beginning of a track when
playing PCM sources. Select "Off" normally.
• Each time the "Audio Select" setting is changed,
the setting is restored to "Off".
Hardware
„„ HDMI
Change the settings of the HDMI function.
• The setting cannot be changed when "TUNER", "NET", "USB", or "BLUETOOTH" input is
selected.
129
Setting Item
Default Value
Setting Details
HDMI CEC
Off
Setting this to "On" enables the input selection link
and other link functions with HDMI-connected CECcompatible device.
"On": When this function is used
"Off": When this function is not used
When this setting is changed, turn off and then on
again the power of all connected devices.
• Depending on the TV to use, a link setting may
be required on the TV.
• This function is effective only when the device is
connected to the HDMI OUT MAIN terminal.
• Setting this to "On" and closing the operation
screen will display the name of the connected
CEC-compatible device and "CEC On" on the
main unit’s display.
• When this is set to "On", the power consumption
in standby mode may increase. (Depending
on the TV status, the unit will enter the normal
standby mode.)
• If you operate the MASTER VOLUME dial on the
main unit when this setting is "On" and audio is
output from the TV speakers, audio will be output
also from the speakers connected to this unit. To
output audio from only either of them, change the
setting of this unit or TV, or reduce the volume of
this unit.
• If abnormal behavior is observed when this is set
to "On", set it to "Off".
• If a connected device is not CEC-compatible, or
if you are not sure whether it is compatible, set
it to "Off".
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
HDMI Standby
Through
Off
When this is set to anything other than "Off",
you can play the video and audio of an HDMIconnected player on the TV even if the unit is in
standby mode. Also, only "Auto" and "Auto(Eco)"
can be selected if "HDMI CEC" is set to "On". If you
select anything else, set "HDMI CEC" to "Off".
• The power consumption in standby mode will
increase if it is set to anything other than "Off".
"BD/DVD", "CBL/SAT", "GAME", "STRM BOX",
"HDMI 5", "HDMI 6", "AUX": For example, if
you select "BD/DVD", you can play the device
connected to the "BD/DVD" jack on the TV even
if the unit is in standby mode. Select this setting
if you have decided which player to use with this
function.
"Last": You can play on the TV the video and audio
of the input selected immediately before the unit is
switched to standby.
"Auto", "Auto (Eco)": Select either of the settings
if the connected player conforms to the CEC
standard. You can play the video and audio of
the player on the TV using the CEC link function,
irrespective of what input is selected immediately
before the unit is switched to standby.
• To play a non-CEC compliant player on the TV,
turn the unit on and switch the input.
• When using a CEC-compliant TV, you can
reduce the power consumption in standby mode
by selecting "Auto (Eco)".
Audio TV Out
Off
You can enjoy audio through the speakers of the
TV while this unit is on.
"On": When this function is used
"Off": When this function is not used
• This setting is fixed to "Auto" if you have set
"Input/Output Assign" - "TV Out/OSD" - "HDMI
Out" or "Other" - "HDMI Out" in "AV Adjust" to
"MAIN" or "MAIN+SUB" and "HDMI CEC" is set
to "On". If you change this setting, set "HDMI
CEC" to "Off".
• Listening mode cannot be changed while "Audio
TV Out" is set to "On" and audio is being output
from the TV.
• Depending on your TV or input signal of the
connected device, audio may not be output from
the TV even if this is set to "On". In such a case,
audio is output from the speakers of the unit.
• Audio is output from this unit if you operate the
MASTER VOLUME dial on this unit when audio
that is input to this unit is output from your TV
speakers. If you do not want to output audio,
change the setting of this unit or TV, or reduce
the volume of this unit.
Audio Return
Channel
Auto (*)
You can enjoy the sound of the HDMI-connected
ARC-compatible TV through the speakers
connected to the unit.
*To use this function, set "HDMI CEC" to "On"
beforehand.
"Auto": When enjoying the TV sound through the
speakers of this unit
"Off": When not using the ARC function
Auto Delay
On
This setting automatically corrects
desynchronization between the video and audio
signals based on the information from the HDMI Lip
Sync-compatible TV.
"On": When enabling the automatic correction
function
"Off": When not using the automatic correction
function
130
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Power Management
Change the settings for the power-save function.
Setting Item
Default Value
Setting Details
Sleep Timer
Off
You can allow the unit to enter standby
automatically when the specified time elapses.
Select a value from "30 minutes", "60 minutes" and
"90 minutes".
"Off": The unit does not automatically enter standby
mode.
Auto Standby
On/Off
This setting allows the unit to enter standby mode
automatically after 20 minutes of inactivity without
any video or audio input. (When "USB Power Out
at Standby" or "Network Standby" is enabled, the
unit enters the HYBRID STANDBY mode which
minimizes the increase in power consumption.)
"On": The unit automatically enters standby mode
("AUTO STBY" lights up).
"Off": The unit does not automatically enter standby
mode.
• "Auto Standby" is displayed on the main unit’s
display and TV screen 30 seconds before
entering standby mode.
• "Auto Standby" does not work when Zone 2/
Zone 3 is active.
• Default values vary depending on the regions.
Auto Standby in
HDMI Standby
Through
Off
Enable or disable "Auto Standby" while "HDMI
Standby Through" is on.
"On": The setting is enabled.
"Off": The setting is disabled.
• This setting cannot be set to "On" if "Auto
Standby" and "HDMI Standby Through" are set
to "Off".
Setting Item
Default Value
Setting Details
USB Power Out
at Standby
Off
When this function is set to "On", electricity can be
supplied to the device connected to the USB port
even if this unit is in standby mode .
• While using this function, power consumption
increases in standby mode, however, the
increase in power consumption is minimized by
automatically entering the HYBRID STANDBY
mode where only the essential circuits are
operating.
Network Standby
On
When this feature is turned "On", you can turn
on the power of the unit via the network using an
application such as Pioneer Remote App that can
control this unit.
• When "Network Standby" is used, power
consumption increases in standby mode,
however, the increase in power consumption is
minimized by automatically entering the HYBRID
STANDBY mode where only the essential circuits
are operating.
• When connection to the network is lost, "Network
Standby" may be disabled to reduce power
consumption. In such a case, turn the unit on by
using the power button on the remote controller
or main unit.
Bluetooth Wakeup Off
This function wakes up the unit on standby by
connecting a BLUETOOTH-enabled device.
"On": When this function is used
"Off": When this function is not used
• When this is set to "On", power consumption
increases in standby mode, however, the
increase in power consumption is minimized by
automatically entering the HYBRID STANDBY
mode where only the essential circuits are
operating.
• This setting is fixed to "Off" if "Network/
Bluetooth" - "Bluetooth" - "Auto Input Change" is
set to "Off".
• Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can
be selected when the network function is activated.
131
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ 12V Trigger A
Set when outputting the control signal (maximum 12 V/100 mA) through the 12V
TRIGGER OUT A jack. Different settings can be set for each input selector. You
can enable power link operation when you connect the unit and the external
devices equipped with 12V trigger input jack.
Setting Item
Default Value
Setting Details
BD/DVD
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as input
source for the main room.
"Zone 2": Output when "BD/DVD" is selected as
input source for ZONE2.
"Zone 3": Output when "BD/DVD" is selected as
input source for ZONE3.
CBL/SAT
GAME
STRM BOX
Off
Off
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CBL/SAT" is selected as
input source for the main room.
"Zone 2": Output when "CBL/SAT" is selected as
input source for ZONE2.
"Zone 3": Output when "CBL/SAT" is selected as
input source for ZONE3.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "GAME" is selected as input
source for the main room.
"Zone 2": Output when "GAME" is selected as input
source for ZONE2.
"Zone 3": Output when "GAME" is selected as input
source for ZONE3.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "STRM BOX" is selected as
input source for the main room.
"Zone 2": Output when "STRM BOX" is selected as
input source for ZONE2.
"Zone 3": Output when "STRM BOX" is selected as
input source for ZONE3.
132
Setting Item
Default Value
Setting Details
HDMI 5
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 5" is selected as input
source for the main room.
HDMI 6
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 6" is selected as input
source for the main room.
AUX
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "AUX" is selected as input
source for the main room.
CD
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CD" is selected as input
source for the main room.
"Zone 2": Output when "CD" is selected as input
source for ZONE2.
"Zone 3": Output when "CD" is selected as input
source for ZONE3.
TV
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TV" is selected as input
source for the main room.
"Zone 2": Output when "TV" is selected as input
source for ZONE2.
"Zone 3": Output when "TV" is selected as input
source for ZONE3.
PHONO
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PHONO" is selected as input
source for the main room.
"Zone 2": Output when "PHONO" is selected as
input source for ZONE2.
"Zone 3": Output when "PHONO" is selected as
input source for ZONE3.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
TUNER
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TUNER" is selected as input
source for the main room.
"Zone 2": Output when "TUNER" is selected as
input source for ZONE2.
"Zone 3": Output when "TUNER" is selected as
input source for ZONE3.
BLUETOOTH
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BLUETOOTH" is selected as
input source for the main room.
"Zone 2": Output when "BLUETOOTH" is selected
as input source for ZONE2.
"Zone 3": Output when "BLUETOOTH" is selected
as input source for ZONE3.
NET
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "NET" is selected as input
source for the main room.
"Zone 2": Output when "NET" is selected as input
source for ZONE2.
"Zone 3": Output when "NET" is selected as input
source for ZONE3.
USB FRONT
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "USB FRONT" is selected as
input source for the main room.
"Zone 2": Output when "USB FRONT" is selected
as input source for ZONE2.
"Zone 3": Output when "USB FRONT" is selected
as input source for ZONE3.
USB REAR
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "USB REAR" is selected as
input source for the main room.
"Zone 2": Output when "USB REAR" is selected as
input source for ZONE2.
"Zone 3": Output when "USB REAR" is selected as
input source for ZONE3.
„„ 12V Trigger B
Set when outputting the control signal (maximum 12 V/25 mA) through the 12V
TRIGGER OUT B jack. Different settings can be set for each input selector. You
can enable power link operation when you connect the unit and the external
devices equipped with 12V trigger input jack.
133
Setting Item
Default Value
Setting Details
BD/DVD
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BD/DVD" is selected as input
source for the main room.
"Zone 2": Output when "BD/DVD" is selected as
input source for ZONE2.
"Zone 3": Output when "BD/DVD" is selected as
input source for ZONE3.
CBL/SAT
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CBL/SAT" is selected as
input source for the main room.
"Zone 2": Output when "CBL/SAT" is selected as
input source for ZONE2.
"Zone 3": Output when "CBL/SAT" is selected as
input source for ZONE3.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
GAME
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "GAME" is selected as input
source for the main room.
"Zone 2": Output when "GAME" is selected as input
source for ZONE2.
"Zone 3": Output when "GAME" is selected as input
source for ZONE3.
TV
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TV" is selected as input
source for the main room.
"Zone 2": Output when "TV" is selected as input
source for ZONE2.
"Zone 3": Output when "TV" is selected as input
source for ZONE3.
STRM BOX
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "STRM BOX" is selected as
input source for the main room.
"Zone 2": Output when "STRM BOX" is selected as
input source for ZONE2.
"Zone 3": Output when "STRM BOX" is selected as
input source for ZONE3.
PHONO
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "PHONO" is selected as input
source for the main room.
"Zone 2": Output when "PHONO" is selected as
input source for ZONE2.
"Zone 3": Output when "PHONO" is selected as
input source for ZONE3.
HDMI 5
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 5" is selected as input
source for the main room.
TUNER
Off
HDMI 6
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "HDMI 6" is selected as input
source for the main room.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "TUNER" is selected as input
source for the main room.
"Zone 2": Output when "TUNER" is selected as
input source for ZONE2.
"Zone 3": Output when "TUNER" is selected as
input source for ZONE3.
AUX
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "AUX" is selected as input
source for the main room.
NET
Off
CD
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "CD" is selected as input
source for the main room.
"Zone 2": Output when "CD" is selected as input
source for ZONE2.
"Zone 3": Output when "CD" is selected as input
source for ZONE3.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "NET" is selected as input
source for the main room.
"Zone 2": Output when "NET" is selected as input
source for ZONE2.
"Zone 3": Output when "NET" is selected as input
source for ZONE3.
134
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
USB FRONT
Off
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "USB FRONT" is selected as
input source for the main room.
"Zone 2": Output when "USB FRONT" is selected
as input source for ZONE2.
"Zone 3": Output when "USB FRONT" is selected
as input source for ZONE3.
USB REAR
BLUETOOTH
Off
Off
Multi Zone
„„ Zone 2
Change the settings for Zone 2.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "USB REAR" is selected as
input source for the main room.
"Zone 2": Output when "USB REAR" is selected as
input source for ZONE2.
"Zone 3": Output when "USB REAR" is selected as
input source for ZONE3.
Set the 12V trigger output setting to each input.
"Off": No output
"Main": Output when "BLUETOOTH" is selected as
input source for the main room.
"Zone 2": Output when "BLUETOOTH" is selected
as input source for ZONE2.
"Zone 3": Output when "BLUETOOTH" is selected
as input source for ZONE3.
135
Setting Item
Default Value
Setting Details
Output Level
Fixed
Select whether to adjust the volume on the premain amplifier in the separate room or on this
unitwhen outputting to Zone 2.
"Fixed": Adjust on the pre-main amplifier in
theseparate room
"Variable": Adjust on this unit
Volume Limit
Off
Set the maximum value for Zone 2 to avoid too
high volume. Select "Off" or a value between
"-32 dB" and "+17 dB".
Power On Level
Last
Set the Zone 2 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "-∞ dB", and
"-81.5 dB" to "+18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Bass
0 dB
Adjust the volume of the bass for Zone 2. Select a
value between "-10 dB" and "+10 dB".
Treble
0 dB
Adjust the volume of the treble for Zone 2. Select a
value between "-10 dB" and "+10 dB".
Balance
0
Set the left-right balance for Zone 2. Select a value
between "L + 10" to "R + 10".
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Zone 3
„„ Remote Play Zone
Change the settings for Zone 3.
Change the settings for remote play.
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
Output Level
Fixed
Select whether to adjust the volume on the premain amplifier in the separate room or on this
unitwhen outputting to Zone 3.
"Fixed": Adjust on the pre-main amplifier
intheseparate room
"Variable": Adjust on this unit
• When "Speaker" - "Configuration" - "Zone
Speaker" is set to "Zone 2/Zone 3", this setting is
fixed to "Variable".
Remote Play
Zone
Auto
Volume Limit
Off
Set the maximum value for Zone 3 to avoid too
high volume. Select "Off" or a value between
"-32 dB" and "+17 dB".
Power On Level
Last
Set the Zone 3 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "-∞ dB", and
"-81.5 dB" to "+18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
When playing with AirPlay or Spotify Connect,
or when using the Music Server function to play
remotely from your PC, you can set whether to play
in the main room (where this unit is located) or in a
separate room (ZONE 2/ZONE 3).
"Auto": When the main room input is NET, music
is played in the main room. When the separate
room input is NET and the main room input is other
than NET, then the music is played in the separate
room.
"Main", "Zone 2", "Zone 3": Select when limiting the
play zone to a particular room. For example, when
playing only in the separate room, select "Zone 2"
or "Zone 3".
• This function may not work if playback is already
proceeding with the same network function.
136
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Miscellaneous
„„ Firmware Update
Change the settings for Firmware Update.
„„ Tuner
Change the frequency step for the tuner.
Setting Item
Default Value
Setting Details
AM/FM
Frequency Step
(North American
models)
10 kHz/0.2 MHz
Select a frequency step to suit your residential
area.
Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz".
• When this setting is changed, all radio presets
are deleted.
AM Frequency
Step (European,
Australian and
Asian models)
9 kHz
Select a frequency step to suit your residential
area.
Select "10 kHz" or "9 kHz".
• When this setting is changed, all radio presets
are deleted.
Setting Item
Default Value
Setting Details
Update Notice
Enable
Availability of a firmware update is notified via
network.
"Enable": Notify updates
"Disable": Do not notify updates
Version
-
The current firmware version is displayed.
Update via
NET
-
Press ENTER to select when updating the firmware
via network.
• This setting cannot be selected if you do not
have Internet access or there is no updatable
firmware.
Update via
USB
-
Press ENTER to select when updating the firmware
via USB.
• This setting cannot be selected if a USB storage
device is not connected or there is no updatable
firmware in the USB storage device.
„„ Remote ID
Change the remote controller ID.
Setting Item
Default Value
Setting Details
Remote ID
1
Select an ID for the unit's remote controller from
"1", "2", and "3" to prevent interference between
the unit and other Pioneer components that are
installed in the same room. After changing the ID
on the main unit, change the ID on the remote
controller accordingly with the following procedure.
While pressing and holding the MODE button,
press the following buttons for approx. 3 seconds.
• To change the remote controller ID to "1":
(The remote indicator blinks once.)
• To change the remote controller ID to "2":
(The remote indicator blinks twice.)
• To change the remote controller ID to "3":
(The remote indicator blinks three times.)
• Wait for a while if "Firmware Update" cannot be selected. It can be selected when the
network function is activated.
„„ Initial Setup
Make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It can be selected when
the network function is activated.
„„ Lock
Lock the Setup menu so that the settings cannot be changed.
137
Setting Item
Default Value
Setting Details
Setup Parameter
Unlocked
Lock the Setup menu so that the settings cannot be
changed.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
MCACC
Menu operations
Setup the speakers automatically or make desired changes to the equalizer. You
can also check the values set currently for each speaker setting.
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press
on the remote controller to display the Home screen, then select
MCACC with the cursors on the remote controller and press ENTER.
Select the item with the cursor / / / buttons of the remote controller and
press ENTER to confirm your selection.
Use the cursors / to change the default values.
• To return to the previous screen, press .
• To exit the settings, press .
138
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Full Auto MCACC
2. Select the connected speaker configuration.
Place the supplied speaker setup microphone in the listening position, measure
the test tones emitted by the speakers, then the unit automatically sets the
optimum volume level for each speaker, the crossover frequencies, and the
distance from the listening position. This also reduces the effect of the standing
wave in accordance with the viewing environment and automatically adjusts the
equalizers for the speakers and enables correction of distortion caused by the
acoustic environment of the room.
• Calibration takes between 3 and 12 minutes to be completed. The speakers
emit the test tone at high volume during measurement, so be careful of your
surroundings. Keep the room as quiet as possible during measurement.
• If you have connected a subwoofer, check the power and volume of the
subwoofer. Set the subwoofer volume to more than halfway.
• If the power of this unit suddenly turns off, the wires in the speaker cables
may have touch the rear panel or other wires and tripped the protection circuit.
Twist the wires again properly and make sure they do not stick out of the
speaker terminals when connecting.
Height 1 Speaker
Height 2 Speaker
1. Place the supplied speaker setup microphone in the listening position, and
connect to the MCACC SETUP MIC jack on the main unit.
MCACC
SETUP MIC
When putting the speaker setup microphone on a tripod, refer to the illustration
when putting it in place.
The image on the screen changes as you choose the number of channels in
"Speaker Channels", so refer to it when performing the settings.
3. Test tones are emitted by the speakers, and firstly the unit detects the
speakers connected and the noise in the environment.
4. The measurement results in step 3 are displayed. If there is no problem in
the detection result of the speaker, select "Next" and press ENTER to output
the test tone again to automatically set the settings such as volume level,
crossover frequency, etc., to their optimum. (The test tone is automatically
output when 10 seconds has elapsed without any operation.)
• When an error message is displayed or when the connected speakers
cannot be detected, perform re-measurement by selecting "Retry" and
pressing ENTER.
• When it cannot be resolved by performing the re-measurement, confirm
if the speakers are connected correctly. If there is any problem with the
speaker connection, perform the connection after disconnecting the power
cord.
5. Once the measurement is completed, it is possible to perform the
measurement in 2 additional listening positions. To perform the measurement,
select "Next" and press ENTER, then follow the instructions. To not perform
the measurement, select "Finish (Calculate)" and press ENTER.
6. Disconnect the speaker setup microphone.
139
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Manual MCACC
„„ EQ Adjust
Setting Item
Default Value
Setting Details
Height 1 Left
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Height 1 Right
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
If you perform Full Auto MCACC then settings are automatic, but you can also
adjust the output volume of the range of each connected speaker to suit your own
preferences. You can adjust the volume of the different sound ranges for each
of the speakers. You can set three different equalizers in Preset 1 to 3. You can
select up to 4 bands for the Subwoofer and 9 bands for all other speakers.
Setting Item
Default Value
Setting Details
Front Left
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
Center
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Front Right
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
140
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
Height 2 Left
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surround Right
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surr Back Right
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Height 2 Right
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
141
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Surr Back Left
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
Surround Left
Subwoofer
0.0 dB
0.0 dB
After selecting the speaker frequency from between
"63 Hz" and "16 kHz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• "63 Hz" can only be selected when this speaker
is set to "Large" in "System Setup" - "Speaker" "Crossover".
• If an item cannot be selected even though
connection is correct, check that the settings in
"System Setup" - "Speaker" - "Configuration"
- "Speaker Channels" matches the number of
connected channels.
MCACC Data Check
You can check the number of speaker channels connected and the content and
values you have set for each of the speaker settings.
„„ Speaker Setting
You can check the number of speaker channels connected and the large and
small settings you have set for the low range reproduction capabilities for each of
the speakers.
„„ Channel Level
You can check the output level settings for each of the speakers.
„„ Speaker Distance
You can check the distance from each speaker to the listening position.
„„ Acoustic Calibration EQ
You can check the calibration values for the frequency characteristics of each
speaker that were set in "Manual MCACC".
After selecting the speaker frequency from between
"31 Hz" and "250 Hz" with the cursors / , adjust
the volume of that frequency between "-12.0 dB"
and "+12.0 dB" with / .
• This cannot be selected if "No" is set in
"System Setup" - "Speaker" - "Configuration" "Subwoofer".
• The result may not be as expected depending on the input source and listening mode
setting.
• If you want to make the adjustments while listening to something, press
on the remote
controller, and select the Preset you want to adjust in "AV Adjust" - "MCACC" - "Manual
EQ Select" first.
142
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Network/Bluetooth
Menu operations
Make settings related to network connections and BLUETOOTH.
Use the on-screen displays (OSD) that appear on the TV to make the settings.
Press
on the remote controller to display the Home screen, select Network/
Bluetooth with the cursors on the remote controller, then press ENTER.
Select the item with the cursor / / / buttons of the remote controller and
press ENTER to confirm your selection.
Use the cursors / to change the default values.
• To return to the previous screen, press .
• To exit the settings, press .
143
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Network
• When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the
setting automatically. ("Enable" is set by default.) To assign fixed IP addresses
to each components, you must set "DHCP" to "Disable" and assign an address
to this unit in "IP Address" as well as set information related to your LAN, such
as Subnet Mask and Gateway.
Setting Item
Default Value
Setting Details
Wi-Fi
Off(Wired)
Connect the unit to network via wireless LAN
router.
"On": Wireless LAN connection
"Off (Wired)": Wired LAN connection
• When switching between "On" and "Off(Wired)",
stop the Network service. Also, when group
playback is in process, cancel the group
playback once, and then switch the setting.
Wi-Fi Setup
-
You can configure wireless LAN settings by
pressing ENTER when "Start" is displayed.
Wi-Fi Status
-
The information of the connected access point will
be displayed.
"SSID": SSID of the connected access point.
"Signal": Signal strength of the connected access
point.
"Status": Status of the connected access point.
MAC Address
-
This is the MAC address of this unit.
This value is specific to the component and cannot
be changed.
DHCP
Enable
"Enable": Auto configuration by DHCP
"Disable": Manual configuration without DHCP
• If selecting "Disable", you must set "IP Address",
"Subnet Mask", "Gateway", and "DNS Server"
manually.
IP Address
0.0.0.0
Displays/Sets the IP address.
Subnet Mask
0.0.0.0
Displays/Sets the subnet mask.
Gateway
0.0.0.0
Displays/Sets the gateway.
DNS Server
0.0.0.0
Displays/Sets the primary DNS server.
144
Setting Item
Default Value
Setting Details
Proxy URL
-
Displays/Sets the proxy server URL.
Proxy Port
8080
Displays/Sets the proxy server port number when
you enter "Proxy URL".
Friendly Name
Pioneer VSXChange the device name for this unit which is
LX503 XXXXXX shown on other devices connected to the network
to an easily recognized name.
1. P
ress ENTER to display the Edit screen.
2. S
elect a character or symbol with the cursors
and press ENTER.
Repeat it to input 31 or less characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases.)
"←" "→": Moves the cursor to the arrow
direction.
" ": Removes a character on the left of the
cursor.
" ": Enters a space.
• Pressing CLEAR on the remote controller will
remove all the input characters.
3. After inputting, select "OK" with the cursors and
press ENTER.
The input name will be saved.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Setting Item
Default Value
Setting Details
AirPlay Password
-
You can set a password of up to 31 characters so
that only registered users can use AirPlay®.
1. Press ENTER to display the Edit screen.
2. Select a character or symbol with the cursors
and press ENTER.
Repeat it to input 31 or less characters.
"A/a": Switches between upper and lower cases.
(Pressing MODE on the remote controller also
toggles between upper and lower cases.)
"←" "→": Moves the cursor to the arrow
direction.
" ": Removes a character on the left of the
cursor.
" ": Enters a space.
• To select whether to mask the password with
"" or display it in plain text, press +Fav on
the remote controller.
• Pressing CLEAR on the remote controller will
remove all the input characters.
3. After inputting, select "OK" with the cursors and
press ENTER.
The input password will be saved.
Network Check
-
You can check the network connection.
Press ENTER when "Start" is displayed.
Usage Data
No
• Wait for a while if "Network" cannot be selected. It will appear when the network feature
is started.
Bluetooth
As a means of improving the quality of our products
and services, we may collect information about
your usage over the network. Select "Yes" if you
agree to our collecting this information. Select "No"
if you do not want us to collect this information.
• You can set this after confirming the Privacy
Policy. When you select "Usage Data" and press
ENTER, the Privacy Policy is displayed. (The
same screen is displayed once also when setting
up the network connection.) If you agree to the
collection of the information, this setting also
becomes "Yes". Note that if you agree to the
Privacy Policy but select "No" for this setting, the
information will not be collected.
145
Setting Item
Default Value
Setting Details
Bluetooth
On
Select whether or not to use the BLUETOOTH
function.
"On": Enables connection with a BLUETOOTH
wireless technology enabled device by using the
BLUETOOTH function. Select "On" also when
making various BLUETOOTH settings.
"Off": When not using the BLUETOOTH function
Auto Input
Change
On
The input of the unit will automatically be switched
to "BLUETOOTH" when connection is made from a
BLUETOOTH wireless technology enabled device
to the unit.
"On": The input will automatically become
"BLUETOOTH" when a BLUETOOTH wireless
technology enabled device is connected.
"Off": The function is disabled.
• If the input is not switched automatically, set to
"Off" and change the input manually.
Auto Reconnect
On
This function automatically reconnects to the
BLUETOOTH wireless technology enabled device
connected last when you change the input to
"BLUETOOTH".
"On": When this function is to be used
"Off": When this function is not to be used
• This may not work with some BLUETOOTH
wireless technology enabled devices.
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Setting Item
Default Value
Setting Details
Pairing
Information
-
You can initialize the pairing information saved on
this unit.
Pressing ENTER when "Clear" is displayed
initializes the pairing information stored in this unit.
• This function does not initialize the pairing
information on the BLUETOOTH wireless
technology enabled device. When pairing the
unit again with the device, be sure to clear
the pairing information on the BLUETOOTH
wireless technology enabled device in advance.
For information on how to clear the pairing
information, refer to the BLUETOOTH wireless
technology enabled device's instruction manual.
Device
-
Displays the name of the BLUETOOTH wireless
technology enabled device connected to the unit.
• The name is not displayed when "Status" is
"Ready" and "Pairing".
Status
-
Displays the status of the BLUETOOTH wireless
technology enabled device connected to the unit.
"Ready": Not paired
"Pairing": Paired
"Connected": Successfully connected
• Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH
function is started up.
146
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
AV Adjust
Menu operations
You can quickly adjust the settings you frequently use, such as tone adjustments,
etc.
You can make the settings on the TV screen while playing something. Press
on the remote controller to display the AV Adjust menu. Note that there is no
display on the TV screen when the input selector is "CD", "TV", "PHONO", "FM",
or "AM", so follow the main unit’s display while doing the operations.
AV Adjust
BD/DVD
Tone
Bass
Level
Treble
MCACC
Other
Select the item with the cursor / buttons of the remote controller and press
ENTER to confirm your selection.
Use the cursors to change the settings.
• To return to the previous screen, press .
• To exit the settings, press .
„„ Tone
Bass: Enhance or moderate the bass range of the speaker.
Treble: Enhance or moderate the treble range of the speaker.
• It cannot be set if the listening mode is Direct or Pure Direct.
„„ Level
Center: Adjust the speaker level of the center speaker while listening to the
sound.
Subwoofer: Adjust the speaker level of the subwoofer while listening to the
sound.
• If you set the unit to the standby mode, the adjustments you made will be
147
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
restored to the previous statuses.
„„ MCACC
MCACC EQ: Enable or disable the equalizer function that corrects for distortion
caused by the acoustic environment of the room.
• It cannot be set if the listening mode is Pure Direct.
Manual EQ Select: From the Home screen, select "Preset 1" to "Preset 3" which
were set in "MCACC" - "Manual MCACC" - "EQ Adjust". The same sound field
setting is applied all ranges when set to "Off".
• It cannot be set if the listening mode is Pure Direct.
Standing Wave: Setting this "On" will control the effect of the standing wave
generated by the sound wave reflected by wall or similar interfering with the
original sound wave.
Phase Control: Correct phase disturbance in the low range to enhance the bass.
This enables you to achieve powerful bass reproduction that is faithful to the
original sound.
• It cannot be set if the listening mode is Pure Direct.
DRC: Make small sounds easily heard. It is useful when you need to reduce the
volume while watching a movie late night. You can enjoy the effect only when
playing Dolby series and DTS series input signals.
• It cannot be set if the listening mode is Direct or Pure Direct.
• The setting cannot be used in the following cases.
–– If "Loudness Management" is set to "Off" when playing Dolby Digital Plus or
Dolby TrueHD
–– When the input signal is DTS:X and "Dialog Control" is other than 0 dB
Center Spread: Adjust the width of the sound field of the front channel when
playing in the Dolby Audio - DSur listening mode. To spread the width of the
sound field to the right and left, set to "On". To concentrate the sound in the
center, set to "Off".
• Depending on the speaker settings, "Off" is applied.
Dialog Control: You can increase the volume of dialog portion of the audio up to
6 dB by 1 dB step so that you can hear the dialog easily in noisy atmosphere.
• This cannot be set for content other than DTS:X.
• Depending on the content, this function may not be selected.
Theater Filter: Adjust the soundtrack that was processed to enhance its high
pitch range, in order to make it suitable for home theater.
• It cannot be set if the listening mode is Direct or Pure Direct.
„„ Other
Sound Delay: If the video is behind the audio, you can delay the audio to offset
the gap. Different settings can be set for each input selector.
• It cannot be set if the listening mode is Pure Direct and the input signal is
analog.
Sound Retriever: Improve the quality of the compressed audio. Playback sound
of lossy compressed files such as MP3 will be improved. The setting can be
separately set to each input selector. The setting is effective in the signals of
48 kHz or less. The setting is not effective in the bitstream signals.
• It cannot be set if the listening mode is Direct or Pure Direct.
HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN",
"SUB", and "MAIN+SUB".
148
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Web Setup
Menu operations
You can make the settings for the network function of this unit using an Internet
browser on a PC, smartphone, etc.
Network Connection: You can select a network connection method. If you select
"Wireless", select an access point from "Wi-Fi Setup" to connect.
1. Press
on the remote controller to display the Home screen.
2. Select "Network/Bluetooth" - "Network" with the cursors, then take a note of
the IP address displayed in "IP Address".
3. Start the internet browser on your PC or smartphone and enter the IP address
of the unit in the URL field.
4. Information for the unit (Web Setup screen) is displayed in the internet
browser.
DHCP: You can change DHCP settings. If you select "Off", set "IP Address",
"Subnet Mask", "Gateway" and "DNS Server" manually.
Proxy: Display and set the URL for the proxy server.
5. After changing the settings, select "Save" to save the settings.
Device Information
You can change the Friendly Name, set an AirPlay Password, etc.
Control4: Register this unit if you are using a Control4 system.
Firmware Update: Select the firmware file you have downloaded to your PC so
you can update this unit.
Network Setting
Status: You can see information for the network such as the MAC address and IP
address of this unit.
149
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Firmware Update
Updating Function on This Unit
This unit has a function to update the firmware (system software) via network
or USB port. This function can improve various operations and add various
functions.
• For the latest information on updates, visit our company's website. If there is
no update available, updating the firmware of this unit is not necessary.
• Before updating, make sure that the speaker setup microphone is not
connected.
• While updating the firmware, do not do the following:
–– Disconnecting and reconnecting cables, USB storage device, speaker
setup microphone or headphones, or performing operations on the unit
such as turning the power off
–– Accessing this unit from a PC or smartphone using their applications
• The update may take approx. 20 minutes to complete via network or via USB
port. Existing settings are guaranteed in either updating method.
When this unit is connected to the network, notifications of firmware updates may
be displayed. To update the firmware, select "Update Now" with the cursors on
the remote controller, and press the ENTER button. The unit automatically enters
standby mode after "Completed!" is displayed, and the update is completed.
Disclaimer: The program and accompanying online documentation are furnished
to you for use at your own risk.
Our company will not be liable and you will have no remedy for damages for
any claim of any kind whatsoever concerning your use of the program or the
accompanying online documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will our company be liable to you or any third party for any special,
indirect, incidental, or consequential damages of any kind, including, but not
limited to, compensation, reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other reason whatsoever.
❏❏ Updating the Firmware via Network
( p151)
150
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Updating the Firmware via Network
•
•
•
•
•
Check that the unit is turned on, and the connection to the Internet is secured.
Turn off the controller components (PC etc.) connected to the network.
Stop any playing Internet radio, USB storage device, or server content.
If the multi-zone function is active, turn it off.
If "HDMI CEC" is set to "On", set it to "Off".
–– Press
to display the Home screen. Next, select "System Setup" "Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "Off".
* The descriptions may differ from the actual on-screen displays, however, operations
and functions are the same.
Update
1. Press .
The Home screen is displayed on the TV screen.
• If "Firmware Update" is grayed out and cannot be selected, wait for a while
until it starts up.
• If there is no updatable firmware, "Update via NET" cannot be selected.
3. Press ENTER with "Update" selected, and start update.
• During the update, the TV screen may go black depending on the program
to be updated. In such a case, check the progress on the display of the
unit. The TV screen will remain black until the update is completed and the
power is turned on again.
• When "Completed!" is displayed, the update is complete.
4. Press STANDBY/ON on the main unit to turn the unit into standby mode.
The process is completed, and your firmware is updated to the latest version.
• Do not use on the remote controller.
If an Error Message is Displayed
If an error occurs, "- Error!" is displayed on the display of the unit. (""
represents an alphanumeric character.) Refer to the following descriptions and
check.
2. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via
NET" with the cursors in order, then press ENTER.
Error Code
• -01, -10:
LAN cable not found. Connect the LAN cable properly.
• -02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20,
-21:
Internet connection error. Check the following:
–– Whether the router is turned on
–– Whether this unit and the router are connected via the network
Unplug and plug the power cords of this unit and the router. This may solve
the problem. If you are still unable to connect to the Internet, the DNS server
or proxy server may be temporarily down. Check the server operation status
with your Internet service provider.
151
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
• Others:
After removing the power plug once, insert it to the outlet, and then start the
operation from the beginning.
❏❏ Updating via USB (
152
p153)
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Updating via USB
• Prepare a 128 MB or larger USB storage device. The format of USB storage
devices supports FAT16 or FAT32 file system format.
–– Media inserted into a USB card reader may not be used for this function.
–– USB storage devices equipped with the security function are not supported.
–– USB hubs and USB devices equipped with the hub function are not
supported. Do not connect these devices to the unit.
• Delete any data stored on the USB storage device.
• Turn off control devices (PC etc.) connected to the network.
• Stop an Internet radio, USB storage device, or server content being played.
• If the multi-zone function is active, turn it off.
• If "HDMI CEC" is set to "On", set it to "Off".
–– Press
to display the Home screen. Next, select "System Setup" "Hardware" - "HDMI", press ENTER, select "HDMI CEC" and select "Off".
* Depending on the USB storage device or its content, long time may be required
for loading, the content may not be loaded correctly, or power may not be supplied
correctly.
* Our company will not be liable whatsoever for any loss or damage of data, or storage
failure arising from the use of the USB storage device. Please note this in advance.
* The descriptions may differ from the actual on-screen displays, however, operations
and functions are the same.
Update
1. Connect the USB storage device to your PC.
2. Download the firmware file from our company's website to your PC and unzip.
Firmware files are named as below.
PIOAVR_.zip
Unzip the file on your PC. The number of unzipped files and folders varies
depending on the model.
3. Copy all unzipped files and folders to the root folder of the USB storage device.
• Make sure to copy the unzipped files.
4. Connect the USB storage device to the USB port of this unit.
• If an AC adapter is supplied with the USB storage device, connect the AC
adapter, and use it with a household outlet.
• If the USB storage device has been partitioned, each section will be treated
as an independent device.
5. Press .
The Home screen is displayed on the TV screen.
6. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via
USB" with the cursors in order, then press ENTER.
• If "Firmware Update" is grayed out and cannot be selected, wait for a while
until it starts up.
• If there is no updatable firmware, "Update via USB" cannot be selected.
7. Press ENTER with "Update" selected, and start update.
• During the update, the TV screen may go black depending on the program
to be updated. In such a case, check the progress on the display of the
unit. The TV screen will remain black until the update is completed and the
power is turned on again.
• During the update, do not turn the power off, or disconnect or reconnect the
USB storage device.
• When "Completed!" is displayed, the update is complete.
8. Disconnect the USB storage device from the unit.
9. Press STANDBY/ON on the main unit to turn the unit into standby mode.
The process is completed, and your firmware is updated to the latest version.
• Do not use on the remote controller.
153
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
If an Error Message is Displayed
If an error occurs, "- Error!" is displayed on the display of the unit. (""
represents an alphanumeric character.) Refer to the following descriptions and
check.
Error Code
• -01, -10:
The USB storage device cannot be recognized. Check if the USB storage
device or USB cable is securely inserted to the USB port of the unit.
Connect the USB storage device to an external power source if it has its own
power supply.
• -05, -13, -20, -21:
The firmware file is not present in the root folder of the USB storage device, or
the firmware file is for another model. Retry from the download of the firmware
file.
• Others:
After removing the power plug once, insert it to the outlet, and then start the
operation from the beginning.
154
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Initial Setup with Auto Start-up Wizard
Operations
TV’s REMOTE
INPUT
Inputs
TV
HDMI 1
HDMI 2
HDMI 3
When you turn the unit on for the first time after purchase, the Initial Setup screen
is automatically displayed on the TV to allow you to make settings required for
startup using simple operations following on-screen guidance.
1. Switch the input of the TV to the input connected to the unit.
2. Put batteries into the remote controller of this unit.
3. Press on the remote controller to turn the unit on.
4. Select the item with the cursors of the remote controller, and press ENTER to
confirm your selection. To return to the previous screen, press .
TV
/ / /
ENTER
CLEAR
155
+Fav
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
• If you have terminated the Initial Setup halfway, turn this unit to standby mode.
Then turning the power on again can display the Initial Setup again.
The Initial Setup appears on the screen each time the power is turned on
unless the Initial Set up is completed or "Never Show Again" is selected on the
first screen.
• To perform the Initial Setup again after the setting is completed, press ,
select "System Setup" - "Miscellaneous" - "Initial Setup", and press ENTER.
• If the power of this unit suddenly turns off, the wires in the speaker cables
have touched the rear panel or other wires, and the protection circuit is
working. Twist the wires again securely, and make sure they do not stick out of
the speaker terminals when connecting.
1. Place the supplied speaker setup microphone at the listening position, and
connect it to the SETUP MIC jack on the main unit.
„„ 1. Speaker Setup
Select the connected speaker configuration.
Note that the image on the screen changes each time you select the number of
channels in "Speaker Channels".
MCACC
SETUP MIC
„„ 2. Full Auto MCACC
Place the supplied speaker setup microphone at the listening position. The unit
automatically measures the test tones output from each speaker, and sets the
optimum volume level for each speaker, the crossover frequencies, and the
distance from the listening position. This also reduces the effect of the standing
wave in accordance with the viewing environment and automatically adjusts the
equalizers for the speakers, and enables correction of sound distortion caused by
the acoustic environment of the room.
• It takes between 3 and 12 minutes for calibration to be completed. Each
speaker outputs the test tone at high volume during measurement, so be
careful of your surroundings. Also, keep the room as quiet as possible during
measurement.
• If you connect a subwoofer, check the power and volume of the subwoofer.
Set the subwoofer volume to more than half.
When placing the speaker setup microphone on a tripod, refer to the
illustration.
2. Select "Next", and press ENTER. Then, test tones are output from each
speaker, and the connected speakers and the noise in the surrounding
environment are automatically measured.
3. The measurement results in step 2 are displayed. If there is no problem in
the detection result of the speaker, select "Next" and press ENTER to output
the test tone again to automatically set the settings such as volume level,
crossover frequency, etc., to their optimum. (The test tone is automatically
output when 10 seconds has elapsed without any operation.)
• When an error message is displayed or when the connected speakers
cannot be detected, perform re-measurement by selecting "Retry" and
pressing ENTER.
• When it cannot be resolved by performing the re-measurement, confirm
if the speakers are connected correctly. If there is any problem with the
speaker connection, perform the connection after disconnecting the power
cord.
4. Once the measurement is completed, it is possible to perform the
156
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
measurement in 2 additional listening positions. To perform the measurement,
select "Next" and press ENTER, then follow the instructions. To not perform
the measurement, select "Finish (Calculate)" and press ENTER.
5. Disconnect the speaker setup microphone.
„„ 3. Multi Zone Sound Check
Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in
addition to the main room.
ENTER.
„„ 5. ARC Setup
To connect with an ARC-compatible TV, select "Yes". The ARC setting on this unit
turns on, and you can listen to the TV's audio through this unit.
• If you select "Yes", the HDMI CEC function is enabled and power consumption
increases during standby.
„„ 4. Network Connection
Make the network connection settings. There are two methods for network
connection.
"Wired": Use a wired LAN to connect to a network.
"Wireless": Wi-Fi connection using an access point such as a wireless LAN
router. There are two methods for Wi-Fi connection.
"Scan Networks": Search for an access point from this unit. Find out the
SSID of the access point beforehand.
"Use iOS Device (iOS7 or later)": Share the Wi-Fi settings of your iOS
device with this unit.
If you select "Scan Networks", there are another two types of connection
methods. Check the following.
"Enter Password":Enter the password (or key) of the access point to connect.
"Push Button": If the access point is equipped with an automatic setting button,
you can connect without entering the password.
• If the SSID of the access point is not displayed, select "Other..." with the
cursor on the SSID list screen, press ENTER, and then follow the on-screen
instructions.
Keyboard Input
To switch between upper and lower cases, select "A/a" on the screen, and press
ENTER on the remote controller.
Press +Fav on the remote controller to select whether to mask the password
with "" or display it in plain text. Pressing CLEAR on the remote controller will
remove all the input characters.
• A confirmation screen asking you whether to agree to the privacy policy is
displayed during network setting. If you agree, select "Accept" and press
157
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Troubleshooting
„„Tuner164
„„BLUETOOTH function
164
„„Network function
165
„„USB storage device
166
„„Wireless LAN Network
166
„„Multi-zone function (for compatible models only) 167
„„Remote Controller
167
„„Display
167
„„Others
167
Before starting the procedure
Problems may be solved by simply turning the power on/off or disconnecting/
connecting the power cord, which is easier than working on the connection,
setting and operating procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or audio is not output or the
HDMI linked operation does not work, disconnecting/connecting the HDMI cable
may solve it. When reconnecting, be careful not to wind the HDMI cable since
if wound the HDMI cable may not fit well. After reconnecting, turn off and on the
unit and the connected device.
• The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event
that this happens, unplug the power cord from the wall outlet, wait at least
5 seconds, and then plug it back in.
• Our company is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit’s malfunction. Before you record
important data, make sure that the material will be recorded correctly.
When the unit is operating erratically
159
Try restarting the unit
159
Resetting the unit
(this resets the unit settings to the default)
159
Troubleshooting160
„„Power160
„„Audio160
„„Listening Modes
162
„„Video163
„„Linked operation
163
158
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
When the unit is operating erratically
❏❏Try restarting the unit
Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the STANDBY/ON button of the main unit for at least 5 seconds,
and then restart the unit. (The settings on this unit are kept.) If the problem persists after restarting the unit, unplug and plug the power cords of this unit and connected
devices.
❏❏Resetting the unit (this resets the unit settings to the default)
If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem.
If the unit is reset, your settings are restored to the default values. Be sure to note down your setting contents before performing the following operations.
1. While pressing the AUTO/DIRECT button on the main unit, press STANDBY/ON.
2. "Clear" is displayed on the display, and the unit returns to the standby state. Do not remove the power cord until "Clear" disappears from the display.
To reset the remote controller, while pressing and holding MODE, press the
button at least 3 seconds until the remote indicator blinks twice.
2
1
159
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Troubleshooting
„„ Power
❏❏Cannot turn on the unit
• Make sure that the power cord is properly plugged into the wall outlet.
• Unplug the power cord from the outlet once, wait 5 seconds or more, then plug it in again.
(
p73)
(
p131)
(
p61)
❏❏The unit turns off unexpectedly
• The unit automatically switches to standby when the "System Setup" - "Hardware" - "Power Management" - "Auto Standby" setting in the Home
screen functions.
• The protection circuit function may have operated. In such a case, if the power is turned on again, "AMP Diag Mode" is displayed on the main
unit’s display, and the unit enters the diagnosis mode to check the unit for abnormality. As the result, if no problem is found, "AMP Diag Mode"
on the display disappears. Then, you can use the unit normally. If "CHECK SP WIRE" appears on the display, the speaker cables may be shortcircuited. Check if the core wire of a speaker cable is not in contact with the core wire of another speaker cable or the rear panel, and turn the
power on again If "NG" is displayed, remove the power plug from the outlet immediately, and consult the dealer.
• The protection circuit function may have operated due to an abnormal rise in temperature of the unit. In such a case, the power turns off
repeatedly even if the power is turned on each time. Secure sufficient ventilation space around the unit, wait for a while until the temperature of
the unit decreases. Then, turn the power on again.
WARNING: If smoke, smell or abnormal noise is produced by the unit, unplug the power cord from the outlet immediately, and contact the dealer or
our company's Support.
„„ Audio
•
•
•
•
•
•
Make sure that the speaker setup microphone is no longer connected.
Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct.
Make sure that none of the connecting cables are bent, twisted, or damaged.
If the
indicator on the display blinks, press
on the remote controller to cancel muting.
While headphones are connected to the PHONES jack, no sound is output from the speakers.
When "System Setup" - "Source" - "Audio Select" - "Fixed PCM" in the Home Menu is set to "On", no sound is played when signals other than
PCM are input. Change the setting to Off.
Check the following if the problem persists after you have confirmed the above.
❏❏No sound from the TV
• Change the input selector on this unit to the position of the terminal to which the TV is connected.
• If the TV does not support the ARC function, along with the connection by an HDMI cable, connect the TV with this unit using a digital optical
cable, digital coaxial cable, or analog audio cable.
160
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏No sound from a connected player
• Change the input selector on this unit to the position of the terminal to which the player is connected.
• Check the digital audio output setting on the connected device. On some game consoles, such as those supporting DVD, the default setting may
be off.
• For some DVD-Video discs, you need to select an audio output format from a menu.
❏❏A speaker produces no sound
• Make sure that the polarity (+/-) of the speaker cables is correct, and that no bare wires are in contact with the metal part of speaker terminals.
• Make sure that the speaker cables are not shorting out.
• Check "Connect the Speaker Cables" ( p40) to see if the speaker connections have been made correctly. Settings for the speaker connection
environment need to be made in "Speaker Setup" in Initial Setup. Check "Initial Setup with Auto Start-up Wizard" ( p155).
• Depending on the input signal and listening mode, not much sound may be output from speakers. Select another listening mode to see if sound is
output.
• If surround back speakers are installed (for compatible models only), be sure to install surround speakers as well.
• A maximum of 7.1 ch playback is possible when Bi-Amping connection is used (for compatible models only). Be sure to remove the jumper bar on
the speakers when using Bi-Amping connection.
(
p40)
(
p123)
❏❏The subwoofer produces no sound
If the setting of the front speakers is "Large", the low range elements will be output from the front speakers instead of from the subwoofer during 2 ch
audio input of TV or music. To output the sound from the subwoofer, make one of the following settings.
1. Change the front speakers settings to "Small".
The low range elements will be output from the subwoofer rather than the front speakers. We do not recommend changing this if your front
speakers have good low range reproduction capabilities.
2. Change "Double Bass" to "On".
The low range elements of the front speakers will be output from both the front speakers and the subwoofer. Due to this, the bass sound may be
emphasized too much. In such a case, do not change the setting, or make the setting with the above option 1.
• For the setting details, refer to "System Setup" - "Speaker" - "Crossover".
• If the input signals do not contain subwoofer audio elements (LFE), the subwoofer may produce no sound.
❏❏Noise can be heard
• Using cable ties to bundle audio pin cables, power cords, speaker cables, etc. may degrade the audio performance. Do not bundle the cords.
• An audio cable may be picking up interference. Change the position of the cables.
❏❏The beginning of audio received by an HDMI IN cannot be heard
• Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately.
161
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏Sound suddenly reduces
• When using the unit for extended periods with the temperature inside the unit exceeding a certain temperature, the volume may be reduced
automatically to protect the circuits.
„„ Listening Modes
• To enjoy digital surround playback in formats such as Dolby Digital, you need to make a connection for audio signals with an HDMI cable, digital
coaxial cable or digital optical cable. Also, audio output need to be set to Bitstream output on the connected Blu-ray Disc player, etc.
• Press
on the remote controller several times to switch the display of the main unit, and you can check the input format.
Check the following if the problem persists after you have confirmed the above.
❏❏Cannot select a desired listening mode
• Depending on the connection status of the speaker, some listening modes may not be selected. Refer to "Selectable Listening Modes" in
"Listening Mode".
❏❏Cannot listen to the sound in Dolby TrueHD, Dolby Atmos or DTS-HD Master Audio format (for
compatible models only)
• You need to connect surround back speakers or height speakers to enjoy Dolby Atmos. Also, Dolby Atmos can be enjoyed only when the input
signals are in Dolby Atmos formats.
• If the audio in Dolby TrueHD, Dolby Atmos or DTS-HD Master Audio format cannot be output correctly in the source format, set "BD video
supplementary sound" (or reencode, secondary sound, video additional audio, etc.) to "Off" in the setting of a connected Blu-ray Disc player, etc.
After changing the setting, switch the listening mode to that for each source, and confirm.
❏❏About DTS signals
• With media that switches suddenly from DTS to PCM, PCM playback may not start immediately. In such a case, stop playback on the player side
for approx. 3 seconds or more. Then, resume playback. The playback will be performed normally.
• DTS playback may not be performed normally on some CD and LD players even if the player and this unit are digitally connected. If some
processing (e.g., output level adjustment, sampling frequency conversion, or frequency characteristic conversion) has been executed for the DTS
signal being output, this unit cannot recognize it as a genuine DTS signal, and noise may occur.
• While playing a DTS-compatible disc, if a pause or skip operation is performed on your player, noise may occur for a short period. This is not a
malfunction.
162
Front Panel≫ Rear Panel≫ Remote≫
(
p109)
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Video
• Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct.
• Make sure that none of the connecting cables are bent, twisted, or damaged.
• When the TV image is blurry or unclear, the power cord or connection cables of the unit may have interfered. In such a case, keep distance
between TV antenna cable and cables of the unit.
• Check the switching of the input screen on the monitor side such as a TV.
Check the following if the problem persists after you have confirmed the above.
❏❏No image appears.
• Change the input selector on this unit to the position of the terminal to which the player is connected.
❏❏No image from a device connected to HDMI IN jack
• To display video from the connected player on the TV while the unit is in standby, you need to enable "System Setup" - "Hardware" - "HDMI" "HDMI Standby Through" in the Home screen. For details of the HDMI Standby Through function, refer to "System Setup" - "Hardware" "■ HDMI".
• To output video to a TV connected to the HDMI OUT SUB jack (for compatible models only), press
on the remote controller to display "AV
Adjust", and select "Other" - "HDMI Out". Then, select the HDMI OUT jack for output.
• Check if "Resolution Error" is displayed on the main unit display when video input via HDMI IN jack is not displayed. In this case, the TV does not
support the resolution of the video input from the player. Change the setting on the player.
• Normal operation with an HDMI-DVI adapter is not guaranteed. In addition, video signals output from a PC are not guaranteed.
(
p130)
(
p147)
(
p129)
❏❏Images flicker
• The output resolution of the player may not be compatible with the resolution of the TV. If the player is connected to this unit with an HDMI cable,
change the output resolution on the player. Also this may be solved by changing the screen mode on the TV.
❏❏Video and audio are out of synch
• Depending on the settings on your TV and connection environment, the video may be behind the audio. Video may be delayed relative to audio
depending on the settings and connections with your television. To adjust, press
on the remote controller, and adjust in "Other" - "Sound Delay"
in the "AV Adjust".
„„ Linked operation
❏❏HDMI linked operation does not work with CEC-compliant devices, such as a TV
• In the Home screen of the unit, set "System Setup" - "Hardware" - "HDMI" - "HDMI CEC" to "On".
• It is also necessary to set HDMI linking on the CEC-compliant device. Check the instruction manual.
• When connecting a Sharp brand player or recorder to the HDMI IN jacks, set "System Setup" - "Hardware" - "HDMI" - "HDMI Standby Through" to
"Auto".
163
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Tuner
❏❏Poor reception or much noise
•
•
•
•
•
•
•
•
Recheck the antenna connection.
Move the antenna away from the speaker cord or power cord.
Move the unit away from your TV or PC.
Passing cars or airplanes in the vicinity can cause interference.
If radio waves are blocked by concrete walls, etc., radio reception may be poor.
Change the reception mode to mono.
Operating the remote controller during AM reception may cause noise.
FM reception may be clearer if you use the antenna jack on the wall used for the TV.
(
p69)
(
p145)
„„ BLUETOOTH function
• Unplug and plug the power cord of the unit, or turn off and on the BLUETOOTH-enabled device. Restart of the BLUETOOTH-enabled device may
be effective.
• BLUETOOTH-enabled devices must support the A2DP profile.
• Because a radio wave interference will occur, this unit may not be used near devices such as a microwave oven or cordless phone which use the
radio wave in the 2.4 GHz range.
• A metallic object near the unit can affect on the radio wave, and BLUETOOTH connection may not be possible.
Check the following if the problem persists after you have confirmed the above.
❏❏Cannot connect with this unit
• Check if the BLUETOOTH function of the BLUETOOTH-enabled device is enabled.
❏❏Music playback is unavailable on the unit even after successful BLUETOOTH connection
• When the audio volume of your BLUETOOTH-enabled device is set low, the audio may not be played back. Turn up the volume of the
BLUETOOTH-enabled device.
• Depending on the BLUETOOTH-enabled device, the Send/Receive selector switch may be equipped. Select Send mode.
• Depending on the characteristics or specifications of the BLUETOOTH-enabled device, music may not be played back on this unit.
❏❏Sound is interrupted
• There may a problem with the BLUETOOTH-enabled device. Check the information on a web page.
❏❏The audio quality is poor after connection with a BLUETOOTH-enabled device
• The BLUETOOTH reception is poor. Move the BLUETOOTH-enabled device closer to the unit, or remove any obstacle between the
BLUETOOTH-enabled device and this unit.
164
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Network function
•
•
•
•
If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up.
When the NET indicator is blinking, this unit is not properly connected to the home network.
Unplug and plug the power cords of this unit and the router, or restart the router.
If the desired router is not displayed in the access point list, it may be set to hide SSID, or the ANY connection may be off. Change the setting and
try again.
Check the following if the problem persists after you have confirmed the above.
❏❏Cannot access the Internet radio
•
•
•
•
In the case the service provider has terminated the service, the network service or contents may not be used on this unit.
Check if your modem and router are properly connected, and they are both turned on.
Check if the LAN side port on the router is properly connected to this unit.
Check if connecting to Internet from other devices is possible. If it is not possible, turn off all devices connected to the network, wait for a while,
and then turn on the devices again.
• If only the specific radio station is unavailable for listening, check if he registered URL is correct, and if the format distributed from the radio station
is supported by this unit.
• Depending on ISP, setting the proxy server is required.
• Check if the router and modem you are using are supported by your ISP.
❏❏Cannot access the network server
•
•
•
•
This unit needs to be connected to the same router as the network server.
This unit supports the Windows Media® Player 11 or 12 network servers, or NASes that support the home network function.
Windows Media® Player may require some settings. Refer to "Playing back files on a PC and NAS (Music Server)".
When using a PC, only the music files registered in the library of Windows Media® Player can be played.
❏❏Sound is interrupted when playing music files on the network server
• Check if the network server meets the requirements for operation.
• When the PC is serving as the network server, quit application software other than the server software (Windows Media® Player 12, etc.).
• If the PC is downloading or copying large files, the playback sound may be interrupted.
❏❏The initial setup of Chromecast built-in cannot be performed on Pioneer Remote App
• If you have agreed to the privacy policy that requires agreement to use the Chromecast built-in function during the Initial Setup of this unit, you do
not have to agree to the privacy policy on Pioneer Remote App.
165
Front Panel≫ Rear Panel≫ Remote≫
(
p86)
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ USB storage device
❏❏USB storage device is not displayed
•
•
•
•
•
Check if the USB storage device or USB cable is securely inserted to the USB port of the unit.
Disconnect the USB storage device once from the unit, and then reconnect it.
Performance of the hard disk that receive power from the USB port of the unit is not guaranteed.
Depending on the type of content, the playback may not be performed normally. Check the types of supported file formats.
Operations of USB storage devices equipped with security functions are not guaranteed.
„„ Wireless LAN Network
• Unplug and plug the power cords of this unit and the wireless LAN router, check the power-on status of the wireless LAN router, or restart the
wireless LAN router.
Check the following if the problem persists after you have confirmed the above.
❏❏Cannot access wireless LAN network
• The wireless LAN router setting may be switched to Manual. Restore the setting to Auto.
• Try the manual set-up. The connection may succeed.
• When the wireless LAN router is in stealth mode (mode to hide SSID) or when the ANY connection is off, the SSID is not displayed. Change the
setting and try again.
• Check if the SSID and encryption settings (WEP, etc.) are correct. Match the network settings with the settings of this unit.
• Connection to an SSID that includes multi-byte characters is not supported. Set the SSID of the wireless LAN router using single-byte
alphanumeric characters only, and try again.
❏❏Connected to an SSID different from the selected SSID
• Some wireless LAN routers allow you to set multiple SSIDs for one unit. If connecting to such a router using the automatic setting button, you may
end up connecting to an SSID different from the SSID you want to connect to. If this occurs, use the connection method requiring you to enter a
password
❏❏Playback sound is interrupted, or communication is not possible
• You may not receive radio waves due to poor radio wave conditions. Shorten the distance from the wireless LAN router, or remove obstacles to
improve visibility, and connect again. Install the unit away from microwave ovens or other access points. It is recommended to install the wireless
LAN router and the unit in the same room.
• If there is a metallic object near the unit, wireless LAN connection may not be possible because the metal affects the radio wave.
• When other wireless LAN devices are used near the unit, other symptoms may occur, such as interrupted playback and impossible
communication. You can avoid those problems by changing the channel of your wireless LAN router. For instructions on changing channels, refer
to the instruction manual supplied with your wireless LAN router.
• There may not be enough bandwidth available in wireless LAN. Use a wired LAN for connection.
166
Front Panel≫ Rear Panel≫ Remote≫
(
p83)
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Multi-zone function (for compatible models only)
❏❏Cannot ZONE-output the audio of externally connected AV components
• To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI IN1 to IN3 jacks. If the AV component is not
equipped with an HDMI jack, use a digital coaxial cable, digital optical cable or analog audio cable. Also, the audio from externally connected AV
components can be output to ZONE 2 only when the audio is analog or 2ch PCM signal. When the AV component is connected to this unit with an
HDMI cable, digital coaxial cable or digital optical cable, change the audio output of the AV component to the PCM output.
• When video and audio via HDMI input are output to ZONE 2, set "Input/Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( p118) to "Use" on
the System Setup menu.
• To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Also, audio from externally
connected AV components can be output to ZONE 3 only when it is an analog audio signal.
(
p67)
(
p98)
(
p7)
❏❏Others
• If the audio signal is from the NET or USB input selector, zone output is not possible for DSD and Dolby TrueHD audio signals.
„„ Remote Controller
•
•
•
•
•
Make sure that the batteries are inserted with the correct polarity.
Insert new batteries. Do not mix different types of batteries, or old and new batteries.
Make sure that the sensor of the main unit is not subjected to direct sunlight or inverter-type fluorescent lights. Relocate it if necessary.
If the main unit is installed in a rack or cabinet with colored-glass doors, or if the doors are closed, the remote controller may not work normally.
After operating the Multi-zone function (for compatible models only), the remote controller mode may be switched to the mode for operating the
ZONE output audio. Check "Multi-zone", and switch the remote controller mode to the mode for controlling the main room.
„„ Display
❏❏The display does not light up
• When the Dimmer function is working, the display may go dim or turn off (for compatible models only). Press the DIMMER button, and change the
brightness level of the display.
„„ Others
❏❏Strange noise can be heard from the unit
• If you have connected another device to the same outlet as this unit, strange noise may occur under the influence of the device. If the symptom is
remedied by removing the power plug of the other device from the outlet, use different outlets for this unit and the device.
167
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
❏❏The message "Noise Error" appears during Full Auto MCACC
• This can be caused by a malfunction in your speaker unit. Check the speaker output, etc.
❏❏The measurement results of Full Auto MCACC show different distances to the speakers from the
actual ones
• Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "System
Setup" - "Speaker" - "Distance".
❏❏The measurement results of Full Auto MCACC show that the volume level of the subwoofer has been
corrected to the lower limit
• The volume level correction of the subwoofer may not have been completed. Lower the volume of the subwoofer before Full Auto MCACC
measurement.
❏❏DRC function does not work
• Make sure the source material is Dolby Digital, Dolby Digital Plus, Dolby TrueHD, or DTS.
168
Front Panel≫ Rear Panel≫ Remote≫
(
p124)
Contents ≫ Connections ≫ Playback ≫ Setup ≫
About HDMI
Compatible functions
transmitted to the TV.
HDMI (High Definition Multimedia Interface) is a digital interface standard for
connecting TVs, projectors, Blu-ray Disc/DVD players, digital tuners, and other
video components. Several separate video and audio cables have been required
to connect AV components so far. With HDMI, a single cable can transmit control
signals, digital video and digital audio (2-channel PCM, multichannel digital audio,
and multichannel PCM).
Deep Color:
By connecting devices supporting Deep Color, video signals input from the
devices can be reproduced on the TV with even more colors.
HDMI CEC function:
By connecting a device that complies with CEC (Consumer Electronics Control)
of the HDMI standard using an HDMI cable, a variety of linked operations
between devices are possible. This function enables various linking operations
with players, such as switching input selectors interlocking with a player,
adjusting the volume of this unit using the remote controller of a TV, and
automatically switching this unit to standby when the TV is turned off.
The unit is designed to link with products that comply with the CEC standard,
however, linked operation is not always guaranteed with all CEC devices.
For linked functions to work properly, do not connect CEC-compliant devices
exceeding the connectable number to the HDMI jack as shown below.
• Blu-ray Disc/DVD players: up to 3 units
• Blu-ray Disc/DVD recorders: up to 3 units
• Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up to
4 units
Operation has been confirmed on the following devices: (As of January 2018)
Toshiba brand televisions; Sharp brand televisions; Toshiba brand players and
recorders; Sharp brand players and recorders (when used with a Sharp brand
television)
3D:
You can transmit 3D video signals from AV components to the TV.
x.v.Color™:
This technology reproduces even more realistic colors by expanding the color
gamut.
4K:
This unit supports 4K (3840×2160p) and 4K SMPTE (4096×2160p) video signals.
Lip Sync:
This setting automatically corrects desynchronization between the video and
audio signals based on the information from the HDMI Lip Sync-compatible TV.
Copyright Protection:
The HDMI jack of this unit conforms to the Revision 1.4 and Revision 2.2
standards of the HDCP (High-bandwidth Digital Content Protection), a copy
protection system for digital video signals. Other devices connected to the unit
must also conform to the HDCP standards.
ARC (Audio Return Channel):
By connecting an ARC-compliant TV with a single HDMI cable, you can output
the audio and video from this unit to the TV, and also input the audio from the TV
to this unit.
HDMI Standby Through:
Even if this unit is in standby mode, the input signals from AV components can be
169
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Supported Audio Formats
–– 4K (3840×2160p) 24/25/30Hz, 4K SMPTE (4096×2160p) 24/25/30Hz :
RGB/YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit)
–– 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×2160p) 50/60Hz :
YCbCr4:2:0 (8 bit)
2 ch linear PCM:
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit
Multi-channel linear PCM:
Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz, 16/20/24 bit
Bitstream:
Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTSHD High Resolution Audio, DTS-HD Master Audio
DSD:
Supported sampling rates: 2.8 MHz
Your Blu-ray Disc/DVD player must also support the HDMI output of the above
audio formats.
Supported resolutions
HDMI IN1 to IN6:
• Copyright protection technology: HDCP1.4/HDCP2.2
• Color space (Color Depth):
–– 720×480i 60Hz, 720×576i 50Hz, 720×480p 60Hz, 720×576p 50Hz,
1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p
24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p
24/25/30/50/60Hz, 4K (3840×2160p) 24/25/30Hz, 4K SMPTE
(4096×2160p) 24/25/30Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2
(12 bit)
–– 4K (3840×2160p) 50/60Hz, 4K SMPTE (4096×2160p) 50/60Hz : RGB/
YCbCr4:4:4 (8 bit), YCbCr4:2:2 (12 bit), YCbCr4:2:0 (8/10/12 bit)
AUX INPUT HDMI (front):
• Copyright protection technology: HDCP1.4/HDCP2.2
• Color space (Color Depth):
–– 720×480i 60Hz, 720×576i 50Hz, 720×480p 60Hz, 720×576p 50Hz,
1920×1080i 50/60Hz, 1280×720p 24/25/30/50/60Hz, 1680×720p
24/25/30/50/60Hz, 1920×1080p 24/25/30/50/60Hz, 2560×1080p
24/25/30/50/60Hz : RGB/YCbCr4:4:4 (8/10/12 bit), YCbCr4:2:2 (12 bit)
170
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
General Specifications
„„ Amplifier Section
Rated Output Power (FTC) (North American)
With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 120
watts per channel minimum RMS power, with no more than 0.08% total
harmonic distortion from 250 milliwatts to rated output.
Rated Output Power (IEC) (Others)
9 ch × 180 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD
Maximum Effective Output Power (North American)
230 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD
Maximum Effective Output Power (JEITA) (Asian and Australian)
9 ch × 215 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD
Dynamic Power (*)
* IEC60268-Short-term maximum output power
250 W (3 Ω, Front)
220 W (4 Ω, Front)
130 W (8 Ω, Front)
THD+N (Total Harmonic Distortion+Noise)
0.08% (20 Hz - 20,000 Hz, half power)
Input Sensitivity and Impedance
200 mV/47 kΩ (LINE (RCA))
3.5 mV/47 kΩ (PHONO MM)
Rated RCA Output Level and Impedance
1 V/470 Ω (PRE OUT)
1 V/470 Ω (SUBWOOFER PRE OUT)
1 V, 200 mV/470 Ω (ZONE 2 PRE/LINE OUT)
1 V, 200 mV/470 Ω (ZONE 3 PRE/LINE OUT)
Phono Maximum Input Signal Voltage
70 mV (MM 1 kHz 0.5%)
Frequency Response
5 Hz - 100 kHz/+1 dB, –3 dB (Direct/Pure Direct)
Tone Control Characteristics (MAIN)
±10 dB, 20 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Tone Control Characteristics (ZONE 2)
±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
106 dB (IHF-A, LINE IN, SP OUT)
80 dB (IHF-A, PHONO IN, SP OUT)
Speaker Impedance
4 Ω - 16 Ω
Headphone Rated Output
85 mW + 85 mW (32 Ω, 1 kHz, 10% THD)
Supported impedance of Headphones
8 Ω - 600 Ω
Headphones Frequency Response
10 Hz - 100 kHz
„„ Video Section
Signal level
1 Vp-p/75 Ω (Composite Video)
1 Vp-p/75 Ω (Component Video Y)
0.7 Vp-p/75 Ω (Component Video Pb/Pr)
Maximum resolution supported by component video
480i/576i
„„ Tuner Section
FM Tuning Frequency Range
87.5 MHz - 107.9 MHz (North American)
87.5 MHz - 108.0 MHz, RDS (Others)
50dB quieting sensitivity (FM MONO)
1.56 μV, 15.0 dBf (IHF, 1kHz, 100% MOD)
AM Tuning Frequency Range
530 kHz - 1710 kHz (North American)
522/530 kHz - 1611/1710 kHz (Others)
Preset Channel
40
171
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
„„ Network Section
„„ General
Ethernet LAN
10BASE-T/100BASE-TX
Wireless LAN
IEEE 802.11 a/b/g/n standard
(Wi-Fi® standard)
5 GHz/2.4 GHz band
Power Supply
AC 120 V, 60 Hz (North American)
AC 220 - 240 V, 50/60 Hz (Others)
Power Consumption
850 W (North American)
870 W (Others)
0.15 W (Full Standby mode)
1.5 W (Network Standby (wired)) (North American)
1.6 W (Network Standby (wired)) (Others)
1.8 W (Network Standby (wireless)) (North American)
1.9 W (Network Standby (wireless)) (Others)
1.5 W (Bluetooth Wakeup)
0.15 W (HDMI CEC)
2 W (Standby mode (ALL ON)) (North American)
2.2 W (Standby mode (ALL ON)) (Others)
70 W (No-sound)
6.1 W (HDMI Standby Through) (North American)
6.2 W (HDMI Standby Through) (Others)
Dimensions (W × H × D)
435 mm × 185 mm × 386 mm
17-1/8" × 7-5/16" × 15-3/16"
Weight
13.0 kg (28.7 lbs.)
Maximum radio-frequency power transmitted in the frequency band(s)
2400 MHz - 2483.5 MHz (20 dBm (e.i.r.p))
5150 MHz - 5350 MHz (22 dBm (e.i.r.p))
5470 MHz - 5725 MHz (22 dBm (e.i.r.p))
„„ BLUETOOTH Section
Communication system
BLUETOOTH Specification version 4.1+LE
Frequency band
2.4 GHz band
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP 1.2
AVRCP 1.3
HOGP-Host (Client)
HOGP-HID Device (Server)
HID Service (HIDS)
Supported Codecs
SBC
AAC
Transmission range (A2DP)
20 Hz - 20 kHz (Sampling frequency 44.1 kHz)
Maximum communication range
Line of sight approx. 15 m (*)
* The actual range will vary depending on factors such as obstacles between
devices, magnetic fields around a microwave oven, static electricity,
cordless phone, reception sensitivity, antenna's performance, operating
system, software application, etc.
„„ HDMI
Input
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (GAME), IN4 (STRM BOX), IN5, IN6,
AUX INPUT HDMI (front)
Output
OUT MAIN (ARC), OUT ZONE 2/SUB
172
Front Panel≫ Rear Panel≫ Remote≫
Contents ≫ Connections ≫ Playback ≫ Setup ≫
Supported
Deep Color, x.v.Color™, Lip Sync, Audio Return Channel, 3D, 4K, CEC,
Extended Colorimetry (sYCC601, Adobe RGB, Adobe YCC601), Content
Type, HDR, Dolby Vision
Audio Format
Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X,
DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTSES, DTS Express, DSD, PCM
HDCP version
2.2
Maximum Video Resolution
4k 60 Hz (YCbCr 4:4:4)
„„ Video Inputs
Component
IN1 (BD/DVD)
Composite
IN1 (CBL/SAT), IN2 (STRM BOX)
„„ Supported input resolutions
HDMI input
4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p
Component input
480i/576i
Composite input
480i/576i
• The output from the HDMI OUT jack to the TV is the same resolution as the
input. When using a TV that supports 4K, 1080p HDMI video signals can also
be output as 4K.
„„ Audio Outputs
Analog
PRE OUT (FRONT L/R, CENTER, SURROUND L/R, HEIGHT 1 L/R,
SURROUND BACK L/R, 2 SUBWOOFER, HEIGHT 2 L/R)
ZONE2 PRE/LINE OUT
ZONE3 PRE/LINE OUT
Speaker Outputs
FRONT L/R, CENTER, SURROUND L/R, HEIGHT 1 L/R, SURROUND
BACK L/R or HEIGHT 2 L/R or ZONE 3 L/R, ZONE 2 L/R (North American
models support banana plugs.)
Phones
PHONES (Front, ø 6.3 mm, 1/4")
„„ Others
Setup Mic: 1 (Front)
USB: 2 (Ver. 2.0, 5 V/500 mA)
Ethernet: 1
RS232: 1
IR IN: 1
IR OUT: 1
12V TRIGGER OUT: 2 (A: 100 mA, B: 25 mA)
„„ Power consumption in standby mode
• In the following cases, the power consumption in standby mode may reach up
to a maximum of 14 W:
–– When "Network Standby" is set to "On"
–– When "HDMI CEC" is set to "On"
–– When "HDMI Standby Through" is set to other than "Off"
–– When "Bluetooth Wakeup" is set to "On"
–– When "USB Power Out at Standby" is set to "On"
„„ Audio Inputs
Digital
OPTICAL 1 (BD/DVD), 2 (TV)
COAXIAL (CD)
Analog
BD/DVD, CBL/SAT, STRM BOX, CD, PHONO
Specifications and features are subject to change without notice.
❏❏
173
License and Trademark
Front Panel≫ Rear Panel≫ Remote≫
SN 29403471_EN
© 2018 Onkyo & Pioneer Corporation. All rights reserved.
© 2018 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés.
http://pioneer-audiovisual.com/privacy/
“Pioneer” and “MCACC logo” are trademarks of Pioneer Corporation, and are used under license.
H1805-0
Bedienungsanleitung
VSX-LX503
Inhalt
≫
Verbindungen
≫
- Anschließen der Lautsprecher
≫
Wiedergabe
≫
Einrichtung
≫
Fehlerbehebung
≫
Anhang
≫
Ergänzende Informationen
≫
AV RECEIVER
De
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Lieferumfang5
Teilenamen6
Bedienfeld6
Display8
Rückseite9
Fernbedienung11
Anschließen einer AV-Komponente in einem separaten
Raum (Multi-Zonen-Verbindung)
66
Anschließen eines Fernsehgeräts (ZONE 2)
66
Anschließen eines Vorverstärkers (ZONE 2)
67
Anschließen eines Vorverstärkers (ZONE 3)
68
Anschließen von Antennen
69
Netzwerkverbindung70
Anschluss von externen Steuergeräten
71
IR IN/OUT-Anschluss
71
12V TRIGGER OUT-Buchse
72
Anschließen des Netzkabels
73
Verbindungen
Anschließen der Lautsprecher
13
Lautsprecherinstallation14
Einstellungen für Lautsprecheranschlüsse und
"Speaker Setup"
40
Anschließen eines Leistungsverstärkers
57
Lautsprecherkombinationen58
Anschließen des Fernsehers
59
An ARC-Fernseher
60
An Nicht-ARC-Fernseher
61
Anschließen von Wiedergabegeräten
62
Anschließen einer AV-Komponente mit HDMI-Buchse 62
Anschließen einer AV-Komponente ohne
HDMI-Buchse63
Anschließen einer Audiokomponente
64
Anschließe einer Videokamera usw.
65
Wiedergabe
Wiedergabe von AV-Komponenten
75
Grundlegende Bedienung
75
®
BLUETOOTH -Wiedergabe76
Grundlegende Bedienung
76
Internetradio77
Wiedergabe77
Spotify79
Wiedergabe79
AirPlay®80
Grundlegende Bedienung
80
2
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
DTS Play-Fi®81
Wiedergabe81
FlareConnectTM82
Wiedergabe82
USB-Speichergerät83
Grundlegende Bedienung
83
Gerät und unterstütztes Format
85
Wiedergabe von Dateien auf einem PC und NAS
(Music Server)
86
®
Windows Media Player-Einstellungen
86
Wiedergabe87
Unterstützte Audioformate
90
Play Queue
91
Initial Setup
91
Hinzufügen von Play Queue-Informationen
91
Sortieren und Löschen
92
Wiedergabe92
Wiedergabe von AM/FM-Radio
93
Einstellung eines Radiosenders
93
Voreinstellen eines Radiosenders
95
Verwenden von RDS (Modelle für Europa, Australien
und Asien)97
Multizonenfunktion98
Fernbedienungsmodus umschalten (ZONE 2)
99
Fernbedienungsmodus umschalten (ZONE 3)
100
Wiedergabe101
Wiedergabemodus103
Wählen eines Wiedergabemodus
103
Wiedergabemodus-Effekte
106
Auswählbare Wiedergabemodi
109
Einrichtung
Einrichten des Systems
115
Menü-Liste115
Menübedienung117
Input/Output Assign
118
Speaker122
Audio Adjust
127
Source128
Hardware129
Multi Zone
135
Miscellaneous137
MCACC138
Menübedienung138
Full Auto MCACC
139
3
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Anhang
Manual MCACC
140
MCACC Data Check
142
Network/Bluetooth143
Menübedienung143
Network144
Bluetooth145
AV Adjust
147
Menübedienung147
Web-Einrichtung149
Menübedienung149
Firmware Update
150
Update-Funktion dieses Geräts
150
Aktualisierung der Firmware über das Netzwerk
151
Update über USB
153
Initial Setup mit dem automatischen
Startup-Assistenten155
Bedienungen155
Über HDMI
Allgemeine Spezifikationen
Fehlerbehebung
Erratische Gerätefunktionsweise
159
Fehlerbehebung160
4
Bedienfeld≫ Rückseite≫ Fernbedienung≫
169
171
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Lieferumfang
1. Hauptgerät (1)
2. Fernbedienung (RC-957R) (1), Batterien (AAA/R03) (2)
3. Messmikrofon zur Lautsprechereinrichtung (1)
• Wird beim Initial Setup verwendet.
4. FM-Zimmerantenne (1)
5. AM-Rahmenantenne (1)
6. Netzkabel (1)
• Kurzanleitung (1)
* Bei diesem Dokument handelt es sich um eine Online-Bedienungsanleitung.
Die Bedienungsanleitung wird nicht als Zubehör mitgeliefert.
1
2
3
4
5
• Schließen Sie Lautsprecher mit einer Impedanz von 4 Ω bis 16 Ω. an.
• Das Netzkabel darf erst angeschlossen werden, wenn alle anderen
Verbindungen vorgenommen wurden.
• Wir übernehmen keine Haftung für Schäden, die beim Anschließen von
Drittanbietergeräten entstehen.
• Netzwerkdienste und Inhalte, die verwendet werden können, sind
möglicherweise nicht mehr verfügbar, wenn neue Funktionen durch
Aktualisieren der Firmware hinzugefügt werden oder Dienste von
Dienstanbietern beendet werden. Außerdem können die verfügbaren Dienste
je nach Ihrem Gebiet variieren.
• Details zum Firmware-Update werden zu einem späteren Zeitpunkt auf
unserer Website und über andere Kanäle bekanntgegeben.
• Änderungen der technischen Daten und des Erscheinungsbildes ohne
vorherige Ankündigung vorbehalten.
6
5
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Teilenamen
Bedienfeld
1
2 345678
9
bk blbm bn
bo
cr
bp
bq br bs bt ck cl cm cn co
cp cq cr
❏❏ Einzelheiten siehe (
6
p7)
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
1. INPUT SELECTOR-Regler: Hier kann der wiederzugebende Eingang
gewechselt werden.
2. MCACC-Anzeige: Diese Anzeige leuchtet, wenn Sie die
Lautsprecherkalibrierung mit MCACC aktiviert haben. ( p139, 156)
3. FL OFF-Anzeige: Diese Anzeige leuchtet, wenn Sie mehrfach DIMMER
gedrückt haben, um das Display auszuschalten.
4. INFO-Taste: Schaltet die Information im Display um. ( p105)
5. ZONE 2 ON/OFF-Taste: Schaltet ZONE 2 ein/aus. ( p101)
6. ZONE 3 ON/OFF-Taste: Schaltet ZONE 3 ein/aus. ( p101)
7. ZONE CONTROL-Taste: Hiermit wird die Multizonenfunktion gesteuert.
( p101)
8. MULTI-ZONE MUSIC-Taste: Hiermit wird die MULTI-ZONE MUSIC-Funktion
zur Wiedergabe der gleichen Quelle in allen mit der Multizone verbundenen
Räumen aktiviert. ( p102)
9. Display ( p8)
10.Wiedergabemodustasten: Drücken Sie "AUTO/DIRECT", "SURROUND" oder
"STEREO", um den Wiedergabemodus zu wechseln. ( p103)
11.NETWORK-Anzeige: Leuchtet, wenn "NET" mit dem Eingangsselektor
ausgewählt wurde und das Gerät mit dem Netzwerk verbunden ist. Diese
Anzeige leuchtet, wenn sich das Gerät im Standby-Modus befindet und
Funktionen wie HDMI CEC und Netzwerk-Standby aktiviert sind. Die Anzeige
leuchtet jedoch nicht, wenn ZONE 2/ZONE 3 aktiv ist.
12.Fernbedienungssensor: Empfängt Signale von der Fernbedienung.
• Der Signalbereich der Fernbedienung liegt innerhalb von zirka 16´/5 m bei
einem Winkel von 20° zur Senkrechten und 30° zu den Seiten.
13.WIRELESS-Anzeige: Leuchtet, wenn das Gerät mit dem Drahtlos-Netzwerk
sowie einem BLUETOOTH-fähigen Gerät verbunden ist.
14.MASTER VOLUME
15. STANDBY/ON-Taste
16.ADJUST-Taste: Einstellungen wie "Tone" und "Level" können während der
Wiedergabe rasch auf dem Fernsehbildschirm vorgenommen werden.
( p147)
17.HOME Taste: Zeigt das Home-Bild an. ( p117, 138, 143)
18.Cursortasten ( / / / ) und ENTER-Taste: Wählen Sie das Element mit
den Cursortasten aus und drücken Sie ENTER zum Bestätigen. Verwenden
Sie diese, um bei Verwendung von TUNER die Sender einzustellen.
( p93)
19.RETURN-Taste: Hiermit wird die vorige Anzeige wiederhergestellt.
20.TUNING MODE-Taste: Schaltet den Sendersuchmodus um. ( p93)
21.PHONES-Buchse: Hier können Kopfhörer mit Standardstecker (ø1/4"/6,3 mm)
angeschlossen werden.
22.MCACC SETUP MIC-Buchse: Das mitgelieferte Messmikrofon zur
Lautsprechereinrichtung ist angeschlossen. ( p139, 156)
23.PHASE CONTROL-Taste: Hiermit wird die Phasenanschnittsteuerung
(Korrektur von Phasenstörungen im niederfrequenten Bereich zur
Bassverstärkung) aktiviert/deaktiviert. ( p148)
24.USB-Port: Ein USB-Speichergerät wird angeschlossen, sodass die darauf
gespeicherten Musikdateien abgespielt werden können. ( p83) Es
können auch USB-Geräte über ein USB-Kabel mit Strom versorgt werden
(5 V/500 mA).
25.AUX INPUT HDMI-Buchse: Hier können Sie Geräte wie Videokameras über
ein HDMI-Kabel anschließen. ( p65)
26.DIMMER-Taste: Sie können das Display ausschalten oder die Helligkeit des
Displays in drei Stufen anpassen.
27.Vordere Klappe
7
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Display
1
2
3
4
7
56
8 9
SLEEP: Die Schlummerfunktion ist aktiviert. ( p131)
AUTO STBY: Auto-Standby ist aktiviert. ( p131)
5. Leuchtet, wenn Kopfhörer angeschlossen sind.
6. Blinkt, wenn die Stummschaltung aktiv ist.
7. Zeigt verschiedene Informationen zu den Eingangssignalen an.
8. Leuchtet bei der Lautstärkeregelung.
9. Lautsprecher-/Kanalanzeige: Zeigt den Ausgabekanal an, der dem
ausgewählten Wiedergabemodus entspricht.
1. Leuchtet möglicherweise, wenn Bedienvorgänge mit dem "NET". "USB"
Eingangsselektor.
2. Leuchtet unter den folgenden Bedingungen.
Z2/Z3: ZONE 2/ZONE 3 ist eingeschaltet.
: Verbunden über BLUETOOTH.
: Verbunden über Wi-Fi.
NET: Leuchtet bei Verbindung zum Netzwerk mit dem "NET" Eingangsselektor.
Blinkt, wenn falsch mit dem Netzwerk verbunden.
USB: Leuchtet, wenn der Eingangsselektor "USB" ausgewählt ist, ein
USB-Gerät angeschlossen ist und der USB-Eingang ausgewählt ist. Blinkt,
wenn das USB-Gerät nicht korrekt angeschlossen wurde.
HDMI: HDMI-Signale werden eingegeben, und der HDMI-Eingang ist
ausgewählt.
DIGITAL: Digitale Signale werden eingegeben, und der digitale Eingang ist
ausgewählt.
3. Leuchtet je nach Typ des digitalen Audioeingangssignals und nach
Wiedergabemodus.
4. Leuchtet unter den folgenden Bedingungen.
RDS (Modelle für Europa, Australien und Asien): Es werden RDSÜbertragungen empfangen.
TUNED: Empfang von AM/FM-Radio.
STEREO: Es wird FM-Stereo empfangen.
8
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Rückseite
90°
180°
❏❏ Einzelheiten siehe (
9
p10)
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
1. DIGITAL AUDIO IN OPTICAL/COAXIAL-Buchsen: Hier können digitale
Audiosignale von Fernsehern oder AV-Komponenten über ein digitales
optisches Kabel oder ein digitales Koaxialkabel eingegeben werden.
2. ANTENNA AM LOOP/FM UNBAL 75Ω-Klemme: Zum Anschließen der
mitgelieferten Antennen.
3. COMPONENT VIDEO IN-Buchsen: Es können Videosignale einer AVKomponente über ein Component-Videokabel eingegeben werden. (Nur mit
den Auflösungen 480i oder 576i kompatibel.)
4. USB-Port: Ein USB-Speichergerät wird angeschlossen, sodass die darauf
gespeicherten Musikdateien abgespielt werden können. ( p83) Es
können auch USB-Geräte über ein USB-Kabel mit Strom versorgt werden
(5 V/500 mA).
5. VIDEO IN-Buchse: Es können Videosignale einer AV-Komponente über ein
analoges Videokabel eingegeben werden.
6. NETWORK-Port: Stellen Sie über LAN-Kabel eine Netzwerkverbindung her.
7. Kabellose Antenne: Zur Verwendung bei Wi-Fi-Verbindungen oder
BLUETOOTH-fähigen Geräten. Stellen Sie ihre Winkel entsprechend dem
Verbindungsstatus ein.
8. RS-232C-Port: Schließen Sie ein Heimsteuerungssystem mit einem RS-232CPort an. Wenden Sie sich bezüglich eines Heimsteuerungssystems an die
betreffenden Fachgeschäfte.
9. HDMI OUT-Buchsen: Hier können Video- und Audiosignale über ein HDMIKabel übertragen werden, das an einen Monitor wie einen Fernseher oder
Projektor angeschlossen ist.
10.HDMI IN-Buchsen: Hier können Video- und Audiosignale über ein HDMI-Kabel
übertragen werden, das an eine AV-Komponente angeschlossen ist.
11.AC IN: Hier wird das mitgelieferte Netzkabel angeschlossen.
12.SIGNAL GND-Klemme: Hier wird der Erdungsleiter des Plattenspielers
angeschlossen.
13.AUDIO IN-Buchsen: Hier ist ein Audiosignaleingang von AV-Komponenten
über ein analoges Audiokabel möglich.
14.IR IN/OUT-Anschluss: Schließen Sie eine Fernbedienungsempfängereinheit
an. ( p71)
15.12V TRIGGER OUT A/B-Buchse: Schließen Sie ein Gerät mit
12-V-Triggereingangsbuchse an, um Power-Link-Betrieb zwischen dem
anderen Gerät und diesem Gerät zu erlauben. ( p72)
16.SPEAKERS-Klemmen: Hier können Lautsprecher über Lautsprecherkabel
angeschlossen werden. (Modelle für Nordamerika unterstützen
Bananenstecker.)
17.PRE OUT-Buchsen: Es kann ein Leistungsverstärker angeschlossen werden.
( p57)
18.SUBWOOFER PRE OUT-Buchse: Hier kann ein aktiver Subwoofer mit einem
Subwoofer-Kabel angeschlossen werden. Es können bis zu zwei aktive
Subwoofer angeschlossen werden. Es wird von jeder SUBWOOFER PRE
OUT-Buchse das gleiche Signal ausgegeben.
19.ZONE 3 PRE/LINE OUT-Buchsen: Es können Audiosignale über ein analoges
Audiokabel, angeschlossen an einen Vorverstärker oder Leistungsverstärker
in einem separaten Raum (ZONE 3) ausgegeben werden.
HEIGHT 2 PRE OUT-Buchsen: Es kann ein Leistungsverstärker
angeschlossen werden.( p57)
20.ZONE 2 PRE/LINE OUT-Buchsen: Es können Audiosignale über ein analoges
Audiokabel an einen Vorverstärker oder Leistungsverstärker in einem
separaten Raum (ZONE 2) ausgegeben werden.
10
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Fernbedienung
1. STANDBY/ON-Taste
2. Eingangsselektor-Tasten: Wechselt den Eingang, der wiedergegeben werden soll.
3. / -Tasten: Wählen Sie den wiederzugebenden Eingang aus.
4.
(AV ADJUST)-Taste: Einstellungen wie "Tone" und "Level" können während der
Wiedergabe rasch auf dem Fernsehbildschirm vorgenommen werden. ( p147)
5. Cursortasten und ENTER-Taste: Wählen Sie das Element mit den Cursortasten aus und drücken
Sie ENTER, um Ihre Auswahl zu bestätigen. Wenn die Ordner oder Dateilisten nicht auf einen
Bildschirm des Fernsehers passen, können Sie / drücken, um den Bildschirm zu wechseln.
6. -Taste: Zeigt das Home-Bild an. ( p117, 138, 143)
7. Lautstärketasten
8. -Taste: Schaltet den Ton vorübergehend aus. Drücken Sie die Taste erneut,
um die Stummschaltung aufzuheben.
9. LISTENING MODE-Tasten: Hiermit kann der Wiedergabemodus ausgewählt werden. ( p103)
MAIN/ZONE 2/ZONE 3-Tasten: Hiermit wird die Multizonenfunktion gesteuert.
( p98)
10.Wiedergabetasten: Verwendet für Wiedergabevorgänge bei Wiedergabe mit
dem Music Server ( p86) oder USB-Gerät ( p83).
11.
-Taste: Verwendet für Wiederholungs- oder die Zufallswiedergabe mit
dem Music Server ( p86) oder USB-Gerät ( p83). Jedes Mal wenn
Sie die Taste drücken, wechselt der Modus von
(Wiederholung eines
Tracks), zu
(Wiederholung des Ordners), zu
(zufällig).
CLEAR-Taste: Hiermit werden bei der Texteingabe auf dem Fernsehbildschirm
alle Zeichen gelöscht.
12. -Taste: Wechselt die Information auf dem Display und wird zur Bedienung von RDS verwendet ( p97).
13. -Taste: Hiermit wird die vorige Anzeige wiederhergestellt.
14.MODE-Taste: Dient zum Umschalten zwischen der automatischen und manuellen
Sendersuche für AM/FM-Sender ( p93) oder der Multizonenfunktion ( p98).
15.+Fav-Taste: Hiermit können Sie AM-/FM-Radiosender registrieren. ( p95)
Wenn die Fernbedienung nicht funktioniert: Die
Tipps
Fernbedienung wurde möglicherweise in den Modus
für ZONE-Steuerung geschaltet. Halten Sie MODE
gedrückt und drücken Sie die Taste MAIN mindestens
3 Sekunden lang, bis die Fernbedienungsanzeige
einmal blinkt, und schalten Sie dann auf den
Steuermodus für den Hauptraum um.
1
2
3
4
bm
5
6
bn
7
8
9
bk
bl
bo
bp
11
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Verbindungen
Anschließen der Lautsprecher
13
Anschließen des Fernsehers
59
Anschließen von Wiedergabegeräten
62
Anschließen einer AV-Komponente in einem
separaten Raum (Multi-Zonen-Verbindung)
66
Anschließen von Antennen
69
Netzwerkverbindung70
Anschluss von externen Steuergeräten
71
Anschließen des Netzkabels
73
12
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Anschließen der Lautsprecher
Sie können das Layout der zu installierenden Lautsprecher unter verschiedenen Mustern auswählen, wenn Sie dieses Gerät verwenden. Verwenden Sie das folgende
Flussdiagramm, um die Lautsprecherkonfiguration auszuwählen, die zu Ihren Lautsprechern und Ihrer Nutzungsumgebung passt. Sie können Anschlussmethode und
Standardeinstellungen prüfen. Dolby Atmos ( p106) Wiedergabemodus reproduziert getreu das im Dolby Atmos-Audioformat aufgezeichnete Sounddesign, indem
Surround-Back-Lautsprecher oder Höhenlautsprecher installiert werden. Dolby Atmos ermöglicht ein präzises freies Platzieren von Klangobjekten im dreidimensionalen
Raum. So lässt sich ein besonders klarer Klang erzielen.
Genießen Sie Sound mit Dolby Atmos?
Ja
„„Bei Verwendung von SurroundBack-Lautsprechern
•7.1-Kanalsystem ( p45)
•7.1-Kanalsystem + ZONE
SPEAKER ( p46)
•7.1-Kanalsystem (Bi-Amping der
Lautsprecher) ( p47)
Nein
„„Bei Verwendung von 1 Satz von
Höhenlautsprechern
•5.1.2-Kanalsystem ( p48)
•5.1.2-Kanalsystem + ZONE
SPEAKER ( p49)
•5.1.2-Kanalsystem (Bi-Amping der
Lautsprecher) ( p50)
•7.1.2-Kanalsystem ( p51)
•7.1.2-Kanalsystem + ZONE
SPEAKER ( p52)
„„Bei Verwendung von 2 Sätzen von
Höhenlautsprechern
•5.1.4-Kanalsystem ( p53)
•5.1.4-Kanalsystem + ZONE
SPEAKER ( p54)
•7.1.4-Kanalsystem ( p55)
•7.1.4-Kanalsystem + ZONE
SPEAKER ( p56)
13
•5.1-Kanalsystem ( p42)
•5.1-Kanalsystem + ZONE
SPEAKER ( p43)
•5.1-Kanalsystem (Bi-Amping der
Lautsprecher) ( p44)
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Lautsprecherinstallation
„„ 5.1-Kanalsystem
2
3
6
Dies ist ein grundlegendes 5.1-Kanalsystem. Über die Frontlautsprecher wird
Front-Stereoklang ausgegeben, und ein Center-Lautsprecher gibt den Ton aus
der Bildmitte wie Dialoge und Gesang aus. Die Surround-Lautsprecher erzeugen
das hintere Klangfeld. Der aktive Subwoofer gibt Bassklänge wieder und erzeugt
das volle Klangfeld.
Frontlautsprecher sollten in Kopfhöhe, Surround-Lautsprecher etwas höher
platziert werden. Der Center-Lautsprecher sollte der Hörposition zugewandt in
einem Winkel platziert werden. Wird der aktive Subwoofer zwischen CenterLautsprecher und dem Frontlautsprecher platziert, so ergibt sich auch bei
Wiedergabe von Musikquellen ein natürlicher Klang.
1
1,2Front-Lautsprecher
3Center-Lautsprecher
4,5Surround-Lautsprecher
6 Aktiver Subwoofer
*1
*2
5
4
*1: 22° bis 30°, *2: 120°
14
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 7.1-Kanalsystem
3
2
6
Dies ist ein 7.1-Kanalsystem, das aus dem grundlegenden 5.1-Kanalsystem
( p14) und zusätzlichen Surround-Back-Lautsprechern besteht. Über
die Frontlautsprecher wird Front-Stereoklang ausgegeben, und ein CenterLautsprecher gibt den Ton aus der Bildmitte wie Dialoge und Gesang aus. Die
Surround-Lautsprecher erzeugen das hintere Klangfeld. Der aktive Subwoofer
gibt Bassklänge wieder und erzeugt das volle Klangfeld. Surround-BackLautsprecher erhöhen den Eindruck des klanglichen Umschlossenseins durch
das Back-Klangfeld und bieten ein realistischeres Klangfeld wird. Wenn Sie
Dolby Atmos als Eingabeformat verwenden, können Sie bei Installation von
Surround-Back-Lautsprechern den Dolby Atmos-Wiedergabemodus wählen, der
den aktuellsten 3D-Sound ermöglicht.
Frontlautsprecher sollten in Kopfhöhe, Surround-Lautsprecher etwas höher
platziert werden. Der Center-Lautsprecher sollte der Hörposition zugewandt in
einem Winkel platziert werden. Wird der aktive Subwoofer zwischen CenterLautsprecher und dem Frontlautsprecher platziert, so ergibt sich auch bei
Wiedergabe von Musikquellen ein natürlicher Klang. Die Surround-BackLautsprecher sollten in Kopfhöhe platziert werden.
• Wenn Surround-Back-Lautsprecher installiert sind, sollten Sie auch SurroundLautsprecher installieren.
1
*1
*2
5
4
*3
8
7
1,2Front-Lautsprecher
3Center-Lautsprecher
4,5Surround-Lautsprecher
6 Aktiver Subwoofer
7,8Surround-Back-Lautsprecher
*1: 22° bis 30°, *2: 90° bis 110°, *3: 135° bis 150°
15
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 5.1.2-Kanalsystem
Ein 5.1.2-Kanalsystem ist eine Lautsprecherkonfiguration, die aus dem grundlegenden 5.1-Kanalsystem ( p14) und zusätzlichen Höhenlautsprechern besteht.
Wählen Sie die Höhenlautsprecher, die zu Ihren Lautsprechern und Ihrer Nutzungsumgebung passen, unter den folgenden drei Typen aus.
❏❏ Front-Höhenlautsprecher/
Rückhöhenlautsprecher Installationsbeispiel
( p17)
❏❏ Deckenlautsprecher Installationsbeispiel
( p18)
❏❏ Dolby-aktivierte Lautsprecher (DolbyLautsprecher) Installationsbeispiel ( p19)
16
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Front-Höhenlautsprecher/
Rückhöhenlautsprecher Installationsbeispiel
8
Dies ist ein 5.1-Kanal-Basissystem ( p14) bestehend aus
Frontlautsprechern, einem Center-Lautsprecher, Surround-Lautsprechern
und einem aktiven Subwoofer, sowie zusätzlichen kombinierten FrontHöhenlautsprechern oder Rückhöhenlautsprechern. Wenn Sie Dolby
Atmos als Eingabeformat verwenden, können Sie bei Installation solcher
Höhenlautsprecher den Dolby Atmos-Wiedergabemodus wählen, der den
aktuellsten 3D-Sound einschließlich Klangfeld über Hörposition ermöglicht.
Front- bzw. Rückhöhenlautsprecher sollten mindestens 3´/0,9 m höher als die
Frontlautsprecher installiert werden.
Die Front-Höhenlautsprecher sollten direkt über den Frontlautsprechern installiert
werden, und der Abstand zwischen den Rückhöhenlautsprechern sollte dem
Abstand zwischen den Frontlautsprechern entsprechen. In beiden Fällen sollten
die Lautsprecher der Hörposition zugewandt in einem Winkel platziert werden.
7
3´ (0,9 m)
oder mehr
*1
7,8Höhenlautsprecher
Wählen Sie eine der folgenden Optionen aus:
• Front-Höhenlautsprecher
• Rückhöhenlautsprecher
*2
8
*1: 22° bis 30°, *2: 120°
7
3´ (0,9 m)
oder mehr
17
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Deckenlautsprecher Installationsbeispiel
8
7
8
7
Dies ist ein 5.1-Kanal-Basissystem ( p14) bestehend aus Frontlautsprechern,
einem Center-Lautsprecher, Surround-Lautsprechern und einem aktiven
Subwoofer, sowie zusätzlichen kombinierten oberen Frontlautsprechern,
oberen Mittellautsprechern oder oberen Rücklautsprechern. Wenn Sie Dolby
Atmos als Eingabeformat verwenden, können Sie bei Installation solcher
Höhenlautsprecher den Dolby Atmos-Wiedergabemodus wählen, der den
aktuellsten 3D-Sound einschließlich Klangfeld über Hörposition ermöglicht.
Installieren Sie die oberen Frontlautsprecher vor der Hörposition an der Decke,
die oberen Mittellautsprecher direkt über der Hörposition und die oberen
Rücklautsprecher hinter der Hörposition. Der Abstand zwischen jedem Paar sollte
mit dem Abstand zwischen den Frontlautsprechern übereinstimmen.
• Dolby Laboratories empfiehlt die Konfigurationen dieser Typen von
Höhenlautsprechern, um den besten Dolby Atmos-Effekt zu erzielen.
8
7
*3
*2
7,8Höhenlautsprecher
Wählen Sie eine der folgenden Optionen aus:
• Obere Frontlautsprecher
• Obere Mittellautsprecher
• Obere Rücklautsprecher
*1
*1: 30° bis 55°, *2: 65° bis 100°, *3: 125° bis 150°
18
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Dolby-aktivierte Lautsprecher (DolbyLautsprecher) Installationsbeispiel
8
Dies ist ein 5.1-Kanal-Basissystem ( p14) bestehend aus
Frontlautsprechern, einem Center-Lautsprecher, Surround-Lautsprechern und
einem aktiven Subwoofer, sowie zusätzlichen Dolby-aktivierten Lautsprechern
(Front) oder Dolby-aktivierten Lautsprechern (Surround) in Kombination. Dolbyaktivierte Lautsprecher sind spezielle Lautsprecher, deren Klangausgabe in
Richtung Decke erfolgt, sodass der Klang als Overhead-Klang wahrgenommen
wird, indem er von der Decke reflektiert wird. Wenn Sie Dolby Atmos als
Eingabeformat verwenden, können Sie bei Installation solcher Höhenlautsprecher
den Dolby Atmos-Wiedergabemodus wählen, der den aktuellsten 3D-Sound
einschließlich Klangfeld über Hörposition ermöglicht.
Installieren Sie sie entweder über den Frontlautsprechern oder über den
Surround-Lautsprechern.
7
7,8Höhenlautsprecher
Wählen Sie eine der folgenden Optionen aus:
• Dolby-aktivierte Lautsprecher (Front)
• Dolby-aktivierte Lautsprecher (Surround)
*1
*2
8
7
*1: 22° bis 30°, *2: 120°
19
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 7.1.2-Kanalsystem
Ein 7.1.2-Kanalsystem ist eine Lautsprecherkonfiguration, die aus dem 7.1-Kanalsystem ( p15) und zusätzlichen Höhenlautsprechern besteht. Wählen Sie die
Höhenlautsprecher, die zu Ihren Lautsprechern und Ihrer Nutzungsumgebung passen, unter den folgenden drei Typen aus.
❏❏ Front-Höhenlautsprecher/
Rückhöhenlautsprecher Installationsbeispiel
( p21)
❏❏ Deckenlautsprecher Installationsbeispiel
( p22)
❏❏ Dolby-aktivierte Lautsprecher (DolbyLautsprecher) Installationsbeispiel ( p23)
20
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Front-Höhenlautsprecher/
Rückhöhenlautsprecher Installationsbeispiel
bk
Dies ist ein 7.1-Kanalsystem ( p15) bestehend aus Frontlautsprechern,
einem Center-Lautsprecher, Surround-Lautsprechern, Surround-BackLautsprechern und einem aktiven Subwoofer, sowie zusätzlichen kombinierten
Front-Höhenlautsprechern oder Rückhöhenlautsprechern. Wenn Sie Dolby
Atmos als Eingabeformat verwenden, können Sie bei Installation solcher
Höhenlautsprecher den Dolby Atmos-Wiedergabemodus wählen, der den
aktuellsten 3D-Sound einschließlich Klangfeld über Hörposition ermöglicht.
Front- bzw. Rückhöhenlautsprecher sollten mindestens 3´/0,9 m höher als die
Frontlautsprecher installiert werden.
Die Front-Höhenlautsprecher sollten direkt über den Frontlautsprechern installiert
werden, und der Abstand zwischen den Rückhöhenlautsprechern sollte dem
Abstand zwischen den Frontlautsprechern entsprechen. In beiden Fällen sollten
die Lautsprecher der Hörposition zugewandt in einem Winkel platziert werden.
9
3´ (0,9 m)
oder mehr
*1
9,10Höhenlautsprecher
Wählen Sie eine der folgenden Optionen aus:
• Front-Höhenlautsprecher
• Rückhöhenlautsprecher
*2
bk
*3
*1: 22° bis 30°, *2: 90° bis 110°, *3: 135° bis 150°
9
3´ (0,9 m)
oder mehr
21
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Deckenlautsprecher Installationsbeispiel
bk
9
bk
9
Dies ist ein 7.1-Kanalsystem ( p15) bestehend aus Frontlautsprechern,
einem Center-Lautsprecher, Surround-Lautsprechern, Surround-BackLautsprechern und einem aktiven Subwoofer, sowie zusätzlichen
kombinierten oberen Frontlautsprechern, oberen Mittellautsprechern oder
oberen Rücklautsprechern. Wenn Sie Dolby Atmos als Eingabeformat
verwenden, können Sie bei Installation solcher Höhenlautsprecher den
Dolby Atmos-Wiedergabemodus wählen, der den aktuellsten 3D-Sound
einschließlich Klangfeld über Hörposition ermöglicht. Installieren Sie die
oberen Frontlautsprecher vor der Hörposition an der Decke, die oberen
Mittellautsprecher direkt über der Hörposition und die oberen Rücklautsprecher
hinter der Hörposition. Der Abstand zwischen jedem Paar sollte mit dem Abstand
zwischen den Frontlautsprechern übereinstimmen.
• Dolby Laboratories empfiehl die Konfiguratione dieser Typen von
Höhenlautsprechern, um den besten Dolby Atmos-Effek zu erzielen.
bk
9
*3
*2
*1
9,10Höhenlautsprecher
Wählen Sie eine der folgenden Optionen aus:
• Obere Frontlautsprecher
• Obere Mittellautsprecher
• Obere Rücklautsprecher
*1: 30° bis 55°, *2: 65° bis 100°, *3: 125° bis 150°
22
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Dolby-aktivierte Lautsprecher (DolbyLautsprecher) Installationsbeispiel
bk
Dies ist ein 7.1-Kanalsystem ( p15) bestehend aus Frontlautsprechern,
einem Center-Lautsprecher, Surround-Lautsprechern, Surround-BackLautsprechern und einem aktiven Subwoofer, sowie zusätzlichen kombinierten
Dolby-aktivierten Lautsprechern (Front), Dolby-aktivierten Lautsprechern
(Surround) oder Dolby-aktivierten Lautsprechern (Surround Back). Dolbyaktivierte Lautsprecher sind spezielle Lautsprecher, deren Klangausgabe in
Richtung Decke erfolgt, sodass der Klang als Overhead-Klang wahrgenommen
wird, indem er von der Decke reflektier wird. Wenn Sie Dolby Atmos als
Eingabeformat verwenden, können Sie bei Installation solcher Höhenlautsprecher
den Dolby Atmos-Wiedergabemodus wählen, der den aktuellsten 3D-Sound
einschließlich Klangfeld über Hörposition ermöglicht.
Bringen Sie sie entweder an den Frontlautsprechern, an den SurroundLautsprechern oder an den Surround-Back-Lautsprechern an.
9
*1
*2
bk
9,10Höhenlautsprecher
Wählen Sie eine der folgenden Optionen aus:
• Dolby-aktivierte Lautsprecher (Front)
• Dolby-aktivierte Lautsprecher (Surround)
• Dolby-aktivierte Lautsprecher (Surround Back)
9
*3
bk
9
*1: 22° bis 30°, *2: 90° bis 110°, *3: 135° bis 150°
23
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 5.1.4-Kanalsystem
Ein 5.1.4-Kanalsystem ist eine Lautsprecherkonfiguration, bestehend aus einer Kombination von 2 Sätzen von Höhenlautsprechern, 1 Satz von linken und
rechten Frontlautsprechern und 1 Satz von linken und rechten Rücklautsprechern mit dem grundlegenden 5.1-Kanalsystem ( p14). Durch Installieren der
Höhenlautsprecher wird dem Dolby Atmos Hörmodus ermöglicht, den neuesten 3D-Klang zu verwirklichen, einschließlich des Overhead-Raums mit Eingabe im Dolby
Atmos-Format. Eine Kombination von 2 Höhenlautsprechern kann unter den Folgenden gewählt werden.
❏❏ Kombinationsbeispiel, wenn obere
Frontlautsprecher vorne verwendet werden
( p25)
❏❏ Kombinationsbeispiel, wenn obere
Mittellautsprecher vorne verwendet werden
( p27)
❏❏ Kombinationsbeispiel, wenn FrontHöhenlautsprecher vorne verwendet werden
( p28)
❏❏ Kombinationsbeispiel, wenn Dolby-aktivierte
Lautsprecher (Front) verwendet werden
( p30)
24
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Kombinationsbeispiel, wenn obere
Frontlautsprecher vorne verwendet werden
(Beispiel 1) Obere Rücklautsprecher hinten verwenden
8
7
Über obere Frontlautsprecher
8
bk
9
*2
7
*2: 125° bis 150°
Die oberen Rücklautsprecher werden an der Decke hinter der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern ist
optimal an den für die Frontlautsprecher angepasst.
*1
9,10 Obere Rücklautsprecher
(Beispiel 2) Rückhöhenlautsprecher hinten verwenden
bk
87
9
3´ (0,9 m)
oder mehr
*1: 30° bis 55°
Die oberen Frontlautsprecher werden an der Decke vor der Hörposition installiert,
und der Abstand zwischen den linken und rechten Lautsprechern ist optimal
an den für die Frontlautsprecher angepasst. Wenn die obere Frontlautsprecher
vorne verwendet werden, kann die Kombination der Höhenlautsprecher, die
hinten verwendet werden können, unter den folgenden 3 rechts gezeigten
Beispielen ausgewählt werden.
Der Abstand zwischen den Rückhöhenlautsprechern sollte dem der
Frontlautsprecher entsprechen, und sie sollten mindestens 3’/0,9 m höher als die
Frontlautsprecher installiert und geneigt werden, so dass sie zum Hörer weisen.
7,8 Obere Frontlautsprecher
9,10Rückhöhenlautsprecher
25
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
(Beispiel 3) Dolby-aktivierte Lautsprecher (Surround) verwenden
8
bk
7
9
Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexion von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround) werden über den SurroundLautsprechern installiert.
9,10 Dolby-aktivierte Lautsprecher (Surround)
26
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Kombinationsbeispiel, wenn obere
Mittellautsprecher vorne verwendet werden
Rückhöhenlautsprecher hinten verwenden
bk
Über obere Mittellautsprecher
87
8
7
9
3´ (0,9 m)
oder mehr
Der Abstand zwischen den Rückhöhenlautsprechern sollte dem der
Frontlautsprecher entsprechen, und sie sollten mindestens 3’/0,9 m höher als die
Frontlautsprecher installiert und geneigt werden, so dass sie zum Hörer weisen.
*1
9,10Rückhöhenlautsprecher
*1: 65° bis 100°
Die oberen Mittellautsprecher werden an der Decke direkt über der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern
ist optimal an den für die Frontlautsprecher angepasst. Wenn die oberen
Mittellautsprecher vorne verwendet werden, können die Rückhöhenlautsprecher
rechts hinten verwendet werden.
7,8 Obere Mittellautsprecher
27
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Kombinationsbeispiel, wenn FrontHöhenlautsprecher vorne verwendet werden
(Beispiel 1) Rückhöhenlautsprecher hinten verwenden


Über die Front-Höhenlautsprecher
8


3´ (0,9 m)
oder mehr
7
Der Abstand zwischen den Rückhöhenlautsprechern sollte dem der
Frontlautsprecher entsprechen, und sie sollten mindestens 3’/0,9 m höher als die
Frontlautsprecher installiert und geneigt werden, so dass sie zum Hörer weisen.
3´ (0,9 m)
oder mehr
9,10Rückhöhenlautsprecher
*1
(Beispiel 2) Obere Mittellautsprecher hinten verwenden
*2



*3
*1: 22° bis 30°, *2: 120°
Installieren Sie die Front-Höhenlautsprecher direkt über den Frontlautsprechern
mindestens 3’/0,9 m höher und geneigt, so dass sie zum Hörer weisen. Wenn
die Front-Höhenlautsprecher vorne verwendet werden, kann die Kombination der
Höhenlautsprecher, die hinten verwendet werden können, unter den folgenden 4
rechts gezeigten Beispielen ausgewählt werden.
*3: 65° bis 100°
Die oberen Mittellautsprecher werden an der Decke direkt über der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern ist
optimal an den für die Frontlautsprecher angepasst.
7,8Front-Höhenlautsprecher
9,10 Obere Mittellautsprecher
28
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
(Beispiel 3) Obere Rücklautsprecher hinten verwenden



*4
*4: 125° bis 150°
Die oberen Rücklautsprecher werden an der Decke hinter der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern ist
optimal an den für die Frontlautsprecher angepasst.
9,10 Obere Rücklautsprecher
(Beispiel 4) Dolby-aktivierte Lautsprecher (Surround) verwenden




Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexion von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround) werden über den SurroundLautsprechern installiert.
9,10 Dolby-aktivierte Lautsprecher (Surround)
29
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Kombinationsbeispiel, wenn Dolby-aktivierte
Lautsprecher (Front) verwendet werden
(Beispiel 1) Obere Rücklautsprecher hinten verwenden
bk
9
Über die Dolby-aktivierten Lautsprecher (Front)
*3
78
8
7
*3: 125° bis 150°
Die oberen Rücklautsprecher werden an der Decke hinter der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern ist
optimal an den für die Frontlautsprecher angepasst.
9,10 Obere Rücklautsprecher
*1
(Beispiel 2) Rückhöhenlautsprecher hinten verwenden
*2
bk
8
9
7
3´ (0,9 m)
oder mehr
*1: 22° bis 30°, *2: 120°
Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexion von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Front) werden über den Frontlautsprechern
installiert. Wenn die Dolby-aktivierten Lautsprecher (Front) verwendet werden,
kann die Kombination der Höhenlautsprecher, die hinten verwendet werden
können, unter den folgenden 3 rechts gezeigten Beispielen ausgewählt werden.
Der Abstand zwischen den Rückhöhenlautsprechern sollte dem der
Frontlautsprecher entsprechen, und sie sollten mindestens 3’/0,9 m höher als die
Frontlautsprecher installiert und geneigt werden, so dass sie zum Hörer weisen.
9,10Rückhöhenlautsprecher
7,8 Dolby-aktivierte Lautsprecher (Front)
30
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
(Beispiel 3) Dolby-aktivierte Lautsprecher (Surround) verwenden
8
bk
7
9
Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexion von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround) werden über den SurroundLautsprechern installiert.
9,10 Dolby-aktivierte Lautsprecher (Surround)
31
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 7.1.4-Kanalsystem
Ein 7.1.4-Kanalsystem ist eine Lautsprecherkonfiguration, bestehend aus einer Kombination von 2 Sätzen von Höhenlautsprechern, 1 Satz von linken und
rechten Frontlautsprechern und 1 Satz von linken und rechten Rücklautsprechern mit dem grundlegenden 7.1-Kanalsystem ( p15). Wenn Sie Dolby Atmos
als Eingabeformat verwenden, können Sie bei Installation der Höhenlautsprecher den Dolby Atmos-Wiedergabemodus wählen, der den aktuellsten 3D-Sound
einschließlich Klangfeld über Hörposition ermöglicht. Eine Kombination von 2 Höhenlautsprechern kann unter den Folgenden gewählt werden.
❏❏ Kombinationsbeispiel, wenn obere
Frontlautsprecher vorne verwendet werden
( p33)
❏❏ Kombinationsbeispiel, wenn obere
Mittellautsprecher vorne verwendet werden
( p35)
❏❏ Kombinationsbeispiel, wenn FrontHöhenlautsprecher vorne verwendet werden
( p36)
❏❏ Kombinationsbeispiel, wenn Dolby-aktivierte
Lautsprecher (Front) verwendet werden
( p38)
32
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Kombinationsbeispiel, wenn obere
Frontlautsprecher vorne verwendet werden
(Beispiel 1) Obere Rücklautsprecher hinten verwenden
bk
9
Über obere Frontlautsprecher
bk
bm
bl
*2
9
*2: 125° bis 150°
Die oberen Rücklautsprecher werden an der Decke hinter der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern ist
optimal an den für die Frontlautsprecher angepasst.
*1
11,12 Obere Rücklautsprecher
(Beispiel 2) Rückhöhenlautsprecher hinten verwenden
bm
bk 9
bl
3´ (0,9 m)
oder mehr
*1: 30° bis 55°
Die oberen Frontlautsprecher werden an der Decke vor der Hörposition installiert,
und der Abstand zwischen den linken und rechten Lautsprechern ist optimal
an den für die Frontlautsprecher angepasst. Wenn die obere Frontlautsprecher
vorne verwendet werden, kann die Kombination der Höhenlautsprecher, die
hinten verwendet werden können, unter den folgenden 4 rechts gezeigten
Beispielen ausgewählt werden.
Der Abstand zwischen den Rückhöhenlautsprechern sollte dem der
Frontlautsprecher entsprechen, und sie sollten mindestens 3’/0,9 m höher als die
Frontlautsprecher installiert und geneigt werden, so dass sie zum Hörer weisen.
9,10 Obere Frontlautsprecher
11,12Rückhöhenlautsprecher
33
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
(Beispiel 3) Dolby-aktivierte Lautsprecher (Surround) verwenden
bk
9
bm
bl
Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexio von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround) werden über den SurroundLautsprechern installiert.
11,12 Dolby-aktivierte Lautsprecher (Surround)
(Beispiel 4) Dolby-aktivierte Lautsprecher (Surround Back) verwenden
bk
bm
9
bl
Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexio von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround Back) werden über den SurroundBack-Lautsprechern installiert.
11,12 Dolby-aktivierte Lautsprecher (Surround Back)
34
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Kombinationsbeispiel, wenn obere
Mittellautsprecher vorne verwendet werden
Rückhöhenlautsprecher hinten verwenden
bm
Über obere Mittellautsprecher
bk 9
bl
bk
9
3´ (0,9 m)
oder mehr
Der Abstand zwischen den Rückhöhenlautsprechern sollte dem der
Frontlautsprecher entsprechen, und sie sollten mindestens 3’/0,9 m höher als die
Frontlautsprecher installiert und geneigt werden, so dass sie zum Hörer weisen.
*1
11,12Rückhöhenlautsprecher
*1: 65° bis 100°
Die oberen Mittellautsprecher werden an der Decke direkt über der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern
ist optimal an den für die Frontlautsprecher angepasst. Wenn die oberen
Mittellautsprecher vorne verwendet werden, können die Rückhöhenlautsprecher
rechts hinten verwendet werden.
9,10 Obere Mittellautsprecher
35
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Kombinationsbeispiel, wenn FrontHöhenlautsprecher vorne verwendet werden
(Beispiel 1) Rückhöhenlautsprecher hinten verwenden


Über die Front-Höhenlautsprecher


3´ (0,9 m)
oder mehr


3´ (0,9 m)
oder mehr
Der Abstand zwischen den Rückhöhenlautsprechern sollte dem der
Frontlautsprecher entsprechen, und sie sollten mindestens 3’/0,9 m höher als die
Frontlautsprecher installiert und geneigt werden, so dass sie zum Hörer weisen.
*1
11,12Rückhöhenlautsprecher
*2
(Beispiel 2) Obere Mittellautsprecher hinten verwenden
*3



*4
*1: 22° bis 30°, *2: 90° bis 110°, *3: 135° bis 150°
Installieren Sie die Front-Höhenlautsprecher direkt über den Frontlautsprechern
mindestens 3’/0,9 m höher und geneigt, so dass sie zum Hörer weisen. Wenn
die Front-Höhenlautsprecher vorne verwendet werden, kann die Kombination der
Höhenlautsprecher, die hinten verwendet werden können, unter den folgenden 5
rechts gezeigten Beispielen ausgewählt werden.
*4: 65° bis 100°
Die oberen Mittellautsprecher werden an der Decke direkt über der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern ist
optimal an den für die Frontlautsprecher angepasst.
9,10Front-Höhenlautsprecher
11,12 Obere Mittellautsprecher
36
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
(Beispiel 3) Obere Rücklautsprecher hinten verwenden
(Beispiel 5) Dolby-aktivierte Lautsprecher (Surround Back) verwenden




*5

*5: 125° bis 150°

Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexio von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround Back) werden über den SurroundBack-Lautsprechern installiert.
Die oberen Rücklautsprecher werden an der Decke hinter der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern ist
optimal an den für die Frontlautsprecher angepasst.
11,12 Obere Rücklautsprecher
11,12 Dolby-aktivierte Lautsprecher (Surround Back)
(Beispiel 4) Dolby-aktivierte Lautsprecher (Surround) verwenden





Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexio von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround) werden über den SurroundLautsprechern installiert.
11,12 Dolby-aktivierte Lautsprecher (Surround)
37
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
❏❏ Kombinationsbeispiel, wenn Dolby-aktivierte
Lautsprecher (Front) verwendet werden
(Beispiel 1) Obere Rücklautsprecher hinten verwenden
bm
bl
Über die Dolby-aktivierten Lautsprecher (Front)
*4
9bk
bk
9
*4: 125° bis 150°
Die oberen Rücklautsprecher werden an der Decke hinter der Hörposition
installiert, und der Abstand zwischen den linken und rechten Lautsprechern ist
optimal an den für die Frontlautsprecher angepasst.
11,12 Obere Rücklautsprecher
*1
(Beispiel 2) Rückhöhenlautsprecher hinten verwenden
*2
bm
bl
*3
bk
9
3´ (0,9 m)
oder mehr
*1: 22° bis 30°, *2: 90° bis 110°, *3: 135° bis 150°
Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexio von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Front) werden über den Frontlautsprechern
installiert. Wenn die Dolby-aktivierten Lautsprecher (Front) verwendet werden,
kann die Kombination der Höhenlautsprecher, die hinten verwendet werden
können, unter den folgenden 4 rechts gezeigten Beispielen ausgewählt werden.
Der Abstand zwischen den Rückhöhenlautsprechern sollte dem der
Frontlautsprecher entsprechen, und sie sollten mindestens 3’/0,9 m höher als die
Frontlautsprecher installiert und geneigt werden, so dass sie zum Hörer weisen.
11,12Rückhöhenlautsprecher
9,10 Dolby-aktivierte Lautsprecher (Front)
38
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
(Beispiel 3) Dolby-aktivierte Lautsprecher (Surround) verwenden
bk
bm
9
bl
Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexio von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround) werden über den SurroundLautsprechern installiert.
11,12 Dolby-aktivierte Lautsprecher (Surround)
(Beispiel 4) Dolby-aktivierte Lautsprecher (Surround Back) verwenden
bk
9
bm
bl
Die Dolby-aktivierten Lautsprecher sind die speziellen Lautsprecher, deren Klang
zur Decke ausgegeben wird, und sie haben die Wirkung, dass der Klang durch
Reflexio von oben von der Decke kommt.
Die Dolby-aktivierten Lautsprecher (Surround Back) werden über den SurroundBack-Lautsprechern installiert.
11,12 Dolby-aktivierte Lautsprecher (Surround Back)
39
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
Einstellungen für Lautsprecheranschlüsse und "Speaker Setup"
Verbindungen
Verbinden Sie die Buchsen des Geräts und der Lautsprecher für jeden Kanal
korrekt miteinander (+ Seite an + Seite und - Seite an - Seite). Wenn der
Anschluss falsch ausgeführt wird, kann die Basswiedergabe aufgrund von
Phasenumkehr beeinträchtigt sein. Verdrillen Sie die freiliegenden Drähte
an der Spitze der angeschlossenen Lautsprecherkabel so, dass die Drähte
beim Anschließen nicht aus der Lautsprecherklemme herausragen. Wenn
die freiliegenden Drähte die Geräterückwand berühren oder das (+)- und das
(–)-Kabel einander berühren, wird die Schutzschaltung aktiviert.
„„(Hinweis) Lautsprecherimpedanz
Schließen Sie Lautsprecher mit einer Impedanz von 4 Ω bis 16 Ω. an. Wenn
einer der anzuschließenden Lautsprecher eine Impedanz von 4 Ω oder mehr und
6 Ω oder weniger hat, ist die Einstellung im Menü "System Setup" erforderlich,
nachdem das Initial Setup ( p155) abgeschlossen wurde. Drücken Sie
auf der Fernbedienung, und stellen Sie im angezeigten Startbildschirm "System
Setup" - "Speaker" - "Configuration" - "Speaker Impedance" auf "4ohms" ein.
„„Schließen Sie die Lautsprecherkabel an
1/2˝
(12 mm)
40
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„Schließen Sie den Subwoofer an
a
a Subwoofer-Kabel
Hier kann ein aktiver Subwoofer mit einem Subwoofer-Kabel an dieses Gerät
angeschlossen werden. Es können bis zu zwei aktive Subwoofer angeschlossen
werden. Es wird von jeder SUBWOOFER PRE OUT-Buchse das gleiche Signal
ausgegeben.
41
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 5.1-Kanalsystem
2
6
5
3
 "Speaker Setup"-Einstellungen
beim Initial Setup ( p156)
1
4
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: No
Dies ist ein grundlegendes 5.1-Kanalsystem. Für Einzelheiten der Lautsprecherkonfiguration "Lautsprecherinstallation"
( p14).
42
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 5.1-Kanalsystem + ZONE SPEAKER
MAIN ROOM
2
6
 "Speaker Setup"-Einstellungen
beim Initial Setup ( p156)
3
1
5
4
ZONE 2
8
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: Zone 2 oder Zone 2/
Zone 3
• Bi-Amp: No
ZONE 3
7
bk
9
MAIN ROOM: Dies ist ein grundlegendes 5.1-Kanalsystem. Für Einzelheiten der Lautsprecherkonfiguration
"Lautsprecherinstallation" ( p14).
ZONE 2/ZONE 3: Sie können 2-Kanal-Audio im separaten Raum (ZONE 2/ZONE 3) genießen, während Sie die
5.1-Kanal-Wiedergabe im Hauptraum ausführen (wo sich dieses Gerät befindet). Die gleiche Quelle kann gleichzeitig im
Hauptraum und ZONE 2/ZONE 3 wiedergegeben werden. Außerdem können in beiden Räumen unterschiedliche Quellen
wiedergegeben werden.
Zur Audioausgabe von einer externen angeschlossenen AV-Komponente in ZONE 3 benötigen Sie ein analoges
Audiokabel. Beachten Sie, dass Ausgabe von ZONE 3 nicht bei der Verbindung mit einem HDMI-Kabel, digitalen
Koaxialkabel oder digitalen optischen Kabel möglich ist.
43
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 5.1-Kanalsystem (Bi-Amping der Lautsprecher)
2
6
5
3
 "Speaker Setup"-Einstellungen
beim Initial Setup ( p156)
1
4
• Speaker Channels: 5.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: Yes
For highfrequency
For lowfrequency
Sie können ein 5.1-Kanalsystem ( p14) konfigurieren, indem Sie Frontlautsprecher anschließen, die eine BiAmping-Verbindung unterstützen. Die Bi-Amping-Verbindung kann die Qualität der niedrigen und hohen Bereiche
verbessern. Stellen Sie sicher, dass die Leitungsbrücke zwischen den Tieftönerbuchsen und den Hochtönerbuchsen der
Frontlautsprecher, die eine Bi-Amping-Verbindung unterstützen, entfernt werden. Entsprechende Informationen finden Sie
auch in der Bedienungsanleitung Ihrer Lautsprecher.
44
Bedienfeld≫ Rückseite≫ Fernbedienung≫
Inhalt ≫ Verbindungen ≫ Wiedergabe ≫ Einrichtung ≫
„„ 7.1-Kanalsystem
2
6
3
 "Speaker Setup"-Einstellungen
beim Initial Setup ( p156)
1
5
4
8
7
• Speaker Channels: 7.1 ch
• Subwoofer: Yes
• Height 1 Speaker: --• Height 2 Speaker: --• Zone Speaker: No
• Bi-Amp: No
Dies ist ein 7.1-Kanalsystem, das aus dem grundlegenden 5.1-Kanalsystem und zusätzlichen Surround-BackLautsprechern besteht.
Für Einzelheiten der Lautsprecherkonfiguration "Lautsprecherinstallation" ( p15).
45
Bedienfe