Whirlpool DDLX 80113 Daily Reference Guide

EN
DAILY REFERENCE
GUIDE
THANK YOU FOR PURCHASING A WHIRLPOOL
PRODUCT
To receive more comprehensive help and support, please
register your product at www‌.‌whirlpool‌.‌eu‌/‌register
WWW
You can download the Safety Instructions and
the Use and Care Guide by visiting our website
docs‌.‌whirlpool‌.‌e u and following the
instructions on the back of this booklet.
Before using the appliance carefully read the Health and Safety guide.
PRODUCT DESCRIPTION
APPLIANCE
1.
1. Worktop
2. Control panel
3. Water tank
4. Door
5. Door handle
6. Door filter (behind door)
7. Bottom filter (behind flap)
8. Adjustable feet (4)
2.
3.
5.
4.
6.
7.
8.
CONTROL PANEL
6.
8.
1. Délicat / Gentle option
2. Séchage + / Dry plus option
3. Programme selector
4. Start/Pause button
5. Départ différé / Start delay
button
6. Antifroissage / Anti-crease
indicator
7. Programme sequence indicator /
Start delay indicators
8. Failure indicators
7.
6ème sens
3h
Filtre de porte
Filtre de socle
Temps séchage
90’
Séchage
6h
0
Prêt à repasser
30’
Antifroissage
Départ
différé
Coton
15’
Séchage +
Vider réservoir
Coton
Prêt à porter
Prêt à ranger
60’
Délicat
Fin de cycle
9h
Synthétique
Prêt à porter
XXL
Expert
Laine
Mix
Prêt à ranger
Prêt à repasser
8Kg
1. 2.
3.
B
4. 5.
1
FIRST TIME USE
BEFORE USING THE DRYER
CHECK DRAIN HOSE AND WATER TANK
Make sure that the drain hose on the back of the dryer is fixed
correctly, either to the dryer’s water tank (see picture), or to your
domestic sewage system (see Installation guide).
2
Also make sure that the water tank is correctly inserted.
EN
DAILY USE
WARNING
See Use and Care Guide for more details on functions /
see last page for information on how to obtain the Use and Care Guide
Make sure that no lighters
or matches remain in the
laundry.
1. LOAD LAUNDRY
Prepare your laundry according to the recommendations in section
HINTS AND TIPS.
Make sure that pockets are empty, fasteners closed and ribbons tied
together.
Open the door and load the laundry. Observe the maximum load
sizes given in the PROGRAMME CHART.
2. CLOSE DOOR
Make sure that no laundry gets stuck between door glass and door
filter.
Close the door so that you can hear it click shut.
3. SET THE DESIRED PROGRAMME
Turn the knob to select the desired programme.
Make sure that the laundry
is not soaked with
flammable liquids.
.
START PROGRAMME
Press the Start/Pause button; the indicator next to the button lights
up. The drying process starts.
The programme duration mainly depends on the load size and on
the humidity level of the laundry.
5. CHANGE THE SETTINGS OF A RUNNING PROGRAMME, IF
NEEDED
To change the settings of a running programme or start delay:
• press Start/Pause to put the running programme on pause
• change your settings
• press Start/Pause again to continue the programme.
6.
RESET A RUNNING PROGRAMME, IF NEEDED
Turn the programme selector to Off/O.
WARNING
Immediately open the door and unload the laundry, so that
eventual heat in the laundry can dissipate.
7.
SWITCH OFF THE DRYER AFTER PROGRAMME END
At the end of the programme, the end indicator lights up in the
programme sequence indicator. Turn the programme selector to
Off/O to switch off the dryer. Open the door and take out your
laundry.
If you do not switch the dryer off after programme end, the dryer
drum rotates from time to time the next 10 minutes after
programme end, to reduce creasing of the laundry. During that
time, the Anti-crease indicator lights up.
The dryer will switch off automatically in about a quarter of an hour
after programme end, to save energy.
Find more information regarding programmes in the PROGRAMME
CHART.
8. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN
BOTTOM FILTER
Refer to section CARE AND MAINTENANCE.
Select options, if needed
If you want to select additional options, press the respective button
- the indicator lights up.
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for
more information.
3
HINTS AND TIPS
Respect the care labels of your laundry; make sure that it is
appropriate for being treated in a dryer.
CARE LABELS
The dots indicate the temperature degree for drying the laundry.
EMPTY ALL POCKETS
Objects like coins or keys can damage your laundry as well as the
drum.
Normal temperature
Reduced temperature
Do not tumble dry
SAVING TIPS
Always dry a full load; this optimizes the relative energy
consumption. The maximum load sizes for the various programmes
are indicated in the programme chart.
To reduce the drying time, make sure that the laundry is spun with
the maximum possible spin speed of the wash programme. This
reduces the moisture content in the laundry.
CONSUMPTION DATA
Data can differ in your home, mainly depending on the moisture
content of the laundry load.
Programme
Load
(Kg)
Spin Speed
(rpm)
Humidity
(%)
Energy consumption
(kWh)
Drying Time (min)
ECO COTTON *
8
4
1000
1000
60
60
4.76
2.55
135
80
ECO COTTON
8
8
800
1400
70
50
5.52
3.96
154
117
COTTON IRON DRY
8
8
8
800
1000
1400
70
60
50
4.38
3.92
3.46
131
112
99
SYNTHETICS CUP‑
BOARD DRY
3.5
1000
40
1.44
46
*Reference programmes for Energy Label / Regulation 392/2012 / EU
Values are based on the default programme setting, with clean door
and bottom filter. For consumer tests, the door filter and bottom
filter need to be cleaned after each cycle.
The energy consumption and drying time may differ from the values
above. They depend on the operation conditions in your home
(such as voltage fluctuation, mixture of textiles, moisture content of
the textiles after spinning, load volume).
The values are determined according to European Norm 61121 and
refer to the default programme setting; changing the setting also
impacts the consumption data.
Power Consumption - Watts
Left-on mode
Off-mode
4
0.81
0.07
EN
PROGRAMME CHART
Programme
Options
Care labels
Max load
Délicat /
Gentle
Séchage + /
Dry plus
Prêt à porter / Extra dry
Coton / Cotton
Prêt à ranger / Cupboard dry
max
Prêt à repasser / Iron dry
Eco Coton
/ Eco Cotton
max
Prêt à porter / Extra dry
Synthétique / Synthetics
Prêt à ranger / Cupboard dry
3.5
Prêt à repasser / Iron dry
Mix / Mixed
3.0
Expert Laine / Wool finish 1.0
—
—
XXL / Big items
3.0
—
—
Temps séchage / Drying time
max
—
—
Selectable / Optional
— Not Selectable / Applicable
Maximum load sizes: 8 kg
5
PROGRAMMES
Make sure that your laundry is suitable to be treated in a tumble
dryer. Refer to HINTS AND TIPS / Care labels.
MIX / MIXED
For drying mixed laundry loads made of cotton, linen, synthetic
fibres and their blends.
ECO coton / ECO COTTON
For drying normally wet cotton laundry.
Standard cotton programme, suitable to dry normal wet cotton
laundry. Most efficient programme in terms of energy consumption
for drying cotton laundry.
The values on the Energy Label are based on this programme.
EXPERT LAINE / WOOL FINISH
For finishing the air-drying process of woolen textiles. Woolens get
fluffy and smooth.
COTON / COTTON
For drying cotton laundry.
SYNTHÉTIQUE / SYNTHETICS
For drying laundry made of synthetic fibres.
XXL / BIG ITEMS
For drying big laundry items, such as sleeping bags, blankets etc.
TEMPS SÉCHAGE / DRYING TIME
Time-restricted drying programme. Select programme duration of
15, 30, 60 or 90 minutes.
For all fabrics appropriate for tumble drying. Also suitable to add an
additional short 15 minutes drying phase after programme end.
OPTIONS, FUNCTIONS AND INDICATORS
Refer to the programme chart to check which options are available for
the selected programme.
OPTIONS
Délicat / Gentle
Enables a more gentle treatment of the laundry by reducing
the drying temperature.
Failure indicators:
Vider réservoir / Water tank
(=> empty water tank)
Filtre de socle / Bottom filter
(=> clean bottom filter).
Séchage + / Dry plus
Increases the dryness level of your laundry.
Filtre de porte / Door filter
(=> clean door filter)
FUNCTIONS
In case of any failures, refer to section
TROUBLESHOOTING in the USE AND CARE GUIDE.
Départ différé / Start delay
Moves the start of your programme to a later time.
Choose a delay of 3, 6 or 9 hours.
• Select programme and options.
• Press the Start delay button repeatedly until the desired
delay time indicator lights up.
• Press Start / Pause - the countdown of the delay time
starts. The start delay indicator blinks and the Start / Pause
button lights up. A sound by activation of the pump may
occur.
• After the delay has expired, the dryer starts automatically.
To cancel the Start delay
• Turn the programme selector to the Off/O position, or to
another programme.
6
INDICATORS
Programme sequence indicator
Shows the current programme phase (sensing / drying
process / programme end).
6ème sens
3h
Séchage
6h
Fin de cycle
9h
0
Start delay indicators
Indicate the selected delay until programme start.
Antifroissage / Anticrease
Indicates that the dryer is in the tumbling phase after
programme end, to avoid creasing of the laundry (refer to
DAILY USE / 7.
EN
CARE AND MAINTENANCE
WARNING
Switch off and unplug the
dryer before doing any
cleaning and maintenance.
EMPTY WATER TANK AFTER EACH DRYING CYCLE
Hold the handle and carefully pull out the water tank. Hold the full
water tank with both hands.
Empty the water and insert the container by pushing it back into
place. Make sure that it is properly inserted.
CLEAN DOOR FILTER AFTER EACH DRYING CYCLE
Open the door and remove the door filter by pulling it upwards.
Press the button to open the door filter. Remove the lint inside.
Close the filter and reinsert it in the right direction, so that it
completely integrates in the filter chamber.
Caution, the water in the
water tank can still be hot.
CLEAN THE BOTTOM FILTER ABOUT EVERY TWO MONTHS
Open the bottom flap. Turn the locking bars right and left on the
bottom filter downwards in horizontal position. Hold the bottom
filter on the handle and pull it out.
Clean the bottom filter under running water; wipe away dust and
lint.
Clean the filter chamber of the dryer with a damp cloth or carefully
with a vacuum cleaner. Insert the bottom filter again. Turn the
locking bars upwards in vertical position. Close the bottom flap.
7
HOW TO OBTAIN THE USE AND CARE GUIDE
> WWW Download the Use and Care Guide from our
website docs‌.‌whirlpool‌.‌e u (you can use this QR code),
specifying the product’s commercial code.
> Alternatively, contact our Client After‑sales Service
CONTACTING OUR AFTER‑SALES
SERVICE
You can find our contact details in the
warranty manual. When contacting our
Client After‑sales Service, please state the
codes provided on your product’s
identification plate.
xxxxxxxxxxxx
PRODUCT FICHE
WWW The product fiche with energy data of this appliance can be
downloaded from Whirlpool Website docs‌.‌w hirlpool‌.‌e u
4 0 0 0 1 1 046843
Printed in Italy
8