EN
Quick guide
THANK YOU FOR BUYING A BAUKNECHT PRODUCT
In order to receive a more complete assistance, please
register your product on www.bauknecht.eu/register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally filled
appliance. Position the antibacterial anti-odour filter in the fan as
demonstrated in the filter packaging (if available). If the audible signal
sounds, it means that the temperture alarm has intervened: press the
button to switch off the acoustic alarms.
CONTROL PANEL
1.
5.
3.
4.
1.
2.
3.
4.
5.
6.
6.
2.
PROFRESH
The appliance is automatically able to quickly reach the optimal
internal preservation temperature. The function enables to control also
the humidity of the appliance. In order for it to function correctly, the
fan must also be turned on. It is possible to turn the function on/off
(see Fan description).
FAN*
You can turn the Fan on/off by pressing the button on the base (as
shown in the figure). If the ambient temperature exceeds
27°C, or if drops of water are present on the glass shelves,
it is essential that the fan is on to ensure the proper
preservation of the food. Deactivation of the fan allows
energy consumption to be optimised.
ANTIBACTERIAL FILTER*
Remove it from the box placed in the Fruit and vegetable drawer and
insert into the cover of fan. The replacement procedure is included in
the filter box.
ON/STAND-BY
In Stand-by mode, two dashes light up on the display and the
light in the refrigerator compartment does not turn on.
Note: this does not disconnect the appliance from the power supply.
TEMPERATURE DISPLAY
The display may alternately show the refrigerator compartment
temperature (between 2°C and 8° C) or the temperature of the freezer
compartment (between -16°C and -24°C).
ECO NIGHT FUNCTION
The Eco night function enables the appliance’s energy
consumption to be concentrated in the hours that correspond to
the cheapest electricity tariff (generally at night), when electricity is
freely available and costs less compared to daytime (only in countries
that utilize a multi-tariff system based on time of day - check your
energy tariff with your local electricity utility company). To activate
the function, press the button at the time the cheap tariff begins
(depending on your specific tariff). For example, if the cheap rate
begins at 8 pm, press the button at that time. When the Eco night LED
is ON, the function is active. Once the function has been activated, the
* Available only on certain models
Temperature Display
Freezer temperature - Fast freeze
Turning off the sound alarm - Child Lock
On/stand-by
Refrigerator temperature
EcoNight
appliance automatically adapts energy consumption based on the time
selected, i.e. consuming less energy during the day than at night.
IMPORTANT: To operate properly, the function must be active during
both night and day. The function remains active until deactivated (or it
deactivates in the event of a blackout or appliance switch-off).
To deactivate the function, press the button again. When the Eco night
LED is OFF, the function is not active.
Note: the appliance’s declared energy consumption refers to operation
with the Eco night function deactivated.
TURNING OFF THE SOUND ALARM
To turn off the sound alarm, briefly press the
button.
"CHILD LOCK"
The “Child Lock” can be activated/deactivated by keeping the
“Alarm” button pressed for 3 seconds, until a confirmation sound is
heard (the icon lights up).
If you press any button while the “Child Lock” is active, you will hear a
sound and the “Child Lock” icon will flash.
R EFRIGERATOR COMPARTMENT TEMPERATURE
button.
It is possible to set a different temperature with the “Fridge”
FREEZER COMPARTMENT TEMPERATURE
It is possible to set a different temperature with the “Freezer”
button.
FAST FREEZE
Press the “Freezer” button for 3 seconds 24 hours before
putting large quantities of food to freeze in the freezer compartment.
.
When the function is turned on the icon lights up
The function turns off automatically after 48 hours, or manually by
pressing the “Freezer” button again for 3 seconds.
Note: avoid a direct contact between the fresh food and the food that is
already frozen. To optimise the freezing speed, drawers can be removed
and the food can be placed directly on the bottom of the compartment.
“0° ZONE” COMPARTMENT*
The “0° ZONE” compartment is specifically designed to maintain a low
temperature and the correct humidity to preserve fresh food for longer
(for example, meat, fish, fruits and winter vegetables).
TURNING ON AND TURNING OFF THE COMPARTMENT
The internal temperature of the compartment is approximately 0°
when the compartment is turned on.
To turn on the compartment, press the button (1) for more than one
second until the symbol (2) lights up. The lit symbol (2) means that the
compartment is working. Press the button (1) again for more than one
second to turn off the compartment. The temperature inside depends
on the general temperature of the refrigerator.
1
.
.
2
REMOVING THE “0° ZONE“ COMPARTMENT
Carry out the following steps:
1. To make it easier to remove the compartment, we recommend
that you empty (and possibly remove) the lower door shelves.
2. Remove the compartment by rotating it upwards.
3. Remove the white plastic shelf under the compartment.
Note: it is not possible to remove the upper shelf and side supports.
To use the “0° ZONE“ compartment again, carefully reposition the
white plastic shelf under the compartment before inserting the drawer
and turning the function back on.
Humidity control technology coupled with Active0 provides the best
food preservation when the food is not completely packed.
For the correct functioning of the “0° ZONE” compartment, it is
necessary that:
• the fridge temperature is between +2°C and +6°C;
• the “0° ZONE” compartment is turned on
• Vacation Mode and Stand by are not selected
Note:
-- if the symbol does not light up when you turn on the compartment,
check that the drawer is properly inserted; if the problem persists
contact the authorised Technical Assistance Service;
-- when the “0° ZONE” compartment is inserted in the appliance you
may hear a faint noise, which you should consider as normal;
Important: be careful when positioning food and containers that are
small in size on the upper shelf of the “0° ZONE“ compartment in order
to prevent them accidentally falling between the shelf and the back
wall of the refrigerator compartment.
To have a larger refrigerator volume and to reduce energy
consumption, it is recommended to remove the “0° ZONE“
compartment.
Clean the compartment and its components occasionally using a cloth
and a solution of warm water (taking care not to submerge the white
plastic shelf under the drawer) and neutral cleaning agents specifically
for cleaning the inside of the refrigerator. Do not use abrasive cleaning
agents.
Before cleaning the compartment (also externally) it is necessary
to remove the drawer to disconnect the electrical supply.
HOW TO STORE FOOD AND BEVERAGE
Legend
TEMPERATURE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST AREA
Suggested for storage of cold cuts, desserts, meat and
fish
FRUIT & VEGETABLE DRAWER
FREEZER DRAWERS
FREEZING ZONE DRAWER
(Max cool zone)
Suggested to freeze fresh/cooked food
* Available only on certain models
TROUBLESHOOTING
What to do if...
Possible reasons
Solutions
The control panel is
switched off, the appliance
does not work.
The appliance may be in On/Stand‑by
mode.
There may be an appliance power
supply problem.
Turn the appliance on pressing the On/Stand-by button. Check that:
• there is not a power outage;
• the plug is properly inserted in the power socket and the mains
double-pole switch (if present) is in the correct position (i.e. allows
the appliance to be powered);
• the household electrical system protection devices are efficient;
• the power cable is not damaged.
The inside light does not
work.
The light may need to be replace.
Models with LED lights: contact the authorised Technical Assistance
Service.
The appliance may be in On/Stand‑by
mode.
Turn the appliance on pressing the On/Stand-by button.
The temperature inside the
compartments is not low
enough.
There could be various causes (see
“Solutions”).
Check that:
• the doors close properly;
• the appliance is not installed near a heat source;
• the set temperature is adequate;
• the circulation of air through the ventilation of the appliance is
ensured.
There is water on the
bottom of the refrigerator
compartment.
The defrost water drain is blocked.
Clean the defrosting water drain (see section “Cleaning and
Maintenance").
The front edge of the
This is not a defect. It prevents
appliance, at the door striker condensation from forming.
seal, is hot.
No solution is necessary.
icon is flashing
The red
and a sound signal is
activated
Door open alarm
It is activated when the refrigerator and/
or freezer compartments door remains
open for a prolonged period of time.
To turn the sound signal off, close the open door of the product.
icon is flashing,
The red
a sound signal is activated
icon is
and the
activated.
Blackout alarm
This activates when there is a prolonged
interruption to the power supply which
has caused an increase in temperature
in the freezer compartment.
Note: until the blackout alarm is
deactivated, you cannot set a different
temperature for the product.
Before turning off the sound signal, it is recommended that you pay
attention to the temperature shown on the temperature display,
corresponding to the highest temperature reached in the freezer
compartment during the power cut. To turn the sound signal off,
briefly press the “Turn off sound alarm” button.
After pressing the button, the temperature display will again show
the temperature set. If the freezer compartment has not yet reached
the optimal temperature for the preservation of the food, the
freezer compartment temperature alarm may activate (see freezer
compartment temperature alarm). Check the condition of the food
before consuming it.
icon is lit up
The red
(without flashing), a sound
signal is activated and the
freezer temperature display
is flashing.
Freezer compartment temperature
alarm
The freezer compartment temperature
alarm indicates that the compartment
is not at the optimum temperature. This
may occur: when using for the first time,
after defrosting and/ or cleaning, when
freezing large quantities of food or
when the door to the freezer does not
close completely.
To turn off the sound signal, briefly press the “Turn off sound alarm”
button (the temperature display will stop flashing). When the
optimum temperature conditions have been reached, the red icon will
automatically turn off. If the freezer compartment temperature alarm
continues, contact the Authorised Technical Assistance Service.
icon will
The red
light up, a sound signal is
activated and the letter “F”
is flashing on the display.
Malfunction alarm
The alarm indicates the malfunction of a
technical component.
Call the authorized Technical Assistance Service. To turn the sound
signal off, briefly press the “Turn off sound alarm” button.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website docs.bauknecht.eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identification plate.
400011185893
">
