Indesit VIS 640 C Instruction for Use

EN
SAFETY INSTRUCTIONS
IMPORTANT TO BE READ AND OBSERVED
Download the complete instruction manual http://
docs.indesit.eu or call the phone number shown
on the warranty booklet.
 This appliance is intended to be used in household
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels, bed &
breakfast and other residential environments.
 No other use is permitted (e.g. heating rooms).
 This appliance is not for professional use. Do not
use the appliance outdoors.
Before using the appliance, read these safety
instructions. Keep them nearby for future reference.
These instructions and the appliance itself provide
important safety warnings, to be observed at all
times. The manufacturer declines any liability for
failure to observe these safety instructions, for
inappropriate use of the appliance or incorrect
setting of controls.
 Very young children (0-3 years) should be kept
away from the appliance. Young children (3-8 years)
should be kept away from the appliance unless
continuously supervised. Children from 8 years old
and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge can use this appliance only if they
are supervised or have been given instructions on
safe use and understand the hazards involved.
Children must not play with the appliance. Cleaning
and user maintenance must not be carried out by
children without supervision.
 WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements.
Children less than 8 years of age shall be kept away
unless continuously supervised.
 WARNING: If the hob surface is cracked, do not
use the appliance - risk of electric shock.
 WARNING: Danger of fire: Do not store items on
the cooking surfaces.
 
CAUTION: The cooking process has to be
supervised. A short cooking process has to be
supervised continuously.
 WARNING: Unattended cooking on a hob with
fat or oil can be dangerous - risk of fire. NEVER try to
extinguish a fire with water: instead, switch off the
appliance and then cover flame e.g. with a lid or a
fire blanket.
 Do not use the hob as a work surface or support.
Keep clothes or other flammable materials away
from the appliance, unitl all the components have
cooled down completely - risk of fire.
 Metallic objects such as knives, forks, spoons and
lids should not be placed on the hob surface since
they can get hot.
 After use, switch off the hob element by its
control and do not rely on the pan detector.
PERMITTED USE
 CAUTION: the appliance is not intended to be
operated by means of an external switching device,
such as a timer, or separate remote controlled
system.
INSTALLATION
 The appliance must be handled and installed by
two or more persons - risk of injury. Use protective
gloves to unpack and install - risk of cuts.
 
Installation, including water supply (if any),
electrical connections and repairs must be carried
out by a qualified technician. Do not repair or replace
any part of the appliance unless specifically stated in
the user manual. Keep children away from the
installation site. After unpacking the appliance,
make sure that it has not been damaged during
transport. In the event of problems, contact the
dealer or your nearest After-sales Service. Once
installed, packaging waste (plastic, styrofoam parts
etc.) must be stored out of reach of children - risk of
suffocation. The appliance must be disconnected
from the power supply before any installation
operation - risk of electric shock. During installation,
make sure the appliance does not damage the
power cable - risk of fire or electric shock. Only
activate the appliance when the installation has
been completed.
 Carry out all cabinet cutting operations before
fitting the appliance and remove all wood chips and
sawdust.
 If the appliance is not installed above an oven, a
separator panel (not included) must be installed in
the compartment under the appliance.
ELECTRICAL WARNINGS
 It must be possible to disconnect the appliance
from the power supply by unplugging it if plug is
accessible, or by a multi-pole switch installed
upstream of the socket in accordance with the
wiring rules and the appliance must be earthed in
conformity with national electrical safety standards.
 Do not use extension leads, multiple sockets or
adapters. The electrical components must not be
accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not
operate this appliance if it has a damaged power
cable or plug, if it is not working properly, or if it has
been damaged or dropped.
 If the supply cord is damaged, it must be replaced
with an identical one by the manufacturer, its service
agent or similarly qualified persons in order to avoid
a hazard - risk of electric shock.
CLEANING AND MAINTENANCE
the appliance. This appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent
negative consequences for the environment and human health.
DISPOSAL OF PACKAGING MATERIALS
Make the most of your hot plate’s residual heat by switching it off a few
minutes before you finish cooking.
The base of your pot or pan should cover the hot plate completely; a
container that is smaller than the hot plate will cause energy to be wasted.
Cover your pots and pans with tight-fitting lids while cooking and use
as little water as possible. Cooking with the lid off will greatly increase
energy consumption.
Use only flat-bottomed pots and pans.
 WARNING: Ensure that the appliance is switched
off and disconnected from the power supply before
performing any maintenance operation; never use The symbol on the product or on the accompanying documentation
steam cleaning equipment - risk of electric shock.
indicates that it should not be treated as domestic waste but must be
 Do not use abrasive or corrosive products, taken to an appropriate collection center for the recycling of electrical
and electronic equipment.
chlorine-based cleaners or pan scourers.
ENERGY SAVING TIPS
The packaging material is 100% recyclable and is marked with the recycle
symbol
.
The various parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority regulations
governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable or reusable materials.
Dispose of it in accordance with local waste disposal regulations.
For further information on the treatment, recovery and recycling of
household electrical appliances, contact your local authority, the
collection service for household waste or the store where you purchased
DECLARATION OF CONFORMITY
This appliance meets the Ecodesign requirements set out in European
Regulation n. 66/2014, in conformity to the European standard
EN 60350‑2.
EN
INSTALLATION
The cooktop must be set into a worktop between 30 mm and 60 mm deep.
Install a separator panel under the hob.
57
The lower part of the product must not be accessible after installation.
Do not fit the separator panel if an undertop oven is installed.
min. 20 mm
The distance between the underside of the appliance and the separator panel
75 80
6-7 cm
must respect the dimensions given in the figure.
In order to ensure the correct operation of the product, do not obstruct the
minimum required clearance between the hob and the top of the unit (min. 5 mm).
If an undertop oven is installed, make sure the oven is equipped with a cooling system.
For built-in dimensions and installation see the picture in this paragraph.
A minimum distance must be maintained between the hob and the hood above it. Please refer to the user manual of the hood for more informations.
Do not install the cooktop near a dishwasher or washing machine, so that the electronic circuits do not come into contact with steam
or moisture, which could damage them.
To remove the hob, use a screwdriver (not provided) to prise off the perimeter clips on the underside of the appliance.
min. 5 mm
•
•
•
•
•
•
•
•
•
•
•
PLACING THE HOB
Apply the supplied gasket to the cooktop, after having cleaned its surface. After the electrical connection (see the chapter “Electrical connection”),
position each fixing clips on the dedicated slots on the lateral sides of the hob as shown in the picture. Then push the hob inside the cut out and
check that the glass is flat and parallel to the worktop. The fixing clips are designed for every type of worktop material (wood, marble, etc).
1
2
3
4x
DIMENSIONS AND DISTANCES TO BE MANTAINED
i
L
Min. 40 cm
Min.10 cm
Min. 5 cm
Min. 5 mm
R = Min. 6,5 mm
Max. 8 mm
0
Min. 50 mm
580 mm
650 mm
700 mm
0
490 +2 mm
510 mm
553 mm
0
R = 11,5 mm
583 +2 mm
+1
0
483 mm
30 mm
52 mm
560 +2 mm
0
490+2 mm
0
0
513 +2
mm
560+2 mm
R = 11,5 mm
R = Min. 6,5 mm
Max. 8 mm
6 mm
ELECTRICAL CONNECTION
Electrical connection must be made before connecting the appliance to the electricity supply.
Installation must be carried out by qualified personnel who know the current safety and installation regulations. Specifically, installation must be
carried out in compliance with the regulations of the local electricity supply company.
Make sure the voltage specified on the dataplate located on the bottom of the appliance is the same as that of the home.
Regulations require that the appliance be earthed: use conductors (including the earth conductor) of the appropriate size only.
The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from failure to observe the regulations
provided in this chapter.
CONNECTION TO THE TERMINAL BLOCK
blue/grey
black/brown
yellow/green
ATTENTION: the power supply cable must be long enough to allow the cooktop to be removed from the worktop and must be positioned so as to
avoid damage or overheating caused by contact with the base.
• Remove the terminal cover (A) by unscrewing the screw and insert the cover into the hinge (B) of the terminal
• Plug the power cord into the clamp and connect the wires to the terminal block as shown in the wiring diagram located near the terminal.
• Secure the power cable with the cable clamp.
• Close the cover (C) and screw on the terminal with the screw removed.
For each connection to the network, the hob automatically checks for a few seconds.
380-415V 3N~
380-415V 2N~
black
brown
blue
blue (grey)
yellow/green
220-240V ~
AU and UK
black
brown
}
}
yellow/green
blue
blue (grey)
}
220-240V 3~
ONLY FOR BELGIUM
black
brown
blue
blue (grey)
yellow/green
}
230V 2 phase 2N~
ONLY FOR NL
black
brown
yellow/green
blue
blue (grey)
PRODUCT DESCRIPTION
210 mm
145 mm
210 mm
145 mm
EN
CONTROL PANEL
Quick access
Control panel lock
Slider
On/Off
Cooking zone controls and corresponding display
Power Management
Timer/ Lock function
button Power
ACCESSORIES
POTS AND PANS
OK
NO
Only use pots and pans made from ferromagnetic
material which are suitable for use with induction hobs.
To determine whether a pot is suitable, check for the
symbol (usually stamped on the bottom). A magnet
may be used to check whether pots are magnetic.
RECOMMENDED POT BOTTOM WIDTHS
Place the pot on the required cooking zone before switching the hob on.
For good cooking results, the diameter of the base of the pot should
match the size of the hotplate.
IMPORTANT: The cooking zones will not switch on if pots are not the
right size.
To determine the size of the pot please measure the base of the pot
and refer to recommended pots bottom width table, for perfect usage
and correct pan detection. Each cooking zone has a minimum limit
of detecting pans, which varies depending on the material of the pan
being used. You should therefore use the cooking zone that is most
suitable for the diameter of your pan.
DIAMETER (cm)
MAX (cm)
MIN(cm)
14,5
18
21
14,5
18
21
10
12
15
RECOMMENDED POT POSITION
For best performance, when you use two pots simultaneously, put them
according to the pictures below:
IMPORTANT: To avoid a permanent damage the hob:
• do not use pots with bottoms that are not flat;
• do not use metal pots with enamelled bottom;
• do not place hot pots/pans over the control panel.
FIRST TIME USE
POWER MANAGEMENT
Thanks to the “Power management” function, the user can set the
maximum power the hob can reach, as required.
This setting is possible at any time and is maintained until the next
change.
By setting the required maximum power, the hob automatically adjusts
distribution in the various cooking zones, ensuring that this limit is
never exceeded; with the advantage of also being able to manage all
the zones simultaneously, but without overload problems.
4 maximum power levels are available and showed on display: 2.5 kW –
4.0 kW – 6.0 kW – 7.2 kW. (7.2 kW is considered as max power of cooktop).
At the time of purchase, the hob is set to maximum power.
To set the hob power:
After plugging the appliance into the electrical socket, in the first 60
seconds it is possible to set the required power level by running the
following points:
• Press for approximately 3 seconds both
(step 1).
• Press the Power Management button
to confirm the previous
step (step 2). The display shows
.
•
•
Press
to set the chosen level amongst the different options
available (step 3). The light comes on together with the in-use lights
for the individual cooking zones.
Press the Power Management button
to confirm the previous
step (step 4). The display shows the set level which flashes for
approximately 2 seconds; after which the hob emits an acoustic
signal and then turns itself off; it is now ready for use.
In case of an error when setting the power, the symbol
appears in
the middle and an acoustic signal sounds for about 5 seconds. In this
case repeat the configuration procedure from the beginning. If the error
occurs again, contact the After-Sales Service.
During normal use, if the user tries to increase the maximum available
power level when reached, the level of the zone in use flashes twice and
an acoustic signal sounds.
To obtain a higher power in that zone, it is necessary to manually
decrease the power level of one or more already active cooking zones.
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, press the
button for approx. 2 seconds until
the cooking zone displays light up. To switch off, press the same button
until the displays switch off. All the cooking zones are deactivated.
If the hob has been in use, the residual heat indicator “H” remains lit until
the cooking zones have cooled down.
If within 10 seconds of switching on, no function is selected, the hob
switches off automatically.
SPECIAL FUNCTIONS
Some models have special functions:
AUTOMATIC FUNCTION
The function automatically sets a power level suitable for maintaining
a low boil. Activate this function after bringing to the boil, pressing the
corresponding zone button first and then the button
.
SWITCHING ON AND ADJUSTING COOKING ZONES
Slider operation
Increase power level
Power indicator display
Selected cooking zone indication
Cooking zone positioning
Decrease power level
Place the pot on the cooking zone, switching the hob on, activate the
required cooking zone by pressing the corresponding “+” button. “0” appears
on the display. It is possible to select the required power level, from min. 0 to
max. 9, or booster “P” if available. To increase the power level, push the “+”
button. To decrease the power level push the “−” button.
DEACTIVATION OF COOKING ZONES
To switch off the cooking zone, press the corresponding “+” and “−”
button for more than 3 seconds.
The cooking zone switches off and, if still hot, the letter “H” appears on
the zone display.
CONTROL PANEL LOCK
This function locks the controls to prevent accidental activation of the
hob. To activate the control panel lock, switch the hob on and press the
Lock function button for three seconds; an acoustic signal and a luminous
indicator near the padlock symbol signal activation. The control panel is
locked except for the switching off function. To deactivate the control
lock, repeat the activation procedure. The luminous dot goes off and
the hob is active again.
The presence of water, liquid spilled from pots or any objects resting on
the button below the symbol can accidentally activate or deactivate the
control panel lock.
TIMER
The timer can be used to set the cooking time for a maximum of 99
minutes (1 hour and 39 minutes) for all the cooking zones.
Select the cooking zone to be used with the timer, press the timer (see
figure) and a beep signals the function. The display shows “00” and
the LED indication comes on. The Timer value can be decreased and
increased by keeping the slider function “+” and “-” buttons pressed.
When the set time has elapsed, an acoustic signal sounds and the
cooking zone switches off automatically. To deactivate the timer, keep
the Timer button pressed for at least 3 seconds.
To set the timer for another zone, repeat the above steps. The timer
display always shows the timer for the selected zone or the shortest
timer.
To modify or deactivate the timer, press the cooking zone selection
button for the timer in question.
RESIDUAL HEAT INDICATOR
The hob is fitted with a residual heat indicator for each cooking zone.
These indicators alert the user when cooking zones are still hot.
If the display shows , the cooking zone is still hot. If the residual
heat indicator of a given cooking zone is lit, that zone can be used, for
example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
INCORRECT OR MISSING POT INDICATOR
If you are using a pot that is not suitable, not correctly positioned or
not of the correct dimensions for your induction hob, the message “no
pot” will appear in the display (see figure at side). In these situations it
is recommended to reposition the pot on the hob surface until you find
the position of operation. If no pot is detected within 60 seconds, the
hob switches off.
FAST BOIL FUNCTION (BOOSTER )
This function, only present on some cooking zones, makes it possible
to exploit the hob’s maximum power (for example to bring water to the
boil very quickly).
To activate the function, press the “+” button until “P” appears on the
display. After 5 minutes’ use of the booster function, the appliance
automatically sets the zone to level 9.
ACTIVATION/DEACTIVATION OF THE ACOUSTIC SIGNAL
After switching the hob on, press and hold the “−” of the first cooking
zone and the external button on the right simultaneously for at least
five seconds (“as shown below”).
5 Sec
EN
POWER LEVEL TABLE
POWER LEVEL
Max. power
LEVEL USE
(indicating cooking experience and habits)
TYPE OF COOKING
Boost
9-7
High power
7-5
Medium power
Fast heating
Ideal for rapidly increasing the temperature of food to fast boiling in the case of
water or rapidly heating cooking liquids
Frying - boiling
Ideal for browning, starting to cook, frying frozen products, fast boiling
Browning - slow frying boiling - grilling
Ideal for slow frying, maintaining a high boil, cooking and grilling (short
duration, 5-10 minutes)
Browning - cooking - stewing
- slow frying - grilling
Ideal for slow frying, maintaining a low boil, cook ing and grilling (medium
duration, 10-20 minutes), preheating
Cooking - stewing - slow
frying - grilling
Ideal for stewing, maintaining a gentle boil, cooking and grilling (long duration)
4 -3
Cooking - simmering thickening - creaming pasta
Low power
2-1
Melting - defrosting
- keeping food hot creaming risottos
OFF
Zero power
Support surface
Ideal for prolonged cooking (rice, sauces, roasts, fish) with liquids (e.g. water,
wine, broth, milk), creaming pasta
Ideal for prolonged cooking (volumes of less than a litre: rice, sauces, roasts,
fish) with liquids (e.g. water, wine, broth, milk)
Ideal for softening butter, gently melting chocolate, thawing small products
and keeping just-cooked food hot (e.g. sauces, soups, minestrone)
Ideal for keeping just-cooked food hot, creaming risottos and keeping serving
dishes warm (with induction-suitable accessory)
Hob in standby mode or off (possible end-of-cooking residual heat, indicated
by “H”).
MAINTENANCE AND CLEANING
 Disconnect the appliance from the power supply.
•
•
•
•
•
•
•
•
Do not use steam cleaning equipment.
Do not use abrasive sponges or scouring pads as they may damage
the glass.
After each use, clean the hob (when it is cool) to remove any deposits
and stains from food residue.
Sugar or foods with a high sugar content can damage the hob and
must be immediately removed.
Salt, sugar and sand could scratch the glass surface.
Use a soft cloth, absorbent kitchen paper or a specific hob cleaner
(follow the Manufacturer’s instructions).
Spills of liquid in the cooking zones can cause the pots to move or
vibrate.
After cleaning the hob, dry thoroughly.
If the iXelium™ logo appears on the glass, the hob has been treated
with iXelium™ technology, an exclusive Whirlpool finish which ensures
perfect cleaning results, as well as keeping the surface of the hob shiny
for longer.
To clean iXelium™ hobs, follow these recommendations:
• Use a soft cloth (microfibre is best) dampened with water or with
everyday glass cleaning detergent.
• For best results, leave a wet cloth on the glass hob surface for a few
minutes.
TROUBLESHOOTING
If the hob will not operate correctly, before calling the After-Sales Service,
refer to the Troubleshooting Guide to determine the problem.
•
•
•
•
•
If after the above checks the fault still occurs, get in touch with the nearest
After Sales Service.
Read and follow the instructions given in the section “Daily use”.
Check that the electricity supply has not been shut off.
Dry the hob thoroughly after cleaning it.
If, when the hob is switched on, alphanumeric codes appear on the
display, consult the following table for instructions.
If the hob cannot be switched off after using it, disconnect it from
the power supply.
ERROR CODE
DESCRIPTION
POSSIBLE CAUSES
ERROR ELIMINATION
C81, C82
The control panel switches off because
of excessively high temperatures.
The internal temperature of
electronic parts is too high.
Wait for the hob to cool down
before using it again.
C83
The control panel indicates the error
code hob off because of an issue on
electronic circuit.
Cooktop has been supplied with
over voltage.
Cooktop may be still used but call
the After-Sales Service.
C85
Hob is not able to give power to the
pot.
Pot is not suitable to the induction
hob.
Use another induction pot.
F02 or F04 or C84
The connection voltage is wrong or issue
to the power supply.
The sensor detects a discrepancy
between the appliance voltage
and that of the mains supply.
Disconnect the hob from the
mains and check the electrical
connection.
F01, F05, F06, F07, F10, F12,
F25, F33, F34, F36, F37, F46,
F47, F48, F49, F58, F61, F62,
F63, F72, F74, F77
Disconnect the hob from the power supply.
Wait a few seconds and plug it again.
If the problem persists, call the After-Sales Service and specify the error code.
NOISES MADE BY THE HOB
The induction cooktops can generate a set of noise and vibration
during normal operation, depending on the type of material and the
processing of the food.
These conditions are normal and essential for the proper functioning of
the induction system, they are not indication of failure or damage.
AFTER-SALES SERVICE
In order to receive a more complete assistance, please register your
product on www‌.‌indesit.com/register.
•
the service number (number after the word Service on the rating
plate). The service number is also indicated on the guarantee
booklet;
•
•
your full address;
your telephone number.
BEFORE CALLING THE AFTER-SALES SERVICE:
1. See if you can solve the problem by yourself with the help of the
suggestions given in the TROUBLESHOOTING.
2. Switch the appliance off and back on again to see if the fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN
TOUCH WITH THE NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or
follow the instructions on the website www‌.‌indesit.com.
When contacting our Client After sales service, always specify:
• a brief description of the fault;
• the type and exact model of the appliance;
Type: XXX
Mod.: XXX
XXXXXXXXXXXXXXXXXXXX
Made in X
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXX
01
XXXX XXX XXXXX
If any repairs are required, please contact an authorized after-sales
service (to guarantee that original spare parts will be used and repairs
carried out correctly).
XX XXXX XXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
400011291870
">