Panasonic TXP42GT20E Quick Start Guide


Add to my manuals
28 Pages

advertisement

Panasonic TXP42GT20E Quick Start Guide | Manualzz
Model No.
TX-P42GT20E
Operating Instructions
Plasma Television
Contents
Be Sure to Read
● Safety Precautions (Warning / Caution) ························· 2
● Notes ·············································································· 3
● Maintenance ··································································· 3
For more detailed instructions, refer to the Operating
Instructions on the CD-ROM.
To view the Operating Instructions on the CD-ROM, you
need a computer equipped with a CD-ROM drive, and
Adobe® Reader® (Version 7.0 or later is recommended)
installed on your computer.
Depending on the operating system or settings on your computer,
the Operating Instructions may not start automatically.
In this case, open the PDF file under the “MANUAL” folder
manually to view the instructions.
Quick Start Guide
● Accessories / Options ··································· 4
● Identifying Controls ······································· 6
● Basic Connection ········································· 8
● Auto Setup ·················································· 10
● Viewing 3D images ····································· 14
● How to Use VIERA TOOLS ························ 20
● How to Use Menu Functions ······················ 21
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer
for assistance.
English
TQB0E2041U1G
Safety Precautions
Warning
Handling the mains plug and lead
●Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause
fire.)
●Ensure that the mains plug is easily accessible.
●Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.
• An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective
earthing connection.
●Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
●Do not use any mains lead other than that provided with this TV. (This may cause fire or electrical shock.)
●Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
• Do not move the TV with the lead plugged in the socket outlet.
• Do not place a heavy object on the lead or place the lead near a high-temperature object.
• Do not twist the lead, bend it excessively, or stretch it.
• Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
• Do not use a damaged mains plug or socket outlet.
If you find any
abnormality,
remove the mains plug
immediately!
Power source
●This TV is designed to operate on AC 220-240 V,
50 / 60 Hz.
Do not remove covers and
NEVER modify the TV yourself
AC 220-240 V
50 / 60 Hz
Do not insert foreign objects
into the TV
●Do not allow any objects to drop into the TV through
the air vents. (Fire or electrical shock may result.)
●Do not remove the rear cover as live parts are
accessible when it is removed. There are no user
serviceable parts inside. (High-voltage components
may cause serious electrical shock.)
●Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
Do not expose to rain or
excessive moisture
●To prevent damage which might result in electric
shock or fire, do not expose this TV to rain or
excessive moisture. This TV must not be exposed
to dripping or splashing water and objects filled with
liquid, such as vases, must not be placed on top of
or above the TV.
Do not expose to direct sunlight
and other sources of heat
●Avoid exposing the TV to direct sunlight and other
sources of heat.
To prevent the spread of
fire, keep candles or other
open flames away from
this product at all times
2
Do not place the TV on sloped
or unstable surfaces
●The TV may fall off or tip over.
Use only the dedicated
pedestals / mounting equipment
●Using an unapproved pedestal or other fixtures may
make the TV unstable, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
●Use approved pedestals (p. 5) / wall-hanging
brackets (p. 4).
Do not allow children to handle
SD Card
●As with any small object, SD Cards can be
swallowed by young children. Please remove
SD Card immediately after use and store out of
reach of children.
■When cleaning the TV, remove the
Caution
mains plug
■Do not block the rear air vents
●Blocked ventilation by newspapers, table
●Cleaning an energized TV may cause electrical shock.
cloths, curtains, etc. may cause overheating,
fire or electrical shock.
■When the TV is not going to be used for a ■Do not expose your ears to excessive
long period of time, remove the mains plug
volume from the headphones
●This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to a live
socket outlet.
■Transport only in upright position
●Transporting the TV with its display panel facing upward
or downward may cause damage to the internal circuitry.
■Allow sufficient space around the TV for
radiated heat
■Do not apply strong force or
impact to the display panel
10
10
keep the space between
the bottom of the TV and
the surface where the TV
7
is set.
●In case of using
Wall-hanging bracket,
(cm) follow the manual of it.
Notes
Do not display a still picture
for a long time
by 2 or more people. Support as
shown to avoid injury by the TV
tipping or falling.
■Auto power standby function
●The TV will automatically go to Standby mode in the following
conditions:
• no signal is received and no operation is performed for
30 minutes in Analogue TV mode
• “Off Timer” is active in the Setup Menu (p. 24)
• no operation is performed for the period selected in
“Auto Standby” (p. 27)
●This function does not affect the recording of Timer
Programming, Direct TV Recording and One Touch Recording.
■Keep the TV away from these types of
equipment
●Electronic equipment
In particular, do not place video equipment near the TV.
(Electromagnetic interference may distort images / sound.)
●Equipment with an infrared sensor
This TV also emits infrared rays. (This may affect operation of
other equipment.)
Maintenance
●Notes ●Maintenance
●Safety Precautions
This causes the image to remain on the
plasma screen (“image retention”).
This is not considered a malfunction and is
not covered by the warranty.
Typical still images
●Channel number and other logos
● Image displayed in
4:3 mode
● Video game
● Computer image
To prevent image retention, contrast is
lowered automatically after a few minutes
if no signals are sent or no operations are
performed.
●This may cause damage resulting in injury.
■The TV is heavy. Handle the TV
●When using the pedestal,
Minimum distance
10
●Irreversible damage can be caused.
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.
For stubborn dirt:
Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then wring
the cloth and wipe the surface. Finally, wipe away all the moisture.
Caution
●Do not use a hard cloth or rub the surface too hard. This may cause scratches on the surface.
●Take care not to subject the TV’s surfaces to water or detergent. A liquid inside the TV could lead to product failure.
●Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
●The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch
the surface with your fingernail or other hard objects.
●Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
3
Accessories / Options
Standard accessories
□ Remote Control
●N2QAYB000489
Check that you have the accessories and items shown
□ Batteries for the
Remote Control (2)
●R6
□ Clamper
□ Mains Lead
p. 8
p. 8
p. 6
□ Operating Instructions
□ Pan European
□ Pedestal
□ Ferrite core (2)
p. 5
Guarantee Card
●Accessories may not be placed all together. Take care not to throw them away unintentionally.
●This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
Optional accessories
□ Wireless LAN Adaptor
●DY-WL10E-K
□ 3D Eyewear set
(Battery type)
●TY-EW3D10E
Caution
●To use the Wireless LAN Adaptor, an access point needs to be obtained.
●It is recommended to use the Wireless LAN Adaptor with the extension cable.
●To avoid malfunctions caused by radio wave interference, keep the TV away
from the devices such as other wireless LAN devices, microwaves and the
devices that use 2.4 GHz and 5 GHz signals when using the Wireless LAN
Adaptor.
●Depending on the area, this optional accessory may not be available.
●Additional information for Wireless LAN Adaptor and access point may be on
the following web site. (English only)
http://panasonic.jp/support/global/cs/tv/
(Rechargeable type
available in autumn 2010)
●TY-EW3D2LE
●TY-EW3D2ME
●TY-EW3D2SE
□ Communication Camera
●TY-CC10W
□ Wall-hanging bracket
●TY-WK4P1RW
Please contact your nearest Panasonic dealer to purchase the recommended
optional accessories. For additional details, please refer to the manual of the
optional accessories.
●If you need 3D Eyewears additionally, please purchase
this optional accessory.
●For more product information (English only)
http://panasonic.net/avc/viera/3d/eu.html
Caution
●This camera can be used on VIERA CAST.
●Please also read the manual of the camera.
●Depending on the area, this optional accessory may not be available.
For details, consult your local Panasonic dealer.
Rear of the TV
400 mm
300 mm
Warning
Holes for wall-hanging
bracket installation
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
Depth of screw:
minimum 15 mm,
maximum 30 mm
(View from the side)
●Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of personal
4
injury and product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask
your dealer or a licenced contractor to secure the wall-hanging brackets. Any damage caused by installing
without a qualified installer will void your warranty.
●Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
●Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
●Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in
the wall before hanging bracket.
●To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
●Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
●Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
●If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
●If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
●If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV.
●If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the
specified procedure. (see below)
●Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Assembly screw (3)
(silver)
Assembly screw (4)
(black)
M5 × 18
Pole
Base
●TBLA3828
●TBLX0184
M5 × 30
A
Use the assembly screws
to fasten the pole
to
the base
securely.
●Make sure that the screws are securely tightened.
●Forcing the assembly screws the wrong way will strip
the threads.
D
Front
●Accessories / Options
■Assembling the pedestal
■Securing the TV
Use the assembly screws
to fasten securely.
●Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
●Carry out the work on a horizontal and level surface.
B
Arrow mark
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
Remove four assembly screws
from the TV.
Pull out the pedestal from the TV.
Remove three assembly screws
from the pole.
Hole for pedestal
installation
D
(View from the bottom)
5
Identifying Controls
Remote Control
■Installing / removing remote’s batteries
1
2
Pull
open
Close
Note the correct
polarity (+ or -)
Hook
Caution
●Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
●Do not mix old and new batteries.
●Do not mix different battery types (such as alkaline and manganese batteries).
●Do not use rechargeable (Ni-Cd) batteries.
●Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
●Do not disassemble or modify the remote control.
Media Player
●Switches to SD Card and USB device
viewing / listening mode
Input mode selection
Standby On / Off switch
●TV - switches DVB-S / DVB-C / DVB-T /
●Switches TV On or Off standby
Analogue mode
●AV - switches to AV input mode from Input
Main Menu
●Press to access Picture, Sound and
Selection list
Setup Menus
Direct TV Recording
●Records programme immediately in
Aspect
●Changes aspect ratio from Aspect Selection
list
●Also possible by pressing this button
repeatedly until you reach the desired aspect
SD CARD
INPUT
TV
AV
MENU ASPECT
DIRECT TV REC
EXIT
Channel / Programme Information
●Displays channel and programme
●Accesses VIERA Link Menu
OK
●Confirms selections and choices
●Press after selecting channel positions
VIERA
Lin
k
VIERA Link Menu
TEXT STTL INDEX HOLD
def
ghi
jkl
mno
pqrs
tuv
wxyz
operation of various functions
●Switches to teletext mode
LAST VIEW
●Displays subtitles
Return
Hold
●Freeze / unfreeze picture
●Holds the current teletext page (teletext
mode)
Index
(teletext mode)
●Switches to previously viewed channel or
input mode
REC
PROGRAMME
Sound Mute
Channel Up / Down
●Selects channel in sequence
Connected equipment operations
DVD/VCR
Volume Up / Down
TV
6
●Makes selections and adjustments
Last view
Numeric buttons
●Switches sound mute On or Off
●Displays TV Guide
●Returns to the teletext index page
Subtitles
(Press for about 1 second)
TV Guide
●Returns to the previous menu / page
abc
Coloured buttons
●Changes channel and teletext pages
●Sets characters
●When in Standby mode, switches TV On
●Displays some special feature icons and
Cursor buttons
●Easy optional setting for viewing, sound, etc.
Teletext
VIERA TOOLS
accesses easily
BACK/
RETURN
OPTION
Option Menu
●Used for the selection, navigation and
●Displays VIERA CAST home screen
●Returns to the normal viewing screen
to quickly change channel
●Displays the Channel List
VIERA CAST
Exit
TO
VIERA OLS
IDE
GU
information
DVD Recorder / VCR with Q-Link or
VIERA Link connection
TV
TV
Remote control signal receiver
●Do not place any objects between the TV remote control signal
receiver and remote control.
C.A.T.S. (Contrast Automatic Tracking System) sensor
●Senses brightness to adjust picture quality when “Eco Mode”
in the Picture Menu is set to “On” (p. 22)
Power and Timer LED
●Standby: red
●On: green
Infrared transmitter for 3D Eyewear ●Timer Programming On: orange
●Do not place any objects between the ●Recording of Timer Programming,
transmitter and 3D Eyewear.
CI slot
1
2
Common Interface
F
USB 1 / 2 ports
Function select
●Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC signal) / Bass (“Music” or “Speech” mode in the
Sound Menu) / Treble (“Music” or “Speech” mode in the
Sound Menu) / Balance / Auto Setup
TV
Direct TV Recording or One Touch Recording
is in progress: orange (flash)
●Standby with Timer Programming On,
Direct TV Recording or One Touch Recording:
red with orange flash
●When using the remote control, indicates the TV
has received a command.
Changes the input mode
AV
Increases or decreases the channel position by one.
When a function is already displayed, press to increase or decrease
the selected function.
When in Standby mode, switches TV On (Press for about 1 second).
SD Card slot
HDMI4 terminal
HDMI 4
AV 3
Adjusting the panel to your desired angle
Headphones jack
●Do not place any objects within the full rotation range.
V
AV3 terminals
15º
R
15º
(View from the top)
Mains power On / Off switch
●Switch On to turn on the TV or turn the TV
to Standby mode by the remote control.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
■How to use remote control
Move the cursor / adjust levels / select from
a range of options
Move the cursor / select the menu item
Access the menu / store settings after
adjustments have been made or options
have been set
MENU
BACK/
RETURN
EXIT
Open the main menu
●Identifying Controls
L
Return to the previous menu
Exit the menu system and return to the
normal viewing screen
■ON SCREEN HELP Instructions box - Operation guide
Example (Sound Menu):
Sound Menu
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to Wall
MPX
Select
EXIT
Change
RETURN
1/2
Music
0
0
0
11
Off
0
Over 30cm
Stereo
Page up
Page down
Operation guide will help you.
7
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet
first.
There are some restrictions on placement for viewing 3D images. For details
p. 14 and p. 17
Example 1
Connecting dish or aerial
●To ensure your satellite dish is correctly installed, please consult your local dealer.
●Also please consult the received satellite broadcasting companies for details.
TV only
Satellite dish
Rear of the TV
AC 220-240 V
50 / 60 Hz
●For digital satellite
broadcasts
Satellite cable
■Mains Lead
Mains lead
(supplied)
■Clamper
Attach the clamper
hole
Insert the clamper
in a hole
Make sure that
the mains lead is
securely fixed.
Push until both side
tabs click
●To remove from the TV:
●To remove from the TV:
tabs
snaps
Press both tabs and pull on
mains connector to release
Keep pushing
both side snaps
Terrestrial
aerial
Bundle the cables
Cable
hooks
●For digital cable, digital terrestrial
Set the tip
in the hooks
and analogue broadcasts
●To loosen:
HDMI
1
COMPONENT
AUDIO AUDIO
OUT
IN
Y
DIGITAL
AUDIO
OUT
PC
knob
8
Keep pushing
the knob
HDMI 2
(ARC)
L
L
PB
R
R
PR
RGB
VIDEO
AV1
RGB
VIDEO
S VIDEO
HDMI
3
AV2
●Do not bundle the Satellite cable, RF cable and mains lead together (could cause distorted image).
●Fix cables with clampers as necessary.
●When using the optional accessory, follow the option’s assembly manual to fix cables.
RF cable
Example 2
Connecting DVD Recorder / VCR
and Player
TV, DVD Recorder / VCR and Player
Example 3
Connecting DVD Recorder / VCR
and Set top box
TV, DVD Recorder / VCR and Set top box
Rear of the TV
Terrestrial
aerial
Rear of the TV
Terrestrial
aerial
Cable
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
RF cable
RF cable
Mains lead
(supplied)
Mains lead
(supplied)
HDMI
1
COMPONENT
AUDIO AUDIO
OUT
IN
DIGITAL
AUDIO
OUT
PC
R
PC
PB
PR
RGB
VIDEO
Fully wired HDMI
compliant cable
AV1
RGB
VIDEO
S VIDEO
HDMI 2
(ARC)
L
L
PB
R
R
PR
HDMI
3
AV2
RGB
VIDEO
AV1
RGB
VIDEO
S VIDEO
HDMI
3
AV2
Fully wired
SCART cable
Fully wired
SCART cable
RF cable
Fully wired HDMI
compliant cable
RF cable
●Basic Connection
R
L
Y
DIGITAL
AUDIO
OUT
HDMI 2
(ARC)
L
HDMI
1
COMPONENT
AUDIO AUDIO
OUT
IN
Y
Fully wired
SCART cable
Player /
3D-compatible player
DVD Recorder
or VCR
DVD Recorder
or VCR
Set top box
RF OUT
RF IN
Cable
RF OUT
RF IN
Note
●To watch 3D contents p. 14
●Connect to the TV’s AV1 / AV2 for a DVD Recorder / VCR supporting Q-Link.
●For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by
using HDMI cable.
●Please also read the manual of the equipment being connected.
9
Auto Setup
Search and store TV channels automatically.
●These steps are not necessary if the setup has been completed by your local dealer.
●Please complete connections (p. 8 and p. 9) and settings (if necessary) of the connected equipment before
starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment.
INPUT
TV
AV
ASPECT
N
DIRECT TV REC
1
Plug the TV into mains socket and switch On
2
Select the language
3
EXIT
TO
VIERA OLS
IDE
GU
def
ghi
jkl
mno
pqrs
tuv
wxyz
Deutsch
English
Français
Italiano
Español
Português
Nederlands
Dansk
Svenska
Norsk
Suomi
Türkçe
Еλληνικά
Polski
čeština
Magyar
Slovenčina
Български
Românǎ
Srpski
Hrvatski
Slovenščina
Latviešu
eesti keel
Lietuvių
set
Select your country
select
Country
Germany
Austria
France
Italy
Spain
Portugal
Switzerland
Malta
Andorra
Denmark
Sweden
Norway
Finland
Luxembourg
Belgium
Netherlands
Turkey
Greece
Poland
Czech
Hungary
Slovakia
Slovenia
Estonia
Lithuania
Others
set
●Depending on the country you select, you
may be required to select the Region. In
this case, select your region.
number for “Child Lock”. In this case, enter the PIN number.
●You will be asked to enter the
PIN number twice.
* * * *
●“0000” is not allowed for the PIN
number.
●Make a note of the PIN number
in case you forget it.
Child Lock-PIN Entry
Please enter new PIN
PIN
TEXT STTL INDEX HOLD
abc
select
Menüsprache
●Depending on the country you select, you may be required to input the PIN
BACK/
RETURN
OPTION
(Takes a few seconds to be displayed)
4
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Select the mode you want to tune
tune / skip tuning
TV Signal Selection
DVB-S
DVB-C
D
DVB-T
DHD
DVB-T support for HD services
A
Analogue
Start Auto Setup
REC
PROGRAMME
DVD/VCR
TV
5
: tune (the mode will be tuned and
searched for the available channels)
: skip tuning
●“DVB-C” may not appear depending on the
country you select.
Select “Start Auto Setup”
TV Signal Selection
access
DVB-S
DVB-C
TV
select
D
DVB-T
DHD
DVB-T support for HD services
A
Analogue
select
Start Auto Setup
Auto Setup starts
●Auto Setup will start to search for TV channels and store them.
The stored channels and sorted channel order vary depending on the
country, area, broadcasting system and conditions of signal reception.
(continued to the next page)
10
Auto Setup varies depending on the country you select.
●DVB-S Search Mode
Search Mode
All Channels
select mode
set
Free Channels
●DVB-S Satellite Search
DVB-S Auto Setup
Satellite
Analogue Scan
Progress
Analogue Scan
This will take up to 40 minutes.
21 Checking LNB2
0%
68
100%
68
Satellite
Astra 19.2°E
Hot Bird 13°E
Press EXIT to skip Satellite installation
Searching Satellite
●DVB-S Auto Setup
DVB-S Auto Setup
Satellite
Analogue Scan
21 Checking LNB1
Progress
0%
Analogue Scan
This will take about 30 minutes.
No.
Channel Name
372
CBBC Channel
372
BBC Radio Wales
372
E4
Type
Free TV
Free TV
Free TV
Free TV: 3
Radio: 0
Pay TV: 0
Searching
68
100%
68
Quality
10
10
10
●DVB-C Network Settings
Enter the Home Frequency and Network ID specified by your cable provider.
And then, select “Start Auto Setup”.
enter the frequency and network ID
DVB-C Network Settings
362 MHz
Frequency
Network ID
41001
Start Auto Setup
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Depending on the country you select, “Auto” is displayed
and you do not have to enter them.
In this case, Home Frequency and Network ID will be set
automatically.
access
select “Start Auto Setup”
●DVB-C Auto Setup
●Auto Setup
DVB-C Auto Setup
Progress
0%
100%
This will take about 3 minutes.
Channel Name
No.
1
CBBC Channel
2
BBC Radio Wales
3
E4
Type
Free TV
Free TV
Free TV
Free TV: 3
Radio: 0
Pay TV: 0
Searching
Quality
10
10
10
●DVB-T Auto Setup
DVB-T Auto Setup
Progress
CH 5
69
This will take about 3 minutes.
CH
Channel Name
62
CBBC Channel
62
BBC Radio Wales
62
E4
62
Cartoon Nwk
Type
Free TV
Free TV
Free TV
Free TV
Free TV: 4
Radio: 0
Pay TV: 0
Searching
Quality
10
10
10
10
Depending on the country you select, the channel selection screen
will be displayed after DVB-T Auto Setup if multiple channels have the
same logical channel number. Select your preferred channel or exit the
screen for automatic selections.
●Analogue Auto Setup
Analogue Auto Setup
Scan
This will take about 3 minutes.
CH
CH 29
CH 33
BBC1
CH 2
78 CC 1
41
Channel Name
Analogue: 2
Searching
Sending Preset Data
Please wait!
0%
Remote control unavailable
●If Q-Link, VIERA Link or similar technology compatible recorder
100%
is connected, channel, language, country / region settings are
automatically downloaded to the recorder.
●If downloading has failed, you can download later by the menu item.
“Download” (p. 24)
(continued to the next page)
11
Auto Setup
6
Setup the wireless LAN connection
Setup the wireless LAN connection to enable the network service functions.
(If you do not wish to use wireless LAN connection or the network service functions, skip this step.)
●To setup the wireless LAN connection, the Wireless LAN Adaptor (optional accessory) is required.
For the information about the Wireless LAN Adaptor
“Optional accessories” (p. 4)
●Confirm the encryption key, settings and positions of your access point before starting setup. For details,
read the manual of the access point.
connect the Wireless LAN Adaptor to the USB 1 or 2 port
Start wireless LAN connection setup?
Yes
No
Internet
environment
Please connect the wireless LAN adaptor (DY-WL10) to a
USB terminal.
Wireless LAN Adaptor
(optional accessory)
Access point
You can setup the wireless LAN connection later
select “Yes”
access
●To skip this step
EXIT
or select “No”
Wireless LAN connection setup starts
Select the connection type
Connection Type
Please select network connection type.
access
WPS(Push button)
Search for access point
select
■WPS(Push button)
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN Adaptor and
the access point.
WPS(Push button)
1) Please press the ‘WPS’ button on the access
point until its light flashes.
2) When the light is flashing select ‘Connect’ on
TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
●Ensure that your access point supports WPS for this setup.
●WPS: Wi-Fi Protected Setup™
■Search for access point
Access points found automatically are listed.
Select your desired access point
Available Access Points
No.
SSID
1
Access Point A
11n(2.4GHz)
2
Access Point B
11n(5GHz)
3
Access Point C
Wireless type
11n(5GHz)
Encrypt
Reception
access
select
: Encrypted access point
Encryption Key Setting
Connection will be made with the following settings:SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
D
X
d
x
E F G
Y Z
e f g
y z (
red
be displayed. It is recommended to select the encrypted access point.
Access Point Settings
Encryption key
C
W
c
w
highlighted access point
●To set manually
Access the encryption key input mode
Encryption key
B
V
b
v
yellow
●If the selected access point is not encrypted, the confirmation screen will
Please input the encryption key.
A
U
a
u
●To search access points again
●For the information of the
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
Enter the encryption key of the access point
Set characters one by one
Store
select
BACK/
RETURN
set
●You can set characters by using numeric buttons.
Select “Yes”
Access Point Settings
Encryption key is set to:XXXXXXXX
select
set
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes
No
●To re-enter the encryption key, select “No”.
●If the connection has failed, check the encryption key, settings and positions of your access point. And
then, follow the on screen instructions.
Exit to go to the next step
12
(continued to the next page)
7
Select “Home”
Select “Home” viewing environment to use in your home environment.
Please select your viewing environment.
Home
Shop
select
set
Auto Setup is now complete and
your TV is ready for viewing.
■“Shop” viewing environment
(for shop display only)
“Shop” viewing environment is the demonstration
mode to explain main features of this TV.
Select “Home” viewing environment to use in
your home environment.
●You can return to viewing environment selection
screen at the stage of Shop confirmation screen
and Automatic Demo Off / On selection screen.
Return to viewing environment selection
screen
Shop
You have selected shop mode
Automatic Demo
Off
●If tuning has failed, check the connection of the
Satellite cable, RF cable, and then, follow the on
screen instructions.
BACK/
RETURN
On
Select “Home”
Please select your viewing environment.
Home
Shop
select
set
Auto Setup is complete
●To change viewing environment later on, you
will need to initialise all settings by accessing
Shipping Condition.
“Shipping Condition” (p. 27)
●Auto Setup
Note
●If tuning has failed or to retune all channels “Auto Setup” (p. 25 and p. 26)
●To add the available TV mode later “Add TV Signal” (p. 25 and p. 26)
●To initialise all settings “Shipping Condition” (p. 27)
●If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
■Wireless LAN Adaptor
If you connect the Wireless LAN Adaptor later on, the confirmation screen will be displayed for the setup.
Wireless LAN adaptor connection
Wireless LAN adaptor connected, do you want to
set it up?
No - Exit
Current network type : Wireless
Yes
No
13
Viewing 3D images
You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by
wearing the 3D Eyewear (optional accessory p. 4).
●For using and wearing the 3D Eyewear please read the manual of the 3D Eyewear.
This TV supports “Frame Sequential∗1”, “Side by Side∗2” and “Top and Bottom∗3” 3D formats.
∗1: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately played
back
∗2, ∗3: Other available 3D formats
●How to view the 3D images
p. 16
Caution
To enjoy 3D images safely and comfortably, please read these instructions fully.
3D Eyewear
●Do not drop, exert pressure on, or step on the 3D Eyewear.
●Always store the 3D Eyewear in the case when not in use.
●Be careful of the tips of the frame when putting on the 3D Eyewear.
●Be careful not to trap a finger in the hinge section of the 3D Eyewear.
●Pay special attention when children are using the 3D Eyewear.
3D Eyewear should not be used by children younger than 5 - 6 years old, as a guideline.
All children must be fully supervised by parents or guardians who must ensure their safety and health
throughout the using 3D Eyewear.
Viewing 3D Content
●Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have
any other existing medical conditions.
●Please stop using the 3D Eyewear immediately, if you feel tired, are not feeling well or experience any
other uncomfortable sensation.
●Take an appropriate break after viewing a 3D movie.
●Take a break of between 30 - 60 minutes after viewing 3D content on interactive devices such as 3D
games or computers.
●Be careful not to strike the TV screen or other people unintentionally. When using the 3D Eyewear the
distance between the user and screen can be misjudged.
●The 3D Eyewear must only be worn when viewing 3D content.
●If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be
turned off automatically.
●If you suffer from any eyesight problems (short / far-sighted, astigmatism, eyesight differences in left
and right), please ensure to correct your vision before using the 3D Eyewear.
●Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content.
●Do not use the 3D Eyewear at a distance less than the recommended distance.
The recommended viewing distance is 3 times of image height (1.6 m or more).
When the top and bottom area of the screen is blackened, such as movies, view the screen at a
distance 3 times further than the height of the actual image. (That makes the distance closer than
above recommended figure.)
14
3D Eyewear Use
●Before using the 3D Eyewear, ensure no breakable objects surrounding the user to avoid any
accidental damage or injury.
●Remove the 3D Eyewear before moving around to avoid falling or accidental injury.
●Always put the 3D Eyewear in the case after use.
●Use the 3D Eyewear only for the intended purpose and nothing else.
●Do not use 3D Eyewear in the condition of high temperature.
●Do not use if the 3D Eyewear is physically damaged.
●Do not use any devices that emit the infrared signals near the 3D Eyewear, as this may cause the 3D
Eyewear false operations.
●Do not use devices (such as mobile phones or personal transceivers) that emit strong electromagnetic
waves near the 3D Eyewear as this may cause the 3D Eyewear to malfunction.
●Stop using the 3D Eyewear immediately if a malfunction or fault occurs.
●Stop using the 3D Eyewear immediately if you experience any redness, pain, or skin irritation around
the nose or temples.
●In rare cases, the materials used in the 3D Eyewear may cause an allergic reaction.
●Viewing 3D images
15
Viewing 3D images
To view the 3D images
To view the contents of the Frame Sequential format (ex. 3D-compatible Blu-ray Disc, etc.) with
3D effect
Connect the 3D-compatible player via an HDMI cable (p. 9) and playback the contents.
●Use fully wired HDMI compliant cable.
●For the settings of the player, read the manual of the player.
●If input mode is not switched automatically, select the input mode connected to the player.
●If you use the non 3D-compatible player, the images will be displayed without 3D effect.
To view the contents or programmes of 3D formats other than Frame Sequential with 3D effect.
Match the picture format in “3D Picture Format” (p. 19) before viewing.
●You can view “Side by Side” and “Top and Bottom” with 3D effect even if you use the non 3D-compatible player.
●Please consult the suppliers of contents or programmes for availability of this service.
●You can also view 3D images in photo / video mode in Media player and video mode in DLNA.
To view 2D images with 3D effect
Use a 2D-to-3D conversion function
“2D→3D” mode in “3D Picture Format” (p. 19)
Turn the 3D Eyewear on
Put on the 3D Eyewear
Watch the 3D images
●Safety precautions will be displayed when you first watch the
3D image. Select “Yes” or “No” to continue to view 3D images.
If you select “Yes”, this message will be displayed again
in the same condition after Mains power On / Off switch is
next turned On. Select “No” if you do not wish to display this
message again.
Example:
Safety Precautions
To enjoy 3D images safely and comfortably, please read the Operating Instructions fully.
Please stop using the 3D Eyewear immediately, if you feel tired, are not feeling well or
experience any other uncomfortable sensation.
Always put the 3D Eyewear in the case provided after use.
Would you like to display this message again later?
Yes
No
Note
●3D Eyewear is not included. Please purchase as necessary. (p. 4)
●For more detail about using and wearing the 3D Eyewear, please refer to the manual of the 3D Eyewear.
●The 3D image or 3D effect may not be available while VIERA CAST home screen is displayed or Ext Rec. of
Timer Programming / Direct TV Recording is in progress. As for the contents of the Frame Sequential format, no
images will be displayed in these conditions.
●If the room is lit by fluorescent lights (50 Hz) and light appears to flicker when using the 3D Eyewear, switch off
the fluorescent light.
●3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.
●Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as
computer screens, digital clocks or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.
●Do not use the 3D Eyewear as sunglasses.
●3D effects may be perceived differently depending on the person.
16
Available range for the 3D Eyewear
If the 3D Eyewear is placed outside the available area for about 5 minutes, the 3D Eyewear will be
turned off automatically.
: Available area to use the 3D Eyewear
Approx.
3.2 m
Approx.
3.2 m
35°
35°
Approx.
3.2 m
20°
Approx.
3.2 m
View from the top
20°
View from the side
Note
●The range may be shortened depending on the obstacles between the infrared sensors on the TV and the 3D
Eyewear, the dirt of the infrared sensors or the surrounding environment.
●If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be turned off
automatically even if in the available area.
●Viewing 3D images
17
Viewing 3D images
3D Settings
If the 3D images are not displayed correctly or seem unusual, please adjust and setup the 3D settings.
INPUT
TV
AV
ASPECT
MENU
DIRECT TV REC
1
Display the menu
2
Select “Setup”
MENU
EXIT
OPTION
access
Main Menu
Picture
Sound
Setup
select
TEXT STTL INDEX HOLD
@
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
REC
1/2
access
Access
Off
select
●You can also access 3D Settings menu
directly by using VIERA TOOLS.
“How to use VIERA TOOLS” (p. 20)
TV
TV
■To return to TV
18
Setup Menu
3D Settings
Off Timer
USB HDD Setup
Link Settings
Child Lock
Language
Display Settings
Network Setup
DivX® VOD
PROGRAMME
DVD/VCR
EXIT
3
Select “3D Settings”
4
Select one of the following functions and set
3D Settings
3D Picture Display
3D Picture Format
2D→3D Depth
3D Picture Sequence
Edge Smoother
Safety Precautions
3D
Auto
Mid
Normal
Off
Access
set
select
■3D Picture Display (2D / 3D)
Sets the TV to 3D or 2D mode
●Select “2D” to view 3D picture in 2 dimensional without wearing the 3D Eyewear.
■3D Picture Format (Auto / Side by Side / Top and Bottom / 2D→3D / Original)
Selects 3D picture format to suit the format of the source image
●Depending on the format of the source image, the 3D images will be displayed correctly regardless of the
setting of “3D Picture Format” (when “3D Picture Display” is set to “3D”) : for example, when receiving the
Frame Sequential format (ex. playback of the 3D-compatible Blu-ray Disc with the 3D-compatible player) via
an HDMI cable.
Auto (default) : 3D images are automatically displayed according to the image.
●This mode may not work properly depending on the source image format. In this case,
select the appropriate picture format.
Side by Side /
Top and Bottom : One of the formats of the 3D standard
●Select these formats as necessary.
●Not valid on Analogue and AV mode
2D→3D
: Converts 2D images into 3D
●Picture aspect is fixed to 16:9 regardless of the original aspect.
●For DVB, Analogue, AV, Component, HDMI, Media Player (photo and video) and Media
Server (video).
●On-screen displays are also seen in 3D in this mode.
●Please note the 3D images appear slightly different from the originals.
●Using this function for profit-making purposes, or publically showing images converted
from 2D to 3D in places such as shops or hotels etc. may infringe on the rights of the
copyright holder protected under copyright law.
Original
: Displays the source image as it is.
●Use to identify the format type of the source image.
Table of images that can be seen for each 3D Picture Format and the source image format
If the picture appears to be abnormal, refer to the table below to choose the correct 3D picture format setting.
Source image
format
Side by side
Top and bottom
Auto
Side by Side
∗1
Normal∗2
Top and Bottom
∗1
2D→3D
Original
∗2
Normal∗2
∗2
Normal format
(2D)
●Viewing 3D images
3D Picture Format
Normal
Normal
Normal∗2
∗ when the source image is not recognized correctly
∗2 When “3D Picture Display” is set to “3D”, the images will be displayed with 3D effect. When set to “2D”, displayed
without 3D effect.
1
●Depending on the player or broadcasts, the image may be different from the above illustrations.
■2D→3D Depth (Min / Mid / Max)
Select a level of 3D-image depth for viewing converted 2D images.
●This function is available when “3D Picture Format” is set to “2D→3D”.
■3D Picture Sequence (Normal / Reverse)
Select “Reverse” if you feel that the sense of depth is unusual.
●Not valid when “3D Picture Format” is set to “2D→3D”.
■Edge Smoother (Off / On)
Select “On” if you feel the contoured parts of an image are not smooth enough. (for “Side by Side” or “Top and
Bottom” format)
●Not valid when “3D Picture Format” is set to “2D→3D”.
■Safety Precautions
Displays the precautions for viewing 3D images.
Note
●These settings will not be memorized when changing the input mode or channel.
●When viewing the 3D-compatible 24p source movie, you can reduce juddering noises by setting “3D 24p Film
Display” in “Other Settings” (p. 27).
19
How to Use VIERA TOOLS
You can access some special features easily by using the VIERA TOOLS function.
EXIT
TO
VIERA OLS
1
2
Display icons of the feature
TO
VIERA OLS
Select a feature
select
access
VIERA Link Control
ntrol
ol
3
Follow the operations of each feature
●VIERA Link Control
When two or more compatible equipment are connected, a selection screen
will be displayed.
Please select the correct description and access.
●Photo
When two or more available devices are connected, a selection screen will be
displayed.
Please select the correct description and access.
●Video
TV
When two or more available devices are connected, a selection screen will be
displayed.
Please select the correct description and access.
■To return to TV
EXIT
or
TO
VIERA OLS
●Music
When two or more available devices are connected, a selection screen will be
displayed.
Please select the correct description and access.
●3D
●VIERA CAST
●Media Server
Note
●If the selected feature is not available, the demonstration to explain how to use it
20
can be displayed. Press the OK button to view the demonstration after selecting the
unavailable feature.
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
INPUT
TV
AV
ASPECT
MENU
DIRECT TV REC
EXIT
1
Display the menu
●Displays the functions that can be set
MENU
2
Select the menu
(varies according to the input signal)
access
Main Menu
Picture
Sound
Setup
BACK/
RETURN
OPTION
TEXT STTL INDEX HOLD
@
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
select
(example: Picture Menu)
Select the item
3
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Vivid Colour
Eco Mode
1/2
Dynamic
60
0
30
5
0
select
Warm
Off
Off
(example: Picture Menu)
Adjust or select
4
REC
PROGRAMME
DVD/VCR
TV
1/2
Dynamic
60
0
30
5
0
change
store or access
(Required by
some functions)
Warm
Off
Off
(example: Picture Menu)
TV
■To return to TV
at any time
■Choose from among
■To reset the settings
●To reset the picture settings only
alternatives
EXIT
Number and positions of alternatives
Colour Balance
■To return to
the previous
screen
Normal
Changed
■Adjust using the slide bar
Sharpness
5
“Reset to Defaults” in the
Picture Menu (p. 22)
●To reset the sound settings only
“Reset to Defaults” in the
Sound Menu (p. 24)
●To initialise all settings
“Shipping Condition” in the
Setup Menu (p. 27)
●How to Use Menu Functions
●How to Use VIERA TOOLS
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Vivid Colour
Eco Mode
Moved
BACK/
RETURN
■Go to the next screen
Child Lock
■To change
menu pages
up
down
Access
Displays the next screen
■Enter characters by free input menu
You can enter names or numbers freely for some items.
Set characters one by one
User input
Name
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
select
Store
BACK/
RETURN
set
●You can set characters by using numeric buttons.
21
How to Use Menu Functions
■Menu list
Menu
Picture
22
Item
Adjustments / Configurations (alternatives)
Viewing Mode
Basic picture mode (Dynamic / Normal / Cinema / THX (True Cinema) / Game / Photo
/ Professional1 / Professional2)
In each Viewing Mode and input, Contrast, Brightness, Colour, Sharpness, Tint, Colour
Balance, Vivid Colour, Eco Mode, P-NR and 3D-COMB can be adjusted and stored to
suit your particular viewing requirement.
●Set for each input signal.
Dynamic
: Provides enhanced picture contrast and sharpness when viewing in a
bright room.
Normal
: Recommended for viewing under normal ambient room lighting
conditions.
Cinema
: For watching movies in a darkened room with the improved performance
of contrast, black and colour reproduction
THX
: Precisely reproduces the original quality of the image without any revision.
(True Cinema) Recommended for playback of THX disc (disc with “THX” logo)
THX mode is used to mirror the picture settings used by professional
filmmakers, faithfully reproducing the image quality of THX Certified movies.
●THX Certified movies have the “THX” logo on a disc.
●“True Cinema” is displayed instead of “THX” in the mode of 3D,
PC input, Media Player and Network service operations.
Game
: Fast response signal specifically to provide suitable images for playing
games
●Not valid on TV mode
●A continuous record of time spent using Game mode can be displayed
in the top right of the screen.
“Playing Time Display” (p. 26)
Photo
: Set “Reversal Film” to “On” to provide the suitable image quality for photos
●For HDMI input, Media Player and Network service operations
Professional : Allows you to set the professional picture settings in “Advanced Settings”,
1/2
“Lock Settings” and “Copy Adjustment”
●This mode is available only when “Advance(isfccc)” in the Setup Menu
is set to “On”.
●Not valid on VIERA CAST
●If the certified professional dealer sets these modes, “Professional1”
and “Professional2” may be displayed as “isf Day” and “isf Night”.
Contrast, Brightness,
Colour, Sharpness
Increases or decreases the levels of these options according to your personal preference
Tint
With an NTSC signal source connected to the TV, the picture hue can be adjusted to
suit your taste
●For NTSC signal reception only
Colour Balance
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
●Not valid when “Viewing Mode” is set to “THX (True Cinema)”, “Professional1” or
“Professional2”.
Vivid Colour
Automatically adjusts colours to vivid ones (Off / On)
●Not valid on PC signal.
●Not valid when “Viewing Mode” is set to “Professional1” or “Professional2”.
Reversal Film
Provides the picture effect such as the reversal film (Off / On)
●This function is available when “Viewing Mode” is set to “Photo”.
Eco Mode
Automatic Brightness Control function
Adjusts picture settings automatically dependent on ambient lighting conditions (Off / On)
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the contoured parts of
a picture (Off / Min / Mid / Max)
●Not valid on PC signal.
3D-COMB
Makes still or slow moving pictures look more vivid (Off / On)
●Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen.
Set to “On” to display sharper and more accurate colours.
●For PAL or NTSC signal reception only
●Not valid on RGB, S-Video, Component, PC, HDMI and Media Player
Panel
Turns the screen off when you select “Off” (Off / On)
●The sound is active even if the screen turns off.
●Press any buttons to turn the screen on.
●This function is effective in reducing power consumption when listening to a sound
without watching the TV screen.
Reset to Defaults
Press the OK button to reset the present Picture Viewing Mode of the selected input to
the default settings
Menu
Item
Adjustments / Configurations (alternatives)
Bass
Increases or decreases level to enhance or minimise lower, deeper sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher sound output
Equalizer
Adjusts the frequency level to suit your favourite sound quality
●This function is available when “Mode” is set to “User”.
●Select the frequency and change the frequency level by using the cursor button.
●If you want to enhance the bass sound, raise the level of the lower frequency. If you
want to enhance the treble sound, raise the level of the higher frequency.
●To reset the levels of each frequency to the default settings, select the “Reset to
Defaults” by using cursor button, and then press the OK button.
Balance
Adjusts volume level of right and left speakers
Headphone Volume
Adjusts the volume of the headphones
Surround
Surround sound settings (Off / V-Audio / V-Audio Surround)
V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effects
V-Audio Surround: Provides a dynamic enhancer of width and depth to simulate
improved spatial effects
Volume Correction
Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
●If the back space between the TV and wall is over 30 cm, “Over 30cm” is recommended.
●If the back space between the TV and wall is within 30 cm, “Up to 30cm” is recommended.
MPX
Selects multiplex sound mode (if available)
●Normally: Stereo
●Stereo signal cannot be received: Mono
●M1 / M2: Available while mono signal is transmitted
●Analogue mode only
Audio Preference
Selects the initial setting for audio tracks (Auto / MPEG)
Auto : Automatically selects the audio tracks if programme has more than two tracks.
The priority is given in the following order - Dolby Digital Plus, HE-AAC,
Dolby Digital, MPEG.
MPEG : The priority is given to MPEG as long as the programme contains MPEG audio.
●Dolby Digital Plus and Dolby Digital are the methods of coding digital signals developed by
Dolby Laboratories. Apart from stereo (2ch) audio, these signals can be multi-channel audio.
●HE-AAC is a perceptual coding method used to compress digital audio for efficient
storage and transmission.
●MPEG is an audio compression method that compresses audio to the smaller size
without any considerable loss of audio quality.
●Dolby Digital Plus and HE-AAC are the technologies for HD (High definition) programmes.
●DVB mode only
●How to Use Menu Functions
Sound
Mode
Selects the basic sound mode (Music / Speech / User)
●The selected mode affects all input signals.
Music: Improves sound quality for watching music videos, etc.
Speech: Improves sound quality for watching news, drama, etc.
●Music and Speech modes use CONEQ™ brand equalization technology to improve
sound quality. CONEQ equalizes acoustic power frequency response and corrects
time and phase alignment errors of a speaker system. Speakers with CONEQ perform
as near-perfect electro-acoustic transducers providing true to the original sound with
the highest musically and intelligibility.
●In Music and Speech modes, you can adjust “Bass” and “Treble” settings, and those
settings will be stored for each mode.
User: Adjusts the sounds manually by using the equalizer to suit your favourite sound quality.
●For the User mode, “Equalizer” will appear on the Sound Menu instead of “Bass” and
“Treble”. Select the “Equalizer” and adjust the frequency. “Equalizer” (below)
●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of PC
input, Media Player or Network service operations.
●Only available items can be selected.
23
How to Use Menu Functions
Menu
Item
Sound
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal
(Auto / PCM)
Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.
HE-AAC (48 kHz) 5.1ch is output as DTS.
MPEG is output as PCM.
PCM : Digital output signal is fixed to PCM.
●For DVB mode, Network video contents or Video mode
MPEG Optical Level
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initial
setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●Normally, MPEG sound is larger comparing with the other types of audio track.
●DVB mode only
HDMI1 / 2 / 3 / 4 Input
Select to fit the input signal (Digital / Analogue)
Digital
: HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
●HDMI input mode only
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT terminal if the
sound does not synchronize the image
●DVB mode only
Reset to Defaults
Press the OK button to reset the present Sound Mode, Balance, Headphone Volume
and Surround to the default settings
3D Settings
Adjusts and sets to view 3D images
Timer Programming
Sets a timer to remind watching or record forthcoming programmes
●DVB mode only
Off Timer
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
USB HDD Setup
Registers the connected USB HDD and makes the settings for the recording
Link Settings
Setup
VIERA Link
Sets to use VIERA Link functions (Off / On)
HDMI Content
Type
Adjusts the picture settings according to the content type signal from the connected
equipment via HDMI cable (Off / Auto)
●This function is available if the connected equipment supports HDMI Content Type.
●The content type information will be displayed for several seconds when this function
works.
Q-Link
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2)
●Select the connected terminal to the recorder even it is not compatible with Q-Link.
AV1 / AV2 out
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
●Monitor: Image displayed on screen
●Component, PC and HDMI signals cannot be outputted.
Power on Link
Sets to use Power on Link function (Off / On)
Power off Link
Sets to use Power off Link function (Off / On)
Standby Power
Save
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On)
●This function is available when “VIERA Link” is set to “On” and “Power off Link” is set
to “On”.
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption (Off / On (With reminder) / On (No reminder))
●This function is available when “VIERA Link” is set to “On”.
Download
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
●DVB-S and DVB-C channel settings cannot be downloaded.
Child Lock
24
Adjustments / Configurations (alternatives)
Locks a channel / AV input to prevent access to it
Menu
Item
DVB-S Tuning Menu
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel
Message
Signal Condition
Adjustments / Configurations (alternatives)
Creates list of favourite DVB-S channels
Skips the unwanted DVB-S channels or edits DVB-S channels
Automatically sets the DVB-S channels received in the area
Sets the DVB-S channels manually
Updates DVB-S Channel List while keeping your settings
Selects whether to give a notification message when a new DVB-S channel is found
(Off / On)
Checks the DVB-S signal condition
Antenna System
Sets the antenna system to use plural LNBs for receiving several satellites
(One LNB / MiniDiSEqC / DiSEqC1.0 / Single Cable)
●This TV supports DiSEqC Version 1.0.
LNB Configuration
Selects the satellite for each LNB
Add TV Signal
Adds the TV mode
●This function is available if you skip any modes to tune in “Auto Setup” for first
using the TV.
●To operate, refer to the “Auto Setup” operations for first using the TV (p. 10 and
p. 11).
Creates list of favourite DVB-C channels
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries)
New Channel
Message
Selects whether to give a notification message when a new DVB-C channel is found
(Off / On)
Skips the unwanted DVB-C channels or edits DVB-C channels
Automatically sets the DVB-C channels supplied
Sets the DVB-C channels manually
Updates DVB-C Channel List while keeping your settings
Set to “On” to enable a message to switch to the available service (only available in
Service Replacement some countries) (Off / On)
Signal Condition
Attenuator
Add TV Signal
Checks the DVB-C signal condition
Automatically reduces the DVB-C signal to avoid the interference (Off / On)
Adds the TV mode
●This function is available if you skip any modes to tune in “Auto Setup” for first
using the TV.
●To operate, refer to the “Auto Setup” operations for first using the TV (p. 10 and
p. 11).
DVB-T Tuning Menu
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
Creates list of favourite DVB-T channels
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries)
New Channel
Message
Signal Condition
Selects whether to give a notification message when a new DVB-T channel is found
(Off / On)
Add TV Signal
Skips the unwanted DVB-T channels or edits DVB-T channels
●How to Use Menu Functions
DVB-C Tuning Menu
Setup
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
Automatically sets the DVB-T channels received in the area
Sets the DVB-T channels manually
Updates DVB-T Channel List while keeping your settings
Checks the DVB-T signal condition
Adds the TV mode
●This function is available if you skip any modes to tune in “Auto Setup” for first
using the TV.
●To operate, refer to the “Auto Setup” operations for first using the TV (p. 10 and
p. 11).
●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of PC
input, Media Player or Network service operations.
●Only available items can be selected.
25
How to Use Menu Functions
Menu
Item
Adjustments / Configurations (alternatives)
Analogue Tuning Menu
Channel List
Skips the unwanted Analogue channels or edits Analogue channels
Auto Setup
Automatically sets the Analogue channels received in the area
Manual Tuning
Sets the Analogue channels manually
Add TV Signal
Adds the TV mode
●This function is available if you skip any modes to tune in “Auto Setup” for first
using the TV.
●To operate, refer to the “Auto Setup” operations for first using the TV (p. 10 and
p. 11).
OSD Language
Changes language for on screen displays
Language
Selects the first and second preferred language for DVB multi audio (depending on
Preferred Audio 1 / 2 the broadcaster)
Setup
Display Settings
Preferred Subtitles
1/2
Selects the first and second preferred language for DVB subtitles (depending on the
broadcaster)
Preferred Teletext
Selects the preferred language for DVB teletext service (depending on the broadcaster)
Preferred Subtitle
Type
Selects the preferred subtitle type (Standard / Hard of Hearing)
●“Hard of Hearing” provides aids in understanding and enjoyment with DVB
subtitles (depending on the broadcaster).
●“Preferred Subtitles 1 / 2” in “Language” are given priority.
Teletext
Teletext display mode (TOP (FLOF) / List)
Teletext Character
Set
Selects teletext language (West / East1 / East2)
●West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc.
●East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc.
●East2: Czech, Hungarian, Lettish, Polish, Rumanian, etc.
Side Panel
Increases the brightness of the side panel (Off / Low / Mid / High)
●The recommended setting is “High” to prevent panel “image retention”.
Default Guide
Selects the default TV Guide type when the GUIDE button is pressed
(TV Guide / Channel List)
TV Guide : Electronic Programme Guide (EPG) is available.
Channel List : EPG is not available and the channel list will appear instead of it.
Input Labels
Labels or skips each input terminal
Banner Display
Timeout
Sets how long the Information banner stays on screen
(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)
Set to “On” to display a continuous record of time spent using Game mode
Playing Time Display every 30 mins (Off / On)
●This function is available when “Game” is selected in “Viewing Mode” (p. 22).
Radio Mode
26
Sets the timer for turning off the screen automatically when a radio channel is selected
(Off / 5 / 10 / 15 / 20 seconds)
●The sound is active even if the screen turns off.
●Press any buttons except Volume Up / Down and Sound Mute buttons to turn the
screen on.
●This function is effective in reducing power consumption when listening to a radio
channel.
Common Interface
Uses include to watch pay-TV
Network Setup
Sets the network setting to use in your network environment
DivX® VOD
Displays DivX VOD registration code
Menu
Item
Advance(isfccc)
System Menu
USB Keyboard
Layout
Adjustments / Configurations (alternatives)
Enables the advanced picture settings (Off / On)
●Set to “On” to enable the mode of “Professional1” and “Professional2” in
“Viewing Mode”.
●Set to “On” to display the advanced items in the Picture Menu - “Advanced
Settings”, “Lock Settings” and “Copy Adjustment”. “Copy Adjustment” will be
displayed when “Viewing Mode” is set to “Professional1” or “Professional2”.
●“isfccc” is the picture setting for the certified professional dealer. For details,
consult your local dealer.
Selects the language that your USB Keyboard supports
●Use a USB Keyboard to enter characters in VIERA CAST.
●Characters may not be displayed correctly on the TV screen depending on the
connected keyboard or the keyboard layout setting.
Resets all settings, for example, when moving house
System Update
Downloads new software to TV
Software Licence
Displays the software licence information
System Information
Displays the system information of this TV
AV Colour System
Selects optional colour system based on video signals in AV mode
(Auto / PAL / SECAM / M.NTSC / NTSC)
Performs the update of the GUIDE Plus+ schedule and advertising informations for
the GUIDE Plus+ system
Sets your postcode to display advertisements in the GUIDE Plus+ system
GUIDE Plus+
Settings
Shipping Condition
Update
Postcode
System
Information
Intelligent Frame
Creation
3D 24p Film Display
Other Settings
Super Resolution
Auto Standby
Power Save
16:9 Overscan
Time Zone
DVI Input Setting
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth and clear (Off / On)
●This function is not available for selection (default to “Off”) when “Viewing Mode” is
set to “Game” or in the mode of 3D, PC input, photo or Network service operations.
Automatically compensates the picture frame rate to make the 24p source movie
images smooth (Off / On)
●This is available only for 24p signal input and displayed instead of
“Intelligent Frame Creation”.
●This function is not available for selection (default to “Off”) when “Viewing Mode”
is set to “Game”, when “3D Picture Format” is set to “2D→3D” in “3D Settings” or
in the mode of PC input, photo or Network service operations.
Reduces juddering noises of the 3D images (Off / On)
●Set to “On” for the cinema-like images.
●This function is available for the 3D-compatible 24p source movie.
Enhances the picture resolution to make the image sharper (Off / Mid / Max)
●This function is available for SD (Standard definition) signal.
●As for HD (High definition) signal, this function is available when aspect mode is
set to 16:9 (16:9 Overscan is set to “On”), 4:3 Full or Zoom.
●Not valid on 3D, PC, VIERA CAST and Media Player
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times (Off / 2 / 4 hours)
●Starting Timer Programming automatically does not affect this function.
●Automatic input switching with the connected equipment affects this function and
time-count will be reset.
●The notification message will appear 3 minutes before going to Standby mode.
●How to Use Menu Functions
Setup
24p Smooth Film
Displays the system information of the GUIDE Plus+ system
Reduces brightness of picture to economise on power consumption (Off / On)
Selects the screen area displaying the image (Off / On)
On : Enlarged the image to hide the edge of the image.
Off : Displayed the image in the original size.
●Set to “On” if noise is generated on the edge of the screen.
●This function is available when aspect is set to Auto (16:9 signal only) or 16:9.
●This function can be memorized separately for SD (Standard definition) and HD
(High definition) signals.
Adjusts the time data
●The time data will be corrected based on GMT.
●Set to “Auto” to adjust the time automatically according to your area.
Changes the black level in the image for HDMI input mode with DVI input signal
manually (Normal / Full)
●When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select “Full”.
●The black level for HDMI input signal will be adjusted automatically.
●For HDMI input mode with DVI input signal only
●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of PC
input, Media Player or Network service operations.
●Only available items can be selected.
27
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products
and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products
and used batteries, please take them to applicable collection points, in accordance with your national legislation and the
Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local municipality, your
waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or
dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the
Directive for the chemical involved.
Power Source
Rated Power Consumption
On mode Average
Power Consumption
on IEC 62087 Ed.2
( based
)
measurement method
Standby Power Consumption
AC 220-240 V, 50 / 60 Hz
335 W
143 W
0.40 W
32.00 W (With monitor out recording)
●This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024
Notice for DVB functions
This TV is designed to meet the standards (current as of August, 2009) of DVB-T (MPEG2 and
MPEG4-AVC(H.264)) digital terrestrial services, DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital
cable services and DVB-S (MPEG2 and MPEG4-AVC(H.264)) digital satellite services.
Consult your local dealer for availability of DVB-T or DVB-S services in your area.
Consult your cable service provider for availability of DVB-C services with this TV.
●This TV may not work correctly with the signal which does not meet the standards of DVB-T,
DVB-C or DVB-S.
●Not all the features are available depending on the country, area, broadcaster, service provider
and satellite.
●Not all CI modules work properly with this TV. Consult your service provider about the
available CI module.
●This TV may not work correctly with CI module that is not approved by the service provider.
●Additional fees may be charged depending on the service provider.
●The compatibility with future DVB services is not guaranteed.
●Check the latest information on the available services at the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of
your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
M0610-1070
Web Site : http://panasonic.net
© Panasonic Corporation 2010
Printed in Czech Republic

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement