Panasonic TXP42XT50E Operating Instructions

Model No.
TX-P42XT50E
TX-P50XT50E
Operating Instructions
Plasma Television
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and
retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your
local Panasonic dealer for assistance.
English
TQB0E2190U
Do not display any still part of the image for a long period
In such cases the still part of the image remains dimly on the plasma screen (“image retention”). This is not
considered a malfunction and is not covered by the warranty.
Typical still image parts:
● Channel number, channel logo and other logos
● Still or moving pictures viewed in 4:3 or 14:9 aspect ratio
● Video games
● Images from PC
To avoid image retention, the contrast is lowered automatically and the screen becomes dim after a few minutes if
no signals are sent or no operations are performed. (p. 97)
Notice for DVB / Data broadcasting / IPTV functions
2
● This TV is designed to meet the standards (as of August, 2011) of DVB-T (MPEG2 and MPEG4-AVC(H.264)) digital
terrestrial services and DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital cable services.
Consult your local dealer for availability of DVB-T services in your area.
Consult your cable service provider for availability of DVB-C services with this TV.
● This TV may not work correctly with the signal which does not meet the standards of DVB-T or DVB-C.
● Not all the features are available depending on the country, area, broadcaster, service provider and network
environment.
● Not all CI modules work properly with this TV. Consult your service provider about the available CI module.
● This TV may not work correctly with CI module that is not approved by the service provider.
● Additional fees may be charged depending on the service provider.
● The compatibility with future services is not guaranteed.
● Check the latest information on the available services at the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
Panasonic does not guarantee operation and performance
of peripheral devices made by other manufacturers; and we
disclaim any liability or damage arising from operation and/
or performance from usage of such other maker’s peripheral
devices.
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode AVC Video that
was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video
provider licensed to provide AVC Video. No license is granted
or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
Contents
Be Sure to Read
Safety Precautions ···············································4
Quick Start Guide
Accessories / Options ···········································6
Identifying Controls ·············································10
Basic Connection················································12
Auto Setup ··························································15
Rovi Corporation and/or its subsidiaries and related affiliates
are not in any way liable for the accuracy or availability of the
program schedule information or other data in the GUIDE
Plus+/Rovi Guide system and cannot guarantee service
availability in your area. In no event shall Rovi Corporation
and/or its related affiliates be liable for any damages in
connection with the accuracy or availability of the program
schedule information or other data in the GUIDE Plus+/Rovi
Guide system.
Enjoy your TV!
“Full HD 3D Glasses™” Logo indicates compatibility between
TV products and 3D Eyewear which are compliant with the
“Full HD 3D Glasses™” format, and does not indicate picture
quality of TV products.
Watching External Inputs ····································29
Basic
Using “VIERA Connect” ······································19
Watching TV ·······················································20
Using TV Guide ··················································24
Viewing Teletext ··················································27
Viewing 3D images ·············································31
How to Use VIERA TOOLS ································36
How to Use Menu Functions ······························37
Advanced
Retuning from Setup Menu·································46
Tuning and Editing Channels ·····························48
Timer Programming ············································52
Child Lock ···························································55
Using Data Service Application ··························56
Using Common Interface ····································57
Shipping Condition ·············································58
Updating the TV Software ··································59
Using Media Player ············································60
Using Network Services (DLNA / VIERA Connect)
············································································69
Link Functions (Q-Link / VIERA Link) ·················79
External Equipment ············································87
Others
Technical Information··········································90
FAQs···································································97
Maintenance ·····················································100
Licence ·····························································100
Specifications ···················································102
3
Safety Precautions
Warning
Safety Precautions
Handling the mains plug and lead
● Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)
● Ensure that the mains plug is easily accessible.
● Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.
• An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing
connection.
● Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
● Do not use any mains lead other than that provided with this TV. (This may cause fire or electrical shock.)
● Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
• Do not move the TV with the lead plugged in the socket outlet.
• Do not place a heavy object on the lead or place the lead near a high-temperature object.
• Do not twist the lead, bend it excessively or stretch it.
• Do not pull on the lead. Hold onto the mains plug body when disconnecting the lead.
• Do not use a damaged mains plug or socket outlet.
If you find any abnormality,
remove the mains plug
immediately!
AC 220-240 V
50 / 60 Hz
Power source
Do not expose to rain or excessive
moisture
● This TV is designed to operate on AC 220-240 V,
50 / 60 Hz.
Do not remove covers and NEVER
modify the TV yourself
● Do not remove the rear cover as live parts are
accessible when it is removed. There are no user
serviceable parts inside. (High-voltage components
may cause serious electrical shock.)
● Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
Do not expose to direct sunlight and
other sources of heat
● Avoid exposing the TV to direct sunlight and other
sources of heat.
To prevent the spread
of fire, keep candles
or other open flames
away from this product
at all times
● To prevent damage which might result in electric shock
or fire, do not expose this TV to rain or excessive
moisture. This TV must not be exposed to dripping or
splashing water and objects filled with liquid, such as
vases, must not be placed on top of or above the TV.
Do not insert foreign objects into the TV
● Do not allow any objects to drop into the TV through
the air vents. (Fire or electrical shock may result.)
Do not place the TV on sloped or
unstable surfaces, and ensure that the
TV does not hang over the edge of the
base
● The TV may fall off or tip over.
Use only the dedicated pedestals /
mounting equipment
● Using an unapproved pedestal or other fixtures may
make the TV unstable, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
● Use approved pedestals (p. 7) / wall-hanging brackets
(p. 6).
Do not allow children to handle SD Card
● As with any small object, SD Cards can be
swallowed by young children. Please remove SD
Card immediately after use and store out of reach of
children.
4
Radio waves
Caution
When cleaning the TV, remove the mains
plug
● Cleaning an energized TV may cause electrical shock.
When the TV is not going to be used for
a long period of time, remove the mains
plug
● This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to a
live socket outlet.
Do not block the rear air vents
● Blocked ventilation by newspapers, table cloths,
curtains, etc. may cause overheating, fire or electrical
shock.
Do not expose your ears to excessive
volume from the headphones
● Irreversible damage can be caused.
Do not apply strong force or impact to the
display panel
Transport only in upright position
● This may cause damage resulting in injury.
● Transporting the TV with its display panel facing upward
or downward may cause damage to the internal circuitry.
The TV is heavy. Handle the TV by 2 or
more people. Support as shown to avoid
injury by the TV tipping or falling.
Allow sufficient space around the TV for
radiated heat
Minimum distance
10
10
10
Safety Precautions
● Do not use the TV in any medical institutions or locations with medical equipment. Radio waves from the TV may
interfere with the medical equipment and cause accidents due to the malfunction.
● Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves
from the TV may interfere with the automatic control equipment and cause accidents due to the malfunction.
● Keep the distance at least 22 cm from the TV when you have a cardiac pacemaker. Radio waves from the part
may interfere with the operation of the pacemaker.
● When using the
pedestal, keep the
space between the
bottom of the TV and
7
the surface where the
TV is set.
● In case of using
(cm) Wall-hanging bracket,
follow the manual of it.
Bluetooth® wireless technology
● The TV uses the 2.4 GHz radio frequency ISM band (Bluetooth®). To avoid malfunctions or slow response caused
by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, other Bluetooth
devices, microwaves, mobile phones and the devices that use 2.4 GHz signal.
5
Accessories / Options
Standard accessories
Batteries for the
Remote Control (2)
● R6
(p. 7)
Pedestal
(p. 7)
Mains lead
(p. 12)
Ferrite core
for LAN cable (2)
(Large size)
(p. 14)
Ferrite core
for USB cable (2)
(Middle size)
(p. 95)
Ferrite core
for headphones
(Small size)
(p. 88)
Operating Instructions
Quick Start Guide
Remote Control
● N2QAYB000752
Accessories / Options
Pan European Guarantee
Card
Use the Ferrite cores to comply with the EMC standard.
● Accessories may not be placed all together. Take care not to throw them away unintentionally.
● This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
Optional accessories
Please contact your local Panasonic dealer to purchase the recommended optional accessories. For additional details,
please read the manual of the optional accessories.
Wall-hanging bracket
● TY-WK4P1RW
● Tilting angle for this TV: 0 (vertical) to 15 degrees
Rear of the TV
Depth of screw: minimum 17 mm,
maximum 35 mm
Diametre: M8
Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
400 mm
300 mm
(View from the side)
Holes for wall-hanging bracket installation
Warning
● Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of personal injury and
product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a
licensed contractor to secure the wall-hanging brackets. Any damage caused by installing without a qualified installer
will void your warranty.
● Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to prevent
the TV from falling off.
● Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
● Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall
before hanging bracket.
● To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
6
3D Eyewear
● TY-ER3D4ME
● TY-ER3D4SE
● If you need 3D Eyewears, please purchase this optional accessory.
● Use Panasonic 3D Eyewear supporting Bluetooth wireless technology.
● For more information (English only):
http://panasonic.net/avc/viera/3d/eu.html
Wireless Adaptor for VIERA
● TY-WL20E
Caution
Communication Camera
● TY-CC20W
● This camera can be used on VIERA Connect (p. 19, 78).
● Depending on the area, this optional accessory may not be available.
For details, consult your local Panasonic dealer.
1
Caution
Pull Open
Hook
2
Close
● Incorrect installation may cause battery leakage and corrosion,
resulting in damage to the remote control.
● Do not mix old and new batteries.
● Do not mix different battery types (such as alkaline and manganese
batteries).
● Do not use rechargeable (Ni-Cd) batteries.
● Do not burn or break up batteries.
Batteries must not be exposed to excessive heat such as sunshine,
fire or the like.
● Do not disassemble or modify the remote control.
Accessories / Options
Installing / removing remote’s batteries
Quick Start Guide
● To use the Wireless Adaptor, an access point needs to be obtained.
● Depending on the area, this optional accessory may not be available.
● Additional information for Wireless Adaptor and access point may be on the following
website. (English only)
http://panasonic.jp/support/global/cs/tv/
Note the correct
polarity (+ or -)
Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than the one provided with this TV.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
● If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
● If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
● If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
● If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure. (p. 9)
● Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
7
Assembly screw (5)
(black)
Bracket
● TBL5ZA3238
Cover
● TXFBL5Z0073
M4 × 10
Assembly screw (7)
(silver)
Base
● TBL5ZX0293
(TX-P42XT50E)
● TBL5ZX0295
(TX-P50XT50E)
Neck
● TXFBL5Z0072
Quick Start Guide
M5 × 16
■ Assembling the pedestal
1
Insert the tabs of the neck
firmly
into the base
2
Turn the base over and fix the neck securely
with assembly screws
● Do not hold the neck when turning over the base.
Accessories / Options
Tabs (bottom)
B
D
Screw hole
F
F
Back of the base
3
Attach the bracket to the tabs of the neck
and fix with assembly screws
4
Attach the cover
screw
B
and fix securely with assembly
A
Tabs (top)
E
C
D
■ Securing the TV
Use the assembly screws to fasten securely.
● Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
● Carry out the work on a horizontal and level surface.
Arrow mark
A
Hole for pedestal
installation
8
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screw from the cover.
4 Remove the assembly screws from the bracket.
5 Remove the assembly screws from the back of the base and pull out the neck.
Screw hole
Accessories / Options
Screw (not supplied)
Diametre: 3 mm
Length: 25 - 30 mm
Quick Start Guide
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
● The place where the pedestal is to be fixed should be thick enough and made of hard material.
9
Identifying Controls
Remote Control
8 OK
Quick Start Guide
Identifying Controls
1
2
3
4
5
6
7
17
18
19
9
20
10
8
21
9
22
10
11
12
23
24
16
11
12
13
13
14
14
25
15
26
15
16
17
27
18
19
20
21
22
1 Standby On / Off switch
2
3
4
5
6
7
10
● Switches TV on or off standby.
3D button (p. 33)
● Switches the viewing mode between 2D and 3D.
[Main Menu] (p. 37)
● Press to access Picture, Sound, Network, Timer
and Setup Menus.
Aspect
(p. 23)
● Changes aspect ratio.
Information (p. 21)
● Displays channel and programme information.
VIERA TOOLS (p. 36)
● Displays some special feature icons and accesses
easily.
INTERNET ([VIERA Connect]) (p. 19, 78)
● Displays VIERA Connect home screen.
23
24
25
26
27
● Confirms selections and choices.
● Press after selecting channel positions to quickly
change channel.
● Displays the Channel List.
[Option Menu] (p. 22)
● Easy optional setting for viewing, sound, etc.
Coloured buttons
(red-green-yellow-blue)
● Used for the selection, navigation and operation of
various functions.
Teletext
(p. 27)
● Switches to teletext mode.
Subtitles (p. 21)
● Displays subtitles.
Numeric buttons
● Changes channel and teletext pages.
● Sets characters.
● When in Standby mode, switches TV on (Press for
about 1 second).
Sound Mute
● Switches sound mute on or off.
Volume Up / Down
Input mode selection
● TV - switches DVB-C / DVB-T / Analogue mode.
(p. 20)
● AV - switches to AV input mode from Input
Selection list. (p. 29)
Surround
(p. 40)
● Switches surround sound setting.
Normalise
(p. 37)
● Resets picture and sound settings to their default
levels.
Exit
● Returns to the normal viewing screen.
TV Guide (p. 24)
Cursor buttons
● Makes selections and adjustments.
Return
● Returns to the previous menu / page.
Hold
● Freezes / unfreezes the picture. (p. 22)
● Holds the current teletext page (teletext mode).
(p. 27)
Index (p. 27)
● Returns to the teletext index page (teletext mode).
Last view
(p. 23)
● Switches to previously viewed channel or input
mode.
Channel Up / Down
Operations for contents, connected equipment,
(p. 30, 61, 75, 85)
etc.
Indicator / Control panel
1 Function select
1
2
3
5
6
7
4
Rear side of the TV
7 Power and Timer LED
Identifying Controls
Red: Standby
Green: On
Orange: Timer Programming On
Orange (flash):
Recording of Timer Programming or Direct TV
Recording in progress
Red with orange flash:
Standby with Timer Programming On or Direct
TV Recording
● The LED blinks when the TV receives a command
from the remote control.
Quick Start Guide
● [Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass]∗ /
[Treble]∗ / [Balance] / [Auto Setup] (p. 46, 47)
∗[Music] or [Speech] mode in the Sound Menu
2 Channel Up / Down, Value change (when using the
F button), Switching the TV on (press either button
for about 1 second when in Standby mode)
3 Changes the input mode
4 Mains power On / Off switch
● Use to switch the mains power.
If you turned the TV off during Standby mode
by the remote control last time, the TV will be
in Standby mode when you turn the TV on with
Mains power On / Off switch.
When pressing the control panel button (1 - 4), the
control panel guide appears on the left side of the
screen for 3 seconds to highlight the pressed button.
5 Remote control signal receiver
● Do not place any objects between the TV remote
control signal receiver and remote control.
6 C.A.T.S. (Contrast Automatic Tracking System)
sensor
● Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
(p. 38)
Using the On Screen Displays - Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
■ Operation guide
■ How to use remote control
Operation guide will help you to operate by using the
remote control.
Example: [Sound Menu]
Main Menu
Mode
Picture Bass
1/2
Move the cursor / select from a range of options /
select the menu item (up and down only) / adjust
levels (left and right only)
0
0
0
11
Access the menu / store settings after adjustments
have been made or options have been set
Music
Treble
Sound Balance
Headphone Volume
Network
Off
Surround
Off
Auto Gain Control
Timer
Volume Correction
Speaker Distance to Wall Over 30cm
Open the main menu
0
Return to the previous menu
Setup
Select
EXIT
Change
RETURN
Selects your favourite sound
mode.
Page up
Page down
Exit the menu system and return to the normal
viewing screen
Operation guide
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
• No signal is received and no operation is performed for 30 minutes in Analogue TV mode.
• [Off Timer] is active in the Timer Menu. (p. 22)
• No operation is performed for the period selected in [Auto Standby] (p. 42).
● This function does not affect the recording of Timer Programming and Direct TV Recording.
11
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
There are some restrictions on placement for viewing 3D images. For details (p. 31, 32)
Terminals
5
Quick Start Guide
6
Basic Connection
9
1
2
7
3
8
4
10
1
2
3
4
5
6
7
8
9
10
SD Card slot (p. 60)
CI slot (p. 57)
Headphone jack
(p. 88)
USB 1 / 2 port
(p. 60, 87)
ETHERNET (p. 14)
DIGITAL AUDIO OUT
(p. 88)
AV1 (SCART) (p. 13)
AV2 (COMPONENT / VIDEO) (p. 87)
Terrestrial / cable terminal (see below)
HDMI1 / 2
(p. 13, 87)
Connections
Mains lead and aerial
Terrestrial aerial
■ DVB-C, DVB-T, Analogue
Cable
RF cable
Mains lead
■ Mains lead
To remove from the TV:
tabs
AC 220-240 V
50 / 60 Hz
Push until both side
tabs click
12
Make sure that
the mains lead is
securely fixed.
Press both tabs and pull
on mains connector to
release
AV devices
■ Player / 3D compatible player
TV
HDMI cable
Player /
3D-compatible player
Terrestrial aerial
Cable
Basic Connection
RF cable
Quick Start Guide
■ DVD Recorder / VCR
TV
RF cable
SCART cable
DVD Recorder / VCR
■ DVD Recorder / VCR and Set top box
TV
Set top box
HDMI cable
Terrestrial
aerial
SCART cable
RF cable
RF Cable
SCART cable
DVD Recorder / VCR
Note
● Connect to the TV’s AV1 for a DVD Recorder / VCR supporting Q-Link (p. 81).
● Q-Link and VIERA Link connection (p. 79, 80)
● Please also read the manual of the equipment being connected.
● Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
● When using a SCART or HDMI cable, use the fully wired one.
● Check the type of terminals and cable plugs are correct when connecting.
13
Network
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network
environment.
● If you do not have any broadband network services, please consult your retailer for assistance.
● Prepare the internet environment for wired connection or wireless connection.
● Setup of the network connection will start after the tuning (when first using the TV).
(p. 16 - 18)
■ Wired connection
Quick Start Guide
LAN cable (Unshielded)
● Use the Unshielded Twist Pair (UTP) LAN cable.
TV
∗Less than 10 cm
Internet environment
Ferrite core - Large size (supplied)
Basic Connection
Installing the Ferrite core
Pull back the tabs
(in two places)
Wind the cable twice
Close
■ Wireless connection
TV
Access point
Internet environment
Wireless Adaptor
“Optional accessories” (p. 7)
● Connect to the USB 1 or 2 port.
14
Auto Setup
Search and store TV channels automatically.
● These steps are not necessary if the setup has been completed by your local dealer.
● Please complete connections (p. 12 - 14) and settings (if necessary) of the connected equipment before starting Auto
Setup. For details of settings for the connected equipment, read the manual of the equipment.
Plug the TV into mains socket and switch on
2
Select the language
Menüsprache
Deutsch
English
Français
Italiano
Español
Português
Nederlands
Polski
Srpski
čeština
Hrvatski
Magyar Slovenščina
Slovenčina Latviešu
Български eesti keel
Română
Lietuvių
set
Select your country
select
Country
Germany
Austria
France
Italy
Spain
Portugal
Switzerland
Malta
Andorra
4
select
Dansk
Svenska
Norsk
Suomi
Türkçe
Еλληνικά
Auto Setup
3
● Takes a few seconds to be displayed.
● If the red LED shows on the TV, press the Standby On / Off switch on the
remote control for about 1 second.
Denmark
Sweden
Norway
Finland
Luxembourg
Belgium
Netherlands
Turkey
Greece
Poland
Czech
Hungary
Slovakia
Slovenia
Croatia
Estonia
Lithuania
Others
set
● Depending on the country you select,
select your Region or store the Child LockPIN number (“0000” cannot be stored) by
following the on-screen instructions.
Select the mode to tune
TV Signal Selection
DVB-C
DVB-T
Analogue
Start Auto Setup
5
Quick Start Guide
1
select
tune / skip tuning
: tune (search for the available channels)
: skip tuning
Select [Start Auto Setup]
TV Signal Selection
DVB-C
DVB-T
Analogue
Start Auto Setup
select
access
● Auto Setup will start to search for TV channels and store them.
The stored channels and sorted channel order vary depending on the country, area,
broadcasting system and conditions of signal reception.
Auto Setup screen varies depending on the country you select.
15
5
1 [DVB-C Network Settings]
● Depending on the country you select, select your cable provider beforehand by following the on-screen
instructions.
select [Start Auto Setup]
DVB-C Network Settings
Frequency
Network ID
Auto
Auto
Start Auto Setup
access
Normally set [Frequency] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter [Frequency] and [Network ID] specified by your cable provider
with numeric buttons.
Quick Start Guide
2 [DVB-C Auto Setup]
3 [DVB-T Auto Setup]
DVB-C Auto Setup
DVB-T Auto Setup
Progress
0%
100%
This will take about 3 minutes.
No.
Channel Name
CBBC Channel
1
BBC Radio Wales
2
E4
3
Free TV: 3
Type
Free TV
Free TV
Free TV
Pay TV: 0
Searching
Quality
100
100
100
CH 5
Progress
This will take about 3 minutes.
CH
Channel Name
CBBC Channel
62
BBC Radio Wales
62
E4
62
62
Cartoon Nwk
Free TV: 4
Radio: 0
69
Quality
100
100
100
100
Type
Free TV
Free TV
Free TV
Free TV
Pay TV: 0
Searching
Radio: 0
Auto Setup
● Depending on the country you select, the channel selection screen
will be displayed after DVB-T Auto Setup if multiple channels have
the same logical channel number. Select your preferred channel or
exit the screen for automatic selections.
4 [Analogue Auto Setup]
5 Preset Download
Analogue Auto Setup
CH 2
Scan
This will take about 3 minutes.
CH
CH 29
CH 33 BBC1
78 CC 1
41
Channel Name
If Q-Link, VIERA Link or similar technology (p. 81, 82) compatible
recorder is connected, channel, language and country / region
settings are automatically downloaded to the recorder.
Sending Preset Data
Please wait!
0%
Remote control unavailable
Analogue: 2
Searching
100%
● If downloading has failed, you can download later through the
Setup Menu. [Download] (p. 43)
6
Setup the network connection
Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 19, 69).
● To setup the wireless connection, the Wireless Adaptor (optional accessory) is required. Please note that this
TV does not support wireless public access points.
● Ensure the network connections (p. 14) and network environment are completed before starting setup.
Select the network type
[Wired] “Wired connection” (p. 14)
Network Setup
[Wireless] “Wireless connection” (p. 14)
Select Wired or Wireless
Wired
Wireless
Set later
select
access
● To setup later on or skip this step
Select [Set later] or
■ [Wired]
1. Select [Auto]
Acquire IP Address
Auto
select
access
2. Go to the next step
(Press twice)
16
Connection Test
Manual
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Automatically setup is done and the test of the
network connection starts.
● To set manually, select [Manual] and set each item.
For details (p. 72)
: succeeded
The test is successful
and the TV is
connected to the
network.
: failed
Check the settings and
connections. And then
select [Retry].
6
■ [Wireless]
Access points found automatically are listed.
1. Select your desired access point
select
Available Wireless Networks
No.
1
2
3
Network Name(SSID)
Access Point A
Access Point B
Access Point C
Wireless type
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Status
access
● For [WPS(Push button)] (p. 18)
(red)
: Encrypted access point
(blue)
2. Access the encryption key input mode
Encryption Key Setting
Please input the encryption key.
● If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the encrypted
access point.
Encryption key
3. Enter the encryption key of the access point
Set characters
Wireless Network Settings
Encryption key
A B C D E F G H
U V W X Y Z
I
J
K
L M N O P Q R S T
0
1
2
3
4
5
6
7
8
9
!
:
a
b
c
d
e
f
g
h
i
j
k
l
m n
o
p
q
r
s
t
u
v
w
x
y
z
(
)
+
-
.
*
_ @ /
“
‘
% &
?
,
;
=
$
[
]
~
<
>
{
}
|
`
#
Auto Setup
Connection will be made with the following settings:Network Name(SSID) : Access Point A
Security type : WPA-PSK
Encryption type : TKIP
Quick Start Guide
● For the information of the highlighted ● To set manually (p. 74)
access point
(yellow)
● To search access points again
Store
select
set
● You can set characters by using numeric
buttons.
4. After the access point setting is finished, perform the connection test
^
\
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections. And then select
[Retry].
● To set manually, select [Manual] and set each item.
For details (p. 72)
5. Go to the next step
(Press twice)
17
6
[WPS(Push button)]
1. Press the WPS button on the access point until the light flashes
2. Connect the Wireless Adaptor and the access point
WPS(Push button)
1) Please press the ‘WPS’ button on the wireless
access point until its light flashes.
2) When the light is flashing select ‘Connect’ on
TV.
Quick Start Guide
If you are unsure, please check the instruction
manual of the wireless access point.
Connect
● Ensure that your access point supports WPS for this setup.
● WPS: Wi-Fi Protected Setup™
● If the connection has failed, check the settings and positions of
your access point. And then, follow the on-screen instructions.
3. After the access point setting is finished, perform the connection test
: succeeded
The test is successful and the TV is connected to the
network.
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Auto Setup
: failed
Check the settings and connections. And then select
[Retry].
● To set manually, select [Manual] and set each item.
For details (p. 72)
4. Go to the next step
(Press twice)
7
Select [Home]
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
Home
Shop
select
set
■ [Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
● You can return to viewing environment selection screen at the stage of Shop confirmation screen.
1 Return to viewing environment
selection screen
Shop
2 Select [Home]
Please select your viewing environment.
Home
select
set
Shop
You have selected shop mode
To change viewing environment later on, you will need to initialise all settings by accessing Shipping
Condition.
[Shipping Condition] (p. 58)
Auto Setup is now complete and your TV is ready for viewing.
If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.
Note
● To check the channel list “Using TV Guide” (p. 24)
● To edit or hide (skip) channels “Tuning and Editing Channels” (p. 48 - 51)
● To retune all channels [Auto Setup] (p. 46, 47)
● To add the available TV mode later
[Add TV Signal] (p. 43)
● To initialise all settings
[Shipping Condition] (p. 58)
If you connect the Wireless Adaptor later on, the confirmation screen will
be displayed for the setup.
● To setup the wireless connection (p. 73, 74)
Wireless LAN adaptor connection
Wireless LAN adaptor connected, do you want to
set it up?
No - Exit
Current network connection : Wireless
Yes
18
No
Using “VIERA Connect”
VIERA Connect is a gateway to the internet services unique to Panasonic.
VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents
such as videos, games, communication tools, etc. from VIERA Connect home screen.
● This TV does not support full web browser function and some features of the websites may not be available.
1
Turn power on
● Press for about 1 second.
● Mains power On / Off switch should be on.
(p. 11)
● Every time you turn on the TV, VIERA Connect introduction banner appears. The
banner is subject to change.
Enjoy selected internet content with VIERA Connect.
Simply press the OK / INTERNET button
2
Access VIERA Connect
While the banner is displayed
or
VIERA Connect
● To set the VIERA
Connect introduction
banner display off
[VIERA Connect
Banner] (p. 44)
Using “VIERA Connect”
■ To exit from
● Depending on the usage conditions, it may take a while to read all the data.
● Messages might be displayed before VIERA Connect home screen.
Please read these instructions carefully and follow the on-screen instructions.
Example: VIERA Connect home screen
● To go to the next level, select
[MORE].
● To back to the previous level,
select [BACK].
● To return to VIERA Connect home
screen
MORE
BACK
● Video communication (for example Skype™) requires an exclusive Communication Camera TY-CC20W.
“Optional accessories” (p. 7)
For details, read the manual of the Communication Camera.
● You can connect a keyboard and a gamepad via USB port for character input and playing games in VIERA Connect.
You can also operate the TV with a keyboard or a gamepad other than VIERA Connect features.
For more information “USB connection” (p. 95)
Note
● If you cannot access VIERA Connect, check the network connections (p. 14) and settings (p. 16 - 18).
● For more information of VIERA Connect (p. 78)
19
Watching TV
1
Turn power on
● Press for about 1 second.
● Mains power On / Off switch should be on. (p. 11)
■ VIERA Connect introduction banner appears
Every time you turn on the TV, this banner appears at the bottom of the
screen.
You can access to VIERA Connect easily and enjoy the various
contents.
(p. 19)
● To remove this banner, leave for about 5 seconds or press any
buttons (except the buttons to access VIERA Connect).
● To set this banner display off
[VIERA Connect Banner] (p. 44)
● The banner is subject to change.
2
Select the mode
● The selectable modes vary depending on the
stored channels (p. 15).
select
Watching TV
TV Selection
DVB-C
DVB-T
Analogue
3
Volume
access
● You can also select the mode pressing the TV
button repeatedly on the remote control or the
TV (p. 11).
● If [TV Selection] menu is not displayed, press
the TV button to switch the mode.
Select a channel
● To select a more than two-digit channel
position number, e.g. 399
up
or
down
■ To select from the Channel List
All DVB-T Channels
6
7
8
1
2
3
4
select channel
Sorting 123...
Cartoon Nwk
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
BBCi
CBBC Channel
watch
● To sort channel names in
alphabetical order
(red)
● To change the category
(blue)
■ To select a channel using Information banner (p. 21)
1 Display Information banner if it is not displayed
2 While the banner is displayed, select the channel
select channel
watch
■ To select a channel using TV Guide (p. 24)
1 Display TV
Guide
2 Select the current
programme or channel
select
3 Select [View] (DVB)
Das Erste
19:30- 20:00
access
View
Timer Programming
select
watch
● The postcode entry or update may be required depending on the country you select (p. 15). Follow the on-screen
instructions.
Note
● To watch pay-TV
20
“Using Common Interface” (p. 57)
Other useful functions
Display Information banner
Display Information banner
● Also appears when changing a channel.
1
2
3
5
6
7
4
Example: DVB
HDTV
1
ZDF
Bad signal
45
Dolby D+
1 Channel position and name
2 Channel type ([Radio], [Data], [HDTV], etc.) /
Encrypted channel (
TV mode ( , , )
3 Programme
4 Current time
20:35
All DVB-T Channels
Change category
C
Coronation
Street
20:00 - 20:55
2
Now
Info
)/
5 Programme Start / Finish time (DVB)
Channel number, etc. (Analogue)
6 Progress time indicator of the selected programme
(DVB)
7 Category
● To change the category (DVB)
(blue)
select
Features available / Message meanings
Sound mute on
[Bad signal]
Poor TV signal quality
[Dolby D+], [Dolby D], [HE-AAC]
Dolby Digital Plus, Dolby Digital or
HE-AAC audio track
Subtitle service available
Teletext service available
Multiple audio available
Multiple video available
[Stereo], [Mono]
Audio mode
Watching TV
set
Data service (Hybrid Broadcast
Broadband TV application)
available (p. 56)
1 - 90
Off Timer remaining time
● For settings (p. 22)
Multiple audio and video available
● To confirm another tuned channel
name
● To watch the channel listed in the
banner
● Information on the next programme
(DVB)
● To hide
● Extra information (DVB)
● To set display timeout
[Banner Display Timeout] (p. 44)
(Press again to hide the banner)
Display subtitles
Display / hide subtitles (if available)
● To change the language for DVB (if available)
[Preferred Subtitles] (p. 43)
Note
● If you press this button in Analogue mode, it switches to teletext service and calls up a favourite page (p. 27). Press
the EXIT button to return to TV mode.
● Subtitles may not be displayed properly in 3D images.
21
Hold
Freeze / unfreeze picture
Display the selectable settings for the current status
Confirm or change the current status instantly
● To change
select
select / change
access
store
Watching TV
[Multi Video] (DVB)
Selects from a group of multiple
videos (if available)
● This setting is not memorised
and it will return to the default
setting once you exit the current
programme.
[Dual Audio] (DVB)
Selects stereo / monaural (if
available)
[Teletext Language] (DVB)
Selects between alternative language
for teletext (if available)
[Sub Channel] (DVB)
Selects the multifeed programme sub channel (if available)
[MPX] (Analogue)
Selects multiplex sound mode (if
available)
(p. 40)
[Multi Audio] (DVB)
Selects between alternative
language for sound tracks (if
available)
● This setting is not memorised
and it will return to the default
setting once you exit the current
programme.
[Subtitle Language] (DVB)
Selects the language in which
subtitles should appear (if available)
[Volume Correction]
Adjusts volume of individual channel or
input mode
[Teletext Character Set]
Sets the teletext language font
(p. 44)
Off Timer
Turn the TV to Standby mode automatically after a fixed period
1 Display the menu
2 Select [Timer]
select
Timer
access
3 Select [Off Timer] and set the time in 15-minute increments
Timer Programming
Off Timer
Auto Standby
22
Off
15 minutes
30 minutes
45 minutes
60 minutes
75 minutes
90 minutes
select [Off Timer]
select the time
access
store
● To cancel, set to [Off] or turn the TV off.
● To confirm the remaining time
“Display Information banner” (p. 21)
● When the remaining time is within 3 minutes, the remaining time will flash on
the screen.
Aspect
Change the aspect ratio (image size)
Enjoy viewing the image at its optimum size and aspect.
Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TV will choose the
aspect ratio automatically according to the “Aspect Control Signal” (p. 90).
■ To change the aspect ratio manually
1 Display Aspect Selection list
2 While the list is displayed,
select the mode
Aspect Selection
Auto
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Select
EXIT
Change
● You can also change the mode only
using the ASPECT button.
select
store
(Press repeatedly until you
reach the desired mode.)
RETURN
Aspect Selection list
[Auto]
The best ratio is chosen and the image expanded to fill the screen.
For details (p. 90)
[4:3 Full]
Directly displays the image at 16:9
without distortion (anamorphic).
[14:9]
Displays a 4:3 image enlarged
horizontally to fit the screen.
Watching TV
[16:9]
[Zoom1]
Displays the image at the standard
14:9 without distortion.
[Just]
Displays a 16:9 letterbox or 4:3 image
without distortion.
[Zoom2]
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
[4:3]
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
[Zoom3]
Displays the image at the standard 4:3
without distortion.
Displays a 2.35:1 letterbox (anamorphic)
image full-screen without distortion.
At 16:9, displays the image at its
maximum (with slight enlargement).
Note
● Aspect cannot be changed in teletext service and 3D mode.
● Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals.
Last view
Switch to previously viewed channel or input mode easily
● Press again to return to the current view.
Note
● Switching channel is not available while the recording of Timer Programming or Direct TV Recording is in progress.
● Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.
23
Using TV Guide
TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast
and the forthcoming broadcasts over the next seven days (depending on the broadcasters).
● This function varies depending on the country you select (p. 15).
● The postcode entry or update may be required to use the GUIDE Plus+ system depending on the country you select.
“View advertisement” (p. 25)
● DVB-T and Analogue channels are displayed on the same TV Guide screen. [D] and [A] may be displayed to
distinguish DVB-T and Analogue channels. There will be no programme listings for Analogue channels.
● When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before TV Guide is completely shown.
1
Select the mode
2
View TV Guide
(p. 20)
Using TV Guide
● Press again to change the layout ([Landscape] / [Portrait]).
View [Landscape] to see several channels.
View [Portrait] to see one channel by time.
Example: [Landscape]
1
TV Guide: Landscape
Wed 26.10.2011
10:46
3
5
7
Wed 26.10.2011
All Types
All Channels
1 BBC ONE
20:00 - 20:30 DIY SOS : We open in the Battersbys
D
Time:
1 BBC ONE
19:30
Das Erste
D
7 BBC THREE
Hot Wars
20:00
DIY SOS
20:30
The Bill
21:00
Red Cap
Holiday Program
D 14 E4
Emmerdal.
D 70 BBC FOUR
10 O’ clock News BBC
Coronation Street
D 72 BBC 2W
Panorama
Good bye
Coast
Example: [Portrait]
TV Guide: Portrait
Wed 26.10.2011
10:46
■ To return to TV
Wed 26.10.2011
All Types
D 1 BBC ONE D 7 BBC THREED 14 E4
19:30-20:00 Das Erste
20:00-20:30
DIY SOS
20:30-21:00
The Bill
21:00-22:00
Red Cap
22:00-23:00
Live junction
23:00-23:30
POP 100
4
The Bill
Pepsi Char.
Spring watch
2
All Channels
D 70 BBC FOUR
6
1
2
3
4
5
6
Current date and time
TV Guide date
TV Guide time
Programme
Advertisement
Channel position and
name
7 [D]: DVB-T
[A]: Analogue
Depending on the country
you select, you can select
the TV Guide type
[Default Guide] (p. 44)
If you select [Channel List],
the channel list will appear
when the GUIDE button is
pressed.
■ To watch the programme
1 Select the current programme
or channel
select
access
24
2 Select [View] (DVB)
Das Erste
19:30- 20:00
View
Timer Programming
select
watch
● To use Timer Programming
(p. 26)
■ To the previous day (DVB)
■ To the next day (DVB)
(red)
(green)
■ To view a channel list of the selected type
■ To view a channel list of the selected category
(DVB)
(blue)
(yellow)
(Type list)
Prog.Type
All Types
(Category list)
select type
select category
Category
All Channels
view
All Channels
All DVB-T Channels
All Analogue Channels
Free TV
Pay TV
HDTV
Free Radio
Pay Radio
Favourites1
Favourites2
Favourites3
Favourites4
All Types
Movie
News
view
Only Analogue channels are listed
● To list favourite channels
(p. 48)
1 Select the programme
2 View details
● Press again to return to TV Guide.
Using TV Guide
Other useful functions
View details of the programme (DVB)
View advertisement
Depending on the country you select, this TV supports the GUIDE Plus+ system in DVB-T or Analogue mode
The postcode entry or update is required. Follow the on-screen instructions.
● You can also setup manually from the Setup Menu.
[Update] / [Postcode] in [GUIDE Plus+ Settings] (p. 45)
● Enter your postcode when using this function for the first time. If you enter an incorrect postcode for your area, or no
postcode is entered, advertisements may not be displayed correctly.
Display advertisement information
● To display the latest advertisement
[Update] in [GUIDE Plus+ Settings] (p. 45)
■ To change advertisements
■ To return to TV Guide
or
Note
● To update the information continuously, the TV must be left in Standby mode.
25
Timer Programming (DVB)
The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the
external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode.
1 Select the forthcoming programme
2 Select the function ([Ext Rec.] or [Reminder])
select
(Timer Programming screen)
Timer Programming
set
Function
Ext Rec.
● LED will turn to orange if
Timer Programming is set.
(Orange LED will flash if the recording
of Timer Programming is in progress.)
“Indicator / Control panel” (p. 11)
---
No.
D
12
Channel Name
BBC ONE
<TIMER>
---
Wed 26.10.2011 10:46
Date
Start
End
Wed 26.10.2011
20:00 20:30
(30 min.)
--/--
--:---:-(--- min.)
---
---
--/--
--:---:-(--- min.)
---
---
--/--
--:---:-(--- min.)
---
---
--/--
--:---:-(--- min.)
select
store
[Ext Rec.] / [Reminder]
“Set timer programming event details” (p. 53)
■ To check / change / cancel a timer
programming event
■ To return to TV Guide
“Timer Programming” (p. 52 - 54)
Using TV Guide
■ If you select the current programme
A confirmation screen asking whether you want to watch or record the programme appears.
Select [Timer Programming] and set [Ext Rec.] to record from the time you finish the timer programming event setting.
Das Erste
19:30- 20:00
View
Timer Programming
select
access
Note
● This function is not available in Analogue mode.
● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or
service provider.
● No other channel can be selected while the recording of Timer Programming is in progress.
● When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected
to the TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 81, 82) and [Link
Settings] (p. 42) are completed, no setting of the recorder is required. Also read the manual of the recorder.
26
Viewing Teletext
Teletext services are the text information provided by the broadcasters.
The features may vary depending on the broadcasters.
What is FLOF (FASTEXT) mode?
In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more information
about one of these subjects, press the appropriate coloured button. This facility enables fast access to information on
the subjects shown.
What is TOP mode? (in case of TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in an easier search and effective guide.
● Fast overview of the teletext information available
● Easy to use step-by-step selection of the topical subject
● Page status information at the bottom of the screen
● Available page up / down
● To select among subject blocks
● To select next subject within the subject
block
(red)
(green)
(blue)
(After the last subject, it moves to the
next subject block.)
1
Switch to Teletext
● Displays the index page (content varies
depending on the broadcasters).
Sub page number
<< 01 02 03 04 05 06 07
Viewing Teletext
(yellow)
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers
can be altered and stored in the TV’s memory. “Store frequently viewed pages” (p. 28)
■ To change mode [Teletext] (p. 44)
>>
17:51 28 Feb
Time / date
TELETEXT
INFORMATION
Colour bar
Current page number
2
Select the page
or
■ To return to TV
up
down
■ To adjust contrast
or
Coloured button
(Corresponds to the colour bar)
As the blue bar is displayed
(Press three times)
Reveal hidden data
Reveal hidden words e.g. quiz page answers
● Press again to rehide.
(red)
HOLD
Stop automatic updating
(If you want to hold the current page without updating.)
● Press again to resume.
INDEX
Return to the main index page
Call up a favourite page
View a favourite page stored
Call up the page stored on the blue button (List mode).
● Factory setting is “P103”.
27
FULL / TOP / BOTTOM
(green)
(TOP)
(BOTTOM)
Normal (FULL)
(Expand the TOP half)
(Expand the BOTTOM half)
View in multi window
Watch TV and Teletext in two windows at once
Select [Picture and text] On or Off
(Press twice)
● Operations can be made only in teletext screen.
Viewing Teletext
Store frequently viewed pages
Store frequently viewed pages in the colour bar (List mode only)
As page is displayed
press and hold
(Corresponding
coloured button)
The number changes
to white.
■ To change stored pages
Enter new page number
press and hold
Coloured button
you want to change
View sub page
View sub page (Only when Teletext is more than one page)
Appears at top of the
screen
● The number of sub pages varies depending on the
broadcasters (up to 79 pages).
● It may take some time for searching, during which
time you can watch TV.
■ To view specific sub page
Enter the 4-digit number
Example: P6
(blue)
Watch TV while waiting for update
View the TV picture while searching for a teletext page
Teletext automatically updates itself when new information becomes available.
Changes to TV screen temporarily
(yellow)
Appears when
P108
updating is completed
(You cannot change the channel.)
● The news page provides a function that indicates arrival of the latest news (“News Flash”).
28
View the updated
page
(yellow)
Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.
● To connect the equipment
(p. 12 - 14, 87 - 89)
The remote control is capable of operating the contents or external equipment. (p. 30)
1
Turn the TV on
When connecting with SCART (p. 13)
Receives input signals automatically when playback starts
● Input signals are automatically identified by the SCART (pin 8) terminal.
● This function is also available for HDMI connections (p. 87).
If input mode is not switched automatically
Perform
and
● Check the setup of the equipment.
Display the input selection menu
3
Select the input mode connected to the equipment
Input Selection
AV1
AV2
HDMI1
HDMI2
TV
SD Card/USB
select
watch
● You can also select the input using the AV button on the remote control or the TV
(except [SD Card/USB]).
Press the button repeatedly until the desired input is selected.
● To switch between [COMPONENT] and [VIDEO] in [AV2], move the indicator by
pressing left and right cursor button.
● [SD Card/USB]: Switches to Media Player.
“Using Media Player” (p. 60)
● You can label or skip each input mode (except [SD Card/USB]).
“Input Labels”
(p. 44)
Skipped inputs will not be displayed when the AV button is pressed.
■ To return to TV
4
Watching External Inputs
2
View
AV1
Displays the selected mode
Note
● If the external equipment has an aspect adjustment function, set it to “16:9”.
● For details, read the manual of the equipment or ask your local dealer.
29
Operating the contents or equipment with the TV remote control
You can operate the contents in Media Player / media servers, recording functions or the connected equipment with
the below buttons of this TV remote control.
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD / video content
Stop
Stop the operations
Rewind / Skip / Search
VCR:
Rewind, view the picture rapidly in reverse
DVD / video content:
Skip to the previous track, title or chapter
Press and hold to search backward
Watching External Inputs
Fast-forward / Skip / Search
VCR:
Fast-forward, view the picture rapidly forward
DVD / video content:
Skip to the next track, title or chapter
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
Channel Up / Down
Select channel
[Direct TV Rec]
(p. 81, 83)
How to change the code
Each type of the Panasonic equipment has its own remote control code.
To use in some features of this TV, you have to select the code “73”.
Change to the appropriate code according to the equipment or features below.
during the following operations
Press and hold
Enter the appropriate code,
Press
see table below
Type of the equipment, features
Code
DVD Recorder, DVD Player, Blu-ray Disc Player
70 (default)
Player theatre, Blu-ray Disc theatre
71
VCR
72
Using in Media Player (p. 61),
DLNA features (p. 75) or Direct TV Recording (p. 81, 83)
Equipment using in VIERA Link (p. 84)
73
Note
● Confirm if the remote control works correctly after changing the code.
● The codes may be reset to default values if batteries are replaced.
● Some operations may not be possible on some equipment models.
30
Viewing 3D images
You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D
Eyewear.
“Optional accessories” (p. 7)
This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats.
∗1: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately
played back.
∗2, ∗3: Other available 3D formats
● How to view the 3D images (p. 33)
Caution
To use 3D Eyewear safely and comfortably, please read these instructions fully.
Viewing 3D images
Viewing 3D Content
● Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing
medical conditions.
● Please stop using the 3D Eyewear immediately, if you feel tired, are not feeling well or experience any other
uncomfortable sensation. When you set the effect by using [3D Adjustment], take into account that the vision of 3D
images varies among different individuals.
● Take an appropriate break after viewing a 3D movie.
● Take a break of between 30 - 60 minutes after viewing 3D content on interactive devices such as 3D games or
computers.
● Be careful not to strike the TV screen or other people unintentionally. When using the 3D Eyewear the distance
between the user and screen can be misjudged.
● The 3D Eyewear must only be worn when viewing 3D content.
● Use the 3D Eyewear where there is no interference from other devices with Bluetooth signal.
● If you suffer from any eyesight problems (short / far-sighted, astigmatism, eyesight differences in left and right),
please ensure to correct your vision before using the 3D Eyewear.
● Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content.
● Do not use the 3D Eyewear at a distance less than the recommended distance.
The recommended viewing distance is at least 3 times of the image height.
TX-P42XT50E: 1.6 m or more
TX-P50XT50E: 1.9 m or more
When the top and bottom area of the screen is blackened, such as movies, view the screen at a distance at least 3
times of the height of the actual image. (That makes the distance closer than above recommended figure.)
3D Eyewear Use
● Pay special attention when children are using the 3D Eyewear.
3D Eyewear should not be used by children younger than about 5 - 6 years old, as a guideline. All children must be
fully supervised by parents or guardians who must ensure their safety and health throughout the using 3D Eyewear.
● Before using the 3D Eyewear, ensure no breakable objects surrounding the user to avoid any accidental damage or
injury.
● Remove the 3D Eyewear before moving around to avoid falling or accidental injury.
● Use the 3D Eyewear only for the intended purpose and nothing else.
● Do not use 3D Eyewear in the condition of high temperature.
● Do not use if the 3D Eyewear is physically damaged.
● Do not use devices (such as mobile phones or personal transceivers) that emit strong electromagnetic waves near
the 3D Eyewear as this may cause the 3D Eyewear to malfunction.
● Stop using the 3D Eyewear immediately if a malfunction or fault occurs.
● Stop using the 3D Eyewear immediately if you experience any redness, pain, or skin irritation around the nose or
temples.
● In rare cases, the materials used in the 3D Eyewear may cause an allergic reaction.
31
3D Eyewear (optional)
● Use the Panasonic 3D Eyewear that has this logo and supports
Bluetooth® wireless technology.
“Full HD 3D Glasses™” logo indicates products that are compatible with the active shutter 3D
glasses technology standards licensed by the Full HD 3D Glasses Initiative. The RF mark on
the logo means the wireless system (Bluetooth® wireless technology), and you can use the 3D
Eyewear and the TV that have the same mark together.
Note
● Use the 3D Eyewear within approximately 3.2 m from the TV. You cannot view the 3D images with the 3D Eyewear
too far from the TV, because of the difficulty of receiving radio waves from the TV.
● The range may be shortened depending on the obstacles between the TV and the 3D Eyewear, or the surrounding
environment.
● There are differences in the viewing range of the 3D Eyewear among individuals.
● The 3D Eyewear may not operate correctly at the outside of the viewing range.
Viewing 3D images
32
To view the 3D images
You can enjoy the 3D images in a variety of ways.
(Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.)
■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format)
● Connect the 3D-compatible player via a fully wired HDMI compliant cable.
● If input mode is not switched automatically, select the input mode connected to the player. (p. 29)
● If you use the non 3D-compatible player, the images will be displayed on 2D mode.
■ 3D-supported broadcast
● Please consult the suppliers of contents or programmes for availability of this service.
■ 3D photos and 3D videos taken by 3D-compatible Panasonic products
● Available in Media Player (p. 62 - 64, 66) and Network services (p. 76)
■ 2D images converted to 3D
● Set to [2D
3D] mode in [3D Mode Selection]. (p. 34)
Preparations
Perform the First Registration when the 3D Eyewear is used for the first time. For details, read the manual of the 3D
Eyewear.
Turn the 3D Eyewear on and put it on
2
View the 3D images
● Connection status and battery status are displayed on the bottom right of the screen.
● Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view
3D images.
If you select [Yes], this message will be displayed again in the same condition after Mains power On / Off
switch is next turned on. Select [No] if you do not want to display this message again.
● Turn off the 3D Eyewear after using it.
Viewing 3D images
1
Note
● 3D Eyewear is not included. Please purchase as necessary. (p. 7)
● For more detail about using and wearing the 3D Eyewear, read the manual of the 3D Eyewear.
● The 3D image or 3D effect may not be available in the following conditions:
• VIERA Connect home screen (p. 19) is displayed.
• [Ext Rec.] of Timer Programming (p. 52) is in progress.
• Direct TV Recording (p. 81, 83) is in progress.
As for the contents of the Frame Sequential format and Side by Side (Full), no images will be displayed in these
conditions.
● If light appears to flicker under fluorescents or dimmers when using the 3D Eyewear, change the setting of [3D
Refresh Rate]. (p. 39)
● 3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.
● Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as
computer screens, digital clocks or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.
● Do not use the 3D Eyewear as sunglasses.
● 3D effects may be perceived differently depending on the person.
Changing 2D - 3D mode
You can easily change the viewing mode between 2D and 3D using the 3D button.
Select the mode
● Items of [3D Mode Selection] vary
3D Mode Selection
select
depending on the condition.
2D 3D
3D
set
2D
[3D] / [2D] / [2D 3D]:
Displays the appropriate image that you desire without selecting 3D format.
● This mode may not work properly depending on the source image format. In this case, select the appropriate 3D
format manually.
33
■ To change 3D format manually
When the image is not changed properly using [3D], [2D] or [2D
During the above operation
(red)
3D] mode, use this manual setting.
Select the mode
select
3D Mode Selection (Manual)
Original
Frame Sequential - 3D
Frame Sequential - 2D
Side by Side - 3D
Side by Side - 2D
Top and Bottom - 3D
Top and Bottom - 2D
2D 3D
set
Viewing 3D images
[Original]:
Displays the source image as it is.
● Use to identify the format type of the source image.
“Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format”
(see below)
[Frame Sequential - 3D] / [Frame Sequential - 2D] / [Side by Side - 3D] / [Side by Side - 2D] /
[Top and Bottom - 3D] / [Top and Bottom - 2D]:
Displays the mode you select.
● Not valid on Analogue and AV mode
[2D 3D]:
Converts 2D images into 3D.
● Please note the 3D images appear slightly different from the originals.
● Using this function for profit-making purposes, or publically showing images converted from 2D to 3D in places
such as shops or hotels etc. may infringe on the rights of the copyright holder protected under copyright law.
Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format
If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.
[3D Mode Selection]
Source
image format
Frame Sequential
Side by Side (Full)
Side by Side
Top and Bottom
[Original]
[Frame
Sequential
- 3D]
[Side by Side
- 3D]
[Top and
Bottom - 3D]
[2D
3D]
Normal 3D∗1
Normal 3D∗1
Normal 3D∗1
Normal 3D∗1
Normal format (2D)
Normal 3D
∗1: When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images will be displayed
without 3D effect.
● Depending on the player or broadcasts, the image may be different from the above illustrations.
34
3D Settings
If the 3D images are not displayed correctly or seem unusual, adjust and setup the 3D settings.
1
Display the menu
2
Select [Picture]
select
Picture
3
Select [3D Settings]
2/2
P-NR
3D Settings
Screen Display
Advanced Settings
Reset to Defaults
■ To return to TV
Item
2D
3D Depth
Off
Access
On
select
access
Select one of the following functions and set
3D Settings
2D 3D Depth
3D Adjustment
Picture Sequence
Edge Smoother
3D Detection
3D Signal Message
Safety Precautions
Mid
Access
Normal
Off
On
On
Access
select
adjust
access / store
Viewing 3D images
4
access
Adjustments / Configurations (alternatives)
Selects a level of 3D-image depth for viewing converted 2D images [Min] / [Mid] / [Max]
3D Adjustment
Adjustment of the 3D effect (except in [2D 3D] mode) [Off] / [On]
● Set to [On] to enable [Effect] setting.
● When setting to [On], a safety precaution message will appear. Read it carefully and press the
BACK/RETURN button to go to [Effect] setting.
[Effect]: Adjusts the 3D depth according to the contents or to your preference.
Picture
Sequence
Select [Reverse] if you feel that the sense of depth is unusual (except in [2D
[Normal] / [Reverse]
Edge Smoother
Set to [On] if you feel the contoured parts of an image are not smooth enough (except in [2D
3D] mode) [Off] / [On]
3D Detection
Automatically detects the 3D format signals [Off] / [On] / [On (Advance)]
[On (Advance)]: Detects all the 3D format signals and displays the 3D image automatically.
[On]: Detects the particular 3D format signals (Frame Sequential, etc.) and displays the 3D
image automatically.
● To view 3D images without any notifications and operations, set to [On (Advance)].
3D Signal
Message
Selects whether to give a notification message when a signal of 3D format is found [Off] / [On]
● For DVB, Component and HDMI input
● This function is not available when [3D Detection] is set to [On (Advance)].
Safety
Precautions
Displays the precautions for viewing 3D images
3D] mode)
Note
● [3D Adjustment] and [Picture Sequence] will not be memorised when changing the input mode or channel.
35
How to Use VIERA TOOLS
You can access some special features easily by using the VIERA TOOLS function.
1
Display icons of the feature
2
Select a feature
select
access
VIERA Link
■ To return to TV
or
How to Use VIERA TOOLS
■ Follow the operations of each feature
[VIERA Link]
(p. 83 - 86)
[Music]∗
(p. 68)
[Photo]∗
(p. 62)
[VIERA Connect]
(p. 19, 78)
[Video]∗
(p. 66)
[Media Server]∗
(p. 75)
∗When two or more available devices are connected, a selection screen will be displayed.
Please select the correct description and access.
Note
● If the selected feature is not available, the demonstration to explain how to use it can be displayed. Press the OK
button to view the demonstration after selecting the unavailable feature.
36
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
1
Display the menu
2
Select the menu
● Displays the functions that can be set (varies according to the input signal).
select
Main Menu
access
Picture
Sound
Network
Timer
How to Use Menu Functions
Setup
Select the item
3
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Vivid Colour
Eco Mode
■ To return to TV at
any time
■ To return to the
previous screen
1/2
select
60
0
30
5
0
access
Dynamic
Warm
Off
Off
■ Choose from among alternatives
Colour Balance
■ To change menu
select
Cool
Normal
Warm
store
■ Adjust using the slide bar
pages
5
Sharpness
up
change
store
Moved
down
■ Go to the next screen
Child Lock
Access
Displays the next screen
access
■ Enter characters by free input menu
You can enter names or numbers freely for some items.
Set characters one by one
User input
Name
A B C D E F G H
U V W X Y Z
0
I
J
K
L M N O P Q R S T
1
2
3
4
5
6
7
8
9
!
:
#
a
b
c
d
e
f
g
h
i
j
k
l
m n
o
p
q
r
s
t
u
v
w
x
y
z
(
)
+
-
.
*
_
● You can set characters by using numeric buttons.
Store
select
set
“Characters table for numeric buttons” (p. 96)
■ To reset the settings
● Picture or sound settings only
[Reset to Defaults] in the Picture Menu (p. 39) or
Sound Menu (p. 41)
● To initialise all settings
[Shipping Condition] (p. 45)
● Picture and sound settings together
(Also volume level and aspect mode are reset)
37
Menu list
Menu
Item
Viewing Mode
Selects your favourite picture mode for each input
[Dynamic] / [Normal] / [Cinema] / [True Cinema] / [Game]
[Dynamic]:
Improves contrast and sharpness for viewing in a bright room.
[Normal]:
Normal use for viewing in a normal lighting condition.
[Cinema]:
Improves the performance of contrast, black and colour reproduction for
watching movies in a darkened room.
[True Cinema]:
Reproduces the original image quality precisely without any revision.
[Game]:
Provides suitable images for fast response signal when playing games.
● Not valid on TV mode
● To display a continuous record of time spent using Game mode
[Playing Time Display] (p. 44)
In each Viewing Mode, [Contrast], [Brightness], [Colour], [Sharpness], [Tint],
[Colour Balance], [Vivid Colour], [Eco Mode], [P-NR] and [3D-COMB] can be
adjusted and stored for each input.
● You can set [Viewing Mode] in 2D and 3D mode for each.
Picture
How to Use Menu Functions
38
Adjustments / Configurations (alternatives)
Contrast, Brightness,
Colour, Sharpness
Adjusts the levels of these options according to your personal preference
Tint
Adjusts the picture hue to suit your taste
● For NTSC signal reception
Colour Balance
Sets the overall colour tone of the picture [Cool] / [Normal] / [Warm]
● Not valid when [Viewing Mode] is set to [True Cinema]
Vivid Colour
Automatically adjusts colours to vivid ones [Off] / [On]
Eco Mode
Automatic Brightness Control function
Adjusts picture settings automatically depending on ambient lighting conditions
[Off] / [On]
P-NR
Picture Noise Reduction
Reduces unwanted picture noise and flicker noise in the contoured parts of a
picture [Off] / [Min] / [Mid] / [Max] / [Auto]
● Not valid when [Viewing Mode] is set to [Game]
3D-COMB
Makes still or slow moving pictures more vivid [Off] / [On]
● Occasionally, while viewing still or slow moving pictures, colour patterning may
be seen. Set to [On] to display sharper and more accurate colours.
● For PAL / NTSC signal reception in TV mode or from composite (except 3D
mode)
3D Settings
Adjusts and sets to view 3D images (p. 35)
Screen Display
Turns the screen off when you select [Off]
[Off] / [On]
● The sound is active even if the screen turns off.
● Press any buttons (except Standby) to turn the screen on.
● This function is effective in reducing power consumption when listening to the
sound without watching the TV screen.
Menu
Adjustments / Configurations (alternatives)
Intelligent Frame
Creation
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth [Off] / [Mid] / [Max]
● Depending on the contents, images may be noisy. To prevent the noise, change
the setting.
● Not valid when [Viewing Mode] is set to [Game]
24p Smooth Film
Automatically compensates the picture frame rate to make the 24p source movie
images smooth [Off] / [Mid] / [Max]
● This is available only for 24p signal input and displayed instead of [Intelligent
Frame Creation].
● Not valid when [Viewing Mode] is set to [Game]
3D Refresh Rate
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear [Auto] / [100Hz] / [120Hz]
[100Hz]:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
[120Hz]:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
Side Panel
Adjusts the brightness of the side panel [Off] / [Low] / [Mid] / [High]
● The recommended setting is [High] to prevent panel “image retention”.
16:9 Overscan
Selects the screen area displaying the image [Off] / [On]
[On]:
Enlarges the image to hide the edge of the image.
[Off]:
Displays the image in the original size.
● Set to [On] if noise is generated on the edge of the screen.
● This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].
● This function can be memorised separately for SD (Standard definition) and HD
(High definition) signals.
● Not valid on VIERA Connect
AV Colour System
Selects optional colour system based on video signals in AV mode
[Auto] / [PAL] / [SECAM] / [M.NTSC] / [NTSC]
DVI Input Setting
Changes the black level of the image for HDMI input mode with DVI input signal
manually [Normal] / [Full]
● When the DVI input signal from the external equipment (especially from PC) is
displayed, the black level may not be suitable. In this case, select [Full].
● The black level for HDMI input signal will be adjusted automatically.
● For HDMI input mode with DVI input signal
Pixel Orbiter
Selects the mode for wobbling of the image to prevent panel “image retention”
[Auto] / [On]
[Auto]:
Automatically works only for the appropriate images and you rarely recognise
the wobbling.
Scrolling Bar
Displays scrolling bar pattern to assist elimination of panel “image retention”
● Press the OK button to start scrolling and press any buttons (except Standby) to
exit this mode.
● For positive effect to eliminate “image retention”, it may be necessary to display
for a long time.
Reset to Defaults
How to Use Menu Functions
Advanced Settings
Picture
Item
Press the OK button to reset the current Picture Viewing Mode of the selected
input to the default settings
39
Menu
Sound
How to Use Menu Functions
40
Item
Adjustments / Configurations (alternatives)
Mode
Selects your favourite sound mode [Music] / [Speech] / [User]
● The selected mode affects all input signals.
[Music]:
Improves sound quality for watching music videos, etc.
[Speech]:
Improves sound quality for watching news, drama, etc.
● In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and
those settings will be stored for each mode.
[User]:
Adjusts the sounds manually by using the equaliser to suit your favourite sound
quality.
● For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass]
and [Treble]. Select [Equaliser] and adjust the frequency.
[Equaliser] (see below)
Bass
Adjusts level to enhance or minimise lower, deeper sound output
Treble
Adjusts level to enhance or minimise sharper, higher sound output
Equaliser
Adjusts the frequency level to suit your favourite sound quality
● This function is available when [Mode] is set to [User].
● Select the frequency and change the frequency level by using the cursor button.
● To enhance the bass sound, raise the level of the lower frequency. To enhance
the treble sound, raise the level of the higher frequency.
● To reset the levels of each frequency to the default settings, select [Reset to
Defaults] by using the cursor button, and then press the OK button.
Balance
Adjusts volume level of right and left speakers
Headphone Volume
Adjusts the volume of the headphones
Surround
Surround sound settings [Off] / [V-Audio] / [V-Audio Surround]
[V-Audio]:
Provides a dynamic enhancer of width to simulate improved spatial effects.
[V-Audio Surround]:
Provides a dynamic enhancer of width and depth to simulate improved spatial
effects.
● Switching is also possible by the SURROUND button on the remote control
(p. 10).
Auto Gain Control
Automatically regulates large sound level differences between channels and
inputs [Off] / [On]
Volume Correction
Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
Compensates for the low frequency sound due to the distance between the
speakers and the wall [Over 30cm] / [Up to 30cm]
● If the back space between the TV and wall is over 30 cm, [Over 30cm] is
recommended.
● If the back space between the TV and wall is within 30 cm, [Up to 30cm] is
recommended.
MPX
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
● For Analogue mode
Menu
Item
Adjustments / Configurations (alternatives)
SPDIF Selection
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
● For DVB mode or video contents of Media Player / Network services (p. 67, 78)
● ARC (Audio Return Channel): A function of digital audio output using HDMI
cable
HDMI1 / 2 Input
Selects to fit the input signal [Digital] / [Analogue] (p. 94)
[Digital]: When sound is carried via the HDMI cable connection
[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable
connection
● For HDMI input
SPDIF Delay
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2
(ARC function) terminals if the sound does not synchronise the image
● For DVB mode
Reset to Defaults
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Connection Test,
Network Connection,
Wireless Network
Settings, IP/DNS
Settings
Sets the network setting to use in your network environment (p. 72, 73)
Network Link Settings
Sets to control the TV with the devices connected to the network (p. 71)
How to Use Menu Functions
Audio Type
Narration settings for visually impaired users (only available in some countries)
[Standard] / [Visual Impaired]
● Set to [Visual Impaired] to activate the narration sound track when available on
the broadcast.
● For DVB mode
Sound
Audio Preference
Selects the initial setting for audio tracks
[Auto] / [Multichannel] / [Stereo] / [MPEG]
● Selectable options vary depending on the country you select.
[Auto]: Automatically selects the audio tracks if programme has more than two
tracks. The priority is given in the following order - Dolby Digital Plus, HEAAC, Dolby Digital, MPEG.
[Multichannel]: The priority is given to multi-channel audio track.
[Stereo]: The priority is given to stereo (2ch) audio track.
[MPEG]: The priority is given to MPEG.
● Dolby Digital Plus and Dolby Digital are the methods of coding digital signals
developed by Dolby Laboratories. Apart from stereo (2ch) audio, these signals
can be multi-channel audio.
● HE-AAC is a perceptual coding method used to compress digital audio for
efficient storage and transmission.
● MPEG is an audio compression method that compresses audio to the smaller
size without any considerable loss of audio quality.
● Dolby Digital Plus and HE-AAC are the technologies for HD (High definition)
programmes.
● For DVB mode
Network
41
Menu
Network
Timer
How to Use Menu Functions
Adjustments / Configurations (alternatives)
Software Update
Checks for available software updates from the Panasonic website
New Software Message
Selects whether to give a notification message when new software is found via
network [Off] / [On]
Network Status
Displays the network status (MAC Address, current network settings, etc.)
Timer Programming
Sets a timer to record or remind forthcoming programmes (p. 52)
● For DVB mode
Off Timer
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 22)
Auto Standby
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
● Starting Timer Programming automatically does not affect this function.
● Automatic input switching with the connected equipment affects this function
and time-count will be reset.
● The notification message will appear 3 minutes before going into Standby mode.
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
● If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby]
[On (No reminder)]
[Auto Standby]
[2 hours]
Link Settings
Setup
42
Item
VIERA Link
Sets to use VIERA Link functions [Off] / [On] (p. 82)
HDMI Content Type
Automatically adjusts the picture settings according to the received HDMI content
via HDMI cable [Off] / [Auto]
● This function is available if the connected equipment supports HDMI Content
Type.
● The content type information will be displayed for several seconds when this
function works.
AV1 out
Chooses the signal to be transmitted from the TV to Q-Link
[TV] / [AV2] / [Monitor]
[Monitor]: Image displayed on screen
● Component and HDMI signals cannot be output.
Power on Link
Sets to use Power on Link function [Off] / [On] (p. 81, 82)
Power off Link
Sets to use Power off Link function [Off] / [On] (p. 81, 82)
Standby Power
Save
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On] (p. 83)
● This function is available when [VIERA Link] is set to [On] and [Power off Link]
is set to [On].
Menu
Link Settings
Item
Adjustments / Configurations (alternatives)
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 83)
● This function is available when [VIERA Link] is set to [On].
Download
Downloads channel, language and country / region settings to Q-Link or
VIERA Link compatible equipment connected to the TV
● DVB-C channel setting cannot be downloaded.
Child Lock
Applies access control for channels or inputs to prevent unwanted access (p. 55)
Language
Creates a list of favourite channels (p. 48)
● Not valid on Analogue mode
Channel List
Skips the unwanted channels or edits channels (p. 49)
Auto Setup
Automatically searches for the receivable channels (p. 46, 47)
Manual Tuning
Searches for the channels manually (p. 50)
Update Channel
List
Updates the channel list while keeping your settings (p. 51)
● For DVB mode
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries)
● For DVB mode
New Channel
Message
Selects whether to give a notification message when a new channel is found
[Off] / [On] (p. 51)
● For DVB mode
Service
Replacement
Set to [On] to enable a message to switch to the available service (only available
in some countries) [Off] / [On]
● For DVB-C mode
Signal Condition
Checks the signal condition (p. 51)
● Not valid on Analogue mode
Attenuator
Automatically reduces the DVB-C signal to avoid the interference [Off] / [On]
● If the DVB-C signal is too strong, the interference may occur. In this case set to
[On] to reduce the signal automatically.
Add TV Signal
Adds the TV mode
● This function is available if you skip any modes to tune in [Auto Setup] for first
using the TV.
● To operate, refer to the “Auto Setup” operations for first using the TV (p. 15).
OSD Language
Changes language for on-screen displays
Preferred Audio
1/2
Selects the first and second preferred language for DVB multi audio (depending
on the broadcaster)
Preferred Subtitles
1/2
Selects the first and second preferred language for DVB subtitles (depending on
the broadcaster)
● To display subtitles (p. 21)
Preferred Teletext
Selects the preferred language for DVB teletext service (depending on the
broadcaster)
How to Use Menu Functions
Tuning Menu∗
Setup
Favourites Edit
43
Menu
Display Settings
Setup
How to Use Menu Functions
44
Item
Adjustments / Configurations (alternatives)
Preferred Subtitle
Type
Selects the preferred subtitle type [Standard] / [Hard of Hearing]
● [Hard of Hearing] provides aids in understanding and enjoyment with DVB
subtitles (depending on the broadcaster).
● [Preferred Subtitles 1 / 2] in [Language] are given priority.
Teletext
Teletext display mode [TOP (FLOF)] / [List] (p. 27)
Teletext Character
Set
Selects teletext language font [West] / [East1] / [East2]
[West]: English, French, German, Greek, Italian, Spanish, Swedish, Turkish, etc.
[East1]: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian, etc.
[East2]: Czech, Hungarian, Lettish, Polish, Rumanian, etc.
Default Guide
Selects the default TV Guide type when the GUIDE button is pressed (only
available in some countries) [Channel List] / [TV Guide]
[TV Guide]:
Electronic Programme Guide (EPG) is available.
● To use EPG
(p. 24)
[Channel List]:
The channel list will appear instead of EPG.
Input Labels
Accesses the input labels list to select the label of each input mode or set to skip
unconnected one for easier identification and selection in [TV Selection] (p. 20),
[Input Selection] (p. 29) or banner
● To name each input mode freely, select [User input] and set characters
(maximum 10 characters).
● To skip the input mode, select [Skip].
Banner Display
Timeout
Sets how long the Information banner stays on screen
[0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds)
VIERA Connect
Banner
Sets the VIERA Connect introduction banner display [Off] / [On] (p. 19, 20)
Playing Time
Display
Set to [On] to display a continuous record of time spent using Game mode in the
top right of the screen every 30 minutes [Off] / [On]
● This function is available when [Viewing Mode] is set to [Game]. (p. 38)
Data Service
Application
Sets to use Hybrid Broadcast Broadband TV application (depending on the
selected country and broadcaster) [Off] / [Auto Start Off] / [Auto Start On]
(p. 56)
● For DVB mode
Radio Mode
Sets the timer for turning off the screen automatically when a radio channel is
selected [Off] / [5] / [10] / [15] / [20] (seconds)
● The sound is active even if the screen turns off. This function is effective in
reducing power consumption when listening to a radio channel.
● Press any buttons except Standby, Volume Up / Down and MUTE buttons to
turn the screen on.
● Not valid on Analogue mode
Common Interface
Sets to watch encrypted channels, etc. (p. 57)
DivX® VOD
Displays DivX VOD registration code (p. 93)
Menu
Item
Adjustments / Configurations (alternatives)
Shipping Condition
Resets all settings to the original condition (p. 58)
System Update
Downloads new software to this TV (p. 59)
Software Licence
Displays the software licence information
System Information
Displays the system information of this TV
Device Information
Displays the device information of this TV
Update
Performs the update of the GUIDE Plus+ schedule and advertising information for
the GUIDE Plus+ system (only available in some countries) (p. 25)
Postcode
Sets your postcode to display advertisements in the GUIDE Plus+ system (only
available in some countries) (p. 25)
System
Information
Displays the system information of the GUIDE Plus+ system (only available in
some countries)
Other Settings
Power on
Preference
Automatically selects the input when the TV is turned on [TV] / [AV]
● Set to [TV] to view picture from TV tuner. Set to [AV] to view input from the
external equipment connected to the AV1 or HDMI1 terminal, e.g. set top box.
● The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
USB Charge in
Standby
Enables to supply the power from the USB port in Standby mode [Off] / [On]
● Available for charging the rechargeable 3D Eyewear (optional)
● This function is available when in Standby mode.
Power Save
Reduces brightness of the picture to economise on power consumption
[Off] / [On]
Time Zone
Adjusts the time data
● The time data will be corrected based on GMT.
How to Use Menu Functions
Selects the language that your USB Keyboard supports
● For the information of using USB Keyboard (p. 95)
GUIDE Plus+ Settings
System Menu
Setup
USB Keyboard
Layout
∗The settings in [Tuning Menu] are applicable only for the selected TV mode. The menu name varies depending on the
TV mode. ([DVB-C Tuning Menu] / [DVB-T Tuning Menu] / [Analogue Tuning Menu])
● A different menu will be displayed in the mode of Media Player / network service operations. (p. 61 - 68, 75 - 78)
● Only available items can be selected.
45
Retuning from Setup Menu
Automatically retune the channels received in the area.
● This function is available if channel tuning is already performed.
● Only the selected mode is retuned. All the previous tuning settings are erased.
● If Child Lock PIN number (p. 55) has been set, the PIN number is required.
● If tuning has not been done completely
[Manual Tuning] (p. 50)
DVB-C, DVB-T, Analogue channels
1
Select DVB-C, DVB-T or Analogue
2
Display the menu and select [Setup]
(p. 20)
select
Setup
3
access
Select [DVB-C Tuning Menu], [DVB-T Tuning Menu] or [Analogue
Tuning Menu]
select
DVB-C Tuning Menu
DVB-T Tuning Menu
Analogue Tuning Menu
4
access
Select [Auto Setup]
Retuning from Setup Menu
select
Auto Setup
5
Access
Access
Access
Access
access
Set the Auto Setup settings (DVB-C)
DVB-C Auto Setup Settings
Search Mode
Scan Mode
Frequency
Symbol Rate
Network ID
Free Channels
Quick
Auto
Auto
Auto
Start scan
select
access / store
● After settings, select [Start scan].
● [Scan Mode]
[Full]: Scans the whole frequency range.
[Quick]: Scans the suitable frequency in your country.
● Normally set [Frequency], [Symbol Rate] and [Network ID] to [Auto].
If [Auto] is not displayed or if necessary, enter the value specified by your cable provider with numeric buttons.
6
Start Auto Setup (Settings are made automatically)
DVB-C:
DVB-C Auto Setup
All DVB-C tuning data will be erased
DVB-C Auto Setup
Progress
Free TV: 3
46
0%
This will take about 3 minutes.
No.
Channel Name
CBBC Channel
1
BBC Radio Wales
2
E4
3
Pay TV: 0
Searching
100%
Type
Free TV
Free TV
Free TV
Radio: 0
Quality
100
100
100
6
DVB-T:
DVB-T Auto Setup
DVB-T Auto Setup
CH 5
Progress
All DVB-T tuning data will be erased
This will take about 3 minutes.
CH
Channel Name
CBBC Channel
62
BBC Radio Wales
62
E4
62
62
Cartoon Nwk
Free TV: 4
69
Type
Free TV
Free TV
Free TV
Free TV
Quality
100
100
100
100
Radio: 0
Pay TV: 0
Searching
Analogue:
Analogue Auto Setup
Analogue Auto Setup
Scan
This will take about 3 minutes.
CH
CH 29
CH 33 BBC1
All analogue tuning data will be erased
CH 2
78 CC 1
41
Channel Name
Analogue: 2
Searching
● The channel, language and country / region settings are downloaded to Q-Link or VIERA Link compatible
equipment connected to the TV.
When the operation is completed, the channel at the lowest position will be displayed.
Auto setup using the buttons on the TV
For Auto Setup, using the buttons on the TV (p. 11)
1 Press the F button repeatedly until [Auto
2 Access [Auto Setup]
3 Set the search mode and scan mode
4 Start [Auto Setup]
Setup] appears
(DVB-C)
(select the item)
(set)
(store)
● To return to TV
Retuning from Setup Menu
● Control panel OSD appears
when pressing the control
panel button.
47
Tuning and Editing Channels
You can retune channels or make your favourite channel lists, skip unwanted channels, etc.
1
Select the mode
2
Display the menu and select [Setup]
(p. 20)
select
Setup
3
access
Select [DVB-C Tuning Menu], [DVB-T Tuning Menu] or [Analogue
Tuning Menu]
select
DVB-C Tuning Menu
DVB-T Tuning Menu
Analogue Tuning Menu
4
Access
Access
Access
access
● The displayed item depends on the selected mode.
Select one of the following functions
select
DVB-C Tuning Menu
Tuning and Editing Channels
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel Message
Signal Condition
Attenuator
Access
Access
Access
Access
Access
On
Access
Off
access
● The function items vary depending on the country you select (p. 15).
● [Auto Setup] “Retuning from Setup Menu” (p. 46, 47)
List favourite DVB channels [Favourites Edit]
Create your favourite channel lists from various broadcasters (up to 4: [Favourites]1 to 4).
The DVB Favourites lists are available from “Category” in the Information banner (p. 21) and the TV Guide screen
(p. 24).
1 Select a channel to list (
: Encrypted channel)
Example: DVB-C
DVB-C Favourites Editor
1
7
14
70
72
105
719
720
All DVB-C Channels
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
Sorting 123...
● To sort channel names in alphabetical order
Favourites1
(red)
● To display other Favourites
(green)
● To change the category
(blue)
2 Add it to the Favourites list
Example: DVB-C
DVB-C Favourites Editor
1
7
14
70
72
105
719
720
48
All DVB-C Channels
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
● To add continuous block of channels to the list at once
make the block
(yellow)
Sorting 123...
Favourites1
1 BBC One Wales
Wale
es
add
● To add all channels to the list
(yellow)
(green)
■ To edit Favourites list
While the cursor is in the Favourites field to edit
● To move the channel
Select the new position
(green)
● To delete the channel
Store
(green)
or
● To delete all channels
(yellow)
● To name the Favourites
Set characters (maximum 10 characters)
Store
select
User input
(red)
Name
set
● To use numeric buttons
(p. 96)
3 Store
Skip unwanted channels, Edit Channels [Channel List]
You can hide (skip) unwanted channels.
The hidden channels cannot be displayed except in this function.
Select a channel and reveal / hide
Example: DVB-C
All DVB-C Channels
70
72
105
719
720
1
7
● To reveal all channels
select
Sorting 123...
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
(yellow)
[Reveal] / [Hide]
: [Reveal]
: [Hide] (skip)
● To change the category (DVB)
(red)
(blue)
■ To edit channels
● To swap / move the channel position (if available)
Select the new position
(green)
or
Store
(green)
Example: Analogue
1
ITV
23:35
All Analogue Channels
CH23 SC1
Channel name
Channel position
Tuning and Editing Channels
● To sort channel names in alphabetical order (DVB)
● To retune each channel ([Manual Tuning] (p. 50)) (Analogue)
(red)
● To rename the channel name (Analogue)
Set characters (maximum 5 characters)
(blue)
Edit channel name
Store
select
Name
● To use numeric buttons
(p. 96)
set
Note
● If a VCR is connected only with the RF cable in Analogue mode, edit [VCR].
49
Set DVB channel manually [Manual Tuning]
Normally use [Auto Setup] or [Update Channel List] to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
● All channels found will be added to the Channel List.
DVB-C:
1 Enter the frequency
2 Select [Start scan]
DVB-C Manual Tuning
Frequency
Symbol Rate
Service ID
Signal Quality
Signal Strength
No.
select
474,00 MHz
Auto
Auto
Start scan
Channel Name
access
100%
100%
New
Type
● Normally set [Symbol Rate] and [Service ID] to [Auto].
DVB-T:
1 Adjust frequency for each channel
DVB-T Manual Tuning
Frequency
Signal Quality
Signal Strength
No.
[CH21]
Channel Name
474,00 MHz
Type
100%
100%
New
2 Search
select channel
adjust frequency
● Set where the level of [Signal Quality] becomes the maximum.
Set Analogue channel manually [Manual Tuning]
[Fine Tuning]:
Use to make small adjustments to the tuning of an individual programme (affected by weather conditions, etc.).
[Manual Tuning]:
Set Analogue channel manually after Auto Setup.
● Set [Sound System] and [Colour System], and then perform this function. Normally set [Colour System] to [Auto].
● If a VCR is connected only with the RF cable, select channel position [0].
Analogue Manual Tuning
Tuning and Editing Channels
1 BBC1
Fine Tuning
Manual Tuning
Sound System
Colour System
CH33
2
78
1
SC1
Auto
Store
41
SC1: PAL B, G, H / SECAM B, G
SC2: PAL I
SC3: PAL D, K / SECAM D, K
F: SECAM L, L’
1 Select the channel position
2 Select the channel
3 Search
4 Select [Store]
select
store
50
Update DVB channel automatically [Update Channel List]
You can add new channels, delete removed channels, update channel name and position automatically to the channel
list.
● The channel list is updated while keeping your settings in [Favourites Edit],
DVB-T Update Channel List
Progress
CH 5
69
[Channel List], [Child Lock], etc.
This will take about 3 minutes.
● Depending on the signal condition, the update may not work properly.
Channel Name
Type
Quality
CH
Display a notification message [New Channel Message] (DVB)
Selects whether to give a notification message when a new DVB channel is found.
● Selecting OK will perform [Update Channel List].
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Check DVB signal [Signal Condition]
Selects a channel and checks the DVB signal condition.
A good Signal Strength is not an indication of suitable signal for DVB reception.
Use the Signal Quality indicator as follows.
● Green bar: Good
● Yellow bar: Poor
● Red bar: Bad (Check the Terrestrial aerial or cable)
● To change the channel
Example:
DVB-C Signal Condition
Channel Name
Signal Quality
Signal Strength
Bit Error Rate
Network Name
Parameter
70 CBBC Channel
90
9 %
80
8 %
0.00E+00
Wenvoe
802,00 MHz, 64 QAM, 6940 kS/s
These bars show the maximum signal value of the selected
channel.
Tuning and Editing Channels
51
Timer Programming
Timer Programming from Menu
The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the
external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode.
TV Guide may also be used to set timer programming event (p. 26).
● This function is not available in Analogue mode.
● Timer Programming can store up to 15 events.
● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or
service provider.
● For recording using Timer Programming, the TV must be either on or in Standby. For reminders to be displayed, the
TV must be on.
● No other channel can be selected while the recording of Timer Programming is in progress.
● Recording an encrypted (copy-protected) programme may not be possible.
● When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected
to the TV. If a recorder compatible with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 81, 82)
and [Link Settings] (p. 42) are completed, no setting of the recorder is required. Also read the manual of the recorder.
● If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the
recorder. For preparations of a recorder, read the manual of the recorder.
● Recording to the external equipment via SCART is always in standard definition (composite video), even if the
original programme is in high definition.
● 2 minutes before the starting time, a reminder message appears if you are watching TV.
• To remove the message and start the programming
• To cancel the programming
Timer Programming
52
1
Select DVB-C or DVB-T
2
Display the menu and select [Timer]
(p. 20)
select
Timer
3
access
Select [Timer Programming]
select
Timer Programming
Off Timer
Auto Standby
Access
Off
Off
access
Set timer programming event details
1 Start making the settings
2 Select the function ([Ext Rec.] or [Reminder])
[Ext Rec.]:
Records the programme to the external recorder.
When the start time comes, the channel will be switched automatically and the video and audio signals will be
output. 2 minutes before the starting time, a reminder message appears if you are watching TV.
[Reminder]:
Reminds you to watch the programme.
When you are watching TV, a reminder message appears 2 minutes before the start time.
Press the OK button to switch to the programmed channel.
3 Set the channel, date and time (repeat the operations as below)
Set items in the order of 1 to 4.
select the item
● 1, 3 and 4 can also be entered with numeric
buttons.
set
: Overlapped timer programming events
Timer Programming
Function
Wed 26.10.2011 10:46
No. Channel Name
Date
Start
End
Reminder
D
7 BBC7
<TIMER>
Wed 26.10.2011
17:00
18:30
(90 min.)
Ext Rec.
D
1 BBC1
<TIMER>
STTL Wed 26.10.2011
18:00
20:00
(120 min.)
Ext Rec.
C
3 ITV1
<TIMER>
Thu 27.10.2011
21:30
22:30
(60 min.)
---
--:--
--:--
1
2
3
(yellow)
(Press again to remove subtitles)
--:--
4
Duration (automatic display)
[C]: DVB-C
[D]: DVB-T
● You cannot change the mode within the menu.
1 Channel number
2 Date
3 Starting time
4 Ending time
Timer Programming
---
Records with subtitles (if available)
● To indicate this
one day ahead
daily or weekly (press repeatedly)
● [Daily Sun-Sat]: Sunday to Saturday
● [Daily Mon-Sat]: Monday to Saturday
● [Daily Mon-Fri]: Monday to Friday
● [Weekly Sat/Fri/Thu/Wed/Tue/Mon/Sun]: Same time on the same day every week
4 Store
53
■ To edit a timer programming event
Select the event
● To change a timer programming event
Correct as necessary (p. 53)
● To delete a timer programming event
● To record with subtitles (if available)
• Each time pressed:
(yellow)
auto
off
● To cancel a timer programming event temporarily
• Each time pressed:
(blue)
cancel
stop cancelling
(red)
■ To unlock the tuner and stop recording
Note
Timer Programming
54
● Check that the LED is orange. If not, timer programming events are not active or not stored.
● Timer Programming reminder messages will remain displayed until one of the following occurs:
• You press the OK button to view the programme or the EXIT button to cancel the reminder.
• The timer programming event that the reminder is set for ends.
● “!” identifies that two or more timer programming events are overlapped. [Ext Rec.] is given priority over [Reminder].
As for the overlapped recording events, the first event starts and finishes as programmed. The next event can then
start.
● The recording of Timer Programming will automatically change to the programmed channel a few seconds before the
start time.
● To stop recording the timer programming event, it may be necessary to stop the recorder manually.
● The recording of Timer Programming will be performed even if the TV is in [Pause Live TV] recording (p. 84). In this
case, [Pause Live TV] recording will be cancelled.
Child Lock
You can lock specific channels / AV input terminals and control who watches them.
When the locked channel / input is selected, a message appears. Enter the PIN number to watch.
1
Display the menu and select [Setup]
select
Setup
2
access
Select [Child Lock]
select
Child Lock
access
Access
Control channel audience [Child Lock]
1 Enter the PIN number (4 digits)
● Enter the PIN number twice at first setting.
● Make a note of the PIN number in case you forget it.
● “0000” may be stored as the default PIN number which depends on
the country you select (p. 15).
Child Lock-PIN Entry
Please enter new PIN
PIN
* * * *
2 Select [Child Lock List]
select
Child Lock
Change PIN
Child Lock List
Parental Rating
access
Access
No limit
3 Select the channel / input to be locked
101
7
14
VCR
1
2
Name
BBC 1 Wales
BBC THREE
E4C
BBC1
*****
AV1
Input
DVB-C
DVB-T
DVB-T
Analogue
Analogue
Analogue
External
Sorting 123...
Type
Free TV
Free TV
Free TV
Analogue
Analogue
Analogue
AV
Lock
● To cancel
Select the locked channel / input
select
lock
: Appears when the channel / input is locked
● To sort channel names in
alphabetical order
● To lock all
Child Lock
Child Lock List - TV and AV
(green)
(red)
● To jump to the top of the next input
● To cancel all locks
(blue)
(yellow)
■ To change the PIN number
1. Select [Change PIN]
Change PIN
2. Enter a new PIN number twice
select
Child Lock
Access
access
■ To set Parental Rating
To watch the DVB programme that has the rating information over the selected age, enter the PIN number to watch
(depending on the broadcaster).
Select [Parental Rating] and set an age for the restriction of programmes.
● The availability of this function depends
Child Lock
select
on the country you select (p. 15).
access / store
Parental Rating
No limit
Note
● Setting [Shipping Condition] (p. 58) erases the PIN number and all settings.
55
Using Data Service Application
You can enjoy Hybrid Broadcast Broadband TV application that is one of the interactive data services for digital
broadcasting.
● To use Hybrid Broadcast Broadband TV application fully, you need a broadband network environment.
Ensure the network connections and network settings are completed.
“Network connections” (p. 70), “Network Setup” (p. 71 - 74)
● Not all the data service are available depending on the country, area and broadcaster.
● Depending on the connection environment, the internet connection may be slow or may not be successful.
1
Select DVB-C or DVB-T
2
Display the menu and select [Setup]
(p. 20)
select
Setup
3
Select [Display Settings]
select
Display Settings
4
access
Access
Select [Data Service Application] and set to [Auto Start On]
select
Display Settings
Data Service Application
Auto Start On
access / set
Using Data Service Application
Notification message will appear when the application is available. Follow the onscreen instructions.
Note
● Operations may vary depending on the broadcaster. Follow the on-screen instructions.
● On-screen instructions may not correspond to the remote control buttons.
■ To check the availability of the application
1
BBC ONE WALES
Coronation Street
20:00 - 20:55
Now
Info
20:35
All DVB-T Channels
Change category
“D” is displayed if programme has Hybrid
Broadcast Broadband TV application
56
access
■ To stop the application
Using Common Interface
The Common Interface Module menu provides access to software contained on Common Interface (CI) Modules.
● This function may not be available in some countries or regions.
● Video and audio signals may not be output depending on broadcasts or services.
Although CI module may enable you to view some services, this TV does not guarantee all services (e.g. encrypted
pay-TV channels).
Please use only the approved CI module by the broadcaster.
Consult your local Panasonic dealer or broadcasters for more information and conditions of the services.
CI slot
Caution
● Turn off Mains power On / Off switch whenever inserting
or removing the CI module.
● If a view card and a card reader come as a set, first
insert the card reader, then insert the view card into the
card reader.
● Insert the module in the correct direction.
Insert or remove completely
CI module
Side of the TV
Insert the CI module (optional)
● The features that appear on screen are dependent on the contents of the selected CI module.
● Normally encrypted channels will appear. Follow the on-screen instructions.
If encrypted channel does not appear, perform below.
● For more details, read the manual of the CI module, or check with the broadcaster.
1
Select DVB-C or DVB-T
2
Display the menu and select [Setup]
(p. 20)
select
Setup
Select [Common Interface]
select
Common Interface
4
Access
access
Access Common Interface and follow the on-screen instructions
Common Interface
Slot 1:
Using Common Interface
3
access
Module inserted
● On-screen instructions may not correspond to the remote control buttons.
57
Shipping Condition
Resets the TV to its original condition, i.e. no channels tuned in.
All settings are reset (channels, picture, sound settings, etc.).
● To retune TV channels only, e.g. after moving house “Retuning from Setup Menu” (p. 46, 47)
1
Display the menu and select [Setup]
select
Setup
2
Select [System Menu]
select
System Menu
3
access
access
Access
Select [Shipping Condition]
select
System Menu
Shipping Condition
access
Access
Restore Settings [Shipping Condition]
2 Follow the on-screen instructions
1 Check the message and initialise
Shipping Condition
All tuning data will be erased
Shipping Condition
58
1
Are you sure ?
(Confirm)
Are you sure ?
2
(Confirm)
3
(Start [Shipping Condition])
Reset to Factory Shipping Condition
Completed.
TV will automatically restart.
Do not turn off
● [Auto Setup] will automatically start.
(p. 15)
Updating the TV Software
A new version of software may be released for download to enhance the performance or operations of the TV.
If there is an update available, a notification message is displayed when the channel has the update information.
● To download
(Press the EXIT button not to download)
You can update new software automatically or update manually.
1
Display the menu and select [Setup]
select
Setup
2
Select [System Menu]
select
System Menu
3
access
access
Access
Select [System Update]
select
System Menu
System Update
access
Access
Update TV’s software system [System Update]
Select [Auto Update Search in Standby]
System Update
select
Auto Update Search in Standby Off
System Update Search Now
access / store
If System Update is performed, the software will be
updated (it may change TV functions).
If you do not want to do so, set [Auto Update Search in
Standby] to [Off].
● Every time you set, the TV automatically
performs a search in Standby and downloads an
update, if any software updates are available.
● The automatic updating is performed under the
following conditions:
• Standby (TV turned off with the remote control)
• Recording of Timer Programming or Direct TV
Recording is not in progress.
Updating the TV Software
■ To update automatically
■ To update immediately
1 Select [System Update Search Now]
2 Searches for an update (for
System Update
select
Auto Update Search in Standby Off
Access
System Update Search Now
access
several minutes) and displays a
corresponding message if any
3 Download
Note
● Download may take for about 60 minutes.
● During software download and update, DO NOT switch off the TV.
● The notification message might be a reminder. In this case, the schedule information (the date that the new version
can be used) will appear. You can set the reservation for update. The update will not start when the TV is off.
59
Using Media Player
Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory.
VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV
screen by simply inserting into the SD Card slot.
Photo mode:
Still pictures recorded by digital cameras will be displayed.
Video mode:
Moving pictures recorded by digital video cameras will be played back.
Music mode:
Digital music data will be played back.
● During the operation, audio signal is output from AV1, DIGITAL AUDIO OUT and HDMI2 (ARC function) terminals.
But no video signals are output. AV1 can output audio signal if [AV1 out] is set to [Monitor] in the Setup Menu (p. 42).
To use HDMI2 with ARC function, connect an amplifier that has ARC function (p. 80) and set to use theatre speakers
(p. 86).
● [Date] shows the date on which the recording was made by the recording equipment. The file without record of the
date is shown “**/**/****”.
● The picture may not appear correctly on this TV depending on the recording equipment used.
● Display may take some time when there are many files and folders.
● Partly degraded files might be displayed at a reduced resolution.
● Picture setting may not work depending on the conditions.
● The folder and file names may be different depending on the digital camera or digital video camera used.
■ To insert or remove the SD Card / USB Flash Memory
USB Flash Memory
● Insert or remove straightly and completely.
● Connect the USB Flash Memory to the USB 1 or 2 port.
Using Media Player
SD Card
Gently insert the SD Card with
the label surface facing front.
Push until a click is heard.
To remove, push it again.
Cutout
● Check the type of terminals and cable plugs are correct when connecting.
● For the information of the devices “Devices for recording or playing back” (p. 94)
● For the supported file format “Supported file format in Media Player and media servers” (p. 91, 92)
60
Starting Media Player
1
Insert the SD Card or USB Flash Memory to the TV
2
Confirm the message and start Media Player
(p. 60)
● You can also start by pressing following button.
“Watching External Inputs” (p. 29)
3
Select the device to access
Drive Select
EXIT
Select
RETURN
Access
SD Card
USB Drive...
select
access
USB Flash...
SD Card
● If two or more devices are not connected, this step will be skipped.
Selected device name
4
Select the content
[Photo]
[Video]
[Music]
Contents Select
EXIT
Select
RETURN
Access
Photo
Video
select
access
Music
(p. 62)
(p. 66)
(p. 68)
SD Card
5
Enjoy Media Player
Example: Thumbnail - [All photos]
Media Player
Photo
All photos
● To display the information of the highlighted content
View
Select
Slideshow
Info
EXIT
Option Menu
RETURN
View Select
Drive Select
SD Card
File number / Total file number
Selected device name
Contents Select
Note
● You can also access each mode directly by using VIERA TOOLS.
(p. 36)
● Select the appropriate device and content for playing back each file.
● You can use the following buttons during playback. Set the code of the remote control to “73” (p. 30).
Using Media Player
1/48
File name
p1010001.JPG
Date
23/10/2011
Pixel
1600X1200
Change the device
You can change to the other device directly in the same mode if two or more devices are connected.
1 While the thumbnail is displayed,
display the device selection
(yellow)
2 Select the device to access
Drive Select
EXIT
Select
RETURN
Access
SD Card
USB Drive...
USB Flash...
select
access
SD Card
Selected device name
61
Change the contents
You can switch to the other mode of Media Player from the thumbnail view.
● The mode can be switched in the current device.
1 While the thumbnail is displayed,
display the contents selection
2 Select the contents
Contents Select
(blue)
EXIT
Select
RETURN
Access
Photo
Video
select
access
Music
SD Card
Photo mode
Photo mode will read all “.jpg” extension files and supports “.mpo” extension files in the SD Card or USB Flash
Memory.
The thumbnail of all the photos in the SD Card or USB Flash Memory will be displayed.
Example: Thumbnail - [All photos]
Media Player
Photo
All photos
● To change the size of photos on a thumbnail screen
select [Change Size]
change
: Error display
View
Select
Slideshow
Info
EXIT
Option Menu
RETURN
View Select
Drive Select
SD Card
Contents Select
[Single view] - Photos are displayed one at a time.
Select the file from the thumbnail of photos to be viewed
select
access
Using Media Player
Example:
Single view
● To display / hide the operation
guide
● To operate Single view
To the previous photo
Slideshow
Single view
Stop
To the next photo
● To return to thumbnail
Stop
(return to thumbnail)
EXIT
Select
RETURN
● To rotate 90°
Rotate
Operation guide
(blue)
[Slideshow] - Slideshow completes when all photos are viewed within the current thumbnail.
1 Select the file from the thumbnail of photos
2 Start Slideshow
for the first view
(red)
● To display / hide the operation guide
● To change the back ground music
62
● To pause (return to Single view)
“Photo Settings” (p. 64)
● To return to thumbnail
■ To sort by folder, recorded date or recorded month
1 Display the view selection in the thumbnail view
(green)
2 Select the sort type
[Folder view]:
Displays the thumbnail grouped by folder.
● The files which are not into a folder will be collected to the folder named “/”.
[Sort by Date] / [Sort by Month]:
Displays the thumbnail grouped by the same date or month.
● The group of the photos without a recorded date is shown as [Unknown].
select
access
● To return to the thumbnail of all photos
select [All photos]
(green)
access
Multi Shot 3D
This TV can create the 3D photo using a pair of photos in the SD Card and save it into the same SD Card.
● This TV can also create the 3D photo from photos in the USB Flash Memory, but cannot save it.
● This function is available with photos recorded by digital cameras.
● Depending on the photos you select, the created 3D photo may not be suitable or the 3D photo creation may not
be possible. It is recommended to take a photo (for L) and then move your camera to the right about 5 cm and take
another photo (for R).
● To view the created 3D photo with 3D effect, you need the 3D Eyewear
“Optional accessories” (p. 7)
1 Display the option menu in the thumbnail view
2 Select [Multi Shot 3D]
select
Slideshow Settings
Multi Shot 3D
Change Size
access
3 Select two photos for L (left) and R (right)
Media Player
Photo Multi Shot 3D
All photos
(red)
● You can only select photos of the same recorded date and same
pixels.
● You may not be able to view the created 3D photo properly if you
select the photos for L and R oppositely.
View
Select
Select
EXIT
RETURN
Info
Option Menu
Using Media Player
Option Menu
SD Card
4 Create the 3D photo
● If your selected photos are not suitable for the 3D photo, the error message will be displayed and
will return to the photo selection screen (step 3).
● To save the 3D photo in the SD Card
The 3D image will be saved onto your media.
Continue?
Yes
select [Yes]
save
No
After finishing saving the photo, the photo selection screen will be displayed (step 3). Select
photos again to create another 3D photo or exit from [Multi Shot 3D] mode.
63
■ To enjoy the saved 3D photos
Saved 3D photos are displayed in the Thumbnail screen. Wear the 3D Eyewear and enjoy the 3D photos.
Example: Thumbnail
Media Player
Photo
All photos
Saved 3D photo
Photo Settings
Setup the settings for Photo mode.
1 Display the option menu
2 Select [Slideshow Settings]
3 Select the items and set
Option Menu
Slideshow Settings
Slideshow Settings
Frame
Colour Effect
Transition Effect
Screen Mode
Burst Playback
Interval
Repeat
Back Ground Music
Off
Off
Fade
Normal
Off
5 seconds
On
select
access / store
Note
● Picture quality may become lower depending on the slideshow settings.
● Picture setting may not work depending on the slideshow settings.
Menu
Slideshow Settings
Using Media Player
64
Item
Adjustments / Configurations (alternatives)
Frame
Selects the frame type of the slideshow
[Off] / [Multi] / [Collage] / [Drift (+ calendar)] / [Drift] / [Gallery (+ calendar)] /
[Gallery] / [Cinema]
[Multi]:
9 photos are displayed orderly at once.
[Collage]:
Each photo is displayed at a random position and random scale.
[Drift (+ calendar)] / [Drift]:
Photos are displayed like flow images.
● You can select to display the calendar or not. The month of calendar is turned
by pressing the left or right cursor button.
[Gallery (+ calendar)] / [Gallery]:
The various sizes of photos in the frame are displayed.
● You can select to display the calendar or not. The month of calendar is turned
by pressing the left or right cursor button.
[Cinema]:
Photos are displayed like old films (sepia tone).
Colour Effect
Selects the colour effect of photos on Single view and Slideshow
[Off] / [Sepia] / [Gray scale]
● This function is not available when [Frame] is set to [Drift], [Gallery] or [Cinema].
Transition Effect
Selects the transition effect for switching the photo during the slideshow
[Off] / [Fade] / [Slide] / [Dissolve] / [Motion] / [Random]
[Fade]: The next photo fades in gradually.
[Slide]: The next photo slides and appears from the left side.
[Dissolve]: Each photo is dissolved when switching to the next photo.
[Motion]: Each photo is displayed with an effect of enlarging, reducing, moving
up or moving down.
[Random]: Each transition is selected at random.
● This function is available when [Frame] is set to [Off].
Menu
Item
Adjustments / Configurations (alternatives)
Screen Mode
Selects enlarged or normal viewing on Single view and Slideshow
[Normal] / [Zoom]
● This function is not available when [Frame] is set to [Collage], [Drift], [Gallery] or
[Cinema] or when [Transition Effect] is set to [Motion].
● Depending on the photo size, it may not be fully enlarged to fill the screen, e.g.
portrait style picture.
Burst Playback
Selects whether to display burst photos in a fast-paced slideshow mode
[Off] / [On]
● This function is not available when [Frame] is set to [Drift], [Gallery] or [Cinema]
or when [Transition Effect] is set to [Motion].
Interval
Selects slideshow interval [5] / [10] / [15] / [30] / [60] / [90] / [120] (seconds)
● This function is not available when [Frame] is set to [Drift], [Gallery] or [Cinema]
or when [Transition Effect] is set to [Motion].
Repeat
Slideshow repeat [Off] / [On]
Slideshow Settings
Selects the back ground music during Photo mode
[Off] / [Type1] / [Type2] / [Type3] / [Type4] / [Type5] / [User] / [Auto]
● [Type1 - 5] are the fixed music each installed in this TV.
[User]: Music data in the device registered by yourself will be played back.
To register the music
1. Select the music file
Depending on the condition of the
device, select folders until you reach
the desired music file.
Back Ground Music
Back Ground Music
Type1
select
Register Slideshow BGM?
File
Folder
select
set
[File]: The selected music file will be
registered.
[Folder]: All the music in the folder
which contains the selected
music file will be registered.
access
● If no music has been registered or the device which has the registered music
is removed, no sound will be produced.
[Auto]: Music data stored in the root folder of the current device will be played
back randomly.
● If there is no available music data, no sound will be produced.
Using Media Player
PRIVATE
DCIM
MISC
001photo
002photo
003music
01 song.mp3
2. Select [File] or [Folder]
65
Video mode
● Supported file format
(p. 91, 92)
The thumbnail of video titles in the SD Card or USB Flash Memory will be displayed.
Example: Thumbnail - [Title view]
Media Player
Video
Title view
The preview will start when the title / scene is highlighted if it supports
a preview.
● To turn off the preview
Trip1
Trip2
Trip3
Trip4
Trip5
Room
Nature1
“Video Setup” (p. 67)
● To play back the selected title
Nature2
Nature3
Nature4
Nature5
Nature6
2011_4
2011_7
Select the title
Start playback
(red)
● If you stopped the last playback on the
way, the confirmation screen is displayed
to select whether to start from where you
stopped last time or from the beginning.
2011_9
Access
Select
Play
EXIT
RETURN
SD Card
Info
Option Menu
Drive Select
Contents Select
: Error display
: The file does not support thumbnail view.
■ Playback from the selected scene in the title (SD-Video or AVCHD)
Playback of the selected scene will start to the end of the title.
1 Select the title
2 Select the scene
select
3 Start playback
(red)
access
● The structure of titles and scenes may vary depending on the digital video camera used.
● To repeat playback “Video Setup” (p. 67)
■ How to operate in the playback
Example: Playback
SD
19/02/2011 11:21
00:15:39
00:02:05
● To display / hide the operation guide and
information banner
Using Media Player
● To the previous title / scene
(red)
EXIT
RETURN
● To the next title / scene
Operation guide
Information banner
(green)
● To operate the playback
Rewind
Pause (displays the time seek bar) / Playback
Fast forward
Stop
● To jump to the specified time point
While the time seek bar is displayed
Press: Search about 10 seconds
Press and hold: Search rapidly
00:15:39
00:02:05
66
● To change aspect
● To return to thumbnail
■ Video Setup
Setup the settings for Video mode.
● Menu items and selectable options vary depending on the content.
1 Display the option menu
2 Select [Video Setup]
3 Select the items and set
select
Option Menu
Video Setup
Menu
Item
access / store
Adjustments / Configurations (alternatives)
Video Setup
Sets to start the preview of the title or scene in the thumbnail view [Off] / [On]
● Image may not be displayed for an instant in the thumbnail view. Set the preview
[Off] to resolve this.
● Only available in the thumbnail view
Multi Audio,
Dual Mono Audio
Selects between selectable sound tracks (if available)
● It may take several seconds to change the sound.
● Only available during playback
Subtitle
Subtitles On / Off (if available)
● Only available during playback
Subtitle Text
Selects the font type to display subtitles correctly (if available)
● Only available during playback
Aspect Change
[Aspect1]: Displays the content enlarged without distortion.
[Aspect2]: Displays the content full-screen.
[Original]: Displays the content original size.
● You can also change the aspect using the ASPECT button.
● Aspect change may not work depending on the content.
● Only available during playback
Repeat
Playback repeat within the title or selected file (depending on the content)
[Off] / [On]
Title
Selects from a group of titles (if available)
Audio output Settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
● To confirm or change the current sound status
(see above)
1 Display the menu and Select [Sound]
Using Media Player
Video Preview
2 Select [SPDIF Selection] and set
2/2
Sound
select
access
Menu
Item
Sound
SPDIF Selection
SPDIF Selection
Reset to Defaults
Auto
Reset
select
access / store
Adjustments / Configurations (alternatives)
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
67
Music mode
● Supported file format
(p. 92)
The thumbnail of music folders in the SD Card or USB Flash Memory will be displayed.
Example: Thumbnail - [Folder view]
Media Player
Music
Folder view
● To play back the selected folder
Select the folder
Start playback
My Music_1
My Music_2
Access
Select
Play Folder
(red)
My Music_3
EXIT
RETURN
Info
Option Menu
Drive Select
SD Card
Contents Select
■ Playback from File view
Selected file will be played back.
1 Select the folder
2 Select the file
3 Start playback
select
(red)
access
■ How to operate in the playback
Example: Playback
● To display / hide the operation guide
● To the previous track
● To operate the playback
Rewind
● To the next track
(red)
My Song_9
My Favourite
My Music_1
00:02.43 / 00:05.44
(green)
Using Media Player
EXIT
Pause / Playback
RETURN
Fast forward
● To return to thumbnail
Stop
Operation guide
Music Setup
Setup the setting for Music mode (only available in the thumbnail view).
1 Display the option menu
2 Select [Music Setup]
3 Set
Option Menu
Music Setup Menu
Music Setup
Repeat
One
select
access / store
[Folder]: Playback repeat within the
selected folder
[One]: Playback repeat of the selected
one file
68
Using Network Services
(DLNA / VIERA Connect)
DLNA®
This TV is a DLNA Certified™ product.
DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more
convenient to use on a home network. To learn more, visit www.dlna.org.
It allows you to share photos, videos (including 3D images) and music stored in the DLNA Certified media server (for
example, PC with Windows 7 installed, DIGA Recorder, etc.) connected to your home network, and enjoy the contents
on the TV screen.
It also allows you to control the TV with the DLNA Certified equipment connected to your home network. (DLNA
Remote Control)
● For the supported file format (p. 91, 92)
● AVCHD and DivX files are not supported by DLNA functions of this TV, but can be played by Media Player (p. 60).
■ Media server
Store photos, videos or music into the DLNA Certified media server, and then you can enjoy them on the TV.
To use a PC as a media server
Prepare the PC with Windows 7 or ensure the server software is installed on the PC.
“Windows 7” and “TwonkyMedia server 6 (installed on the PC with Windows 7, Windows Vista or Windows XP)”
are the server software that has been tested for compatibility with this TV (as of January, 2011). Any other server
software have not been tested with this TV, therefore compatibility and performance cannot be assured.
● Windows 7
The setup for homegroup settings of Windows 7 is required. For details, refer to the help functions of Windows 7.
● TwonkyMedia server
“TwonkyMedia server” is the product of PacketVideo Corporation.
To obtain the Installation Guides for installing and setting “TwonkyMedia server”, visit the website of TwonkyMedia.
Additional fees may be charged to obtain server software.
Note
● For more information about the server software, please consult each software company.
● When server software for the media server is installed on the PC, the data may be at risk of being accessed by
other people. Please take care of the settings and connections under the network circumstances at the office,
hotel or even at home when not using a router.
■ DLNA Remote Control
You can control the TV with the DLNA Certified equipment.
● To use this function, set [Network Link Settings].
(p. 71)
● “Windows 7” is the OS that has been tested for compatibility of this TV (as of January, 2011). For the operations,
refer to the help functions of Windows 7.
Network connection
Network setup
“Example 1”, “Example 2” (p. 70)
(p. 71 - 74)
(p. 75 - 78)
DLNA operations
VIERA Connect
VIERA Connect is a gateway to the internet services unique to Panasonic.
VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents
such as videos, games, communication tools, etc. from VIERA Connect home screen.
● This TV does not support full web browser function and some features of the websites may not be available.
Network connection
Network setup
Using Network Services (DLNA / VIERA Connect)
To use a DLNA compatible DIGA Recorder as a media server
By connecting a DLNA compatible DIGA Recorder to your home network, you can enjoy and control it as one of the
media servers.
● Please read the manual of your DIGA Recorder to confirm whether the recorder is compatible with DLNA.
“Example 1”, “Example 3” (p. 70)
(p. 71 - 74)
VIERA Connect operations
(p. 19, 78)
69
Network connections
To use only DLNA features, you can operate the features without broadband network environment.
To use VIERA Connect features, you need a broadband network environment.
● If you do not have any broadband network services, please consult your retailer for assistance.
● Set up and connect any equipment required for the network environment. You cannot make settings for the
equipment on this TV. Read the manual of the equipment.
● Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively. If the transfer
speed is not enough, contents may not be played back properly.
Example 1
(For DLNA and VIERA Connect)
Wired connection
Internet
Modem
LAN cable (Unshielded)
Hub or Router
Wireless connection
Access
point
DLNA Certified
media server
(for example, PC,
DIGA Recorder, etc.)
Wireless Adaptor
“Optional accessories” (p. 7)
● Connect to the USB 1 or 2 port.
● Ensure to use a LAN straight cable for this connection.
● If your modem has no broadband router functions, use a broadband router.
● If your modem has broadband router functions but there are no vacant ports, use a hub.
● Ensure that the broadband routers and hubs are compatible with 10BASE-T / 100BASE-TX.
● If you use the equipment compatible only with 100BASE-TX, category 5 LAN cables are required.
Example 2
Using Network Services (DLNA / VIERA Connect)
70
(For DLNA)
You can connect the TV and the equipment directly to use DLNA features.
DLNA Certified media
server
(for example, PC,
DIGA Recorder, etc.)
LAN cable (Unshielded)
● Ensure to use a LAN cross cable for this connection.
Example 3
(For VIERA Connect)
You can connect the TV and the telecommunication equipment directly to use VIERA Connect features.
Internet
LAN cable (Unshielded)
Note
● Contact your Internet Service Provider (ISP) telecommunications company for further assistance regarding the
network equipment.
● Confirm the terms and conditions of the contracts with your Internet Service Provider (ISP) or telecommunications
company. Depending on the contracts, additional fees may be charged or multiple connections to the internet may be
impossible.
Network Setup
● Ensure the connections are completed before starting Network Setup.
“Network connections” (p. 70)
Display the menu and select [Network]
select
Network
access
Network Link settings
Sets the link settings to control this TV from the network equipment via the network.
1 Select [Network Link Settings]
2 Select the items and set
Network Link Settings
Connection Test
Network Connection
Wired
Wireless Network Settings
IP/DNS Settings
Network Link Settings
Access
Software Update
New Software Message
On
Network Status
VIERA Name
DLNA Remote Control
DLNA Remote Volume
Network Remote Control
VIERA
On
On
On
select
access / store
select
access
Menu
Item
Adjustments / Configurations (alternatives)
DLNA Remote Control
Enables to control the TV using Windows 7 via the network [Off] / [On]
DLNA Remote Volume
Enables to control the volume of the TV using Windows 7 via the network
[Off] / [On]
Network Remote
Control
Enables to control the TV from the network equipment (smartphone, etc.)
[Off] / [On]
● Depending on the area, this function may not be available. For details, consult
your local Panasonic dealer.
● For more information of this function (English only):
http://panasonic.jp/support/global/cs/tv/
Using Network Services (DLNA / VIERA Connect)
Network Link Settings
VIERA Name
Sets your favourite name for this TV
● This name will be used as the name of this TV on the screen of the other
network equipment.
71
Wired connection settings
This setting is for the network connection by using the LAN cable.
1 Select [Network Connection] and set to [Wired]
select
Connection Test
Wired
Network Connection
Wireless Network Settings
IP/DNS Settings
Network Link Settings
Software Update
New Software Message
On
Network Status
access / store
If you make the network connection like “Example 2” (p. 70), you do not
have to set [Acquire DNS Address], [Proxy] and [Proxy Port].
2 Select [IP/DNS Settings] and set the items
select
IP/DNS Settings
access
Access
■ [Acquire IP Address] / [Acquire DNS Address]
Sets [IP Address], [Subnet Mask], [Default Gateway] and [DNS Address].
Select [Acquire IP Address] / [Acquire DNS Address] and set to [Auto] (recommended).
● The available settings are displayed automatically.
IP/DNS Settings
Acquire IP Address
IP Address
Subnet Mask
Default Gateway
Acquire DNS Address
DNS Address
Proxy Settings
Auto
Manual settings
([IP Address], [Subnet Mask], [Default Gateway], [DNS Address])
select
Auto
access / store
3 Select [Proxy Settings] and set the items
select
IP/DNS Settings
Using Network Services (DLNA / VIERA Connect)
Acquire IP Address
IP Address
Subnet Mask
Default Gateway
Acquire DNS Address
DNS Address
Proxy Settings
Auto
Auto
Access
■ [Proxy]
Sets Proxy address.
● This is the address of the relay server that is connected to the target server instead of the browser and sends data to
the browser. Setting is required if specified by the provider.
1. Select [Proxy]
2. Enter the address
3. Store
Proxy
Proxy Settings
Host
Proxy
Proxy Port
0
select
select
set
access
● You can set characters by using numeric
buttons.
■ [Proxy Port]
Sets Proxy port number.
● This number is also specified by the provider with the Proxy address.
1. Select [Proxy Port]
2. Move the cursor and enter the number
Proxy Settings
Proxy
Proxy Port
72
access
● After settings, return to the previous menu.
0
4 Select [Connection Test] and access to test
select
Connection Test
Access
access
● Performs automatic testing of the network connection for the TV. (It takes a
while to test.)
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then try again.
Wireless connection settings
This setting is for the wireless network connection.
● Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the
manual of the access point.
1 Select [Network Connection] and set to [Wireless]
select
Connection Test
Wireless
Network Connection
Wireless Network Settings
IP/DNS Settings
Network Link Settings
Software Update
New Software Message
On
Network Status
access / store
2 Select [Wireless Network Settings]
select
Connection Test
Wireless
Network Connection
Wireless Network Settings Access
IP/DNS Settings
Network Link Settings
Software Update
New Software Message
On
Network Status
access
3 Select your desired access point
select
Available Wireless Networks
No.
1
2
3
Network Name(SSID)
Access Point A
Access Point B
Access Point C
Wireless type
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Status
access
: Encrypted access point
● To search access points again
(blue)
● For the information of the
highlighted access point
● For [WPS(Push button)] (p. 18)
(red)
● For [WPS(PIN)] (p. 74)
(green)
● To set manually (p. 74)
(yellow)
4 Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:Network Name(SSID) : Access Point A
Security type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
● If the selected access point is not encrypted, the confirmation screen will be
displayed. It is recommended to select the encrypted access point.
Using Network Services (DLNA / VIERA Connect)
● When the access point is already set, [Current Settings] screen will be
displayed.
To change the settings, select [No] on this screen and go to the next step.
Encryption key
73
5 Enter the encryption key of the access point
Set characters
Wireless Network Settings
Encryption key
A B C D E F G H
U V W X Y Z
I
J
K
L M N O P Q R S T
0
1
2
3
4
5
6
7
8
9
!
:
a
b
c
d
e
f
g
h
i
j
k
l
m n
o
p
q
r
s
t
u
v
w
x
y
z
(
)
+
-
.
*
_ @ /
“
‘
% &
?
,
;
=
$
[
]
~
<
>
{
}
|
`
^
\
Store
select
#
set
● You can set characters by using numeric buttons.
● After settings, return to the previous menu.
6 Select [Connection Test] and access to test
select
Connection Test
Access
Connection Test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
access
● Performs automatic testing of the network
connection for the TV. (It takes a while
to test.)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then try again.
If you continue to have difficulty, please contact your internet service provider.
■ [WPS(PIN)]
Enter the PIN code to the access point, and then select [Connect]
WPS(PIN)
Please register the following PIN codes on the
wireless access point.
PIN code : 12345678
Select ‘Connect’ after entering and saving the
settings on the wireless access point.
Connect
Using Network Services (DLNA / VIERA Connect)
74
■ [Manual]
You can setup SSID, security type, encryption type, and encryption key manually.
Follow the on-screen instructions and set manually.
● When you use 11n (5 GHz) for the wireless system between the Wireless Adaptor and access point, select [AES] for
the encryption type.
Wireless Network Settings
Security Type Settings
Please input the network name(SSID).
Connection will be made with the following settings:Network Name(SSID) : XXXXXXX
Network Name(SSID)
Please select the security type.
XXXXXXX
WPA2-PSK
WPA-PSK
Shared key
Open
Update TV’s software
Accesses the specific website to update TV’s software and search if any software updates are available.
Select [Software Update]
select
Connection Test
Wired
Network Connection
Wireless Network Settings
IP/DNS Settings
Network Link Settings
Software Update
Access
New Software Message
On
Network Status
access
● Follow the on-screen instructions.
Using DLNA® features
● Ensure the preparation of the media server, network connections and network settings are completed.
(p. 69 - 74)
1
Display [VIERA TOOLS] and select [Media Server]
Media Server
2
Select one of the media servers to access
Example: Media server list
select
Media Server
SERVER1
SERVER2
SERVER3
DIGA
EXIT
RETURN
Access
Option Menu
● To display the information of the
highlighted media server
access
Select
3
select
access
4
Info
Available media servers
Total listed number
Select the file
Example: File list
Pixel
Format
3648x2736
JPEG
Select
EXIT
RETURN
View
Media Server
SERVER1
P000102
P000135
P000180
P000214
P000251
P000276
P000293
V100025
V100042
M10054
M10078
Option Menu
2011-10-05
2011-11-20
2011-12-07
2011-12-10
2011-12-19
2011-12-25
2012-01-06
2012-01-12
2012-01-20
2012-01-28
2012-02-09
Info
09:54
13:18
11:31
15:20
12:39
14:06
13:52
15:56
10:08
14:48
19:58
28
Slideshow
select
access
● Depending on the condition of media server, you may need to select the folder
before selecting the file.
● To display the information of the highlighted file
Note
For photo file
[Single view] - Photos are displayed one at a time.
Example:
Single view
Single view
Stop
● To return to list
● To operate Single view
To the previous photo
● To rotate 90°
Slideshow
EXIT
Select
RETURN
To the next photo
Rotate
Operation guide
● To display / hide the operation guide
Stop
(return to list)
(blue)
Using Network Services (DLNA / VIERA Connect)
● Non-playable files are also listed but cannot be selected.
● Turn the TV off, and then on again when changing or reconnecting the network connection.
● You can use the following buttons during playback. Set the code of the remote control to “73” (p. 30).
75
[Slideshow] - Slideshow completes when all photos are viewed within the list.
1 Select the photo file from the list for the first view
2 Start Slideshow
(red)
● To display / hide the operation guide
● To pause (return to Single view)
● To return to list
For video file
Playback - Playback will start.
If you stopped the last playback on the way, the confirmation screen is displayed to select whether to start from where
you stopped last time or from the beginning.
Example: Playback
MEDIA SERVER 19/02/2011 11:21
00:15:39
● To display / hide the
● To operate the playback
00:02:05
operation guide and
Rewind
information banner
[Manual skip]
● Press to skip forward about 30
seconds.
Manual skip
● To the previous content
EXIT
(red)
● To the next content
RETURN
Pause (displays the time seek bar) /
Playback
Operation guide
(green)
Information banner ●
To return to list
● To change aspect
Stop
Using Network Services (DLNA / VIERA Connect)
For music file
Playback - Playback will start.
Example: Playback
● To display / hide the operation guide
My Song_9
My Favourite
My Music_1
00:02.43 / 00:05.44
● To operate the playback
Rewind
EXIT
Pause / Playback
RETURN
Fast forward
● To the previous track
(red)
● To the next track
(green)
● To return to list
Stop
Operation guide
For DIGA Recorder
Control the DIGA Recorder
The screen of the DIGA Recorder will be displayed. You can control the functions of the DIGA Recorder with this TV
remote control according to the operation guide.
Example:
● Before operating, register this TV on the DIGA Recorder.
All
● For details, read the manual of the DIGA Recorder.
DIRECT NAVIGATOR (Grouped Titles)
Not Viewed
Movie
OK
RETURN
Time Remaining 36:17 (DR)
Sports
19.08(Wed) Journal Télévisé / Météo
AV1
19.08(Wed)
Video (AVCHD)
Bibel TV das Gespräch
19.08(Wed)
Select
HDD
Social/Economy
Liberty TV FR
Bibel TV
76
Fast forward
Start Time 11:01
Titles 27
WDR Aachen
18.08(Tue) WDR aktuell
WDR Wuppertal
18.08(Tue) WDR aktuell
Page 005/005
OPTION
Delete Title
Option menu for each content
Setup the settings for Photo, Video and Music file operations.
1 Display the
2 Select [Slideshow Settings], [Video Setup]
option menu
or [Music Setup]
3 Select the items and set
select
Option Menu
access / store
Slideshow Settings
Video Setup
Music Setup
select
access
Menu
Item
Adjustments / Configurations (alternatives)
Slideshow Settings
Music Setup
Interval
Selects slideshow interval [5] / [10] / [15] / [30] / [60] / [90] / [120] (seconds)
● This function is not available when [Transition Effect] is set to [Motion].
Repeat
Slideshow repeat [Off] / [On]
Back Ground Music
Selects the back ground music during Photo mode
[Off] / [Type1] / [Type2] / [Type3] / [Type4] / [Type5]
Video Preview
Sets to start the preview of the title or scene in the thumbnail screen [Off] / [On]
● Image may not be displayed for an instant in the thumbnail screen. Set the
preview [Off] to resolve this.
Multi Audio,
Dual Audio,
Dual Mono Audio
Selects between selectable sound tracks (if available)
● It may take several seconds to change the sound.
● Only available during playback
Subtitle
Subtitles On / Off (if available)
● Only available during playback
Subtitle Text
Selects the font type to display subtitles correctly (if available)
● Only available during playback
Subtitle Language
Selects the language in which subtitles should appear (if available)
● Only available during playback
Aspect Change
[Aspect1]: Displays the content enlarged without distortion.
[Aspect2]: Displays the content full-screen.
[Original]: Displays the content original size.
● You can also change the aspect using the ASPECT button.
● Aspect change may not work depending on the content.
● Only available during playback
Repeat
Playback repeat within the selected file [Off] / [On]
Repeat
Playback repeat [Off] / [Folder] / [One]
[Folder]: Playback repeat within the selected folder.
[One]: Playback repeat of the selected one file.
Using Network Services (DLNA / VIERA Connect)
Video Setup
Transition Effect
Selects the transition effect for switching the photo during the slideshow
[Off] / [Fade] / [Slide] / [Dissolve] / [Motion] / [Random]
[Fade]: The next photo fades in gradually.
[Slide]: The next photo slides and appears from the left side.
[Dissolve]: Each photo is dissolved when switching to the next photo.
[Motion]: Each photo is displayed with an effect of enlarging, reducing, moving
up or moving down.
[Random]: Each transition is selected at random.
77
Audio output settings (for video contents)
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)
terminal.
● To confirm or change the current sound status
(p. 67)
1 Display the menu and Select [Sound]
2 Select [SPDIF Selection] and set
2/2
Sound
SPDIF Selection
Reset to Defaults
select
select
access
Menu
Item
Sound
SPDIF Selection
Auto
Reset
access / store
Adjustments / Configurations (alternatives)
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
and HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output as
Dolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.
[PCM]: Digital output signal is fixed to PCM.
VIERA Connect
You can access VIERA Connect and enjoy various network contents.
● VIERA Connect requires a broadband internet connection. Dial-up internet connections cannot be used.
● Ensure the network connections and network settings are completed.
“Network connections” (p. 70), “Network Setup” (p. 71 - 74)
● For details about VIERA Connect operation
(p. 19)
● Setup menu (Items in [Setup] may change without notice.)
Using Network Services (DLNA / VIERA Connect)
78
Customize HomeScreen
Changes the position of each services on VIERA Connect home screen
My Account
Confirms or removes the account information of the TV you entered on VIERA
Connect
Lock
Sets to restrict access to some services
Restrictions
Sets to restrict reveal of the restricted services
Beep
Sets beep sound On or Off when operating VIERA Connect
Notices
Displays the information of VIERA Connect
Note
● Be sure to update the software when a software update notice is displayed on the TV screen. If the software is not
updated, you will not be able to use VIERA Connect.
You can update the software later manually. [Software Update] in [Network] (p. 74)
● VIERA Connect home screen is subject to change without notice.
● The services through VIERA Connect are operated by their respective service providers, and service may be
discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
● Some content may be inappropriate for some viewers.
● Some content may only be available for specific countries and may be presented in specific languages.
● Depending on the connection environment, the internet connection may be slow or may not be successful.
● During the operation, audio signal is output from AV1, DIGITAL AUDIO OUT and HDMI2 (ARC function) terminals.
But no video signals are output. AV1 can output audio signal if [AV1 out] is set to [Monitor] in the Setup Menu (p. 42).
To use HDMI2 with ARC function, connect an amplifier that has ARC function (p. 80) and set to use theatre speakers
(p. 86).
● You can restrict access to VIERA Connect. [Child Lock] (p. 55)
● Turn the TV off, and then on again when changing or reconnecting the network connection.
Link Functions (Q-Link / VIERA Link)
Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 81)
VIERA Link (HDAVI Control™) connects the TV and the equipment with VIERA Link function, and enables easy control,
convenient recording, playback, energy saving, creating home theatre, etc., without complicated setting.
(p. 82 - 86)
You can use Q-Link and VIERA Link functions together.
● This TV supports “HDAVI Control 5” function. But available features are depending on the connected equipment’s
version of HDAVI Control. Please read the manual of the equipment to confirm the version.
● VIERA Link features may be available even with other manufacturers’ equipment supporting HDMI CEC.
Summary of Q-Link and VIERA Link features
Q-Link (SCART connection)
Connected equipment
Features
Preset download
Easy playback
Power on link
Power off link
Direct TV Recording
Connection
DVD Recorder /
VCR with Q-Link
function
SCART cable
DVD Recorder /
VCR with Q-Link
function
● Use fully wired SCART cable.
● Connect the DVD Recorder / VCR supporting Q-Link to the
TV’s AV1 terminal via a SCART cable.
VIERA Link (HDMI connection)
Connected equipment
∗2 ∗5
DVD Player / Blu-ray
Disc Player with
VIERA Link function
–
∗3
∗3
∗2 ∗4
∗2
–
∗3
–
∗3
–
–
–
∗1
HD Video Camera /
LUMIX Camera with
VIERA Link function
–
–
–
∗1
–
∗1
–
Connection
HDMI cable
DIGA Recorder / DVD Player /
Blu-ray Disc Player /
HD Video Camera / LUMIX Camera
with VIERA Link function
Link Functions (Q-Link / VIERA Link)
Features
Preset download
Easy playback
Power on link
Power off link
Reduce unnecessary power
consumption in Standby
Auto standby for unnecessary
equipment
Pause Live TV programme
Direct TV Recording
Control the menu of the connected
equipment by VIERA remote control
Speaker control
DIGA Recorder with
VIERA Link function
● Use fully wired HDMI compliant cable.
● Connect the equipment supporting VIERA Link to the TV’s HDMI1 or HDMI2 terminal via an HDMI cable.
● About HDMI cable for connecting Panasonic HD Video Camera or LUMIX Camera, read the manual of the
equipment.
79
VIERA Link (HDMI and Audio out connections)
Connected equipment
Features
Preset download
Easy playback
Power on link
Power off link
Reduce unnecessary power
consumption in Standby
Auto standby for unnecessary
equipment
Pause Live TV programme
Direct TV Recording
Control the menu of the connected
equipment by VIERA remote control
Speaker control
Blu-ray Disc theatre
with VIERA Link
function
–
∗6
Player theatre with
VIERA Link function
–
∗6
∗3
–
∗3 ∗7
Amplifier with
VIERA Link function
–
–
–
–
∗3 ∗7
–
–
–
–
∗1
∗3
–
–
∗1
–
● To use Player theatre / Blu-ray Disc theatre
Connection
Speaker system
HDMI cable
Player theatre / Blu-ray Disc
theatre with VIERA Link
function
Optical digital
audio cable
● To use Amplifier
Speaker system
or
HDMI
cable
Amplifier with
VIERA Link function
SCART cable
∗8
HDMI cable
DIGA Recorder with
VIERA Link function
SCART cable
HD Video Camera / LUMIX Camera with VIERA Link function
Link Functions (Q-Link / VIERA Link)
● Use fully wired HDMI compliant cable.
● Connect the equipment supporting VIERA Link to the TV’s HDMI2 terminal via an HDMI cable.
● Use fully wired SCART cable.
● If you use a SCART cable for audio output, connect the equipment supporting VIERA Link to the TV’s AV1 terminal
and set [AV1 out] to [Monitor] in the Setup Menu (p. 42).
● Use the optical digital audio cable or SCART cable for audio output from the TV.
∗1: Available with the equipment which has “HDAVI Control 2
or later” function.
∗2: Available with the equipment which has “HDAVI Control 3
or later” function.
∗3: Available with the equipment which has “HDAVI Control 4
or later” function.
∗4: Available with a DIGA Recorder which has HDD.
∗5: This function is available regardless of the version of
HDAVI Control when the recorder supports Q-Link and is
connected via SCART cable.
∗6: While playing a disc.
∗7: Except for watching a disc.
∗8: If the connected equipment has “HDAVI Control 5”
function, you do not have to use this audio cable
(Optical digital audio cable or SCART cable).
In this case, connect the equipment to the TV’s
HDMI2 terminal via an HDMI cable.
VIERA Link Control of compatible equipment
[VIERA Link Control] (p. 84)
● Table below displays maximum number of compatible equipment that can be controlled by VIERA Link Control. This
includes connections to equipment already connected to the TV.
For example, DIGA Recorder connected to Amplifier which is connected to the TV via an HDMI cable.
Type of the equipment
80
Maximum number
Recorder (DIGA Recorder, etc.)
3
Player (DVD Player, Blu-ray Disc Player, HD Video Camera, LUMIX Camera, Digital Camera,
Player theatre, Blu-ray Disc theatre, etc.)
3
Audio system (Player theatre, Blu-ray Disc theatre, Amplifier, etc.)
1
Tuner (Set top box, etc.)
4
Q-Link
Preparations
● Connect the DVD Recorder / VCR with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC (a trademark of Metz Corporation)”, “Easy Link (a trademark of Philips
Corporation)”, “Megalogic (a trademark of Grundig Corporation)”, “SMARTLINK (a trademark of Sony Corporation)”
● Q-Link connection (p. 79)
● Use fully wired SCART cable.
● Set up the DVD Recorder / VCR. Read the manual of the recorder.
● Q-Link terminal setup in the Setup Menu
[AV1 out] (p. 42)
● Download preset - channel, language and country / region settings “Preset download” (see below)
Features available
Preset download
Channel, language and country settings can be downloaded to the recorder.
● DVB-C channel settings cannot be downloaded.
● To download settings
[Download] (p. 43), [Auto Setup] (p. 15, 16, 46)
Direct TV Recording - What you see is What you record
Records the current programme in DVD Recorder / VCR immediately.
● Set the code of the remote control to “73” (p. 30).
● Available conditions:
Picture source
Analogue
Mode
Recording from
TV
TV monitor out
AV
Recorder’s tuner
TV
TV monitor out
AV (watching recorder’s tuner)
AV
Recorder’s tuner
AV (watching recorder’s external input)
AV
Recorder’s external input
AV (watching TV’s external input)
AV
TV monitor out
● When Direct TV Recording is performed, the recorder is automatically turned on if it is in Standby mode.
● You can change channel or turn the TV off while the recorder is recording from its own tuner.
● Changing channel is not available while the recorder is recording from the TV tuner.
■ To stop recording
Unlock the tuner
Tuner Locked
Press EXIT to unlock and stop recording
Power on link and Easy playback
Set Power on Link [On] in the Setup Menu to use this function [Power on Link] (p. 42)
When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment are activated, the
TV is turned on and input mode is switched automatically so that you can view the content. (Only when the TV is in
Standby mode.)
Link Functions (Q-Link / VIERA Link)
DVB
Power off link
Set Power off Link [On] in the Setup Menu to use this function [Power off Link] (p. 42)
When TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the videocassette or
disc is not active.)
● This function works even if the TV enters Standby mode automatically by auto power standby function.
Note
● Some recorders are not applicable. Read the manual of the recorder.
81
VIERA Link “
”∗
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 5” function.
Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and
SCART cables allow you to interface them automatically (p. 79, 80).
These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
● Some functions are not available depending on the equipment’s version of HDAVI Control. Confirm the connected
equipment’s version of HDAVI Control.
● VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known
as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.
As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
● Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.
● About applicable Panasonic equipment, consult your local Panasonic dealer.
Preparations
● Connect the equipment supporting VIERA Link.
● VIERA Link connection
(p. 79, 80)
● Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilised.
Recommended Panasonic’s HDMI cable part number:
• RP-CDHS15 (1.5 m)
• RP-CDHS30 (3.0 m)
• RP-CDHS50 (5.0 m)
● Use fully wired SCART cable.
● Set up the connected equipment. Read the manual of the equipment.
● For optimal recording, the settings of the recorder may need to be changed. For details, read the manual of the
recorder.
● Download preset - channel, language and country / region settings “Preset download” (see below)
● Set [VIERA Link] to [On] in the Setup Menu. [VIERA Link] (p. 42)
● Set up the TV.
After connection, turn the equipment on and then switch the TV on.
Select the input mode from HDMI1 or HDMI2 (p. 29), and make sure that an image is displayed correctly.
This setup should be done each time when the following conditions occur:
• for the first time
• when adding or reconnecting equipment
• when changing setup
Features available
Link Functions (Q-Link / VIERA Link)
Preset download
Channel, language and country / region settings can be downloaded to the recorder.
● DVB-C channel settings cannot be downloaded.
● To download settings
[Download] (p. 43), [Auto Setup] (p. 15, 16, 46)
Easy playback
Automatic input switching - When the connected equipment is operated, input mode is switched automatically. When it
is stopped operating, input mode is returned.
Power on link
Set Power on Link [On] in the Setup Menu to use this function [Power on Link] (p. 42)
When the connected equipment starts playback or direct navigator / function menu for the equipment are activated, the
TV is automatically turned on. (Only when the TV is in Standby mode.)
Power off link
Set Power off Link [On] in the Setup Menu to use this function [Power off Link] (p. 42)
When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.
● This function will work even if the TV enters Standby mode automatically by auto power standby function.
82
Reduce unnecessary power consumption in Standby [Standby Power Save]
Set Standby Power Save [On] in the Setup Menu to use this function
[Standby Power Save] (p. 42)
The power consumption in Standby mode of the connected equipment is controlled higher or lower in synchronisation
with the TV on / off state to reduce the consumption.
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power
consumption of the connected equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption is increased
to make startup time fast.
● This function is effective if the connected equipment can change the power consumption in Standby mode and is set
to higher consumption.
● This function works when [Power off Link] is set to [On].
Auto standby for unnecessary equipment [Intelligent Auto Standby]
Set Intelligent Auto Standby [On (With reminder)] or [On (No reminder)] in the Setup Menu to use this function
[Intelligent Auto Standby] (p. 43)
When the TV is on, non-watched or non-used connected equipment goes into Standby mode automatically to reduce
the power consumption. For example, when the input mode is switched from HDMI or when Speaker Selection is
changed to [TV] (except for watching a disc).
● If you select [On (With reminder)], the on-screen message will be displayed before the connected equipment turns to
standby.
● This function may not work properly depending on the connected equipment. If required, set to [Off].
Direct TV Recording - What you see is What you record [Direct TV Rec]
1
Display [VIERA TOOLS] and select [VIERA Link]
select
access
VIERA Link
2
Select [Direct TV Rec] and start recording
select
VIERA Link Menu
Start
Start
Recorder
Home Cinema
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
access / start
● You can also start recording directly
when the code of the remote control is
“73” (p. 30).
Link Functions (Q-Link / VIERA Link)
Records the current programme in the DIGA Recorder immediately.
● If you connect a variety of recorders including other manufacturers’ recorders at the same time, connect the DIGA
Recorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2 for two recorders,
connect the DIGA Recorder to HDMI1.
● If you cannot operate, check the settings and the equipment.
“Summary of Q-Link and VIERA Link features” (p. 79, 80), “Preparations” (p. 82)
● To record the programme which DIGA Recorder does not support, SCART connection is required and the programme
is recorded by Q-Link function (p. 81).
● Depending on the programme, SCART connection may be required to record.
● You can change channel or turn the TV off while the recorder is recording from its own tuner.
● You can not change channel while the recorder is recording from the TV tuner.
■ To stop recording
Select [Stop] in [Direct TV Rec]
select
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Stop
Recorder
Home Cinema
access / stop
● You can also stop recording directly.
Unlock the tuner
Tuner Locked
Press EXIT to unlock and stop recording
83
Pause Live TV programme [Pause Live TV]
You can pause the current TV programme and resume later.
The current TV programme will be recorded on HDD of the connected DIGA Recorder.
● This function is available with a DIGA Recorder which has HDD.
● If you connect a variety of recorders including other manufacturers’ recorders at the same time, connect the DIGA
Recorder which has HDD to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2 for
two recorders, connect the DIGA Recorder which has HDD to HDMI1.
● If you cannot operate, check the settings and the equipment.
“Summary of Q-Link and VIERA Link features” (p. 79, 80), “Preparations” (p. 82)
1
Display [VIERA TOOLS] and select [VIERA Link]
select
access
VIERA Link
2
Select [Pause Live TV] and pause
The TV picture will be paused.
select
VIERA Link Menu
Start
Start
Recorder
Home Cinema
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
access / pause
● The current TV programme is recorded
on HDD from where it was paused.
● If the paused TV picture disappears after
a few minutes, press OPTION button to
restore the pause picture.
● Follow the operation guide to operate
[Pause Live TV] function.
■ To operate [Pause Live TV]
● Operations may vary depending on the recorder. In this case,
follow the operation guide or read the manual of the recorder.
Search backward
Pause
Playback
Search forward
Link Functions (Q-Link / VIERA Link)
Stop
● If you stop playback, the recorded
programme will be deleted from
HDD.
■ To return to current TV (Stop playback of [Pause Live TV] / cancel pause)
Select [Yes]
Pause Live TV
select
stop
Stop Pause Live TV?
No
Yes
● If you stop playback or cancel pause, the recorded programme will be deleted from HDD.
Control the menu of the connected equipment by VIERA remote control
[VIERA Link Control]
You can control some functions of the connected equipment with this TV remote control pointing at the TV’s signal
receiver.
● If you cannot operate, check the settings and the equipment.
“Summary of Q-Link and VIERA Link features” (p. 79, 80), “Preparations” (p. 82)
● For details of the operations for the connected equipment, read the manual of the equipment.
1
Display [VIERA TOOLS] and select [VIERA Link]
VIERA Link
84
select
access
2
Select [VIERA Link Control]
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
3
select
VIERA Link Menu
Start
Start
Recorder
Home Cinema
access
Select the equipment to access
Select the type of the connected equipment and access.
select
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Start
Recorder
Home Cinema
H
Ci
access
[Recorder] / [Player] / [Home Cinema] / [Video Camera] / [LUMIX] / [Digital Camera] / [Other]
● The displayed item may vary depending on the connected equipment.
● [Home Cinema] means Player theatre, Blu-ray Disc theatre or Recorder theatre.
● [Other] means Tuner set top box.
The menu of the accessed equipment will be displayed.
(Input mode will be changed automatically)
4
Operate the menu of the equipment
● Set the code of the remote control to “73” (p. 30).
Follow the operation guide
● To display the operation guide
If other manufacturers’ equipment is accessed, Setup / Contents Selection menu may be displayed.
● Available VIERA remote control buttons depend on the connected equipment.
■ If multiple recorders or players are connected
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Start
Recorder2
Home Cinema
The number is given from the TV’s lower number of HDMI terminal connected
to the same type equipment. For example, two recorders to HDMI1 and
HDMI2, the recorder connected to HDMI1 is displayed as [Recorder1], and the
recorder connected to HDMI2 is displayed as [Recorder2].
[Recorder1-3 / Player1-3]
■ If you access non-VIERA Link equipment
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Start
Recorder
Home Cinema
The type of the connected equipment is displayed.
Although you can access the connected equipment, you cannot operate it.
Use its own remote control to operate the equipment.
Link Functions (Q-Link / VIERA Link)
Note
● Some operations may not be available depending on the equipment. In this case use its own remote control to
operate the equipment.
85
Speaker control [Speaker Selection]
You can control the theatre speaker with this TV remote control pointing at the TV’s signal receiver.
● If you cannot operate, check the settings and the equipment.
“Summary of Q-Link and VIERA Link features” (p. 79, 80), “Preparations” (p. 82)
1
Display [VIERA TOOLS] and select [VIERA Link]
select
access
VIERA Link
2
Select [Speaker Selection]
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
3
select
VIERA Link Menu
Start
Start
Recorder
Home Cinema
access
Set to [Home Cinema] or [TV]
select
store
[Home Cinema]:
The sound is from theatre speakers. Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned
on if it is in Standby mode.
● Volume up / down
● Mute
Link Functions (Q-Link / VIERA Link)
● The sound of TV speakers is mute.
● When the equipment is turned off, TV speakers will be active.
[TV]:
TV speakers are active.
Multi-channel sound
If you want to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect it with HDMI cable and
Optical digital audio cable (p. 80), and then select [Home Cinema]. If your Amplifier has “HDAVI Control 5” function,
you only need to connect it with HDMI cable to the TV’s HDMI2 terminal.
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an HDMI cable from the DIGA Recorder
to the Amplifier (p. 80).
Note
● These functions may not work properly depending on the connected equipment.
● Image or sound may not be available for the first few seconds when input mode is switched.
● “HDAVI Control 5” is the newest standard (as of November, 2011) for HDAVI Control compatible equipment. This
standard is compatible with conventional HDAVI equipment.
● To confirm this TV’s version of HDAVI Control [System Information] (p. 45)
86
External Equipment
These diagrams show our recommendations for connection of your TV to various pieces of equipment.
For other connections, consult the instructions for each piece of equipment, the basic connection (p. 12 - 14), the table
(p. 89), and the specifications (p. 102, 103).
● Check the type of terminals and cable plugs are correct when connecting.
To watch DVDs
(Listening)
(Viewing)
DVD Player
USB devices
Rear of the TV
Wireless Adaptor
Communication
Camera
HDMI equipment
Fully wired HDMI
compliant cable
Camcorder
● HDMI connection
External Equipment
Recorder / Player
(p. 94)
87
To listen with speakers
Optical digital audio
cable
Amplifier with
speaker system
Rear of the TV
To enjoy the sound from the external equipment in
multi-channel sound (e.g. Dolby Digital 5.1ch), connect the
equipment to the amplifier.
For the connections, read the manuals of the equipment and
amplifier.
Headphones
Less than
10 cm
(M3 stereo
mini plug)
Ferrite core - Small size (supplied)
Installing the Ferrite core
Pull back the tab
Wind the cable twice
Close
External Equipment
● To adjust volume
[Headphone Volume] (p. 40)
Camcorder / Game equipment
(Viewing)
Camcorder
(Listening)
Game equipment
88
Types of connectable equipment to each terminal
Terminal
AV2
USB 1 / 2
HDMI 1 / 2
ETHERNET
DIGITAL
AUDIO OUT
VIDEO
COMPONENT
AV1
Features
To record / playback videocassettes / DVDs (VCR /
DVD Recorder)
To watch 3D contents (Blu-ray Disc Player)
∗1
To watch satellite broadcasts (Set top box)
To watch DVDs (DVD Player)
To watch camcorder images (Video camera)
To play games (Game equipment)
∗2
To use amplifier with speaker system
∗3
To use network services
Q-Link
VIERA Link
(with HDMI)
Direct TV Recording
External Equipment
: Recommended Connection
∗1: Use HDMI1 for automatic input switching.
∗2: Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio
Return Channel) function.
∗3: Use USB 2 port for connecting the Communication Camera.
89
Technical Information
Auto Aspect
The optimum size and aspect can be chosen automatically, and you can enjoy finer images.
(p. 23)
■ Aspect Control Signal
[WIDE] will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART / HDMI
terminal is found.
The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio.
This function will work in any aspect mode.
Aspect Control Signal
Input terminal
Cable
RF
AV1 / AV2
(Composite)
AV2
(Component)
HDMI1
HDMI2
Input signal format
Technical Information
DVB-C
DVB-T
PAL B, G, H, I, D, K
SECAM B, G, L, L’, D, K
PAL 525/60 6.5 MHz
PAL 525/60 6.0 MHz
PAL 525/60 5.5 MHz
M.NTSC 6.5 MHz
M.NTSC 6.0 MHz
M.NTSC 5.5 MHz
PAL
SECAM
PAL 525/60
M.NTSC
NTSC
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
Widescreen signal
(WSS)
Control signal
through SCART (pin8) /
HDMI terminal
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
■ Auto mode
Auto mode determines the best aspect ratio to fill the screen using a four step process (WSS, Control signal through
SCART / HDMI terminal, Letterbox detection or Justify to fill the screen).
This process may take several minutes, depending on the darkness of the image.
Letterbox detection:
If black bands at the top and bottom of the screen are detected, Auto mode chooses the best ratio and expands the
image to fill the screen.
If no aspect signals are detected, Auto mode enhances the image for optimum viewing pleasure.
Note
● The ratio varies depending on the programme, etc. If the ratio is out of the standard 16:9, black bands at the top and
bottom of the screen may appear.
● If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. Read the manual of the VCR.
90
Supported file format in Media Player and media servers
■ Photo
Format
File extension
.jpg
JPEG
Image resolution
(pixel)
.jpeg
.mpo
8×8
to
30,719 × 17,279
File extension
Video codec
Details / Restrictions
DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
● Progressive JPEG is not supported.
■ Video
Container
Audio codec
Details / Restrictions
AVCHD
.mts
H.264
Dolby Digital
AVCHD Standard Ver. 2.0
(AVCHD 3D, AVCHD Progressive)
● The data may not be available if a folder
structure on the device is modified.
SD-Video
.mod
MPEG1
MPEG2
Dolby Digital
MPEG Audio
SD-Video Standard Ver. 1.31
(Entertainment Video Profile)
● The data may not be available if a folder
structure on the device is modified.
.mov
.qt
DivX4
DivX3
DivX5
DivX6
H.264 BP/MP/HP
Motion JPEG
MPEG1
MPEG2
MPEG4 SP/ASP
AAC
Dolby Digital
Dolby Digital
Plus
DTS core
HE-AAC
LPCM
MPEG Audio
MP3
DivX3
DivX4
DivX5
DivX6
H.264 BP/MP/HP
MPEG1
MPEG2
MPEG4 SP/ASP
VC-1
Windows Media
Video Ver. 9
AAC
ADPCM
Dolby Digital
Dolby Digital
Plus
DTS core
HE-AAC
LPCM
MPEG Audio
MP3
WMA
WMA Pro
DivX3
DivX4
DivX5
DivX6
H.264 BP/MP/HP
MPEG1
MPEG2
MPEG4 SP/ASP
AAC
Dolby Digital
Dolby Digital
Plus
DTS core
HE-AAC
MPEG Audio
MP3
MOV
AVI
.mkv
∗1: Some products of before the year
2004 may not be available. The
compatibility with future products is
not guaranteed.
● Certified to play DivX Plus HD video file
in Media Player
For details of DivX
(p. 93)
● Some subtitles or chapter functions may
not be available.
Technical Information
MKV
.avi
.divx
● This TV supports Motion JPEG
recorded by Panasonic LUMIX
Camera∗1.
● This TV is not available for playing back
Motion JPEG with the media server.
91
Container
File extension
Video codec
Audio codec
Details / Restrictions
.asf
.wmv
DivX3
DivX4
DivX5
DivX6
MPEG4 SP/ASP
VC-1
Windows Media
Video Ver. 9
AAC
Dolby Digital
Dolby Digital
Plus
HE-AAC
LPCM
MP3
WMA
WMA Pro
● Copy-protected files cannot be played
back.
MP4
.f4v
.m4v
.mp4
DivX3
DivX4
DivX5
DivX6
H.264 BP/MP/HP
MPEG1
MPEG2
MPEG4 SP/ASP
AAC
Dolby Digital
Dolby Digital
Plus
HE-AAC
MPEG Audio
MP3
● This TV supports this container
recorded by Panasonic products. For
details, read the manual of the products.
FLV
.flv
H.264
AAC
MP3
–
3GPP
.3gp
.3g2
H.264
MPEG4 SP/ASP
AAC
HE-AAC
–
ASF
H.264∗2
MPEG1
MPEG2
VC-1∗2
.mpg
.mpeg
.vob
.vro
PS
∗2: This codec can be played back only in
Media Player.
LPCM
MPEG Audio
MP3∗2
AAC
Dolby Digital
Dolby Digital
Plus
DTS core∗3
HE-AAC
MPEG Audio
MP3∗3
H.264
MPEG1
MPEG2
VC-1∗3
.m2ts
.tp
.trp
.ts
TS
AAC∗2
Dolby Digital
Dolby Digital
Plus∗2
HE-AAC∗2
∗3: This codec can be played back only in
Media Player.
Technical Information
■ Music
Codec
File extension
Restrictions
MP3
.mp3
–
AAC
.m4a
● Copy-protected files cannot be played back.
WMA
WMA Pro
.wma
● Copy-protected files cannot be played back.
● WMA Lossless is not supported.
FLAC
.flac
–
Note
● Some files may not be played back even if they fulfil these conditions.
● Do not use two-byte characters or other special codes for data.
● The device may become unusable with this TV if the file or folder names are changed.
92
DivX
DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video up to 1080p HD including premium content.
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX
videos.
■ Subtitle text file of DivX
Subtitles format - MicroDVD, SubRip, TMPlayer
● The DivX video file and subtitles text file are inside the same folder, and the file names are the same except for the
file extensions.
● If there are more than one subtitles text files inside the same folder, they are displayed in the following order of
priority:
“.srt”, “.sub”, “.txt”.
● To confirm or change the current subtitle status while playing DivX content, press the OPTION button to display
Option Menu.
● Depending on the methods used to create the file or the state of recording, only parts of the subtitles may be
displayed, or the subtitles may not be displayed at all.
Note
● Depending on how you make SD Card, USB Flash Memory or the media server, files and folders may not be
displayed in the order you numbered.
● Depending on how you create the files and the structure of folders, the files and folders may not be displayed.
● When there are many files and folders, operation may take time to complete or some files may not be displayed or
playable.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD section in the Setup Menu. Go to vod.divx.com for more information
on how to complete your registration.
■ To show DivX VOD registration code
[DivX® VOD] (p. 44)
● If you want to generate the new registration code, you have to deregister the current registration code.
After playing DivX VOD content once, the confirmation screen to deregister will be displayed in [DivX® VOD] in the
Setup Menu. If you press the OK button on the confirmation screen, the deregistration code will be generated and
you will not be able to play any contents that you purchased using the current registration code.
You will obtain the new registration code by pressing the OK button on the deregistration code screen.
● If you purchase DivX VOD content using a registration code different from this TV’s code, you will not be able to play
this content. ([Your device is not authorized to play this DivX protected video.] is displayed.)
■ Regarding DivX content that can only be played a set number of times
Technical Information
Some DivX VOD content can only be played a set number of times.
When you play this content, the remaining number of plays is displayed. You cannot play this content when the number
of remaining plays is zero. ([This DivX rental has expired.] is displayed.)
● When playing this content, the number of remaining plays is reduced by one in the following conditions:
• If you exit the current application.
• If you play the other content.
• If you go to the next or previous content.
93
Devices for recording or playing back
■ SD Card
Card format:
SDXC Card - exFAT
SDHC Card / SD Card - FAT16 or FAT32
Compliant card type (maximum capacity):
SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB), miniSD Card (2 GB) (requiring
miniSD adaptor)
● If miniSD Card is used, insert / remove it together with the adaptor.
● Check the latest information on the card type at the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
● Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
2.1 mm
32 mm
24 mm
■ USB Flash Memory (for playing back in Media Player)
USB Flash Memory format: FAT16, FAT32 or exFAT
● A USB HDD formatted by PC is not guaranteed in Media Player.
Note
● Data modified with a PC may not be displayed.
● Do not remove the device while the TV is accessing data. Otherwise this can damage device or TV.
● Do not touch the pins on the device.
● Do not subject the device to a high pressure or impact.
● Insert the device in the correct direction. Otherwise this can damage device or TV.
● Electrical interference, static electricity, or erroneous operation may damage the data or device.
● Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV.
Panasonic is not liable for any deterioration or damage of recorded data.
HDMI connection
HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying with a
non-compression standard.
HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the
equipment.
HDMI-compatible equipment∗1 with an HDMI or DVI output terminal, such as a DVD player, a set top box or game
equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
For more information about connections (p. 13, 87)
■ Applicable HDMI features
Technical Information
● Input audio signal:
2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)
● Input video signal:
“Input signal that can be displayed” (p. 95)
Match the output setting of the digital equipment.
● Input PC signal:
“Input signal that can be displayed” (p. 95)
Match the output setting of the PC.
● VIERA Link (HDAVI Control 5)
[VIERA Link] (p. 82)
● 3D
● Content Type
● Deep Colour
● x.v.Colour™
● Audio Return Channel∗2
(HDMI2 terminal only)
■ DVI connection
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adaptor cable∗3.
When the DVI to HDMI adaptor cable is used, connect the audio cable to AV2 audio terminals.
Note
● Audio settings can be made on [HDMI1 / 2 Input] in the Sound Menu. (p. 41)
● If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
● These HDMI connectors are “type A”.
● These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection.
● Equipment having no digital output terminal may be connected to the input terminal of component or video to receive
analogue signals.
● This TV incorporates HDMI™ technology.
∗1: The HDMI logo is displayed on HDMI-compliant equipment.
∗2: Audio Return Channel (ARC) is a function to send digital sound signals via an HDMI cable.
∗3: Enquire at your local digital equipment retailer shop.
94
USB connection
● When using USB cables, use the supplied Ferrite core (Middle size) for each cable to comply with the EMC standard.
(p. 88)
As for installing the Ferrite core, refer to the installing of the Ferrite core for headphones.
● It is recommended to connect the USB Flash Memory or Communication Camera to the TV’s USB ports directly.
● Some USB devices or USB HUB may not be used with this TV.
● You cannot connect any devices by using USB card reader.
● You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory.
● Additional information for USB devices may be on the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
■ USB Keyboard
● The USB Keyboard requiring its driver is not supported.
● To change the language type [USB Keyboard Layout] (p. 45)
● Characters may not be displayed correctly on the TV screen depending on the connected keyboard or the keyboard
layout setting.
● Some of the keys of USB keyboards may correspond to the operation of the remote control.
USB Keyboard
↑/↓/←/→
Enter
Backspace
Esc
0 - 9 / Character
F1
Remote Control
Cursor buttons
OK
BACK/RETURN
EXIT
Numeric buttons
GUIDE
USB Keyboard
F2
F3
F4
F5 / F6
F7 / F8
F9 / F10 / F11 / F12
Remote Control
VIERA TOOLS
MENU
INPUT (AV)
Channel Down / Up
Volume Down / Up
Coloured buttons
■ Gamepad
● Check the gamepads that have been tested for the performance with this TV at the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
● Some of the keys of gamepads correspond to the operation of the remote control.
Example:
Remote Control
Remote Control
1
2
Select
11 10 9
Start
3
4
5
8 7 6
1
2
3
4
5
6
Volume Up / Down
Channel Up / Down
GUIDE
OK
BACK/RETURN
INTERNET
7
8
VIERA TOOLS
EXIT
9
INPUT (AV)
10
11
MENU
Cursor buttons
Input signal that can be displayed
■ COMPONENT (Y, PB, PR) (from AV2 terminal), HDMI
COMPONENT
HDMI
: Applicable input signal
■ PC (from HDMI terminal)
Signal name
640 × 480 @60 Hz
1,280 × 720 @60 Hz
1,920 × 1,080 @60 Hz
Horizontal frequency (kHz)
Vertical frequency (Hz)
31.47
45.00
67.50
60.00
60.00
60.00
Technical Information
Signal name
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
Applicable input signal for PC is basically compatible to HDMI standard timing.
Note
● Signals other than above may not be displayed properly.
● The above signals are reformatted for optimal viewing on your display.
● PC signal is magnified or compressed for display, so that it may not show fine detail with sufficient clarity.
95
Characters table for numeric buttons
You can enter characters by using numeric buttons for free input items.
Press the numeric button repeatedly until you reach the
User input
desired character.
Name
A B C D E F G H
I
J
K
L M N O P Q R S T
U V W X Y Z
0
1
2
3
4
5
6
7
8
9
!
:
#
a
b
c
d
e
f
g
h
i
j
k
l
m n
o
p
q
r
s
t
u
v
w
x
y
z
(
)
+
-
.
*
_
● The character is set automatically if you leave for 1 second.
● You can also set the character by pressing the OK button or
other numeric buttons within 1 second.
● The characters may vary depending on the input items.
Characters table:
Numeric
buttons
Numeric
buttons
Characters
Characters
.@ /1!:#+-*_()“‘%&?,;=$[]~<>{}|`^\
mno6MNO
abc2ABC
pqrs7PQRS
def3DEF
tuv8TUV
ghi4GHI
wxyz9WXYZ
jkl5JKL
Space 0
SCART and HDMI terminal information
AV1 SCART terminal (RGB, VIDEO, Q-Link)
Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
18
16
14
12
10
8
6
4
2
+5V Power
SDA
Utility
TMDS Clock−
TMDS Clock+
TMDS Data0 Shield
TMDS Data1−
TMDS Data1+
TMDS Data2 Shield
HDMI terminal
Technical Information
96
Hot Plug Detect
DDC/CEC Ground
SCL
CEC
TMDS Clock Shield
TMDS Data0−
TMDS Data0+
TMDS Data1 Shield
TMDS Data2−
TMDS Data2+
19
17
15
13
11
9
7
5
3
1
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
Block noise, frozen or disappearing image occurs in DVB mode / White spots or shadow image (ghosting)
occurs in Analogue mode / Some channels cannot be tuned
● Check the position, direction and connection of the aerial.
● Check [Signal Condition] (p. 51). If [Signal Quality] is displayed in red, the DVB signal is weak.
● Weather conditions will affect signal reception (heavy rain, snow, etc.), in particular in poor reception areas. Even
during good weather, the high pressure can cause poor reception of some channels.
● Due to the digital reception technologies involved, quality of the digital signals may be relatively low in some
cases, despite good reception of analogue channels.
● Turn the TV off with the Mains power On / Off switch, and then on again.
● If problem persists, consult your local dealer or service provider for the availability of services.
No programmes shown on TV Guide
● Check the digital transmitter.
● Adjust the direction of the aerial to another transmitter installed nearby.
● Check the analogue broadcast. If the image quality is poor, check the aerial and consult your local dealer.
Neither image nor sound is produced
● Check the TV is turned on.
● Check the mains lead is plugged into the TV and the socket outlet.
● Check the TV is in AV mode.
● Check the correct input mode is selected.
● Check the Picture Menu (p. 38, 39) and volume.
● Check all required cables and connections are firmly in place.
Auto aspect
● Auto aspect is designed to provide you with the best ratio to fill the screen.
● Press the ASPECT button if you want to change the aspect ratio manually.
(p. 90)
(p. 23)
Black and white picture
● Check that the output of the external equipment matches the input of the TV.
When connecting with SCART, ensure the output setting of the external equipment is not S-Video.
Q-Link function does not work
● Confirm SCART cable and connection.
Also set [AV1 out] in the Setup Menu. (p. 42)
[VIERA Link] function does not work and an error message appears
● Confirm the connection. (p. 79, 80)
● Turn the connected equipment on and then switch the TV on. (p. 82)
Recording does not start immediately
● Check the settings of the recorder. For details, read the manual of the recorder.
FAQs
The screen becomes dim
● This occurs when the contrast is lowered automatically to avoid image retention in the following conditions without
any user operation for a few minutes:
• No signal in DVB or AV mode
• Selected locked channel
• Selected invalid channel
• Selected radio channel
• Displayed menu
• Thumbnail or still picture
97
Problem
Screen
Sound
Chaotic image, noisy
● Set [P-NR] in the Picture Menu to remove noise. (p. 38)
● Check nearby electrical products (car, motorcycle, fluorescent lamp).
No image can be
displayed
● Is [Contrast], [Brightness] or [Colour] in the Picture Menu set to the minimum?
(p. 38)
● Check the setting of [AV2] ([COMPONENT] / [VIDEO]) in [Input Selection] to
match the output of the external equipment. (p. 29)
Blurry or distorted image
(no sound or low volume)
● Reset channels.
Unusual image is
displayed
● Turn the TV off with Mains power On / Off switch, then turn it on again.
● If the problem persists, initialise all settings.
[Shipping Condition] (p. 58)
No sound is produced
● Is “Sound mute” active? (p. 10)
● Is the volume set to the minimum?
Sound level is low or
sound is distorted
● Sound signal reception may be deteriorated.
● Set [MPX] (p. 40) in the Sound Menu to [Mono]. (Analogue)
Unusual sound from the
TV
● When power is on, drive noise may be heard from inside the TV (not a sign of
faulty operation).
Cannot view 3D images
● Has the 3D Eyewear been switched on, set to 3D mode and registered with
this TV? For details, read the manual of the 3D Eyewear.
● Check the remaining battery level of the 3D Eyewear. (Battery status is
displayed on the screen when the 3D Eyewear is turned on.)
● Does the 3D Eyewear support Bluetooth wireless technology? (p. 32)
● Ensure that [3D Mode Selection] is set to [3D]. (p. 33)
● Some 3D image signals may not be automatically recognised as 3D images.
Set [3D Mode Selection (Manual)] to match the picture format. (p. 34)
● Use the 3D Eyewear within approximately 3.2 m from the TV.
● Check that there are no obstacles between the TV and the 3D Eyewear.
● For some people, the 3D images may be difficult to see, or cannot be seen,
especially in users who have a different level of eyesight between the left and
right eyes. Take the necessary steps (wearing glasses etc.) to correct your
eyesight before use.
3D Eyewear is turned off
automatically
● Check that there are no obstacles between the TV and the 3D Eyewear.
There is something wrong
with the 3D images
● Check the setting of [Picture Sequence] or [Edge Smoother].
The indicator lamp does
not light when pressing
the power button on the
3D Eyewear
● The battery may be running low or flat. Recharge it.
Sound is unusual
● Set the sound setting of the connected equipment to “2ch L.PCM”.
● Check the [HDMI1 / 2 Input] setting in the Sound Menu. (p. 41)
● If digital sound connection has a problem, select analogue sound connection.
(p. 94)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
● Check the HDMI cable is connected properly.
(p. 87)
● Turn the TV and equipment off, then turn them on again.
● Check an input signal from the equipment.
(p. 95)
● Use equipment compliant with EIA/CEA-861/861D.
3D
FAQs
HDMI
98
Causes / Actions
(p. 46, 47)
(p. 35)
Problem
Causes / Actions
Cannot select the file
during DLNA operations
● Is media server of the connected equipment prepared?
● Check applicable data format. (p. 91, 92)
Cannot operate
VIERA Connect
● Check the connections and settings. (p. 70 - 74)
● The server or connected line may be busy now.
The TV does not switch on
● Check the mains lead is plugged into the TV and the socket outlet.
The TV goes into Standby
mode
● Auto power standby function is activated. (p. 11)
● The TV enters Standby mode about 30 minutes after analogue broadcasting
ends.
The remote control does
not work or is intermittent
● Are the batteries installed correctly?
(p. 7)
● Has the TV been switched on?
● The batteries may be running low. Replace them.
● Point the remote control directly at the front of the TV (within about 7 m and a
30 degree angle of the front of the TV).
● Situate the TV away from sunshine or other sources of bright light not to shine
on the TV’s remote control signal receiver.
Parts of the TV become
hot
● Even when the temperature of parts of the front, top and rear panels has risen,
these temperature rises do not cause any problems in terms of performance or
quality.
Permanently lit spots on
screen
● Due to production process involved in this technology this may result in some
pixels which are permanently lit or unlit. This is not a malfunction.
Overcurrent error
message appears
● The connected USB device might cause this error. Remove the device and turn
the TV off with Mains power On / Off switch, then turn it on again.
● Check foreign objects are not inside the USB port.
An error message appears
● Follow the message’s instructions.
● If the problem persists, contact your local Panasonic dealer or the authorised
service centre.
Network
Cannot connect to the
network
● Check the LAN cable or Wireless Adaptor is connected properly. (p. 70)
● Check the connections and settings. (p. 70 - 74)
● Check the network equipment and network environment.
● The router may not be set to issue IP address automatically. If the network
administrator prefers to allocate an IP address, set an IP address manually.
(p. 72)
● The router may be using MAC address filtering (security setting).
Confirm the MAC Address of this TV (p. 42) and set the router to use it.
● If the problem persists, consult your Internet Service Provider or
telecommunications company.
(p. 69)
Other
FAQs
99
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel,
cabinet, or pedestal by using a soft cloth to clean the
dirt or fingerprints.
For stubborn dirt:
First clean the dust on the surface. Dampen a soft cloth with
clean water or diluted neutral detergent (1 part detergent to 100
parts water). Wring the cloth and wipe the surface. Finally, wipe
away all the moisture.
Caution
● Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.
● Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.
● Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
● The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the
surface with your fingernail or other hard objects.
● Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
Licence
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
Maintenance | Licence
● DVB and the DVB logos are trademarks of the DVB Project.
● “RealD 3D” is a trademark of RealD.
● “Full HD 3D Glasses™” logo and “Full HD 3D Glasses™” word are trademark of Full HD 3D Glasses Initiative.
● The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective
owners.
● SDXC Logo is a trademark of SD-3C, LLC.
● “AVCHD”, “AVCHD 3D” and “AVCHD Progressive” are trademarks of Panasonic Corporation and Sony Corporation.
● DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi Corporation or its subsidiaries
and are used under license.
● QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license
therefrom.
● VIERA Connect is a trademark of Panasonic Corporation.
● Skype is a trade mark of Skype Limited.
● DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital
Living Network Alliance.
● Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
● HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
● x.v.Colour™ is a trademark.
● HDAVI Control™ is a trademark of Panasonic Corporation.
● Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
● Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide
patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
● GUIDE Plus+, Rovi and Rovi Guide are trademarks of Rovi Corporation and/or its subsidiaries.
The GUIDE Plus+ and the Rovi Guide system are manufactured under license from Rovi Corporation and/or its
subsidiaries.
The Rovi Guide system is protected by patents and patent applications filed in the US, Europe, and
other countries including one or more of the United States patents 6,396,546; 5,940,073; 6,239,794
issued to Rovi Corporation and/or its subsidiaries.
100
This product incorporates the following software or technology:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software based in part on the work of the Independent JPEG Group,
(4) the software developed by the FreeType Project,
(5) the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or,
(6) open sourced software other than the software licensed under the LGPL.
(7) “PlayReady”(digital right management technology) licensed by Microsoft Corporation or its affiliates.
For the software categorized as (5), please refer to the terms and conditions of LGPL, as the case may be at
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, the software categorized as (5) are copyrighted by several individuals.
Please refer to the copyright notice of those individuals at http://www.am-linux.jp/dl/EUIDTV12/
The LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third party who contact us at the contact
information provided below, for a charge no more than our cost of physically performing source code distribution, a
complete machine-readable copy of the corresponding source code covered under LGPL.
Contact Information
[email protected]
Source code covered under LGPL is also freely available to you and any other member of the public via our website
below.
http://www.am-linux.jp/dl/EUIDTV12/
For the software categorized as (5) and (6), please refer to the applicable license terms included in the “Setup” menu
on product.
Further, for PlayReady categorized as (7), please be aware of the following.
(a) This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this
technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
(b) Content owners use Microsoft PlayReady™ content access technology to protect their intellectual property,
including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or
WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may
require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect
unprotected content or content protected by other content access technologies.
Content owners may require you to upgrade PlayReady to access their content.
If you decline an upgrade, you will not be able to access content that requires the upgrade.
Licence
101
Specifications
■ Product fiche
Manufacturer
Panasonic Corporation
Model No.
TX-P42XT50E
TX-P50XT50E
Energy efficiency class
B
B
Visible screen size
(diagonal)
107 cm / 42 inches
127 cm / 50 inches
On mode average power
consumption
101 W
139 W
Annual energy
consumption ∗1
140 kWh
193 kWh
215 W
Rated power consumption
165 W
Standby power
consumption ∗2
0.40 W
Off mode power
consumption
0.30 W
Display resolution
1,024 (W) × 768 (H)
■ Other information
Model No.
TX-P50XT50E
Power source
AC 220-240 V, 50 / 60 Hz
Panel
Plasma panel
Dimensions (W × H × D)
1,009 mm × 663 mm × 320 mm
(With Pedestal)
1,009 mm × 616 mm × 84 mm (TV only)
1,186 mm × 764 mm × 335 mm
(With Pedestal)
1,186 mm × 717 mm × 84 mm (TV only)
Mass
20.0
17.0
25.5
22.0
Net (With Pedestal)
Net (TV only)
Sound
(160 mm × 40 mm) × 2,
Audio output
20 W (10 W + 10 W)
Headphones
M3 (3.5 mm) stereo mini Jack × 1
Specifications
Check the latest information
on the available services at
the following website.
(English only)
http://panasonic.jp/support/
global/cs/tv/
Aerial input
Net (With Pedestal)
Net (TV only)
8Ω
Speaker
Receiving systems /
Band name
102
TX-P42XT50E
PAL B, G, H, I,
SECAM B, G,
SECAM L, L’
VHF E2 - E12
VHF A - H (ITALY)
CATV (S01 - S05)
CATV S11 - S20 (U1 - U10)
VHF H1 - H2 (ITALY)
UHF E21 - E69
CATV S1 - S10 (M1 - M10)
CATV S21 - S41 (Hyperband)
PAL D, K,
SECAM D, K
VHF R1 - R2
VHF R6 - R12
VHF R3 - R5
UHF E21 - E69
PAL 525/60
Playback of NTSC tape from some PAL Video recorders (VCR)
M.NTSC
Playback from M.NTSC Video recorders (VCR)
NTSC
(AV input only)
Playback from NTSC Video recorders (VCR)
DVB-T
Digital terrestrial services (MPEG2 and MPEG4-AVC(H.264))
DVB-C
Digital cable services (MPEG2 and MPEG4-AVC(H.264))
VHF / UHF
Operating conditions
Temperature: 0 °C - 35 °C
Humidity: 20 % - 80 % RH (non-condensing)
Connection terminals
AV1 input / output
SCART (Audio/Video in, Audio/Video out, RGB in, Q-Link)
AV2 input
(COMPONENT /
VIDEO)
VIDEO
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
AUDIO L - R
RCA PIN Type × 2
0.5 V[rms]
Y
PB, PR
1.0 V[p-p] (including synchronisation)
±0.35 V[p-p]
Bluetooth wireless
technology∗3
HDMI 1 / 2 input
TYPE A Connectors
HDMI1: 3D, Content Type, Deep Colour, x.v.Colour™
HDMI2: 3D, Content Type, Audio Return Channel, Deep Colour, x.v.Colour™
● This TV supports “HDAVI Control 5” function.
Card slot
SD Card slot × 1
Common Interface slot (complies with CI Plus) × 1
ETHERNET
RJ45, IEEE802.3 10BASE-T / 100BASE-TX
USB 1 / 2
USB2.0 DC 5 V, Max. 500 mA
DIGITAL AUDIO
OUT
PCM / Dolby Digital / DTS, Fibre optic
Standard
Compliance
Bluetooth 3.0
Frequency Range
2.402 GHz - 2.480 GHz
∗1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per
day for 365 days. The actual energy consumption will depend on how the television is used.
∗2: when the TV is turned off with the remote control and no function is active
∗3: Not all the Bluetooth compatible devices are available with this TV.
Note
● Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
● This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024
Specifications
103
Information for Users on Collection and Disposal of Old Equipment and used
Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC
and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and
prevent any potential negative effects on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of
your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
M0212-0
Web Site: http://panasonic.net
© Panasonic Corporation 2012
Printed in Czech Republic