Panasonic SCHTB770EG Quick Start Guide

SC-HTB770EGEBGN_RQCA2151_mst.fm
5 ページ
２０１３年２月２１日　木曜日　午後３時３０分
Quick Start Guide
Home Theater Audio System SC-HTB770
Step 1: Choose the configuration that is right for you
Place the speakers horizontally
Place the front speakers vertically
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
≥ Tighten screws securely.
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
≥ Tighten screws securely.
Green
Speaker placement
Speaker with,
Red connector:
To the right
White connector:
To the left
Green connector:
In the centre
Push
Push
1 Fully insert the
wire.
r: White
s: Blue line
2 Press the cable
into the groove.
Press into the
groove.
Fully insert the wire.
r: White
s: Blue line


Push
Green
White
Red

Red or White
RQCA2151
F0213TA0

SC-HTB770EGEBGN_RQCA2151_mst.fm
6 ページ
２０１３年２月２１日　木曜日　午後３時３０分
Step 2: Connect the cables
Using this system
When the TV is VIERA Link “HDAVI ControlTM” or
HDMI CEC compatible
Do not connect the AC mains lead to the main unit and the active subwoofer until all other
connections are completed.
When the TV is HDMI (ARC) compatible
e.g. TV remote control
TV
HDMI IN
(ARC)
HDMI cable
Be sure to connect to the
TV’s ARC compatible
terminal. (Refer to the TV’s
operating instructions.)
TV
(ARC)
AV OUT
6
R
6
CENTER
6
L
DIGITAL
AUDIO
IN
AC IN
TV
(ARC)
SPEAKERS
Turn on the active subwoofer.
AV OUT
Main unit
White
On the TV, select this home theater system as the TV’s speakers from the VIERA
Link menu.
Green
Red
≥ If the TV is not a Panasonic TV, set the “Receiver” or “External speakers” to “On”.
HDMI (ARC)
Audio Return Channel:
Allows a home theater system to receive and play audio from the TV through a HDMI cable without
additional wiring.
Press [i VOL j] on the TV’s remote control to adjust the volume.
≥ Operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
When the TV is non HDMI (ARC) compatible
When the TV is not VIERA Link “HDAVI ControlTM” or
HDMI CEC compatible
HDMI IN
e.g. TV remote control
TV
HDMI cable
OPTICAL
OUT
INPUT
SELECTOR
DIGITAL
AUDIO
IN
TV
(ARC)
TV
(OPT1)
Optical digital
audio cable
AV OUT
Turn on the main unit, active subwoofer and the TV.
6
R
6
CENTER
6
L
DIGITAL
AUDIO
IN
AC IN
Press [INPUT SELECTOR] to select the TV sound.
TV
(ARC)
SPEAKERS
TV
(OPT1)
AV OUT
Main unit
White
Green
Red
HDMI cable is required for VIERA Link “HDAVI Control”.
Press [i VOL j] to adjust the volume.
≥ If there is sound from the TV’s speakers too, then use the TV’s remote control to lower the volume to
minimum.
For wall mounting and other details, be sure to refer to the Operating Instructions.