Panasonic KXT9000BS Operating instructions

 Panasonic
CORDLESS PHONE
wooe no. KX- T9000BS
EASA-PHONE
Operating Instructions
Charge the battery for about 15 hours before initial use.
Please read before use.
Introduction
Thank you for purchasing the Panasonic Cordlessphone.
The KX-T9000BS features include:
Panasonic Pocket-Size Portability
fits easily into your shirt pocket; unfolds to reach your ear and mouth.
Intercom with 2-Way paging - |
lets you page between the base unit and the portable unit. Aiso allows you to
converse between the portable unit and adjoining telephone before
transferring an imcoming call
Automatic Dialing
for up to 10 telephone numbers.
Save Redial
lets you temporarily store a busy number into the memory for future dialing.
Memo Dial
lets you enter a telephone number into memory even during a telephone
conversation.
Tone Switching
lets you temporarily switch to tone mode from pulse mode.
Digital Security Codes
help avoid unauthorized use of your cordless phone by another user on the
same frequency.
Two Rechargeable Batteies
lets you use one in the portable unit while charging the other in the base
unit. Replacement is easy.
Contents
_ Location of controls .....................e...eceeececccccacecontacenennaaceneene 5
Connection .................e.....eeeneseseorsneanrecenaoenecacacaneaeneaceenanannce. 9
Charging the portable unit and the spare battery .................. 11
Making call ........................cseccsececanacoonacananena ana raa aan aneaeeenen es 13
Answering calls ..........................s.es0e0ae0anaananaean area eenaacenncnas 15
Last number redialing.............................00uneconencanene acne 16
Save redial ........................e=eesrecercenorreceoeecennenn nana oaocccecccceece 17
Automatic dialing ...................ee—..-..cernesssnancorecenenenercccenee res 19
Storing telephone numbers for automatic dialing ...........-......-...e.e. 19
Erasing a stored number.......................-...e.eneceemeren rre 21
MEMOJdial ................e.ececccccccacaner ene enocorcercacecaceca eo reeercena rea ne nana 21
Dialing .......................seseareracacenecacacanearenaanen ea aren ena oce renace 22
. 2-way paging............. enooonnnonaooocaconoeaaneanaaccon aneranaonecarenereonecenes 23
Transferring an incoming call ….…..…...….........…...…rcssecensrsenense 24
Direct call ( child call ) .........................ee-.ese0e.ee0eeneanenene e 26
Outgoing call prohibition.........................eeesssssseseeenere ee 28
Canceling to the Direct call / Outgoing call prohibition.......... 29
Other features ..........................eecencerecoreccarareaerecanareocacecaecaceee. 29
Prolongation of a call duration ............................... 2... R ER A RER RER ER RR EEREEG 30
| | DUtton....................eemcr cerco ener ere eene acen ceeteneercenes 30
Erasing all stored numbers ..........................e.0e0ucccccccccecorenacencereenencaceea 31
| A | button ............. e. ...eeernsice concen een anne ne ceca cenar ereecae enanos 31
Programing of bell sound level ( Portable unit ) ............................—....... 32
Turning on/off the button click tone os 33
Temporary tone dialing .…….….…….…...……….…..…..…..….….….………resrsrerrersensencrsnncrance 34
Installing the pocket clip .…..….…....…....…...…..…….urcceriessercecsssencnes 35
ВаПегу гер!асетет!..............еонеаенноненнееенненннннененееннененнненнене 34
Troubleshooting guide.............co rier, 35
Explanation of the DIP-SW for servicemen........................... 36
-2-
Precaution
Before using this unit, please read these
operating instructions carefully. Take
2)
special, care to follow the safety suggestions
listed below.
Safety
1) Power Source:
3)
The unit should be connected to a power 4)
supply only of the type described in the
operating instructions or as marked on
the unit.
installations
Environment
1) Water and Moisture:
Do not use this unit near water-for
Magnetism:
The unit should be situated away from
equipment or devices that generate a
strong magnetic field.
Stacking:
Do not place heavy objects on top of this
unit.
Surface:
Place the unit on a flat, level surface, or
use the wall mounting adaptor for wall
installation.
For best performance
1) The base unit should be used with the
2)
example, near a bath tub, washbowl, or
the like. Damp basements should also
be avoided.
Heat:
The unit should be situated away from
2)
heat sources such as radiators and the
like. It also should not be placed in
3)
4)
rooms where the temperature is less than
5°C or greater than 40°C.
Placement
1) Foreign Material:
5)
Care should be taken so that objects do
not fall into and liquids are not spilled into
the unit. Do not subject this unit to
excessive smoke, dust, mechanical
vibration, or shock.
antenna vertically.
if noise prevents the conversation from
being understood at the portable unit,
approach the base unit to lessen the
noise.
The portable unit should be fully
recharged on the base unit when the
MULTI indicator (LP ) flashes.
The small-sized antenna of the portable
unit should not be touched during the use
because of its high sensitivity.
The possible calling distance may be
shortened when the unit is used is the
tollowing places.
Near obstacles such as hills, tunnels,
undergrounds, near metal object such as
wire fence, etc.
Accessories
* Telephone line * AC Adaptor « Battery * Pocket Clip
cord .........one | ONE | nn two | ee one
Location of controls
Portable unit
ATAN ERA OR OREA NA
1 Belt Holder:
Used to hang the portable unit
on your pocket.
2 MUTE Button:
Used when you do not want your
voice to be heard by the other
party. |
The voice of the other party will
still be heard.
3 TALK Indicator: ( %* )
4 OPEN Button:
Used to open the portable
unit. (TALK mode)
5 Button:
Used to cancel a call.
6 Button:
Used to page the base unit.
7 RINGER:
When the phone receives a call,
the RINGER will ring.
8 Flexible Antenna
9 Ear piece
10 POWER Switch:
Used to turn the unit on and off.
11 Direct Call Indicator / Outgoing
call prohibition Indicator( Æ )
12 MULTI Indicator (> /-© )
13 Dial Buttons
14 —>e |Button:
Used to Automatic dialing
15 [ ae | Button:
Used to redial the last dialed number.
16 _R Button:
Used to recall.
17 | © Button:
Used to go into program mode.
18 Memory Card:
Used to write your stored number.
( 10 stations )
19 Microphone
Location of controls (cont.)
Base uni
© © ©
1 RINGER Volume Control:
Used to set the ringer volume.
2 Battery Charge Contacts
3 Drawer Release Button (for the spare battery )
4 Antenna
5 Speaker ( RINGER)
6 BATT. Charge Indicator (for the portable unit) ( (— )
7 BATT. Charge Indicator ( for the spare battery) ( [RF )
8 IN USE Indicator( a )
9 POWER Indicator ( —CF )
10 PAGE Button :
Used to page the portable unit.
11 Drawer (inside the spare battery )
12 MIC ( Microphone for Intercom )
13 Number Card :
Used to write your telephone number.
Connection
Fasten the cord to the cord holder.
e
PA
wore |
TRL
2 ds
ès Tn
E Fo
a
MENE |
Cord Holder
AC adaptor plug
Note:
If a power failure takes place, the unit will not
function.
We recommend that you connect a reserve
telephone(another telephone)
on the same line to this unit in the event of a
power failure.
Telephone Line Cord
a Fay зе
BH adr aa.
=> | To Telephone Line
dy To Power Outlet
USE ONLY Panasonic AC
| | ADAPTOR KX-A11BS
- 10 -
Charging the portable unit and the
spare battery
Charging the portable unit
Charge the battery of the portable unit for about 15 hours before initial use, or if
the MULT! indicator (C= Ve Jon the portable unit flashes.
Place the portable unit on the cradie.
The portable unit is always charged while on the cradle.
BATT. Charge indicator
( for the portable unit )
BATT. Charge indicator
( for the spare battery )
You can use the unit before 15 hours are up.
But be sure to put the portable unit on the cradle after use so that it can
continue to be charged.
Note:
« Even when the MULT! indicator (C= / \flashes, the portable unit will still
function fora short time.
« Clean the battery charge contacts with a soft cloth about once a month,
otherwise the portable unit may not be charged properly.
- 11 -
Charging the spare battery
To save time for charging the battery of the portable unit, the unit has a spare
battery in the base unit.
The spare battery is always being charged in the base unit and the BATT
charge indicator light ( ) shows that charging is being done.
Pull out the drawer by pressing the release
| button.
Insert the spare battery into the drawer in the
correct direction.
a— BATT. charge indicator( E> ) will light when
| you close the drawer.
- 12 -
Making calls
OPEN button
= POWER switch
OE
Dial button
- 13 -
Be sure tratr the POWER switch on the portable unit is set to the “ON” position.
| Open the portable unit by pressing the OPEN
button.
The TALK indicator light ( $? )onthe
portable unit changes from flash to a steady
light. |
#| IN USE indicator light ( “a SN) on the base unit
L1JL2)(3) | Dial the telephone number. |
. Tr С 5 ЭГ 6 J. À If you misdial, press [ ++ Jbution, and then
IT, { dial the correct again.
When your conversation is over, close the
portable unit.
The TALK indicator light ( a ) on the
* portable unit and the IN USE indicator ( rw )
‘on the base unit goes out.
- 14 -
Answering calls
Be sure the POWER Switch of the portable unit is set to the “ ON “ position.
When the telephone rings, open the portable unit
and answer the call.
| )|| The TALK indicator light ( %* ) on the portable
| unit is on.
When you conversation is over,
close the portable unit.
+ >| The TALK indicator light ( 94 ) goes out.
|
|
Л
À 2
a
“E
- 15 -
Last number redialing
The unit can redial the last dialed number using | ое | button.
Open the portable unit by pressing the OPEN
button.
Press button enables you to redial
Note:
Up to 30 digits will be dialed. [f the dialed number is more than 30 digits, the
leading 30 digits will be sent out.
Last number redialing memory is renewed automatically every time you dial a
new number.
- 16 -
С
J
Save redial -
If you want to save the telephone number for later use, you can use save
dialing memory.
| Open the portable unit by pressing the OPEN
Fl button.
2 TT Dial telephone number.
(L1})U2}L3)
(4) 5)[6)
Lz Js jlo]
(X) Co) (#]
3 Press button.
LX JO LH] | The MULTI indicator light ( — 7-6 is on.
==) Сет)
(LP) JR]
Press button.
„4 CX)Co)(x) | [o |
==) | The MULTI indicator light( — /) ) goes out.
CPI CA
-17-
Gi | Open the portable unit by pressing the OPEN
E | button.
fi Press” E) |button.
The MULTI indicator light ( = / E) is on.
Press| æ | button.
"1 The MULTI indicator light ( > /-© ) goes
out.
Note:
Up to 30 digits are stored into save dialing memory.
This save dialing number is not erased till new number will be entered into this
memory.
- 18 -
ao PAE A Er
Automatic dialing
Store telephone numbers for automatic dialing
Each dialing button ( 0 through 9 ) serves as a memory station for automatic
dialing. Each station is capable of storing 20 digits number.
Make sure that the POWER switch is set to the “ ON “ position.
| | Open the portable unit by pressing the OPEN
| button.
“Press [+ | button.
| The MULTI indicator light ( —> / €» ) is on.
Press button.
Fa 516) the dialing button.
4 (1)C2)(3) | Press the station number ( 0 through 9 ) using
Г7 )[ 8 )[ 9} The MULT! indicator light ( 7/2 ) goes out.
- 19 -
Storing telephone numbers for automatic dialing
( cont.) |
(1) 2)(3)) Dial the telephone number up to 20 digits.
| (4 ){ 5 ) (6 aj The MULTI indicato — / L)) is flashing
E Ea 8 Mo 1 everytime you press the button.
Sao Em | * Repeat from step 2 to 5, to store other
— = 1 telephone numbers.
' Press button to end the proglamming
6 | mode.
Enter the same number into the same station.
= a When you press button, the
—. | confirmation tone sounds.
* Twice:
The entry is the same as what was previously
“stored.
* Once:
The entry is different from the one that was
previously stored.
- 20 -
Erasing a stored number
1 Press button.
The MULT! indicator light ( C= /-€) ) is on.
2 Press button.
3 Press the station number that you want to erase.
The MULTI indicator light ( > / <> ) goes out
4 Press button.
5 Press| £ | button to end the programming mode.
Note:
* If you do not press a dialing button within 30 seconds while programming,
programming mode is then canceled. Reprogramming is necessary.
MEMO dial
While having a conversation, you can store the telephone number that you
have just dialed into memory stations.
Memory:
1 Press) E |button.
2 Press [—>. jputton.
3 Press the station number( Dial button ) 0 through 9 .
4 Press | ae ¡putton. |
5 Press! © | button.
Dialing: See page ( Repeat the same way as automatic dial.)
Note:
If you select the station number which is used on Automatic dialing, the
previously stored number is cleared and the telephone number you have just
dialed is stored.
- 21 -
Dialing
Before using the automatic dialing feature, you must program the telephone
numbers into memory stations.
Open the portable unit by pressing the OPEN
button.
en
|| The TALK indicator( @° ) changes from
- | flash to a steady light. a
(1 )(2)(3) | thetelephone number that you want to dial is
Em 5) 6 ) stored.
3 Press the station number ( 0 through 9 ) where
[7)(8)[9)| The stored number is automatically dialed.
= | When your conversation is over, close the
portable unit.
- 22 -
2-Way Paging
You may page between the base unit and the portable unit.
To call the portable unit from the base unit
Bl Press the PAGE button on the base unit to page
у A the portable unit user.
y ; The beep sounds at the portable unit.
To call the base unit from the portable unit
_ 7 | Press | Pl button on the portable unit to
89 | page the base unit user.
288 | тне beep sounds at the base unit.
- 23 -
Transferring an incoming call
The base unit user is able to receive a call using another telephone connected
on the same line to the base unit and transfer it to the portable unit user.
This is done by connecting another telephone on the same line to the base
unit.
Transferring from the portable unit to another
telephone on the same line to the base unit
When the telephone rings of open the portable unit and answer the call.
The portable unit user:
1 The TALK indicator light(¥g® a’ ison.
Press| P | button on the portable unit to page
the base unit user.
The beep sounds at the portable unit and the
=| TALK indicator light( a? ) flashes.
=] If the base unit user does not answer the paging,
FLEE press) p | button to the outside caller.
The base unit user:
UA When the beep sounds, press the PAGE button
<< to answer the paging, then speak to the paging
party. Intercom mode can be maintained for 60
seconds.
Pick up the handset of another telephone on the
same line to the base unit to answer the incoming
call. Then, the local busy tone sounds at the
e portable unit.
Close the portable unit to hang up, after confirming that the local busy
tone sounds.
If the portable unit close before the local busy tone sounds, the call
hangs up.
5 The portable unit user:
- 24 -
Transferring from the another telephone on the
same line to the base unit to the portable unit
1
“| The base unit user:
When telephone rings,
- |. pick up the handset of another telephone on the
|| same line to the base unit.
Press the PAGE button on the base unit to page
Ш the portable unit user.
NE | The beep sound and the IN USE indicator light
( % ) flashes.
ENT) The portable unit user:
Open the portable unit to answer the paging and
1:1 speak to the paging party.
| The TALK indicator light ( % ) flashes.
Intercom mode can be maintained for 60
seconds.
The base unit user:
Place the handset of another telephone on the
‚same line to the base unit on the cradle.
The portable unit user:
When the TALK indicator light ( 7. ) is on, you
can answer to the incoming call.
- 25 -
Direct call ( child call )
This feature works calling a certain place with pressing a button.
When you press one of the buttons ( 0 through 9, #or ).
the telephone number which is stored in advance is dialed.
Setting to the Direct call
ET]: Open the portable unit by pressing the OPEN
Ш | El | button.
The TALK indicator ( “A” ) changes from flash
to a steady light.
| Press button.
The MULTI indicator light (> / <> ) is on.
=} Press | Р | button.
The MULTI indicator light ( ) goes
out. =/€
Dial the telephone number that you want to save.
+1 (Up to 30 digits )
| The MULTI indicator(-—» /)) is flashing
TA everytime you press the button.
Press button.
Direct call indicator light( A ) is on.
. y Tl
Do . . de ,
: uu PELO
. a, iT .. oo} :
L ed Me =: a Y,
a : — - hu”
3 Ps - fas = * ER ES E:
a pi 12 |
da 5 ‚
мы peed .. ps CEE 3
Ч "HF AR E
= Ir Hy PY A
"y e N 1 HET
i Ч [a + © Ix,
" .. - NE Le E
mia - E
E E -
- 26 -
Dialing:
ET | Open the portable unit by pressing the OPEN
E button.
Fr = ———' Press one of the button
| LM (O through 9 ,4or > ).
- 27 -
Outgoing call prohibition
Setting tothe © outgoing call prohibition
11 | Open the portable unit by pressing the OPEN
5 button.
e | Press button.
The MULTI indicator light( [—> / O ) is on.
Press | Pl button.
The MULTI indicator light( > / €) ) goes out.
Press button.
Press| © | button.
Es The outgoing call prohibition indicator light
E GRE ( de flashes.
« This mode is maintained until you cancel this mode. (See page ).
- 28 -
Canceling to the Direct call /
Outgoing call prohibition
Open the portable unit by pressing the OPEN
button.
Press| © | button.
1 The MULTI indicator light ( 3/4) is on.
Presss P |.| P |button.
The MULTI indicator light( > / €) ) goes out.
Press button.
- 29 -
Other features
Prolongation of a call duration
Duration time of a call can be prolonged for another 15 minutes, during a
conversation, alarm tone sounds.
[ 1 NC 2] ; E 3 E When alarm tone sounds during a conversation,
[4 )Г5 W 6 3 | Press one of the button ( 0 through 9 #or ).
[7)(8)C9) |
LXxJLo) +]
* Duration time of your conversation can be prolonged for another 15 minutes.
* If you fial to do so, you will be automatically cut off.
[oe | button ( behind PBX )
When the unit is connected to your PBX'S
extension, dial the line access number or
button then press button to access an
outside line. _ |
Also when storing, pressing | æ | button
before telephone numbers may be required by
your host PBX.
Example:
If the line access number is "9 ", press "9 " and | æ button. Then dial the
telephone number.
Press onece ( 5 seconds pause ).
Press twice ( 10 seconds pause ).
- 30 -
Erasing all stored numbers
If you use this function, all of the memories( Automatic dialing memory and
Redial memory etc.) are completely erased. |
1 Press! © | button.
The MULTI indicator light ( —> / > ) is on.
Press the dial button [2], [5], [8].[0] .
Press button.
The MULTI indicator light (—> / <>) goes out.
To access an outside line using the PBX
recalifacility, press | R | button.
Depending on type of switching equipment to
which the unit is connected, various functions,
such as transfer, recall and hold can be initiated.
- 31 -
Other features ( cont.)
Programming of bell sound level( portable unit )
You can program the volume of incoming Bell sounds in TALK mode.
1 |r button.
== SH. |The MULTI indicator light(C= /~4) is on.
ress the dial button [1 )through , then Bell
ignal will ring.
ES MED: The MULTI indicator light( > / <> ) flashes.
EEE. | [1]-LOW /
- [4]- HIGH
5. | After selecting the sound level, press
q am *с. button.
« The memorized level is canceled by the method of erasing all stored
numbers.
- 32 -
Other features ( cont. )
Turing ON/ OFF the button click tone
1 Press| > | button.
The MULTI indicator light ( > / €? ) is on.
Press [5] button.
The MULTI indicator light( — / 0 ) goes out.
Press [4] to adjust ON/ OFF.
=a | ON and OFF are changed alternately each time
| you press [+] button.
The MULTI indicator light ( > /-$> ) flashes.
Press [ <> button.
* If click tone is set to OFF, Pressing any button sounds no tone.
- 33 -
Other features
Temporary tone dialing ( cont. )
This mode will aliow you to change the dialing mode from pulse to tone during
a dialing operation, and enter special tones and codes to operate answering
machines, electronic banking services and other special service.
When you close the portable unit to hang up, the dialing mode will be
a w | ‘Open the portable unit by pressing the OPEN
E button.
|
|
h | The TALK indicator light( % ) is on.
) Press | > button.
- 34 -
Installing the pocket clip
You can use the portable uni with hanging on your pocket.
Remove the cover
in the direction of the arrow (A)
insert the pocket clip
2 in the direction of the arrow (8) _
+ Removing the pocket clip
Remove the pocket clip
in the direction of the arrow
using a slotted screwdriver, or the like.
- -35-
Battery replacement
To save time for charging the portable unit, the unit has a spare battery in the
base unit. | |
The spare battery is always being charging in the base unit and the BATT
charge indicator light ( [A ) shows that charging is being done.
~ Ш | Set the POWER switch on the portable unit to
> the “OFF” position.
|: Replace the battery on the portable unit with the
| spare battery on the base unit.
Note:
* When you exchange the battery of the portable unit to the spare battery which
is charged in the drawer, don't leave the portable unit without a battery pack for
a long period (more than 5 minutes), or memories in the portable unit wiil be
cleared.
» Remember to charge the battery for 10 hours.
«If the MULTI indicator(—r/ >) flashes after a few telephone calls even
when the battery has been charged for 10 hours, replace it.
- 36 -
Troubleshooting guide
Problem
Cause & Remedy
The unit does not work.
The battery is in need of charging.
The AC adaptor is not plugged into an
outlet.
The connection of the unit is made
improperly.
You are too far from the base unit.
Move closer to the base unit.
The POWER switch is set to the "ON"
position.
Sound flutter or fades.
You are too far from the base unit.
Move closer to the base unit.
I charged the battery for 10 hours, but
the MULTI indicator flashes after a
few telephone calls.
lt is time to change the battery.
Please replace it with a new one.
The MULTI indicator (> /-©)
flashes.
Charge the battery fully.
While operatint the unit, the AC
adaptor feels warm.
This is normal.
- 37 -
Explanation of the DIP-SW
for servicemen
OFF is the initial setting when the unit is shipped.
OFF ON
Switch | Function OFF ON wm |} |
$3 TONE DETECT| Valid Not valid [Ш |
54 DIAL MODE PULSE TONE [Ш |
55 PAUSE TIME 3 sec 5 sec
S6 — — —
- 38 -
5 & ¢ 8
Matsushita Electric industrial Co., Ltd.
Central P.O. Box 288, Osaka 530-91, Japan
Printed in Japan
">