Electrolux EBGL70WE User Manual

EBGL70
................................................ .............................................
EN STEAM OVEN
USER MANUAL
2
www.electrolux.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CLOCK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
AUTOMATIC PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
USING THE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
WHAT TO DO IF… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
GARANTIE, GARANZIA, GUARANTEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.RegisterElectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
3
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with
the appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they are supervised by an adult or a person who is responsible for their safety.
• Do not let children play with the appliance. Children under 3 years must not be left unsupervised in the vicinity
of the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, we recommend that you activate it.
• Cleaning and user maintenance shall not be made by
children without supervision.
1.2 General Safety
• Only a qualified person must install this appliance and
replace the cable.
• Internally the appliance becomes hot when in operation. Do not touch the heating elements that are in the
appliance. Always use oven gloves to remove or put in
accessories or ovenware.
• Do not use a steam cleaner to clean the appliance.
4
www.electrolux.com
• Before maintenance cut the power supply.
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
• Only use the core temperature sensor recommended
for this appliance.
• To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the side
walls. Install the shelf supports in the opposite sequence.
• If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
• The means for disconnection must be incorporated in
the fixed wiring in accordance with the wiring rules.
• Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
2.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.
• Do not let mains cables to come in
touch with the appliance door, specially
when the door is hot.
ENGLISH
• The shock protection of live and insulated parts must be fastened in such a
way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you disconnect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.
2.2 Use
WARNING!
Risk of injury, burns or electric
shock or explosion.
• Use this appliance in a household environment.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each
use.
• Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open
door.
• Do not use the appliance as a work
surface or as a storage surface.
• Always keep the appliance door closed
when the appliance is in operation.
5
• Open the appliance door carefully. The
use of ingredients with alcohol can
cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
WARNING!
Risk of damage to the appliance.
• To prevent damage or discoloration to
the enamel:
– do not put ovenware or other objects
in the appliance directly on the bottom.
– do not put aluminium foil directly on
the bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in
the appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
• Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of
the warranty law.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be permanent.
Steam Cooking
WARNING!
Risk of burns and damage to the
appliance.
• Do not open the appliance door during
steam cooking. Steam can release.
2.3 Care and Cleaning
WARNING!
Risk of injury, fire or damage to
the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
• Make sure the appliance is cold. There
is the risk that the glass panels can
break.
6
www.electrolux.com
• Replace immediately the door glass
panels when they are damaged. Contact the Service.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Remaining fat or food in the appliance
can cause fire.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of detergent.
2.4 Internal light
household appliances. Do not use it for
house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same specifications.
2.5 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
• The type of light bulb or halogen lamp
used for this appliance, is only for
3. PRODUCT DESCRIPTION
1
2
1 Control panel
3
2 Electronic programmer
4
5
6
5
4
11
7
8
9
3
2
1
10
3.1 Accessories
CAUTION!
Do not use the baking tray or
deep pan with the Full Steam
function.
3 Water drawer
4 Socket for the core temperature sen-
sor
5 Heating element
6 Lamp
7 Fan
8 Rear wall heating element
9 Steam generator with cover
10 Shelf support, removable
11 Shelf positions
ENGLISH
7
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Core temperature sensor
To measure how far the food is cooked.
Glass dish with 2 grill inserts
Sponge
For absorbing residual water from the
steam generator.
4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
4.2 Setting and changing the
time
After the first connection to the mains, all
symbols in the display are on for some
seconds. For the subsequent few seconds the display shows the software version.
After the software version goes off, the
display shows h and 12:00.
8
www.electrolux.com
Setting the time of day:
1.
Touch
or
2.
Touch
.
3.
Touch
or
Changing the time of day
to set hours.
You can change the time of day only if the
appliance is off. Touch
.
flashes in
the display. To set new time of day use
the above procedure.
to set minutes.
4.
Touch
or
.
The Temperature / Time display shows
the new time.
5. CONTROL PANEL
5.1 Electronic programmer
1
2
3
4
5
6
7
8
9
10
Use the sensor fields to operate the appliance.
Sensor Field
Function
Description
-
DISPLAY
Shows the current settings of the appliance.
2
ON / OFF
To activate and deactivate the appliance.
Use it to access the heating functions.
3
OPTIONS
To set an automatic programme,
cleaning function or a heating function.
4
MY FAVOURITE
PROGRAMME
To store your favourite programme.
Use it to access your favourite programme directly or when the appliance
is deactivated.
5
TEMPERATURE /
FAST HEAT UP
To set and show the cavity temperature or the core temperature sensor
temperature. If you press and hold it for
three seconds, it turns the Fast heat up
function ON or OFF.
6
DOWN, UP
To choose a heating function or a clock
function and to set the minute minder,
temperature or time of day.
1
ENGLISH
Sensor Field
Function
Description
7
OK
8
LIGHT
To activate or deactivate the lamp in
the appliance.
9
CLOCK
To set the clock functions.
10
MINUTE MINDER
To set the minute minder.
To confirm the selection or setting.
5.2 Display
A
B
C
A) Heating function symbol
B) Temperature / time of day display
C) Cooking time display / Duration / Mi-
nute Minder
G
F
E
D
D) Residual heat indicator
E) Indicators for the clock functions (refer
to the table "Clock functions" )
F) Heat-up indicator / Fast Heat Up indi-
cator
G) Number of a heating function / pro-
gramme
5.3 Other indicators of display
Symbols
/
Name
Description
Automatic programme
You can choose an automatic programme.
My favourite programme
The favourite programme operates.
g
An automatic programme with weight input
operates.
h / min
A clock function operates.
Temperature / fast
heat up
The function operates.
Temperature
The current temperature is indicated
Core temperature
sensor
The core temperature sensor is in the core
temperature sensor socket.
Oven light
You deactivated the light.
Minute minder
The minute minder function operates.
9
10 www.electrolux.com
5.4 Heat-up indicator
If you activate a heating function, the bars
in the display
come on one by one.
The bars show that the temperature in the
appliance increases or decreases.
When the appliance is at the set temperature, the Heat-up indicator goes off the
display.
6. DAILY USE
WARNING!
Refer to the Safety chapters.
• the manual mode
• automatic programmes
To operate the appliance you can use:
Heating function
Application
1
True Fan
Cooking
To bake on up to 3 oven levels at the same time
and to dry food. Set the oven temperatures 20 40 °C lower than when using Conventional Cooking.
2
Pizza Setting
To bake food on one shelf position for a more intensive browning and a crispy bottom. Set the
temperature 20 - 40 °C lower than for Conventional Cooking.
3
Moist Fan Bak- For energy-saving baking and cooking of mainly
ing
dry bakery items as well as for baking in tins on
one shelf position.
4
Conventional
Cooking
5
Slow Cook
6
Bottom Heat
7
Defrost
8
Keep Warm
9
Grilling
10
Fast Grilling
11
Turbo Grilling
12
To bake and roast food on one shelf position.
To prepare tender, succulent roasts.
To bake cakes with crispy bottom and to preserve
food.
To defrost frozen food.
To keep cooked food warm.
To grill flat food and to toast bread.
To grill flat food in large quantities and to toast
bread.
To roast larger meat joints or poultry with bones
on one shelf position. Also to make gratins and to
brown.
Quarter Steam To bake bread, roast large pieces of meat or to
+ Heat
warm up chilled and frozen meals.
ENGLISH
Heating function
Application
13
Half Steam +
Heat
For dishes with a high moisture content and for
poaching fish, custard royale and terrines.
14
Full Steam
For vegetables, fish, potatoes, rice, pasta or special side dishes.
6.1 Setting the heating function
1.
Touch
. The display shows a symbol, the number of the heating function and the preset temperature.
2.
Touch
function.
3.
Touch
or the appliance starts automatically after five seconds.
or
11
to set a heating
If you activate the appliance with
and do not set a heating function or programme, the appliance
deactivates automatically after 20
seconds.
6.2 Changing the temperature
Touch
or
to change the temperature in steps of 5 °C.
When the appliance is at the set temperature, an acoustic signal sounds three
times. The heat-up indicator goes off the
display.
by one to show that the function operates
appears on the display.
and
Useful information
• The Fast heat up is not available with
every oven function. An acoustic signal
sounds if the Fast heat up is not available for the set function if Faulty tone is
activated in the “Settings menu”.
6.5 Steam cooking
The water drawer cover is in the control
panel.
1. Press the cover to open the water
drawer.
2. Fill the water drawer with 700 ml of
water.
The water supply is sufficient for approximately 50 minutes.
6.3 Checking the temperature
You can see the temperature in the appliance when the function or programme
operates.
1.
Touch .
The Temperature / Time display
shows the temperature in the appliance.
2.
Touch
to go back to the set temperature. If not, the display shows it
automatically after five seconds.
3.
4.
5.
If necessary, set the DURATION
or
END
function (refer to "Setting the
END" or "Setting the DURATION").
The first steam shows after approximately 2 minutes. An acoustic signal
sounds when the appliance is at approximately the set temperature.
The signal sounds again at the end of
the cooking time.
6.
Touch
to deactivate the acoustic
signal and the appliance.
6.4 Fast Heat Up function
The Fast Heat Up function decreases the
heat up time.
Activating the Fast Heat Up function:
Activate a heating function. Touch and
hold for more than three seconds.
When you activate the Fast Heat Up funcflash one
tion, the bars on the display
Do not put water directly into the
steam generator!
Use only water as the liquid. Do
not use filtered (demineralised) or
distilled water.
Activate the appliance.
Set the steam heating function and
temperature.
When the steam generator is
empty, an acoustic signal sounds.
When the appliance cools down, soak up
all remaining water from the steam gener-
12 www.electrolux.com
ator with the sponge. If necessary, clean
the steam generator with some vinegar.
Let the appliance dry fully with the door
open.
6.6 Energy saving
The appliance contains features which help you save energy during everyday cooking:
• Residual heat:
– When the heating function or programme operates, the heating elements are deactivated 10% earlier
(the lamp and fan continue to operate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions (Duration, End, Time delay).
– When the appliance is off, you can
use the heat to keep food warm. The
Clock / Residual heat display shows
the remaining temperature, and the
bars show the temperature as it decreases.
• Cooking with the lamp off - Touch
to deactivate the lamp during cooking.
• Deactivating the display - If necessary, you can fully deactivate the appliand
at the same
ance. Touch
time until the display goes out. This
step also activates the appliance.
7. CLOCK FUNCTIONS
SYMBOL
FUNCTION
DESCRIPTION
TIME OF DAY
To show the time of day. To change the time of day,
refer to 'Setting the time of day'.
DURATION
To set how long the appliance operates.
END
To set when the appliance deactivates. You can use
Duration and End at the same time (Time delay) if you
want the appliance to activate and deactivate automatically later.
7.1 Count Up Timer
The Count Up Timer starts to count when
the appliance starts to heat.
Reset the Count Up Timer: Touch
and
at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
3.
Touch
or
for DURATION.
4.
Touch
5.
Touch
or
DURATION.
The Count Up Timer is not activated if Duration and End are set.
6.
7.2 Setting the DURATION
1.
Activate the appliance and set a heating function and temperature.
2.
Touch
again and again until the
display shows
.
flashes in the display.
7.
to set the minutes
to confirm.
to set the hours for
If you touch
while you set the
hours for DURATION, the appliance goes to the END function
setting.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the
display. The appliance deactivates.
Touch a sensor field to stop the
acoustic signal.
Deactivate the appliance.
ENGLISH
7.3 Setting the END
1.
Touch
display.
.
13
and "00" flash in the
1.
Activate the appliance and set a heating function and temperature.
2.
2.
Touch
again and again until the
display shows
.
flashes in the
display.
Use
or
to set the MINUTE
MINDER. First you set the seconds
and then minutes and hours.
3.
Touch
and
at the same time
to reset the set time.
4.
Touch
or the MINUTE MINDER
starts automatically after five seconds.
When set time ends, an acoustic signal sounds for two minutes. "00:00"
and
flash in the display.
Touch a sensor field to stop the
acoustic signal.
3.
4.
5.
6.
Touch
or
to set END (first you
set the minutes and then the hours)
to confirm.
and
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the
display. The appliance deactivates.
Touch a sensor field to stop the
acoustic signal.
Deactivate the appliance.
7.4 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a countdown (maximum 2 h 30 min). This function has no effect on the operation of the
appliance. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
5.
6.
7.5 Setting the Time delay
function
DURATION
and END
can be used
at the same time, if the appliance is to be
switched on and off automatically later. In
case first set the DURATION
and then
END
function (refer to "Setting the DURATION" and "Setting the END" ).
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
There are 9 automatic programmes and recipes. You can
find the recipes for the automatic
programmes in the "Recipe
book".
8.1 Automatic programmes
Setting an automatic programme:
1. Activate the appliance.
2.
Touch
. The display shows symbol
and number of the automatic programme.
3.
Touch
or
matic recipes.
4.
Touch
or wait five seconds until
the appliance automatically starts to
work.
to choose the auto-
5.
6.
When set time ends, an acoustic signal operates for two minutes. Symbol
flashes.
The appliance deactivates.
Touch any sensor field to stop an
acoustic signal.
8.2 Automatic programmes with
weight input
If you set the weight of the meat, the appliance calculates the roasting time.
1. Activate the appliance.
2.
Touch
3.
Touch
or
to set the weight
programme (refer to "Recipe book" ).
The display shows: cooking time, du, a default weight, a
ration symbol
unit of measurement (g).
.
14 www.electrolux.com
4.
5.
Touch
or the settings save automatically after five seconds.
The appliance starts. The display
shows a symbol of the weight. During
this time you can change the default
or
. Touch
weight value with
.
6.
7.
When set time ends, an acoustic signal operates for two minutes.
flashes.
The appliance deactivates.
Touch any sensor field to stop an
acoustic signal.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
flashing and
The display shows
the default set core temperature. The
temperature is 60 °C for the first operation, and the last set value for each
subsequent operation.
9.1 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
4.
Touch
or
perature.
5.
Touch
or the settings save automatically after 5 seconds.
There are two temperatures to set:
• The oven temperature: refer to the table
for roasting in the recipe book.
• The core temperature: refer to the table
for the core temperature sensor in the
recipe book.
Only use the core temperature
sensor supplied or the correct replacement parts.
1.
2.
6.
Activate the appliance.
Put the point of the core temperature
sensor (with
on the handle) into
the centre of the meat.
Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
You can set the core temperature
only when
flashes. If
is in
the display but does not flash before you set the core temperature,
touch and
or
to set a
new value.
Set the heating function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol
.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
7.
3.
to set the core tem-
While the appliance calculates the
approximate duration time, the
display shows the count up time.
After the first calculation the display shows the approximate duration of the cooking time.
The appliance continues to calculate the duration during the cooking. The display updates at intervals with the new duration value.
When the meat is at the set core temperature, an acoustic signal sounds
for two minutes and the value of the
flash. The
core temperature and
appliance deactivates.
ENGLISH
8.
Touch a sensor field to deactivate the
acoustic signal.
Remove the core temperature sensor
from the socket and remove the meat
from the appliance.
WARNING!
Be careful when you remove the
core temperature sensor. It is hot.
There is a risk of burns.
When you put the core temperature sensor into the socket, you
cancel the settings for the clock
functions.
15
When you cook with the core
temperature sensor, you can
change the temperature shown in
the display. After you put the core
temperature sensor in the socket
and set a heating function and
temperature, the display shows
the current core temperature.
Touch again and again to see three
other temperatures:
• The set core temperature
• The current oven temperature
• The current core temperature
9.2 Inserting the accessories
Baking tray:
Push the baking tray between the guide
bars of the shelf support.
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Wire shelf and baking tray together:
Push the baking try between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
• All accessories have small indentations
at the top of the right and left side to in-
crease safety. The indentations are also
anti-tip devices.
16 www.electrolux.com
• The high rim around the shelf is a device which prevents cookware from
slipping.
10. ADDITIONAL FUNCTIONS
10.1 My Favourite Programme
function
Use this function to save your favourite
settings of temperature and time for a
heating function.
1. Set the temperature and time for a
heating function or programme.
2.
3.
Touch and hold
for more than
three seconds. An acoustic signal
sounds.
Deactivate the appliance.
Using My Favourite Programme
function:
• To activate the function touch
.
The appliance activates your favourite
programme.
• To deactivate the function touch
. The appliance deactivates your favourite programme.
When the function operates, you
can change the time and temperature.
2.
Touch and hold
and
at the
same time for 2 seconds. An acoustic
signal sounds.
SAFE comes on and goes out in the display.
10.3 Function lock
You can activate the function only when
the appliance operates. The Function
Lock prevents an accidental change of
the heating function.
Activating / deactivating the Function
lock function:
1. Activate the appliance.
2. Activate a heating function or setting.
3.
Touch and hold
and
at the
same time for 2 seconds. An acoustic
signal sounds.
Loc comes on in the display.
You can deactivate the appliance
when the Function lock is on.
When you deactivate the appliance, the Function lock deactivates.
10.2 Child Lock
The Child Lock prevents an accidental
operation of the appliance.
Activating and deactivating the Child
Lock function:
1.
Deactivate the appliance with
not set a heating function.
. Do
10.4 Settings menu
The Settings menu has six settings (from
SET1 to SET6).
You can set the settings menu only when the appliance is off.
Settings menu
Indicator of the setting
menu
Description
Value to set
SET1
RESIDUAL HEAT INDICATOR
ON / OFF
SET21)
KEY TONE
CLICK / BEEP / OFF
SET3
FAULTY TONE
ON / OFF
SET4
BRIGHTNESS
LOW / MEDIUM / HIGH
ENGLISH
Indicator of the setting
menu
Description
Value to set
SET5
SERVICE MENU
---
SET6
RESTORE SETTINGS
YES / NO
17
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
Activate the Settings menu:
1. When the appliance is deactivated,
for three seconds.
touch and hold
The display shows "SET1" and "1"
flashes.
2.
Touch
/
3.
Touch
.
4.
Touch
/
of the setting.
to set the setting.
5.
Touch
.
10.5 Automatic switch-off
For safety reasons the appliance deactivates automatically after some time if a
heating function operates and you do not
change any settings.
to change the value
Oven temperature
Switch-off time
30 °C - 115 °C
12.5 h.
120 °C - 195 °C
8.5 h.
200 °C - 230 °C
5.5 h.
After an automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off works
with all oven functions, apart from
Slow Cook, Core temperature
sensor, Duration, End, Time delay.
10.6 Brightness of the display
There are two modes of the display's
brightness:
• Night brightness:
– When the appliance is deactivated,
the brightness of the display is lower
between 22:00 and 06:00.
• Day brightness:
– When the appliance is activated.
– If you touch a sensor field (apart from
ON / OFF) during the night brightness
mode, the display goes back to the
day brightness mode for the next 10
seconds.
– When the appliance is deactivated
and you set the Minute Minder. When
the Minute Minder function ends, the
display goes back to the night brightness mode.
10.7 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can
continue to operate until the appliance
cools down.
11. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
18 www.electrolux.com
• Clean all oven accessories after each
use and let them dry.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dishwasher. It can cause a damage to the
nonstick coating.
6.
7.
11.1 Steam cleaning
1.
2.
3.
4.
5.
Remove the worst of the dirt manually.
Put approximately 250 ml of water
and 3 tablespoons of vinegar directly
into the steam generator.
Activate the appliance.
Touch
until the display shows
.
The display shows the duration and
default temperature. Touch OK to
start the cleaning.
An acoustic signal sounds when the
steam cleaning is completed.
Touch a sensor field to stop the signal.
Clean the appliance with a soft cloth.
Remove water from the steam generator with the sponge and rub it dry.
Keep the door open for approximately 1 hour to let the appliance
dry fully.
You can use the End function to
delay the start of the cleaning. Refer to "Setting the END".
11.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf support
1.
Carefully pull the support up and out
of the front catch.
2.
Lightly move the support on the front
catch inwards.
ENGLISH
3.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
11.3 Steam generation system
CAUTION!
Dry the steam generator after
each use. Soak up water with the
sponge.
Remove the limescale residue
with water and vinegar.
CAUTION!
Chemical de-scaling agents can
cause damage to the enamel. Follow the instructions of the manufacturer.
2.
3.
4.
5.
19
Pull the support out of the rear catch.
water drawer into the steam generator.
Wait for approximately 10 minutes.
Remove the water and vinegar with
the sponge.
Put clean water (100 - 200 ml) into
the water drawer to flush the steam
generation system.
Remove water from the steam generator with the sponge and rub dry.
Keep the door open to let the appliance dry fully.
11.4 Removing / inserting the
door
To clean the door remove it.
Cleaning the water drawer and the
steam generator:
1. Put the water and vinegar mixture
(approximately 250 ml) through the
CAUTION!
Be careful when you remove the
door from the appliance. The door
is heavy. There is a risk of injury or
damage to the appliance.
A
A
Removing the door
Open the door as far as it goes.
Press down the clamping levers (A)
on the two door hinges.
1.
2.
20 www.electrolux.com
3.
4.
Close the door until it is at an angle
of approximately 45°.
Hold the door with one hand on each
side and pull it away from the appliance at an upwards angle.
Put the door with the outer side
down on a soft and level surface
to prevent scratches.
45°
Inserting the door
To insert the door do the above steps in
the opposite sequence.
11.5 Lamp
WARNING!
Danger of electrocution! Disconnect the fuse before you replace
the lamp.
The lamp and the lamp glass cover can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It prevents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
Replacing the top lamp
Turn the lamp glass cover counterclockwise to remove it.
1.
12. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
2.
3.
4.
5.
Remove the metal ring and clean the
glass cover.
Replace the lamp with a halogen, 230
V, 40 W, 300 °C heat resistant oven
lamp.
Attach the metal ring to the glass cover.
Install the glass cover.
Replacing the side lamp:
Remove the left shelf support.
Use a Torx 20 screwdriver to remove
the cover.
3. Remove and clean the metal frame
and the seal.
4. Replace the lamp with a halogen, 230
V, 25 W, 300 °C heat resistant oven
lamp.
5. Install the metal frame and the seal.
Tighten the screws.
6. Install the left shelf support.
1.
2.
ENGLISH
Problem
Possible cause
21
Solution
The appliance does not
heat up.
The appliance is deactivated.
The appliance does not
heat up.
The time of day is not set. Set the clock. Refer to
"Setting and changing the
time".
The appliance does not
heat up.
The necessary settings
are not set.
Make sure that the settings are correct.
The appliance does not
heat up.
The fuse is released.
Make sure that the fuse is
the cause for the malfunction. If the fuse releases again and again, refer
to an authorized electrician.
The lamp does not operate.
The lamp is defective.
Replace the lamp.
The display shows an error code that is not in this
table.
There is an electronic
fault.
• Deactivate the appliance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows the
error code again, refer
to the Service Center.
The appliance is activated The test mode is activaand does not heat up.
ted.
The fan does not operate.
The display shows
“Demo”.
Activate the appliance.
1.
2.
3.
If you cannot find a solution to the problem yourself, contact your dealer or the
service centre.
Deactivate the appliance.
Touch and hold
until the appliance
activates and deactivates.
Touch and hold
and
at the same
time until an acoustic
signal sounds and
“Demo” goes out.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (Mod.)
.........................................
Product number (PNC)
.........................................
Serial number (Serie:)
.........................................
22 www.electrolux.com
13. INSTALLATION
WARNING!
Refer to the Safety chapters.
min.
3 mm
To lift the appliance, do not use
the door handle.
13.1 Installing the oven
A = appliance
N = recess
B
A
A
180
A
WARNING!
Installation into flammable material
must agree with NIN SEV 1000
(Swiss Association of the Cantonal
Fire Insurance Companies) fire
protection guidelines and regulations.
ca.50
A 595
N 585-592
442
1.
115
CAUTION!
Make sure the cable is free when
you slide the appliance.
N min. 550
20
Use the side handles to hold the appliance and slide it flush into the recess.
A 567
N 560-568
A 592
A
2.
Use a minimum of 2 screws to attach
the appliance on the 2 sides (Detail
A).
ENGLISH
23
13.2 Installing the oven under a
work surface
Before the installation, connect the oven
to the electrical supply. Refer to "Electrical
connection".
B
180
A
A = appliance
N = recess
ca.50
A
N 600
WARNING!
Installation into flammable material
must agree with NIN SEV 1000
(Association of Cantonal Fire Insurers) fire protection guidelines
and regulations.
A 595
442
115
CAUTION!
Make sure the cable is free when
you move the appliance.
N min. 550
A 567
20
N 560-568
1.
Push the cooker into the recess so
that it is flush with the surrounding
units.
2.
Use at least 2 screws to fix the appliance on both sides (Detail A).
A 592
A
min. 20
B
10
20
WARNING!
When installing next to a wood-fuelled boiler, a heatproof and heatinsulating plate must be mounted
at the height of the appliance and
at least 30 cm deep.
A
13.3 Electrical connection
Use a power cable of H05VV-F or higher.
Connect the appliance to a socket supply
line. If there is no socket supply line, the
electrical installation must have an isolation device which lets you disconnect the
appliance from the power supply. The iso-
lation device must have a contact opening
width of minimum 3 mm (in reference to
NIN SEV 1000). The customer must have
a socket for the electrical connection that
is accessible and outside the coordination
room. The length of the connection cable
must be approximately 120 cm with lines
connected directly to the power supply.
24 www.electrolux.com
Only a qualified person can connect the appliance to the electricity supply.
D
E
1.
2.
3.
4.
F
5.
6.
Open the mains terminal cover (D).
Put the connection cable into the
supplied rings (E). This is to prevent
the cable from rubbing against the
drawer. The connection cable is on
the housing side.
Install the cable grip (F).
Connect the terminal as in the illustration.
Put the cable into the strain relief
clamp.
Close the mains terminal cover.
13.4 Connection diagram 400 V
WARNING!
If service is required always disconnect the appliance from the
power supply.
400V
PE L1 L2 L3 N
1
Phase definitions: L1, L2, L3 (or R, S,T)
400V 2N~
400V
400V 3N~
2
3
5
4
PE L1
1
L2 N
2
3
5
4
13.5 Electrical connection with the hob
You can connect the oven to an independent hob from the current range of
Electrolux and AEG hobs. You can purchase the necessary connection cable
separately:
• AK - EB/GKTC (S) 1 m for ceramic
hobs.
• AK - EB/GKTCi (S) 1 m for induction
hobs.
The hob connection socket is at the top
of the oven cabinet.
14.
CH
GARANTIE, GARANZIA, GUARANTEE
ENGLISH
25
14.1 Kundendienst, service-clientèle, Servizio clienti, Customer
Service Centres
Servicestellen
Points de Service
Servizio dopo
vendita
Point of
Service
5506 Mägenwil/Zürich Industriestrasse 10
3018 Bern Morgenstrasse 131
1028 Préver6928 Manno
enges Le Trési 6 Via Violino 11
9000 St. Gallen Zürcherstrasse 204e
4052 Basel St. JakobTurm Birsstrasse 320B
6020 Emmenbrücke Seetalstrasse 11
7000 Chur Comercialstrasse 19
Ersatzteilverkauf/Points de vente de
rechange/Vendita pezzi di ricambio/
spare parts service:
5506 Mägenwil, Industriestrasse 10, Tel.
0848 848 111
Fachberatung/Verkauf/Demonstration/Vente/Consulente (cucina)/Vendita
8048 Zürich, Badenerstrasse 587, Tel.
044 405 81 11
Garantie Für jedes Produkt gewähren wir
ab Verkauf bzw. Lieferdatum an den Endverbraucher eine Garantie von 2 Jahren.
(Ausweis durch Garantieschein, Faktura
oder Verkaufsbeleg). Die Garantieleistung
umfasst die Kosten für Material, Arbeitsund Reisezeit. Die Garantieleistung entfällt
bei Nichtbeachtung der Gebrauchsanweisung und Betriebs-vorschriften, unsachgerechter Installation, sowie bei Beschädigung durch äussere Einflüsse, höhere Gewalt, Eingriffe Dritter und Verwendung von
Nicht-Original Teilen.
Garantie Nous octroyons sur chaque
produit 2 ans de garantie à partir de la
date de livraison ou de la mise en service
au consommateur (documenté au moyen
d’une facture, d’un bon de garantie ou
d’un justificatif d’achat). Notre garantie
couvre les frais de mains d’œuvres et de
déplacement, ainsi que les pièces de rechange. Les conditions de garantie ne
sont pas valables en cas d’intervention
d’un tiers non autorisé, de l’emploi de
pièces de rechange non originales, d’erreurs de maniement ou d’installation dues
à l’inobser-vation du mode d’emploi, et
pour des dommages causés par des influences extérieures ou de force majeure.
Garanzia Per ogni prodotto concediamo
una garanzia di 2 anni a partire dalla data
di consegna o dalla sua messa in funzione. (fa stato la data della fattura, del
certificato di garanzia o dello scontrino
d’acquisto) Nella garanzia sono comprese
le spese di manodopera, di viaggio e del
materiale. Dalla copertura sono esclusi il
logoramento ed i danni causati da agenti
esterni, intervento di terzi, utilizzo di ricambi non originali o dalla inosservanza
delle prescrizioni d’istallazione ed istruzioni per l’uso.
Warranty For each product we provide a
two-year guarantee from the date of purchase or delivery to the consumer (with a
guarantee certificate, invoice or sales receipt serving as proof). The guarantee
covers the costs of materials, labour and
travel. The guarantee will lapse if the operating instructions and conditions of use
are not adhered to, if the product is incorrectly installed, or in the event of damage
caused by external influences, force majeure, intervention by third parties or the
use of non-genuine components.
26 www.electrolux.com
15. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
and electronic appliances. Do not dispose
appliances marked with the symbol
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
27
892934989-D-422013
www.electrolux.com/shop