Electrolux EBCSL70SP User Manual

EBCSL70CN
EBCSL70SP
EN STEAM OVEN
USER MANUAL
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION...................................................................................... 3
2. SAFETY INSTRUCTIONS.....................................................................................4
3. PRODUCT DESCRIPTION................................................................................... 6
4. CONTROL PANEL............................................................................................... 7
5. BEFORE FIRST USE............................................................................................ 9
6. DAILY USE.......................................................................................................... 9
7. CLOCK FUNCTIONS......................................................................................... 14
8. AUTOMATIC PROGRAMMES............................................................................15
9. USING THE ACCESSORIES.............................................................................. 16
10. ADDITIONAL FUNCTIONS............................................................................... 17
11. CARE AND CLEANING....................................................................................18
12. TROUBLESHOOTING......................................................................................20
13. INSTALLATION................................................................................................22
14. ENERGY EFFICIENCY..................................................................................... 24
15. GUARANTEE .................................................................................................. 25
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can be
safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following
data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the result
of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with physical, sensory or
mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction
concerning the use of the appliance in a safe way and
understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of it
appropriately.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are
hot.
If the appliance has a child safety device, this should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
1.2 General Safety
•
•
•
Only a qualified person must install this appliance and
replace the cable.
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements. Children less than 8 years of
age shall be kept away unless continuously supervised.
Always use oven gloves to remove or put in accessories
or ovenware.
4
www.electrolux.com
•
•
•
•
•
•
Before maintenance cut the power supply.
Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service
Centre or similarly qualified persons to avoid an
electrical hazard.
To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the side
walls. Install the shelf supports in the opposite
sequence.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instruction
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is
installed below and adjacent safe
structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
replaced, this must be carried out by
our Authorised Service Centre.
• Do not let mains cables touch or come
near the appliance door, especially
when the door is hot.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
ENGLISH
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation device
must have a contact opening width of
minimum 3 mm.
• This appliance complies with the E.E.C.
Directives.
2.3 Use
WARNING!
Risk of injury, burns and
electrical shock or explosion.
• This appliance is for household use
only.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay
unattended during operation.
• Deactivate the appliance after each
use.
• Be careful when you open the
appliance door while the appliance is in
operation. Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with
water.
• Do not apply pressure on the open
door.
• Do not use the appliance as a work
surface or as a storage surface.
• Open the appliance door carefully. The
use of ingredients with alcohol can
cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
5
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Do not use microwave function to
preheat the oven.
WARNING!
Risk of damage to the
appliance.
• To prevent damage or discoloration to
the enamel:
– do not put ovenware or other
objects in the appliance directly on
the bottom.
– do not put aluminium foil directly
on the bottom of the appliance.
– do not put water directly into the
hot appliance.
– do not keep moist dishes and food
in the appliance after you finish the
cooking.
– be careful when you remove or
install the accessories.
• Discoloration of the enamel has no
effect on the performance of the
appliance.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
• This appliance is for cooking purposes
only. It must not be used for other
purposes, for example room heating.
• Always cook with the oven door
closed.
• If the appliance is installed behind a
furniture panel (e.g. a door) make sure
the door is never closed when the
appliance is in operation. Heat and
moisture can build up behind a closed
furniture panel and cause subsequent
damage to the appliance, the housing
unit or the floor. Do not close the
furniture panel until the appliance has
cooled down completely after use.
2.4 Steam Cooking
WARNING!
Risk of burns and damage to
the appliance.
• Released Steam can cause burns:
– Do not open the appliance door
during the steam cooking
operation.
6
www.electrolux.com
– Open the appliance door with care
after the steam cooking operation.
2.5 Care and cleaning
WARNING!
Risk of injury, fire, or damage
to the appliance.
2.6 Internal light
• The type of light bulb or halogen lamp
used for this appliance is only for
household appliances. Do not use it for
house lighting.
WARNING!
Risk of electrical shock.
• Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
• Make sure the appliance is cold. There
is the risk that the glass panels can
break.
• Replace immediately the door glass
panels when they are damaged.
Contact the Authorised Service Centre.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Clean regularly the appliance to
prevent the deterioration of the surface
material.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal
objects.
• If you use an oven spray, obey the
safety instructions on the packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of detergent.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same
specifications.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable close
to the appliance and dispose of it.
• Remove the door catch to prevent
children or pets from becoming
trapped in the appliance.
2.8 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
3. PRODUCT DESCRIPTION
3.1 General overview
1
2
3
4
9
3
5
2
6
1
7
8
1
2
3
4
5
6
7
8
9
Control panel
Water drawer
Electronic programmer
Heating element
Lamp
Fan
Steam generator with cover
Shelf support, removable
Shelf positions
ENGLISH
3.2 Accessories
Glass dish with 2 grill inserts
Wire shelf
Sponge
For cookware, cake tins, roasts.
Baking tray
For absorbing the remaining water from
the steam generator.
For cakes and biscuits.
4. CONTROL PANEL
4.1 Electronic programmer
1
2
3
4
5
6
7
8
9
10
11
Use the sensor fields to operate the appliance.
Sensor
field
1
2
-
Function
Comment
Display
Shows the current settings of the appliance.
ON / OFF
To activate and deactivate the appliance.
7
8
www.electrolux.com
Sensor
field
3
4
5
6
7
8
9
10
11
Function
Comment
Heating Functions or Assisted
Cooking
Touch the sensor field once to choose a heating
function or the menu: Assisted Cooking. Touch
the sensor field again to switch between the menus: Heating Functions, Assisted Cooking. To
activate or deactivate the light, touch the field for
3 seconds. You can activate the light also when
the appliance is deactivated.
Favourite Programme
To save and access your favourite programmes.
Temperature selection
To set the temperature or show the current temperature in the appliance. Touch the field for 3
seconds to activate or deactivate the function:
Fast heat up.
Down key
To move down in the menu.
Up key
To move up in the menu.
OK
To confirm the selection or setting.
Home key
To go back one level in the menu. To show the
main menu, touch the field for 3 seconds.
Time and additional functions
To set different functions. When a heating function operates, touch the sensor field to set the
timer or the functions: Function Lock, Favourite
Programme, Heat + Hold, Set + Go.
Minute Minder
To set the function: Minute Minder.
4.2 Display
A
B
C
E
D
A.
B.
C.
D.
E.
Heating function
Time of day
Heat-up indicator
Temperature
Duration time or end time of a function
Other indicators of the display:
Symbol
Function
Minute Minder
The function operates.
ENGLISH
Symbol
9
Function
Time of day
The display shows the current time.
Duration
The display shows the necessary
time for cooking.
End Time
The display shows when the cooking
time is complete.
Temperature
The display shows the temperature.
Time Indication
The display shows how long the
heating function operates. Press
and
time.
at the same time to reset the
Heat-up Indicator
The display shows the temperature in
the appliance.
Fast Heat Up Indicator
The function is active. It decreases
the heat up time.
Weight Automatic
The display shows that the automatic
weight system is active or that weight
can be changed.
Heat + Hold
The function is active.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
Refer to "Care and cleaning"
chapter.
Clean the appliance before first use.
Put the accessories and the removable
shelf supports back to their initial position.
5.2 First Connection
When you connect the appliance to the
mains or after the power cut, you have to
set the language, the display contrast, the
display brightness and the time of the day.
1. Press
or
2. Press
to confirm.
to set the value.
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Navigating the menus
1. Activate the appliance.
2. Press
option.
or
to select the menu
3. Press
to move to the submenu or
accept the setting.
At each point you can go
back to the main menu with
.
10
www.electrolux.com
6.2 The menus in overview
Main menu
Symbol
Menu item
Application
Heating Functions
Contains a list of heating functions.
SousVide cooking
Contains a heating function and a list of automatic programmes.
Assisted Cooking
Contains a list of automatic programmes.
Favourite Programme
Contains a list of favourite cooking programmes
created by the user.
Assisted Cleaning
Contains a list of cleaning programmes.
Basic Settings
You can use it to set other settings.
Specials
Contains a list of additional heating functions.
Submenu for: Basic Settings
Symbol
Submenu
Description
Set Time of Day
Sets the current time on the clock.
Time Indication
When ON, the display shows the current time
when you deactivate the appliance.
Set + Go
When ON, in the Select Options window you
can choose the function: Set + Go.
Heat + Hold
When ON, in the Select Options window you
can choose the function: Heat + Hold.
Extra Time
Activates and deactivates the time extension
function.
Display Contrast
Adjusts the display contrast by degrees.
Display Brightness
Adjusts the display brightness by degrees.
Set Language
Sets the language for the display.
Buzzer Volume
Adjusts the volume of press-tones and signals
by degrees.
Key Tones
Activates and deactivates the tone of the touch
fields. It is not possible to deactivate the tone of
the ON / OFF touch field.
Alarm/Error Tones
Activates and deactivates the alarm tones.
Cleaning Assistant
Guides you through the cleaning procedure.
ENGLISH
Symbol
Submenu
Description
Service
Shows the software version and configuration.
Factory Settings
Resets all settings to factory settings.
6.3 Submenu for: SousVide
cooking
11
"under vacuum". The name refers to a
method of cooking in vacuum sealed
plastic pouches at low temperatures.
This technique has its start in the Sousvide technology, which in French means
Symbol
Menu item
Description
SousVide Cooking mode
Uses the steam for meat, fish, seafood,
vegetables and fruits. Set the temperature
50 °C - 95 °C.
SousVide recipes
Contains a list of automatic programmes.
6.4 Submenu for: Assisted Cleaning
Symbol
Menu item
Description
Steam Cleaning
Cleaning the appliance with steam.
Decalcification
Cleaning the steam generator.
6.5 Heating Functions
Heating function
Application
True Fan Cooking
To bake on up to 2 shelf positions at the same
time and to dry food.
Moist Fan Baking
To save energy when you bake and cook dry
baked goods. Also to bake baked goods in tins
on 1 shelf position.
Slow Cooking
To prepare tender, succulent roasts.
Grilling
To grill flat food and to toast bread.
Turbo Grilling
To roast larger meat joints or poultry with bones
on 1 shelf position. Also to make gratins and to
brown.
12
www.electrolux.com
Heating function
Application
Steam Regenerating
To reheat already cooked food directly on a
plate.
Quarter Steam + Heat
To bake bread, roast large pieces of meat or to
warm up chilled and frozen meals.
Half Steam + Heat
For dishes with a high moisture content and for
poaching fish, custard royale and terrines.
Full Steam
For vegetables, fish, potatoes, rice, pasta or
special side-dishes.
6.6 Specials
Heating function
Application
Bread Baking
To bake bread.
Au Gratin
For dishes such as lasagna or potato gratin. Also to gratinate and brown.
Dough Proving
For controlled rising of yeast dough before baking.
Plate Warming
To preheat your plate for serving.
Preserving
To make vegetable preserves such as pickles.
Keep Warm
To keep food warm.
Defrost
To defrost frozen food.
6.7 Activating a heating function
6.8 Steam cooking
1. Activate the appliance.
2. Select the menu: Heating Functions.
The water drawer cover is in the control
panel.
3. Press
to confirm.
4. Set a heating function.
5. Press
to confirm.
6. Set the temperature.
7. Press
to confirm.
ENGLISH
WARNING!
Do not put water directly into
the steam generator.
Use only water. Do not use
filtered (demineralised) or
distilled water. Do not use
other liquids. Do not put
flammable or alcoholic liquids
into the water drawer.
1. Prepare the food in the correct
cookware.
2. Press the cover of the water drawer to
open it.
3. Fill the water drawer with 700 ml of
water.
The water supply is sufficient for
approximately 30 minutes.
4. Push the water drawer to its initial
position.
5. Activate the appliance.
6. Select a steam heating function and
the temperature.
7. If necessary, set the function Duration
or End Time
.
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature.
When the steam generator is
empty, an acoustic signal
sounds.
The signal sounds at the end of the
cooking time.
8. Deactivate the appliance.
9. Empty the water drawer after the
steam cooking is completed.
CAUTION!
The appliance is hot.
There is a risk of burns.
Be careful when you
empty the water drawer.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with the
door open.
13
6.9 SousVide cooking
• With no evaporative losses of flavour
volatiles and moisture, food keeps its
full aroma
• Tender texture of meat and fish
• Food keeps all minerals and vitamins
• Less spices are necessary as food
keeps its natural flavour
• Better workflow as it is not necessary
to prepare and serve food at the same
time and place
• Low cooking temperature minimizes
the risk of overcooking
• Portioning of the food makes it easy to
hold
Preparing the food
1. Clean and cut the ingredients.
2. Season the ingredients.
3. Fill the ingredients in suitable vacuum
bags.
4. Vacuum seal the bag to make sure
that you remove as much air as
possible.
5. Cold storage of the bags is mandatory
in case the cooking procedure is not
done immediately.
6. Continue with the function: SousVide
cooking following applicable cooking
table indications for the considered
type of food or the assisted cooking
recipes.
7. Open the pouch and serve.
8. Optional: finish the food with a final
searing or grilling e.g. for meat to
achieve a nice crust and the typical
roast flavour.
Activating a function: SousVide
Cooking mode
1. Activate the appliance.
2. Select the menu: SousVide cooking.
to confirm.
3. Press
4. Set the function: SousVide Cooking
mode.
5. Press
to confirm.
6. Set the temperature.
7. Press
to confirm.
14
www.electrolux.com
6.10 Heat-up indicator
Cooking with this function
causes residual water on the
vacuum bags and in the
cavity. After the cooking
process open the door
carefully to avoid the water
dropping on the furniture.
Use a plate and a towel to
take out the vacuum bags.
Dry out the door, the water
drop collector in the bottom
and the cavity with a soft
cloth or a sponge. Let the
appliance dry fully with the
door open. To speed up the
drying you can heat up the
appliance with hot air at
temperature 150 °C for
approximately 15 minutes.
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
6.11 Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold for 3
seconds. The heat-up indicator alternates.
6.12 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
Application
Minute Minder
To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of
the appliance. You can also activate it when
the appliance is deactivated.
Use
or
to activate the function. Press
to set the minutes and
to start.
Duration
To set the length of an operation (max. 23 h
59 min).
End Time
To set the switch-off time for a heating
function (max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the
appliance deactivates the
heating elements after 90 %
of the set time. The appliance
uses the residual heat to
continue the cooking process
until the time ends (3 - 20
minutes).
ENGLISH
7.2 Setting the clock functions
• Before you use the
functions: Duration, End
Time, you must set a
heating function and
temperature first. The
appliance deactivates
automatically.
• You can use the functions:
Duration and End Time at
the same time if you want
to automatically activate
and deactivate the
appliance on a given time
later.
1. Set a heating function.
again and again until the
2. Press
display shows the necessary clock
function and the related symbol.
3. Press
time.
or
to set the necessary
4. Press
to confirm.
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press a sensor field to stop the signal.
7.3 Heat + Hold
Conditions for the function:
• The set temperature is more than 80
°C.
15
• The function: Duration is set.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It
activates after the baking or roasting
procedure ends.
You can activate or deactivate the function
in the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
again and again until the
4. Press
display shows: Heat + Hold.
5. Press
to confirm.
When the function ends, an acoustic
signal sounds.
The function stays on if you change the
heating functions.
7.4 Extra Time
The function: Extra Time makes the
heating function continue after the end of
Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
1. When the cooking time ends, an
acoustic signal sounds. Press a
sensor field.
The display shows the message.
to activate or
to cancel.
2. Press
3. Set the length of the function.
4. Press
.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
Press
to confirm.
3. Select the category and dish. Press
to confirm.
4. Select a recipe. Press
to confirm.
When you use the function:
Manual, the appliance uses
the automatic settings. You
can change them as with
other functions.
16
www.electrolux.com
8.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
1. Activate the appliance.
2. Select the menu: Assisted Cooking.
to confirm.
Press
3. Select the category and dish. Press
to confirm.
4. Select the function: Weight Automatic.
Press
5. Touch
The automatic programme starts.
6. You can change the weight at any
time. Press
or
to change the
weight.
7. When the time ends, an acoustic
signal sounds. Press a sensor field to
deactivate the signal.
With some programmes turn
over the food after 30
minutes. The display shows a
reminder.
to confirm.
or
weight. Press
to set the food
to confirm.
9. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
9.1 Inserting the accessories
CAUTION!
Do not use the baking tray or
deep pan with the function:
Full Steam.
Wire shelf:
Wire shelf and baking tray together:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Push the baking tray between the guide
bars of the shelf support and the wire shelf
on the guide bars above.
Baking tray:
Push the baking tray between the guide
bars of the shelf support.
ENGLISH
17
• All accessories have small
indentations at the top of
the right and left side to
increase safety. The
indentations are also antitip devices.
• The high rim around the
shelf is a device which
prevents cookware from
slipping.
10. ADDITIONAL FUNCTIONS
10.1 Favourite Programme
You can save your favourite settings, such
as duration, temperature or heating
function. They are available in the menu:
Favourite Programme. You can save 20
programmes.
Saving a programme
1. Activate the appliance.
2. Set a heating function or an automatic
programme.
3. Touch
again and again until the
display shows: SAVE.
to confirm.
4. Press
The display shows the first free memory
position.
to confirm.
5. Press
6. Enter the name of the programme.
The first letter flashes.
7. Touch
or
to change the letter.
to save.
10. Press and hold
You can overwrite a memory position.
When the display shows the first free
or
1. Activate the appliance.
2. Select the menu: Favourite
Programme.
3. Press
to confirm.
4. Select your favourite programme
name.
5. Press
to confirm.
Press
to go directly to menu: Favourite
Programme.
10.2 Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
1. Activate the appliance.
and
at the same time
2. Touch
until the display shows a message.
To deactivate the Child Lock function
repeat step 2.
10.3 Function Lock
.
8. Press
The next letter flashes.
9. Do step 7 again as necessary.
memory position, touch
Activating the programme
and
press
to overwrite an existing
programme.
You can change the name of a
programme in the menu: Edit Programme
Name.
This function prevents an accidental
change of the heating function. You can
activate it only when the appliance
operates.
1. Activate the appliance.
2. Set a heating function or setting.
again and again until the
3. Press
display shows: Function Lock.
4. Press
to confirm.
18
www.electrolux.com
To deactivate the function, press
. The
display shows a message. Press
again
and then
to confirm.
When you deactivate the
appliance, the function also
deactivates.
10.4 Set + Go
The function lets you set a heating
function (or a programme) and use it later
with one press of a sensor field.
Temperature (°C)
Switch-off time
(h)
30 - 115
12.5
120 - 195
8.5
200 - 230
5.5
The Automatic switch-off
does not work with the
functions: Light, End Time,
Duration.
1. Activate the appliance.
2. Set a heating function.
10.6 Brightness of the display
again and again until the
3. Press
display shows: Duration.
4. Set the time.
There are two modes of display
brightness:
5. Press
again and again until the
display shows: Set + Go.
6. Press
to confirm.
Press a sensor field (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
• Function Lock is on when
the heating function
operates.
• The menu: Basic Settings
lets you activate and
deactivate the function:
Set + Go.
10.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time
if a heating function operates and you do
not change any settings.
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the function: Minute
Minder. When the function ends,
the display goes back to the night
brightness.
10.7 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.
11. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
11.1 Notes on cleaning
• Clean the front of the appliance with a
soft cloth with warm water and a
cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
ENGLISH
• Clean the appliance interior after each
use. Fat accumulation or other food
remains may result in a fire.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
11.2 Removing the shelf
supports
Before maintenance, make sure that the
appliance is cool. There is a risk of burns.
To clean the appliance, remove the shelf
supports.
1. Pull carefully the supports up and out
of the front catch.
1
3
2
2. Pull the front end of the shelf support
away from the side wall.
3. Pull the supports out of the rear catch.
Install the shelf supports in the opposite
sequence.
11.3 Steam Cleaning
Remove as much dirt as possible
manually.
Clean the inner door glass with a soft cloth
with warm water and a cleaning agent.
Remove the shelf support to clean the
side walls.
19
CAUTION!
For a better performance you
should start the cleaning
function when the appliance
is cool. Check the residual
heat.
Always use the function after cooking with
steam.
When the function is active, the lamp is
off.
1. Put 250 ml of water mixed with 3
tablespoons of vinegar (without herbs)
directly into the steam generator.
2. In the menu choose: Assisted
Cleaning.
3. Activate the function: Steam Cleaning.
The display shows the duration of the
function (33 minutes).
An acoustic signal sounds when the
programme is completed.
4. Touch a sensor field to deactivate the
signal.
5. Wipe the internal surface of the
appliance with a soft sponge.
6. Remove the remaining water from the
steam generator.
7. After cleaning keep the appliance door
open for approximately 1 hour. Wait
until the appliance is dry. To speed up
the drying you can heat up the
appliance with hot air at temperature
150 °C for approximately 15 minutes.
You can get maximum effects of the
cleaning function if you manually clean the
appliance immediately after the function
ends.
Use the function two times if the level of
dirt is high. Make sure that the appliance
is cool before you activate the second
cycle.
11.4 Decalcification of the
Steam generator
1. Put 250 ml of water mixed with 3
tablespoons of vinegar directly into the
steam generator.
2. In the menu choose: Assisted
Cleaning.
3. Activate the function: Decalcification.
The display shows the duration of the
function (15 minutes).
20
www.electrolux.com
An acoustic signal sounds when the
programme is completed.
4. Touch a sensor field to deactivate the
signal.
5. Remove the remaining water from the
steam generator.
6. Keep the door open for approximately
1 hour to let the appliance dry fully. To
speed up the drying you can heat up
the appliance with hot air at
temperature 150 °C for approximately
15 minutes.
11.5 Removing the oven door
Remove the door to clean the inner side of
the appliance more easily.
WARNING!
Be careful when you remove
the door from the appliance.
The door is heavy.
1. Open the door fully.
2. Fully release the clamping levers on
the hinges.
2
4
3
3. Hold the door on the two sides and
close it approximately 3/4 of the way.
4. Pull the door away from the appliance.
5. Put the door with the outer side down
on a soft cloth on a stable surface.
This is to prevent scratches.
11.6 Installing the oven door
WARNING!
Be careful when you install
the door. The door is heavy.
1. Hold the door on the two sides at an
angle of approximately 60°.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
3
5
4
60º 4
2. At the same time push the door
hinges as far as they can go into the
two recesses at the bottom of the
appliance on the left and the right.
3. Lift the door up until you are at the
point of resistance and then open it as
far as possible.
4. Fully lock the clamping levers on the
hinges.
5. Close the door of the appliance.
11.7 Replacing the lamp
Put a cloth on the bottom of the interior of
the appliance. It prevents damage to the
lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The side lamp
1. Remove the left shelf support to get
access to the lamp.
2. Use a Torx 20 screwdriver to remove
the cover.
3. Remove and clean the metal frame
and the seal.
4. Replace the lamp with a halogen, 230
V, 40 W, 300 °C heat resistant lamp.
5. Install the metal frame and the seal.
Tighten the screws.
6. Install the left shelf support.
21
ENGLISH
12.1 What to do if...
Problem
Possible cause
Remedy
The oven does not heat up. The oven is deactivated.
Activate the oven.
The oven does not heat up. The clock is not set.
Set the clock.
The oven does not heat up. The necessary settings are
not set.
Make sure that the settings
are correct.
The oven does not heat up. The automatic switch-off is
activated.
Refer to "Automatic switchoff".
The oven does not heat up. The Child Lock is on.
Refer to "Using the Child
Lock".
The oven does not heat up. The door is not closed correctly.
Fully close the door.
The oven does not heat up. The fuse is released.
Make sure that the fuse is
the cause of the malfunction. If the fuse releases
again and again, contact a
qualified electrician.
The lamp does not operate. The lamp is defective.
Replace the lamp.
The display shows an error
code that is not in this table.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact the Customer Care
Department.
There is an electrical fault.
Steam and condensation
You left the dish in the oven Do not leave the dishes in
settle on the food and in the for too long.
the oven for longer than 15
cavity of the oven.
- 20 minutes after the cooking process ends.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
The demo mode is activated.
1. Deactivate the appliance.
2. Touch and hold
until
the appliance activates
and deactivates.
3. Touch and hold
and
at the same time until an acoustic signal
sounds. "Demo" goes
out.
22
www.electrolux.com
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
The necessary data for the service centre
is on the rating plate. The rating plate is on
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
13. INSTALLATION
WARNING!
Refer to Safety chapters.
min.
3 mm
13.1 Lifting the appliance
To lift the appliance, do not use the door
handle.
ENGLISH
13.2 Building in
• Cable length: 2.50 m from appliance
• Plug: version 12
A = Appliance, N = Recess
During installation in
combustible matter, NIN SEV
1000 and fire protection
guidelines and regulations of
the Association of Cantonal
Fire Insurance shall be strictly
adhered to.
B
A
A
23
A
~50 mm
A 388
mm
N 380-388
mm
N min.
550 mm
252 mm
20
mm
A 567
mm
N 560 mm
A 592 mm
1. Place the appliance in front of the
recess and connect the mains plug.
Make sure the cable is free when you
slide the appliance.
2. Push the appliance into the recess.
3. Use a minimum of 2 screws to attach
the oven on the 2 sides (A).
A
B
13 mm
N
A
20 mm
13.3 Electrical connection
WARNING!
If service is required always
disconnect the appliance
from the power supply.
Use a power cable of H05VV-F or higher.
Install the appliance with a socket supply
line. If there is no socket supply line, the
fixed home electrical system must include
an isolating device with at least a 3 mmcontact separation to enable a
simultaneous and all-pole cut off from the
mains (according to NIN SEV 1000). The
customer must have a socket for the
electrical connection that is accessible
and outside the coordination room. The
length of the connection cable must be
approximately 120 cm with lines
connected directly to the mains.
Only a qualified person can
connect the appliance to the
electricity supply.
1. Do the electrical connections as in the
connection illustration.
2. Secure the cable grip.
24
www.electrolux.com
14. ENERGY EFFICIENCY
14.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Electrolux
Model identification
EBCSL70CN
EBCSL70SP
Energy Efficiency Index
105.8
Energy efficiency class
A
Energy consumption with a standard load, fanforced mode
0.73 kWh/cycle
Number of cavities
1
Heat source
Electricity
Volume
34 l
Type of oven
Built-In Oven
Mass
EN 60350-1 - Household electric cooking
appliances - Part 1: Ranges, ovens, steam
ovens and grills - Methods for measuring
performance.
14.2 Energy saving
•
The appliance contains features which
help you save energy during everyday
cooking.
•
• General hints
– Make sure that the oven door is
closed properly when the
appliance operates and keep it
closed as much as possible during
the cooking.
– Use metal dishes to improve the
energy saving.
– When possible, put the food inside
the oven without heating it up.
– When the cooking duration is
longer than 30 minutes, reduce the
oven temperature to minimum, 3 10 minutes before the end of the
cooking time, depending on the
•
•
EBCSL70CN
34.8 kg
EBCSL70SP
34.8 kg
duration of the cooking. The
residual heat inside the oven will
continue to cook.
– Use the residual heat to warm up
other foods.
Cooking with fan - when possible,
use the cooking functions with fan to
save energy.
Residual heat
– In some heating functions if a
programme with time selection
(Duration, End Time) is activated
and the cooking time is longer than
30 minutes, the heating elements
deactivate automatically 10%
earlier. The fan and lamp continue
to operate.
Cooking with the lamp off deactivate the lamp during the cooking
and activate only when you need it.
Keep food warm - if you want to use
the residual heat to keep the meal
warm, choose the lowest possible
temperature setting. The display shows
the residual heat temperature.
ENGLISH
15.
CH
25
GUARANTEE
Customer Service Centres
Point of Service
Industriestrasse 10
5506 Mägenwil
Le Trési 6
1028 Préverenges
Via Violino 11
6928 Manno
Morgenstrasse 131
3018 Bern
Zürcherstrasse 204E
9000 St. Gallen
Seetalstrasse 11
6020 Emmenbrücke
St. Jakob-Turm Birsstrasse 320B
4052 Basel
Comercialstrasse 19
7000 Chur
Spare parts service Industriestrasse 10,
5506 Mägenwil, Tel. 0848 848 111
Specialist advice/Sale Badenerstrasse
587, 8048 Zürich, Tel. 044 405 81 11
Warranty For each product we provide a
two-year guarantee from the date of
purchase or delivery to the consumer (with
a guarantee certificate, invoice or sales
receipt serving as proof). The guarantee
covers the costs of materials, labour and
travel. The guarantee will lapse if the
operating instructions and conditions of
use are not adhered to, if the product is
incorrectly installed, or in the event of
damage caused by external influences,
force majeure, intervention by third parties
or the use of non-genuine components.
16. ENVIRONMENT CONCERNS
Please recycle all materials marked with
the symbol . Dispose of all packaging
materials appropriately and help to protect
the environment, and future generations.
Do not dispose of electrical equipment
marked with the symbol along with the
general house hold waste. Dispose all
electrical goods via applicable local
authority collections, or at local authority
or, commercial recycling centres.
*
For Switzerland:
Where should you take your
old equipment?
Anywhere that sells new
equipment or hand it in to
official SENS collection points
or official SENS recycling
firms.
The list of official SENS
collection points can be
found at www.erecycling.ch
26
www.electrolux.com
ENGLISH
27
867316223-B-142016
www.electrolux.com/shop