Kenroy Home 21041SL Instructions / Assembly

 Po SHADE ne
| 1
ULL CHAIN
SWITCH
BODY
POWER
CORD
TTL
4/10
ASSEMBLY [INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO
ASSEMBLY.
UNPACK THE LAMP
YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE
PACKAGE: LAMP BODY.
ASSEMBLE THE LAMP
1. INSTALL A 60 WATT MAXIMUM MEDIUM BASE TYPE "A"
BULB (NOT INCLUDED) INTO SOCKET.
2. PLUG THE POWER CORD INTO AN OUTLET AND PULL
CHAIN TO TURN LAMP ON.
BULB REPLACEMENT
1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE
AND BULB ARE COOL AND LAMP IS UNPLUGGED.
2. UNSCREW EXISTING BULB FROM SOCKET AND REPLACE
WITH A NEW BULB. PLUG POWER SUPPLY CORD BACK INTO
OUTLET.
TROUBLE SHOOTING
1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE
OUTLET. MAKE SURE THE PLUG IS FULLY AND PROPERLY
INSERTED INTO THE POWER OUTLET.
2. IF LAMP STILL DOES NOT LIGHT, UNPLUG FROM OUTLET.
CHECK THE BULB FOR A BROKEN FILAMENT. REPLACE BULB
IF NECESSARY, PLUG IN LAMP AND TURN IT ON.
3. IF THE LAMP STILL DOES NOT LIGHT, PLEASE CONTACT
YOUR DISTRIBUTOR OR PLACE OF PURCHASE.
IMPORTANT SAFETY INSTRUCTIONS
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE
IS WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE
RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT
FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL
DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER
USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY
INSERTED. DO NOT ALTER THE PLUG.
21041SL INSTRUCTIONS