Kenroy Home 20119BS Instructions / Assembly

 MODEL: 20119
PACKING DIAGRAM
SHADE
CARDBOARD
PU
STYROFOAM: 12 KGS.
SOCKET ASSEMBLY POLE (2 PCS)
& SOCKET RING:
TYROFOAM: 12 KGS.
40
BASE
ARDBOARD
y
SHADE
20119SHBS
(REPLACEMENT PART)
HUE, SOCKET RING
» ” SRP
77 N x
I OCKET
SWITCH
SOCKET
ASSEMBLY
—— UPPER POLE
OH
«LOWER POLE
POWE
BASE: _
5/10
ASSEMBLY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO
ASSEMBLY.
THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO
ASSEMBLE.
MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.
UNPACK THE LAMP
YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE
PACKAGE: SOCKET RING, SHADE, SOCKET ASSEMBLY, (2)
POLES AND BASE. TO PROTECT THE FINISH, PLACE ALL
PARTS ON A SOFT SURFACE.
ASSEMBLE THE LAMP
1. CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A
SMOOTH, FLAT SURFACE. LINE UP ALL OF THE PARTS
ACCORDING TO THE ASSEMBLY DIAGRAM.
2. SCREW LOWER POLE TO TOP OF BASE.
3. SCREW UPPER POLE TO TOP OF LOWER POLE.
4. SCREW SOCKET ASSEMBLY TO TOP OF UPPER POLE.
5. PLACE HARP OF SHADE OVER SOCKET AND SECURE WITH
SOCKET RING.
6. INSTALL A 150 WATT MAXIMUM MEDIUM BASE 3—WAY TYPE
"A" BULB (NOT INCLUDED) INTO SOCKET.
7. PLUG THE POWER CORD INTO AN OUTLET AND TURN ON
AT SWITCH.
BULB REPLACEMENT
1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE
AND BULB ARE COOL AND LAMP IS UNPLUGGED.
2. UNSCREW EXISTING BULB FROM SOCKET AND REPLACE
WITH A NEW BULB. PLUG POWER SUPPLY CORD BACK INTO
OUTLET.
TROUBLE SHOOTING
1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE
OUTLET. MAKE SURE THE PLUG IS FULLY AND PROPERLY
INSERTED INTO THE POWER OUTLET.
2. IF LAMP STILL DOES NOT LIGHT, UNPLUG FROM OUTLET.
CHECK THE BULB FOR A BROKEN FILAMENT. REPLACE BULB
IF NECESSARY, PLUG IN LAMP AND TURN IT ON.
3. IF THE LAMP STILL DOES NOT LIGHT, PLEASE CONTACT
YOUR DISTRIBUTOR OR PLACE OF PURCHASE.
IMPORTANT SAFETY INSTRUCTIONS
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE
IS WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE
RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT
FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL
DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER
USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY
INSERTED. DO NOT ALTER THE PLUG.
AVAILABLE PART IS:
20119SHBS (SHADE)
20119BS INSTRUCTIONS