Electrolux EWG147540W User Manual


Add to my manuals
36 Pages

advertisement

Electrolux EWG147540W User Manual | Manualzz
EWG 147540 W
EN
Washing Machine
User Manual
2
www.electrolux.com
CONTENTS
1. SAFETY INFORMATION....................................................................................3
2. SAFETY INSTRUCTIONS..................................................................................4
3. PRODUCT DESCRIPTION................................................................................ 6
4. CONTROL PANEL............................................................................................. 7
5. PROGRAMMES ................................................................................................ 9
6. CONSUMPTION VALUES................................................................................11
7. OPTIONS..........................................................................................................12
8. SETTINGS........................................................................................................14
9. BEFORE FIRST USE....................................................................................... 14
10. DAILY USE..................................................................................................... 14
11. HINTS AND TIPS........................................................................................... 17
12. CARE AND CLEANING..................................................................................18
13. TROUBLESHOOTING....................................................................................22
14. INSTALLATION.............................................................................................. 25
15. TECHNICAL DATA.........................................................................................33
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the
result of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
1.1 Children and vulnerable people safety
•
•
•
•
•
•
•
•
•
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away unless continuously supervised.
Children of less than 3 years of age should be kept
away unless continuously supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2 General Safety
•
•
Do not change the specification of this appliance.
This appliance is intended to be used in household
and similar applications such as:
– staff kitchen areas in shops, offices and other
working environments;
4
www.electrolux.com
by clients in hotels, motels, bed & breakfast and
other residential type environments;
– areas for communal use in blocks of flats or in
launderettes.
Do not exceed the maximum load of 7 kg (refer to the
"Programme chart" chapter).
The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
The ventilation opening in the base must not be
covered by a carpet, mat, or any floor covering.
The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
–
•
•
•
•
•
•
•
•
•
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply
with relevant national
regulations.
•
•
Remove all the packaging and the
transit bolts including rubber bush
with plastic spacer.
Keep the transit bolts in a safe place.
If the appliance is to be moved in the
future they must be reattached to lock
•
•
•
•
the drum to prevent an internal
damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Do not install or use the appliance
where the temperature can be less
ENGLISH
•
•
•
•
•
•
•
than 0°C or where it is exposed to the
weather.
The floor area on which the appliance
is to be installed must be flat, stable,
heat resistant and clean.
Make sure that there is air circulation
between the appliance and the floor.
When the appliance is in its
permanent position, check if it is
levelled correctly with the aid of a
spirit level. If it is not, adjust the feet
accordingly.
Do not install the appliance directly
above a floor drain.
Do not spray water on the appliance
and do not expose it to excessive
humidity.
Do not install the appliance where the
appliance door cannot be fully
opened.
Do not put a closed container to
collect possible water leakage under
the appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
•
2.3 Water connection
•
•
•
•
•
•
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
•
•
•
•
•
•
•
•
The appliance must be earthed.
Always use a correctly installed
shockproof socket.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need to
be replaced, this must be carried out
by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not touch the mains cable or the
mains plug with wet hands.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
5
This appliance complies with the
E.E.C. Directives.
Do not cause damage to the water
hoses.
Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
Do not use an extension hose if the
inlet hose is too short. Contact the
service centre for the replacement of
the inlet hose.
It is possible to see water flowing from
the drain hose. This is due to the
testing of the appliance with the use
of water in the factory.
You can extend the drain hose to
maximum 400 cm. Contact the
service centre for the other drain hose
and the extension.
2.4 Use
WARNING!
Risk of injury, electric shock,
fire, burns or damage to the
appliance.
•
•
•
•
•
Follow the safety instructions on the
detergent packaging.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Make sure that all metal objects are
removed from the laundry.
Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine.
Prewash such fabrics by hand before
loading them into the washing
machine.
Do not touch the glass door while a
programme is in operation. The glass
can get hot.
6
www.electrolux.com
2.5 Service
•
•
•
To repair the appliance contact an
Authorised Service Centre.
Use original spare parts only.
•
2.6 Disposal
•
WARNING!
Risk of injury or suffocation.
•
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
Disconnect the appliance from the
mains electrical and water supplies.
3. PRODUCT DESCRIPTION
3.1 Appliance overview
1
2
7
8
9
3
4
5
6
1
2
3
4
5
6
7
8
9
10
Detergent dispenser
Control panel
Door handle
Rating plate
Drain pump filter
Feet for levelling the appliance
Water drain hose
Mains cable
Water inlet hose connection
Feet for levelling the appliance
3.2 How to activate the child
safety device
This device prevents children or pets
from being closed in the drum.
10
Turn the device clockwise, until the
groove is horizontal.
You cannot close the door.
To close the door, turn the device
anticlockwise until the groove is vertical.
ENGLISH
4. CONTROL PANEL
4.1 Control panel description
2
1
9
3
8
1 Programme knob
2 Display
3 Time Manager buttons
7
6
5
4
6 Extra Rinse button
7 Easy Iron button
8 Spin button
4 Start/Pause button
9 Temperature button
5 Delay Start button
4.2 Display
A
L
K
J
I
B
H
C
G
F
D
E
The display show the following information:
A.
: Delay start indicator. When you
set a delay, the indicator illuminates
on the display.
B. Washing indicators: When a
programme is set, all the phases
indicators of a programme illuminate.
When the programme starts, the
indicators flash and remain on
according the programme progress.
•
: Pre washing phase
•
: Washing phase
•
: Rinses phase
•
: Draining phase
7
8
www.electrolux.com
•
C.
: Spinning phase
: Door locked indicator. Once the
machine has started, this indicator is
lighted on. When the programme has
finished, this indicator disappears.
• Indicator on: you cannot open the
appliance door.
• Indicator off: you can open the
door.
H. Option indicators:
a.
b.
I.
D.
: Clock indicator. After the
programme has started, the
programme duration is displayed and
the clock icon is animated.
E. The time area:
•
•
: Programme duration. After
you set a programme, the
duration is displayed in hours and
minutes. After the programme has
started, the time remaining is
updated every minute.
: Alarm codes. The
integrated red light of Start/Pause
button flashes.
•
: Error message. In the
event of operating problems,
some alarm codes can be
displayed (see «Troubleshooting»
chapter).
: The programme is
completed.
F. Soil degree indicators (see
paragraph «Time Manager»).
•
•
: Spin indicator. During the
spinning phase the spiral is
animated.
•
: No spin indicator. This option
eliminates all the spin phases and
increases the number of rinses for
some programmes.
•
: Rinse Hold indicator. The
water of the last rinse is not
emptied out to prevent the fabrics
from creasing.
•
: Night Cycle indicator. The
machine will not drain the water of
the last rinse, so as not to wrinkle
the laundry. As all spinning
phases are suppressed, this
washing cycle is very noiseless. It
can be set at night or in times with
a more economical power rate.
On some programmes the rinses
will be performed with more
water.
: Spin speed value.
J.
K. Temperature indicators:
•
: Temperature indicator.
During the washing cycle this
indicator is animated to show that
the appliance has started the
heating phase in the tub.
•
: Cold water indicator. The
appliance perform a washing
cycle with cold water.
: Intensive
: Normal / Daily
: Light / Quick
: Super Quick
G.
: Child lock indicator (see
«Settings» chapter)
: Easy Iron
: Sensitive (if available).
c.
Spin indicators:
: Delay start value
•
: Extra Rinse
L.
: Temperature value
ENGLISH
9
5. PROGRAMMES
5.1 Programme Chart
Programme
Temperature range
Cottons
90°C -
(Cold)
+
Cottons + Prewash
90°C -
(Cold)
Synthetics
60°C -
(Cold)
+
Synthetics + Prewash
60°C -
(Cold)
Delicates
40°C Spin
(Cold)
Maximum load Programme description
Reduced load1) (Type of load and soil level)
Maximum spin
speed
7 kg
3.5 kg
1400 rpm
White cotton and coloured cotton.
Normal, heavy and light soil.
7 kg
3.5 kg
1400 rpm
White cotton and coloured cotton.
Heavy soil and normal soil.
3 kg
1.5 kg
900 rpm
Synthetic items or mixed fabric
items. Normal soil.
3 kg
1.5 kg
900 rpm
Synthetic items or mixed fabric
items. Heavy soil and normal soil.
3 kg
1.5 kg
700 rpm
Delicate fabrics such as acrylics,
viscose and mixed fabrics requir‐
ing gentler washing. Normal soil.
7 kg
1400 rpm
To spin the laundry and to drain the
water in the drum. All fabrics, ex‐
cept woollens and delicate fab‐
rics.
7 kg
To drain the water in the drum. All
fabrics.
7 kg
1400 rpm
To rinse and spin the laundry. All
fabrics, except woollens and very
delicate fabrics. Reduce the spin
speed accordingly to the type of
laundry.
3 kg
900 rpm
Special programme for cotton, syn‐
thetic and mixed fabrics lightly
soiled. Select this programme to re‐
duce the energy consumption. Make
sure that the detergent is suitable
for low temperatures in order to
have good washing results2).
Drain
Rinse
(Cold)
Mix 20°
20°C
10
www.electrolux.com
Programme
Temperature range
Maximum load Programme description
Reduced load1) (Type of load and soil level)
Maximum spin
speed
1 kg
700 rpm
Special programme for silk and
mixed synthetic items.
2 kg
1000 rpm
Machine washable wool, hand
washable wool and other fabrics
with «hand washing» care symbol3).
2 kg
1000 rpm
Machine washable wool, hand
washable wool and other fabrics
with «hand washing» care symbol3).
ECO +
90°C - 40°C
7 kg
1400 rpm
White cotton and fast-coloured
cotton. Normal soil with stains. The
energy consumption decreases and
the time of the washing programme
is extended.
ECO
7 kg
1400 rpm
White cotton and fast-coloured
cotton. Normal soil. The energy
consumption decreases and the
time of the washing programme is
extended, ensuring good washing
results.
Silk
30°C -
(Cold)
Handwash
40°C -
(Cold)
Wool
40°C -
(Cold)
4)
90°C - 40°C
1) If you select the Super Quick, Refresh and Super Refresh option by pressing buttons
Time Manager, we recommend that you reduce the maximum load as indicated in the pro‐
grammes for cottons, synthetics and delicates. Full loading is possible however with some‐
what reduced cleaning results.
2) The appliance performs the short heating phase if the water temperature is below 20°C.
The appliance can show the temperature setting as “cold”.
3) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the
drum doesn't rotate or doesn't rotate properly, but this is normal for this programme.
4) Standard programmes for the Energy Label consumption values. According to regu‐
lation 1061/2010, these programmes with temperature selected 60°C and with temperature
selected 40°C are respectively the «Standard 60°C cotton programme» and the «Standard
40°C cotton programme». They are the most efficient programmes in terms of combined en‐
ergy and water consumption for washing normally soiled cotton laundry.
The water temperature of the washing phase may differ from the temperature
declared for the selected programme.
Programme options compatibility
Programme
■
■
■
■
■
■
■
■
ENGLISH
11
Programme
+
+
1)
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
ECO +
■
■
■
■
■
■
■
ECO
■
■
■
■
■
■
■
1) Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set
the No Spin option then only the drain phase is available.
6. CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant stand‐
ards. Different causes can change the data: the quantity and type of
laundry and ambient temperature. Water pressure, the supply voltage
and the temperature of inlet water may also affect the washing pro‐
gramme duration.
Technical specifications may be changed without prior notice to improve
the quality of product.
Programmes
Load
(kg)
Cottons 60°C
7
Energy
consump‐
tion (kWh)
1.2
Water con‐ Approxi‐
sumption
mate pro‐
(litre)
gramme
duration
(minutes)
53
140
Remaining
moisture
(%)1)
52
12
www.electrolux.com
Programmes
Load
(kg)
Energy
consump‐
tion (kWh)
Water con‐ Approxi‐
sumption
mate pro‐
(litre)
gramme
duration
(minutes)
Remaining
moisture
(%)1)
Cottons 40°C
7
0.7
53
130
52
Synthetics 40°C
3
0.50
40
80
35
Delicates 40°C
3
0.55
55
65
35
Wool 30°C 2)
2
0.25
58
50
30
7
0.84
46
191
52
3.5
0.77
36
172
52
3.5
0.50
38
160
52
Standard cotton programmes
Standard 60°C
cotton
Standard 60°C
cotton
Standard 40°C
cotton
1) At the end of spin phase.
2) Not available for some models.
Off Mode (W)
Left On Mode (W)
0.10
0.98
The information given in the chart above is compliant with the EU Commission regu‐
lation 1015/2010 implementing directive 2009/125/EC .
7. OPTIONS
7.1 Programme knob
This knob allows you to select a
programme, to reset a programme and/or
to switch the appliance on/off .
The knob can be turned either clockwise
or counterclockwise.
At the end of the programme, turn the
knob to position
appliance.
to deactivate the
7.2 Temperature
Press this button to increase or decrease
the default washing temperature.
If you set the position , the appliance
performs the washing with cold water.
The indicator and the value of the set
temperature stay on.
7.3 Spin
Press this button to increase or decrease
the default spin speed of the selected
programme or to select the additional
option. During the spinning phase the
spiral is animated.
With button you can set also set:
No Spin function
•
Set this option to remove all spin
phases.
ENGLISH
•
•
Set it for extremely delicate fabrics.
The rinse phase uses more water for
some washing programmes.
Night Cycle function
•
•
•
•
•
Set this option to remove all spin
phases and to perform a silent
washing.
The rinse phase uses more water for
some washing programmes.
The related indicator comes on.
The washing programme stops with
the water in the drum. The drum turns
regularly to prevent the laundry
creases.
The door stays locked. You must
drain the water to unlock the door.
Rinse Hold function
•
•
•
Set this option to prevent the laundry
creases.
The related indicator comes on.
There is a water in the drum when the
programme is completed.
The drum turns regularly to prevent
the laundry creases.
The door stays locked. You must
drain the water to unlock the door.
13
7.6 Delay Start
Press this button to delay the start of the
programme by 30 min - 60 min - 90 min,
2 hours and then by 1 hour up to a
maximum of 20 hour.
The button indicator illuminates. The
display shows the selected delay value.
7.7 Time Manager
Press this button to increase or decrease
the programme duration proposed by the
appliance. The indicator of the chosen
degree will appear on the display.
This option is available only with Cottons,
Synthetics and Delicate programmes.
Washing
cycle
Soil
level
Type of fabrics
Intensive
Heavy soiled
items
Normal
Normal soiled
items
Daily
Daily soiled items
Light
Slightly soiled
items
7.4 Easy Iron
Quick
Very slightly soiled
items
The appliance carefully washes and
spins the laundry to prevent the creases.
Super
Quick1)
Items used or
worn for a short
time
•
•
To drain the water refer to
‘At the end of the
programme’.
The appliance decreases the spin speed,
uses more water and adapts the
programme duration to the type of
laundry.
1) It is recommended to reduce the load
sizes.
The related indicator comes on.
The Time Manager cannot
be selected with the
7.5 Extra Rinse
programmes ECO
Press this button to add some rinses to
the washing programme.
The availability of the soil
degree changes according
to the type of fabric and
temperature.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
.
7.8 Start/Pause
Press this button to start or to interrupt
the selected programme.
14
www.electrolux.com
8. SETTINGS
8.1 Acoustic signals
•
The acoustic signals sound when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press button
and button
press
and
at the same time
until the indicator
comes on/goes
off in the display.
You can activate this option in two ways:
•
at the same time for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
To activate/deactivate this function,
•
After you press Start/Pause: the
options and the programme knob are
locked.
Before you press Start/Pause : the
appliance cannot start.
8.2 Child Lock function
With this function you can leave the
appliance unattended and prevent that
the children play with the control panel.
9. BEFORE FIRST USE
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put a small quantity of detergent in
the compartment for washing phase.
4. Set and start a programme for cotton
at the highest temperature without
laundry.
10. DAILY USE
10.1 Loading the laundry
1. Open the appliance door
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
This removes all possible dirt from the
drum and the tub.
ENGLISH
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
10.2 Using detergent and
additives
1. Measure out the detergent and the
fabric conditioner.
2. Carefully close the detergent drawer
15
Compartment for liquid addi‐
tives (fabric conditioner,
starch).
10.4 Switching the appliance on
and setting a programme
1. Turn the programme knob to switch
the appliance on and to set the
required programme:
• The display shows the default
value of temperature and spin, the
default level of Time Manager, the
programme duration and the
programme phases indicators of
the selected programme.
• The indicator of Start/Pause
button flashes in green.
2. If necessary, change the
temperature, the spin speed, the
level of soil, the cycle duration or add
available options. When you activate
an option, the related indicator
appears on the display.
If you set something not
compatible with the selected
programme, the display
shows the message
.
The Start/Pause button
indicator flashes in red 3
times.
10.3 Detergent compartments
CAUTION!
Use only specified
detergents for washing
machine.
Always obey the instructions
that you find on the
packaging of the detergent
products.
Detergent compartment for pre‐
wash phase.
Detergent compartment for
washing phase.
10.5 Starting a programme with
the delay start
1. Press the Delay Start button
repeatedly until the display shows the
delay you want to set. The related
indicator illuminates.
The selected delay time value (up to 20
hours) will appear on the display a few
seconds, then the duration of the
programme will appear again.
2. Press the Start/Pause button.
• The door is locked and the
•
•
indicator
is on.
The appliance starts the
countdown.
When the countdown is
completed, the programme starts
automatically.
16
www.electrolux.com
You can cancel or change
the set of the Delay Start
before you press the Start/
Pause button. After pressing
the Start/Pause button you
can only cancel the Delay
Start.
To cancel the Delay Start:
a. Press the Start/Pause button to
set the appliance to pause. The
related indicator flashes.
b. Press the Delay Start button until
the display shows .
Press the Start/Pause button
again to start the programme
immediately.
The Delay Start can
not be selected with
the draining
programme.
10.6 Starting a programme
without the delay start
Press the Start/Pause button.
• The green Start/Pause indicator
stops flashing and stays on.
• The programme starts, the door
•
locks, the indicator
illuminates and stays on in the
display.
In the display only the indicator of
the phase in operation flashes.
The programme time value
decreases with steps of one
minute.
The drain pump can operate
for a short time at the
beginning of the washing
cycle.
10.7 Interrupting a programme
and changing the options
You can change only some options
before the programme carries them out.
1. Press the Start/Pause button to
interrupt the running programme.
The related indicator flashes.
2. Change the options (if you wish to
change the Time Manager option,
you must cancel the running
programme and make your selection
again).
3. Press the Start/Pause button again.
The programme continues.
10.8 Cancelling a running
programme
1. Turn the programme knob to
position to cancel the programme.
The appliance is deactivated.
2. Now, you can set a new washing
programme and the available
options.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment; if
not, fill the detergent again.
10.9 Opening the door
While a programme is running or during
the Delay Start, the appliance door is
locked. The indicator
is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high and the drum still
rotates, you cannot open the
door.
To open the door during the first minutes
of the cycle or when the Delay Start
operates:
1. Press the Start/Pause button to
pause the appliance.
2. Wait until the indicator
goes off.
3. You can open the door.
4. Close the door and press the Start/
Pause button again.
The programme (or the Delay Start)
continues.
ENGLISH
10.10 At the end of the
programme
•
•
The appliance stops automatically.
Some acoustic signals sound (if they
are activated).
•
come
In the display the value
on. The Start/Pause indicator goes
off.
•
When the door lock indicator
goes off, you can open the door.
Remove the laundry from the
appliance. Make sure that the drum is
empty. Close the water tap.
•
•
Turn the programme knob to
position to deactivate the appliance.
• Keep the door ajar, to prevent the
mildew and odours.
The washing programme is
completed, but there is water in the
drum:
• The drum turns regularly to prevent
the creases in the laundry.
•
The door lock indicator
door stays locked.
is on. The
17
You must drain the water to open the
door.
To drain the water:
1. Turn the programme knob to
position an then select a spinning or
draining programme.
2. Press the Start/Pause button. If
necessary, decrease the spin speed.
The appliance spins and drains or only
drains.
3. When the programme is completed
and the indicator
can open the door.
goes off, you
4. Turn the programme knob to
position to deactivate the appliance.
10.11 Stand-by
Once the programme has finished, after
a few minutes the energy saving system
will be enabled.
The brightness of the display is reduced.
By pressing any button the appliance will
come out of the energy saving status.
11. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
11.1 The laundry load
•
•
•
•
•
•
•
•
Divide the laundry in: white, coloured,
synthetics, delicates and wool.
Obey the washing instructions that
are on the laundry care labels.
Do not wash white and coloured items
together.
Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first times.
Button up pillowcases, close zippers,
hooks and poppers. Tie up belts.
Empty the pockets and unfold the
items.
Turn multilayered fabrics, wool and
items with painted illustrations inside
out.
Remove hard stains with a special
detergent.
•
•
•
•
Wash and pre-treat heavy soil stains
before putting items in drum
Be careful with the curtains. Remove
the hooks and put the curtains in a
washing bag or pillowcase.
Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights, etc. ).
A very small load can cause balance
problems with the spin phase. If this
occurs, adjust manually the items in
the tub and start the spin phase
again.
11.2 Stubborn stains
For some stains, water and detergent is
not sufficient.
We recommend that you pre-treat these
stains before you put the items in the
appliance.
Special stain removers are available.
Use the special stain remover that is
applicable to the type of stain and fabric.
18
www.electrolux.com
11.3 Detergents and additives
•
•
•
•
•
•
Only use detergents and additives
specially made for washing machines:
– powder detergents for all types of
fabric,
– powder detergents for delicate
fabrics (40 °C max) and woollens,
– liquid detergents, preferably for
low temperature wash
programmes (60 °C max) for all
types of fabric, or special for
woollens only.
Do not mix different types of
detergents.
To help the environment, do not use
more than the correct quantity of
detergent.
Obey the instructions that you find on
the on packaging of these products.
Use the correct products for the type
and colour of the fabric, the
programme temperature and the level
of soil.
If your appliance does not have the
detergent dispenser with the flap
device, add the liquid detergents with
a dosing ball (supplied by the
detergent's manufacturer).
•
•
•
Always start a washing programme
with the maximum load of laundry
allowed.
If necessary, use a stain remover
when you set a programme with a low
temperature.
To use the correct quantity of
detergent, check the water hardness
of your domestic system. Refer to
"Water hardness".
11.5 Water hardness
If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.
To know the water hardness in your
area, contact your local water authority.
Use the correct quantity of the water
softener. Obey the instructions that you
find on the packaging of the product.
11.4 Ecological hints
•
Set a programme without the prewash
phase to wash laundry with normal
soil.
12. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
12.1 External cleaning
Clean the appliance with soap and warm
water only. Fully dry all the surfaces.
CAUTION!
Do not use alcohol, solvents
or chemical products.
12.2 Descaling
If the water hardness in your area is high
or moderate, we recommend that you
use a water descaling product for
washing machines.
Regularly examine the drum to prevent
limescale and rust particles.
To remove rust particles use only special
products for washing machines. Do this
separately from the laundry wash.
Always obey the instructions
that you find on the
packaging of the product.
12.3 Maintenance wash
With the low temperature programmes it
is possible that some detergent stays in
the drum. Perform a maintenance wash
regularly. To do this:
•
Remove all laundry from the drum.
ENGLISH
•
Select the cotton programme with the
highest temperature with a small
quantity of detergent.
12.4 Door seal
12.5 Cleaning the detergent dispenser
1.
2.
1
MAX
MAX
2
3.
4.
MAX
12.6 Cleaning the drain filter
The pump should be inspected regularly
and particularly if:
•
•
The appliance does not empty and/or
spin.
The appliance makes an unusual
noise during draining due to objects
19
Regularly examine the seal and remove
all objects from the inner part.
•
such as safety pins, coins etc.
blocking the pump.
A problem with water draining is
detected (see chapter
“Troubleshooting” for more details).
20
www.electrolux.com
WARNING!
Before unscrewing the pump
cover, switch the appliance
off and remove the mains
plug from the socket.
1. Unplug the appliance.
2. If it is necessary, wait until the water
has cooled down
To clean the drain filter:
WARNING!
When the appliance is in use
and depending on the
programme selected there
can be hot water in the filter.
Never remove the filter cover
during a wash cycle, always
wait until the appliance has
finished the cycle, and is
empty. When refitting the
filter cover, ensure it is
securely re-tightened so as
to stop leaks and young
children being able to
remove it.
A
B
3. Place a container close to the pump to
collect any spillage.
A = Cover filter.
B = Emergency emptying hose.
4. Release the emergency emptying hose,
place it in the container and remove its cap
cover.
1
2
5. When no more water comes out, unscrew
the filter cover by turning it anti-clockwise and
remove the filter. Use pliers, if necessary.
Always keep a rag nearby to dry up any water
spillages when removing the cover. Clean the
filter under a tap, to remove any traces of
fluff.
ENGLISH
21
6. Remove foreign bodies and fluff from the
filter seat and from the filter impeller.
7. Check carefully whether the pump impeller
rotates (it rotates jerkily). If it doesn’t rotate,
please contact your Service Centre.
2
8. Put the cap back on the emergency
emptying hose and place the latter back in its
seat. Replace the filter into the pump by
inserting it correctly into the special guides.
Screw the filter cover firmly by turning it
clockwise.
1
12.7 Cleaning the inlet hose and the valve filter
1.
2.
1
2
3
22
www.electrolux.com
3.
4.
45°
20°
12.8 Frost precautions
12.9 Emergency emptying out
If the appliance is installed in an area
where the temperature can be less than
0° C, remove the remaining water from
the inlet hose and the drain pump.
If the appliance does not drain the water,
proceed as follows:
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Place the end of the emergency
emptying hose and that of the inlet
hose in a bowl placed on the floor
and let water flow out of the hoses.
4. Set the Drain programme and let it
operate until the end of the cycle.
to
5. Turn the programme knob to
disconnect the appliance from the
power supply.
6. Screw the water inlet hose back on
and re-fit the emergency emptying
hose after having put the cap on
again.
WARNING!
Make sure that the
temperature is more than 0
°C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. If necessary, wait until the water has
cooled down.
4. Place a bowl on the floor and put the
end of the emergency emptying hose
into the bowl. Remove its cap.
The water should drain by gravity into the
bowl.
5. When the bowl is full, put the cap
back on the emergency hose.
6. Empty the bowl. Repeat the
procedure until water stops flowing
out.
7. Clean the pump if necessary as
previously described.
8. Replace the emergency emptying
hose in its seat after having plugged
it.
9. Screw the water inlet hose back on.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 Introduction
The appliance does not start or it stops
during operation.
ENGLISH
23
First try to find a solution to the problem
(refer to the table). If the problem
persists, contact the Authorised Service
Centre.
•
- The appliance does not drain
the water.
•
With some problems, the acoustic
signals operate and the display shows
an alarm code:
- The appliance door is open or
not closed correctly. Please check the
door!
•
- The mains supply is unstable.
Wait until the mains supply is stable.
•
- The appliance does not fill with
water properly. Start the appliance
again by pressing Start/Pause button.
After 10 seconds the door will be
unlocked.
WARNING!
Deactivate the appliance
before you do the checks.
13.2 Possible failures
Problem
Possible cause/solution
The programme does
not start.
Make sure that the mains plug is connected to the mains
socket.
Make sure that the appliance door is closed.
Make sure that there is not a damaged fuse in the fuse box.
Make sure that the Start/Pause has been pressed.
If the delay start is set, cancel the setting or wait for the end
of countdown.
Deactivate the Child Lock function if it is on (if available).
The appliance does not Make sure that the water tap is open.
fill with water properly.
Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter of the inlet hose and the filter of the
valve are not clogged. Refer to “Care and cleaning”.
Make sure that the inlet hose has no kinks or bends.
Make sure that the connection of the water inlet hose is cor‐
rect.
Make sure that the drain hose is in the correct position. The
hose may be too low.
24
www.electrolux.com
Problem
Possible cause/solution
The appliance does not Make sure that the sink spigot is not clogged.
drain the water.
Make sure that the drain hose has no kinks or bends.
Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to 'Care and cleaning'.
Make sure that the connection of the drain hose is correct.
Set the drain programme if you set a programme without
drain phase.
Set the drain programme if you set an option which ends
with water in the tub.
The spin phase does
Set the spin programme.
not operate or the
washing cycle lasts lon‐ Make sure that the drain filter is not clogged. Clean the fil‐
ter, if necessary. Refer to 'Care and cleaning'.
ger than usually.
There is water on the
floor.
Adjust manually the items in the tub and start the spin
phase again. This problem may be caused by balance
problems.
Make sure that the couplings of the water hoses are tight
and there is not water leakages.
Make sure that the drain hose have no damages.
Make sure you use the correct detergent and the correct
quantity of it.
Make sure you have replaced the emergency emptying cap
into the filter
Make sure you have properly screwed the filter in after
cleaning.
You cannot open the
appliance door.
Make sure that the washing programme is finished.
The appliance makes
an unusual noise.
Make sure the levelling of the appliance is correct. Refer to
'Installation'.
Set the drain or the spin programme if there is water in the
drum.
Make sure that the packaging and/or the transit bolts are
removed. Refer to 'Installation'.
Add more laundry in the drum. The load may be too small.
The washing results
are not satisfactory.
Increase the detergent quantity or use a different detergent.
Use special products to remove the stubborn stains before
you wash the laundry.
Make sure that you set the correct temperature.
Decrease the laundry load.
ENGLISH
After the check, activate the appliance.
The programme continues from the point
of interruption.
If the problem occurs again, contact the
Authorised Service Centre.
25
If the display shows other alarm codes.
Deactivate and activate the appliance. If
the problem continues, contact the
Service.
14. INSTALLATION
14.1 Unpacking
WARNING!
Remove all the packaging and the transit bolts before installing the
appliance.
Use the gloves. Remove the external film. If
necessary, use a cutter.
Remove the cardboard top. Remove the
polystyrene packaging materials.
Remove the internal film.
26
www.electrolux.com
Open the door. Remove the polystyrene
piece from the door seal and all the items
from the drum.
Put one of the polystyrene packaging
elements on the floor behind the appliance.
Carefully put down the appliance with the rear
side on it. Make sure not to damage the
hoses.
Remove the polystyrene protection from the
bottom. Pull up the appliance in vertical
position.
1
2
Remove the polystyrene block fitted on the
door seal (if present). Pull out all items from
the drum.
ENGLISH
27
Remove the power supply cable and the drain
hose from the hose holders.
Remove the three bolts. Use the key supplied
with the appliance. Pull out the plastic
spacers.
Put the plastic caps in the holes. You can find
these caps in the user manual bag.
We recommend that you keep the packaging and the transit bolts for any
movements of the appliance.
14.2 Positioning and levelling
•
•
•
Install the appliance on a flat hard floor.
Make sure that air circulation around the
appliance is not impeded by carpets, rugs
etc.
Level the appliance by raising or lowering
the feet.
28
www.electrolux.com
•
The feet may be tight to adjust as they
incorporate a self locking nut, but the
appliance MUST be level and stable. If
necessary, check the setting with a spirit
level. Any necessary adjustment can be
made with a spanner. Accurate levelling
prevents vibration, noise and
displacement of the appliance during
operation.
•
After having levelled the appliance, tighten
the lock nuts.
WARNING!
Never place cardboard, wood or similar materials under the appliance to
compensate for any unevenness in the floor.
14.3 The inlet hose
•
•
45
20
O
Connect the hose to the back appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the correct
position.
O
•
Connect the water inlet hose to the cold
water tap with 3/4 thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
ENGLISH
29
Do not use an extension hose if the inlet hose is too short. Contact the
service centre for the replacement of the inlet hose.
14.4 Water-stop device
The inlet hose has a water stop device. This
device prevents water leaks in the hose
because of its natural ageing.
The red sector in the window «A» shows this
fault.
If this occur, close the water tap and contact
the service centre to replace the hose.
A
14.5 Water drainage
There are different procedures to connect the drain hose:
With the plastic hose guide.
•
Make a U shape with the drain hose.
On the edge of a sink
• Make sure that the plastic guide cannot
move when the appliance drains. Attach
the guide to the water tap or the wall.
30
www.electrolux.com
To a stand pipe with vent-hole
• Directly into a drain pipe at a height of not
less than 60 cm (23.6”) and not more than
100 cm (39.3”). Refer to the illustration.
• The end of the drain hose must always be
ventilated , i.e. the inner diameter of the
drain pipe (min. 38 mm - min. 1.5”) must
be larger than the external diameter of the
drain hose.
Drain hose end
• If the end of the drain hose looks like this
(see the picture), you can push it directly
into the stand pipe.
Without the plastic hose guide.
To a sink spigot
• Refer to the illustration. Put the drain hose
in the spigot and tighten it with a clip.
• Make sure that the drain hose makes a
loop to prevent particles going into the
appliance from the sink.
To a wall-pipe
• Directly to a built-in drain pipe in the room
wall and tighten it with a clip.
You can extend the drain hose to maximum 400 cm. Contact the service
centre for the other drain hose and the extension.
ENGLISH
31
14.6 Building in
This appliance has been designed to be built
into the kitchen furniture. The recess should
have the dimensions shown in this picture.
600 mm
min.
596 mm
560 mm
555 mm
min.
820 mm
818 mm
75 mm
60 mm
170 mm
100 mm
14.7 Preparation and assembly of the door
The appliance is originally pre set for the
assembly of a door opening from right to left.
16-22 mm
X
Ø 35 mm
416
mm
22±1,5 mm
14 mm
595-598 mm
Door
The dimensions of the door should be:
• width 595 - 598 mm
• thickness 16-22 mm
• the height X depends on the height of the
adjacent furniture's base.
32
www.electrolux.com
1
Hinges
To mount the hinges it is necessary to drill
two holes (dia. 35 mm, depth12.5-14 mm
depending on the depth of door furniture) on
the inner side of the door.
The distance between the hole fixing centres
must be 416 mm. The distance from upper
edge of the door to the centre of the hole
depends on the adjacent furniture's
dimensions.
The hinges will be fixed to the door by means
of screws for wood 1 and 2 supplied with the
appliance.
2
Mounting the door
WARNING!
Do not remove the screw B.
Fix the hinges to the appliance by means of
the M5x15 screws.
The hinges can be adjusted to compensate
for possible uneven thickness of the door.
To align the door perfectly it is necessary to
loosen the screw, adjust the door and tighten
the screw A again.
A
B
Counter-magnet
A
B
C
D
A
C
E
B
WARNING!
Do not remove the screw B.
The appliance is pre set for a magnetic door
closure. To position the closure correctly, it is
necessary to screw the counter-magnet A
(steel disk + rubber ring) into the inner side of
the door.
Its position must correspond to the magnet B
on the appliance.
WARNING!
Do not remove the screw B.
If the door has to be opened from left to right,
invert the position of the plates E, the magnet
D and the plate C. Mount the counter-magnet
D and the hinges A as previously described.
ENGLISH
15. TECHNICAL DATA
Dimension
Width/ Height/ Depth/
Total depth
596 mm/ 818 mm/ 544 mm/ 560
mm
Electrical connection
Voltage
Overall power
Fuse
Frequency
220-230 V
2000 W
10 A
Level of protection against ingress of solid parti‐ IPX4
cles and moisture ensured by the protective cov‐
er, except where the low voltage equipment has
no protection against moisture
Water supply pressure Minimum
Maximum
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
Water supply 1)
Cold water
Maximum Load
Cotton
7 kg
Energy Efficiency Class
Spin Speed
A+++
Maximum
1400 rpm
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
15.1 Additional technical data
Brand logo
ELECTROLUX
Name of the distributor
Electrolux Lehel Kft
1142 Budapest
Erzsébet kir.né útja 87
Model denomination
EWG 147540 W
Measure unit
Energy class
(on scale from A to D, where A most effective and D - least effec‐
tive)
A+++
Washing performance
(on scale from A to G, where A A
higher and G - lower performance)
Spin drying performance
(on scale from A to G, where A better and G - worse)
B
Residual humidity
%
52
Maximum spin speed
rpm
1400
Wash load
kg
7
Average annual energy1)
kWh
169
33
34
www.electrolux.com
Average annual water con‐
sumption
litres
8999
Washing noise on normal 60°
C cotton programme
dB/A
52
Spinning noise on normal 60°
C cotton programme
dB/A
73
1)
1) Complies with EN60456.
16. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
*
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
35
132924324-A-212018
www.electrolux.com/shop

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement