Electrolux EDV600 User Manual

USER MANUAL
Tumble Dryer EN
133356410
EDV600
Contents
Instructions
Operating Guide
Warranty
Important Safety Instructions
DRYER SAFETY
bottom
Do not use them for commercial or
any other purpose.
FIRE HAZARDS
5
6
7
Important Safety Instructions
CLEANING THE LINT FILTER
DRYING GUIDE
LINT BUILD-UP IS A FIRE HAZARD
Do not tumble dry
In model with temperature selector control, do not
use the “Full” setting for these fabrics. Always stretch
them out immediately after drying.
LINT FILTER
sleepwear, in model with temperature selector control
use only on the “Half” setting.
To remove the lint filter open
the door and press the two
pads together. Pull the lint
filter out of the pocket.
Open apart the lint filter and
wipe or peel off the lint.
“Airing”
Installation Instructions
unventilated room.
WORKTOP
TIME
CONTROL
KNOB
(Model with
temperature
selector)
INLETS
NAME BADGE
DOOR
SAFETY
SWITCH
BUTTON
TEMPERATURE
CONTROL
(Model with
temperature
selector)
OUTLET COVER
LEGS
(Model with
temperature
selector )
EXHAUST
GRILLE
REMOVABLE
EXHAUST GRILLE
venting kit (optional extra)
Name Badge
You can invert the name badge when you want to mount
your dryer upside down on the wall.
Use a suitable tool (such as a thin bladed tool).
Unclip the badge from the panel, invert and clip back.
Quick 5 Step Operating Guide
1.
Load your dryer loosely until it is no more than
TWO THIRDS FULL. Clothes must tumble freely
in a dryer. Don’t cram them in. Wet clothes fluff up
when dry.
Temperature Selector (model with temperature selector)
“Half” For delicate items which can shrink, such as
synthetics, underwear, etc.
“Full” For heavy, durable items such as towels and
flannelette sheets.
Do not load clothes or other articles which are dripping
wet into your dryer.
2.
Switch On
The dryer will not operate unless the safety button
on the door is fully pressed in.
DOOR SAFETY SWITCH
BUTTON
3.
Model with temperature selector, select one of
two (2) temperature settings.
TEMPERATURE CONTROL
(Model with temperature selector)
TIME CONTROL KNOB
Hints
4.
Select the drying time.
Only turn the time control
knob clockwise.
5.
Clean Lint Filter
After every load clean the lint filter located at the
front of your dryer to reduce drying times and avoid
overheating.
The drum is designed to rotate in each direction, clockwise
and anti-clockwise. This reduces tangling and gives more
even drying in a shorter time.
Hints (continued)
Troubleshooting
Instructions on
page 2 and 3.
6
7
8
9
www.electrolux.com