Electrolux ESL6201LO User Manual

Add to my manuals
20 Pages

advertisement

Electrolux ESL6201LO User Manual | Manualzz
ESL6201LO
................................................ .............................................
EN DISHWASHER
USER MANUAL
2
www.electrolux.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.RegisterElectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INSTRUCTIONS
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge use the appliance. They
must have supervision or instruction for
the operation of the appliance by a person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the
appliance door when it is open.
1.2 Installation
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Obey the installation instruction supplied with the appliance.
• Make sure that the appliance is installed
below and adjacent to safe structures.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the appliance power supply cable need to be replaced, this must be
carried out by our Service Centre.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Do not touch the mains cable or the
mains plug with wet hands.
• Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS
1362) fuse.
• This appliance complies with the E.E.C.
Directives.
Water connection
• Make sure not to cause damage to the
water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
• The water inlet hose has a safety valve
and a sheath with an inner mains cable.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power supply. If not, contact an electrician.
WARNING!
Dangerous voltage.
4
www.electrolux.com
• If the water inlet hose is damaged, immediately disconnect the mains plug
from the mains socket. Contact the
Service to replace the water inlet hose.
1.3 Use
• This appliance is intended to be used in
household and similar applications such
as:
– Staff kitchen areas in shops, offices
and other working environments
– Farm houses
– By clients in hotels, motels and other
residential type environments
– Bed and breakfast type environments.
WARNING!
Risk of injury, burns, electrical
shock or fire.
• Do not change the specification of this
appliance.
• Put knives and cutlery with sharp points
in the cutlery basket with the points
down or in a horizontal position.
• Do not keep the appliance door open
without supervision to prevent to fall on
it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous.
Obey the safety instructions on the detergent packaging.
• Do not drink and play with the water in
the appliance.
• Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the
dishes.
• The appliance can release hot steam if
you open the door while a programme
operates.
• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
• Do not use water spray and steam to
clean the appliance.
1.4 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
ENGLISH
2. PRODUCT DESCRIPTION
1
2
10
9
8
7
6
5
4
3
1 Upper spray arm
6 Rinse aid dispenser
2 Lower spray arm
3 Filters
7 Detergent dispenser
4 Rating plate
9 Lower basket
10 Upper basket
8 Cutlery basket
5 Salt container
3. CONTROL PANEL
1
2
5
4
3
1 On/off button
4 Program button
2 Programme indicators
3 Indicators
5 Delay button
Indicators
Description
End indicator.
Rinse aid indicator. It is always off while the programme operates.
5
6
www.electrolux.com
Indicators
Description
Salt indicator. It is always off while the programme operates.
4. PROGRAMMES
Programme
1)
2)
3)
4)
Degree of
soil
Type of load
Programme
phases
Duration
(min)
Energy
(kWh)
Water
(l)
Normal soil
Crockery and
cutlery
Prewash
Wash 50 °C
Rinses
Dry
195
1.02
11
Normal soil
Crockery and
cutlery
Prewash
Wash 65 °C
Rinses
Dry
100 110
1.2 - 1.6
15 - 16
Heavy soil
Crockery, cutlery, pots and
pans
Prewash
Wash 70 °C
Rinses
Dry
130 150
1.3 - 1.4
13 - 15
Fresh soil
Crockery and
cutlery
Wash 60 °C
Rinse
30
0.8
9
All
Prewash
14
0.1
4
1) The pressure and the temperature of the water , the variations of the mains supply, the
options and the quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
[email protected]
Write down the product number (PNC) that is on the rating plate.
ENGLISH
7
5. OPTIONS
5.1 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction and it is not
possible to deactivate them.
There is also an acoustic signal that operates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold Program until the prostarts to
gramme indicator
flash and the programme indicator
comes on with fixed light.
4. Press immediately Program.
• The programme indicator
comes on with fixed light.
•
The programme indicator
starts to flash.
5. Wait until the programme indicator
goes off. The programme indicator
continues to flash.
6. Press Program. The end indicator
comes on. The acoustic signal for the
end of programme is activated.
7. Press the on/off button to deactivate
the appliance and to confirm the setting.
How to deactivate again the acoustic
signal for the end of programme
1. Refer to “How to activate the acoustic
signal for the end of programme” and
follow the procedure from step (1) to
step (5). The end indicator is on.
2. Press Program. The end indicator
goes off. The acoustic signal for the
end of programme is deactivated.
3. Press the on/off button to deactivate
the appliance and to confirm the setting.
6. BEFORE FIRST USE
1. Make sure that the set level of the water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to remove them. Do not use detergent and
do not load the baskets.
6.1 Adjusting the water softener
Water softener
adjustment
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Level
47 - 50
84 - 90
8.4. - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
8
www.electrolux.com
Water softener
adjustment
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Level
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5 1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
<4
<7
< 0.7
<5
12)
1) Factory position.
2) Do not use salt at this level.
6.2 How to adjust the level of
the water softener
1. Press the on/off button to activate the
appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”.
2. Press and hold Program until the prostarts to
gramme indicator
flash and the programme indicator
comes on with fixed light.
3. Wait until the programme indicator
goes off and the end indicator
starts to flash. The programme indicacontinues to flash.
tor
4. Press Program. The end indicator
starts to flash. The intermittent flashing
of the end indicator refers to the current set level.
• E.g. 5 flashes + pause + 5 flashes =
level 5.
5. Press Program again and again to
change the setting. Each time you
press Program the level number increases.
6. Press the on/off button to deactivate
the appliance and to confirm the setting.
ENGLISH
9
6.3 Filling the salt container
1.
2.
3.
4.
5.
Turn the cap counterclockwise and
open the salt container.
Put 1 litre of water in the salt container (only for the first time).
Fill the salt container with dishwasher
salt.
Remove the salt around the opening
of the salt container.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
6.4 Filling the rinse aid dispenser
A D
1.
B
2.
3.
4.
C
You can turn the selector of the
released quantity (B) between position 1 (lowest quantity) and position 4 or 6 (highest quantity).
B
A
M AX
4
3 2
1
+
Press the release button (D) to open
the lid (C).
Fill the rinse aid dispenser (A), no
more than the mark 'max'.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
Close the lid. Make sure that the release button locks into position.
-
C
D
10 www.electrolux.com
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
7.1 Using the detergent
1.
D A B
2.
30
3.
20
4.
C
A
30
B
5.
Press the release button (B) to open
the lid (C).
Put the detergent in the compartment
(A) .
If the programme has a prewash
phase, put a small quantity of detergent in the compartment (D).
If you use detergent tablets, put the
tablet in the compartment (A).
Close the lid. Make sure that the release button locks into position.
D
20
32
-
1
4
MAX
+
C
7.2 Using the combi detergent
tablets
When you use tablets, that contain salt
and rinse aid, do not fill the salt container
and the rinse aid dispenser. The rinse aid
indicator always comes on if the rinse aid
dispenser is empty.
1. Adjust the water softener to the lowest
level.
2. Set the rinse aid dispenser to the lowest position.
If you stop to use the combi
detergent tablets, before you
start to use separately
detergent, rinse aid and
dishwasher salt, do these steps:
1. Press the on/off button to activate the
appliance.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
ENGLISH
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.
11
Cancelling the delay start while
the countdown operates
7.3 Setting and starting a
programme
When you cancel the delay start you have
to set the programme and options again.
1. Press and hold Program until all the
programme indicators come on and
the end indicator flashes.
Reset function
Cancelling the programme
For some settings it is necessary that the
appliance is in user mode.
The appliance is in user mode when all
the programme indicators are on.
To set the appliance in user mode, do the
Reset function
1. Press and hold the programme button
until all the programme indicators
come on.
Do the Reset function.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Press Program again and again until
only the indicator of the programme
you want to set is on.
4. Close the appliance door. The programme starts.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay to delay the start of the
programme of 3 hours.
• The Delay indicator comes on.
3. Close the appliance door. The countdown starts.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
The end indicator comes on.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
If you do not press the on/off button, the AUTO OFF function automatically deactivates the appliance a few minutes after the end
of the programme.
This helps to decrease the energy
consumption,
Important
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
12 www.electrolux.com
8. HINTS AND TIPS
8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water softener clean and in good conditions. It is
important to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dishwasher salt and water.
8.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
• The rinse aid helps, during the last rinsing phase, to dry the dishes without
streaks and stains.
• Combi detergent tablets contain detergent, rinse aid and other added agents.
Be sure that these tablets are applicable to the water hardness in your area.
Refer to the instructions on the packaging of the products.
• Detergent tablets do not fully dissolve
with short programmes. To prevent detergent residues on the tableware, we
recommend that you use the tablets
with long programmes.
Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent
packaging.
8.3 Loading the baskets
Refer to the supplied leaflet with
examples of the load of the baskets.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items made
of wood, horn, aluminium, pewter and
copper.
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove remaining food from the items.
• To remove easily remaining burned
food, soak pots and pans in water before you put them in the appliance.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that cutlery and dishes do
not bond together. Mix spoons with
other cutlery.
• Make sure that glasses do not touch
other glasses.
• Put the small items in the cutlery basket.
• Put the light items in the upper basket.
Make sure that they do not move.
• Make sure that the spray arms can
move freely before you start a programme.
8.4 Before starting a
programme
Make sure that:
• The filters are clean and correctly installed.
• The spray arms are not clogged.
• The position of the items in the baskets
is correct.
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
• The cap of the salt container is tight.
ENGLISH
13
9. CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.
Dirty filters and clogged spray
arms decrease the washing results.
Make a check regularly and, if
necessary, clean them.
9.1 Cleaning the filters
1.
Turn the filter (A) counterclockwise
and remove it.
2.
To disassemble the filter (A), pull
apart (A1) and (A2).
Remove the filter (B).
Wash the filters with water.
Before you put the filter (B) back,
make sure that there are no residues
of food or soil in or around the edge
of the sump.
C
B
A
A1
3.
4.
5.
A2
6.
7.
Make sure that the filter (B) is correctly positioned under the 2 guides
(C).
Assemble the filter (A) and put it back
in filter (B). Turn it clockwise until it
locks.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
9.2 Cleaning the spray arms
9.3 External cleaning
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
14 www.electrolux.com
10. TROUBLESHOOTING
The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solution
to the problem.
With some problems, the end indicator flashes intermittently to show an
alarm code.
Alarm code
Problem
• The end indicator flashes 1 time intermittently.
• Acoustic signal sounds 1 time intermittently.
The appliance does not fill with water.
• The end indicator flashes 2 times intermittently.
• Acoustic signal sounds 2 times intermittently.
The appliance does not drain the water.
• The end indicator flashes 3 times intermittently.
• Acoustic signal sounds 3 times intermittently.
The anti-flood device is on.
WARNING!
Deactivate the appliance before
you do the checks.
Problem
Possible solution
You cannot activate the appliance.
Make sure that the mains plug is connected
to the mains socket.
Make sure that there is not a damaged fuse in
the fuse box.
The programme does not start.
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or
wait for the end of the countdown.
The appliance does not fill with
water.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not
clogged.
Make sure that the inlet hose has no kinks or
bends.
The appliance does not drain the
water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or
bends.
ENGLISH
15
Problem
Possible solution
The anti-flood device is on.
Close the water tap and contact the Service.
After the checks are completed, activate
the appliance. The programme continues
from the point of interruption.
If the problem occurs again, contact the
Service.
If other alarm codes appear, contact the
Service.
10.1 If the washing and drying
results are not satisfactory
• The quality of the detergent can be the
cause.
Dishes are wet
• The programme is without a drying
phase or with a low temperature drying
phase.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
Whitish streaks or bluish layers on
glasses and dishes
• The released quantity of rinse aid is too
much. Adjust the rinse aid selector to a
lower position.
• The quantity of detergent is too much.
Refer to ‘HINTS AND TIPS’ for
other possible causes.
Stains and dry water drops on
glasses and dishes
• The released quantity of rinse aid is not
sufficient. Adjust the rinse aid selector
to a higher position.
11. TECHNICAL INFORMATION
Dimensions
Width / Height / Depth (mm)
Electrical connection
Refer to the rating plate.
Voltage
Frequency
596 / 818 -898 / 555
220 - 240 V
50 Hz
Water supply pressure
Min. / max. (bar / MPa)
Water supply 1)
Cold water or hot water2)
(0.5 / 0.05 ) / (8 / 0.8 )
Capacity
Place settings
12
Power consumption
Left-on mode
0.50 W
Off-mode
0.50 W
max. 60 °C
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
16 www.electrolux.com
12. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
and electronic appliances. Do not dispose
appliances marked with the symbol
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
17
18 www.electrolux.com
ENGLISH
19
156972080-B-452013
www.electrolux.com/shop

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement