Aeg FCE User Manual
Add to my manuals
28 Pages
AEG FCE dishwasher offers various features to make dishwashing easier and more efficient. Its "IMPULSE WASHING" system varies pump revolutions and water pressure for intensive cleaning. With adjustable water softener settings, it adapts to different water conditions. The delay start option allows you to set the dishwasher to start at a desired time, while the remaining time indicator keeps you informed about the progress of the wash cycle. Additionally, indicator lamps display the current phase of the program and drying status.
advertisement
▼
Scroll to page 2
of 28
english AEG Favorit CE 3-09-30 08.38 Sidan 1 Favorit CE Dishwasher Aus Erfahrung Gut Instruction book english AEG Favorit CE 3-09-30 08.38 Sidan 2 Dear customer, please read these user instructions carefully. Please observe the safety instructons on the first few pages of this Instruction book. Save these instructions and make sure they remain with the dishwasher if it is moved or sold, so that everyone using it through its life can be properly informed on appliance use and safety. The warning triangle and/or specific words (Warning!, Caution!, Important!) are used to highlight instructions that are important for your safety or for the function of the appliance. It is imperative that these instructions are observed. This symbol or numbered instruction steps lead you step by step through the operation of the appliance. Next to this symbol you receive additional information and practical tips on using the appliance. Tips and instructions for the economical and environmentally friendly use of the appliance are marked with a clover leaf. In the event of a malfunction, these operating instructions contain information on how to rectify faults yourself, see the section ”In the event of a fault”. If these instructions ar insufficient, please contact your Service Centre. This dishwasher has a new feature called ”IMPULSE WASHING”. This washing system varies both the revolutions of the pump and the water pressure for more intensive cleaning of the dishes during a programme. That is why different sections of the programme cycle do not sounds the same. Printed on paper manufactured with environmentally sound processes. He who thinks ecologically acts accordingly... 2 english AEG Favorit CE 3-09-30 08.38 Sidan 3 Contents Contents Instruction book .................................................4-21 Safety information .............................................................4 Disposal ............................................................................6 General information...........................................................7 Description of the appliance..............................................8 Prior to using for the first time.........................................10 Programme chart ............................................................14 Loading the dishes..........................................................16 Using the appliance ........................................................17 Care and cleaning...........................................................19 In the event of a fault ......................................................20 Service....................................................................22 Service and spare parts ..................................................22 Position- and connection instructions...........23-27 Technical specifications...................................................23 Installation .......................................................................24 Information for test centres .............................................27 822 61 10-33 3 english AEG Favorit CE 3-09-30 08.38 Sidan 4 Instruction book Instruction book Safety information The safety aspects of AEG electrical appliances comply with accepted technical standards and the German Appliance Safety Law. Nevertheless, as a manufacturer we consider it our obligation to make you aware of the following safety information: General safety ● Only wash household dishes using the dishwasher. If the appliance is used for other purposes, or is used incorrectly, the manufacturer cannot accept any liability for any damage caused. ● Additions or modifications to the dishwasher are not permitted for safety reasons. Before using the dishwasher for the first time ● Check the dishwasher for transport damage. Never connect a damaged machine. In the case of damage, please contact your retailer. ● For information on how to correctly install and connect up your dishwasher, please read the ”Installation” section. ● Before installing the appliance, ensure that the nominal voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Child safety ● Remember that the plastic bags included in the packaging can be fatal playthings for small children. ● Children may not recognise the dangers of improper use of electrical appliances. You should therefore ensure proper supervision during operation and not allow children to play with the dishwasher. ● Detergents may have a caustic effect on eyes, mouth and throat and may even cause suffocation. Keep all detergents in a safe place out of children´s reach. ● The water in your dishwasher is not suitable for drinking. If there are still remnants of degergent in the appliance, there is a risk of burns. Keep children well away from the dishwasher when its door is open. 4 english AEG Favorit CE 3-09-30 08.38 Sidan 5 Instruction book In daily use Never place the dishwasher in operation if the mains cable, water inlet or drain hose is damaged, or the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible. ● In the event of a fault, first close the tap, then switch off the appliance and unplug it from the mains. If the appliance is permanently wired to the mains, remove the fuse. ● When removing the electrical plug, grip the plug, not the lead. ● Repairs to the dishwasher are only to be carried out by qualified service engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your local AEG Service Force Centre. Use only spare parts supplied by these. ● If the mains lead is damaged, or is to be replaced for a longer lead, the cable (obtainable from AEG Service Force) must be replaced by a service engineer authorised by AEG. ● Do not put any solvents in the dishwasher. There is a risk of an explosion! ● Do not sit or stand on the open door, the appliance may tip over. ● Before using special dishwasher salt, detergent or rinse aid, make sure that the manufacturer of these productrs expressly specifies their use in domestic dishwashers. ● The water safety system protects against water damages. The following requirements must be fulfilled: - The dishwasher must be electrically connected when it is shut off. - The dishwasher must be correctly installed. - Always shut off the water supply whenever the dishwasher is left unattended for an extended period. ● 5 english AEG Favorit CE 3-09-30 08.38 Sidan 6 Instruction book Disposal Disposing of the packaging material Caution! Never leave packaging material in a place where children may play with it. All materials used in packaging this appliance are environmentallyfriendly. The cardboard components of the packaging are made from recyclable paper and should be taken to a collection point for recycling. >PE< stands for polyethylene, which is used for the bag around the appliance and the bag in which these instructions were supplied. >PS< stands for polystyrene (moulded), which is used for the sections of packaging needed to cushion the appliance. The appliance contains plastic and rubber components. These have identifying marks to show what they are made from, so they can be recycled or disposed of properly at the end of the appliance's life cycle. The materials are identified according to international standards. Disposal of old appliances At the end of the appliance's useful life, disconnect the electrical plug from the power supply, then cut the electrical lead at the point where it enters the appliance. Make quite sure that children will not be able to play with it. 6 english AEG Favorit CE 3-09-30 08.38 Sidan 7 Instruction book General information Economical and ecological dishwashing Only connect the dishwasher to the hot water supply, if your hot water is not electrically heated. ● Ensure that the water softener is correctly adjusted. ● ● Do not pre-rinse dishes under running water. Select the wash programme to suit the nature and degree of the soiling on the dishes. ● Do not use more detergent, special salt or rinse aid than is recommended in this instruction booklet and by the detergent manufacturer. ● For washing in the dishwasher the following are not suitable: - wooden platters - plastic items that are not heat resistant - lead crystal glass - pewter or copper items - bonded cutlery items or dishes - older cutlery with cement that is not temperature resistant - cutlery with wooden, horn, china or mother of pearl handles For washing in the dishwasher the following are of limited suitability: - Only wash stoneware in the dishwasher if it is specifically marked as being dishwasher safe by the manufacturer. - Glazed patterns may fade if machine washed frequently. - Silver and aluminium parts have a tendency to discolour during washing. Left-overs, e.g. egg white, egg yolk and mustard often cause discolouring and staining on silver. Therefore always clean left-overs from silver immediately, if it is not to be washed straight after use. - Some types of glass can become dull after a large number of washes. Make sure you always buy articles that are dishwasher safe. 7 english AEG Favorit CE 3-09-30 08.38 Sidan 8 Instruction book Description of the appliance 4 1 2 3 4 5 6 8 Spray arm Coarse filter/microfilter Fine filter Detergent dispenser Rinse aid dispenser Salt container 5 english AEG Favorit CE 3-09-30 08.38 Sidan 9 Instruction book The control panel Indicator and control lamps Indicator lamps delayed start On/Off button Water softener button Control lamp Functions button Delay start button Programme buttons Water softener and functions button: In addition to selecting a programme, you can press these two buttons to adjust the setting of the water softener. Indicator lamps: Shows • Current phase of the selected programme. • Wash cycle in progress top lamp • Drying in progress middle lamp • Programme cycle ended lowest lamp Control lamps: Shows that • On/Off button is pushed in • Refilling of salt is necessary • Refilling of the rinse aid is necessary 9 english AEG Favorit CE 3-09-30 08.38 Sidan 10 Instruction book Prior to using for the first time Adjusting the water softener To prevent limescaling on the dishes and to the interior of the dishwasher, the dishes must be washed with soft i.e. water with low lime content. This dishwasher is equipped with a water softener, where tapwater which is harder then 4°d (german degree) is descaled with special salt. Adjust the water softener according to the table below for the water hardness level for your area. Contact your local Water Authority to find the exact water hardness level for your area. The water softener has 5 settings: °d Water hardness mmol/l 1) > 24 18 - 24 12 - 18 4 - 12 below 4 2) > 4,2 3,2 - 4,2 2,1 - 3,2 0,7 - 2,1 below 0,7 Setting on the water softener Number of light flashes 5 4 3* 2 1 no salt is needed 5 4 3 2 1 1) german degree of measurement for the water hardness 2) millimol, internationel unit for water hardness *) factory setting The dishwasher must be switched off. 1. Press the water softener and functions buttons simultaneously and hold them pressed in, then also press in the On/Off button. 2. When the lamps for the water softener and functions buttons starts to flash, you can let go of the buttons. 3. Press the water softener button once. At first the lamp will be solid, then it starts to flash. - The number of flashes are equivalent with the set water hardness level. - This sequence of flashes is repeated several times after a few seconds pause. 4. The water hardness level is raised by 1 step every time you press the water softener button. After hardness level 5 comes hardness level 1. 5. Once the hardness setting is set correctly, press the On/Off button. If the setting 1 is chosen, the salt indicator lamp is not lit. 10 english AEG Favorit CE 3-09-30 08.38 Sidan 11 Instruction book Filling with salt for the water softener Caution! Use only salt designed for dishwashers. Never fill the salt container with any another type of salt or dishwasher detergent as this would irreparably damage the water softener. Prior to filling with salt, please check each time that you really do have a packet of dishwasher salt in your hand. 1. Unscrew the filler cap to the salt container anticlockwise. 2. Fill the salt container with water (only the first time). 3. Fill the container with coarse salt, using the funnel supplied. 4. Remove the funnel and wipe off any spillage around the filler opening. 5. Screw the filler cap back properly in place. Fill with dishwasher salt: When the indicator light on the control panel is lit. 11 english AEG Favorit CE 3-09-30 08.38 Sidan 12 Instruction book Filling the rinse aid Use of rinse aid will result in cleaner and faster drying of the load, since it helps water and soil to run off. Too much rinse aid may result in streakiness, too little may cause white spots. Caution! Only use rinse aid specifically designed for domestic dishwashers. Never fill the rinse aid dispenser with any other substance (e.g. vinegar concentrate or dishwasher detergent) as this would damage the appliance. The rinse aid dispenser is on the inside of the dishwasher door. 1. Open the lid to the dispenser by pressing the lid catch towards the compartment and lift the lid. 2. Fill up with rinse aid; do not overfill. Maximum inhold ca. 150 ml. 3. Wipe off any spillage carefully to prevent excessive foaming during the next wash programme. 4. Close the lid and press until it locks again. Fill with rinse aid: When the indicator light on the control panel is lit. If dishwasher detergent with rinse aid is used, you can switch off the lamp that indicates that the rinse aid dispenser is empty. The dishwasher must be switched off. 1. Press the water softener and functions buttons simultaneously and hold them pressed in, then also press in the On/Off button. 2. When the lamps for the water softener and functions buttons starts to flash, you can let go of the buttons. 3. Press the functions button once. The lamps for the functions button and ended programme cycle starts to flash. Press the button once more and the light for the ended programme cycle goes out. Now the function for the rinse aid control light is off. 4. Press out the On/Off button to complete the setting. To reset the function, follow steps 1 and 2 above and then press the functions button twice, until the lights for the functions button and for ended programme cycle begins to flash again. 12 english AEG Favorit CE 3-09-30 08.38 Sidan 13 Instruction book Adjusting rinse aid dosing The dispenser holds about 150 ml. This is enough for approx. 60 wash cycles, depending on the dosage setting. Adjust the dosage setting according to the hardness of the water. You can set the dosage between 1 - 6, equivalent to 1 - 6 ml rinse aid. Factory setting is 1. Begin at the lowest dosage setting and increase if necessary by turning the setting arrow with e.g. the handle of a spoon. Filling with detergent Caution! Only use detergents specially designed for dishwashers. The detergent is released into the wash water during the programme. Please observe the manufacturer’s dosing and storage recommendations as stated on the detergent packaging. 1. Open the lid to the dispenser by pressing the lid catch towards the compartment. 2. Filling with detergent. Pre-wash detergent is poured into the smaller compartment to the left when needed. 3. Close the lid. Avoid frequent use of liquid detergents, as the long term effects of such detergents create a potential risk of increasing pump noise. Detergent tablets Detergent tablets of different makes dissolve at different speeds. For this reason some detergent tablets cannot develop their full cleaning power during short programmes. Therefore please use normal programmes with pre-wash when using detergent tablets. 13 english AEG Favorit CE 3-09-30 08.38 Sidan 14 Instruction book Programme chart Type of dishes Type of soil: Suitable programme: 1) Washing time with drying: 2) Energy: Water: 2) 2) All types of dishes • heavily soiled • normaly soiled • dried-on food remnants especially eggwhite and starch • dried-on food remnants INTENSIV 70° Programmecycle: Drying time: Plates and cooking pots 2) NORMAL 65° Pre-wash Washing 2 x rinses Final rinse Drying Pre-rinse Washing Rinse Final rinse Drying 112 minutes 92 minutes 13 minutes 13 minutes 1,15 kWh 0,80 kWh 9 litres 7 litres 1) Noise levels vary at different stages of the wash programme as at some programme stages the dishes are washed more energetically so that they will be cleaned more thoroughly. 2) The consumption figures were determined under standard conditions. They are intended as a guide only and depend on the loading. For this reason figures may vary in practice. All programme cycles begins with a drainage. 14 english AEG Favorit CE 3-09-30 08.38 Sidan 15 Instruction book Coffee cups, delicate items All types of dishes • normaly soiled • lightly soiled • lightly soiled GLASS 50° 30 MIN 40° ECO 55° Pre-rinse Washing Rinse Final rinse Drying Washing Rinse Final rinse - Washing Rinse Final rinse - 150 minutes 35 minutes 30 minutes 54 minutes - - 0,63 kWh 0,40 kWh 0,35 kWh 7 litres 6 litres 6 litres 15 english AEG Favorit CE 3-09-30 08.38 Sidan 16 Instruction book Loading the dishes ● Always place glasses, cups and bowls upside down. Incline deep dishes (soup plates etc.) so that the water can run off when drying. ● Make sure that the dishes do not rest against each other. This is particularly important in regard to the cutlery basket - nested spoons, etc. simply cannot be properly washed. The water must get at all the soiled surfaces. ● Make sure that cutlery with slender handles and other items do not protrude through the openings in the basket and prevent the spray arm from rotating. ● Never put silver and stainless steel objects together. When these metals come into contact with each other a chemical reaction occurs which stains the silver. ● When washing delicate items, select the programme with the lower wash temperature. ● Substances such as ketchup containing strong colouring agents can cause temporary discolouration to the interior of the dishwasher. ● Caution! Do not place sharp knives with their points upwards. It is much safer to lay them horizontally in the main basket. If required, the top and the handle to the cutlery basket are removable. Baskets Main basket Cutlery basket 16 english AEG Favorit CE 3-09-30 08.38 Sidan 17 Instruction book Using the appliance Starting the programme 1. Scrape or rinse off solid food remnants. 2. Load the dishwasher. 3. Put the correct amount of detergent into the detergent dispenser and close the dispenser lid. 4. Close the door. 5. Press in the On/Off button. 6. Press in the required programme button (see programme chart). Programme indicator lamp is lit. During the six seconds the two top indicator lamps are flashing, you can select another programme cycle. If not, the selected programme starts. The lamp indicates which part of the selected cycle the dishwasher is in. Stopping the programme temporarily 1. Open the door. The programme stops. 2. Top or middle indicator lamp is flashing. 3. Close the door and the programme continues after about 6 seconds. Open the door carefully when the dishwasher is running, since hot steam may escape. Cancelling the programme 1. Press and hold in the button for the programme in progress until the indicator light for the programme goes out. 2. Release the programme button. The programme is now cancelled and a new programme can be selected. If you switch the dishwasher off, the selected programme is not finished, it is only disrupted. When you start the dishwasher again, the programme will continue. Pause function With the paus function the programme can be temporarily disrupted for a short period of time. 1. Press in the On/Off button. The programme stops. 2. All lamps goes out. 3. When you want the programme to continue again, you press the On/Off button. The programme continues. The programme should not be paused for any longer than necessary, because the water inside the dishwasher has cooled down and must be heated again which increases the power consumption. 17 english AEG Favorit CE 3-09-30 08.38 Sidan 18 Instruction book Cancelling the drying phase In case you do not want to wait until the drying phase is completed, you can cancel it. 1. Press in the On/Off button. The control lamp for the On/Off button goes out. 2. Open the door. The drying phase is cancelled. Setting the delay start The programme start can be delayed by 3, 6 or 9 hours. 1. Press in the On/Off button. 2. Press the delay start button repeatedly, until the lamp next to the required hours of delay is lit. 3. Press the button for the required programme. 4. After the set delayed start time has elapsed, the programme starts. Reset the delayed start: If the programme has not started, you can change the set time with the delayed start button. Cancelling the delayed start: If the programme has not started, the delayed start can be cancelled. Press the delay start button repeatedly, until none of the lamps next to the hours are lit. The required programme starts immediately. Switching the dishwasher off / unloading Do not switch the dishwasher off until the indicator lamp gramme cycle end is lit. for the pro- 1. Press in the On/Off button. The control lamp for the On/Off button goes out. 2. Leave the dishes in the dishwasher for approx. 15 minutes after the end of the programme so that they dry better and cool down. 3. Check the strainers/filters to see if they need to be cleaned when the dishwasher has finished the programme. Hot dishes are sensitive to mechanical shocks. Always let the dishes cool down before unloading. 18 english AEG Favorit CE 3-09-30 08.38 Sidan 19 Instruction book Care and cleaning Machine Clean the outside surfaces of the appliance using a mild (non-abrasive) household cleaning product. Finish by removing remaining traces of the product with a damp cloth. Caution! Do not use cleaning products which contain alcohol (spirits), thinners and similar substances. Spray arm (1) It is important to keep all the holes in the spray arm clear. A clogged hole can seriously affect washing efficiency. If the spray arm needs cleaning, unscrew the nut anti-clockwise, remove the washer and lift off the spray arm. Clear the holes and shake out any food remnants. Coarse filter/microfilter (2) The purpose of the coarse filter is to catch large objects such as toothpicks and pieces of eggshell. Make sure that the filter is always clean. Turn the coarse filter anti-clockwise. Lift it out and rinse it under running water whenever necessary. Fine filter (3) It is just as important to keep this filter clean. A dirty or clogged filter will always impair washing efficiency. The fine filter can easily be lifted out for cleaning when you have removed the coarse filter. 19 english AEG Favorit CE 3-09-30 08.38 Sidan 20 Instruction book In the event of a fault Before calling out an engineer, please check through the details below because some faults can be rectified easily without the need to call out an engineer. 20 Fault Check The programme will not start. Is the door closed properly? Have you pressed the On/Off button? Is the water tap turned on? Is the dishwasher plugged in? Has the fuse blown? Is the delayed start-button pressed in? Is the previous programme finished? The dishwasher is not filling with water. Is the water tap turned on? Has your domestic water supply been cut off temporarily? Is the water inlet hose kinked or blocked? Is the filter inside the inlet hose blocked? Is the water pressure too low? Water not discharged at end of cycle. Did you open the door before the programme cycle finished? Are the filters clogged? Dishes not washed satisfactorily. Has anything prevented the spray arm from rotating? Are the spray arm holes clogged? Were the dishes packed too close together? Are the filters clogged? Are the filters fitted correctly in place? Did you use enough detergent? Is the salt container cap properly closed? Did you select a programme with too low temperature? Is the rinse aid dispenser empty? english AEG Favorit CE 3-09-30 08.38 Sidan 21 Instruction book Fault Check Visible lime deposits or white film on the dishes. Is the salt container empty? Is the water softener not correctly adjusted? Is the rinse aid dispenser empty? Is the rinse aid dispenser adjusted to too low dosage? The dishwasher is noisy. Are the dishes rattling against each other? Is the spray arm knocking against the dishes? Whistling sound when washing. This is not a fault, try another brand of detergent. The dishes are not quite dry and are not shiny. Is the rinse aid dispenser empty? Is the rinse aid dispenser adjusted to too low dosage? Have the dishes been left too long inside the dishwasher? The door is difficult to close. Is the dishwasher level? If the top or middle indicator lamp is flashing, it is possible that you can solve the problem your self. When the problem is solved, press in the On/Off button and the programme continues. If the problem occurs again, contact your local service centre. If any other lamps flash contact and inform your local service centre. Fault Check The top indicator lamp flashes. Is the water tap turned on? Is the filter inside the inlet hose blocked? Is the water inlet hose kinked or blocked? The middle indicator lamp flashes. Is your domestic sewer system blocked? 21 english AEG Favorit CE 3-09-30 08.38 Sidan 22 Service Service Service and spare parts Servicing and repairs must be carried out by a service company authorized by the supplier. Use only spare parts supplied by these. Before calling out an engineer, please check through the details under the heading ”In the event of a fault” because some faults can be rectified easily without the need to call out an engineer. If an engineer is called to resolve a problem listed below or to repair a fault caused by incorrect installation or mis-use a charge will be made, even if the appliance is under guarantee. Give the appliance’s model designation, PNC-number and F/S-Nr. (Serienumber) according to the data plate affixed to the rear of the dishwasher. You can record these details here: Model designation ............................................................ E/PNC-Nr. ............................................................ F/S-Nr. ............................................................ Purchase date ............................................................ Clear and concise details of the fault: - What is the fault? - When does the fault occur? 22 english AEG Favorit CE 3-09-30 08.38 Sidan 23 Position- and connection instructions Position- and connection instructions Technical specifications Capacity: 6 place settings acc. EN 50242 Dimensions: Height Width Depth (to the edge of the door) Depth (to the middle of the door) 447 546 480 507 Weight: Net 22 kg mm mm mm mm Water pressures: Minimum Maximum Water temperature: Maximum 80 kPa (0,8 bar) 1000 kPa (10 bar) 65° C Electrical data: 230 V ~ 50 Hz 10 A 1100 W 1180 W Power supply Fuse Heating element Power rating This appliance complies with the following E.E.C. directives: – 73/23/EEC, dated 19.02.1973 – low-voltage directive. – 89/336/EEC, dated 03.05.1989 (incl. amendment – 92/31/EEC) – directive on electromagnetic compatibility. 23 english AEG Favorit CE 3-09-30 08.38 Sidan 24 Position- and connection instructions Installation Unpacking Check the dishwasher for transport damage. Never connect a damaged machine. In the case of damage, please contact your retailer. Keep all packaging away from children. Check that the following accessories are supplied: – A funnel for filling salt (1) – Elbow for discharge hose (2) 1 2 Protecting against freezing If the dishwasher is placed in an environment where the temperature sometimes fall below 0° C, there is a risk that the small amount of water which remains inside the parts of the dishwasher will freeze and damage it. To prevent this you should: 1. Turn off the water supply to the dishwasher. 2. Remove the water inlet and discharge hoses. 3. Make sure that there is coarsegrained salt in the salt container for the water softener. The appliance is only to be used and stored indoors at normal room temperature. The manufacture is not responsible for any frost damage. Positioning The dishwasher is intended to be installed on a kitchen sink, worktop or built-in. To function properly, make sure that the appliance is level. Its height can be adjusted with the adjustable feets (5 mm each). See the illustration for built-in measurements. 24 english AEG Favorit CE 3-09-30 08.38 Sidan 25 Position- and connection instructions Water inlet The dishwasher is equipped with safety features which are to prevent the water from going back to the fresh water system. These features are according to current water technical safety regulations. The temperature of the water supply should not exceed 65° C and the pressure should be between 80-1000 kPa (0,8 - 10 bar). It is important to have a tap or stopcock, positioned close to the dishwasher and with easy access. Special mixer taps with dishwasher connections are available, as well as adaptors for older mixer taps. Connect the inlet hose to a tap with a 3/4" pipe thread. The inlet hose must not be joined onto any form of extension hose. If it is too short, the entire hose must be replaced with a longer high-pressure hose, specially designed for the purpose. The end of the hose, which is connected to the dishwasher can be turned in any direction. Loosen the retaining nut, turn the hose, then retighten the nut. Check that the nut is tight before the machine is moved into position. Use only the inlet hose supplied to the dishwasher, do not reuse the old inlet hose. 25 english AEG Favorit CE 3-09-30 08.38 Sidan 26 Position- and connection instructions Water drainage To protect the dishwasher against water damage it is equipped with a water safety system. In the event of a fault the drainpump starts automatically and the remaining water inside the dishwasher is pumped out. The water safety system also works when the dishwasher is switched off. However the dishwasher must be connected electrically. Place the discharge hose over the sink as illustrated. It must not at any point be higher up than 75 cm over the surface which the dishwasher is standing on. If it runs higher, operation of the dishwasher might be impaired. It is also important to ensure that the inside diameter of the hose is not less than 13 mm at any point. If the discharge hose is too long, it can easily be cut to the right length. 1. Cut the hose to a suitable length, using a sharp knife. 2. Fit the elbow supplied onto the end of the hose. 26 english AEG Favorit CE 3-09-30 08.38 Sidan 27 Position- and connection instructions Electrical connection The dishwasher is supplied with a lead and electrical plug for connection to a 230 V earthed wall socket, which should be easily accessible and protected by a 10 A fuse. Permanent electrical installation must be carried out by an authorized electrician or competent person. Before any work is carried out on the dishwasher, it must be isolated from the electric mains supply, for example by removing the plug from the wall socket. Information for test centres The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual. Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using detergent and a clean load. Test standard: EN 50242 and EN 60704 Rated capacity: 6 place settings accordance EN 50242 Loading of basket: see chapter ”Loading the dishes” Test program: Eco 55° C Detergent (IEC Type B): 15 gram in the dispenser + 3 gram in the pre-wash dispenser Rinse aid (Type III): setting 3 Water pressure: minimum 0,8 bar, maximum 10 bar Waste water outlet: install according to figure below 27 english AEG Favorit CE 822 61 10-33 3-09-30 08.38 Sidan 28
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement