Neue CMH902SS User Manual

User manual
Cooker hood
&0+66
&0+66
EN - User manual
Safety warning
The minimum distance between the hob surface on which the pans stand and the
lower part of the hood must be 65 cm, unless otherwise specified in the installation
instructions. If the hob installation instructions specify a greater distance, it must
be taken into account.
The air collected must not be conveyed into a duct used to blow off smokes from
appliances fed with an energy other than electricity (central heating systems,
thermosiphons, water-heaters, etc.).
Comply with the official instructions provided by the competent authorities in merit
when installing the disposal duct. In addition, exhaust air should not be discharged
into a wall cavity, unless the cavity is designed for that purpose.
The room must be well aerated in case a hood and some other heat equipment
fed with an energy other than electricity (gas, oil, coal heaters, etc) operate at the
same time.
In fact the intake hood, disposing of air, could create a vacuum in the room. The
vacuum should not exceed 0,04mbar. This prevents the gas exhausted by the
heat source from being intaken again. It is therefore advisable to ensure the room
contains air taps able to ensure a steady flow of fresh air.
Check the data label inside the appliance; if the symbol ( ) is printed, read the
following: this appliance has such technical particulars that it belongs to class II
insulation, therefore it must not be earthed.
Check the data label inside the appliance; if the symbol ( ) is NOT printed, read
the following: ATTENTION: This appliance must be earthed. When making the
electrical connections, check that the current socket has a ground connection.
When making the electrical connections, check that the voltage values correspond to those indicated on the data plate inside the appliance itself. In case
your appliance is not fitted with a supply cord and a plug or with other means for
disconnection from the supply mains having a contact separation in all poles that
provide full disconnection under overvoltage category III conditions, that means
for disconnection must be incorporated in the fixed wiring in accordance with the
wiring rules. If your unit features a power lead and plug, position this so the plug
is accessible.
Always switch off the electricity supply before carrying out any cleaning or servicing
operations on the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
2
agent or similarly qualified persons in order to avoid a hazard.
Warning: Failure to install the screws or fixing device in accordance with these
instructions may result in electrical hazards.
The appliance must be installed by a qualified person in compliance with the
instructions provided.
Avoid using materials which could cause spurts of flame (flambées) near the
appliance.
Do not flambé under the range hood.
When frying, take particular care to prevent oil and grease from catching fire.
Already used oil is especially dangerous in this respect. Do not use uncovered
electric grates.
To avoid possible risks of fire always comply with the indicated instructions when
cleaning grease filters and when removing grease deposits from the appliance.
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way by a person responsible for their safety and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
Caution: accessible parts may become hot when used with cooking appliances.
This kitchen hood is intended for installation in domestic kitchens above cooktops,
cooking devices and similar kitchen equipment.
3
Environment concerns
.
Recycle the materials with the symbol
Put the packaging in applicable containers to recycle it.
Help protect the environment and human health and to
recycle waste of electrical and electronic appliances.
Do not dispose appliances marked with the symbol
with the household waste. Return the product to
your local recycling facility or contact your municipal
offi ce department for household waste or the shop
where you purchased this product.
Standard Guarantee Conditions and
Exclusions.
All our products come with 24 month warranty.
To see our guarantee conditions and exclusions
please visit our Customer Care Department
www.benchmarxjoinery.co.uk.
Service and Spare Parts.
Service is provided by Electrolux Major Appliances as authorised service partner network.
Please contact your local Service Centre on; 03445
613613 (Your call will automatically be routed to
your local centre). Servicing and/or installation of
your product should be carried out by a suitably
qualifi ed engineer. In the user manual you will fi
nd some useful information on how to deal with
minor faults and how to take care of your product.
When contacting us for Service please ensure
that you have proof of purchase and the following
information available:
Model No …………………………..................……..
SerialNo…………………………………………………
Product No..............................................................
Date of Purchase....................................................
Customer Care:
Please contact Electrolux Major Appliances, Addington Way, Luton, Bedfordshire, LU4 9QQ
Contact No: 08445 613613
4
Use
Filtering or Ducting version?
The hood may be in filtering or in ducting version.
Decide from the outset which type is to be installed.
For better efficiency, we recommend installing the
hood in the ducting version (if possible).
The activated charcoal filter is not washable and
cannot be regenerated, and must be replaced approximately every 4 months of operation, or more
frequently for particularly heavy usage.
Ducting version
The hood purifies the air and evacuates it to the
outside through an exhaust duct.
Filtering version
The hood purifies the air and recycles the clean
air back into the room.
Maintenance
Thorough servicing guarantees correct and long-lasting operation.
Any fat deposits should be removed from the appliance
periodically depending on amount of use (at least
every 2 months). Avoid using abrasive or corrosive
products. To clean painted appliances on the outside,
use a cloth dipped in lukewarm water and neutral
detergent. To clean steel, copper or brass appliances on the outside, it is always best to use specific
products, following the instructions on the products
themselves. To clean the inside of the appliance, use
a cloth (or brush) dipped in denatured ethyl alcohol.
Clean grease filters in relation to use, at least every
2 months to prevent the risk of fire.
Hand wash or clean in a dishwasher using a
neutral detergent. If washing in the dishwasher,
possible discoloration of the filters does not in any
way compromise their functioning.
Controls
- Light switch.
- First speed motor ON/OFF switch.
- Second speed switch.
- Third speed switch.
Lighting
Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs
ensure they are cooled down.
Replace it with lamps of the same type (ø35, E14,
4W).
ILCOS D code: DRBB/F-4-220-E14-37/105
5
!
!
6
7
1x
1x
6x ø4,8x38
6x ø8
1x
2x ø3,9x6
ø150mm
1x
1x
2x ø3,9x13
2x
ø150mm
1x
1x
8
1x
2x
Type ECFB02
1
3
2
4x ø8
4x ø8
4
5
2x ø4,8x38
9
6
7
8
9
2x ø4,8x38
A
10
B
A.1
A.2
A.3
2x ø8
2x ø8
A.4
2x ø4,8x38
11
B.1
B.2
B.3
2x ø8
B.4
2x ø4,8x38
12
2x ø8
10
12
14
11
13
15
2x ø3,9x6
13
16
17
18
19
2x ø3,9x13
20
14
21
22
23
2x ø3,9x6
24
2x
Type ECFB02
15