Electrolux GA60GXI200 User Manual
Add to my manuals
44 Pages
Electrolux GA60GXI200 is a dishwasher that is designed to make your life easier. It has a variety of features that will help you to get your dishes clean and sparkling, including:
- 6 washing programs to choose from, so you can find the perfect cycle for your needs.
- A digital display that shows the time remaining in the cycle and other important information.
- A delay start function that allows you to set the dishwasher to run at a time that is convenient for you.
- A child lock that prevents the dishwasher from being opened accidentally.
advertisement
▼
Scroll to page 2
of 44
117990 83/1en 9-06-2007 12:05 Pagina 1 user manual dishwasher GA60GXI200 117990 83/1en 9-06-2007 12:05 Pagina 2 We were thinking of you when we made this product 117990 83/1en 9-06-2007 12:05 Pagina 3 welcome to the world of Electrolux electrolux 3 Welcome to the world of Electrolux You’ve chosen a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You can look at some examples on the cover in this manual. But now it’s time to study this manual and start using and enjoying the benefits from your new machine. We promise that it’ll make your life a little easier. Good luck! 117990 83/1 117990 83/1en 9-06-2007 12:05 Pagina 4 4 electrolux contents Contents Safety information 5 Product description 7 Control panel 8 First use 10 Daily use 14 Washing programmes 26 Care and cleaning 27 Something not working 29 Technical data 32 Hints for test institutes 34 Installation 35 Environment concerns 40 Warranty/Point of service 41 The following symbols are used in this manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information 117990 83/1en 9-06-2007 12:05 Pagina 5 safety information electrolux 5 Safety information ● In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. Correct use ● This dishwasher is only intended for washing household utensils suitable for machine washing. ● Do not put any solvents in the dishwasher. This could cause an explosion. ● Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. ● Only use products (detergent, salt and rinse aid) suitable for dishwashers. ● Avoid opening the door whilst the appliance is in operation, hot steam may escape. ● Do not take any dishes out of the dishwasher before the end of the dishwashing cycle. ● ● After use, isolate the appliance from the power supply and turn off the water supply. This product should be serviced only by an authorised service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons will cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts. General safety Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer. ● The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. ● Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves. ● Do not sit or stand on the open door. ● Child safety This appliance is designed to be operated by adults. Don’t allow children to use the dishwasher unsupervised. ● 117990 83/1en 9-06-2007 12:05 Pagina 6 6 electrolux safety information ● ● ● Keep all packaging well away from children. There is risk of suffocation. Keep all detergents in a safe place out of children’s reach. Keep children well away from the dishwasher when the door is open. Installation ● Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. ● All packaging must be removed before use. ● Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person. ● For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. ● Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard. ● All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components. For electrical and water connection carefully follow the instructions given in specific paragraphs. 117990 83/1en 9-06-2007 12:05 Pagina 7 product description electrolux 7 Product description 1 Upper basket 2 Water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm 117990 83/1en 9-06-2007 12:05 Pagina 8 8 electrolux control panel Control panel 1 Programme selection buttons 2 Multi-tab button The digital display indicates: 3 Delay start button - 4 Digital display - 5 Indicator lights - 6 On/Off button - - the level of hardness to which the water softener is set, the approximate remaining time of the running programme, activation/deactivation of the rinse aid dispenser (ONLY with "Multitab function active"), the end of a washing programme (a zero will appear in the digital display), the countdown of the delay start, fault codes concerning malfunction of the dishwasher. 117990 83/1en 9-06-2007 12:05 Pagina 9 control panel electrolux 9 Indicator lights Programme in progress Illuminates when a washing programme is set and remains illuminated for all the duration of the washing programme. Salt Illuminates when the special salt has run out. Rinse aid Illuminates when the rinse aid has run out. The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and/or rinse aid is necessary. To cancel a set programme or a programme in progress Simultaneously press and hold the two Cancel buttons, until all the programme button lights will illuminate. The programme has been cancelled and the machine is now in setting mode. Setting mode ● ● Press On/Off button, ALL programme button lights are illuminated = appliance in setting mode. Press On/Off button, ONLY a programme button light is illuminated = last performed or selected programme still set. In this case, to return to setting mode, the programme has to be cancelled. Always remember that when: - setting a washing programme, setting the water softener, activating/deactivating the rinse aid dispenser, the appliance MUST be in setting mode. 117990 83/1en 9-06-2007 12:05 Pagina 10 10 electrolux first use First use Before using your dishwasher for the first time: ● Ensure that the electrical and water connections comply with the installation instructions ● Remove all packaging from inside the appliance ● Set the water softener ● Pour 1 litre of water inside the salt container and then fill with dishwasher salt ● Fill the rinse aid dispenser If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc... set the Multi-tab function (see "Multi-tab function"). Set the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. Water hardness is measured in equivalent scales, German degrees (°dH), French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water). The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area. Adjusting the water hardness setting Water hardness Use of salt °dH °TH mmol/l manually electronically 51 - 70 43 - 50 91 - 125 76 - 90 9.0 - 12.5 7.6 - 8.9 2 2 level 10 level 9 yes yes 37 - 42 65 - 75 6.5 - 7.5 2 level 8 yes 29 - 36 51 - 64 5.1 - 6.4 2 level 7 yes 23 - 28 40 - 50 4.0 - 5.0 2 level 6 yes 19 - 22 33 - 39 3.3 - 3.9 2 level 5 yes 15 - 18 26 - 32 2.6 - 3.2 1 level 4 yes 11 - 14 19 - 25 1.9 - 2.5 1 level 3 yes 4 - 10 7 - 18 0.7 - 1.8 1 level 2 yes <4 <7 < 0.7 1 level 1 no * * no salt is necessary 117990 83/1en 9-06-2007 12:05 Pagina 11 first use electrolux 11 The water softener must be set in both ways: manually, using the water hardness dial and electronically, using some of the programme buttons on the control panel 3. Press button 1, the lights of buttons 2 and 3 turn off while the light of button 1 goes on flashing. In the digital display is visible the current level. Setting manually The dishwasher is factory set at position 2. 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3. Turn the water hardness dial to position 1 or 2 (see table). 4. Replace the lower basket. Examples: displayed = level 5 displayed = level 10 The dishwasher is factory set at level 5. 4. To change the level, press button 1. Each time the button is pressed the level changes. (For the selection of the new level see the chart). Examples: if the current level is 5, by pressing button 1 once, level 6 is selected. if the current level is 10, by pressing button 1 once, level 1 is selected. 1. Press the On/Off button. The dishwasher must be in setting mode. 5. To memorise the operation, switch off the dishwasher by pressing the On/Off button. Setting electronically 2. Simultaneously press and hold buttons 2 and 3, until the lights of buttons 1, 2 and 3 start flashing. 117990 83/1en 9-06-2007 12:05 Pagina 12 12 electrolux first use Filling with dishwasher salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion. To fill: 1. Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise. 2. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time). 3. Using the funnel provided, pour in the salt until the container is full. 4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. 5. Replace the cap tightly turning it clockwise until it stops with a click. Do not worry if water overflows from the unit when filling with salt, this is quite normal. The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected. 117990 83/1en 9-06-2007 12:05 Pagina 13 first use electrolux 13 Filling with rinse aid Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse. According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage). 1. Open the container by pressing the release button (A). The dose is factory set in position 4. 2. Add the rinse aid in the container. The maximum level for filling is indicated by "max". Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades. 3. Ensure that the lid is closed after every refill. The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash. Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance. 117990 83/1en 9-06-2007 12:05 Pagina 14 14 electrolux daily use Daily use ● Check if it’s necessary to refill with dishwasher salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. ● Before loading the dishes, you should: - Remove all left over food and debris. - Soften remnants of burnt food in pans ● When loading the dishes and cutlery, please note: - Dishes and cutlery must not impede the rotation of the spray arms . - Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base. - Dishes and items of cutlery must not lie inside one another, or cover each other. - To avoid damage to glasses, they must not touch. - Lay small objects in the cutlery basket. ● Plastic items and pans with non stick coatings have a tendency to retain water drops; these items will not dry as well as porcelain and steel items. ● Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move. 117990 83/1en 9-06-2007 12:05 Pagina 15 daily use electrolux 15 For washing in the dishwasher the following cutlery and dishes are not suitable: - Cutlery with wooden, horn, china or mother-of-pearls handles. - Plastic items that are not heat resistant. - Older cutlery with glued parts that are not temperature resistant. - Bonded cutlery items or dishes. - Pewter or copper items. - Lead crystal glass. - Steel items prone to rusting. - Wooden platters. - Items made from synthetics fibres. are of limited suitability: - Only wash stoneware in the dishwasher if it is specially marked as being dishwasher-safe by the manufacturer. - Glazed patterns may fade if machine washed frequently. - Silver and aluminium parts have a tendency to discolour during washing: Residues, e.g. egg white, egg yolk and mustard often cause discolouring and staining on silver. Therefore always clean left-overs from silver immediately, if it is not to be washed straight after use. 117990 83/1en 9-06-2007 12:05 Pagina 16 16 electrolux daily use Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely. The two rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls. 117990 83/1en 9-06-2007 12:05 Pagina 17 daily use electrolux 17 The cutlery basket Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. To make loading of the cutlery basket easier, lower the cutlery basket handle (fig.2). fig. 2 Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards (fig.1). fig. 1 For best results we recommend you to use the cutlery grids. If the size and dimensions of the cutlery do not allow the use of the grids, they can be easily hidden (fig. 3). fig. 3 If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. Mix spoons with other cutlery to prevent them from sticking together. 117990 83/1en 9-06-2007 12:05 Pagina 18 18 electrolux daily use The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart (fig. 4). fig. 4 To reassemble, reverse the procedure. 117990 83/1en 9-06-2007 12:05 Pagina 19 daily use electrolux 19 The upper basket The upper basket is designed for saucers, salad bowls, cups, glasses, pots and lids. Arrange items on and underneath the cup racks so that water can reach all surfaces. Glasses with long stems can be placed upside down in the cup racks. For glasses with long stems (according to the size and dimensions), set the glass holder to the left or right position. The central rows of prongs can be easily lowered to improve loading flexibility. The cup racks can be adjusted in three different positions to improve loading flexibility. Before closing the door, ensure that the spray arms can rotate freely. 117990 83/1en 9-06-2007 12:05 Pagina 20 20 electrolux daily use Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of the dishes in the lower basket With upper basket raised 33 cm With upper basket lowered 29 cm To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mechanism is engaged and the basket is stable. Never lift or lower the basket on one side only With the upper basket raised we recommend to adjust the cup racks in the lowest position. After loading your machine always close the door, as an open door can be a hazard. To lower the basket to the original position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards and then allow the mechanism to drop back down slowly, keeping hold of it. 117990 83/1en 9-06-2007 12:05 Pagina 21 daily use electrolux 21 Use of detergent 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent Only use detergents specifically designed for use in dishwashers. Please observe the manufacturer’s dosing and storage recommendations as stated on the detergent packaging. Using no more than the correct amount of detergent contributes to reducing pollution. 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will take effect during the prewash phase. When using detergent tablets; place the tablet in compartment (1) Fill with detergent 1. Open the lid. 4. Close the lid and press until it locks in place. 2. Fill the detergent dispenser (1) with detergent. The marking indicates the dosing levels: 1 2 Detergent tablets Detergent tablets from different manufactures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals. 117990 83/1en 9-06-2007 12:05 Pagina 22 22 electrolux daily use Multi-tab function This appliance is equipped with the Multi-tab function, that allows the use of combi detergent tablets. These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose (‘3 in 1’, ‘4 in 1’, ‘5 in 1’ etc...) Check whether these detergents are suitable for your water hardness. See the manufacturers instructions. Once this function is selected it will remain active also for the following washing programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated. Select the Multi-tab function before the start of a washing programme. With the use of the Multi-tab function, the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated. Once the programme is running, the Multi-tab function can NO longer be changed. If you want to exclude the Multi-tab function you have to cancel the programme setting and then deactivate the Multi-tab function. In this case you have to set a washing programme (and desired options) again. Activation / deactivation of the Multi-tab function Press the Multi-tab button, the corresponding indicator light illuminates. (Function active). To deactivate the function press the Multi-tab button again, the corresponding indicator light turns off. (Function not active). If the drying results are not satisfactory we suggest that you: 1. Fill up the rinse aid dispenser with rinse aid. 2. Activate the rinse aid dispenser. 3. Set the rinse aid dosage to position 2. ● The activation/deactivation of the rinse aid dispenser can only be possible with the Multi-tab function active. Activation/deactivation of the rinse aid dispenser 1. Press the On/Off button. The dishwasher must be in setting mode. 2. Simultaneously press and hold buttons 2 and 3, until the lights of buttons 1, 2, and 3 start flashing. 117990 83/1en 9-06-2007 12:05 Pagina 23 daily use electrolux 23 3. Press button 2, the lights of buttons 1 and 3 turn off while the light of button 2 goes on flashing. The digital display indicates the current setting. If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the Multi-tab function. 2. Fill up the salt container and the rinse aid dispenser again. 3. Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes. 4. To change the setting, press button 2 again, the digital display indicates the new setting. 4. Adjust the water hardness setting according to the hardness of the water in your area. 5. Adjust the rinse aid dosage. Rinse aid dispenser deactivated Rinse aid dispenser activated 5. To memorise the operation, switch off the dishwasher by pressing the On/Off button. 117990 83/1en 9-06-2007 12:05 Pagina 24 24 electrolux daily use Select and start a washing programme 2. Close the dishwasher door, the countdown starts automatically. The number in the display is no longer flashing but fixed with static light. Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings. 3. The countdown will decrease with steps of 1 hour. 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate 5. Once the delay start has elapsed the programme will start automatically. 4. The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted. 2. Check that the water tap is opened 3. Press the On/Off button. The dishwasher must be in setting mode. 4. Press the button corresponding to the required programme (see "Washing programmes" chart). When a programme has been selected the corresponding light will illuminate. The programme in progress indicator light illuminates. Close the dishwasher door, the programme starts automatically. The programme in progress indicator light remains illuminated. Setting and starting the programme with "delay start" 1. After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start will appear in the digital display. The commencement of the selected washing programme can be delayed from 1 to 19 hours. With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the programme in progress indicator light will illuminate. The selection of the washing programme and delay start can also occur with the door closed. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically. 117990 83/1en 9-06-2007 12:05 Pagina 25 daily use electrolux 25 Cancelling the "delay start" To cancel a delay start in progress you have to reset the dishwasher. Simultaneously press and hold the two Cancel buttons, until all the programme button lights illuminate. Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again. Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully. Interrupt a washing programme in progress: ● Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. ● Press the On/Off button, all lights will turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted. Cancel a washing programme in progress ● Simultaneously press and hold the two Cancel buttons, until all the programme button lights illuminate. The washing programme has been cancelled. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. End of the washing programme ● The dishwasher will automatically stop. ● The programme in progress indicator light remains illuminated. ● The light of the programme just ended will remain on. ● Zero appears in the digital display. 1. Switch off the dishwasher by pressing the On/Off button. 2. Open the dishwasher door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Unloading the dishwasher ● Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. ● Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. ● Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. 117990 83/1en 9-06-2007 12:05 Pagina 26 26 electrolux washing programmes Washing programmes Programme Degree of soil Type of load Programme description Heavy soil Intensive Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Normal soil Auto (1) Crockery, cutlery, pots and pans Prewash Main wash up to 50°C or 65°C 1 or 2 intermediate rinses Final rinse Drying Normal soil Crockery and cutlery Prewash Main wash up to 50°C 1 intermediate rinse Final rinse Drying Normal or light soil Crockery and cutlery Main wash up to 60°C Final rinse Eco (2) Quick (3) Washing programmes information (1) During the "Auto" washing programme the amount of soil on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 50°C and 65°C. (2) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (3) Test programme for test institutes. 117990 83/1en 9-06-2007 12:05 Pagina 27 care and cleaning electrolux 27 Care and cleaning Cleaning the filters The filters must be checked and cleaned from time to time. Dirty filters will degrade the washing result. Before cleaning the filters ensure that the machine is switched off. 4. Take hold of the coarse filter (A) by the handle with the hole and remove from the microfilter (B). 5. Clean all filters thoroughly under running water. 6. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly. 1. Open the door, remove the lower basket. 2. The dishwasher filter system comprises a coarse filter (A), a microfilter (B) and a flat filter. Unlock the filter system using the handle on the microfilter. 7. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly. 8. Place the coarse filter (A) in the microfilter (B) and press together. 3. Turn the handle about 1/4 a turn anticlockwise and remove the filter system. 9. Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment. NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results and may result in damage to the appliance. 117990 83/1en 9-06-2007 12:05 Pagina 28 28 electrolux care and cleaning NEVER try to remove the spray arms. If residues of soil have clogged the holes in the spray arms, remove them with a cocktail stick. Frost precautions Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoidable, empty the machine, close the appliance door, disconnect the water inlet pipe and empty it. External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. Moving the machine If you have to move the machine (moving house etc....): 1. Unplug it. 2. Turn the water tap off. 3. Remove the water inlet and discharge hoses. 4. Pull the machine out together with the hoses. Avoid over tilting the machine during transportation. Internal cleaning We recommend every 3 months to run the wash programme for heavy soiled dishes using detergent but without dishes. Prolonged periods of nonoperation If you are not using the machine for any prolonged period of time you are advised to: 1. Unplug the appliance and then turn off the water. 2. Leave the door ajar to prevent the formation of any unpleasant smells. 3. Leave the inside of the machine clean. 117990 83/1en 9-06-2007 12:05 Pagina 29 something not working electrolux 29 Something not working The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Switch off the appliance and carry out the following suggested corrective actions. Fault code and malfunction ● appears in the digital display Possible cause and solution ● The water tap is blocked or furred with limescale. Clean the water tap. ● The water tap is turned off. Turn the water tap on. ● The filter (where present) in the threaded hose fitting at the water inlet valve is blocked. Clean the filter in the threaded hose. ● The water inlet hose has not been correctly laid or it is bent or squashed. Check the water drain hose connection. ● The sink spigot is blocked. Clean out the sink spigot. ● The water drain hose has not been correctly laid or it is bent or squashed. Check the water drain hose connection. ● Close the water tap and contact your local Service Force Centre. The dishwasher does not fill with water ● appears in the digital display The dishwasher will not drain ● appears in the digital display Anti-flood device is activated 117990 83/1en 9-06-2007 12:05 Pagina 30 30 electrolux something not working Malfunction The programme does not start Once these checks have been carried out; switch on the appliance. The programme will continue from the point at which it was interrupted. If the message reappears in the display contact the Service Force Centre. For other messages not described in the chart, please contact your Service Force Centre. Contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.). This information can be found on the rating plate located on the side of the dishwasher door. So that you always have these numbers at hand, we recommend you to make a note of them here: Mod. : . . . . . . . . . . . . . . . . . . . . . . . PNC :. . . . . . . . . . . . . . . . . . . . . . . . S.N. : . . . . . . . . . . . . . . . . . . . . . . . . Possible cause and solution ● The dishwasher’s door has not been properly closed. Close the door. ● The main plug is not plugged in. Insert the main plug. ● The fuse has blown out in the household fuse box. Replace the fuse. ● Delay start has been set. If dishes are to be washed immediately, cancel the delay start. 117990 83/1en 9-06-2007 12:05 Pagina 31 something not working electrolux 31 The wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate freely due to incorrect arrangement of the load. ● The filters in the base of the washing compartment are dirty or incorrectly positioned. ● Too little or no detergent has been used. ● Where there are limescales deposits on the dishes; the salt container is empty or the incorrect level of the water softener has been set. ● The drain hose connection is not correct. ● The salt container cap is not properly closed. The dishes are wet and dull ● Rinse There are streaks, milky spots or a bluish coating on glasses and dishes ● Decrease Water drops have dries onto glasses and dishes ● Increase ● The aid was not used. rinse aid dispenser is empty. rinse aid dosing. rinse aid dosing. ● The detergent may be the cause. Contact the detergent manufacturer’s consumer care line. If after all these checks, the problem persists, contact your local Service Force Centre. 117990 83/1en 9-06-2007 12:05 Pagina 32 32 electrolux technical data Technical data Dimensions Width 59.6 cm Height 86.8 - 94.8 cm Depth 57.5 cm Electrical connection Voltage - Overall power Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher’s door Water supply pressure Minimum 0.05 MPa Maximum 0.8 MPa Capacity Max. weight Subject to change without notice 12 place settings 43.5 kg 117990 83/1en 9-06-2007 12:05 Pagina 33 technical data electrolux 33 Consumption values Programme Intensive Auto Programme duration (in minutes) Energy consumption (in kWh) Water consumption (in litres) 110 - 120 1.8 - 2.0 23 - 25 90 115 1.1 - 1.5 12 - 23 160 1.05 15 30 0.9 9 Eco (Test programme for test institutes) Quick The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes. 117990 83/1en 9-06-2007 12:05 Pagina 34 34 electrolux hints for test institutes Hints for test institutes Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Consumption values"). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Consumption values"). Full load: 12 standard place settings Amount of detergent required: 5 g + 25 g (Type B) Rinse aid setting: position 4 (Type III) Arrangement upper basket (take off the glass holder) Arrangement cutlery basket Arrangement lower basket Cup racks: position 2 117990 83/1en 9-06-2007 12:05 Pagina 35 installation electrolux 35 Installation Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. This dishwasher is designed to be fitted under a kitchen counter or worksurface. Attention! Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel. No further openings for the venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. The dishwasher incorporates adjustable feet to allow the adjustment of the height. During all operations that involve accessibility to internal components the dishwasher has to be unplugged. When inserting the machine, ensure that the water inlet hose, the drain hose and the supply cable are not kinked or squashed. Fixing to the adjacent units The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall). Levelling Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level. 117990 83/1en 9-06-2007 12:05 Pagina 36 36 electrolux installation Water supply connections This dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" gas thread spout or to a purpose made quick-coupling tap such as the Press-block. The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area. The water inlet hose must not be kinked, crushed, or entangled when it is being connected. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible). If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. DO NOT use connection hoses which have previously been used for an old appliance. This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations. 117990 83/1en 9-06-2007 12:05 Pagina 37 installation electrolux 37 Water inlet hose with safety valve After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water. Please take care when installing the water inlet hose: ● The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water. ● If water inlet hose or the safety valve is damaged, remove the mains plug immediately. ● A water inlet hose with safety valve must only by the Service Force Centre. Warning! Dangerous voltage 117990 83/1en 9-06-2007 12:05 Pagina 38 38 electrolux installation Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot 2. To a stand pipe provided with venthole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We therefore advise you to remove it. 117990 83/1en 9-06-2007 12:05 Pagina 39 installation electrolux 39 Electrical connection Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plug into a correctly installed shockproof socket. Multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard through overheating. If necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local Service Force centre. The plug must be accessible after the appliance has been installed. Never unplug the appliance by pulling on the cable. Always pull the plug. The manufacturer accepts no liability for failure to observe the above safety precautions. 117990 83/1en 9-06-2007 12:05 Pagina 40 40 electrolux environment concerns Environment concerns Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. When a unit is no longer being used: - Pull the plug out of the socket. - Cut off the cable and plug and dispose of them. - Dispose of the door catch. This prevents children from trapping themselves inside and endangering their lives. Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. 117990 83/1en 9-06-2007 12:05 Pagina 41 warranty/point of service electrolux 41 Warranty/Point of service Servicestellen Points de service Servizio dopo vendita Point of service 5506 Mägenwil/Zürich Industriestr. 10 9000 St. Gallen Zürcherstrasse 204 e 4127 Birsfelden Hauptstrasse 52 6020 Emmenbrücke Seetalstrasse 11 Service-Helpline 0848 848 111 [email protected] 7000 Chur Comercialstrasse 19 3018 Bern Morgenstrasse 131 1028 Préverenges Le Trési 6 6916 Grancia Zona Industriale E Ersatzteilverkauf / Point de vente de rechange / Vendita pezzi di ricambio / spare parts service 55 Mägenwil, Industriestrasse 10, Tel. 0848 848 023 Fachberatung, Verkauf/Demonstration, Vente/Consulente (cucina), Vendita/consulting, sales 8048 Zürich, Badenerstrasse 587, Tel. 044 405 81 11 117990 83/1en 9-06-2007 12:05 Pagina 42 42 electrolux warranty/point of service Garantie Für jedes Produkt gewähren wir ab Verkauf bzw. Lieferdatum an den Endverbraucher eine Garantie von 2 Jahren. (Ausweis durch Garantieschein, Faktura oder Verkaufsbeleg). Die Garantieleistung umfasst die Kosten für Material, Arbeitsund Reisezeit. Die Garantieleistung entfällt bei Nichtbeachtung der Gebrauchsanweisung und Betriebsvorschriften, unsachgerechter Installation, sowie bei Beschädigung durch äussere Einflüsse, höhere Gewalt, Eingriffe Dritter und Verwendung von Nicht-Original Teilen. Garantie Nous octroyons sur chaque produit 2 ans de garantie à partir de la date de livraison ou de la mise en service au consommateur (documenté au moyen d’une facture, d’un bon de garantie ou d’un justificatif d’achat). Notre garantie couvre les frais de mains d’oeuvres et de déplacement, ainsi que les pièces de rechange. Les conditions de garantie ne sont pas valables en cas d’intervention d’un tiers non autorisé, de l’emploi de pièces de rechange non originales, d’erreurs de maniement ou d’installation dues à l’inobservation du mode d’emploi, et pour des dommages causés par des influences extérieures ou de force majeure. Garanzia Per ogni prodotto concediamo una garanzia di 2 anni a partire dalla data di consegna o dalla sua messa in funzione. (Fa stato la data della fattura, del certificato di garanzia o dello scontrino d’acquisto) Nella garanzia sono comprese le spese di manodopera, di viaggio e del materiale. Dalla copertura sono esclusi il logoramento ed i danni causati da agenti esterni, intervento di terzi, utilizzo di ricambi non originali o dalla inosservanza delle prescrizioni d’istallazione ed istruzioni per l’uso. Warranty For each product we provide a two-year guarantee from the date of purchase or delivery to the consumer (with a guarantee certificate, invoice or sales receipt serving as proof). The guarantee covers the costs of materials, labour and travel. The guarantee will lapse if the operating instructions and conditions of use are not adhered to, if the product is incorrectly installed, or in the event of damage caused by external influences, force majeure, intervention by third parties or the use of non-genuine components. 117990 83/1en 9-06-2007 12:05 Pagina 43 117990 83/1en 9-06-2007 12:05 www.electrolux.com www.electrolux.ch 117990 83/1 - 01 - 09062007 Pagina 44
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement