Yamaha RX-797 Product Bulletin

RX-797
Natural Sound AM/FM Stereo Receiver
NEW
PRODUCT
BULLETIN
Top Class High Power and Pure Sound Technology with ToP-ART, CD Direct
Amplification and Linear Damping, Plus Convenient Features such as MultiZone Control Capability.
Preset Remote (Right) and
Zone Remote (Left) Units
Black finish available in some areas
1
High Sound Quality
䢇 ToP-ART (Total Purity Audio Reproduction
Technology)
䢇 Switchable CD Direct Amplification
䢇 Super Audio CD and DVD-Audio Ready with Extended
Frequency Response
䢇 Linear Damping
䢇 High Dynamic Power, Low-Impedance Drive Capability
2
Advanced Facilities
䢇 Multi-Zone Control Capability with Dedicated Zone
Remote Unit
䢇 Preset Remote Unit for Main Zone
䢇 Continuously Variable Loudness Control
䢇 Subwoofer Out
䢇 Remote Controllable Motor-Driven Volume Control
䢇 RoHS Compliant
P10016949CARLG-RX797@NPB
RX-797 Main Specifications
[AUDIO SECTION]
Minimum RMS Output Power (8 ohms, 20 Hz—20 kHz, 0.019% THD)
100 W + 100 W
Minimum RMS Output Power (6 ohms, 20 Hz—20 kHz, 0.03% THD)
120 W + 120 W
Output power (4 ohms, 1 kHz, 0.7% THD)
160 W + 160 W
Maximum Power (8 ohms, 1 kHz, 10% THD)
145 W + 145 W
Dynamic Power (8/6/4/2 ohms)
140 W/170 W/220 W/290 W
Damping Factor
(8 ohms, 20 Hz-20 kHz)
240 (speaker A)
Input Sensitivity/Impedance
Phono (MM)
2.5 mV/47 k-ohms
CD
200 mV/47 k-ohms
Main In
1 V/30 k-ohms
Frequency Response (Pure Direct) 10 Hz-100 kHz ±1 dB
Total Harmonic Distortion (20 Hz—20 kHz)
Phono (MM) to Rec Out
0.008% (3 V)
CD to Pre Out
0.007% (1 V)
CD to Sp Out
0.012% (50 W/8 ohms)
Signal-to-Noise Ratio [Input Shorted]
Phono (MM) [5 mV]
87 dB
CD [200 mV]
110 dB (CD Direct On)
[TUNER SECTION]
FM 50dB Quieting Sensitivity
(Mono/Stereo)
2 µV (17.3 dBf)/25 µV (39.2 dBf)
FM Usable Sensitivity (Mono)
1 µV (11.2 dBf)
FM Selectivity (400 kHz)
70 dB
FM Signal-to-Noise Ratio
(Mono/Stereo)
76 dB/70 dB
[GENERAL SECTION]
Dimensions (W x H x D)
435 x 151 x 389 mm
17-1/8” x 5-15/16” x 15-5/16”
Weight
10.6 kg; 23.4 lbs.
NEW PRODUCT BULLETIN
RX-797 Natural Sound AM/FM Stereo Receiver
High Sound Quality
ToP-ART (Total Purity Audio
Reproduction Technology)
When processing
and transmission of
the audio signal is
simple and direct there is less chance of it
being affected by noise and distortion.
Yamaha’s amplifier design technology
called ToP-ART features I/O (input to
output) Direct Symmetrical Design, with left
and right channels organized in a straight,
symmetrical layout for highest signal purity.
Switchable CD Direct Amplification
(Discrete Configuration)
Engaged by a front
panel switch, it
matches CD signal
levels so each stage produces less noise,
resulting in improved S/N ratio and
maintenance of the amp’s total gain
balance.
reproduction quality. DVD-Audio, Super
Audio CD and other new formats will be
able to output sound over this range, so
the RX-797 is fully compatible with
products using these formats.
Linear Damping
Level variations due to high amp
impedance tend to reduce an amplifier’s
damping factor, and frequency variations
cause it to fluctuate. This circuit cancels
the effect of these variations, maintaining
a high, stable damping factor, for
superior articulation of all sounds and
better frequency response.
High Dynamic Power, Low-Impedance
Drive Capability
The RX-797 is capable of delivering large
amounts of reserve power for accurate
reproduction of high energy peaks. This
emphasizes the music’s dynamic qualities
and provides a sharper sound image.
Advanced Facilities
Super Audio CD and DVD-Audio Ready
with Extended Frequency Response
Rather than the usual
20Hz–20kHz frequency
response, Yamaha has given the
RX-797 the ability to handle
frequencies from 10Hz to100kHz
(1dB). Although the ear cannot hear the
higher frequencies, it has been proven that
these harmonics can affect sound
Damping Factor Characteristics
Custom Installation Compatibility
As befits a high performance receiver, the
RX-797 is designed to be suitable for use
in custom installations. It has a Zone 2
out so the audio/video signal
can be output in a second room.
In addition, You can enjoy audio
in 3 different zones in your home
by using main zone speaker
output, Speaker B output, and
zone 2 audio/video output. There
is also a Zone 2 power switch,
Zone
an 2-in/1-out remote terminals
Remote
Unit
and trigger out.
Continuously Variable Loudness
Control and Bass/Treble/Balance
Controls
With this control, the midrange
Linear Damping
Yamaha’s Linear Damping maintains a
high, stable damping factor even at
frequencies from 10Hz to 20kHz, where it
generally tends to fall off. The result is
superior articulation of all sounds.
frequencies are attenuated over a
continuously varying, level-dependent
curve, instead of a fixed level of low and
high frequency boost as in conventional
loudness controls.
The bass/treble/balance controls are
continuously variable, so they can offer
smooth and accurate tonal response
control over a wide range. And, with the
controls set to their center defeat
positions, you have a perfectly flat tonal
balance, with no influence on the original
sound.
RoHS Compliant
This environmentally friendly receiver fully
complies with the EU’s RoHS (Restriction
of Hazardous Substances) standards.
Other Notable Features
• Pure Direct for Short and Direct Signal
Path
• Twin Heavy-Duty Aluminum-Extruded
Heat Sinks for Efficient Heat
Dissipation
• All Electronic Parts are Exceptionally
High Quality
• Logical Interior Layout for Low
Distortion and Reduced Noise
• Anti-Vibration, Anti-Resonance Chassis
• Thick ART (Anti-Resonance & Tough)
Base
• Rec Out/Zone 2 Selector
• Remote Controllable Motor-Driven
Volume Control
• Speaker A, B or A+B Selection
• RDS: Radio Data System (european
models only)
• 40-Station AM/FM Random Access
Preset Tuning
• Auto FM Station Memory and Preset
Editing (Auto Station Memory)
• Preset Remote Control Unit for Main
Zone
RX-797 Extensive Connections
3 A/V and MD/Tape Inputs,
and VCR and MD/Tape
Output Terminals
Remote Control
2 Input/1 Output
Terminal
Control
Output
Terminal
Impedance
Selector
(6 ohms/4 ohms)
Terminal for
Detachable
Power Cable
Output Power vs. Speaker Impedance
Output Power (Watts)
150
200
250
300
2
290
4
220
170
6
8
Speaker Impedance (ohms)
100
100
W
135
W
Monitor
Out
Terminal
W
W
W
CD and
Phono
Input
Terminals
Dynamic Power
per Channel
Min. RMS Power
per Channel
• Product designs and specifications are subject to change without notice.
Zone 2 Audio
and Video
Output
Terminals
Subwoofer
Output
Terminal
Pre-Main
Coupler
Speaker L/R (Speaker A, B or A+B
Selection) Terminals (2-Way BindingPost Speaker Terminals [Banana-Plug
Compatible])*
* Not available on European, Singapore
and Korean models.
Brilliant Audio: Titanium
Availability of titanium finish varies by area.
Please contact your dealer for availability.