Whynter BWR-281DZ User Manual

Whynter 28 Bottle Dual Temperature Zone Built-In
Wine Refrigerator
Model # : BWR-281DZ
INSTRUCTION MANUAL
Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before
using this product. Keep this manual in a safe place for future reference.
V 20180219-1037
Table of Contents
PAGE
Safety Precautions
3-4
Parts
5
Product Features
6
Installation
7-9
Operation and Controls
10 - 12
Storage
13
Care and Maintenance
14
Troubleshooting
15 - 16
Warranty Information
17
2
Safety Precautions
APPLIANCE SAFETY
Your safety and the safety of others are very important to us.
To reduce the risk of fire, electrical shock, or injury when using your appliance, follow
these basic precautions
This is the Safety Alert Symbol. This symbol alerts you to potential hazards
that may result in serious injury. All safety messages will follow the Safety
Alert Symbol and either the words” DANGER” or “WARNING”.
Danger means that failure to heed this safety
statement may result in severe injury or death.
Warning means that failure to heed this safety
statement may result in extensive product damage, serious injury, or death.
Caution means that failure to heed this safety
statement may result in minor or moderate injury,
or property or equipment damage.
All safety messages will alert you to know what the potential hazard is, tell you how to reduce the
chance of injury, and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUIDES
Before the appliance is used, it must be properly positioned and installed as
described in this manual, please read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the appliance, follow basic precaution,
including the following:

Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an
extension cord.

Do not use if the power supply cord is damaged. If damaged, it must be replaced by a qualified electrician.

It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot
be turned off by a switch or pull chain.

Never clean appliance parts with flammable fluids or harsh chemicals. These fumes can create a fire hazard or
explosion.
3
Safety Precautions





Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the appliance or any
other appliance.
Before proceeding with cleaning and maintenance operations, make sure to unplug the appliance.
Do not connect or disconnect the electric plug with wet hands.
Do not attempt to repair or replace any part of your appliance unless it is specifically recommended in this
manual. All other servicing should be referred to a qualified technician.
This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse
effect. Care must be taken during transportation and setting up of the appliance that no parts of the cooling
system are damaged. Leaking coolant can ignite and may damage the eyes.
In the event of leakage:
-
Avoid open flames and anything which creates a spark
-
Disconnect from the mains
-
Air the room in which the appliance is located for several minutes and contact the Service Department
for advice
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL





















Use two or more people to move and install the appliance. Failure to do so can result in injury.
To ensure proper ventilation for your appliance, the front of the appliance must be completely unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This appliance must be installed in an area protected from the element, such as wind, rain, water spray or drips.
The appliance should not be located next to ovens, grills or other sources of high heat.
The appliance must be installed with all electrical connections in accordance with state and local codes.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the appliance to be leveled in order to work properly. For a stable installation, make sure
the appliance is placed on a flat, level and solid surface.
Ensure that the surface on which the appliance is placed is strong enough to hold the appliance and the
items stored inside.
This appliance is not intended for use by young children or physically-challenged persons without supervision/assistance. Young children must be supervised to ensure safety around this or any appliance.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may damage or
discolor the interior.
Keep fingers out of the “pinch point” areas. Clearance between the doors and between the doors and
cabinet are necessarily small. Be careful closing doors when children are in the area.
This wine refrigerator is designed to store wine bottles. If food is stored inside, ensure that there is sufficient airflow between items. Please note that the temperature range for this wine refrigerator is optimized
for wine and beverage storage. Perishable food items may require a different storage environment.
Do not place hot food or beverages into the appliance.
Close the wine refrigerator door immediately after putting in any items to keep the internal temperature
relatively constant.
Avoid placing any objects on top of the appliance.
This is an electrical appliance, to avoid injury from electrical shock do not operate the unit with wet hands,
while standing on a wet surface or while standing in water. Do not use outdoors or in wet conditions.
When positioning or moving the appliance, ensure that it is not turned up side down or unleveled greater
than 45°
Never pull the power cord to disconnect it from the outlet. Grasp the plug and pull it from the outlet.
Never lift, carry or drag the appliance by the power cord.
This appliance is designed for household, non-commercial use only. Any other use will void the warranty.
Do not plug into the power outlet before set up is completed.
Do not move this appliance without emptying it and securing the door in a closed position.
4
Parts
BWR-281DZ
1. Light
6. Door Sensor
2. Shelves (5)
7. Door Lock Latch
3. Door Handle
8. Bottom Grille
4. Control Panel
9. Cylinder Lock
5. Door
10. Leveling Legs (4)
5
Product Features
The Whynter built-in/undercounter dual temperature zone wine refrigerator offers premium quality and innovative design ideal for your wine collecting needs. Whether for the enthusiast or the connoisseur, the
Whynter built-in/undercounter dual temperature zone wine refrigerator provides premium and advanced wine
storage functionality.
This wine storage system (BWR-281DZ) can hold up to 28 standard 750ml wine bottles; 10 bottles in the top
zone and 18 bottles in the bottom zone. The powerful compressor cooling process offers optimum temperatures (low 40ºF to mid 60ºF) for red, white, and sparkling wines. The front ventilation design of this unit allows for flush with cabinet undercounter installation or simply freestanding usage.
The premium appeal of the BWR-281DZ features a substantial stainless steel trimmed door accented with a
luxurious curved handlebar. The five removable sliding shelves in the unit allows for customizable storage for
different types of bottles.















Capacity: 28 standard 750ml wine bottles
Upper Zone Capacity: 10 bottles
Lower Zone Capacity: 18 bottles
Dual zones for storing different wine varietals
Built-In Installation / Freestanding
Stainless steel trimmed glass door with sleek black cabinet
Luxurious curved handlebar
Open-door and malfunction warning system
Temperature memory function
Sabbath mode function
Tempered double-pane gray-smoked glass for enhanced UV protection
Soft white LED Interior Light with Function mode and Showcase mode
Powerful fan-circulated compressor cooling ensures precise temperature distribution
Reversible door swing
Security Lock and key
Fahrenheit and Celsius degree optional temperature indicators
Five removable slide out wood-faced shelves
Shelf One through Five: 5 bottles capacity
Bottom section: 3 bottles capacity
TECHNICAL DATA
MODEL :
BWR-281DZ
Capacity
28 standard wine bottles
Voltage
115V/60Hz
Current
1.6A
Input Power
130W
Power Consumption
1.0kWh/24h
Temperature Control Range
Upper Zone: 41ºF-50ºF/5ºC-10ºC
Lower Zone: 50ºF-65ºF/10ºC-18ºC
Net Weight
77 lbs
Gross Weight
82 lbs
Unit Dimensions
34.5" H x 15" W x 23" D (24.75" D
with handle installed)
Packaging Dimensions
39" H x 19" W x 28" D
6
Installation
IMPORTANT SAFETY INSTRUCTIONS
WARNING

To reduce the risk of fire, electrical shock, or injury
when using your appliance, follow these basic precautions:
Read all instructions before using the appliance.
 DANGER or WARNING: An empty wine refrigerator can be a hazardous for children or small
pets. If disposing of the wine refrigerator, remove gasket seals, latches, lids or the entire door from
your unused appliance, or take other action to ensure the wine refrigerator is harmless.

Never allow children to operate, play with, or crawl inside the appliance.

Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire hazard or
explosion.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE

Remove the exterior and interior packing.

Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

Install the handle on the door.
INSTALLATION OF YOUR APPLIANCE

The appliance is designed for built-in, recessed or freestanding installation.

WARNING: Do not store or install the appliance outdoors.

CAUTION: This appliance is designed for storing and cooling wines. Do not store perishable food, medicine or
other medical products.

Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.

We do not recommend installing the appliance on carpet.

To level your appliance, adjust the leveling legs at the bottom of the appliance if needed.

For freestanding installation, 5 inches (127mm) of space between the back and sides of the appliance are
suggested, which allows the proper air circulation to cool the compressor and condenser. Even for built-in installation, it is a must to keep a ¼” (6.35mm) space on each side and at the top. And the air vent at the front of
the appliance must never be covered or blocked in any way.

NOTE: Do NOT install the appliance near an oven or other heating source. Direct sunlight may affect the
acrylic coating and heat sources may increase electrical consumption. For best performance, do not install the
appliance behind a cabinet door or block the base grille.

Avoid locating the appliance in area that may be exposed to excessive moisture.

Plug in the appliance into an exclusive, grounded wall power outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding
should be directed toward a qualified electrician or an authorized service center.
7
Installation
BUILT-IN CABINET INSTRUCTIONS
These appliances are designed for both built-in or freestanding installation. For built-in installation, ensure
proper service access and ventilation, allow at least ¼” (6.35mm) space on each side and at the top.
CABINET OPENING DIMENSIONS (minimum)
BWR-281DZ
Width
17”
Depth
24.5” + 2” handle
Height
34.5”
ELECTRICAL CONNECTION
WARNING: Improper use of the grounded plug can result in the risk of electrical shock. If the power
cord is damaged, have it replaced by a qualified electrician or contact Whynter Service Department
This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have
the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. The
cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury.
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by
pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace
immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows
cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to
damage the power cord.
EXTENSION CORD
Because of potential safety hazards, it is strongly recommended that you do not use an extension cord with
this appliance. However, if you must use an extension cord, it is absolutely necessary that it be a UL/CULListed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the
electrical rating of the cord be 115 volts and at least 10 amperes.
INSTALLING STAINLESS STEEL HANDLES
This appliance includes stainless steel handles that are not
required to operate this appliance. To install the handles
please follow the below instructions:
1. Remove door gasket. The gasket can be easily displaced
by hand, no tools are necessary.
2. Use a flat-head screwdriver to remove the two preinstalled decorative plugs from the back of doors. Some wine
refrigerators have no decorative plugs.
3. Install the handles tightly as shown with two screws, lock
washers and flat washers provided. (DO NOT over tighten as
this will cause damage to the handles and stainless steel
door frames).
4. Replace the door gaskets to its original position.
8
Installation
REVERSING THE DOOR SWING OF YOUR WINE REFRIGERATOR
This appliance has the capability of the door opening from either the left or right side. The appliance is delivered to you with the door opening from the left side. Should you desire to reverse the opening direction,
please follow the following reversal instructions.
1. Remove the front ventilation grille (2) and the adjustable ventilation grille (1) by unscrewing the screws
(3) & (4). (Figure 1)
2. Remove the bottom hinge plate (5) by unscrewing the four lock screws (6). Be careful to hold the glass
door firmly after removing the screws. (Figure 2)
3. Gently pull down to remove the glass door from the right top hinge and place it on a padded surface to
avoid the risk of damage, then remove the right top hinge (7). (Figures 3 & 4)
4. Unscrew and transfer the hinge pin of the bottom hinge plate (5) to the opposite side.
5. Pop out the cover caps on the upper left side corner of the inside cabinet and use them to cover the
screw holes on the right hand side.
6. Screw the alternative left top hinge (9), included in the fittings, on the left hand side of cabinet. (Figure 4)
7. Rotate the door 180° and then relocate the door to the designated position. Then screw the bottom hinge
assembly on the left designated position and tighten it after the door is leveled. (Figure 2)
8. Reassemble the ventilation grilles.
9
Operation and Controls
It is recommended you install the appliance in a place where the ambient temperature is between 72º- 78ºF /
23º-26ºC. If the ambient temperature is above or below recommended temperatures, the performance of the
wine refrigerator may be affected. For example, placing your appliance in extreme cold or hot conditions may
cause interior temperatures to fluctuate.
NOTE:

When using the wine refrigerator for the first time or restarting after being shut off for a long period of time,
there may be a few degree variance between the set temperature and the LED readout. This is normal
due the length of activation time. The unit should return to normal after running for a few hours. For model# BWR-281DZ, this unit will not raise its internal temperature if the ambient temperature where the unit
is located is lower than the set temperature
RECOMMENDED TEMPERATURE SETTINGS
Conservation
49 - 57ºF
10 - 14ºC
Red Wines
58 - 72ºF
15 - 22ºC
Dry/White Wines
48 - 57ºF
9 - 14ºC
Rose Wines
49 - 51ºF
10 - 11ºC
Sparkling Wines
40 - 47ºF
5 - 8ºC
CONTROL PANEL GUIDE

POWER
To turn the appliance on/off, press and hold the
key for 5 seconds. Pressing the
can switch off the audible alarm when the alarm is on.

key once
UP
To increase (warm) the set temperature by 1°C or 1ºF.

DOWN
To decrease (cool) the set temperature by 1°C or 1ºF.

LIGHT
Used to turn the internal light on/off.

DISPLAY
is for UPPER temperature zone and
is for LOWER temperature zone.
ºF/ºC SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
10
Operation and Controls
NOTE: If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3 -5
minutes before restarting the appliance. If attempted to restart before this time delay, the appliance may not start.
SETTING THE TEMPERATURE CONTROL
•
During normal operation, the temperature display on the control panel shows the temperature inside the appliance.
•
The unit has two separate temperature zones. The temperature range of the UPPER zone is between 41ºF and
50ºF (5ºC and 10ºC) and the LOWER ZONE is between 50ºF and 65ºF (10ºC and 18ºC)
•
When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults. The
preset temperature for the UPPER temperature zone is 43ºF (6ºC) and for LOWER temperature zone is 54ºF
(12ºC).
•
You can press the left side UP and DOWN keys to control the internal temperature of the UPPER temperature
zone and press the right side UP and DOWN keys to control the internal temperature of the LOWER temperature zone.
•
The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once and will decrease
1ºC or 1ºF if you press the DOWN key once. The display flashes while you make the setting.
•
After the temperature has been set, the display will flash four times before it shows the current internal temperature of the particular temperature zone.
•
To view the set temperature at any time, press the UP or DOWN key, the set temperature will temporarily flash
in the display for 5 seconds. Then the display shows the current internal temperature
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous temperature settings. When the power has restored, the temperature display will show the current cabinet temperature.
DOOR ALARM
If the door has been left open for more than 60 seconds, the alarm will sound. The alarm will stop by closing the
door.
INTERIOR LIGHT
The interior light makes it easy to view your wine labels. The light will turn on when the door is open and turns off
when the door is closed. The light can also be turned on or off using the light button on the display.
SABBATH MODE
Sabbath mode is available for the observance of certain religious holidays. This mode turns off the displays, interior light and audible alarms and prevents them from turning on again. Normal cooling operations will still take place.
To initiate Sabbath mode, press and hold the POWER and LIGHT keys at the same time for at least 5 seconds.
The indicator light will flash four times and confirm the Sabbath mode is ON. Sabbath mode can be exited by repeating the above process. The Sabbath Mode will automatically exit after 96 hours.
CABINET SHELVES
NOTE: Do not cover any part of the shelves with aluminum foil or any other material that will prevent adequate air
circulation within the cabinet.
This appliance is equipped with removable shelves. To prevent damage to the door gasket, make sure the door is
opened completely before pulling the shelves out.
11
Operation and Controls




For easy access of the wine bottles, you must pull the shelves approximately ⅓ out of the railing.
The shelves are designed with an emergency stop to prevent them being removed too far when loaded.
When removing the shelves out of the railing, make sure to remove all items first.
To remove the shelves, pull the shelf forward until the notch aligns with the plastic post. Lift the shelf and
continue to pull the shelf forward until it is completely removed from the internal compartment.
NORMAL SOUNDS
The unit is cooled by a compressor. The compressor pumps coolant through the cooling system, producing
operating noise. Even when the compressor cuts out, noises caused by changes in temperature and pressure
are unavoidable. Operating noise will be most audible immediately after the compressor comes on. It becomes quieter as the operating period continues.
The following noises are normal and occur from time to time:

Gurgling sound, caused by the refrigerant flowing through the appliance’s coils,

Humming noise made by the compressor. This noise can get louder for brief periods when the motor is
switching on.

Cracking/popping sounds, resulting from the materials contraction and expansion due to temperature variations,

Fan operating sound, to circulate the air within the wine cabinet.

Unusual noise is normally the result of improper installation.

Where the unit is installed in open-plan kitchen or in partition walls, the level of operating noise will be
heard more acutely. However, this is due to the surrounding architecture and not to the unit.
NOTE: An individual’s perception of noise is directly linked to the environment in which the unit is located, as well the specific type of models. Our appliances are in line with international standards for such appliance and in line with the latest technical developments. Please remember that the noise of the compressor
and the coolant circulating in the system is unavoidable.
DEFROSTING AND VENTILATION
Your wine refrigerator is designed with an automatic defrost system. During off-cycle, the evaporator behind
the rear wall of the unit defrosts automatically. Condensation is collected in the drain at the back of the unit
and flows through the drainage hole into the drip tray above the compressor. The heat is transferred from
compressor and evaporates any condensation that has collected in the drip tray. Part of the remaining water
within the wine refrigerator is collected for humidity purposes.
NOTE: Frost may accumulate on the evaporator if the unit is repeatedly opened in a high heat or high
humidity location. If this frost pattern does not clear within 24 hours, your unit will require manual defrosting.
12
Storage
DOOR LOCK
The appliance is provided with a lock and key combination. The keys are located inside the plastic bag that holds
the User Manual. Insert the key into the lock and turn it counterclockwise to unlock the door. To lock the door do
the reverse operation making sure metal pin is engaged completely. Remove the key and place it in a secure
place.
STORAGE
Wine bottles may differ in size and dimensions so the actual number of bottles can be stored may vary. The 28
bottle capacity are approximate maximums when storing traditional Bordeaux 750 ML bottles and includes bulk
storage.
You may load your wine bottles in single row or by stacking while taking note of the following: if you do not have
enough bottles to fill your wine refrigerator, it is better to distribute the load throughout the wine refrigerator so as
to avoid “all on top” or “all below” type loads.

You can remove or relocate adjustable shelves to accommodate larger type of bottles (see removing shelves)

Keep small gaps between the walls and the bottles to allow air circulation.

Do not over load your wine refrigerator

Avoid obstructing the internal fans (located inside on the back panel of the wine refrigerator).

Do not try to slide the shelves outwards beyond the fixed position to prevent the bottles from falling.

Do not pull out more than one loaded shelf at a time as this may cause the wine refrigerator to tilt forward if
not properly installed.
REMOVING SHELVES
 This appliance is equipped with 5 removable shelves. To prevent damage to the door gasket, make sure the
door is opened completely before pulling the shelves out.

For easy access of the wine bottles, you must pull the shelves approximately ⅓ out of the railing.

When removing the shelves out of the railing, make sure to remove all items first.

To remove the shelves, pull the shelf forward until the notch aligns with the plastic post (approximately half
way forward) on each side of the shelf track.

Lift the shelf until both notches pass through the posts.

Continue to pull the shelf forward until it is completely removed from the inner compartment.
13
Care and Maintenance
CAUTION: Failure to unplug the appliance during service could result in electrical shock or
personal injury.
CLEANING YOUR APPLIANCE
 Turn off the power, unplug the appliance, and remove all items including shelves.
 Wipe the interior with a warm water and baking soda solution. The solution should be about 2 tablespoons of
baking soda to one quart of water.
 Wipe the shelves with a mild detergent solution.
 Wipe the outside cabinet with warm water and mild liquid detergent.
 Do not use steel wool or steel brush on the stainless steel. These will erode the stainless steel and rusting
may occur.
CAUTION: Failure to unplug the appliance could result in electric shock or personal injury
PREMISES POWER FAILURE

In the event of a power interruption, all previous temperature settings are automatically memorized. If power
is interrupted (power surge, breaker switch, etc.) and then powered up again, the unit will operate with the
last temperature set-point.

Most power failures are corrected within a few hours and should not affect the temperature of your appliance
if you minimize the number of times the door is opened. If the power is going to be off for a longer period of
time, you need to take the proper steps to protect your contents.
VACATION TIME

Short vacations: Leave the appliance operating during vacations of less than two days

Long vacations: If the appliance will not be used for an extended period, remove all items and turn off the
appliance. Clean and dry the interior thoroughly.
MOVING YOUR APPLIANCE

Remove all items inside the appliance.

Securely tape down (we recommend using painter’s tape) all loose items (shelves) inside your appliance.

Turn the adjustable leg up to the base to avoid damage.

Tape (we recommend using painter’s tape) the door shut.

Be sure the appliance stays secure in the upright position during transportation and protect the exterior of
appliance with a blanket, or similar item.
ENERGY SAVING TIPS

The appliance should be located in the coolest area of the room, away from heat producing appliances, and
out of any direct sunlight.

Ensure that the appliance is adequately ventilated. Never obstruct the air vents.

Close the door tightly and do not open the appliance too frequently or for a long period of time.

Store the content in an organized way

Do not over-fill the appliance to allow air to circulate
14
Troubleshooting
Problem
The appliance does not operate
The appliance is not cold
enough
The appliance turns itself on
and off frequently
The appliance makes too
much noise
Possible Causes

There is a power failure

The appliance is not plugged in

A house fuse has blown or the

Replace the broken fuse or reset the
breaker

The set temperature too high

Adjust the set temperature

The appliance is placed too close
to a heat source

Keep the appliance away from sunshine or other heat sources

The door is opened too often


The door is not closed completely
Close the door tightly and do not open
the door too frequently or for a long
period of time

The door gasket does not seal
properly


The front bottom grille does not
Ensure the door gasket is not loose.
The front bottom grille must be completely unobstructed

The ambient (room) temperature
is too low or high

Decrease or increase the ambient
(room) temperature

A large amount of contents has
been added to the appliance


The door is opened too often
To minimize internal temperature fluctuation, do not add large amount of
contents at once

The door is not closed completely


The door gasket does not seal
properly
Close the door tightly and do not open
the door too frequently or for a long
period of time

Ensure the door gasket is not loose

The noise may come from the

flow of the refrigerant and expansion of the inside walls may cause
popping and crackling noises

Contraction and expansion of the
inside walls may cause popping
and crackling noises
The appliance is not level

The door was reversed and not
properly installed

The shelves are out of position
15
It is normal that as each cooling cycle
ends, you may hear rattling or gurgling
sounds caused by the flow of refrigerant in the appliance. The high efficiency compressor may make a pulsating
or high pitched sound

Some popping or cracking noises are
normal. They are caused by expansion
and contraction of the inside walls due
to temperature changes

Make sure the unit is on a hard and
level surface. Do not place the appliance on carpet

Make sure the wine refrigerator is on a
hard and level surface. Avoid placing
the appliance on a carpeted or soft
surface

Correctly install the shelves
The appliance is not level

Ensure the appliance is plugged in and
the power outlet has power


The door does not close
properly
Solutions
Troubleshooting
Problem
Display “E0”, “E1”. “E2”,
“E3”, “E4”, “E5”, “E7”, or
“ED”
The alarm sounds and the
temperature display flashes
The icon “--” is lit up and
flashing in the temperature
display
Possible Causes
Solutions

“ED” indicates that the door has
been left open for more than 60
seconds

Close the door

“E0” indicates the communication
error for 3 zone models

Call for service

“E1” or “E2” indicates that the air
temperature sensor is failed

“E3” or “E4” indicates that the defrost sensor in the evaporator is
failed

“E5” indicates the defrost heater
failure

“E7” indicates the door switch
failure

Door has been opened for more
than 60 seconds

Close the door

The appliance door being opened
too often

Do not open the door more often
than necessary

The ventilation opening being
covered or too dusty

Clear the obstructions and clean the
dust

A lengthy interruption to the power 
supply

A large amount of bottles has
been added to the unit

The display temperature is out of
the range
16

Leave the appliance to work for a
while until the set temperature has
been reached.
Only temperatures within the range
16 - 99°F/ -9 - 37°C the appliance
can display will be shown. If the temperature is not within this range, the
icon “--” will be displayed instead.
That is normal
ONE YEAR LIMITED WARRANTY
This WHYNTER product is warranted to the original owner, purchased from an authorized Whynter dealer within
the 48 U.S. continental states, for one year from the original purchase date against defects in material and
workmanship under normal residential usage. Should your WHYNTER product prove defective within one year
from the date of purchase, contact Whynter’s Customer Support Team with the serial number and proof of
purchase to make a warranty claim. A Return Authorization Number must be issued before returning any parts or
products. Parts or products received without a Whynter issued Return Authorization Number will be refused.
Under this warranty, Whynter will repair or replace any parts found defective with new or remanufactured parts
or exchange the defective product with a new, refurbished, or remanufactured product at our discretion. All
defective products and parts covered by this warranty will be repaired or replaced on a mail-in basis to Whynter’s
Service Center. This warranty is not transferable. After the expiration of the warranty, the cost of labor and parts
will be the responsibility of the original owner.
Return freight is prepaid by Whynter within two months of purchase. After two months to one year, the customer
will be responsible for the return freight cost to Whynter’s Service Center. Please package the product carefully
in its original packaging to avoid damage in transit. Whynter is not responsible for damage resulting from shipper
mishandling or improper packaging. Please retain the original box and packaging materials.
THIS WARRANTY DOES NOT COVER:
• Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes.
•
Improper power supply such as power surge, low voltage, defective household wiring or inadequate
fuses.
•
Use in commercial or industrial applications.
•
Damage, accidental or otherwise, to the WHYNTER Beverage Refrigerator while in the possession of
a consumer not caused by a defect in material or workmanship
•
Damage caused by consumer misuse, tampering, or failure to follow the care and special handling
provisions in the instructions.
•
Damage to the finish of the case, or other appearance parts caused by wear.
•
Damage caused by repairs or alterations to the product by anyone other than authorized by the
manufacturer.
•
Removal, Replacement Packaging, Freight and Insurance cost for the warranty service.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR
REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD
ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN
LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO
THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
The warranty, product contents and specifications are subject to change at any time without notice;
please refer to www.whynter.com for the most current information.
To register your warranty, please visit www.whynter.com and fill out the online Warranty Registration
form. Please be sure to include a copy of your purchase invoice.
To obtain service or information, contact Whynter LLC via email at [email protected] or call
866-WHYNTER (866-949-6837).
Copyright © 2017 Whynter LLC - V 20180219-1037
www.whynter.com
17