DCS IVSUR26 IVSUR Utensil Rail Install

UTENSIL RAIL - IVSUR26
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS:
1. Remove 4 screws (2 of both sides, left and right) from hood by hand ( Fig. 01). Do not scratch panel.
2. Drive 4 utensil rail caps supplied with kit into nut inserts on the hood (2 of both sides, left and right)
(Fig. 02).
3. Insert utensil rail into caps on hood and tighten with Allen wrench provided (Fig. 03).
Screw
Utensil Rail Cap
Fig. 01
Fig. 02
Fig. 03
Fig. 04
5900 Skylab Road, Huntington Beach, CA 92647
Tel: 714.372.7000 • Fax: 714.372.7001
Customer Care: 888.281.5698
www.dcsappliances.com
P/N 17606 Rev. A 12/04