LG ZRTBS01 Specifications Sheet

Job Name/Location:
Date:
Tag #:
For:
PO No.:
Architect:
GC:
Engr:
Mech:
File
Resubmit
Approval
Other
Rep:
(Company)
(Project Manager)
ZRTBS01
Remote Temperature Button Sensor for Cassette
and Ducted IDUs
Surrounding Conditions:
Unit Data:
Operating Temperature
‐40 – 221° F
Storage Temperature
‐40 – 221° F
Humidity
0 – 100%, non‐condensing
Temperature
Output:
Accuracy:
Connectivity:
Cable
Length:
Size:
Insulation:
Dimensions
Installation Hole Diameter
Max Sensor Diameter
Sensor Length
50 ft with CN‐ROOM connector (included)
22 AWG X2
Etched Teflon, Plenum Rated
Notes:
1. Must follow installa on instruc ons in the applicable LG installa on manual.
7/16 in
0.88 in
0.60 in
Resistance
±0.36 °F
Standard Features
• Small flush sensor mounting
• Accurate direct air measurement
• Paintable with latex or oil base
• Replaces IDU return air sensor for remote sensing
• Connects to CN‐ROOM on IDU PCB
• Compatible LG indoor units: All casette and ducted IDUs for
Multi V, Multi F, Multi F MAX, and Single Zone
For continual product development, LG reserves the right to change specifications without notice.
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp. /www.lghvac.com
SB_Button_Temp_Sensor_ZRTBS01_10_15
Page 1 of 1