Panasonic DMCF1B Operating Instructions

PDF
Document
 Panasonic
Digital Camera
Operating Instructions
| Coe Before use, please read these
- | . ™ a. instructions completely.
- LEICA
DC VARIO-ELMARIT
(For UK Customers
STAT
vn
HLT
( Web Site: http:/Avww.panasonic.co.uldindex.html )
VOTOB92
Safety
Dear Customer,
We would like to take this opportunity to
thank you for purchasing this Panasonic
Digital Camera. Please read these
Operating Instructions carefully and keep
them handy for future reference.
Information for
Your Safety
WARNING
TO REDUCE THE RISK OF FIRE OR
SHOCK HAZARD AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES
AND DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE THE
COVER (OR BACK); THERE ARE
NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Carefully observe copyright laws.
Recording of pre-recorded tapes or
discs or other published or broadcast
material for purposes other than your
own private use may infringe copyright
laws. Even for the purpose of private
use, recording of certain material may
be restricted.
* Please note that the actual controls and
components, menu items, etc. of your -
Digital Camera may look somewhat
different from those shown in the
Nustrations in these Operating
Instructions.
Operating Instructions
* Windows is a trademark or registered
trademark of Microsoft Corporation
U.S.A.
&laquo; SD Logo is a trademark.
&laquo; Leica is a registered trademark of Leica
microsystems IR GmbH and Dicomar is
a registered trademark of Leica Gamera
AG.
&laquo; All other company and product names in
the operating instructions are
trademarks of their respective
corporations.
Files recorded on a MultiMediaCard or
SD Memory Card -
it may not be possible to play back the
files on this Movie Camera recorded on
and created by other equipment or vice
versa. For this reason, check the
compatibility of the equipment in advance.
Pages for reference
Pages for reference are indicated by
dashes either side of a number, for
example: (P00)
Use only the recommended
accessories.
Satety
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE
EQUIPMENT AND SHALL BE
EASILY ACCESSIBLE.
CAUTION
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according
to the manufacturer's instructions.
Digital Camera
The rating plate is on the underside of the
Digital Camera.
AC Adaptor
* The rating plate is on the underside of
the AC Adaptor.
* As this equipment gets hot during use,
operate it in well ventilated place; do not
install this equipment in a confined
space such as a bookcase or similar
unit.
Caution for AC mains lead
For your safety, please read the following
text carefuily.
This appliance is supplied with a moulded
three-pin mains plug for your safety and
convenience. &Agrave; 5-ampere fuse is fitted in
this plug.
Should the fuse need to be replaced,
please ensure that the repiacement fuse
has a rating of 5-amperes and it is
approved by ASTA or BS! to BS1362.
Check for the ASTA mark @ or the BSI
mark Y on the body of the fuse.
If the plug contains a removable fuse
cover you must ensure that it is refitted
when the fuse is replaced. If you lose the
fuse cover, the plug must not be used until
a replacement cover is obtained. A
replacement fuse cover can be purchased
from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE
+ FUSE SHOULD BE REMOVED AND THE
PLUG CUT OFF AND DISPOSED OF
SAFELY.
THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF
PLUG IS INSERTED INTO ANY 13-
AMPERE SOCKET.
If a new plug is to be fitted, please
observe the wiring code as shown below.
If in any doubt, please consuit a qualified
electrician.
Jl IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
Blue: Neutral
Brown: {ive
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal in the plug
which is marked with the letter N or
coloured BLACK.
The wire which is coloured BROWN must
be connecied to the terminal in the plug
which is marked with the letter L or
coloured RED.
Under no circumstances should either of
these wires be connected to the earth
terminal of the three-pin plug, marked with
the letter E or the Earth Symbol .L.
EN Before Use
Remove the Connector Cover as follows.
PRE
Cm a
EN How to replace the Fuse
1 Remove the Fuse Cover with a
screwdriver.
&copy;
x Ё
7 e
+ nn
yt pe ER
PAR Le [a “at
Tg
ERA
Contents
Safety
Information for Your Safety ...................2
Preparation
Standard Accessories ...................e.eceean. 6
Names of the Components ...................8
LCD Monitor Display ....ннннннанненыннннее 10
Quick Guide | 12
Charging the Battery .............—..—.—.... 18
Inserting the Battery 14
Connecting to an Electrical Outlet........ 16
Inserting the Card | 17
Turning Power on/oft............................19
Attaching the Strap 20
Using the LCD Monitor...................... 21
Using the Optical Viewfinder ................
The Shutter Button
(Pressing halfway/Pressing fully)
The Mode Dial 24
Operating the Menu 25
Setting the Date/Time (Clock Set)..... 26
Recording images (basic)
Taking Pictures
Taking Pictures in Simple Mode........
Checking the Captured Picture
(Review)
Recording Motion Images ...................
Using the Optica! Zoom
Using the Digital Zoom
Taking Pictures using the Built-in
Flash
Using the Continuous &Agrave;F
Taking Pictures with the Self-timer....
Recording images (advanced)
Taking Pictures with Audio .................. 38
Changing the Picture Size ............— 39
Changing the Quality
(Data Compression Ratio) ............... 40
Taking Pictures using
Macro Mode 41
Taking Pictures using
Portrait Mode 42
Taking Pictures using
Landscape Mode 43
Taking Pictures using .
Night Portrait Mode... 44
Taking Pictures using
Colour Effect Mode............——..—.... 45
Taking Pictures using Spot Mode ........ 46
Compensating the Exposure ............... 47
Taking Pictures using
Auto Exposure (AE) Bracket............ 48
Using the AF/AE LocK..…..….….…..…….…ssaress 49
Picture Adjustment
(Natural/Standard/Vivid) ..........——... 50
Setting the White Balance ................. 51
Setting [SO Sensitivity ne 53
Taking Pictures using Burst Mode....... 54
Playback |
Playing Back Still Pictures.................... 55
Playing Back Still Pictures with
Audio 5 56
9 Images Multi Playback...................... 57
Using the Playback Zoom ..............—.. 58
Playing Back Motion Images …….…… 59
Editing
Deleting Images 60
Writing the Print information to the
Card (DPOF Setting) ................— 62
Protecting Images on the Card............ 65
i
:
+
&pound;
z
2
4
Technical use
Playing Back with Slide Show
{Automatic Playback) ....................... 66
Adding Audio to Recorded Pictures
(Audio Dubbing) 68
Resizing Recorded Pictures................. 69
Trimming Recorded Pictures................ 70
Formaiting the Card 71
Adjusting the LCD Monitor
Brightness 72
Using the Auto Review... 73
Setting up the Operational Sound
{Shutter Sound 74
Setting up the Power Save Mode.........
Resetting the File Number ................... 76
initializing the settings 77
Playing Back Images with a TV
Monitor 78
Connecting to a PC 79
USB DIRECT-PRINT ....................—.—. 80
USB DIRECT-PRINT |
(Single Picture) „...81
USB DIRECT-PRINT (DPOF) ............ 82
After Use .. 83 |
Others
The Menu Rems 84
Cautions for Use 86
Warning indications 90
Troubleshooting 91
Specifications Ze 92
EA Le Ts ng A,
Preparation
Standard Accessories
Before using your camera, check the contents.
1 SD Memory Card (16MB) 6
RP-SD0o168
(In the text, it is indicated as &quot;Card”)
2 Battery Pack
CGA-SOO1TE
(in the text, it is indicated as “Battery”)
3 Battery Charger/AC Adaptor
DE-929B
(in the text, it is indicated as
“AC Adaptor”) 8
4 AC Mains Lead
K2CT3DAD0003
5 DC Cable
K2GJ2DC00005
A/V Cable
K1V204Ci0001
USB Connection Cable ’
K1HA05CD0002
CD-ROM
VFFO184
Strap
VFC3952
| Preparation
EN For United Kingdom and
Republic of Ireland
WwWw.panasonic.co.uk
(for UK customers only)
&raquo; Order accessory and consumable items
for your product with ease and
confidence by telephoning our Customer
Care Centre Mon-Friday 9:00am-
5:30pm. (Excluding public holidays.)
= Or go on line through our Internet
Accessory ordering application.
* Most major credit and debit cards
accepted.
&laquo; All enquiries transactions and
distribution facilities are provided directly
by Panasonic UK Lid.
* It couldnt be simpler!
Customer Care Centre
For UK customers: 08705 357357
For Republic of Ireland customers: 01
289 8333
Technical Support
For UK customers: 0870 1 505610
This Technical Support Hot Line
number is for Panasonic PC software
related products only.
For Republic of Ireland, please use
the Customer Care Centre number
listed above for all enquiries.
For all other product related
enquiries, please use the Customer
Care Centre numbers listed above.
a
нтерагапоп
Names of the Components
[Front View]
=&gt; &copy;) Сл + 52 О =
8
9
10
11
12
14
15
16
18
19
20
21
22
23
24
25
17
Flash Sensor (P35)
Flash
Lens
Seli-timer Indicator {P37)
Lens Barrel
Strap Eyelet (P20) -
Lens Gover
[Top View]
Microphone (P31, P38, P68)
Mode Dial (P24)
Single/Burst Mode Button (P54)
Shutter Button (P23)
Power Switch (P19)
13 Zoom Button (P32, P33)
[Back View ]
Optical finder (P22, P27)
Status indicator (P19)
Flash/Access Indicator
(P18, P19, P35)
Speaker (P56)
DISPLAY Button (P21)
LCD Monitor (P10, P21)
MENU Button (P25)
Delete Button (P30, P60)
&laquo;/Self-timer Buiton (P37)
Y /REVIEW/SET Button (P30)
&raquo; /Flash Mode Button (P34)
A [Exposure Compensation
(P47)
{Auto Bracket Button (P48)
. &laquo;map Lal rah LA жило ла
i ui ni A ira: RE ли СНЫ ВЫ hii e hr: Fi ihe os RESTE TO PESTE CLS Po TT ue ;
UE.
Preparation
[Left View]
26 A/V QUT Socket (P78)
27 USB Socket (Spin) (P79)
28 Terminal Door
[Right View]
29 DC IN Socket (P16)
30 Memory Card/Battery Door
(P14, P17)
31 DC iN Terminal Door (P16)
[Bottom View] |
32 Tripod Receptacle
[Battery Charger/AC Adaptor]
AC Input Terminal
[POWER] Indicator
[CHARGE] Indicator
Battery Attachment Section
DC Output Terminal
th da 0 o +
TR DE MET e MEAN AAA EL Ale DE NT
TE A EA EA A CA e ПИН
DAL LE NA М NI PEL ELA
ET TACA пли EI NN I PE I I RR Le, AS
er
Preparation
Preparation
LCD Monitor Display
[In recording]
REC mode (P24)
чо сов оо № —
19
Current date and time (P26)
&laquo; &Icirc;t is displayed for about 5 seconds
after tuming on the power or setting
a&ntilde;il
#
voir
A бн
1 BH
10:00 1 JAN 200 MEMES
[In recording in Simple mode]
1 Flash mode (P34)
2 Burst mode (P54)
4
5
6 Battery indicator (P15)
7 Frame remain
8
9
7
BX . 9
L
[in playback]
1 Playback mode
2 DPOF (P62)
Flash mode (P34) the clock
White balance (P51) 20 &quot; . Spot AF area (P46) en lication Ce) ule, for printi
ISO sensitivity (753) на ЭР Shutter Jiggle alert (P28) FY Green) 9 printing |
Picture size (P39) 21 =f: Spot metering target (P46) Picture mode (P29) DPOF setting for Slide Show
ED (Green with DPOF number):
Quality (data compression ratio) (P40) 22 Focus indication (P27) RO _
F setti &laquo;ae Co PU
Battery indicator (P15) 23 Burst mode (P54) Side Shan lorpriningand” =
display ны AC adaptor this is not 24 Colour Effect mode (P45) Zoom (P32) Protected image (P65)
в CL
25 ecording indication Image with audio (P56)
8 Frame/Time remain
in motion image mode: XXXs
9 Shutter Jiggle alert (P28)
10 Recording indication
11 Audio REC (P38)
Continuous AF (P36)
10 Self-timer mode (P37) .
11 Card access indication (P18)
12 AF area (P27) —”
13 Current date and time ( P26)
Picture size (P39)
Quality (data compression ratio} (P40)
о hw
HH : In motion image mode
In simple mode:
. * [tis displayed for about 5 seconds .
12 Zoom (P32, P33) after turning on the power or setting (MI :ENLARGE
(digital zoom ON: [m) the clock. :4&quot;x 6&quot;/10x 15cm
[. J:INTERNET
13 Self-timer mode (P37)
14 Card access indication (P18)
15 AF area (P27)
16 Aperture indication/Shutter speed
indication (P27)
17 Exposure compensation (P47)
18 Auto bracket (P48)
7 Battery indicator (P15)
Folder/File number
Page/Total images
10 REC data
* It will be displayed when the
[DISPLAY] button is pressed.
11 Recorded date and time
10 11
Quick Guide
Preparation
Prepare following items
* Camera
&laquo; Battery
* Card
AC adaptor ;
* AC Mains Lead ;
* Check that the power switch is set to [OFF] and |
the lens is stored. |
[Preparation]
1 Charge the battery. (7) — &copy;) (P13)
Charging takes in about 20 minutes.
2 Slide the door in the direction of the
arrow to open the
Memory Card/battery door.
3 Insert the battery into the camera.
(P14) |
4 Insert the Card into the camera. (P17) i
5 Close the Memory Card/battery door. .
[Recording] ;
6 Set the power switch to [ON]. (P19) .
7 Set date/time. (P26) ;
8 Set the mode dial to Normal picture -
mode [2 ]- (P24) 2
9 Take a picture. (P27) ;
[Playback] ‘ 7
10 Set the mode dial to playback [3].
(P55) A
11 Press 4/P to select the picture you |
want to view.
12
EE
HT 3
Fret et
E A
E
FT ;];——]]]]— EE A E EEE tn gn |
Preparation
Charging the Battery
1 Connect the AC Mains Lead.
* The AC Mains Lead does not fit entirely into
the AC input terminal. A gap will remain as
shown below,
* The [POWER] indicator (4) lights.
2 Attach the battery to the AC adaptor.
(D — @) '
* The [CHARGE] indicator (9 lights and i
charging starts.
3 When the [CHARGE] indicator
turns off, charging is finished.
* Charging takes in 90 minutes.
4 Remove the battery fromthe AC ~~ i
adaptor.
* The battery cannot be charged when the DC cable is connected to the AC adaptor.
* After use, be sure to disconnect the AC Mains Lead.
* The battery becomes warm after use/charge or during the charge. The camera also ==
becomes warm during use. However, it is not malfunction. :
* The battery/AC adaptor supplied with this camera is exclusively designed for this camera.
Do not use with any other equipment.
a simo eo
Preparation
Inserting the Battery
[Preparation]
* Check that the power switch is set to [OFF]
and the lens is stored.
[Inserting the battery]
1 Slide the door to the direction of the
arrow to open the Memory Card/battery
door.
2 Insert the charged battery ali the way
in, until it is locked (3).
3 Close the Memory Card/battery door.
[Removing the battery]
4 Slide the door in the direction of the
arrow to open the Memory Card/battery
door.
5 Slide the lock &copy; in the direction of
the arrow to remove the battery.
6 Close the Memory Card/battery door.
&laquo; &Icirc;f you will not be using the camera for a long
time, remove the battery.
* When the fully charged battery is inserted in the
camera for more than &Agrave; hour, the clock setting is
memotized by the camera for about 24 hours
even after he batiery is removed. (The time may
be shorter if the battery is not charged
sufficiently)
When the clock setting is cancelled, please set
the date/time again. (P26)
* When the card is being accessed, do not remove
the battery. ;
* The battery supplied with this camera is
_ exclusively designed for this camera. Do not use
with any oth&eacute;r equipment.
* When removing the battery, be careful not to
drop it.
14
ET RER RE SCENE ES
E EA FEL — A 2
. = e EUA. Я
. T Ra
Preparation
EE Battery indicator
The remaining battery power is displayed on the LCD Monitor. (This is not displayed
when using AC adaptor)
: The battery power is sufficient
: The remaining power is a little low
JN
: The remaining power is low
= Recharge or replace the battery
KE Charging time and available recording time
Measured under the following conditions:
* Shooting once every 30 seconds, flash every other shot.
* Measured using supplied 16MB SD Memory Card.
* Temperature: 25&deg;C/Humidity: 60%
Continuous recording/playback time
Charging time
ging (recordable number)
Recording with LCD monitor on —
Approx. 60 min.
Supplied battery | Approx. 90 min. | (equal to 120 still pictures)
Recording with LCD monitor off ~ -
Approx. 75 min.
(equal to 150 still pictures)
Playback time
Approx. 70 min.
The times shown in the table are approximate times. The times may vary depending
on the condition. и
IE Charging environment and charging error
* Charge the battery in a place with a temperature of 10 - 35&deg;C. (The
the somo tempercuno pe (The battery should also be
* When charging starts, the [CHARGE] indicator lights. If, a&iacute;ter chargin
Jing ,- If, g starts, the
[CHARGE] indicator blinks at about 1 second cycles, this indicates a charging error.
In this case, remove the AC adaptor from the electrical outlet, remove the battery and check
if both room and battery temperature is too low or high and then charge it again. If the
problem persists, consult the dealer or your nearest servicentre.
15
Preparation
Connecting to an Electrical Outlet
If you use an AC adaptor as indicated in 3,
you can use the camera without worrying
about battery discharge.
[Preparation]
&raquo; Check that the power switch is set to [OFF]
and the lens is stored.
1 Connect the AC Mains Lead.
2 Open the DC IN terminal door M.
* It is a&iacute;so possible to connect the DC cable to
the camera with the Memory Card/battery
door opened.
3 Connect the DC cable (supplied) to
the camera.
+ The camera becomes warm during use.
However, this is not a malfunction.
+ Disconnect the AC adaptor and DC cable
when camera is not in use.
* The battery cannot be charged in the
camera with the AC adaptor connected.
* Use the supplied DC cable.
16
Preparation
Inserting the Card
[Preparation]
* Check that the power switch is set to [OFF]
and the jens is stored.
[Inserting the card]
1 Slide the door in the direction of the
arrow fo open the Memory Card/battery
door.
2 Insert the card all the way in until it
clicks.
* Check the direction of the card.
* Do not touch the connection terminals on the
back side of the card.
3 Close the Memory Card/battery door.
[Removing the card]
4 Slide the door to the direction of the
arrow to open the Memory Card/battery
door. -
D Press the card to release.
Oo
Pull the card out.
7 Close the Memory Card/battery door.
* If the Memory Card/battery door cannot be
compietely closed, take the card out and insert it
again.
* If the card cannot be fully inserted, verity whether
the direction of the card is correct.
* We recommend that you use a Panasonic
branded SD Memory Card. (Use only the
genuine card)
* IF the card is not fully inserted, the card may be
damaged.
17
Preparation
NN SD Memory Card (supplied) and
MultiMediaCard (optional)
EE Access to the card
When the card is being accessed, the
flash/access indicator (1) and card
access indication @) lights.
The SD Memory Card and
MultiMediaCard are small, lightweight,
removable external cards. The SD
Memory Card is equipped with a write
protection switch that can inhibit writing
and formatting. {When the switch is
moved towards the [LOCK] side, it is not
possible to write or delete data on the
card and format it. When the switch is
unlocked, these functions become
available.)
IE] SD Memory Card
&lt; RP-SDHS12 (512MB)
&raquo; RP-SDH256 (256MB)
-@ &laquo; RP-SD128BJ (128MB)
* RP-SD064B (64MB)
&laquo; RP-SD032B (32MB})
+ RP-SD016B (16MB)
* AP-SDODBB (8MB)
When the flash/access indicator (1) and
the card access indication 2) lights;
* Do not turn off the camera.
* Do not remove the battery or pull out the
MultiMediaCard
* VW-MMC16 (16MB)
&laquo; VW-MMC8 (8MB)
&laquo; After recording motion | оба
card. | images using the | di y
* Do not disconnect the DC cable when MultiMediaCard, the a
using ihe AC adaptor. flash/access indicator
and the card access indication may
appear for a while, but this is not a
malfunction.
The card and the card contents may be
destroyed and the camera may not
operate normally.
As there is a risk that the data on the
card may be damaged or erased due to е
the electrical noise, static electricity or
the defects of camera/card, please back
up your data on your PC using USB
connection. (P79)
18
Preparation
Turning Power on/off
1 Set the power switch to [ON].
* The Status indicator (7) lights.
2 Set the power switch to [OFF].
* When turn the power switch on, do not hold the lens cover. ff the lens cover does not open,
[SYSTEM ERROR] is displayed. Turn the power switch off and on.
+ When turning the power switch off, do not hold the lens cover. If the lens cover does not .
close, the power turns off with it opened. Turn the power switch on and off.
* When turning on the power in the recording mode, do not put any obstacle in front of the
fens. :
UN Status Indicator &reg; -
Lighting:
* When tuming the power switch to [ON].
Blinking:
* While the focus is being adjusted or the
focus is not propetly adjusted.
* When the card is not inserted.
* When no space is left on the card.
* When the remaining battery power is low.
(blink slowly}
EN Flash/Access Indicator
Lighting:
&raquo; When accessing the card.
&raquo; When the flash fires. (It lights when the
shutter is pressed halfway)
* When sending data to PC.
Blinking:
* When charging the flash.
* When setting the flash mode to forced off
and recording in dark places. (blink slowly)
19
Preparation
Attaching the Strap
1 Passt the top of the strap through the
strap eyelet (1).
2 Pass the opposite side of the strap
through its ring shaped part.
3 Puli the strap.
20
Preparation
Using the LCD Monitor
Every time you press the [DISPLAY] button,
the display of the LCD Monitor changes as
shown below.
Preparation Preparation
Using the Optical Viewfinder ~The Shutter Button
| (Pressing halfway/Pressing fully)
The shutier button is activated in 2 steps:
“pressing halfway” and “pressing fully”.
Parallax compensation mark
* [T you take a picture of the subject at a distance
between 70 cm - 120 cm with the zoom in tele
position, match the top and left of the subject with
the parallax compensation mark (1), in order not
to cut it. When an accurate framing is necessary,
use the LCD monitor.
Pressing halfway @&amp;)
* Focus and exposure are locked.
Pressing fully
* The picture is captured. In motion image mode,
the recording starts.
* You can adjust volume of the operational sound in the menu. (P74)
* If you press the shutter buiton fully in a single stroke, the captured picture may appear
shaken or unfocused. {The camera may be moved during capturing)
r
EC
fre
J
E
E
a.
a
TAC Ey E NTE TT = proie pre a a m— 4e :
EA fr SE EAN ah a ES ENT et de AA FO 7f . o : : . Mee ta er ; ce = ET - --'
- Arey i en LL Hy AT REE TS so - . . . “о —”” пробе: Felden nL Tex AAT LT er Ie EA IAE NE TA TE 02
; | JE . hr x М Da ON 1.8 WELLE Le TTT ee TET SRT DNA
4. r ‚я : : =
Ear
Preparation
The Mode Dial
You can choose a desired mode by the mode dial.
(&gt;) : Playback (P55)
Playback recorded images.
W : Simple made (P29) | -
You can take the pictures easily because the necessary setting menus are minimized.
This mode is for beginners.
&copy; : Normal Picture (P27)
The shutter speed and the aperture value are autornatically adjusted.
\ : Macro mode (P41)
When you take pictures from a distance closer than 50 cm, set the camera in macro
mode. This allows you to get closer to the subject up to 30 cm (Tele), 10 cm (Wide).
Y : Portrait mode (P42)
This mode allows you to easily achieve the depth of focus effect. The subject stands out
in front of an unfocused background.
aA : Landscape mode (P43)
You can capture sharp and crisp landscape photos easily. Please note that this mode is
suitable for landscape farther than 10 m away and in daylight.
LA: Night portrait mode (P44) —
When you take pictures of, for example, your friends in front of beautiful night
illumination scenery, this mode aliows you to get the appropriate exposure for your
subject as well as the background, using flash and slow shutter.
@ : Colour Effect mode (P45)
This function enables you to use colour effects such as bluish, reddish, and black and
white.
HA: Motion images (P31)
Use this mode when recording motion images.
24
Preparation
Operating the Menu
By operating the menu, you can set the
settings of REC or playback mode. You can
also set the date and time, the operational
sound and various other settings. Follow
these instructions.
[Preparation]
+ Set the mode dial to the recording mode
(except for [Q#]} or the playback mode.
1 Press the [MENU] button.
* If you set the mode dial (7) to the recording
mode, the REC menu is displayed; if you set
it to the playback mode, the playback menu
is displayed.
Press &gt;.
Press A/Y to choose the item.
Press 4/P to set the item.
non own
Press the [MENU] bution.
* The menu will disappear.
ESE)
ГЕ = |
wn BY
SE
SL ES He
25
Fg SEE
E
хм
oF
Preparation
Setting the Date/Time (Clock Set)
Su e alte] dl
IR RESET
TE TENA ns
hia Ls
rr mm LT
+
LANGUAGE
4,5
E
-
G) CLOCK SETIRR
10100! 1 НАМ 12003
- mf = o
SELECTO SET+ |
If the message [PLEASE SET THE CLOCK]
appears, set the date and time.
You can go to the setup menu by pressing the
[MENU] button while the message is
displayed.
You can set the year from 2002 to 2099. The
24-hour system is used. ——
1 Press the [MENU] button.
2 Press &gt; to make the setup menu
appear.
+ In simple mode, skip this step.
3 Press A/V to select [CLOCK SET],
and then press &raquo;.
4 Press A/V/&lt;4/P to set date and time,
and then press &raquo;.
5 Press A/V to select [M/D/Y], [D/M/Y]
or [Y/M/D].
Press the [MENU] button twice.
&raquo; The menu will disappear.
7 Check if the dateftime setting is
displayed correctly, after turning the
camera [OFF] and [ON].
&copy;
* When the fully charged battery is inserted in the
camera for more than 1 hour, the clock setting is
memorized by the camera for about 24 hours
even after the battery is removed. (The time may
be shorter if the battery is not charged
sufficiently)
When the clock setting is cancelled, please set
the date and time again.
26
CN ETA TIE TC CEC:
E
Recording images (basic)
Taking Pictures
By only pressing the shutter button, the
exposure (shutter speed and aperture value)
wil be automatically adjusted and the picture
will de taken.
[Preparation]
* insert the card. (P17)
* Set the power switch to [ON]. (P19)
1 Set the mode dial to normal picture
mode [Cy].
2 16) Optical finder]
Centre the subject in the AF target ()
inside the optical finder and press
the shutter button halfway.
[&reg; LCD monitor]
After centring the subject in the
AF area (2) on the LCD Monitor, press
the shutter button halfway.
. * When the focus is adjusted, the focus
indication [@] (3 appears.
* When the focus indication flashes, ihe focus с,
is not adjusted. Press the shutter button *
halfway to adjust the focus again.
* The shutter speed and the aperture value (9)
are automatically adjusted and displayed on
the LCD Monitor. 6
&raquo; When the subject is out of the AF area, use
the AF/AE lock. (P49)
3 Press the shutter bution fuily to tak
the picture. |
* After taking a picture, when the auto review
(P75) is set to [1 SEC. V3 SEC.], the picture
is displayed on the LCD Monitor for 1 or 3
seconds.
27
Recording images (basic)
* [f you do not press the shutter button halfway, shutter jiggle may occur or the focus may not
be adjusted properly.
+ Even when the focus indication is displayed and the focus is properly adjusted, it will be
cancelled if you release the shutter button.
Press the button haliway again.
* When power saving time is set, if you do not operate the camera for a while, it is
automatically turned off at the set time. To operate the camera again, press the shutter
button or turn the power switch first to [OFF] and then to [ON]. (P75)
* The brightness of the LCD Monitor may differ from that of the recorded pictures. In
particular, when taking pictures in dark places with a long time exposure, darkness appears
on the LCD Monitor, but the recorded pictures are bright.
* If the exposure is not properly set, the colour of the aperture value and the shutter speed on
the LCD monitor becomes red.
&laquo; in the following cases, the focus may not be adjusted properly.
1 Recording a scene including subjects both near and far
2 Recording a scene through dirty glass
3 Recording an illuminated subject
4 Recording in a dark place
5 Recording moving subject.
6 Recording a subject with a little contrast
7 Recording with shutter jiggle
* We recommend that you set the clock setting again before taking pictures.
-^
* When the brightness of the LCD monitor changes such as while zooming or panning, you
may hear a click sound from the lens or the image on the LCD monitor may change
suddenly; this is not a malfunction. The sound is caused by the camera automatically
adjusting the aperture value,
* When pressing the shutter button in low light/dark conditions, the LCD monitor display may
become bright or whitish. However, the recorded picture will not be influenced. This function
make it easy to adjust the focus.
About shutter jiggle
x
&raquo; Be careful to prevent shutter jiggle when you press the shutter buiton.
+ When the shutter jiggle can easily occur, the shutter jiggle alert (1) appears.
&raquo; We recommend you use a tripod when the shutter jiggle alert appears.
28
hes RB ER RT APR MEET
TEE EA je e da
PE AE EP
. ‚ 0x 205 &gt;
- ко e
- . “
Recording images (basic)
Taking Pictures in Simple Mode
* Offering simplified menu for ease of use.
* The picture size is easy to select.
* The icons on the display are shown larger.
We recommend you use this mode when you ask someone to take a picture.
1 Setthemode dial to Simple mode [Q].
2 _ Press the [MENU] button. |
3 Press A/V to select [PICT.MODE].
* [AUTO REVIEW] (P73)
* [BEEP] (P74)
* [CLOCK SET] (P26)
4 Press &lt;P&gt; to select [ENLARGE],
[4&quot;x6/10x 15cm] or [INTERNET].
ENLARGE 2048x1536 | Fine
4&quot;x6&quot;H0x15cm | 1280960 Fine
INTERNET 540 x 480 - Standard
* [INTERNET] is for setting image size to
send v&iacute;a e-mail or mobile phone using:
SD Memory Card. o
5 Press the [MENU] button.
6 Take a picture.
* The recording method is the same asin
“Taking Pictures”. (P27)
* The burst mode is available only with the low speed. (P54)
. a qe distance between the camera and the object is beyond the recordable range (Tele:
cm - со , Wide: 10 cm - &laquo; ), the focus may not be adjusted |
indication (D is lit. ; ' Properly even ifthe focus
&laquo; The settings (except for the clock setting) of the simple mode will not b i
recording Modes g p will not be applied to ihe other
29
Recording images (basic)
Checking the Captured Picture ( Review)
7 DELETE SINGLE
DELETE THIS PICTURE?
SELECT 4+
СЕТ,
After taking a picture, when auto review (P73)
is set to [1 SEC./[3 SEC.], the captured
picture is displayed on the LCD Monitor for 1
or 3 seconds, but you can also check the
picture by following the methods shown
below.
1 After taking a picture, press the
Y AREVIEW/SET] button.
&laquo; The last captured picture is displayed for
about 5 seconds. Press the zoom button
(QA, the captured picture is zoomed 4
times (&reg;) and 8 times if you press it once
again. You can also change the position with
ASI.
* You can check the previous or following
picture with &lt;/&gt;.
Ш Erasing the captured picture during
the review
1 Press[T].
2 When the message [DELETE THIS
PICTURE?] is displayed, press &lt;/&gt;
to select [YES].
3 Press the V/REVIEW/SET] button.
&laquo; The picture is erased.
+ Once erased, pictures cannot be recovered.
&laquo; In motion image mode [EH], Review cannot be
used.
30
кожа — ЕР i= or TIE
OSTEN THERE ET
= . НЫЕ пре a Ce
Recording images (basic)
Recording Motion Images
With this camera you can also record motion
images. {If using the supplied 16MB SD
Memory Card, it is possible to record for up to
about 80 seconds)
1 Set the mode dial to motion image
mode [Hi 1.
2 Centre the subject on the LCD
Monitor and press the shutter bution
halfway.
= When the focus is adjusted, the focus
indication &copy; [@] appears.
3 By pressing the shutter button fully,
the recording starts.
* The audio REG starts simultaneousiy.
(() Microphone)
4 By pressing the shutter button fully
again, recording stops.
+ if during the recording the memory of the
automatically.
The picture size is fixed to 320 x 240 pixels.
* The remaining time displayed on the LCD Monitor is an approximation.
* You cannot record motion images without audio.
+ If using the MultiMediaCard, after recording motion images, the card access indication and
the flash/access indicator may appear for a while, but this is not a malfunction.
&laquo; After recording starts, the auto focus/zoom/white balance/aperture values are locked (with
the first frame).
&laquo; Recording could suddenly stop when recording motion images with cards other than a
Panasonic SD Memory Card.
&laquo; When the motion image recorded with this camera is played back on other equipment, the
quality of pictures and sounds may be deteriorated or pictures may not be able to be played
back.
* In motion image mode [FF ], review cannot be used.
31
card becomes full, the recording is. stopped PE
Seer AA RA EE
Recording images (basic) Recording images (basic)
Ising the Optical Zoom Using the Digital Zoom
With this function, you can make people and
subjects appear closer, with the 3 times
optical zoom, and landscapes can be
captured in wide angle.
It is possible to further magnify a subject
already magnified 3 times with the optical
zoom by 3 more times, with the digital zoom,
thereby reaching a maximum of 9 times.
[Preparation]
* Set the mode d&iacute;al except for [()]. (P24)
1 Aim the camera at the subject and
adjust the size with the zoom button.
[Preparation]
* Set the mode dial except for (&gt;) W]. (P24)
1 Pressthe [MENU] button.
To make subjects closer (Tele): 2 Press A/Y to select [D.ZOOM].
Press the zoom button (T). 3 Press 4/&raquo; to sett
o [ON].
To make subjects wider (Wide angle): [ON]
Press the zoom button (W). 4 Press the [MENU] button.
CE ap 2 Take apicture. * The menu will disappear.
НЕ * The recording method is the same as in ;
3 “Taking Pictures”. (P27) ; * The zoom adjustment and recording method are
t the same as in “Using the Optical Zoom”. (P32)
* When the digital zoom is set to [ON], the digital
a , ; zoom indication (1) appears.
* The focus is adjusted at a distance of more than 7 * When entering the digital zoom range, the zoom
50 cm. For details on i bar will pause. | | 3
simple mode/macro mode/colour effect mode, EPI
read P29/P41/P45.
* The picture may be slightly distorted according to
the lens. The distortion will increase as you make
subjects wider and closer. * When using the digital zoom the picture quality
becomes deteriorated. |
* We recommend that you use a tripod in the
digital zoom range.
32 33
DE A EI E E
= EAT LIA, TT om
i = EERE a E
FTE
Recording images (basic) Recording images (basic)
king Pictures using the Built-in Flash EMS]: Slow sync /Red-eye reduction
When you take a picture with a dark
[Preparation] background landscape, it makes the flash fire
+ Set the mode dial except for [(+))T 44h YUEH]- and the shutter speed slow, so that the dark
(P24) background landscape will become bright.
Simultaneously it reduces the red-eye
1 Press[4].
phenomenon. We recommend that you use a
* Every time you press [ &pound; ], the available tripod.
settings will appear as shown below. (There
are settings that cannot be set according to
the REC mode. Those that cannot be set are
not displayed when pressing [ $ ]. Refer to
the table on the left.)
IE): Forced OFF
Even in dark places, the flash does not fire.
Set it when you take pictures in places where
using flash is not allowed.
2 Take a picture.
1 }
El +— [ES &laquo;Dil
* The recording method is the same as in
&quot;Taking Pictures”. (P27)
ET: AUTO
О The flash fires automatically according to the
O lighting condition. | : + Do not look closely at the flash light when it fires.
e * The available flash range is about 30 em - 140 cm (Tele), 30 cm - 2.4 m (Wi de). (When...
EXSY: AUTO/Red-eye reduction 3 setting to ISO100)
&copy; The flash fires automatically according to the ; &laquo; When the shutter jiggle alert is displayed within the available fiash range, we recommend
&copy; recording situation. ; . Do DE over the flash sensor (1) with your fingers or other items. Otherwise, brightness
O It reduces the red-eye phenomenon (when a 3 tb d.
bject's eyes appear red in flash light). | cannot be perceive
O Us &gt; it when you take pictures of people or ; * In fandscape mode | a motion image mode [KA], the flash setting is fixed to the Forced
O animals in low lighting conditions. 1 ОРР 4)
a 4 * When you set to burst mode or auto bracket, only 1 picture is taken for every flash firing.
EME: Forced ON —- E * The flash indication becomes red when pressing the shutter button halfway.
- то _ 3 &laquo; When the flash/access indication @ and the flash indication blink red, you cannot take a
The flash'fires every time a picture IS я picture even when you press the shutter bution fully.
- captured. a . + &laquo; When using the flash, do not let subjects near the flash. The shape or colour of subjects
Use this setting when your subject is back-lit ; may be changed because of the heat and light of the flash.
or under fluorescent light. &Agrave; * When taking a picture with the flash, the white balance will be automatically adjusted
+ (except for manual white balance setting), but the white balance may not be properly
adjusted when the flash light is insuificient.
* When taking a picture with the flash after setting the white balance manually, the white
balance may not be properly adjusted. We recommend setting the white balance to [AUTO]
when using the flash. (P51)
34 35
| Recording images (basic)
Using the Continuous AF
This function allows you to reduce the time
required for focusing, as AF is continuously
working without the need to press the shutter
button every time. |
4
A &copy; N
SSR
$4 AUDIO REC.
CIICONTAR IA e
[Preparation] ;
e Set the mode dial to [4]. (P24)
Press the [MENU] button.
Press A/Y to select [CONT.AF].
Press &lt;/&gt; to select [ONL
Press the [MENU] bution.
&laquo; The menu will disappear.
* The indication [MG] (1) will appear.
* In the mode except for [4 ], [CONT.AF] is fixed to [OFF].
&laquo; The battery is depleted more quickly using continuous AF. |
* It may take time to adjust the focus after zooming (Wide — Tele) or if changing the focus to
the subject closer suddenly.
&laquo; Press the shutter button halfway again to adjust the focus when itis difficult to adjust the
focus.
36
Recording images (basic)
Taking Pictures with the Self-timer
When you set the self-timer, the picture is
autornatically taken after 10 seconds (or
2 seconds).
[Preparation]
* Set the mode dial except for [(+) IFE]. (P24)
1 Press the [(\)] button.
* Every time you press it, what is displayed
changes as shown below.
Eco s)— OZ (25) — OFF
4 |
DS Self-timer set to 10 seconds
SA : Self-timer set to 2 seconds
When these indicators are not displayed,
self-timer setting is cancelled.
2 Press the shutter button fully.
* The self-timer indicator () blinks and the™: ~~
shutter is activated after 10 seconds (or -
2 seconds).
&laquo; When setting the self-timer, the focus and
exposure are not adjusted by pressing the
. ' i shutter button haifway. When pressing the
— — y button fully, they are automatically adjusted
LL | | Fi just before recording.
| * If yout press the [MENU] button when the
self-timer is set, the seff-timer setting is
cancelled.
* In simple mode [&sect;1, you can only set to 10 seconds [51
* In burst mode, the self-timer setting applies to the first picture only.
* We recommend using a tripod when setting the self-timer.
37
Recording images (advanced)
aking Pictures with Audio
You can take a picture with audio for
CAF CONT.AF
E D.Z200M
5
seconds.
[Preparation]
* Set the mode dial except for [())! YHH]-
1
2
3
4
* When setting to auto bracket/burst mode, it IS not
(P24)
Press the [MENU] button.
Press A/V to select [AUDIO REC.].
Press 4/P to select [ON].
Press the [MENU] button. -
&raquo; The menu will disappear.
* This icon [EM] O) will appear on the LCD
Monitor.
Press the shutter button fully and
take a picture.
&raquo; It is not necessary to continue pressing the
shutter button.
&raquo; Audio is recorded from the built-in
microphone (1) of the camera.
&laquo; 5 seconds later, the audio recording is
stopped automatically.
&laquo; If you press the [MENU] button during the
audio recording, it will be cancelled.
possible to take a picture with audio. (P48, P54)
38
Ty Lm Ry ET To
Rec ge + A
- я К Эро, я p
Recording images (advanced)
Changing the Picture Size
You can choose among 4 picture size
settings.
[Preparation]
* Set the mode dial except for (6) YT y ИЕН)
(P24)
1 Press the [MENU] button.
2 Press A/V to select [PICT.SIZE].
3 Press &lt;4/P to select the picture size.
‚= [2048]: 2048 x 1536 pixels
* [1600]: 1600 x 1200 pixels
e [i280]: 1280 x 960 pixels
2,3 _ * [610]: 640 x 480 pixels
: 4 Press the [MENU] button.
; pe _ * The menu will disappear.
| [=] SPOT MODE
* in motion image mode [HH], the picture size is fixed to 320 x 240 pixels.
* The smaller the picture size you select, the more pictures you can store on the Memory
Card. In addition, a small data volume allows you attach the picture to an e-mail or post it on
a web site more easily.
&laquo; if you select a larger picture size, the printed picture will be clearer, especially with larger
sized prints. TL
39
Recording images (advanced)
Changing the Quality
(Data Compressio
SPOT MODE
SELECTS SETO EXITEY
&raquo; Picture size/Quality and number of recordable pictures (16MB/64MB SD Memory Card)
ElrPICISZE ME
[Preparation]
+ Set the mode dial excep
1
2
3
4
n Ratio)
You can choose among 2 quality levels {Data
Compression Ratio).
(P24)
Compression Ratio).
+ Bf : Fine (Low compressi
It gives priority to picture quality to record
high quality pictures.
- EA: Standard (Siandard compression)
It gives priority to the number of recordable
pictures and records stand
pictures.
&laquo; The menu will disappear.
or (DNS IER
Press the [MENU] button.
Press A/Y to select [QUALITY].
Press &laquo;UP to select the quality (Data
on)
ard quality
Press the [MENU] button.
16MB (supplied) 64MB (optional)
Picture size =
На Ea | Ea
2048 x 1536 10 20 + 45 88
1600 x 1200 | 17 34 „| 74 &Agrave;. 149
1280 x 960 22 43 96 184
540 x 480 69 129 208 _ 553
In motion
image mode 80 seconds 350 seconds
+ The numbers shown in the table are approximate numbers. If you mix fine quality and
standard quality, the number of recordable pictures changes.
&raquo; [t may happen that pictures appear like
&laquo; Remaining frame which is displayed on
frames, however, this is not a malfunction.
40
a mosaic depending on the scene characteristics.
the LCD Monitor may not correspond with recorded
Recording images (advanced)
Taking Pictures using Macro Mode
When you take pictures from a distance closer
than 50 cm (Tele), set the camera in macro
mode [4]. This allows you to get closer to the
subject up to 10 em (Wide).
* Macro Mode [4]
T 30 cm po
10 cm
|
* Normal picture
T 50 cm ео
50 ст
1 Setthemode dial t&oacute; Macro mode [4].
2 Take a picture. -
* The recording method is the same as in = ВЕ
“Taking Pictures”. (P27)
* Select the flash setting depending on the situation. (P34)
* The available flash range is about 30 cm - 140 cm (Tele), 30 cm - 2.4 m (Wide). (When
setting to 150100) -.
* When the shutter jiggle alert is displayed within the available flash range, we recommend
using the flash. |
&raquo; When the camera lens is at a distance over the available range from the subject, focus may
not be adjusted even if the focus indication appears.
&raquo; When selecting the macro mode, optical finder functionality is limited. Use the LCD monitor.
41
“я . Recording images (advanced)
О Taking Pictures using Portrait Mode
This mode allows you to easily achieve the
depth of focus effect. The subject stands out in
front of an unfocused background.
We recommend placing the subject much
closer and allowing for proper distance
between subject and background.
Please note that this mode is suitable for
outdoor situations under sunlight.
{ Set the mode dial to Portrait mode [&sect;}].
2 Take a picture.
&laquo; The recording method is the same as in
“Taking Pictures”. (P27) &gt;
* White balance is set to [AUTO] in the default position. You can change the setting. (P51)
Recording images (advanced)
Taking Pictures using Landscape Mode
in Landscape mode the camera is adjusted to
produce the greatest depth of field. This mode
works best outdoors under direct sunlight at
distances exceeding 10 m.
1 Set the mode dial to Landscape mode
[aA )-
2 Take a picture.
* The recording method is the same as in
“Taking Pictures”. (P27)
&laquo; Flash is set to Forced OFF [FE].
* The focus is adjusted at a distance of 3m -e . .
+ White balance is set to [AUTO] in the default position. You can change the setting. (P31)
43
Recording images (advanced)
Taking Pictures using Night Portrait
Mode
The Night Portrait mode combines the
electronic flash with a &quot;slow shutter” mode.
This unique feature allows you to photograph
close subjects against the natural night
background. Since the shutter speed is slow,
we highly recommend using a tripod to steady
the camera.
The subject should be positioned within the
available flash range. When setting to
1SO100, (Tele: 30 cm - 140 cm, Wide: 30 cm -
2.4 m).
We recommend pressing the zoom button
(W) before taking a picture.
1 Set the mode dial to Night portrait
mode [74].
2 Take a picture.
+ The recording method is the same as in
“Taking Pictures”. (P27)
&laquo; White balance is set to [AUTO] in the default position. You can change the setting. (P51)
&laquo; When flash is set to Forced OFF [FE], you can capture the night illumination scenery itself
with slower shutter speed. (Max: about 8 seconds),
* When taking a picture in a dark place, picture noise.may appear. To avoid picture noise, we
recommend setting the picture adjustment to [NATURAL]. (P50)
r
44
oR RT TT ag
1
5 г Les cup Man me В
Маре TET ERT a .
Fete &agrave; LATE SAR Tree
Recording images (advanced)
Taking Pictures using Colour Effect Mode
This function enabies the use of colour effects
such as bluish, reddish, and black and white.
1 Set the mode dial to Colour effect
mode [5].
2 Press V/&lt;4/P to select, [COOL],
[WARM] or [B/W].
* COOL:
The picture becomes bluish.
* WARM:
The picture becomes reddish.
+ BW:
The picture becomes black and white.
* The indication [coon / Warm /[ Baw] ] &copy; will
appear.
* Press the [MENU] button to set again.
SELECT COLMODE
[0 &laquo;&lt; &raquo; RE
A
Herne own mas el
chia coli = opal TRI = NEM
„il
s The focus is adjusted at a distance of 30 cm - &aelig; (Tele), 10 cm - œ (Wide).
+ Press the [MENU] button twice to display the normai menu.
45
Recording images (advanced)
Taking Pictures using Spot Mode
When this mode is selected, both the focus
and the exposure will be adjusted to spoton a
limited area. This is suitable when you take
pictures in delicate light conditions and intend
to take a picture in a limited area.
[Preparation]
* Set the mode dial except for [VQ MH}
(P24)
1 Press the [MENU] button.
2 Press A/Y to select [SPOT MODE].
3 Press &laquo;UP to select [ON].
4 Press the [MENU] button.
Eu * The menu will disappear.
* The spot AF area L 4 (1) and spot metering
target + (6) appears.
5 Centre the subject in the spot AF
area. `
CE W.BALANCE
EAPCTSIZE BRL)
+A QUALITY Н
6 Take a picture.
* The recording method is the same as in
“Taking Pictures”. (P27)
* When the subject is dark, the focus may not be adjusted properiy.
* Background may become dark or whitish depending on the subject to set to appropriate
exposure in the spot AF area.
&laquo; [f the subject is out of the spot AF area, use the AF/AE lock. (P49)
46
Recording images (advanced)
Compensating the Exposure
in some situations the illumination of the
background and your subject may differ, Auto
exposure systems may not always calculate
the exposure correctly. This is a normal
situation. This feature allows you to manually
compensate the exposure.
{Preparation]
* Set the mode dial except for [(&gt;)]/TQp YH].
(P24)
1 Press the [4 Ce ] button.
2 Press &lt;/&gt; to compensate the
exposure.
ARE *&raquo; You can compensate from —2 EVto +2 Ev
with 1/3 EV step.
(EV is an abbreviation of Exposure Value,
and it is the amount of light given to the CCD
by the aperture value and the shutter speed)
* The compensation state is not reflected by
the brightness of the LCD Monitor.
3 Press the V/[REVIEW/SET] button.
* The compensation window will close: =:
* The exposure compensation indication @
E EZ] | will appear.
| 4 Takea picture.
* The recording method is the same as in
“Taking Pictures”. (P27)
тя Ee a TEL
* Depending on the shutter speed and aperture value, the range which is possible to
compensate the exposure will be limited.
47
Recording images (advanced) Recording images (advanced)
Taking Pictures using Auto Exposure Using the AF/AE Lock
( A E) B rac k et If the subject is out of the AF area and you
| press the shutter button, the subjects focus is
Pressing the shutter button once, the camera not adjusted. After locking focus and
exposure (AF/AE lock), you can take a clear
picture with adjusted focus.
AF: Auto focus
AE: Auto exposure
will automatically take 3 pictures changing
exposure according to the set exposure
4 compensation value.
Ez ee [Preparation] |
` : + Set the mode dial except for [P&gt;)]1Q VEN]. [Preparation]
: В = e ; (P24) ! * Set The mode d&iacute;al except for [(*)]. (P24)
ON 1 Press the [C4 dy, ] button twice to \ | T Aim the camera at the subject on which
М “ select [E41, AUTO BRACKET]. you want to adjust the focus to enter
| the AF area @) on the LCD Monitor and
193 | 2 Press &gt;, then press &laquo;qu № to set the 1 &reg; then keep pressing the shutter button
ss exposure compensation range. halfway (AF/AE lock)
[E -
. OFF ie * When the focus is adjusted, the focus
&gt; - indication (&copy; [@] appears.
2 = (1/8 EV step) о м O 1] appea
ove the camera keeping the chosen
| 3 Press the Y/[REVIEW/SET] button. composition and press the shutter
* The compensation window will close. button all the way.
&laquo; The auto bracket indication (1) appears. : Y | |
4 Take a picture. &copy; | a Q7E a
SELECT &lt;&raquo; Fan + The recording method is the same as in * Before pressing the shutter button, you can set |
— e “Taking Pictures”. (P27) | 5 the AF/AE lock again and again.
e El Py 1 |
= = e EE]
* Once you take a picture, auto bracket will be cancelled automatically.
When flash fires, you can take oniy 1 picture.
&laquo; When setting auto bracket, you cannot take a still picture with audio. ;
&laquo; When setting auto bracket and the burst mode simultaneously, auto bracket will be В
performed. -
48 E 49
NU
E
Ne
e
an vy
ум
y ad
A
of
1
4
X
5
A
yl
Л
к ри ETH
A 2 &ntilde;
Pu.
E
EA На ВЕН
= ч EU Pr bia
Far A TR, 4
Recording images (advanced) | Recording images (advanced)
Picture Adjustment Setting the White Balance
(Natural/Standard/Vivid) automatically adjust he camera lo produce
natural flesh tones. !n some situations where
[Preparation] - several different types of lighting are present,
* Set ihe mode dial except for [(&gt;) TW VEH1- enhanced performance can be achieved by
(P24) | setting the white balance manually.
1 Press the [MENU] button.
lect [PICT.ADJ.] [Preparation]
2 Press A/V to select [PICT.ADS.]. + Setthe mode dial except for [() INP VIBE}
3 Press 4/&raquo; to select [NATURAL], (P24)
[STANDARD] or [VIVID]. 1 Press the [MENU] button.
e [NATURAL]: The picture becomes softer. |
+ [VIVID]: The picture becomes sharper. | 2 Press A/Y toselect [W.BALANCE].
4 Press the [MENU] button. 3 Press 4/P to select the mode.
. il disappear. * AUTO:
23 = The meno w Ww 2,3 = if the auto white balance is set
LO SEC} &raquo; E (Daylight):
DARA for recording outdoors on a bright day
+ IY (Cloudy): a
for recording under a cloudy and shady sky
BEE SEN &copy; conn umd + halogen light
PTE r recording under halogen Fighting -:
EEE EE = . (White set): Шо
for manual setting (Read the following page
where the manual setling is explained in
detail) ;
4 Press the [MENU] button.
* The menu will disappear.
, +. ; * The setting of the white balance is applied to the other recording modes.
* In simple mode [4] or motion image mode [fH 1, the white balance is fixed to [AUTO].
; * When taking a picture with the flash, the white balance will be automatically adjusted
5 (except for manual white balance setting), but the white balance may not be properly
adjusted when the flash light is insufficient. |
=
E
ET
i
5.
НЕ
к
=.
=
ES
50 51
Recording images (advanced)
| Here the white set mode of white balance is
explained.
[Preparation]
* Set the mode dial except for [(&gt;) Y QW MH |-
(P24)
1 Press the [MENU] button.
2 Press A/Y to select [W.BALANCE].
3 Press 4/P to set to white set [EX].
Only when setting the white balance again
4 Press&raquo;.
* The message “FRAME THE CAMERA AT
THE WHITE SURFACE AND PRESS
SHUTTER&quot; is displayed.
5 Aim the camera at a sheet of white
paper &copy; or similar object so that it
completely fills the frame to white on
the screen and press the shutter
2 к button all the way.
+ White balance is set.
6 Press the [MENU] button.
&raquo; The menu will disappear.
&laquo;2 QUALITY
SPOT MDDE | [FF |
SELECTS en :
4 | * When taking a picture with the flash after setting
= = | the white balance manually, the white balance
| may not be properly adjusted. We recommend
FRAME THE CAMERA] setting the white balance to [AUTO] when using
[AT THE WHITE SURFACE] the flash. |
[AND PRESS SHUTTER] ’
CANCELLE
52
Recording images {advanced)
Setting ISO Sensitivity
| БО sensitivity is a value that corresponds to
the sensitivity to light. The higher it is, the
better the camera performs in dark places.
[Preparation]
* Set the mode dial except &agrave;
(P24) cept for [(F1 VIGO ИЕН.
1 Press the [MENU] bution.
2 Press A/V to select [SENSITIVITY].
3 Press &laquo;4/ to select the sensitivity.
e AUT O: The ISO sensitivity is automatically
adjusted. ff your picture is still too dark,
2,3 please use the flash.
crie + [50] 15050
&laquo; 108 150100
* 200) 150200
5 CONTA * 15000
4 Press the [MENU] button.
SELECT# SET ; isap
[E * The menu will disappear.
HH
1 р 5 - pi
53
Recording images (advanced)
Taking Pictures using Burst Mode
By continuously pressing the shutter button, it
is possible to record in burst mode.
Number of recordable
Burst pictures
speed . arr
4 frames/ 8 frames
Ly H second 5 frames
2 frames/ 8 frames
Ly L second 5 frames
[Preparation] -
e Set the mode dial except for [BVI 1. (P24)
1 Press [E].
* Every lime you press it, what is displayed
changes as shown below.
mE — 2 — OFF
A J
Cy H: High speed
CyL :Lowspeed —.
When these indicators are noi displayed,
burst mode is cancelled.
2 Press the shutter button halfway to
lock the focus, then press it fully to
take pictures in sequence. 5
&laquo; It is possible to record 4 frames in 1 second in
burst mode, at a shutter speed higher than 1/60,
but the flash does not fire simultaneously.
e !f the flash fires, it is possible to record only
1 frame.
* In simple mode [W], he shutier speed is fixed
to the low speed. (P29)
&raquo; You cannot take still pictures with audio in the
burst mode.
&raquo; When setting auto bracket and the burst mode E
simultaneousiy, auto bracket will be performed.
54 | E
NT DIO EUA
SAEs AER rm
EARL A HW Ba TIL E UI Ellie shell Gelb edd en bch. yh EA ees a В
Tie TE ad AAA
En y
Playback
Playing Back Still Pictures
1 Setthemode dial to playback [&gt;].
* The last recorded picture is played back.
2 _ Press &lt; to play back the previous
picture.
Press P to play back the next
picture.
* Every time you press &lt;/ p=, the previous
(or next) picture is played back.
* The first picture follows the last one.
[Fast forwarding/Fast rewinding]
During playback, continue pressing -/&raquo;.
&gt;; Fast forward
&laquo;4: Fast rewind
* The file number increases/decreases. When
releasing 4/#, the picture corresponding to the
current file number is displayed. -
* This camera is based on the DCF standards (Design rule for Camera File system) which
were established by the Japan Electronics and information Technology Industries
Association (JEITA). -
* The file format that can be played back with this camera is JPEG. (There are also pictures
that cannot be played back in JPEG format)
* When playing back still pictures that have been recorded with other equipment, the quality
of pictures may be deteriorated and pictures may not be able te be played back.
* When playing back a file out of standard, the folderffile number is indicated by [=] and the
screen may become black,
55
Playback
Playing Back Still Pictures with Audio
1 Set the mode dial to playback [(&raquo;]].
2 Press 4/P to select the file with
audio icon [WA] @.
3 Press the V/[REVIEW/SET] button to
play back the audio.
You can hear audio from the speaker (1).
EN To adjust the sound volume @
1 Setthe mode dial to playback [(&gt;)].
2 Press the [MENU] button.
3 Press &gt; to select the setup menu.
2 @ 4 Press A/V to select [VOLUME].
[=] Vase 5 Press 4/P to adjust the sound
OO VOD volume.
6 Press the [MENU] button.
&laquo;The menu will disappear.
CONEA
SELECTS SETO PXITE:1
56
ESS LE
aq fe ae
9 Images Multi Playback
lt is possible to display 9 images at once,
[Preparation]
* Set ihe mode dial to playback [(&gt;)]. (P24)
1 During playback, press the zoom (W)
button [is }-
= Multi playback (9 frames) starts,
2 Press A/V/4/&raquo; to select images.
* To return to the normal indication, press the
zoom button [Q 1. The image with the file
number coloured in yellow is displayed.
57
Playback
Using the Playback Zoom
During playback it is possible to enlarge
pictures. (2 times/ 4 times/ 8 times/ 16 times)
[Preparation]
&raquo; Sel the mode dial to playback [(&raquo;)]. (P24)
1 During playback, pressthe zoom (1)
button [Q_].
* To enlarge further, press the zoom (T)
button [Q ] again.
To reduce the picture, press the zoom
(Y) button [ xa].
* Use A/Y/-€/P- 10 change the area to be
enlarged. —
EN To delete a picture during the
playback zoom
Press [|
When this message is displayed “DELETE
THIS PICTURE?”, press 4/l to select
[YES], and press the Y //REVIEW/SET]
button. (P60)
ification i | lity deteriorates.
&laquo; The more the zoom magnification increases, the more the picture qual $
* The playback zoom may not operate if pictures have been recorded with other equipment.
58
Playback
Playing Back Motion Images
[LOSER ISR:
[Preparation]
* Set the mode dial to playback [()]. (P24)
1 Press 4/P- to select the file with the
motion image icon [HH 1G
2 Press the V/[REVIEW/SET] button to
play back the motion image.
* By pressing Y , motion image playback will
stop.
* The icon (2) is corresponding to the 4A/Y/-€/&raquo;
button.
[Fast forwarding/Fast rewinding]
During motion image playback, continue
pressing -&laquo;/&raquo;.
&gt;: Fast forward
&laquo;4: Fast rewind
* When releasing the button, it turns to normal
motion image playback, a
[To pause] | a _
Press A during motion image playback, =. =
~ &raquo; Press &Agrave; again to cancel pause.
EN To adjust the sound volume (P56)
* The playback zoom cannot be used while playing back motion images.
* The file format that can be played back with this camera is QuickTime Motion JPEG.
* It could happen that the Motion JPEG file recorded by PC, other digital cameras or other
equipments cannot be played back with this camera.
* When playing back motion images that have been recorded with other equipment, the
quality of images may be deteriorated and images may not be able to be played back.
* When using a high capacity Memory Card, it is possible that fast rewinding may be slower.
59
Editing Editing Ш
[Delete muiti images]
it is possible to delete up to 50 images ail at
once.
Deleting Images
images recorded on the card can be deleted.
Once deleted, images cannot be recovered. 1 Press [5] twice.
2 Press A/V to select [MULTI DELETE]
[Preparation] | imbibe
e Set the mode dial to playback [(&reg;]]. (P24)
&raquo; When an image is protected, it cannot be 3 Press 4/P to select the images to be
deleted. Cancel the protect setting. {P65) deleted.
4 Press the V/REVIEW/SET] button.
[Delete single image] 2,2 | лв T
&laquo; The selected images are displayed with
i to be
1 Press 4/P to select the image &deg; [7]. Pressing the Y AREVIEW/SET] button
deleted. E MULTI DELETE: &gt; again, the setting is cancelled.
D Press il - | &laquo; The indication [Ea] blinks red if the
; selected image is protected. Cancel the
2 3 Press &lt;/&gt; to select [YES]. . | | protect setting. (P65)
4 Press the V/[REVIEW/SET] buiton. :
5 Pressil.
* The selected image is deleted. 3,4 6 When this message is displayed
i “DELETE THE PICTURES YOU
: MARKED?”, press &lt;/P to select
SELECT&raquo; | [YES]. A
EM SIG ; 7 Press the V/[REVIEW/SET] button:
: * The selected multi images are deleted all at
| SELECT &laquo;&raquo; once.
: MARKUNMARK +
| [Delete all images]
#3&raquo; MULTI DELETE Once deleted, images cannot be recovered.
rm || В
У ELETE THE PICTURES 1 Press [ff] twice.
| | = 2 Press A/V to select [ALL DELETE]
and then press &gt;.
3 When this message is displayed
“DELETE ALL PICTURES?”, press
“UP to select [YES].
Е A ALL DELETE 4 Press the VAREVIEW/SET] button.
* images that are protected (P65) or out of
DCF standards (P55) are not deleted.
60 67
AR Tea OA TE AUSTER [UA data 7% ной FE
4
=&gt;
Editing
Writing the Print Information to the Card
(DPOF Setting)
it is possible to write print information (DPOF
data) on the card with the images that you
want to print and also the number of prints
required. |
DPOF is an abbreviation of Digital Print Order
Format. With the DPOF corresponding
system, you can add print information to the
images on the Memory Card.
AT TNA ADENTRA ahr =
Editing
[Multi copy setting]
| Press the [MENU] button,
2 Press A/V to select [DPOF PRINT]
and then press &gt;,
3 Press A/V to select [MULTI] and
then press &gt;.
4 Press 4/P to select the image.
5 Press 4/Y to select the number of
sheets to be printed.
* The number of sheets can be set from 1 to
[Preparation] 999.
* Set the mode dial to playback [(&raquo;) 1 (Р24) * Copy setting @ is displayed (white).
[Single copy setting] 6 Repeat steps 4 and 5, and at the end
2,3 1 Press the [MENU] button. : EE press the [MENU] button twice.
; : ERIE + The DPOF setting of multi i i
ENA : go images is set at
2 Press A/V to select [DPOF PRINT] ; once. 8
—— and then press &gt;, * The menu will disappear.
RECERCA UI “Pa :
3 Select [SINGLE] and then press &gt;.
ELDE SHOW ME MULTI
Y AUDIO DUB, MACANCEL
mY RESIZE INDEX
SELECTS SET EXITED
=
Rp RN
[a HL]
|
4
AA IEN
100-0001
no
OU АО EA
SELECT4&gt; SAR ето]
5
100-0001
SELECT&laquo;&raquo;
4 Press 4/&raquo; to select 1 image.
5 Press A/V to select the number of
sheets.
* The number of sheets can be setfrom 1 to
999,
6 Press the [MENU] button twice.
* The menu will disappear.
[To cancel]
Set the number of sheets to 0 in step 5 of the
[Single copy setting].
62
AAN eb ad Tid AE
pr Tea EEE ON TRE NTRA METE CES La
[To cancel]
Set the number of sheets to 0 in step 5 of the
[Multi copy setting]. — a cu
&raquo; If the file is not based on the DCF standard, the
DPOF setting cannot be set. &copy;
DCF is abbreviation of [Design rule for Camera
File system), stipulated by JEITA [Japan
Electronics and Information Technology
Industries Association).
* When using the DPOF feature, this camera will
overwrite any previous DPOF settings made by
other products.
* When this message is displayed “MEMORY
CARD FULL&quot;, cancel all settings and set DPOF.
03
1,6 2,3,4,5
1,6 2,3,4,5
23 | ETE
3
PERCH Oo PROTECT
TC CTS
Pre
pr i ET
D; SLIDE SHOW MULTI
$ AUDIO DUB.
CANCEL
md RESIZE
SELECTS SET EXT
A
4 | 19 CANCEL ALL DPOF
CANCEL ALL DPOF
SETTINGS?
Г&quot;
Lo
H
ACE
TEE ee
AA a
et]
4 1% DPOF INDEX $
SET INDEX PRINT?
(A) CENA
SET/CANCEL INDEX
PRINT?
3521 CANCEL
SELECT&raquo; TZ
No
Editing
[To cancel all settings]
Press the [MENU] button.
Press A/Y to select [DPOF PRINT]
and then press №.
Press A/V to select [CANCEL] and
then press &gt;.
When this message is displayed
“CANCEL ALL DPOF SETTINGS?”,
press &laquo;4/0 to select [YES].
Press the Y AREVIEW/SET] button.
* AIF DPOF settings are cancelled.
Press the [MENU] button.
=
&laquo; The menu will disappear.
[Index setting/to cancel]
1
2
3
4
64
. . eh as mre LUS E TE a a OT SEE CA a
AM a LT Loe = PE. uk EEE EEE A rate nA RIA a ATTE E pr
Press the [MENU] button.
Press A/V to select [DPOF PRINT]
and then press &gt;,
Press A/V to select [INDEX] and
then press &raquo;.
When this message is displayed
“SET INDEX PRINT?” press 4/P to
select [YES].
&laquo; When the index is already set, the message
@ “SET/CANCEL INDEX PRINT?” is |
displayed.
Press UP to select [SET], [CANCEL] or
[NO]. ;
Press the Y/[REVIEW/SET] button.
* All imag&eacute;s are set/cancelled. |
Press the [MENU] button.
* The menu will disappear.
a
7 a
Editing
Protecting Images on the Card
it is possible to protect important images
recorded on the card from accidental erasure.
[Preparation]
* Set the mode dial to playback [()]. (P24)
[Single setting/to cancel]
1 Press the [MENU] button.
2 Press A/V to select [PROTECT] and
then press &raquo;.
1,6 2,345
3 Press A/V to select [SINGLE] and
then press &raquo;.
2,3
2 Press &lt;&gt; tosclect image.
5 Press the Y/[REVIEW/SET] bution.
E
G
Ora DINGDES
* The protect icon (D appears.
* By pressing V/AREVIEW/SET] again, the
protection is cancelled and the icon will
disappear.
6 Press the [MENU] button twice.
* The menu will disappear.
[Multi setting/to cancel, To cancel ail
settings]
7 The method is the same as in “Writing
the Print Information to the Card (DPOF
Setting)”. (P62~P64)
SELECT &lt;&gt;&raquo;
SETY Ех
* Formatting the card will erase all the data on the card, even if ! i in thi
procedure ; you protect the images in this
* When trying to delete a protected file, these messages are dis -
I , played “THIS PICTURE 15
PROTECTED” or &quot;PROTECTED PICTURES REMAIN UNDELETED&quot;. H you want to delete
this file, cance! the protect setting first.
. ane protect setting is effective only in this camera.
* Sliding the SD Memory Card Write-Protect switch to [LOCK] prevents the pict
deletion even if the protection is not set. | “Ip &copy; picture from
* The audio dubbing cannot be used with protected images. (P68)
65
23
Om PROTECT
sells
EEES AA A 1
CE) E A e AC &gt;
E AUDIO DUB. DPOF
PY RESIZE
SELECTS |
DURATION M1 SEC:
AUDIO do
E
E
=
очи Ea =
6
CREE
SECO
Technical use
Playing Back with Slide Show
(Automatic Playback)
All pictures selected in the card can be played
back one-by-one automatically.
[Preparation]
* Set the mode dial to playback [(&gt;)1. (P24)
1
2
3
Press the [MENU] button.
Press 4A/Y to select [SLIDE SHOW]
and then press &gt;.
Press A/V to select [ALLY[DPOF]
and then press &gt;.
[ALL]:
for playing back all pictures
* [DPOF]:
for playing back the DPOF set pictures
Press A/Y/-/) for seiting below.
&raquo; [DURATION]:
It can be set among 1, 2, 3 and 5 seconds.
* (AUDIO!:
It can be set to [ON] or [OFF]. By setting it to
[ON], it is possible to play back the still
pictures with audio in slide show.
&laquo; [DPOF SET] (Only when setting to {DPOF}:
You can select the pictures you want to set
to the Slide Show.
* [CANCEL ALL] (Only when setting to
[ОРОЕ]);
Yourcan cancel the Siide Show setting.
Press 4/Y to select [SLIDE SHOW.
Press &gt;.
&raquo; The slide show starts.
&lt; By pressing the [MENU] button, it stops.
66
Technical use
&raquo; In motion image playback, slide show is not available.
* The DPOF setting of slide show will not be applied to the DPOF printing.
. When seiting [AU DIO] to [ON], the still picture with audio is played back for 5 seconds
(audio recording)/Max 10 seconds {audio dubbing).
* When editing with the supplied software [SD Viewer for DSC] recorded on the CD-ROM
you can play back in SD slide show with this camera. (P89)
* images ihat are set DPOF with the supplied software [SD Viewer for DSC] recorded on the
CD-ROM cannot be played back in DPOF slide show with this camera. Set DPOF slide
show on this camera.
+ When using the DPOF feature, this camera will overwrite any previous DPOF setti
made by other products. VP ts
67
Technical use
Adding Audio to Recorded Pictures
(Audio Dubbing)
1,6 2,345
2
IEE
E EVE OE EE
ETE
A
„”
R&Eacute;SIZE
SELECTS SETO EXITED
SELECT4&raquo;
EA
DA E A A E Ta
It is possible to add a 10-second narration to
a recorded picture.
[Preparation] |
+ Set the mode dial to playback [{p-}]. (P24)
1 Press the [MENU] button.
2 Press A/V to select [AUDIO DUB.]
and then press &raquo;.
3 Press 4/&raquo; to select the picture.
4 Press the Y/[REVIEW/SET] button, to
start audio recording.
(M) Microphone)
&laquo; When audio has already been recorded,
after the audio dubbing the original audio is
overwritten.
&raquo; When audio has already been recorded, this
message is displayed “OVERWRITE AUDIO
DATA?”. Then press &laquo;/P to select [YES]
and press the Y/[REVIEW/SETI button, to
start audio recording.
5 Press the V/[REVIEW/SET] button, to
stop audio recording.
&raquo; Even if you do not press the
Y [REVIEW/SET] bution, after about
10 seconds the audio recording stops
automatically.
6 Press the [MENU] button.
&raquo; The menu will disappear.
&raquo; The audio dubbing cannot be used with motion
images.
* The audio dubbing cannot be used with
protected images. (P65)
a ны ' .
Technical use
Resizing Recorded Pictures
6
Er DEO= PRINT
D]; SLICE SHOW
&amp; AUDIO DUB,
A
FS TL
Ti
TR rE EAE
SELECT? SETO EXITE1
a EST
т IM &lt; ый
KA
EEE =| v EXTEN
DELETE ORIGINAL
PICTURE?
E
143
it is possible to reduce the recorded picture
— size. This function is useful if you want to
reduce the volume of the picture for the
purpose at attaching it to an e-mail or
uploading it to a web-site.
[Preparation]
&raquo; Set the mode dial to playback [()]. (P24)
1 Press the [MENU] button.
2 Press A/V to select [RESIZE] and
then press &raquo;.
3 Press &lt;/&gt; to select the picture, and
then press Y.
4 Press &lt;/ to select the size.
. : 1600 х 1200
. : 1280 x 960
. : 640 x 480. |
5 Pressthe Y/REVIEW/SET] button to
sei the size. ВЕ e
6 When this message is displayed ' |
“DELETE ORIGINAL PICTURE?”,
press &laquo;UP to select [YES] or [NO].
/ Press the V/REVIEW/SET] button.
8 Press the [MENU] button.
* The menu will disappear.
&laquo; itis not possible to resize pictures in a size lower
than/equal to [640 x 480] or with an aspect ratio
that is not 4:3.
* it may not be possible to resize the pictures
recorded with other equipment.
* itis not possible to resize a motion image/still
picture with audio.
69
неси неее ни нете mo Но) [О ›
Technical use Technical use
Trimming Recorded Pictures Formatting the Card
It is possible to cut off the unnecessary parts
_ of the picture (trimming), and enlarge the
remaining parts of the picture.
Usually, it is not necessary to format the card
(initializing). Format the card when this
message is displayed “MEMORY CARD
ERROR&quot;.
&laquo; When the card is formatted by a PC or other
equipment, format the card on the camera again.
[Preparation]
| * Setihe mode dial to playback [(&gt;]]. (P24)
| 1 234 1 Press the [MENU] button.
i 3 2
P tion] 2 Press A/V to select [FORMAT] and
| reparation then press &raquo;.
ol FEE &raquo; Set the mode dial to playback [(&gt;-)]. (P24) N x
DEPT ICONOS | 3 When this message is displayed
2 Press A/Y toselect [TRIMMING] and : | MEMORY CARD?”, press &lt;/b&gt; to
then press &gt;. : EEE select [YES].
3 Press 4/P to select the picture, and . 4 Press the V/[REVIEW/SET] button.
- then press Y. | e The card is formatted.
| b Ql ke . * After formatting, recorded images and any
3| ENE 4 Press the zoom button o ma | x
other data carinot be recovered.
100-0001
БН subject appear closer, [=] to make
subject appear further away. : 3
; SARIN
5 Press A/Y/-UP to shift pictures.
| |
SELECT 4&raquo; 6 Press the shutter button to set. +
di ley 7 When this message is displayed i TEE Ne
- “DELETE ORIGINAL PICTURE?”, 3 a
2043 JF 8 4 ep
4,5,0| ERG, BPs press &laquo;UP to select [YES] or [NO]. | чета ети
EIA! 3 press the V/REVIEW/SET] button. i
&gt; F
- 9 Press the [MENU] bution. ; . |
Co y s During formatting, do not tum the power off.
NEAR] y * The menu will disappear. + {i the card cannot be formatted, consult your dealer.
7 EGE e It is not possible to resize pictures in a size lower
than [640 x 480] or with an aspect ratio that is
not 4:3. и ictures +
PICTURE? | * You cannol operate rimming on pic +
PTE recorded with other digital cameras or other : 4
YES: я equipment. В E
* Trimming is not possible for a motion image
ape &iquest;still picture with audio.
Зо +. NAIL TA
м a OA ER LP Ea a TN Cry &quot;o
va Tee TR PML TW AT UA SEU a TNA EA @
. TEA LAI TOM TA
E TABERNA
E ENE TT tal pee ae a Te 8 1 OH SL NI E TE ELE E A PU AAA VEA =
WE ДТ LE . me: 170 я *
Technical use : Technical use
Adjusting the LCD Monitor Brightness | Using the Auto Review
You can adjust the brightness of the LCD | | Recording with the auto review set to
monitor. [ SEC.M3 SEC] the recorded picture is
- | automatically displayed on the LCD Monitor
[Preparation] for 1 or 3 seconds.
* Press the [DISPLAY] button to select the display
of LCD monitor. (P21) - [Preparation]
* Set the mode dial except for [Q]. (24) * Set the mode dial except for [(=} VW]. (P24)
1 Press the [MENU] button. 1 Press the [MENU] button.
2 Press P to open the setup menu. | 2 Press &gt; to open the setup menu,
3 Press A/Y to select [MONITOR]. | 3 Press A/V to select [AUTO REVIEW].
4 Press 4/&raquo; to adjust the brightness. 4 Press &laquo;/P to select [1 SEC.] or
- &lt;a [3 SEC.
5 Press the [MENU] bution.
a ; D Press the [MENU] button.
&raquo; The menu will disappear.
* The menu will disappear.
PERE] Ш + in simple mode [4 J, LCD monitor brightness is EEE
М: fixed to [0]. E DE
SELECT SETO EXIT En
* Even when setting the auto review to [1 SEC. ИЗ SEC.], itis not available in motion image
: mode [FER].
: * When recording in burst mode, auto bracket, still picture with audio modes, the recorded
Е picture is automatically displayed.
Е * in simple mode [W], the auto review setting becomes [ON] (1 second) or [OFF].
72
73
Technical use
Setting up the Operational Sound/Shutter
Sound |
eE
Su
о
It is possible to set the electronic shutter
sound when the shutter button is pressed all
the way and to set the sound volume when
the shutter button is pressed halfway and
when the menu operations are done.
EN When ihe operational mode dial is set
to REC mode
Press the [MENU] button.
MN —
Press P to open the setup menu.
* In simple mode, skip this step.
3 Press A/Y to select [BEEP] and then
press &raquo;.
4 Pressing A/Y/&lt;4/&raquo; to adjust the
operational sound volume and set the
shutter sound.
5 Press the [MENU] button twice.
* The menu will disappear.
EN When the operationa! mode dial is sei
to playback [(&raquo;}]
Press the [MENU] button.
Press &gt; to open the setup menu. —
Press A/Y to select [BEEP].
A OV № —
Press &laquo;/&raquo; to adjust the operational
sound volume.
Press the [MENU] button.
+ The menu will disappear.
&raquo; In simple mode [&sect;]. the setting becomes [ON] or [OFF].
da LE RE TE nL Fm eT TE 0€ “cam &Agrave; ee
SEERA EE Ear Wa и Do. О
74
‚ + rn ERA MEA, an ar me т Ap gre preg E - t&eacute; TT Cry
2 IEEE NA NAAA A MENA e AE ic a,
IRA EH mM TAN TT O O alar ur
Technical use
Setting up the Power Save Mode
In this mode, If the camera is not operated for
a certain amount of time, it is automatically
turned off,
1 Press the [MENU] button.
2 Press &gt; to open the setup menu.
3 Press A/V to select [POWER SAVE].
4
Press &laquo;&gt; to choose the setting time.
* [2 MIN]
* [5 MIN]
&laquo; [16 MIN]
* [OFF]: The power is not turned off
automaticaliy.
5 Press the [MENU] button.
* The menu will disappear.
* If you want to cancel the power save mode, turn the i i
hid , power switch to [ON] agai
tuming it to [OFF], or press the shutter button. JON} again after
* When using the AC adaptor/connecting to a PC/recordin ion i i
mia варю g the motion image/pi back
the motion image/during slide show, the power save mode is not available. Playing bac
* in simple mode [4], the power save is fixed to [2 MIN].
* In recording m |
mode tao ode, when keeping the [DISPLAY] button pressed for 2 seconds, power save
75
я Оо re Ty TT moe
+: A Ae AE a NE a
FA
ye
is
e
MES
eee E
LANGUAGE
SELECT |
4
dit NO.RESET
ВЕЗЕТ НЕ МО,
IN THE CAMERA?
ol
SER SETY
eg | hm x fm sr, Te To Te
оне ETT FL ew pat 5 ni&eacute; Her E i e =&gt; Te oT
Technical use
Resetting the File Number
As the file numbers are recorded sequentially
by the camera, when you use two or more
cards, it may happen that the file numbers on
your cards do not start from 0001.
Use this function when you insert a new card
or perform the new recording on the recorded
card and you want to start recording from the
file number 0001.
[Preparation]
e Set the mode dial except for [(} VW]. (P24)
1 Press the [MENU] button.
2 Press &gt; to open the setup menu.
3 Press A/V to select [NO.RESET] and
then press &raquo;.
4 When this message is displayed
“RESET FILE NO. IN THE
CAMERA?” press 4/1 to select
[YES].
5 Press the Y/[REVIEW/SET] button.
6 Press the [MENU] button.
* The menu will disappear.
У = =
IAEA
SELECT: SETH EXITED
RESET REC SETTINGS?
RESET SETUP
PARAMETERS?
Е
pu
Technical use
Initializing the settings
The settings are initialized using this function.
[Preparation]
* Set the mode dial except for (&gt;) TW]. (P24)
1 Press the [MENU] button.
2 Press P to open the setup menu.
3 Press A/V to select [RESET] and
then press &raquo;.
4 When this message is displayed
“RESET REC SETTINGS?”, press
“&gt; to select [YES].
5 Press the V/{REVIEW/SET] button.
* The message &quot;REC SETTING RESET
COMPLETED&quot; is displayed for about
2 seconds.
6 When this message is displayed
“RESET SETUP PARAMETERS ?”,
press &laquo;Ub to select [YES].
|
Press the V/[REVIEW/SET] button 16
set. EE
* The clock setting is not reset.
8 Press the [MENU] button.
+ The menu will disappear.
77
Technical use
Playing Back Images with a TV Monitor
By connecting the camera to a television via
the supplied A/V cable (7, it is possible to
view and play back the recorded images.
[Preparation]
Turn the camera and the television off:
Connect the AV cable to the A/V QUT
socket of the camera.
Connect the A/V cable to the v&iacute;deo in
and the audio in sockets of the TV.
e Yellow: to the video in socket
* White: to the audio in socket
Turn the television on and select
external input ”
Turn the camera on and then set the
mode dial to playback [[(&raquo;]].
&laquo; The image is displayed on the television.
J Viewing images in other countries
When setting [VIDEO OUT] an the menu, you can view images on the TV in other
countries (regions) which use the NTSC or PAL system.
* When connecting to a TV, we recommend using the AC adaptor as the power source. (P16)
* Do not use any other cables except the supplied one.
* Only when the made dial is set to playback [(&gt;)], the image is displayed on the TV.
* Read the TV operating instructions too.
r
e, ART PUDE A DAA TT ALO TD ATi AEREA, A Bae TEA
1 : No : e - LC ATL EA - - AR Be ле, =
Technical use
Connecting to a PC -
[Preparation]
&laquo; Only if using Windows&reg; 98 or Windows&reg; 98
Second Edition, start the supplied CD from the
PC and install the USB driver.
| Insert the Memory Card into the
camera, and turn the power switch to
[ON].
2 Connect the camera to a PC via the
supplied USB connection cable (3).
[Windows]
The removable drive is shown in [My
computer]. -
&laquo; If is the first time you are connecting the
camera to a PC, the required driver is
installed automatically so that the camera...
can be recognized by the Windows Plug'and
Play then ft is shown on the [My computer]
older.
[Macintosh]
The drive is shown on the screen.
* The flash/access indicator fights during access.
* When connecting to a-PC, we recommend using the AC adaptor as the power source. (P16)
* When connecting to a PC, pictures and sounds are not output from the A/V out socket.
* For further information (software installation), read the supplied operating instructions for
PC connection.
79
Technical use Technical use
USB DIRECT-PRINT USB DIRECT-PRINT (Single Picture)
By connecting the camera to a printer : [Preparation]
corresponding to USB DIRECT-PRINT via the ; * Connect the camera to a printer. (P80)
supplied 082 connection cable, it is possible : 1 | 1 Only when DPOF is already set, press
lo print directly. | i &lt;/&gt; to select [SINGLE PICTURE],
(Please ask the manufacturer of the printer : DIRECT PRINT and then press the V/[REVIEW/SET]
about the corresponding models) ; button.
{Read the printer operating instructions too) |
| SINCE POR: | * When DPOF is not set, this screen is
1 Insert the Memory Card into the PICTURE | skipped. |
camera, and turn the power switch to [ 2 Press 4/P to select the picture to be
[ON] | EEES printed, and then press the —
2 Turn on the printer. 2 VAREVIEW/SET] button.
- . [a * The message &quot;PLEASE SELECT THE
3 Connect the camera to the printer via 100-0001 PICTURE TO PRINT&quot; is displayed for
the supplied USB connection cable 11/10 2 seconds,
D. ; EEE] — 3 Press A, and press &lt;/&gt; to set the
: THE PICTURE TO PRINT number of sheets, and then press the
1 Y/REVIEW/SET] button.
* When connecting to a printer, we recommend SELE es &raquo;
&Agrave; using the AC adaptor as the power source. (P16)
&Agrave; + Disconnect the USB connection cable and DC
4 Press &lt;P to select [YES].
&raquo; The message &quot;PLS CHECK THE PRINTER.
cable after printing. DIRECT PRINT START PRINTING 2&quot; 15 displayed.
LS CHECK THE PRINTER 5 Pressthe VAREVIEW/SET] button: -
* Printing starts.
* Press the [MENU] button, and you can stop
printing.
|
NOW PRINTING
| UNE
80 81
TET EET TT р se
Sener ind ER 0 CT
EE PET ES
Technical use
USB DIRECT-PRINT (DPOF) After Use
[Preparation]
s Connect the camera to a printer. (780)
+ Write the print information to the card (DPOF
setting). (P62)
1 Press &lt;/P to select [DPOF].
&laquo; Press the [MENU] button, and you can
change the DPOF setting. (P62)
SINGLE- Bee 2 Press the V/REVIEW/SET] button.
PICTURE
F The message “PLS CHECK THE PRINTER.
EERE START PRINTING ?” is displayed.
= 3 Press &laquo;/bP to select [YES], and then
DIRECT PRINT
2 press the Y /[REVIEW/SET] button.
DIRECT PRINT e Printing starts.
PLS CHECK THE PRINTER
START PRINTING ?
* Press the [MENU] button, and you can stop ;
printing.
&laquo; When the number of total images is more than
255, the number of remaining images will be
displayed as “————”.
3
00-0001!
wi
NOW PRINTING | 1 battery again, set the datetime)
REMAIN 8 |
CANCEL = | |
82
етот ору 3 =. ~ We es
TY ERT Г
RES EE rt
+,
С
Ty
1
Technical use
After using the camera and after following
steps, it is recommended to place it in the
optional soft case, in order to protect it.
1 Turn the power switch to [OFF]. (P19)
Eject the card. (P17)
№
3 Remove the battery. (P14)
* H you will not be using the camera for a long time, remove the battery. (When you insert the
83
The Menu Items
1 EES Ew]
2 HEISE № ос
3 E
4-HEa EEE
re AN TE ant =
RIES 3 MONITOR |
LR EL) AUTO REVIEW,
12-00
13TH a
16— E) CLOCK SET
TN ue |
TETRIS
+
SELECTS
Others
REC mode menu
W.BALANCE (P51)
PICT.SIZE (P39)
QUALITY (P40)
SPOT MODE (P46)
E wo
SENSITIVITY (P53)
AUDIO REC. (P38)
CONT.AF (P36)
D.ZOOM (P33)
C++ &copy; 0
9 PICT.ADJ. (P50)
10 MONITOR (P72)
11 AUTO REVIEW (P73)
12 BEEP/SHUTTER (P74)
13 POWER SAVE (P75)
- ”
14 NO.RESET (P76)
15 RESET (P77)
16 CLOCK SET (P26)
17 LANGUAGE
. r - мачт DES тео рук рулем ест т A TENA
- = a, da Ne TA TO &quot; oe 4.7 + Te EA E ARI ANNA Ea IA E Has JO J o
e TA TL a Le nte сено! + - IRE O ra ET RETA E,
ne TRE E a au ETA Л Wr OT . BEER hha hn a Hs TS me Eire AE EE es SU
Te . - . JE ET У =
: Others
Simple mode menu
&raquo; For items without number, refer to those with the
same name.
Fr Les jet a ee
18
18 PICT.MODE (P29)
ы Rea. FE
Lis LE
T@AUTOREVIEW &copy;
Weber 65
@clockser
SELECT&raquo; SETO EXITED|
pr A ем океана
Playback mode menu
+ For items without number, refer to those with the
same name.
19 PROTECT (P65)
20 DPOF PRINT (P62)
21 SLIDE SHOW (P66)
22 AUDIO DUB. (P68)
22-. SNIE 23 RESIZE (P69)
23— lan&quot; E=i=i=i745
SELECTS SETH EXT |
[Lo PROTECT
24 TRIMMING (P70)
25 FORMAT (P71)
e a E ae
+ E Ra ar Ee
25— N FORMAT
SELECT&raquo; SETO EXIT]
TNA EUA
[pa
&gt; MONITOR
26— FE
CE 26 VOLUME (P56)
27 VIDEO OUT (P78)
A Rel a amma. sen re
: ONCE En
A ATEN Soren
Pad ia ME
i+ LANGUAGE
: ais VIDEO OUT
4 SELECT$ SETO EXIT]
85
я Lo Pon A e
y TRA on SN A
ЖА то SES + E Ts . TA AE EA DEI д wot.
pd EE ry or Е Ро Ty ERE EU. TN
UTA TICO PERA A Ne EE =
Others
Cautions for Use
J} Cautions for Use
Keep the digital camera away from
magnetized equipment (such as a
microwave oven, TV, video game
equipment, etc.).
&laquo; if you use the digital camera on or near a
TV, images and sounds may be disturbed
due to electromagnetic wave radiation.
* Do not use the digital camera near a cell
phone because doing so may cause noise
to adversely affect the images and sounds.
* Recorded data may be damaged, or
images may be distorted by strong
magnetic fields created by speakers or
large motors.
&laquo; Electromagnetic wave radiation generated
by a microprocessor may adversely aifect
the digital camera, causing the disturbance
of images and sounds.
= [f the digital camera is affected by
magnetically charged equipment and does
not function properly, turn the camera ofi
and detach the battery or AC adaptor and
then connect the battery or AC adaptor
again. Thereafter, turn the camera on.
Do not use the digital camera near
radio transmitters or high-voltage
lines.
* If you record near radio transmitters or
high-voltage lines, recorded images or
sounds may be adversely affected.
Do not spray insecticides or
voiatile chemicals onto the digitai
camera.
&raquo; If the digilal camera is sprayed with such
chemicals, the camera body may be
damaged and the surface finish may peel
off.
&laquo; Do not keep rubber or plastic products in
contact with the digital camera for a long
period of time.
When you use the digital camera
on a beach or similar place, do not
let sand or fine dust get into the
camera.
* Sand or dust may damage the digital
camera or card, (Care should be taken
when inserting and removing the card)
When you use your digital camera
on a rainy or snowy day oron a
beach, make sure that no water
enters the digital camera.
* Water may cause the digital camera or
card to malfunction. (Irreparable damage
may occur) -
&laquo; Н sea water splashes onto the digital
camera, wet a soft cloth with tap water,
wring it well, and use i to wipe the camera
body carefully. Then, wipe it again
thoroughly with a soft dry cloth.
Do not use the digital camera for
surveillance purpose or other
business use.
e | you use the digital camera for a long
period of time, the intemal temperature
increases and, consequently, this may
cause malfunction.
'* The digital camera is not intended for
business use,
7 = с a.
&gt; TE ar
ESTA
TE
TU x
A EE
er 3 ; a e
HITHER лу SE =
4A i pg
T ELE Ea A №
а т
EA e] TE
Amy a A TT E
IT ; od er ;
Others
Do not use benzine, thinner or
aicohoi for cleaning the digital
camera.
* The camera body may be deformed and
the surface finish may peel off.
* Before cleaning the camera, detach the
battery or pull out the AC adaptor from the
electrical outlet,
+ Wipe the digital camera with a soft, dry
cloth. To remove stubborn stains, wipe
with a cloth that is soaked in a detergent
diluted with water and afterward finish
wiping with a dry cloth.
= For storing or transporting the digital
camera, place it in a bag or case lined with
soft pads to prevent the coating on the
camera body from being worn.
After use, be sure to take the card
out, and detach the battery or puil
out the AC adaptor from the
electrical outlet.
* If the battery is left on the digital camera
for a long time, the voltage drops
excessively, and the battery will not
function even after it is recharged.
EN Optimal Use of the Battery
The battery is a rechargeable lithium ion
battery. Its ability to generate power is
based upon the chemical reaction that
takes place inside it. This reaction is
susceptible to the surrounding
temperature and humidity, and, if the
temperature is too high.or too low, the
operating time of the battery will be
shorter.
Be sure to detach the battery after
use.
Be sure to detach the battery from the
digital camera. (It it is left attached to
the digital camera, a minute amount of
current is consumed even when the
digital camera power is off) If the battery
is left attached to the digital camera for
a long time, discharge takes place. The
battery may become unusable even
after it is charged.
87
в E TET AO y .
pi a Але
: fom
SOU AE
Dispose of an unusable battery.
* The battery has a limited life.
* Do notihrow ihe battery into fire because it
may cause an explosion.
Always keep the terminals of the
battery clean.
Prevent the terminals from getting
clogged with dirt, dust, or other
substances.
If you drop the battery accidentally,
check to see If the battery body and
terminals are deformed. Attaching a
deformed battery to the digital camera
may damage the camera.
Others
ll Condensation
When condensation has taken
place:
Set the power switch to [OFF] and
leave the digital camera in this
condition for about 1 hour. When
the camera becomes close to the
ambient temperature, the fog
disappears naturally.
Jl Cautions for Storage
Before storing the digital camera, take
the card out and detach the battery.
Store all the components in a dry place
with a relatively stable temperature.
(Recommended temperature:
15 to 25&deg;C,
Recommended humidity:40 to 60%)
Digital camera
* Wrap it with a soft cloth to prevent dust
from getting into the camera.
&laquo; Do not leave the camera in places that
expose it to high temperature.
Battery
&raquo; Do not ieave the camera and the battery at
the place where the temperature is 100
high, such as inside the car during the
midsummer.
&laquo; Extremely high or low temperatures will
shorten the life of the battery.
&raquo; If the battery is kept in smoky or dusty
places, the terminals may rust and cause
malfunctions.
+ Do not allow the battery terminals to come
in contact with metal objects {such as
necklaces, hairpins, etc.). This can result
in a short circuit or heat generation and, if
you touch the battery in this condition, you
may be badly burned.
= Store the battery in a completely
discharged state. To store the battery for a
long period of time, we recommend
charging it once every year and storing it
“ again after you completely use up the
charged capacity.
Card
+ When the card is being read, do not
remove the card, turn off the power, or
subject it to vibration or impact.
Do not leave the card in places where
there is high temperature or direct sunlight,
or where electromagnetic waves or static
electricity are easily generated.
+ Do not bend or drop the card. The card or
the recorded content may be damaged.
&raquo; After use, be sure to remove the card from
the digital camera.
&raquo; Do not touch the terminals on the back of
the card with your fingers. Do not allow
dirt, dust or water to enter it.
AC adaptor - |
&laquo; |f the battery is warm, charging takes a
longer time than normal.
&laquo; If you use the AC adaptor near &agrave; radio,
radio reception may be disturbed. Keep
the AC adaptor 100 cm or more away from
radio.
&raquo; When the AC adaptor is in use, it may
generate whirring sounds. However, this is
normal.
&raquo; After use, be sure to disconnect the AC
Mains Lead. (If it is left connected, a
minute amount of current is consumed)
* Keep the electrodes of the AC adaptor and
battery clean at all times.
Others
EN LCD Monitor
LCD Monitor
* In a place with drastic temperature
changes, condensation may form on the
LCD Monitor. Wipe it with soft dry cloth.
* lt the digital camera is extremely cold when
you turn the power on, the image on the
t CD Monitor is slightly darker than usual at
first. However, as the internal temperature
increases, It goes back to the normal
brightness.
Extremely high precision technology
is employed to produce the LCD
Monitor screen featuring a total of
approximately 114,000 pixels. The
result is more than 99.99% efiective
pixels with a mere 0.01% of the
pixels inactive or always lit.
However, this is not a malfunction
and does not affect the recorded
picture,
Ш SD Slide Show
If setting the SD slide show with the [SD
Viewer for DSC] which is in the supplied
CD-ROM, when playing back, the
message “START SD SLIDE SHOW?”
is displayed.Select [YES] and press the
Y AREVIEW/SET] button to start the SD
slide show. Select [NO] and press the
V/[REVIEW/SET] button to start normal
playback. — |
EN Folder Composition
When a Memory Card with data
recorded on it is inserted into a PC, the
folders shown below will be displayed.
SD Memory
Card
[EXPORT]
* In the 100_PANA folder it is possible to
record up to 999 images.
* In the MISC folder it is possible to record
the files that have been set with DPOF
settings.
88 Г 89
- 1 CI edt A
me TE CAR RTE Ae TT In E ee DOE E A Tee = ET TAE AE an Ea IRD E Aa
DEA EI E ue ВОТ FEO ES. TAL RENE A AE DT AA ESA EE E
Ed : i : „77 EE TES
Others
Warning Indications
[NO MEMORY CARD]
Insert the Memory Card.
[THIS MEMORY CARD IS
PROTECTED]
Cancel the Memory Card lock.
[NO VALID IMAGE TO PLAY]
Carry out playback after recording or
after inserting the Memory Card with a
recorded image.
[MEMORY CARD FULL]/ [NO
ENOUGH MEMORY IN THE CARD]
Insert a new Memory Card or delete
unnecessary data,
[MEMORY CARD ERROR]
Failed access to Memory Card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Turn the camera [OFF] and remove the
card. Then insert the card and turn the
camera back [ON]. Be sure camera is
[OFF] before removing or inserting the
card to avoid damaging the card.
[PLEASE SET THE CLOCK]
This message is displayed when you
use the camera for the first time or you
do not use the camera for a long time.
Set the clock again.
[THIS PICTURE IS PROTECTED]
After cancelling the protect setting, you
can delete or overwrite the image.
Li e A
[THIS PICTURE CAN'T BE
DELETED] / [SOME PICTURES
CAN'T BE DELETED]
If the image is not based on the DCF
standard, it is not possible to delete
selected pictures.
[NUMBER OF PRINT IS OVER]
You have exceeded the number of
images that can be set at once with
multi-deleting setting.
[CANT BE SET ON THIS PICTURE] |
J {CAN'T BE SET ON SOME
PICTURES] о,
If the image is not based on the DCF
standard, it is not possible to set the
DPOF.
[MEMORY CARD ERROR
FORMAT THIS CARD?]
The format of this card cannot be A
recognized by the camera. Format the
card again with the camera.
[REC MODE DIAL IS NOT IN THE
PROPER POSITION]
This message is displayed when you
turn on the camera with the mode dial in
the wrong position.
Rotate the mode dial to the proper
position.
90
Others
Troubleshooting
1-1:
1-2:
3:
3-1:
3-2:
3-3:
The power does not turn on.
Are the battery and the AC adaptor
correctly connected? Check the
connection.
is the battery sufficiently charged?
Use a battery that has been
sufficiently charged.
As the power is turned or, it
turns off immediately.
Is the battery charge insufficient to
operate the camera? Charge the
battery or replace it with charged
one.
Has condensation occurred?
Carrying the digital camera from a
cold place to a warm piace could
cause condensation fo form inside
the camera. Wait until
condensation disappears.
The image cannot be recorded.
Is the Memory Card inside?
Is the mode dial correcily set ?
Check it.
There is no memory capacity left on
the card. Before recording, delete
some images.
The image is not displayed on
the LCD monitor.
Is the LCD monitor set to OFF?
The LCD monitor is too bright or
dark.
Adjust the brightness of the LCD
monitor.
Flash does not light.
The flash mode is set to forced OFF.
Change the flash mode.
The display or images on the
LCD monitor are not focused.
Set the mode dial to the mode
corresponding to the distance to the
subject.
91
9-1:
9-2:
10:
10-1:
10-2:
Hl:
14-1:
11-2;
The image will not play back.
Is the Memory Card inside?
There is no image in the Memory
Card.
The mode dial is not set to
playback [(&gt;]].
The image is not displayed on
the television.
Is the camera correcily connected
with the TV? Check it.
Set the TV to video input mode.
When connecting to a PC,
images cannot be transferred.
Check that the camera is correctly
connected to the PC.
Is the camera correctly recognized
by the PG?
The clock setting is reset.
If you do not use the camera for a
long time, the clock setting may be
reset. When the message “&copy;
[PLEASE SET THE CLOCK]
appears, set the clock again.
When you take a picture before
setting the clock, [0:00 0. 0. OJis
recorded.
others
Specifications
Digitai Camera Information for your safety
Power Source: DC 4.7 V
Power Consumption: 2.1 W (When recording with LCD Monitor to on)
1.6 W (When recording with LCD Monitor to off)
1.8 W (When playing back with LCD monitor)
Effective number of pixels
Image sensor
Lens
Digital zoom
Focus
Focus range
Shutter system
Burst recording
Motion image recording
ISO sensitivity
Shutter speed
White balance
Exposure (AE)
Metering mode
LCD monitor
Optical finder
Flash
Microphone
Speaker
Recording media
Recording size
Quality
3.2 Million Pixels
1/2.5 inch CCD, total pixel number 3,340,000
Primary colour filter
Optical 3x zoom, {=5.8 - 17.4 mm {35 mm film camera
equivalent: 35 - 105 mm)/F2.8 - 4.9
Max 3x
Auto/Macro
Spot AF (Spot mode)
Auto: 50 cm (Wide)/50 cm (Tele) - &copy;,
Macro/Simple/Colour effect: 10 cm (Wide)/
30 em (Tele) - &copy;
Electronic shutter + Mechanical shutter
4 frames/second, Max 8 frames (standard)/
5 frames (fine)
320 x 240 (10 frames/second with audio)
AUTO/50/100/200/400
8 - 172,000
Motion image mode: 1/30 - 1/2,000
AUTO/DaylightCloudy/Halogen/White set
Program AE
Exposure compensation (1/3 EV Step, —2 - +2 EV)
Multi/Spot (Spot mode)
1.5 inch low-temperature polycrystalline TFT LCD
(114,000 pixels} (field of view ratio 100 %)
Real-image zoom finder |
flash range: (150100) -
Approx. 30 ст - 2.4 m (Wide)/Approx. 30 cm - 140 cm
(Tele)
AUTO, AUTO/Red-eye reduction, Forced ON, Slow
sync./Red-eye reduction, Forced OFF
Monaural
Monaural 2
SD Memory Card/MultiMediaCard
2048 x 1536, 1600 x 1200, 1280 x 960, 640 x 480
(Still picture)
320 x 240 (Motion image)
Fine/Standard
Recording file format
Still Picture
Still picture with audio
Motion image
Interface
Digital
Analog video/audio
Terminal |
USB
Analog video/audio
DC IN
Dimensions (W x H x D}
Weight
Operating Temperature
Operating Humidity
AC adaptor (Panasonic DE-929B)
Others
JPEG (Design rule for Camera File system, based on
Exif 2.2 standard), DPOF corresponding
JPEG {Design rule for Camera File system, based on
Exif 2.2 standard)
+ 640 x 480 QuickTime Motion JPEG (still picture with
audio)
QuickTime Motion JPEG (motion image with audio)
USB
NTSC/PAL Composite/Audio line output (monaural)
5 pin Mini USB
&reg; 2,5 mm jack
ElAJ type 2 jack
104 x 50.8 x 32.1 mm (excluding the projection part)
Approx. 160 g (excluding Memory Card and battery)
Approx. 180 g (with Memory Card and battery)
0&deg;C - 40&deg;C
10% - 80%
information for your safety
input 110 - 240 V~ 50/60 Hz, 0.22A
Output DIGITAL CAMERA 4.7 V=1.5A
CHARGE 4.2 V==0.65 A
Battery pack (lithium-ion)
(Panasonic CGA-S001F) Information for your safety
| Voltage/capacity 3.6 Y, 680 MAh
93
">
Hello! I am an AI chatbot specifically trained to assist you with the Panasonic DMCF1B Operating instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!