Kenmore Freezer 795.6929 User manual

®
TOP FREEZER REFRIGERATOR
i
CONGELADOR
SUPERIOR
CONGI_LATEUR
REFRIGERADOR
SUPI_RIEUR REFRIGI_RATEUR
Models / Modelos / Mod_les
795.6997_,795.6991_
795.7997_,795.7991_
795.6937_,795.6929_
795.7937_,795.7929_
= color number, n_mero
de colo_ num_ro de couleur
tl1
Z
O
t=,
m
cn
z
m
Z_
O
r=,,
"13
Z
m
MFL61920619
Printed in Mexico
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.cem
Warranty and Product Record
3-4
Crisper Humidity Control
Door Racks
Safety instructions
Grounding Requirements
Parts and Features
20-21
5-6
6
Door Bins
21
Dairy Bin/Can Rack
21
Ice Tray
21
7
22-23
Care and Cleaning
Refrigerator
installation
2O
8-15
General Cleaning Tips
22
Unpacking Your Refrigerator
8
Outside
22
Installation
8
Inside Walls
22
Base Grill
8
Door Liner and Gaskets
22
22
Removing and Replacing Doors
9-10
Plastic Parts
Reversing Doors
10-15
Light Bulb Replacement
Leveling and Door Closing/
Door Alignment
Using Your Refrigerator
15
22-23
Power Interruptions
23
Vacation and Moving Care
23
16-21
About the Automatic
Ensuring Proper Air Circulation
16
Setting the Controls
16
Adjusting Control Settings
17
Food Storage Guide
17
Storing Frozen Food
18
Refrigerator Shelves
19-21
Snack Drawer
19
Crisper and Crisper Cover
2O
Connecting
Ice Maker
the Water Line
Troubleshooting
Guide
24
25-27
28-31
TOP FREEZER REFRIGERATOR
®
Kenrnore Appliance Warranty
forte Year Limited Warranty
When installed, operated and maintained according to all instructions supplied with the product, if this appliance fails due
to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME '°_to arrange for
free repair.
If this appliance is used for other than private family purposes, this warranty applies for only 90 days from the date of
purchase.
This Warranty covers only defects in material and workmanship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use, including but not limited to filters, belts, light bulbs, and bags.
2. A service technician to instruct the user in correct product installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed, operated or maintained according to all instructions supplied
with the product.
5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its intended
purpose.
6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils other than
those recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from unauthorized modifications made to this product.
Disclaimer of imptied warranties; limitation of remedies
Customer's sole and exclusive remedy under this limited warranty shall be product repair as provided herein. Implied
warranties, including warranties of merchantability or fitness for a particular purpose, are limited to one year or the
shortest period allowed by law. Sears shall not be liable for incidental or consequential damages. Some states and
provinces do not allow the exclusion or limitation of incidental or consequential damages, or limitations on the duration
of implied warranties of merchantability or fitness, so these exclusions or limitations may not apply to you.
This warranty applies only while this appliance is used in the United States and Canada.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Sears Canada, Inc., Toronto, Ontario, Canada MSB 2B8
Master Protection
Agreements
Congratulations on making a smart purchase. Your new
Kenmor# _ product is designed and manufactured for years
of dependable operation. But like all products, it may
require preventive maintenance or repair from time to time.
That's when having a Master Protection Agreement can
save you money and aggravation.
The Master Protection Agreement also helps extend the life
of your new product. Here's what the Agreement* includes:
[] Parts and labor needed to help keep products operating
properly under normal use, not just defects. Our
coverage goes well beyond the product warranty. No
deductibles, no functional failure excluded from
coverage = real protection.
[] Expert service by a force of more than 10,000
authorized Sears service technicians, which means
someone you can trust will be working on your product.
[] Unlimited service calls and nationwide service, as
often as you want us, whenever you want us.
[] "No-lemon" guarantee- replacement of your covered
product if four or more product failures occur within
twelve months.
[] Product
Fixed.
replacement
Once you purchase the Agreement, a simple phone call is
all that it takes for you to schedule service. You can call
anytime day or night, or schedule a service appointment
online.
The Master Protection Agreement is a risk free purchase.
If you cancel for any reason during the product warranty
period, we will provide a full refund. Or a prorated refund
anytime after the product warranty period expires.
Purchase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices and
additional information in the U.S.A. call 1-800-827-6655.
*Coverage in Canada varies on some items. For full
details call Sears Canada at 1-880-361-6655.
Sears Installation Service
For Sears professional installation of home appliances,
garage door openers, water heaters, and other major
home items, in the U.S.A. or Canada call
1 =800=4=MY=HOME_'.
if your covered product can't be
[] Annual Preventive Maintenance Check at your
Request = no extra charge.
[] Fast help by phone = we cal! it Rapid Resolution =
phone support from a Sears representative on all
products. Think of us as a "talking owner's manual."
[] Power surge protection
to power fluctuations.
against electrical damage due
[] $250 Food Loss Protection annually for any food
spoilage that is the result of mechanical failure of any
covered refrigerator or freezer.
[] Rental reimbursement
if repair of your covered product
takes longer than promised.
[]18% discount off the regular price of any non-covered
repair service and related installed parts.
In the space below, record the date of purchase, model and serial number of your product. You will find the model and
serial number printed on an identification label located on the right-hand side of the refrigerator compartment. Have
these items of information available whenever you contact Sears concerning your product.
Model No.
Date of Purchase
Serial No.
Dealer
Save these instructions and attach your sales receipt for future reference.
Thisguidecontainsmanyimportantsafetymessages.
Alwaysreadandobeyallsafetymessages.
Thisis thesafetyalertsymbol.It alerts you to safety messages that inform you
of hazards that can kill or hurt you or others, or cause damage to the product.
All safety messages will be preceded by the safety alert symbol and the hazard
signal word DANGER, WARNING or CAUTION. These words mean:
You will be killed or seriously injured if you don't follow instructions.
You can be killed or seriously injured if you don't follow instructions.
Indicates
may
resultaninimminently
minor or moderate
hazardousinjury,
situation
or product
which,damage
if not avoided,
only.
All safety messages will identify the hazard, tell you how to reduce the chance of injury and tell you what can happen if
the instructions are not followed.
To reduce the risk of fire, electric shock or injury
to persons when using your product, basic safety
precautions should be followed, including the following:
= NEVER unplug your refrigerator by pulling on the power cord.
Always grip the plug firmly and pull it straight out from the
outlet.
• Repair or replace immediately all electric service cords that
have become frayed or otherwise damaged. Do not use a cord
that shows cracks or abrasion damage along its length or at
either the plug or connector end.
° When moving your refrigerator away from the wall,
be careful not to roll over or damage the power cord.
• DO NOT store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
- DO NOTallow children to climb, stand or hang on the
refrigerator doors or shelves in the refrigerator.They could
damage the refrigerator and seriously injure themselves.
- Keep fingers out of "pinch point" areas; clearances between
the doors and between the doors and cabinet are necessarily
small. Be careful closing doors when children are in the area.
- Unplug your refrigerator before cleaning or making any repairs.
NOTE: We strongly recommend that any servicing be
performed by a qualified individual.
- Before replacing a burned-out light bulb, unplug the
refrigerator or turn off power at the circuit breaker or fuse box
in order to avoid contact with a live wire filament. (A burnedout light bulb may break when being replaced.) NOTE: Setting
either or both controls to the OFF position does not remove
power to the light circuit.
• Do not store bottles in the freezer compartment - they may
break when frozen, causing damage.
, For personal safety,this appliance must be properly grounded.
Have the wall outlet and the circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
° Read all instructions before using this appliance.
• Use this appliance only for its intended purpose as described
in this use and care guide.
° This refrigerator must be properly installed in accordance with
the Attention Installer Instructions that were taped to the front
of the refrigerator.
° After your refrigerator is in operation, do not touch the cold
surfaces in the freezer compartment when hands are damp or
wet. Skin may adhere to the extremely cold surfaces.
° In refrigerators with automatic icemakers, avoid contact with
the moving parts of the ejector mechanism, or with the heating
element that releases the cubes. DO NOT place fingers or
hands on the automatic icemaking mechanism while the
refrigerator is plugged in.
• DO NOT refreeze frozen foods which have thawed completely.
The United States Department of Agriculture in Home and
Garden Bulletin No. 69 says:
"...Youmay safely refreeze frozen foods that have thawed if
they still contain ice crystals or if they are still cold below
40°F (4°C).,,
"...Thawed ground meats, poultry or fish that have any off-odor
or off-color should not be refrozen and should not be eaten.
Thawed ice cream should be discarded. If the odor or color of
any food is poor or questionable, get rid of it. The food may be
dangerous to eat."
"Even partial thawing and refreezing reduces the eating quality
of foods, particularly fruits, vegetables and prepared foods.
The eating quality of red meats is affected less than that of
many other foods. Use refrozen foods as soon as possible to
save as much of their eating quality as you can."
SAVE THESE INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduce physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Child entrapment and suffocation are not problems of
the past. Junked or abandoned refrigerators are still
dangerous.., even if they will sit for "just a few days".
If you are getting rid of your old refrigerator, please
follow the instructions at right to help prevent accidents.
Your old refrigerator may have a cooling system that
used CFCs (chlorofluorocarbons). CFCs are believed to
harm stratospheric ozone. If you are throwing away your
old refrigerator, make sure the CFC refrigerant is
removed for proper disposal by a qualified servicer. If
you intentionally release this CFC refrigerant, you can
be subject to fines and imprisonment under provisions
IMPORTANT:
TO CONNECT
Please read carefully.
ELECTRICITY
Electrical Shock Hazard
FOR PERSONAL SAFETY, this appliance must be
properly grounded. Have the wall outlet and the
circuit checked by a qualified electrician to make sure
the outlet is properly grounded.
grounding type
3-prong
wall receptacle _
_._
,
3-prong
grounding
plug
Ensure proper
ground exists
before use.
USE OF EXTENSION
Before you throw away your old
Refrigerator or freezer:
• Take off the doors.
• Leave the shelves in place so that children
may not easily climb inside.
of environmental legislation. This appliance contains
fluid (refrigerant, lubricant), and is made of parts and
materials which are reusable and / or recyclable. All the
important materials should be sent to the collection
center of waste material and can be reused after rework
(recycling). To recycle, please contact your local agency.
Use of an extension cord will increase the clearance
needed for the back of the refrigerator. If the supply cord
is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order
to avoid any hazard.
RECOMMENDED
GROUNDING
METHOD
The refrigerator should always be plugged into its own
individual properly grounded electrical outlet rated for
115 volts, 60Hz, AC only and fused at 15 or 20 amperes.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a
fire hazard from overheated wires. It is recommended
that a separate circuit serving only this appliance be
provided. Use a receptacle which cannot be turned off
with a switch or pull chain. Do not use an extension cord.
Where a standard two-prong wall outlet is encountered,
it is your personal responsibility and obligation to have
it replaced with a properly grounded three-prong wall
outlet. Do not, under any circumstances, cut or remove
the third (Ground) prong from the power cord.
CORDS
Because of potential safety hazards under certain
conditions, we strongly recommend against the use of
an extension cord. However, if you still elect to use an
extension cord, it is absolutely necessary that it be a
UL-listed (in the United States), 3-wire grounding type
appliance extension cord having a grounding type plug
and outlet, and that the electrical rating of the cord be
15 amperes (minimum) and 120 volts.
NOTE: Before performing any type of installation,
cleaning, or removing a light bulb, turn the control
(Thermostat, Refrigerator Control or Freezer Control,
depending on the model) to OFF and then disconnect
the refrigerator from the electrical source. When you
are finished, reconnect the refrigerator to the electrical
source and reset the control (thermostat, refrigerator
control or freezer control, depending on the model) to
the desired setting.
©
Use this section to become more familiar with the parts and features. Page references are included for your
convenience.
NOTE: This guide covers several different models. The refrigerator you have purchased may have some
or all of the items listed below. The locations of the features shown betow may not match your model.
O
CustomCube
O
Ice Bin *
OFreezer
Freezer Shelf
OCan
Rack*
Digital Temperature Control
ODairy
Bin
Refrigerator Light
O
_
_t
Ice maker *
Snack Drawer
Shelves
Crispers
Keeps fruits and vegetables fresh and crisp
Door Racks
Door Bins
Refrigerator Door Rack
*On some models
ExcessiveWeightHazard
Usetwoor morepeopleto moveandinstall
NOTE: For proper air circulation, best cooling and energy
consumption results, maintain a minimum distance
of 2 inches (5.08cm) from adjacent items and surfaces.
refrigerator.
Failure to do so can result in back or other injury.
UNPACKING
YOUR
REFRIGERATOR
Remove tape and any temporary labels from your
refrigerator before using. Do not remove any warning-type
labels or the model and serial number label.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also be
easily removed by rubbing a small amount of liquid dish
soap over the adhesive with your fingers. Wipe with warm
water and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see the Important Safety Instructions
section.
(5.08 cm)
2"
2"
(5.08 cm)
(5.08 cm)
Refrigerator shelves are installed in the shipping position.
Please reinstall shelves according to your individual
storage needs.
!
ff "3
3
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the
refrigerator for cleaning or service, be sure to protect
the floor. Always pull the refrigerator straight out when
moving it. Do not wiggle or walk the refrigerator when
trying to move it, as floor damage could occur.
• Be careful when you work with hinge, base grille,
stopper etc. You may be injured.
• Do not put hands or metal sticks into air vents, base
grille or bottom of refrigerator. You may be injured or
receive an electrical shock.
BASE GRILLE
INSTALLATION
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion or fire.
To install or replace Base Grille:
INSTALLATION
1. Open Refrigerator door.
1. Avoid placing unit near heat sources, direct sunlight
or moisture.
2. Remove the 2 screws from the bottom front part of
Refrigerator.
2. To minimize noise and vibration, the refrigerator MUST
be installed on a solidly constructed floor.
3. Place Base Grille into position and insert and
tighten screws.
3. Carpeting and soft tile surfaces are not recommended.
4. NEVER install the refrigerator on a platform or a weakly
supported structure.
5. Install this appliance in an area where the temperature
is between 55 °F (13 °C) and 110 °F (43 °C.) If the
temperature around the appliance is too low or high,
cooling ability may be adversely affected.
To remove the Base Grille
1. Open refrigerator door.
2. Remove screws from Base Grille and remove.
3. Reattach screws to the base of refrigerator.
ELECTRICAL
SHOCKHAZARD
Beforeyoubegin,eitherunplugtherefrigerator
or turnoffpoweratthecircuitbreakerorfusebox.Remove
food
andanyAdjustable
Dooror UtilityBinsfromdoors.Failuretodosocouldresultindeathor seriousinjury.
If entranceis lessthan35-inches
wide,
therefrigerator's
doorswillneedto beremoved.
TOOLSNEEDED:
• 10mmor 13/32-inch
socketwrench
(with2-inchextension
forbottomdoorhinge)
• No.2 Phillipsheadscrewdriver
• Flat-headscrewdriver
forprying
REMOVE
FREEZER
REMOVE
REFRIGERATOR
DOOR
• Loosen and remove the 2 bolts and the phillips head
screw to remove the Middle Hinge Bracket from
refrigerator housing (Fig. 4 and 5). Set parts aside.
DOOR
• Gently pry off the Top Hinge Cover with a flat head
screwdriver and remove (see Fig 1).
Fig. 1
Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge (see Fig. 2).
Set parts aside.
Fig. 2
Lift freezer door slightly and remove it.
(Fig. 3). Set aside.
Fig. 3
• Lift up door slightly and remove it.
Fig. 6
To replace doors, begin with refrigerator door and then
follow with freezer door.
REPLACE
REFRIGERATOR
DOOR
• Set door onto Bottom Hinge Pin.
Place Upper Hinge's Pin in the top of freezer door
and line up the Upper Hinge with holes in top of
refrigerator. Use the 3 bolts to replace Hinge (Fig. 10).
• Place Hinge Pin of Middle Hinge Bracket inside
Hinge Pin Insert on top of door (Fig. 7). Hold door
in place and line up the Middle Hinge Bracket with
the holes in refrigerator housing.
Fig. 10
• Carefully force-fit Top Hinge Cover back into place
over Hinge (Fig.11 ).
I Fig. 11
Use the 2 bolts and phillips screw to refasten
the Middle Hinge Bracket and door to the
refrigerator housing. (Fig. 8).
REPLACE
FREEZER
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or turn
off power at the circuit breaker or fuse box. Remove
food and any Adjustable Door or Utility Bins from doors
Failure to do so could result in death or serious injury.
DOOR
• Set the freezer door onto the Middle Hinge Pin
(Fig. 9).
Fig. 9
You may find it more convenient to have the doors
converted from the left-opening type (factory installed)
to the right-opening type. Directions refer to the right
side as the side on your right as you face the unit.
TOOLS NEEDED
• 10mm or 13/32-inch socket wrench
(with 2-inch extension for bottom door hinge)
• No. 2 Phillips head screwdriver
• 1Ainch socket wrench
• Flat-head screwdriver for prying
10
REVERSE
FREEZER
DOOR
• Move the Hinge Pin insert Bracket to the other side
of the door, keeping the same orientation, and move
the Hinge Pin insert into the hole on the left side
of the bracket (Fig. 17).
° Gently pry off the Top Hinge Cover with a flat head
screwdriver and remove (see Fig.13).
Fig. 13
Fig. 17
i_
Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the Top Hinge (see Fig. 14).
Set parts aside.
Hinge Pin
tnsert
Hinge
Pin
insert Bracket
Reverse Door Closer/Stop by flipping over
(see Fig. 18), place on top of Hinge Pin insert
Bracket, and tighten both down with the screw.
Fig. 14
Top Hinge
Fig. 18
(_
Lift up door slightly and remove it (Fig. 15).
• Pry off cover on top of refrigerator on left side to
uncover screw holes (Fig. 19).
Fig. 15
• Set freezer door and Top Hinge parts to the side
and remove refrigerator door.
Middle Hinge Bracket _
Fi-
1_'
Y" _
_
--
i
&
Hinge Pin
Turn freezer door upside down on a non-scratch
surface and loosen the screw to remove Door
Closer/Stop and Hinge Pin insert (see Fig. 16).
Fig. 16
Door Closer / Stop
11
Cover
(on top of
refrigerator)
REVERSEAND REATTACHREFRIGERATOR
DOOR
° REMOVE base grill.
See BASE GRILL INSTRUCTIONS on page 8.
• Remove the washer from the Bottom Hinge
Pin (Fig. 22).
o Using a 1A-inch socket wrench, loosen and remove
• Using a 1A-inch socket wrench, loosen and remove
Hinge Pin from the Middle Hinge Pin Bracket.
Remove washer underneath the middle hinge and
set aside
NOTE: At this point the door will be loose, lift up
door slightly and remove it. (Fig. 20 and 20a).
the Hinge Pin from the Bottom Hinge. Reattach
the Hinge Pin to the opposite side of the Hinge
(see Fig. 22 and 22a). NOTE: This is easier to do
while the Hinge is still attached.
Fig. 22
Fig. 20a
22a
Loosen and remove the 2 bolts and the
phillips head screw to remove the Middle
Hinge Bracket from refrigerator housing
(Fig. 21). Set parts aside.
Using 10mm or 13/32-inch socket wrench
with 2-inch extension, loosen the 3 bolts
and remove the Bottom Hinge from right
side of housing (Fig. 23).
12
• At thispoint,removetheDecorative
Boltonbottomon
refrigerator
housingfromtheleftsideof refrigerator
(Fig.24).Youwill needthisholefortheBottomHinge.
• Take out the Hinge Pin Insert and move
the Bracket to the other side of the door,
keeping the same orientation (Fig. 28).
• Place Hinge Pin Insert into the left side
of the bracket. Tighten Hinge Pin Bracket
to door (Fig. 28).
Fig. 24
Fig. 28
Hinge
Pin Bracket
• Move the Bottom Hinge to the left side of housing keeping
the same orientation, and reattach with 3 bolts (Fig. 25).
Now move Decorative Bolt to hole on lower right side
of housing.
• Take Door Closer/stop and flip (see Fig. 29).
Line up screw holes and mount on left side
of door bottom with the two screws. Turn
door upright. It is now ready for re-attaching.
Fig. 25
NOTE: The Refrigerator Door Closer/Stop
is not used on all models. The model you
have may not include this part.
Fig. 29
??
• Turn refrigerator door upside down on a non-scratching
surface.
• With door upside down, loosen the 2 screws and remove the
Door Closer/Stop (Fig. 26), then loosen the other two screws
to remove the bottom Hinge Pin Insert Bracket with Hinge
Pin Insert (see Fig. 27).
NOTE: The Refrigerator Door Closer/Stop is not used on all
models. The model you have may not include this part.
• With flat-head screwdriver, carefully pry
off and remove the cover over the screw
holes on the left side of refrigerator
housing (Fig. 30).
Fig. 26
Fig. 30
Fig. 27
Hinge
Pin Bracket
Hinge Pin
Insert
13
Remove
theouterlowerDecorative
Screwfromhousing
atareabetween
freezerandrefrigerator
doors(Fig.31).
YouwillneedthisholefortheMiddleHingeBracket).
PlaceUpperHinge'sPininthetopoffreezerdoor
andlineuptheUpperHingewithholesintopof
refrigerator. Use the 3 bolts to replace Hinge (Fig. 35).
Fig. 35
Fig.31¢}...._
_:_;
©
• Following illustration, flip the Middle Hinge Bracket (Flange
will now be on top) and position on left side of refrigerator
and re-attach with two bolts and a Phillips screw. (Fig. 32).
• Tighten bolts. Force-fit Top Hinge Cover
over Top Hinge (Fig. 36).
• Place refrigerator door down over pin on bottom hinge.
(Fig. 32).
Fig. 36
• Place washer between refrigerator door and middle hinge
and re-attach Hinge Pin to Hinge Bracket with 1/4-in.
socket wrench. NOTE: Bracket has been flipped, but Hinge
Pin stays in the same orientation with its hexagonal end
facing upward (Fig. 32).
Fig. 32
• Replace cover from left side of refrigerator
top onto the right of top to cover the holes.
Cover is also force-fitted (Fig. 37).
Cover (on top of
_----_----A_
Bracket
Place Decorative Screw into outer hole on right side
of housing (Fig. 33).
Attach cover on the right side. Cover is force-fitted (Fig. 33).
-_
..... /J
/
I
After changing doors, make sure that the corners
of the Door Gaskets are not folded over (see Fig. 38).
To ensure a good seal, apply a small amount of silicon
grease on the corners of gaskets.
I Decorative
€l S_rew
Corners
Fig. 38
\
REATTACHING
FREEZER
DOOR
• Put freezer door down over the Hinge Pin
on the Middle Hinge Pin Bracket (Fig. 34).
Fig. 34
14
/
LEVELING
DOOR ALIGNMENT
AND DOOR CLOSING
If the space between your doors is uneven, follow the
instructions below to align the doors:
To avoid vibration, the unit must be leveled, if necessary,
adjust the Leveling Legs to compensate for unevenness
of the floor. The front should be slightly higher than the
rear to aid in door closing.
Your refrigerator has two Front Leveling Screws - one on
the right and one on the left. if your refrigerator seems
unsteady or you want the doors to close more easily,
adjust the refrigerator's tilt using the instructions below:
1. Gently pry off the Top Hinge Cover with a flat head
screwdriver and remove. Loosen the Top Hinge Bolts
using a 10mm or 13/32-in. socket wrench or
open-end wrench.
2. Have someone hold the freezer door so the space
between the two doors is even, and retighten
the top hinge bolts.
1. Plug refrigerator power cord into a 3-prong grounded
outlet. Move the refrigerator into its final position.
2. Remove the base grill. See BASE GRILL
INSTRUCTIONS on page 8. The two Leveling Screws
are located on the bottom of the refrigerator on either
side (see Fig. 39).
3. Replace the Top Hinge Cover.
3. insert a flat screwdriver in slots to adjust the Leveling
Screws (Fig. 39). Turn the leveling screw clockwise
to raise that side of the refrigerator or counterclockwise
to lower it. it may take several turns of the Leveling
Screw to adjust the tilt of the refrigerator.
NOTE: Having someone push against the top of the
refrigerator takes some of the weight off the Leveling
Screws. This makes it easier to adjust the screws.
Fig. 39
4. Open both doors again and check to make sure
that they close easily. If not, tilt the refrigerator
slightly more to the rear by turning both Leveling
Screws clockwise. It may take several more turns,
and you should turn both Leveling Screws the
same amount.
5. Replace the base grill.
15
ENSURING
PROPER AiR CiRCULATiON
NEXT
In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, cool air enters through the bottom
of the freezer section and moves up. Most of the air then
flows through the freezer section vents and recirculates
under the freezer floor. The rest of the air enters the
refrigerator section through the top vent.
1. Clean your refrigerator thoroughly and wipe off all dust
accumulated during shipping.
2. Install accessories such as ice cube bin, drawers,
shelves, etc., in their proper places. They are packed
together to prevent possible damage during shipment.
3. Let your refrigerator run for at least 2 or 3 hours before
putting food in it. Check the flow of cold air in the
freezer compartment to ensure proper cooling. Your
refrigerator is now ready for use.
SETTING
THE CONTROLS
Your refrigerator has two controls to regulate temperature,
one in the freezer and one in the refrigerator.
REFRIGERATOR
CONTROL
Initially set the Refrigerator Control on the middle setting,
number 3. To do so, push the temperature adjust button
until the number 3 LED light is lit up. Leave the refrigerator
at this setting for 24 hours to reach correct temperature.
After 24 hours, adjust the compartment temperature as
desired. The higher the number, the colder the refrigerator
compartment will become. Always wait 24 hours before
adjusting temperature. If you go past the desired number,
keep pushing the temperature adjust button until your
desired number is lit up.
• Do not block any of these vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
®
COLDER
iMPORTANT."
Because air circulates between both sections, any odors
formed in one section will transfer to the other. You must
thorougly clean both sections to eliminate odors.
To prevent odor transfer and drying out food, wrap or
cover foods tightly. (See the Food Storage Guide section
for details.)
FREEZER
CONTROL
The freezer control should come from the factory set on the
middle setting, number 2. Wait 24 hours before adjusting
the temperature of the freezer compartment up or down.
Turn the dial to set freezer temperature as desired.
ALWAYS wait 24 hours after any adjustment for unit to
reach desired temperature.
Note: If you close the
refrigerator door forcefully,
the freezer door may open
and close again due to
pressure from internal air flow.
FREEZER
TEMPERATURE
O
Cold
RECOMMENDED
I_1
16
Colder
ADJUSTING
CONTROL
SETTINGS
FOOD STORAGE
Give the refrigerator time to cool down completely before
making final adjustments. It is best to wait 24 hours
before doing this. The recommended settings mentioned in
SETTING THE CONTROLS section should be correct for
normal household refrigerator use. The controls are set
correctly when milk or juice is as cold as you like and
when ice cream is firm.
Wrap or store food in the refrigerator in airtight and
moisture-proof material unless otherwise noted. This
prevents food odor and taste transfer throughout the
refrigerator. For dated products, check date code to
ensure freshness.
items
The refrigerator control functions as the thermostat for the
entire appliance (refrigerator and freezer sections). The
higher the number setting, the longer the compressor will
run to keep the temperature colder. The freezer control
adjusts the cold air flow from the freezer to the
refrigerator. Setting the freezer control to a lower
temperature keeps more cold air in the freezer
compartment to make it colder.
Cheese
Store in
you are
opened,
wrap or
Milk
Wipe milk cartons. For best
storage, place milk on interior
shelf, not on door shelf.
Eggs
Store in original carton or Egg Box
(on certain models) on interior shelf,
not on door shelf.
Use the settings listed in the chart below as a guide.
Always remember to wait at least 24 hours between
adjustments.
RECOMMENDED
ADJUSTMENT:
m REFRIGERATOR section too
warm
- Door opened often
- Large amount of food added
- Room temperature very warm
Turn REFRIGERATOR
control to next highest
number, wait 24 hours,
then re-check
m FREEZER section too
warm/ice not made fast enough
- Door opened often
- Large amount of food added
- Very cold room temperature
(Compressor doesn't cycle
often enough)
- Heavy ice usage
- Air vents blocked by items
Turn FREEZER control
to next highest number,
wait 24 hours, then
re-check
m REFRIGERATOR section too
cold
- Controls not set correctly for
your conditions
Set REFRIGERATOR
control to next lower
number, wait 24 hours,
then re-check
m FREEZER section too cold
- Controls not set correctly for
your conditions
Set FREEZER control to
next lower number, wait
24 hours, then re-check
How to
Keep opened butter in a covered
dish or closed compartment.
When storing an extra supply,
wrap in freezer packaging and
freeze.
If you need to adjust temperatures in the refrigerator or
freezer, start by adjusting the refrigerator. Then wait 24
hours before checking the freezer temperature. If it is too
warm or too cold, then adjust the freezer control.
CONDITION/
REASON:
GUIDE
Fruit
Leafy vegetables
the original wrapping until
ready to use. Once
rewrap tightly in plastic
aluminum foil.
Wash, let dry, and store in
refrigerator in plastic bags or in
the crisper. Do not wash or hull
berries until you are ready to use
them. Sort and keep berries in
their original container in a
crisper, or store in a loosely
closed paper bag on a refrigerator
shelf.
Remove store wrapping and trim
or tear off bruised and discolored
areas. Wash in cold water and
drain. Place in plastic bag or
plastic container and store in
crisper.
Move items out of
airstream
Vegetables with
skins (carrots,
peppers)
_ Place in plastic bags or plastic
container and store in crisper.
Fish
P,-Use fresh fish and shellfish the
same day purchased.
Leftovers
Cover leftovers with plastic wrap
or aluminum foil. Plastic
containers with tight lids can
also be used.
17
STORING
FROZEN
FOOD
Freezing
Your freezer will not quick-freeze any large quantity of
food. Do not put more unfrozen food into the freezer than
will freeze within 24 hours (no more than 2 to 3 Ibs of food
per cubic foot of freezer space). Leave enough space in
the freezer for air to circulate around packages. Be careful
to leave enough room at the front so the door can close
tightly.
NOTE: For further information about preparing food for
freezing or food storage times, check a freezer guide or a
reliable cookbook.
Packaging
Successful freezing depends on correct packaging.
Close and seal packages so no air or moisture can
pass in or out. If it does, you could have food odor
and taste transferred throughout the refrigerator
and freezer, and food in freezer package could
dry out.
Storage times will vary according to the quality and type
of food, the type of packaging or wrap used (airtight and
moisture-proof) and the storage temperature. Ice crystals
inside a sealed package are normal. This simply means
that moisture in the food and air inside the package has
condensed, creating ice crystals.
Packaging recommendations:
NOTE: Allow hot foods to cool at room temperature for
30 minutes, then package and freeze. Cooling hot foods
before freezing saves energy.
• Rigid plastic containers with tight-fitting lids
• Straight-sided
canning/freezing jars
• Heavy-duty aluminum foil
• Plastic-coated paper
• Non-permeable plastic wraps
• Specified freezer-grade self-sealing plastic bags
Follow package or container instructions for proper
freezing methods.
Do
not
use
• Bread wrappers
• Non-polyethylene
plastic containers
• Containers without tight lids
• Wax paper or wax-coated freezer wrap
• Thin, semi-permeable
wrap
Y_CAUTION: Do not keep beverage cans or plastic beverage
containers in the freezer compartment. They may break
if they freeze.
18
REFRIGERATOR
SHELVES
The shelves in your refrigerator are adjustable to meet
your individual storage needs. All the shelves in this unit
are glass.
NOTE: Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf falling or
spilling food.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will
make finding the exact item you want easier; it will also
reduce the amount of time the refrigerator door is open,
saving energy.
Slide
Out Shelves
(On Some Models)
You can slide some glass shelves in and out of your
refrigerator as follows.
• To slide the shelf out, carefully pull front of shelf
toward you.
iMPORTANT: Do not clean glass shelves with warm
water when they are cold. Shelves may break if exposed
to sudden temperature changes or impact, such as
bumping. For your protection, glass shelves are made
with tempered glass, which will shatter into small pebblesized pieces.
, To slide shelf in, push shelf in until it stops.
NOTE: Glass shelves are heavy. Use special care when
removing them to avoid dropping them.
Adjustable Shelves
Remove shelves from the shipping position and replace
shelves in the position you want.
• To remove a shelf=
and pull it out.
Tilt the front of the shelf upward
SNACK DRAWER
(On Some Models)
To remove the snack drawer:
Hold drawer by handle, pull forward to drawer stop,
lift up and pull out.
• To replace a shelf =_lt the front of the shelf up and
place the shelf hooks into metal slots at desired position.
Then lower the front of the shelf to secure the hooks
in the slots.
To replace snack drawer, slide back in fully past
the drawer stop.
19
CRISPER
AND CRISPER
To remove
the crisper:
COVER
CRISPER
HUMiDiTY
CONTROL
You can control the amount of humidity in the moisturesealed crispers. Adjust the control to any setting between
_Z_ and <_.
1. Pullcrisper drawer out to drawer stop.
2. Lift the drawer up and toward you to pull out
and remove.
•%:_ilets moist air out of the crisper for best storage of
fruits.
3. To replace crisper, slide back in fully past the
drawer stop.
•<_keeps moist air in the crisper for best storage of
fresh, leafy vegetables.
Humidity Control
\
To remove
crisper
To control the humidity in the crisper compartments,
move the slide above each crisper up (more moisture)
or down (less moisture)
glass:
1. Remove crisper drawers.
2. To remove glass above crispers, reach in under the
glass and lift up.
SNAP=ON
3. Pull glass up and out.
DOOR
RACKS
The door racks may be removed for easier cleaning.
Door racks are in both the refrigerator and the freezer.
The door racks are force-fitted with tabs and slots.
Snap-On
Door Racks
To remove door racks:
1. Remove all items from the door rack.
2. Push sides of rack together while lifting up.
Rack will lift out.
To remove
the crisper
cover:
1. Remove both crisper drawers.
2. While holding the center crisper cover support in
place, pull the cover up and out.
To replace the racks:
1. Hold door rack ends with both hands tilted slightly
downward and push together slightly while fitting
tabs on rack into slots in door. Force-fit into place.
2O
DOOR BiNS
ICE TRAY (On Some Models)
The door bins are removable for easy cleaning and
adjusting. They have slots in the sides which fit into
support slots placed at intervals on refrigerator door.
Icemaking
• Pour water to the level
indicated in the picture.
Do not overfill with water,
or ice cubes will be difficult
to remove.
1. To remove a bin, lift the bin up until it clears the
support slots and lift out.
2. To replace a bin, push into door and down onto a
set of support slots at the desired level.
, For quick freeze, adjust the
freezer dial to 3.
l
To remove ice cubes, twist the tray.
so may result in damage to the
tray.
• To
Do remove
not bondice
the
cubes
ice tray.
easily,
Doing __
pour water on the back of the
taosoa
tnwate
oe
removing ice cubes.
DAIRY BIN,
CAN RACK (On Some
Models)
The diary bin/can rack can be relocated to
another position.
1. To remove the dairy bin / can rack
simply lift up and pull out.
2. To replace the bin, slide it in above the
desired support slots and push down until it stops.
I
Dairy Bin
Can Rack
21
DOOR LINERS
AND GASKETS
Do not use cleaning waxes, concentrated detergents,
bleaches or cleaners containing petroleum on plastic
parts. Use a clean sponge or soft cloth and a mild
detergent in warm water. Wash, rinse and dry all
surfaces thoroughly.
ExplosionHazard
Usenon-flammable
cleaner.
PLASTIC
Failureto doso canresultin death,
Do not use paper towels, window sprays, abrasive
cleansers or flammable fluids. These can scratch or
explosion or fire.
BACK
CLEANING
and panels)
damage the material. Use a clean sponge or soft
cloth and a mild detergent in warm water. Wash, rinse
and dry all surfaces thoroughly.
Both the refrigerator and freezer sections defrost
automatically. However, clean both sections about once
a month to prevent odors. Wipe up spills immediately.
GENERAL
PARTS (covers
COVER
TIPS
• Unplug refrigerator or disconnect power.
• Remove all removable parts, such as shelves,
crispers, etc.
ELECTRICAL SHOCK HAZARD
Before you begin, either unplug the refrigerator or
turn off power at the circuit breaker or fuse box.
Failure to do so could result in death or serious
injury.
• To clean shelves, bins and other removable parts,
use a clean sponge or soft cloth and a mild detergent
in warm water. Do not use abrasive or harsh cleaners.
• Hand wash, rinse and dry all surfaces thoroughly.
, When finished cleaning, don't forget to plug in or
reconnect power.
NOTE: Back cover should
qualified technician.
OUTSIDE
Clean the vents on the back
cover. Use a vacuum cleaner
with the brush attachment,
at least twice a year to keep
your refrigerator working
efficiently.
Waxing external painted metal surfaces helps provide
rust protection. Do not wax plastic parts. Wax painted
metal surfaces at least twice a year using appliance wax
(or auto paste wax) Apply wax with a clean soft cloth.
only be removed
by a
Do Not use wax on stainless steel exteriors.
Use a product specially designed for polishing stainless
steel appliances, or clean with a soft cloth or clean
sponge and a mild detergent dissolved in warm water,
Dry thoroughly with a soft cloth,
LIGHT BULB
REPLACEMENT
NOTE: Avoid door surface contact with chemical
products that contain Phosphate or Chlorine.
INSIDE WALLS (allow
cloth won't stick)
freezer
Electrical
to warm up so
Shock Hazard
Before replacing a burned-out light bulb, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box.
To help remove odors, you can wash the inside of the
refrigerator and freezer with a mixture of baking soda
and warm water, Mix 2 tablespoons baking soda to
1 quart of water (26 g soda to 1 liter water,) Be sure the
baking soda completely dissolves so it does not scratch
the surfaces of the refrigerator,
NOTE: Not all appliance bulbs will fit your refrigerator.
Be sure to replace the bulb with one of 60 watts and
the same size and shape,
22
Tochange
the refrigerator
light:
1. Unplug the power cord from the outlet.
2. Remove refrigerator shelves.
3. Light shield is force fitted and has plastic tabs on
each side and a tab in the front. Release the tabs
on each side of light shield and push shield toward
rear of refrigerator and remove.
4. Turn the bulb counterclockwise and remove.
• DO NOTrefreezefrozenfoods whichhavethawedcompletely.
The UnitedStatesDepartmentof Agriculturein Homeand
GardenBulletinNo. 69 says:
.,.You maysafelyrefreezefrozenfoods that havethawedif they
still containicecrystalsor if they are still cold-below 4°0.
...Thawedgroundmeats,poultryor fish that haveanyoff-odor
or off-colorshouldnotbe refrozenand shouldnot be eaten.
Thawedice creamshouldbe discarded.If the odoror colorof
any foodis pooror questionable,disposeof it. The foodmay
be dangerousto eat.
Evenpartialthawingand refreezingreducesthe eatingquality
of foods,particularlyfruits, vegetablesand preparedfoods.The
eatingqualityof red meatsis affectedless thanthat of many
otherfoods. Userefrozenfoods as soonas possibleto save as
muchof theirqualityas you can.
5. Replace a burned-out light bulb with a new 40 watt bulb,
turning it clockwise.
6. To replace light shield, position front tab into slot and
carefully force-fit side tabs into slots.
7. Replace the refrigerator shelves.
8. Plug the power
cord into the oulet.
WHEN YOU GO ON VACATION
If you choose to leave the refrigerator on while you are away,
follow these steps to prepare your refrigerator before you leave.
1. Use up any perishables and freeze other items.
2. Empty the ice bin.
POWER
3. Turn off the Icemaker. NOTE: If the ambient temperature will
drop below freezing, have a qualified service technician drain
the water supply system (on some models) to prevent serious
property damage due to possible flooding from ruptured water
lines or connections.
iNTERRUPTiONS
1. If the power will be out for 24 hours or less, keep
all refrigerator doors closed to help foods stay
cold and frozen.
2. If the power will be out for more than 24 hours:
a) Remove all frozen food and store it in a frozen food locker.
OR
b) Place 2 Ibs. (ca 1kg) of dry ice in the freezer for every
cubic foot (28 L) of freezer space. This will keep the
food frozen for two to four days. While handling dry ice,
wear gloves to protect your hands from frostbite.
If you choose to turn the refrigerator off before you leave,
follow these steps.
1. Remove all food from the refrigerator and empty ice bin.
2. Unplug refrigerator.
3. Clean refrigerator, wipe, and dry well.
4. Tape rubber or wood blocks to the tops of both doors to prop
them open far enough for air to get in. This stops odor and
mold from building up.
WHEN YOU MOVE
Suffocation Hazard
When using dry ice, provide adequate ventilation.
Dry ice is frozen carbon dioxide (CO2). When it
vaporizes, it can displace oxygen, causing dizziness,
light-headedness, unconsciousness and death by
suffocation. Open a window and do not breathe
the vapors.
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all frozen food
in dry ice.
2, Unplug refrigerator.
3. Clean refrigerator, wipe, and dry well.
4. Empty water from the defrost pan.
OR
5. Clean, wipe and dry thoroughly.
c) If neither a food locker nor dry ice is available,
consume or dispose of food at once.
6. Take out all removable parts, wrap them well and tape them
together so they don't shift and rattle during the move. Refer to
sections in Using your Refrigerator for removal instructions.
REMEMBER: In a power failure, a full freezer stays
cold longer than a partially filled one. A freezer full of
meat stays cold longer than a freezer full of baked
goods. If you see that food contains ice crystals, it may
be safely refrozen, although the quality and flavor may
be affected. If the condition of the food is poor, or if you
feel it is unsafe, dispose of it.
7. Depending on the model, raise the front of the refrigerator so it
rolls more easily OR screw in the leveling legs all the way so they
don't scrape the floor. See the LEVELING AND DOOR
CLOSING section.
8. Tape the doors shut and tape the power cord to the
refrigerator cabinet.
When you get to your new home, put everything back and refer to
the REFRIGERATION INSTALLATION section for setup instructions.
23
When the bin fills to the level of the Automatic Shut
Off Arm, the icemaker will stop producing ice.
Personal injury Hazard
It is normal for several cubes to be stuck together.
Avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
the cubes. DO NOT place fingers or hands on the
automatic icemaking mechanism while the refrigerator
is plugged in.
If ice is not used frequently, old ice cubes will become
cloudy, taste stale, and shrink.
NOTE: If the cube size is smaller or larger than you
expected, you can regulate the size with the cube size
button.
The icemaker will begin to operate when it lowers to
freezing temperature.
Every time you press the cube size button, the indicator
moves up one light. The higher the light position, the larger
the cubes will be. Pressing at highest position returns
indicator to lowest position.
NOTE: Automatic Ice Maker feature is included only in
certain models. Other models are Ice Maker ready.
Please check your product specifications.
WHEN YOU SHOULD
OPERATION
SET THE ICEMAKER
POWER SWITCH TO O (OFF)
iNSTRUCTIONS
• When the water supply will be shut off for several hours.
A newly-installed
refrigerator
may take
12 to 24 hours to begin making ice.
When the ice storage bin is removed for more than a
minute or two.
When the refrigerator will not be used for several days.
Icemaker
NORMAL
SOUNDS
YOU MAY HEAR
The icemaker water valve will
with water. If the power switch
will buzz even if it has not yet
To stop the buzzing, move the
NOTE: Keeping the power switch in the I (on) position
before the water line is connected can damage the
icemaker.
Automatic
Shut Off Arm
Cube Size
Indicator Light
buzz as the icemaker fills
is in the I (on) position, it
been hooked up to water.
power switch to O (off).
Power Switch
Cube Size
Select Button
You will hear the sound of cubes dropping into the bin
and water running in the pipes as the icemaker refills.
The icemaker will produce eight cubes per cycle--approximately 100-130 cubes in a 24-hour period,
depending on freezer compartment temperature, room
temperature, number of door openings and other
operating conditions.
If the refrigerator is used before the water connection is
made to the icemaker, set the icemaker's power switch to
O (off).
When the refrigerator has been connected to the water
supply, set the power switch to I (on).
The icemaker will begin to operate when it lowers to
freezing temperature. A newly-installed refrigerator may
take 12 to 24 hours to begin making ice cubes.
Throw away the first few batches of ice to allow the water
line to clear.
Be sure nothing interferes with the sweep of the
Automatic Shut Off Arm.
24
NOTE:Waterlineinstallation
is neededwhenthe
AutomaticIcemakerand/orWaterDispenser
features
areavailableonyourproduct.
BEFORE
To determine how much tubing you need: measure
the distance from the water valve on the back of the
refrigerator to the water supply pipe. Then add 8 feet
(2.4 m). Be sure there is sufficient extra tubing (about 8 feet
[2.4 m] coiled into 3 turns of about 10 [25 cm] diameter) to
allow the refrigerator to move out from the wall after
installation.
YOU BEGIN
This water line installation is not warranted by the
refrigerator or icemaker manufacturer. Follow these
instructions carefully to minimize the risk of expensive
water damage.
Be sure that the kit you select allows at least 8 feet
(2.4 m) as described above.
A cold water supply.The water pressure must be
between 20 and 120 PSI or 0.137 and 0.82 MPa on
models without a water filter and between 40 and
120 PSI or 0.275 and 0.82 MPa on models with a
Water hammer (water banging in the pipes) in house
plumbing can cause damage to refrigerator parts and lead
to water leakage or flooding. Call a qualified plumber to
correct water hammer before installing the water supply
line to the refrigerator.
water filter.
To prevent burns and product damage, do not hook up
the water line to the hot water line.
• Power drill.
• 1/2" or adjustable
wrench.
If you use your refrigerator before connecting the water
line, make sure the icemaker power switch is in the O
(off) position.
Straight= and Phillips=
blade screwdriver
Do not install the icemaker tubing in areas where
temperatures fall below freezing.
Two 1/4" outer diameter
compression
nuts and
2 ferrules (sleeves) to
connect the copper tubing to
the shutoff valve and the
refrigerator water valve.
When using any electrical device (such as a power
drill) during installation, be sure the device is doubleinsulated or grounded in a manner to prevent the hazard
of electric shock, or is battery-powered.
All installations must be in accordance with local plumbing
code requirements.
If your existing copper water
_.
line has a flared fitting at the
end, you will need an
adapter (available at
plumbing supply stores) to
connect the water line to the refrigerator OR you can cut
off the flared fitting with a tube cutterand then use a
compression fitting.
NOTE: Wear eye protection.
• If a reverse osmosis water filtration system is
connected to your cold water supply, This water line
installation is not warranted by the refrigerator or
icemaker manufacturer. Follow next instructions carefully
to minimize the risk of expensive water damage.
• If a reverse osmosis water filtration system is
connected to your cold water supply, the water pressure
to the reverse osmosis system needs to be a minimum of
40 to 60 PSI or 0.27 MPa to 0.41MPa (2.8 kg.f/cm 2 - 4.2
kg.f/cm 2, less than 2 - 3 seconds to fill a cup of 7 oz
capacity [0.2 liters]).
If the water pressure from the reverse osmosis system is
less than 21 PSI or 0.14 MPa (1.5 kg.f/cm 2, more than 4
seconds to fill a cup of 7 oz capacity [0.2 liters]).
• Check to see whether the sediment filter in the reverse
osmosis system is blocked. Replace the filter if necessary.
• Allow the storage tank on the reverse osmosis system to
refill after heavy usage.
• If the issue about water pressure from reverse osmosis
remains, call a licensed, qualified plumber.
Shut off valve to connect to
the cold water line. The
shutoff valve should have a
water inlet with a minimum
inside diameter of 5/32" at
the point of connection to the
COLD WATER LINE. Saddle-type shutoff valves are
included in many water supply kits. Before purchasing,
make sure a saddle-type valve complies with your local
plumbing codes.
INSTALLATION
INSTRUCTIONS
Install the shutoff valve on the nearest frequently
drinking water line.
WHAT YOU WILL NEED
° Copper Tubing, 1/4" outer
diameter to connect the refrigerator
to the water supply. Be sure both
ends of the tubing are cut square.
used
1. SHUT OFF THE MAIN WATER SUPPLY
Turn on the nearest faucet to relieve the pressure on
the line.
25
INSTALLATION
INSTRUCTIONS
6. ROUTE THE TUBING
(CONTINUED)
2. CHOOSE THE VALVE LOCATION
Route the tubing between the cold water line and the
refrigerator.
Choose a location for the valve
Route the tubing through a hole drilled in the wall or
floor (behind the refrigerator or adjacent base cabinet)
as close to the wall as possible.
that is easily accessible. It is best
to connect into the side of a
vertical water pipe. When it is
necessary to connect into a
horizontal water pipe, make the
connection to the top or side,
rather than at the bottom, to avoid
drawing off any sediment from the water pipe.
NOTE: Be sure there is sufficient extra tubing (about
8 feet coiled into 3 turns of about 10 diameter) to
allow the refrigerator to move out from the wall after
installation.
7. CONNECT
3. DRILL THE HOLE FOR THE VALVE
TO THE VALVE
Place the compression nut and ferrule (sleeve)
for copper tubing onto the end of the tubing and
connect it to the shutoff valve. Make sure the tubing is
fully inserted into the valve. Tighten the compression
Drill a 1/4" hole in the water
pipe (even if using a selfpiercing valve) using a
sharp bit. Remove any burrs
resulting from drilling the
hole in the pipe. Take care
not to allow water to drain
Sad:::;_:urely
J
Compression
Nut
Shutoff Va__
into the drill. Failure to drill a 1/4 hole may result in
reduced ice production or smaller cubes.
4. FASTEN
THE TUBING
THE SHUT OFF VALVE
_11
Fasten the shutoff valve to the cold water pipe with
the pipe clamp.
Outlet
Valve
Pipe Clamp-
NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves
are illegal and use is not permitted in Massachusetts.
Consult with your licensed plumber.
Saddle-Type _
Shutoff Valve
_:
8. FLUSH OUT THE TUBING
Vertical Cold
Water Pipe
Turn the main water supply on
and flush out the tubing until the
water is clear.
NOTE: Commonwealth of Massachusetts Plumbing
Codes 248CMR shall be adhered to. Saddle valves
are illegal and use is not permitted in Massachusetts.
Consult with your licensed plumber.
5. TIGHTEN
Shut the water off at the water
valve after about one quart of
water has been flushed through
the tubing.
THE PIPE CLAMP
Tighten the clamp screws until the sealing washer
begins to swell.
NOTE: Do not overtighten or you may crush
the tubing.
/_lntet
Pipe Clamp
rule (sleeve)
_1_
L
End
Washer
Clamp Screwl_
26
9. CONNECT THE TUBING
REFRIGERATOR
TO THE
10. TURN THE WATER ON AT THE
SHUTOFF VALVE
NOTES:
• Before making the connection to the refrigerator, be
sure the refrigerator power cord is not plugged into
the wall outlet.
Tighten any connections that leak.
Reattach the compressor compartment access cover.
• If your refrigerator does not have a water filter,
we recommend installing one if your water supply
has sand or particles that could clog the screen of
the refrigerator's water valve. Install the filter in the
water line near the refrigerator.
IMPORTANT: Do not use old, worn or used waterlines,
only use new for a better use and service.
Connect only to the supply of drinking water for your
safety and health.
©
1. Remove the plastic flexible
cap from the water valve.
11. PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the
wall. Push the refrigerator back to the wall.
2. Place the compression nut
and ferrule (sleeve) onto
the end of the tubing as shown.
3. Insert the end of the copper tubing into the
connection as far as possible. While holding the
tubing, tighten the fitting.
%
H
v_. CAUTION: Check to see if leaks occur at water line
connections.
1/4 "Tubing
TubingClam_"_,
1/4'mpression_
_,_
_L[
_A_-._
l
i
12. START THE ICEMAKER
Set the icemaker power switch to the ON position.
The icemaker will not begin to operate until it reaches
its operating temperature of 15 °F (-9 °C) or below. It
will then begin operation automatically if the
icemaker power switch is in the I (on) position.
Ferrule
(sleeve)
_-_
Connection
efrigerator
_1_ CAUTION: Check to see if water dripping occurs at
water line connections.
27
UNDERSTANDING
SOUNDS
YOU MAY HEAR
The defrost timer will click when the automatic defrost
cycle begins and ends. The thermostat control (or
refrigerator control, depending on the model) will also
click when cycling on and off.
Your new refrigerator may make sounds that your old one
didn't make. Because the sounds are new to you, you
might be concerned about them. Most of the new sounds
are normal. Hard surfaces, like the floor, walls and
cabinets, can make the sounds seem louder than they
actually are. The following describes the kinds of sounds
and what may be making them.
Rattling noises may come from the flow of refrigerant, the
water line or items stored on top of the refrigerator.
Your refrigerator is designed to run more efficiently to
keep your food items at the desired temperature. The
high efficiency compressor may cause your new
refrigerator to run longer than your old one, but it will
take less energy to run. You may hear a pulsating or
high-pitched sound.
You may hear the evaporator fan motor circulating the air
through the refrigerator and freezer compartments.
As each cycle ends, you may hear a gurgling sound due
to the refrigerant flowing in your refrigerator.
Contraction and expansion of the inside walls may cause
a popping noise.
Water dripping on the defrost heater during a defrost
cycle may cause a sizzling sound.
You may hear air being forced over the condenser by the
condenser fan.
You may hear water running into the drain pan during the
defrost cycle.
REFRIGERATOR
DOES NOT OPERATE
Check if...
Then...
The power supply cord is unplugged.
Firmly plug the cord into a live outlet with proper voltage.
A household fuse has blown or circuit
breaker tripped.
Replace the fuse or reset the circuit breaker.
The control panel lights are blinking
sequentially (1-2-3-4-5):
The refrigerator control has been put into the store Demo
(Demonstration) Mode.
To exit the Demo Mode:
1. Open both the refrigerator and freezer doors.
2. Push in both door switches and at the same time
press and hold the Temperature Adjust button
for 5 seconds.
Door switches
Temp. Adjust Button
Refrigerator is in the defrost cycle.
VIBRATION
OR RATTLING
Wait about 30 minutes for defrost cycle to end.
NOISE
Check if...
Then.,,
I the
The floor.
refrigerator is not resting solidly on
Floor is weak or uneven or leveling legs need adjusting.
See LEVELING AND DOOR CLOSING section.
28
I
LIGHTS
DO NOT WORK
Check if...
Then...
The power supply cord is unplugged.
Firmly plug the cord into a live outlet with proper voltage.
Light bulb is loose in the socket.
Either unplug the refrigerator or turn off power at the circuit
breaker or fuse box. Gently remove the bulb and reinsert.
Then plug in refrigerator and reset the refrigerator control.
Light bulb has burned out.
Either unplug the refrigerator or turn off power at the
circuit breaker or fuse box. Replace the old bulb with a new
60 watts appliance bulb with the same size and shape
available at your local hardware store.
(See the LIGHT BULB REPLACEMENT section.)
COMPRESSOR
MOTOR SEEMS TO RUN TOO MUCH
Check if...
Then...
The refrigerator that was replaced was an older model.
Modern refrigerators with more storage space require
more operating time.
The room temperature is hotter than normal.
The motor will run longer under warm conditions. At normal room
temperatures, expect your motor to run about 40% to 80% of the
time. Under warmer conditions, expect it to run even more often.
The door is opened often or a large amount
of food has just been added.
Adding food and opening the door warms the refrigerator.
It is normal for the refrigerator to run longer in order to cool
the refrigerator back down. Adding a large amount of food
warms the refrigerator. See the FOOD STORAGE GUIDE
section. In order to conserve energy, try to get everything
you need out of the refrigerator at once; also keep food
organized so it is easy to find and close the door as soon
as the food is removed.
The refrigerator was recently plugged in and
the refrigerator control was set correctly,
The refrigerator will take up to 24 hours to cool
completely,
The refrigerator control is not set correctly for the
surrounding conditions.
See the ADJUSTING CONTROL SETTINGS section
The doors are not closed completely.
Push the doors firmly shut. If they will not shut all the way, see
"Doors will not close completely" below.
The condenser coils are dirty.
This prevents air transfer and makes the motor work harder.
Clean the condenser coils. Refer to the CARE AND CLEANING
section.
DOORS WILL
Check if...
NOT
CLOSE
COMPLETELY
Then...
The refrigerator is not level.
See the REFRIGERATOR INSTALLATION, LEVELING AND
DOOR ALIGNMENT section to level refrigerator.
Food packages are blocking the door open.
Rearrange food containers to clear door and door shelves.
The ice bin, crisper cover, pans, shelves, door bins
or baskets are out of position,
Push bins all the way in and put crisper cover, pans, shelves
and baskets into their correct positions. See the USING YOUR
REFRIGERATOR section
The gaskets are sticking.
Clean gaskets and the surface that they touch. Rub a thin
coat of paraffin wax on the gaskets after cleaning.
The refrigerator wobbles or seems unstable.
Level the refrigerator. Refer to the LEVELING AND DOOR
CLOSING section
The doors were removed during product installation
and not properly replaced.
Remove and replace the doors according to the REMOVING
AND REPLACING DOORS or REVERSING DOORS sectioo
or call a Sears or other qualified service technician.
29
FROST
OR
iCE CRYSTALS
ON FROZEN
FOOD
Check if...
Then...
The door is not closing properly.
See "Doors will not close completely" above.
The door is opened often.
When the door is opened, warm, humid air is allowed in
the freezer resulting in frost.
iCE HAS OFF-TASTE
OR ODOR
Check if...
Then...
The icemaker was recently installed.
Discard first few batches of ice to avoid discolored or
off-flavored ice.
The ice has been stored for too long.
Throw away old ice and make new supply.
The food has not been wrapped tightly in
either compartment,
Rewrap foods since odors may migrate to the ice if food
is not wrapped properly.
The water supply contains minerals such as sulfur.
A filter may need to be installed to eliminate taste and
odor problems.
The interior of refrigerator needs cleaning.
See CARE AND CLEANING section.
ice storage bin needs cleaning.
Empty and wash bin. Discard old cubes.
THERE
IS WATER IN THE DEFROST
DRAIN
Check if...
PAN
Then...
The refrigerator is defrosting.
The water will evaporate. It is normal for water to drip into the
defrost pan.
It is more humid than normal.
Expect that the water in the defrost pan will take longer to
evaporate. This is normal when it is hot or humid.
THE REFRIGERATOR
SEEMS TO MAKE TOO MUCH
NOISE
Check if...
Then...
I The sounds may be normal for your refrigerator.
Refer to the UNDERSTANDING
section
THE lCEMAKER
iS NOT PRODUCING
ICE OR iCE CUBES
Check if...
SOUNDS YOU MAY HEAR
ARE FREEZING
TOO SLOWLY
Then...
The freezer temperature
is cold enough to produce ice. 1 Wait 24 hours after hook-up for ice production. See the
SETTING THE CONTROLS section.
J
Door left open.
CUBES
PRODUCED
I Check to see if something is holding door open.
BY ICEMAKER
ARE TOO SMALL
Check if...
Then...
Smaller cube size level is selected.
Select larger cube size using cube size selector.
Water shutoff valve connecting refrigerator to water
line may be clogged.
Call a plumber to clear the valve.
30
/
1
THE DOORS
ARE DiFFiCULT
TO OPEN
Check if...
Then...
The gaskets are dirty or sticky.
Clean gaskets and the surfaces that they touch. Rub a thin
coat of paraffin wax on the gaskets following cleaning.
The door is reopened within a short time after having
been opened.
When you open the door, warmer air enters the refrigerator.
As the warm air cools, it can create a vacuum. If the door is
hard to open, wait 5 minutes to allow the air pressure to
equalize, then see if it opens more easily.
AUTOMATIC
ICEMAKER
DOES NOT WORK
Check if...
(Icemaker
On Some Models)
Then...
Icemaker power switch in the O (off) position.
Move the switch to the I (on) position.
Water supply turned off or not connected.
See the CONNECTING
Freezer compartment too warm.
Wait 24 hours for the freezer to reach its ideal temperature.
Piled up cubes in the storage bin cause the icemaker
to shut off.
Level cubes by hand.
TEMPERATURE
iS TOO WARM
OR THERE
Check if...
IS iNTERIOR
THE WATER LiNE section.
MOISTURE
BUILDUP
Then...
The air vents are blocked. Cold air circulates
from the freezer to the fresh food section and
back again through air vents in the wall dividing
the two sections.
Locate air vents by using your hand to sense airflow and
move all packages that block vents and restrict airflow. Refer
To ENSURING PROPER AiR CiRCULATiON
for the location of air vents.
The doors are opened often.
When the door is opened, warm humid air is allowed into
the refrigerator. The more the door is opened, the faster the
humidity builds up, and the more warm air the refrigerator
must cool. In order to keep the refrigerator cool, try to get
everything you need out of the refrigerator at once; also,
keep food organized so it is easy to find and close the door
as soon as the food is removed.
The control is not set correctly for the surrounding
conditions.
Refer to the SETTING THE CONTROLS section.
A large amount of food has just been added
to the refrigerator or freezer.
Adding food warms the refrigerator. It can take a few hours
for the refrigerator to return to normal temperature.
The food is not packaged correctly.
Wrap food tightly and wipe off damp containers prior to
storing in the refrigerator to avoid moisture accumulation. If
necessary, repackage food according to the guidelines in the
FOOD STORAGE GUIDE section.
The doors are not closing completely.
See "Doors will not close completely".
The weather is humid.
in humid weather, air carries moisture into refrigerator
when doors are opened.
A self-defrost cycle was completed.
It is normal for droplets to form on the back wall after the
refrigerator self-defrosts.
Wait 24 hours for temperatures to stabilize or even out. If the
temperature is too cold or too warm, move the dial one
number at a time.
31
Your Home
For expert troubleshooting and home solutions advice:
iiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii_i
>
iiiiiiiiiiiiiiiiiiiiiiii
_'_
iiiiiiiiiiiiiiiiiiiiiiii
www.managemyhome.com
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii
For repair - in your home - of all major brand appliances,
iiiiiiiiiiiiiiiiiiiiiiii
lawn and garden equipment, or heating and cooling systems,
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiino matter who made it, no matter who sold it !
iiiiiiiiiiiiiiiiiiiiiiii For the replacement parts, accessories and
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii owner's manuals that you need to do-it-yourself.
iiiiiiiiiiiiiiiiiiiiiiii
For Sears professional installation of home appliances
iiiiiiiiiiiiiiiiiiiiiiii
and items like garage door openers and water heaters.
iiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiii 1-800-4-MY-HOME ® Call anytime, day or night
iiiiiiiiiiiiiiiiiiiiiiii
(1-800-469-4663)
(U.S.A. and Canada)
iiiiiiiiiiiiiiiiiiiiiiii
www.sears.com
www.sears.ca
iiiiiiiiiiiiiiiiiiiiiiii
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call anytime for the location of the nearest
Sears Parts & Repair Service Center
1-800-488-1222
(U.S.A.)
www.sears.com
1-800-469-4663
(Canada)
www.sears.ca
To purchase a protection agreement on a product serviced by Sears:
1-800-827-6655
(u.sA.)
Para pedir servicio de reparaciSn
a domicilio, y para ordenar piezas:
1-800-361-6665
(Canada)
Au Canada pour service en franc..ais:
1-800-LE-FOYER Mc
© Sears Brands, LLC
® Registered Trademark / TMTrademark / SMService Mark of Sears Brands, LLC
® Marca Registrada / TMMarca de Fabrica / SMMarca de Servicio de Sears Brands, LLC
MCMarque de commerce / MD Marque depos6e de Sears Brands, LLC