Pentax Digital Camera 15441 Operating Manual

Digital Camera
Operating Manual
To ensure the best performance from your camera, please read
the Operating Manual before using the camera.
Thank you for purchasing this PENTAX Digital Camera.
Please read this manual before using the camera in order to get the most out of
all the features and functions. Keep this manual safe, as it can be a valuable tool
in helping you to understand all the camera’s capabilities.
This operating manual applies to Optio WG-2 GPS and Optio WG-2.
The illustrations used in this manual are those of Optio WG-2 GPS.
Regarding copyrights
Images taken using the PENTAX Digital Camera that are for anything other than
personal enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are cases where limitations
are placed on taking pictures even for personal enjoyment during demonstrations,
performances or of items on display. Images taken with the purpose of obtaining
copyrights also cannot be used outside the scope of use of the copyright as laid out in
the Copyright Act, and care should be taken here also.
Regarding trademarks
• SDXC logo is a trademark of SD-3C, LLC.
• Microsoft and Windows are registered trademarks of Microsoft Corporation in
the United States and other countries. Windows Vista is either a registered
trademark or trademark of Microsoft Corporation in the United States and/or
other countries.
• Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
• ArcSoft®, and its logo are either the registered trademark or trademark of
ArcSoft Inc. in the United States and/or other countries.
• HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing, LLC in the United States and/or
other countries.
• Eye-Fi, the Eye-Fi logo and Eye-Fi connected are trademarks of Eye-Fi, Inc.
• This product supports PRINT Image Matching III. PRINT Image Matching
enabled digital still cameras, printers and software help photographers to
produce images more faithful to their intentions. Some functions are not
available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• This product is licensed under the AVC Patent Portfolio License for the personal
use of a consumer or other uses in which it does not receive remuneration to (i)
encode video in compliance with the AVC standard (“AVC video”) and/or (ii)
decode AVC video that was encoded by a consumer engaged in a personal
activity and/or was obtained from a video provider licensed to provide AVC
video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
• All other brands or product names are trademarks or registered trademarks of
their respective companies.
• In this manual, the TM and ® marks are not specified.
Regarding Product Registration
In order to better serve you, we request that you complete the product registration,
which can be found on the CD-ROM supplied with the camera or on the PENTAX
website. Thank you for your cooperation.
Refer to “Product Registration on the Internet” (p.201) for more information.
To users of this camera
• Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields.
Strong static charges or the magnetic fields produced by equipment such as radio
transmitters could interfere with the monitor, damage the stored data, or affect the
product’s internal circuitry and cause camera misoperation.
• The liquid crystal panel used in the display is manufactured using extremely high
precision technology. Although the level of functioning pixels is 99.99% or better, you
should be aware that 0.01% or fewer of the pixels may not illuminate or may
illuminate when they should not. However, this has no effect on the recorded image.
• A band of light may appear on the display if the camera is aimed at a bright subject.
This is known as a smear, but it is not a malfunction.
• There is a possibility that the illustrations and the display screen in this manual are
different from the actual product.
• In this manual, SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards
are referred to as SD Memory Cards.
• In this manual, the generic term “computer(s)” refers to either a Windows PC or a
Macintosh hereafter.
• In this manual, the term “battery(ies)” refers to any type of batteries used for this
camera and accessories.
Using Your Camera Safely
We have paid close attention to the safety of this product. When using
this product, we request your special attention regarding items marked
with the following symbols.
Warning This symbol indicates that violating this item could
cause serious personal injuries.
Caution
This symbol indicates that violating this item could
cause minor or medium personal injuries, or loss of
property.
1
About the Camera
Warning
• Do not attempt to take the camera apart or modify the camera. High voltages
are present within the camera, and there is a danger of electric shock if the
camera is taken apart.
• If the inside of the camera should become exposed as a result of, for example,
the camera being dropped, please do not under any circumstances touch such
exposed portions, as there is a danger of receiving an electric shock.
• Wrapping the strap of the camera around your neck is also dangerous. Please
take care that small children do not hang the strap around their necks.
• If any irregularities occur during use, such as smoke or a strange odor, stop use
immediately, remove the battery or the AC adapter, and contact your nearest
PENTAX Service Center. Continuing to use the product can cause a fire or
electric shock.
Caution
• Do not place your finger on the flash when it is discharging as there is a risk of
burns.
• Do not discharge the flash while it is touching your clothing as there is a risk of
discoloring.
• Some portions of the camera heat up during use, so please take care, as there
is a risk of low temperature burns if such portions are held for long periods of
time.
• Should the LCD be damaged, be careful of glass fragments. Also, be careful
not to allow the liquid crystal to get on your skin, in your eyes, or in your mouth.
• Depending on your individual factors or physical condition, the use of the
camera may cause itching, rashes or blisters. In case of any abnormality, stop
using the camera and get medical attention immediately.
2
About the Battery Charger and the AC Adapter
Warning
• Always use the battery charger and AC adapter exclusively developed for this
product, with the specified power and voltage. Using a battery charger or AC
adapter not exclusive to this product, or using the exclusive battery charger or
AC adapter with an unspecified power or voltage can cause a fire, electric
shock, or camera breakdown. The specified voltage is 100-240V AC.
• Do not disassemble or modify the product. This can cause a fire or electric
shock.
• If the generation of smoke or strange odor from the product or other abnormality
occurs, immediately discontinue its use and consult a PENTAX Service Center.
Continuing to use the product can cause a fire or electric shock.
• If water should happen to get inside the product, consult a PENTAX Service
Center. Continuing to use the product can cause a fire or electric shock.
• If a thunder storm should occur while using the battery charger or AC adapter,
unplug the AC plug cord and discontinue use. Continuing to use the product can
cause damage to the equipment, fire, or electric shock.
• Wipe off the plug of the AC plug cord if it becomes covered with dust. Dust on
the plug may cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to drop
onto it or allow the AC plug cord to become damaged due to excessive bending.
If the AC plug cord becomes damaged, consult a PENTAX Service Center.
• Do not short or touch the output terminals of the product while it is still plugged
in.
• Do not plug in the AC plug cord with wet hands. This can cause an electric
shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
• Do not use the battery charger to charge a battery other than a rechargeable
lithium-ion battery D-LI92. This can cause overheating, explosion, or battery
charger failure.
• To reduce the risk of hazards, use only a CSA/UL certified power supply cord set,
cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end with a
molded-on male attachment plug cap (with a specified NEMA configuration), and
the other is provided with a molded-on female connector body (with a specified IEC
nonindustrial type configuration) or the equivalent.
3
About the Battery
Warning
• Be sure to store the battery out of the reach of small children. Placing it in their
mouths may cause an electric shock.
• If any leakage from the battery should come in contact with your eyes, it may
cause a loss of sight. Flush your eyes with clean water and get medical
attention immediately. Do not rub them.
Caution
• Only use the specified battery with this camera. Use of other batteries may
cause an explosion or fire.
• Do not disassemble the battery. Disassembling the battery may cause an
explosion or leakage.
• Remove the battery from the camera immediately if it becomes hot or begins to
smoke. Be careful not to burn yourself during removal.
• Keep wires, hairpins, and other metal objects away from the + and - contacts of
the battery.
• Do not short the battery or dispose of the battery in fire. This can cause an
explosion or fire.
• If any leakage from the battery should come in contact with skin or clothes, it may
cause irritation to the skin. Wash the affected areas thoroughly with water.
• Precautions for D-LI92 Battery Usage:
BATTERY MAY EXPLODE OR FIRE IF MISTREATED.
- DO NOT DISASSEMBLE OR DISPOSE OF IN FIRE.
- DO NOT CHARGE EXCEPT SPECIFIED CHARGING CONDITION.
- DO NOT HEAT ABOVE 140°F / 60°C, OR SHORT CIRCUIT.
- DO NOT CRUSH OR MODIFY.
Keep the Camera and Accessories Out of the Reach of Small
Children
Warning
• Be sure to keep the camera and its accessories out of the reach of small
children.
1. Injuries may result from the product falling or from unexpected movement.
2. Suffocation may result from wrapping the strap around the neck.
3. Small accessories such as battery or an SD Memory Card may be
swallowed. Seek medical attention immediately if an accessory is
accidentally swallowed.
4
Care to be Taken During Handling
Before Using Your Camera
• When traveling, take the Worldwide Service Network listing that is included in
the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at a
wedding or when traveling). Contents of the recording cannot be guaranteed if
recording, playback or transferring your data to a computer, etc. is not possible
due to a malfunction of your camera or recording media (SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
About the Battery and Battery Charger
• Storing the battery fully charged may decrease the battery performance. Avoid
storing it especially in high temperatures.
If the battery is left inserted and the camera is not used for a long time, the
battery will over-discharge and shorten the battery’s service life.
• Charging the battery a day before use or on the day of use is recommended.
• The AC plug cord supplied with the camera is for exclusive use with the battery
charger D-BC92. Do not use it with any other equipment.
Precautions on Carrying and Using Your Camera
• Hot and humid places should be avoided. Particular care should be taken
regarding vehicles, which can become very hot inside.
• Ensure that the camera is not subjected to substantial vibrations, shocks, or
pressure as this may cause damage, malfunction, or a loss in waterproof
performance. Place the camera on a cushion for protection when the camera is
subjected to the vibrations of a motorbike, car, ship, etc. If the camera is
subjected to substantial vibrations, shocks, or pressure, take your camera to
your nearest PENTAX Service Center and have it checked.
• The temperature range in which the camera can be used is -10°C to 40°C (14°F
to 104°F).
• The liquid crystal display will become black at high temperatures but will return
to normal at normal temperatures.
• The response speed of the liquid crystal display becomes slow at low
temperatures. This is due to the properties of the liquid crystal and is not a
malfunction.
5
• If the camera is subjected to rapid temperature changes, condensation may
form on the inside and outside of the camera. Therefore put the camera in a bag
or plastic bag and take the camera out when the difference in temperature has
subsided.
• Avoid contact with garbage, mud, sand, dust, water, toxic gases, or salts. These
could cause the camera to breakdown. Wipe the camera to dry off any rain or
water drops.
• Please do not press forcefully on the display. This could cause it to break or
malfunction.
• Be careful not to sit down with the camera in your back pocket as this may
damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten the screw in
the tripod socket on the camera.
Cleaning Your Camera
• Do not clean the product with organic solvents such as thinner, alcohol or
benzene.
• Use a lens brush to remove dust accumulated on the lens. Never use a spray
blower for cleaning as it may damage the lens.
Storing Your Camera
• Avoid storing the camera where pesticides and chemicals are handled.
Remove the camera from its case and store it in a well-ventilated place to
prevent the camera from becoming moldy during storage.
• Avoid using or storing the camera where it may be exposed to static electricity
or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations where it may
be exposed to rapid changes in temperature or to condensation.
Other Precautions
• Periodic inspections are recommended every one to two years to maintain high
performance.
• Please note that deleting data, or formatting the SD Memory Cards or the builtin memory does not completely erase the original data. Deleted files can
sometimes be recovered using commercially available software. It is user’s
responsibility to ensure the privacy of such data.
6
• The SD Memory Card is equipped with a
write-protect switch. Setting the switch to
LOCK prevents new data from being
recorded on the card, the stored data from
Write-protect
being deleted, and the card from being
switch
formatted by the camera or a computer.
r appears on the display when the card is
write-protected.
• Care should be taken when removing the SD Memory Card immediately after
using the camera, as the card may be hot.
• Keep the battery/card cover closed and do not remove the SD Memory Card or
turn the camera off while the data is being played back or saved to the card, or
the camera is connected to a computer with the USB cable, as this may cause
the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away
from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage the
card and render it unusable.
• The data on the SD Memory Card may be deleted in the following circumstances.
We do not accept any liability for data that is deleted.
(1) When the SD Memory Card is mishandled by the user.
(2) When the SD Memory Card is exposed to static electricity or electrical
interference.
(3) When the SD Memory Card has not been used for a long time.
(4) When the SD Memory Card is ejected or the battery is removed while the
data on the card is being recorded or accessed.
• If it is not used for a long time, the data on the card may become unreadable.
Be sure to regularly make a backup of important data on a computer.
• When using an SD Memory Card with a slow recording speed, recording may
stop while you are taking movies even when there is adequate space in the
memory, or shooting and playback may take a long time.
• Be sure to format SD Memory Cards that are unused or have been used on
another camera. Refer to “Formatting the Memory” (p.174).
7
Regarding Waterproof, Dustproof, and
Shockproof Design
• This camera is provided with a waterproof/dustproof design complying with JIS
waterproof grade 8 and JIS dustproof grade 6 (equivalent to IP68).
• The camera satisfies the PENTAX drop test (1.5 m height onto a 5 cm thick
plywood surface) complying with MIL-Standard 810F Method 516.5-Shock
testing.
• The camera satisfies the PENTAX test for the waterproof, dustproof, and
shockproof performance, but this does not guarantee it will remain free of
trouble or damages.
• Waterproof performance is not guaranteed if the camera is exposed to impact
such as being dropped or hit.
Precautions Before Using the Camera in the
Water
Check the Following Before Going Near the Water
• Make sure that there are no cracks or scratches on the rubber seal of the
battery/card and terminal covers.
Packing contact surface
Packing contact surface
Waterproof packing
Waterproof packing
• Make sure there are no foreign objects (dust, sand, hair, lint or liquid) on the
rubber seals or the surface they contact before closing the battery/card and
terminal covers. Wipe off any foreign objects with a clean lint-free cloth.
8
• Close the battery/card and terminal covers properly until they click. Otherwise
water may get in and damage the camera.
Be Careful Near the Water
• Avoid opening the battery/card and terminal covers when near the waterside or
with wet hands. Wait until the camera is completely dry before changing the
battery or the SD Memory Card. Avoid changing the battery or card where the
camera is likely to get wet or dirty, and make sure that your hands are dry.
• The camera will sink if dropped in water, so be sure to attach the strap and slip
the strap over your wrist when using the camera in or near water.
• To enhance the waterproof performance of the camera, the front of the lens is
protected by glass. As any dirt or water on the glass will affect the quality of
pictures taken, the glass should be kept clean at all times.
Precautions When Using the Camera in the Water
• Do not use the camera deeper than 12 meters underwater. Do not use the
camera underwater for more than 120 minutes consecutively.
• Do not open the battery/card and terminal covers underwater.
• Do not use in hot water or in a hot spring.
• Do not apply excessive force to the camera, for example diving into water with
it. Doing so may compromise the waterproof performance of the camera or
cause the covers to open.
• Leaving the camera on the sand at the beach may cause the camera to exceed
its operating temperature or cause the speaker or microphone to become
blocked with sand.
• Avoid subjecting the camera to substantial vibrations, shocks, or pressure as
this may cause a loss in waterproof performance. If the camera is subjected to
substantial vibrations, shocks or pressure, take your camera to your nearest
PENTAX Service Center and have it checked.
• Avoid getting sunscreen or sun oil on the camera as it may cause discoloration
of the surface. If any oil gets on the camera, wash it off immediately with warm
water.
• Sudden and extreme changes in temperature may cause condensation to form
in and on the camera. Keep the camera in a bag or case to reduce the
difference in temperature.
9
Precautions After Using the Camera in the Water
• Do not open the battery/card cover or terminal cover if the camera is wet. Wipe
off any water with a clean lint-free cloth.
• The inside surface of the covers may get wet when they are opened. Wipe off
any water that is on the cover.
• Wiping off the camera while there is sand or dust on it may scratch the surface
of the camera. Make sure that the battery/card cover and terminal cover are
firmly closed before washing the camera in tap water. After washing the
camera, dry it with a soft cloth.
• Wipe off any dirt or sand on the waterproof packing or the packing contact
surface. The camera’s waterproof performance may be compromised by loose
packing or cracks or dents in the packing or packing contact surface. If there is
any such damage, contact your nearest PENTAX Service Center.
• If the camera is very dirty or after it has been used in the sea, make sure that it
is turned off and the battery/card and terminal covers are firmly closed before
rinsing it under running tap water or leaving it in a bowl of clean water for a short
time (2 or 3 minutes).
• Avoid cleaning with agents such as soapy water, mild detergents, or alcohol as
this may compromise the waterproof performance of the camera.
• To maintain the waterproof performance of the camera, you are recommended
to change the waterproof packing once a year. Contact your nearest PENTAX
Service Center regarding changing the packing. (A charge will be made.)
• The camera’s accessories are not waterproof.
10
Contents
Using Your Camera Safely ...................................................................... 1
Care to be Taken During Handling .......................................................... 5
Regarding Waterproof, Dustproof, and Shockproof Design.................... 8
Precautions Before Using the Camera in the Water................................ 8
Precautions When Using the Camera in the Water................................. 9
Precautions After Using the Camera in the Water................................. 10
Contents ................................................................................................ 11
Composition of the Operating Manual ................................................... 17
Camera Features ........................................................................................ 18
Checking the Contents of the Package ................................................. 22
Names of Parts...................................................................................... 23
Names of Operating Parts..................................................................... 24
Monitor Indications ................................................................................ 25
Getting Started
32
Attaching the Carabiner Strap .................................................................. 32
Powering the Camera ................................................................................ 33
Charging the Battery ............................................................................. 33
Installing the Battery.............................................................................. 34
Using the AC Adapter............................................................................ 37
Installing the SD Memory Card ................................................................. 39
Turning the Camera On and Off................................................................ 41
Starting-up in Playback Mode ............................................................... 42
Initial Settings............................................................................................. 43
Setting the Display Language ............................................................... 43
Setting the Date and Time..................................................................... 46
Common Operations
48
Understanding the Button Functions....................................................... 48
A Mode ................................................................................................ 48
Q Mode ............................................................................................... 50
Switching Between A Mode and Q Mode.......................................... 52
Setting the Camera Functions .................................................................. 53
Operating the Menus............................................................................. 53
Menu List............................................................................................... 55
11
Taking Pictures
60
Taking Still Pictures ................................................................................... 60
Taking Pictures...................................................................................... 60
Using the Zoom ..................................................................................... 63
Setting the Shooting Mode .................................................................... 65
Using the Face Detection Function ....................................................... 69
Taking Pictures in Basic Mode (Green Mode)....................................... 73
Taking Pictures of Your Pet (Pet Mode) ................................................ 74
Taking Pictures of Text (Text Mode) ..................................................... 77
Taking Pictures in Digital Microscope Mode.......................................... 77
Framing Your Pictures (Frame Composite Mode)................................. 78
Taking Pictures at a Set Interval (Interval Shot) .................................... 79
Using the Self-timer ............................................................................... 81
Taking a Series of Pictures (Continuous Shooting/Burst Shooting) ...... 82
Taking Pictures Using the Remote Control Unit (Optional) ................... 83
Taking Pictures with Automatic Exposure Adjustment
(Auto Bracketing) ............................................................................ 84
Using the Digital Wide Function (Digital Wide Mode)............................ 85
Taking Panoramic Pictures (Digital Panorama Mode)........................... 87
Setting the Shooting Functions ................................................................ 89
Setting the Rec. Mode Menu ................................................................. 89
Selecting the Flash Mode ...................................................................... 90
Selecting the Focus Mode ..................................................................... 91
Setting the Image Tone ......................................................................... 95
Selecting the Number of Recorded Pixels............................................. 96
Selecting the Quality Level of Still Pictures ........................................... 97
Adjusting the White Balance ................................................................. 98
Setting the AE Metering ........................................................................ 99
Setting the Sensitivity .......................................................................... 100
Setting AUTO ISO Range ................................................................... 101
Setting the Exposure (EV Compensation)........................................... 101
Correcting the Brightness (D-Range Setting) ...................................... 102
Setting Pixel Track SR ........................................................................ 103
Setting Blink Detection ........................................................................ 104
Setting the Instant Review................................................................... 104
Setting the Green Button ..................................................................... 105
Setting the Image Sharpness (Sharpness) ......................................... 108
Setting the Saturation/Tone Adjustment.............................................. 108
Setting the Image Contrast (Contrast)................................................. 109
Setting the Date Imprint Function ........................................................ 109
Setting the IQ Enhancer Processing ................................................... 110
Setting the Macro Light ....................................................................... 110
Taking Pictures Underwater.................................................................... 111
Taking Underwater Pictures (Underwater Mode/Underwater
Movie Mode) ................................................................................. 111
12
Recording Movies .................................................................................... 113
Recording Movies................................................................................ 113
Selecting the Number of Recorded Pixels and Frame Rate
for Movies ..................................................................................... 115
Setting the Movie SR (Movie Shake Reduction) Function................... 116
Recording a Movie from Pictures Taken at a Set Interval
(Interval Movie) ............................................................................. 116
Using the High Speed Movie Function ................................................ 119
Saving the Settings (Memory)................................................................. 120
Playing Back and Deleting Images
122
Playing Back Images ............................................................................... 122
Playing Back Still Pictures................................................................... 122
Playing Back a Movie .......................................................................... 123
Multi-Image Display ............................................................................. 124
Using the Playback Function ............................................................... 126
Slideshow ............................................................................................ 129
Rotating the Image .............................................................................. 131
Zoom Playback.................................................................................... 132
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback) ............................................................ 133
Deleting Images and Sound Files ........................................................... 135
Deleting a Single Image/Sound File .................................................... 135
Deleting Selected Images and Sound Files ........................................ 136
Deleting All Images and Sound Files .................................................. 137
Protecting Images and Sound Files from Deletion (Protect) ............... 138
Connecting the Camera to AV Equipment ............................................. 140
Connecting the Camera to a Video Input Terminal ............................. 140
Connecting the Camera to an HDMI Terminal .................................... 142
Editing and Printing
143
Editing Images.......................................................................................... 143
Changing the Image Size (Resize)...................................................... 143
Cropping Images ................................................................................. 144
Processing Images to Make Faces Look Smaller ............................... 145
Using the Digital Filters ....................................................................... 146
Using the HDR Filter ........................................................................... 148
Using the Ink Rubbing Filter ................................................................ 148
Creating a Collage Image.................................................................... 149
Red-eye Compensation....................................................................... 152
Adding a Frame (Frame Composite) ................................................... 153
Overlaying Your Original Frame on Still Pictures ................................ 156
Editing Movies ..................................................................................... 160
Copying Images and Sound Files ....................................................... 163
Printing Settings ...................................................................................... 165
Setting the Printing Service (DPOF).................................................... 165
13
Recording and Playing Back Sound
168
Recording Sound (Voice Recording Mode) ........................................... 168
Setting Voice Recording ...................................................................... 168
Recording Sounds............................................................................... 169
Playing Back Sound ............................................................................ 170
Adding a Voice Memo to Images ............................................................ 171
Recording a Voice Memo .................................................................... 171
Playing Back a Voice Memo................................................................ 172
Settings
173
Camera Settings ....................................................................................... 173
Setting the Setting Menu ..................................................................... 173
Formatting the Memory ....................................................................... 174
Changing the Sound Settings.............................................................. 175
Changing the Date and Time .............................................................. 176
Setting the Alarm ................................................................................. 178
Setting the World Time........................................................................ 180
Setting the Text Size on the Menu ...................................................... 182
Changing the Display Language ......................................................... 182
Changing the Naming System of the Folder........................................ 183
Changing the Naming System of the File ............................................ 185
Changing the Video Output Format..................................................... 187
Selecting the HDMI Output Format ..................................................... 188
Setting the Eye-Fi Communication ...................................................... 189
Adjusting the Brightness of the Display............................................... 189
Using the Power Saving Function ....................................................... 190
Setting Auto Power Off........................................................................ 190
Setting the Quick Zoom Function ........................................................ 191
Setting the Guide Display.................................................................... 191
Perform Pixel Mapping ........................................................................ 192
Changing the Start-up Screen............................................................. 193
Resetting to Default Settings (Reset) .................................................. 194
Setting the Startup Shortcut ................................................................ 194
Displaying the Clock Display ............................................................... 195
Light up the LED.................................................................................. 196
14
Connecting to a Computer
197
Setting Up Your Computer ...................................................................... 197
Provided Software ............................................................................... 197
System Requirements ......................................................................... 198
Installing the Software ......................................................................... 199
Setting the USB Connection Mode...................................................... 202
Connecting to a Windows PC ................................................................. 204
Connecting the Camera and Your Windows PC ................................. 204
Transferring Images ............................................................................ 205
Disconnecting the Camera from Your Windows PC............................ 207
Starting “MediaImpression 3.5 for PENTAX”....................................... 208
Viewing Images ................................................................................... 210
Details on How to Use “MediaImpression 3.5 for PENTAX”................ 211
Connecting to a Macintosh ..................................................................... 212
Connecting the Camera and Your Macintosh...................................... 212
Transferring Images ............................................................................ 213
Disconnecting the Camera from Your Macintosh ................................ 214
Starting “MediaImpression 2.1 for PENTAX”....................................... 215
Viewing Images ................................................................................... 217
Details on How to Use “MediaImpression 2.1 for PENTAX”................ 217
Transferring Images Using an Eye-Fi Card............................................ 218
Appendix
220
Functions Available for Each Shooting Mode ....................................... 220
Messages .................................................................................................. 223
Troubleshooting....................................................................................... 225
Default Settings ........................................................................................ 227
List of World Time Cities ......................................................................... 232
Optional Accessories .............................................................................. 233
Main Specifications.................................................................................. 234
Warranty Policy ........................................................................................ 239
Index.......................................................................................................... 244
15
In this manual, the method for operating the four-way controller is shown in
illustrations, such as in the one below.
2
2 or
2
4
or 4
4
5
5 or
5
3
3 or
3
The meanings of the symbols used in this Operating Manual are explained below.
1
Indicates the reference page number for an explanation of the
related operation.
Indicates information that is useful to know.
Indicates precautions to be taken when operating the camera.
16
A Mode
This is the mode for taking still pictures and movies. In this
manual, “Still Picture Capture Mode” refers to only the mode for
taking still pictures.
Q Mode
This is the mode for viewing still pictures and playing back movies
and sound files.
Composition of the Operating Manual
This Operating Manual contains the following chapters.
1 Getting Started ––––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera before
you start taking pictures. Be sure to read it and follow the instructions.
2 Common Operations –––––––––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as the functions of the buttons and
how to use the menus. For more details, refer to the respective chapters below.
3 Taking Pictures –––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains the various ways of capturing images and how to set the
relevant functions.
4 Playing Back and Deleting Images ––––––––––––––––––––––––––––––––
1
2
3
4
This chapter explains how to view still pictures and movies on the camera or on
a TV and how to delete images, sound files, and movies from the camera.
5 Editing and Printing ––––––––––––––––––––––––––––––––––––––––––––
5
This chapter explains the various ways of printing still pictures and how to edit
images with the camera.
6 Recording and Playing Back Sound–––––––––––––––––––––––––––––––
6
This chapter explains how to record sound files or add sound (a voice memo) to
an image and how to play back sound files.
7 Settings ––––––––––––––––––––––––––––––––––––––––––––––––––––––
7
This chapter explains how to set camera-related functions.
8 Connecting to a Computer ––––––––––––––––––––––––––––––––––––––
This chapter explains how to connect the camera to a computer, and includes
installation instructions and a general overview of the provided software.
9 Appendix –––––––––––––––––––––––––––––––––––––––––––––––––––––
This chapter deals with troubleshooting and lists the optional accessories.
8
9
17
Camera Features
In addition to basic picture-taking, this camera has a variety of shooting modes to
suit different situations. This section describes how to make the most of the key
features of your camera. For details on how to operate the camera, look at the table
of contents or in the index for specific functions.
Suitable for Outdoor Activities
This camera is both waterproof and dustproof and has a tough body.
You need not worry about sprays of water while fishing or unexpected rain or dust
while trekking.
Functions that expand photo
opportunities to the sea, the hills, and
the rivers
• Waterproof at a depth of 12 meters
(39.4 ft.)
• Take pictures underwater for up to
two hours.
• Covers can be locked*1
• Shockproof performance*2
• Water repellent coating on the lens
cover glass.
*1 This camera has locks for the battery/card and terminal covers. The battery
compartment and the card and terminal compartment are not waterproof or
dustproof. Lock the covers properly before approaching anyplace that is wet
or dirty.
*2 The camera satisfies the PENTAX drop test (1.5 m height onto a 5 cm thick
plywood surface) complying with MIL-Standard 810F Method 516.5-Shock
testing.
• Waterproof performance is not guaranteed if the camera is exposed to impact
such as being dropped or hit.
• The camera is not guaranteed to be free of trouble or damages under every
condition.
18
For taking enlarged pictures of very close objects such
as the veins of leaves or specimens of tiny insects in
Digital Microscope mode (p.77).
For creating an image like an ink rubbing using the Ink
Rubbing Filter (p.148).
Easy-to-Navigate Capture and Playback Functions!
The user-friendly design of the
camera enables easy operation with
only a few buttons. Simply by
choosing the appropriate icon, you
can select the shooting mode (p.67)
and choose the optimal settings for
the situation, or the playback mode
(p.128) and enjoy the various
playback and editing functions. A
guide on the display lets you check the
functions available in each mode and
how to use them.
1/ 2
X
XXXX X
XXXX
XXXX XXXXXXXX
X
XXXX
XXXX
XXXX XXXXXXXX
XXXX
XX
XXXX XXXXXXXX
XX
XX
XX
A shooting mode guide is displayed in the Capture Mode
Palette and a playback mode guide in the Playback Mode
Palette (p.65, p.126).
Use Green Mode to take pictures easily using standard
settings (p.73).
19
Perfect for Portrait Shots!
This camera comes with a “Face Detection” function that spots the faces in your
shot and automatically adjusts the focus and exposure for the faces. It can detect
up to 32 people per shot (*1), so it will help you take perfect group shots too. It
automatically releases the shutter when people are smiling, and if anyone blinks,
it tells you that. It also tells you where faces are detected on the screen (*2), so
you can take the shot again until it is perfect. It also has a feature that lets you
enlarge each person’s face in sequence during playback so you can quickly
check their facial expressions.
*1 Up to 31 face detection frames are displayed on the monitor.
*2 The camera can tell the position of up to 3 detected faces.
Face Detection function (p.69).
Close-ups of people’s faces for easy checking during
playback (p.133).
Self-portrait Assist function tells you the face position
on the screen (p.72).
Advanced Movie Recording Functions!
This camera includes Movie SR to reduce camera shake during movie recording
(p.116). It also supports 1920 x 1080 Full HDTV so you can view your recordings
as stunning wide-screen movies.
Use the camera to shoot fun-filled movies of your
children or pets as a visual diary of their development
(p.113).
20
A Multitude of Functions inside the Camera for
Enjoying Images Without a Computer!
This camera has a variety of functions
to let you enjoy playing back and
editing images without having to
connect the camera to your computer
and transfer the images first. The
camera is all you need to take and edit
still pictures and movies (p.143).
Resize (p.143), Cropping (p.144) and Red-eye
Compensation (p.152) can be used, while the image is
displayed in playback mode.
You can divide a movie in two or select a frame from a
movie to save it as a still picture (p.160).
21
Checking the Contents of the Package
Camera
Optio WG-2 GPS/
Optio WG-2
Carabiner strap
O-ST124 (WG-2 GPS) (*)
O-ST125 (WG-2) (*)
Software (CD-ROM)
S-SW125
USB cable
I-USB7 (*)
AC plug cord (*)
Rechargeable lithium-ion
battery D-LI92 (*)
Utilities Guide for GPS
Before using GPS ....................................... 2
Using the GPS ............................................. 4
This manual describes how to use the Optio WG-2 GPS camera’s GPS function
and precautions when using it. Please read this manual before using the GPS
function with this camera.
54565
Battery charger
D-BC92 (*)
Macro stand
O-MS1
R01BAA12
Printed in Indonesia
Utilities Guide for GPS
(Optio WG-2 GPS only)
Operating Manual
(this manual)
Quick Guide
Items marked with an asterisk (*) are also available as optional accessories.
The battery charger and AC plug cord are only sold as a set (battery charger kit KBC92).
For other optional accessories, refer to “Optional Accessories” (p.233).
22
Names of Parts
Front
Power switch/Power lamp (green)
Lens
Shutter
release button
Flash
Speaker
Microphone
Remote control receiver
Self timer lamp/
Focus assist light
LED Macro Lights
Back
Display
Remote control
receiver
Tripod socket
Terminal cover
Terminal cover
lock lever
Battery/card cover
lock lever
Battery/card cover
PC/AV terminal HDMI terminal
Battery lock lever
23
Names of Operating Parts
Power switch
Shutter release button
W/T/f/y button
Q button
Four-way controller
4/W button
I button
Green/i button
3 button
Refer to “Understanding the Button Functions” (p.48 - 51) for an explanation
of the function of each button.
Macro stand
Attaching the supplied macro stand (O-MS1) reduces camera shake during shooting
in Digital Microscope mode (p.77). Insert two clips above and below the LED Macro
Lights part. When attaching and detaching the macro stand, do not hold the clip part.
* When using the macro stand, the camera may not be able to focus if the objects
have uneven surfaces.
24
Monitor Indications
Display in A Mode
The display changes in the following sequence each time you press the 4/
W button: “Normal Display”, “Histogram + Info”, “No Info”, “LCD Off”.
• All the camera buttons function as normal even when the LCD is off. Press
the shutter release button to take pictures as normal.
• The display cannot be changed in some shooting modes.
Normal Display
Histogram + Info
OK
38
38
12M
AWB
WB
ISO
200
OK
OK
OK
LCD Off
No Info
25
Normal Display in Still Picture Capture Mode
1 to 21 and A1 appear when “Normal Display” is selected. B1 to B6 appear at the
position of 18 when “Histogram + Info” is selected. Only A1 appears when “No
Info” is selected.
11 12
1
2
3
4
5
6
7
8
9
10
26
14
15
16
P
17
A1
DATE
+1.0
1/250
F3.5
38
B5
12M
19 20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
13
200
B6
02/02/'12 14:25
18
AWB
WB
ISO
B1 B2 B3 B4
Shooting mode (p.65)
16
Battery level indicator (p.36)
Face Detection icon (p.70)
17
Date Imprint setting (p.109)
EV Compensation (p.101)
18
Shutter speed
19
Aperture
20
Pixel Track SR icon (p.103)
A1
Memory status (p.41)
B1
Remaining image storage capacity
B2
Flash mode (p.90)
B3
Drive mode (p.81 - p.84)
B4
Focus mode (p.91)
B5
Eye-Fi communication status (p.189)
B6
Digital zoom/Intelligent Zoom icon (p.63)
GPS data
(Optio WG-2 GPS only)
GPS log icon
(Optio WG-2 GPS only)
Date and time (p.46)
World Time setting (p.180)
D-Range Setting (p.102)
Focus frame (p.60)
Recorded pixels (p.96)
Quality Level (p.97)
White Balance (p.98)
AE Metering (p.99)
Histogram (p.31)
Sensitivity (p.100)
* 6 and 7 are only displayed when the shutter release button is pressed half-way.
* For 13, when the focus mode is set to = and the Auto Macro function is
activated, q appears on the display (p.91).
* 14 changes depending on [Eye-Fi] setting in [W Setting] menu.
* 16 changes depending on [GPS] setting in [WSetting] menu.
No icon is displayed on the screen when [GPS On/Off] is set to [Off].
* 17 appears when recording the GPS log.
* 18 disappears two seconds after the camera is turned on.
* 20 changes depending on [D-Range Setting] setting in the [A Rec. Mode]
menu.
No icon is displayed on the screen when [Highlight Correction] and [Shadow
Correction] are both set to P (Off).
* When the shooting mode is b (Auto Picture) and if you press the shutter
release button halfway, the automatically selected shooting mode appears in
A1 even when “No Info” is selected.
* When there is an area on the screen that is overexposed it appears white, the
indicated area blinks red as a warning. Similarly, when there is an area that is
underexposed it appears black, the indicated area blinks yellow as a warning.
* Some indications may not appear depending on the shooting mode.
27
Display in Q Mode
The display shows the shooting information of the image in playback mode. The
display changes in the following sequence each time you press the 4/
W button:
• The display cannot be changed by pressing the 4/W button while
playing back a voice memo/movie or pausing playback.
• Only the Optio WG-2 GPS can display GPS information.
If you are using the Optio WG-2, the display changes to the normal display
by pressing the 4 button at no info display.
Normal Display
Histogram + Info
100 - 0038
100 - 0038
OK
1/250
F3.5
Edit
02/02/'12 14:25
Edit
12M
AWB
WB
OK
OK
100 0038
100-0038
GPS 02/02/'12 06: 25: 00
Edit
N 35 45' 52"
W139 41' 29"
GPS information display
28
ISO
OK
Edit
No Info
200
Histogram + Info Display in Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. A1 to A11 also
appear when “Normal Display” is selected. B1 to B8 appear only when “Histogram
+ Info” is selected.
A1
A2
A3
A4
A5
B1
B2
100 - 0038
1/250
F3.5
A6
B3
Edit
12M
B5
A1
A2
A3
A4
A5
A6
A7
A8
A9
A7
A8
A9
A10
A11
Face Detection icon (p.69)
Playback mode
Q : Still Picture (p.122)
K : Movie (p.123)
L : Sound (p.170)
Battery level indicator (p.36)
Protect icon (p.138)
Voice memo icon (p.172)
Four-way controller guide
File number
Folder number (p.183)
Memory status (p.41)
B6
AWB
WB
B7
ISO
200
B4
B8
A10 Eye-Fi communication status
(p.189)
A11 Volume icon
B1 Shutter speed
B2 Aperture
B3 Histogram (p.31)
B4 Sensitivity (p.100)
B5 Recorded pixels (p.96)
B6 Quality Level (p.97)
B7 White Balance (p.98)
B8 AE Metering (p.99)
* A1 appears only if the Face Detection function worked when the image was
shot.
* In “Normal Display”, A3 disappears if no operation is performed for two
seconds.
* A6 appears even when “No Info” is selected, but disappears if no operation is
performed for two seconds. When no operation is performed for two seconds in
“Normal Display” or “Histogram + Info”, only “Edit” disappears.
* A11 appears only when the volume is being adjusted during playback of
movies, sounds, or voice memos (p.123, p.170, p.172).
* When “Normal Display” is selected, the current date and time appears for two
seconds in the B4 to B8 positions.
29
* When there is an area on the screen that is overexposed it appears white, the
indicated area blinks red. Similarly, when there is an area that is underexposed
it appears black, the indicated area blinks yellow.
GPS Information Display in Playback Mode (displayed only on the Optio
WG-2 GPS)
1
2
3
100 - 0038
7
8
9
10
11
GPS 02/02/'12 06: 25: 00
12
13
14
4
5
6
N 35 45' 52"
W139 41' 29"
Edit
1
2
3
4
5
6
7
Face Detection icon
Playback mode
Battery level indicator
Protect icon
Voice memo icon
Four-way controller guide
File number
8
9
10
11
12
13
14
Folder number
Memory status
Eye-Fi communication status
Volume icon
Positioning time
Positioning latitude
Positioning longitude
* 12 is displayed in GPS time (time data received from GPS satellites). This may
be different from the time you have set on the camera.
Guide Display
A guide for each available button operation appears as follows on the display
during operation.
2
3
4
5
MENU
30
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
3 button
OK
SHUTTER
X, i
I, J
Zoom button
4/W button
Shutter release button
Green/i button
I button
Histogram
Number of pixels→
A histogram shows the brightness
distribution of an image. The
horizontal axis represents
brightness (dark at the left and
bright at the right) and the vertical
axis represents the number of
pixels.
The shape of the histogram
(Dark) ←Brightness→ (Bright)
before and after shooting tells you
whether the brightness and
Dark portions
Bright portions
contrast are correct or not, and
lets you decide if you need to use EV compensation and take the picture again.
Setting the Exposure (EV Compensation) 1p.101
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is
underexposed, the peak is on the left side, and if it is overexposed, the peak is on
the right side.
Dark image
Correct image
Bright image
When the image is underexposed, the part to the left is cut off (dark portions) and
when the image is overexposed, the part to the right is cut off (bright portions).
This camera has a function where overexposed areas are indicated as blinking
red and underexposed areas as blinking yellow.
Understanding Contrast
The graph peaks gradually for images in which contrast is balanced. The graph
peaks on both sides but sinks in the middle for images with a large difference in
contrast and low amounts of mid-level brightness.
31
Attaching the Carabiner Strap
Attach the carabiner strap supplied with the camera.
1
Getting Started
1
2
Pass the end of the strap through the strap lug on the camera.
Fix the end of the strap to the stopper.
Protective rubber ring
The carabiner has rubber rings to prevent damage to the display. These rubber rings
cushion the impact when the carabiner hits the display.
Be sure to adjust the position of the rubber rings as shown in the figure below for the
best results before using the carabiner strap.
32
1Getting Started
Powering the Camera
Charging the Battery
1
Charging indicator
While charging: Lights
Charging finished: Turns off
3
2
Getting Started
Use the supplied battery charger (D-BC92) to charge the supplied rechargeable
lithium-ion battery (D-LI92) before using it in the camera for the first time or after
a long period of non-use, or when the [Battery depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, rated 125
V, 7A, minimum 6 ft (1.8 m)”
To power outlet
Battery
Battery charger
1
2
3
4
1
AC plug cord
Connect the AC plug cord to the battery charger.
Plug the AC plug cord into the power outlet.
Place the battery in the battery charger so that the PENTAX
logo is facing up.
The charging indicator turns on while charging.
When charging is finished, the charging indicator turns off.
Remove the battery from the battery charger when charging is finished.
• Do not charge batteries other than the rechargeable lithium ion D-LI92
battery using the supplied D-BC92 battery charger. Doing otherwise may
cause damage or overheating.
• The battery has reached the end of its service life when it starts to run down
soon after being charged. Replace it with a new battery.
• If the battery is inserted correctly but the charging indicator fails to light, the
battery may be faulty. Replace it with a new battery.
33
The time required to fully charge the battery is about 120 minutes (max.).
(The charging time may vary depending on the ambient temperature and
charging conditions.) The appropriate ambient temperature for charging the
battery is 0°C to 40°C (32°F to 104°F).
1
Getting Started
Installing the Battery
Use the rechargeable lithium-ion battery D-LI92 that is provided with the camera.
Charge the battery before using it in the camera for the first time.
Battery lock lever
Battery/card cover
lock lever
Battery
1
2
Battery/card
cover
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide the cover
towards 2 and open it towards 3.
Using the side of the battery to press the battery lock lever in
the direction of 4, insert the battery with the PENTAX logo
pointing toward the lens.
Push the battery in until it is locked in place.
If the battery is incorrectly oriented, malfunction may result.
3
Close the battery/card cover.
Push down and slide the battery/card cover with steady but gentle force in the
opposite direction indicated by 2.
34
Removing the Battery
1
2
Open the battery/card cover.
Press the battery lock lever towards 4.
• Do not use excessive force when sliding the battery/card cover open and
closed because the waterproof packing may peel off. If the packing is not
in the correct position, the camera will not be waterproof.
• If the battery/card cover is not locked securely when you close it, water,
sand, or dirt may get into the camera.
• This camera uses a rechargeable lithium-ion battery D-LI92. Use of any
other type of battery may damage the camera and cause malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented, malfunction
may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the battery for 30
minutes using the battery charger and store the battery separately.
Be sure to recharge the battery every 6 to 12 months. Storing the battery
below room temperature is ideal. Avoid storing it in high temperatures.
• The date and time may be returned to the default setting if the camera is
left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the camera
is used continuously for a long period of time.
• Allow the camera to dry completely before changing the battery. Avoid
changing the battery where the camera is likely to get wet or dirty, and
make sure that your hands are dry.
1
Getting Started
The battery will be ejected. Take care not to drop the battery when removing it.
35
• Image Storage Capacity, Movie Recording Time, Sound Recording Time,
and Playback Time
(at 23°C or 73.4°F with the display on and the battery fully charged)
1
Getting Started
Image Storage
Capacity*1
(flash used for 50% of
shots)
Movie Recording
Time*2
Sound Recording
Time*2
Playback Time*2
Approx. 260 pictures
Approx. 70 min.
Approx. 270 min.
Approx. 240 min.
*1 Recording capacity shows approximate number of shots recorded during
CIPA-compliant testing (with display on, flash used for 50% of the shots, and
23°C or 73.4°F). Actual performance may vary according to operating
conditions.
*2 According to the results of in-house testing.
• Battery performance may deteriorate as temperature decreases. When
using the camera in cold regions, we recommend carrying a spare battery
in your pocket to keep it warm. Battery performance will return to normal in
normal temperatures.
• If [GPS On/Off] on the [GPS] setting is set to [On], the camera performs
positioning regularly even if it is turned off, which reduces the battery life.
• Be sure to take a spare battery with you when traveling abroad or to a cold
region, or if you intend to take a lot of pictures.
• Battery Level Indicator
You can check the battery level by the indicator on the display.
Screen Display
Adequate power remains.
(green)
Battery is running low.
(yellow)
Battery is running very low.
(red)
[Battery depleted]
36
Battery Status
(green)
Battery is exhausted.
The camera will turn off after this message appears.
Using the AC Adapter
Use of the optional AC adapter kit (K-AC117) is recommended if you intend to use
the camera for a long time or connect it to a computer.
Getting Started
1
6
3
5
DC terminal
1
2
3
4
5
6
1
4
DC coupler
Make sure that the camera is turned off and open the battery/
card cover.
Remove the Battery.
Refer to p.34 - p.35 on how to open the battery/card cover and remove the
battery.
Insert the DC coupler.
Using the side of the DC coupler to press the battery lock lever, insert the DC
coupler. Confirm that the DC coupler is locked in place.
The battery/card cover will not close while the DC coupler is inserted. Leave the
cover open when using the AC adapter and do not attempt to close it.
Connect the DC terminal of the AC adapter to the DC terminal
of the DC coupler.
Connect the AC plug cord to the AC adapter.
Plug the AC plug cord into the power outlet.
37
1
Getting Started
38
• Make sure that the camera is turned off before connecting or disconnecting
the AC adapter.
• Make sure that the AC plug cord and the DC terminal connecting the AC
adapter to the camera are inserted securely. Data may be lost if either
becomes disconnected while data is being recorded on the SD Memory
Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “About the Battery Charger and the AC Adapter” (p.3)
before using the AC adapter.
• Be sure to read the operation manual accompanying the AC adapter kit KAC117 before using the adapter.
• When connecting the AC adapter, you cannot set the camera upright on the
table because the cord from the DC coupler comes out of the bottom of the
camera.
• Do not use excessive force when sliding the battery/card cover open and
closed because the waterproof packing may peel off. If the packing is not
in the correct position, the camera will not be waterproof.
Installing the SD Memory Card
• Be sure to use this camera to format (initialize) an SD Memory Card
that is unused or has been used on other cameras or digital devices.
Refer to “Formatting the Memory” (p.174) for instructions on
formatting.
• Make sure that the camera is turned off before inserting or removing the SD
Memory Card.
• Allow the camera to dry completely before changing the SD Memory Card.
Avoid changing the card where the camera is likely to get wet or dirty, and
make sure that your hands are dry.
• Do not use excessive force when sliding the battery/card cover open and
closed because the waterproof packing may peel off. If the packing is not
in the correct position, the camera will not be waterproof.
1
Getting Started
This camera uses SD Memory Cards, SDHC Memory Cards or SDXC Memory
Cards. (These cards are referred to as SD Memory Cards hereafter.) Captured
images and sound files are saved on the SD Memory Card if a card is inserted in
the camera. They are saved in the built-in memory if a card is not inserted (p.41).
• The number of still pictures that can be stored varies depending on the
capacity of the SD Memory Card and the selected number of recorded
pixels and quality level (p.235).
• The power lamp blinks while the SD Memory Card is being accessed (data
is being recorded or read).
Backing Up Data
The camera may not be able to access data in the built-in memory in the case of a
malfunction. Use a computer or other device to back up important data in another
location.
39
1
Getting Started
SD Memory Card
socket
1
2
3
Battery/card cover
SD Memory Card
Open the battery/card cover.
Press the battery/card cover lock lever in the direction shown 1, slide the cover
towards 2 and open it towards 3.
Insert the SD Memory Card into the SD Memory Card socket
so that the label is facing toward the front of the camera (the
side with the lens).
Push the card in all the way. Images and sound may not be recorded correctly
if the card is not inserted all the way.
To remove the SD Memory Card, push it in once and then pull it out.
Close the battery/card cover.
Push down and slide the battery/card cover with steady but gentle force in the
opposite direction indicated by 2.
If the battery/card cover is not locked securely when you close it, water, sand,
or dirt may get into the camera.
• The file size differs depending on the number of recorded pixels of the
images and the number of the recordable images to the SD Memory Card
also differs.
• Set the number of recorded pixels for still pictures from [A Rec. Mode]
menu and for movies from [C Movie] menu.
• For an approximate number of recordable images or time that can be saved
on an SD Memory Card, see “Main Specifications” (p.234).
40
Turning the Camera On and Off
Power switch/Power lamp
1
Getting Started
1
Press the power switch.
2
The camera turns on and both the power lamp and display turn on.
If the [Language/
] screen or [Date Adjustment] screen appears when you
turn the camera on, follow the procedure on p.43 to set the display language and/
or current date and time.
Press the power switch again.
The camera turns off and both the power lamp and display turn off.
Taking Still Pictures 1p.60
Checking the SD Memory Card
The SD Memory Card is checked when the
camera turns on and the memory status is
displayed.
a
+
r
The SD Memory Card is inserted. Images
and sound files will be saved on the SD
Memory Card.
The SD Memory Card is not inserted.
Images and sound files will be saved in the
built-in memory.
The write-protect switch on the SD Memory
Card is in the LOCK position (p.7). Images
and sounds cannot be recorded.
38
Memory status
41
Starting-up in Playback Mode
1
Use this function when you want to play back images or sound files straightaway
without taking any pictures.
Getting Started
Power switch
Q button
1
Press and hold down the Q button.
The display turns on and the camera starts up in playback mode.
• To switch from playback mode to A mode, press the Q button or press
the shutter release button halfway.
• In order to set the start up in playback mode to off, set [Playback Mode] to
P (Off) from [Startup Shortcut] in the [W Setting] menu. (p.194)
Playing Back Still Pictures 1p.122
42
Initial Settings
The language, date, and time can be changed later. Refer to the pages below for
instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.182).
• To change the date and time, follow the steps in “Changing the Date and Time”
(1p.176).
1
Getting Started
The [Language/
] screen appears when the camera is turned on for the first
time. Perform the operations in “Setting the Display Language” below to set the
language, and in “Setting the Date and Time” (p.46) to set the current date and
time.
Setting the Display Language
Four-way controller
4 button
3 button
1
2
Use the four-way controller (2345) to choose the display
language.
Press the 4 button.
The [Initial Setting] screen appears in the
selected language. If the desired settings
for [Hometown] and [DST] (Daylight Saving
Time) appear, proceed to Step 9.
Initial Setting
English
Hometown
New York
DST
OFF
Settings complete
MENU
Cancel
Daylight saving time
43
3
Press the four-way controller (3).
The frame moves to [W Hometown].
Initial Setting
English
Hometown
New York
1
DST
OFF
Settings complete
Getting Started
MENU
4
5
Cancel
Press the four-way controller (5).
The [W Hometown] screen appears.
Use the four-way controller (45)
to choose a city.
Hometown
City
New York
DST
MENU
6
7
8
9
10
Cancel
Press the four-way controller (3).
The frame moves to [DST] (Daylight Saving Time).
Use the four-way controller (45) to select O or P.
Press the 4 button.
The [Initial Setting] screen reappears.
Press the four-way controller (3) to select [Settings
complete].
Press the 4 button.
The [Date Adjustment] screen appears. Next, set the date and time.
44
OK
OK
If you accidentally select the wrong language and go to the next procedure, perform
the following operation to set the language back.
1
Press the four-way controller (5).
Use the four-way controller (2345) to select the language
and press the 4 button.
The [Initial Setting] screen appears in the selected language.
1
2
3
4
5
6
7
When the Screen After Step 2 Appears in the Wrong Language
Press the 3 button.
Getting Started
1
2
When the Wrong Language Has Been Inadvertently Selected
This exits the settings screen and returns the camera to capture mode.
Press the 3 button.
The [A Rec. Mode] menu appears.
Press the four-way controller (5) twice.
Use the four-way controller (32) to select [Language/
].
Press the four-way controller (5).
The [Language/
] screen appears.
Use the four-way controller (2345) to select the
language.
Press the 4 button.
The [W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown], [Date]
and [Time], refer to the pages below for instructions.
• To change [Hometown], follow the steps in “Setting the World Time” (1p.180).
• To change the date and time, follow the steps in “Changing the Date and Time”
(1p.176).
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. See the following pages for information on
the available video output formats and how to change the initial settings.
• Video output formats available initially: “List of World Time Cities” (1p.232)
• To change the video output format: “Changing the Video Output Format” (1p.187).
45
Setting the Date and Time
Set the current date and time and the display format.
1
1
Press the four-way controller (5).
Getting Started
The frame moves to [mm/dd/yy].
2
Use the four-way controller (23)
to choose the date and time
display format.
Choose from [mm/dd/yy], [dd/mm/yy] or [yy/
mm/dd].
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2012
00:00
Time
Settings complete
MENU Cancel
3
Press the four-way controller (5).
The frame moves to [24h].
4
5
6
7
8
9
10
Use the four-way controller (23) to select [24h] (24-hour
display) or [12h] (12-hour display).
Press the four-way controller (5).
The frame returns to [Date Format].
Press the four-way controller (3).
The frame moves to [Date].
Press the four-way controller (5).
The frame moves to the month.
Use the four-way controller (23) to change the month.
Change the day and year in the same manner.
Next, change the time.
If you selected [12h] in step 4, the setting switches between am and pm
corresponding to the time.
Press the four-way controller (3) to select [Settings
complete].
Press the 4 button.
This confirms the date and time.
If you press the 4 button in step 10, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time signal (on
the TV, radio, etc.) reaches 00 seconds.
46
When the [Initial Setting] or [Date Adjustment] screen is displayed, you can
cancel the setting operation and switch to the capture mode by pressing the
3 button. In this case, the [Initial Setting] screen will appear next time
you turn the camera on.
1
Getting Started
[Language/
], [Date], [Time], [Hometown] and [DST] can be changed. Refer to
the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.182).
• To change the date and time, follow the steps in “Changing the Date and Time”
(1p.176).
• To change the city or turn DST on and off, follow the steps in “Setting the World
Time” (1p.180).
47
Understanding the Button Functions
A Mode
1
2
2
Common Operations
3
4
5
6
8
9
7
1
Power switch
Turns the camera on and off (p.41).
2
Shutter release button
Focuses the camera on the subject when pressed halfway in Still Picture
Capture Mode (except when the focus mode is set to 3, s, and \) (p.61).
Takes a still picture when pressed down fully (p.61).
Pressing down fully starts and stops movie recording in C (Movie),
(Underwater Movie), and
(High Speed Movie) modes (p.111, p.113).
Pressing down fully starts and stops sound file recording in O (Voice Recording)
mode (p.169).
3
W/T button
Changes the captured area (p.63).
4
Q button
Switches to the Q mode (p.52).
5
Four-way controller
(2)
(3)
(4)
(5)
(23)
48
:
:
:
:
:
Changes the drive mode (p.81 - p.84).
Displays the Capture Mode Palette (p.67).
Changes the flash mode (p.90).
Changes the focus mode (p.91).
Adjusts the focus when the focus mode is set to \ (p.92).
2Common Operations
6
4/W button
Changes the information on the display (p.25).
7
3 button
Displays the [A Rec. Mode] menu (p.53).
8
I button
9
Green button
Switches to 9 (Green) mode (p.73).
Calls up the assigned function (p.105).
2
Common Operations
Switches the Face Detection function (p.69). The Face Detection function is
switched as follows each time the I button is pressed:
Smile Capture ´ Self-portrait Assist ´ Self-portrait Assist + Smile Capture ´
Face Detection Off ´ Face Detection On
Selects or registers a pet in e (Pet) mode.
49
Q Mode
1
2
2
3
Common Operations
4
5
6
8
9
7
1
Power switch
Turns the camera on and off (p.41).
2
Shutter release button
Switches to A mode (p.52).
3
f/y button
In single-image display, pressing f switches to 6-image display. Pressing f
again switches to 12-image display (p.124). Press y to return to the previous
display.
In single-image display, pressing y enlarges the image. Press f to return to
the previous display (p.132).
In 12-image display press f to change to folder or calendar display (p.125).
In folder/calendar display, press y to change to 12-image display (p.125).
Adjusts the volume during playback of movies, sound files or voice memo
(p.123, p.170, p.172).
4
Q button
Switches to A mode (p.52).
50
5
Four-way controller
(2)
(3)
(45)
6
2
Common Operations
(2345)
: Plays back and pauses a movie or sound file (p.123, p.170,
p.172).
: Displays the Playback Mode Palette (p.128).
Stops a movie or sound file during playback (p.123, p.170,
p.172).
: Displays the previous or next image and sound file during singleimage display (p.122).
Fast-forwards, fast-reverses, frame forwards, frame reverses,
reverses a movie and makes a movie play forwards during
playback (p.123).
Fast forwards, reverses, and moves to the next index in sound
file playback (p.170).
: Moves the display area during zoom display (p.132).
Selects an image in 6- or 12-image display, a folder in folder display,
and a date in calendar display (p.124, p.125).
Moves the image when using the Frame Composite function
(p.154).
Adjusts the position of a frame or an image when you are using
the Original Frame function (p.158).
4/W button
Changes the information on the display (p.28).
Returns zoom, 6- or 12-image display to single-image display (p.125, p.132).
Changes to 12-image display of the selected folder during folder display (p.125).
Changes to single-image display of the selected date during calendar display
(p.126).
7
3 button
Displays the [W Setting] menu during single-image display (p.53).
Returns to single-image display during Playback Mode Palette display (p.127).
Returns zoom, 6- or 12-image display to single-image display.
Changes to 12-image display of the selected folder during folder display (p.126).
Changes to 12-image display of the selected date during calendar display
(p.126).
8
I button
Zooms up on the subjects’ faces in the order in which they were recognized
during shooting (Face close-up playback) (p.133).
9
Green/i button
Switches from single-image display to the Delete screen (p.135).
Switches from 6- or 12-image display to the Select & Delete screen (p.136).
Switches from folder display to the calendar display screen (p.125).
Switches from calendar display to the folder display screen (p.125).
51
Switching Between A Mode and Q Mode
In this manual, the capture mode, such as for taking still pictures, is referred to as
“A mode” (capture mode). Playback mode, such as for displaying captured
images on the monitor, is referred to as “Q mode” (playback mode). In Q mode,
you can perform simple editing operations on the images that are played back.
Follow the procedure below to switch between A mode and Q mode.
2
To Switch from A Mode to Q Mode
Common Operations
1
Press the Q button.
The camera switches to Q mode.
To Switch from Q Mode to A Mode
1
Press the Q button or the shutter release button halfway.
The camera switches to A mode.
Displaying data stored in the built-in memory
When an SD Memory Card is inserted in the camera, still pictures, movies, and
sounds on the SD Memory Card are displayed. If you want to display still pictures,
movies, and sounds stored in built-in memory, turn the camera off and remove the
SD Memory Card.
Make sure that the camera is turned off before inserting or removing the
SD Memory Card.
52
Setting the Camera Functions
To change the camera settings, press the 3 button to display the [A Rec.
Mode] menu or [W Setting] menu. Functions for playing back and editing images
and sound files are displayed from the Playback Mode Palette.
Operating the Menus
2
In capture mode
MENU
P
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
38
SHUTTER
'10/02/02 14:25
1/4
Bright
12M 16:9
Common Operations
There are three types of menu: [A Rec. Mode], [C Movie] and [W Setting]. Press
the 3 button in A mode to display the [A Rec. Mode] menu. Press the
3 button in Q mode to display the [W Setting] menu.
Use the four-way controller (45) to move between menus.
AWB
MENU Exit
Movie
Recorded Pixels
Mov i e SR
SHUTTER
MENU Exit
100 0038
100-0038
MENU
Setting
Sound
Date Adjustment
Alarm
World Time
Text Size
Language
Edit
' 102/02/'12
0 / 0 2 / 0 2 114:25
4:25
1/4
01/01/2012
Standard
English
MENU Exit
In playback mode
53
• Available button and key operations appear on the display during menu
operation.
• The 3 button function differs depending on the screen. Refer to the
guide indications.
2
Common Operations
54
MENU Exit
Exits the menu and returns to the original screen.
MENU
Returns to the previous screen with the current setting.
MENU Cancel Cancels the current selection, exits the menu and
returns to the previous screen.
Menu List
This displays the items that can be set with the menus and provides descriptions
of each item. See the list of default settings in the Appendix “Default Settings”
(p.227) to decide whether you want the settings saved when the camera is turned
off and whether you want the settings returned to the defaults when the camera
is reset.
Item
Image Tone
Recorded Pixels
Quality Level
Description
For setting the tone of images
For choosing the number of recorded pixels of still pictures
For setting the quality level of still pictures
For adjusting the color balance according to the
White Balance
lighting conditions
When = (Standard), q (Macro), or
(1cm
Focusing
Macro) is selected as the focus mode, you can
Area
change the autofocus area (Focusing Area)
AF
Setting Auto Macro For choosing whether or not to use the auto macro function
For setting whether or not to use the focus assist
Focus
Assist
light
For choosing the area of the screen that is metered
AE Metering
to determine the exposure
Sensitivity
For setting the sensitivity
For setting the adjustment range when sensitivity is
AUTO ISO Range
set to AUTO
EV Compensation
For adjusting the overall brightness of the picture
Highlight
For setting whether to perform bright portion
D-Range Correction compensation
Setting Shadow
For setting whether to perform dark portion
Correction compensation
For choosing whether to compensate for camera
Pixel Track SR
shake while taking still pictures
For choosing whether to use the Blink Detection
Blink Detection
function with the Face Detection function
For choosing whether or not to use the digital zoom
Digital Zoom
function
Instant Review
For choosing whether to display Instant Review
For choosing whether to save the set values of the
Memory
shooting function or return to the defaults when the
camera is turned off
Page
p.95
p.96
p.97
p.98
p.93
2
Common Operations
[A Rec. Mode] Menu
This menu shows the functions related to taking still pictures and recording
movies.
p.94
p.94
p.99
p.100
p.101
p.101
p.102
p.102
p.103
p.104
p.65
p.104
p.120
55
Item
2
Common Operations
Description
For assigning a function to the Green button in A
Green Button
mode
Sharpness
For choosing sharp or soft outlines
Saturation
For setting the color saturation. When [Monochrome] is
(Tone Adjustment)
selected, the item changes to [Tone Adjustment]
Contrast
For setting the image contrast level
For choosing whether to imprint the date and/or time
Date Imprint
when taking still pictures
IQ Enhancer*
For setting whether to perform the IQ enhancer.
For setting whether or not to turn on the LED Macro
Macro Light
Lights for macro photography
*IQ Enhancer = Image Quality Enhancer
[A Rec. Mode] Menu 1
Rec. Mode
Image Tone
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
1/4
Bright
12M
AWB
[A Rec. Mode] Menu 3
Rec. Mode
MENU Exit
p.105
p.108
p.108
p.109
p.109
p.110
p.110
[A Rec. Mode] Menu 2
Rec. Mode
Sensitivity
Auto ISO Range
EV Compensation
D-Range Setting
Pixel Track SR
Blink Detection
2/4
AUTO
ISO125-1600
0.0
MENU Exit
MENU Exit
Digital Zoom
Instant Review
Memory
Green Button
Sharpness
Saturation
Page
3/4
[A Rec. Mode] Menu 4
Rec. Mode
Contrast
Date Imprint
IQ Enhancer
Macro Light
4/4
Off
MENU Exit
• Use 9 (Green) mode to enjoy easy picture-taking using standard settings,
regardless of the settings in the [A Rec. Mode] menu (p.73).
• Assigning frequently used functions to the Green button enables you to go
straight to the desired function (p.105).
56
[C Movie] Menu
Item
Description
For choosing the number of recorded pixels and the
frame rate for movies
For choosing whether or not to use the Movie Shake
Reduction function
Recorded Pixels
Movie SR
Page
p.115
p.116
2
[C Movie] Menu
Common Operations
Movie
Recorded Pixels
Mov i e SR
MENU
Exit
[W Setting] Menu
Item
Sound
Date Adjustment
Alarm
World Time
Text Size
Language/
Folder Name
File Name
USB Connection
Video Out
HDMI Out
Eye-Fi
Brightness Level
Description
For adjusting the operation volume and playback
volume, and setting the start-up sound, shutter
sound, key operation sound, and self-timer sound
For adjusting the date and time
For setting the alarm
For setting the hometown and destination
For setting the text size of the menu
For setting the language in which menus and
messages appear
For choosing how names are assigned to folders for
storing images and sound files
For choosing how names are assigned to images and
sound files
For setting the method for connecting to a PC (MSC
or PTP)
For setting the output format to the AV equipment
For setting the HDMI output format when connecting
to an AV device with an HDMI terminal
For setting whether or not to use Eye-Fi
communication
For changing the brightness of the display
Page
p.175
p.176
p.178
p.180
p.182
p.182
p.183
p.185
p.202
p.187
p.188
p.189
p.189
57
Item
2
Common Operations
Description
For setting the time until the camera enters powerPower Saving
saving mode
For setting the time until the camera turns off
Auto Power Off
automatically
For choosing whether to use [Quick Zoom] (p.132)
Quick Zoom
when playing back images
For setting whether to display explanations for
Guide Display
selected items in Capture Mode Palette and Playback
Mode Palette displays
For returning settings other than the date and time,
Reset
language, world time and video out to their defaults
Delete All
For deleting all the images and sound files at once
Pixel Mapping
For correcting for defective pixels on the CCD sensor
Playback For choosing whether to start-up the camera in
Mode
playback mode.
Startup LED
For choosing whether to turn the LED Macro Lights
Shortcut Lighting on while the camera is turned off.
Clock
For choosing whether to display the clock while the
Display
camera is turned off.
Format
For formatting the SD Memory Card/built-in memory
GPS
For setting whether to record the GPS data on
On/Off
captured images
GPS
For setting the interval and duration of logs. Saving
GPS (*) Logging and deleting of received logs can be selected also.
GPS
For setting whether to correct the clock in the camera
Time
automatically using the received GPS data
Sync
(*) Optio WG-2 GPS only
58
Page
p.190
p.190
p.191
p.191
p.194
p.137
p.192
p.194
p.194
p.194
p.174
GPS
Guide
[W Setting] Menu 1
Setting
Sound
Date Adjustment
Alarm
World Time
Text Size
Language
[W Setting] Menu 2
01/01/2012
Standard
English
Folder Name
File Name
USB Connection
Video Out
HDMI Out
2/4
Date
IMGP
MSC
NTSC
Auto
Eye- Fi
2
MENU Exit
[W Setting] Menu 4
[W Setting] Menu 3
Setting
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
Setting
3/4
5sec.
3min.
Delete All
Pixel Mapping
Startup Shortcut
Format
GPS
4/4
Common Operations
MENU Exit
MENU Exit
Setting
1/4
MENU Exit
59
Taking Still Pictures
3Taking Pictures
Taking Pictures
This camera is equipped with functions and shooting modes that support a wide
array of scenes and subjects. This section explains shooting using the default
settings when shipped.
Power switch
Shutter release button
3
W/T button
Taking Pictures
1
2
Press the power switch.
The camera turns on and is ready to take still pictures. In this manual, this is
called Still Picture Capture Mode.
Confirm the subject and shooting
information on the display.
The focus frame in the middle of the display
indicates the zone of automatic focusing.
38
Focus frame
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.69).
38
Face detection frame
60
3
Press the shutter release button
halfway.
The camera emits focus assist light in dark
shooting situations.
The focus frame (or face detection frame)
on the display turns green when the camera
focuses on the subject at the correct
distance.
1/250
F4.6
38
Press the shutter release button fully.
The picture is taken.
The flash discharges automatically depending on the light conditions.
The image appears on the display temporarily (Instant Review: p.63) and is
saved to the SD Memory Card or the built-in memory.
• Press the Green button to switch to 9 (Green) mode and let the camera
set all the shooting functions automatically (p.73).
• f is displayed when the shutter release button is pressed halfway if there
is a risk of camera shake.
3
Taking Pictures
4
You can change the captured area by pressing the zoom button (p.63).
Right (T)
Enlarges the subject.
Left (W)
Widens the area that is captured by the camera.
61
Using the Shutter Release Button
The shutter release button works in a two-step action as follows.
Press halfway
This refers to pressing the shutter release button gently to the first position. This
locks the focus setting and the exposure. The green focus frame lights on the
display when the shutter release button is pressed halfway and the subject is in
focus. If the subject is out of focus, the frame turns white.
3
Press fully
This refers to pressing the shutter release button all the way down to the fully
depressed position. This takes a picture.
Taking Pictures
Not pressed
Pressed halfway Pressed fully
(second position)
(first position)
Poor focusing conditions
The camera may not be able to focus under the following conditions. In these cases,
lock the focus on an object the same distance away as the subject (by pressing and
holding the shutter release button halfway), then aim the camera at your subject and
press the shutter release button fully.
• Objects that lack contrast such as a blue sky or white wall
• Dark places or objects, or conditions that prevent light being reflected back
• Intricate patterns
• Fast moving objects
• When there is an object in the foreground and an object in the background in the
captured area
• Strongly reflected light or strong backlighting (bright background)
62
Instant Review and Blink Detection
The image appears on the display temporarily (Instant Review) immediately after
it is captured. If the camera detects that the subject’s eyes are closed while Face
Detection (p.69) is activated, the message [Closed eyes have been detected]
appears for 3 seconds (Blink Detection).
• When the Face Detection function does not work, Blink Detection also does
not function. Even if the subject’s faces are recognized, Blink Detection
may not function depending on the condition of the recognized faces.
• You can also disable the Blink Detection function (p.104).
3
Taking Pictures
Using the Zoom
You can use the zoom to change the captured area.
W/T button
Four-way controller
4 button
3 button
1
Press the W/T button in A mode.
W Wide (left)
Widens the area that is captured
by the camera.
T Tele (right)
Enlarges the subject.
Zoom ratio
Zoom bar
36
If you continue to press T, the camera
automatically switches from optical zoom to
Intelligent Zoom and stops at the point where
38
the zoom switches to digital zoom.
Once the button is released and pressed again, the camera switches to digital
zoom.
If the digital zoom is set to off on the menu, the optical zoom and the Intelligent
Zoom ranges are available for use. The zoom ratio of the Intelligent Zoom
changes depending on the number of recorded pixels.
The zoom bar is displayed as follows.
63
Zoom in with high image quality.
Optical zoom range*1
Zoom in with some degree of image
deterioration.
Intelligent
Zoom range*2
Digital zoom
range
*1 You can zoom in to a maximum of 5× optically.
*2 The Intelligent Zoom range differs depending on the recorded pixels. See the
following table.
3
Recorded pixels and the maximum zoom ratio
Taking Pictures
Recorded Pixels
/
/
Intelligent Zoom
(The zoom ratio includes the 5× optical zoom.)
Digital zoom
Not Available (5× optical zoom only)
6/
Approx. 7.5×
f/
Approx. 8.9×
h
Approx. 11.3×
h
V (*)
Not Available (5× optical zoom only)
l
Approx. 22.5×
Equivalent to
approx. 36×
Approx. 12×
Equivalent to
approx. 36×
Approx. 36× (same as digital zoom)
m
(*) V can only be set for recorded pixels when
(Report) mode is set.
• We recommend you use a tripod to prevent camera shake when taking
pictures at high zoom.
• Pictures taken in the digital zoom range appear grainier than pictures taken
in the optical zoom range.
• For details on the available functions, refer to “Functions Available for Each
Shooting Mode” (p.220).
• The image enlarged using Intelligent Zoom may appear rough on the
display. This does not affect the quality of the recorded image.
• Intelligent Zoom is available regardless of whether digital zoom is turned on
or off.
64
To Set the Digital Zoom
The digital zoom is set to O (On) in the default settings. To take pictures using
only the optical zoom and Intelligent Zoom, set the digital zoom to P (Off).
1
2
3
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
Use the four-way controller (23) to select [Digital Zoom].
Use the four-way controller (45)
to switch between O (On) or P
(Off).
4
3/4
MENU Exit
Press the 3 button.
The camera returns to capture mode.
3
Taking Pictures
Uses digital zoom
Uses only optical zoom and
Intelligent Zoom
The setting is saved.
O(On)
P (Off)
Rec. Mode
Digital Zoom
Instant Review
Memory
Green Button
Sharpness
Saturation
Saving the Digital Zoom Function setting 1p.120
Setting the Shooting Mode
This camera has a variety of shooting modes that let you take pictures or record
movies and sound in different situations simply by choosing the right mode for the
particular situation from the Capture Mode Palette.
Four-way controller
4 button
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
65
2
Use the four-way controller
(2345) to choose a shooting
mode.
A guide of the selected shooting mode is
displayed in the lower part of the display.
Landscape
For capturing landscape
views. Enhances colors
of sky and foliage
MENU Cancel
3
1/2
OK
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
3
Taking Pictures
66
OK
The following 24 modes can be selected with Capture Mode Palette.
Item
Description
Page
The camera automatically selects the
appropriate capture mode from the following
fifteen modes
Night Scene
Night Scene
Portrait
Landscape
Flower
Portrait
Sport
Candlelight
Blue Sky
Portrait×
Blue Sky
Portrait×
Backlight
Sunset
Portrait×
Sunset
Group
Photograph
Text
3
⎯
Taking Pictures
b Auto Picture
Standard
* When the camera detects the pet’s full face,
the shutter is automatically released.
R Program
Used for basic shooting. The shutter speed and
the aperture are set automatically by the camera
during shooting. However, you can select other
functions such as the flash mode and recorded
pixels
⎯
A Night Scene
For night time images. Use of a tripod or other
support is suggested
⎯
Handheld Night
Snap
Minimizes camera shake for shooting at night or
other low light settings
⎯
Movie
For recording movies. Sound is recorded at the
same time
p.113
Underwater
For capturing images underwater
C
Underwater Movie Use this mode for taking underwater movie
p.111
p.111
Digital Microscope
Capture the bigger images of the closer objects
(fixed to h)
a
Landscape
For capturing landscape views. Focuses the
camera on wide range
⎯
b
Flower
For images of flowers. The outline of the flower is
softened
⎯
p.77
67
Item
c
Description
Page
Portrait
For capturing portraits. Reproduces a healthy
and bright skin tone
Interval Shot
Shoots a series of images at a specified interval
of time
p.79
Interval Movie
Shoots a series of images at a specified interval,
and saves them as a movie
p.116
High Speed Movie
Records a high speed movie for slow motion
playback
p.119
c Digital SR
⎯
⎯
⎯
3
Q Surf & Snow
Taking Pictures
Higher sensitivity reduces blur
For bright images such as sand or snow.
Accurately meters for bright scenes
R
For capturing moving kids. Reproduces a healthy
and bright skin tone
Kids
e Pet
\
Sport
U
Candlelight
S Fireworks
For capturing moving pets. Available to detect
registered pets
p.74
For a fast moving subject. Tracks the subject until
the picture is taken
⎯
For capturing scenes in candlelight
⎯
For capturing fireworks. Use of a tripod or other
support is suggested
⎯
⎯
B
Night Scene
Portrait
For images of people at night. Use of a tripod or
other support is advised
B
Text
Captures text in an easy to read manner. Text
contrast can be adjusted
K
Food
For images of food and prepared dishes.
Enhances saturation and contrast
X Digital Wide
⎯
Stitches two pictures together to create a wider
image (fixed to h)
Stitches images taken with the camera to create
p.77
⎯
p.85
F Digital Panorama a panoramic photograph
p.87
For capturing images with a frame. Recorded
N Frame Composite pixels is fixed to h or h
p.78
Report
For capturing image with fixed 1280×960 pixels
for reports
⎯
* 9 (Green) (p.73) and O (Voice Recording) (p.168) modes are available in addition
to the ones noted above.
68
• In shooting modes other than R (Program), A (Night Scene), C (Movie),
(Digital Microscope),
(Handheld Night Snap),
(Interval Shot),
(Interval Movie),
(High Speed Movie), c (Digital SR), F (Digital
Panorama), X (Digital Wide), and N (Frame Composite), Saturation,
Contrast, Sharpness, White Balance, etc. are automatically set to the
optimal settings for the selected mode.
• Some functions may not be available or may not function fully depending
on the selected shooting mode. For details, refer to “Functions Available for
Each Shooting Mode” (p.220).
• You can turn off the shooting mode guide on the Capture Mode Palette
(p.191).
• The shutter speed tends to be slower when taking pictures of dark scenes.
To prevent camera shake, set the Pixel Track SR to O (On) (p.103) or use
a tripod and/or remote control (optional), the self-timer function (p.81).
Taking Pictures
Using the Face Detection Function
When the camera detects a person’s face in the
image, the Face Detection function displays a
yellow face detection frame around the face on the
display screen, sets the focus (Face Detection AF)
and compensates the exposure (Face Detection
AE).
If the subject in the face detection frame moves,
the frame also moves and changes size as it
tracks the face.
The Face Detection function can recognize up
to 32 people’s faces. If it recognizes multiple
faces, the camera displays a yellow frame over
the main face and white frames over the other
faces. It can display up to a total of 31 frames,
including both the main and white frames.
3
38
Face detection frame
When the multiple faces are
detected
38
Main frame
White frame
69
3
• Face Detection AF and AE may not work if the subject is wearing
sunglasses, has part of their face covered or is not looking toward the
camera.
• If the camera cannot detect the subject’s face, the camera focuses using
the setting currently selected in [Focusing Area].
• However, the Smile Capture function may not work and an image may not
be captured, even when turned on, depending on the condition of the
recognized faces, such as the faces are too small. If this happens, press
the shutter release button to take a picture.
• In e (Pet) mode, the Face Detection mode is switched to Pet Detection
(only one pet).
• If you use the Face Detection function when the flash mode is set to
, (Auto), the flash mode automatically changes to d (Flash On + Redeye).
Taking Pictures
To Switch the Face Detection Function
By default, the Face Detection function is set to Face Detection On. You can
switch to the Smile Capture function, which automatically releases the shutter
when your subject smiles. The Face Detection function is switched as follows
each time the I button is pressed:
Smile Capture ´ Self-portrait Assist ´ Self-portrait Assist + Smile Capture ´
Face Detection Off ´ Face Detection On
I button
An icon indicating either Face Detection or Smile Capture appears on the display.
(The Face Detection Off icon only appears right after the Face Detection function
is switched to off.)
70
Face Detection On
P
Smile Capture
Self-portrait Assist
P
P
P
P
Self-portrait Assist
+ Smile Capture
The Face Detection function cannot be selected in some shooting modes.
Refer to “Functions Available for Each Shooting Mode” (p.220) for details.
Taking Pictures
Face Detection Off
3
71
To Use the Self-portrait Assist Function
The LED Macro Lights around the lens blink when the camera detects people
faces in the Self-portrait Assist or Self-portrait Assist + Smile Capture function.
The position of the blinking LED indicates where the detected face is on the
screen.
The position (area) of the detected face corresponds to the blinking LED as
follows.
1
6
1
3
Taking Pictures
2
5
3
4
6
2
5
3
4
Example 1. When the camera detects a person in area 1 on the display.
Example 2. When the camera detects two people in areas 2 and 5 on the
display.
72
Taking Pictures in Basic Mode (Green Mode)
In 9 (Green) mode, you can enjoy easy picture-taking using standard settings,
regardless of the settings in the [A Rec. Mode] menu.
9 mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
Information Display
Pixel Track SR
Recorded Pixels
White Balance
Focusing Area
Auto Macro
Focus Assist
AE Metering
Image Tone
Quality Level
, (Auto)
9 (Standard)
= (Standard)
Standard
P (Off)
(4608×2592)
F (Auto)
J (Multiple)
O (On)
O (On)
L (Multi-segment
metering)
Bright
D (Better)
Highlight Correction
Shadow Correction
Sensitivity
EV Compensation
Blink Detection
Digital Zoom
Instant Review
Sharpness
Saturation
Contrast
Date Imprint
IQ Enhancer
Macro Light
3
Taking Pictures
• When the camera detects two faces in the same area, the closest LED to
the blinking LED also blinks.
• The camera can tell the position of up to three detected faces by blinking
LED.
• When the camera detects three faces in area 2, LED 1 to 3 blink.
• When the camera detects three faces in area 5, LED 4 to 6 blink.
• When the camera detects four or five faces, the LED blink depending on
the number of detected faces. When the camera detects six or more faces,
all LED (six) blink (the lights do not tell the position of detected faces).
• In b (Auto Picture) mode, LED turn off after pressing the shutter release
button halfway when the camera is in a mode with no Face Detection
function.
• When the Self-portrait Assist function is on, LED do not turn off after the set
period of Power Saving.
• LED do not blink when the detected faces are too small.
P (Off)
P (Off)
AUTO (125-1600)
±0.0
O (On)
O (On)
O (On)
G (Normal)
G (Normal)
G (Normal)
Off
O (On)
P (Off)
73
1
3
2
Taking Pictures
3
Press the Green button in A
mode.
The camera switches to 9 mode.
Press the Green button again to return
to the status before 9 mode was
selected.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.69).
\
38
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses on the
subject at the correct distance.
Press the shutter release button fully.
The picture is taken.
• Assign 9 mode to the [Green Button] on the [A Rec. Mode] menu for
using 9 mode (p.105). (The default setting is 9 mode).
• Press the 3 button in 9 mode to display the [W Setting] menu. The
[A Rec. Mode] menu cannot be displayed.
• When the camera is turned off in 9 mode, it turns on in 9 mode next time
the power switch is pressed.
Taking Pictures of Your Pet (Pet Mode)
In e (Pet) mode, the camera automatically releases the shutter when the pet is
detected. Also the camera can register pets.
1
2
Use the four-way controller (2345) to select e (Pet) from
the Capture Mode Palette.
Press the 4 button.
e (Pet) mode is selected and the camera returns to capture status.
When the camera detects the pet’s full face, the shutter is automatically
released.
74
To Register the Pet
1
Press the I button on the
capture status screen in e (Pet)
mode.
Selecting pet to shoot
The pet selection screen appears.
New Registry
MENU Cancel
2
Press the I button again.
OK
OK
If pet face turns to camera
front, it's self-registering
MENU
3
Taking Pictures
The pet registration screen appears.
Aiming the camera at the pet’s full face
automatically releases the shutter and the
pet registration confirmation dialog
appears.
Cancel
Pet registration screen
When you select [Registry] using four-way
controller (2) and press the 4 button,
the picture of the registered pet is indicated
on the upper-left corner of the display and
the camera returns to the capture status.
Register this image?
Registry
Cancel
OK
OK
Registry confirmation screen
When the camera detects the pet’s full
face, the camera automatically releases
the shutter.
You can also take a picture by pressing the
shutter release button.
When you press the I button twice in the
capture status screen, the pet registration
screen appears to register another pet. You
can register up to three pets.
38
Selection / Registry
Capture status screen
• When you press the 3 button on the pet registration screen, the
registration will be canceled and the camera returns to the Still Picture
Capture Mode.
• Only dogs and cats can be registered using the Pet Detection function.
Other animals or human faces cannot be registered. You may not be able
to register a pet’s face if, for example, the pet’s face is too small.
• The camera may not detect the registered pet’s face, depending on the
shooting situation.
75
To Switch the Pet You Want to Shoot
If you have registered two or three pets, choose the pet you want to detect.
1
Press the I button on the
capture status screen in e (Pet)
mode.
Selecting pet to shoot
The pet registration screen appears.
MENU Cancel
3
2
Taking Pictures
3
Delete
OK OK
Use the four-way controller (45) to select the pet you want to
detect.
Press the 4 button.
The selected pet is switched to the pet you want to detect and the camera
returns to capture status.
To Delete the Pet from the Entry
1
Press the I button on the
capture status screen in e (Pet)
mode.
Selecting pet to shoot
The pet registration screen appears.
MENU Cancel
2
3
4
5
Use the four-way controller (45) to select the pet you want to
delete.
Press the i button.
Use the four-way controller (2) to select [Delete].
Press the 4 button.
The selected pet is deleted.
76
Delete
OK OK
Taking Pictures of Text (Text Mode)
Take crisp and easy-to-read pictures of text. It is useful for taking pictures of and
saving important documents, and when the text is too small and difficult to read.
1
A picture of the text is taken in its original color.
Reversed Color
The colors are reversed.
B&W
A picture of the text is taken in black and white.
Negative
Black and white are reversed.
Use the four-way controller (2345) to select
the Capture Mode Palette.
(Text) from
Press the 4 button.
The text mode selection screen appears.
MENU Cancel
3
4
Use the four-way controller (23) to select
OK
,
3
Taking Pictures
2
Color
,
, or
OK
.
Press the 4 button.
The selected icon appears and the camera returns to capture status.
Taking Pictures in Digital Microscope Mode
In
(Digital Microscope) mode, you can take pictures of objects as close as 1
cm, also because the LED Macro Lights around the lens are always lighted, you
can take minute pictures of text, the veins of leaves, or specimens of tiny insects
etc.
The illumination of the LED Macro Lights may be uneven or insufficient
depending on the shooting conditions.
1
2
Use the four-way controller (2345) to select
Microscope) from the Capture Mode Palette.
(Digital
Press the 4 button.
mode is selected and the camera returns to capture mode.
77
3
Press the W/T button.
If you press T, the camera enlarges the subject.
You can enlarge the subject up to 6.5 times(*).
(*)Intelligent Zoom is included. Up to 1.8 times for optical zoom.
W Wide (left)
Widens the area that is captured by the camera.
T Tele (right)
Enlarges the subject.
Attaching the supplied macro stand (O-MS1) reduces camera shake during
macro photography (p.24).
3
Taking Pictures
Framing Your Pictures (Frame Composite Mode)
In N (Frame Composite) mode, you can take pictures using the frames stored
in the camera.
1
2
3
Use the four-way controller (2345) to select N (Frame
Composite) from the Capture Mode Palette.
Press the 4 button.
The 12-frame display of the frame selection screen appears.
Use the four-way controller
(2345) to choose the frame
you want to use.
OK OK
4
Press the y button.
The selected frame appears in single-image display.
You can choose another frame using either of the following operations.
Four-way controller (45) Press to choose a different frame.
Zoom button left (f)
Press to return to the 12-frame display of the frame
selection screen, and then perform step 4 to
choose a different frame.
78
5
Press the 4 button.
The frame appears on the display.
When the camera detects a person’s face, the Face Detection function is
activated and the face detection frame appears (p.69).
At shipment, the camera includes 3 default frames for each aspect ratio (4:3
and 16:9).
Optional Frames
Adding a Frame to a captured image 1p.153
Taking Pictures at a Set Interval (Interval Shot)
3
Taking Pictures
The optional frames are stored in the CD-ROM supplied with the camera. To use
these frames, copy them from the CD-ROM (p.155). These optional frames are
deleted if the files on the built-in memory are deleted with a computer or if the builtin memory is formatted.
In this mode, a set number of pictures can be taken automatically at a set interval
from a set time.
Set the camera to take pictures at intervals. The
intervals can be set in increments of one second from
Interval
10 sec. – 99 min.
ten seconds to 4 minutes, or in 1 minute increments
from 4 to 99 minutes. You cannot set the camera to
take interval shots at less than ten seconds.
Number
2 shots – number of You can set this to up to 1000 shots. However, it
of Shots
recordable images cannot exceed the number of recordable images.
You can set 1 minute increments for the first 59
minutes and 1 hour increments from there. If the
Start Delay 0 min. – 24 hours
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
1
2
3
Use the four-way controller (2345) to select
Shot) from the Capture Mode Palette.
(Interval
Press the 4 button.
The current interval shot settings appear for approximately 1 minute. To take
pictures with the current settings, go to step 10.
Press the 4 button while the settings are displayed.
The [Interval Shot] setting screen appears. [Interval] is marked with the frame.
79
4
Set the interval.
1 Press the four-way controller (5).
2 Use the four-way controller (23)
to set the minutes, then press the
four-way controller (5).
3 Use the four-way controller (23)
to set the seconds, then press the
four-way controller (5).
3
5
Taking Pictures
6
Interval Shot
Interval
0min. 10 sec.
Number of Shots
Start Delay
2
0hr.
0 min.
MENU
The frame returns to [Interval].
Press the four-way controller (3).
The frame moves to [Number of Shots].
Set the number of shots.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
7
8
The frame returns to [Number of Shots].
Press the four-way controller (3).
The frame moves to [Start Delay].
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
9
10
11
The frame returns to [Start Delay].
Press the 3 button.
The [Interval Shot] settings are saved and the camera returns to capture mode.
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
Press the shutter release button fully.
Interval shooting starts.
The LCD turns off between shots (during standby). Press the power switch during
standby to display the remaining number of shots and interval on the monitor.
The [Stop interval shooting?] message is displayed when the power switch and
then the 3 button are pressed during standby. Pressing the 4 button
cancels interval shooting.
80
• Even if an alarm is set, the alarm will not ring during interval shooting.
• Interval shot stops if the SD Memory Card is removed or inserted during
standby.
Using the Self-timer
In Self-timer mode, the picture is taken ten seconds or two seconds after the
shutter release button is pressed.
Stabilize the camera with a tripod or other support when taking a picture with the
self-timer.
Z
1
2
3
4
Use this mode when you want to be included in a group picture. The picture
is taken approximately ten seconds after the shutter release button is pressed.
Use this mode to avoid camera shake. The picture is taken approximately two
seconds after the shutter release button is pressed.
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
3
Taking Pictures
g
Use the four-way controller (45) to select g and press the
four-way controller (3).
Use the four-way controller (45)
to select g or Z and press the
4 button.
The camera is ready to take the picture
using the self-timer.
When the camera detects a person’s face,
the Face Detection function is activated
and the face detection frame appears
(p.69).
Drive Mode
Self-timer
MENU Cancel
OK
OK
Press the shutter release button to take a picture.
Countdown starts and the remaining seconds are displayed on the screen.
If you select g
The self timer lamp and all of the LED Macro Lights turn on.
From 5 seconds before shooting, the LED Macro Lights turn off in
order from the top right.
From 3 seconds before shooting, the self timer lamp also blinks.
If you select Z
The self timer lamp and the LED Macro Lights blink.
81
The picture is taken after a countdown of either ten seconds or two seconds.
Focusing may be compromised if you move the camera while the self-timer
lamp is blinking when taking still pictures.
• In C (Movie),
(Underwater Movie) and
(High Speed Movie) modes,
recording will start after ten seconds or two seconds.
• Press the shutter release button halfway while the self-timer is engaged to
stop the countdown and press fully to restart the countdown.
• Z cannot be selected while 9 (Green) mode is in default setting. Select Z
in another shooting mode and then switch the shooting mode to 9.
• The self-timer lamp does not turn on or blink in e (Pet) mode.
• In the following situations, the LED Macro Lights remain turned on
regardless of the countdown.
- In
(Digital Microscope) mode
- When [Macro Light] on the [A Rec. Mode] menu is set to O (On)
• g/Z cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
3
Taking Pictures
Taking a Series of Pictures (Continuous
Shooting/Burst Shooting)
Pictures are taken continuously as long as the shutter release button is pressed.
j
c
Each time a picture is taken, the image is saved in the memory
Continuous
before the next image is taken. The higher the image quality,
Shooting
the longer the interval between shots.
Burst
The number of recorded pixels is fixed at f/
and the
Shooting
interval between shots is shorter than “Continuous Shooting”.
* The number of images that can be shot continuously and the interval between shots
depend on shooting situations.
1
2
3
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
Use the four-way controller (45) to select j or c and press
the 4 button.
The camera is ready for continuous shooting and burst shooting.
Press the shutter release button to take a picture.
Pictures are taken continuously as long as you keep the shutter release button
pressed.
j/c cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
82
• With j, you can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
• The interval of j varies according to the [Recorded Pixels] and [Quality
Level] settings.
• The focus, exposure and white balance are locked with the first shot.
• When the Face Detection function is activated (p.69), it works only when
taking the first shot.
• The Blink Detection function works only for the last shot.
• The number of recorded pixels is fixed at f/
in c mode. When the
shooting mode is set to
(Report), the number of recorded pixels is set
to V.
You can use the remote control (optional) to take pictures while you are away
from the camera.
i
h
1
2
3
The shutter will be released after about three seconds when the shutter release
button on the remote control unit is pressed.
The shutter will be released immediately when the shutter release button on
the remote control unit is pressed.
3
Taking Pictures
Taking Pictures Using the Remote Control Unit
(Optional)
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
Use the four-way controller (45) to select i and press the
four-way controller (3).
Use the four-way controller (45)
to select i or h and press the
4 button.
The self-timer lamp begins to blink slowly
and the camera is ready to take a picture
with the remote control.
When the camera detects a person’s face,
the Face Detection function is activated
and the face detection frame appears (p.69).
Drive Mode
Remote Control
MENU Cancel
OK
OK
83
4
Point the remote control at the remote control receiver and
press the shutter release button on the remote control.
The focus frame turns green when the subject is in focus and the camera takes
a picture at the following timing.
When i is selected:
The self-timer lamp and the LED Macro Lights blink quickly and the
camera takes a picture after about three seconds.
When h is selected:
The camera takes a picture immediately.
• The shooting with remote control is available from the front of the camera
and the back of the camera.
• The operating range is approx. 4 m from the front of the camera and 2 m
from the back of it.
• In C (Movie),
(Underwater Movie) and
(High Speed Movie) modes,
pressing the shutter release button again stops the recording.
• The camera takes a picture even if the focus is not achieved.
• If the shutter release button on the camera is pressed halfway during the
countdown, the countdown stops. If the shutter release button on the
remote control is pressed again, the camera starts the countdown again.
• i/h cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
• The self-timer lamp does not turn on or blink in e (Pet) mode.
3
Taking Pictures
Taking Pictures with Automatic Exposure
Adjustment (Auto Bracketing)
Press the shutter release button once to automatically adjust the exposure and
take three pictures in succession. After taking the pictures, you can select the best
one.
The shooting order is best exposure → –1.0 EV → +1.0 EV.
1
2
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
Use the four-way controller (45) to select a (Auto
Bracketing) and press the 4 button.
The camera is now ready to take pictures with Auto Bracketing.
• When the Instant Review is set to O (On) (p.104), the pictures taken are
shown in Instant Review after shooting (p.63).
• a cannot be selected in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
84
Using the Digital Wide Function (Digital Wide
Mode)
In X (Digital Wide) mode, you can stitch two vertical images captured with this
camera into a single frame up to approx. 21 mm coverage (35 mm film
equivalent).
3
+
2
Use the four-way controller (2345) to select X (Digital
Wide) from the Capture Mode Palette.
Taking Pictures
1
Press the 4 button.
The camera enters X mode.
Turn the camera 90° clockwise and align your first
picture.
When the camera detects a person’s face, the
Face Detection function is activated and the face
detection frame appears (p.69).
1
38
85
3
Press the shutter release button to take
a picture.
2
The first captured image is temporarily saved, and
the shooting screen for the second image is
displayed.
3
OK
Taking Pictures
4
Exit
Take the second image.
Overlap the image on the preview guide on the left of the screen to compose the
second image. Repeat steps 4 and 5 to take the second image. This combines
first and second images.
The stitched first and second image appears on the display temporarily (Instant
Review), and then is saved.
• To minimize distortion when taking the second image, turn the camera so
that it pivots around the right edge of the preview guide on the screen.
• Some distortion may result from moving objects, repeating patterns, or if
nothing exists when overlapping the first and second image on the preview
guide.
• When the Face Detection function is activated (p.69), it works only when
taking the first shot.
• The number of recorded pixels for images captured with X mode is fixed
at f.
To Cancel after Taking the First Shot
1
When the shooting screen for the second image is displayed
in step 5 on p.86, press the 4 button or the four-way
controller (3).
A confirmation dialog appears.
86
2
Use the four-way controller (23) to select an option and
press the 4 button.
Save
Discard
Cancel
Saves the first image and you can retake the first shot. The first
image is saved at h.
Discards the first image and you can retake the first shot.
Returns to the shooting screen for the second image.
Taking Panoramic Pictures (Digital Panorama
Mode)
1
2
3
4
Use the four-way controller (2345) to select F (Digital
Panorama) from the Capture Mode Palette.
Press the 4 button.
The camera enters F mode and the message [Set shift direction] is displayed.
Use the four-way controller (45)
to choose the direction in which
the images will be joined.
The screen for taking the first frame is
displayed.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.69).
3
Taking Pictures
In F (Digital Panorama) mode, you can stitch together two or three captured
frames to create a panoramic photograph with the camera.
Set shift direction
Press the shutter release button to take a picture.
The screen for taking the second frame is displayed after you take the first
frame.
If you select right (5) in step 4:
The right edge of the first frame appears in semi-transparent form on
the left edge of the display.
If you select left (4) in step 4:
The left edge of the first frame appears in semi-transparent form on
the right edge of the display.
87
5
Take the second frame.
1 2
Move the camera so that the semitransparent image and the actual view
overlap and press the shutter release
button.
SHUTTER
6
2nd Frame
OK
Exit
Take the third frame.
Repeat steps 4 to 5 to take the third frame.
The panorama images are joined and a stitched together image appears.
The stitched together image does not appear when [Instant Review] (p.104) is
off.
3
Taking Pictures
• Some distortion may result from moving objects, repeating patterns, or if
nothing exists when overlapping the first and second frames or the second
and third frames on the preview guide.
• When the Face Detection function is activated (p.69), it works only when
taking the first shot.
To Cancel after Taking the First or Second Frame
1
2
After shooting the first frame in step 6 on p.88 or the second
frame in step 7, press the 4 button or the four-way
controller (3).
A confirmation dialog appears.
Use the four-way controller (23) to select an option and
press the 4 button.
Save
Saves the captured image(s) and you can retake the first frame.
When this option is selected after shooting the second frame, the first
and the second frames are stitched together and saved as a
panoramic photograph.
Discard Discards the captured image(s) and you can retake the first frame.
Cancel Returns to the previous shooting screen.
Unstitched images shot in F mode are fixed at i (1600×1200).
88
Setting the Shooting Functions
Setting the Rec. Mode Menu
Settings for shooting are mostly set from the [A Rec. Mode] menu. Refer to
explanations for each function on how to make these settings.
1
The [A Rec. Mode] menu appears.
Pressing the 3 button in C (Movie),
(Underwater Movie),
(High
Speed Movie) and
(Interval Movie) modes displays the [C Movie] menu.
Use the four-way controller (2345) to select an item and
set it up.
To Finish the Setting
3
After setting, press the 3 button.
The camera returns to capture status.
The setting is saved and the camera returns to the previous screen.
3
Taking Pictures
2
Press the 3 button in Still Picture Capture Mode.
To Save the Setting and Start Taking Pictures
3
Press the shutter release button halfway.
The setting is saved and the camera returns to capture mode.
When the [W Setting] menu is displayed from Q mode, you can switch to
A mode by pressing the Q button.
To Save the Setting and Start Playback of Images
3
Press the Q button.
When the [A Rec.Mode] , [C Movie] or [W Setting] menu is displayed from
A mode, the setting is saved and the camera returns to playback mode.
To Cancel the Changes and Continue with Menu Operations
3
Press the 3 button.
The changes are canceled and you can select a menu.
89
The 3 button function differs depending on the screen. Refer to the
guide indications.
MENU Exit
Exits the menu and returns to the original screen.
MENU
Returns to the previous screen with the current setting.
MENU Cancel
Cancels the current selection, exits the menu and returns
to the previous screen.
Selecting the Flash Mode
3
Taking Pictures
,
Auto
a
Flash Off
b
Flash On
c
d
The flash discharges automatically depending on the light
conditions.
The flash does not discharge, regardless of the brightness.
Use this mode to take pictures where flash photography is
prohibited.
The flash discharges regardless of the brightness.
This mode reduces the phenomenon of red eyes caused by
Auto + Red-eye the light from the flash being reflected in the subject’s eyes.
The flash discharges automatically.
This mode reduces the phenomenon of red eyes caused by
Flash On +
the light from the flash being reflected in the subject’s eyes.
Red-eye
The flash discharges regardless of the light conditions.
• The selectable function differs depending on the shooting mode, focus
mode or drive mode you have set. Refer to “Functions Available for Each
Shooting Mode” (p.220) for details.
• If you use the Face Detection function when , is selected, the mode is
automatically set to d.
• A pre-flash discharges when using the red-eye reduction function.
Using the flash when capturing images at a close distance may cause
irregularities in the image due to the light distribution.
1
Press the four-way controller (4)
in A mode.
The [Flash Mode] screen appears.
The flash mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
90
Flash Mode
Auto
MENU
Cancel
OK
OK
2
Press the 4 button.
The setting is saved and the camera returns to capture mode.
About the red-eye phenomenon
Taking pictures using the flash may cause the subject’s eyes to appear red in the
resulting picture. This phenomenon occurs when the light from the flash is reflected
in the subject’s eyes. It can be reduced by illuminating the area around the subject or
moving closer to the subject and zooming out to a wider angle. Setting the flash mode
to c (Auto + Red-eye) or d (Flash On + Red-eye) is also an effective way of reducing
red eyes.
If the subject’s eyes appear red despite such precautions, they can be corrected by
the red-eye compensation function (p.152).
Selecting the Focus Mode
= Standard
q
Macro
1cm Macro
3 Pan Focus
s
Infinity
Taking Pictures
Saving the Flash Mode setting 1p.120
3
This mode is used when the distance to the subject is from 50 cm
to ∞. The camera is focused on the subject in the autofocus area
when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is from 10 cm
to 60 cm. The camera is focused on the subject in the autofocus
area when the shutter release button is pressed halfway.
This mode is used when the distance to the subject is from 1 cm
to 30 cm. The camera is focused on the subject in the autofocus
area when the shutter release button is pressed halfway.
This mode is used when you ask someone to take pictures for
you, or when taking pictures of the scenery through the window
of a car or train. The entire picture, from the front to the back, is
focused.
This mode is used for taking distant objects. The flash is set to
a (Flash Off).
\ Manual Focus This mode lets you adjust the focus manually.
91
1
Press the four-way controller (5)
in A mode.
Focus Mode
Standard
The [Focus Mode] screen appears.
The focus mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
MENU Cancel
2
OK
OK
Press the 4 button.
The setting is saved and the camera returns to capture mode.
3
Taking Pictures
• The selectable function differs depending on the shooting mode. Refer to
“Functions Available for Each Shooting Mode” (p.220) for details.
• The noise from focusing is recorded when a focus mode other than 3 or
s is selected in C (Movie),
(Underwater Movie) and
(High Speed
Movie) modes.
• When [Auto Macro] is on and shooting with q selected, if the subject is
further than 60 cm away, the camera automatically focuses to ∞ (Infinity).
Saving the Focus Mode setting 1p.120
To Set the Manual Focus
The procedure for setting the focus manually (\) is described below.
1
Press the four-way controller (5) in A mode.
The [Focus Mode] screen appears.
2
3
4
Use the four-way controller (5) to select \.
Press the 4 button.
The central portion of the image is magnified to full screen on the display.
Press the four-way controller
(23).
The \ indicator appears on the display to
indicate the approximate distance to the
subject. Use the four-way controller (23)
to adjust the focus using the indicator as a
guide.
2 for distant focus
3 for closer focus
92
2m
1
0.5
MENU
OK
OK
\ indicator
5
Press the 4 button.
The focus is fixed and the camera returns to capture mode.
After the focus is fixed, you can press the four-way controller (5) again to
display the \ indicator and readjust the focus.
The shooting mode and drive mode cannot be changed while the \
indicator is displayed.
To switch from \ to another focus mode, press the four-way controller (5)
while the \ indicator is displayed.
3
You can change the autofocus area (Focusing Area).
J Multiple
K Spot
W Automatic Tracking AF
1
2
3
4
5
6
Normal autofocus area
The autofocus area becomes smaller.
Keeps moving subjects in focus.
Taking Pictures
Changing the Focusing Area (= area)
Use the four-way controller (23) to select [AF Setting] on the
[A Rec. Mode] menu.
Press the four-way controller (5).
The [AF Setting] screen appears.
Use the four-way controller (23) to select [Focusing Area].
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to change the Focusing
Area.
Press the 4 button.
The setting is saved.
The selectable function differs depending on the shooting mode. Refer to
“Functions Available for Each Shooting Mode” (p.220) for details.
93
Setting the Auto Macro
When [Auto Macro] is on, the focus is adjusted to the macro range (distance to
the subject is 10 cm to 60 cm) as necessary, even if the focus mode setting is AF
(Standard).
When it is off and the focus mode is set to Standard (=), the AF operates only in
the standard range, and focusing is not done in the macro range.
When the focus mode is set to Macro or 1cm Macro, the focus is only adjusted in
the respective macro range and is not done in the standard range.
1
3
Taking Pictures
2
3
4
Use the four-way controller (23) to select [AF Setting] on the
[A Rec. Mode] menu.
Press the four-way controller (5).
The [AF Setting] screen appears.
Use the four-way controller (23) to select [Auto Macro].
Use the four-way controller (45) to select O (On)/P (Off).
The setting is saved.
Setting the = Assist Light (Focus Assist)
The camera automatically emits the focus assist light in dark shooting situations.
You can set the light to on or off.
1
2
3
4
Use the four-way controller (23) to select [AF Setting] on the
[A Rec. Mode] menu.
Press the four-way controller (5).
The [AF Setting] screen appears.
Use the four-way controller (23) to select [Focus Assist].
Use the four-way controller (45) to select O (On)/P (Off).
The setting is saved.
Looking at the light directly will not create a safety hazard. However, do not
look into the emitter from a very short distance since you may feel dazzled.
The camera does not emit the focus assist light depending on the shooting
mode or focus mode. Refer to “Functions Available for Each Shooting Mode”
(p.220) for details.
94
Setting the Image Tone
For setting the tone of images.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
2
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select a finishing tone.
Press the 4 button.
The setting is saved.
When [Monochrome] is selected, [Tone Adjustment] appears on the [A Rec.
Mode] menu for setting the tone of monochrome images instead of
[Saturation].
3
Taking Pictures
3
4
Use the four-way controller (23) to select [Image Tone] on
the [A Rec. Mode] menu.
95
Selecting the Number of Recorded Pixels
You can choose the number of recorded pixels settings for still pictures.
The larger the number of recorded pixels, the clearer the details will appear when
you print your picture. As the quality of the printed picture also depends on the image
quality, exposure control, resolution of the printer, and other factors, you do not need
to select more than the required number of recorded pixels. h is adequate for
making postcard-size prints. The more pixels there are, the larger the picture and the
bigger the file size.
Refer to the following table for the appropriate settings according to expected
usage.
Recorded Pixels
Expected Usage
Taking Pictures
4608×3456
For printing high quality photos or A4-size pictures or
larger, or editing images on a computer.
3456×3456
4608×2592
6
3072×2304
3072×1728
f
2592×1944
2592×1464
h
Clearer
3
2048×1536
h 1920×1080
V
1280×960
l
1024×768
m
640×480
For making postcard-size prints.
For posting on a website or attaching to e-mail.
• The default setting is
.
• V can only be set for recorded pixels when
appear in the Recorded Pixels menu.
If you select
/6/f/h/l/m,
the aspect ratio of the screen is 4:3. The
monitor display for recording and
playback is as shown on the right.
(Report) mode is set. V does not
P
38
96
1
Use the four-way controller (23) to select [Recorded Pixels]
on the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to change the number of
recorded pixels.
4
Press the 4 button.
The setting is saved.
Selecting the Quality Level of Still Pictures
Select the quality level (data compression ratio) for still images according to how
the images will be used.
The more stars (E), the higher the quality of the image, but the file size increases.
The selected recorded pixels setting also affects the size of the image file (1p.96).
3
Taking Pictures
The selectable number of recorded pixels differs depending on the shooting
mode. Refer to “Functions Available for Each Shooting Mode” (p.220) for
details.
Quality Level
C
1
2
3
4
Best
D
Better
E
Good
Lowest compression ratio. Suitable for photo prints.
Standard compression ratio. Suitable for viewing the image
on a computer screen. (default setting)
Highest compression ratio. Suitable for attaching to e-mails
or creating websites.
Use the four-way controller (23) to select [Quality Level] on
the [A Rec. Mode] menu.
Press the four-way controller (5).
The pull-down menu appears.
Use the four-way controller (23) to change the quality level.
The number of recordable still pictures is displayed at the top of the screen when
you select a quality level.
Press the 4 button.
The setting is saved.
97
Adjusting the White Balance
You can take pictures in natural colors by adjusting the white balance according
to the light conditions at the time of shooting.
Auto
The camera adjusts the white balance automatically.
G
l
Daylight
Use this mode when taking pictures outside in sunlight.
Shade
Use this mode when taking pictures outside in the shade.
I
Tungsten Light
3
J
Fluores. Light
Taking Pictures
K
Manual
F
Use this mode when taking pictures under electric or other
tungsten light.
Use this mode when taking pictures under fluorescent
light.
Use this mode when adjusting the white balance manually.
• Set another white balance if you are not satisfied with the color balance of
pictures taken with the white balance set to F.
• The White balance setting may not be changed depending on the selected
shooting mode. Refer to “Functions Available for Each Shooting Mode”
(p.220) for details.
1
2
3
Use the four-way controller (23) to select [White Balance] on
the [A Rec. Mode] menu.
Press the four-way controller (5).
The [White Balance] screen appears.
Use the four-way controller (23)
to change the setting.
White Balance
Auto
You can check the results of available white
balance settings on the preview image each
time you press the four-way controller.
MENU
4
Cancel
OK
OK
Press the 4 button.
The setting is saved.
If you change the [White Balance] setting frequently, you can save time by
assigning the Fn settings to the Green button (p.105).
Saving the White Balance setting 1p.120
98
Manual Setting
Have a blank sheet of white paper or similar material ready.
1
2
3
Point the camera at the blank sheet of paper or other material
so that it fills the frame displayed in the center of the screen.
Press the shutter release button fully.
The white balance is automatically adjusted.
Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode] menu.
Setting the AE Metering
You can set the area of the screen where the brightness is metered to determine
the exposure.
L
M
N
1
2
3
4
Multi-segment
metering
Centerweighted
metering
Spot AE
metering
3
Taking Pictures
4
In the [White Balance] screen, use the four-way controller
(23) to select K (Manual).
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
The camera takes a reading of the overall brightness of the
picture with the center of the image having more influence
on the exposure.
The camera determines the exposure by metering the
brightness only at the center of the image.
Use the four-way controller (23) to select [AE Metering] on
the [A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select a metering
method.
Press the 4 button.
The setting is saved.
99
• When the shutter release button is pressed halfway, the brightness is
metered and the exposure is determined.
• When the subject is outside the focusing area and you want to use Spot AE
metering, aim the camera at the subject and press and hold the shutter
release button halfway to lock the exposure, then compose your picture
again and press the shutter release button fully.
• The AE Metering setting may not be changed depending on the selected
shooting mode. Refer to “Functions Available for Each Shooting Mode”
(p.220) for details.
Saving the AE Metering setting 1p.120
3
Taking Pictures
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
AUTO
125
200
400
800
1600
3200
6400
1
2
3
4
The sensitivity is automatically adjusted by the camera.
(Default value: sensitivity 125-1600)
The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected
by noise.
Use the four-way controller (23) to select [Sensitivity] on the
[A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to change the sensitivity.
Press the 4 button.
The setting is saved.
100
• The sensitivity cannot be selected in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.220) for details.
• When the shooting mode is set to
(Report), the AUTO is fixed at 1256400. Other sensitivities can also be selected.
• When [Pixel Track SR] is set to O (On), 3200/6400 cannot be selected.
• When the sensitivity is set to 125 and Highlight Correction is set to O (On),
the setting changes to 250 (200 cannot be selected).The setting returns
when Highlight Correction is set to P (Off).
Saving the Sensitivity setting 1p.120
Setting AUTO ISO Range
1
2
3
4
Use the four-way controller (23) to select [AUTO ISO Range]
on the [A Rec. Mode] menu.
Taking Pictures
Set the sensitivity range when the sensitivity is set to AUTO.
The sensitivity can be set to 125-200, 125-400, 125-800, 125-1600, 125-3200, 1256400.
3
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select the sensitivity
adjustment range.
Press the 4 button.
The setting is saved.
• AUTO ISO Range cannot be selected in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.220) for details.
• When [Pixel Track SR] is set to O (On), 125-3200 and 125-6400 cannot be
selected.
Setting the Exposure (EV Compensation)
For adjusting the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
1
Use the four-way controller (23) to select [EV
Compensation] on the [A Rec. Mode] menu.
101
2
Use the four-way controller (45) to select the EV value.
To brighten, select a positive (+) value. To darken, select a negative (–) value.
You can choose the EV setting in the range of –2.0 EV to +2.0 EV in 1/3 EV
steps.
• When a histogram is displayed in Still Picture Capture Mode or playback
mode, you can check whether the exposure is correct (p.31).
• EV Compensation cannot be used in some shooting modes. Refer to
“Functions Available for Each Shooting Mode” (p.220) for details.
Saving the EV Compensation setting 1p.120
3
Taking Pictures
Correcting the Brightness (D-Range Setting)
Expands the dynamic range and prevents bright and dark areas from occurring.
[Highlight Correction] adjusts the bright areas when the image is too bright and
[Shadow Correction] adjusts the dark areas when the image is too dark.
1
2
3
Use the four-way controller (23) to select [D-Range Setting]
on the [A Rec. Mode] menu.
Press the four-way controller (5).
The [D-Range Setting] screen appears.
Use the four-way controller (23)
to select [Highlight Correction] or
[Shadow Correction].
D-Range Setting
Highlight Correction
Shadow Correction
MENU
4
Use the four-way controller (45)
to select O (On) or P (Off).
P
The D-Range Setting icon appears on the
display.
P
Q
O
102
When [Highlight Correction] is set
to O
When [Shadow Correction] is set to
O
When [Highlight Correction] and
[Shadow Correction] are set to O
38
• When the Sensitivity is set to 125 or 200 and Highlight Correction is set to
O (On), the setting changes to 250. The setting returns when Highlight
Correction is set to P (Off).
• If you change the [Highlight Correction] or [Shadow Correction] setting
frequently, you can save time by assigning it to the Green button (p.105).
D-Range setting cannot be set in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
Setting Pixel Track SR
Shake Reduction settings in C (Movie) and
are configured under Movie SR (p.116).
1
2
(Underwater Movie) mode
Use the four-way controller (23) to select [Pixel Track SR] on
the [A Rec. Mode] menu.
3
Taking Pictures
You can set this function to correct for camera shake when taking still shots. If
Pixel Track SR is set to O (On), the camera automatically corrects for camera
shake in the images you shot. The default setting is P (Off).
Use the four-way controller (45) to switch between O (On)
or P (Off).
O(On)
Automatically corrects for camera shake.
P (Off)
No correction for camera shake.
The setting is saved.
• Pixel Track SR cannot be set in some shooting modes. Refer to “Functions
Available for Each Shooting Mode” (p.220) for details.
• Pixel Track SR does not function when the flash discharges even if [Pixel
Track SR] is set to O (On).
Pixel Track SR may not be effective when the shutter speed is slow. We
recommend you turn off the [Pixel Track SR] setting P (off) and use a tripod
for slow shutter speeds.
103
Setting Blink Detection
This specifies whether Blink Detection works when you use the Face Detection
function. The default setting is O (On).
1
2
Use the four-way controller (23) to select [Blink Detection]
on the [A Rec. Mode] menu.
Use the four-way controller (45) to switch between O (On) or
P (Off).
O(On)
Blink Detection function works.
P (Off)
Blink Detection function does not work.
The setting is saved.
3
Taking Pictures
Blink Detection 1p.63
If the Blink Detection function detected closed eyes when shooting, [Closed
eyes have been detected] is displayed for 3 seconds during Instant Review.
Setting the Instant Review
Use this setting to specify whether or not an Instant Review is displayed
immediately after images are shot. The default setting is O (On: displays the
image).
1
2
Use the four-way controller (23) to select [Instant Review]
on the [A Rec. Mode] menu.
Use the four-way controller (45) to switch between O (On)
or P (Off).
O(On)
Instant Review is displayed.
P (Off)
Instant Review is not displayed.
The setting is saved.
Instant Review 1p.63
104
Setting the Green Button
You can assign one of the following functions to the Green button: [Green Mode]
(p.73), [Voice Recording] (p.168), [Movie] (p.113) or [Fn Setting] (p.106). You can
activate the assigned function by just pressing the Green button.
When the shooting mode is set to 9 (Green) mode, [Green Button] settings
cannot be configured on the [A Rec. Mode] menu. To configure the settings,
first switch to a mode other than 9.
3
Assigning a Function
2
3
Use the four-way controller (23) to select [Green Button] on
the [A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to select a function you want to
assign.
Green Button
Green Mode
Voice Recording
Movie
Fn Setting
MENU
4
Taking Pictures
1
Cancel
OK
OK
Press the 4 button.
The setting is saved.
• [Green Mode] is registered as the default setting.
• If you select [Movie] for both [Fn Setting] and capture mode, the Green
button does not function because the modes are the same.
105
Registering Frequently Used Functions (Fn Setting)
You can register frequently used functions on the four-way controller. Using this
function, you can directly set the functions by pressing the four-way controller
without displaying the menu in capture mode.
In [Fn Setting], Still Picture Capture Mode and C (Movie) mode have different
settings. To execute [Fn Setting] in C mode, press the MENU button in C mode
in step 1 on page p.105.
3
Use the four-way controller (23)
to select [Fn Setting].
3
Green Button
Taking Pictures
+
+
+
+
MENU
4
5
Green Mode
Voice Recording
Movie
Recorded
Fn SettingPixels
Quality Level
WBWhite Balance
Cancel
OK
OK
OK
OK
Press the 4 button.
The [Fn Setting] screen appears.
Use the four-way controller (23)
to select a key you want to assign
a function to.
Green Button
Fn Setting
+
+
+
+
EV Compensation
Recorded Pixels
Quality Level
WB White Balance
MENU
6
7
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to select the function you want to
register.
Green Button
+
+
+
+
MENU
8
EV Compensation
Recorded Pixels
Quality Level
WB White Balance
ISO Sensitivity
AF Focusing Area
Cancel
Press the 4 button.
The setting is saved.
This function is activated only when you assign the [Fn Setting] to the Green
button.
106
You can assign only one function to each key.
The default settings for Fn settings
Default setting
Still Picture Capture Mode
(2) EV Compensation
(3) Recorded Pixels
(4) Quality Level
(5) White Balance
Movie mode
(2) Movie SR
(3) EV Compensation
(4) Recorded Pixels
(5) White Balance
3
Selectable
items
Still Picture Capture Mode
EV Compensation
Recorded Pixels
Quality Level
White Balance
Sensitivity
Focusing Area
Auto Macro
AE Metering
Highlight Correction
Shadow Correction
Sharpness
Saturation (Tone Adjustment) *
Contrast
Movie mode
Recorded Pixels
Movie SR
White Balance
Focusing Area
EV Compensation
Sharpness
Saturation (Tone Adjustment) *
Contrast
Taking Pictures
Functions that can be assigned to each key
* The items displayed change depending on the [Image Tone] selected on the
[A Rec. Mode] menu. When you have selected either [Bright] or [Natural],
[Saturation] is displayed, and when [Monochrome] is selected, [Tone
Adjustment] is displayed.
Changing Assigned Items
Press the Green button in shooting mode to display the Fn Setting screen. Select
an item with the four-way controller (2345), and press either the (23) or
(45) four-way controller to change the settings.
107
Setting the Image Sharpness (Sharpness)
You can give the image sharp or soft outlines.
1
2
Use the four-way controller (23) to select [Sharpness] on the
[A Rec. Mode] menu.
Use the four-way controller (45) to change the sharpness
level.
F
G
H
3
Soft
Normal
Sharp
Taking Pictures
Setting the Saturation/Tone Adjustment
You can set either color brightness (Saturation) or the tone of monochrome
images (Tone Adjustment).
The items displayed change depending on the [Image Tone] selected on the
[A Rec. Mode] menu.
Selected Image Tone
Bright, Natural
Monochrome
1
2
Use the four-way controller (23) to select [Saturation (Tone
Adjustment)] on the [A Rec. Mode] menu.
Use the four-way controller (45) to select the level of
saturation (or Tone Adjustment).
F
G
H
108
Displayed item
Saturation
Tone Adjustment
Low
Normal
High
(Blue for Tone Adjustment)
(B&W for Tone Adjustment)
(Sepia for Tone Adjustment)
Setting the Image Contrast (Contrast)
For setting the image contrast level.
1
2
Use the four-way controller (23) to select [Contrast] on the
[A Rec. Mode] menu.
Use the four-way controller (45) to change the contrast
level.
F
G
H
Low
Normal
High
You can choose whether to imprint the date and/or time when taking still pictures.
1
2
3
4
Use the four-way controller (23) to select [Date Imprint] on
the [A Rec. Mode] menu.
Taking Pictures
Setting the Date Imprint Function
3
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select the Date Imprint
details.
Choose from [Date], [Date & Time], [Time] or [Off].
Press the 4 button.
The setting is saved.
• The date and/or time imprinted with the [Date Imprint] function cannot be
deleted.
• Note that if the printer or the image editing software is set to print the date
and the images to be printed already have the date and/or time imprinted,
the imprinted dates and/or times may overlap.
• O appears on the display in A mode when [Date Imprint] is set to any
setting other than [Off].
• The date and/or time are imprinted on the picture with the display format
set in the [Date Adjustment] screen (p.46).
109
Setting the IQ Enhancer Processing
You can take pictures with clearer details by using image processing with IQ
enhancer technique.
1
2
Use the four-way controller (23) to select [IQ Enhancer] on
the [A Rec. Mode] menu.
Use the four-way controller (45) to select O (On)/P (Off).
O (On)
IQ enhancer function works
P (Off)
IQ enhancer function does not work
The setting is saved.
3
Taking Pictures
IQ enhancer does not function in the following situation:
When the drive mode is set to c (Burst Shooting)
Setting the Macro Light
Set whether or not to turn on the LED Macro Lights around the lens.
The LED Macro Lights turn on when the [Macro Light] is set to O (On).
The default setting is P (Off).
1
2
Use the four-way controller (23) to select [Macro Light] on
the [A Rec. Mode] menu.
Use the four-way controller (45) to select O (On)/P (Off).
O (On)
Turns on the LED Macro Lights
P (Off)
Turns off the LED Macro Lights
The setting is saved.
• In
(Digital Microscope) mode, the LED Macro Lights turn on regardless
of whether the setting is turned on or off.
• If the Power Saving is set to on, the light turns off after the set time.
• The LED Macro Lights turn off during playback and when using the USB
connector except when outputting video in
mode.
• Self-portrait Assist and Self-portrait Assist + Smile Capture cannot be
selected when [Macro Light] is set to O (On).
If you take a picture using self-timer (g, Z) or remote control (h, i) while
[Macro Light] is set to O (On), the LED Macro Lights remain on regardless of
the countdown.
110
Taking Pictures Underwater
Taking Underwater Pictures (Underwater Mode/
Underwater Movie Mode)
This camera complies with JIS waterproof grade 8 and can be used to take
pictures at a depth of 12 m continuously for 2 hours. In addition, this camera
complies with JIS dustproof grade 6 (IP68).
Use the Underwater mode to take underwater still pictures that capture the
blueness of the sea.
Use the Underwater Movie mode to record movies underwater.
2
3
Use the four-way controller (2345) to select
(Underwater)/
(Underwater Movie) from the Capture Mode
Palette.
Press the 4 button.
The shooting mode is selected and the camera returns to capture mode.
Taking Pictures
1
3
Press the shutter release button to take a picture.
If you selected
, the picture is taken.
If you selected
, recording starts. You can continue recording until the
recorded movie time reaches 25 minutes. To stop recording, press the shutter
release button fully. Perform the same steps as C (Movie) mode to record
movies.
Recording Movies 1p.113
• Before taking pictures underwater, make sure that there is no dirt or sand
on the waterproof seal of the battery/card and terminal covers and check
that the covers are securely locked.
• Before opening the battery/card and terminal covers after using the camera
underwater, make sure that there is no water, dirt, or sand on the covers or
anywhere else on the camera. Wipe the camera before opening the covers.
• When shooting in
(Underwater Movie) mode, use SD Speed Class 4
or higher cards.
Regarding Waterproof, Dustproof, and Shockproof Design 1p.8
• When the Focus Mode is set to \, you can adjust the focus before
recording starts and during recording.
• Optical and digital zoom can be used in
mode before recording starts.
Digital zoom can also be used during recording.
111
Although the camera is designed to be waterproof and dustproof, avoid using
the camera under the following conditions. It may momentarily be subjected
to water pressure beyond that covered in the guarantee and water may enter
the interior of the camera.
• Jumping into the water while holding the camera
• Swimming while holding the camera in your hand
• Using the camera in environments where water is applied forcefully, such
as strong river currents and waterfalls
3
Taking Pictures
112
Recording Movies
Recording Movies
This mode enables you to record movies. Sound is recorded at the same time.
Shutter release button
W/T button
1
2
Use the four-way controller (2345) to select C (Movie)
from the Capture Mode Palette.
Press the 4 button.
3
Taking Pictures
Four-way controller
4 button
1
C (Movie) mode is selected and the
camera returns to capture mode.
The following information appears on the
display.
1
2
3
4
Movie mode icon
Movie Shake Reduction icon
REC
07:34
Remaining recordable time
REC indicator (blinks during
3
2
4
recording)
5 Focus frame (does not appear during recording)
3
5
You can change the captured area by pressing the W/T button.
T
Enlarges the subject
W
Widens the area that is captured by the camera
Press the shutter release button fully.
Recording starts. You can continue recording until the recorded movie time
reaches 25 minutes.
113
4
Press the shutter release button fully.
Recording stops.
Playing Back a Movie 1p.123
3
Taking Pictures
• The focus mode can be changed before recording starts.
• When the focus mode is set to \(Manual Focus), you can adjust the
focus before recording starts.
• Optical and digital zoom can be used before recording starts. Digital zoom
is available during recording when digital zoom (p.65) is set to O (On).
• When the shooting mode is set to C (Movie), Face Detection is
automatically set to on. You can select Smile Capture or Face Detection Off
by pressing the I button before starting recording a movie (p.69). When
Smile Capture function is activated, movie recording starts automatically
when the camera recognizes the subject’s smile. However, depending on
the condition of the recognized faces, movie recording may not start
automatically because the Smile Capture function may not work. If this
happens, press the shutter release button to start movie recording.
• You can record a movie using the remote control unit (optional) (p.83).
• When you change the display by pressing the 4/W button while
recording a movie, the histogram is not displayed.
• When you use the SD Memory Card, use SD Speed Class 4 or higher
cards.
Keeping the Shutter Release Button Pressed
If you keep the shutter release button pressed for more than one second,
recording will continue as long as you keep the button pressed. Shooting stops
when you take your finger off the shutter release button.
114
Selecting the Number of Recorded Pixels and
Frame Rate for Movies
You can choose the number of recorded pixels and frame rate settings for movies.
The more pixels there are, the clearer the details and the bigger the file size. The
more frames per second, the better the quality of the movie, but the file size
becomes larger.
Recorded
Pixels
Frame
Rate
1920x1080
30 fps
Records images in full HDTV format (16:9).
Movement is recorded smoothly.
1280x720
60 fps
Records images in HDTV format (16:9). Quick
movement is recorded smoothly.
M
1280×720
30 fps
Records images in HDTV format (16:9). Movement
is recorded smoothly. (default setting)
G
640×480
30 fps
Suitable for viewing on a TV or computer screen.
Movement is recorded smoothly.
Setting
Use
3
1
2
3
Use the four-way controller (23) to select [Recorded Pixels]
on the [C Movie] menu.
Pressing the 3 button in C (Movie) or
display the [C Movie] menu.
(Underwater Movie) modes
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to change the number of
recorded pixels and frame rate.
Rec. Time
02:26
Recorded Pixels
Mov i e SR
MENU
4
Taking Pictures
* The frame rate (fps) indicates the number of frames per second.
Cancel
OK
OK
Press the 4 button.
The setting is saved.
The following restrictions may cause the selected recordable time and the
actual recordable time to be different.
• The maximum recordable time of a file is limited to 25 minutes.
115
Setting the Movie SR (Movie Shake Reduction)
Function
In C (Movie)/
( Underwater Movie) modes, you can compensate for camera
shake while you are recording a movie with the Movie SR (Movie Shake Reduction)
function.
1
3
Taking Pictures
2
Use the four-way controller (23) to select [Movie SR] on the
[C Movie] menu.
Pressing the 3 button in C (Movie) or
display the [C Movie] menu.
Use the four-way controller (45)
to select O (On) or P (Off).
Automatically corrects for
camera shake.
P (Off)
No correction for camera
shake.
The setting is saved.
O(On)
(Underwater Movie) modes
Movie
Recorded Pixels
Mov i e SR
MENU
Exit
Recording a Movie from Pictures Taken at a Set
Interval (Interval Movie)
In this mode, you can record multiple still pictures taken automatically at a set
interval from a set time, as a movie file.
Interval
You can set this to 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the total time, from 10 minutes to 359 hours. The total time and the
Total Time settable units change depending on the interval set. The Interval can be set
in increments of 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the start delay, from 0 minutes to 24 hours. You can set 1 minute
increments for the first 59 minutes and 1 hour increments from there. If
Start Delay
the start time is set to 0 minutes, the first picture is taken as soon as the
shutter release button is pressed.
116
1
2
3
4
Use the four-way controller (2345) to select
Movie) from the Capture Mode Palette.
Press the 4 button.
The current Interval Movie setting appears for approximately one minute. To
take pictures with the current settings, go to step 10.
Press the 4 button while the settings are displayed.
The Interval Movie setting screen appears. [Interval] is marked with the frame.
Set the interval.
1 Press the four-way controller (5).
2 Use the four-way controller (23)
to set the interval, then press the
4 button.
6
Interval Shot
3
Interval
1min.
Total Time
0hr. 10 min.
Start Delay
0hr.
0 min.
MENU
The frame returns to [Interval].
Press the four-way controller (3).
The frame moves to [Total Time].
Taking Pictures
A pull-down menu appears.
5
(Interval
Set the total time.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
7
8
The frame returns to [Total Time].
Press the four-way controller (3).
The frame moves to [Start Delay].
Set the start delay.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set the hours, then press
the four-way controller (5).
3 Use the four-way controller (23) to set the minutes, then press
the four-way controller (5).
9
The frame returns to [Start Delay].
Press the 3 button.
The Interval movie setting is saved and the camera returns to capture mode.
117
10
Press the shutter release button to take a picture.
Interval movie recording starts.
The LCD turns off between shots (during standby). Press the power switch
during standby to display the remaining time and interval on the monitor.
The [Stop interval shooting?] message is displayed when the power switch and
then the 3 button are pressed during standby. Pressing the 4 button
cancels interval movie.
3
Taking Pictures
• Confirm that the battery is sufficiently charged before starting interval
movie recording. If the battery is not sufficiently charged, it may become
depleted during interval movie recording and cause recording of the movie
to stop.
• When performing interval movie recording, the settings are fixed as follows;
Recorded Pixels:
, Frame Rate: 30fps, Quality Level: C, Movie SR:
P (Off), and Flash Mode: a.
• Interval shot stops if the SD Memory Card is removed or inserted during
standby.
• Sound cannot be recorded in
mode.
• When you use the SD Memory Card, use SD Speed Class 4 or higher
cards.
• If you set a start delay, a start time corresponding to the current time and
the start delay you set is displayed in real time.
• The total time you can set differs according to the shooting interval you set,
as indicated in the table below.
Interval
1 min
5 min
10 min
30 min
1 hr
Total time that can be set
30 fps
10 minutes to 5 hours and 59 minutes
(in increments of 1 minute)
30 minutes to 29 hours and 55 minutes
(in increments of 5 minutes)
1 hour to 59 hours and 50 minutes
(in increments of 10 minutes)
3 hours to 179 hours and 30 minutes
(in increments of 30 minutes)
6 hours to 359 hours
(in increments of 1 hour)
• The Date Imprint function (p.109) can be selected for Interval Movie mode.
118
Using the High Speed Movie Function
The camera records a high speed movie for slow motion playback.
1
2
Use the four-way controller (2345) to select
Speed Movie) from the Capture Mode Palette.
(High
Press the 4 button.
The camera returns to capture mode.
3
3
4
Press the shutter release button fully.
Recording starts. You can continue recording until the built-in memory or the SD
Memory Card is full, or the recorded movie time reaches 15 seconds.
Press the shutter release button fully.
•
•
•
•
The recorded pixels is fixed to 640 x 480.
The flash does not discharge in this mode.
The Face Detection function and the Movie SR are fixed to off.
When you use the SD Memory Card, use SD Speed Class 4 or higher
cards.
Taking Pictures
REC
00:15
119
Saving the Settings (Memory)
3
Taking Pictures
120
The Memory function is for saving the current camera settings when the camera
is turned off.
For some camera settings, the Memory function is always set to O (On) (the settings
are saved when the camera is turned off), while for others you can choose on or off
(to choose whether the settings are saved or not when the camera is turned off). The
items which can be set to O or P (Off) in the Memory function are shown in the table
below. (Items not listed here are always saved in the selected settings when the
camera is turned off.)
If you select O, the settings will be saved in the status they were in immediately before the
camera was turned off. If you select P, the settings will be reset to the defaults when the
camera is turned off. The table below also shows whether the Memory default setting for
each item is O or P.
Item
Description
A Face Detection mode set by using the I
button.
The flash mode set with the four-way
Flash Mode
controller (4)
The drive mode set with the four-way
Drive Mode
controller (2)
The focus mode set with the four-way
Focus Mode
controller (5)
Zoom Position
The zoom position set with the W/T button.
The manual focus position set with the fourMF Position
way controller (23)
The [White Balance] setting on the
White Balance
[A Rec. Mode] menu
The [Sensitivity] setting on the
Sensitivity
[A Rec. Mode] menu
The [EV Compensation] setting on the
EV Compensation
[A Rec. Mode] menu
The [AE Metering] setting on the
AE Metering
[A Rec. Mode] menu
The [Digital Zoom] setting on the
Digital Zoom
[A Rec. Mode] menu
The information display mode set with the
DISPLAY
4/W button
If a new SD Memory Card is inserted when
File No.
set to O (On), file numbers are assigned
sequentially.
Face Detection
Default
setting
Page
P
p.69
O
p.90
P
p.81 p.84
P
p.91
P
p.63
P
p.92
P
p.98
P
p.100
P
p.101
P
p.99
O
p.65
P
p.25
O
⎯
1
2
3
Use the four-way controller (23) to select [Memory] on the
[A Rec. Mode] menu.
Press the four-way controller (5).
The [Memory] screen appears.
Use the four-way controller (23)
to choose an item.
Memory
1/3
Face Detection
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
MENU
Use the four-way controller (45) to select O (On) or P (Off).
Taking Pictures
4
3
121
Playing Back Images
4Playing Back and
Deleting Images
Playing Back Still Pictures
Q button
Four-way controller
4 button
i button
4
Playing Back and Deleting Images
1
Press the Q button after taking a
picture.
File number
100 - 0038
The camera enters Q mode and the image
appears on the display. Displaying one
image in full in Q mode (Q mode default
setting) is called single-image display.
Edit
02/02/'12 14:25
To Play Back the Previous or Next Image
2
Press the four-way controller (45).
The previous or next image appears.
To Delete the Displayed Image
Press the i button while the image is
displayed to display the Delete screen. Press
the four-way controller (2) to select [Delete]
and press the 4 button.
100 - 0017
Delete
Cancel
OK
For information on other deletion procedures 1p.135
122
OK
Playing Back a Movie
You can play back the movies you have taken. The sound is played back at the
same time.
1
2
Enter Q mode and use the four-way controller (45) to
choose the movie you want to play back.
Press the four-way controller
(2).
100 - 0017
000 : 30
Playback starts.
Edit
02/02/'12 14:25
The following operations can be performed while playback is
paused.
Four-way controller (4)
Reverses the frame(*)
Four-way controller (5)
Forwards the frame
Four-way controller (2)
Resumes playback
3
(*)Every 30 frame is the first frame for reversing frame. For example, when you
reverse frame at 1 to 31, the frame reverses to the first frame and when you
reverse frame at 32 to 61, the frame reverses to the 31st frame.
Press the four-way controller (3).
4
Playing Back and Deleting Images
The following operations can be performed during playback.
Four-way controller (2)
Pauses playback
Zoom button right (y)
Increases the volume
Zoom button left (f)
Reduces the volume
Press and hold the four-way controller (5) Fast-forwards playback
Press and hold the four-way controller (4) Fast-reverses playback
Playback stops.
Only movies taken with this camera can be played back. Movies taken with
other cameras cannot be played back.
123
Multi-Image Display
6-Image Display/12-Image Display
You can display 6 or 12 thumbnails of captured images at a time.
1
Press the f button in Q mode.
The 6-image display appears showing a page consisting of 6 thumbnail images.
Pressing the f button again changes it to a 12-image display.
4
Playing Back and Deleting Images
124
A page consisting of 6 or 12 thumbnail
images appears. The displayed images
1
change 6- or 12-images at a time page by
page.
2
Use the four-way controller (2345) to
move the frame. If there are too many
100-0010
Select & Delete
images to fit on one page, pressing the fourway controller (24) while image 1 is
6-Image Display
selected will display the previous page.
Folder divider icon
Similarly, if you choose image 2 and press
Frame
the four-way controller (35), the next page
appears.
1
♦ indicates that the previous or next screen
is stored in a separate folder.
ٟ
2
Select & Delete
12-Image Display
100-0010
The icons that appear on the images indicate the following:
(No icon)
O (With image)
C
(With image)
O (Without image)
Still picture without sound
Still picture with sound
Movie (the first frame appears)
High Speed Movie (the first frame appears)
Sound files only
Press the 4 button to switch to single-image display of the selected image.
Press the Q button to switch to A mode.
Folder Display/Calendar Display
Press the f button in 12-image display to switch to folder or calendar display.
Press the Green button to switch between folder display and calendar display.
2
Press the f button twice in Q mode.
The screen changes to 12-image display.
Press the f button.
The screen changes to folder display or calendar display.
Folder display
The list of folders with recorded images and
sound files appears.
Use the four-way controller (2345) to
move the frame.
If you select a folder and press the y
button or the 4 button, images in the
folder are displayed in 12-image display.
Frame
101
102
105
106
103
104
101_0707
Playing Back and Deleting Images
1
4
125
Calendar display
Recorded images and sound files are
Frame
displayed by date in calendar format.
SUN
MON
TUE
WED
THU
FRI
SAT
The first image recorded on a date is
1
2
3
displayed for that date on the calendar.
4
5
6
7
8
9
10
O appears for dates on which the first
15
16
17
11
12
13
14
recorded file was either sound-only data or
18
19
20
21
22
23
24
25
26
27
28
29
30
31
a still picture with a voice memo.
Use the four-way controller (2345) to
2012
move the frame.
If you select a date and press the y button, images taken on that date are
displayed in 12-image display.
Select a date and press the 4 button to switch to single-image display of the
first image recorded on that date.
• Press the 3 button in folder display or calendar display to switch to
12-image display.
• Press the Q button or half-press the shutter release button in folder
display or calendar display to switch to A mode.
4
Playing Back and Deleting Images
Using the Playback Function
1
2
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
Use the four-way controller
(2345) to choose an icon.
The guide for the selected function appears
below.
For continuously playing
back images. Screen or
sound effects can be set
MENU Cancel
3
Press the 4 button.
The playback function is recalled.
126
1/2
Slideshow
OK
OK
100 - 0038
100 - 0038100 - 0038
1 0 / 0 2'02/02/'12
/1002/ 014:25
124/ 0: 22'02/02/'12
5114:25
14:25
104/ 0: 2 5/ 0 2 14:25
Edit '02/02/'12
Edit Edit
MENU
Image Rotation
1/2
Slideshow
For continuously playing
back images. Screen or
sound effects can be set
Cancel
OK
OK
MENU
38
3 8 ' 1 0 / 0 2' /1002/ 0124/ 0: 22'51104/ 0: 2 5/ 0 2 1 4 : 2 5
Closes the Playback Mode
Palette and goes to A mode.
OK
Cancel
SHUTTERSHUTTER halfway
Press
or
38
4
Rotates captured images.
Useful when viewing
vertical images on a TV
OK
OK
MENU
Cancel
OK
OK
Goes to the screen for
selected playback function.
Playing Back and Deleting Images
MENU
1/2
• When the frame is placed over an icon on the Playback Mode Palette, a
guide for that function appears.
• You can turn the guide display off for the function on the Playback Mode
Palette (p.191).
127
Playback Mode Palette
Playback Mode
u Slideshow
s Image Rotation
k Small Face Filter
Ink Rubbing Filter
Collage
P Digital Filter
HDR Filter
4
Playing Back and Deleting Images
128
E Original Frame
N Frame Composite
Save as
Still image
Movie Divide
[ Editing Movies
Adding
title picture
Red-eye
Z Compensation
Description
For continuously playing back images. Screen or
sound effects can be set
Rotates captured images. Useful when viewing
vertical images on a TV
Reduces the size of faces in the image, for wellproportioned portraits
Creates an image similar to ink rubbing from
original pictures
Creates a collage print page from saved image files
For modifying images with a Color filter or Soft filter
Processes single image to simulate HDR effect
Available to make from the kind and color of a
frame. Available to enter text
For composing an image with a frame. Select
Overwrite or Save as to save
Page
p.129
p.131
p.145
p.148
p.149
p.146
p.148
p.156
p.153
For saving one frame from a movie as a still picture
For dividing a movie into two
p.160
For adding a title picture to your movie
For compensating red-eye. May not work due to
the condition of the image
Changes Recorded Pixels and Quality Level to
n Resize
make the file size smaller
For cropping images to the size you like. Saved as
o Cropping
a new image
For copying images and sounds between the builtin
p Image/Sound Copy memory and SD memory card
Attaches sound to images. Recording is possible till
\ Voice Memo
the memory card is full
Protects images and sounds from accidental
Protect
Z
deletion. Formatting will delete
For the print settings. Useful when printing at a
r DPOF
printing service
For setting a captured image as the Start-up
^ Start-up Screen
Screen
p.152
p.143
p.144
p.163
p.171
p.138
p.165
p.193
Slideshow
You can play back recorded still pictures and movies one after another.
1
2
3
4
Enter Q mode and use the four-way controller (45) to
choose the image to start the slideshow with.
Use the four-way controller (2345) to select
u (Slideshow) from the Playback Mode Palette.
Press the 4 button.
The slideshow setting screen appears.
Use the four-way controller (23)
to select [Start].
Slideshow starts
4
Start
3sec.
Wipe
MENU
5
6
OK
OK
Press the 4 button.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow. To resume
the slideshow, press the 4 button again.
Press any button other than the 4 button.
The slideshow stops.
To Set the Slideshow Conditions
You can set the playback interval and also a screen effect and sound effect for
when one image changes to the next.
1
Use the four-way controller (23)
to select [Interval] in step 4 on
p.129.
Playing Back and Deleting Images
Interval
Screen Effect
Sound Effect
Start
Interval
Screen Effect
Sound Effect
3sec.
Wipe
MENU
2
Press the four-way controller (5).
A pull-down menu appears.
129
3
4
Use the four-way controller (23) to change the interval and
press the 4 button.
Choose from [3sec.], [5sec.], [10sec.], [20sec.] or [30sec.].
Use the four-way controller (23) to select [Screen Effect].
After selecting [Screen Effect], press the four-way controller (5). A pull-down
menu appears with the following items. Use the four-way controller (23) to
select an item and press the 4 button.
Wipe
Checker
Fade
Random
Off
4
Playing Back and Deleting Images
5
6
7
8
The next image slides over the previous one from left to right
The next image appears in small square mosaic blocks
The current image gradually fades out and the next image
fades in
Various effects are used randomly
No effect
Use the four-way controller (23) to select [Sound Effect].
Use the four-way controller (45) to select O (On) or P (Off).
Except when the [Screen Effect] is set to [Off], you can choose O (On) or P (Off)
for the sound that is played when one image changes to the next.
Use the four-way controller (23) to select [Start].
Press the 4 button.
The slideshow starts using the selected interval and effect.
• The slideshow will continue until you press any button other than the 4
button.
• Movies or pictures with sound will be played through to the end before the
next picture is played back, regardless of the interval setting. However,
pressing the four-way controller (5) while playing back a movie or a picture
with sound skips to the next image.
• Sound files made in O (Voice Recording) are not played back in the
slideshow.
• Images taken at F (Digital Panorama) are displayed by scrolling from left
to right in 4 seconds before the next picture is played back, regardless of
the Interval or Screen Effect setting.
• When [Random] is selected for the screen effect, the interval is fixed and
the sound effect is set to off. Also the sound of pictures with sound will not
be played back.
Connecting the Camera to AV Equipment 1p.140
130
Rotating the Image
1
2
3
Press the Q button after taking a picture.
The image appears on the display.
Use the four-way controller (2345) to select s (Image
Rotation) from the Playback Mode Palette.
Press the 4 button.
The rotation selection screen (0°, Right 90°, Left 90°, or 180°) appears.
4
Use the four-way controller
(2345) to choose the rotation
direction and press the 4
button.
4
MENU
Cancel
OK
OK
• Images taken at F (Digital Panorama) and movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a rotated
state.
Playing Back and Deleting Images
The rotated image is saved.
131
Zoom Playback
You can magnify an image up to ten times.
1
2
Press the y button.
The image is magnified (×1.1 to ×10). Holding down the y button continuously
magnifies the image.
With [Quick Zoom] (p.191) set to O (On), pressing y button once magnifies
the image to 10×.
You can use the + mark of the guide at the
bottom left of the screen to check which
portion of the image is magnified.
4
Playing Back and Deleting Images
132
Enter Q mode and use the four-way controller (45) to
choose the image you want to magnify.
The following operations can be
performed while an image is
magnified.
Guide
Four-way controller (2345) Moves the position to be magnified
Zoom button right (y)
Makes the image bigger (max. of 10×)
Zoom button left (f)
Makes the image smaller (min. of 1.1×)
3
Press the 4 button.
The image returns to single-image display.
Movies cannot be magnified.
Zoom In on the Subject’s Face Automatically
(Face Close-up Playback)
You can enjoy playing back images with the subject’s faces zoomed up simply by
pressing the I button (Face close-up playback) if the Face Detection function
activated when the images were taken.
1
2
Enter Q mode and use the four-way controller (45) to
choose the image you want to magnify.
Confirm that the I icon is displayed in the image and press
the I button.
The image is magnified around the face first
recognized when the image was taken.
1/2
4
2/2
The following operations can be performed during Face close-up
playback mode.
Zoom button right (y)
Zoom button left (f)
3
Zooms up on the subject being displayed for
Face close-up playback at an equal or slightly
larger magnification ratio.
Zooms up on the subject being displayed for
Face close-up playback at an equal or slightly
smaller magnification ratio.
Playing Back and Deleting Images
If multiple faces were recognized when the
image was taken, the subject’s faces are
zoomed up on each time the I button is
pressed in order of the recognition during
shooting.
Press the 4 button.
The image returns to single-image display.
133
• Face close-up playback is not available for movies or images that are
saved as still pictures from the movies.
• The magnification ratio for Face close-up playback may differ depending on
the conditions such as the size of the face recognized when shooting.
• Face close-up playback is also available for pet’s faces taken at e (Pet)
mode.
4
Playing Back and Deleting Images
134
Deleting Images and Sound Files
Delete images and sound files that you do not want to keep.
Deleting a Single Image/Sound File
You can delete a single image or sound file.
If sound (voice memo) has been recorded with an image (p.171), you can delete
the sound without deleting the image.
Protected images and sound files cannot be deleted (p.138).
1
3
4
U appears on the images with sound.
Press the i button.
A confirmation screen appears.
Use the four-way controller (2) to
select [Delete].
100 - 0017
Delete
Cancel
OK
Select [Delete Sound] to delete sound
without deleting the image.
OK
100 - 0038
Delete Sound
Delete
Cancel
OK
4
Playing Back and Deleting Images
2
Enter Q mode and use the four-way controller (45) to
choose the image/sound file you want to delete.
OK
Press the 4 button.
The image is deleted.
You cannot delete only the sound in a movie.
135
Deleting Selected Images and Sound Files
You can delete several images/sound files selected from the 6- or 12-image
display at once.
Protected images and sound files cannot be deleted (p.138).
1
2
Press the f button once or twice in Q mode.
6-image display or 12-image display appears.
Press the i button.
P appears on the images and sound files.
4
Playing Back and Deleting Images
MENU Cancel
3
4
5
6
OK
Use the four-way controller
(2345) to choose the images
and sound files that you want to
delete and press the 4 button.
O appears on the selected images and
sound files.
MENU Cancel
OK
Delete
Pressing and holding the y button displays
the selected image in single-image display and you can check whether to delete
the image. Releasing the button returns to 6- or 12-image display. However,
protected images cannot be displayed in single-image display.
Press the i button.
A confirmation screen appears.
Use the four-way controller (2) to select [Select & Delete].
Press the 4 button.
The selected images and sound files are deleted.
136
Delete
Deleting All Images and Sound Files
Deletes all the images and sound files at once.
Protected images and sound files cannot be deleted (p.138).
1
2
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller
(5) once.
Use the four-way controller (23)
to select [Delete All].
Setting
MENU Exit
3
4
5
Press the four-way controller (5).
A confirmation dialog appears.
Use the four-way controller (2) to select [Delete All].
Press the 4 button.
All the images and sound files are deleted.
4/4
4
Playing Back and Deleting Images
Delete All
Pixel Mapping
Startup Shortcut
Format
GPS
137
Protecting Images and Sound Files from Deletion
(Protect)
You can protect stored images and sound files from being accidentally deleted.
1
2
3
4
4
Enter Q mode and use the four-way controller (45) to
choose the image you want to protect.
Use the four-way controller (2345) to select Z (Protect)
from the Playback Mode Palette.
Press the 4 button.
The screen for selecting [Single Image/Sound] or [All Images/Sounds] appears.
Use the four-way controller (2) to
select [Single Image/Sound].
Playing Back and Deleting Images
Single Image/Sound
All Images/Sounds
Cancel
OK
5
6
Press the 4 button.
The message [Protects this image/sound] appears.
To protect another image or sound file, use the four-way controller (45) to
select another image or sound file.
Use the four-way controller (2) to
select [Protect].
100 - 0038
Protects this
image/sound
Protect
Unprotect
Cancel
OK
OK
7
Press the 4 button.
The selected image or sound file is protected.
To protect other images or sound files, repeat Steps 4 to 7.
Select [Cancel] to exit the Protect settings.
• To cancel the Protect setting, select [Unprotect] in step 6.
• Y appears on the protected images and sound files during playback.
138
OK
OK
To Protect All Images and Sound Files
1
Select [All Images/Sounds] in
step 4 on p.138.
Single Image/Sound
All Images/Sounds
Cancel
OK
2
3
OK
Press the 4 button.
Use the four-way controller (2) to
select [Protect].
Protects all
images/sounds
4
OK
4
5
OK
Press the 4 button.
All the images and sound files are protected and the screen shown in Step 1
reappears.
Use the four-way controller (23) to select [Cancel] and press
the 4 button.
The Playback Mode Palette reappears.
Protected images and sound files are deleted when the SD Memory Card or
the built-in memory is formatted (p.174).
To cancel the Protect setting on all your images and sound files, select
[Unprotect] in step 3.
Playing Back and Deleting Images
Protect
Unprotect
Cancel
OK
139
Connecting the Camera to AV
Equipment
You can connect the camera to a TV or other device with a video input terminal
or HDMl terminal and playback images.
4
Playing Back and Deleting Images
• The power lamp on the camera lights up during a connection.
• If you intend to use the camera continuously for a long period, use of the
AC adapter kit K-AC117 (optional) is recommended. (p.37)
• For AV device with multiple video input terminals, check the operating
manual of the AV device, and select the video input terminal to which the
camera is connected.
• You cannot output composite and HDMI video at the same time.
• The camera display turns off while the camera is connected to AV
equipment.
• You cannot adjust the volume on the camera when connected to an AV
device. Adjust the volume on the AV device.
• When the camera is connected to an AV device, you can change the
images with the remote control (optional).
Connecting the Camera to a Video Input Terminal
By using the optional AV cable (I-AVC7), you can capture and play back images
on device with a video input terminal, such as a TV.
External Input
Terminal
AUDIO
VIDEO (L)
(R)
PC/AV terminal
140
Yellow
White
1
2
3
4
5
Open the terminal cover.
Move the terminal cover lock lever in the direction shown by 1, slide the cover
in the direction shown by 2 and open the cover in the direction shown by 3.
Connect the AV cable to the PC/AV terminal.
Connect the other ends of the AV cable (yellow: video, white:
audio) to the video input terminal and audio input terminal of
the AV device.
When using stereo sound device, insert the sound terminal into the L (white)
terminal.
Turn the AV device on.
When the device that the camera is connected to and the device that plays back
images are different, turn both devices on.
When viewing images on AV device with multiple video input terminals (such as
a TV), refer to the operating manual of the device and select the video input
terminal to which to connect the camera.
Turn the camera on.
• Depending on the country or region, images and sound files may fail to be
played back if the video output format is set different from the one in use
there. If this happens, change the video output format setting (p.187).
• The camera’s AV output is output at normal resolution.
To watch movies shot at
,
or M at HDTV resolution, output the
movies as HDMI or transfer them to a computer (p.142).
Close the terminal cover securely when not using the terminal.
<How to close the terminal cover>
Close the cover in the opposite direction indicated by 3. While lightly
pressing on the terminal cover, slide it away from 2 until it clicks.
4
Playing Back and Deleting Images
6
Turn the AV device and camera off.
141
Connecting the Camera to an HDMI Terminal
Use a commercially available HDMI cable to connect the camera to a device with
an HDMI terminal.
HDMI
terminal
4
Playing Back and Deleting Images
1
2
3
4
5
Turn the AV device and camera off.
Open the terminal cover.
Move the terminal cover lock lever in the direction shown by 1, slide the cover
in the direction shown by 2 and open the cover in the direction shown by 3.
Connect the HDMI cable to the HDMI terminal.
Connect the other end of the HDMI cable to the HDMI terminal
on the AV device.
Turn the AV device and camera on.
The camera information is displayed on the screen of the connected AV device.
• The camera has a Type D (Micro) HDMI terminal. Use a commercially
available HDMI cable that matches your AV device.
• If you play back movies by connecting the camera to an AV device with a
commercially available HDMI cable, set the output format to “Selecting the
HDMI Output Format” (p.188).
Close the terminal cover securely when not using the terminal.
<How to close the terminal cover>
Close the cover in the opposite direction indicated by 3. While lightly
pressing on the terminal cover, slide it away from 2 until it clicks.
142
Editing Images
5Editing and Printing
Changing the Image Size (Resize)
By changing the recorded pixels and quality level of a selected image, you can
make the file size smaller than the original. You can use this function to continue
taking pictures when the SD Memory Card or the built-in memory is full, by making
the images smaller and overwriting the original images to make more space
available.
• Images taken with the recorded pixels of
or taken at F (Digital
Panorama) and movies cannot be resized.
• You cannot select a larger resolution and higher quality level than that of
the original image.
1
3
4
5
6
7
5
Use the four-way controller (2345) to select n (Resize)
from the Playback Mode Palette.
Press the 4 button.
The screen for choosing the recorded pixels appears.
Select [Recorded Pixels] and
[Quality Level].
Use the four-way controller (45) to choose
the recorded pixels and quality level.
Use the four-way controller (23) to switch
between [Recorded Pixels] and [Quality
Level].
Recorded Pixels
Quality Level
MENU Cancel
Editing and Printing
2
Enter Q mode and use the four-way controller (45) to
choose the image you want to resize.
16M
OK
OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation does not appear.
Use the four-way controller (23) to select [Overwrite] or
[Save as].
Press the 4 button.
The resized image is saved.
143
Cropping Images
You can delete the unwanted part of a picture and save the cropped image as a
separate image.
Images taken with the recorded pixels of
Panorama) and movies cannot be cropped.
1
2
3
5
Editing and Printing
4
or taken at F (Digital
Enter Q mode and use the four-way controller (45) to
choose the image you want to crop.
Use the four-way controller (2345) to select o (Cropping)
from the Playback Mode Palette.
Press the 4 button.
The cropping screen appears.
The largest size of cropped image is shown with a green frame on the screen.
The cropped image cannot be larger than this cropping frame size.
Choose the cropping area.
The following operations move the green frame
and set the area for cropping on the screen.
Zoom button
(f/y)
Four-way
controller
(2345)
Green Button
5
Changes the size of the
cropped frame
Moves the cropping frame
up, down, left and right
MENU
OK
Cancel
OK
Rotates the cropping frame.
• The button is displayed only
when the cropping frame
can be rotated.
Press the 4 button.
The cropped image is saved with a new file name.
The number of recorded pixels is selected automatically according to the size of
the cropped image. The image is saved at the same quality level as the original.
144
Processing Images to Make Faces Look Smaller
Images are processed to reduce the size of people’s faces detected with the Face
Detection function (p.69) when taking pictures so that they look smaller.
1
2
3
4
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
Use the four-way controller (2345) to select k (Small Face
Filter) from the Playback Mode Palette.
Press the 4 button.
Face detection frames for faces that can be processed are displayed.
Proceed to Step 6 when there is only one detection frame.
Use the four-way controller
(2345) to select a face to be
processed.
A green frame indicates the face that is to
be processed.
9
OK
OK
Use the four-way controller (45)
to change the reduction ratio.
Approx. 5%
Approx. 7%
Approx. 10%
MENU
8
OK
Press the 4 button.
F
G
H
7
OK
Cancel
Editing and Printing
5
6
5
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation dialog does not appear.
Use the four-way controller (23) to select [Overwrite] or
[Save as].
Press the 4 button.
The camera returns to Q mode and the processed image is displayed.
145
You may not be able to process images in the following situations:
• When the size of face taken in relation to an image is too large or too small
• When faces are located in the edges of an image
In such cases, the face detection frame in Step 3 will not appear.
Using the Digital Filters
This mode lets you change the color tones and perform special processing on a
selected image.
B&W/Sepia
5
Editing and Printing
Changes color images to black and white or processes usnig the
sepia filter.
Toy Camera
Images seem to have been taken with a toy camera.
Retro
Images have the feel of old photos with a white border. You can
choose from three filters: Original image, amber, and blue.
Color
Processes the image using the selected color filter. You can choose
from six filters: red, pink, purple, blue, green, and yellow.
Extract Color
Processes the image using the selected color extraction filter. You
can choose from three filters: red, green, and blue.
Color Emphasis There are 4 filters: Sky Blue/Fresh Green/Delicate Pink/Autumn
Leaves.
High Contrast
Adjusts the contrast of the captured images.
Starburst
Processes the image with a special sparkling look achieved by
adding cross-like effects to a highlighted area, such as town lights
at night, light reflected from water, or other light sources. You can
choose from three filters: Cross, Heart, and Star.
Soft
Processes the image into a soft image that appears soft overall.
Fish-eye
Applies a fish-eye lens effect to images.
Brightness
Adjusts the brightness of the image.
Miniature
Blurs part of the image to create a fake miniature scene.
Images taken at F (Digital Panorama), movies or images taken with
another camera cannot be edited using Digital Filter function. An error
message appears if you choose this function from the Playback Mode Palette
and press the 4 button.
1
2
146
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
Use the four-way controller (2345) to select P (Digital
Filter) from the Playback Mode Palette.
3
4
The digital filter selection screen appears.
1 B&W/Sepia
2 Toy Camera
3 Retro
4 Color
5 Extract Color
6 Color Emphasis
7 High Contrast
8 Starburst
9 Soft
10 Fish-eye
11 Brightness
12 Miniature
12
MENU Cancel
1
2
3
4
5
6
7
8
9
10
11
OK
OK
Use the four-way controller (23) to choose the digital filter
you want to use.
The preview image of the results of the filter effect appears.
Use the four-way controller (45) to adjust the effect as
necessary.
Four-way controller
(4)
Retro
Blue
Toy Camera
Weak
High Contrast
Weak
Fish-eye
Weak
Brightness
Dark
Miniature
Upper
B&W/Sepia
Color
Extract Color
Color Emphasis
Starburst
6
B&W/Sepia
Default Setting
Original image
Standard
Standard
Standard
Standard
Upper and lower
Four-way controller
(5)
Amber
Strong
Strong
Strong
Bright
Lower
5
Editing and Printing
5
Press the 4 button.
B&W ↔ Sepia
Red ↔ Pink ↔ Purple ↔ Blue ↔ Green ↔ Yellow
Red ↔ Green ↔ Blue
Sky Blue ↔ Fresh Green ↔ Delicate Pink ↔ Autumn Leaves
Cross ↔ Heart ↔ Star
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation does not appear.
147
7
8
Use the four-way controller (23) to select [Overwrite] or
[Save as].
Press the 4 button.
The images processed with the filter are saved.
Using the HDR Filter
Adjusts parts of the image that are too bright or too dark and processes images
to simulate an HDR effect.
1
2
5
3
Editing and Printing
4
5
6
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
Use the four-way controller (2345) to select
Filter) from the Playback Mode Palette.
(HDR
Press the 4 button.
The preview image of the results of the filter effect appears.
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation does not appear.
Use the four-way controller (23) to select [Overwrite] or
[Save as].
Press the 4 button.
The images processed with the filter are saved.
Using the Ink Rubbing Filter
You can edit the image to look like an ink rubbing.
The Ink Rubbing Filter cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or
(Report) modes
• Images taken with the recorded pixels of
, h, h, l, or m
• Images taken with other cameras
An error message appears in step 3.
1
148
Enter Q mode and use the four-way controller (2345) to
choose the image you want to edit.
2
3
4
Use the four-way controller (2345) to select
Rubbing Filter) from the Playback Mode Palette.
(Ink
Press the 4 button.
The preview image of the results of the filter effect appears.
Use the four-way controller (45)
to choose the effect.
Ink
Rubbing Filter
㝼ᜏࡈࠖ࡞࠲࡯
You can adjust the effect in five levels.
F
Weak
G
Standard
H
Strong
MENU Cancel
5
6
OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation does not appear.
Use the four-way controller (23) to select [Overwrite] or
[Save as].
Press the 4 button.
The images processed with the filter are saved.
• The processed image is saved with the recorded pixels of f/
.
• When there is little contrast between the object and the background, the
shape of the object may not be sharp depending on the conditions of the
original image.
5
Editing and Printing
7
OK
Creating a Collage Image
Make a collage image by placing captured images on a selected pattern.
The collage function cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or
(Report) modes
• Images taken with the recorded pixels of
, l, or m
• Images taken with other cameras
1
Use the four-way controller (2345) to select
from the Playback Mode Palette.
(Collage)
149
2
Press the 4 button.
The item selection screen appears.
Recorded Pixels
Layout
Backgnd.
Select image(s)
3M
Create an image
MENU
Selecting the Number of Recorded Pixels
3
4
5
5
Use the four-way controller (23) to choose the [Recorded
Pixels].
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to choose the recorded pixels.
Editing and Printing
Recorded Pixels
Layout
Backgnd.
Select image(s)
You can choose from h or h.
3M
Create an image
MENU Cancel
6
OK
OK
Press the 4 button.
Returns to the item selection screen.
Selecting the Layout Pattern
7
8
Use the four-way controller (23) to choose the [Layout].
Press the four-way controller
(5).
Recorded Pixels
Layout
Backgnd.
Select image(s)
A pull-down menu appears.
3M
Create an image
MENU
9
10
OK
OK
Use the four-way controller (23) to choose the pattern of layout.
You can choose from 3 patterns of layout (
Press the 4 button.
Returns to the item selection screen.
150
Cancel
/
/
).
Selecting the Background
11
12
13
Use the four-way controller (23) to choose [Backgnd.].
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to choose the background.
Recorded Pixels
Layout
Backgnd.
Select image(s)
You can choose the white background or
the black background.
3M
Create an image
MENU
14
Cancel
OK
OK
Press the 4 button.
Returns to the item selection screen.
Laying Out the Image
5
15
16
17
Use the four-way controller (23) to choose [Select image(s)].
Press the four-way controller (5).
The images to be selected appear.
Use the four-way controller (45)
to choose the image to be placed
and press the 4 button.
The selected image is placed in the
highlighted area in the guide. The guide
appears on the top left of the monitor.
18
Editing and Printing
• The collage function cannot be used on the following images.
-Movies or images taken at F (Digital Panorama) or
(Report) modes
-Images taken with the recorded pixels of
, l, or m
-Images taken with other cameras
These images do not appear as selectable items.
• If you select an image with a 16:9 aspect ratio, the black areas appear
above and below the image.
0/4
100 - 0001
OK
MENU Cancel
Exit
Repeat step 17 to lay out the rest images.
151
19
Press the 9 button.
Returns to the item selection screen.
Saving the Edited Image
20
Use the four-way controller (23)
to select [Create an image].
3M
Recorded Pixels
Layout
Backgnd.
Select image(s)
Create an image
MENU
21
5
22
23
OK
OK
Press the 4 button.
A confirmation dialog for saving the image appears.
Use the four-way controller (2) to select [Save].
Press the 4 button.
Editing and Printing
The edited image is saved.
The quality level of the image is fixed at C (Best).
Red-eye Compensation
You can correct images where the flash has caused the subject to appear with
red eyes.
• The red-eye compensation function cannot be used on images taken at
F (Digital Panorama), movies or on images where red eyes cannot be
detected on the camera. An error message appears in step 3.
• The red-eye compensation function can only be used with still pictures
taken with this camera.
1
2
3
152
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
Use the four-way controller (2345) to select Z (Red-eye
Compensation) from the Playback Mode Palette.
Press the 4 button.
4
5
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation does not appear.
Use the four-way controller (23) to select [Overwrite] or
[Save as].
Press the 4 button.
The edited image is saved.
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are 6 frames
already stored in the camera. You can copy the optional frames from the CDROM supplied with the camera.
N (Frame Composite) cannot be used on the following images.
• Movies or images taken at F (Digital Panorama) or
(Report) modes
• Images taken with the recorded pixels of
, l, or m
An error message appears in step 3.
2
3
4
5
Enter Q mode and use the four-way controller (45) to
choose the image to which you want to add a frame.
Use the four-way controller (2345) to select N (Frame
Composite) from the Playback Mode Palette.
Press the 4 button.
The 12-frame display of the frame selection screen appears.
Use the four-way controller
(2345) to choose a frame.
Editing and Printing
1
OK OK
153
5
Press the y button.
The selected frame appears in singleimage display.
You can choose another frame using either
of the following operations.
Four-way
controller (45)
Zoom button
left (f)
6
OK
OK
Press the 4 button.
The image position and size adjustment
screen appears.
You can adjust the image using either of the
following operations.
5
Editing and Printing
Four-way
controller
(2345)
Zoom button
(f/y)
7
8
9
154
Press to choose a
different frame.
Press to return to the
12-frame display of the
frame selection screen,
and then perform step 5 to
choose a different frame.
Press to adjust the
position of the image
MENU
OK
Cancel
OK
Press to make the image
larger or smaller.
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation does not appear.
Use the four-way controller (23) to select [Overwrite] or
[Save as].
Press the 4 button.
The edited image is saved with the recorded pixels of h/h.
Optional Frames
The optional frames are stored in the CD-ROM supplied with the camera. To use
these frames, copy them from the CD-ROM. These optional frames are deleted if the
files on the built-in memory are deleted with a computer or if the built-in memory is
formatted.
To Copy Frames
1
2
7
8
If you leave the SD Memory Card in the camera, the frames will be copied onto
the card, not into the camera’s built-in memory.
Connect the camera to the computer using the provided
USB cable.
Refer to “Connecting to a Computer” (p.197) for instructions on connecting the
camera to a computer.
When the device detection window opens, click [Cancel].
Insert the CD-ROM into the CD-ROM/DVD drive.
When the installer window opens, click [EXIT].
If there is not already a “FRAME” folder in the root directory
of the camera (Removable Disk), create the folder.
Copy the desired files from the FRAME folder in the root
directory of the CD-ROM to the FRAME folder on the camera
(Removable Disk).
For information on working with files on your computer, refer to the instruction
manual supplied with the computer.
Disconnect the USB cable from the computer and camera.
5
Editing and Printing
3
4
5
6
Remove the SD Memory Card from the camera.
Refer to “Connecting to a Computer” (p.197) for instructions on disconnecting
the camera from a computer.
• Frames can be stored both in the built-in memory and on the SD Memory Cards,
but using large numbers of frames may slow down processing times.
155
To Use a New Frame
The frames downloaded from the PENTAX website or other source can be used
for adding a frame to pictures.
• Extract the downloaded frame and copy it to the FRAME folder in the builtin memory or the SD Memory Card.
• The FRAME folder is created when the SD Memory Card is formatted with
this camera.
• For more information on downloading, refer to the PENTAX website.
Overlaying Your Original Frame on Still Pictures
You can overlay your original frame (decorative frame) on still pictures. You can
select the type and color of an original frame and its position.Text can also be
entered.
5
Frame
Editing and Printing
Type of original
Blur/Edge Composite
frame
F (All sides)/G (Upper and lower sides)/H (Right and left sides)/
Frame Type
I (Upper side)/J (Lower side)/K (Left side)/L (Right side)
Color
White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
Text Stamp
Available
characters
Display Position
Color
A – Z, a – z, 0 – 9, Symbols
M (Upper-left)/N (Upper-center)/O (Upper-right)/P (Lower-left)/
Q (Lower-center)/R (Lower-right)
White/Gray/Black/Pink/Pumpkin/Dark red/Dark green
The Original Frame function cannot be used on images taken at F (Digital
Panorama) or
(Report) modes, images taken with the recorded pixels of
/h/h/l/m or movies. An error message appears in Step 3.
156
1
2
3
4
Enter Q mode and use the four-way controller (45) to
choose the image to which you want to add a frame.
Use the four-way controller (2345) to select E (Original
Frame) from the Playback Mode Palette.
Press the 4 button.
The original frame type selecting screen appears.
Use the four-way controller (23)
to select an original frame type,
and press the 4 button.
Blur
The frame setting screen appears.
Edge Composite
Cancel
OK
5
Use the four-way controller (23)
to select [Frame Type], and press
the four-way controller (5).
5
Position Adjustment
Cancel
7
8
9
10
OK
Save
Use the four-way controller (23) to select a frame type, and
press the four-way controller (4).
Set [Color] in the same way as in Steps 5 and 6.
Adjust the position of the frame and image.
Editing and Printing
Frame Type
Color
Text Stamp
MENU
6
OK
For details, refer to “To Adjust the Position of the Frame and an Image” (p.158).
Use the four-way controller (23) to select [Text Stamp], and
press the four-way controller (5).
The Text Stamp screen appears.
When you do not want to enter characters, proceed to Step 11.
Set up the text stamp.
For details, refer to “To Set Up Text Stamp”
(p.159).
A/a
Text Stamp
A B C D E F G H I J K L MN O P Q R S TUVWX Y Z
0 1 2 3 4 5 6 7 8 9 . , ( ) [ ] < >@ / : ; ! ?
Finish
# + = $% { }
Delete One Character
MENU Cancel
OK
Enter
157
11
12
13
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the following confirmation dialog does not appear.
Use the four-way controller (23) to select [Overwrite] or
[Save as].
Press the 4 button.
The edited image is saved with the recorded pixels of f/
.
To Adjust the Position of the Frame and an Image
1
Press the Green button.
The frame position adjustment screen
appears.
Four-way controller
(2345)
Zoom button right
(y)
Zoom button left
(f)
5
Editing and Printing
2
Press to adjust the
position of the frame
Press to make the
frame larger
Press to make the
frame smaller
/
OK
/
OK
Press the Green button.
The image position adjustment screen
appears.
Four-way controller
(2345)
Zoom button right
(y)
Zoom button left
(f)
3
Press to adjust the
position of the image
Press to make the
image larger
Press to make the
image smaller
Press the 4 button.
The screen returns to the original screen.
158
OK
MENU
Cancel
OK
MENU
Cancel
To Set Up Text Stamp
1
Use the four-way controller
(2345) to select a character
and press the 4 button.
The selected character is input.
Up to 52 characters can be input.
I button
Zoom button right
(y)
Zoom button left
(f)
Green button
2
Delete One Character
MENU Cancel
OK
OK
Use the four-way controller (2345) to select [Finish] and
press the 4 button.
Use the four-way controller (23)
to select [Display Position] and
press the four-way controller (5).
Enter on this condition
F R I END S
Display Position
Color
Preview
MENU Cancel
4
5
6
OK
OK
Use the four-way controller (23) to select the display
position and press the four-way controller (4).
5
Editing and Printing
3
Press to switch
between upper and
lower case
Press to move the
cursor to the right
Press to move the
cursor to the left
Press to delete the
character
A/a
Text Stamp
A B C D E F G H I J K L MN O P Q R S TUVWX Y Z
0 1 2 3 4 5 6 7 8 9 . , ( ) [ ] < >@ / : ; ! ?
Finish
# + = $% { }
FR I ENDS
Use the four-way controller (23) to select [Color] and press
the four-way controller (5).
Use the four-way controller (23) to select the color and
press the four-way controller (4).
159
To View the Preview Screen
1
Press the Green button.
The preview screen appears.
F R I ENDS
MENU
2
3
Press the 3 button.
The screen returns to the original screen.
Press the 4 button.
Proceed to Step 11 on p.158.
Editing Movies
5
Editing and Printing
You can extract a frame from the recorded movie to save as a still picture, divide
a movie into two, or add a title picture to a movie.
1
2
3
Enter Q mode and use the four-way controller (45) to
choose the movie you want to edit.
Use the four-way controller (2345) to select [ (Movie
Editing) from the Playback Mode Palette.
Press the 4 button.
The movie editing selection screen
appears.
Save as Still Image
Divide Movies
Adding title picture
Cancel
OK
OK
To Save a Frame from a Movie as a Still Picture
4
5
Select [Save as Still Image] on the movie editing selection
screen.
Press the 4 button.
The screen for selecting a frame to be saved as a still picture appears.
160
6
Use the four-way controller
(2345) to choose the frame
you want to save.
2
3
4
7
5
Plays or pauses the movie
Stops the movie and returns to
the first frame
Reverses the movie frame by
frame
Advances the movie frame by frame
100 - 0042
00:06
Select the image
to save
1
MENU
Cancel
OK
OK
Press the 4 button.
The selected frame is saved as a still picture.
To Divide a Movie
4
5
Press the 4 button.
Use the four-way controller
(2345) to determine the
dividing position.
2
3
4
7
8
5
The screen for choosing the dividing position appears.
5
Plays or pauses the movie
Stops the movie and returns to
the first frame
Reverses the movie frame by
frame
Advances the movie frame by frame
100 - 0042
00:09
Select image for
dividing position
31
MENU
Cancel
OK
OK
OK
OK
Editing and Printing
6
Select [Divide Movies] on the movie editing selection screen.
Press the 4 button.
A confirmation dialog appears.
Use the four-way controller (2) to
select [Divide].
Divide at this position?
Divide
Cancel
161
9
Press the 4 button.
The movie is divided at the specified position, each segment is saved as a new
file, and the original movie is deleted.
The protected movies cannot be divided.
• Only the movie for more than 2 seconds (31 frames) can be divided.
• For dividing, every 30 frames (31st, 61st, 91st.. frames) can be selected.
To Add a Title Picture to a Movie
4
5
5
Editing and Printing
6
7
8
Select [Adding title picture] on the movie editing selection
screen.
Press the 4 button.
The screen for selecting a title picture appears.
Use the four-way controller (45) to choose the desired title
picture.
Only images available for use with the title picture are displayed.
Press the 4 button.
The screen for confirming the position of the title picture appears.
Use the four-way controller (23)
to select the position.
A
B
9
Adds the title picture to the
beginning of the movie
Adds the title picture to the end of
the movie
Specify the position of
title picture to add
Cancel
OK
Press the 4 button.
The selected picture is saved as the title picture.
• Protected movies cannot be added a title picture.
• If a movie is more than 26 minutes long after adding title pictures, you
cannot add any more title pictures to it.
162
OK
• When a title picture is added to the beginning of a movie: When the movie
is played back, the still picture is played back for three seconds, and then
the movie is played back. The still picture registered as title picture is used
as the thumbnail of the movie.
When a title picture is added to the end of a movie: When the movie is
played back, the movie is played back, and then the still picture is played
back for three seconds. The thumbnail of the movie is not changed by
adding a title picture to the end of the movie.
• Only a still picture with the same aspect ratio as the movie can be set as a
title picture.
Copying Images and Sound Files
You can copy images and sound files from the built-in memory to the SD Memory
Card and vice versa. This function can only be selected when an SD Memory
Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing the SD
Memory Card.
2
Use the four-way controller (2345) to select p (Image/
Sound Copy) from the Playback Mode Palette.
Press the 4 button.
The copying method selection screen appears.
To Copy Files from the Built-in Memory to the SD Memory Card
Editing and Printing
1
5
All the images and sound files in the built-in memory are copied to the SD Memory
Card at once. Before copying the images, make sure that there is enough space
on the SD Memory Card.
3
Use the four-way controller (2) to
select [2}{].
SD
SD
Cancel
OK
4
OK
Press the 4 button.
All the images and sound files are copied to the SD Memory Card.
163
To Copy Files from the SD Memory Card to the Built-in Memory
Selected images and sound files from the SD Memory Card are copied to the
built-in memory one by one.
3
4
5
Use the four-way controller (23) to select [{}2].
Press the 4 button.
Use the four-way controller (45)
to select the image/sound file you
want to copy.
100 - 0017
Copies this image/sound
MENU Cancel
6
5
Editing and Printing
164
OK
OK
Press the 4 button.
The selected image/sound file is copied to the built-in memory.
To copy other images or sound files, repeat Steps 3 to 6. Select [Cancel] to exit
the copy operation.
• Images with sounds (Voice Memo) are copied with the sound.
• When a file is copied from the SD Memory Card to the built-in memory, it is
assigned a new file name.
Printing Settings
You can print pictures taken with the camera in the following ways.
1 Go to a photo processing lab.
2 Use a printer that has an SD Memory Card slot to print directly from the SD
Memory Card.
3 Use the software that is available on your computer to print images.
Setting the Printing Service (DPOF)
DPOF (Digital Print Order Format) is the format for storing print order data on still
pictures captured with a digital camera. Once the print order data has been
stored, the pictures can be printed according to the DPOF settings using a DPOFcompatible printer or at a photo processing lab.
DPOF cannot be set for movies or sound-only files.
Printing a Single Image
Set the following items for each image.
Copies For setting the number of prints. You can print up to 99 copies.
Date Specify whether you want the date inserted on the print or not.
1
2
5
Editing and Printing
If the picture already has the date and/or time imprinted on it (p.109), do not
set [Date] to O (On) in DPOF setting. If you select O, the imprinted date and/
or time may overlap.
Use the four-way controller (2345) to select r (DPOF)
from the Playback Mode Palette.
Press the 4 button.
The screen for selecting [Single Image] or [All Images] appears.
165
3
Use the four-way controller (23)
to select [Single Image].
Single Image
All Images
Cancel
OK
4
5
Press the 4 button.
The message [Applies DPOF settings to this image] appears.
To make DPOF settings for another image, use the four-way controller (45) to
select another image.
If DPOF settings have already been made for the selected image, the previous
number of copies and date setting (O (On) or P (Off)) will be displayed.
Use the four-way controller (23)
to choose the number of copies.
100 - 0017
Applies DPOF settings
to this image
Copies
Date
5
00
Editing and Printing
Date
Cancel
OK
MENU
6
7
OK
Use the Green button to choose
whether to insert the date or not.
O(On) The date will be imprinted.
P (Off) The date will not be imprinted.
To continue setting DPOF print order data,
use the four-way controller (45) to choose
another image and repeat steps 5 and 6.
OK
100 - 0017
Applies DPOF settings
to this image
Copies
Date
01
Date
MENU Cancel
OK
OK
Press the 4 button.
The setting is saved and the screen shown in Step 3 reappears.
Depending on the printer or printing equipment at the photo processing lab,
the date may not be imprinted on the pictures even if O (On) is selected in
the DPOF settings.
To cancel DPOF settings, set the number of copies to [00] in step 5 and press
the 4 button.
166
Printing All Images
DPOF settings are applied to all the images stored in the camera.
1
2
3
Select [All Images] in step 3 on p.166.
Press the 4 button.
The message [Applies DPOF settings to all images] appears.
Choose the number of copies and
whether to insert the date or not.
Refer to steps 5 and 6 in “Printing a Single
Image” (p.166) for details of how to make
the settings.
Applies DPOF settings
to all images
Copies
Date
01
Date
MENU Cancel
4
OK
OK
Press the 4 button.
The settings for all the images are saved and the camera returns to the DPOF
setting screen.
5
Editing and Printing
• The number of copies specified in the DPOF settings applies to all the
images. Before printing, check that the number is correct.
• Settings for single images are canceled when settings are made with [All
Images].
167
Recording Sound (Voice Recording
Mode)
6Recording and
Playing Back Sound
You can record sound with the camera. The microphone is located on front of the
camera. When recording sound, aim the microphone at the sound source.
Microphone
Setting Voice Recording
To use the Voice Recording function, assign it to the Green button first.
When the shooting mode is set to 9 (Green) mode, [Green Button] settings
cannot be configured on the [A Rec. Mode] menu. To configure the settings,
first switch to a mode other than 9.
6
Recording and Playing Back Sound
168
1
2
3
Use the four-way controller (23) to select [Green Button] on
the [A Rec. Mode] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to select [Voice Recording] and
press the 4 button.
The Voice Recording function is assigned
to the Green button.
Green Button
Green Mode
Voice Recording
Movie
Fn Setting
MENU Cancel
OK
OK
Recording Sounds
1
2
3
Press the Green button in A
mode.
The camera enters O (Voice Recording)
mode. The remaining recordable time and
the recording time of the current file appear
on the display.
1 Recording time
2 Remaining recordable time
1
01:31:44
00:00:00
SHUTTER
Start
Press the shutter release button
fully.
Recording starts. The self-timer lamp and
REC icon (red) blink during recording.
When the Green button is pressed during
recording, an index is added to the current
sound file.
2
01:30:32
REC
00:01:22
Index
Stop
SHUTTER
Press the shutter release button fully.
Recording stops.
6
Recording and Playing Back Sound
• If you press and hold down the shutter release button for more than one
second in step 2, recording continues until you take your finger off the
button. This is useful for recording short sounds.
• Sound is saved in WAVE monaural files.
169
Playing Back Sound
You can play back the sound files you recorded in Voice Recording.
1
2
3
Press the Q button.
Use the four-way controller (45) to choose a sound file to
play back.
Press the four-way controller (2).
Playback starts.
1 Total file recording time
2 Playback time
1
2
100 - 0025
00:00:00
00:01:30
02/02/'12 14:25
The following operations can be performed during playback.
Four-way controller (2)
Pauses playback
Zoom button right (y)
Increases the volume
Zoom button left (f)
Reduces the volume
If there are no recorded indexes:
6
Recording and Playing Back Sound
170
Four-way controller (4)
Four-way controller (5)
Reverses playback
Fast forwards playback
If there are recorded indexes:
Four-way controller (4)
Four-way controller (5)
4
Plays back starting from the previous index
Plays back starting from the next index
The following operations can be performed while playback is paused.
Four-way controller (2)
Resumes playback
Four-way controller (4)
Rewinds approx. 5 seconds
Four-way controller (5)
Advances approx. 5 seconds
Press the four-way controller (3).
Playback stops.
Adding a Voice Memo to Images
You can add a voice memo to your still pictures.
Recording a Voice Memo
1
2
3
Enter Q mode and use the four-way controller (45) to
choose the still picture to which you want to add a voice
memo.
Use the four-way controller (2345) to select \ (Voice
Memo) from the Playback Mode Palette.
Press the 4 button.
Recording starts.
4
100 - 0038
01:31:44
Press the 4 button.
• A voice memo cannot be added to the image that already has a voice
memo. Delete the old voice memo (p.135) and record a new one.
• A voice memo cannot be added to protected images (p.138).
6
Recording and Playing Back Sound
Recording stops.
171
Playing Back a Voice Memo
1
2
Enter Q mode and use the four-way controller (45) to
choose the still picture with the voice memo that you want to
play back.
U appears on images with voice memos in single-image display.
Press the four-way controller
(2).
100 - 0038
Playback starts.
Edit
3
The following operations can be performed during playback.
Zoom button right (y)
Increases the volume
Zoom button left (f)
Reduces the volume
Press the four-way controller (3).
Playback stops.
6
Recording and Playing Back Sound
172
02/02/'12 14:25
Deleting a Single Image/Sound File 1p.135
Camera Settings
7Settings
Setting the Setting Menu
Settings for the camera are set from the [W Setting] menu. Refer to explanations
for each function on how to make these settings.
1
2
3
Press the 3 button in Q mode.
The [W Setting] menu appears.
When you press the 3 button in A mode, press the four-way controller
(5).
Use the four-way controller (2345) to select an item and
set it up.
After finishing the settings, press the 3 button.
The setting is saved and the camera returns to the previous screen.
To Save the Setting and Start Taking Pictures
3
Press the shutter release button halfway.
The setting is saved and the camera returns to capture mode.
When the [W Setting] menu is displayed from Q mode, you can switch to A
mode by pressing the Q button.
3
Settings
To Cancel the Changes and Continue with Menu Operations
7
Press the 3 button before you have finished the settings.
The changes are canceled and you can select a menu.
The 3 button function differs depending on the screen. Refer to the
guide indications.
MENU Exit
Exits the menu and returns to the original screen.
MENU
Returns to the previous screen with the current setting.
MENU Cancel
Cancels the current selection, exits the menu and returns
to the previous screen.
173
Formatting the Memory
Formatting deletes all the data on the SD Memory Card or the built-in memory.
Be sure to use this camera to format (initialize) an SD Memory Card that is
unused or has been used on other cameras or digital devices.
• Do not remove an SD Memory Card while it is being formatted. This may
damage the card and make it unusable.
• Formatting deletes protected images and any data recorded on the card
with a computer or any camera.
• SD Memory Cards formatted on a computer or device other than this
camera cannot be used. Be sure to format the card with the camera.
• To format the built-in memory, be sure to eject the SD Memory Card
beforehand. Otherwise, the SD Memory Card will be formatted.
1
2
3
Use the four-way controller (23) to select [Format] on the
[W Setting] menu.
Press the four-way controller (5).
The [Format] screen appears.
Use the four-way controller (2) to
select [Format].
Format
All data will be deleted
Format
Cancel
7
Settings
174
OK
4
OK
Press the 4 button.
Formatting starts.
When formatting is completed, the camera returns to A mode or Q mode.
Changing the Sound Settings
You can adjust the volume of operation sounds and change the type of sound.
1
2
Use the four-way controller (23) to select [Sound] on the
[W Setting] menu.
Press the four-way controller
(5).
The [Sound] screen appears.
Sound
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
Off
1
1
1
MENU
To Change the Operation Volume/Playback Volume
3
4
5
Use the four-way controller (23) to select [Operation Volume].
Use the four-way controller (45) to adjust the volume.
Set the volume to f to mute the start-up sound, shutter sound, operation sound,
and self-timer sound.
Change [Playback Volume] in the same way as in steps 3 and
4.
3
4
5
6
7
Use the four-way controller (23) to select [Start-up Sound].
7
Settings
To Change the Sound Type
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select the sound type.
Choose from [1], [2], [3], [4], [Off], or [USER].
Press the 4 button.
Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in steps 3 to 6.
175
Changing the Sound (Using a Recorded Sound File)
You can use a sound recorded by the camera for sound settings.
The first two seconds of the selected sound file will be played as the [USER]
sound.
1
2
Select [USER] in step 5 in “To Change the Sound Type”.
Press the 4 button.
100 - 0038
The playback screen for the recorded
sound files appears.
MENU
3
4
5
7
Cancel
OK
OK
Use the four-way controller (45) to select a sound file.
Play back the selected file to confirm.
Four-way controller (2): Plays back the first two seconds of the sound file.
Four-way controller (3): Stops playback.
Press the 4 button.
The selected sound is set as the [USER] sound.
Set [Shutter sound], [Operation Sound] and [Self-timer
Sound] in the same manner.
The Sound settings are saved when the camera is turned off.
Settings
Changing the Date and Time
You can change the initial date and time settings (p.46). You can also set the style
in which the date appears on the camera.
1
176
Use the four-way controller (23) to select [Date Adjustment]
on the [W Setting] menu.
2
Press the four-way controller (5).
The [Date Adjustment] screen appears.
Date Adjustment
Date Format
mm/dd/yy 24h
Date
01/01/2012
00:00
Time
Settings complete
MENU Cancel
3
4
5
6
7
8
10
11
The frame moves to [mm/dd/yy].
Depending on the initial setting or previous setting, [dd/mm/yy] or [yy/mm/dd]
may be displayed.
Use the four-way controller (23) to choose the date and time
display style.
Choose from [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].
Press the four-way controller (5).
The frame moves to [24h].
Use the four-way controller (23) to select [24h] (24-hour
display) or [12h] (12-hour display).
Press the four-way controller (5).
The frame returns to [Date Format].
Press the four-way controller (3).
The frame moves to [Date].
Press the four-way controller (5).
The frame moves to one of the following items depending on the date style set
in step 4.
Month for [mm/dd/yy]
Day for [dd/mm/yy]
Year for [yy/mm/dd]
The following operations and screens use [mm/dd/yy] as an example. The
operations are the same even if another date style has been selected.
7
Settings
9
Press the four-way controller (5).
Use the four-way controller (23) to change the month.
Press the four-way controller (5).
The frame moves to the day field. Use the four-way controller (23) to change
the day. After changing the day, change the year in the same manner.
177
12
13
14
Change the time in the same way as in steps 7 to 11.
If you selected [12h] in step 6, the setting switches between am and pm
corresponding to the time.
Press the four-way controller (3) to select [Settings
complete].
Press the 4 button.
The date and time settings are saved and the screen returns to the [W Setting]
menu.
When you press the 4 button in step 14, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time signal (on
the TV, radio, etc.) reaches 00 seconds.
Setting the Alarm
You can set the alarm to ring at a specified time.
You can choose whether the alarm will ring at the same time every day or only
once at the set time.
Setting the Alarm
1
7
Settings
2
Use the four-way controller (23) to select [Alarm] on the
[W Setting] menu.
Press the four-way controller
(5).
The Alarm screen appears.
Alarm
14:14
Alarm
Off
Time
00:00
Settings complete
MENU
3
4
5
6
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select the alarm.
Choose from [Off], [Once], or [Everyday].
Press the 4 button.
Press the four-way controller (3).
The frame moves to the [Time] field.
178
Cancel
7
8
9
10
11
Press the four-way controller (5).
The frame moves to the hour field.
Use the four-way controller (23) to change the hour, then
press (5).
The frame moves to the minute field.
Change the minutes in the same manner.
Press the 4 button.
Press the four-way controller (3).
The frame moves to [Settings complete].
Press the 4 button.
When the alarm is set to [Off], the settings
are saved and the screen returns to the [W
Setting] menu.
Check that [Alarm] is set to P (Off).
When the alarm is set to [Once] or
[Everyday], [Alarm is set] is displayed and
the power turns off.
1/4
Setting
Sound
Date Adjustment
Alarm
World Time
Text Size
Language
01/01/2012
Standard
English
MENU Exit
Checking the Alarm
1
Check that [Alarm] is set to O (On).
Press the four-way controller
(5).
The Alarm screen appears.
Check the alarm frequency and time.
Alarm
14:14
Alarm
Once
Time
14:25
7
Settings
2
Use the four-way controller (23) to select [Alarm] on the
[W Setting] menu.
Settings complete
MENU
Cancel
179
Turning the Alarm Off
The Clock display appears and the alarm rings
for one minute when the set time is reached
while the camera is turned off.
You can stop the alarm by pressing any button
on the camera while the alarm is ringing.
• The alarm will not ring if the camera is on when the set time is reached.
• Even if an alarm is set, the alarm will not ring while interval shooting is being
performed.
Setting the World Time
The date and time selected in “Setting the Date and Time” (p.46) and “Changing
the Date and Time” (p.176) serve as the W ( Hometown) date and time. By using
the world time function, you can display the time in a city other than the Hometown
(X Destination). This is useful when taking pictures in a different time zone.
To Set the Destination
7
1
Settings
2
Use the four-way controller (23) to select [World Time] on
the [W Setting] menu.
Press the four-way controller
(5).
The [World Time] screen appears.
World Time
Select Time
DST
OFF
Destination
New York
14:25
Hometown
New York
14:25
DST
OFF
MENU
3
4
Use the four-way controller (23) to select X (Destination).
Press the four-way controller (5).
The [Destination] screen appears. The city that is currently selected blinks on
the map.
180
5
Use the four-way controller (45)
to change the Destination city.
14:25
Destination
The current time, location and time
difference of the selected city appear.
City
New York
DST
MENU
6
7
8
TimeDif.
+ 0:00
Cancel
OK
OK
Use the four-way controller (23) to select [DST].
Use the four-way controller (45) to select O (On) or P (Off).
Select O (On) if the Destination city uses daylight saving time.
Press the 4 button.
The [World Time] setting is saved.
Select W (Hometown) in step 3 to set the city and DST setting for the
Hometown city.
To Display the Time of the Destination (Select Time)
1
2
5
6
Press the four-way controller (5).
The [World Time] screen appears.
Use the four-way controller (23) to select [Select Time].
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select X (Destination) or
W (Hometown).
X
W
7
Settings
3
4
Use the four-way controller (23) to select [World Time] on
the [W Setting] menu.
Displays the time of the Destination city
Displays the time of the Hometown city
Press the 4 button.
The setting is saved.
When X (Destination) is selected the X
icon appears on the display to indicate that
the destination date and time are displayed
in A mode.
P
38
181
Setting the Text Size on the Menu
You can set the text size of the item selected with the cursor on the menu to
[Standard] (normal display) or [Large] (magnified display).
1
2
3
Use the four-way controller (23) to select [Text Size] on the
[W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to select the text size.
Select from [Standard] or [Large].
4
Setting
Sound
Date Adjustment
Alarm
World Time
Text Size
1/4
01/01/2012
Language
Standard
Large
MENU Cancel
OK
OK
Press the 4 button.
The setting is saved.
Changing the Display Language
7
You can change the language in which the menus, error messages, etc. are
displayed.
Settings
1
2
3
4
Use the four-way controller (23) to select [Language/
on the [W Setting] menu.
Press the four-way controller (5).
The [Language/
] screen appears.
Use the four-way controller (2345) to select the desired
language.
Press the 4 button.
The menus and messages are displayed in the selected language.
182
]
Changing the Naming System of the Folder
You can change the naming system of the folder for storing images. When the
naming system is set to the [Date], pictures are saved in separate folders by the
date they were taken.
Choice
Date
(Default)
PENTX
_USER
The name of the folder
xxx_mmdd (3-digit folder number_month day)
* xxx_ddmm (3-digit folder number_day month) when the date format is
set to [dd/mm/yy]
A folder is made by day, and the images and sound files of the day are
saved in the folder.
xxxPENTX (xxx is the 3-digit folder number)
Up to 9999 images are saved in the same folder.
xxxAAAAA (xxx is the automatically given 3-digit folder number, and
AAAAA is the 5-digit letters that you entered)
Up to 9999 images are saved in the same folder.
Image taken on April 1
with the folder name
setting set to [Date]
created.
A folder with the name
“100_0401” is created.
The images are saved in
the “100_0401” folder.
DCIM
100
Image taken on April 10
with the folder name
setting set to [PENTX]
created.
A folder with the name
“102PENTX” is created.
The images are saved in
the “102PENTX” folder.
Image taken on April 15
with the folder name
setting set to [PENTX]
created.
A new folder is not
created.
The images are saved in
the “102PENTX” folder.
DCIM
DCIM
DCIM
100
100_0401
101
101_0408
• Up to 900 folders can be created.
• Up to 9999 images or sounds can be saved in a
folder.
100
100_0401
101
100
100_0401
101
101_0408
101_0408
102
102PENTX
102
102PENTX
7
Settings
100_0401
Image taken on April 8
with the folder name
setting set to [Date]
created.
A folder with the name
“101_0408” is created.
The images are saved in
the “101_0408” folder.
183
Selecting a Rule for Naming Folders
1
2
3
4
Use the four-way controller (23) to select [Folder Name] on
the [W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select the rule for naming
folders.
Press the 4 button.
The setting is saved.
Naming the Folder Yourself
You can name the folder in which to save images.
You can enter up to five numbers and letters.
The 5-digit name is displayed after the 3-digit folder number.
1
2
Press the four-way controller
(5).
The folder naming screen appears.
“_USER” has already been entered.
7
Folder Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
Settings complete
Settings
U S E R
MENU Cancel
3
4
184
Select [_USER] in step 3 in “Selecting the Rule for Naming
Folders”.
OK
Enter
Use the four-way controller (2345) to select the letter to
enter, and press the 4 button.
The first letter is fixed and the cursor moves to the second letter.
Repeat step 3 and enter the remaining letters.
5
Press the four-way controller (4)
while “A” is selected, or press
(35) while “_” is selected.
The frame moves to [Settings complete].
Folder Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
Settings complete
P A R T Y
MENU Cancel
6
OK
OK
Press the 4 button twice.
The folder name is fixed, and returns to the [W Setting] menu.
• You can move the cursor by pressing the zoom button.
• The folder name you have set is displayed in the [R Setting] menu.
Changing the Naming System of the File
You can change the naming system of the file.
Choice
IMGP
(Default)
USER
The name of the file
IMGPxxxx (xxxx is the automatically assigned 4-digit file number)
The file number follows the setting character which is specified to the
camera.
AAAAxxxx (xxxx is the automatically assigned 4-digit file number)
The file number follows the name you have entered.
7
1
2
3
4
Use the four-way controller (23) to select [File Name] on the
[W Setting] menu.
Settings
Selecting a Rule for Naming Files
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select the rule for naming
files.
Press the 4 button.
The setting is saved.
185
Naming the File Yourself
You can name the file of images that are captured.
You can enter up to four numbers and letters. The 4-digit name is displayed
before the 4-digit file number.
1
2
Select [USER] in step 3 in “Selecting a Rule for Naming Files”.
Press the four-way controller (5).
The file naming screen appears.
“USER” has already been entered.
File Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
Settings complete
U S E R
MENU Cancel
3
4
5
OK
Enter
Use the four-way controller (2345) to select the letter to
enter, and press the 4 button.
The first letter is fixed and the cursor moves to the second letter.
Repeat step 3 and enter the remaining letters.
Press the four-way controller (4)
while “A” is selected, or press
(35) while “_” is selected.
The frame moves to [Settings complete].
7
File Name
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
Settings complete
A B C D
Settings
MENU Cancel
6
OK
OK
Press the 4 button twice.
The file name is fixed, and returns to the [W Setting] menu.
• You can move the cursor by pressing the zoom button.
• The file name you have set is not changed even if you reset the camera.
186
Changing the Video Output Format
When you connect the camera to AV equipment, choose the appropriate video
output format (NTSC or PAL) for taking and playing back images.
1
2
3
4
Use the four-way controller (23) to select [Video Out] on the
[W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select a video output
format.
Choose the video output format to match the output format of the AV equipment.
Press the 4 button.
The setting is saved.
Depending on the country or region, images and sound files may fail to be
played back if the video output format is set differently from the one in use
there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.140
Video Output Format by City 1p.232
7
Settings
187
Selecting the HDMI Output Format
When you connect the camera to AV equipment with an HDMI cable, set the
appropriate video output resolution for playing back images. The default setting
is [Auto].
1
2
3
4
Use the four-way controller (23) to select [HDMI Out] on the
[W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select an output format.
Choose the HDMI output format to match the output format of the AV equipment.
Press the 4 button.
The setting is saved.
The items on the pull-down menu vary depending on the selected Video
output format.
To change the display, set the Video output format before setting the HDMI
output format.
The table below shows the combinations of the Video output format and
HDMI output.
7
Settings
188
Video output format
NTSC
PAL
Auto (The largest size that both the TV and
camera support is automatically selected)
1080i (1920×1080i)
Resolution
720p (1280×720p)
480p (1920×1080i)
576p (720×576p)
Setting the Eye-Fi Communication
You can automatically transfer images or movies to a computer or similar devices
via wireless LAN using a commercially available Eye-Fi card. For details on
transferring images, refer to “Transferring Images Using an Eye-Fi Card” (p.218).
The default setting is P (Off).
1
2
3
Use the four-way controller (23) to select [Eye-Fi] on the
[W Setting] menu.
Use the four-way controller (45) to select O (On) or P (Off).
O (On)
P (Off)
Turns on communication using an Eye-Fi card
Turns off communication using an Eye-Fi card
Press the 4 button.
The setting is saved.
To establish an Eye-Fi communication, you first have to specify a wireless
LAN access point and transfer destination on the Eye-Fi card. For details on
how to set up the card, refer to the operating manual supplied with the EyeFi card.
Adjusting the Brightness of the Display
You can adjust the brightness of the display to 7 levels.
2
Use the four-way controller (23) to select [Brightness Level]
on the [W Setting] menu.
Use the four-way controller (45) to adjust the brightness.
F
G
H
Dark
Normal
Bright
7
Settings
1
189
Using the Power Saving Function
You can save battery power by setting the display to dim automatically when no
operation is performed for a fixed time. After the power saving function has been
activated, the display returns to the ordinary brightness if any button is pressed.
1
2
3
4
Use the four-way controller (23) to select [Power Saving] on
the [W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select the time until the
camera enters power saving mode.
Choose from [2min.], [1min.], [30sec.], [15sec.], [5sec.] or [Off].
Press the 4 button.
The setting is saved.
• Power Saving does not function in the following situations:
- While taking pictures in j (Continuous Shooting) and c (Burst
Shooting) modes
- In playback mode
- During movie recording
- While the camera is connected to a computer
- When using the AC adapter
- While a menu is being displayed
- In
(Digital Microscope) mode
• When no operation is performed after the camera is turned on, Power
Saving is activated only after 15 seconds elapse even if [5sec.] is set.
7
Settings
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is performed
for a fixed time.
1
2
Use the four-way controller (23) to select [Auto Power Off]
on the [W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
190
3
4
Use the four-way controller (23) to select the time until the
camera turns off automatically.
Choose from [5min.], [3min.] or [Off].
Press the 4 button.
The setting is saved.
Auto Power Off does not function in the following situations:
• While taking pictures in j (Continuous Shooting) and c (Burst Shooting)
modes
• While recording a movie
• During a slideshow or movie/sound playback
• While the camera is connected to a computer
• While recording sound in O (Voice Recording) mode
• While images are being transferred in Eye-Fi communication.
Setting the Quick Zoom Function
While playing back images in Q mode, you can set whether to use [Quick Zoom]
to enlarge the playback image up to 10× when pressing the y button once.
1
2
Use the four-way controller (23) to select [Quick Zoom] on
the [W Setting] menu.
Use the four-way controller (45) to switch between O (On) or
P (Off).
The Quick Zoom is available.
The Quick Zoom is not available.
Setting the Guide Display
7
Settings
O (On)
P (Off)
Set whether to display the guide for the Capture Mode Palette or Playback Mode
Palette.
1
2
Use the four-way controller (23) to select [Guide Display] on
the [W Setting] menu.
Use the four-way controller (45) to switch between O (On) or
P (Off).
O (On)
P (Off)
The mode guides are displayed.
The mode guides are not displayed.
191
Perform Pixel Mapping
Pixel Mapping is a function for mapping out and correcting for defective pixels in
the CCD sensor. Run the Pixel Mapping function if image dots always seem to be
defective in the same place.
• Pixel Mapping is only accessible from A mode. Pixel Mapping cannot be
selected even if the [W Setting] menu is displayed by pressing the 3
button in Q mode.
• When executing Pixel Mapping from Q mode, press the Q button once
to enter A mode. Then press the 3 button and the four-way controller
(5) to display the [W Setting] menu and select Pixel Mapping.
• Pixel Mapping cannot be selected in O (Voice Recording) mode.
1
2
3
Use the four-way controller (23) to select [Pixel Mapping] on
the [W Setting] menu.
Press the four-way controller (5).
The [Pixel Mapping] screen appears.
Use the four-way controller (2) to
select [Pixel Mapping].
Checks the image sensor
and corrects defective
pixels
Pixel Mapping
Cancel
7
Settings
192
Pixel Mapping
OK
4
OK
Press the 4 button.
Defective pixels are mapped and corrected.
When the battery level is low, [Not enough battery power remaining to
activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit
K-AC117 (optional) or use a battery with ample capacity remaining.
Changing the Start-up Screen
You can choose the start-up screen displayed when the camera is turned on.
You can choose any of the following images as the start-up screen:
• The Guide Display Start-up Screen showing a guide for the shooting modes
and buttons
• One of the 3 pre-installed screens
• One of your own images (compatible images only)
1
2
3
4
Use the four-way controller (2345) to select ^ (Start-up
Screen) from the Playback Mode Palette.
Press the 4 button.
The image selection screen appears.
Use the four-way controller (45)
to choose the image for the startup screen.
Only images available for the start-up
screen are displayed. You can also choose
one of the 3 pre-installed screens or the
Guide Display Start-up Screen already
stored in the camera.
100 - 0017
MENU
Cancel
OK
OK
Press the 4 button.
The setting is saved.
7
Settings
• Once the start-up screen has been set, it will not be deleted even if the
original image is deleted or the SD Memory Card or built-in memory is
formatted. However the image is deleted if you change the start-up screen
after deleting the recorded image or formatting the memory.
• The start-up screen is not displayed when set to [Off].
• The start-up screen is not displayed when you turn the camera on in
playback mode.
• Movies or images taken at F (Digital Panorama) mode cannot be used
for the start-up screen.
193
Resetting to Default Settings (Reset)
You can reset the camera settings to their defaults. Refer to “Default Settings”
(p.227) for the reset settings.
1
2
3
Use the four-way controller (23) to select [Reset] on the
[W Setting] menu.
Press the four-way controller (5).
The [Reset] screen appears.
Use the four-way controller (2) to
select [Reset].
Reset
Returns to default
settings
Reset
Cancel
OK
4
OK
Press the 4 button.
The settings return to the defaults.
Setting the Startup Shortcut
7
You can start a function by pressing a button other than power switch when the
camera is off.
Settings
Playback Mode
LED Lighting
Clock Display
1
2
When [Playback Mode] is on, you can turn on the camera by
pressing and holding down the Q button.
When [LED Lighting] is on, you can turn on the LED Macro
Lights by pressing and holding down the Green button.
When [Clock Display] is on, you can display the clock on the
display by pressing and holding down the 4 button.
Use the four-way controller (23) to select [Startup Shortcut]
on the [W Setting] menu.
Press the four-way controller (5).
The [Startup Shortcut] screen appears.
194
3
Use the four-way controller (23)
to select an item.
Startup Shortcut
Playback Mode
LED Lighting
Clock Display
MENU
4
Use the four-way controller (45) to switch between O (On)/
P (Off).
O (On)
P (Off)
The startup shortcut is available
The startup shortcut is not available
The default settings are all O (On).
Displaying the Clock Display
You can use the camera as a clock. With the camera turned off, press and hold
down the 4 button to display the clock on the display.
1
Press and hold down the 4
button.
7
Settings
The camera turns on and the clock appears
on the screen.
The camera turns off automatically after
approximately 10 seconds.
Pressing the power switch turns the
camera off immediately.
Not to function the clock display by pressing 4 button, set [Clock Display]
to P (Off) on [Startup Shortcut] from [W Setting] menu. (p.194)
195
Light up the LED
You can use the camera as a light. Pressing and holding down the Green button
lights up the LED Macro Lights when the camera is turned off.
1
Press and hold down the Green button.
The LED light up. The LED turn off automatically after the period you have set
on [Auto Power Off].
Pressing the power switch turns the camera off immediately.
• Not to light up the LED by pressing the Green button, set [LED Lighting] to
P (Off) on [Startup Shortcut] from [W Setting] menu (p.194).
• When the [Auto Power Off] is set to [Off], the LED do not turn off
automatically.
• Press the power switch to turn off the LED.
7
Settings
196
8Connecting to a
Computer
Setting Up Your Computer
By installing the software included on the provided CD-ROM on your computer
and connecting the camera to your computer with the USB cable, you can transfer
images and movies captured with your camera to the computer and then display
and manage them. This section explains how to install the provided software and
the other necessary preparations for enjoying the captured images and movies
on your computer.
Provided Software
The following software is included on the provided CD-ROM.
Windows
• Image viewing/managing/editing software “MediaImpression 3.5 for
PENTAX”
Macintosh
• Image viewing/managing/editing software “MediaImpression 2.1 for
PENTAX”
(Applicable languages: English, French, German, Spanish, Portuguese,
Italian, Dutch, Swedish, Russian, Chinese [traditional and simplified],
Korean, and Japanese)
We recommend using the optional AC adapter kit K-AC117 when the camera
is connected to a computer (p.37). If the battery runs out of power while
images are being transmitted to a computer, the data may be lost or
damaged.
8
Connecting to a Computer
197
System Requirements
The following system requirements must be met for you to fully enjoy the images
and movies captured with the camera on your computer.
* The following lists the minimum system requirements for playing back and
editing movies. Operation is not guaranteed on all computers meeting the
system requirements.
Windows
OS
CPU
Memory
Hard Disk Space
Monitor
Others
Windows XP SP3, Windows Vista or Windows 7
• The OS must be preinstalled and updated to the latest
version.
Pentium 4 1.6 GHz or equivalent AMD Athlon (Intel Core 2 Duo
2.0 GHz or equivalent AMD Athlon X2 processor or above
recommended)
512 MB minimum (1 GB or more recommended)
300 MB minimum
1024 × 768 pixels, 16-bit color monitor or higher
CD-ROM/DVD drive
USB port as standard equipment
Windows 95, Windows 98, Windows 98SE, Windows Me, Windows NT and
Windows 2000 are not supported.
Macintosh
8
Connecting to a Computer
198
OS
CPU
Memory
Hard Disk Space
Monitor
Others
Mac OS X (Ver.10.4, 10.5, 10.6 10.7)
• The OS must be preinstalled and updated to the latest
version.
PowerPC G4 800 MHz processor or equivalent (Intel Core Duo
processor or above recommended)
512 MB minimum (1 GB or more recommended)
300 MB minimum
1024 × 768 pixels, 16-bit color monitor or higher
CD-ROM/DVD drive
USB port as standard equipment
* The movie edited with “MediaImpression 2.1 for PENTAX” cannot be saved as
MPEG-4 AVC/H.264 format.
Installing the Software
Windows
Install the image viewing/managing/editing software (MediaImpression 3.5 for
PENTAX).
• Make sure your Windows PC meets the system requirements before
installing the software.
• When multiple accounts have been set up, log on with an account that has
administrative rights before installing the software.
1
2
Turn your Windows PC on.
Insert the CD-ROM into the CD-ROM/DVD drive.
[Auto play] screen appears.
Click [PENTAX Software Installer], and then click [Yes].
If the installer screen does not appear
Display the installer screen following the steps below.
1) Double-click [My Computer] on the desktop.
2) Double-click the [CD-ROM/DVD drive] icon.
If you are using Windows XP
The “MediaImpression 3.5 for PENTAX” installer screen appears.
3
Click [ArcSoft].
The “Choose Setup Language” screen
appears.
8
Choose a language, and click
[OK].
The setup screen appears.
Follow the on-screen guidance to install the
software.
Connecting to a Computer
4
199
5
Click [Finish].
“MediaImpression 3.5 for PENTAX”
installation is complete.
6
Click [Exit] on the installation screen.
The window closes.
Macintosh
Install the image viewing/managing/editing software (MediaImpression 2.1 for
PENTAX).
1
2
3
4
5
8
Connecting to a Computer
200
Turn your Macintosh on.
Insert the CD-ROM into the CD-ROM/DVD drive.
Double-click the CD-ROM icon.
Double-click the [Pentax Software Installer] icon.
The “MediaImpression 2.1 for PENTAX” installer screen appears.
Click [ArcSoft].
The setup screen appears.
Follow the on-screen guidance to install the
software.
6
Click [Close].
“MediaImpression 2.1 for PENTAX”
installation is complete.
7
Click [Exit] on the installation screen.
The window closes.
Product Registration on the Internet
In order to better serve you, we request that you complete the product
registration.
If your computer is connected to the Internet,
please click [Product Registration] on the setup
screen after the language selection screen is
displayed.
The world map screen shown on the right for
Internet Product Registration is displayed. Click
the displayed country or region and then follow
the instructions to register your product.
Only customers in countries and regions
displayed on the software installation screen can register their products on the
Internet Product Registration.
8
Connecting to a Computer
201
Setting the USB Connection Mode
Set the device to which the camera is connected with the USB cable.
Make sure to set the USB connection mode before connecting your camera
to the computer. You cannot perform the following setting if the camera is
already connected to your computer with the USB cable.
1
2
3
4
Turn your camera on.
Use the four-way controller (23) to select [USB Connection]
on the [W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23)
to select [MSC].
2/4
Setting
Folder Name
File Name
USB Connection
Video Out
HDMI Out
Date
IMGP
MSC
PTP
Auto
Eye- Fi
MENU Cancel
5
Press the 4 button.
The setting is saved.
Proceed to the following pages depending on your computer.
8
Connecting to a Computer
202
Connecting to a Windows PC 1 p.204
Connecting to a Macintosh 1 p.212
OK
OK
MSC and PTP
MSC (Mass Storage Class)
A general-purpose driver program that handles devices connected to the
computer via USB as a memory device. Also indicates a standard for controlling
USB devices with this driver.
By simply connecting a device that supports USB Mass Storage Class, you can
copy, read, and write files from a computer without installing a dedicated driver.
PTP (Picture Transfer Protocol)
A protocol that allows transfer of digital images and control of digital cameras via
USB, standardized as ISO 15740.
You can transfer image data between devices that support PTP without installing
a device driver.
Unless otherwise specified, select MSC when connecting the camera to your
computer.
8
Connecting to a Computer
203
Connecting to a Windows PC
Connecting the Camera and Your Windows PC
Connect your camera to the Windows PC using the provided USB cable.
1
2
3
Turn your Windows PC on.
Turn your camera off.
Connect your camera to the Windows PC using the USB
cable.
Connect the terminal of the USB cable with arrow mark
of the camera.
8
Connecting to a Computer
204
4
facing the front side
Turn your camera on.
The “AutoPlay” screen appears.
If the “AutoPlay” screen does not appear, follow the steps in “When the
“AutoPlay” Screen Does Not Appear” (p.206).
We recommend using the optional AC adapter kit K-AC117 when the camera
is connected to the computer (p.37). If the battery runs out of power while
images are being transmitted to the computer, the image data may be lost or
damaged.
The power lamp is lit while the camera is connected to a PC, and it blinks
while the card is being accessed.
Transferring Images
Transfer the images captured with the camera to your Windows PC.
If there is no SD Memory Card in the camera, the images stored in the builtin memory will be transferred to your Windows PC.
5
Click [Import media files to local
disk].
The “MediaImpression 3.5 for PENTAX”
starts.
6
Select an image to import.
To select multiple images, choose the
images while pressing the Ctrl key.
To specify the destination location, click the
folder icon at [Destination Folder].
7
Click [Import].
8
Connecting to a Computer
A message appears indicating that import is
complete.
An arrow mark appears on the imported
image.
205
When the “AutoPlay” Screen Does Not Appear
5
6
7
Double-click the
[MediaImpression 3.5 for PENTAX]
icon on the desktop.
Click [PhotoImpression].
Click the icon of connected
camera at the upper left on the
screen.
The import screen appears. For the following
procedures, proceed to step 6 on p.205.
8
Connecting to a Computer
206
Images are stored in folders named by the shooting date (“XXX_0808” for
August 8. “XXX” is a three-digit folder number.).
If [PENTX] is selected for [Folder Name] in the [W Setting] menu, a folder
named “XXXPENTX” (XXX is a three-digit folder number) is displayed. If
[_USER] is selected for [Folder Name], “xxxAAAAA” (xxx is a three-digit
folder number, AAAAA is the 5-digit letters that you entered) is displayed. The
images are stored there.
Disconnecting the Camera from Your Windows PC
1
2
3
Click the
[Safely Remove
Hardware] icon in the task bar.
Click [Eject xxx (name of the
camera)].
A message appears indicating that the
hardware can be safely removed.
Disconnect the USB cable from
your Windows PC and the camera.
• If the camera (removable disk) is being used by an application such as
“MediaImpression 3.5 for PENTAX”, the camera cannot be disconnected
until the application is closed.
• The camera will automatically switch to the playback mode when the USB
cable is disconnected from your Windows PC or the camera.
8
Connecting to a Computer
207
Starting “MediaImpression 3.5 for PENTAX”
“MediaImpression 3.5 for PENTAX” lets you view, edit, manage, search for,
share, and print images.
1
Double-click the [MediaImpression 3.5 for PENTAX] icon on
the desktop.
“MediaImpression 3.5 for PENTAX” starts and the main window appears.
Media Window Interface
A
B
* The screen shown is an example with the default settings.
8
Connecting to a Computer
208
A PhotoImpression
You can view or manage still pictures. For example, you can import, edit and print
still pictures.
B VideoImpression
You can view or manage movies. For example, you can import and edit movies.
Media Browser Interface
A
B
C
D
* The screen shown is an example with the default settings.
A Views
Displays the configuration of folders or groups sorted by your favorites, GPS
information or a detected person.
B Preview Area
Displays the contents of the selected folder or sorted group.
C Properties
Displays the information of the selected image, detects people or displays the
map of the location at which the image was shot (only for images with GPS
information).
8
Connecting to a Computer
D Actions
This panel provides editing/managing functions, such as editing, making movies.
209
Viewing Images
1
2
Click [PhotoImpression] or
[VideoImpression] from the main
window.
Select and click the folder or the
group containing the image you
want to view.
Images are displayed.
3
8
Connecting to a Computer
210
Select and double-click the image
you want to view.
The selected image is displayed with the
viewer.
With the viewer, you can enlarge/reduce the
display size of the image or edit it and so on.
You can also play back movies or sound
files.
Double-click the image to view it at full
screen.
Details on How to Use “MediaImpression 3.5 for
PENTAX”
You can find more information on how to use “MediaImpression 3.5 for PENTAX”
by using the help pages.
1
2
Click [Help] from [Menu] on the menu bar.
The help screen appears.
Click the desired topic.
An explanation is displayed.
8
Connecting to a Computer
211
Connecting to a Macintosh
Connecting the Camera and Your Macintosh
Connect your camera to the Macintosh using the provided USB cable.
1
2
3
Turn your Macintosh on.
Turn your camera off.
Connect your camera to the Macintosh using the USB cable.
Connect the terminal of the USB cable with arrow mark
of the camera.
4
8
Connecting to a Computer
212
facing the front side
Turn your camera on.
The camera is recognized as [NO_NAME] on the desktop.
We recommend using the optional AC adapter kit K-AC117 when the camera
is connected to the computer (p.37). If the battery runs out of power while
images are being transmitted to the computer, the image data may be lost or
damaged.
• If the SD Memory Card has a volume label, the volume label name appears
instead of [NO_NAME]. A new unformatted SD Memory Card may show
the manufacturer’s name or model number.
• The power lamp is lit while the camera is connected to a Macintosh, and it
blinks while the card is being accessed.
Transferring Images
Transfer the images captured with the camera to your Macintosh.
If there is no SD Memory Card in the camera, the images stored in the builtin memory will be transferred to your Macintosh.
5
6
7
8
Double-click the [MediaImpression] folder inside the
[Applications] folder.
Double-click the [MediaImpression 2.1 for PENTAX] icon.
“MediaImpression 2.1 for PENTAX” starts and the main browser window
appears.
Set up [Destination Folder] and
select [Subfolder Name].
Select the image/s you want to
copy, then click [Import].
The selected image/s is copied to the PC.
8
Click [Done].
Connecting to a Computer
9
213
Disconnecting the Camera from Your Macintosh
1
2
Drag [NO_NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name to the
trash.
Disconnect the USB cable from your Macintosh and the
camera.
• If the camera (removable disk) is being used by an application such as
“MediaImpression 2.1 for PENTAX”, the camera cannot be disconnected
until the application is closed.
• The camera will automatically switch to the playback mode when the USB
cable is disconnected from your Macintosh or the camera.
8
Connecting to a Computer
214
Starting “MediaImpression 2.1 for PENTAX”
“MediaImpression 2.1 for PENTAX” lets you view, edit, manage, search for,
share, and print images.
1
2
Double-click the [MediaImpression] folder inside the
[Applications] folder.
Double-click the [MediaImpression 2.1 for PENTAX] icon.
“MediaImpression 2.1 for PENTAX” starts and the main browser window
appears.
Media Window Interface
A
B
* The screen shown is an example with the default settings.
B Edit/Managing tool
You can edit or manage images. For example, you can import, edit or print
images.
Connecting to a Computer
A Media browser tool
You can view images or play back movies, sound files.
8
215
Media Browser Interface
B
A
C
* The screen shown is an example with the default settings.
A Views
Displays the configuration of folders in your computer. When you browse a folder,
the contents of the folder appear in the media thumbnail pane.
B Preview Area
Displays the contents of the selected folder or the results of the most recent
search (the file/s or folder/s that matches the search item).
C Actions
This panel provides editing/managing functions, such as importing, editing,
making movies.
8
Connecting to a Computer
216
Viewing Images
1
2
3
Click [Pictures], [Videos], or [All Media] from the main
window.
Select and click the folder containing the image you want to
view in the folder pane.
Images are displayed in the media thumbnail pane.
Select and double-click the image you want to view in the
media thumbnail pane.
The selected image is displayed with the
viewer.
With the viewer, you can enlarge/reduce the
display size of the image or edit it and so on.
You can also play back movies or sound files.
Details on How to Use “MediaImpression 2.1 for
PENTAX”
You can find more information on how to use “MediaImpression 2.1 for PENTAX”
by using the help pages.
1
The help screen appears.
Click the desired topic.
An explanation is displayed.
8
Connecting to a Computer
2
Select [ArcSoft MediaImpression Help] from [Help] on the
menu bar.
217
Transferring Images Using an Eye-Fi
Card
You can automatically transfer images or movies to a computer or similar devices
via wireless LAN using a memory card that is equipped with the wireless LAN
(Eye-Fi card) function.
1
2
3
4
5
Specify the wireless LAN access point and transfer
destination on the Eye-Fi card.
For details on how to set up the card, refer to the operating manual supplied with
the Eye-Fi card.
Turn the camera off.
Insert the Eye-Fi card that has been set up.
Turn the camera on.
Set [Eye-Fi] in the [W Setting] menu to O (On).
The images are transferred automatically. For details on how to set up the
camera, refer to “Setting the Eye-Fi Communication” (p.189).
The following icons appear on the display.
During Eye-Fi communication. The camera is communicating or
searching for the access point when [Eye-Fi] is set to O (On).
Eye-Fi communication waiting. The camera is not communicating
when [Eye-Fi] is set to O (On).
Eye-Fi communication prohibited. When [Eye-Fi] is set to P (Off).
8
Connecting to a Computer
218
Eye-Fi version error. Version of the Eye-Fi card is out of date or the
card is write-protected.
• Not available for Endless Memory mode.
• Run the latest firmware on your Eye-Fi card.
• When you use a new Eye-Fi card, copy the install file of Eye-Fi Manager
stored on the card to your computer before you format the card.
• Do not use an Eye-Fi card, or set [Eye-Fi] to P (Off) in a location where
wireless LAN devices are restricted or prohibited, such as on planes (since
images are transferred via wireless LAN).
• If you insert an older version Eye-Fi card in the camera, an error message
appears.
• Images are not transferred in the following cases:
-When available wireless LAN access points are not found.
-When the battery level is low (
(yellow) or
(red) is indicated).
• Sound files cannot be transferred.
• We recommend that you use an AC adapter (optional) when you transfer a
large number of images because this often requires long transferring times.
• While images are being transferred, the Auto Power Off does not function.
• If you transfer large-sized files, such as a movie, the temperature inside the
camera increases and the camera may be automatically turned off to
protect the circuit.
• To transfer images via wireless LAN, use of an access point, an Internet
environment, and configuration are required. For details, refer to the
Internet website (http://www.eye.fi/).
• For details on how to use an Eye-Fi card, refer to the operating manual
supplied with the Eye-Fi card.
• If you have a problem with the Eye-Fi card, contact the manufacturer of the
card.
• This camera is equipped with the function that sets Eye-Fi communication
to on or off, however, this does not guarantee availability of all the functions
on the Eye-Fi card.
• Use of the Eye-Fi card is permitted only in the country where you
purchased the card. Follow the laws of that country.
8
Connecting to a Computer
219
Functions Available for Each Shooting
Mode
√: Can be set.
9
Appendix
220
⎯: Settings and changes are not applied.
×: Cannot be set.
Shooting Mode
Function
Zoom button Zoom operation
Face Detection On
Smile Capture
I button Self-portrait Assist / Self-portrait
Assist + Smile Capture
Face Detection Off
, Auto
a Flash Off
Flash Mode b Flash On
c Auto + Red-eye
d Flash On + Red-eye
9 Standard
gZ Self-timer
Continuous Shooting/
Drive Mode jc
Burst Shooting
hi Remote Control
l Auto Bracketing
= Standard
q Macro
1cm Macro
Focus Mode
3 Pan Focus
s Infinity
z Manual Focus
Image Tone
Recorded Pixels
Quality Level
White Balance
Focusing Area
AF
Auto Macro
Setting
Focus Assist
AE Metering
Sensitivity
[A Rec.
AUTO ISO Range
Mode] menu
EV Compensation
D-Range Setting
Pixel Track SR*1
Blink Detection
Sharpness/Saturation (Tone
Adjustment)/Contrast
Date Imprint
IQ Enhancer
Macro Light
9Appendix
b A A
√*2
√
√
√
√
√
√
√
√
abB
\UK
C
√
√
√
√*30 √*30 √*30 √*30
√*3
√
√
√
√
√
√*3
√
√
√
√
√
×
√*30
×
√*30
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
√
√
×
√
√
√
√
×
√
×
×
×
×
×
√
×
√
×
×
×
√
√
√
√
√
√
√
√
√
√
√
×
√
×
×
×
√
√
√
√
√
√
√
√
√
√
×
√
×
×
×
√
×
√
√
×
√
√
√
√
√
√
×*8
√
√
×*19
×*20
√
√
×*23
√
√
×*28
×*7
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√*9
×*22
√
√
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×*8
√
√
×*19
√
√
√
×*23
√
√
√
√
√
√
√
×
√
√
√
√
√
√
×*8
√*10
×*17
×*19
√*21
√
×
×*23
×*24
×*26
√
√
√
−
√
√
√
√
√
√
√
√
×*8
√
√
×*19
√
√
√
×*23
√
√
√
√
√
√
×*29 ×*29
×*29
√*10
×*17
√
√*21
√
×
×*23
×*24
×*26
√
√
√
−
×*29
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×*7
√
−
√
√
√
√
√
−
√
√
√
√
√
cR
B
X c
√
√
×
√*3
√
×
√*3
√
√
√*30
√*31
√*31
×
√
√
√
√
√
√
√
√
√
√
√
√
√
×
×
√
×
√
×
×
×
×
×
√
×
√
√
√
√
√
√
√
√
×*8
√
√
×*19
√
√
√
×*23
√
√
√
√
√
√
×
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×*7
√
e
S
F
N
9
√*4
×
×
×
√
√
√
√
√
√
√
√
√
√
×
√
√
√
√
√
√
√
√
√
√*5
√
√
√*6
√
√
×
×
×
√*30
√*30
×
√*30
×
√*30
×
√*30
√
×
√
×
×
×
√
√
×*7
×
√
×
×
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
√
√
√
√
√
√
√
√
×
√
×
×
×
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×
×
×
√
√
×
×
×
×
√
√
√
×
×
×
√
×
×
×
√
√
√
√
√
×
√
×
√
×
√
√
√
√
√
√
√
√
×
×
×
√
×
×
×
√
√
×
√
√
×
√
√
√
√
×*24
×*27
√
√
×*7
√
√
×
×
×
×
×
√
×
×*8
√
√
×*19
×*20
×
×
×*23
×*25
−
√
√
×*7
√
√
√
√
√
√
√
√
√
√
×*12
√
√
√
√
√
√
√
√
√
√
×*7
√
√
√
√
√
√
√
√
√
×*8
√
√
×*19
√
√
√
×*23
√
√
√
√
√
√
√
×
√
√
√
√
√
√
√
×*11
√
√
√
×
√
√
√
√
√
√
√
×*7
√
√
√
√
√
√
√
√
×*8
√
√
×*19
√
√
√
×*23
√
√
√
√
√
√
√
×
√
√
√
√
√
√
√
×*32
×*17
√
√*21
√
×
×*23
×*24
×*26
√
√
×*7
−
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√*13
√
√
√
√
√
√
√
√
√
√
×*7
√
×*14
√
√
√*21
√
√
√
√
√
√
√
×*7
√
×*15
√
×*19
√
√
√
×*23
√
×*27
√
√
√
√
×
×
√
√
×
√
×
×
×*8
×*16
×*18
×*19
×*20
×*22
×*22
×*23
×*24
−
×*28
×*7
×*7
×*22
×*17
√
√*21
√
×
×*23
×*24
×*26
√
√
×*7
−
×*29
√
√
√
√
√
√
×*29
×*29
×*29
√
√
×*29
×*29
√
√
√
√
√
√
−
√
√
−
√
√
√
√
√
×*7
√
√
√
√
√
√
√
√
√
√
√
√
√
√
×*7
√
√
√
√
√
√
√
×*7
×*22
×*7
×*22
9
Appendix
√
√
√
Q
221
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10
*11
*12
*13
9
Appendix
222
Movie SR is used for movies, while
Pixel Track SR is used for still pictures.
Flowers cannot be detected when
using digital zoom or Intelligent Zoom.
Before shooting only optical zoom and
digital zoom are available, during
shooting only digital zoom is available.
Only optical zoom and Intelligent
Zoom are available, digital zoom is not
available.
Only optical zoom is available, digital
zoom and Intelligent Zoom are not
available.
Only optical zoom and digital zoom are
available, Intelligent Zoom is not
available.
Fixed to P (Off)
Fixed at Bright
Only Shadow Correction is available.
Set in [C Movie] menu
Fixed to h
Fixed to h for individual pictures,
and fixed to f for composite images.
Fixed to i for individual pictures,
and fixed to f for composite 3
images.
*14
*15
*16
*17
*18
*19
*20
*21
*22
*23
*24
*25
*26
*27
*28
*29
*30
*31
*32
Fixed to h/h
Fixed to V
Fixed to
Fixed to C (Best) equivalent
Fixed to D (Better)
Fixed to F
Fixed to J (Multi)
W (Automatic Tracking AF) is not
available
Fixed to O (On)
Fixed to L (Multi-segment metering)
Fixed to AUTO
The sensitivity is fixed at its minimum
setting
Fixed at 125-800
Fixed at 125-6400
Fixed at ±0.0
Fixed as normal
Not available when the Macro Light is
O (On)
Only Self-portrait Assist is available.
Fixed to m
Messages
Messages such as the following may appear on the display during camera
operation.
Message
Battery depleted
Memory card full
The card memory is not
enough to copy images/
sounds
Memory card error
The built-in memory is
not formatted
Card is not formatted
Card is locked
Compression error
No image/sound
Movie recording stopped
Deleting
Image folder cannot be
created
Protected
9
Appendix
Camera cannot play this
image and sound
Description
The battery is exhausted. Charge the battery using the
battery charger (p.33).
The SD Memory Card is full and no more images can be
saved.
Insert a new SD Memory Card or delete unwanted images.
(p.39, p.135)
Change the recorded pixels or quality level of recorded
images and try again (p.143).
Shooting and playback are impossible due to a problem
with the SD Memory Card. You may be able to display or
copy the images on the card using a computer.
The data within the built-in memory are damaged. Format
the built-in memory.
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
not compatible with this camera. Format the SD Memory
Card in the camera (p.174).
The SD Memory Card is write-protected (p.7).
This message occurs when the camera fails to compress an
image. Change the quality level or recorded pixels of the
image and try shooting or saving it again.
There are no image or sound files on the SD Memory Card
or the built-in memory.
This message appears when the internal temperature of the
camera has exceeded normal operating limits while
recording a movie.
This message appears when deleting an image or sound
file.
You are trying to play back an image or sound in a format
not supported by this camera. You may be able to play it
back on another brand of camera or on your computer.
The largest file number (9999) has been assigned to an
image in the largest folder number (999) and no more
images can be saved. Insert a new SD Memory Card or
format the card/built-in memory (p.174).
The image or sound file you are trying to delete is protected.
223
Message
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
Not enough battery
power remaining to
activate Pixel Mapping
No more images can be
selected
The camera will turn off
to prevent damage from
overheating
Not enough battery
power remaining to
complete the requested
operation
9
Appendix
224
Description
Displayed when you try to switch to Q mode while an
image is still being recorded, or when the protect setting or
DPOF setting is being changed. It disappears after the
image is recorded or the setting is changed.
Displayed when the camera takes more than five seconds
to display an image due to image processing, or when the
SD Memory Card or the built-in memory is being formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
Displayed if no SD Memory Card is inserted when “Image/
Sound Copy” is selected from the Playback Mode Palette
and the OK button is pressed.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the battery is too low during Pixel Mapping.
Change the battery (p.34) or use the AC adapter kit
K-AC117 (optional) (p.37).
Displayed when you select more than the maximum
number of images.
Appears when the temperature inside the camera exceeds
the highest limit.
Displayed when the battery does not have enough power
for positioning, recording, saving, or discarding logs.
Troubleshooting
Problem
Cause
The battery is not installed
The camera will
not turn on
The battery is installed
incorrectly
The battery is exhausted
The camera is connected to
a computer
No image appears The camera is connected to
on the display
a TV
The display is set to off.
The brightness level of the
display is set too dark
The display is
hard to see
Power Saving function is on
The flash is charging
The shutter will
not release
The picture is dark The subject is too far away
when using the
in a dark environment, such
flash
as a night scene
9
Appendix
There is no available space
on the SD Memory Card or
in the built-in memory
Recording
Remedy
Check if a battery is installed. If not,
install a battery.
Check orientation of the battery.
Reinsert the battery according to the
+- symbols in the battery
compartment (p.34).
Charge the battery.
The display is off when the camera
is connected to a computer.
The display is off when the camera
is connected to a TV.
Press the 4/W button to
turn the display on.
Adjust the brightness level in
[Brightness Level] in the [W Setting]
menu. (p.189)
When the Power Saving function is
on, the display automatically
darkens after a certain amount of
time. Press a button to return to the
normal brightness level.
Select [Off] in [Power Saving] in the
[W Setting] menu to turn the Power
Saving function off (p.190).
Pictures cannot be taken while the
flash is charging. Wait until charging
is finished.
Insert an SD Memory Card with
available space or delete unwanted
images (p.39, 135).
Wait until recording is finished.
The picture becomes dark if the
subject is too far away. Take
pictures within the specified flash
range.
225
Problem
Cause
The subject is difficult to
focus on with autofocus
The subject is not
in focus
The subject is not in the
focusing area
Remedy
Lock the focus on an object the
same distance away as the subject
(by pressing and holding the shutter
release button halfway), then aim
the camera at your subject and
press the shutter release button fully
(p.62). Or set the focus manually
(p.92).
Locate the desired subject in the
focus frame (focusing area) in the
center of the display. If it is difficult to
do so, first lock the focus on the
desired subject (focus lock), and
then move the camera to
recompose.
Set to , (Auto) or b (Flash On)
(p.90).
The flash mode is set to
a (Flash Off)
The Drive Mode is set to
j (Continuous Shooting),
c (Burst Shooting), or
l (Auto Bracketing);
the Focus Mode is set to
The flash does not s (Infinity); or the Shooting
discharge
Mode is set to d (Movie), The flash does not discharge in
(Underwater Movie),
these modes.
S (Fireworks),
(Digital Microscope),
(Handheld Night
Snap),
(Interval Movie)
or
(High Speed
Movie).
9
Appendix
226
Very occasionally, static electricity may cause camera to malfunction. In this
case, remove the battery and install it again. If the camera is then working
properly, you can continue using the camera.
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is explained
below.
Last Memory Setting
Yes
: The current setting (last memory) is saved when the camera is
turned off.
No
: The setting returns to the default setting when the camera is turned
off.
*
: The setting depends on the [Memory] setting (p.120).
—
: N/A
Reset Setting
Yes
: The setting returns to the default setting with the Reset function
(p.194).
No
: The setting is saved even after reset.
—
: N/A
[A Rec. Mode] Menu Items
Item
Reset
Setting
Page
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.95
p.96
p.97
p.98
p.93
p.94
p.94
p.99
p.100
p.101
p.101
p.102
p.102
p.103
p.104
p.65
p.104
9
Appendix
Image Tone
Recorded Pixels
Quality Level
White Balance
Focusing Area
AF
Auto Macro
Setting
Focus Assist
AE Metering
Sensitivity
AUTO ISO Range
EV Compensation
D-Range Highlight Correction
Setting
Shadow Correction
Pixel Track SR
Blink Detection
Digital Zoom
Instant Review
Last
Default Setting
Memory
(Shooting mode:A)
Setting
Bright
Yes
(4608×2592)
Yes
D (Better)
Yes
F (Auto)
*
J (Multiple)
Yes
O (On)
Yes
O (On)
Yes
L (Multi-segment)
*
AUTO (125-1600)
*
125-1600
*
±0.0
*
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
O (On)
Yes
O (On)
*
O (On)
Yes
227
Item
Face Detection
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
Memory White Balance
Sensitivity
EV Compensation
AE Metering
Digital Zoom
DISPLAY
File No.
Green Button
Sharpness
Saturation
Tone Adjustment
Contrast
Date Imprint
IQ Enhancer
Macro Light
Last
Default Setting
Memory
(Shooting mode:A)
Setting
P (Off)
Yes
O (On)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
P (Off)
Yes
O (On)
Yes
P (Off)
Yes
O (On)
Yes
Green Mode
Yes
G (Normal)
Yes
G (Normal)
Yes
G (B&W)
Yes
G (Normal)
Yes
Off
Yes
O (On)
Yes
P (Off)
Yes
Reset
Setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Page
p.120
p.105
p.108
p.108
p.108
p.109
p.109
p.110
p.110
[C Movie] Menu Items
Item
9
Appendix
228
Recorded Pixels
Movie SR
Default Setting
(1920×1080·30fps)
O (On)
Last
Memory
Setting
Reset
Setting
Page
Yes
Yes
p.115
Yes
Yes
p.116
[W Setting] Menu Items
Reset
Setting
Page
Yes
Yes
Yes
Yes
Yes
Yes
p.175
No
No
No
p.46
p.176
No
Yes
Yes
Yes
p.178
No
No
p.180
No
No
No
No
Yes*1
Yes
Yes
p.182
p.43
p.182
p.183
p.185
p.202
No
p.187
Yes
Yes
p.188
p.189
Yes
p.189
Yes
Yes
Yes
Yes
⎯
⎯
⎯
p.190
p.190
p.191
p.191
p.194
p.137
p.192
9
Appendix
Last
Default Setting Memory
Setting
Operation Volume
3
Yes
Playback Volume
3
Yes
Start-up Sound
Yes
Off
Sound
Shutter Sound
Yes
1
Operation Sound
Yes
1
Self-timer Sound
1
Yes
According to
Date Format (date)
Yes
initial setting
Date Format (time)
24h
Yes
Date
Adjustment Date
1/1/2012
Yes
According to
Time
Yes
initial setting
Alarm
Off
Yes
Alarm
Time
0:00
Yes
Select Time
W Hometown
Yes
According to
Destination (City)
Yes
initial setting
World
Destination (DST)
P (Off)
Yes
Time
According to
Hometown (City)
Yes
initial setting
Hometown (DST)
P (Off)
Yes
Text Size
Standard
Yes
According to
Yes
Language/
initial setting
Folder Name
Date
Yes
File Name
Yes
IMGP
USB Connection
Yes
MSC
According to
Video Out
Yes
initial setting
HDMI Out
Auto
Yes
Eye-Fi
P (Off)
Yes
G
Brightness Level
Yes
(Normal)
Power Saving
5 sec.
Yes
Auto Power Off
3 min.
Yes
Quick Zoom
P (Off)
Yes
Guide Display
O (On)
Yes
Reset
Cancel
⎯
Delete All
Cancel
⎯
Pixel Mapping
Cancel
⎯
Item
229
Item
Startup
Shortcut
Playback Mode
LED Lighting
Clock Display
Format
GPS On/Off
Record
log
GPS*2
GPS
Logging
Last
Default Setting Memory
Setting
O (On)
Yes
O (On)
Yes
O (On)
Yes
Cancel
⎯
Off
Yes
Logging
Interval: 15 sec.
Yes
Logging
Duration: 1 hr.
Save log
Save
data
Discard
Cancel
log data
GPS Time Sync
Off
*1 Except the folder name that you created
*2 Optio WG-2 GPS only
Reset
Setting
Yes
Yes
Yes
⎯
Yes
Page
p.194
p.194
p.194
p.174
Yes
⎯
⎯
⎯
⎯
Yes
Yes
GPS Guide
Playback Mode Palette Items
9
Appendix
230
Item
Default Setting
Interval
Slideshow Screen Effect
Sound Effect
Image Rotation
Small Face Filter
Ink Rubbing Filter
Recorded Pixels
Layout
Collage
Background
Select image(s)
Digital Filter
HDR Filter
Blur
Original
Frame
Edge Composite
Frame Composite
Save as Still Image
Movie
Divide Movies
Editing
Adding title picture
3 sec.
Wipe
O (On)
Normal
Approx. 7%
G (Standard)
h
White
⎯
B&W/Sepia
⎯
All sides/White
All sides/White
Default 1
⎯
⎯
⎯
Last Memory Reset
Page
Setting
Setting
Yes
Yes
Yes
Yes p.129
Yes
Yes
⎯
⎯
p.131
No
No
p.145
No
No
p.148
Yes
Yes
Yes
Yes
p.149
Yes
Yes
⎯
⎯
No
⎯
p.146
⎯
⎯
p.148
No
⎯
p.156
No
⎯
Yes
Yes p.153
⎯
⎯
⎯
⎯
p.160
⎯
⎯
Item
Default Setting
Red-eye Compensation
Recorded Pixels
Resize
Quality Level
Cropping
Image/Sound Copy
Voice Memo
Single Image/
Sound
Protect
All Images/
Sounds
Single Image
DPOF
All Images
Start-up Screen
⎯
Depending on the
picture taken
Depending on the
picture taken
Depending on the
picture taken
Built-in memory →
SD Memory Card
⎯
Depending on the
recorded image/sound
Depending on the
recorded image/sound
Copies: 0
Date: P (Off)
Default 1
Last Memory Reset
Page
Setting
Setting
⎯
⎯
p.152
⎯
⎯
p.143
⎯
⎯
p.143
⎯
⎯
p.144
⎯
⎯
p.163
⎯
⎯
p.171
⎯
⎯
⎯
⎯
⎯
⎯
Yes
⎯
⎯
Yes
p.138
p.165
p.193
Key Operation
Last
Memory
Setting
Reset
Setting
Function
Default Setting
Q button
W/T button
Operation Mode
Q Mode
Full wide-angle
⎯
⎯
⎯
Zoom Position
*
No
2
Drive Mode
9 (Standard)
*
Yes
p.63
p.81 p.84
3
Shooting Mode
b (Auto Picture)
Yes
Yes
p.65
4
Flash Mode
, (Auto)
*
Yes
p.90
5
Focus Mode
*
Yes
p.91
3 button
Menu Display
= (Standard)
Shooting mode:
[A Rec. Mode] menu
Playback mode:
[W Setting] menu
⎯
⎯
p.53
4/W
button
Information
Display
Standard
*
Yes
p.25
I button
Operation Mode
Face Detection
On
*
Yes
p.69
Green Button
Function Recall
Green Mode
Yes
Yes
p.73
Four-way
controller
Page
9
Appendix
Item
231
List of World Time Cities
City: indicates cities that can be set as either the Initial Setting (p.43) or the World
Time (p.180).
Video Output Format: indicates the video output format of the city set as the
Initial Setting.
Region
North
America
Central and
South
America
City name
Video output
format
Region
Africa/West
Asia
City name
NTSC
Anchorage
NTSC
Cairo
PAL
Vancouver
NTSC
Jerusalem
PAL
San Francisco
Los Angeles
NTSC
NTSC
Nairobi
Jeddah
PAL
PAL
Calgary
NTSC
Tehran
PAL
Denver
NTSC
Dubai
PAL
Chicago
NTSC
Karachi
PAL
Miami
NTSC
Kabul
PAL
Toronto
New York
NTSC
NTSC
Male
Delhi
PAL
PAL
Halifax
NTSC
Colombo
PAL
Mexico City
NTSC
Kathmandu
PAL
Lima
NTSC
Dacca
PAL
Santiago
NTSC
Yangon
NTSC
Caracas
NTSC
Bangkok
PAL
Buenos Aires
Sao Paulo
PAL
PAL
Kuala Lumpur
Vientiane
PAL
PAL
East Asia
Istanbul
Video output
format
Honolulu
PAL
Rio de Janeiro
NTSC
Singapore
PAL
Lisbon
PAL
Phnom Penh
PAL
Madrid
PAL
Ho Chi Minh
PAL
London
PAL
Jakarta
PAL
Paris
Amsterdam
PAL
PAL
Hong Kong
Beijing
PAL
PAL
Milan
PAL
Shanghai
PAL
Rome
PAL
Manila
NTSC
9
Copenhagen
PAL
Taipei
NTSC
Berlin
PAL
Seoul
NTSC
Appendix
Prague
Stockholm
PAL
PAL
Tokyo
Guam
NTSC
NTSC
Europe
Africa/West
Asia
232
Budapest
PAL
Perth
PAL
Warsaw
PAL
Oceania
Adelaide
PAL
Athens
PAL
Sydney
PAL
Helsinki
PAL
Noumea
PAL
Moscow
Dakar
PAL
PAL
Wellington
Auckland
PAL
PAL
Algiers
PAL
Pago Pago
NTSC
Johannesburg
PAL
Optional Accessories
A number of dedicated accessories are available for this camera. Products
marked with an asterisk (*) are the same as those supplied with the camera.
Power supply
Rechargeable lithium-ion battery D-LI92 (*)
Battery charger kit K-BC92 (*)
(Battery charger D-BC92, AC plug cord)
AC adapter kit K-AC117
(AC adapter D-AC115, DC coupler D-DC92, AC plug cord)
The battery charger and AC adapter are only sold as a set.
Cable
USB cable I-USB7 (*)
AV cable I-AVC7
Strap
O-ST124 (*)
O-ST125 (*)
O-ST24
Genuine leather strap.
O-ST8
Silver chain strap.
O-ST81
Waterproof strap.
Camera case
O-CC118
Remote Control
REMOTE CONTROL WATERPROOF O-RC1
REMOTE CONTROL E
9
Appendix
REMOTE CONTROL F
233
Main Specifications
Type
Number of Effective
Pixels
Image Sensor
Digital compact camera
Approx. 16 megapixels
1/2.3 inch CMOS
Number of Recorded Still
Pixels
Sensitivity
File Format
Quality Level
Storage Media
9
Appendix
234
(4608×3456),
(3456×3456),
(4608×2592), 6 (3072×2304),
(3072×1728), f (2592×1944),
(2592×1464), h (2048×1536), h (1920×1080),
l (1024×768), m (640×480)
* Fixed at h/h in Frame Composite mode.
* Fixed at f in Digital Wide mode, however, the first frame uses h.
* Fixed at i for one frame in Digital Panorama mode.
* Fixed at h in Digital Microscope mode.
* Fixed at f/
in Burst Shooting mode.
* Fixed at V (1280×960) in Report mode.
Movie
(1920×1080·30fps),
(1280×720·60fps)
M (1280×720/30 fps),G (640×480/30 fps)
AUTO, Manual (ISO 125, 200, 400, 800, 1600, 3200, 6400)
* The sensitivity is fixed at AUTO (125-6400) in Digital SR mode.
Still
JPEG (Exif 2.3), DCF 2.0, DPOF,
PRINT Image Matching III
Movie MPEG-4 AVC/H.264, approx. 60 fps/30 fps, PCM system,
monaural sound, Movie SR (Movie Shake Reduction)
Sound Voice memo, Voice recording: WAVE (PCM) system,
monaural
Still
C “Best”, D “Better”, E “Good”
Movie Fixed at C (Best) *Unchangeable
Built-in memory (approx. 88.2 MB), SD Memory Card, SDHC Memory
Card, SDXC Memory Card
Approximate Image Storage Capacity and Recording Time
Still
Built-in Memory
(4608×3456)
(3456×3456)
(4608×2592)
6
(3072×2304)
(3072×1728)
f
(2592×1944)
(2592×1464)
h
(2048×1536)
h (1920×1080)
V
(1280×960)
l
(1024×768)
m
(640×480)
C
17
pictures
20
pictures
20
pictures
30
pictures
35
pictures
35
pictures
47
pictures
55
pictures
81
pictures
128
pictures
194
pictures
403
pictures
D
30
pictures
39
pictures
39
pictures
55
pictures
68
pictures
68
pictures
89
pictures
110
pictures
148
pictures
235
pictures
332
pictures
627
pictures
E
49
pictures
60
pictures
60
pictures
89
pictures
99
pictures
99
pictures
128
pictures
161
pictures
217
pictures
332
pictures
434
pictures
706
pictures
2 GB
SD Memory Card
C
D
E
370
653
1078
pictures pictures pictures
435
853
1307
pictures pictures pictures
435
853
1307
pictures pictures pictures
653
1205
1921
pictures pictures pictures
778
1499
2119
pictures pictures pictures
778
1499
2119
pictures pictures pictures
1921
2794
1024
pictures pictures pictures
1205
2364
3415
pictures pictures pictures
1756
3235
4728
pictures pictures pictures
2794
5122
6830
pictures pictures pictures
4098
6830
8782
pictures pictures pictures
8782
12294
15368
pictures pictures pictures
• The image storage capacity is for reference only. The actual image storage capacity
may vary depending on the SD Memory Card and the subject.
• V (1280×960) can only be set for recorded pixels when
(Report) mode is set.
Movie/Sound
9
(1920×1080/30 fps)
(1280×720/60 fps)
M (1280×720/30 fps)
G (640×480/30 fps)
Sound
44 sec.
44 sec.
1 min. 12 sec.
3 min. 7 sec.
24 min. 5 sec.
2 GB
SD Memory Card
16 min. 59 sec.
16 min. 42 sec.
27 min. 24 sec.
1 hr. 10 min. 58 sec.
8 hr. 44 min. 34 sec.
Appendix
Built-in Memory
235
• The above figures are based on our standard shooting conditions and may vary
depending on the subject, shooting conditions and type of the SD Memory Card
used.
• The maximum length of continuous recording time for a movie is 25 minutes.
White Balance
Auto, Daylight, Shade, Tungsten Light, Fluores. Light, Manual
Lens
Focal Length
5.0 - 25.0 mm
(approx. 28 mm - 140 mm in 35 mm equivalent
focal length)
Aperture
F3.5 (W) - F5.5 (T)
Lens Composition 11 elements in 9 groups (5 aspherical elements)
Zoom Type
5×
Intelligent Zoom
6/
: approx. 7.5×, f/
:approx. 8.9×,
h: approx. 11.3×, h: approx. 12×, l: approx. 22.5×,
m: approx. 36× (when combined with optical zoom)
Digital Zoom
Max. approx. 7.2× (combines with 5× optical zoom to give zoom
magnification equivalent to 36×)
Motion Blur Reduction Still
Movie
Electronic Shake Reduction (Pixel Track SR),
Hi-sensitivity Shake Reduction (Digital SR)
Electronic Movie Shake Reduction (Movie SR)
Display
3.0 inch wide-LCD, Wide viewing angle, approx. 460,000 dots (AR
coating (cover only))
Playback Modes
Single-frame, 6-frame, 12-frame, Enlargement (max. 10×, scrollable),
Face close-up playback, Pet close-up playback, Folder Display,
Calendar Display, Sound Playback, Histogram Display, Bright and
Dark Area Compensation, Select & Delete, Slideshow, Resize,
Cropping, Image/Sound Copy, Image Rotation, Digital Filter, HDR
Filter, Original Frame, Ink Rubbing Filter, Collage, Small Face Filter,
Movie Playback/Edit (Save as Still image, Divide, Adding title picture),
Frame Composite, Red-eye Compensation, Voice Memo, Protect,
DPOF, Start-up Screen
Focus Mode
Autofocus, Macro, 1cm Macro, Pan Focus, Infinity, Manual Focus
Focus
Type
TTL contrast detection system by sensor
Multiple (9-point autofocus)/spot/automatic
tracking AF changeable
Focus range
(From lens face)
Standard
: 0.5 m - ∞ (Full zoom range)
Macro
: 0.1 m - 0.6 m (Full zoom range)
1cm Macro : 0.01 m - 0.3 m (At the intermediate
position of the zoom range)
* It is possible to switch to Infinity, Pan Focus and
Manual Focus.
* Face Detection AF is available only when the
camera recognizes the subject’s face.
Focus Lock
By half-pressing the shutter release button
9
Appendix
236
Electrically driven
Optical Zoom
Exposure Control
AE Metering
Multi-segment metering, Center-weighted
metering, Spot metering
Face Detection
Detection of up to 32 people’s faces (up to 31 face detection frames
on the display), Smile Capture, Blink Detection, Self-portrait Assist,
Self-portrait Assist + Smile Capture
* Face Detection AE is available only when the camera detects the
subject’s face.
Pet Detection
Registering: 3, Detecting: 1
Shooting Mode
Auto Picture, Program, Night Scene, Movie, Underwater Movie, High
Speed Movie, Interval Movie, Digital Microscope, Landscape, Flower,
Portrait, Underwater, Interval Shot, Handheld Night Snap, Digital SR,
Surf & Snow, Kids, Pet, Sport, Candlelight, Fireworks, Night Scene
Portrait, Text, Food, Digital Wide, Digital Panorama, Frame
Composite, Report, Green Mode, Voice Recording (can be used
when Fn Setting assigned)
Digital Filter
B&W/Sepia, Toy Camera, Retro, Color (red, pink, purple, blue, green,
yellow), Extract Color (red, green, blue), Color Emphasis (Sky Blue,
Fresh Green, Delicate Pink, Autumn Leaves), High Contrast,
Starburst (Cross, Heart, Star), Soft, Fish-eye, Brightness, Miniature
Movie
Continuous
Recording Time
Shutter Speed
1/4000 sec. - 1/4 sec. (mechanical and electronic shutter), max. 4 sec.
(Night Scene mode)
Built-in Flash
Modes
Auto, Flash Off, Flash On, Auto + Red-eye, Flash
On + Red-eye
Flash Range
Wide-angle: approx. 0.2 m - 5.5 m
(approx. 0.66 ft - 18 ft) (Sensitivity: in Auto condition)
Telephoto: approx. 0.2 m - 3.5 m
(approx. 0.66 ft - 11 ft) (Sensitivity: in Auto condition)
EV Compensation ±2 EV (can be set in 1/3 EV steps)
Approx. 1 second - 25 minutes (however, only until the
built-in memory or SD Memory Card is full)
Drive Mode
Single-frame, Self-timer, Continuous Shooting, Burst Shooting,
Remote Control, Auto Bracketing
Self-timer
Electronic control type, control time: Approx. 10 sec., 2 sec.
Time Function
75 cities (28 time zones)
Clock display by holding down 4/W
button while camera is turned off (approx. 10 sec.)
Alarm
Alarm with simultaneous display of the Clock
display at specified time
Rechargeable lithium-ion battery D-LI92, AC adapter kit (optional)
9
Appendix
Power Source
World Time
Clock Display
237
Battery Life
Interfaces
Image Storage
Capacity
Approx. 260
pictures
* Recording capacity shows approximate number
of shots recorded during CIPA-compliant testing
(with display on, flash used for 50% of the shots,
and 23°C or 73.4°F). Actual performance may
vary according to operating conditions.
Playback Time
Approx. 240 min.
* According to the results of in-house testing.
Movie Recording
Time
Approx. 70 min.
* According to the results of in-house testing.
Sound Recording
Time
Approx. 270 min.
* According to the results of in-house testing.
USB 2.0 (high-speed compatible) /PC/AV terminal /
HDMI terminal (Type D (Micro))
Video Output Format NTSC/PAL (monaural)
9
Appendix
238
Waterproof and
Dustproof Rating
JIS waterproof grade 8 and JIS dustproof grade 6 (IP68) Continuous
underwater picture-taking possible for 2 hours at depth of 12 m.
Impact Resistance
Rating
PENTAX drop test (1.5 m height onto a 5 cm thick plywood surface)
complying with MIL-Standard 810F Method 516.5-Shock testing.
* Waterproof performance is not guaranteed if the camera is exposed
to impact such as being dropped or hit.
* The camera is not guaranteed to be free of trouble or damages
under every condition.
Dimensions
Approx. 122.5 (W) × 61.5 (H) × 29.5 (D) mm (excluding operating or
protruding parts)
Weight
Optio WG-2 GPS:
Approx. 177g (excluding battery and SD Memory Card)
Approx. 198g (including battery and SD Memory Card)
Optio WG-2:
Approx. 173g (excluding battery and SD Memory Card)
Approx. 194g (including battery and SD Memory Card)
Accessories
Rechargeable lithium-ion battery, Battery charger, AC plug cord, USB
cable, Software (CD-ROM), Carabiner strap, Macro stand, Operating
Manual, Quick Guide, Utilities Guide for GPS (Optio WG-2 GPS only)
Warranty Policy
All PENTAX cameras purchased through authorized bona fide photographic
distribution channels are guaranteed against defects of material or workmanship for a
period of twelve months from date of purchase. Service will be rendered, and defective
parts will be replaced without cost to you within that period, provided the equipment
does not show evidence of impact, sand or liquid damage, mishandling, tampering,
battery or chemical corrosion, operation contrary to operating instructions, or
modification by an unauthorized repair shop. The manufacturer or its authorized
representatives shall not be liable for any repair or alterations except those made with
its written consent and shall not be liable for damages from delay or loss of use or from
other indirect or consequential damages of any kind, whether caused by defective
material or workmanship or otherwise; and it is expressly agreed that the liability of the
manufacturer or its representatives under all guarantees or warranties, whether
expressed or implied, is strictly limited to the replacement of parts as hereinbefore
provided. No refunds will be made on repairs by non-authorized PENTAX service
facilities.
9
Appendix
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should be
returned to the dealer from whom you purchased the equipment or to the manufacturer.
If there is no representative of the manufacturer in your country, send the equipment to
the manufacturer, with postage prepaid. In this case, it will take a considerable length
of time before the equipment can be returned to you owing to the complicated customs
procedures required. If the equipment is covered by warranty, repairs will be made and
parts replaced free of charge, and the equipment will be returned to you upon
completion of servicing. If the equipment is not covered by warranty, regular charges
of the manufacturer or of its representatives will apply. Shipping charges are to be
borne by the owner. If your PENTAX was purchased outside of the country where you
wish to have it serviced during the warranty period, regular handling and servicing fees
may be charged by the manufacturer’s representatives in that country. Notwithstanding
this, your PENTAX returned to the manufacturer will be serviced free of charge
according to this procedure and warranty policy. In any case, however, shipping
charges and customs clearance fees to be borne by the sender. To prove the date of
your purchase when required, please keep the receipt or bills covering the purchase of
your equipment for at least a year. Before sending your equipment for servicing, please
make sure that you are sending it to the manufacturer’s authorized representatives or
their approved repair shops, unless you are sending it directly to the manufacturer.
Always obtain a quotation for the service charge, and only after you accept the quoted
service charge, instruct the service station to proceed with the servicing.
239
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some
countries can supersede this warranty policy. Therefore, we recommend that
you review the warranty card supplied with your product at the time of
purchase, or contact the PENTAX distributor in your country for more
information and to receive a copy of the warranty policy.
9
Appendix
The CE Mark is a Directive conformity mark of the European Union.
240
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications not approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
9
Appendix
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply. The lithium battery used in this
camera contains perchlorate material, which may require special handling. See
www.dtsc.ca.gov/hazardouswaste/perchlorate
241
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We:
PENTAX RICOH IMAGING AMERICAS
CORPORATION
Located at: 633 17 th Street, Suite 2600,
Denver, Colorado 80202, U.S.A.
Phone: 800-877-0155 Fax: 303-790-1131
Declare under sole responsibility that the product identified herein complies with
47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product
marketed is identical to the representative unit tested and found to be compliant
with the standards. Records maintained continue to reflect the equipment being
produced can be expected to be within the variation accepted, due to quantity
production and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. The above named
party is responsible for ensuring that the equipment complies with the standards
of 47CFR §15.101 to §15.109.
Product Name: Digital Camera
Model Number: Optio WG-2 GPS / Optio WG-2
Contact person: Customer Service Manager
9
Appendix
242
Date and Place: February, 2012, Colorado
Information for Users on Collection and Disposal of Old Equipment
and Used Batteries
1. In the European Union
These symbols on the products, packaging and/or
accompanying documents mean that used electrical
and electronic equipments and batteries should not be
mixed with general household waste.
Used electrical/electronic equipments and batteries
must be treated separately and in accordance with
legislation that requires proper treatment, recovery and
recycling of these products.
By disposing of these products correctly you will help
ensure that the waste undergoes the necessary
treatment, recovery and recycling and thus prevent
potential negative effects on the environment and
human health which could otherwise arise due to
inappropriate waste handling.
If a chemical symbol is added beneath the symbol shown above, in
accordance with the Battery Directive, this indicates that a heavy metal
(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in the battery at a
concentration above an applicable threshold specified in the Battery
Directive.
For more information about collection and recycling of used products,
please contact your local authorities, your waste disposal service or the
point of sale where you purchased the products.
For Switzerland: Used electrical/electronic equipment can be returned
free of charge to the dealer, even when you don’t purchase a new
product. Further collection facilities are listed on the home page of
www.swico.ch or www.sens.ch.
9
Appendix
2. In other countries outside the EU
These symbols are only valid in the European Union. If you wish to
discard used products, please contact your local authorities or dealer
and ask for the correct method of disposal.
243
Index
Symbols
A Mode ................................. 16, 52
I button ................................ 49, 51
Q Mode ................................ 16, 52
Q button ............................... 48, 50
[A Rec. Mode] Menu ........... 55, 227
[C Movie] Menu ................... 57, 228
[W Setting] Menu .................. 57, 229
9 Green Mode ............................. 73
i Delete ............................. 122, 135
f/y button .................................. 50
y Magnify ................................... 132
T Tele ............................................ 63
W Wide .......................................... 63
W/T button ..................................... 48
C Movie ...................................... 113
e Pet ............................................ 74
B Text ...........................................77
X Digital Wide ............................85
F Digital Panorama ....................87
a Landscape ................................67
b Flower .......................................67
Underwater ............................111
Underwater Movie ..................111
K Food .......................................... 68
Report ...................................... 68
Digital Microscope ..................... 77
N Frame Composite ....................78
Handheld Night Snap ............... 67
Interval Shot ............................. 79
Interval Movie ........................116
High Speed Movie ................. 119
Numerics
9
Appendix
244
1cm Macro
................................91
6-Image Display/
12-Image Display ......................... 124
A
AC adapter .................................... 37
Adding sound (Voice Memo) .......171
AE Metering ................................... 99
Alarm ...........................................178
Auto + Red-eye c (Flash) ............. 90
Auto Bracketing a ....................... 84
AUTO ISO Range ........................101
Auto Macro .................................... 94
Auto Power Off ............................190
Auto F (White Balance) .......... 98
Auto , (Flash) ............................... 90
Automatic Tracking AF .................. 93
AV cable ...................................... 141
B
B&W/Sepia filter ..........................146
Basic Mode ....................................73
Battery Level Indicator ................... 36
Blink Detection ...................... 63, 104
Brightness filter ............................146
Brightness Level ..........................189
Built-in Memory ............................163
Burst Shooting ............................... 82
C
Calendar display ..........................126
Camera shake ............................... 64
Capture Mode Palette .................... 67
Changing volume ......................... 175
Charging a battery ......................... 33
Checking the Memory Card ...........41
Clock Display ............................... 195
Collage ........................................ 149
Color emphasis filter ....................146
Color filter .................................... 146
Connecting the Camera to
AV Equipment ..............................140
Connecting to a TV ......................140
Continuous Shooting ..................... 82
Contrast ....................................... 109
Copy ............................................ 163
Cropping ...................................... 144
D
Date Adjustment ................... 46, 176
Date Imprint ................................. 109
Default Settings ........................... 227
Delete all ...................................... 137
Delete i ............................. 122, 135
Digital Filter ..................................146
Digital Microscope Mode ...............77
Digital Wide Mode ......................... 85
Digital zoom ................................... 65
Display brightness ....................... 189
Display Language ........................182
Dividing movies ........................... 161
DPOF settings ............................. 165
D-Range Setting ..........................102
Drive Mode ................ 79, 81, 82, 84
E
EV Compensation ........................101
Extract color filter ......................... 146
Eye-Fi ................................. 189, 218
F
Face Close-up Playback .............. 133
Face Detection ..............................69
File Name .................................... 185
Filters ...........................................146
Fish-eye filter ............................... 146
Flash Mode .................................... 90
Flash Off a (Flash) ....................... 90
Flash On b (Flash) ....................... 90
Flash On + Red-eye d (Flash) ...... 90
Flower ............................................ 67
Focus Assist .................................. 94
Focus Mode ................................... 91
Focusing ........................................ 91
Focusing Area ............................... 93
Folder display ..............................125
Folder Name ................................ 183
Food .............................................. 68
Format .........................................174
Four-way controller ................. 48, 51
Frame Composite ................. 78, 153
Frame Rate .................................. 115
G
Green button ................................ 105
Green button X ...................... 49, 51
Green Mode ................................... 73
Guide Display ................................30
H
I
Image Rotation ............................131
Image Storage Capacity .............. 235
Image Tone ................................... 95
L
Landscape ..................................... 67
Language setting .................. 43, 182
LED lighting ................................. 194
M
Macintosh .................................... 198
Macro q ........................................ 91
Macro Light ..................................110
Magnify y ................................... 132
Manual Focus \ ......................... 91
Manual K (White Balance) ...........99
Mass Storage Class ....................203
MediaImpression ......................... 197
Memory ........................................ 120
3 button ......................... 49, 51
Miniature filter ..............................146
Movie Editing ............................... 160
Movie SR (Movie Shake Reduction)
Function ....................................... 116
MSC .............................................203
Multi-segment metering L ...........99
N
Number of pixels ............................96
O
4/W button ............. 49, 51
Operating the Menus ..................... 53
Optional accessory ......................233
Original Frame ............................. 156
P
Pan Focus 3 ............................... 91
Panoramic Pictures ....................... 87
Pet Mode ....................................... 74
Photo processing lab ................... 165
Picture Transfer Protocol .............203
Pixel Mapping ..............................192
Pixel Track SR ............................. 103
9
Appendix
HDMI ...........................................188
HDR Filter .................................... 148
High contrast filter ........................146
Highlight Correction ..................... 102
Histogram ...................................... 31
Hometown ................................... 180
Image/Sound Copy ......................163
Infinity s ....................................... 91
Initial Setting ..................................43
Ink Rubbing Filter ........................148
Installing a battery ......................... 34
Installing the software .................. 199
Instant Review ...................... 63, 104
Interval Movie Mode ....................116
Interval Shot ..................................79
IQ Enhancer ................................110
245
Playback ............................. 122, 123
Playback (sound) ......................... 170
Playback (Voice Memo) ............... 172
Playback Mode Palette ....... 128, 230
Playing back movies ....................123
Power Saving ..............................190
Power switch .................... 41, 48, 50
Press fully
(shutter release button) ................. 62
Press halfway
(shutter release button) ................. 62
Product registration ..................... 201
Protect Z .................................. 138
Provided software ........................197
PTP .............................................. 203
R
Rec. Mode Menu .................. 55, 227
Recorded Pixels ................... 96, 115
Recording movies ........................113
Red-eye Compensation ............... 152
Red-eye reduction cd (Flash) .....90
Regarding Waterproof, Dustproof, and
Shockproof Design ..........................8
Remote Control Unit ......................83
Report ............................................ 68
Reset ...........................................194
Resetting settings ........................194
Resize .......................................... 143
Retro filter .................................... 146
Rotating .......................................131
S
9
Appendix
246
Saturation .................................... 108
Saving as still picture (movie) ...... 160
Saving pictures by date ............... 183
Saving settings ............................120
SD Memory Card ........................... 39
Select Time .................................. 181
Self-portrait Assist ......................... 72
Self-timer g ................................... 81
Sensitivity .................................... 100
Setting Menu ........................ 57, 229
Shadow Correction ......................102
Sharpness ................................... 108
Shooting information ......................25
Shooting Mode ..............................65
Shutter release button ...... 48, 50, 62
Slideshow .................................... 129
Small Face Filter ..........................145
Smile Capture ................................70
Soft filter ...................................... 146
Sound settings ............................. 175
Sound types ................................. 175
Specifications ..............................234
Standard = ................................. 91
Starburst filter ..............................146
Starting-up in Playback Mode ........ 42
Start-up screen ............................193
Startup Shortcut ........................... 194
System requirements ................... 198
T
Taking pictures underwater .........111
Text Mode ...................................... 77
Text Size ...................................... 182
Title picture of movie ................... 162
Tone Adjustment ......................... 108
Toy camera filter ..........................146
U
Underwater Mode ........................111
Underwater Movie Mode .............111
USB Connection ..........................202
V
Video output format ............ 187, 232
Voice Memo ................................. 171
Voice Recording ..........................168
W
Waterproof and Dustproof ...........111
White Balance ............................... 98
Windows ...................................... 198
World Time ..................................180
Z
Zoom W T ...................................... 63
Memo
9
Appendix
247
Memo
9
Appendix
248
Memo
PENTAX RICOH IMAGING CO., LTD.
2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX RICOH IMAGING
FRANCE S.A.S.
(European Headquarters)
112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex,
FRANCE
(HQ - http://www.pentax.eu)
(France - http://www.pentax.fr)
PENTAX RICOH IMAGING
DEUTSCHLAND GmbH
Julius-Vosseler-Strasse 104, 22527 Hamburg,
GERMANY
(http://www.pentax.de)
PENTAX RICOH IMAGING
UK LTD.
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX RICOH IMAGING 633 17th Street, Suite 2600, Denver, Colorado 80202,
AMERICAS CORPORATION U.S.A.
(http://www.pentaximaging.com)
PENTAX RICOH IMAGING
CANADA INC.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA
(http://www.pentax.ca)
http://www.pentax.jp/english
• Specifications and external dimensions are subject to change without notice.
54558
Copyright © PENTAX RICOH IMAGING CO., LTD. 2012
R02BAB12 Printed in Indonesia
">