- Computers & electronics
- Audio & home theatre
- DVD players
- Panasonic
- Speaker System DVD-K29GCS
- User manual
advertisement
▼
Scroll to page 2
of
64
ORDER NO.CHM0505009CE DVD / CD Player DVD-K29GCS DL4.1 Mechanism Series Colour (S).......................Silver Type Specifications Power supply: AC220-240 V, 50/60 Hz Power consumption: 11 W lPicture resolution: between 320×240 and 6144×4096 pixels (Sub sampling is 4:2:2 or 4:2:0) Power consumption in standby mode: (9) approx. 1 W Dimensions: 430 (W)×249 (D)×43 (H) mm Mass: 2.2 kg Signal system: NTSC, PAL 625/50, PAL 525/60 HighMAT Level 2 (Audio and Image) Video output: Output level: 1 Vp-p (75 Ω) Output terminal: Pin jack (1 system) S video output: Operating temperature range: +5 to +35°C Y output level: 1 Vp-p (75 Ω) Operating humidity range: 5 to 90 % RH (no condensation) C output level: NTSC; 0.286 Vp-p (75 Ω) Region number: PAL; 0.300 Vp-p (75 Ω) Region No.3 Discs played [8 cm or 12 cm]: Output terminal: Component video output: S terminal (1 system) [NTSC: 525(480)p / 525(480)i, (1) DVD (DVD-Video) (2) DVD-RAM (DVD-VR compatible, JPEG formatted discs) Y output level: 1 Vp-p (75 Ω) (3) DVD-R/RW/+R/+RW (DVD-Video compatible) PB output level: 0.7 Vp-p (75 Ω) (4) CD-Audio (CD-DA) PR output level: 0.7 Vp-p (75 Ω) (5) SVCD (Conforming to IEC62107) Output terminal: Pin jack (Y: green, PB: bule, (6) CD, CD-R/CD-RW (CD-DA, Video CD, SVCD, MP3, WMA, JPEG formatted discs) (7) PAL: 625(576)p / 625(576)i] MP3/WMA lThe total combined maximum number of recognizable audio and picture contents and groups: 4000 audio and picture contents and 400 groups. PR: red) Number of terminals: Audio output: Output level: 2 Vrms (1 kHz, 0 dB) Output terminal: Pin jack Number of terminals: 2 channel: lCompatible compression rate: (8) MP3: between 32 kbps and 320 kbps WMA: between 48 kbps and 320 kbps 1 system 1 system Audio performance: (1) Frequency response: lDVD (linear audio): JPEG 4 Hz-22 kHz (48 kHz sampling) 4 Hz-44 kHz (96 kHz sampling) lExif Ver 2.1 JPEG Baseline files lCD audio: lThe total combined maximum number of recognizable audio and picture contents and groups: (2) 4000 audio and picture contents and 400 groups. (3) 4 Hz-20 kHz S/N ratio: lCD audio: 115 dB Dynamic range: lDVD (linear audio): 100 dB © 2005 Matsushita Electric Industrial CO., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law. DVD-K29GCS lCD audio: (4) 98 dB Total harmonic distortion: lCD audio: 0.0025 % Digital audio output: Coaxial digital output: Pin jack Pickup Wave length: 662 nm/785 nm Laser power: CLASS 2/CLASS 3A Note: Specifications are subject to change without notice. Mass and dimensions are approximate. Solder: This model uses lead free solder (PbF). CONTENTS Page 1 SAFETY PRECAUTIONS 1.1. GENERAL GUIDELINES Page 4 7.6. Optical Pickup Unit 15 4 7.7. Traverse Motor 17 2 PREVENTION OF ELECTRO STATIC DISCHARGE (ESD) TO 8 Self-Diagnosis Function and Service Modes 19 4 8.1. Optical Pickup Breakdown Diagnosis 19 3 Precaution of Laser Diode 5 8.2. Service Mode Table 1 20 4 About lead free solder (PbF) 5 8.3. DVD Self Diagnostic Function-Error Code 20 5 PREVENTION OF STATIC ELECTRICITY DISCHARGE 6 8.4. Last Error Code saved during NO PLAY 21 5.1. Grounding for electrostatic breakdown prevention 6 8.5. Service mode table 2 22 5.2. Handling Precautions for Traverse Unit (Optical Pickup) 6 8.6. Sales demonstration lock function 24 8.7. Handling After Completing Repairs 24 ELECTROSTATICALLY SENSITIVE (ES) DEVICES 6 DISASSEMBLING THE CASING AND CHECKING P.C.B.S 7 6.1. Disassembly Procedure 7 6.2. Casing Parts and P.C.B. Positions 7 6.3. Top Panel 8 6.4. Front Panel 8 6.5. Mic P.C.B. and Operation P.C.B. 8 10.1. Service Tools and Equipment 26 6.6. Module P.C.B. 9 10.2. Important points in adjustment 26 6.7. Mechanism Unit 9 10.3. Storing and Handling Test Discs 26 6.8. Rear Panel 9 10.4. Optical adjustment 27 6.9. Mother P.C.B. and Power SW P.C.B. 9 6.10. Service Position 9 Service Precautions 25 9.2. Firmware version-up of the DVD player 25 10 ADJUSTMENT PROCEDURES 10 7 ASSEMBLING AND DISASSEMBLING THE MECHANISM UNIT 25 9.1. Recovery after the dvd player is repaired 26 11 Abbreviations 29 12 VOLTAGE CHART 31 12.1. MOTHER P.C.B. 31 11 12.2. MODULE P.C.B. 32 7.1. Disassembly Procedure 11 12.3. MIC P.C.B. 33 7.2. Traverse Unit 11 7.3. Tray 12 13.1. OVERALL BLOCK DIAGRAM 35 7.4. Loading section 13 13.2. POWER SUPPLY BLOCK DIAGRAM 36 7.5. Loading motor P.C.B. 14 13.3. SERVO BLOCK DIAGRAM 37 13 BLOCK DIAGRAM 2 35 DVD-K29GCS 13.4. VIDEO BLOCK DIAGRAM 38 16.1. MOTHER P.C.B. 13.5. AUDIO BLOCK DIAGRAM 40 16.2. MOTHER P.C.B. & MODULE P.C.B. ADDRESS INFORMATION 14 INTERCONNECTION SCHEMATIC DIAGRAM & SCHEMATIC 51 52 41 16.3. MODULE P.C.B. (1/2) (COMPONENT SIDE) 53 14.1. INTERCONNECTION SCHEMATIC DIAGRAM 41 16.4. MODULE P.C.B. (2/2) (FOIL SIDE) 54 14.2. SCHEMATIC DIAGRAM NOTES 42 16.5. OPERATION P.C.B. & MIC P.C.B. 55 DIAGRAM NOTES 15 SCHEMATIC DIAGRAM 43 17 EXPLODED VIEWS 15.1. POWER SUPPLY SECTION (MOTHER P.C.B. (1/2)) SCHEMATIC DIAGRAM 43 VIEW 15.2. FRONT & AV OUT SECTION (MOTHER P.C.B. (2/2)) SCHEMATIC DIAGRAM 17.2. MECHANISM SECTION EXPLODED VIEW 47 15.4. MIC SCHEMATIC DIAGRAM 50 57 58 17.3. PACKING & ACCESSORIES SECTION EXPLODED 44 15.3. MODULE SCHEMATIC DIAGRAM 16 PRINT CIRCUIT BOARD 57 17.1. CASING PARTS & MECHANISM SECTION EXPLODED VIEW 18 REPLACEMENT PARTS LIST 51 3 59 60 DVD-K29GCS 1 SAFETY PRECAUTIONS 1.1. GENERAL GUIDELINES 1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit. 2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed. 3. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards. 1.1.1. LEAKAGE CURRENT COLD CHECK 1.1.2. LEAKAGE CURRENT HOT CHECK (See Figure 1 .) 1. Unplug the AC cord and connect a jumper between the two prongs on the plug. 1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check. 2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading should be between 1MΩ and 5.2MΩ. When the exposed metal does not have a return path to the chassis, the reading must be . 2. Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a good earth ground such as a water pipe, as shown in Figure 1. 3. Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor. 4. Check each exposed metallic part, and measure the voltage at each point. 5. Reverse the AC plug in the AC outlet and repeat each of the above measurements. 6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may be used to make the hot checks, leakage current mu3st not exceed 1/2 milliamp. In case a measurement is outside of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer. Figure 1 2 PREVENTION OF ELECTRO STATIC DISCHARGE (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD). 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as alminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD protected)" can generate electrical charge sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, alminum foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. 4 DVD-K29GCS Caution Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise hamless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device). 3 Precaution of Laser Diode 4 About lead free solder (PbF) Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB. Caution: · Pb free solder has a higher melting point than standard solder; Typically thmelting point is 50 - 70°F (30 - 40°C) higher. Please use a high temperature soldering iron. In case of the soldering iron with temperature control, please set it to 700 ± 20°F (370 ± 10°C). · Pb free solder will tend to splash when heated too high (about 1100°F/ 600°C). When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the soldering points with the Pb free solder until it melts enough. 5 DVD-K29GCS 5 PREVENTION OF STATIC ELECTRICITY DISCHARGE The laser diode in the traverse unit (optical pickup) may brake down due to static electricity of clothes or human body. Use due caution to electrostatic breakdown when servicing and handling the laser diode. 5.1. Grounding for electrostatic breakdown prevention Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electricity in the working environment. Proceed servicing works under the working environment where grounding works is completed. 5.1.1. Worktable grounding 1. Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet. 5.1.2. Human body grounding 1. Use the anti-static wrist strap to discharge the static electricity form your body. 5.1.3. Handling of optical pickup 1. To keep the good quality of the optical pickup maintenance parts during transportation and before installation, the both ends of the laser diode are short-circuited. After replacing the parts with new ones, remove the short circuit according to the correct procedure. (See this Technical Guide.) 2. Do not use a tester to check the laser diode for the optical pickup. Failure to do so will damage the laser diode due to the power supply in the tester. 5.2. Handling Precautions for Traverse Unit (Optical Pickup) 1. Do not give a considerable shock to the traverse unit (optical pickup) as it has an extremely high-precise structure. 2. When replacing the optical pickup, install the flexible cable and cut its short land with a nipper. See the optical pickup replacement procedure in this Technical Guide. Before replacing the traverse unit, remove the short pin for preventing static electricity and install a new unit. Connect the connector as short times as possible. 3. The flexible cable may be cut off if an excessive force is applied to it. Use caution when handling the cable. 4. The half-fixed resistor for laser power adjustment cannot be adjusted. Do not turn the resistor. 6 DVD-K29GCS 6 DISASSEMBLING THE CASING AND CHECKING P.C.B.S 6.1. Disassembly Procedure 6.2. Casing Parts and P.C.B. Positions 7 DVD-K29GCS 6.3. Top Panel 1. Unscrew the screws. 6.5. Mic P.C.B. and Operation P.C.B. 1. Pull out the mic volume knob. 6.4. Front Panel 1. Release the tabs. 2. Unscrew the screws. 2. Release the tabs. 3. Remove the connectors. 8 DVD-K29GCS 6.6. Module P.C.B. 6.8. Rear Panel 1. Unscrew the screws. 1. Unscrew the screws. 2. Remove the connectors. 2. Release the tabs. 3. Press each tab with the nipper to module PCB vertically. 6.9. Mother P.C.B. and Power SW P.C.B. 1. Unscrew the screws. 6.7. Mechanism Unit 1. Unscrew the screws. 2. Remove the connectors. 9 DVD-K29GCS 6.10. Service Position 6.10.1. Servicing position of the Module P.C.B. 6.10.2. Servicing position of the Mother P.C.B. 6.10.3. List of the Extension Cables 10 DVD-K29GCS 7 ASSEMBLING AND DISASSEMBLING THE MECHANISM UNIT 7.1. Disassembly Procedure 4. Remove the traverse unit 7.2. Traverse Unit 1. Slide the lever (A) in the arrow direction (to the opposite side) till it stops. 2. Slide the lever (A) further by bending the tab at the right side of the lever A in the right direction. (The right groove opens and the boss becomes seen.) 3. Open the lever (B) to left. (The 2 grooves at the left side open.) 11 DVD-K29GCS 7.3. Tray 1. Slide the guide tray unit while pressing the stopper in the arrow direction, and remove the guide tray unit. 5. Remove the drive arm concave phase from the tray slider and tray. 2. Raise the loading unit. <Assembling the tray unit> 3. Slide the lever in the arrow direction till it stops and pull the tray out. 1. Insert a part of the tray into the unit sliding over the groove on the mechanical chassis unit. 2. Insert the tray to the point before the tab of the mechanical chassis unit. 4. Spread the tabs at the both sides and pull the tray out. (The tray slides a little forward and stops.) 3. Hook the drive arm concave phase over the tray and the tray slider. 4. Press in the tray. 5. Make sure that the tray and the drive arm move smoothly. 12 DVD-K29GCS 4. Remove the belt. 7.4. Loading section 5. Unlock the tab and remove the pulley. 6. Remove the relay gear. 1. Spread the tabs at the both sides and push out the drive arm shaft. 7. Turn the change lever in the arrow direction till it stops. 8. Hook the change lever spring on the change lever project part temporarily. 2. Hook the lock lever spring on the lock lever projection part temporarily. 3. Unlock the tab and remove the lock lever. 13 DVD-K29GCS 9. Pull the lever (B) in the bottom side to your side and remove the change lever. 10. Remove the drive rack, the sub rack and the drive gear. 7.5. Loading motor P.C.B. 1. Unscrew the screws 14 DVD-K29GCS 7.6. 7.6.1. Optical Pickup Unit Cautions to Be Taken in Handling the Optical Pickup Unit The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body. Use due caution to electrostatic discharge damage when servicing the laser diode. 1. Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure. 2. To prevent the laser diode from the electrostatic discharge damage, the Intermediate FFC of the optical pickup unit removed from the PCB should be short-circuited with a short pin or a clip. 3. The Intermediate FFC may be cut off if an excessive force is applied to it. Use caution when handling the Intermediate FFC. 4. The antistatic FPC is connected to the new optical pickup unit. After replacing the optical pickup unit and connecting the fIntermediate FFC, cut off the antistatic FPC. 15 DVD-K29GCS 7.6.2. Procedure for Disassembling the Optical Pickup Unit 1. Move the optical pickup unit in the arrow direction till it stops. 6. Lift the optical pickup unit with the shaft. 2. Unscrew the screws. 7. Remove the optical pickup unit. 3. Remove the drive rack. 4. Unscrew the screw 8. Pull the shaft and the rubber out. 5. Slide the shaft in the arrow direction. 16 DVD-K29GCS <Assembling the optical pickup unit> 1. Pass the intermediate FPC through the frame hole. 2. Align the guide section of the optical pickup unit with the rail. 2. Remove the cover while lifting the inner gear. 3. Install the shaft top to the holder. 3. Remove the solders. 4. The intermediate FFC is fixed as shown below. 4. Remove the traverse motor. 7.7. Traverse Motor 1. Unscrew the screws. 17 DVD-K29GCS 18 DVD-K29GCS 8 Self-Diagnosis Function and Service Modes 8.1. Optical Pickup Breakdown Diagnosis The optical pickup self-diagnosis function and tilt adjustment check function have been included in this unit. When repairing, use the following procedure for effective Self-diagnosis and tilt adjustment.Be sure to use the self-diagnosis function before replacing the optical pickup when "NO DISC" is displayed. As a guideline, you should replace the optical pickup when the value of the laser drive current is more than 55. Note: Press the power button to turn on the power, and check the value within three minutes before the unit warms up. (Otherwise, the result will be incorrect.) 19 DVD-K29GCS 8.2. Service Mode Table 1 The service modes can be activated by pressing various button combination on the player and remote control unit. Player buttons PAUSE + OPEN/CLOSE Remote control unit buttons 0 5 6 7 9 FUNCTION PAUSE PAUSE QUICK OSD OPEN/CLOSE 8.3. Application Displaying the UHF display F_ _ _ Note Refer to section 8.3. SelfDiagnosis Function (UHF Display). Jitter check, tilt adjustment Refer to section 10.4. *Display shows J_xxx/yyy_zz Optical Pickup Tilt "yyy" and "zz" shown to the right have nothing to do with the jitter Adjustment value. "yyy" is the error counter, while "zz" is the focus drive value. Refer to section 10.4. for Optical Pickup Tilt Adjustment Procedure. Checking the region numbers and broadcast system Checking the program version Check the IC8651 FLASH ROM program. Lighting Confirmation Function of Display Tube Checking the laser drive current Refer to section 7 Optical Pickup Replacement Procedure. Writing the laser drive current value after replacing the optical pickup (do not use for anything other than optical pickup replacement) Initializing the DVD player Refer to section 8.5. (restoring factory preset settings) Initializing the DVD player. DVD Self Diagnostic Function-Error Code Error Code U11 U15 H01 H02 Error Content U, H error Focus error Unfinalized DVD-R Tray loading error Spindle servo error H03 H04 H05 H06 Traverse servo error Tracking servo error Seek error Power error H07 F500 Spindle motor error DSC related DSC error F501 DSC not Ready F502 DSC Time out error F503 F505 DSC communication Communication error (result error occured Failure although communication command was sent) DSC Attention error Similar disposal as F500 F506 Invalid media F600 F601 F602 F603 F610 Additional error explanation Defect 1 Defect 2 Defect 3 DV2 (IC8001) servo drive DV2 (IC8001) EEPROM (IC8611) DV2 (IC8001) DV2 (IC8001) servo drive (Spindle servo, DV2 (IC8001) SP motor, CLV servo error) Cannot switch off the power because of the panel and system computer communication error drive ODC related Access failure to management information caused by demodulation error Indeterminate sector ID requested Access failure to LEADIN caused by demodulation error Access failure to KEYDET caused by demodulation error ODC abnormality Spindle motor ass’y DV2 (IC8001) stops in the occurence of servo error (starup, focus error, etc) DSC-system computer communication error (Communication failure caused by idling of DSC) Similar disposal as F500 unreadable, Optical pickup DV2 (IC8001) Optical pickup DV2 (IC8001) Optical pickup DISC Operation stopped because navigation data is not accessible caused by the demodulation defect DV2 (IC8001) Operation stopped caused by the request to access abnormal ID data LEAD IN data unreadable DV2 (IC8001) Disc is flipped incompatible disc over, TOC Access failure to CSS data of disc No permission for command execution 20 DV2 (IC8001) servo drive Defect 4 DVD-K29GCS Error Code F611 F612 F630 F631 F632 F103 Error Content 6626 QCODE don’t read Error No CRC OK for a specific time No reply to KEY DET enquiry CPPM KEY DET is not available till the FILE terminal CPPM KEY DET is not available Disc code Illegal highlight Position Additional error explanation Access failure to seek address in CD series Defect 1 DV2 (IC8001) DV2 (IC8001) Defect 2 (CPPM file system is unreadable caused by scratches) DISC CPPM (*1) Been revoked or falsified DISC EEPROM (IC8611) Big possibility of disc specification violation during highlight display DISC Access failure to ID data in DVD series F893 F894 EEPROM abnormality F895 Language area Firm version agreement check for factory preset abnormality setting failure prevention No existence model Firm version agreement check for factory preset setting failure prevention Initialize is not Initialize completion check for factory preset completed setting failure prevention Disagreement of Unsuitable combination of AV DECORDER, hardware and software SDRAM and FLASH ROM (firmware) Message command is Begin sending message to AV task not appropriate F700 F701 F702 F880 F890 F891 F896 F897 F898 F8A0 Defect 4 (for internal use only) HIC Error Force initialize failure (time out) Micro computer error MBX overflow Message command does not end Message command changes Task number is not appropriate Sending message when message is being sent to AV task Message couldn’t be sent to AV task FROM falsification F4FF Defect 3 EEPROM (IC8611) DV2 (IC8001) FROM (IC8651) EEPROM (IC8611) DV2 (IC8001) Serial communicat ion on lone CPPM (*1) When replying message to disc manager Next message is sent before replying to disc manager Message is changed before it is sent as a reply to disc manager Message coming from a non-existing task Sending message to AV task Begin sending message to AV task FROM (IC8651) Note: An error code will be canceled if a power supply is turned OFF. *1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights. 8.4. Last Error Code saved during NO PLAY Error code Error Content F0BF 6) Cannot playback because physical layer is not recoginizable F0C0 8) DVD: Cannot playback because it is not DVD Video/Adio/VR F0C1 9) DVD: Prohibited by the restricted region code F0C2 A) DVD: PAL restricted playback F0C3 B) DVD: Parental lock setting prohibits the playback of the entire title F0C4 C) VCD: Prohibited because it is in PHOTO CD fromat F0C5 VCD/CD: Prohibited because it is CDROM without CD-DA System computer Setting task PCND_NOPLAY PHYSICAL DriveManager 0x50 PCND_NOPLAY VIDEO 0x70 DiscManager System computer internal error code 0xDOBF 0xDOC0 PCND_NOPLAY RCD 0x80 DiscManager 0xDOC1 PCND_NOPLAY PAL 0x90 PCND_NOPLAY PTL 0xA0 DiscManager DiscManager 0xDOC2 0xDOC3 PCND_NOPLAY PHOTO CD DiscManager 0xB0 PCND_NOPLAY CDROM 0xC0 DiscManager 0xDOC4 21 0xDOC5 DVD-K29GCS 8.5. Service mode table 2 Pressing various button combinations on the player and remote control unit can activate the service modes. 22 DVD-K29GCS 23 DVD-K29GCS 8.6. Sales demonstration lock function This function prevents discs from being lost when the unit is used for sales demonstrations by disabling the disc eject function. "LOC" is displayed on the unit, and ordinary operation is disabled. 8.6.1. Setting The sales demonstration lock is set by simultaneously pressing STOP button on the player and POWER button on the remote control unit for 1 second or longer. 8.6.2. Cancellation The lock can be cancelled by the same procedure as used in setting. ("UNLOC" is displayed on cancellation. Disconnecting the power cable from power outlet does not cancel the lock.) 8.7. Handling After Completing Repairs Use the following procedure after completing repairs. 8.7.1. Method Confirm that the power is turned on: 1. Press the "OPEN/CLOSE" button to close the tray. 2. Press the "POWER" button to turn off the power. 3. Disconnect the power plug from the outlet. 8.7.2. Precautions Do not disconnect the power plug from the outlet with the tray still open, then close the tray manually. 24 DVD-K29GCS 9 Service Precautions 9.1. Recovery after the dvd player is repaired · When FROM or module P.C.B. is replaced, carry out the recovery processing to optimize the drive. Playback the recovery disk to process the recovery automatically. · Recovery disc [Product number: RFKZD03R005] (RFKZD03R004 can not be recovered as a partial item. So use the new recovery disc, RFKZD03R005.) · Performing recovery 1. Load the recovery disc RFKZD03R005 on to the player and run it. 2. Recovery is performed automatically. When it is finished, a message appears on the screen. 3. Remove the recovery disc. 4. Turn off the power. Note: This unit requires no initialization process carried out after the traditional DVD players were repaired. When the recovery measures are taken, the customer setting will return to the factory setting as same as the procedure described in item of "Initialization" in 8.5. is carried out. Write down the contents of the setting before recovery processing, and reset the player. 9.2. Firmware version-up of the DVD player · The firmware of the DVD player may be renewed to improve the quality including operationability and playerbility to the substandard discs.processing to optimize the drive. The recovery disc has also firmware version-up. · After version-up, recovery processing is executed automatically. · Part number of the recovery disc for version-up will be noticed when it is supplied. · Updating firmware 1. Load the recovery disc that is supplied to the player and run it. 2. Firmware version of the player is automatically checked. Appropriate message appears whenever necessary. 3. Using remote controller´s cursor key, select whether version updating is to be done or not. (Selection of Yes/No) 4. a. If Yes is selected, version updating is performed. b. If No is selected, only recovery is performed. 5. a. When updating is finished, remove the disc according to the message appearing on the screen. b. Remove the disc according to the message appearing on the screen. 6. Turn off the power. Note: If the AC power supply is shut out during version-up due to a power failure, the version-up is improperly carried out. In such a case, replace the FROM and carry out the version-up again. 25 DVD-K29GCS 10 ADJUSTMENT PROCEDURES 10.1. Service Tools and Equipment Application Tilt adjustment Name Number DVDT-S15 or DVDT-S01 DVD test disc TORX screw driver (T6) Inspection Others Confirmation Extension cable (module P.C.B. to mother P.C.B.) Extension cable (module P.C.B. to mother P.C.B.) Hanarl Grease Drysurf CD test disc VCD test disc Recovery disc Available on sales route. (T6) or RFKZ0185 VUC8026 RFKZ0106 VFK1784 RFKXPG641 RFKXGUD24 PVCD-K06 or any other commercially available disc PVCD-K06 or any other commercially available disc RFKZD03R005 10.2. Important points in adjustment 10.2.1. Important points in optical adjustment · Before starting optical adjustment, be sure to take anti-static measures. · Optical pickup tilt adjustment is needed after replacement of the following components. 1. Optical pickup unit 2. Spindle motor unit 3. Optical pickup peripheral parts (such as rail) Notes Adjustment is generally unnecessary after replacing other parts of the traverse unit. However, make adjustment if there is a noticeable degradation in picture quality. Optical adjustments cannot be made inside the optical pickup. Adjustment is generally unnecessary after replacing the traverse unit. 10.2.2. Important points in electrical adjustment · Follow the adjustment procedures described in this Manual. 10.3. Storing and Handling Test Discs · Surface precision is vital for DVD test discs. Be sure to store and handle them carefully. 1. Do not place discs directly onto the workbench, etc., after use. 2. Handle discs carefully in order to maintain their flatness. Place them into their case after use and store them vertically. Store discs in a cool place where they are not exposed to direct sunlight or air from air conditioners. 3. Accurate adjustment will not be possible if the disc is warped when placed on a surface made of glass, etc. If this happens, use a new test disc to make optical adjustments. 4. If adjustment is done using a warped disc, the adjustment will be incorrect and some discs will not be playable. 26 DVD-K29GCS 10.4. Optical adjustment 10.4.1. Optical pickup tilt adjustment Measurement point Adjustment point Tangential adjustment screw Tilt adjustment screw Measuring equipment None (Main unit display for servicing is used.) Mode Disc T01 (inner periphery) play DVDT-S15 or DVDT-S01 T30 (central periphery) play T43 (outer periphery) play Adjustment value Adjust to the minimum jitter value. 10.4.1.1. Adjustment procedure Note: When FFC has covered the adjustment screw, please insert a screwdriver, evading FFC(s). 1. While pressing PAUSE and OPEN/CLOSE buttons on the main unit, press "5" on the remote control unit. 2. Confirm that "J_xxx/yyy_zz" is shown on the front display. For your information: "yyy" and "zz" shown to the right have nothing to do with the jitter value. "yyy" is the error counter, while "zz" is the focus drive value. Note: Jitter value appears on the front display. 3. Play test disc T30 (central periphery). 4. Adjust tangential adjustment screw so that the jitter value is minimized. 5. Play test disc T30 (central periphery). 6. Adjust tilt adjustment screw 1 so that the jitter value is minimized. 7. Play test disc T30 (central periphery). 8. Adjust tilt adjustment screw 2 so that the jitter value is minimized. 10.4.1.3. Check after adjustment 9. Repeat adjusting tilt adjustment screws 1 and 2 alternately until the jitter value is minimized. Play test disc or any other disc to make sure there is no picture degradation in the inner, middle and outer peripheries, and no audio skipping. After adjustment is finished, lock each adjustment screw in position using screw lock. 10. Finally please reproduce T01 (inner periphery) and T43 (outer periphery) and check the jitter value. (Please readjust, when the jitter value is extremely different.) 10.4.1.2. Important points 1. Make tangential adjustment first, and then make tilt adjustment. 2. Repeat adjusting two or three times to find the optimum point. 3. Finish the procedure with tilt adjustment. Jitter value depends on the model: 1. If the jitter value changes like B, the optimum point is easy to find. 2. If the jitter value changes like A, set the optimum point near the middle. 27 DVD-K29GCS 10.4.1.4. Procedure for screw lock It is also possible to perform screw lock on the head of an adjustment screw after an adjustment end using an injector etc. from the hole at the bottom of a product (hole of bottom chassis), without decomposing. Please perform a screw lock in which by the side of the tip or head of an adjustment screw. <When a screw lock is performed to the tip part side of an adjustment screw> 1. After adjustment, remove top panel. 2. After pulling out a tray to the position which does not become obstructive,remove clamper plate. 3. Fix adjustment screw with screw lock. 4. After fixing, reassemble clamper plate and top panel. <When a screw lock is performed to the head side of an adjustment screw> 1. After adjustment, remove top panel, front panel, rear panel and mechanism unit in this sequence. 2. Lay the mechanism unit upside adjustment scwer with screw lock. down, and fix 3. After fixing, reassemble mechanism unit, rear panel, front panel and top panel. 28 DVD-K29GCS 11 Abbreviations INITIAL/LOGO A A0~UP ACLK AD0~UP ADATA ALE AMUTE AREQ ARF ASI ASO ASYNC B BCK BCKIN BDO BLKCK BOTTOM BYP BYTCK C CAV CBDO CD CDSCK CDSRDATA CDRF CDV CHNDATA CKSL CLV COFTR CPA CPCS CPDT CPUADR CPUADT CPUIRQ CPRD CPWR CS CSYNCIN CSYNCOUT D DACCK DEEMP DEMPH DIG0~UP DIN DMSRCK DMUTE DO DOUT0~UP DRF DRPOUT DREQ DRESP DSC DSLF DVD ABBREVIATIONS ADDRESS AUDIO CLOCK ADDRESS BUS AUDIO PES PACKET DATA ADDRESS LATCH ENABLE AUDIO MUTE AUDIO PES PACKET REQUEST AUDIO RF SERVO AMP INVERTED INPUT SERVO AMP OUTPUT AUDIO WORD DISTINCTION SYNC BIT CLOCK (PCM) BIT CLOCK INPUT BLACK DROP OUT SUB CODE BLOCK CLOCK CAP. FOR BOTTOM HOLD BYPATH BYTE CLOCK CONSTANT ANGULAR VELOCITY CAP. BLACK DROP OUT COMPACT DISC CD SERIAL DATA CLOCK CD SERIAL DATA CD RF (EFM) SIGNAL COMPACT DISC-VIDEO CHANNEL DATA SYSTEM CLOCK SELECT CONSTANT LINEAR VELOCITY CAP. OFF TRACK CPU ADDRESS CPU CHIP SELECT CPU DATA CPU ADDRESS LATCH CPU ADDRESS DATA BUS CPU INTERRUPT REQUEST CPU READ ENABLE CPU WRITE ENABLE CHIP SELECT COMPOSITE SYNC IN COMPOSITE SYNC OUT D/A CONVERTER CLOCK DEEMPHASIS BIT ON/OFF DEEMPHASIS SWITCHING FL DIGIT OUTPUT DATA INPUT DM SERIAL DATA READ CLOCK DIGITAL MUTE CONTROL DROP OUT DATA OUTPUT DATA SLICE RF (BIAS) DROP OUT SIGNAL DATA REQUEST DATA RESPONSE DIGITAL SERVO CONTROLLER DATA SLICE LOOP FILTER DIGITAL VIDEO DISC INITIAL/LOGO E EC ECR F G H I L M O P 29 ENCSEL ETMCLK ETSCLK FBAL FCLK FE FFI FEO FG FSC FSCK GND HA0~UP HD0~UP HINT HRXW IECOUT IPFRAG IREF ISEL LDON LPC LRCK MA0~UP MCK MCKI MCLK MDATA MDQ0~UP MDQM MLD MPEG ODC OFTR OSCI OSCO OSD P1~UP PCD PCK PDVD PEAK PLLCLK PLLOK PWMCTL PWMDA PWMOA, B ABBREVIATIONS ERROR TORQUE CONTROL ERROR TORQUE CONTROL REFERENCE ENCODER SELECT EXTERNAL M CLOCK (81MHz/40.5MHz) EXTERNAL S CLOCK (54MHz) FOCUS BALANCE FRAME CLOCK FOCUS ERROR FOCUS ERROR AMP INVERTED INPUT FOCUS ERROR AMP OUTPUT FREQUENCY GENERATOR FREQUENCY SUB CARRIER FS (384 OVER SAMPLING) CLOCK COMMON GROUNDING (EARTH) HOST ADDRESS HOST DATA HOST INTERRUPT HOST READ/WRITE IEC958 FORMAT DATA OUTPUT INTERPOLATION FLAG I (CURRENT) REFERENCE INTERFACE MODE SELECT LASER DIODE CONTROL LASER POWER CONTROL L CH/R CH DISTINCTION CLOCK MEMORY ADDRESS MEMORY CLOCK MEMORY CLOCK INPUT MEMORY SERIAL COMMAND CLOCK MEMORY SERIAL COMMAND DATA MEMORY DATA INPUT/OUTPUT MEMORY DATA I/O MASK MEMORY SERIAL COMMAND LOAD MOVING PICTURE EXPERTS GROUP OPTICAL DISC CONTROLLER OFF TRACKING OSCILLATOR INPUT OSCILLATOR OUTPUT ON SCREEN DISPLAY PORT CD TRACKING PHASE DIFFERENCE PLL CLOCK DVD TRACKING PHASE DIFFERENCE CAP. FOR PEAK HOLD CHANNEL PLL CLOCK PLL LOCK PWM OUTPUT CONTROL PULSE WAVE MOTOR DRIVE A PULSE WAVE MOTOR OUT A, B DVD-K29GCS INITIAL/LOGO R RE RFENV RFO RS RSEL RST RSV S SBI0, 1 SBO0 SBT0, 1 SCK SCKR SCL SCLK SDA SEG0~UP SELCLK SEN SIN1, 2 SOUT1, 2 SPDI SPDO SPEN SPRCLK SPWCLK SQCK SQCX SRDATA SRMADR SRMDT0~7 SS STAT STCLK STD0~UP STENABLE STSEL STVALID SUBC SBCK SUBQ SYSCLK T TE TIBAL TID TIN TIP TIS TPSN TPSO TPSP TRCRS TRON TRSON ABBREVIATIONS READ ENABLE RF ENVELOPE RF PHASE DIFFERENCE OUTPUT (CD-ROM) REGISTER SELECT RF POLARITY SELECT RESET RESERVE SERIAL DATA INPUT SERIAL DATA OUTPUT SERIAL CLOCK SERIAL DATA CLOCK AUDIO SERIAL CLOCK RECEIVER SERIAL CLOCK SERIAL CLOCK SERIAL DATA FL SEGMENT OUTPUT SELECT CLOCK SERIAL PORT ENABLE SERIAL DATA IN SERIAL DATA OUT SERIAL PORT DATA INPUT SERIAL PORT DATA OUTPUT SERIAL PORT R/W ENABLE SERIAL PORT READ CLOCK SERIAL PORT WRITE CLOCK SUB CODE Q CLOCK SUB CODE Q DATA READ CLOCK SERIAL DATA SRAM ADDRESS BUS SRAM DATA BUS 0~7 START/STOP STATUS STREAM DATA CLOCK STREAM DATA STREAM DATA INPUT ENABLE STREAM DATA POLARITY SELECT STREAM DATA VALIDITY SUB CODE SERIAL SUB CODE CLOCK SUB CODE Q DATA SYSTEM CLOCK TRACKING ERROR BALANCE CONTROL BALANCE OUTPUT 1 BALANCE INPUT BALANCE INPUT BALANCE OUTPUT 2 OP AMP INPUT OP AMP OUTPUT OP AMP INVERTED INPUT TRACK CROSS SIGNAL TRACKING ON TRAVERSE SERVO ON INITIAL/LOGO V VBLANK VCC VCDCONT W X 30 VDD VFB VREF VSS WAIT WDCK WEH WSR X XALE XAREQ XCDROM XCS XCSYNC XDS XHSYNCO XHINT XI XINT XMW XO XRE XSRMCE XSRMOE XSRMWE XVCS XVDS XVSYNCO ABBREVIATIONS V BLANKING COLLECTOR POWER SUPPLY VOLTAGE VIDEO CD CONTROL (TRACKING BALANCE) DRAIN POWER SUPPLY VOLTAGE VIDEO FEED BACK VOLTAGE REFERENCE SOURCE POWER SUPPLY VOLTAGE BUS CYCLE WAIT WORD CLOCK WRITE ENABLE HIGH WORD SELECT RECEIVER X´ TAL X ADDRESS LATCH ENABLE X AUDIO DATA REQUEST X CD ROM CHIP SELECT X CHIP SELECT X COMPOSITE SYNC X DATA STROBE X HORIZONTAL SYNC OUTPUT XH INTERRUPT REQUEST X´ TAL OSCILLATOR INPUT X INTERRUPT X MEMORY WRITE ENABLE X´ TAL OSCILLATOR OUTPUT X READ ENABLE X SRAM CHIP ENABLE X SRAM OUTPUT ENABLE X SRAM WRITE ENABLE X V-DEC CHIP SELECT X V-DEC CONTROL BUS STROBE X VERTICAL SYNC OUTPUT DVD-K29GCS 12 VOLTAGE CHART Note: · Circuit voltage and waveform described herein shall be regarded as reference information when probing defect point, because it may differ from an actual measuring value due to difference of Measuring instrument and its measuringcondition and product itself. 12.1. MOTHER P.C.B. Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP 1 2.0 1.9 2 1.7 1.7 1 5.1 5.1 2 0 0 IC1021 3 0 0 IC1195 3 3.8 3.8 1 5.0 5.0 2 2.4 2.4 3 2.5 2.5 1 0 0 2 0 0 3 0 0 1 0 0 2 0.3 0.3 3 0.4 0.4 4 3.3 3.3 21 3.1 3.2 22 3.3 3.3 23 3.3 3.3 41 -7.4 -9.2 42 -7.4 -9.2 61 3.3 0 62 0 3.2 Q1045 C 23.0 22.8 E 14.9 14.9 1 5.1 5.1 E 0 0 2 5.1 5.1 Q4302 C 3.6 0 Q4940 C 0 0 Q6085 C -6.4 -6.5 QR1115 C 0 0 1 0 0 2 0 0 1 0 0 2 0 0 E 0 0 E 0 0 E -6.5 -6.6 4 15.0 15.0 5 -211.0 -87.2 4 3.5 3.5 5 3.3 3.3 1 2.9 2.9 IC1101 2 2.5 2.5 3 0 0 6 1.9 1.7 7 0 0 IC3501 8 9 2.3 2.3 2.3 2.3 6 0 0 7 0 0 8 11.8 12.0 5 3.3 3.3 6 3.3 3.3 7 3.3 3.3 8 3.3 3.3 9 1.7 1.7 24 3.3 3.3 25 0 0 26 0 0 27 0 0 28 3.3 3.3 29 3.3 3.3 43 -10.4 -9.2 44 -7.4 -9.2 45 -7.4 -9.2 46 -7.4 -9.2 47 -10.4 -9.2 48 -10.4 -9.2 49 -7.7 -9.2 63 3.3 0 64 0 0 1 5.1 5.1 Q1051 2 3 4.1 0 4.1 0 4 5 1.9 5.0 1.7 5.0 IC4301 4 5 -10.3 0 -10.1 0 B 15.5 15.5 Q1115 3 4 0.1 5.1 0.1 5.1 5 5.1 5.1 10 0 0 E 0 0 Q1125 C 1.3 1.3 B 0 0 E 0 0 B -4.2 -3.7 E 0 0 6 5.1 5.1 Q4422 C 0 0 Q4947 C 0 0 E 0.1 3.7 QR4302 C -4.2 3.6 5 5.8 6.0 6 0 0 E 0 0 1 5.0 5.0 QR4306 C 0.1 3.7 5 3.2 3.2 6 0 0 1 -10.6 -10.3 2 0 0 B -4.2 0.7 E 0 0 B -4.2 -3.7 E 0 0 B 0 0 2 3.3 3.3 IC1151 3 9.0 9.0 4 - 5 0 0 11 2.3 2.3 12 2.3 2.3 13 1.9 1.6 14 1.9 1.6 15 1.9 1.6 16 2.3 2.4 12 0 0 13 0.1 0 14 0 0.1 15 3.3 3.3 16 1.6 1.6 17 1.6 1.6 18 3.3 0 19 0 0 20 0 0 32 0 3.3 33 0 3.3 34 -4.4 0 35 -4.4 0 36 3.2 -8.7 37 -8.0 -9.2 38 -8.0 -9.2 39 -7.9 -9.2 40 -8.0 -9.2 52 -10.2 -9.2 53 -10.3 -9.2 54 -10.2 -9.2 55 -7.5 -9.2 56 -10.4 -9.2 57 -10.4 -9.3 58 3.2 0 59 2.7 0 60 2.8 0 Q1082 C 0 0 B 0.7 0.7 4 0.7 0.7 5 1.3 1.3 IC6001 10 11 1.5 0 1.5 0 IC6001 30 31 3.3 0 3.3 0 IC6001 50 51 -3.0 0 -9.2 -9.2 IC6001 4 1.7 1.7 E 2.4 2.4 1 10.7 11.2 B 1.8 1.7 Q4423 C 0 0 Q4948 C 0 0 Q1081 C 0.7 0.7 B 0 0 1 1.8 1.7 2 1.3 1.3 B -4.2 0.7 E 1.8 1.8 B -4.2 -3.7 E 0 0 E 0 0 Q1126 3 1.3 1.3 Q4751 C 5.0 5.0 Q4949 C 5.8 6.0 B 2.5 2.5 E 0 0 B 0 0 E 0 0 Q4924 C -4.2 -3.7 Q4950 C 0 0 QR4308 C 1.5 1.6 B 0 0 B -5.8 -5.8 B 3.3 3.3 QR4305 3 4 0 -4.2 0 -3.7 Q4901 3 4 11.4 11.4 11.9 11.8 2 5.0 5.0 QR4304 3 4 5.0 3.6 5.0 0 B 3.6 0 Q4902 3 4 11.4 11.4 11.9 11.8 31 E 0 0 5 0 0 QR4307 C 1.6 1.6 5 11.4 11.8 6 -10.6 -10.4 6 0 0 B 0 0 E 1.6 1.7 B 0 0 B 0.7 0.7 DVD-K29GCS 12.2. MODULE P.C.B. Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP 1 3.2 3.2 2 3.3 3.1 3 0 0 4 3.3 3.1 5 3.3 3.3 6 3.3 3.3 7 3.3 3.1 8 3.3 3.1 9 0 0 21 0 0 22 3.3 3.3 23 2.3 3.3 24 1.8 0 25 1.1 3.3 26 1.2 1.2 27 2.0 0 28 3.3 3.3 29 0 0 41 3.3 2.8 42 3.3 0.6 43 0 2.5 44 1.2 1.2 45 0 2.1 46 0 1.0 47 3.3 0.6 48 3.3 3.3 49 0 0 61 0 0 62 3.3 3.3 63 0 0 64 0 0 65 0 0 66 0.1 0 67 2.9 0 68 2.8 2.8 69 2.7 2.8 81 2.8 3.2 82 3.3 0 83 3.3 0 84 3.3 3.3 85 0 0 86 0 0 87 0 0 88 0 0 89 0 1.2 101 2.3 2.3 102 2.1 2.1 103 1.8 1.8 104 1.3 0 105 0 0 106 1.7 1.8 107 3.3 3.2 108 2.1 2.1 109 2.1 2.0 121 1.4 1.4 122 0 0 123 0.4 0 124 1.0 0.1 125 0.1 0.1 126 0.1 0.6 127 2.2 2.2 128 1.6 1.6 129 2.6 2.2 141 3.3 3.3 142 1.2 1.2 143 1.9 2.0 144 2.1 2.1 145 0 0 146 1.6 1.6 147 1.6 1.6 148 1.6 1.6 149 0.6 0.4 161 3.3 3.3 162 0 0 163 1.6 1.6 164 0 0 165 1.5 166 1.5 1.5 167 3.3 3.3 168 0.1 0.1 169 1.7 1.7 181 0 0 182 3.3 3.3 183 0 0 184 0 0 185 0 0 186 0 0 187 0 0 188 0 0 189 0 0 201 0 0 202 3.3 3.3 203 1.0 0 204 1.5 0.8 205 0 0.9 206 1.7 0 207 0.5 0 208 3.1 1.8 209 3.3 3.3 221 2.3 0 222 0 0 223 0 1.6 224 0 0 225 3.3 3.3 226 1.6 1.6 227 0 0 228 0 1.5 229 0 1.5 241 3.0 1.6 242 0 0 243 1.6 1.6 244 3.3 3.2 245 3.2 3.2 246 3.3 3.3 247 0 0 248 3.2 0 249 2.3 3.3 1 3.3 3.3 2 3.2 3.0 3 3.3 3.3 4 3.2 3.2 5 3.2 3.1 6 0 0 7 3.2 3.3 8 3.2 3.3 9 3.3 3.3 21 1.5 1.7 22 0 0 23 0 0.1 24 0 0.1 25 0 0.2 26 3.1 1.6 27 3.3 3.3 28 0 0 29 2.3 1.6 41 0 0 42 3.2 3.2 43 3.3 3.3 46 0 0 47 3.1 3.0 48 3.2 3.2 49 3.3 3.3 1 3.3 3.3 2 - 3 0 0 44 45 3.2 3.2 3.2 3.1 IC8111 4 5 2.0 4.7 2.3 4.7 6 - 7 - 8 5.1 5.1 1 3.3 3.3 2 1.6 1.6 3 3.3 0 4 3.3 0 5 1.8 1.6 6 1.6 1.6 7 1.6 1.6 8 9.0 9.0 21 5.1 5.1 22 1.6 1.6 23 1.6 1.6 24 0 0 25 1.8 1.7 26 1.8 1.8 27 1.8 1.6 1 1.6 1.6 2 1.6 1.6 IC8601 2 3.2 3.2 3 1.3 0 4 1.7 1.7 5 1.7 3.2 6 3.3 3.3 7 3.3 3.3 28 1.6 1.6 IC8421 8 9 3.3 0 3.3 0 1 0 0 IC8001 10 11 3.3 3.3 3.2 3.1 IC8001 30 31 0.9 0.9 0.7 0.5 IC8001 50 51 3.3 0 1.9 2.8 IC8001 70 71 3.0 0 0 0 IC8001 90 91 1.2 0 0 0 IC8001 110 111 1.8 1.8 1.8 1.8 IC8001 130 131 2.6 2.6 2.2 2.2 IC8001 150 151 3.3 0.4 3.3 0.5 IC8001 170 171 1.6 1.3 1.6 0 IC8001 190 191 3.3 0 3.3 0 IC8001 210 211 3.3 0.6 3.3 2.2 IC8001 230 231 0 3.3 0 3.3 IC8001 250 251 0 2.4 0 3.3 IC8051 10 11 3.2 3.2 3.1 3.0 IC8051 30 31 1.6 1.5 1.6 1.6 IC8051 50 51 3.1 3.2 2.9 2.9 9 4.3 4.2 3 3.3 3.3 32 12 3.3 3.3 13 3.3 3.0 14 3.3 3.2 15 3.3 2.9 16 0 0 17 3.3 3.2 18 3.3 3.1 19 3.3 3.3 20 0 0 32 0.7 0.3 33 0 0.8 34 3.3 3.3 35 0 0 36 0 1.1 37 0 2.3 38 3.3 2.5 39 0 1.4 40 0 1.4 52 2.0 2.6 53 3.3 3.3 54 0 0 55 0 3.3 56 3.3 3.3 57 3.3 3.3 58 3.3 3.3 59 3.3 3.3 60 3.3 3.3 72 0 0 73 3.2 0 74 0 0 75 1.6 1.6 76 2.0 1.6 77 1.7 1.7 78 0.1 3.3 79 3.3 0 80 0 3.3 92 0 0 93 0 0 94 0 0 95 0 0 96 0 0 97 0 0 98 3.3 3.3 99 0.7 0.8 100 0 0 112 1.3 1.0 113 1.3 1.6 114 1.6 1.6 115 1.6 1.6 116 1.6 1.6 117 1.6 3.3 118 3.3 3.3 119 1.9 1.8 120 1.5 1.5 132 2.6 2.2 133 2.6 2.2 134 2.6 2.2 135 2.4 2.2 136 2.4 2.2 137 2.4 2.2 138 2.4 2.2 139 1.6 1.6 140 1.8 1.6 152 0.4 0.4 153 1.0 1.0 154 1.0 1.0 155 2.2 2.2 156 0.7 0.4 157 0 0 158 0.9 0.9 159 3.3 3.3 160 0 0 172 1.2 1.2 173 0 0 174 0 0 175 0 0 176 1.1 0 177 3.3 1.6 178 3.3 3.3 179 0 0 180 3.3 3.3 192 1.0 0.8 193 1.6 1.6 194 1.0 1.0 195 1.0 0.9 196 3.3 3.3 197 3.3 3.3 198 0.8 0.8 199 0.8 0.9 200 0.7 0.9 212 0.6 2.2 213 0 0 214 0 0 215 3.1 0 216 3.3 3.0 217 3.3 3.3 218 0 0 219 1.2 1.2 220 1.2 1.6 232 1.6 3.3 233 0 0.5 234 3.0 0.8 235 0 0 236 1.2 1.2 237 0 0 238 0 0 239 3.3 3.3 240 3.0 3.1 252 3.1 3.3 253 0 0 254 3.2 0 255 3.3 3.3 256 3.2 3.0 12 0 0 13 3.3 2.9 14 3.1 3.3 15 3.3 2.8 16 3.3 3.3 17 3.3 3.2 18 3.2 3.2 19 3.0 3.2 20 1.5 2.7 32 1.5 1.5 33 0 0.1 34 0 0 35 0 0 36 0 0 37 3.3 3.3 38 3.3 1.6 39 2.4 2.8 40 - 52 0 0 53 3.3 3.1 54 0 0 IC8251 10 11 4.3 4.3 4.2 4.2 IC8251 12 4.2 4.2 13 3.1 3.8 14 5.5 3.8 15 2.5 2.6 16 2.6 2.6 17 2.6 2.6 18 2.6 2.6 19 0 0 20 9.0 9.0 10 2.5 2.5 12 2.5 2.5 13 0 0 14 5.0 5.0 15 5.0 0 16 4.9 0 11 2.5 2.5 DVD-K29GCS Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP Ref No. MODE PLAY STOP IC8611 4 5 0 3.3 0 3.3 1 0 0 2 0 0 3 0 0 1 1.0 2 0.3 3 0.6 4 2.4 21 0 22 0 23 0 41 0.6 43 0.6 E 5.0 5.0 42 0.6 Q8550 C 5.0 5.1 Q8562 C 0.1 0.1 1 0 0 2 0 0 E 5.0 5.1 6 3.3 3.3 7 0 0 8 3.3 3.3 5 0 6 0 7 3.3 8 3.3 9 0 24 0 25 3.3 26 3.3 27 0 28 3.3 29 0.6 44 0.6 45 0.6 47 3.3 48 0 E 0.4 0 46 0 Q8551 C 4.0 5.0 5 0 0 6 4.7 4.7 B 4.3 4.4 B 5.0 5.0 QR8111 3 4 1.2 0 1.2 0 B 1.0 0.1 E 0 0 IC8651 10 11 0 3.3 IC8651 30 31 0.6 0.6 IC8651 E 4.6 5.0 Q8552 C 2.2 1.3 QR8431 C 4.2 0 B 0 3.3 12 3.2 13 3.3 14 3.3 15 3.3 16 3.3 17 3.3 18 3.3 19 0 20 0 32 0.6 33 0.6 34 0.6 35 0.6 36 0.6 37 3.3 38 0.6 39 0.6 40 0.6 E 0 0 Q8560 C 0.1 0.1 B 0.7 0.7 E 0 0 Q8561 C 5.0 5.0 B 0.1 0.1 QR8571 C 3.2 0 B 0.1 3.3 B 3.9 5.0 E 3.3 3.3 12.3. MIC P.C.B. Ref No. MODE PLAY STOP 1 0 0 2 0 0 3 0 0 IC4671 4 5 -10.3 0 -10.1 0 6 0 0 7 0 0 8 11.8 12.0 1 0 0 33 2 0 0 3 0 0 IC4691 4 5 -10.3 0 -10.1 0 6 0 0 7 0 0 8 11.8 12.0 DVD-K29GCS 34 DVD-K29GCS 13 BLOCK DIAGRAM Note: Circuit voltage and waveform described herein shall be regarded as reference information when probing defect point, because it may differ from an actual measuring value due to difference of Measuring instrument and its measuringcondition and product itself. 13.1. OVERALL BLOCK DIAGRAM MECHANISM UNIT MODULE P.C.B. MIC P.C.B. IC8001 MIC OPTICAL PICK UP UNIT IC4671, IC4691 IC8251 SPINDLE MOTOR TRAVERSE MOTOR MIC AMP MOTOR DRIVE IC8651 DV2 FRONT-END PROCESSOR/ OPTICAL DISC CONTROLLER/ DIGITAL SERVO CONTROLLER/ AV DECODER LOADING MOTOR IC8421 MIXL AUDIO D/A CONVERTER MIXR 16Mbit FLASH ROM DIGITAL AUDIO OUT (COAXIAL) IC6001 TRAY FL OPERATION CPU IC3501 IC8611 KEY VIDEO OUT(LINE) Y PB PR VIDEO DRIVER 16Kbit EEP ROM IC8051 64Mbit SDRAM MOTHER P.C.B. REMOTE CTL OPERATION P.C.B. MOTHER P.C.B. DVD-K29GCS OVERALL BLOCK DIAGRAM 35 DVD-K29GCS 13.2. POWER SUPPLY BLOCK DIAGRAM PRIMARY CIRCUIT SECONDARY CIRCUIT IC6001 L1001 D1011,C1011 (OPERATION CPU) T1021 FL AC SOCKET P1001 VA1002 SURGE KILLER 10 LINE FILTER RECTIFIER F1001 NSW+9V NSW-12V VCC VEE AUDIO OP AMPS DGT8 40 DGT11 37 POWER TRANSFORMER Q1125 11 REG. D+1.2V SEG0 41 Q1126 SEG15 56 SWITCH A+5V Q1115 12 D+5V REG. QR1115 N.POWER OFF L SWITCH 63 N.P.OFF L IC1151 IC1021 CONSTANT VOLTAGE CONTROL (REG.M+9V) 2 ON/OFF 1 IN OUT 3 15 16 M+9V IC1195 REG. IR6131 NSW+3.3V REMOTE CTL 21 1 IR RECEIVER OPEN/CLOSE 15 RESET S6151 POWER STANBY D6101 32 STANBY LED Q1051 PHOTO COUPLER S6152 AN2 4 PLAY SHUNT IC1101 REG. S6172 AN1 5 QUICK OSD PAUSE IP1171 PROTECTOR FLH- S6171 AN0 6 S6162 STOP S6161 9 OSC2 X6001 10 OSC1 DVD-K29GCS POWER SUPPLY BLOCK DIAGRAM 36 DVD-K29GCS 13.3. SERVO BLOCK DIAGRAM RF SIGNAL MOTOR DRIVE SIGNAL TRACKING ERROR SIGNAL FOCUS ERROR SIGNAL IC8251 IC8001 (DV2) (MOTOR DRIVE) VO2+ VIN9 OPTICAL PICK UP UNIT VIN10 VIN5 PHOTO DETECTOR VIN6 B1 B2 A1 A4 B4 A2 A3 B3 VIN7 HEAD AMP VIN8 VIN1 VIN2 VIN3 VIN4 LASER DIODE(DVD) 129 75 TRSDRV 6 VIN2 LEVEL SHIFT 134 133 147 TRDRV 22 VO2- 11 + + BIAS1 TRAVERS MOTOR VIN4 OPIN+ 25 132 VO1+ 131 148 FODRV 23 VIN5 138 137 LEVEL SHIFT 76 SPDRV 5 VO1- OPIN- + 140 AD1 27 SPINDLE MOTOR 13 + VIN1 136 135 14 + + - OPOUT VO3+ 26 10 + LPC01 LPC1 124 FROM IC6001-16,17PIN 123 7 LEVEL SHIFT VIN3 LPC02 LPC2 126 VO3- RFINP 9 BIAS2 IC8251-15,16,17,18 4Vp-p(0.5msec./div.) 125 79 RFINN M2601 LOADING MOTOR + + Q8561, Q8562 LD DRIVE 12 + Q8551, Q8552 LD DRIVE LASER DIODE(CD) 130 MUTE1 3 OPTICAL PICK UP UNIT ACTUATOR CH1 MUTE + VO4+ TRACKING COIL ACT T+ 17 110 83 111 MUTE2 4 LEVEL SHIFT CH2,4,5 MUTE VO4- + + + VO5+ VO5- ACT T- 18 FOCUS COIL ACT F+ 15 ACT F- 16 LEVEL SHIFT + + IC6001 (OPERATION CPU) CH3 MUTE MUTE3 TRAY MUTE 1 18 CLOSE SW TRAY CLOSE 25 S2601 OPEN SW TRAY OPEN 24 S2602 DVD-K29GCS SERVO BLOCK DIAGRAM 37 DVD-K29GCS 13.4. VIDEO BLOCK DIAGRAM IC8001 (DV2) DAC5OUT 158 DAC4OUT 156 OPTICAL PICK-UP UNIT DAC2OUT 151 DAC3OUT 152 (16M FLASH ROM) 29 DQ0 31 33 35 38 40 42 44 30 32 34 36 39 41 43 45 DQ15 A0 25 A8 8 A15 1 DATA XCE 26 ADDRESS XWE 11 A16 A17 A18 A19 A20 48 17 16 9 10 Y B Y/PY/G C CB/PB/B D CR/PR/R E 23 A0 39 37 51 24 40 36 50 A7 ADDRESS A7 18 ADDRESS A 110 RFINN 111 RFINP DAC1OUT 149 IC8651 C 25 A8 41 33 47 27 42 32 46 A15 30 43 31 45 21 A16 A17 A18 A19 A20 IC8051 (64M SDRAM) IC8001-152 0.49Vp-p(20usec./div.) ADDRESS MEMORY ADDRESS 12bit XOE 28 52 NEXOE 22 NEXWE 38 NEXCE 212 EXADT0 210 207 204 200 198 195 193 192 194 197 199 203 206 208 211 EXADT15 MEMORY DATA 16bit DATA A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 23 24 25 26 29 30 31 32 33 34 22 35 227 224 221 217 220 223 226 228 233 238 230 237 MA0 MA1 MA2 MA3 MA4 MA5 MA6 MA7 MA8 MA9 MA10 MA11 DQ0 2 DQ1 4 DQ2 5 DQ3 7 DQ4 8 DQ5 10 DQ6 11 DQ7 13 DQ8 42 DQ9 44 DQ10 45 DQ11 47 DQ12 48 DQ13 50 DQ14 51 DQ15 53 17 MDQ0 14 MDQ1 11 MDQ2 8 MDQ3 5 MDQ4 2 MDQ5 256 MDQ6 252 MDQ7 254 MDQ8 1 MDQ9 4 MDQ10 7 MDQ11 10 MDQ12 13 MDQ13 15 MDQ14 18 MDQ15 CS NRAS CAS WE CLK 240 NCSM 244 NRAS 245 NCAS 248 NWE 243 MCK 19 18 17 16 38 MEMORY ADDRESS 12bit IC8001-149 0.92Vp-p(20usec./div.) IC8001-151 0.49Vp-p(20usec./div.) IC8001-158 0.6Vp-p(20usec./div.) IC8001-156 0.92Vp-p(20usec./div.) MEMORY DATA 16bit NRST 73 FROM IC8601-2PIN DVD-K29GCS VIDEO BLOCK DIAGRAM 38 DVD-K29GCS VIDEO MAIN SIGNAL IC3501 (VIDEO DRIVE) BIAS 2 A CIN 4dB LPF 2dB 75 DRIVER 8dB 75 DRIVER 2dB 75 DRIVER COUT 6.75MHz -6dB + CVBS OUT 16 JK4401 VIDEO OUT 15 CLAMP 4 B YIN 4dB LPF YOUT 14 JK4401 S-VIDEO OUT 6.75MHz MUTE BIAS 1.4V MUTE JK4401 CLAMP C 6 CYIN 4dB LPF 2dB 75 DRIVER 2dB 75 DRIVER 2dB 75 DRIVER CYOUT 13 Y 12 PB 11 PR 13.5MHz BIAS 8 D CBIN 4dB LPF CBOUT 6.75MHz BIAS E 9 CRIN 4dB LPF CROUT 6.75MHz IC3501-11 1.2Vp-p(20usec./div.) DVD-K29GCS VIDEO BLOCK DIAGRAM IC3501-12 1.2Vp-p(20usec./div.) IC3501-16 1.5Vp-p(20usec./div.) IC3501-15 2.0Vp-p(20usec./div.) IC3501-13,14 2.0Vp-p(20usec./div.) DVD-K29GCS VIDEO BLOCK DIAGRAM 39 DVD-K29GCS 13.5. AUDIO BLOCK DIAGRAM IC8001 (DV2) DACCK 163 MCLK 1 (AUDIO D/A CONVERTER) SMUTE/CSM ACKS/C CLK DIF0/CDTI STBDAC 53 SBT3 56 STO3 57 LRCK LRCK 169 BICK SRCK 170 SDTI ADOUT3 171 6 7 8 3 DE-EMPHASIS CONTROL µP INTERFACE 4 2 AUDIO MAIN SIGNAL IC8421-10,11 0.44Vp-p(0.5msec./div.) IC8421 11 ATT 8X INTERPOLATOR ∆Σ MODULATOR SCF LPF ATT 8X INTERPOLATOR ∆Σ MODULATOR SCF LPF AUDIO DATA INTERFACE JK4401 IC4301 CLOCK DIVIDER AOUTL 2 AMP 1 MIX L IC4301 10 AOUTR 6 AMP 7 MIX R Q4950, QR4307,4308 MUTE Q4422 QR4302,QR4306 MUTE MUTE Q4423 MUTE QR4304 FROM IC6001-26PIN SWITCHING IC8001-171 5Vp-p(10usec./div.) Q4302 SWITCHING NP-MUTE FROM IC6001-62PIN A-MUTE FROM IC8001-55PIN QR8431 Q4940 SWITCHING ATT. Q4947 Q4924 MUTE CONTROL MUTE FROM IC6001-19PIN Q4948 MUTE IC4671 J4671 MIC 1 1 MIC 3 AMP IC4691 (MIC AMP) 7 6 1 2 VR2102 (MIC VOL) IC4671 J4672 MIC 2 7 MIC 5 AMP MIC DET Q4751 IECOUT 177 TO IC6001-27PIN JK4401 DIGITAL AUDIO OUT (COAXIAL) AMP DVD-K29GCS AUDIO BLOCK DIAGRAM 40 DVD-K29GCS 14 INTERCONNECTION SCHEMATIC DIAGRAM & SCHEMATIC DIAGRAM NOTES 14.1. INTERCONNECTION SCHEMATIC DIAGRAM MIC P.C.B. OPTICAL PICK UP UNIT E T+ F+ FTHFM TA(DVD) TB(DVD) TD(DVD) TC(DVD) FE2(DVD/CD) FE1(DVD/CD) GND RF VREF2(RF-) PIN(DVD) LDCD LDGND LDDVD GND(OEIC) VREF1 VCC SUB2 SUB1 PIN(CD) SUBSEL GND(VRCD) DGND D+5V DGND A+5V AGND D+1.2V DGND M+9V MGND TRAY DRV TRAY MUT DOP CPU-CLK DOP CPU-CMD DOP CPU-STAT C 6 5 4 3 2 1 DGND DGND FP6103 1 2 P4602 1 GND 2 GND MICDET MICOUT ADGND +9V -9V FP6154 1 2 3 4 5 P4601 1 2 3 4 5 FP8101 MIX-L 1 ADGND 2 MIX-R 3 4 ADGND 5 A-REF 6 ZFLAG & AMUTE 7 ADGND 8 AUDIODIGITAL ADAC5V 9 LD10 LD+ 11 12 CR/PR/R 13 VGND 14 CB/PB/B VGND 15 16 Y/PY/G VGND 17 18 Y VGND 19 20 C MICDET MICOUT ADGND +9V -9V OPERATION P.C.B. FP3502 MIX-L 1 ADGND 2 3 MIX-R 4 ADGND 5 A-REF 6 ZFLAG & AMUTE 7 ADGND 8 AUDIODIGITAL ADAC5V 9 10 LD11 LD+ CR/PR/R 12 13 VGND CB/PB/B 14 15 VGND 16 Y/PY/G VGND 17 18 Y 19 VGND 20 C REMOCON NSW+3.3V DGND KEY-SCAN3 KEY-SCAN2 KEY-SCAN1 FP6102 1 2 3 4 5 6 FP6101 REMOCON 1 NSW+3.3V 2 DGND 3 4 KEY-SCAN3 5 KEY-SCAN2 6 KEY-SCAN1 MOTHER P.C.B. TRV INNER SW DGND TRVM+ TRVMSPM+ SPMFP2001 1 LDLD2 3 LD+ 4 LD+ 5 CLOSE-SW 6 GND(SW) OPEN-SW 7 TRV INNER SW DGND TRVM+ TRVMSPM+ SPM- FP3501 DGND 1 D+5V 2 3 DGND 4 A+5V 5 AGND D+1.2V 6 7 DGND 8 M+9V 9 MGND 10 TRAY DRV TRAY MUT 11 12 DOP CPU-CLK 13 DOP CPU-CMD DOP CPU-STAT 14 MODULE P.C.B. D FP8201 6 5 4 3 2 1 FP8102 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PJ6101 KEY-SCAN1 1 2 DGND STBYLED 3 FP8501 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 F KEY-SCAN1 DGND STBYLED LDLDLD+ LD+ CLOSE-SW GND(SW) OPEN-SW B PJ6101 1 2 3 FP2601 1 2 3 4 5 6 7 MECHANISM UNIT LOADING MOTOR P.C.B. A POWER SW P.C.B. DVD-K29GCS INTERCONNECTION SCHEMATIC DIAGRAM 1 2 3 4 5 41 6 7 8 9 DVD-K29GCS 14.2. SCHEMATIC DIAGRAM NOTES This schematic diagram may be modified at any time with the development of new technology. Important safety notice: Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purpose of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used. When replacing any of components, be sure to use only manufacture´s specified parts shown in theparts list. Important safety notice: There are special components used in this equipment which are important for safety. These parts are marked by in the schematic diagrams. It is essential that these critical parts should be replaced with manufacturer’s specified parts to prevent shock, fire, or other hazards. Do not modify the original design without permission of manufacturer. Caution! IC and LSI are sensitive to static electricity. Secondary trouble can be prevented by taking care during repair. Cover the parts boxes made of plastics with aluminum foil. Ground the soldering iron. Put a conductive mat on the work table. Do not touch the legs of IC or LSI with the fingers directly. 42 DVD-K29GCS 15 SCHEMATIC DIAGRAM 15.1. POWER SUPPLY SECTION (MOTHER P.C.B. (1/2)) SCHEMATIC DIAGRAM Q1125 2SB14170JA D1121 B0JAMG000013 C1003 ECKMNA471MBV C1121 6V1000 C1122 6V2200 Q1126 XN0150100L G - T1021 G4D2A0000223 (POWER TRANSFORMER) 2 TL1007 + 1 R1128 120 18 2 17 3 16 4 15 R1126 3600 3 5 R1041 68 D1041 B0HAGM000006 C1041 50V56 Q1045 2SC3311ASA C1051 820P 14 6 13 7 12 8 11 9 10 4 TP1108 MGND F AV A+5V F AV D+5V F AV M+9V F AV NSW+9V F AV FLH+ F AV FLH- F AV NSW-12V F AV NPOFF L F AV NSW+3.3V AV RESET AV TP1105 3 L1117 G0C100JA0048 C1111 10V1000 R1072 1K 5 2 6 C1116 10V220 1 C1117 6V1000 IC1151 C0DBZHG00047 (REG.M+9V) D1071 MAZ41000MF QR1115 B1GBCFNN0036 (SWITCHING) R1062 12K D1152 B0JAML000011 L1151 G0A220GA0026 K1154 C1061 120P R1085 100K 1 2 3 4 5 TP1107 R1061 22K D F AV L1111 G0A100HA0023 C1071 0.068 D1084 MAZ41600LF AGND (REG.5V) D1111 B0JAMG000013 R1116 1K R1071 1500 R1051 20K TP1106 C1004 ECKMNA102MEV D1072 MA2C16500E D1051 MAZ40680MF 5 CONSTANT VOLTAGE CTL. R1045 27K E F AV GND 1 C1045 25V47 DGND Q1115 B1DHDD000029 C1115 0.1 D1046 MAZ42400MF DRAIN F/B VCC GND 4 Z/C 2 D1031 B0HADV000001 D1045 MAZ42000LF R1046 10 (SW IC) TP1104 2 R1125 270 R1115 100K IC1021 C0DACZH00024 F AV 3 TL1005 C1021 F1A3D470A010 VGND 4 NC 4 D1125 MA2J11100L C1125 0.1 OUT C1002 ECQU2A104MLC R1127 1300 ON/OFF 2 F AV IN 1 C1031 F1B3A332A009 R1031 68K R1001 470K C1012 450V10 VA1002 ERZVA5Z471 C1001 ECQU2A104MLC 3 3 C1112 10V1000 F 4 ADGND TP1112 TL1006 F1001 FUSE K5D162BLA013 TL1004 R1002 470K TL1002 5 C1011 450V10 K1006 ZA1002 EYF52BCY ZA1001 EYF52BCY P1001 K2AA2B000009 L1001 ELF15N003A F AV 1 D1011 B0EDKT000009 K1005 A D+1.2V C1127 6V1000 C1126 1000P (REG.D+1.2V) TL1001 TP1101 (REG.D+1.2V) K1121 D1081 MA2C18500E D1151 B0JAML000011 R1081 27K C1083 50V47 K1155 D1153 B0EAKM000122 C1153 25V330 C1155 0.1 C1154 16V220 TP1111 L1131 G0C330KA0065 C1151 25V330 TP1116 R1082 10K Q1082 2SC3311ASA CONSTANT VOLTAGE CTL. D1171 B0JAME000037 R1083 5600 D1083 MAZ41000HF Q1081 2SC3311ASA CONSTANT VOLTAGE CTL. C1082 0.1 R1084 22K K1172 D1082 MA2C16500E C1171 10V100 IP1171 B1ZAZ0000030 C1081 1000P 2 TP1115 1 C TP1113 L1141 G0C330KA0065 D1141 B0JAML000011 C1141 25V100 ZA1112 K4CZ01000027 TP1109 B IC1101 C0DAEMB00003 R1191 100K C1197 1 (SHUNT REG.) Q1051 B3PBA0000241 (FEED BACK) A C R1052 4 1 1 3 5 VB R IC1195 C0DBFGC00008 R1105 1K 3 (REG.NSW+3.3V) VDD 1 2 R1104 1K A A :PO(POWER SUPPLY SECTION) B :F/AV(FRONT & AV OUT SECTION) 1 2 HOT 3 4 5 COLD 6 43 4 RST 2 7 C1102 0.1 R1107 10K C1101 0.68 R1106 1200 8 R1102 1200 GND 2 CD 3 R1101 75 R1103 1200 C1110 1000P 9 C1196 0.01 C1195 1 10 DVD-K29GCS POWER SUPPLY SECTION (MOTHER P.C.B.(1/2)) SCHEMATIC DIAGRAM 11 DVD-K29GCS 15.2. FRONT & AV OUT SECTION (MOTHER P.C.B. (2/2)) SCHEMATIC DIAGRAM A B DP6081 A2BA00000217 P14 P13 4G 3G P12 P11 P10 3G P9 2G P8 P7 P6 2G P5 1G P4 P3 1G P2 P1 1G F- F- Q6085 B1ABGC000011 4G A1 P15 C3825 6V1000 P16 RESET L3801 G0C680JA0019 4G PO B C D E F+ A+5V D+5V M+9V D+1.2V ADGND AGND MGND F+ H PO PO PO PO PO PO PO 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 31 32 (FL DRIVE) CL6001 A2 A3 A4 A5 A6 14 13 12 11 10 9 8 7 6 5 4 3 2 1 R6085 8200 D6081 MAZ40910LF B3 B4 B7 B21 B6 B12 B8 B9 B20 B21 B11 B20 B16 B13 B14 B15 B17 B19 B18 A29 R4303 2200 QR4302 B1GDCFJJ0046 A7 A32 A14 B17 B16 B19 B18 B10 C6081 0.01 CL6023 D4301 MAZ40560HF A34 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 DGT9 DGT10 DGT11 DGT12 DGT13 DGT14 DGT15 C4313 0.1 A10 B15 B14 (MUTE CTL.) TL4301 A9 B13 B12 B9 B7 DGT8 A8 A11 A12 A13 R4301 3300 B11 B8 B6 B5 SEG0/DGT7 A31 B4 B3 SEG1/DGT6 C3520 6V1000 B1 B2 SEG2/DGT5 A30 SEG3/DGT4 C3519 6V1000 QR4306 B1GBCFJA0026 49 SEG8 DGT16 32 (MUTE CTL.) 50 SEG9 DGT17 31 51 SEG10 VDD3 30 52 SEG11 VDD2 29 53 SEG12 LED2 28 54 SEG13 LED1 27 55 SEG14 LED0 26 A35 R4329 2.2K A15 C4310 6V47 R4368 100 C4309 6V47 R4367 100 R4302 10K A16 Q4302 B1ABCF000138 A33 A17 A26 (MUTE CTL.) TL4303 PO B5 B2 SEG4/DGT3 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B10 B1 R4313 22K L4291 G0C391JA0064 R4309 22K TO FP8101 MODULE P.C.B. FP3502 C VGND Y VGND Y/PY/G VGND CB/PB/B VGND CR/PR/R LD+ LDADAC5V AUDIO DIGITAL ADGND ZFLAG & AMUTE A-REF ADGND MIX-R ADGND MIX-L CL6012 CL6013 CL6014 CL6015 CL6016 CL6017 CL6018 CL6019 CL6020 CL6021 CL6011 CL6010 CL6009 CL6008 CL6007 CL6006 CL6005 CL6004 CL6003 CL6002 R4320 2.2K R6081 270 F E R4304 2.2K SEG5/DGT2 TO FP8102 MODULE P.C.B. FP3501 OP CPU-STAT OP CPU-CMD OP CPU-CLK TRAY MUT TRAY DRV MGND M+9V DGND D+1.2V AGND A+5V DGND D+5V DGND R6086 100K SEG6/DGT1 G CL6022 FLH+ FLH- SEG7/DGT0 PO PO NSW-12V L6001 G0C101JA0019 C6006 0.01 D C6005 50V10 IC6001 MN101C87AAE IRQ4 25 A36 57 VPP (OPERATION CPU) IRQ3 24 A37 A3 58 TXD,SBO0 A2 59 RXD/SBI0 A4 60 SBT0 IRQ2 23 IRQ1/ACZ 22 A38 IRQ0 21 R6003 0 C4324 25V220 TL4902 56 SEG15 61 SBO2/SDA TM7IO 20 62 SBI2/AN7 TM3IO 19 63 SBT2/SCL TM2IO 18 1 2 3 2 XO MMOD XRST RMOUT/TM0IO 4 5 6 7 8 9 10 11 12 13 14 15 16 R6002 0 XI 3 R6072 47K R6009 10K VSS 2 TM1IO 17 R6008 47K OSC1 (POWER SUPPLY) A39 A5 K6007 OSC2 (POWER SUPPLY) 2 VDD QR4901 XN0431100L 3 1 64 BUZZER/AN6 6 QR4902 XN0431100L 1 VREF+ 5 AN0 4 AN1 TO P4602 MIC P.C.B. FP6103 DGND DGND 6 AN2 C 5 AN3 A25 4 AN4 A33 AN5 CL6028 K4902 A6 R6071 30K A1 1 X6001 H2D800400009 1 R6011 1K 3 R6006 10K K4901 PO NSW+9V PO NPOFF L PO NSW+3.3V 2 A25 TL4901 R6000 0 C6003 0.01 B C6002 0.1 TO P4601 MIC P.C.B. FP6154 MICDET MICOUT ADGND +9V -9V A PO PO C6001 6V100 A40 A41 A :PO(POWER SUPPLY SECTION) B :F/AV(FRONT & AV OUT SECTION) VGND DGND 1 A42 A26 A27 1 2 3 4 5 2 3 4 R6022 5 6 7 44 8 R6023 10K R6025 10K R6040 10K R6050 10K R6060 10K R6024 R6026 C6040 0.01 C6050 0.01 C6060 0.01 9 DVD-K29GCS FRONT & AV OUT SECTION(MOTHER P.C.B.(2/2)) SCHEMATIC DIAGRAM 10 11 12 F G DVD-K29GCS A A A44 B A45 A52 B C D E B C C4415 25V47 R4356 15K C4314 0.1 R4423 47K C4337 82P C4323 25V220 8 VCC 7 6 5 + IC4301 C0ABBB000118 + - 1 2 (AMP) 3 VEE 4 C4414 25V47 C4336 82P R4355 15K C4315 0.1 R4422 47K K4312 A15 A30 A17 A16 R4331 9.1K R4332 9.1K R4312 22K R4311 100K R4310 100K Q4947 B1ABCF000138 Q4948 B1ABCF000138 (MUTE) (MUTE) R4947 820 R4948 820 R4949 10K R4414 0 Q4949 UNR221100L R4415 0 (MUTE CTL.) 6 5 4 QR4305 XN0431100L R4402 8.2K A32 R4401 8.2K (MUTE CTL.) A35 R4950 1.2K 1 2 3 R4307 1K A27 A31 R4417 1K R4940 470 R4951 820 (SWITCHING) Q4940 B1ABCF000138 QR4308 UNR211100L (ATTENUATOR) (SWITCHING CTL.) R4316 4.7K Q4950 2SD0601ARL 6 5 4 QR4304 XN0431100L (SWITCHING CTL.) 1 2 3 R4404 0 QR4307 UNR221100L R4403 10K R4308 2.2K (SWITCHING) F D DVD-K29GCS FRONT & AV OUT SECTION(MOTHER P.C.B.(2/2)) SCHEMATIC DIAGRAM G 13 14 15 DVD-K29GCS FRONT & AV OUT SECTION(MOTHER P.C.B.(2/2)) SCHEMATIC DIAGRAM 16 17 18 19 45 20 21 22 23 24 E DVD-K29GCS A VIDEO MAIN SIGNAL B C AUDIO MAIN SIGNAL B JK4401 K2YZ19000001 ZA4701 RMCC0001 R3535 75 C3513 6V1000 LB3535 J0JBC0000117 17 PB 16 PR 15 VGND 14 Y 13 V 12 VGND 4 METAL GND 11 CK 10 CK GND 7 Y(S) C3512 6V1000 ZA4751 K4CZ01000027 C3514 6V1000 R4752 1K LB3532 J0JBC0000117 LB3531 J0JBC0000117 R3537 10K Q4751 B1ABCF000138 C4751 25V47 LB3533 J0JBC0000117 R3531 75 C3517 0.1 A14 LB3534 J0JCC0000186 R3532 75 C3515 6V1000 R4751 1K LB3536 J0JBC0000117 R3534 75 R3533 75 C3516 6V1000 C4703 0.1 C4781 25V47 R3536 75 5 (AMP) R4753 1K 9 C3511 1 A11 6 R4755 75 A52 10 A45 R4428 680 C4427 1000P IC3501 C9ZB00000498 VCC CIN BIAS YIN MUTE CYIN GND1 CBIN A29 2 3 4 5 6 7 8 C(S) 3 MIX-L 2 MIX-R 1 A-GND Q4422 B1ABCF000138 (VIDEO DRIVE) 1 8 R4459 220 9 CNIN 11 GND2 12 CBOUT 13 CROUT 14 YOUT R4754 220 VOUT 15 COUT 16 R4756 10K CYOUT C4752 25V47 R4452 820 (MUTE) R4451 820 Q4423 B1ABCF000138 Q4924 UNR211100L L3501 G0C220JA0019 (MUTE CTL.) C3510 1 C3505 0.1 A10 C3518 6V47 A39 R4460 220 (MUTE) C3509 1 A9 A44 C3506 0.01 C3507 6V22 R4429 680 A7 C4423 1000P C3508 1 A8 C4431 0.1 C4050 0.1 POWER SW P.C.B. C4432 0.1 C4591 0.1 POWER SW S6152 EVQ11G07K EVQ11407KJ CL6026 PJ6101 KEY-SCAN1 1 DGND 2 STBY LED 3 A42 A34 R6101 470 D6101 B3AAA0000721 (RED) CL6027 OPERATION P.C.B. ROUT GND VCC IR6131 B3RAD0000070 (REMOTE CTL.RECEIVER) S2601 K0L1BA000078 TL2601 FP2001 LDLDLD+ LD+ CLOSE-SW GND(SW) OPEN-SW A13 A12 A36 A37 1 2 3 4 5 6 7 1 2 3 4 5 6 7 FP2601 LDLDLD+ LD+ CLOSE-SW GND(SW) OPEN-SW LD-MOTOR MT2601 MDN3BL3CVF 1 2 3 3 1 4 2 FP6102 REMOCON NSW+3.3V DGND KEY-SCAN3 KEY-SCAN2 KEY-SCAN1 A38 A40 A41 S2602 K0L1BA000078 3 1 4 2 1 2 3 4 5 6 FP6101 1 REMOCON 2 NSW+3.3V 3 DGND 4 KEY-SCAN3 5 KEY-SCAN2 KEY-SCAN1 6 C6132 0.1 L6131 R6151 1200 R6161 1200 R6171 1200 TL2602 ZA1112 K4CZ01000027 S6151 EVQ11G07K EVQ11407KJ LOADING MOTOR P.C.B. OPEN/ CLOSE S6172 EVQ11G07K EVQ11407KJ PLAY QUICK OSD DVD-K29GCS FRONT & AV OUT SECTION(MOTHER P.C.B.(2/2)) SCHEMATIC DIAGRAM 25 26 27 S6161 EVQ11G07K EVQ11407KJ S6171 EVQ11G07K EVQ11407KJ STOP PAUSE DVD-K29GCS FRONT & AV OUT SECTION (MOTHER P.C.B.(2/2)) SCHEMATIC DIAGRAM D E S6162 EVQ11G07K EVQ11407KJ 28 29 30 31 46 32 33 34 35 36 DVD-K29GCS 15.3. MODULE SCHEMATIC DIAGRAM A A15 B ERJ2GE0R00X ERJ2GE0R00X ERJ2GEJ101X ERJ2GEJ101X ERJ2GEJ101X A1 A2 A3 K8102 0 CL8234 17 16 15 VO5- 18 VO5+ 19 VO4- 20 VO4+ 21 PGND 30 PVCC12 22 PVCC45 23 VIN4 OPIN- 24 GND 25 VIN5 26 OPIN+ 27 1 29 11 12 13 14 5 NC 10 6 CONT 9 7 NC 8 8 VIN 7 VO1+ 6 VO1- 5 VO2+ 4 VO2- 3 VO3+ 2 VO3- 1 PVCC3 (MOTOR DRIVE) IC8111 C0CBCBD00018 E17 E18 (REG.D+3.3V) GND CN C8505 220P NC C8504 0.1 VO C8503 0.1 3 C8111 0.1 C8257 0.1 R8505 2200 R8501 0 2 IC8251 C0GBG0000054 VIN3 E15 E16 3 1 28 BIAS2 E13 E14 1 2 3 4 C8113 470P TL8111 E5 C8241 0.1 TL8201 CL8242 C8242 0.1 D C CL8244 C8112 1 R8254 0 E21 E19 E23 E22 B5 14 13 12 11 10 9 AOUTR P/S QR8571 B1GDCFEC0001 IC8421 C0FBBK000047 DIFO/CDTI R8560 1K 15 ACKS/CCLK A14 16 AOUTL (SWITCHING) VSS Q8550 B1ADHG000003 A13 SMUTE/CSN R8326 10 A12 VCOM J0JCC0000371 C8421 6V100 PDN J0JCC0000371 LB8302 C8422 0.1 VDD LB8301 R8550 7500 A11 LRCK J0JCC0000371 SDTI LB8303 R8431 2200 A9 A10 DZFL J0JCC0000371 K8421 0 B4 B5 DZFR LB8304 A8 BICK ERJ2GE0R00X ERJ3GEY0R00V ERJ3GEY0R00V J0JCC0000371 B2 B1 C8425 6V33 B3 MCLK LB8491 LB8006 LB8005 LB8305 B3 B2 R8341 82 ERJ2GE0R00X ERJ2GE0R00X R8331 180 LB8423 LB8424 B1 R8335 82 ERJ2GE0R00X R8321 160 LB8422 R8332 10 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ERJ2GE0R00X K8105 0 B E20 B4 LB8421 R8325 160 TO FP3502 MOTHER P.C.B. (F/AV SECTION) FP8101 MIX-L ADGND MIX-R ADGND A-REF ZFLAG & AMUTE ADGND AUDIODIGITAL ADAC5V LDLD+ CR/PR/R VGND CB/PB/B VGND Y/PY/G VGND Y VGND C R8322 10 C (SWITCHING) C8237 1000P A19 1 3 4 2 E4 QR8111 XP0621400L R8255 0 C8550 6V33 RX8503 56X2 E3 C8238 820P VIN2 J0JCC0000371 ERJ2GE0R00X J0JHC0000097 R8262 4700 VIN1 LB8504 LB8503 LB8502 4 A18 R8264 4700 MUTE2 100P R8265 0 MUTE1 C8506 E1 E2 J0JCC0000371 5 R8236 8200 OPOUT LB8505 CL8231 6 E11 E12 1 3 2 4 1500 C8251 6V220 1 3 CL8236 RX8504 56X2 RX8501 56X2 R8506 RX8111 22KX2 C8235 1000P A17 E7 E8 E9 E10 2 4 6 8 2 4 C8254 0.1 C8255 0.1 BIAS1 1 2 3 4 5 6 A4 A5 A6 A7 C8236 1000P C8252 16V47 C8256 0.1 TO MECHANISM UNIT FP8201 SPMSPM+ TRVMTRVM+ DGND TRV INNER SW ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V ERJ3GEY0R00V J0JCC0000371 1 3 5 7 K8104 0 E6 RX8502 56X4 LB8514 LB8513 LB8512 LB8511 LB8507 2 4 A16 R8263 82K LB8003 LB8004 LB8691 LB8693 LB8692 MUTE3 E A5 CL8235 R8261 82K F A4 R8235 8200 C8502 0.1 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A6 K8101 0 C8501 10 TO OPTICAL PICKUP UNIT FP8501 T+ F+ FTHFM TA(DVD) TB(DVD) TD(DVD) TC(DVD) FE2(DVD/CD) FE1(DVD/CD) GND RF VREF2(RF-) PIN(DVD) LDCD LDGND LDDVD GND(OEIC) VREF1 VCC SUB2 SUB1 PIN(CD) SUBSEL GND(VRCD) A7 K8103 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 L8550 G1C100KA0055 G TO FP3501 MOTHER P.C.B. (F/AV SECTION) FP8102 DGND D+5V DGND A+5V AGND D+1.2V DGND M+9V MGND TRAY DRV TRAY MUT DOP CPU-CLK DOP CPU-CMD DOP CPU-STAT 1 2 3 4 5 6 7 8 (SWITCHING) (AUDIO A/D CONVERTER) Q8560 B1ABDF000018 (SWITCHING) CL8571 C8423 0.1 QR8431 B1GBCFJJ0047 A D8571 MA2J72800L C8426 0.1 R8420 330 CL8423 CL8422 CL8421 D R8569 12K R8570 100K (SWITCHING) D8550 MA2J11100L R8421 47 E25 E24 E27 E26 E28 E30 E29 E6 E34 E F DVD-K29GCS MODULE SCHEMATIC DIAGRAM 1 2 3 4 5 6 47 7 8 9 10 11 G DVD-K29GCS A A A20 B C LB8001 LB8002 B J0JHC0000097 J0JHC0000097 D C8002 4V330 C8001 6V100 C8027 0.1 C8028 1 A21 A23 A24 A25 C8026 1 C8025 0.1 C8024 2200P C8023 1 C8022 0.1 C8021 0.1 C8020 0.1 C8019 1 C8018 0.1 A26 A22 E F FDT 8 FDT 7 FDT 9 FDT 6 FDT 5 FDT 10 FDT 4 FDT 11 FDT 3 FDT 12 FDT 2 FDT 13 FDT 0 C13 FDT 14 C14 FDT 1 C12 C11 2 4 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 142 141 140 139 138 137 136 135 134 133 132 131 130 129 R8041 33 CL8040 C8014 0.1 R8404 100 R8402 100 A8 E26 E44 E45 C8015 1 R8622 390 R8621 1M R8401 47K LB8401 ERJ2GEJ151X C8302 6V33 0 C8312 R8313 1 24K X8621 H0J270500080 E24 1 C8308 15P R8314 C8622 22P C8621 15P C8304 L8302 J0JCC0000079 A13 R8315 6.8 R8311 2400 A12 L8301 G1C100KA0055 A9 A10 A11 A16 A18 A19 C8234 0.1 C8232 0.1 C8303 0.1 C8311 0.1 C8301 6V220 R8312 1K L8202 J0JCC0000079 E7 E8 E9 E10 E16 E15 E11 E12 D8231 MA2J11100L A17 R8231 10K A15 C8206 1 CL8206 C8202 6V100 RX8401 100X2 VHALF VREFH LPCO2 LPC2 LPCO1 LPC1 AVSSB C8017 0.1 RX8031 4.7KX2 MDQ24 VSS VDD33 TRCST TRCDATA3 TRCDATA2 TRCDATA1 TRCDATA0 TRCCLK EXTRG1 SDATA EXTRG0 SCLOCK VSS VDD33 IECOUT ADOUT0 ADOUT1 ADOUT2 VSS VDD12 ADOUT3 SRCK LRCK EXTCK VDD33 OSCO OSCI VSS DACCK AVSSG AVDDG AVSSE AVDDE DAC5OUT AVSSF DAC4OUT COMP IREF1 VREF DAC3OUT DAC2OUT AVDDF DAC1OUT PWM0 PWM1 VCOF/AD4 AVSSH VREFH10 AD0 VREFL10 AVDDH AD1 AD2 VIN1 VIN2 VIN3 VIN4 VIN5 VIN6 VIN7 VIN8 VIN9 VIN10 VREFL5 VREFM5 VREFH5 AVDDB VIN1RF VIN2RF VIN3RF VIN4RF VIN5RF VIN6RF RFINP RFINN ANAMONI2 ANAMONI1 AVDDC CDATA AVSSC CCAPA VREFL7 VREFM7 VREFH7 AVSSD PLFIL1 AVDDD MONI0 MONI1 MONI2 MONI3 VSS MONI4 MONI5 C8016 1 1 3 MDQ23 MDQ25 VDD33 MDQ22 MDQ26 MDQ21 MDQ27 VSS MDQ20 VDD33 MDQ28 VSS MDQ19 MDQ29 MDQ18 MDQ30 VDD33 MDQ17 MDQ31 VSS MDQ16 DQM3 DQM2 VDD33 VSS MA3 MA4 VDD12 VSS MA2 MA5 MA1 MA6 VDD33 MA0 VSS MA7 MA10 BA1 VDD33 BA0 MA8 VSS VDD12 MA9 MA11 NCSM VDD33 VSS MCKI MCK NRAS NCAS VSS VDD33 NWE VSS DQM0 DQM1 VSS MDQ7 MDQ8 MDQ6 P6 CL8611 MONI6 CL8612 VDD12 CL8027 MONI7 CL8026 VSS CL8022 A14 E29 E30 P17 E28 CL8021 CL8023 CL8025 C8 P16 0.1 VDD33 C8010 EXADT 7 EXADT 3 NEXOE DRV8 0.1 DRV7 C8009 EXADR 19 EXADT 15 EXADT 11 R8021 10K C10 (DV2) DRV6 C8008 0.1 DRV5 C CL8024 C9 IC8001 RFKVDS39BKIT DRV4 0.1 EXADR 16 EXADR 18 EXADT 14 EXADT 10 EXADT 6 EXADT 2 NEXCE EXADT 1 EXADT 5 EXADT 9 EXADT 13 EXADR 17 C7 C4 DRV3 0.1 C8007 DRV2 C8006 EXADT 12 DRV1 C8005 0.1 EXADR 20 NEXWE EXADT 0 EXADT 4 EXADT 8 DRV0 RX8011 82X4 VSS 7 5 3 1 NRST 8 8 4 2 RX8012 82X4 FG 1 3 5 7 P0 2 4 6 8 MDQ9 MDQ5 VSS MDQ10 MDQ4 VDD33 MDQ11 MDQ3 VSS MDQ12 MDQ2 VDD33 MDQ13 MDQ1 MDQ14 VSS MDQ0 MDQ15 VDD33 VSS EXADR20 NEXWE EXADT0 EXADT4 EXADT8 VDD12 EXADT12 VDD33 VSS EXADR16 EXADR18 EXADT14 EXADT10 VDD33 VSS EXADT6 EXADT2 NEXCE EXADT1 EXADT5 EXADT9 EXADT13 EXADR17 VDD12 EXADR19 EXADT15 EXADT11 VDD33 VSS EXADT7 EXADT3 NEXOE P15(STBDAC) P14 P13(AMUT) P12(SBT3) P11(SBO3) P10 P9(SCL) P8(SDA) P7 VDD33 MMOD VSS P1(OP CPU CMD) E25 E27 2 4 1 3 E44 E45 C8031 0.1 E36 CL8033 CL8032 CL8031 E37 E22 E38 E23 C8012 0.1 R8023 47K D R8242 7500 R8241 22K CL8243 E35 0.1 0.1 0.1 0.1 0.1 0.1 C8223 C8224 C8225 C8226 C8227 0.018 C8216 C8222 5600P C8215 0.1 0.1 C8214 C8221 0.1 C8213 TL8212 0.1 C8212 TL8211 0.033 TL8213 TL8214 C8229 1 C8228 1 L8201 G1C100K00020 R8201 2200 CL8241 A1 A3 A2 C8211 4 2 TL8215 TL8216 TL8217 TL8218 TL8219 TL8220 CL8003 CL8002 CL8035 CL8030 R8022 10K RX8021 10KX2 CL8029 3 1 CL8028 C8011 1 CL8036 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 R8243 10K MDQ 1 MDQ 14 MDQ 0 MDQ 15 1 3 5 7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 RX8013 82X4 P2(OP CPU STAT) MDQ 3 MDQ 12 MDQ 2 MDQ 13 2 4 6 8 C6 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 P3(OP CPU CLK) MDQ 5 MDQ 10 MDQ 4 MDQ 11 C5 R8011 22 C8003 2200P P4 8 6 4 2 VDD33 7 5 3 1 C2 RX8014 82X4 P5 MDQ 7 MDQ 8 MDQ 6 MDQ 9 C3 FDT 15 C1 C8004 0.1 C8207 0.1 C8203 0.1 C8217 C8218 C8204 0.1 1 1 C8201 6V100 C8205 0.1 C8233 4700P CL8233 C8307 0.1 CL8201 C8208 0.1 E20 E34 C8013 0.1 CL8202 E18 E5 E21 E14 E9 E10 E13 E7 E39 E8 E1 E40 E17 R8233 15K E19 E4 E41 G H E F DVD-K29GCS MODULE SCHEMATIC DIAGRAM G 12 13 DVD-K29GCS MODULE SCHEMATIC DIAGRAM 14 15 16 17 48 18 19 20 21 22 I DVD-K29GCS A20 A VIDEO MAIN SIGNAL B C AUDIO MAIN SIGNAL RF SIGNAL D C8611 0.1 C8601 0.1 R8601 1K 2 4 RX8611 4.7KX2 1 3 E C3 C10 C8 C9 C7 C14 C12 C13 C11 2 4 6 8 2 4 6 8 3 VDD 8 VCC A0 A2 GND (EEP ROM) R8611 100 1 2 3 4 E36 E35 MA 4 MA 5 IC8611 C3EBGC000055 C3EBGC000044 C3EBGC000056 MDQ 8 MDQ 9 MDQ 10 MDQ 11 MDQ 12 MDQ 13 MDQ 14 5 GND 1 MA 11 MA 1 MA 6 MA 0 MA 7 1 3 5 7 A21 MDQ 15 6 A1 1 3 5 7 7 (RESET) RX8018 82X4 MA 6 1 3 5 7 MA 10 MA 8 MA 11 MA 9 1 3 RX8017 82X4 MA 7 RX8016 82X4 MA 8 RX8015 22X2 IC8601 C0EBE0000384 2 RESET MA 9 2 4 6 8 MA 3 MA 4 MA 2 MA 5 2 4 SDA C4 C5 WP C6 C1 SCL C2 F CL8034 C8056 0.1 RX8032 4.7KX2 43 42 41 40 39 VSSQ DQ14 DQ13 VDDQ DQ12 DQ11 VSSQ DQ10 DQ9 VDDQ DQ8 VSS NC UDQM 38 37 36 35 34 33 32 31 30 29 28 VSS 44 A4 45 A5 46 A6 47 A7 48 A8 49 A9 50 NC 51 A11 52 CLK 53 CKE 54 VSS E37 DQ15 C8057 2200P 1 3 2 4 IC8051 C3ABPG000133 LDQM /WE /CAS /RAS /CS BA0 BA1 A10/AP A0 A1 A2 A3 VDD 7 VDD 6 DQ7 DQ3 5 VSSQ VSSQ 4 DQ6 DQ2 3 DQ5 DQ1 2 DQ4 VDDQ 1 VDDQ VDD DQ0 (SD RAM) 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 CL8561 MA 3 MA 2 MA 1 MA 10 MA 0 C8055 1 C8054 1 MDQ 7 MDQ 6 MDQ 5 MDQ 4 MDQ 3 MDQ 2 MDQ 1 MDQ 0 C8052 0.1 C8053 220P E2 C8051 1 R8564 22 Q8561 B1ABDF000018 E40 R8561 0 Q8562 2SB09700RL (LD DRIVE) (LD DRIVE) R8568 47K R8565 2.2 R8562 1K A25 C8563 6V47 R8566 56 R8567 51 E3 26 E39 R8551 0 NC WP/ACC RDY/XBSY A18 A17 A7 A6 A5 A4 A3 A2 A1 13 14 15 16 17 18 19 20 21 22 23 24 EXADT 14 EXADT 13 EXADT 12 EXADT 11 EXADT 10 EXADT 9 EXADT 8 EXADR 19 NEXWE R8558 47K TL8512 C8554 1 C8552 16V10 R8553 1K C8553 6V47 R8556 56 R8559 15K R8557 51 E38 DVD-K29GCS MODULE SCHEMATIC DIAGRAM DVD-K29GCS MODULE SCHEMATIC DIAGRAM 23 24 25 C8551 0.1 C8561 0.1 G H I TL8513 EXADT 1 XRESET 12 EXADT 2 XWE 11 EXADT 3 A20 10 EXADT 4 A8 A19 9 EXADT 5 A9 8 EXADT 6 A10 7 EXADT 7 A11 6 EXADR 17 A12 5 EXADR 18 A13 4 EXADR 20 A15 A14 3 (LD DRIVE) R8552 1K (16M FLASH ROM) 2 Q8552 2SB09700RL (LD DRIVE) R8555 2.2 IC8651 RFKWSK82C160 1 R8554 68 Q8551 B1ABDF000018 25 A0 27 XCE 28 VSS 29 XOE 30 DQ0 31 DQ8 32 DQ1 33 DQ9 34 DQ2 35 DQ10 36 DQ3 37 DQ11 38 VDD 39 DQ4 40 DQ12 41 DQ5 42 DQ13 43 DQ6 44 DQ14 45 DQ7 46 VSS 47 EXADT 15 EXADR 16 A16 48 R8563 1K EXADT 0 NEXCE FDT 0 FDT 8 FDT 1 FDT 9 FDT 2 FDT 10 FDT 3 FDT 11 FDT 4 FDT 12 FDT 5 FDT 13 FDT 6 FDT 14 FDT 7 A26 C8562 16V10 CL8551 DQ15/A-1 C8652 0.1 XBYTE C8651 0.1 A24 K8651 ERJ2GE0R00X FDT 15 A22 E41 TL8522 C8564 1 NEXOE A23 26 27 28 49 29 30 31 32 33 DVD-K29GCS 15.4. MIC SCHEMATIC DIAGRAM AUDIO MAIN SIGNAL J4671 K2HB102J0038 1 D 2 LB4673 J0JCC0000120 R4677 1K C4681 50V1 R4557 1.2K R4680 220K 3 MIC 1 R4678 22K 4 C4678 0.001 C4691 0.082 R4567 1.2K 5 R4679 12K C4679 56P R4691 27K RV2101 5K R4693 270K 6 7 C4682 16V22 C4693 68P C4695 16V22 C 4 3 VEE 2 IN1+ (MIC AMP) IN2+ 5 1 R4673 1K 3 VEE 2 IN1+ VO1 IC4691 C0ABBB000126 + - IN26 1 IN1+ + - J4672 K2HB102J0038 LB4671 J0JCC0000120 VO1 + IC4671 C0ABBB000126 2 C4692 0.1 4 1 IN1- TO FP6103 MOTHER P.C.B. P4602 1 GND GND 2 VO2 7 VCC IN2+ 5 8 IN26 VO2 7 VCC 8 C4680 50V1 R4695 39K 3 B MIC 2 R4681 22K 4 R4676 220K C4675 0.001 TO FP6154 MOTHER P.C.B. P4601 R4694 47K C4677 56P 5 LB4601 J0JCC0000120 (MIC AMP) 1 2 3 4 5 6 7 R4675 12K C4696 16V22 C4683 16V22 MICDET MICOUT ADGND +9V -9V C4694 0.1 LB4674 J0JCC0000120 A DVD-K29GCS MIC SCHEMATIC DIAGRAM 1 2 3 4 50 5 6 7 DVD-K29GCS 16 PRINT CIRCUIT BOARD 16.1. MOTHER P.C.B. MOTHER P.C.B. LOADING MOTOR P.C.B. F E D C POWER SW P.C.B. B A DVD-K29GCS MOTHER P.C.B.(VEP76116C) POWER SW P.C.B.(VEP76117A) LOADING MOTOR P.C.B.(VEP70114A) 1 2 3 4 5 51 6 7 8 DVD-K29GCS 16.2. MOTHER P.C.B. & MODULE P.C.B. ADDRESS INFORMATION MOTHER P.C.B. Test Point Transistors Q1045 D-1 CL6001 A-6 Q1051 C-2 CL6002 A-6 Q1081 D-2 CL6003 A-6 Q1082 D-2 CL6004 A-6 Q1115 B-3 CL6005 A-6 Q1125 C-3 CL6006 A-6 Q1126 C-3 CL6007 A-6 Q4302 B-5 CL6008 A-6 Q4422 F-2 CL6009 A-6 Q4423 F-2 CL6010 A-6 Q4751 D-4 CL6011 A-6 Q4924 C-5 CL6012 A-5 Q4940 F-4 CL6013 A-5 Q4947 E-4 CL6014 A-5 Q4948 E-4 CL6015 A-5 Q4949 D-5 CL6016 A-5 Q4950 C-5 CL6017 A-5 Q6085 A-5 CL6018 A-5 Transistor-resistor CL6019 A-5 QR1115 B-3 CL6020 A-5 QR4302 C-5 CL6021 A-5 QR4304 C-5 CL6022 A-5 QR4305 D-5 CL6023 A-5 QR4306 B-5 CL6024 A-4 QR4307 C-5 CL6025 B-5 QR4308 C-5 CL6026 B-6 QR4901 D-3 CL6027 B-6 QR4902 D-3 CL6028 B-5 Inntegrated Circuit TL1001 E-1 IC1021 D-2 TL1002 E-1 IC1101 C-3 TL1003 E-1 IC1151 B-4 TL1004 F-2 IC1195 C-3 TL1005 E-2 IC3501 E-4 TL1006 E-1 IC4301 E-4 TL1007 E-1 IC6001 B-5 TL4301 C-5 ADDRESS INFORMATION TL4303 TL4901 TL4902 TP1101 TP1104 TP1105 TP1106 TP1107 TP1108 TP1109 TP1111 TP1112 TP1113 TP1115 TP1116 Connector FP2001 FP3501 FP3502 FP6102 FP6103 FP6154 JK4401 P1001 Transformer T1021 MODULE P.C.B. Transistor CL8027 B-3 C Q8550 E-4 C CL8028 B-3 C Q8551 E-3 C CL8029 B-3 C Q8552 E-2 C CL8030 B-3 C Q8560 E-4 C CL8031 B-3 C Q8561 E-3 C CL8032 B-3 C Q8562 F-2 C CL8033 B-3 C Transistor-resistor CL8034 D-5 C QR8111 C-6 C CL8035 B-3 C QR8431 F-5 C CL8036 B-3 C QR8571 F-3 C CL8040 D-4 C Inntegrated Circuit CL8201 C-3 C IC8001 C-4 F CL8202 C-3 C IC8051 B-5 C CL8206 D-2 C IC8111 C-6 C CL8231 D-3 C IC8251 C-2 C CL8233 D-3 C IC8421 E-5 C CL8234 D-3 C IC8601 B-2 C CL8235 D-3 C IC8611 B-3 C CL8236 D-3 C IC8651 B-4 C CL8241 B-3 C Test Point CL8242 B-2 C CL8002 B-3 C CL8243 B-3 C CL8003 B-3 C CL8244 B-2 C CL8021 A-3 C CL8421 E-4 C CL8022 A-3 C CL8422 E-5 C CL8023 A-3 C CL8423 E-5 C CL8024 B-3 C CL8551 E-3 C CL8025 A-3 C CL8561 E-3 C CL8026 A-3 C CL8571 F-3 C ADDRESS INFORMATION C……COMPONENT SIDE F……FOIL SIDE B-5 D-3 D-3 C-3 B-3 C-3 C-4 B-4 B-4 C-4 B-4 B-4 C-3 B-1 B-1 F-6 C-4 D-4 B-4 B-4 F-5 F-3 F-1 C-2 52 CL8611 CL8612 TL8111 TL8201 TL8211 TL8212 TL8213 TL8214 TL8215 TL8216 TL8217 TL8218 TL8219 TL8220 TL8512 TL8513 TL8522 Connector FP8101 FP8102 FP8201 FP8501 B-3 B-3 D-6 D-2 C-3 C-3 C-3 C-3 C-3 C-3 C-3 C-3 B-3 B-3 E-2 E-3 E-2 C C C C C C C C C C C C C C C C C E-2 B-2 A-2 F-2 F F C C DVD-K29GCS 16.3. MODULE P.C.B. (1/2) (COMPONENT SIDE) MODULE P.C.B. (1/2) F E D C B A (COMPONENT SIDE) 1 DVD-K29GCS MODULE P.C.B. (1/2) (VEP73122N) 2 3 4 5 53 6 7 DVD-K29GCS 16.4. MODULE P.C.B. (2/2) (FOIL SIDE) MODULE P.C.B. (2/2) F E D C B A (FOIL SIDE) 1 DVD-K29GCS MODULE P.C.B. (2/2) (VEP73122N) 2 3 4 5 54 6 7 DVD-K29GCS 16.5. OPERATION P.C.B. & MIC P.C.B. MIC P.C.B. Inntegrated Circuit Connectors IC4671 B-1 P4601 IC4691 B-4 P4602 ADDRESS INFORMATION C-3 C-3 MIC P.C.B. C OPERATION P.C.B. B B A A DVD-K29GCS OPERATION P.C.B. (REP70123A) 1 2 3 4 DVD-K29GCS MIC P.C.B. (REP74103A) 5 1 55 2 3 4 5 DVD-K29GCS 56 DVD-K29GCS 17 EXPLODED VIEWS 17.1. CASING PARTS & MECHANISM SECTION EXPLODED VIEW 57 DVD-K29GCS 17.2. MECHANISM SECTION EXPLODED VIEW 58 DVD-K29GCS 17.3. PACKING & ACCESSORIES SECTION EXPLODED VIEW 59 DVD-K29GCS 18 REPLACEMENT PARTS LIST Notes: *Important safety notice: Components identified by mark characteristics important for safety. have special Furthermore, special parts which have purposes of fireretardant (resistors), high-quality sound (capacitors), lownoise (resistors), etc. are used. When replacing any of components, be sure to use only manufacture’s specified parts shown in the parts list. *Warning: This product uses a laser diode. Refer to caution statements. *Capacity values are in microfarads (µF) unless specified otherwise, P=Pico-farads (pF), F=Farads (F). *Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM), 1M=1,000k (OHM). *The marking (RTL) indicates the retention time is limited for this item. After the discontinuation of this assembly in production, it will no longer be available. *“(IA), (IB)”, marks in Remarks indicate languages of instruction manuals. [(IA): English, (IB): chinese (Traditional).] *All parts are supplied by S.P.C.. Ref. No. Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 VEP73122N VEP76117A VEP76116C REZ1685 RGKC0053C RGQC0022 RGRC0019H-A RHD30101-1 RHD30111-3 RHDC0023 RMAC0019A-1 RMNC0016 RMNC0017 RMNC0019 RKA0130-K VHD0690-1 RFKGDVDK29AS 18 19 20 21 22 23 24 25 XTN4+10FFC RKMC0010-S RGWC0007A-J RHD26046 VEP70123A VEP74103A RMNC0018 REX1155 26 27 28 29 101 REZC0040 REZC0041 RHD30007-1SJ RGLC0021-1 RXQ1327 102 103 105 107 108 110 111 RDG0557 RDG0558 RMB0713-1 RMG0617-H RMQ1112 RMS0788 RMS0798 Part Name & Description MODULE P.C.B. SW P.C.B. MOTHER P.C.B. FFC(7P) TRAY TOP INSULATION SHEET REAR PANEL SCREW SCREW SCREW FRONT ANGLE PCB SUPPORT(A) PCB SUPPORT(B) PCB SUPPORT FOOT RUBBER SCREW FRONT PANEL ASS’Y 1 SCREW TOP PANEL MIC VOLUME KNOB SCREW FRONT P.C.B. MIC P.C.B. KARAOKE HOLDER CONNECTOR CABLE(2P) FFC(5P) FFC(6P) SCREW LIGHTING PIECE SPINDLE MOTOR ASS’Y PINION SHAFT BEVEL GEAR THRUST SPRING CUSHION RUBBER(A) MOTOR COVER GUIDE SHAFT GEAR SHAFT Pcs 1 1 1 1 1 2 1 2 6 2 1 1 1 1 4 8 1 1 1 1 8 1 1 1 1 Remarks (RTL) (RTL) Ref. No. 112 113 114 115 Part No. RMX0233 RMX0247-1 RWJ6702042 RXQ0946 116 117 118 119 121 122 127 128 129 130 131 RAF3113A-1C REZ1686 RHD14112-J RHD17046-1 RMM0261 VHD1224-1 RDG0597 RDG0548 RDG0549 RDV0070 REM0126 132 133 134 135 VEP70114A RMC0387 RME0351 RMEC0350 136 RMK0616 137 138 139 140 141 144 RML0680 RML0628 RML0629 RMM0283 RMM0284 RQLCA0141 145 146 147 148 150 151 152 153 154 155 156 JSMC0048 RMR1685-X RMA1890 RMR1686-K1 RGQ0417-K RME0353-1 RML0631 XQN17+C25FJ XTB26+6GFJ XTN2+6GFJ RMQ1280 A1 EUR7631110R A1-1 A2 A3 A4 A5 UR76EC3103 RJA0019-2X K2KA6BA00004 RPHC0096 RPFC0042 A6 RQTC0065-B A6 RQTC0066-K C1001,0 2 C1003 C1004 C1011,1 2 C1021 C1031 C1041 C1045 C1051 C1061 C1071 C1081 C1082 C1083 REMOTE CONTROL ASS’Y BATTERY COVER AC CORD AV CORD PAD POLYETHYLENE BAG(F.B.) OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS 1 F0CAF104A024 0.1U 2 ECKMNA471MBV ECKMNA102MEV ECA2WHG100 470P 0.01U 450V 10U 1 1 2 F1A3D470A010 F1B3A332A009 F2A1H5600009 ECA1EHG470 ECQB1H821JF ECQB1H121KF ECQB1H683JF4 ECQB1H102JF ECQB1H104JF4 VCEA1HJC470 2000V 47P 1000V 3300P 50V 56U 25V 47U 50V 820P 50V 0.12U 50V 0.068U 50V 1000P 50V 0.1U 50V 47U 1 1 1 1 1 1 1 1 1 1 (RTL) (RTL) 1 1 2 1 1 1 1 1 1 1 1 1 60 Part Name & Pcs Remarks Description THRUST WASHER 1 WASHER 1 MOTOR CABLE 1 TRAVERSE MOTOR 1 ASS’Y OPTICAL PICK-UP 1 FFC 1 SCREW 1 SCREW 1 OPU DRIVE RACK 1 SCREW 4 PULLEY GEAR 1 RELAY GEAR 1 DRIVE GEAR 1 BELT 1 LOADING MOTOR 1 ASS’Y MOTOR P.C.B. 1 (RTL) SUPPORT SPRING 1 LOCK LEVER SPRING 1 CHANGE LEVER 1 SPRING MECHA CHASSIS 1 ASS’Y DRIVE ARM 1 CHANGE LEVER 1 LOCK LEVER 1 DRIVE RACK 1 SUB RACK 1 LASER CAUTION 1 LABEL MAGNET 1 CLAMPER 1 MAGNET HOLDER 1 CLAMP PLATE 1 TRAY 1 TRAY SLIDER SPRING 1 TRAY SLIDER 1 SCREW 1 SCREW 1 SCREW 1 FFC HOLDER PIECE 1 1 1 1 1 1 1 (IA) 1 (IB) DVD-K29GCS Ref. No. C1101 C1102 C1110 C1111 C1112 C1115 C1116 C1117 C1121 C1122 C1125 C1126 C1127 C1141 C1151 C1153 C1154 C1155 C1171 C1195 C1196 C1197 C3505 C3506 C3507 C350811 C351216 C3517 C3518 C3519,2 0 C3825 C4050 C4309,1 0 C431315 C4323,2 4 C4336,3 7 C4414,1 5 C4423 C4427 C4431 C4432 C4591 C4675 C4677 C4678 C4679 C4680,8 1 C4682,8 3 C4691 C4692 C4693 C4694 C4695,9 6 C4703 C4751,5 2 C4781 C6001 C6002 C6003 C6005 C6006 C6040 C6050 Part No. ECQV1H684JL ECQB1H104JF4 ECJ1VB1H102K F2A1A1020054 F2A1A102A206 F1H1C104A111 ECA1CM221 F2A0J102A247 F2A0J1020045 F2A0J222A247 F1H1C104A111 ECJ1VB1H102K F2A0J102A247 EEUFC1E101S EEUFC1E331 ECA1EM331 ECA1CM221 ECJ1VB1E104K F2A1A1010072 ECJ1VB1A105K ECJ1VB1H103K ECJ1VB1A105K ECJ1XB1C104K ECJ1VB1H103K ECEA0JKS220 ECJ1VB1C105K Part Name & Description 50V 0.68U 50V 0.1U 50V 1000P 10V 1000U 10V 1000U 16V 0.1U 16V 220U 6.3V 1000U 6.3V 1000U 6.3V 2200U 16V 0.1U 50V 1000P 6.3V 1000U 25V 100U 25V 330U 25V 330U 16V 220U 25V 0.1U 10V 100U 10V 1U 50V 0.01U 10V 1U 16V 0.1U 50V 0.01U 6.3V 22U 16V 1U F2A0J102A247 6.3V 1000U 5 ECJ1XB1C104K ECEA0JKA470 F2A0J102A247 16V 0.1U 6.3V 47U 6.3V 1000U 1 1 2 F2A0J102A247 F1H1C104A111 ECEA0JKA470 6.3V 1000U 16V 0.1U 6.3V 47U 1 1 2 F1H1C104A111 16V 0.1U 3 F2A1E221A205 25V 220U 2 ECJ1VC1H820G 50V 82P 2 F2A1E470A205 25V 47U 2 ECJ1XC1H102J ECJ1XC1H102J F1H1C104A111 ECJ1XB1C104K F1H1C104A111 ECJ1VB1H102K F1H1H560A799 ECJ1VB1H102K F1H1H560A799 ECEA1HSN010 50V 50V 16V 16V 16V 50V 50V 50V 50V 50V 1 1 1 1 1 1 1 1 1 2 ECEA1CKS220 16V 22U 2 ECQV1H823JZ ECJ1VF1H104Z ECJ1XC1H680J ECJ1VF1H104Z ECEA1CKS220 50V 50V 50V 50V 16V 1 1 1 1 2 ECJ1XB1C104K F2A1E470A205 16V 0.1U 25V 47U 1 2 F2A1E470A205 F2A0J101A245 ECJ2VB1E104K ECJ1VB1H103K F2A1H100A236 ECJ1VB1H103K ECJ1VF1H103Z ECJ1VF1H103Z 25V 47U 6.3V 100U 25V 0.1U 50V 0.01U 50V 10U 50V 0.01U 50V 0.01U 50V 0.01U 1 1 1 1 1 1 1 1 1000P 1000P 0.1U 0.1U 0.1U 1000P 56P 1000P 56P 1U 0.082U 0.1U 68P 0.1U 22U Pcs Remarks Ref. No. C6060 C6081 C6132 C8001 C8002 C8003 C800410 C8011 C801214 C8015,1 6 C8017,1 8 C8019 C802022 C8023 C8024 C8025 C8026 C8027 C8028 C8031 C8051 C8052 C8053 C8054,5 5 C8056 C8057 C8111 C8112 C8113 C8201 C8202 C820305 C8206 C8207,0 8 C8211 C821214 C8215 C8216 C8217,1 8 C822124 C822527 C8228,2 9 C8232 C8233 C8234 C823537 C8238 C8241,4 2 C8251 C8252 C825457 C8301 C8302 C8303 C8304 C8307 C8308 C8311 C8312 C8421 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 61 Part No. ECJ1VF1H103Z ECJ1VB1H103K ECJ1XB1C104K F2G0J101A066 F2G0G331A012 ECJ0EB1H222K F1G1C104A083 Part Name & Description 50V 0.01U 50V 0.01U 16V 0.1U 6.3V 100U 4V 330U 50V 2200P 16V 0.1U ECJ1VB0J105K F1G1C104A083 Pcs Remarks 1 1 1 1 1 1 7 F1G1C104A042 6.3V 1U 16V 0.1U 1 3 F1G1C104A042 ECJ1VB0J105K 6.3V 1U 2 F1G1C104A083 16V 0.1U 2 F1G1C104A042 ECJ1VB0J105K F1G1C104A083 6.3V 1U 16V 0.1U 1 3 F1G1C104A042 ECJ1VB0J105K ECJ0EB1H222K F1G1C104A083 ECJ1VB0J105K F1G1C104A083 ECJ1VB0J105K F1G1C104A083 ECJ1VB0J105K F1G1C104A083 ECJ0EC1H221J ECJ1VB0J105K 6.3V 1U 50V 2200P 16V 0.1U 6.3V 1U 16V 0.1U 6.3V 1U 16V 0.1U 6.3V 1U 16V 0.1U 50V 220P 6.3V 1U 1 1 1 1 1 1 1 1 1 1 2 F1G1C104A083 ECJ0EB1H222K ECJ0EB1A104K ECJ1VB0J105K ECUX1E471KBQ F2G0J101A031 F2G0J101A066 F1G1C104A083 16V 0.1U 50V 2200P 10V 0.1U 6.3V 1U 25V 470P 6.3V 100U 6.3V 100U 16V 0.1U 1 1 1 1 1 1 1 3 ECJ1VB0J105K F1G1C104A083 6.3V 1U 16V 0.1U 1 2 F1G1C104A042 ECJ0EB1A333K F1G1C104A083 10V 0.033U 16V 0.1U 1 3 F1G1C104A042 ECJ0EB1C562K ECJ0EB1C183K ECJ1VB0J105K 16V 5600P 16V 0.018U 6.3V 1U 1 1 2 F1G1C183A004 ECJ0EB1A104K 10V 0.1U 4 F1G1A104A014 F1G1C104A083 16V 0.1U 3 F1G1C104A042 ECJ1VB0J105K 6.3V 1U 2 F1G1C104A083 ECJ0EB1E472K F1G1C104A083 F1G1H1020008 16V 25V 16V 50V 1 1 1 3 F1G1C104A042 ECUE1E821KBQ ECJ0EB1A104K 25V 820P 10V 0.1U 1 2 F1G1E821A056 F1G1A104A014 F2G0J221A065 F2G1C470A076 F1G1C104A083 6.3V 220U 16V 47U 16V 0.1U 1 1 4 F1G1C104A042 F2G0J221A031 F2G0J330A031 F1G1C104A083 ECJ1VB0J105K F1G1C104A083 ECJ0EC1H150J F1G1C104A083 ECJ1VB0J105K F2G0J101A083 6.3V 220U 6.3V 33U 16V 0.1U 6.3V 1U 16V 0.1U 50V 15P 16V 0.1U 6.3V 1U 6.3V 100U 1 1 1 1 1 1 1 1 1 0.1U 4700P 0.1U 1000P F1G1C104A042 F1G1C104A042 F1G1C104A042 F1G1C104A042 F1G1C104A042 F1G1A104A014 ECJ0EB1E471K F1G1C104A042 F1G1C104A042 ECJ0EB1H102K F1G1C104A042 F1G1C104A042 F1G1C104A042 DVD-K29GCS Ref. No. C8422,2 3 C8425 C8426 C8501 C850204 C8505 C8506 C8550 C8551 C8552 C8553 C8554 C8561 C8562 C8563 C8564 C8601 C8611 C8621 C8622 C8651,5 2 Part No. F1G1C104A083 Part Name & Description 16V 0.1U Pcs F2G0J330A083 F1G1C104A083 ECJ3YB1A106K F1G1C104A083 6.3V 33U 16V 0.1U 10V 10U 16V 0.1U 1 1 1 3 ECJ0EC1H221J ECJ0EC1H101J F2G0J330A031 F1G1C104A083 F2G1C100A072 F2G0J470A031 ECJ1VB0J105K F1G1C104A083 F2G1C100A072 F2G0J470A031 ECJ1VB0J105K F1G1C104A083 F1G1C104A083 ECJ0EC1H150J ECJ0EC1H220J F1G1C104A083 50V 220P 50V 100P 6.3V 33U 16V 0.1U 16V 10U 6.3V 47U 6.3V 1U 16V 0.1U 16V 10U 6.3V 47U 6.3V 1U 16V 0.1U 16V 0.1U 50V 15P 50V 22P 16V 0.1U 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 D1011 D1031 D1041 D1045 D1046 D1051 D1071 D1072 D1081 D1082 D1083 D1084 D1111 D1121 D1125 D1141 D1151,5 2 D1153 D1171 D4301 D6081 D6101 D8231 D8550 D8571 B0EDKT000009 AP01C B0HAGM000006 MA4200L MA4240H MA4068M MA4100M MA2C16500E MA2C18500E MA2C16500E MA4100H MA4160-L 21DQ06FC4 21DQ06FC4 MA2J11100L B0JAML000011 B0JAML000011 DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 B0EAKM000122 B0JAME000037 MA4056H MA4091L B3AAA0000721 MA2J11100L MA2J11100L MA2J72800L DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE 1 1 1 1 1 1 1 1 DP6081 A2BA00000217 DISPLAY TUBE 1 F1001 K5D162BLA013 FUSE 1 FP2001 FP2601 FP3501 K1MN07A00005 K1MN07B00082 K1KA14A00135 1 1 1 FP3502 K1KA20A00215 FP6101 FP6102 FP6103 FP6154 K1MN06C00005 K1MN06A00013 K1KA02AA0193 VJS3623A005W FP8101 FP8102 FP8201 K1KB20A00165 K1KB14A00074 RJS2A5106T FP8501 K1MN26A00061 CONNECTOR(7P) CONNECTOR(7P) CONNECTOR(MALE) 14P CONNECTOR(MALE) 20P CONNECTOR(6P) CONNECTOR(6P) CONNECTOR(2P) CONNECTOR(FEMALE) 5P CONNECTOR(20P) CONNECTOR(14P) CONNECTOR(FEMALE) 6P CONNECTOR(26P) IC1021 IC1101 C0DACZH00024 C0DAEMB00003 IC IC 1 1 Remarks F1G1C104A042 F1G1C104A042 F1G1C104A042 F1G1C104A042 Ref. No. IC1151 IC1195 IC3501 IC4301 IC4671 IC4691 IC6001 IC8001 IC8051 IC8111 IC8251 IC8421 IC8601 IC8651 Part No. Part Name & Description Pcs C0DBZHG00047 C0DBFGC00008 C9ZB00000498 C0ABBB000118 C0ABBB000216 C0ABBB000216 MN101C87AAE RFKVDS39BKIT C3ABPG000133 C0CBCBD00018 C0GBG0000054 C0FBBK000047 C0EBE0000384 RFKWSK82C160 IC IC IC IC IC IC IC IC IC IC IC IC IC IC 1 1 1 1 1 1 1 1 1 1 1 1 1 1 IP1171 B1ZAZ0000030 IC PROTECTOR 1 IR6131 B3RAD0000070 REMOTE CONTROL SENSOR 1 J4671,7 K2HB102J0038 2 JACK, MIC2 2 JK4401 K2YZ19000001 JACK, AUDIO VIDEO OUT 1 K810103 K8104 K8105 K8421 K8651 ERJ3GEY0R00 1/10W 0 3 ERJ6GEY0R00V ERJ3GEY0R00 ERJ3GEY0R00 ERJ2GE0R00X 1/8W 0 1/10W 0 1/10W 0 1/16W 0 1 1 1 1 L1001 L1111 L1117 L1131 L1141 L1151 L3501 L3801 L4291 L6001 L8201 L8202 L8301 L8302 L8550 ELF15N003A G0A100HA0023 G0C100JA0048 G0C330KA0065 G0C330KA0065 G0A220GA0026 G0C220JA0019 VLQ0599J680 G0C391JA0064 G0C101JA0019 G1C100K00020 J0JCC0000079 G1C100KA0055 J0JCC0000079 G1C100KA0055 NOISE FILTER COIL 10UH COIL 10UH COIL 33UH COIL 33UH COIL 22UH COIL 22UH COIL 68UH COIL 390UH COIL 100UH COIL 10UH COIL 9UH COIL 10UH COIL 9UH COIL 10UH 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 LB353133 LB3534 LB3535, 36 LB4601 LB4671 LB4673, 74 LB8001, 02 LB8003, 04 LB8005, 06 LB830105 LB8401 LB842124 LB8491 LB8502 LB8503 LB8504, 05 LB8507 J0JBC0000117 COIL 3 J0JCC0000186 J0JBC0000117 COIL COIL 1 2 J0JCC0000120 J0JCC0000120 J0JCC0000120 COIL COIL COIL 1 1 2 J0JHC0000097 COIL 2 ERJ2GE0R00X 1/16W 0 2 ERJ3GEY0R00 1/10W 0 2 J0JCC0000371 COIL 5 ERJ2GEJ151 ERJ2GE0R00X 1/16W 150 1/16W 0 1 4 ERJ2GE0R00X J0JHC0000097 ERJ2GE0R00X J0JCC0000371 1/16W 0 COIL 1/16W 0 COIL 1 1 1 2 J0JCC0000371 COIL 1 Remarks C0ABBB000126 C0ABBB000126 F1G1C104A042 F1G1C104A042 F1G1C104A042 F1G1C104A042 B0HADV000010 MAZ42000LF MAZ42400H MAZ40680M MAZ41000MF MAZ41000H MAZ41600L B0JAMG000013 B0JAMG000013 MAZ40560H MAZ40910L 1 1 1 1 1 K1MN05A00003 1 1 1 K1MN06A00022 1 62 G0C680JA0026 DVD-K29GCS Ref. Part No. No. LB8511- ERJ3GEY0R00 14 LB8691- ERJ2GEJ101 93 Part Name & Description 1/10W 0 Pcs 1/16W 100 3 P1001 P4601 P4602 K2AA2B000009 VJS3611B005W K1KA02AA0193 AC INLET CONNECTOR (5P) CONNECTOR (2P) 1 1 1 PC1 PC2 PC3 PC4 RPGC0363 RPNC0085A RPNC0085B RPFC0026-B PACKING CASE CUSHION(A) CUSHION(B) POLYETHYLENE BAG 1 1 1 1 PJ6101 REZ1682 CABLE 1 Q1045 Q1051 Q1081,8 2 Q1115 Q1125 Q1126 Q4302 Q4422,2 3 Q4751 Q4924 Q4940 Q4947,4 8 Q4949 Q4950 Q6085 Q8550 Q8551 Q8552 Q8560,6 1 Q8562 2SC3311AS B3PBA0000241 2SC3311AS TRANSISTOR TRANSISTOR TRANSISTOR 1 1 2 B1DHDD000029 2SB14170JA XN1501 B1ABCF000138 B1ABCF000138 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 1 1 1 1 2 B1ABCF000138 UN2111 B1ABCF000138 B1ABCF000138 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 1 1 1 2 UNR221100L 2SD0601ARL B1ABGC000011 B1ADHG000003 B1ABDF000018 2SB970-R B1ABDF000018 TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 1 1 1 1 1 1 2 2SB970-R TRANSISTOR 1 QR1115 QR4302 QR4304, 05 QR4306 QR4307 QR4308 QR4901, 02 QR8111 QR8431 QR8571 B1GBCFNN0036 B1GDCFJJ0046 XN0431100L TRANSISTOR TRANSISTOR TRANSISTOR 1 1 2 B1GBCFJA0026 UNR221100L UN2111 XN0431100L TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 1 1 1 2 XP6214 B1GBCFJJ0047 B1GDCFEC0001 TRANSISTOR TRANSISTOR TRANSISTOR 1 1 1 R1001,0 2 R1031 R1041 R1045 R1046 R1051 R1061 R1062 R1071 R1072 R1081 R1082 R1083 R1084 R1085 R1101 R1102,0 3 R1104 R1105 ERDS2FJ474 1/4W 470K 2 ERG2SJ683 ERG1SJ680 ERDS2FJ273 ERDS2FJ100 ER0S2CKF2002 ERDS2FJ223 ERDS2FJ123 ER0S2CHF1501 ER0S2CHF1001 ER0S2CKF2702 ER0S2CHF1002 ER0S2CHF5601 ERDS2FJ223 ERDS2FJ104 ERDS2FJ750 ER0S2CKF1201 2W 68K 1W 68 1/4W 27K 1/4W 10 1/4W 20K 1/4W 22K 1/4W 12K 1/4W 1.5K 1/4W 1K 1/4W 27K 1/4W 1K 1/4W 5.6K 1/4W 22K 1/4W 100K 1/4W 75 1/4W 1.2K 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 ERJ6GEYJ102V ERJ3GEYJ102V 1/8W 1K 1/10W 1K 1 1 Remarks Ref. No. R1106 R1107 R1115 R1116 R1125 R1126 R1127 R1128 R1191 R3531 R353234 R3535,3 6 R3537 R4301 R4302 R4303,0 4 R4307 R4308 R4309 R4310,1 1 R4312,1 3 R4316 R4320 R4329 R4331,3 2 R4355,5 6 R4367,6 8 R4401,0 2 R4403 R4404 R4414,1 5 R4417 R4422,2 3 R4428,2 9 R4451,5 2 R4459,6 0 R4557 R4567 R4673 R4675 R4676 R4677 R4678 R4679 R4680 R4681 R4691 R4693 R4694 R4695 R475153 R4754 R4755 R4756 R4940 R4947,4 8 R4949 R4950 R4951 R6000 4 K1MN05B00011 XN01501 UNR211100L 2SB09700R 2SB09700R UNR211100L XP06214 EROS2CKF2002 EROS2CKF2702 EROS2CKF1201 63 Part No. ERJ3GEYJ122 ERJ3GEYJ103V ERJ3GEYJ104 ERJ3GEYJ102V ERJ3GEYJ271 ERJ3RBD362 ERJ3RBD132 ERJ3GEYJ121 ERJ3GEYJ104 ERJ3EKF75R0 ERJ3GEYF750 Part Name & Description 1/10W 1.2K 1/10W 10K 1/10W 100K 1/10W 1K 1/10W 270 1/16W 3.6K 1/16W 1.3K 1/10W 120 1/10W 100K 1/10W 75 1/10W 75 ERJ3EKF75R0 1/10W 75 2 ERJ3GEYJ103V ERJ3GEYJ332 ERJ3GEYJ103V ERJ3GEYJ222 1/10W 1/10W 1/10W 1/10W 10K 3.3K 10K 2.2K 1 1 1 2 ERJ3GEYJ102V ERJ3GEYJ222 ERJ3GEYJ223 ERJ3GEYJ104 1/10W 1/10W 1/10W 1/10W 1K 2.2K 22K 100K 1 1 1 2 ERJ3GEYJ223 1/10W 22K 2 ERJ3GEYJ472 ERJ3GEYJ222 ERJ3GEYJ222 D0HB912ZA002 1/10W 1/10W 1/10W 1/10W 1 1 1 2 D0HB153ZA002 1/10W 15K 2 ERJ3GEYJ101 1/10W 100 2 ERJ3GEYJ822 1/10W 8.2K 2 ERJ3GEYJ103V ERJ3GEY0R00 ERJ3GEY0R00 1/10W 10K 1/10W 0 1/10W 0 1 1 2 ERJ3GEYJ102V ERJ3GEYJ473V 1/10W 1K 1/10W 47K 1 2 ERJ3GEYJ681 1/10W 680 2 ERJ3GEYJ821 1/10W 820 2 ERJ3GEYJ221 1/10W 220 2 ERJ3GEYJ122 ERJ3GEYJ122 ERJ3GEYJ102V ERJ3GEYJ123V ERJ3GEYJ224 ERJ3GEYJ102V ERJ3GEYJ223 ERJ3GEYJ123V ERJ3GEYJ224 ERJ3GEYJ223 ERJ3GEYJ273 ERJ3GEYD274V ERJ3GEYJ473V ERJ3GEYJ393 ERJ3GEYJ102V 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1.2K 1.2K 1K 12K 220K 1K 22K 12K 220K 22K 27K 270K 47K 39K 1K 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 ERJ3GEYJ221 ERJ3EKF75R0 ERJ3GEYJ103V ERJ3GEYJ471 ERJ3GEYJ821 1/10W 1/10W 1/10W 1/10W 1/10W 220 75 10K 470 820 1 1 1 1 2 ERJ3GEYJ103V ERJ3GEYJ122 ERJ3GEYJ821 ERJ3GEY0R00 1/10W 1/10W 1/10W 1/10W 10K 1.2K 820 0 1 1 1 1 4.7K 2.2K 2.2K 9.1K Pcs 1 1 1 1 1 1 1 1 1 1 3 Remarks D0GB103JA002 D0GB103JA002 D0GB103JA002 D0GB101JA002 D0GB103JA002 D0GB473JA002 ERA3YKD274V D0GB473JA002 D0GB103JA002 D0GB103JA002 DVD-K29GCS Ref. No. R6002,0 3 R6006 R6008 R6009 R6011 R6022 R6023 R6024 R6025 R6026 R6040 R6050 R6060 R6071 R6072 R6081 R6085 R6086 R6101 R6151 R6161 R6171 R8011 R8021,2 2 R8023 R8041 R8201 R8231 R8233 R8235,3 6 R8241 R8242 R8243 R8254 R8255 R8261 R8262 R8263 R8264 R8265 R8311 R8312 R8313 R8314 R8315 R8321 R8322 R8325 R8326 R8331 R8332 R8335 R8341 R8401 R8402 R8404 R8420 R8421 R8431 R8501 R8505 R8506 R8550 R8551 R8552,5 3 R8554 R8555 R8556 R8557 R8558 Part No. ERJ3GEY0R00 Part Name & Description 1/10W 0 Pcs ERJ3GEYJ103V ERJ3GEYJ473V ERJ3GEYJ103V ERJ3GEYJ102V ERJ3GEY0R00 ERJ3GEYJ103V ERJ3GEYJ272 ERJ3GEYJ103V ERJ3GEYJ122 ERJ3GEYJ103V ERJ3GEYJ103V ERJ3GEYJ103V ERJ3GEYJ303 ERJ3GEYJ473V ERQ14AJW271E ERJ3GEYJ822 ERJ3GEYJ104 ERJ3GEYJ471 ERJ3GEYJ122 ERJ3GEYJ122 ERJ3GEYJ122 ERJ2GEJ220 ERJ2GEJ103 1/10W 10K 1/10W 47K 1/10W 10K 1/10W 1K 1/10W 0 1/10W 10K 1/10W 2.7K 1/10W 10K 1/10W 1.2K 1/10W 10K 1/10W 10K 1/10W 10K 1/10W 30K 1/10W 47K 1/4W 270 1/10W 8.2K 1/10W 100K 1/10W 470 1/10W 1.2K 1/10W 1.2K 1/10W 1.2K 1/16W 22 1/16W 10K 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 ERJ2GEJ473 ERJ2RKD330 ERJ2GEJ222 ERJ2GEJ103 ERJ2GEJ153 ERJ2GEJ822 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 47K 33 2.2K 10K 15K 8.2K 1 1 1 1 1 2 ERJ2GEJ223 ERJ2GEJ752X ERJ2GEJ103 ERJ3GEY0R00 ERJ2GE0R00X ERJ2GEJ823 ERJ2GEJ472 ERJ2GEJ823 ERJ2GEJ472 ERJ2GE0R00X ERJ2RHD242 ERJ2RHD102 ERJ2RHD243 ERJ2GE0R00X ERJ2GEJ6R8X ERJ3RBD161 ERJ2RKD100 ERJ3RBD161 ERJ2RKD100 ERJ3RBD161 ERJ2RKD100 ERJ3RED820V ERJ3RED820V ERJ2GEJ473 ERJ2GEJ101 ERJ2GEJ101 ERJ2GEJ331 ERJ2GEJ470 ERJ2GEJ222 ERJ2GE0R00X ERJ2GEJ222 ERJ2GEJ152 ERJ2GEJ752X ERJ2GE0R00X ERJ2GEJ102X 1/16W 1/16W 1/16W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 22K 7.5K 10K 0 0 82K 4.7K 82K 4.7K 0 2.4K 1K 24K 0 6.8 160 10 160 10 160 10 82 82 47K 100 100 330 47 2.2K 0 2.2K 1.5K 7.5K 0 1K 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 ERJ2GEJ680 ERJ2GEJ2R2X ERJ3GEYJ560 ERJ3GEYJ510 ERJ2GEJ473 1/16W 1/16W 1/10W 1/10W 1/16W 68 2.2 56 51 47K 1 1 1 1 1 Remarks Ref. No. R8559 R8560 R8561 R8562,6 3 R8564 R8565 R8566 R8567 R8568 R8569 R8570 R8601 R8611 R8621 R8622 2 D0GB103JA002 D0GB473JA002 D0GB103JA002 D0GB103JA002 D0GB103JA002 D0GB103JA002 D0GB103JA002 D0GB103JA002 D0GB473JA002 Part No. ERJ2GEJ153 ERJ2GEJ102X ERJ2GE0R00X ERJ2GEJ102X Part Name & Description 1/16W 15K 1/16W 1K 1/16W 0 1/16W 1K ERJ2GEJ220 ERJ2GEJ2R2X ERJ3GEYJ560 ERJ3GEYJ510 ERJ2GEJ473 ERJ2GEJ123 ERJ2GEJ104 ERJ2GEJ102X ERJ2GEJ101 ERJ2GEJ105 ERJ2RHD391 1/16W 1/16W 1/10W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W RV2101 EVUE27FK3B53 VARIABLE RESISTOR 1 RX801114 RX8015 RX801618 RX8021 RX8031, 32 RX8111 RX8401 RX8501 RX8502 RX8503, 04 RX8611 D1H88204A024 RESISTOR-RESISTOR 4 D1H422020001 D1H88204A024 RESISTOR-RESISTOR RESISTOR-RESISTOR 1 3 D1H410320002 D1H447220001 RESISTOR-RESISTOR RESISTOR-RESISTOR 1 2 D1H422320002 D1H410120001 D1H456020001 D1H85604A024 D1H456020001 RESISTOR-RESISTOR RESISTOR-RESISTOR RESISTOR-RESISTOR RESISTOR-RESISTOR RESISTOR-RESISTOR 1 1 1 1 2 D1H447220001 RESISTOR-RESISTOR 1 S2601 S2602 S6151 S6152 S6161 S6162 S6171 S6172 K0L1BA000078 K0L1BA000078 EVQ11G07K EVQ11G07K EVQ11G07K EVQ11G07K EVQ11G07K EVQ11G07K SWITCH SWITCH SWITCH, SWITCH, SWITCH, SWITCH, SWITCH, SWITCH, 1 1 1 1 1 1 1 1 T1021 G4D2A0000223 TRANSFORMER 1 VA1002 ERZVA5Z471 DIODE 1 W182-88 ERJ3GEY0R00 1/10W 0 7 X6001 X8621 H2D800400009 H0J270500080 CERAMIC OSCILLATOR CRYSTAL OSCILLATOR 1 1 ZA1001, 02 ZA1112 ZA4701 ZA4751 EYF52BCY FUSE HOLDER 2 K4CZ01000027 RMCC0001-1 K4CZ01000027 TERMINAL EARTH SPRING TERMINAL 1 1 1 22 2.2 56 51 47K 12K 100K 1K 100 1M 390 Pcs 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 ERJ2RMJ752X ERJ2RMJ752X ERJ2RMJ102X ERJ2RMJ680X ERJ2RMJ2R2X 64 OPEN/CLOSE POWER PLAY QUICK OSD PAUSE STOP Remarks ERJ2RMJ102X ERJ2RMJ102X ERJ2RMJ2R2X ERJ2RMJ102X
advertisement