Polaroid Film Camera 117922 User manual

Questions? Need Help?
Contact Polaroid Customer Care Center
Toll Free at: 1-800-343-5000
8am - 6 pm EST Mon - Fri (USA only)
3
2
Lighten/Darken Control
Taking Photos
4
Close-up Lens
(Not on AF model cameras)
1
Loading Film
5
This camera uses
Polaroid 600 series
film. Each pack of film
contains 10 photos.
Flash Override Button
(Not on AF model cameras)
AF Model Cameras:
636 AF
OneStep AF
OneStep AF SE
600 AF
Snap the camera shut
when not in use.
Non-AF Model Cameras:
637
OneStep
OneStep Express
600 Extreme
600 CL
Cool Cam
JobPro 2
600 Business Edition 2
1 Loading Film
2 Taking a Photo
a
4 ft –
1.2m –
2 – 4 ft
.6 – 1.2m
a Pull up the flash unit and
snap it into place.
a
4 ft –
1.2m –
a Position your subject(s) 4-8 feet from the
camera (normal lens setting). Frame
your subject(s) in the viewfinder.
b Open the film door.
b
b Hold the camera still and
press the shutter button.
c Insert the film pack as
shown. Hold the film
pack by the edges. Push
the film pack in until a
"click" is heard.
c
b
c The photo automatically
ejects.
c
d Close the film door.
3 Lighten/Darken
Control
Use this feature to retake a photo that was too
light or too dark. Always return the control to
the normal position after using.
d
e The camera ejects
the paper film cover.
e
To lighten a photo that is too dark, slide the lighten/
darken control to the right. Retake the photo.
10
f
f Check the picture
counter on the back of
the camera. The number
inside the window shows
you how many photos
are left in a film pack.
A new pack of film
contains 10 photos.
To darken a photo that is too light, slide the lighten/
darken control to the left. Retake the photo.
4 Close-up Lens
(Not on AF model cameras)
Developing photos are fragile.
a
4 ft –
1.2m –
a
Developing
Photos
2 – 4 ft
.6 – 1.2m
To take a close-up photo, slide the close-up
lens lever to the right.
Do not shake
Do not bend
b
55 F
13 C
2 – 4 ft
.6 – 1.2m
b
Position your subject 2 - 4 feet from the
camera. Frame your subject in the oval area
of the viewfinder. Press the shutter button.
If the temperature is below 55 F (13 C) place
the developing photo in a warm location,
such as your pocket.
Camera Maintenance
5 Flash Override Button
(Not on AF model cameras)
The flash override button allows
you to take a photo without
the flash. Use this feature
when shooting metallic or
shiny surfaces, or when
shooting a subject through glass.
Flash Override Button
a
Frame your subject. Hold
the camera still and press
the flash override button.
b
The photo automatically
ejects.
a
b
Do not touch the
camera lens.
Clean the camera
lens with a soft,
lint-free cloth.
If spots or banding appears
on photos, the camera may
have dirty developer rollers.
To clean the developer rollers, dampen a clean
cloth with tap water. Open the film door and
thoroughly clean the rollers. If film is in the
camera, clean the rollers in a dimly-lit area.