Tecumseh Lawn Mower MI11CRD (MI1192RBA) User manual

REPAIR PARTS MANUAL
MODEL NO. MI11CRD (MI1192RBA)
Lawn Tractor
HOW TO USE THIS MANUAL
This manual is designed to provide the customer with a means to identify the parts on his/her tractor
when ordering repair parts. The illustrations may or may not represent the actual assemblies; therefore,
it is not recommended to use this manual as a guide to assemble or disassemble the tractor. Some
hardware and parts are drawn larger in order to more readily identify them.
Each tractor has its own model number.
The model number for your tractor can be found on the fender under the seat.
When ordering parts, always give the following information:
• Product - “Tractor”
• Model Number - “MI11CRD (MI1192RBA)”
• Part Number
• Part Description
TABLE OF CONTENTS
SCHEMATIC ................................................................................................................ 3
ELECTRICAL............................................................................................................4-5
CHASSIS...................................................................................................................6-7
DRIVE........................................................................................................................8-9
STEERING ............................................................................................................10-11
SEAT .......................................................................................................................... 12
DECALS..................................................................................................................... 13
ENGINE.................................................................................................................14-15
MOWER LIFT ........................................................................................................16-17
MOWER DECK .....................................................................................................18-19
BAGGER ...............................................................................................................20-21
2
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
SCHEMATIC
12VDC
AMMETER
(OPTIONAL)
RED
STARTER
SOLENOID
BATTERY
STARTER
RED
RED
A
M
FUSE
BLACK
WHITE
S
B
M
G
L
K
AC
BL
BLACK
BLACK
CLUTCH / BRAKE
(PEDAL UP)
FBI
SWITCH
FBI BUZZER
ATT'MENT CLUTCH
(CLUTCH OFF)
GREEN
OPERATOR PRESENCE
RELAY
85
86
87
30
GREEN
SEAT SWITCH
(NOT OCCUPIED)
87A
BLACK
85
86
30
87
BLACK
BAGGER
INTERLOCK
(NO BAG,
CHUTE OR
PLUG)
87A
BAGGER RELAY
85
87
BLACK
FUEL
LINE
M
BLUE
SPARK
PLUGS GAP
(2 PLUGS ON
TWIN CYL. ENGINES)
IGNITION
UNIT
RED
CARBURETOR SOLENOID
(IF SO EQUIPPED)
B
30
87A
MOWER ENGAGED
RELAY
BLACK
S
86
CHARGING SYSTEM OUTPUT
3 AMP DC @ 3600 RPM
28 VOLTS AC MIN. @ 3600 RPM
(CHARGING SYSTEM DISCONNECTED)
RED
L
G
DIODE
LIGHTING SYSTEM
OUTPUT
5 AMP AC @ 3600 RPM
ALTERNATOR
14 VOLTS AC MIN. @ 3600 RPM (LIGHTS OFF)
IGNITION SWITCH
POSITION
CIRCUIT
OFF
ON
START
M+G
B+L
B+S+L
WIRING INSULATED CLIPS
NOTE: IF WIRING INSULATED
CLIPS WERE REMOVED FOR
SERVICING OF UNIT, THEY
SHOULD BE REPLACED TO
PROPERLY SECURE YOUR
WIRING.
87
86
87A
85
30
NON-REMOVABLE
CONNECTIONS
3
REMOVABLE
CONNECTIONS
RELAY
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
ELECTRICAL
24
41
43
40
27
26
27
27
27
42
81
25
16
16
33
30
48
52
66
29
27
28
66
2
1
58
59
16
4
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
ELECTRICAL
KEY PART
NO. NO.
DESCRIPTION
1
2
16
24
25
26
27
28
29
30
33
40
41
42
43
48
52
58
59
66
81
Battery
Bolt Hex Hd 1/4-20 Unc X 3/4
Switch Interlock Push-In
Cable Starter 6Ga 11" Red
Cable Battery Crd 56" Red
Fuse 20 Amp
Nut Keps Hex 1/4-20 Unc
Cable Ground 6 Ga 18" Black
Switch Plunger Normal Op Olive
Switch Ignition
Key Ign
Harness Ign
Bolt Flk Fin Hex 1/4-20 Unc X 1/2
Cover Terminal Red
Solenoid
Adapter Ammeter Rectangular
Protection Wire Loop
Buzzer Crd
Switch FBI CRD
Screw Thdrol 3/8-16 x 1/2 Ty-Tt
Relay Asm
532 16 34-65
874 76 04-12
532 17 61-38
532 12 47-80
532 16 59-87
532 17 51-58
873 51 04-00
532 12 77-25
532 16 07-84
532 17 55-67
532 14 04-01
532 18 00-20
871 11 04-08
532 13 15-63
532 17 88-61
532 14 08-44
532 14 19-40
532 16 94-19
532 18 03-79
817 49 06-08
532 10 97-48
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm.
5
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
CHASSIS AND ENCLOSURES
17
28
256
39
165
189 188 188
187
187
186
18
24
89
26
30
189
190
25
24
166
3
266
171
171
26 25
198
173
172
3
9
11
184
5
69
31
170
5
209
15
208
265
209
209
175
209
8
26
214
3
179
185
6
8
16
35
10
33
1
24
209
3
37
26
162
26
37
3
164
35
3
3
205
163
207
3
13
145
209
24
2
34
205
38
38
6
26
208
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
CHASSIS AND ENCLOSURES
KEY
NO.
1
2
3
5
6
8
9
10
11
12
13
15
PART
NO.
532 17 46-20
532 18 03-84
817 06 06-12
532 15 52-72
532 18 44-19
532 12 64-71
532 18 54-80
872 14 06-08
532 17 49-96
532 14 56-60
532 18 17-19
874 18 05-12
16
17
18
24
25
26
28
30
31
33
34
35
37
38
39
69
89
145
162
873 51 05-00
532 18 58-47
532 12 69-38
874 78 06-16
819 13 13-12
873 80 06-00
532 18 58-60
532 18 13-86
532 16 51-56
532 18 10-57
532 18 10-58
872 11 06-06
817 49 05-08
532 18 17-48
532 17 47-14
532 14 24-32
532 18 13-88
532 15 65-24
532 18 03-82
DESCRIPTION
Chassis
Drawbar
Screw 3/8-16 x .75
Bumper Hood/Dash
Saddle
Clip Insulator 13/32 Mtg. Hole
Dash
Bolt, Carriage 3/8-16 x 3/4
Panel, Dash, L.H.
Clip Tinnerman Grille P/L
Panel, Asm. Dash R.H.
Screw, Machine, Truss Head
5/16-18 UNC x 3/4
Nut
Hood Assembly
Bumper Hood
Bolt
Washer 13/32 x 13/16 x 12 Ga.
Nut
Grille Lens Asm
Fender
Bracket, Fender Support
Footrest, L.H.
Footrest, R.H.
Bolt
Screw Thdrol 5/16-18 x 1/2 TYT
Bracket Asm Pivot Mower Rear
Bracket Pivot Laser/Elite LT
Screw Hex 1/4-1/2
Console
Rod Pivot Chassis/Hood
Bracket Exten Chassis Lh CRD
KEY PART
NO. NO.
DESCRIPTION
163
164
165
166
170
171
172
173
175
179
184
185
186
187
188
189
190
198
205
207
208
209
214
256
265
266
--
Bracket Exten Chassis Rh CRD
Support Battery CRD
Cover Battery CRD Lt
Screw HWHD Hi-Lo #13-16 x 3/4
Backplate CRD
Bolt Rdhd Sqnk 3/8-16 x 2-1/2 G5
Washer 13/32 x 1-1/4 x 16 Ga.
Nut, Keps Hex 3/8-16 UNC
Trap Door CRD
Rod Pivot FBI CRD
Bracket Actuator Bagger CRD
Knob Rod
Latch Asm Multch Bagger
Nut Weld .327/.304 #10-24
Washer #10
Washer Lock #10
Screw Pan Hd Phillips 10-24 x 5/8
Nut Push
Screw 3/8-16 x 1/2
Screw 5/16-18 x 1/2
Screw Thdrol 3/8-16 x 1/2
Screw Hex Wsh Thdrol 3/8-16 x 3/4
Retainer Spring 1"
Cover Fender Rack CRD
Seal RH Side Bagger
Seal LH Side Bagger
Plug, Button
532 18 03-83
532 16 56-05
532 18 13-56
532 17 18-75
532 17 88-62
872 14 06-20
819 13 20-16
873 51 06-00
532 18 03-10
532 18 03-76
532 17 46-62
532 18 11-01
532 16 07-93
532 12 50-04
819 06 12-16
810 07 10-00
871 08 10-10
532 16 89-37
817 49 06-08
817 67 05-08
817 67 06-08
817 00 06-12
532 12 47-88
532 18 13-61
532 18 57-04
532 18 57-03
532 00 54-79
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm.
7
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
DRIVE
180
183
47
263
269
38
51
183
183
57
172
183
267
96
264
171
84
265
266
261
26
51
179
178
253
159
161
254
158
66
179
180
26
184
160
162
181
9
56
250
65
164
14
13
167
171
14
83
177
163
168
166
21
112
80
43
203
183
42
40
10
82
96
187
50
38
165 156
182
50
42
150
11
18
5
39
51
48
5
18
8
4
62
6
3
51
49
35
250
151
27
34
36
47
37
6
258
30
120
79
250
30
16
255
77
28
36
35 36
35
258
2
26 258
36
35
214
29
22
215
255
27
77
74
145
24
78
1
25
76
96
75
8
26
26
19
55
53
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
DRIVE
KEY PART
NO. NO.
1
------2
3
4
5
6
8
9
10
11
13
14
16
18
19
21
22
24
25
26
27
28
29
30
34
35
36
37
38
39
40
42
43
47
48
49
50
51
53
55
56
57
62
65
66
74
75
76
77
78
79
532 14 66-82
532 16 59-99
812 00 00-28
532 12 15-20
817 06 05-12
532 16 56-19
532 18 03-54
876 02 04-16
532 10 57-01
874 55 04-12
810 04 04-00
873 80 05-00
874 78 06-16
873 80 06-00
532 10 69-33
532 17 56-07
873 35 06-00
532 10 68-88
819 13 13-16
876 02 04-12
532 17 57-65
532 07 16-73
532 17 49-73
532 17 55-78
532 12 01-83
819 21 16-16
532 12 49-63
532 16 59-36
874 76 06-44
532 12 49-65
819 13 13-12
819 11 10-12
532 12 77-83
532 15 44-07
532 12 32-05
872 11 06-12
873 68 06-00
532 10 57-10
532 10 57-09
817 06 06-20
532 16 56-31
532 12 48-72
810 04 07-00
532 15 47-78
532 13 70-57
532 12 17-49
812 00 00-01
532 12 35-83
532 12 17-48
532 12 50-96
KEY PART
NO. NO.
80
532 14 50-90
82
532 16 57-11
83
819 17 12-16
84
532 16 56-21
96
532 12 47-88
112 819 09 12-10
120 873 90 06-00
145 874 49 05-40
150 532 16 58-50
151 819 13 32-10
156 532 16 60-02
158 532 16 55-89
159 532 18 39-00
160 819 29 20-16
161 872 14 04-06
162 873 68 04-00
163 874 78 04-16
164 819 09 10-10
165 532 16 56-23
166 532 16 68-80
167 532 16 55-88
168 532 16 54-92
171 817 49 06-08
172 532 16 56-35
177 532 16 59-32
178 532 16 59-33
179 532 12 09-58
180 532 16 56-30
181 532 18 02-11
182 532 18 26-82
183 532 18 60-07
184 817 49 06-44
DESCRIPTION
Transaxle Peerless 206-546
Order parts from transaxle manufacturer
Spring Brake Return
Pulley Transaxle
Ring Retainer #5100-62
Strap torque 30 degrees
Screw 5/16-18 x 3/4
Rod Shift Fender Adjust Lt
Clutch Asm Noram
Pin, Cotter 1/8 x 1
Washer Plate Shf .3888 sq hole
Bolt 1/4-28 Unf Gr 8 w/patch
Washer, Lock Hvy Helical
Nut, Lock Hex w/Ins 5/16-18 unc
Bolt Hex 3/8-16 UNC x 1 Gr.5
Nut, Lock Hex w/Wsh 3/8-16 UNC
Knob Round 1/2-13 Unc Blk
Rod, Brake CRD Main
Nut
Spring, Rod, Brake
Washer 13/32 x 13/16 x 16 Ga.
Pin, Cotter 1/8 x 3/4
Rod, Parking Brake
Cap, Parking Brake
Bracket, Mfg. Transaxle
Shaft, Asm Pedal Foot CRD
Bearing, Nylon
Washer 21/32 x 1 x 16 Ga.
Pin, Roll 3/16 x 1"
Pulley, Flat
Bolt Fin Hex 3/8-16 Unc x 2-3/4
Spacer, Split 395 x 59 Bzp
Washer 13/32 x 13/16 x 12 Ga.
Washer 11/32 x 5/8 x 12 Ga.
Pulley, Idler, V Groove Plasitc
Bellcrank Clutch Grnd Drv
Retainer, Belt Style Spring
Bolt Carr Sh 3/8-16 x 1-1/2 Gr. 5
Nut, Crownlock 3/8-16 UNC
Link, Clutch 7.66
Spring, Return, Clutch
Screw 3/8-16 x 1-1/4
V-Belt Kev PMST CRD
Cover, Pedal
Washer
Keeper, Belt Engine F-Proof
Spacer Axle
Washer 25/32 x 1-1/4 x 16 Ga.
Ring, E
Key, Square
Washer 25/32 x 1-5/8 x 16 Ga.
Key Woodruff
187
203
214
215
250
253
254
255
258
261
263
264
265
266
267
269
817 58 05-20
871 17 07-80
532 17 56-09
532 17 56-51
817 06 06-12
532 17 50-28
817 00 06-16
532 17 56-08
532 17 80-62
532 13 14-94
817 00 06-12
532 18 19-95
532 18 20-13
532 18 20-61
872 14 06-26
532 18 24-02
DESCRIPTION
Arm Shift PMST 20" Tires
Spring, Torsion
Washer 17/32 x 3/4 x 16 Ga.
Link Shift CRD Pmst 18" Tires
Spring, Retainer 1”
Washer 9/32 x 3/4 x 10 Ga.
Nut Lock 3/8-16
Bolt Hex FGHD 5/16-18 x Gr 5
Bushing, Bellcrank Grnd Dr
Washer 13/32 x 2 x 10 Ga.
Washer Srred 5/16 ID x 1.125
Bracket Shift Mount
Hub Tapered Flange Shift Lt
Washer 29/32 x 1-1/4 x 16 Ga
Bolt Rdhd Sqnk 1/4-20 x 3/4 Gr 5
Nut Crownlock 1/4-20 Unc
Bolt Hex Fin 1/4-20 Unc x 1 Gr 5
Washer 5/8 x .281 x 10 Ga.
Bracket Pivot Lever
Screw 5/16-18 x 5/8
Bracket Support Shift CRD
Bolt Shoulder 5/16-18 x .561
Screw Thdrol 3/8-16 x 1/2 Ty-Tt
Shaft Asm Shift Front CRD PMST
Keeper Flat Idler 3.06" CRD
Keeper Belt Idler 1.88" CRD
Washer Sintered
Pulley Flat Composite 3.06"
Bracket Idler Ground Drive CRD
Keeper Belt 2.5" Od V-Idler CRD
Pulley V-Idler 2.50" Od CRD
Screw Hexwsh Thdrol 3/8-16 x 23/4
Screw 5/16-18 x 1.25
Bolt Hex 7/16-20 x 5
Shaft Asm. Brake
Rod Brake Secondary
Screw 3/8-16 x .75
Bracket Cable Chassis
Screw 3/8-16 x 1
Brace Shaft Brake
Clip Retainer
Pulley Idler Flat Plated
Screw Hex Wsh THDR 3/8-16 x 3/4
Bracket Clutch
Spacer Idler Chassis
Shield Idler
Bolt Rd Sqk 3/8-16 x 3-1/4
Guard Muffler OHV B&S RH
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
9
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
STEERING ASSEMBLY
38
12
39
1
41
42
37
37
36
44
51
54
88
91
43
71
67
67
68
46
29
67
8
13
6
65
17
46
2
8
6
87
5
87
3
32
5
11
68
4
29
43
82
40
43
15
33
29
15
34
15
10
10
35
6
8
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
STEERING ASSEMBLY
KEY
NO.
1
2
3
4
5
6
8
10
11
12
13
15
17
29
32
33
34
35
36
37
38
39
40
41
42
43
44
46
51
54
65
67
71
68
82
87
88
91
PART
NO.
532 13 97-68
532 17 23-93
532 16 98-40
532 16 98-39
532 12 49-31
532 12 17-48
812 00 00-29
532 17 51-21
810 04 06-00
873 94 08-00
532 13 65-18
532 14 52-12
532 18 06-41
817 06 06-12
532 17 01-62
819 11 12-16
810 04 05-00
873 54 05-00
532 15 50-99
532 15 29-27
532 14 01-75
819 18 38-12
532 12 47-01
532 10 07-11
532 16 96-33
532 12 17-49
532 18 06-40
532 12 12-32
873 54 04-00
871 13 04-20
532 16 03-67
872 14 06-18
532 17 51-46
532 16 98-27
532 16 98-35
532 17 39-66
532 17 51-18
532 17 55-53
DESCRIPTION
Steering Wheel
Cast Iron Axle Assembly
Spindle Assembly, L.H.
Spindle Assembly, R.H.
Bearing, Race, Thrust, Hardened
Washer 25/32 x 1-5/8 x 16 Gauge
Ring, Klip
Link, Drag
Washer, Lock
Nut Hex Jam Toplock 1/2-20
Spacer Brg Axle Front
Nut, Hexflange Lock
Shaft Assembly, Steering
Screw, 3/8-16 x 3/4
Rod, Tie
Washer 11/32 x 3/4 x 16 Ga
Washer Lock Hvy Hlcl Spr 5/16
Nut Crownlock 5/16-24 Unf
Bushing, Steering
Screw TT #I0-32 x 5 x 3/8 Flange
Cap Wheel Steer
Washer 9/16 x 2-3/8 x 12 Ga
Nut Lock Center 3/8-24 Unf
Adaptor, Steering Wheel
Boot, Steering Dash P/L Mtl
Washer 25/32 x 1-1/4 x 16 Gauge
Extension Steering
Cap, Spindle
Nut Crownlock 1/4-28
Bolt Hex 1/4-28unf x 1-1/4
Spacer Brace Axle
Bolt Rdhd Sq 3/8-16 UNC x 2-1/4
Steering Asm.
Brace Axle
Bracket Susp Chassis Front
Washer Flat .781 x 1-1/2 x .14
Bolt Shoulder 7/16-20 Unc
Clip Steering
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm.
11
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
SEAT ASSEMBLY
1
8
8
9
14
9
7
7
10
5
6
22
21
2
24
16
5
26
25
15
23
13
17
12
4
3
KEY PART
NO. NO.
DESCRIPTION
KEY PART
NO. NO.
1
2
3
4
5
6
7
8
9
10
12
13
Seat
Bracket Pnt Pivot Seat (blk )
Bolt Fin Hex 3/8-16 Unc x 1
Washer Flat 13/32 x 1 x 10 Ga.
Clip Push In Hinged
Nut Lock Hex 3/8-16 Unc
Spring Seat Cprsn 2 250 Blk Zi
Screw 3/8-16 X 1-1/2
Washer 13/32 X 1 X 14 Ga
Pan Pnt Seat (blk )
Bracket Pnt Mounting Switch
Bushing Snap Blk Nyl 50 Id
14
872 05 04-12 Bolt Rdhd Sht Nk 1/4-20x1-1/2
15
532 13 43-00 Spacer Split
16
532 12 12-50 Spring Cprsn Plate SW 1.310 Ga
17
532 12 39-76 Nut Lock 1/4 Lge Flg Gr 5 Zinc
21
532 17 18-52 Bolt Shoulder 5/16-18 Unc-2A
22
873 80 05-00 Nut Hex Lock w/Ins 5/16-18
23
871 11 08-14 Bolt Hex Black
24
819 17 19-12 Washer 17/32 X 1-3/16 X 12 Ga.
25
532 12 70-18 Bolt Shoulder 5/16-18 X 62
26
810 04 08-00 Washer Lock Hvy Hlcl Spr 1/2
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm
532 17 53-89
532 14 05-51
871 11 06-16
819 13 16-10
532 14 50-06
873 80 06-00
532 12 41-81
817 00 06-16
819 13 16-14
532 18 24-93
532 12 12-46
532 12 12-48
12
DESCRIPTION
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
DECALS
20
6
14
21
14
17
20
11
2
13
1
12
DESCRIPTION
1
2
6
10
11
12
13
14
17
Decal Read Owner’s Manual Sym
Decal Hp Engine
Decal Fender 100 OB/CE
Decal Bat Dan/Poi P/L Sym Wpn
Decal Mower Cut Finger Symbol
Decal Brake/Clutch Symbol Lt
Decal Warn Back Plate CRD
Decal Chassis Hot Muffler
Decal Saddle Brake Parking
WHEELS & TIRES
1
2
5,8
4,10
7
3,9
6
_ 150N
MAX +
10
KEY PART
NO. NO.
532 14 54-98
532 18 47-64
532 18 04-32
532 14 50-05
532 18 21-66
532 15 97-37
532 18 04-35
532 15 97-36
532 14 08-37
_ 90N
MAX +
11
KEY PART
NO. NO.
DESCRIPTION
20
21
—
—
—
—
—
—
532 18 56-51
532 16 62-86
532 18 10-90
532 13 83-11
532 18 26-21
532 18 10-91
532 18 52-30
532 18 52-04
Decal Chassis
Decal Hex Belt Sch 92 CRD
Pad Footrest RH
Decal Lift Handle
Decal Bagger Frame
Pad Footrest LH
Manual Operator's (Euro)
Manual Parts
KEY
NO.
1
2
3
4
5
6
7
8
9
10
11
--
PART
NO.
532 05 91-92
532 06 51-39
532 10 62-22
532 05 99-04
532 12 51-21
532 12 49-57
532 12 49-59
532 12 51-22
532 12 46-35
532 12 49-26
532 17 50-39
532 14 43-34
DESCRIPTION
Cap Value Tire
Stem Value
Tire F Ts 15 X 6 0 - 6 Service
Tube Inner Front #35060
Rim Asm 6"front Service
Fitting Grease
Bearing Flange
Rim Asm 8"rear Service
Tire R Ts 20 x 8-8 Service
Tube Rear 9 5 X 8 Service
Cap Axle Blk 1 50 X 1 00
Sealant, Tire (10 oz. tube)
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
13
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
ENGINE
3
2
72
1
81
25
13
26
78
38
32
14
16
44
78
46
33
37
31
33
45
29
23
OPTIONAL EQUIPMENT
Spark Arrester
14
4
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
ENGINE
KEY PART
NO. NO.
1
2
3
DESCRIPTION
532 17 05-51
817 72 04-08
--------
Control Throt
Screw Hex Thd Cut 1/4-20x1/2
Engine B&S Model 21A807
(Order Parts from Engine Manufacturer)
4
532 17 97-58 Muffler Exhaust B&S Lt
13
532 16 52-91 Gasket 1 313 Id Tin Plated
14
532 14 84-56 Tube Drain Oil Easy
16
811 05 06-00 Washer Lock Ext Tooth 3/8
23
532 16 98-37 Shield Browning/Debris Guard
25
532 18 09-45 Control Choke
26
873 92 06-00 Nut Keps 3/8-24 Unf
29
532 13 71-80 Arrestor Spark
31
532 18 55-34 Tank Fuel 2.00 Fr
32
532 14 05-27 Cap Asm Fule Top Vent N/Lany
33
532 12 34-87 Clamp Hose Blk
37
532 13 70-40 Line Fuel 20"
38
532 18 16-54 Plug Drain Oil Easy
44
817 67 04-12 Screw Hexwsh Thdrol 3/8-16 x 3/4
45
817 00 06-12 Screw 3/8-16 x 3/4
46
819 09 14-16 Washer 9/32 X 7/8 X 16ga
72
532 18 39-06 Screw Socket Head 5/16-18 x 1
78
817 06 06-20 Screw 3/8-16x1-1/4
81
873 51 04-00 Nut Keps Hex 1/4-20 UNC
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
15
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
MOWER LIFT
7
8
5
1
3
13
2
4
6
6
11
5
4
12
13
19
20
13
15
31
32
13
19
20
17 18
16
20
15
31
32
16
20
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
MOWER LIFT
KEY
NO.
1
2
3
4
5
6
7
8
11
12
13
15
16
17
18
19
20
31
32
PART
NO.
532 15 94-60
532 15 94-71
532 10 57-67
812 00 00-02
819 21 16-21
532 12 01-83
532 10 94-13
532 12 45-26
532 16 58-29
532 16 58-31
532 12 46-70
532 17 32-88
873 35 08-00
532 17 56-89
873 80 08-00
532 13 98-68
532 16 35-52
532 16 98-65
873 54 06-00
DESCRIPTION
Washer Asm Inner Spring W/Plunger
Shaft Asm. Lift
Pin Groove
E Ring #5133-62
Washer 21/32 x 1 x 21 Ga.
Bearing Nylong
Grip Handle Bicycle
Button Plunger Black
Link Asm Lift L.H.
Link Asm Lift R.H.
Retainer Spring
Link Front
Nut Jam Hex 1/2-13 Unc
Trunnion Blk Zinc
Nut Lock w/Wsh 1/2-13 Unc
Arm Suspension Mower
Retainer Spring
Bearing, Pvt. Lift.
Nut Crownlock 3/8-24
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
17
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
MOWER
67
157
158
156
153
151
155
152
153 154
40
40
37
36
84
56
32
55
68
116
36
117
32
30
119
30
21
36
36
40
37
21
34
17
44
36
24
26
118
46
2
33
2
30
3
30
21
124
61
27
32
28
31
21
30
40
21
23
25
124
21
6
33
5
21
31
1
19
11818
32
4
35
40
37
119
21
117
36
22
116
21
46
124
130
2
13
2
15
46
2
11
14
131
45
69
163
161
162
9
8
16
162
9
20
18
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
MOWER
KEY
NO.
1
2
3
4
5
6
8
9
11
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
31
32
33
34
35
36
37
40
PART
NO.
532 16 55-52
872 14 05-06
532 16 55-69
532 16 55-58
532 12 46-70
532 16 55-57
532 18 17-12
810 03 06-00
532 17 00-37
532 13 76-45
532 12 87-74
532 11 04-85
532 17 00-38
872 14 06-10
872 11 06-06
532 13 28-27
532 18 17-13
873 68 05-00
532 16 52-43
532 16 54-46
532 16 52-42
532 16 52-44
532 16 52-37
532 16 55-68
532 16 55-67
532 17 39-84
532 12 99-63
532 15 35-31
532 17 83-42
532 16 52-39
532 16 52-38
532 14 67-63
819 13 13-16
873 68 06-00
KEY
NO.
44
45
46
55
56
61
67
68
69
84
116
117
118
119
124
130
131
151
152
153
154
155
156
157
158
161
162
163
---
DESCRIPTION
Housing Asm. Mower
Bolt Rdhd Sqnk 5/16-18 Unc x 3/4
Bracket Asm. S-Bar Chass
Bracket Bar Sway Deck
Retainer Spring
Bar Sway
Bolt 3/8-24 x 1.25 Gr8 Patched
Washer Lock Hvy 3/8 Unplated
Blade 3-1 Lh
Shaft Asm. W/Lower Bearing
Housing Mandrel Vented (Machd)
Bearing Ball Mandrel
Blade 3-1 Rh
Bolt Carriage 3/8-16 x 1-1/4
Bolt Rdhd Sqnk 3/8-16 x 3/4
Bolt Shoulder 5/16-18 Thd Form
Bolt 3/8-24 x 1.25 Gr8 Ptch Lhthd
Nut Crown Lock 5/16-18
Bracket Idler Sprt RR
Bracket Idler Sprt RF
Bracket Suspension LF
Bracket Suspension RF
Brace Support Susp Frt CRD
Bracket Asm. Susp RR
Bracket Asm. Susp LR
Screw Thd Rolling Washer Head
Washer Spacer Mower Vented
Mandrel Pulleys 36 & 46
Nut Flg Top Lock
Bracket Gauge Wheel Lf
Bracket Gauge Wheel Rf
Pulley Idler V-Groove Dim 4.25
Washer 11/32 x 13/16 x 16 Ga
Nut Crownlock 3/8-16 Unc
PART
NO.
532 17 55-38
532 17 55-39
532 13 77-29
532 16 54-45
532 16 57-23
532 16 59-45
532 10 69-32
532 18 02-17
532 16 54-82
532 15 60-85
532 18 42-19
532 13 39-57
873 93 06-00
819 12 14-14
872 11 06-12
872 11 05-06
532 16 56-61
532 16 96-70
532 17 60-74
532 16 96-74
532 16 96-75
532 16 96-71
532 16 96-72
532 16 96-69
817 72 04-08
532 18 04-18
532 18 60-13
532 18 04-19
532 18 18-57
532 18 18-58
DESCRIPTION
Cover Mandrel Lh
Cover Mandrel Rh
Screw Thd Roll 1/4-20 x 5/8
Arm Idler
Spacer Retainer PM Mower
Spring Tension Belt
Knob Rd 3/8-16 Plstc Thds Blk
Hex-Belt 92 Mower
Shaft Asm W/Lwr Brg Rh Thd CRD
Keeper Belt Idler
Bolt Shoulder
Wheel Gage Donut Wide
Nut Centerlock 3/8-16 Unc
Washer 3/8 x 7/8 x 14 Ga.
Bolt Carr Sh 3/8-16 x 1-1/2 Gr5
Bolt Rdhdsqnk 5/16-18 Unc x 3/4
Chute Bagger CRD
Bracket Clutch Cable
Cable Clutch CRD Service
Washer Flat 3/8" Type B
Spring Retainer
Spring Retainer Lvr Cltch Cab
Spacer Clutch Cable
Rod Clutch Cable 3/8"
Screw Hex Thdcut 1/4-20 x 5/8
Blade Cross Lh 92
Adpater Blade Cross
Blade Cross Rh 92
Mandrel Asm Service
Mandrel Asm CRD Lh Threads
SVC
-532 18 17-65 Replacement Mower Complete
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
19
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
BAGGER
39
17
13
16
11
12
28
16
5
38
17
41
4
5
19
8
20
18
1
37
42
18
9
19
36
41
38
14
32
24
31
2
22
2
7
6
43
16
37
18
14
42
18
13
10
36
7
3
6 4
9
11
7
22
3
25
23
7
16
3
3
2
3
26
21
20
REPAIR PARTS
TRACTOR- -MODEL NO. MI11CRD (MI1192RBA), PRODUCT NO. 964 77 75-00
BAGGER
KEY PART
NO. NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
17
18
19
20
21
22
23
24
25
26
28
31
32
36
37
38
39
41
42
43
Tube Handle Bagger CRD
Bolt Carriage 1/4-20 X 2.0 Gr.5
Nut Lock 1/4 Lge Flg Gr. 5 Zinc
Handle Bagger w/Lvrs Gr. 5 Zinc
Screw Pan Head #10-24 X 1.50 Blk
Screw Pan Hd
Nut Wiz Lock Hex Serr/Hd #10-24
Cover Bagger Steel
Bolt Carriage 1/4-20 x 2.25d x Gr.5
Tube Support Bagger CRD
Bracket Support Upper Bag CRD
Bracket Horiz. Adj Bagger
Bolt Rdhd Sht Sqnk 3/8-16 X 3/4
Bolt Hex 3/8-16 X 2-1/4 Gr. 5
Nut Lock Flg 3/8-16 Unc
Bolt Rdhd Sht Sqnk 5/16-18Unc X 3/4
Washer 11/32 x 3/4 x 16 Ga.
Nut Lock Hex Flange 5/16-18
Bracket Horiz Adj Bagger
Bag Asm CRD
Bracket Side Bagger CRD
Tube Upper Bagger CRD
Tube Pivot Bagger CRD
Tube Front Bagger CRD
Tube Lower Bagger CRD
Grip Handle Black
Retainer Clip
Rivet Rd Hd Drilled 3/8 Dia
Washer 13/32 x 1-1/4 x 16 Ga.
Plug Support Bagger CRD
Bolt 5/16-18 x 2-1/2
Seal Trim 37"
Bracket Vert Adj Bagger CRD
Nut Lock Hx w/Ins 5/16-18 Unc
Plug Tubing End
532 16 52-49
872 14 04-16
532 12 39-76
532 16 99-16
874 98 10-24
874 98 10-32
873 40 10-00
532 18 13-87
872 14 04-18
532 18 12-82
532 16 57-19
532 16 96-85
872 11 06-06
874 52 06-36
873 90 06-00
872 14 05-06
819 11 12-16
873 90 05-00
532 16 96-84
532 18 08-80
532 16 57-81
532 16 57-82
532 16 57-83
532 18 01-24
532 16 57-85
532 16 57-87
532 16 94-84
532 12 68-75
819 13 20-16
532 17 54-01
872 01 05-20
532 18 09-85
532 16 96-83
873 80 05-00
532 17 40-83
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
21
SERVICE
®
TECUMSEH
Issued January 1980
Revised January 1991
POLICY
WARRANTY
®
TECUMSEH
LIMITED WARRANTIES
FOR
NEW PEERLESS GEAR POWER TRAIN COMPONENTS
A. Products Warranted
Peerless Gear and Machine Division of Tecumseh Products Company (“Tecumseh”), subject to the limitations contained below,
will,at its option, repair or replace, without charge for parts or labor only, any part of a new Power Train Component (which as used
herein means and includes the transaxle, gear box, transmission, differential and right angle drives, and any part of the Power Train
Component), EXCEPT any new Power Train Component incorporated in equipment used for commercial or rental purposes, which is
found upon examination by any Tecumseh Authorized Service Outlet or by Tecumseh’s factory in Grafton, Wisconsin, to be DEFECTIVE
IN MATERIAL AND/OR WORKMANSHIP if received by Tecumseh or a Tecumseh Authorized Service Outlet for such examination within
TWO YEARS from the date of sale to the original consumer purchaser of Peerless Series 820, 900, 910, 915, 920, 930 transaxles and
Series 1100 angle drive and ONE YEAR for all other Peerless products. New Power Train Components incorporated in equipment used
for commercial purposes are warranted in the same manner and to the same extent EXCEPT such Power Train Components are warranted for NINETY (90) DAYS ONLY, and must be received by Tecumseh or by a Tecumseh Authorized Service Outlet for such examination within 90 days from the date of sale to the original purchaser. New Power Train Components Incorporated in equipment used for
rental purposes are warranted in the same manner and to the same extent EXCEPT such Power Train Components are warranted for
THIRTY (30) DAYS ONLY, and must be received by Tecumseh or a Tecumseh Authorized Service Outlet within 30 days from the date
of sale to the original purchaser.
B. Products And Items Not Warranted
1.
2.
Alterations or Modifications of Power Train Components.
Accidents, Normal Maintenance, Failure to follow the Original Equipment Manufacturer’s Manual.
This warranty covers only parts of new Power Train Components which are found upon examination to be defective in material or
workmanship as delivered to the original purchaser. This warranty does not cover defects caused by depreciation or damage caused
by normal wear, accidents, improper maintenance, improper use or abuse of the product, failure to follow the instructions contained in
an Instruction Manual for the operation of the Power Train Component and parts. The cost of normal maintenance and replacement of
service items which are not defective shall be paid for by the original purchaser.
C. Securing Warranty Service
Warranty service can be arranged for by contacting either a Tecumseh Authorized Service Outlet (any Tecumseh Registered Service
Dealer, Tecumseh Authorized Service Distributor, or Tecumseh Central Warehouse Distributor) or by contacting Tecumseh, c/o Service
Manager, Engine and Transmission Group Service Division, 900 North Street, Grafton, Wisconsin 53024. Warranty service can only
be performed by a Tecumseh Authorized Service Outlet or by Tecumseh at its factory in Grafton, Wisconsin. At the time of requesting
warranty service, evidence must be presented of the date of sale to the original purchaser. The purchaser shall pay any charges for
making service calls and/or for transporting the product to and from the place where the inspection and/or warranty work is performed.
The purchaser shall be responsible for any damage or loss incurred in connection with the transportation of Power Train Components
and/or part(s) of the Power Train Components submitted for inspection and/or warranty work.
D. Limitation of Damages and Implied Warranties
The foregoing EXPRESSED WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. Neither Tecumseh nor any of its
affiliates makes any warranties, representations or promises, written or oral, as to the quality of the Power Train Component or any of
its parts, other than as set forth herein.
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT THAT
EITHER MAY APPLY TO ANY PART(S) OF POWER TRAIN COMPONENTS, SHALL BE LIMITED IN DURATION TO THE PERIODS
OF THE EXPRESSED WARRANTIES DEFINED IN PARAGRAPH A HEREOF. IN NO EVENT WILL TECUMSEH BE LIABLE FOR ANY
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES AND/OR EXPENSES. Some states do not allow limitations on how long
an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitation(s) or exclusion(s)
may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to
state.
E. No Dealer Warranty
Tecumseh neither assumes nor authorizes any other person, natural or corporate, to assume for Tecumseh any other obligations or
liabilities in connection with or with respect to any part(s) of a Power Train Component. The seller or dealer of part(s) of a Power Train
Component has no authority, whatsoever, to make any representations or promises on behalf of Tecumseh or to modify the terms or
limitations of Tecumseh’s warranty in any way.
22
SERVICE NOTES
23
532 18 52-04 12.18.02 RD
PRINTED IN U.S.A.