Promethean Graphics Tablet 60 User manual

User Guide
Copyright Information
©2010 Promethean Limited. All rights reserved.
This guide is distributed for the ActivSlate 60. It may only be reproduced for use within the institution in which the
product is used. For use outside of your institution, no part of this guide may be reproduced, transmitted, stored in a
retrieval system or translated into any other language without the prior permission of Promethean Limited. Please note
that the content in this guide is protected under copyright law. Although every care has been taken in the compilation
of this guide, Promethean Limited accepts no responsibility for errors or omissions.
2
ActivSlate 60 User Guide
Contents
Welcome
4
Features
5
Registration
6
Compliance
7
Technical Support
8
ActivSlate 60 User Guide
3
Welcome
Thank you for purchasing an ActivSlate 60 from
Promethean. We recommend using ActivSlate 60 with
our latest software, ActivInspire Professional Edition,
which can be downloaded from
www.PrometheanPlanet.com/ActivInspire
The power supply unit may be supplied with more than
one interchangeable plug/adapter and mains leads. This
is to accommodate countries with more than one type of
mains outlet socket.
Acquire thousands of great lessons, resources and
teaching ideas from our free online community,
Promethean Planet. While you’re there, enroll in one of
our ActivLearning courses.
www.PrometheanPlanet.com/ActivLearning
Only use the interchangeable plug or adapter plus mains
lead which is compatible with your mains outlet socket.
Do not attempt to modify the mains lead. If you are
unsure of the electrical compatibility of your equipment,
please contact Promethean or an authorised Promethean
service agent before attempting to connect the power
supply unit to the mains supply.
Part of the Activclassroom, ActivSlate 60, along with
ActivInspire, was designed to be an innovative and
integrated whole group learning environment which
encourages active student participation in lessons.
safet y information
For more information on the ActivClassroom by
Promethean and other products available please visit
www.PrometheanWorld.com
The power supply unit does not contain any user
serviceable parts and must not be opened. If you suspect
that the power supply unit is faulty, you should contact
an authorised Promethean service agent to obtain a
replacement.
bat tery and charging
information
Inspect the power supply unit for physical damage to the
casing before use. If damage is apparent, take care to avoid
contact with any potentially live parts.
The ActivSlate 60 is powered by a rechargeable battery.
It must be charged before it is used for the first time.
The ActivSlate 60 series battery is charged by a
USB A – micro USB cable supplied in the box. An
up-to-date version of Promethean’s ActivDriver must
be installed on the computer to charge by USB. The
ActivDriver is available for download from
www.PrometheanPlanet/support/
Disconnect the power supply unit from the mains
supply at the wall socket and contact Promethean or an
authorised Promethean service agent for advice.
Except for the rechargeable battery, the ActivSlate 60
does not contain any user serviceable parts. You should
not attempt, under any circumstances, to gain access to
internal parts of the unit.
Alternatively, a universal input power supply unit,
branded Promethean and type FW7650L/05 can be
purchased separately. This is the only approved power
supply unit. Do not connect any other power supply unit
to the ActivSlate 60.
If the ActivSlate 60 is suspected to be faulty or damaged
contact Promethean or an authorised Promethean
service agent for advice.
The rechargeable battery will eventually wear out.
available from Promethean.
Operating Temperature Range: +2°C to +45°C
Storage Temperature Range: -10°C to +60°C
Humidity (non condensing) 20% to 90%
Caution: risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to
the instructions
The ActivSlate 60 contains a Lithium-ion battery. Do
not incinerate. Return to an authorised Promethean
service agent for safe disposal.
Replace only with approved ActivSlate 60 batteries
The power supply unit has been fitted with an
interchangeable mains plug which is clipped into the main
body. Where an interchangeable plug is not available
for your country, an adapter is supplied with a suitable
mains lead.
4
ActivSlate 60 User Guide
environmental
consider ations
Features
about the activsl ate 60
Registration button—After starting
registration from ActivInspire, click
here with the ActivPen.
PIN code buttons—
Click three buttons
with the ActivPen to
enter the code from
ActivInspire.
Drawing area—
Click and drag
with the ActivPen
to control your
ActivBoard from
anywhere in the
ActivClassroom.
Power button (at rear of ActivSlate 60)—Press,
hold and release. When the ActivSlate 60 is not in
use it powers off after three minutes.
Charging socket—Connect the
USB cable here for around three
hours to charge the battery when
“Recharge Battery” is displayed.
Ensure that the battery is charged
for at least 1 hour before first use.
LCD screen—Shows wireless
signal strength, battery charge,
registration. Touch-menu lets
you change settings.
about the activhub
(not supplied, avail able for purchase separ ately)
Function indicator light flashes red
when powered from the computer
and flashes green when in use.
Connect ActivHub
to a USB socket on
your computer. Use
the USB extension
cable if necessary.
Antenna should be raised
and in clear view of all
ActivClassroom components.
Using the stand will ensure a
stable position for the ActivHub.
ActivSlate 60 User Guide
5
Registration
step 1
step 4
In the ActivInspire Voting Browser,
A PIN code and instructions are displayed in the
select Device Registration.
next window.
step 2
step 5
In Device Registration,
Click once on the Registration button on the
select ActivSlates and click Register.
ActivSlate 60 and enter the PIN code from
ActivInspire by clicking the PIN code buttons on
the ActivSlate 60.
Registration button
PIN code buttons
step 3
step 6
To register one ActivSlate 60,
In ActivInspire, click Finish.
select the number 1 and click Next.
The ActivSlate 60 LCD screen should
display ‘REGISTERED’.
6
ActivSlate 60 User Guide
Compliance
united states of america
canada
Changes or modifications to this equipment not
expressly approved by Promethean may void the
user’s authority to operate this equipment.
Changes or modifications to this equipment not
expressly approved by Promethean may void the
user’s authority to operate this equipment. This
Class B digital apparatus complies with Canadian
ICES-003.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference
received, including interference that may cause
undesired operation.
For non-intentional radio parts, this equipment
has been tested and found to comply with the
limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
This device complies with RSS-210 of Industry
Canada and is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference
received, including interference that may cause
undesired operation.
united kingdom
Declaration of Conformity
Promethean hereby declare that the device is in
compliance with the essential requirements of the
RTTE directive 1999/5/EC. Please contact
Promethean for a copy of the Declaration of
Conformity if required.
Radio Interface
The radio interface on this product is intended
for use with other Promethean radio devices for
operation in the following countries:
Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovak
Republic, Slovenia, Spain, Sweden, Switzerland,
United Kingdom.
Waste Electrical and Electronic Equipment (WEEE)
For more information concerning the correct
disposal of this product, please contact your
Promethean reseller.
ActivSlate 60 User Guide
7
www.PrometheanWorld.com
©2010 Promethean Ltd. All Rights Reserved. Product Specifications are subject to change without notice.
www.prometheanplanet.com/forum
ActivSlate 60 User Guide TP 1793 V2
Technical Support
knowledgebase
www.prometheankb.com
user group forum