Sony KLV-24P413D P41D LED TV Operating instructions

4-581-143-32(1)
Checking the
accessories
Detaching the Table-Top Stand
from the TV
~
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
Table-Top Stand (1)*
Fixing screws for Table-Top Stand (M4 × 14) (3)
Remote control (1)
AC power cord (mains lead) (1)
Television
AC adapter (1)
Size AAA batteries (2)
Thick and soft cloth
2: Mounting the TV on
the wall
3: Connections
Precautions
• Detach the Table-Top Stand from the TV. For details, refer
to (Detaching the Table-Top Stand from the TV).
• AV composite cable
• Antenna (aerial) cable
• Component cable
• HDMI cable
B
A
Antenna (aerial) cable (not supplied)
SD
HD
22"/24"/29" TV: 6.5 mm ~ 11 mm
Connecting an antenna (aerial)/
cable and VCR
Operating Instructions (this manual) and other
documents
Operating Instructions
* Refer to the supplied Table-Top Stand leaflet to assemble
the Table-Top Stand.
Dimension
A (mm)
B (mm)
22
100
100
24
100
100
29
100
100
Screw (M4)
Wall-Mount Bracket
TV’s rear cover
1: Attaching the TableTop Stand
• Be sure to store the unused screws and Table-Top Stand
in a safe place until you are ready to attach the Table-Top
Stand. Keep the screws away from small children.
• If using an electric screwdriver, set the tightening torque at
approximately 1.2 N·m (12 kgf·cm).
Attach the Wall-Mount Bracket (not supplied)
using the screws (not supplied)
Standard definition (SD) videos have
picture signals with a vertical resolution of
480 (NTSC) or 576 (PAL/SECAM) lines.
High definition (HD) videos have picture
signals with a vertical resolution of 720 or
1,080 lines.
Use authorized
MHL cable with
MHL logo (not
supplied)
If Cable, Connectivity, and other External Devices are defective or not done correctly, it may cause TV
showing symptoms below;
TV Auto OFF/ON @ TV No Audio @ TV No Picture
Make sure the cables at A, B, and C are in good condition and not defective
Cables Connectivity
PC Cable
(not supplied)
Make sure the cables and connectors at A, B, and C are inserted and connected correctly
Set Top Box (STB)
Wall-Mount Bracket
(not supplied)
Make sure the STB is working fine and no issue from the Service Provider
PC *
B
AV cable
(not
supplied)
C
* KLV-29P423D /
KLV-24P423D only
Antenna (aerial) cable
(not supplied)
Soft cloth
AV cable
(not supplied)
• If using an electric screwdriver, set the torque at
approximately 1.5 N·m {15 kgf·cm}.
Antenna
(aerial)
cable (not
supplied)
VCR
MHL device
The MHL (Mobile High-Definition Link) enables the TV
to communicate with a connected MHL-compatible
device. The TV can charge the connected MHLcompatible device while playing photo/music/video
from it. You can use the TV remote control to control the
connected MHL-compatible device.
Cables Condition
Screw (not supplied)
Thick and
soft cloth
x Connecting MHL device (KLV-29P423D /
KLV-24P423D only)
Picture Quality
Wall mount location
• Follow the instruction guide provided with the Wall-Mount
Bracket for your model. Sufficient expertise is required in
installing this TV, especially to determine the strength of
the wall for withstanding the TV’s weight.
• The length of the screw for Wall-Mount Bracket differs
depending on the Wall-Mount Bracket thickness. Please
see below illustration.
Connecting audio/video devices/
Set top box
Connecting an antenna (aerial)/
cable
~
• If “Auto Input Change (MHL)” is set to “On”, the TV
automatically switches to HDMI2/MHL (KLV-29P423D /
KLV-24P423D only) when MHL-compatible device is
connected to HDMI2 / MHL (KLV-29P423D / KLV-24P423D
only) jack. The availability of “Auto Input Change (MHL)”
depends on whether the MHL-compatible device can
support this feature.
• You can continue normal usage of the connected MHLcompatible device (such as receiving calls) depending on
its capability.
• Some remote control functions may not be available
depending on features of the connected MHL-compatible
device. Please refer to the device manual for details.
• This product is officially MHL-certified for operation
with other MHL-certified devices. If you encounter any
problems when using the MHL function, please consult the
device manufacturer for support.
A
Customer support
@
http://www.sony.co.in/
(TEL: 1800-103-7799)
DVD recorder/Set top box
© 2017 Sony Corporation Printed in India
KLV-29P423D / KLV-24P413D / KLV-24P423D / KLV-22P413D
4: Preventing the TV
from toppling over
3
To select TV position:
“Settings”
“Set-up”
Anchor bolts (M4) (not supplied)
Overview of the
TV controls and
indicators
Overview of the remote control
Front View
Selects input source.
Switches to a TV display when
displaying external input.
~
• To exit “Set-up” menu:
Turns the TV on or switch to standby
mode.
Dual Sound.
In TV mode: Selects channels.
Power/Standby indicator
• Lights off when in standby.
• Lights up in green when
the TV is turned on.
• Flashes while the remote is
being operated.
~
• Do not put anything over the sensor, doing so may affect
its function.
Back View
Sets the desired time frame to turn
off TV automatically.
Selects, adjusts or confirmed
selected items.
Returns to the previous screen.
In USB mode: Stops the playback.
Displays a list of shortcuts to some
setting menus.
Displays or cancels the menu.
Returns to the previous channel or
input watched (for more than 15
seconds).
In TV mode: Selects the next or
previous channel.
Volume
CH/INPUT
Follow the instructions on the screen.
Displays information about the
programme/input.
Operates USB compatible
equipment that is connected to
the TV.
• Press button until
“Rr Programme +/-”
appears and selects
channels with Volume
button.
• Press button until “Rr
Input select” appears
and selects input
source with Volume
button.
• Adjusts volume.
• Moves through
options up or down
when selecting
channels or input
source.
x To change the Wide Mode
For TV, Video, Component or HDMI (except PC input)/ MHL
Wide Zoom*
Normal
Full
Zoom*
* Parts of the top and bottom of the picture may be cut off.
~
• Some options may not be available depending on the signal source.
•
Turn on the connected equipment, then press
connected equipment list.
x To watch a channel or external input
Using Menu
Functions
Favourites
TV
For PC or HDMI PC Input (PC timing)
Normal
Full 1
Full 2
9
on the remote control or CH/INPUT on the TV to display the
Rear View
Add
Select
Labels for TV Model No. and Power Supply rating are located on the
rear of the TV.
Labels for the AC adapter Model No. and Serial No. are located on the
bottom of the AC adapter.
1
B *2
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European
Union and other European countries with
separate collection systems)
2
Applications
3
Media
4
Settings
FM Radio
Photo
Music
Video
~
• To exit Favourites List:
EXIT
D
F *2
G*2
Exit
Photo Frame Mode
C *2
D
Delete
Confirm
Favourites
E
• When you run the “Auto Tuning”, only the programme
channels in your Favourites list will be cleared.
A *1 *2
Mutes or restores sound.
Power
Turns the TV on or
switch to standby
mode.
•
•
Disposal of the TV set
Available when operation guide
appears on the screen.
Adjusts volume.
~
• You can also tune channels manually.
• Language options vary depending on model.
• Select “Home” from “Location” for the best TV settings to
use the TV in the home.
RMT-TX112P unless otherwise stated.
• Before operating the TV, please read Safety Information. Retain this
Viewing pictures from the connected
equipment
Location of the identification label
Selects the desired wide mode.
2
TV model.
• The illustrations of the remote control used in this manual are of the
•
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
“BRAVIA” and
are trademarks of Sony Corporation.
MHL, Mobile High-Definition Link and the MHL Logo are trademarks or
registered trademarks of MHL Licensing, LLC.
Blu-ray Disc is a trademark.
Selects the language.
Strong cord
(not supplied)
~
• When the TV is in standby mode (the "/1 (standby)
indicator on the TV front panel is off ), press "/1 on the
remote to turn on the TV.
• Make sure that the TV is completely turned off before
unplugging the AC power cord (mains lead) or DC
cable. Unplugging the AC power cord (mains lead) or
DC cable while the TV is turned on may cause the TV to
malfunction.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and
~
• The illustrations used in this manual may differ depending on your
“TV Position”
1
Trademark information
Thank you for choosing this Sony product. Before operating the TV,
please read this manual thoroughly and retain it for future reference.
manual for future reference.
“AV Set-up”
5: Performing the
initial setup
Introduction
Disposal of the TV set
2
Disposal of Old Electrical & Electronic
Equipment (Applicable in Republic of
India)
This symbol and its variations indicate that this product and its
components, consumables, parts or spares thereof shall not be treated
as household waste and may not be dropped in garbage bins. Product
owners are advised to deposit their product at the nearest collection
point for the recycling of electrical and electronic equipment. Your
co-operation shall facilitate proper disposal and help prevent potential
negative consequences/hazards to the environment and human health,
which could otherwise be caused by inappropriate waste disposal
including improper handling, accidental breakage, damage and/ or
improper recycling of e-waste. The recycling of materials will help
to conserve natural resources. For more detailed information about
recycling of this product, please contact your local civic office, your
household waste disposal service provider or the store where you made
the purchase. You may contact our company’s toll free number in India
for assistance.
Toll Free: 1800-103-7799
*1 Terminals and labels may vary depending on TV model.
HDMI IN supports only KLV-22P413D.
HDMI IN 1 and HDMI IN 2 support only KLV-24P413D.
HDMI IN 1 and HDMI IN 2 / MHL support only KLV-29P423D / KLV-24P423D.
2
* Terminals and labels may vary depending on TV model.
Visit: www.sony.co.in for product recycling
Reduction in the Use of Hazardous Substances in Electrical &
Electronic Equipment (Applicable in Republic of India)
This product and its components, consumables, parts or spares
comply with the hazardous substances restriction of India’s E-Waste
(Management) Rules. The maximum allowable concentrations
of the restricted substances are 0.1% by weight in homogenous
materials for Lead, Mercury, Hexavalent Chromium, Polybrominated
Biphenyls (PBB) and Polybrominated Diphenyl Ethers (PBDE), and
0.01% by weight in homogenous materials for Cadmium, except for
the exemptions specified in Schedule II of the aforesaid Rules.
Photo Frame Mode
(KLV-29P423D / KLV-24P423D only)
• To exit Home menu:
Display Photo, Music and Clock calendar at the same
time.
• To navigate menu:
ATTENTION:
This product is qualified for the BEE Star rating in the ‘Home’ Mode.
The Objectives of Star Labeling Program is designed to promote
energy efficient products and practices.
When the television is initially set up, it is designed to meet the BEE
Star Labeling requirements while maintaining optimum picture quality.
• Changes to certain functionalities of this television (TV Guide,
Picture/sound etc) may change the power consumption.
• Depending upon such changed setting (eg., Retail mode), the
power consumption may vary which possibly could exceed the
stated energy consumption.
To reset the television to Star rating qualified settings, select ‘Home’
mode from the initial set-up procedure in ‘factory settings’ under the
‘Set-up’ menu.
* Attention statement is subject matter of BEE, and
applicable if functions is available
** “Home mode” conditions are as per BEE guideline only
Applications
x To enter Photo Frame Mode
A HDMI IN, HDMI IN 1, HDMI IN 2 / MHL and HDMI IN 2 (Home Theatre systems, Camcorder, Blu-ray Disc
player, DVD player, PC with HDMI output and Mobile device).
Connect to the HDMI IN jack if the equipment has an HDMI jack.
If the equipment is compatible with MHL, connect the MHL jack of the equipment to HDMI 2 / MHL jack
(KLV-29P423D / KLV-24P423D only) through a MHL - HDMI cable (not supplied).
~
• The HDMI jacks can support PC timing in HDMI PC mode. Refer to (PC input signal reference chart for HDMI IN 1, 2) next
to “PC settings”.
• Be sure to use only an authorized HDMI cable bearing the HDMI logo, or an authorized MHL cable bearing the MHL logo.
B
(Digital still camera, Camcorder, USB storage media)
Access photo/music/video files stored on a USB device.
C AUDIO OUT / (Stereo systems, Headphone)
Connect with an audio cable or headphones. You can listen to TV sound through your stereo system or headphones.
You can select “Variable” or “Fixed” in the “Audio Out” menu.
D
AC IN 110 V – 240 V AC, 50/60 Hz
Connect AC adapter to the (
• To enter:
“Applications”
1
Favourites
“Photo Frame Mode”
Store up to 18 channels or external inputs.
x To add a current channel or external inputs
into Favourites list
2
1
“Favourites”
~
• To exit Photo Frame mode:
x To select Photo/
Music
/
x To select Display
Mode
In Photo Frame Mode
In Photo Frame Mode
“Image
Selection”/ “Music
Selection”
“Display Mode”
OR
“Add to Favourites”
red
) jack.
~
• Be sure to fix adapter plug in hook.
E VIDEO IN
/COMPONENT IN/AUDIO
(DVD player, VCR, Video game equipment, S VHS/Hi8/DVC
camcorder, DVD player with component output)
jack and the AUDIO
jacks. If you connect mono equipment, connect to the L
Connect to the VIDEO IN
(MONO) jack.
For better picture quality, component connection is recommended if your DVD player has a component video
output. Connect to the COMPONENT IN jacks.
PC IN*
F
* KLV-29P423D and KLV-24P423D only.
PC / HDMI AUDIO IN*
G
PC / HDMI AUDIO IN. It is recommended to use an audio input (stereo minijack).
Connect to the
* KLV-29P423D and KLV-24P423D only.
~
• You are also able to select Photo/Music/Display Mode
t “Settings” t “Set-up” t ”Photo Frame
from
Settings”.
AVI
MPEG1
MPEG2
XviD
MPEG4
H.264
MJPEG
PCM
AC3
MPEG1 Layer1/2
MPEG2 AAC
MPEG4 AAC
MPEG4 HE-AAC
WMA V8
MP3
.avi
When playing video
~
• To exit “Photo Frame Mode”/“Slideshow”/”Picture Frame”:
“Auto Tuning”
• To access FM Radio mode:
Audio Codec
.wmv
.asf
ASF
“Picture” / “Sound”
x To reduce power consumption in FM Radio
“Applications”
2
1
.mp4
.mov
.3gp
x To play a photo as slideshow (Photo)
“FM Radio”
x To listen to preset stations:
In FM Radio mode
In FM Radio mode
“Power Saving”
“Eco”
.mkv
MKV
“Power Saving”
“Settings”
OR
“FM Radio Presets”
“Channel Set-up”
~
• To exit from “Picture Off”: Any key except
green
“FM Radio Presets”
3
Music/
Video
Playback photo/music/video files via USB devices.
Side View
x To listen to non-preset stations:
In FM Radio mode
To tune FM frequency
To search desired station
“Media”
/
PCM
MP3
MPEG1 Layer1/2
MPEG2 AAC
MPEG4 AAC
MPEG4 HE-AAC
AC3
WMA V8
MPEG1
MPEG1 Layer1/2
MP3
AC3
MPEG2PS
MPEG1
MPEG2
MPEG1 Layer1/2
MP3
AC3
MPEG2TS
MPEG2
H.264
VC-1
MPEG1 Layer1/2
MP3
MPEG2 AAC
MPEG4 HE-AAC
AC3
MPEG4 AAC
MPEG1
.mpg
.mpeg
.vob
.vro
“Slideshow”
Media
Photo/
WMVV9
MPEG4
H.264
VC-1
/
• If the station has a noisy sound, press B/b to improve the
sound quality.
~
• To exit “Channel Set-up” menu:
• To select desired preset FM Radio stations:
/
MPEG4
H.264
H.263
MJPEG
MPEG1 Layer1/2
MP3
MPEG2 AAC
MPEG4 AAC
MPEG HE-AAC
OR
~
• To exit FM Radio mode:
“FM Radio Set-up”
MP3
WMA V8
“Settings”
OR
2
1
MP4
WMVV9
Xvid
MPEG4
VC-1
“Photo”/“Music”/“Video”
~
• If “Please set-up FM Radio.” appears, perform
To listen to preset stations.
~
• To stop slideshow:
.ts
.m2ts
“Stop Slideshow”
~
• While the TV is accessing the data on the USB device, do
not turn off the TV or connected USB device, disconnect
the USB cable, or remove the USB device.
• Sony will not be held liable for any damage to, or loss of,
data on the recording media due to a malfunction of any
connected devices or the TV.
• The file name and folder name may not display correctly
in some cases.
• When you connect a Sony digital still camera, set the
camera’s USB connection mode to Auto or Mass Storage.
For more information about USB connection mode, refer to
the instructions supplied with your digital camera.
• Check the website below for updated information about
compatible USB devices.
http://www.sony-asia.com/bravia/flash.html
• Use a USB storage device that is compliant with USB
mass storage device class standards.
You are able to change the settings of your TV from
“Settings” menu
Picture Mode Sets a picture mode.
Reset
Resets all the “Picture” settings to
factory settings, except “Picture Mode”
and “Intelligent Picture Plus Set-up”.
Backlight
Adjusts the brightness of the backlight.
Picture
Increases or decreases picture
contrast.
~
• If the stereo sound is noisy when receiving a NICAM
programme, select “Mono”. The sound becomes
monaural, but the noise is reduced.
• If you select other equipment connected to the TV, set
“Dual Sound” to “Stereo”, “Main” or “Sub”. However,
when the external equipment connected to the HDMI jack
is selected, this is fixed to “Stereo”.
Brightens or darkens the picture.
Speakers
x To select setting options
Settings
Picture
Sound
Screen
Channel Set-up
Parental Lock
Set-up
Eco
Brightness
To modify the setting
To select “Settings” category
/
Colour
Increases or decreases colour
intensity.
Hue
Increases or decreases the green
tones and red tones.
Sharpness
Sharpens or softens the picture.
Colour
Adjusts the whiteness of the picture.
Temperature
~
• To exit the setting mode:
• The options you can adjust vary depending on the
situation. Unavailable options are greyed out or not
displayed.
Noise
Reduction
Reduces the picture noise (snowy
picture) in a weak broadcast signal.
MPEG Noise
Reduction
Reduces the picture noise in MPEGcompressed video.
Audio Codec
.mp3
MPEG1 Audio Layer 3
.wma
WMA V8
.wav
LPCM
Extension
Image Codec
JPEG
Others
Operating temperature
0 °C - 40 °C
Operating humidity
10 % - 80 % RH (non-condensing)
Power and others
Power requirements
19.5 V DC with AC adapter
Rating: Input 110 V - 240 V AC, 50/60 Hz
Screen size (measured diagonally) (Approx.)
KLV-29P423D: 72.4 cm / 29 inches
KLV-24P423D: 59.9 cm / 24 inches
KLV-24P413D: 59.9 cm / 24 inches
KLV-22P413D: 54.6 cm / 22 inches
Display resolution
KLV-29P423D: 1,366 dots (horizontal) x 768 lines
(vertical)
KLV-24P423D: 1,366 dots (horizontal) x 768 lines
(vertical)
KLV-24P413D: 1,366 dots (horizontal) x 768 lines
(vertical)
KLV-22P413D: 1,920 dots (horizontal) x 1,080 lines
(vertical)
Troubleshooting
Dimensions (Approx.) (w × h × d)
with Table–Top Stand
KLV-29P423D: 667 x 427 x 147 mm
KLV-24P423D: 558 x 367 x 147 mm
KLV-24P413D: 558 x 367 x 147 mm
KLV-22P413D: 509 x 340 x 147 mm
Picture
No picture and no sound
• Check the antenna/cable connection.
• Connect the TV to the AC power outlet (mains socket),
and press "/1 on the TV. If TV is in standby mode (the
"/1 (standby) indicator on the TV front panel is off), press
"/1.
No picture from the connected equipment
• Turn the connected equipment on.
• Check the connection between the optional equipment
and the TV.
repeatedly to select the desired input.
• Press
• Correctly insert the USB / MHL device.
• For USB device: Make sure that the USB device has
been properly formatted.
• For MHL device: Ensure that the MHL device is
connected to the HDMI IN 2 / MHL jack (KLV-29P423D /
KLV-24P423D only) using an MHL cable.
• Operations are not guaranteed for all USB / MHL devices.
Also, operations differ depending on the features of the
USB / MHL device.
Double images or ghosting
• Check the antenna/cable connection, location or
direction.
• Check if the antenna is broken or bent.
• Check if the antenna has reached the end of its
serviceable life (three to five years in normal use, one to
two years at the seaside).
Distorted picture (dotted lines or stripes)
• Keep the TV away from electrical noise sources such as
cars, motorcycles, hair-dryers or optional equipment.
• When installing optional equipment, leave some space
between the optional equipment and the TV.
• Check the antenna/cable connection.
• Keep the antenna/cable away from other connecting
cables.
Picture or sound noise when viewing a TV channel
without Table–Top Stand
KLV-29P423D: 667 x 402 x 69 mm
KLV-24P423D: 558 x 341 x 65 mm
KLV-24P413D: 558 x 341 x 65 mm
KLV-22P413D: 509 x 314 x 65 mm
Mass (Approx.)
with Table–Top Stand
KLV-29P423D: 5.2 kg
KLV-24P423D: 3.9 kg
KLV-24P413D: 3.9 kg
KLV-22P413D: 3.5 kg
without Table–Top Stand
KLV-29P423D: 5.0 kg
KLV-24P423D: 3.8 kg
KLV-24P413D: 3.8 kg
KLV-22P413D: 3.4 kg
~
• Design and specifications are subject to change without
notice.
Installed with stand
Safety information
• Adjust “AFT” (Automatic Fine Tuning) under the “Manual
Programme Preset” menu to obtain better picture
reception.
Tiny black points and/or bright points appear on
the screen
• The screen is composed of pixels. This is not a
malfunction.
• The channel is for scrambled/subscription service only.
Subscribe to a pay TV service.
• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.
General
The TV turns off automatically (the TV enters standby
mode)
• Check if the “Idle TV Standby” is activated.
• Check if the “Sleep Timer” under the “Clock/Timers” menu
is activated.
Some input sources cannot be selected
• Press
and select “Settings” t “Set-up” t “AV
Set-up” t “Video Labels” and cancel “Skip” of the input
source.
The remote control does not function
10 cm
Batteries must not be exposed to excessive heat such as sunshine, fire
or the like.
Never place a television set in an unstable location. A television set may
fall, causing serious personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple precautions such as:
− Using cabinets or stands recommended by the manufacturer of the
television set.
− Only using furniture that can safely support the television set.
− Ensuring the television set is not overhanging the edge of the
supporting furniture.
− Not placing the television set on tall furniture (for example, cupboards
or bookcases) without anchoring both the furniture and the television
set to a suitable support.
− Not placing the television set on cloth or other materials that may be
located between the television set and supporting furniture.
− Educating children about the dangers of climbing on furniture to reach
the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.
6 cm
Leave at least this space around the set.
• To ensure proper ventilation and prevent the collection of dirt or dust:
− Do not lay the TV set flat, install upside down, backwards, or
sideways.
− Do not place the TV set on a shelf, rug, bed or in a closet.
− Do not cover the TV set with a cloth, such as curtains, or items such
as newspapers, etc.
− Do not install the TV set as shown below.
Air circulation is blocked.
To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture.
To prevent fire or shock hazard, do not place objects filled with liquids,
such as vases, on the apparatus.
Do not install this equipment in a confined space, such as a bookshelf
or similar unit.
• Please ensure that the AC power outlet (mains socket) is installed near
the equipment and shall be easily accessible.
• Be sure to use the supplied AC adapter and AC power cord (mains
lead). Otherwise it may cause a malfunction.
• Connect the AC adapter to an easily accessible AC power outlet
(mains socket).
• Do not coil the AC power cord (mains lead)
around the AC adapter. The core wire may
be cut and/or it may cause a malfunction
on the TV.
• Do not touch the AC adapter with wet hands.
• If you notice an abnormality in the AC adapter, disconnect it from the
Wall
Wall
AC power outlet (mains socket) immediately.
• The set is not disconnected from the AC source as long as it is
• Replace the batteries.
HDMI equipment does not appear on “HDMI Device
List”
• Check that your equipment is compatible with the CEC
Control function.
The “Parental Lock” password has been forgotten
Installation/Set-up
•
Install and use the TV set in accordance with the instructions below in
order to avoid any risk of fire, electric shock or damage and/or injuries.
Installation
• The TV set should be installed near an easily accessible AC power
outlet (mains socket).
• Press
and select “Settings” t ”Parental Lock”
t ”PIN code” then enter 9999 for the PIN code (PIN code
9999 is always accepted.).
• Place the TV set on a stable, level surface to prevent it from falling
TV does not output picture and/or sound from the
MHL device
•
• Disconnect the MHL cable, then reconnect it, or power the
MHL device off then on again and release its lock.
It took long time to open USB drive folders/files
• Depending on the quantity/size of folders/files, it may take
longer time to open.
over and causing personal injury or property damage.
• Use of screws other than those supplied may result in internal damage
to the TV set or cause it to fall, etc.
For product protection and safety reasons, Sony strongly recommends
that installation of your TV on the wall be performed by qualified
professionals. Do not attempt to install it yourself.
Transporting
• Before transporting the TV set, disconnect all cables.
• When transporting the TV set by hand, hold it as
•
•
•
shown in the illustration. Do not put stress on the LCD
panel and the frame around the screen.
When lifting or moving the TV set, hold it firmly from
the bottom.
When transporting the TV set, do not subject it to
jolts or excessive vibration.
When transporting the TV set for repairs or when moving, pack it using
the original carton and packing material.
connected to the AC power outlet (mains socket), even if the set itself
has been turned off.
As the AC adapter will become warm when it is used for a long time,
you may feel hot when touching it by hand.
AC power cord (mains lead)
Prohibited Usage
Handle the AC power cord (mains lead) and outlet (mains socket) as
follows in order to avoid any risk of fire, electric shock or damage and/
or injuries:
− The shape of AC power plug (mains plug), which is supplied with
the TV set, varies depending on the region. Be sure to connect the
appropriate supplied AC power cord (mains lead) with the plug that
fits into the AC power outlet (mains socket).
− Use only Sony supplied AC power cords (mains lead), not those of
other brands.
− Insert the plug fully into the AC power outlet (mains socket).
− Operate the TV set on a 110 V - 240 V AC supply only.
− When wiring cables, be sure to unplug the AC power cord (mains
lead) for your safety and take care not to catch your feet on the
cables.
− Disconnect the AC power cord (mains lead) from the AC power outlet
(mains socket) before working on or moving the TV set.
− Keep the AC power cord (mains lead) away from heat sources.
− Unplug the AC power plug (mains plug) and clean it regularly. If the
plug is covered with dust and it picks up moisture, its insulation may
deteriorate, which could result in a fire.
Do not install/use the TV set in locations, environments or situations such
as those listed below, or the TV set may malfunction and cause a fire,
electric shock, damage and/or injuries.
Location:
• Outdoors (in direct sunlight), at the seashore, on a ship or other
vessel, inside a vehicle, in medical institutions, unstable locations,
near water, rain, moisture or smoke.
• If the TV is placed in the changing room of a public
bath or hot spring, the TV may be damaged by
airborne sulfur, etc.
• For best picture quality, do not expose the screen to
•
•
Notes
direct illumination or sunlight.
Avoid moving the TV from a cold area to a warm area. Sudden room
temperature changes may cause moisture condensation. This may
cause the TV to show poor picture and/or poor colour. Should this
occur, allow moisture to evaporate completely before powering the TV
on.
Never spray water or detergent directly on the TV
set. It may drip to the bottom of the screen or exterior
parts and enter the TV set, and may cause damage
to the TV set.
• Do not use the supplied AC power cord (mains lead) on any other
Ventilation
equipment.
• Never insert anything in the cabinet.
• Leave space around the TV set as shown below.
• Make sure that your TV has adequate ventilation. Allow enough space
around the TV as shown in the illustration.
Installed on the wall
30 cm
10 cm
10 cm
• Do not pinch, bend, or twist the AC power cord (mains lead)
•
•
•
•
•
excessively. The core conductors may be exposed or broken.
Do not modify the AC power cord (mains lead).
Do not put anything heavy on the AC power cord (mains lead).
Do not pull on the AC power cord (mains lead) itself when
disconnecting the AC power cord (mains lead).
Do not connect too many appliances to the same AC power outlet
(mains socket).
Do not use a poor fitting AC power outlet (mains socket).
Environment:
• Do not install the TV in places that are hot, humid, or excessively
•
•
No colour on programmes
• Select “Reset”.
Sound
10 cm
Warning
WARNING
Picture contours are distorted
• Change the current setting of “Cinema Drive” to other
settings.
NOTE ON AC ADAPTER
30 cm
10 cm
Leave at least this space around the set.
dusty; where insects may enter; where it might be exposed to
mechanical vibration, near flammable objects (candles, etc.). The TV
set shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the TV.
Do not place the TV in a humid or dusty space, or
in a room with oily smoke or steam (near cooking
tables or humidifiers). Fire, electric shock, or
warping may result.
Do not install the TV in places subject to extreme
temperature such as in direct sunlight, near a radiator or a heating
vent. The TV may overheat in such condition which can cause
deformation of the enclosure and/or TV malfunction.
glass may break by the impact and cause serious injury.
• If the surface of the TV set cracks, do not touch it until you have
unplugged the AC power cord (mains lead). Otherwise this may cause
an electric shock.
When not in use
• If you will not be using the TV set for several days, the TV set should
•
•
be disconnected from the AC power (mains) for environmental and
safety reasons.
As the TV set is not disconnected from the AC power (mains) when the
TV set is just turned off, pull the plug from the AC power outlet (mains
socket) to disconnect the TV set completely.
Some TV sets may have features that require the TV set to be left in
standby to work correctly.
For children
• Do not allow children to climb on the TV set.
• Keep small accessories out of the reach of children, so that they are
not mistakenly swallowed.
If the following problems occur...
Below information shows the correct handling of the Wall-Mount Bracket.
Be sure to read this information thoroughly and use the Wall-Mount
Bracket correctly.
To Customers:
Be sure to observe the following precautions for safety to prevent a
serious injury through fire, electric shock, the product toppling over, or
the product dropping.
• Be sure to subcontract the installation to licensed contractors and
keep small children away during installation.
• Be sure to subcontract moving or dismounting of the TV to licensed
contractors.
• Do not remove screws, etc., after mounting the TV.
• Do not make alterations to the parts of the Wall-Mount Bracket.
• Do not mount any equipment other than the specified product.
• Do not apply any load other than the TV on the Wall-Mount Bracket.
• Do not lean on or hang from the TV.
• Do not handle the TV with excessive force during cleaning or
maintenance.
60
VESA
* KLV-29P423D and KLV-24P423D only
WXGA
1280
768
47.8
60
VESA
WXGA
1360
768
47.7
60
VESA
USB Auto
Start
SXGA*
1280
1024
64
60
VESA
HDTV*
1920
1080
67.5
60
EIA
* KLV-22P413D only
~
• This TV’s PC input does not support Sync on Green/
Composite Sync and interlaced signal.
• This TV’s PC input supports signals in the above chart with
a 60 Hz vertical frequency.
Automatically enters the thumbnail view
of the last played Photo/Music/Video
when the TV is turned on and a USB
device is connected to the USB port
then turned on.
Clock/Timers Sets the timer to turn on/off the TV
using “On Timer”, and “Clock Set”.
Auto Start-up Starts the initial set-up procedure.
Language
Selects the language in which the
menus are displayed.
Start-up
Logo
1 Digit Direct When “1 Digit Direct” is set to “On”,
select a channel using one preset
number button (0 - 9) on the remote.
Select “On” to display logo when the
TV is turned on. Select “Off” to disable
it.
AV Set-up
Selects settings for connected
equipment or input source.
Programme
Labels
Assigns a channel name of your choice
up to seven letters or numbers.
Allows the TV to communicate with
equipment that is compatible with the
CEC Control function, and connected
to the HDMI jacks of the TV. Note that
communication settings must also be
made on the connected equipment.
Manual
Programme
Preset
Sets programme channels manually.
Product
Information
Displays your TV’s product information.
Factory
Settings
Resets all settings to factory settings.
After completing this process, the initial
set-up screen is displayed.
Enhances picture quality according to
preferred settings, channel or video
input.
Resets all the “Sound” settings to
factory settings, except “Sound Mode”,
“Dual Sound”, “Speakers” and “Audio
Out”.
Adjust the treble level
Bass
Adjust the bass level
Sound
Booster
Produces a fuller sound for more
impact, by emphasising the bass
sounds.
Simulated
Stereo
Adds a surround-like effect to mono
programmes.
Intelligent
Volume
Minimizes the difference in volume
level between all programmes and
adverts.
Balance
Emphasises left or right speaker
balance.
Auto Display Selects “On” to automatically adjusts
Area
the display area based upon the
content or “Off” to choose from the
“Display Area” options.
Display Area Adjusts the picture display area.
Horizontal
Shift
Adjusts the horizontal position of the
picture when “Wide Mode” is set to
“Wide Zoom” or “Zoom”.
Vertical Shift Adjusts the vertical position of the
picture when “Wide Mode” is set to
“Wide Zoom” or “Zoom”.
PC Settings
Selects screen mode or adjusts the
display position of the picture when the
TV receives an input signal from the
connected HDMI PC or PC*.
Channel Set-up
~
• In “Audio Filter”, you cannot receive stereo or dual sound
when “High” is selected.
FM Radio
Set-up
Preset up to 30 FM radio stations that
can be received in your area.
Parental Lock
PIN Code
Sets up TV to block channel or external
input. Use 0-9 on the remote to enter a
four-digit PIN code.
Change PIN
Code
Selects to change your PIN code.
Programme
Block
Blocks an individual channel from
being watched. To view a blocked
channel, select “Unblocked”.
* KLV-29P423D and KLV-24P423D only.
External Input Locks an external input from being
Lock
watched. To view a blocked external
input, select “Unblocked”.
Precautions
Viewing the TV
• View the TV in moderate light, as viewing the TV in poor light or during
long period of time, strains your eyes.
• When using headphones, adjust the volume so as to avoid excessive
levels, as hearing damage may result.
LCD Screen
• Although the LCD screen is made with high-precision technology and
•
•
•
•
•
99.99% or more of the pixels are effective, black dots may appear or
bright points of light (red, blue, or green) may appear constantly on
the LCD screen. This is a structural property of the LCD screen and is
not a malfunction.
Do not push or scratch the front filter, or place objects on top of this TV
set. The image may be uneven or the LCD screen may be damaged.
If this TV set is used in a cold place, a smear may occur in the picture
or the picture may become dark. This does not indicate a failure.
These phenomena disappear as the temperature rises.
Ghosting may occur when still pictures are displayed continuously. It
may disappear after a few moments.
The screen and cabinet get warm when this TV set is in use. This is
not a malfunction.
The LCD screen contains a small amount of liquid crystal. Follow your
local ordinances and regulations for disposal.
Handling and cleaning the screen surface/
cabinet of the TV set
Keep optional components or any equipment emitting electromagnetic
radiation away from the TV set. Otherwise picture distortion and/or noisy
sound may occur.
Caution about handling the remote control
• Observe the correct polarity when inserting batteries.
• Do not use different types of batteries together or mix old and new
batteries.
• Dispose of batteries in an environmentally friendly way. Certain regions
may regulate the disposal of batteries. Please consult your local
authority.
• Handle the remote control with care. Do not drop or step on it, or spill
liquid of any kind onto it.
• Do not place the remote control in a location near a heat source, a
place subject to direct sunlight, or a damp room.
WALL-MOUNT BRACKET
• If you use the TV installed on the Wall-Mount Bracket for a long time,
the wall behind or above the TV may become discoloured or the
wallpaper may come unstuck, depending on the material of the wall.
No sound, but good picture
• Press 2 +/– or % (Mute).
• Check if the “Speakers” is set to “TV Speakers”.
• Do not use the Wall-Mount Bracket in a place where it is subjected to
• Check if the TV system setting under the “Manual
Programme Preset” menu is appropriate.
60
47.4
HDMI Setup
• If the Wall-Mount Bracket is removed after installing it on the wall, the
No sound or noisy sound
48.4
768
Changes the order in which the
channels are stored on the TV.
Optional Equipment
About LCD TV Temperature
768
1280
Tunes in all the available channels.
WALL-MOUNT BRACKET
at it.
− Any liquid or solid object falls through openings in the cabinet.
1024
Programme
Sorting
When the LCD TV is used for an extended period, the panel surrounds
become warm. You may feel hot when touching there by the hand.
When:
− AC power cord (mains lead) is damaged.
− Poor fitting of AC power outlet (mains socket).
− TV set is damaged by being dropped, hit or having something thrown
XGA
WXGA
Auto Tuning
Selects the default screen mode for
use with 4:3 broadcasts.
Be sure to unplug the AC power cord (mains lead) connected to the TV
set from AC power outlet (mains socket) before cleaning.
• To remove dust from the screen surface/cabinet, wipe gently with a
soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened
with a diluted mild detergent solution.
• Never spray water or detergent directly on the TV
set. It may drip to the bottom of the screen or exterior
parts and enter the TV set, and may cause damage
to the TV set.
• Never use any type of abrasive pad, alkaline/
acid cleaner, scouring powder, or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using such materials or maintaining
prolonged contact with rubber or vinyl materials may result in damage
to the screen surface and cabinet material.
• When adjusting the angle of the TV set, move it slowly so as to prevent
the TV set from moving or slipping off from its table stand.
Turn off the TV set and unplug the AC power cord (mains lead)
immediately if any of the following problems occur.
Ask your dealer or Sony service centre to have it checked by qualified
service personnel.
Set-up
Photo Frame Sets desired displays, image or music
Settings*
selection during “Photo Frame Mode”.
VESA
Guidelines
4:3 Default
Set “Picture” settings in more detail.
The following instructions are for Sony dealers and contractors only. Be
sure to read safety precautions described below and pay special
attention to safety during the installation, maintenance and checking of
this product.
• Do not install the Wall-Mount Bracket on wall
surfaces where the corners or the sides of the TV
are protruding away from the wall surface.
• Do not install the TV over or under an
air-conditioner.
• Be sure to install the Wall-Mount Bracket
securely to the wall. If any of the screws are loose
or fall out, the Wall-Mount Bracket may fall and cause
injury or property damage.
• Be sure to use the supplied screws and attachment
parts properly following the instructions given in this
instruction manual. If you use substitute items, the
TV may fall and cause bodily injury to someone or
damage to the TV.
• Be sure to tighten the screws securely in the
designated position.
• Be careful not to subject the TV to shock during installation.
• Be sure to install the TV on a wall that is both perpendicular and flat.
• After proper installation of the TV, secure the cables properly.
• Do not allow the AC power cord (mains lead)
or the connecting cable to be pinched as the
internal conductors may become exposed and
cause a short circuit or an electrical break.
• Do not throw anything at the TV set. The screen
60
Advanced
Settings
To Sony Dealers and Contractors:
Broken pieces:
37.9
~
• When the input source is set to “Skip” in the “Video
Labels” under the “AV Set-up” menu, that input is
greyed out in the list.
• Do not use when your hands are wet, with the cabinet removed, or
•
600
~
• When “1 Digit Direct” is set to “On”, you cannot select
channel numbers 10 and above entering next digit using
the remote.
Situation:
with attachments not recommended by the manufacturer. Disconnect
the TV set from AC power outlet (mains socket) and antenna during
lightning storms.
Do not install the TV so that it sticks out into an open
space. Injury or damage from a person or object
bumping into the TV may result.
800
z
• Even if “Auto Wide” is set to “On” or “Off”, you can
always modify the format of the screen by pressing
repeatedly.
DCF2.0 or EXIF2.21 supported.
Some channels are blank
Only snow and noise appear on the screen
Power consumption
KLV-29P423D: 45 W
KLV-24P423D: 41 W
KLV-24P413D: 36 W
KLV-22P413D: 34 W
Channels
SVGA
VGA
VESA
Guidelines
~
• If the image contains irregular signals or too much noise,
“Cinema Drive” is automatically turned off even if “Auto”
is selected.
Volume Offset Adjusts the volume level of the current
input relative to other inputs.
USB port
60
Automatically changes the wide mode
according to the input signal from
an external equipment. To keep your
setting, select “Off”.
Reset
~
• Depend on files construction limitation, some of files may not be played.
• The USB device supports FAT16, FAT32 and NTFS.
31.5
Refer (To change the Wide Mode).
Treble
.jpg, .jpe, .jpeg
Screen
480
Auto Wide
Sound Mode Sets a sound mode.
USB Photo format
~
• When the input source is set to “Headphone” in the
“Headphone/Audio Out” under the “AV Set-up” menu,
“Audio Out” is not available in the list.
640
Wide Mode
Sound
Extension
“Variable” : Volume output from audio
out can be controlled
using the TV’s remote.
“Fixed” : The audio output of the TV
is fixed.
VGA
~
• Entering the correct PIN code for blocked channel or
external input will temporarily deactivates the “Parental
Lock” feature. To reactivate the “Parental Lock” settings,
turn off and on the TV.
z
• If you lost your PIN code, refer to (Troubleshooting).
Cinema Drive Provides improved picture movement
when playing BD (Blu-ray Disc™), DVD
or VCR images taken on film, reducing
picture blur and graininess.
Intelligent
Picture Plus
Set-up
USB Music format
Audio Out
Selects sound output from TV speakers
or external audio equipment.
PC input signal reference chart for HDMI IN 1, 2
Standard
“FM Radio Set-up”
“Photo Frame Mode” (KLV-29P423D / KLV-24P423D only)
OR
“Slideshow” / “Picture Frame”
Video Codec
Sets the sound from speaker for a
stereo or bilingual broadcast.
Vertical
frequency
(Hz)
“Channel Set-up”
x To adjust the picture and sound setting
(Video)
Container
Dual Sound
Picture
Horizontal
frequency
(kHz)
“Settings”
Extension
Settings
Vertical
(Line)
In FM Radio mode
4
Horizontal
(Pixel)
~
• For first time using FM Radio function:
USB Video format
z
red
“Device
• If more than one USB detected:
Selection”.
• If you connect the USB device when “USB Auto Start”
is set to “On”, the thumbnail view of photo/music/video
appears automatically.
Signals
x To show photo or picture while listening to
FM Radio
FM Radio
screw holes are left.
mechanical vibrations.
Eco
Reset
Resets the current Eco settings to the
default values.
Power Saving Reduces power consumption of the TV
by adjusting the backlight.
Idle TV
Standby
Turns the TV off after it has been kept
idle for the preset length of time.
PC Power
Switches the TV to standby mode when
Management* the TV receives no signal from the PC
input source for 30 seconds.
* KLV-29P423D and KLV-24P423D only
Specifications
System
Panel system
LCD (Liquid Crystal Display) Panel
TV system
B/G, I, D/K, M
Colour/video system
PAL, PAL60, SECAM, NTSC4.43, NTSC3.58
Channel Coverage
Analogue: UHF/VHF/Cable, depending on your
country/area selection.
Sound Output
10 W + 10 W
Input/Output jacks
Antenna (aerial)/cable
75 ohm external terminal for VHF/UHF
COMPONENT IN/ AUDIO
YPBPR (Component Video): 1080p (50, 60 Hz), 1080i
(50, 60 Hz), 720p (50, 60 Hz), 576p, 576i, 480p, 480i
Audio input (phono jacks)
VIDEO IN
Video input (common phono pin with Y input)
HDMI IN 1, 2
(HDMI IN 2 for KLV-29P423D & KLV-24P413D &
KLV-24P423D only)
Video: 1080p (24, 30, 50, 60 Hz), 1080i (50, 60 Hz),
720p (24, 30, 50, 60 Hz), 576p, 576i, 480p, 480i,
PC Formats
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz,
16, 20 and 24 bits, Dolby Digital
MHL (common with HDMI IN 2 for KLV-29P423D /
KLV-24P423D only)
Video: 1080p (24, 30 Hz), 1080i (50, 60 Hz), 720p
(24, 30, 50, 60 Hz), 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz,
16, 20 and 24 bits, Dolby Digital
PC IN *
PC Input (D-sub 15-pin)
G: 0.7 Vp-p, 75 ohms/R: 0.7 Vp-p,
75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p
* KLV-29P423D and KLV-24P423D only
PC / HDMI AUDIO IN *
PC audio input (mini jack)
* KLV-29P423D and KLV-24P423D only
AUDIO OUT/i
Audio output (stereo minijack)
Headphones jack
AC adapter input