Aeg HK874400FB User Manual
Add to my manuals
24 Pages
AEG HK874400FB is a hob that combines sleek design with innovative features to make cooking easier and more enjoyable. Its induction technology heats cookware quickly and precisely, giving you more control over the cooking process. The hob also has a range of safety features, including a child lock and a residual heat indicator, to ensure that it is safe to use. Additionally, the hob's easy-to-clean glass surface makes maintenance a breeze.
advertisement
▼
Scroll to page 2
of 24
HK874400FB USER MANUAL EN User Manual Hob 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. INSTALLATION............................................................................................................6 4. PRODUCT DESCRIPTION...........................................................................................9 5. DAILY USE.................................................................................................................. 10 6. HINTS AND TIPS........................................................................................................14 7. CARE AND CLEANING.............................................................................................15 8. TROUBLESHOOTING............................................................................................... 16 9. TECHNICAL DATA.................................................................................................... 18 10. ENERGY EFFICIENCY............................................................................................. 19 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. Visit our website for: Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice Register your product for better service: www.registeraeg.com Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop CUSTOMER CARE AND SERVICE Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice. 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or ENGLISH 3 usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • • • • • • • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Do not let children play with the appliance. Keep all packaging away from children and dispose of it appropriately. Keep children and pets away from the appliance when it operates or when it cools down. Accessible parts are hot. If the appliance has a child safety device, this should be activated. Children shall not carry out cleaning and user maintenance of the appliance without supervision. Children aged 3 years and under must be kept away from this appliance when it is in operation at all times. 1.2 General Safety • • • • WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised. Do not operate the appliance by means of an external timer or separate remote-control system. WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. 4 www.aeg.com • • • • • • • • CAUTION: The cooking process has to be supervised. A short term cooking process has to be supervised continuously. WARNING: Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector. If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard. WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents. 2. SAFETY INSTRUCTIONS 2.1 Installation WARNING! Only a qualified person must install this appliance. WARNING! Risk of injury or damage to the appliance. • Remove all the packaging. • Do not install or use a damaged appliance. • Follow the installation instruction supplied with the appliance. • Keep the minimum distance from the other appliances and units. • Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear. • Seal the cut surfaces with a sealant to prevent moisture to cause swelling. • Protect the bottom of the appliance from steam and moisture. • Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened. • If the appliance is installed above drawers make sure that the space, between the bottom of the appliance and the upper drawer, is sufficient for air circulation. • The bottom of the appliance can get hot. Make sure to install a separation ENGLISH panel made from plywood, kitchen carcass material or other nonflammable materials under the appliance to prevent access to the bottom. • Make sure that the ventilation space of 2 mm, between the worktop and the front of the below unit, is free. The warranty does not cover damages caused by the lack of an adequate ventilation space. 2.2 Electrical Connection WARNING! Risk of fire and electrical shock. • All electrical connections should be made by a qualified electrician. • The appliance must be earthed. • Before carrying out any operation make sure that the appliance is disconnected from the power supply. • Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. • Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. • Use the correct electricity mains cable. • Do not let the electricity mains cable tangle. • Make sure that a shock protection is installed. • Use the strain relief clamp on the cable. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable. • The shock protection of live and insulated parts must be fastened in • • • • • 5 such a way that it cannot be removed without tools. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. If the mains socket is loose, do not connect the mains plug. Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. 2.3 Use WARNING! Risk of injury, burns and electrical shock. • Remove all the packaging, labelling and protective film (if applicable) before first use. • Use this appliance in a household environment. • Do not change the specification of this appliance. • Make sure that the ventilation openings are not blocked. • Do not let the appliance stay unattended during operation. • Set the cooking zone to “off” after each use. • Do not rely on the pan detector. • Do not put cutlery or saucepan lids on the cooking zones. They can become hot. • Do not operate the appliance with wet hands or when it has contact with water. • Do not use the appliance as a work surface or as a storage surface. • If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock. 6 www.aeg.com • Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation. • When you place food into hot oil, it may splash. WARNING! Risk of fire and explosion • Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them. • The vapours that very hot oil releases can cause spontaneous combustion. • Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. WARNING! Risk of damage to the appliance. • Do not keep hot cookware on the control panel. • Do not put a hot pan cover on the glass surface of the hob. • Do not let cookware to boil dry. • Be careful not to let objects or cookware fall on the appliance. The surface can be damaged. • Do not activate the cooking zones with empty cookware or without cookware. • Do not put aluminium foil on the appliance. • Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface. • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. 2.4 Care and cleaning • Clean regularly the appliance to prevent the deterioration of the surface material. • Deactivate the appliance and let it cool down before you clean it. • Disconnect the appliance from the electrical supply before maintenance. • Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use any abrasive products, abrasive cleaning pads, solvents or metal objects. 2.5 Disposal WARNING! Risk of injury or suffocation. • Contact your municipal authority for information on how to discard the appliance correctly. • Disconnect the appliance from the mains supply. • Cut off the mains electrical cable close to the appliance and dispose of it. 2.6 Service • To repair the appliance contact an Authorised Service Centre. • Use original spare parts only. 3. INSTALLATION WARNING! Refer to Safety chapters. 3.1 Before the installation Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob. Serial number ........................... 3.2 Built-in hobs Only use the built-in hobs after you assemble the hob into correct built-in ENGLISH units and work surfaces that align to the standards. 3.3 Connection cable • For a single phase or two phase connection, use the cable type: H05BB-F or H03V2V2-F which withstands a temperature of 70°C or higher. • To replace the damaged mains cable, use the cable: H05BB-F or H03V2V2-F which withstands a temperature of 70°C or higher. 3.4 Assembly min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm B 57 mm 41 mm 31 mm B > 20 mm min. 500 mm A 12 mm 28 mm 38 mm A B < 20 mm 7 min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm 8 www.aeg.com min. 38 mm min. 2 mm R 5mm min. 55mm +1 490+1mm 750 mm min. 12 mm min. 2 mm 3.5 Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. ENGLISH 9 4. PRODUCT DESCRIPTION 4.1 Cooking surface layout 1 1 1 2 1 Induction cooking zone 2 Control panel 1 4.2 Control panel layout 1 2 3 10 11 4 5 6 9 8 7 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function field Comment STOP+GO To activate and deactivate the function. - Heat setting display To show the heat setting. - Timer indicators of cooking To show for which zone you set the time. zones - Timer display To show the time in minutes. 5 Grill Function To activate and deactivate the function. 6 Lock / The Child Safety De- To lock / unlock the control panel. vice 7 - 1 2 3 4 To select the cooking zone. 10 www.aeg.com Sensor Function field / 8 9 10 - 11 Comment - To increase or decrease the time. ON / OFF To activate and deactivate the hob. Control bar To set a heat setting. Power function To activate and deactivate the function. 4.3 Heat setting displays Display Description The cooking zone is deactivated. The cooking zone operates. - STOP+GO function operates. Automatic Heat Up function operates. Power function operates. + digit There is a malfunction. / OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual heat. / Lock / The Child Safety Device function operates. Incorrect or too small cookware or no cookware on the cooking zone. Automatic Switch Off function operates. 4.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. 5. DAILY USE WARNING! Refer to Safety chapters. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. ENGLISH 5.1 Activating and deactivating 11 control bar until you reach the correct heat setting. Touch for 1 second to activate or deactivate the hob. 5.2 Automatic Switch Off The function deactivates the hob automatically if: • all cooking zones are deactivated, • you do not set the heat setting after you activate the hob, • you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel. • the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again. • you use incorrect cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. • you do not deactivate a cooking zone or change the heat setting. After comes on and the hob some time deactivates. The relation between the heat setting and the time after which the hob deactivates: Heat setting ,1-3 The hob deactivates after 6 hours 4-7 5 hours 8-9 4 hours 10 - 14 1.5 hour 5.3 The heat setting To set or change the heat setting: Touch the control bar at the correct heat setting or move your finger along the 5.4 Using the cooking zones Put the cookware on the cross / square which is on the surface that you cook. Cover the cross / square fully. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. You can cook with the large cookware on two cooking zones at the same time. 5.5 Grill Function Use this function with the Maxisense Plancha Grill1) accessory. This function connects two right side cooking zones under the accessory and they operate as one. First set the heat setting for one of the right side cooking zones. To activate the function: touch . To set or change the heat setting touch one of the right control sensors. To deactivate the function: touch The cooking zones operate independently. 5.6 Automatic Heat Up Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then 1) The accessory is not supplied with the appliance. For more information, please contact your local supplier. . 12 www.aeg.com continues to cook at the desired heating setting. To activate the function the cooking zone must be cold. To activate the function for a cooking zone: touch ( comes on). Immediately touch a desired heat setting. After 5 seconds comes on. To deactivate the function: change the heat setting. 5.7 Power function This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting. Refer to “Technical data” chapter. To activate the function for a cooking zone: touch . comes on. To deactivate the function: change the heat setting. 5.8 Timer Count Down Timer You can use this function to set how long the cooking zone should operate for a single cooking session. To change the time: set the cooking zone with . Touch or . To deactivate the function: set the and touch . The cooking zone with remaining time counts back to 00. The indicator of the cooking zone goes out. When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates. To stop the sound: touch . CountUp Timer (The count up timer) You can use this function to monitor how long the cooking zone operates. To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. To activate the function: touch of the timer. comes on. When the indicator of the cooking zone starts to flash slowly the time counts up. The display switches between counted time (minutes). and To see how long the cooking zone operates: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows how long the zone operates. To deactivate the function: set the cooking zone with and touch or First set the heat setting for the cooking zone then set the function. . The indicator of the cooking zone goes out. To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. Minute Minder You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate. The of To activate the function: touch the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down. To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time. heat setting display shows . To activate the function: touch . or of the timer to set the Touch time. When the time comes to an end, the sound operates and 00 flashes. To stop the sound: touch . ENGLISH 13 comes on. Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the hob. When you The function has no effect on the operation of the cooking zones. deactivate the hob with operates again. 5.9 STOP+GO This function sets all cooking zones that operate to the lowest heat setting. the function When the function operates, you cannot change the heat setting. 5.12 OffSound Control (Deactivating and activating the sounds) The function does not stop the timer functions. Deactivate the hob. Touch for 3 seconds. The display comes on and goes To activate the function: touch comes on. out. Touch . To deactivate the function: touch . The previous heat setting comes on. • 5.10 Lock To activate the function: touch . comes on for 4 seconds. The Timer stays on. To deactivate the function: touch . The previous heat setting comes on. 5.11 The Child Safety Device This function prevents an accidental operation of the hob. To activate the function: activate the . Do not set the heat setting. for 4 seconds. comes on. . To deactivate the function: activate the hob with Touch . Do not set the heat setting. for 4 seconds. Deactivate the hob with comes on. . To override the function for only one cooking time: activate the hob with • • • • you can you touch Minute Minder comes down Count Down Timer comes down you put something on the control panel. 5.13 Power management When you deactivate the hob, you also deactivate this function. Deactivate the hob with - the sounds are off When the function is set to hear the sounds only when: Set the heat setting first. Touch or - the sounds are on • To confirm your selection wait until the hob deactivates automatically. You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting. hob with for 3 seconds. comes on. Touch of the timer to choose one of the following: . • Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration. • Each phase has a maximum electricity loading of 3700 W. • The function divides the power between cooking zones connected to the same phase. • The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W. • The function decreases the power to the other cooking zones connected to the same phase. • The heat setting display of the reduced zones alternates between the chosen heat setting and the reduced heat setting. After some time the heat setting display of the reduced zones stays on the reduced heat setting. 14 www.aeg.com 6. HINTS AND TIPS WARNING! Refer to Safety chapters. 6.1 Cookware For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly. Use the induction cooking zones with correct cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain. Cookware is correct for an induction hob if: • some water boils very quickly on a zone set to the highest heat setting. • a magnet pulls on to the bottom of the cookware. The bottom of the cookware must be as thick and flat as possible. Cookware dimensions Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit. The cooking zone efficiency is related to the diameter of the cookware. The cookware with a smaller diameter than the minimum receives only a part of the power generated by the cooking zone. Refer to “Technical data” chapter. 6.2 The noises during operation If you can hear: • crack noise: cookware is made of different materials (sandwich construction). • whistle sound: you use the cooking zone with high power level and the cookware is made of different materials (sandwich construction). • humming: you use high power level. • clicking: electric switching occurs. • hissing, buzzing: the fan operates. The noises are normal and do not refer to hob malfunction. 6.3 Öko Timer (Eco Timer) To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation. 6.4 Examples of cooking applications The relation between the heat setting and the cooking zone consumption of power is not linear. When you increase ENGLISH the heat setting, it is not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. Heat setting 15 The data in the table is for guidance only. Use to: Time (min) Hints Keep cooked food warm. as necessary Put a lid on the cookware. 1-3 Hollandaise sauce, melt: butter, chocolate, gelatine. 5 - 25 Mix from time to time. 1-3 Solidify: fluffy omelettes, baked eggs. 10 - 40 Cook with a lid on. 3-5 Simmer rice and milkbased dishes, heating up readycooked meals. 25 - 50 Add the minimum twice as much liquid as rice, mix milk dishes part procedure through. 5-7 Steam vegetables, fish, meat. 20 - 45 Add some tablespoons of liquid. 7-9 Steam potatoes. 20 - 60 Use max. ¼ l water for 750 g of potatoes. 7-9 Cook larger quantities of food, 60 - 150 stews and soups. Up to 3 l liquid plus ingredients. 9 - 12 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts. as necessary Turn halfway through. 12 - 13 Heavy fry, hash browns, loin steaks, steaks. 5 - 15 Turn halfway through. 14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips. -1 Boil large quantities of water. Power function is activated. 7. CARE AND CLEANING WARNING! Refer to Safety chapters. 7.1 General information • Clean the hob after each use. • Always use cookware with clean bottom. • Scratches or dark stains on the surface have no effect on how the hob operates. • Use a special cleaner applicable for the surface of the hob. • Use a special scraper for the glass. 16 www.aeg.com 7.2 Cleaning the hob stains, shiny metallic discoloration. Clean the hob with a moist cloth and non-abrasive detergent. After cleaning, wipe the hob dry with a soft cloth. • Remove shiny metallic discoloration: use a solution of water with vinegar and clean the glass surface with a moist cloth. • Remove immediately: melted plastic, plastic foil, sugar and food with sugar. If not, the dirt can cause damage to the hob. Take care to avoid burns. Put the special scraper on the glass surface at an acute angle and move the blade on the surface. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat 8. TROUBLESHOOTING WARNING! Refer to Safety chapters. 8.1 What to do if... Problem Possible cause You cannot activate or oper- The hob is not connected to ate the hob. an electrical supply or it is connected incorrectly. The fuse is blown. Remedy Check if the hob is correctly connected to the electrical supply. Refer to the connection diagram. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. Activate the hob again and set the heat setting in less than 10 seconds. You touched 2 or more sensor fields at the same time. Touch only one sensor field. STOP+GO function operates. Refer to "Daily use" chapter. There is water or fat stains on the control panel. Clean the control panel. An acoustic signal sounds You put something on one and the hob deactivates. or more sensor fields. An acoustic signal sounds when the hob is deactivated. Remove the object from the sensor fields. The hob deactivates. Remove the object from the sensor field. You put something on the sensor field . ENGLISH 17 Problem Possible cause Remedy Residual heat indicator does not come on. The zone is not hot because If the zone operated suffiit operated only for a short ciently long to be hot, speak time. to an Authorised Service Centre. Automatic Heat Up function does not operate. The zone is hot. Let the zone become sufficiently cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels. Power management function Refer to "Daily use" chapter. operates. The sensor fields become hot. The cookware is too large or Put large cookware on the you put it too near to the rear zones if possible. controls. There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals. Refer to "Daily use" chapter. comes on. Automatic Switch Off operates. Deactivate the hob and activate it again. comes on. The Child Safety Device or the Lock function operates. Refer to "Daily use" chapter. comes on. There is no cookware on the zone. Put cookware on the zone. The cookware is incorrect. Use the correct cookware. Refer to “Hints and tips” chapter. The diameter of the bottom of the cookware is too small for the zone. Use cookware with correct dimensions. Refer to “Technical data” chapter. The cookware does not cover the cross / square. Cover the cross / square fully. There is an error in the hob. Disconnect the hob from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect it again. and a number come on. If comes on again, speak to an Authorised Service Centre. 18 www.aeg.com Problem Possible cause Remedy comes on. The electrical connection is Speak to a qualified electriincorrect. The supply voltage cian to check the installation. is out of range. comes on. There is an error in the hob because a cookware boiled dry. Automatic Switch Off and the overheating protection for the zones operate. Deactivate the hob. Remove the hot cookware. After approximately 30 seconds, activate the zone again. If the cookware was the problem, the error message goes out. Residual heat indicator can stay on. Let the cookware become sufficiently cool. Check if your cookware is compatible with the hob. Refer to “Hints and tips” chapter. comes on. The cooling fan is blocked. Check if objects block the comes on cooling fan. If again, speak to an Authorised Service Centre. comes on. The electrical connection is incorrect. The hob is connected only to one phase. 8.2 If you cannot find a solution... If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass Speak to a qualified electrician to check the installation. Refer to the connection diagram. surface) and an error message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. 9. TECHNICAL DATA 9.1 Rating plate Model HK874400FB Typ 60 GBD CC AU Induction 7.4 kW Ser.Nr. ................. AEG PNC 949 597 216 00 220 - 240 V 50 - 60 Hz Made in Germany 7.4 kW ENGLISH 19 9.2 Cooking zones specification Cooking zone Nominal power Power function (maximum heat [W] setting) [W] Power function Cookware diammaximum dura- eter [mm] tion [min] Left front 2300 3200 10 125 - 210 Left rear 2300 3200 10 125 - 210 Right front 2300 3200 10 125 - 210 Right rear 2300 3200 10 125 - 210 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware. For optimal cooking results use cookware not larger than the diameter in the table. 10. ENERGY EFFICIENCY 10.1 Product information according to EU 66/2014 Model identification HK874400FB Type of hob Built-In Hob Number of cooking zones 4 Heating technology Induction Diameter of circular cooking zones (Ø) Left front Left rear Right front Right rear 21.0 cm 21.0 cm 21.0 cm 21.0 cm Energy consumption per cooking zone (EC electric cooking) Left front Left rear Right front Right rear 174.3 Wh / kg 167.5 Wh / kg 189.0 Wh / kg 167.5 Wh / kg Energy consumption of the hob (EC electric hob) EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance The energy measurements referring to the cooking area are identified by the crosses of the respective cooking zones. 10.2 Energy saving You can save energy during everyday cooking if you follow below hints. 174.5 Wh / kg • When you heat up water, use only the amount you need. • If it is possible, always put the lids on the cookware. • Before you activate the cooking zone put the cookware on it. • Put the smaller cookware on the smaller cooking zones. • Put the cookware directly in the centre of the cooking zone. 20 www.aeg.com • Use the residual heat to keep the food warm or to melt it. 11. ENVIRONMENTAL CONCERNS Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of * appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. ENGLISH 21 22 www.aeg.com ENGLISH 23 867332811-B-142019 www.aeg.com/shop
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement