LG STB-5500 Owner's manual

OWNER’S MANUAL
SET-TOP BOX
Please read this manual carefully before operating your set and
retain it for future reference.
STB-5500-GB
www.lg.com
*MFL70180533*
P/NO : MFL70180533 (1811-REV01)
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Warning! Safety instructions
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
•• Please read these safety precautions carefully before using the product.
•• In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.
•• Manufacturer and installer cannot provide service related to human safety as the applicable wireless device has possibility of electric
wave interference.
•• Keep away from heat sources like electrical heaters.
-- Electrical shock, fire, malfunction or deformation may occur.
•• Keep the anti-moisture packing material or vinyl packing out of the reach of children.
-- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
•• Do not use the product in damp place such as a bathroom or any place where it is likely to get wet.
-- This may cause a fire or could give an electric shock.
•• Do not place the product where it might be exposed to dust.
-- This may cause a fire hazard.
•• Do not leave the power or signal cable unattended on the pathway.
-- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
•• TV and Set-Top Box shall be installed and used on distance greater than 20cm from human body.
•• Install the product in a neat and dry place.
-- Dust or moisture can cause electrical shock, fire or product damage.
•• If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service centre.
-- If you continue to use without taking proper measures, electrical shock or fire can occur.
•• Do not put heavy objects on the product or sit upon it.
-- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
•• If you dropped the product or the case is broken, turn off the product and unplug the power cord.
-- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service centre.
•• Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as
paper and matches. Children must pay particular attention.
-- Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and
contact the service centre.
2
ENGLISH
•• Install the product where no radio wave occurs.
•• Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are
not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
•• Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may
break out.
•• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug
completely or wipe dust off. You may be electrocuted due to excess moisture.
•• If you don’t intend to use the product for a long time, unplug the power cable from the product.
-- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
•• Never touch this product or antenna during a thunder or lighting storm.
-- You may be electrocuted.
•• Do not insert any metal objects/conductors (like a metal chopstick / cutlery / screwdriver) between power cable plug and
input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal. You may be electrocuted.
•• DISCONNECTING DEVICE FROM MAINS
-- Mains plug is the disconnecting device. The plug must remain readily operable.
•• Make sure to turn off the product. Make sure to remove all cables before moving the product.
-- You may be electrocuted or the product can be damaged.
•• Do not disassemble, repair or modify the product at your own discretion.
-- Fire or electric shock accident can occur.
-- Contact the service centre for check, calibration or repair.
•• Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock
accident can occur.
•• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be
exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
•• Do not put heavy objects or many objects on the product.
-- It may disable normal wireless connection with the TV or cause problem to the product.
•• Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
-- You may be injured or the product can be damaged.
•• In the event that an image does not appear on the screen please switch it off and unplug it from the mains supply and
contact your service centre.
-- This may cause a fire or electric shock hazard.
•• Never touch the wall outlet when there is leakage of gas, open the windows and ventilate.
-- It may cause a fire or a burn by a spark.
•• Do not place anything containing liquid on top of the product such as flowerpot, cup, cosmetics or candle.
-- This may cause a fire hazard.
•• If water is split into the product, unplug it from the mains supply outlet immediately and consult your service centre.
-- This may cause an electric shock hazard.
•• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to
fall.
•• Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more than 10cm from
the wall).
-- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
3
ENGLISH
•• Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
-- The product can be deformed or fire can break out due to overheating inside the product.
•• Install the product on a flat and stable place that has no risk of dropping the product.
-- If the product is dropped, you may be injured or the product may be broken.
•• When installing the product on a table, be careful not to place it near the edge.
-- This may cause the product to fall causing serious injury to a child or adult and serious damage to the product. Only
use a suitable stand.
•• Do not place the product close to source of steam or oil such as a humidifier.
-- This may create a fire hazard or an electric shock hazard.
•• Keep the product away from direct sunlight.
-- The product can be damaged.
•• Do not place the product in a built-in installation such as bookcase or rack.
-- Ventilation required.
•• Do not unplug the power cord while the product is in use.
-- Electrical shock can damage the product.
•• Ensure the power cord does not come into contact with hot objects such as a heater.
-- This may cause a fire or an electric shock hazard.
•• Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only
that appliance and has no additional outlets or branch circuits.
•• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.
•• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn
off this unit by SWITCH.
•• Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power
plug for switch.)
-- It may cause mechanical failure or could give an electric shock.
•• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
•• Prevent dust collecting on the power plug pins or outlet.
-- This may cause a fire hazard.
•• Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
•• Do not shock the product when moving it.
-- You may be electrocuted or the product can be damaged.
•• Make the panel face forward and hold it with both hands to move.
-- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service centre for
repair.
•• Do not dispose the product-packing box. Use it when you move.
4
ENGLISH
•• Read these instructions.
•• Keep these instructions.
•• Heed all warnings.
•• Follow all instructions.
•• Do not put or store inflammable substances near the product.
-- There is a danger of explosion or fire due careless handling of the inflammable substances.
•• Use authorized detergent only when cleaning the product. Do not clean your product with chemicals including glass
cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc.,
which can damage the product and/ or its panel.
-- Product can be deformed.
•• Take a rest from time to time to protect your vision.
•• Take a regular break when using with a product for a long time.
•• Keep the product clean at all times.
•• Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it.
•• Only use the attachments / accessories specified by the manufacturer.
•• When cleaning the product surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean
with a wet cloth.
-- The water can sink into the product, which can cause electric shock or serious malfunction.
•• Contact the service centre once a year to clean the internal parts of the product.
-- Accumulated dust can cause mechanical failure.
•• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•• Only use the specified type of battery. This could cause damage to the remote control.
•• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
•• Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight, open fireplace and
electric heaters.
•• Do not place non-rechargeable batteries in charging device.
•• Do not use high voltage electrical goods near the product(e.g. electric mosquito-swatter). This may result in product
malfunction.
•• If water or another substance enters the product (like a AC adapter, power cord, TV), disconnect the power cord and
contact the service centre immediately. Otherwise, this may result in fire or electric shock.
•• Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
•• Never Disassemble the AC adapter or power cord. This may result in fire or electric shock.
•• Be careful in handling the adapter to prevent any external shocks to it. An external shock may cause damage to the
adapter.
5
Assembling and preparing
ENGLISH
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your
product. The illustrations in this manual may differ from the actual product and item.
•• Do not use any unapproved items to ensure the safety and product life span.
•• Any damage or injuries caused by using unapproved items are not covered by the warranty.
•• The items supplied with your product may vary depending on the model.
•• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
•• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your Set-Top Box’s USB port.
•• When connecting two USB devices at the same time, each one should have bezels less than 8.5 mm thick.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
•• Use a certified cable with the HDMI logo attached.
•• If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI Cable
Types)
-- High-Speed HDMI®/™ Cable (3 m or less)
-- High-Speed HDMI®/™ Cable with Ethernet (3 m or less)
6
ENGLISH
Set-Top Box
Owner’s manual
Power Cord / AC-DC Adapter
(Depending on model)
HDMI Cable
TLM Cable
A/V Adapter Cable
Dual Lock™ (4 EA)
Screw (M6 x L18) (1 EA)
Spacer (1 EA)
IR Receiver (1 EA)
Rubber (6 EA)
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
AN-VC550
Smart Camera
AN-MR650
Magic Remote
7
Parts and components
Front Panel
ENGLISH
Power Indicator
Rear Panel
8
How to use rubber (optional)
(Image shown may differ from your product.)
Fix the rubber to the Set-Top Box and use it when you want to.
ENGLISH
1 Attach the rubber to the bottom of the product as shown in the image.
2 Press firmly the whole part of Rubber to ensure firm fastening.
Rubber
•• Doing so can prevent the product from sliding.
•• If Set-Top Box is not a perfect fit on the rear side of your TV, please place and use it on a flat surface.
•• Please do not fix rubber with excessive force.
•• Please make sure no foreign substances exist on the surface of the product, and then firmly attach the rubber.
9
How to use Dual LockTM (optional)
(Image shown may differ from your product.)
Fix the Set-Top Box to the TV and use it when you want to.
ENGLISH
1 Attach the Dual Lock™ in pairs first. Press firmly the whole part of Dual Lock™ to ensure firm fastening of the protruding parts with
each other.
2 After removing the protection paper from the one side of Dual Lock™, stick them to the back of Set-Top Box as shown.
Dual Lock™
3 After removing the protection paper from the spacer, stick it to a VESA screw hole on the back of the TV. (However, you can choose
the location to attach the spacer randomly by considering the shape of the rear side of the TV and the attachment location of the
Set-Top Box.)
Spacer
or
4 After removing the protection paper from the Dual Lock™, stick Set-Top Box to the TV. Insert and tighten the screw on the hole with
the spacer attached. (When tightening the screws, be sure not to over tighten them to avoid deformation of the spacer.)
M6 x L18
1 EA
or
•• Do not mount by Dual lock™ only without screw.
•• If Set-Top Box is not a perfect fit on the rear side of your TV, please place and use it on a flat surface.
•• Do not fasten the screw with excessive force.
•• Please make sure no foreign substances exist on the surface of the product, and then firmly attach the Dual Lock™.
•• Before attaching the Set-Top Box to the TV set, let the attached Dual Lock™ dry for at least three days.
10
Making connections
•• The external device connections shown may differ slightly
from illustrations in this manual.
•• Connect external devices to the Set-Top Box regardless about
the order of the Set-Top Box port.
•• Refer to the external equipment’s manual for operating
instructions.
•• If you connect a gaming device to the Set-Top Box, use the
cable supplied with the gaming device.
•• Using a DVI to HDMI cable may cause compatibility issues.
Connect the Set-Top Box to a wall antenna socket with an RF
cable (75 Ω).
ENGLISH
You can connect various external devices to the product. For
more information on external device’s connection, refer to the
manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs,
audio systems, USB storage devices, PC, gaming devices, and
other external devices.
Antenna connection
ANTENNA/
CABLE IN
Wall Antenna
Socket
(*Not Provided)
•• Use a signal splitter to use more than 2 TVs.
•• If the image quality is poor, install a signal amplifier properly
to improve the image quality.
•• If the image quality is poor with an antenna connected, try
to realign the antenna in the correct direction.
•• An antenna cable and converter are not supplied.
•• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital
Plus, HE-AAC
11
Satellite dish connection
Adapter connection
Connect the Set-Top Box to a satellite dish to a satellite socket
with a satellite RF cable (75 Ω).
ENGLISH
Power Cord
POWER
13/18V
700mA Max
LNB
Satellite IN
Satellite Dish
AC-DC Adapter
•• Please be sure to connect the Set-Top Box to
the AC-DC power adapter before connecting
the Set-Top Box’s power plug to a wall power
outlet.
(*Not Provided)
12
Other connections
Connect your Set-Top Box to external devices. For the best picture and audio quality, Connect the external device using an HDMI cable as
shown. Some separate cable is not provided.
ENGLISH
•• Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the
Set-Top Box.
Front
IN 1
IN 2
USB IN 2
USB IN 1
USB
HDMI OUT
DVI OUT
HUB
Blu-Ray / HD Cable Box / HD STB / DVD / PC
13
Rear
ENGLISH
TV / Monitor
TV
RS-232C IN
HDMI IN
DVI IN
HDMI Cable
POWER
ETHERNET
TLM Cable
OUT AUDIO OUT
SERVICE AV IN
DISPLAY
IR IN CONTROL
13/18V
700mA Max
LNB
ANTENNA/
Satellite IN CABLE IN
A/V Adapter Cable
GND IR +3.5 V
YELLOW
WHITE
RED
YELLOW
WHITE
RED
YELLOW
WHITE
RED
DIGITAL
AUDIO IN
Digital Audio System
VIDEO
L/MONO AUDIO R
Blu-Ray / HD Cable Box / DVD / VCR
14
External IR receiver
LAN
Licenses
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
ENGLISH
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing
Limited. DTS, DTS-HD, the Symbol, & DTS or DTS-HD and the Symbol together are registered
trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.
Open source software notice information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to [email protected].
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this
information.
15
Maintenance
ENGLISH
Cleaning your Set-Top Box
Clean your Set-Top Box regularly to keep the best performance and to extend the product lifespan.
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately
with a dry cloth.
Remove the accumulated dust or dirt on the AC-DC adapter regularly.
•• Make sure to turn the power off and disconnect the power cord and all other cables first.
•• When the Set-Top Box is left unattended and unused for a long time, disconnect the power cord from the wall outlet
to prevent possible damage from lightning or power surges.
•• Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in scratches and
image distortions.
•• Do not use any chemicals as this may damage the product.
•• Do not spray liquid onto the surface. If water enters the Set-Top Box, it may result in fire, electric shock, or malfunction.
Troubleshooting
The software version can be updated for improvement in performance. Customer needs to ensure the compatibility of customer’s
equipment with LGE software. If needed, please consult with LGE and upload revised software version according to the guidance
provided by LGE.
Problem
16
Solution
Cannot control the SetTop Box with the remote
control.
•• Check the remote control sensor on the product and try again.
•• Check if there is any obstacle between the product and the remote control.
•• Check if the batteries are still working and properly installed ( to , to
Set-Top Box does not
output any video or
audio.
•• Check if the product is turned on.
•• Check if the power cord is connected to a wall outlet.
•• Check if there is a problem in the wall outlet by connecting other products.
The Set-Top Box turns off
suddenly.
•• Check the power control settings. The power supply may be interrupted.
When connecting to
the PC (HDMI/DVI), ‘No
signal’ or ‘Invalid Format’
is displayed.
•• Turn the Set-Top Box off/on using the remote control.
•• Reconnect the HDMI/DVI cable.
•• Restart the PC with the Set-Top Box on.
).
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
STB-5500-GB
233 x 29.8 x 180.5
Weight (kg)
ENGLISH
MODEL
Dimensions (W x H x D) (mm)
0.76
Power requirement
19 V
2.7 A
Manufacturer: APD
Model: DA-65F19
Manufacturer: Lien Chang
Model: LCAP40
AC-DC Adapter
Input : AC 100 – 240 V ~ 50 / 60 Hz
Output : DC 19 V 3.42 A
Wireless module specification
•• As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the
regional frequency table.
•• For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and
the body.
Wireless module (LGSBWAC61) specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
5150 to 5725 MHz
5725 to 5850 MHz (Not for EU)
15.5 dBm
17.5 dBm
8.0 dBm
Bluetooth
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
10 dBm
* “IEEE802.11ac” is not available in all countries.
The use of the 5,150 – 5,350 MHz band is restricted to indoor use only. This restriction exists in the countries Australia (AU) and New
Zealand (NZ). (For Wi-Fi/Bluetooth built-in model or Wi-Fi built-in model)
17
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Environment condition
ENGLISH
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
(Depending on country)
Digital TV
Analogue TV
Television system
DVB-T/T2¹
DVB-T/T2/C/S/S2²
PAL B/B, PAL B/G, PAL D/K, PAL-I
SECAM B/G, SECAM D/K
NTSC-M
Programme coverage
(Band)
VHF, UHF
C-Band², Ku-Band²
VHF, UHF, CATV
Maximum number of storable
programmes
DVB-T/T2 & Analogue TV : 3,000
DVB-S/S2 : 6,000
External antenna impedance
75 Ω
1 Only DVB-T2 support models.
2 Only DVB-T2/C/S2 support models.
18
HDMI-DTV Supported Mode
HDMI-PC Supported Mode
(Only HDMI IN 1 and HDMI IN 2)
720 x 480
720 x 576
1280 x 720
1920 x 1080
3840 x 2160
4096 x 2160
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
31.47
31.50
31.25
44.96
45.00
37.50
28.12
33.72
33.75
26.97
27.00
33.71
33.75
56.25
67.43
67.50
53.95
54.00
56.25
61.43
67.50
112.50
135.00
135.00
53.95
54.00
56.25
61.43
67.50
112.50
135.00
135.00
59.94
60.00
50.00
59.94
60.00
50.00
50.00
59.94
60.00
23.97
24.00
29.97
30.00
50.00
59.94
60.00
23.98
24.00
25.00
29.97
30.00
50.00
59.94
60.00
23.98
24.00
25.00
29.97
30.00
50.00
59.94
60.00
•• PC audio not supported.
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
640 x 350
31.46
70.09
720 x 400
31.46
70.08
640 x 480
31.46
59.94
800 x 600
37.87
60.31
1024 x 768
48.36
60.00
1152 x 864
54.34
60.05
1280 x 1024
63.98
60.02
1360 x 768
47.71
60.01
1920 x 1080
3840 x 2160
4096 x 2160
67.50
60.00
67.50
56.25
54.00
53.95
54.00
30.00
25.00
24.00
23.97
24.00
ENGLISH
Resolution
(Only HDMI IN 1 and HDMI IN 2)
•• The optimal display resolution
-- 3840 x 2160
HDMI Output (DTV)
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
1280 x 720
1920 x 1080
3840 x 2160
45.00
67.50
135
60.00
60.00
60
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
1366 x 768
48.00
60.00
HDMI Output (PC)
19
Photo Format
File Format
Format
Resolution
ENGLISH
.jpeg, .jpg, .jpe
JPEG
Minimum: 64 (W) x 64 (H)
Maximum
Normal Type : 15,360 (W) x 8,640 (H) / Progressive Type: 1,920 (W) x 1,440 (H)
.png
PNG
Minimum: 64 (W) x 64 (H)
Maximum: 5,760 (W) x 5,760 (H)
.bmp
BMP
Minimum: 64 (W) x 64 (H)
Maximum: 1,920 (W) x 1,080 (H)
Audio Format
File Format
Item
Bit rate
.mp3
16 kHz ~ 48 kHz
Support
MPEG1, MPEG2
Bit rate
Sample freq.
Support
Programmes
Bit rate
.ogg
Sample freq.
Support
Programmes
Bit rate
.wma
32 Kbps - 320 Kbps
Sample freq.
Programmes
.wav
Info
Sample freq.
Support
Programmes
mono, stereo
8 kHz ~ 48 kHz
PCM
mono, stereo
64 Kbps - 320 Kbps
8 kHz ~ 48 kHz
Vorbis
mono, stereo
128 Kbps - 320 Kbps
8 kHz ~ 48 kHz
WMA
up to 6 ch
•• The number of supported programmes may vary depending on the sample frequency.
20
Video Codec
Extension
.avi
.mp4
.m4v
.mov
.3gp
.3g2
.mkv
.ts
.trp
.tp
.mts
.mpg
.mpeg
.dat
.vob
.mkv
.mp4
.ts
.rm
.rmvb
Video
VC-1 Advanced Profile (WMVA excluded), VC-1 Simple and Main Profiles
Audio
WMA Standard (WMA v1/WMA Speech excluded)
Video
XViD(except 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM,
DTS
Video
H.264/AVC, MPEG-4, HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3)
Video
H.264/AVC, MPEG-4
Audio
AAC, AMR-NB, AMR-WB
Video
MPEG-2, MPEG-4, H.264/AVC, VP8, VP9, HEVC
Audio
Dolby Digital, Dolby Digital Plus, AAC, PCM, DTS, MPEG-1 Layer I, II,
MPEG-1 Layer III (MP3)
Video
H.264/AVC, MPEG-2, HEVC
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital
Plus, AAC, PCM
Video
MPEG-1, MPEG-2
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3)
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
Video
H.264/AVC, H.265(HEVC)
Audio
Dolby Digital, Dolby Digital Plus, AAC
ENGLISH
.asf
.wmv
Codec
•• The optimal display resolution : 3840 x 2160.
Video
RV30, RV40
Audio
Realaudio6(cook), AAC LC, HE-AAC
•• This feature is available in certain countries only.
21
ENGLISH
22
ENGLISH
23
Record the model number and serial number of the
Set-Top Box.
Refer to the label on the cover and quote this
information to your dealer when requiring any
service.
MODEL
SERIAL