LG OLED55C9MLB Owner's Manual
Add to my manuals
30 Pages
LG OLED55C9MLB features the latest display technologies such as Perfect Black, Perfect Color and Perfect HDR and Dolby Vision™, which delivers cinematic images with deep blacks, vibrant colors and remarkable clarity. It also boasts an advanced sound system with Dolby Atmos® capable of delivering immersive audio experiences for your movies, TV shows, and music.
advertisement
▼
Scroll to page 2
of 30
d er *MFL71100402* (1901-REV00) OLED55C9* OLED65C9* 1 2 3 4 5 6 8 9 X7 (M4 x L20) AA Head washer Head Head washer HeadHead washer washer washerFrançais ղࢶQU ৮ࢿػࠂઁೞৈ ղࢶQU 1BUIGJOEFS6OJUF৻ࢶઁ ղࢶQU QU "MJHOTUSPLFPVUTJEF Biztonság és szabályozás megtekintése. Read Safety andwasher Magyar Regulatory. ৮ࢿػࠂઁೞৈ7 For the power supply and power consumption, refer A tápellátásra és az áramfogyasztásra vonatkozó ղࢶQU to the label attached to the product. adatok a készülékre ragasztott címkén találhatók. ղࢶQU 1BUIGJOEFS6OJUF৻ࢶઁ Lesen Sie die Sicherheitsanweisungen und Richtlinien. Prosimy o przeczytanie৮ࢿػࠂઁೞৈ Zasad bezpieczeństwa i uwag ղࢶQU dotyczących przepisów. Informationen zur Stromversorgung und zum StromverQU "MJHOTUSPLFPVUTJEF ղࢶQU brauch sind dem Etikett auf dem Gerät zu entnehmen. Dokładne informacje o1BUIGJOEFS6OJUF৻ࢶઁ zasilaniu i zużyciu energii są ৮ࢿػࠂઁೞৈ umieszczone na etykiecie znajdującej się na produkcie. ৮ࢿػࠂઁೞৈ QU "MJHOTUSPLFPVUTJEF 1BUIGJOEFS6OJUF৻ࢶઁ Lire le document Sécurité et mesures réglementaires. Přečtěte si část Bezpečnost a zákonné předpisy. Česky ৮ࢿػࠂઁೞৈ 1BUIGJOEFS6OJUF৻ࢶઁ ৮ࢿػࠂઁೞৈ Info . QU "MJHOTUSPLFPVUTJEF ýrobku. 1BUIGJOEFS6OJUF৻ࢶઁ QU "MJHOTUSPLFPVUTJEF 1BUIGJOEFS6OJUF৻ࢶઁ Slovenčina Prečítajte si bezpečnostné a regulačné informácie. Leggere il manuale Sicurezza e normative. QU "MJHOTUSPLFPVUTJEF Informácie o zdroji napájania a spotrebe elektrickej Per l'alimentazione e il consumo di energia, consultare QU "MJHOTUSPLFPVUTJEF energie nájdete na štítku pripojenom k zariadeniu. l'etichetta applicata sul prodotto. Head Leer Seguridad y normativa. Para obtener información acerca de la fuente de alimentación y el consumo de energía, consulte la etiqueta del producto. Ler informações sobre a Segurança e Regulamentos. Head Română Consultaţi manualul referitor la siguranţă şi reglementare. Pentru sursa de alimentare şi consumul de energie, consultaţi eticheta ataşată pe produs. Български Прочетете Безопасност и регулаторни стандарти. Направете справка с етикета на продукта за електрозахранването и консумацията на енергия. Lugege ohutus- ja normatiivteavet. Toiteallika ja energiatarbe kohta saate teavet tootele kinnitatud märgiselt. Perskaitykite Saugos ir norminius reikalavimus. Informacijos apie maitinimą ir energijos sąnaudas rasite etiketėje ant gaminio. ղࢶQU Veiligheidsinformatie en regelgeving lezen. Informatie over de stroomvoorziening en het stroomverbruik vindt u op het label op het product. Eesti Διαβάστε τις οδηγίες για την ασφάλεια και τους κανονισμούς. Για πληροφορίες σχετικά με την τροφοδοσία και την κατανάλωση ενέργειας, δείτε την ετικέτα του προϊόντος. Preberite varnostne in regulativne vidike. Podatke o napajanju in porabi energije si oglejte na nalepki izdelka. Lietuvių k. Hrvatski Pročitajte Sigurnost i usklađenost s propisima. Informacije o napajanju i potrošnji energije potražite na oznaci koja se nalazi na proizvodu. Srpski Shqip Lex “Siguria dhe rregullimi”. . konsumin e energjisë, Për ushqimin me energji dhe shih etiketën e ngjitur në produkt. Norsk Les sikkerhet og forskrifter. Hvis du vil ha informasjon om strømforsyning og strømforbruk, kan du se på etiketten som er festet på produktet. Pročitajte dio Sigurnost i propisi. Informacije o napajanju električnom energijom i potrošnji električne energije možete pronaći na naljepnici koja se nalazi na proizvodu. Dansk Læs sikkerhed og lovmæssige bestemmelser. Du kan få oplysninger om strømforsyning og strømforbrug på mærket, der sidder på produktet. Прочитајте за безбедноста и регулативата. За напојувањето и потрошувачката на енергија, погледнете ја етикетата која е прикачена на производот. Suomi Lue Turvallisuus ja säännökset -osio. Tietoja virtalähteestä ja virrankulutuksesta on laitteeseen kiinnitetyssä tarrassa. washer Ελληνικά Slovenščina Македонски Läs Säkerhet och föreskrifter. För strömförsörjning och strömförbrukning, se etiketten på produkten. Latviešu 10 11 ৮ࢿػࠂઁೞৈ 1BUIGJOEFS6OJUF৻ࢶઁ Izlasiet sadaļu Drošība un normatīvi. QUpadevi "MJHOTUSPLFPVUTJEF Informāciju par elektroenerģijas un patēriņu skatiet izstrādājumam pievienotajā etiķetē. Pročitajte odeljak Bezbednost i regulatorna pitanja. Da biste saznali informacije u vezi sa napajanjem i potrošnjom energije, pogledajte oznaku na proizvodu. : Depending on model / Abhängig vom Modell / Selon le modèle / In base al modello / En función del modelo / Dependendo do modelo / Afhankelijk van het model / Ανά λογα με το μοντέ λο / Odvisno od modela / Típusfüggő / Zależnie od modelu / Závisí na modelu / V závislosti od modelu / În funcţie de model / В зависимост от модела / Sõltub mudelist / Priklauso nuo modelio / Atkarībā no modeļa / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit / Ovisno o modelu / Во зависност од моделот / Beroende på modell / Avhengig av modell / Afhængigt af modellen / Mallin mukaan AV IN VIDEO L/MONO VIDEO AUDIO L/MONO R AUDIO R AV IN Head ղࢶQU washer ৮ࢿػࠂઁೞৈ 1BUIGJOEFS6OJUF৻ࢶઁ QU "MJHOTUSPLFPVUTJEF Kg A E 90° Satellite IN Sub D B Satellite IN Sub Satellite IN Main Satellite IN Main G A F B C C D E F G F (mm) (kg) OLED55C9PLA OLED55C97LA 1228 738 251 706 46.9 23.0 18.9 OLED65C9PLA OLED65C97LA 1449 862 251 830 46.9 33.9 25.2 Power requirement AC 100-240 V ~ 50 / 60 Hz OWNER’S MANUAL Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. *MFL71140303* (1903-REV00) www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved. Warning! Safety Instructions ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. •• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. •• Do not place the TV and/or remote control in the following environments: -- Keep the product away from direct sunlight. -- An area with high humidity such as a bathroom -- Near any heat source such as stoves and other devices that produce heat. -- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil. -- An area exposed to rain or wind. -- Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit). -- Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. -- Do not install in excessively dusty places. Otherwise, this may result in fire, electric shock, combustion/ explosion, malfunction or product deformation. 2 •• Ventilation -- Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. -- Do not install the product on a carpet or cushion. -- Do not block or cover the product with cloth or other materials while unit is plugged in. •• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. •• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device. •• Do not move the TV whilst the Power cord is plugged in. •• Do not use a damaged or loosely fitting power cord. •• Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. •• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock. •• Disconnecting the Device from the Main Power -- The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible. •• Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. •• Outdoor Antenna Grounding (Can differ by country): -- If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 •• Batteries -- Store the accessories (battery, etc.) in a safe location out of the reach of children. -- Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat. •• Moving -- When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury. •• Keep the packing anti-moisture material or vinyl packing out of the reach of children. •• Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen. •• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to screen. •• Cleaning -- When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage. ENGLISH •• Grounding (Except for devices which are not grounded.) -- TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth ground wire to prevent possible electric shock. •• Never touch this apparatus or antenna during a lightning storm. You may be electrocuted. •• Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out. •• Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact the customer service. •• Do not touch the end of the power cord while it is plugged in. You may be electrocuted. •• If any of the following occur, unplug the product immediately and contact your local customer service. -- The product has been damaged. -- If water or another substance enters the product (like an AC adapter, power cord, or TV). -- If you smell smoke or other odors coming from the TV -- When lightning storms or when unused for long periods of time. Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in. •• Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction. •• Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product. •• Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. •• Never disassemble the AC adapter or power cord. This may result in fire or electric shock. •• Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter. •• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off. 3 Preparing Separate Purchase ENGLISH •• If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. •• Image shown may differ from your TV. •• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• The available menus and options may differ from the input source or product model that you are using. •• New features may be added to this TV in the future. •• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord. •• The items supplied with your product may vary depending on the model. •• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. •• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports if the USB cable or USB memory stick does not fit into your TV’s USB port. B B A A The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies. Magic Remote Control AN-MR19BA Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote. Wall Mounting Bracket (Depending on model) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. A * A ≦ 10 mm B * B ≦ 18 mm •• Use a certified cable with the HDMI logo attached. •• If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI Cable Types) -- Ultra High-Speed HDMI®/TM cable (3 m or less) 4 Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. OLED55/65B9* Model OLED55/65C9* OLED55/65E9* VESA (A x B) (mm) 300 x 200 Standard screw M6 Number of screws 4 Wall mount bracket OLW480B OLED77B9* OLED77C9* 400 x 200 M6 4 OLW480B Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. •• Hold the side and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. (Not applicable for OLED55/65E9*) ENGLISH •• It is recommended to move the TV in the box or packing material that the TV originally came in. •• Before moving or lifting the TV, disconnect the power cord and all cables. •• When holding the TV, the screen should face away from you to avoid damage. •• Hold the side of the TV with one hand, and hold the bottom of the rear cover or the side of the Stand with the other. (Hold the rear cover when placing the TV on the floor. Holding the bottom glass may result in injury.) (Only OLED55/65E9*) •• When transporting the TV, do not expose the TV to jolts or excessive vibration. •• When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. •• Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen. •• When handling the TV, be careful not to damage the protruding buttons. • Avoid touching the screen at all times, as this may result in damage to the screen. • When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. • Do not scratch or hit the glass with metal materials or objects. It may damage the TV or lead to an accident. (Only OLED55/65E9*) •• When transporting a large TV, there should be at least 2 people. •• When transporting the TV by hand, hold the TV as shown in the following illustration. (Only OLED55/65E9*) 5 Mounting on the Table Securing TV to the Wall 1 Lift and tilt the TV into its upright position on a table. ENGLISH •• Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm 10 cm 10 cm (Depending on model) 2 Connect the power cord to a wall outlet. • Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) • If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. • Do not use any unapproved items to ensure the safety and product life span. • Any damage or injuries caused by using unapproved items are not covered by the warranty. • Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. 6 (Depending on model) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. •• If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. •• Use a platform or cabinet that is strong and large enough to support the TV securely. •• Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer. Mounting to the Wall •• Please use the accessory cable holder when hanging on the wall. (Only OLED55/65C9*) 10 cm 10 cm 10 cm ENGLISH Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts. •• Attach the three covers when installing the wall mount. (Only when the item is provided.) (Only OLED55/65E9*) 10 cm 10 cm (Depending on model) • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. • For more information of screws and wall mount bracket, refer to the Separate purchase. • If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. • When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV. • Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall. 7 Connections ENGLISH Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Antenna/Cable Connect the TV to a wall antenna socket with an RF cable (75 Ω). •• Use a signal splitter to use more than 2 TVs. •• If the image quality is poor, install a signal amplifier properly to improve the image quality. •• If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. •• An antenna cable and converter are not supplied. •• For a location that is not supported with ULTRA HD broadcasting, this TV cannot receive ULTRA HD broadcasts directly. • Supported HDMI Audio format : DTS (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz), DTS HD (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz), True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz) (Depending on model) • → ( ) → [Picture] → [Additional Settings] → [HDMI ULTRA HD Deep Colour] -- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) -- Off : Support 4K @ 50/60 Hz 8 bit (4:2:0) If the device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI ULTRA HD Deep Colour] setting to off. Satellite dish USB Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). (Depending on model) Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly. CI module External Devices View the encrypted (pay) services in digital TV mode. (Depending on model) Available external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. •• Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot. •• If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. 8 HDMI •• The external device connection may differ from the model. •• Connect external devices to the TV regardless of the order of the TV port. •• If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. •• Refer to the external equipment’s manual for operating instructions. Basic functions <A type> Power On (Press) Power Off 1 (Press and Hold) ENGLISH •• If you connect a gaming device to the TV, use the cable supplied with the gaming device. •• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [PICTURE] menu until the picture is clear. •• In PC mode, some resolution settings may not work properly depending on the graphics card. •• If ULTRA HD content is played on your PC, video or audio may become disrupted intermittently depending on your PC’s performance. (Depending on model) •• When connecting via a wired LAN, it is recommended to use a CAT 7 cable. (Only when port is provided.) Menu Control (Press 2) Menu Selection (Press and Hold 3) 1 All running apps will close, and any recording in progress will stop. (Depending on country) 2 You can access and adjust the menu by pressing the button when TV is on. 3 You can use the function when you access menu control. <B type> Power On (Press) Using Button Power Off 1 (Press and hold) You can simply operate the TV functions, using the button. Volume Control <A type> Programmes Control 1 All running apps will close, and any recording in progress will stop. (Depending on country) Adjusting the menu <B type> When the TV is turned on, press the the Menu items using the button. button one time. You can adjust <A type> Turns the power off. Changes the input source. Adjusts the volume level. Scrolls through the saved programmes. <B type> Turns the power off. Accesses the settings menu. Clears on-screen displays and returns to TV viewing. Changes the input source. 9 Using Magic Remote Control ENGLISH The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. When the message [Magic Remote battery is low. Please change the battery.] is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching the and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. 1 1 1 (POWER) Turns the TV on or off. / You can turn your set-top box on or off by adding the settop box to the universal remote control for your TV. Number buttons Enters numbers. Accesses the [QUICK HELP]. (DASH) Inserts a between numbers such as 2-1 and 2-2. / Accesses the saved programmes list. (More Actions) Displays more remote control functions. Edits QUICK ACCESS. -- QUICK ACCESS is a feature that allows you to enter a specified app or Live TV directly by pressing and holding the number buttons. Audio descriptions function will be enabled. Adjusts the volume level. (MUTE) Mutes all sounds. (MUTE) Accesses the [Accessibility] menu. Scrolls through the saved programmes. (Voice recognition) Network connection is required to use the voice recognition function. Once the voice display bar is activated on the TV screen, press and hold the button and speak your command out loud. (HOME) Accesses the Home menu. (HOME) Shows the previous history. (Q. Settings) Accesses the Quick Settings. (Q. Settings) Displays the [All Settings] menu. Wheel (OK) Press the center of button to select a menu. You can change programmes by using button. (up/down/left/right) Press the up, down, left or right button to scroll the menu. If you press buttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. / Returns to the previous level. / Clears on-screen displays and returns to last input viewing. / Shows programme guide. 1 1 (Some buttons and services may not be provided depending on models or regions.) 10 To use the button, press and hold for more than 1 second. -- When you are not watching via a set-top box: the display changes to the set-top box screen. , , , These access special functions in some menus. Runs the record function. , (Control buttons) Controls media contents. Registering Magic Remote Control How to register the Magic Remote Control • It is recommended that an Access Point (AP) be located more than 0.2 m away from the TV. If the AP is installed closer than 0.2 m, the Magic remote control may not perform as expected due to frequency interference. • Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. • Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. • This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information. • Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like. ENGLISH 1 Streaming Service buttons Connects to the Video Streaming Service. (INPUT) Changes the input source. (INPUT) Accesses the [HOME DASHBOARD]. Displays the set-top box Home menu. To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the the remote control. Wheel (OK) on * If the TV fails to register the Magic Remote, try again after turning the TV off and back on. How to deregister the Magic Remote Control Press the / and (HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV. * Pressing and holding the / re-register Magic Remote at once. User Guide For more information about this TV, read the USER GUIDE embedded in the product. •• To open the USER GUIDE This TV] → [User Guide] → ( ) → [General] → [About button will let you cancel and 11 Troubleshooting Cannot control the TV with the remote control. ENGLISH •• Check the remote control sensor on the product and try again. •• Check if there is any obstacle between the product and the remote control. •• Check if the batteries are still working and properly installed ( to , to ). No image display and no sound is produced. •• Check if the product is turned on. •• Check if the power cord is connected to a wall outlet. •• Check if there is a problem in the wall outlet by connecting other products. The TV turns off suddenly. •• Check the power control settings. The power supply may be interrupted. •• Check if the auto-off function is activated on the settings related time. •• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. When connecting to the PC (HDMI), no signal is detected. •• Turn the TV off/on using the remote control. •• Reconnect the HDMI cable. •• Restart the PC with the TV on. Abnormal Display •• If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product. •• This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (white, red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund. •• You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. Generated Sound •• “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. •• Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. • Make sure to wring any excess water or cleaner from the cloth. • Do not spray water or cleaner directly onto the TV screen. • Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen. 12 Specifications (Depending on country) Digital TV Television system Analogue TV PAL B/B, PAL B/G, PAL D/K, PAL-I, DVB-T/T2, DVB-C, DVB-S/S2 DVB-S/S2* DVB-C* 950 ~ 2,150 MHz 46 ~ 890 MHz SECAM B/G, SECAM D/K, NTSC-M DVB-T/T2* VHF III : 174 ~ 230 MHz UHF IV : 470 ~ 606 MHz Channel coverage (Band) ENGLISH Broadcasting Specifications UHF V : 606 ~ 862 MHz 46 ~ 862 MHz S Band II : 230 ~ 300 MHz S Band III : 300 ~ 470 MHz Maximum number of storable programmes 6,000 3,000 External antenna impedance 75 Ω CI Module (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm * Only DVB-T2/C/S2 support model only. Wireless module (LGSBWAC92) Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 18 dBm 5,150 to 5,725 MHz 18 dBm 5,725 to 5,850 MHz (Not for EU) 12 dBm Bluetooth Frequency Range Output Power (Max.) 2,400 to 2,483.5 MHz 8 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. * IEEE 802.11ac is not available in all countries. Environment condition Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % 13 Open Source Software Notice Information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information. Licenses (Magic Remote supported models only) 14 Important Information for Preventing Image Retention Examples of Images that may Cause Image Retention •• Still images or fixed images containing certain information that are displayed uninterrupted on the screen, such as channel numbers, station logos, program titles, news or movie subtitles, and headlines. •• Fixed menu or icons for video game consoles or broadcasting set-top boxes. •• Black bars shown on the left, right, top, or bottom of the screen, such as in images with a 4:3 or 21:9 ratio. Recommended Measures for Preventing Image Retention •• Avoid watching a video displaying an image as listed above for extended periods of time. •• Adjust your TV settings as below when turning on a video exhibiting an image as listed above for extended periods of time. -- [Picture] → [Picture Mode Settings] → [Picture Mode] → [Eco] -- [Picture] → [Picture Mode Settings] → [OLED LIGHT] → Adjust to lower value -- [Picture] → [Additional Settings] → [OLED Panel Settings] → [Logo Luminance Adjustment] → [High] •• Turn off the menu bar of an external device, such as a set-top box, to prevent long-term display of the menu bar of such device. (Please refer to the manual of the applicable external device for instructions.) •• Adjust the settings as below when watching a video constantly showing black bars on the left, right, top or bottom, in order to remove the black bars. -- [Picture] → [Aspect Ratio Settings] → [Aspect Ratio] → [Vertical Zoom] or [All-Direction Zoom] ENGLISH OLED is a self-emissive technology, which brings many significant benefits to image quality and performance. As with any self-emitting display, it is possible for users of OLED TVs to experience temporary image retention under certain conditions, such as when displaying a static image on the screen for a long time. Even so, this phenomenon is rare under ordinary viewing conditions and is not a malfunction. Below sets forth helpful information you may refer to for using your OLED TV. Information on Functions Supporting Image Quality in Relation to Temporary Image Retention •• OLED TV offers a function called Pixel Refresher, which helps to prevent temporary image retention. This function can be operated automatically or manually. •• The auto feature will activate when the TV power is turned off, but only after the TV has been turned on for a cumulated total of four (4) hours or more, which need not be consecutive. Pixel Refresher will automatically run for several minutes after the screen is turned off. (Please note that failure to supply the AC power or disconnecting the power cord from the outlet will disable the auto feature.) •• To manually activate Pixel Refresher, you will have to select [Picture] → [Additional Settings] → [OLED Panel Settings] → [Pixel Refresher] in the settings. Once manually activated, the function will run for approximately one (1) hour. During this time, a horizontal line may appear on the screen; however, this is not a malfunction. •• If Pixel Refresher has not been manually activated for a certain period of time, a pop-up window advising to activate this function will appear on the screen. Please follow the instructions set forth in the pop-up window. •• In addition to Pixel Refresher, there are other functions available for protecting the screen from image retention. For example, a function that automatically reduces the screen brightness level, in part or in whole, will be activated when a static image is displayed uninterrupted on the screen. Once the static image disappears, the brightness level will automatically return to the previous level. This function is an intended function, and not a malfunction. 15 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. Model Serial No. OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com 2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models. Code (Hexa) Function Note Code (Hexa) Function Note 00 CH +, PR + R/C Button 53 List R/C Button 01 CH -, PR - R/C Button 5B Exit R/C Button 02 Volume + R/C Button 60 PIP(AD) R/C Button 03 Volume - R/C Button 61 Blue R/C Button 06 > (Arrow Key / Right Key) R/C Button 63 Yellow R/C Button 07 < (Arrow Key / Left Key) R/C Button 71 Green R/C Button 08 Power R/C Button 72 Red R/C Button 09 Mute R/C Button 79 Ratio / Aspect Ratio R/C Button 0B Input R/C Button 91 AD (Audio Description) R/C Button 0E SLEEP R/C Button 7A User Guide R/C Button 0F TV, TV/RAD R/C Button 7C Smart / Home R/C Button R/C Button 7E SIMPLINK R/C Button 10 - 19 * Number Key 0 - 9 1A Q.View / Flashback R/C Button 8E ►► (Forward) R/C Button 1E FAV (Favorite Channel) R/C Button 8F ◄◄ (Rewind) R/C Button 20 Text (Teletext) R/C Button AA Info R/C Button 21 T. Opt (Teletext Option) R/C Button AB Program Guide R/C Button 28 Return (BACK) R/C Button B0 ► (Play) R/C Button 30 AV (Audio / Video) Mode R/C Button B1 ꕗ (Stop / File List) R/C Button 39 Caption/Subtitle R/C Button BA ꕘ (Freeze / Slow Play / Pause) R/C Button 40 Λ (Arrow Key / Cursor Up) R/C Button BB Soccer R/C Button 41 V (Arrow Key / Cursor Down) R/C Button BD ꔄ (REC) R/C Button 42 My Apps R/C Button DC 3D R/C Button 43 Menu / Settings R/C Button 99 AutoConfig R/C Button 44 OK / Enter R/C Button 9F App / * R/C Button 45 Q.Menu R/C Button 9B TV/PC R/C Button 4C List, - (ATSC Only) R/C Button * Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models) EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided. USB to Serial converter with USB Cable USB IN USB Type (PC) (TV) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID :IN0x2008) USB to serial converter RS-232C (CONTROL & SERVICE) which is not made nor provided by LG. • It can be purchased from computer stores that carry accessories for IT support professionals. (TV) (PC) USB IN RS-232C With RS232C Cable (PC) (TV) SERVICE ONLY DE9 (D-Sub 9pin) Type 1 • You need to purchase the RS-232C (DE9, D-Sub 3 9pin female-to-female type) to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual. (PC) 2 RS-232C IN (CONTROL & SERVICE) (PC) SERVICE ONLY 1 3 RS-232C IN (CONTROL & SERVICE) 2 (PC) (TV) 1 3 (PC) The connection interface may differ from your TV. (TV) 2 (TV) (TV) 1 3 (PC) RS-232C IN 2 RS-232C IN (CONTROL & SERVICE) RS-232C IN (CONTROL & SERVICE) (CONTROL & SERVICE) (TV) ENGLISH ENG EXTERNAL CONTROL DEVICE SETUP USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV. 1 3 (PC) (PC) 1 3 2 2 - or (TV) (TV) (TV) (TV) 1 3 (PC) (PC) SERVICE ONLY ONLY SERVICE ENGLISH ENG Phone jack Type 1 3 RS-232C IN (CONTROL & SERVICE) 2 RS-232C IN (CONTROL & SERVICE) 2 Customer Computer (TV) (TV) RS-232C configurations 3-Wire Configurations(Not standard) 1 5 PC RXD RS-232C IN (CONTROL & SERVICE) TXD RS-232C IN (CONTROL & SERVICE) GND 6 2 2 TXD 3 1 RXD 5 3 GND OR 9 RS-232C (Serial port) TV RXD 3 2 TXD TXD 2 1 RXD GND 5 3 GND D-Sub 9 Phone Set ID For Set ID number, see "Real Data Mapping" on p.6 1. Press SETTINGS to access the main menus. 2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK. 3. Press the Navigation buttons to scroll to SET ID and press OK. 4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99. 5. When you are finished, press EXIT. * (Depending on model) EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08. Color/ Colour k i 00 to 64 09. Tint k j 00 to 64 k 00 to 32 l 00 to 01 m 00 to 01 04. Volume Mute 05. Volume Control 10. k Sharpness 11. OSD k Select 12. Remote Control Lock k Mode 13. Treble k r 00 to 64 14. Bass k s 00 to 64 COMMAND1 COMMAND2 DATA (Hexadecimal) 15. Balance k 16. Color (Colour) x Temperature 17. ISM Method (Only j Plasma TV) t 00 to 64 u 00 to 64 p (p.8) 18. Equalizer j v (p.8) q 00 to 05 a (p.9) b 00 to 01 19. Energy j Saving 20. Tune m Command 21. Channel m (Programme) Add/Del(Skip) 22. Key m c Key Codes 23. Control Backlight, Control Panel Light 24. Input select (Main) 25. 3D (Only 3D models) 26. Extended 3D (Only 3D models) 27. Auto Configure m g 00 to 64 x b (p.11) x t (p.11) x v (p.11) j u (p.12) * Note:During playing or recording media, all commands except Power (ka) and Key (mc) are not executed and treated as NG. With RS232C cable, TV can communicate "ka command" in power-on or power-off status. but with USB-to-Serial converter cable, the command works only if TV is on. 6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] :You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled. * [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on transmission/receiving protocol. [DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command. [Cr] : Carriage Return - ASCII code ‘0x0D’ [ ] : Space – ASCII code ‘0x20’ OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 00: Illegal Code Real data mapping (Hexadecimal b Decimal) * When you enter the [data] in hexadecimal, refer to following conversion table. * Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number. 00 : Step 0 01 : Step 1 (Set ID 1) ... 0A : Step 10 (Set ID 10) ... 0F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) ... 32 : Step 50 (Set ID 50) 33 : Step 51 (Set ID 51) ... 63 : Step 99 (Set ID 99) ... C7 : Step 199 C8 : Step 200 ... FE : Step 254 FF : Step 255 ... 01 00 : Step 256 ... 27 0E : Step 9998 27 0F : Step 9999 ... EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02. Aspect Ratio (Command: k c) (Main Picture Size) ►► To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01 : Normal screen 07 : 14:9 (4:3) (Europe, Colombia, Mid-East, 02 : Wide screen Asia except South Korea and (16:9) Japan) 04 : Zoom 09 : * Just Scan 05 : Zoom 2 0B : Full Wide (Latin America (Europe, Colombia, Midexcept Colombia East, Asia except South Only) Korea and Japan) 06 : Set by Program/ 10 to 1F : C inema Zoom 1 Original to 16 Ack [c][ ][Set ID][ ][OK/NG][Data][x] Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04. Volume Mute (Command: k e) ►► To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK/NG][Data][x] 05. Volume Control (Command: k f) ►► To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [f][ ][Set ID][ ][OK/NG][Data][x] 06. Contrast (Command: k g) ►► To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. * In DTV/HDMI/Component mode (high-definition), Just Scan is available. * Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially. 07. Brightness (Command: k h) ►► To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 03. Screen Mute (Command: k d) ►► To select screen mute on/off. Ack [h][ ][Set ID][ ][OK/NG][Data][x] Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on 08. Color/Colour (Command: k i) ►► To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] ENGLISH ENG * Commands may work differently depending on model and signal. 8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 0 0 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] 14. Bass (Command: k s) ►► To adjust Bass. You can also adjust in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [s][ ][Set ID][ ][OK/NG][Data][x] * (Depending on model) 15. Balance (Command: k t) ►► To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [t][ ][Set ID][ ][OK/NG][Data][x] Data Min : 00 to Max : 32 Ack [k][ ][Set ID][ ][OK/NG][Data][x] 16. Color(Colour) Temperature (Command: x u) 11. OSD Select (Command: k l) ►► To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off ►► To adjust colour temperature. You can also adjust Color(Colour) Temperature in the PICTURE menu. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [u][ ][Set ID][ ][OK/NG][Data][x] 01 : OSD on Ack [l][ ][Set ID][ ][OK/NG][Data][x] 17. ISM Method (Command: j p) (Only Plasma TV) 12. Remote control lock mode (Command: k m) ►► To lock the front panel controls on the monitor and remote control. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on ►► To control the ISM method. You can also adjust ISM Method in OPTION menu. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data Min : 02: Orbiter 08: Normal 20: Color(Colour) Wash Ack [p][ ][Set ID][ ][OK/NG][Data][x] Ack [m][ ][Set ID][ ][OK/NG][Data][x] * If you are not using the remote control, use this mode. When main power is off & on (plug-off and plug-in, after 20 - 30 seconds), external control lock is released. 18. Equalizer (Command : j v) ►► Adjust EQ of the set. Transmission [j][v][ ][Set ID][ ][Data][Cr] MSB * In the standby mode (DC off by off timer or ‘ka’, ‘mc’ command), and if key lock is on, TV will not turn on by power on key of IR & Local Key. 0 Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [r][ ][Set ID][ ][OK/NG][Data][x] 0 0 0 0 Frequency 13. Treble (Command: k r) ►► To adjust treble. You can also adjust in the AUDIO menu. LSB 0 0 0 Data 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) 0 0 1 2nd Band 0 0 0 0 1 1(decimal) 0 1 0 3rd Band ... ... ... ... ... ... 0 1 1 4th Band 1 0 0 1 1 19(decimal) EXTERNAL CONTROL DEVICE SETUP 0 0 5th Band 1 0 1 0 0 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Off 01 : Minimum 02 : Medium 03 : Maximum 04 : Auto (For LCD TV / LED TV) / Intelligent sensor (For PDP TV) 05 : Screen off * (Depending on model) Ack [q][ ][Set ID][ ][OK/NG][Data][x] Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 2. Tune to the digital antenna (DVB-T) Channel 01. Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Antenna TV = 10 Result = ma 00 00 01 10 3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40 Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x] • For South Korea, North/Latin America except Colombia Model ►► To tune channel to following physical/major/minor number. Transmission [m][a][ ][0][ ][Data00][ ][Data01] 20. Tune Command (Command: m a) * This command may work differently depending on model and signal. • For Europe, Mid-East, Colombia, Asia except South Korea and Japan Model ►► Select channel to following physical number. Transmission [m][a][ ][Set ID][ ][Data 00][ ] [Data 01][ ][Data 02][Cr] * Analog Antenna/Cable [Data 00][Data 01] Channel Data Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV) - 80 : Cable TV (CATV) * Digital Antenna/Cable/Satellite [Data 00][Data 01]: Channel Data Data 00 : High Channel data Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 02 : Input Source (Digital) - 10 : Antenna TV (DTV) - 20 : Antenna Radio (Radio) - 40 : Satellite TV (SDTV) - 50 : Satellite Radio (S-Radio) - 90 : Cable TV (CADTV) - a0 : Cable Radio (CA-Radio) * Tune Command Examples: 1. Tune to the Analog antenna (PAL) Channel 10. [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital. * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) * Digital Antenna/Cable Data 00 : xx (Don't care) [Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data Data 05 : Input Source (Digital) - 02 : Antenna TV (DTV) – Use Physical Channel Number - 06 : Cable TV (CADTV) – Use Physical Channel ENGLISH ENG 1 9 10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1.Tune to the Analog cable (NTSC) channel 35. Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analog Cable TV = 01 Total = ma 00 23 00 00 00 00 01 2.Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = Digital Antenna TV = 22 Total = ma 00 00 00 1E 00 03 22 Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] • For Japan Model ►► To tune channel to following physical/major/minor number. Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] Data 05 = Digital Antenna TV = 02 Total = ma 00 00 00 11 00 01 02 2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07 Total = ma 00 00 00 1E 00 00 07 * This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b) ►► To skip current channel(programme) for next time. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Del(ATSC,ISDB)/Skip(DVB) Ack [b][ ][Set ID][ ][OK/NG][Data][x] * Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add. 22. Key (Command: m c) ►► To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] * Digital Antenna/Satellite Data 00: xx (Don't care) Data Key code - p.2. [Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) 23. Control Backlight (Command: m g) [Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 04: Low byte Channel Data Data 05 : Input Source (Digital/Satellite for Japan) - 02 : Antenna TV (DTV) - 07 : BS (Broadcasting Satellite) - 08 : CS1 (Communication Satellite 1) - 09 : CS2 (Communication Satellite 2) * Tune Command Examples: 1 Tune to the digital antenna (ISDB-T) channel 17-1. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 01 : Add Ack [c][ ][Set ID][ ][OK/NG][Data][x] • For LCD TV / LED TV ►► To control the backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] Control Panel Light (Command: m g) • For Plasma TV ►► To control the panel light. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV O 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 21 : AV2 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26. Extended 3D(Command: x v) (only 3D models) (Depending on model) ►► To change 3D option for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] [Data 01][Cr] Ack [b][ ][Set ID][ ][OK/NG][Data][x] * This function depends on model and signal. 25. 3D(Command: x t) (only 3D models) (Depending on model) ►► To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data 03][Cr] * (Depending on model) Data Structure [Data 00]00 : 3D On 01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D [Data 01]00 : Top and Bottom 01 : Side by Side 02 : Check Board 03 : Frame Sequential 04 : Column interleaving 05 : Row interleaving [Data 02]00 : Right to Left 01 : Left to Right [Data 03]3D Effect(3D Depth): Min : 00 - Max : 14 (*transmit by Hexadecimal code) * [Data 02], [Data 03] functions depend on model and signal. * If [Data 00] is 00 (3D On), [Data 03] has no meaning. * If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning. * If [Data 00] is 03 (2D to 3D), [Data 01] and [Data 02] have no meaning. * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only. * All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal. [Data 02] O Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] 40 : Component1 60 : RGB [Data 01] O X : don’t care 20 : AV or AV1 [Data 00] 00 [Data 03] [Data 00]3D option 00 : 3D Picture Correction 01 : 3D Depth (3D Mode is Manual Only) 02 : 3D Viewpoint 06 : 3D Color Correction 07 : 3D Sound Zooming 08 : Normal Image View 09 : 3D Mode (Genre) [Data 01]It has own range for each 3D option determined by [Data 00]. 1) When[Data 00] is 00 00 : Right to Left 01 : Left to Right 2) When[Data 00] is 01, 02 DataMin: 0 - Max: 14 (*transmit by Hexadecimal code) Data value range(0 - 20) converts Viewpoint range (-10 - +10) automatically (Depending on model) * This option works when 3D Mode (Genre) is manual only. 3) When[Data 00] is 06, 07 00 : Off 01 : On 4) When[Data 00] is 08 00 : Revert to 3D video from 3D-to-2D converted 2D video 01 : Change 3D video to 2D video, except 2D-to-3D video * If conversion condition doesn’t meet, command is treated as NG. 5) When [Data 00] is 09 00 : Standard 02 : Cinema 04 : Manual 01 : Sport 03 : Extreme 05 : Auto Ack [v][ ][Set ID][ ][OK][Data00][Data01][x] [v][ ][Set ID][ ][NG][Data00][x] ENGLISH ENG 24. Input select (Command: x b) (Main Picture Input) 11 12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Flat 139.7 cm (55") OLED
- 4K Ultra HD 3840 x 2160 pixels 16:9
- DVB-C, DVB-S2, DVB-T2
- Smart TV Internet TV
- Wi-Fi Ethernet LAN Bluetooth Miracast
- High Dynamic Range (HDR) supported
- 111 W
Related manuals
Frequently Answers and Questions
What is the power requirement of the device?
AC 100-240 V ~ 50 / 60 Hz
How much does the device weigh?
OLED55C9MLB weighs 23.0 kg
advertisement