advertisement
▼
Scroll to page 2
of 17
FC999NY_NA5HLL_88C.ENG 2/18/03 3:28 PM Page 1 user guide Video Recorder Model: LV3799 LV2788 LV2778 LV3798 LV2288 LV2578 LV3598 LV2378 LV3398 English R PAL Before please connecting, operating or adjusting your new VCR, read this user guide carefully. Thank you. Model No. FC999NY/FC991NY/FD941NY/FC934NY/FC491Y/ FC431Y/FC290Y/FD240Y/FC230Y Part No. 3834RP0088C FC999NY_NA5HLL_88C.ENG 2/18/03 3:28 PM Page 2 Contents, safety and cleaning Please read the information following carefully. 2 Contents Safety ? Introducing your video recorder and remote control 3 Position your Video Recorder so that falls no directly Connecting to a ? television and satellite receiver 4 Tuning TV stations Adjusting 5 TV stations ? 6 manually Cleaning bright light or sunlight ? Ensure that your Video Recorder is in a position to allow a free placed flow of air. onto it. your Video Recorder ShowView damp cloth, expose your Video Recorder to exposed to cleaners any unnecessary vibration, moisture, dust or heat. and that no During electrical storms it is accidental unplug both the aerial plug to prevent damage to your Video ? liquids, placed dripping or splashing objects filled with such on as vases, shall be the apparatus. Advanced functions Troubleshooting comply If your Video Recorder still does not operate properly, unplug it and DIRECTIVE 89/336/EEC, call your dealer. Your VCR should not be repaired by anyone except qualified service personnel. 15 16 manufactured to ? ? specifications a soft apply liquid aerosol cleaners. Never spray cleaning liquids the Video Recorder. on or near Never the top cover of your Video Recorder as this can remove expose you to very and other hazards. high voltage requirements of EEC 93/68/EEC and 73/23/EEC. cleaning is with the radio interference 11-14 Technical product Do not operate your Video Recorder if it is damaged. 9 10 or do not Video head This ? 8 (LV3799/LV2778 Only) supply. The apparatus shall not be Care should be taken not to Recorder and TV. Television programs Timer recording the Video Recorder from advisable to 7 Recording Unplug the mains 2 Clean the cabinet with cable and mains Operating 1 High quality video tapes will not normally deposit dirt onto the video heads, but old or damaged tapes may. This dirt can accumulate on the video heads after a long period of time and cause become blurred the picture to broken up. To clean the video heads use a video heads or cleaning tape electrical stores. available from FC999NY_NA5HLL_88C.ENG Introducing 2/18/03 3:29 PM Page 3 your Video Recorder and Remote Control Most of your Video Recorder's functions are accessed using the Remote Control. A summary of the functions of the main buttons are shown below (right), other buttons are described elsewhere in this guide. using the remote control, press the VCR or TV button to select the device to be operated. Basic functions of your Video Recorder can also be operated using the control panel on the front of your Video Recorder. Before 3 To turn the Video Recorder To record the programme you on. After be turning on, the Video Recorder operated by the Remote Control To stop eject the tape or are can To control an LG TV only. If your LG TV respond, press the TV and no. 2 buttons, together. To reset, press TV and button 1. Removing the To control the Video Recorder watching does not To rewind To Tape Compartment a tape play a tape Remote Control's batteries auto resets To fast forward a this feature. tape (LG TV control button MUTE and TV To watch one TV TV/VCR TV VCR MUTE AV) To turn the TV channel whilst recording AV3 VIDEO IN PROG. L-AUDIO REC/ITR another. sound MENU To display the Display Panel Remote To Pause Control a tape or by frame To reset the tape counter to zero view it frame Sensor LV2778 P/STILL P/STILL 30 picture secs. To record programme being watched REC/ITR REW To pause and view frame by frame FF PLAY LV3598/LV2578/LV3398 ez POWER OFF 23 move through the menus, after accessing by PROG. STOP To select the buttons to RECITR search CM SKIP Use the 3/4/1/2 PROG To fast forward VOL CLEAR LP recording speed of the tape LV2788/LV2288 OK VOL input recording for source TV AV CLK/CNT on and off on To select the PROG. screen menu Select the channel you AV i P/STILL IN-R want to watch. : POWER, PROG. (4/3), VOL(1/2), ez REPEAT See page 13 456 them via the MENU button. sockets Audio IN Video IN are for Only : Video IN and Audio IN connecting devices such as Video Cameras, Games you want to watch Usethe1and2 them buttons to an Audio Visual cable. LV3799/LV3798/LV2778 by pressing AV): sockets on Only : Simulcast Recording (With SC mode only recording using the Audio IN (L/R) Hi-Fi sound the front of your Video Recorder. This feature enables you to simulcast sound transmitted source and the picture transmitted by the TV station. by an audio SHOWVIEW C.LOCK To switch the child (3/4). Consoles and other Video Recorders. You will need to connect to using 7890 Select the channel LV3799/LV3798/LV2778 lock VIDEO Plus+ on and off change the TV volume. Press OK to LV3799/LV2778 approve a menu item or show the clock Don't or Only : To the programme for ShowView display menu programming counter. forget to install three AAA type batteries in the Remote Control. 2/18/03 FC999NY_NA5HLL_88C.ENG Connecting 3:29 PM Page 4 to a television and satellite receiver The information given here refers to the two most common forms of connection. Make sure that all the appliances unplugged from the mains power, before making any connections to avoid causing damage to your equipment. Using a SCART cable to connect your appliances will give you the best sound and picture quality. are 4 Connection Tune guide (not supplied) Television (not supplied) connected to the AERIAL socket on If you are using the coaxial cable a connection needs to be made from Television and tune it to the Video the RF.OUT socket your Video Recorder to the aerial socket on Please consult your Television User Guide for information on how to do your television. this. SCART socket If you have trouble attaining a good picture it may be that the output frequency of the Video Recorder (UHF 60) is already in use by your television. To change this: If you have connection a on SCART socket on your television you can connect the television's SCART Video Recorder socket to the EURO AV 1 socket Coaxial : LV3398/LV2288/LV2378 has no (LV3799/LV3798/LV2778 Only) (For Hi-Fi) screen. cable Your Satellite Receiver should attach using a SCART cable to the EURO AV 2 socket use either Coaxial connection a or a SCART connection sockets blue Press POWER You should SCART bright Control to put the Video Recorder on standby then press and hold PROG. on of the Video Recorder. Audio sockets a Satellite receiver AV2 socket. RF out signal, SCART the EURO Aerial IN on Recorder the back of the Video Recorder. cable Note the AV channel of your television. If you are using a Coaxial cable you need to select a TV channel on your Coaxial cable (not supplied) video channel Your outside aerial should be of your Video Recorder. Satellite receiver a If you are using a SCART connection then the video picture will be shown Roof aerial Roof aerial between your Video Recorder and Television. the back 3 on the Remote or4onthefrontofyourVCRfor more than 4 seconds. RF CHANNEL 60 will appear on your television screen. Press PROG. 3 or 4 on the Video Recorder to select another frequency channel. Select any number between 22 and 68. Tune as normal. You can also set it to "OFF" if there is any interference when your TV is connected to the VCR with a SCART cable. FC999NY_NA5HLL_88C.ENG Tuning 2/18/03 3:29 PM Page 5 in TV stations The first time you use your VCR you will see ACMS (Automatic Channel Memory System) displayed on the screen. This system automatically tunes and stores TV channels. If you want to return to ACMS after your initial set up, access it via the menu. 5 Check that the channels Using ACMS 1 correspond Press the POWER Button to your Video Recorder. 2 Select the video channel you have tuned on your television, refer to turn on your TV user guide if necessary. The ACMS menu screen will Changing the order of the to store the Changing the order of You will find it useful to have a current television programme to hand Deleting during this 1 settings. Press to menu. Use 1 access or the main again. or 4 buttons to select the programme number that you wish to move. Then press 2. D/K). or 4 until you reach the you wish to store the channel in. 5 Press OK. The programme will move to the new position. 6 Press to leave the menu. I/I To move other programs repeat the above process. 3 Press OK to start the automatic Deleting tuning process. 4 When the ACMS has finished screen showing positions they have displayed. been placed the television stations a all the channels 1 that have been found and the will be The in a short while the remaining stations automatically. 5 Press are Press to access the main menu. 2Use1or2toselectPRSET then press OK. to remove the menu. If you wish to delete further stations repeat the above process. 2 to select PR position ACMS 1, after selected station will be deleted. resorted 4 Press 3 B/G 4 Press guide operation. 3 Use either the 3 ACMS thenuse3or4to select the programme number you wish to delete. SET then press OK. desired TV system according to the area you live in Pr-12 3Press the television stations 2 Press a I/I and See television stations and the television stations. /LV2378Only:Use1or2to (B/G, positions in them. If they are which you want not in the order that you would like they can be moved or deleted. 6 Press appear. LV3598/LV3398/LV2288/LV2578 select to the Selecting 1 Turn ACMS your television and your Video Recorder and select the on video channel 2 Press menu. to on your television. access Press 1 or the main 2 to select ACMS, and then OK. 3 Follow the instructions in ACMS, page. at the beginning Using of this 2/18/03 FC999NY_NA5HLL_88C.ENG and Tuning 3:29 PM 6 Page TV stations adjusting manually You may prefer to tune your television manually. Manual tuning can be more effective if the television signal in your weak for the ACMS to work properly. You can also fine tune your channels and customise the channel names. Manual 1 Turn 7 Select the CH section (if not already selected) by using the tuning 14 Press OK. 1 your television and your Video Recorder. Select the video 2 buttons and then press AV to select C (Standard stations) or channel S on on to press your television and access SET then press OK. 3 Press again or 4 buttons to select the programme number you want to tune then press OK. 5 LV3598/LV3398/LV2288/LV2578/ LV2378 use 3 Only or 4 Press OK : to select system according live in (B/G, PR I/I and CH MFT 06C-- -- through the channel numbers to find the required 9 The station and the television station table will then appear. 4 Use the 3 a to the again and be fine tuned to remove the new station has now been the 1 To or 4 or 2 buttons. Use the 3 buttons to adjust 10 Select STATION can then name the picture. by pressing 2 you your station. 11 Press OK. move the to it's correct manually tuned channel position see Changing the order of the television stations on page 5. If it is necessary for you to tune all the television stations manually you may find it easier if you write the CH numbers down for each station as you STATION 17 The If you wish to manually tune other channels you should repeat the above procedure. can PR CH MFT 06 C40 00 STATION you find them. You can then select each channel from the main menu and type the CH numbers in directly. Each cha nnel will then be in the PSET R ----- or 4 to select letters and numbers for the name 6 LV3598/LV3398/LV2288/LV2578 : to stored into your Video Recorder. D/K). PSET R Only again improve picture quality. Select MFT (Manual Fine Tuning) using 12 Use the 3 /LV2378 16 Press station. desired TV area placement . 8Usethe3or4buttonstomove 2 to select PR or (Cable stations). press menu. the main menu. 2 Press either 1 15 To confirm the station or Press OK. up to 13 Press 1 or a new station maximum of 5. 2 to the characters. move between position change them there is correct so to later. no need area is too 2/18/03 FC999NY_NA5HLL_88C.ENG Operating 3:29 PM Page 7 your Video Recorder The main functions of your Video Recorder can be operated using either the Remote Control or front control panel on the Video Recorder. Before starting, you should ensure that your television and your Video Recorder have been plugged in and switched on and that the video channel Playing a display depending PLAY and SP on screen Play specific on the tape play rapidly forwards or backwards. The picture will be whether the recorded tape is Standard a the tape. PressREW5orFF6tomake position LP or your television is selected. backward to look for video tape Press PLAY B. The television will on or shown at seven times normal play Below is 1 Auto Fast Forward/ Rewind 2 2 been removed. Press numbered 0 on tracking back on again. Simply press STOP 9 to halt play. The Video Recorder will video cassette is press either 5 for rewind or 6 for fast forward. Whilst you are rewinding forwarding you can view the section you are passing. Press and hold (for a few seconds) either REW 5 or FF 6. Releasing the FF 6 or fast button or REW 5 button will return or fast forward operation. video revert /LV2788/LV2778/LV3598 /LV2578 Picture Search a play rewind at the tape must not mode. Press STOP 9 then Playback, Shuttle (LV3799/LV3798 to television mode. can be in or speed, Slow Motion Stopping play While maximum the Video Recorder to normal rewind the remote control to switch automatic To fast forward playing search the tape forward and you Only) Using the 1 or 2 buttons it is possible to adjust playback speed during playing back or still picture. = slow speeds are play = play backwards Reverse play 3x speed five times Reverse play 7x speed once 2x forward play twice 7x forward play = order to avoid the tape or = (LV3799/LV3798 /LV2788 /LV2778/LV3598/LV2578 Only) = = 1 To switch off the slow motion and shuttle, press the desired function. During slow motion and shuttle, the noise bars may appear on the picture according tape. If distortions picture, to the status of can be seen reduce them with 3 Pausing a in the 4. or some interference in the form of black and white horizontal lines. This perfectly normal and does not that the video tape Recorder are damaged. mean or Video P/STILL ; automatically stop playing in picture repeatedly by will frame frame. 2Youcanusethe3 or4buttons to reduce any vertical movement seen on the still picture. 3 Press PLAY B to continue play from pause. the Video tape Press EJECT / to remove the video cassette from your Video Recorder. If the end of the tape is reached, your Video Recorder will automatically stop, rewind, eject the tape and place itself into Standby mode. The tape can be paused for up to five minutes. The Video Recorder will then Pressing advance the Removing tape Pressing P/STILL ; will pause play, giving you a still picture on the screen. This picture may display is damaging your Video Recorder. Frame Advance still 1 four times 1 automatically adjust the tracking to give you the best picture quality. A.TRACKING will be displayed on screen while this function is in operation. If the quality of the recording is poor, repeatedly press 4 or 3 on the remote control to manually adjust the tracking until any distortions have = 1 three times speed. Your Video Recorder will onec 1 twice Long Play. tracking list of what a accessible and how to reach them. 2/18/03 FC999NY_NA5HLL_88C.ENG from Recording three methods of There For all 3:29 recording 8 Page television programs Instant Timer recording, are PM methods you should ensure Recording (ITR), the television channels Timer Recording and ShowView tuned and stored are (LV3799/LV2778 Only). correctly and that the clock is set to the correct time. Recording from SCART Instant Timer If you wish to record directly from the SCART socket at the back of your begins recording immediately, either for a set period of time or until Video Recorder, connect the device you wish to record from using a the tape SCART lead and press AV to picture from the device. display the Long Play/Standard Play Your Video Recorder has a Long Play feature. This means you record twice the amount of (LP) information on example three hour (E180) tape you would be able to record six hours worth of programmes. With Long Play picture and playback quality are slightly from that of standard play. sound Play (SP). SP or LP displayed your television screen to let you know which has been selected. on To set the length want to record the Video Recorder. Select the The television video channel Each on your television. 2 Use the PROG. 3 or 4 buttons to select which programme you wish currently selected to record. The time minutes to a maximum of nine hours. while a to the video To view one channel whilst another, press TV/VCR VCR tape your Video Recorder. on the to recording disappear Display panel. Finishing RECORD SP a recording 0H30 1 Press STOP 9. 2 Press EJECT /. EJECT will appear on the television screen. If the end of the tape is reached You can also interrupt recording to scenes. If you press P/STILL ; during ITR the Video Recorder will enter the RECORD displayed screen your TV remote, switch to the channel you want to watch. recording. SP for up to five Using begin On the first press RECORD SP will appear on the television screen. the television prevent damage or will show 0H30. by thirty paused your Video Recorder will automatically cancel recording to subsequent press of the REC/ITR 0 button will increase the recording be tape is paused. After five minutes REC/ITR 0 button twice. programme number using the Remote Control number buttons. 3 Press REC/ITR 0 to on of time which you screen can minutes. RECP will be for, press the avoid unwanted Press the LP button if you wish to to Long Play, press it again to select Standard out. on reduced change will be runs your Video Recorder and television. Insert a video tape into Turn Tapes recording until the end of the tape is reached or it is manually stopped. ITR 1 It will continue screen. each recordable video on a recording. programme will be displayed on You can also select the can tape. For The Video Recorder will start Recording record pause mode and the set period of time is cancelled. 1 To pause recording press P/STILL ;. 2 Press P/STILL ; recording. again to continue your VCR will automatically stop recording, rewind, stop and eject the tape and place itself into Standby. 2/18/03 FC999NY_NA5HLL_88C.ENG Recording using 3:29 PM Timer 9 Page Recording Allows you to specify a time at which the Video Recorder will start recording. This can be done up to one month in advance with up to seven recordings being Ensure the television channels have been tuned and stored pre-programmed. correctly and that the clock is set to the correct time. 9 Timer Insert 1 Recording video tape. Press for the main a menu. 2Use1or2toselectREC. 3 Press OK. Press OK again enter the timer record PR DATE :: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ menu. -- -- using the 3 can -- -- -- -- -- PR SP PR-01 SP buttons or you RCA socket programme that you wish to record. Press OK before entering one of the automated features. They are DLY (daily) VPS/PDC is DATE TIME 26 1000 :: 11 00 SP :: SP ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- to record Only : Press 2 to SP SP SP SP Check the details SP Use3 or on. A move to VPS/PDC is recording screen. symbol the television PR will appear when on screen If you are from stations that do not on. transmit VPS/PDC, switch VPS/PDC off. 8 Press 2 to select the DATE TIME 26 1000 :: 11 00 SP :: SP PR-01 to ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- the television recording speed. Usethe3or4tomoveamong SP SP SP SP SP i Press 1 to delete or OK to edit that and reenter it. If you want to enter more Timer recordings, entry. repeat the above process from section you wish to change and the 3 or 4 buttons to change those sections. screen switch VPS/PDC off or 4 on a to change. your settings. If PLEASE CHECK is displayed you have entered incorrect information. the next section, VPS/PDC: OFF will be displayed at the bottom of the television change or 4 save i 7 LV3799 event press 3 select the timer slot that you wish to (LV3799 Only : IP applicable when on.) correct, if they are, press timer events If you wish at any time to 9 Check that the timer event details options 5 Press 2 and enter the date of the date to select 24 hour clock. programme. mode is not are (LV3799/LV3798/LV2778 /LV3598/ LV2578/LV3398 Only) press AV. a 2 to select, or SP numbers remember to put 0 first. If you wish to record from the or recording time every same SP directly. selecting single digit SCART socket much tape is left and switches speed from SP to LP, if necessary, to complete recording the a SP enter the numbers When to record at the SP the available or 4 Changing of the programme that you wish to record. The Video Recorder uses SP 4 To enter the programme number that you wish to record you can through Play, Intelligent Play and Long Play. IP (Intelligent Play) determines how then press OK to confirm. 6 Enter the time of the start and end i scroll Standard week. Press 1 to TIME -- -- day except Saturday and Sunday at the set time, or individual days e.g. MO (Monday) every point the 3. Press again to remove Use the 1 or 2 buttons to select the menu. 10 Place the Video Recorder standby by pressing button on on the POWER the remote control. TIMER will appear in the Video Changes Recorder LV3799 display to show that it is set to record. The Video Recorder is now set to record at the time you have specified. to programmes Only : The VPS/PDC broadcast by television companies also contains information regarding programme times which your Video Recorder can use to adjust the start and end times of for instance a a recording event, programme overruns. if FC999NY_NA5HLL_88C.ENG 2/18/03 Recording using 3:29 PM 10 Page ShowView (LV3799/LV2778 Only) ShowView simplifies the process of recording television programmes. It works by entering codes that contain all the necessary information for recording. These are called ShowView Codes and can be found in most television listings magazines. You must tune and store channels as set out on page 5 and set the clock to the correct time before using ShowView. ShowView is a registered trademark of Gemstar Development Corporation. The ShowView system is manufactured under licence from Gemstar Development Corporation. 10 television programme you wish to record. If you make a mistake ShowView ShowView will work if all the only channels have been tuned and stored. The clock must also be set to the correct 1 Turn time, see page 11. your Video Recorder and your television. Insert a recordable video tape. on 2 Press the SHOWVIEW button on press the 1 button and re-enter the correct numbers. 5 Press OK and the details of your programme will be displayed. If PLEASE CHECK is displayed If the number has been entered but does not work, it may have been printed incorrectly in the television listings guide. --------- ONCE 0~9, the or 4 OKi recording type: ONCE will be a single recording event. DAILY will record each week at the same day time. WEEKLY will record channel at the same on the time each week. 4 Use the numbered buttons to enter the ShowView Code of the Protect your described on page 8. IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording programme. LV3799 Only applicable : To stop a recording you have made being recorded over, break off the the protection IP mode is not when VPS/PDC is 8 Check the details are on. correct and check that the details are from. This will recordings repeat steps 2-7. Press again to remove the displayed on the "PR" you only happen once once done it will be stored in the Video Recorder's memory. If you wish to record from the scart socket or RCA socket press AV. 6 LV3799 move off a : Use the 2 button to to the VPS/PDC section. or 4 to switch VPS/PDC If you are recording from television station which does not or on. correct. If you wish to set other ShowView menu. 9 Turn off the Video Recorder, TIMER will be illuminated on the Display panel. Only recordings as will have to enter the programme number that you want to record is Use 3 same Play, Play, settings. displayed '- -' for each channel, buttons to select choose among Standard Intelligent Play and Long to save your press If PLEASE CHECK is If 3 Use the 3 check that you have right ShowView Code. entered the correctly the Remote Control. REC SHOWVIEW recording 7Usethe3 or4buttonsto tab on the of the rear video tape. To record on a tape that has had its protection strip removed, cover the hole with adhesive tape. Recording tape You will need a to tape second Video Recorder for tape to tape copying. using a SCART cable from Connect the back of your Video Recorder or using the AV sockets on the front (LV3799/LV3798/LV2778/LV3598 /LV2578/LV3398 Only). Select audio/video mode recording Video pressing the AV on the Recorder by button the on Remote Control. To monitor the recording, connect the recording should be turned off. Use the 2 Video Recorder to your TV using the standard coaxial aerial cable button to recording. broadcast VPS/PDC this the speed move to the section. option selecting 2/18/03 FC999NY_NA5HLL_88C.ENG 3:29 Advanced functions Your Video recorder has some (Commercial Message) Skip Press 11 Page your Video Recorder on advanced 1 CM PM operations with features you may find useful. to enter the main 1 menu. control, during play. subsequent press of the 4Use1or2toselecttheRF button 5 Use 3 AUDIO. (180 seconds). After the chosen has passed normal play will automatically resume. This enhances the time Picture picture 3 Use the 3 or 4 OFF, SOFT 4 Press or buttons to select or 4 to select the channel of audio output TV type. according to your - picture needs adjusting you can manually change the OPR setting. You can only set OPR when a tape is playing in the Video recorder. Your Video Recorder uses been entered. If you make a mistake use 1 or 2 to select the dual to enter the main or menu. 2 to select SYSTEM then press OK. 3 Use 3 or 4 --- . day of the week will appear automatically once the date has System automatically, however if you experience problems you may need to do it manually. 2 Use 1 -- -- The During play your Video Recorder should select the Colour Press -- TIME DATE menus. Colour standards 1 - SHARP. to exit the item and re-enter the details. SECAM D/K. from the HHMMDDMMYY :. colour standards, PAL B/G and video tape by adjusting to the condition of the video tape. If you feel that the the MONTH and YEAR. the increases the amount of the tape which is skipped by 30 seconds, up to a total of three minutes (Optimum Response) on HOURS, MINUTES, DAY, remote OPR menu. 2 buttons to select remote control to enter the the commercial messages, television adverts or film trailers. Each or 2 Use the numbered buttons This enables you to skip past small sections of the video tape, such as on to enter the main TIME DATE then press OK. press OK. Press the CM SKIP button Press Use the 1 2Use1or2toselectOPRthen to select the colour system used in your recording. 6 Press to exit the Setting the clock The Video Recorder clock, so menus. that for uses a example represented as 13:00. Single digit numbers should entered with instance, 01. a 24 hour 1 pm is 0 in front for be 3 Once you store your are satisfied press settings. to 2/18/03 FC999NY_NA5HLL_88C.ENG 3:29 Advanced functions Your Video recorder has On some can current display remaining, day, 1 month and year, day operational mode of your Video Recorder on your television screen. If a recording is taking place, the on screen to remove all screen. displays will not be recorded onto tape. Press OK to show the OSD. Press to enter the main 2 Select fOSD ON OFF to save 1 or or the setting. Save on through repeatedly to cycle display options. To turn off The tape counter and amount of tape left will appear if there is a tape loaded. 3 After 3 seconds the OSD will clear clock or majority of leaving only the tape counter and the tape left on the amount of television screen. the ? future the Control Panel. Display Panel Energy Save. ) on the Remote Control the Control Panel. can Recorder can or again on the Remote on the that your Video only be operated using Wide Screen so the Remote Control. 1 appear on the television screen. To unlock the Child Lock press the Control. turn off the buttons Control Panel Press the C.LOCK button on the Remote Control. SAFE will appear the television screen. on None of the buttons Press the POWER button (or reset If any other buttons on the front of the VCR are pressed, SAFE will C.LOCK button You a will be off. the 0:00:00, the point where you Video Recorder to record Press displays the play elapsed in hours the counter. Child Lock All indicators in the SAFE minutes and seconds. Press CLEAR This feature allows you to conserve energy. If you have programmed the ? digital When you press STOP 9 and press REW 5, the Video Recorder will stop 4. television programme this feature will not work. 2 Press OK The tape counter or recording time at Energy the counter to reset the counter to 0:00:00. 2 then press OK. 3 Select OFF using 3 Press menu. using Resetting tape displays on screen completely. the time, tape counter, tape of week, channel and 1 again To turn off the be used to with features you may find useful. operations OSD's from the television (OSD) This your Video Recorder on advanced 12 Page 4 Press OK display screen PM on the Control Panel will work apart from STOP 9 and EJECT /. For wide screen playback your Video Recorder must be connected to your television using a SCART cable. 1 Press to enter the main 2 Use the 1 or menu. 2 buttons to select 16:9/4:3 and press OK. 2/18/03 FC999NY_NA5HLL_88C.ENG 3:29 Advanced functions Your Video recorder has 3 Use the 3 AUTO: or 4 some buttons. Choose: automatically chooses the Page on advanced 13 your Video Recorder operations with features you may find useful. function to operate automatically AUTO or to turn it off, OFF. 3 The Video Recorder will then play the selected section twice. HEAD STATUS PLEASE CLEAN: The tape heads correct format for the content. need 4:3: for TAPE STATUS playing back and recording in normal format. 16:9: for playing back and recording in Wide Screen format. 4 Press to save your settings. Sound settings (LV3799/LV3798/LV2788 /LV2778 Only) Your Video Recorder play can record and back stereo sound. You select the way sound is 1 PM Press to access can played the main 2 Select AUDIO with the 1 or back. menu. 2 Automatic power off By pressing the POWER button rewinding a tape the Video Recorder will turn off automatically when the tape rewind has completed. ez Press the button marked can tape to STEREO play. select a 1 PR-01 26 10:00-11:00 SP Shows the current status of timer 1 Press to access the main or menu. 2 buttons. 3 Press OK. resume VIDEO DOCTOR REPEAT NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME button. The Video Recorder will MONO automatically menu. menu ez the to set your Video Recorder's NICAM ez rewind for as long as OK REPEAT button is held. 2 Release the button when you want the replay to begin. the number of timer of aspects of the Video Recorder. HEAD STATUS Press and hold the 2Shows NEXT TIMER PROGRAMME section of the video repeat twice and then NO. OF TIMER PROGRAMME The Video Doctor will show the status 2 Select Dr. with the 1 standby. tabs tape suitable for recording programmed. TAPE STATUS RIGHT Select NIC in the main from any REPEAT play Repeat You to exit the normal POWER tape. choose between: 5 Press ez during play. The Video Recorder will automatically stop the tape, rewind to the beginning and eject the 4Usethe3 or4buttonsto resume Video Doctor OFF a recording. 4 To position, press the ez button during the first repeat. Power Off protection removed, insert Operations ez ez (left channel only) (right channel only) has had its while 3 Press OK. LEFT NOT RECORDABLE: The SP Cassette in the Video Recorder It will then turn itself to buttons. EZ REPEAT cleaning. 4 Use the 3 the or 4 following buttons to check features. recording. 5 Press to remove the television the screen. menu from FC999NY_NA5HLL_88C.ENG 2/18/03 3:29 Advanced functions Your Video recorder has Language It is possible that the to some selection change the language displays are on screen shown in. You can choose between English, Russian, Deutsch, Francais, Polski, aesky and Magyar. 1 Press display the main menu. using the 1 or 2 to 2 Select ABC buttons. 3 Press OK to reveal the choice language screen. Select your desired language using the 3 or 4 buttons. 4 Press to store the settings. PM on advanced Page 14 your Video Recorder operations with features you may find useful. 2/18/03 FC999NY_NA5HLL_88C.ENG 3:29 PM 15 Page Troubleshooting If you No ? are having trouble with your Video Recorder picture and has been switched on in and plugged at a mains wall plugged in and switched on. Check the aerial lead is TV programmes cannot be recorded in both the television and the Check the reception on your television set. If you cannot receive a picture through your aerial, the Video Recorder. Video Recorder will be unable to undamaged and securely ? connected to the correct sockets ? ? Check that you have tuned into a video channel on your television. If you are using a ? is secure and that the correct AV channel is selected on ? television. ? No playback picture ? or a cassette to poor Try a different video cassette. If the problem is resolved, the problem ? Try using or 4 the tracking buttons 3 to reduce the amount of If the cassette contains recording that you have Check that the received by reasonable ? into the ? the television is cannot be a cassette already. the horizontal control and securely Ensure that the television has been correctly Recorder. in stereo. on your television. LV2788/LV2778 ? In the Audio STEREO menu option Only) check that the has been selected. connected to the correct sockets. Check that there is not was menu. to check that (LV3799/LV3798/ picture Check the aerial lead is undamaged guide NoHi-Fisound ? on quality. in the Video Recorder Try adjusting TV a Check your television user guide to see if you have a NICAM stereo feature your television, you should consult your television user guide on how to do this. signal being tape The video cassette may be damaged. Insert another video Consult the broadcast ? from it. ? ? recently correctly cassette and check the safety tab recording has ? A video a in and switched on? Check that the batteries have The top of the video picture is unstable inserted visible interference. ? ? Only) Check that AUTO has been selected in the NICAM Has the Video Recorder been plugged if the see used to prevent been removed. may have been the cassette itself. ? programmes properly. Check the rear of the video ? ? ? securely Check that the Video Recorder being recorded (LV3799/LV3798/ does not work Remote Control. and NICAM sound is not LV2788/LV2778 The Remote Control been inserted has been tuned to the television your Recorder. record television broadcasts. connected to the correct sockets. connection, check that the cable Is the video cassette the right way round? The windows should be at Check the aerial lead is undamaged SCART your service centre. the top and the arrow should be pointing toward the Video correctly. socket and that the television has been ? television channels may not be tuned to the Video Recorder Check that the Video Recorder plug ? made from the television, the sound no please check the following before calling tuned to your Video Check your television user guide see if you have a stereo feature to on your television. Autoplay does ? If the safety not work tab has not been removed from the video cassette this function will not work. FC999NY_NA5HLL_88C.ENG 2/18/03 3:29 PM Page Technical specifications Specifications correct at time of are at any time without printing. LG is 16 constantly innovating and products may warning. Specifications General Power Power consumption Video Head System Tape speed Tape Format Max. recording time Rewind time Dimensions Weight Operating temperature Operating humidity Timer Video Television 110-240V~,50/60Hz 12 Watts (Energy Saving mode: 3 Watts) Double azimuth 4 heads, helical scanning (LV3799/LV3798/LV2788/LV2778/LV3598/LV2578/LV2578) Rotary 2 heads, helical scanning (LV3398/LV2288/LV2378) 23.39 mm/sec (SP mode) 11.69 mm/sec (LP mode) Tape width 12.7mm (0.5 inch) 4 hours (SP mode, E-240 Tape) 8 hours (LP mode, E-240 Tape) Approx. Approx. 65 (±10) secs (E-180 tape) (LV3799/LV3798/LV2778/LV3598/LV3398/LV2578/LV2378) Approx. 180 (±30) secs (E-180 tape) (LV2788/LV2288) 360x94x272mm(WxHxD) 3.4 kg 5ºC-35ºC Less than 80% 24 hours display type Recording RF reception CCIR standard (625 lines, 50 PAL/SECAM colour signal PAL/MESECAM PAL SECAM (B/G, D/K) RF OUT Input level Output level Signal to noise ratio PAL K/G/I VIDEO IN (SCART, RCA) 1.0 Vp-p, 75 Ohm unbalanced VIDEO OUT (SCART) 1.0 Vp-p, 75 Ohm unbalanced More than 43 dBm system format RF modulator Audio Input level UHF channels 22-68 fields) (adjustable) AUDIO IN (SCART, RCA) SCART: 6.0 dBm, more than 10 kohms - RCA: 6.0 dBm, more than 47 kohms AUDIO OUT (SCART, RCA) SCART: 6.0 dBm, less than 1 kohms RCA: 6.0 dBm, less than 1 kohms - Output level - - Track Frequency Signal to Dynamic response noise ratio range Mono track & Hi Normal : 100 Hz - Fi Track 10 kHz (-6/+3 dBm) Hi-Fi:20Hz-20kHz(-3/+3dBm) Hi-Fi : More than 70 dB (JIS A filter) Hi-Fi : More than 85 dB (JIS A filter) - change FC999NY_NA5HLL_88C.ENG 2/18/03 3:29 PM Page 17 Model No. FC999NY/FC991NY/FD941NY/FC934NY/FC491Y/ FC431Y/FC290Y/FD240Y/FC230Y Part No. 3834RP0088C
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement