LG RD19GQGC1 Owner’s Manual

1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 1
ENGLISH
中文
OWNER’S MANUAL
DEHUMIDIFIER
Please read this manual carefully before operating your set and retain it for future
reference.
RD19GQGC1 / RD16GQSC1
P/NO : MFL68026021
Rev04_020218
www.lg.com
Copyright © 2017 - 2018 LG Electronics Inc. All Rights Reserved.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 2
2
SAFETY PRECAUTIONS
ENGLISH
SAFETY PRECAUTIONS
The following safety precautions are intended to prevent accidental property damage and personal injury through safe and correct use of the product.
! WARNING
Failure to follow the instructions could result in death or serious injury of the user.
! CAUTION
Failure to follow the instructions could result in personal injury or property damage.
! WARNING
When installing the dehumidifier
• Do not damage, alter, excessively bend, twist, pull, pinch or heat the power cord.
If the power cord is damaged, request for repair to the service technician to prevent any risk.
If not, it can cause fire, electric chock or product failure.
• Do not use multiple-outlet adaptors with this dehumidifier.
Excessive use of power could result in electric shock or fire.
• Do not use the product if the outlet is damaged or loose.
Doing so could result in electric shock or fire.
• If there is a gas leak, open the window for ventilation before using the dehumidifier.
Failure to do this could result in explosion, fire or burns.
• Do not disassemble, repair or modify the product.
Doing so could result in fire or electric shock.
• Do not store or use flammable gases or materials near the dehumidifier.
Doing so could result in fire or product malfunction.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
When using the dehumidifier
• Push the power plug all the way into the wall outlet so that it is not loose.
A loose connection could result in fire.
• Do not touch the power plug with wet hands.
Doing so could result in electric shock or injury.
• Do not modify or extend the power cord.
Doing so could result in fire or electric shock.
• If the product makes a strange noise or emits a smell or smoke, pull the power plug out
and contact the service center.
Failure to do this could result in explosion, fire or burns.
• Avoid placing the dehumidifier or other heavy objects on top of the power cord.
Doing so could result in fire or electric shock.
• Do not use water to clean the dehumidifier.
Doing so could result in electric shock or malfunction.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 3
SAFETY PRECAUTIONS
3
! CAUTION
When installing the dehumidifier
• Do not use the product for purposes other than its intended use.
This product is not designed for preserving precision instruments, tableware or art works. The
quality of the items you are trying to preserve could deteriorate.
• Ventilate frequently.
Keep the area well ventilated, especially if you are using a combustion appliance as well. Inadequate ventilation reduces the oxygen level in the air.
• Always hold the plug head when pulling the power plug.
Failure to do so could result in electric shock or injury.
• Do not use excessive force when pulling the extension hose.
Doing so could result in damage to or deformation of the hose.
• Do not use the product in places where chemicals are used.
Chemicals and solvents dissolved in the air in places such as hospitals, factories, laboratories
and hair salons could cause the product to become deformed, causing the dehumidified water
to leak and wet nearby household items, equipment etc.
• Turn off the dehumidifier and pull out the power plug before cleaning.
If you do not do this, you could be injured by the high-speed fan.
• DO NOT operate the dehumidifier without a filter.
Using the product without a filter could result in a reduced product lifespan, electric shock or injury.
When using the dehumidifier
• Do not use the product for preserving animals/plants, precision instruments, art works
etc.
It may cause property damage.
• Do not place vases or water jars on the dehumidifier.
If the water flows into the dehumidifier, it could result in fire or electric shock.
• Product must be placed on safe and hard surface floor.
On weak surface floor, product is prone to vibration and noise.
Product must stand upright, otherwise it causes defect and water leakage.
ENGLISH
• Keep the air inlet and outlet free from obstructions.
Failure to do this could result in poor performance or malfunction.
• Do not cover the power cord with a mat etc.
If heavy objects are placed on the mat, the power cord underneath could be damaged, causing
fire or electric shock.
• Do not place combustion appliances directly in the path of the dehumidifier’s airway.
Doing so could result in incomplete combustion or deformation by heat.
• Keep the product away from fire.
Failure to do this could result in fire.
• Do not use the product in places where it could be splashed by water.
Doing so could result in fire or electric shock.
• Do not insert fingers, sticks etc. into the air inlet or outlet.
You could be injured by the high-speed fan.
• Only qualified personnel may clean the internal parts. Do not use corrosive detergents.
Doing so could result in product malfunction, fire or electric shock.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 4
4
SAFETY PRECAUTIONS
ENGLISH
• Turn off the dehumidifier and empty the water tank before moving the dehumidifier.
The water could overflow from the tank, wetting household items or causing fire or electric
shock.
• Pull out the power plug if you will not be using the product for an extended period.
Failure to do this could result in product malfunction or fire.
• Do not use the product in a very small space such as a closet.
Poor ventilation could result in overheating or fire.
• Do not use wax, thinner or a strong detergent when cleaning. Wipe the product using a
soft cloth.
Using inappropriate cleaning products could cause the product to become discolored or develop surface flaws.
• Do not use the product in direct sunlight or rain.
The product could overheat, causing fire or electric shock.
• Do not touch the product with wet hands.
Doing so could result in electric shock. Position the product on a firm, stable surface.
• If the product is on an unstable surface, it may vibrate and make noise.
If the product is tilted or laid down, the dehumidified water could overflow and the product
could malfunction.
• Do not keep the power cord tied up when using the product.
The power cord could overheat, resulting in fire.
• Do not spray foreign substances or water into the sensor hole.
This could result in electric shock or malfunction.
• Do not use the product at unstable voltage for a long period of time.
The product may stop automatically to protect itself. This could result in electric shock or malfunction.
• Do not allow child to mount on the product.
It may cause serious injury and also product defect.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 5
TABLE OF CONTENTS
2
6
7
SAFETY PRECAUTIONS
QUICK START
NAME OF EACH PART
7
7
8
Front side
Back side
Display Panel
9
CHECKLIST BEFORE
USAGE
10 HOW TO USE
11
12
12
13
14
15
15
15
16
17
17
18
19
20
Smart Dehumidification
Jet Dehumidification
Silent Dehumidification
Spot Drying
Laundry Drying
Ionizer
Defrost Operation
Auto Clean
Bucket full
OFF Timer
Timer function
Lock Function
How to empty water tank
Product registration through Wi-Fi function
21 SMART FUNCTIONS
21
Using Smart ThinQ Application
23 HOW TO CLEAN
23
23
24
How to clean the exterior and inlet of
the dehumidifier
How to clean water tank
How to clean Pre-Filter
25 HOW TO STORE
26 TROUBLESHOOTING
TIPS
27 PRODUCT SPECIFICATIONS
ENGLISH
TABLE OF CONTENTS
5
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 6
6
QUICK START
ENGLISH
QUICK START
Dehumidifier efficiency varies depending on room temperature and relative humidity.
• A lower temperature and lower relative humidity will reduce the moisture removal rate.
• The compressor operates in dehumidification mode only when the set humidity is lower than the
room humidity.
The operating temperature is 5°C to 32°C.
• The dehumidifier cannot be used at 0°C or below because the dehumidified water could freeze.
• At 32°C or higher, the dehumidifier may stop running automatically to protect itself from overheating.
The room temperature increases while the dehumidifier is
running.
• This dehumidifier does not have temperature control functions.
• The dehumidifier generates heat while operating, raising the room temperature by about 2°C or
3°C depending on the usage conditions (room air pressure and room size).
The dehumidification can be restarted after three minutes.
• If you attempt to restart the dehumidifier immediately after stopping it, the compressor will start
running again after about three minutes for product safety reasons.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 7
NAME OF EACH PART
ENGLISH
NAME OF EACH PART
Front side
Display
Start/stop button
Outlet
Louver
It adjusts
the direction
of the wind.
Water tank lid
Water tank
It stores dehumidified water.
Back side
Hose cover
Pre-Filter
Inlet
It absorbs the air and
moisture in the room.
Power plug
Wheels for moving
Power plug hanging part
h The components are at the top part of the product packaging box.
h The form of water container may differ in each product.
Extension hose
Shoes drying hose
Laundry drying hose
7
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 8
8
NAME OF EACH PART
ENGLISH
Display Panel
Buttons to turn off Wi-Fi
Start/stop
Wind strength control
Operation mode
Humidity control
Wi-Fi
indicator lamp
Humidity &Off timer
display
Ionizer
Bucker full
indicator lamp
OFF timer
Timer
indicator lamp
Start/stop button
Operation mode button
Ionizer button
Humidity control button
Wind strength control button
Buttons to turn off Wi-Fi
OFF timer button
Operation mode lamp
Humidity & Off timer display
Wi-Fi indicator lamp
Timer indicator lamp
Set indicator lamp
It is used to start and stop the product operation.
It is used to switch to Smart dehumidification mode,
Jet dehumidification mode, Silent dehumidification mode,
Spot drying mode, and Laundry drying mode.
Smart dehumidification → Jet dehumidification → Silent
dehumidification → Spot drying → Laundry drying →
Smart dehumidification
The automatic dry function will turn on/off after depressing
the button for 3 seconds or more.
It is used to remove harmful bacteria in the air. When you
press the button for 3 seconds, lock function is operated.
It controls the desired humidity. (30%~70%)
Humidity control can be set in the units of 5%.
It controls the wind strength. When you press the button
for 3 seconds, Wi-Fi pairing is operated.
Pressing and holding the Start/Stop button and the Wind
strength control button at the same time for more than 3
seconds turns off Wi-Fi.
h After finishing product registration and while Wi-Fi is off,
pressing and holding the button for more than 3 seconds
turns on Wi-Fi and you can control the product from your
smart-phone that has been previously registered.
The product will be turned off after the set time.
When the button is pressed, it is increased by 1 hour each
time, and you can set up to 8 hours.
It displays the currently set operation mode.
It displays the current humidity and set humidity. When Off
timer is set, it displays the Off timer time, and it automatically
displays the current humidity after completing the setting.
It is displayed when Wi-Fi function is set.
It is displayed when timer is set in Wi-Fi app.
It is displayed when humidity is set.
Desired humidity is displayed with "set" light, and the light
is turned off when showing current humidity.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 9
CHECKLIST BEFORE USAGE
9
Dehumidification amount changes according to indoor temperature and
relative humidity.
- If the temperature or relative humidity is low, dehumidification amount is decreased.
- Dehumidification is performed with compressor operation only when the desired humidity is
lower than the current humidity.
The product can operate in the temperature boundary of 5°C~32°C.
- At 0°C or less, dehumidified water will freeze, and dehumidification cannot be performed.
- If it is over 32°C, the temperature inside the dehumidifier will rise, and there will be cases of
stopping the operation by protective device activation to avoid excessive usage.
When the dehumidifier is under operation, the indoor temperature will rise.
- Dehumidifier does not have a cooling/heating function.
- Heat is generated during the operation, so the temperature may be increased by about 2°C~3°C
according to the usage conditions (indoor temperature, size of the room).
Operation will restart after 3 minutes.
- If it is restarted right after the stop, the compressor will start about 3 minutes after to protect the
product.
It automatically protects the product during the continuous operation.
If it is operated for 24 hours or more continuously, the compressor will stop automatically to protect the product, and it will restart after 1 hour.
Please have gap of 30cm or more from the wall.
If it is not ventilated well, the air suction performance will be degraded.
There may be water remaining in the drain water tank at the first time
usage.
There may be water remaining in the drain water tank by the product outgoing inspection to check
the normal operation of the product. It is not a failure.
ENGLISH
CHECKLIST BEFORE USAGE
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 10
10 HOW TO USE
ENGLISH
HOW TO USE
Push start/stop button.
- The louver opens and smart dehumidification starts.
But, if no other button is pressed (Mode, Speed etc.), the desired humidifity will change to 50%
after 30 minutes of continuous operation.
- The current humidity is displayed on The humidity & Off timer display.
Press operation mode button to select desired operation mode among
smart dehumidification, jet dehumidification, silent dehumidification,
spot drying, and laundry drying mode.
- The selected operation indicator lamp is lighted.
- The selected operation mode starts after 3 seconds.
Press Humidity Control ∧ /∨ button to change humidity.
- Desired humidity can be set to 30 ↔ 35 ↔ 40 ↔ 45 ↔ 50 ↔ 55 ↔ 60 ↔ 65 ↔ 70.
Humidity can be set with the units of 5%.
- During the humidity setting, desired humidity is displayed on the humidity display part, and the
current humidity is displayed after about 5 seconds.
- Current humidity is displayed in the units of 5% from 25~90%.
If it is less than 25%, it is displayed as 25%, and if it is 90% or more, it is displayed as 90%.
Press Wind Strength Control button to change wind amount.
You can set the wind amount to low or high wind.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 11
HOW TO USE 11
- Louver closes.
- All lamps will be turned off and the product stops.
! CAUTION
• If the product started again right after stopping the operation, dehumidification operation
does not start for about 3 minutes to protect the compressor.
Smart Dehumidification
To maintain pleasant indoor condition
- If you press Operation Mode button to select Smart dehumidification mode and set the desired
humidity, it maintains the humidity set by the user.
- Once the humidity level reaches the desired humidifity, the compressor stops and only the fan
operates. If relative humidifity goes up, it will operate dehumidification again.
- The wind strength is set to high wind as default, and you can set wind strength and desired humidity.
- When the current humidity reaches the desired humidity, the compressor stops, and operates in
wind only mode.
ENGLISH
To stop the product, press start/stop button one more time.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 12
12 HOW TO USE
ENGLISH
Jet Dehumidification
When you want to remove indoor moisture quickly
- Press Operation Mode button to select Jet dehumidification mode.
- Under Jet dehumification mode, it will change to Smart dehumidification mode after 60 minutes.
Even if it is under power wind (Po) operation, high wind indicator lamp is lighted.
- When it is in Jet dehumidification mode, if you select Humidity control button or Speed button, it
switches to Smart dehumidification.
- If it changes from Smart/Silent dehumidification to Jet dehumidification, the desired humidity selected in another operation mode is set.
Silent Dehumidification
When you want dehumidification in silent mode
- Press Operation Mode button to select Silent dehumidification mode.
- Silent dehumidification operation makes silent and pleasant room even during the night.
- The wind strength is set to low wind as default, and you can set wind strength and desired humidity.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 13
HOW TO USE 13
ENGLISH
Spot Drying
When you need spot drying of shoes, closet, etc.
- Press Operation Mode button to select Spot drying mode.
- In Spot drying mode, the louver is closed.
- Wind amount is set to high wind, and humidity control & the wind amount is not operational.
- The current humidity is displayed in the humidity display window.
- Use the product by connecting shoes drying / closet drying kit through the extension hose as necessary.
How to use Spot drying mode
Open the hose cover at the back of the product by turning it counterclockwise.
After inserting Spot drying extension hose, fix
it by turning it clockwise.
Extension hose
Extend the hose to make it face the desired
drying direction.
Connect shoes drying kit or closet drying kit to
the extension hose.
h The form of water container may differ in each product.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 14
14 HOW TO USE
ENGLISH
! CAUTION
• Do not move the dehumidifier by holding the extension hose. Dehumidifier may fall down
and cause injury.
• If spot drying operation is used for long period of time, the operation may stop to protect the
product.
Laundry Drying
When you want to dry laundry continously regardless of the ambient humidity
- Press Operation Mode button to select Laundry drying mode.
- The wind strength is set to high at default, and you can change the wind strength. You cannot
set desired humidity.
- Louver operates up and down.
! CAUTION
When drying laundry, be careful not to have laundry water drop on to the dehumidifier.
h The form of water container may differ in each product.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 15
HOW TO USE 15
When you want to remove harmful bacteria in the air
- Select it by pressing Ionizer button.
- It removes harmful material in the air such as bacteria, virus, etc. using ionized air.
- You can use Ionizer function and dehumidification function at the same time.
- Ionizer can be used at any time regardless of dehumidifier function.
Defrost Operation
If there is frost in the heat exchanger due to low indoor temperature, it automatically removes the frost.
- During the operation, if ‘dF’ is displayed on the display, it automatically runs the defrost in the
heat exchanger inside the product.
- Compressor is stopped during the automatic defrost operation.
Auto Clean
This function dries inside of the dehumidifer in order to prevent mold or germs.
- Press the operation mode button for about 3 seconds during operation to set up Auto Clean.
- Each time the operation mode button is pressed for 3 seconds: Auto Clean → settings cancellation - then it repeats
- When running Auto Clean a
is displayed on the display.
- After Auto Clean function finishes, the LED display automatically turns off.
- When the operation stops, the Auto Clean will start.
When Auto Clean function starts, the dehumidifier will run the fan for a certain period in order to
remove moisture inside the product. (Duration: about 5 minutes)
ENGLISH
Ionizer
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 16
16 HOW TO USE
ENGLISH
Bucket full
When the water tank is full, operation automatically stops, bucket full lamp is lighted, and
warning buzzer sounds.
(Warning buzzer will sound one more time after 1 minute.)
- When the full water is detected, the dehumidification function immediately stops, and fan operates for 5 minutes to remove the remaining condensed water.
- Bucket full lamp is lighted on the display panel, and the product operation stops.
- After draining, when you insert water tank again, bucket full lamp is turned off, and operation
starts again automatically.
! CAUTION
Cautions when you drain the water
Carefully take out the drain water tank.
If you pull the water tank too hard, the water inside may spill over.
When you take out the water tank, make sure to stop the product.
If you take out the water tank during the operation, compressor will
stop, and fan will operate for 5 minutes to vaporize the remaining
condensed water in the heat exchanger before stopping the operation.
h The form of water container may differ in each product.
! CAUTION
• Lamp will turn on if water tank is not correctly placed. Check if water tank fully and correctly
placed.
• When you move the product or shock is imposed to the product, Bucket full lamp may be
lighted.
• Drain the water inside the water tank, and reassemble the water tank.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 17
HOW TO USE 17
Check if it is under operation and press OFF timer button.
- OFF timer switches in the following order, so select the setting time.
(1 hour gap) → 1 → 2 → … → 8 → No display
- The remaining time is displayed as time goes.
- When it passes the selected time, operation stops.
To cancel OFF timer
- If you press OFF timer button repeatedly until the time display disappears in the OFF timer display part, it will be cancelled.
! CAUTION
Drain the water inside the water tank and then set the time.
If water tank becomes full during OFF timer operation, bucket full indicator lamp is lighted
and the dehumidification stops.
Timer function
Various kinds of reservation including the power on/off can be made by the Smart ThinQ
application. (Execute Smart ThinQ Application → Select the dehumidifier product → Make reservation)
* For more detailed description on the use of Smart ThinQ, refer to the Using the Smart Functions
section.
* You can set the timer time through app.
• You can set the timer function only through Smart ThinQ app.
(Run Smart ThinQ app → Select dehumidifier product → set timer time)
When timer function is set through app, the
timer set display part is lighted.
ENGLISH
OFF Timer
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 18
18 HOW TO USE
ENGLISH
Lock Function
Press the Ionizer button for 3 seconds.
- If you take off your hand when the buzzer sounds 1 time after 3 seconds, it enters Lock function.
- “CL” display in the display panel is maintained for 5 seconds.
- It maintains the operation state at the time of setting the function until the function is turned off,
and there will be no response even if a button is pressed.
- If you press other buttons in Lock function set state, warning sound is generated 3 times, and
‘CL’ display is displayed in the display panel for 5 seconds.
- You can set the function regardless of whether the product is in operation.
To unlock
- Press the Ionizer button for 3 seconds.
- After 1 buzzer sound after 3 seconds, if you take off your hand, the lock function will be turned
off.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 19
HOW TO USE 19
Hold the top handle of the water tank and
softly take it out.
Open the drain lid of the water tank.
Drain lid
Water tank
handle
First insert the bottom part of the water tank
correctly into the hole, and then push it in.
Pour out the water inside the water tank.
Water tank
handle
h The form of water container may differ in each product.
! CAUTION
• If the water tank is taken out right after stopping the operation, there are cases of water remaining in the heat exchanger dropping into the main unit. (Wipe the dropped water with
soft cloth.)
• After taking out the water tank, do not touch inside the main unit. It will cause failure of the
full water detection device.
• Periodically clean inside the water tank (about 1 time per week).
• If it is used during winter or at low temperature, there is less moisture in the air, so dehumidification amount is also decreased.
• When you take out the water tank, make sure to stop the product. If you take out during operation, the compressor will stop and the fan operates for 5 minutes to vaporize the remaining condensed water inside the heat exchanger before complete stop.
ENGLISH
How to empty water tank
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 20
20 HOW TO USE
ENGLISH
Product registration through Wi-Fi function
1. Press
button to start dehumidifier operation.
2. Check the information (Wi-Fi network name, password) of AP at the place where the dehumidifier is installed.
3. Proceed with the product registration after log-in through the smart phone’s Smart
ThinQ app.
• For Wi-Fi function registration, according to app guide, press speed button for 3 or more seconds. (For details, refer to Smart ThinQ App connection guide)
* Check if the product display’s Wi-Fi indicator lamp is blinking. To send the network information,
Wi-Fi indicator lamp blinking is maintained for about 5~10 minutes.
! CAUTION
• If the distance between dehumifier and wireless AP is long, the equipment will not work
smoothly.
• If wireless AP does not work, Smart ThinQ app related functions cannot be used.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 21
SMART FUNCTIONS 21
Using Smart ThinQ
Application
Installing Smart ThinQ
Search for the LG Smart ThinQ application
from the Google Play Store or Apple App
Store on a smart phone. Follow instructions to
download and install the application.
Product Registration
1 Run the LG Smart ThinQ application on a
smart phone.
2 Create an account and sign in.
3 Select Register.
4 Select Dehumidifier.
5 Follow the instruction on the smart phone.
Wi-Fi Function
• For appliances with the
logo
Communicate with the appliance from a smart
phone using the convenient smart features.
Using the Application
1 Select the appliance in the application and
connect it to a Wi-Fi network.
2 Select the menu on the upper right side to
access settings and features.
Firmware Update
Keep the appliance performance updated.
Smart Diagnosis™
If you use the Smart Diagnosis function, you
will be provided with the useful information
such as a correct way of using the appliance
based on the pattern of use.
Settings
Allows you to set various options on the appliance and in the application.
NOTE
• To verify the Wi-Fi connection, check that
Wi-Fi
icon on the control panel is lit.
• LG Smart ThinQ is not responsible for any
network connection problems or any faults,
malfunctions, or errors caused by network
connection.
• The machine supports 2.4 GHz Wi-Fi networks only.
• If the appliance is having trouble connecting
to the Wi-Fi network, it may be too far from
the router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal
strength.
• The Wi-Fi connection may not connect or
may be interrupted because of the home network environment.
• The network connection may not work properly depending on the internet service
provider.
• The surrounding wireless environment can
make the wireless network service run
slowly.
• The application is subject to change for appliance improvement purposes without notice
to users.
• Functions may vary by model.
ENGLISH
SMART FUNCTIONS
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 22
22 SMART FUNCTIONS
ENGLISH
Wireless LAN Module Specifications
Model
LCW-003
Frequency Range
2412 to 2472 MHz
Output Power(Max)
IEEE 802.11b:18.37 dBm
IEEE 802.11g:17.67 dBm
IEEE 802.11n:17.67 dBm
Open Source Software Notice Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping, and handling)
upon email request to opensource@lge.com.
This offer is valid for three (3) years from the
date on which you purchased the product.
Smart Diagnosis™ Using a Smart
Phone
• For appliances with the
or
logo
Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or
fails.
Smart Diagnosis™ can not be activated unless the appliance is connected to power. If
the appliance is unable to turn on, then troubleshooting must be done without using Smart
Diagnosis™.
1 Open the LG Smart ThinQ application on
the smart phone.
2 Select the Dehumidifier in dashboard.
3 Press Start Smart Diagnosis button.
4 Follow the instructions on the smart phone.
NOTE
• The Smart Diagnosis™ function depends on
the local call quality.
• If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
• Be sure to keep ambient noise to a minimum
or the phone may not correctly receive the
buzzer beeps from the indoor unit.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 23
HOW TO CLEAN 23
How to clean the exterior
and inlet of the dehumidifier
How to clean water tank
Press the fixing part on both sides of the water
tank to take out the lid.
Soak soft cloth in water, squeeze out water,
and wipe the dehumidifier.
- Do not spray water directly on the main unit.
- If you wash the main unit with water, insulation may be degraded or stain may be
formed.
Remove dust using vacuum cleaner or soft
brush.
Soft cloth
Wipe the water inside the water tank.
Do not open the lid.
There is a float to
detect full water inside.
! CAUTION
If the float is fallen off or assembled incorrectly, there may be water leakage.
h The form of water container may differ in
each product.
! CAUTION
Do not use the following material.
It may damage the exterior. (thinner, benzene, acid, sponge, etc.)
ENGLISH
HOW TO CLEAN
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 24
24 HOW TO CLEAN
ENGLISH
How to clean Pre-Filter
Push Pre-Filter to the right to take it out.
Clean the Pre-Filter with vacuum cleaner or
soft brush.
- If the contamination is severe, wash with
water using neutral detergent.
(Do not use hot water of 40°C or higher.)
- The cleaning period for Pre-Filter is 1 month.
Completely dry in shade and push to the left
until the Pre-Filter is not pushed any more.
h The form of water container may differ in each product.
! CAUTION
• For the safety, pull out the power plug before cleaning.
• After washing the Pre-Filter with water, completely dry it in shadow.
(If there is moisture, it may cause failure.)
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 25
HOW TO STORE 25
Pull out the power plug from the socket.
Completely drain the water remaining inside the water tank.
- Separate the water tank lid and wipe the water inside the water tank.
Clean the filter.
- If it is dried under sunlight, it may be deformed.
- During the drying, avoid fire or direct sunlight, but dry in shadow.
After drying at a place without direct sunlight and with good ventilation
for about half a day, make sure to store with covering it up and have it
stand straight up to prevent dust entering.
(A separate cover for product storage is not provided.)
h The form of water container may differ in each product.
ENGLISH
HOW TO STORE
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 26
26 TROUBLESHOOTING TIPS
ENGLISH
TROUBLESHOOTING TIPS
Is there something wrong with the product? Please check the following before contacting the
service center.
Problem
Check
The product is not
running.
- Is the power plug correctly inserted into
the wall outlet?
- Are you experiencing a power outage?
- Is the water tank correctly installed?
- Is the Tank Full indicator lit?
- Is the display showing dF?
- Is the set humidity set higher than the
room humidity?
There is little dehu- - Is the dehumidifier running in Ionizer?
midification.
- Is the room temperature or humidity
too low?
- Is the air inlet or outlet blocked?
Humidity does not
seem to decrease
much even though
the product is running in dehumidification mode.
- Is the door/window open?
- Is the room too big?
- Is there an object generating steam
nearby?
The humidity read- - Is the dehumidifier obstructed in any
ing on the display is way?
incorrect.
- Is the dehumidifier far away from the
place you are trying to dehumidify?
What To Do
- Insert the power plug.
- Check other appliances.
- Install the water tank correctly.
- Empty the water tank.
- Press the Start button when Auto Defrost ends.
- Reduce the set humidity to below the
room humidity.
- Select Auto Dehumidifying / Laundry
Drying mode.
- Check the target humidity.
- Use Laundry Drying mode.
- It is normal for less dehumidification to
take place in the winter and in dry areas.
- Remove the obstruction.
- Clean the filter.
-Close the door/window.
- Use the dehumidifier in an adequately
sized room.
- Do not use the dehumidifier together
with other appliances.
- Keep the dehumidifier away from walls
etc.
- The dehumidifier’s display shows the
humidity level in its current position,
which may be different from the level in
other positions.
It is taking a long
- Is the dry air reaching the laundry?
- Move the dehumidifier closer to the
time to dry laundry.
laundry.
- Are you trying to dry the laundry in a large - Use the dehumidifier in an adequately
room?
sized room.
- Are you trying to dry too much laundry? - Reduce the amount of laundry.
I just removed the
water tank and
water is dripping
from within the dehumidifier.
- Did you remove the water tank while the
dehumidifier was running?
Call the service immediately in the following situations
1. Power cord is too hot or damaged.
2. Error code is generated by self diagnosis.
3. Water overflow even if the water tank is full.
- Remove the water tank when the Tank
Full indicator is lit.
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 27
PRODUCT SPECIFICATIONS 27
ENGLISH
PRODUCT SPECIFICATIONS
Height
Height
Depth
Width
Width
Depth
The exterior and design as well as the product specifications may change to enhance the quality
of the product.
Model
RD16GQSC1
RD19GQGC1
Power
AC 220~240V, 50 Hz
AC 220~240V, 50 Hz
External Dimensions
(Height x Width x Depth)
685 mm X 382 mm X 296 mm
685 mm X 415 mm X 296 mm
1,MFL68026021,영영 18. 2. 2. 영영 4:19 Page 28
28
ENGLISH
">