advertisement
▼
Scroll to page 2
of 24
LH-T3602ME_NA4HLLA_ENG_20Y DVD RECEIVER OWNER'S MANUAL MODEL: LH-T3602ME (Main Unit: LH-T3602 Speakers: LHS-36MEF, LHS-36MEC LHS-36MEW, LHS-36MES) USB R Before connecting, operating or repairing this product, please read this instruction booklet carefully and completely. CAUTION: The CAUTION (dripping as apparatus should not be exposed to water splashing) and no objects filled with liquids, such should be placed on the apparatus. or vases, CAUTION the Power Cord Most appliances recommend they be placed upon circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER concerning a (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. dedicated manual to be certain. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions frayed shock to persons. could result in electric shock The exclamation examine the cord of your appliance, and if its appearance indicates damage or deterioration, triangle point within an is intended to alert the presence of user important operating (servicing) instructions in the accompanying the product. equilateral to the and maintenance literature it, discontinue replaced with use an Periodically unplug appliance, and have the cord replacement part by an exact authorized servicer. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. LASER PRODUCT To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure LASER PRODUKT that the KLASSE 1 LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 fire. of the Protect the power cord from CLASS 1 or PRODUIT plug is easily accessible. LASER CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. CAUTION: This To product employs ensure proper owner's manual Should the unit use a Laser of this System. product, please read this carefully and retain it for future reference. require maintenance, contact an authorized The cord is built into the any reason grip for the plug fitted to this product existing power cord as supplied. If, for you need to shorten the cord, service center. Use of controls, adjustments procedures other than those or the performance of specified herein may result hazardous radiation exposure. To prevent direct exposure to laser beam, do not try in to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. 2 A new plug must be used to ensure your continued safety by securing the plug to the power cord in accordance with Plug & Socket Regulations 1994. Introduction Maintenance and Service MaintenanceandService.................3 Beforeuse.............................4 FrontPanel/RearPanel...................5 RemoteControl.........................6 Installation and a chapter before service technician. HANDLING THE UNIT Setup TVConnections.........................7 Optional Equipment Refer to the information in this contacting Connections . . . . . . . . . . .8 When shipping AntennaConnections....................8 SpeakerSystemConnection...............9 .10 Displaying Disc Information on-screen InitialSettings.........................10 GeneralOperation......................10 Language...........................10 Display.............................11 materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed . . . . . at the save the the unit Please original shipping carton and packing factory. the exterior surfaces clean Keeping Audio..............................12 Do not 5.1SpeakerSetup.....................12 Lock(ParentalControl).................13 near Others..............................13 with the unit for a leave marks the surface. use volatile liquids such as insecticide spray the unit. Do not leave rubber on or plastic products in contact long period of time. since they Operation Generalfeatures.......................14 Additionalfeatures.....................15 Audio CD MP3/WMA file .16 Playing ProgrammedPlayback..................16 ViewingaJPEGfile....................17 PlayingaDivXMoviefile.................18 .19 PresettingtheRadioStations ListeningtotheRadio...................19 SleepTimerSetting.....................20 an or . . . . . . . . . . . . . . . . Cleaning surfaces Mute.................................20 UsingHeadphoneJack..................20 XTS/XTSpro...........................20 player, use a soft, dry cloth. If the extremely dirty, use a soft cloth lightly with a mild detergent solution. are moistened Do not . Dimmer...............................20 the unit To clean the or use thinner, strong solvents such as these as might damage alcohol, benzine, the surface of the unit. Maintaining the Unit The DVD/CD Receiver is a high-tech, precision optical pick-up lens and disc drive parts worn, the picture quality could be device. If the VIRTUALsound........................20 are SoundMode...........................20 diminished. REFERENCE Depending on the operating environment, regular inspection and maintenance are recommended after LanguageCodes.......................21 AreaCodes...........................21 Troubleshooting.....................22-23 Specifications dirty or every 1,000 hours of use. For details, please contact your nearest authorized service center. 3 Introduction Before To of Types use of this Playable Discs DVD read this proper product, please owner's manual carefully and retain for future ensure use (8cm/12cmdisc) reference. Video CD This manual provides information on the (VCD) (8cm/12cmdisc) operation Audio CD and maintenance of your DVD/CD Receiver. Should require service, contact an authorized service (8cm/12cmdisc) the unit location. In addition, this unit can play a DVD-RW, DVD+RW, SVCD and CD-R or CD-RW that contains audio titles, About the " Symbol Display " MP3, WMA, JPEG may appear your TV display during operation and indicates that the function explained in on this owner's manual is not available on that Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions. specific Used in this Manual Note: Indicates special notes and operating features. Tip: Code Regional Indicates tips and hints for making the task easier. This unit has unit. This unit A section whose title has is applicable only symbol. of the following symbols represented by the one to the disc DivX files. Notes: DVD video disc. Symbol or as the Notes rear on a regional code printed on the rear of the play only DVD discs labelled same can of the unit Regional or Codes Most DVD discs have globe numbers in it Video CDs number must match your DVD code or the disc cannot play. MP3 Discs WMA Discs JPEG Discs DivX Discs Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital are registered trademarks of Digital Theater Surround" 4 a DVD and finalized DVD±R/RW Audio CDs Systems, Systems, "ALL". Inc. Copyright 1996, 2003 Digital Theater Rights Reserved." Inc. All clearly visible on with the one or more cover. This player's regional If you try to play a DVD with a different regional code from your player, the message "Check Regional Code" appears on the TV screen. Front Panel/Rear Panel MIC 1/MIC 2 Connect 2 or a microphone to MIC 1 or MIC to both sockets. PHONES connector STANDBY/ON DISC Tray STANDBY indicator Lights mode Press and hold down this button about 3 OPEN/CLOSE button red when the receiver is in seconds, then press repeatedly VOLUME controller DISPLAY Window Remote USB port Connect to sensor USB port of memory device (USB to select other function. Standby (off). a Introducin FUNC./PLAY a memory TUNING(-/+) /SKIP(.bb/BB>) MONO/ST./ P./STEP etc.) buttons STOP Power Cord SPEAKER connectors FM Antenna connector L AUDIO R AM Loop Antenna connectors MONITOR OUT connector AV1 AUDIO Input (L/R)/VIDEO IN Connectors Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 5 OPEN/CLOSE Remote Control (Z) and closes the disc Opens tray. AUX Selects POWER Select the output To (CD/DVD) source System's tuner (FM ly directly select numbered or options in Marks Selects sound effect. DISPLAY b/B/v/V Selects Acknowledges menu Reverse/ Forward slow TITLE Displays the disc's Title VOLUME To playback. menu, if available. (+/-) adjust speaker volume. PROG. REVERSE/FORWARD SKIP Accesses ( . />) STOP (x) or removes Program menu. MEMO. Enter PAUSE/STEP ( X ) PLAY (B) a radio station's frequency into the tuner. CLEAR Removes REPEAT program all a track number menu or a MARKER SEARCH mark on the on the menu. MUTE REPEAT A-B Repeats selection. TUN.(-/+) (b/B): forward. Repeat chapter, track, title, menu To tune in the desired radio station. DVD disc. or the . SCAN/SLOW(bb/BB) Search backward menu. Select programme of Radio. MENU menu on a in the PRESET(v/V): SETUP Accesses the display. (left/right/up/down) option an ENTER Selects the sound mode. setup menu. language (DVD). Accesses On-Screen language (DVD) or audio channel (CD). or removes subtitle Selects the VIRTUAL sound SOUND Accesses MARKER SEARCH a VIRTUAL audio an panel during point during playback. a Displays AUDIO an of the SUBTITLE sound. Selects the front on SEARCH natural and realistic enjoy great change brightness window MARKER XTS pro To off automatical- System to turn specified time. Press to * enjoy a in power-on status. This button is not available. more at display a menu. To the multimedia files. DIMMER 0-9 numerical buttons service, programme number a enjoy Set the and AM bands) Select source. SLEEP BAND Select the input USB DVD ZOOM sequence. RETURN Removes the setup menu. ECHO VOL.(V/v) Adjusts echo volume MIC VOL.(V/v) Adjusts microphone Remote Control volume Remote Control Operation Range Point the Remote Control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: About 30° in each direction in front of the remote Remove the the Remote Caution 6 new batteries. Never mix different types of batteries battery (standard, alkaline, etc.). installation cover on the Control, and insert (size AAA) batteries aligned correctly. sensor Do not mix old and battery with rear of two R03 and Installation and Setup TV Connections Make the one of the capabilities following connections, depending existing equipment. on of your Video connection Connect the MONITOR OUT Receiver to the VIDEO IN Tips: video cable jack from the DVD/CD jack on the TV using the supplied (V). your TV and other equipment you wish to connect, there are various ways you could Depending on connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, System or other devices as necessary to Stereo make the best connections. Caution: Make sure directly the DVD/CD Receiver is connected to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. Rear of TV VIDEO INPUT V L AUDIO R Rear of DVD/CD Receiver 7 Optional Equipment 1. Connect Connections Connect the VCR to the AV IN connectors. a 2. Connect the USB port of USB Memory (or MP3 to the USB port on the front of the unit. player, etc.) Antenna Connections supplied FM/AM Antenna for listening to the radio. Connect the AM Loop Antenna to the AM aerial connector. Connect the FM Wire Antenna to the FM aerial connector. Rear of VCR Front of DVD/CD Receiver IN OUT Notes: VI To AUDIO prevent noise pickup, keep the AM from the DVD/CD Receiver and other To AUDIO OUT (L/R)/ VIDEO OUT USB Memory, MP3 Player (or Memory Card Reader, etc.) To AV IN AUDIO Be Loop Antenna away components. to fully extend the FM wire Antenna. connecting the FM Wire Antenna, keep possible. sure After (L/R)/ VIDEO as L AUDIO R AM FM Wire Antenna Loop Antenna (supplied) (supplied) To Remove the USB Device from the unit 1. Choose a different function mode twice in (x) or press the STOP L a row. AUDIO R 2. Remove the USB device from the unit. Notes: Don't extract the USB device while Music files files can This unit (MP3/WMA), image be played. can not use a files operating. (JPEG) and DivX USB HUB. Recommended Memory Cards. Compact Flash Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multi Media Card (MMC), Memory Stick Pro (MS-Pro) Compatable with : FAT16, FAT32 Only use the memory cards recommended. Devices which require additional program installation - - when you have connected the unit to not In a computer case of a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. Up to four primary partitions of a drive supported. If there is an extention partition, it will be supported. If the drive of USB device is two folder is move displayed to the initial on the menu or more, a Digital cameras supported. are not drive If you want to after you select a folder, screen. press RETURN. 8 are supported. and mobile phones are not it as horizontal Connection Speaker System Connect the speaker cords to the speaker terminals. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Front Front speaker (Right) speaker (Left) Center speaker Notes: Be sure to match the appropriate -- to terminal If the cables --. speaker on are cable to the the components: + to + and reversed, the sound will be distorted and will lack base. If you use front rating, adjust speakers with low maximum the volume excessive output on the carefully to speakers. input avoid Rear speaker (Left surround) Rear speaker (Right surround) InstaliodSeup Subwoofer About Ferrite Core Be sure cables (Optional) to attach the ferrite (for connecting This ferrite core can core to this unit). once on 3. Close the ferrite core 2 core stopper [a] of the ferrite 2. Wind the cable 1 speaker reduce noises. How to attach the ferrite 1. Press the to the the ferrite core to open. 3 core. unitl it clicks. The length short Note: Attach the ferrite as here is much as possible. core near the unit (Refer to the fig.3 and comment.). 80 mm 9 Displaying Disc Information Initial on-screen You can loaded 1. display various information about the disc on-screen. Press DISPLAY to show various playback information. The items 2. displayed differ depending playing status. type or You can change Title select an (Track) -- the disc By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 10 to 13. To display and exit the Menu: Press SETUP to display the A second press of menu. SETUP will take you back to initial by pressing v / V and setting by pressing b / B. screen. item select the or on Settings Current title (or track). (or tracks). number/total number of titles Chapter Current chapter number/total number of chapters. Time Elapsed playing time. Audio Selected audio language or channel. -- -- To go to the next level: Press B on the Remote Control. To go back to the previous level: Press b on the Remote Control. GENERAL OPERATION -- Subtitle Angle Sound -- -- -- Selected subtitle. Selected angle/total number of angles. no button is screen Press SETUP. The Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired press B to move to the third level. 4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP Selected sound mode. Note: If 1. 2. pressed for a display disappears. few seconds, the on- or Setup menu appears. PLAY to exit the option Setup then menu. LANGUAGE LANGUAGE OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original Move Select OSD Select a language for the Setup menu and on-screen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio (disc audio), subtitles, and the disc menu. Original -- Refers to the track original language the disc was Other To select another in which recorded. language, press number corresponding 4digit number according to the language code list on page 21. If you enter the wrong language code, -- buttons then ENTER to enter the press CLEAR. 10 DISPLAY DISPLAY TV 16:9 Aspect Display Widescreen Mode Move TV Select Aspect 4:3 Select when -- 16:9 Display Display -- a Select when standard 4:3 TV is connected. a 16:9 wide TV is connected. Mode Mode setting works only when the TV Aspect InstaliodSeup mode is set to "4:3". Letterbox -- Displays a wide picture with bands portions of the screen. on the upper and lower Panscan on -- Automatically displays the entire screen the wide and cuts off the picture portions that do not fit. 11 AUDIO 5.1 Each DVD disc has Set the receiver's variety of audio output options. AUDIO options according to the a type of audio system you Press ENTER and 5.1 Speaker Setup On Vocal On Speaker Front L Small Volume 0 dB Distance 0 m Test Move Off Select Select Control (DRC) Move Return 2. Use b / B to select the desired 3. Adjust options using presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). 4. Then, you may listen Select without losing clarity a movie at a lower volume of sound. Set DRC to On for this effect. *1: Dolby Digital only Enter speaker. 1 With the DVD* format, you can hear a program's soundtrack in the most accurate and realistic to menu AUDIO Select Speaker Setup DRC Size Dynamic Range for the built-in 5.1 channel appears. AUDIO 5.1 following settings surround decoder. 1. use. Speaker Setup Make the v / V / b / B buttons. Press ENTER to confirm your selection. Returns to the previous menu. selection Speaker speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) a Note: Vocal Certain Set Vocal to On only DVD is The karaoke channels playing. when a multi-channel karaoke mix into normal stereo sound. on the disc will speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the change speaker settings settings. fixed, you are cannot the Volume Press b / B to speaker. (-5dB adjust the output 5dB) level of the selected ~ Distance If you connected speakers to your DVD/CD Receiver, the Distance lets the speakers know how far setting the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. Press b / B to adjust the Distance of the selected speaker. (You can't adjust front / Woofer speakers) Test Press b / B to test the of each signals the volume to match the volume of test memorized in the system. Front Left (L) → Center Rear 12 Right (R) → → Front Rear Left (L) speaker. Adjust signals Right (R) → → SubWoofer LOCK Area Code (Parental Control) Enter the code of the LOCK Rating Unlock Password **** Area Code US area whose standards used to rate the DVD video disc, based page 21. 1. Select "Area Code" on the LOCK on were the list on then menu press B. 2. Move 3. Rating Blocks playback of rated DVDs based content. Not all discs are 1. Select the LOCK "Rating" on on Follow step 2 as shown previous paragraph (Rating). Select 4. their Select the first character using v / V buttons. Press B and select the second character using v / V buttons. rated. menu 5. then Press ENTER to confirm your Area code selection. press B. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. OTHERS OTHERS Input a password and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. 3. Select rating a Rating 1-8: restrictions from 1 to 8 using PBC On DivX(R) Registration Select InstaliodSeup the v / V buttons. Rating one (1) has the most and rating eight (8) is the least Select Move restrictive. PBC Unlock: If you select unlock, parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating press SETUP to exit the menu. Set Playback selection, then enter or change password. 1. Select Password 2. Follow step 2 as on the LOCK shown above then press B. (Rating). change the password, press ENTER when the "Change" option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. 3. Press SETUP to exit the 1. Press SETUP to 2. Input the ENTER. display as played the same information, visit www.divx.com/vod. 1. Select 2. Press ENTER while "Select" is selected and the "DivX(R) Registration" option then press B. registration code will appear. Use the registration code to purchase clear it using the Setup rent the www.divx.com/vod. Follow the instructions and a disc for playback on this unit. menu. 6-digit number "210499" and The password is cleared. or VOD service at download the video onto the are to Audio CDs. videos from DivX can played according provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more menu. you Off. We forget your password If you forget your password, following steps: or are DivX(R) Registration menu To If you to On Off: Video CDs with PBC way can (PBC) the PBC. Password You Control On: Video CDs with PBC 3. Press ENTER to exit. press Note: All the downloaded videos from DivX be played back on VOD can only this unit. 13 Operation General features Buttons (OPEN X (PAUSE) / CLOSE) Opens (. closes the disc tray. or During playback, Press X SKIP Discs Operations Z / >) press X to pause repeatedly to playback. play Frame-by-Frame. During playback, press next chapter/track or to current chapter/track. SKIP Press SKIP . twice briefly (. to >) to go to the beginning of the or return to the step back to the previous chapter/track. SCAN (m / M) During playback, press SCAN (m or M) repeatedly required scan speed. DVD : 5 steps (X2, X4, X8, X16, X100) DivX disc, Video CD : 4 steps (X2, X4, X8, X16) WMA/MP3, Audio CD : 3 steps (X2, X4, X8) to select the REPEAT During playback, press REPEAT repeatedly to select desired repeat mode. DVD Video discs: Chapter/Title/Off a Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off A-B During playback, each press of A-B button to select point point B and repeats a sequence from point A (Starting point) to point B (End point). A and Press REPEAT A-B to exit. ZOOM During playback or pause mode, press ZOOM to enlarge image (3 steps). You can move through the zoomed picture using bBvV the video buttons. TITLE If the current DVD title has appears on the screen. a menu, the title Otherwise, the disc menu menu may appears. DVD MENU (SUBTITLE) The disc menu appears on the screen. During playback, press SUBTITLE repeatedly language. to select desired subtitle (AUDIO language) During playback, press AUDIO repeatedly different audio language or audio track. (AUDIO channel) Press AUDIO to hear a repeatedly during playback to hear a (STER., LEFT or RIGHT). different audio channel SLOW 14 Pause mode, press SLOW (m or M) to select the required speed. DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16) Video CD : T (1/2, 1/4, 1/8, 1/16) a Notes general features: on Last Scene If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback Memory This receiver memorizes last that is viewed. The last cancels. scene from the last disc remains in memory the disc from the receiver or scene if you remove switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. even Zoom may not work on some DVDs. The A-B repeat function is available only in the current title. Note: This receiver does not memorize the Additional features switch off the receiver before of scene commencing to a disc if you play the disc. Time Search To start at any chosen time playing Press DISPLAY 1. on System the disc: appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold P./STEP on the front panel or remote control for more than 5 seconds to be able to during playback. Press v / V to select the time clock icon and 2. "--:--:--" appears. 3. Input the start time in required seconds from left to hours, minutes, and If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. right. Press ENTER to confirm. 4. Playback AUTO: start can desired point the TV screen or AUTO). Select when the unit is connected with Multi on PAL: from up to nine memorized at the the disc. The Marker icon appears to enter up to nine Select when DVD/CD Receiver is connected with PAL-TV. marker, press MARKER a Select when DVD/CD Receiver is connected with NTSC-TV. playback To enter points. system (PAL, NTSC system TV. NTSC: Marker a a starts from the Marker Search You select When the selected system does not coincide with the system of your TV, normal colour picture may not be displayed. selected time. To enter Select You must select the on briefly. Repeat markers. To Recall or 1. During disc search menu 2. 3. Clear a Marked Scene playback, appears press SEARCH. The marker on the screen. Within 10 seconds, press b / B to select number that you want to recall or clear. Press ENTER and marked scene. playback a marker starts from the Or, Press CLEAR and the marker number is erased from the list. 4. You on can play any marker by the marker search menu. inputting its number Screen Saver The Stop appears when you leave the unit in mode for about five minutes. screen saver 15 Playing This unit Audio CD an Audio CDs play can or or MP3/WMA file MP3/WMA files recorded media. ENTER and playback playback or 1. 2. 0:00:00 contain 300 tracks. disc. Select a track " on the "List", then press PROG. or icon then press ENTER to place the selected track on the "Program" list. Repeat to JPEG List (Add)" additional tracks place 1/104 MP3 Program List a select 1/12 Audio CD Insert Audio CD and MP3/WMA Discs: track/file then press PLAY or starts. You can use variable a functions. Refer to page 14. 0:00:00 can program MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media Audio CD, a menu appears on the TV screen. Press v / V to select Programmed Playback The program function enables you to store your favorite tracks from any disc in the receiver memory. A the list. on Program Track1 Music Folder 1 Track2 Music Folder 2 Note: Track3 Music Folder 3 Track4 Music Folder 4 Track5 Music Folder 5 Track6 You Music Folder 6 Track7 Music Folder 8 add all tracks in the disc. Select 3. move to the next page. CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or a PHOTO word on top of the menu as compatibility is 4. Press PLAY with this highlighted. player ? 5. follows: - a file extension other than an MP3/WMA file ".mp3" 1. CD-R ? If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to format should be ISO 9660 playback that you use Easy-CD 9660 file system. ? File names must ? They should not Creator, a which creates an once. resume normal playback from programmed playback, select a track of AUDIO CD (or MP3/WMA) list and then press PLAY. 2. ? / ? ? * : " on the disc should be less than 999. 2. requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is a disc. The repeat required a desired repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Off(No display): Erasing 1. The total number of files playing Press REPEAT to select ? maximum of 8 letters and .mp3 or .wma extension. contain special letters such as Tracks Press REPEAT when an This DVD/CD Receiver played To ISO <>letc. ? a does not Track from play repeatedly. "Program" List Use vVto select the track that you wish to from the Program list. Press CLEAR. Alternatively, select " erase (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks Erasing on the the list. Complete Program Use v / V to select " (Del all)", List then press ENTER. in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the 16 copyright owner. in icon appears. MP3 / WMA files.We recommend should have incorporate list have Repeat Programmed / ".wma". ? physical Playback begins - The DVD/CD Receiver cannot read that has ENTER to start. is Sampling frequency: within 32 48 kHz (MP3), within 24 48kHz (WMA) Bit rate: within 32 320kbps (MP3), 40 192kbps (WMA) - or the order in which you programmed the tracks. Playback stops after all of the tracks on the - ? icon Select the track you want to start playing on the "Program" list. Press MENU to move to the next "Program" MP3 / WMA disc limited (Add All)" page. Press MENU to ? " then press ENTER. Tips: On can Music Folder 7 Track8 Note: The programs are also cleared when the disc is removed. Viewing This unit a JPEG file Zoom JPEG Each time press ZOOM the order. play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. 1. can Insert disc and close the tray. The JPEG menu appears on the TV notes on Zoom y the video enlage screen. JPEG disc limited Preview in the Zoom off Press V/b/m to reduce the video PHOTO List on Press v/B/M to a setting change following as compatibility image. image. with this player is follows: JPEG Folder 1 JPEG Folder 2 ? JPEG Folder 3 JPEG Folder 4 Depending upon the size and number of JPEG a long time for the DVD/CD files, it could take JPEG Folder 5 JPEG Folder 6 Receiver to read the disc's contents. If you don't display after several minutes, JPEG Folder 7 JPEG Folder 8 see an on-screen of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels some 2. Press v / V to select folder, and press ENTER. a A list of files in the folder appears. If you are in a file list and want to return to the Folder list, previous remote to 3. use the v / V buttons the on and press ENTER. highlight to move ? to the ? four Slide : Speed options (Normal), >>> (Fast) and II (off). Use v /V /b /B to highlight the Speed. Then, use b / B to select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. > are (Slow), >> x 2048 pixels and burn another disc. on the disc Some discs may be incompatible due to a different recording format or the condition of disc. Ensure that all the selected files have the extensions when Tips: There 2760 The total number of files and folders should be less than 999. ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While viewing a file, you can press STOP previous menu (JPEG menu). as ? --- ? copying If the files have ".jpe" please them File rename names without able to be read though the files Windows by or as into the CD ".jpg" layout. ".jpeg" extensions, ".jpg" file. ".jpg" extension will not be this DVD/CD Receiver. Even are shown as JPEG image files in Explorer. Slide Show Use vVbBto highlight the (Slide Show) then press ENTER. Still Picture 1. Press PAUSE/STEP Operation slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide show, press PLAY PAUSE/STEP again. Moving (. or >) once to advance to the next To rotate while or viewing a previous file. picture Press b / B picture press to another File Press SKIP picture or during showing clockwise or a picture to rotate the counter-clockwise. 17 Playing DivX Movie file this DVD/CD Receiver you Using 1. a Insert a appears play can DivX disc DivX disc. disc and close the tray. The MOVIE on the TV screen. menu as compatibility with this is limited player follows: ?A vailable resolution size of the DivX file is under 800x600 ? MOVIE The file (W x name H) pixel. of the DivX subtitle is available by 45 characters. 0:00:00 List Movie Folder 1 ? Movie Folder 2 If there is impossible code to express in the DivX as mark on the " file, it may be displayed Movie Folder 3 Movie Folder 4 Movie Folder 5 " _ display. Movie Folder 6 Movie Folder 7 Movie Folder 8 ? If the number of the screen second, this unit may normally. per 1 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons the remote to on 4. ? or PLAY. Press STOP to exit. Tips: Press MENU to On move to the next page. MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the a CD with menu is highlighted. Notes: Be to select "SUBTITLE ON" mode subtitle file every time before When the subtile has original subtile is only more playing than two The microphone You can not does not work adjust the DivX file Notice for a by pressing DivX file languages the 30 or audio is DivX file ".mpg ", ".mpeg ", ".divx" Playable Subtitle format SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) Codec format "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ". Playable ? Audio format "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 32 48 kHz ? can not be during playing a played. DivX file. playing. displaying the Divx subtitle display properly during playback, press and hold S-TITLE about 3 seconds then press STITLE to select another language code until the subtitle displayed properly within 24 file, sound mode and VIRTUAL sound If the subtitle does not 18 ".avi ", either video - . in the available. The DivX files in your memory card is over operate Playable sure during interleaved, outputted. Playable If you want to view a particular file, press v / V to highlight a file and press ENTER not If the video and audio structure of recorded file is not and highlight press ENTER. 3. ? frame is - 48kHz Bit rate: within 32 40 - (WMA) 320kbps (MP3), 192kbps (WMA) - (MP3), the Radio Stations Presetting You can Before Listening preset 50 stations for FM and AM (MW). tuning, make sure Preset radio stations in the DVD/CD Receiver's that you have turned down the volume. AM memory first (MW) on the Remote Control until FM appears in the display or Press BAND until FM 1. window. Press and hold TUN.(-/+) frequency indication until the starts to Press PRESET +/- change, tunes in Scanning stops when the DVD/CD Receiver tunes in a one Remote preset Press PRESET +/- 5. on the Remote Control. number will flash in the on display repeatedly preset station at Press PROG/MEMO Repeat steps the Remote Control again. To listen to non-preset Use manual For manual 3 to 6 to store other stations. a station with Press TUN.(-/+) repeatedly station manually. a weak or signal To select tuning, appeared and then press PROG/MEMO cleared. in the again, display window the stations are If you have accidentally entered into the "ERASE ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, the "ERASE ALL" display will go off by itself and to normal mode. or (DVD/CD, AUX, USB). radio stations tuning in step 2. TUN.(-/+) repeatedly. press and hold TUN.(-/+) for the front panel. on radio station the number buttons on directly the Remote preset radio station directly. preset station 4, press 4 on the Remote Control. To listen to preset station 19, For example, a to listen to press 1 then 9 (within 3 For your reference If an FM program is Press MONO/ST. disappears stereo in the effect, but the button again seconds). noisy panel so that "ST." display window. There will be no the reception will improve. Press on the front to restore the stereo effect. To Note: If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. change press tuning, preset a can use Control to select Press and hold PROG/MEMO for about two seconds To time. in step 3 to tune in the To clear all the stored stations change automatic about two seconds You and "ERASE ALL" is a Press POWER to turn the DVD/CD Receiver off For automatic To tune in the Remote - select another function mode The station is stored. 7. on To turn off the radio window. the Remote Control to on appears in the or select the preset number you want. 6. (MW) by rotating VOLUME on the by pressing VOLUME + or on the Control repeatedly. Adjust panel front Press PROG/MEMO AM the volume 3. station. A or Control to select the preset station you want. Each time you press the button, the DVD/CD Receiver for about two seconds then release. 4. the The last received station is tuned in. 2. (MW) changes alternately. 3. on window. display And then every time you press BAND, FM and AM 2. radio stations" (see "Presetting left). Press BAND 1. to the Radio improve reception Reorient the supplied antennas. a the preset number, follow the steps 5-6 as above. 19 Sleep You Timer XTS/XTS pro Setting at specified a The SLEEP indicator and sleep setting changes in the time. Press SLEEP to set the desired 1. Each time you press XTS pro the following order. set the DVD/CD Receiver to turn off can automatically sleep time. XTS ON NORMAL → → XTS-P ON... XTS-P ON time appears in the SLEEP180→150→120→90→80→70→60→50→40→ sound quality of the LG Technology optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. 30→20→10→OFF XTS ON display The window. Each time you press SLEEP the changes in the following order. 2. When playing the movie with the weak bass sound relatively to the general music, it enforces the sense of sound at woofer for you to satisfy with. In the mode of 2 CH BYPASS, It creates the high display effect by playing the sound source via the rear speakers same as the front speakers. Note: You check the time can remaining before the DVD/CD Receiver turns off. Press SLEEP. The display unique creates the setting remaining time appears in the window. Note: Dimmer This function will window The XTS of the change brightness display panel during in power-on status. DIMMER repeatedly. on Press the the mode is temporarily disabled when from 2.1 CH to 5.1 CH and it is enabled when the front changing changing it to 2.1 CH. NORMAL XTS-P and XTS mode tune off Mute Press MUTE to mute your unit. can mute your unit in order, for You answer the display window. telephone, a stereo to press VIRTUAL the "MUTE" indicator flashes in the Using Headphone Connect VIRTUAL sound example, Jack headphone plug ( 3.5mm) speakers plug in are automatically VIRTUAL sound. Display Effect 2.1 ch. VIRTUAL 3D STEREO 5.1 ch VIRTUAL Multichannel sound 3D STEREO into the Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. PHONES connector. The setting Source disabled when you headphones (not supplied). Multichannel sound The Multichannel sound makes ch sound therefore this mode 5.1 ch feel 10.1 a provides a emotion which you are involved with sound and you feel detailed sound. can Sound Mode You one the enjoy surround sound simply by selecting pre-programmed sound fields according to program you want to listen to.(2 ch. sound only) can of the BYPASS ON STAGE STUDIO CLUB THEATER 1 CHURCH PL ll MOVIE PL ll MUSIC PL ll MTRX BYPASS... → → → → → → → → → Note: Initial sound mode is BYPASS. 20 → HALL Language Codes Use this list to input your desired language for the Disc Audio, Disc Subtitle, Disc Menu. following initial settings: Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 8373 8471 8479 Area Codes Choose a area Area code from this list. Code AF Area Code Area Code Area Code ET Malaysia MY Saudi Arabia SA FJ Maldives MV SN Finland FI Mexico MX France FR Monaco MC Senegal Singapore Slovak Republic BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Heard and McDonald Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU Afghanistan Argentina AR Ethiopia Fiji Australia AU Austria AT Belgium SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Portugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Czech Republic Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg UG 21 Troubleshooting Check the following guide for the possible cause of a before problem contacting Symptom Correction No power. ? The power cord is disconnected. ? The power is on, but the DVD/CD Receiver ? No disc is inserted. ? ? picture. the power cord wall outlet. securely Insert that the DVD or, Plug The TV is not set to receive DVD signal ? Select the ? sound or The video cable is not connected ? The connected TV power is turned off. ?T ? The ? a very low-level sound is heard. only connected with the equipment signal output. The audio cables not connected are ? is the TV. urn on Select the correct input mode of the audio receiver so you can hear the sound from the DVD/CD Receiver. Connect the audio cable into the ?T ? The audio ? Replace ? The disc is ? Clean the disc. ? No disc is inserted. connecting cable is damaged. dirty. poor. The DVD/CD Receiver does not start playback. input screen. The power of the equipment connected with the audio cable is turned off. ? video jacks securely. securely. playback picture appropriate the urn on equipment connected with the audio cable. ? Insert a it with disc. new one. (Check that the DVD, audio CD indicator in the DVD is lit.) ? An display jacks securely. audio cable is not set to receive DVD ? The (Check Connect the video cable into the ? securely. no disc. mode on the TV so the picture from the DVD/CD Receiver appears on the output. TV There is a into the audio CD indicator in the DVD is lit.) does not work. No service. Cause ? disc is inserted. unplayable Insert a playable disc. or display (Check the Regional disc type, colour system and code.) ? The disc is ? The disc is not placed upside placed down. within the ? guide. ? Place the disc with the down. Place the disc correctly ? The disc is ?Amenu ? Loud hum heard. or noise is The is dirty. on Rating ? The disc is ? The the TV screen. level is set. speakers poorly. are The DVD/CD Receiver is located too close to the TV. 22 guide. ? Press the SETUP button to turn off the menu screen. Cancel the rating Rating function or change level. ? Clean the disc. ? Connect the speakers and components securely. connected ? the disc tray inside the Clean the disc. the and components side ? ? dirty. on playback ? Move your TV away from the audio components. Cause Symptom Radio stations cannot be tuned in. ? The antenna is Correction positioned or connected poorly. ? Connect the antenna ? Adjust securely. the antennas and connect an external antenna if necessary. ? The signal strength of the stations is (when tuning in with automatic tuning). too ?T une in the station weak ? No stations have been preset or preset stations have been cleared (when ? Preset the stations manually. (page 19). tuning by scanning preset stations). The Remote Control does not work properly. ? The Remote Control is not remote sensor pointed at the ? of the DVD/CD Receiver. Point the Remote Control at the remote sensor of the DVD/CD Receiver. ? The Remote Control is too far from the DVD/CD Receiver. ? ? There is ? Remove the obstacle. ? Replace ? Press DIMMER an obstacle in the path of the Use the Remote Control within about 23 ft (7 m). Remote Control and the DVD/CD Receiver. The front display panel is too dim. ? The batteries in the Remote Control flat. ? Nothing display. is displayed on the front are panel the batteries with on new ones. the Remote Control. 23 Specifications Power Genral Refer to main label supply consumption Weight Power Refer to main label Net 3.9 kg 430 x External dimensions CD/ VD Video FM Tuner AM [MW] (W x H x D) x 295 mm Temperature: 5°C to 35°C, Laser Semiconductor laser, Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL 625/50, NTSC 525/60 0.5 % 1.0 V nm (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter) 1 Video output 1.0 V Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency 87.5 Stereo mode 50W+50W(4Ωat1kHz,THD10%) Front: 45W + 45W (Rated Output Power 30W, 108.0 MHz - 60 dB 140 and 1,620 kHz - 3834RT0020Y or 520 108.0 MHz 1,720 kHz (Rated Output Power 30W, 4Ω (Rated Output Power 60W, 8Ω AV IN, MIC (OPTIONAL) MONITOR, PHONES: (32 Ω, 1.0 V) + 45W Center Way 150 1 Speaker - (1m) 1 Way 90W D) 349x200x200 0.87 to change kg 1 Speaker 1 Way 150 - 20,000 Hz 83 dB/W (1m) 314x120x79 0.77 without notice. Speaker Passive Subwoofer (LHS-36MEW) 1 Way kg 150 - 20,000 Hz 83 dB/W (1m) 120x90x117 0.53 Speaker kg 40 - 1,500 Hz 83 dB/W (1m) 75W 150W 90W mm 1 8Ω 45W 90W mm 1 kHz, THD 10 %) Hz, THD 10 %) 4Ω 45W 45W subject %) at 30 Speaker (LHS-36MES) 4Ω 20,000 Hz 83 dB/W x THD 10 at 1 Rear Speaker (LHS-36MEC) 4Ω are - Subwoofer*: 75W Weight specifications 1 - (Mono) Surround*: 45W Rated Net MHz, 87.5 Centre*: 45W 1 H 74.0 450 kHz Sound Pressure Level x - 8,000 Hz - 522 Type Impedance Frequency Response Input Power Max. Input Power Net Dimensions (W 65.0 or 10.7 MHz Speaker (LHS-36MEF) : 650 (1 kHz, at 1W position) (20 kHz LPF) (p-p), 75 Ω, negative sync., RCA jack x (p-p), 75 Ω, negative sync., RCA jack x Front P/NO wavelength More than 70 dB Inputs Outputs Designs status: Horizontal 150 Hz to 18 kHz More than 75 dB (* Depending on the sound mode settings and the source, there may be no sound output.) Speakrs Operation 5% to 85% Surround mode Amplifer 57 Operating conditions Operating humidity mm 265x380x195 3.95 kg mm
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement