SMART TV Quick Setup Guide
* Image shown may differ from your TV.
* Image shown on a PC or mobile phone may vary depending upon the Operating System (OS).
ENGLISH
Wireless Network Connection
LG wireless
dongle
or
Wireless AP (Router)
Wired Network Connection
Internet connection
Wired router
*MBM64101902*
P/NO : MBM64101902 (1402-REV01)
Network Settings
ENGLISH
Premium Apps are pre-installed on the TV. These may vary by country.
Depending upon the version of the software, icon position can be changed.
1
Press the
(Smart) button to access the
home menu. Select
(Settings) and press
Wheel (OK).
4
If the connection is completed, Connected is
displayed.
Overview
Overview
NETWORK
Over
Overview
Overview
Overviewvievie
Overview
Overviewv
Overview
Overvie
Overviewvie
Overview
Overview
2
Select the Network
Wi-Fi Connection.
Overview
Overview
Wired Connection or
NETWORK
Over
Overview
Overview
You can check the status of connection
in Advanced Settings.
Overview
WI-FI
Overviewvievie
Overview
Overviewv
Overview
Overview
Overview
ꔓ Over
Overvie
Overviewvie
Overviewv
Overview
Overviewv
Overviewv
Overview
Overview
Overviewv
Overview
Overview
Overview
Overviewvieiewvie
Overviewvie
Overview
3
The device automatically tries to connect to
the network available (wired network first).
When you select the Wi-Fi Connection, the
network list available is displayed. Choose the
network you wish to use.
Overview
Overview
Overview
WI-FI
ꔓ Over
Overviewv
Overview
Overviewv
Overviewv
Overview
Overviewv
Overview
Overviewvieiewvie
Overviewvie
Overview
Overview
For wireless AP (Router) that have the ꔒ symbol,
you need to enter the security key.
Please call LG Customer Service if you experience any problems.
Troubleshooting Network Problems
1
Press the
(Smart) button to access the
(Settings) and press
home menu. Select
Wheel (OK).
2
Select the Network
Wi-Fi Connection
Overview
Overview
NETWORK
Over
Wired Connection or
Advanced Settings.
Overview
Overview
Overview
Overview
Overviewvievie
Overview
Overview
When X appears next to Gateway:
1 Unplug the power cord of the AP (Router),
cable modem, wait 10 seconds. Reapply
power.
2 Initialize (Reset) the AP (Router) or cable
modem.
3 Contact internet service provider or AP
(Router) companies.
ꔓ Over
Overviewv
Overview
Overviewv
Overvie
WI-FI
Check the AP (Router) or consult your Internet
service provider.
Overviewv
Overviewv
Overview
Overviewv
Overviewvie
Overview
Overview
Overview
Overview
Overview
Overview
Overviewvieiewvie
Overviewvie
Follow the instructions below that correlate to your
network status.
Check the TV or the AP (Router).
When X appears next to TV:
1 Check the connection status of the TV,
AP (Router) and cable modem.
2 Power off and power on in the following order;
(1st) the cable modem, wait for the cable
modem to reset (2nd) the AP (Router), wait for
the AP (Router) to reset and the (3rd) TV.
3 If you are using a static IP, enter the IP directly.
4 Contact internet service provider or AP (Router)
companies.
When X appears next to DNS:
1 Unplug the power cord of the cable modem
or the AP (Router), wait 10 seconds. Reapply
power.
2 After the cable modem or AP (Router) has
Initialized (Reset), try to reconnect.
3 Check that the MAC address of the TV/
AP (Router) is registered with your Internet
service provider. (The MAC address displayed
on the right pane of the network status
window should be registered with your
Internet service provider.)
4 Check the AP (Router) manufacturer’s
website to make sure your router has the
latest firmware version installed.
ENGLISH
Depending upon the version of the software, icon position can be changed.
Installation & Setting
ENGLISH
Install the SmartShare PC SW program on your PC.
1
Go to www.lg.com . Then, select your region.
2
Select SUPPORT. Then, search for your model.
3
Select Drivers & Software or SOFTWARE UPDATE. Then, select SmartShare PC SW.
4
Download the SmartShare PC SW and Install it on your PC. You can run the program when
installation is complete.
NOTE
SmartShare service is only available if TV and other devices are connected via a single AP (Router).
SmartShare Connection to Smartphone
1
Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the
same local network.
2
Install/run the app for sharing content on your smartphone (It's called SmartShare on LG phones).
3
Enable your smartphone to share content files with other devices.
4
Open SmartShare application on TV.
5
Select the file type you want to play (movie, audio or photo).
6
Select a movie, music or photo file to play on the TV.
7
Play the media file to view and enjoy it on your TV.
(Smart)
SmartShare
Please call LG Customer Service if you experience any problems.
Updating the TV Firmware
Overview
Overview
GENERAL
Ovee
Overview
ABOUT THIS TV
Overview
Ovee
Overview
Overv
Overviewvieie
Overv
Overview
Overviewvieie
Overviewvieie
wvieiewvie
Overview
Overviewve
Overview
Overview
Overviewvie
Overview
ewvie
Overview
Overviee
Overview
Overviee
Overviwvie
Overviewvie
Overvieiewvie
Overview
wvieiewvie
Overviewve
Overviwvie
Overview
ENGLISH
(Smart)
(Settings)
General
ABOUT THIS TV
Software Version
You can check the Software Version and update it.
If you check the Allow Automatic Updates, the TV will check for updated software automatically each
time the set is turned on (Internet Connection is required).
* When the TV is turned on for the first time after a software update, initialization of the TV may take up
to one minute.
Wi-Fi Direct Setting
ENGLISH
(Smart)
(Settings)
Network
Wi-Fi DIRECT
If a local network is not available, you can connect a portable device directly to the TV using Wi-Fi
Direct.
With SmartShare, you can share files or screens of devices connected to Wi-Fi Direct.
1
If Wi-Fi Direct is set to On, a list of available devices appears. Select your device.
Overview
WI-FI DIRECT
WVWVWV
Overview
WV
Over
Overviewv
Overview
Overviewv
Overviewv
Overview
Overviewv
Overview
Overview
Overview
2
When you are prompted to the connection request, select Yes. Wi-Fi Direct is now connected to
your TV.
* If you are not using Wi-Fi Direct to minimize the interference between Wi-Fi devices,
it is recommended to set Wi-Fi Direct to Off. You can only use devices that support Wi-Fi Direct.
Please call LG Customer Service if you experience any problems.
Miracast Setting
(Smart)
ScreenShare
1
Miracast should be set to ON on your portable device.
2
When your TV is detected, select the device on your portable device.
When connection is completed, the TV screen appears on the device screen.
WiDi (Wireless Display) Setting
Intel’s WiDi (Wireless Display) technology enables easy and fast connection without wires or internet
network for mirrored and dual monitor display on your TV. You can sit back and experience your favorite
movies, videos, photos, online shows and more in full HD on your TV with great image clarity and sound.
(Smart)
ScreenShare
1
On the TV Intel's WiDi is set to On. Your laptop runs the Intel WiDi ( ) program.
* LG TVs do not need to register.
* For more information on Intel WiDi, visit http://intel.com/go/widi .
* You can control your PC using the Magic Remote Control. (above WiDi version 4.2)
2
It detects LG Smart TVs available, which supports WiDi. In the list, select the TV you want and click
Connect. Enter the number shown on the screen into the input field ( ) on your laptop and then
click Continue.
Notebook Screen
3
The laptop screen appears on the TV screen. The wireless environment may affect the screen
display. If the connection is poor, the Intel WiDi connection may be lost.
ENGLISH
Miracast allows a portable device to securely send video and sound to the TV wirelessly.
">
