LG DVK-9713N Owner's Manual


Add to my manuals
56 Pages

advertisement

LG DVK-9713N Owner's Manual | Manualzz
DK9713CNM_HA4CLL_ENG
DVD PLAYER
OWNER'S MANUAL
MODEL
:
DVK-9713N
Before
connecting, operating
please
read this instruction
adjusting this product,
booklet carefully and completely.
or
CAUTION
CAUTION
Most
the Power Cord
concerning
appliances
recommend
they
be
placed
upon
a
dedicated circuit;
That
is,
a
appliance
CAUTION: THESE SERVICING
outlet circuit which powers only that
and has no additional outlets or branch
single
circuits. Check the
specification page
of this owner's
INSTRUCTIONS ARE FOR USE BY
manual to be certain.
QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT PERFORM ANY
Do not overload wall outlets. Overloaded wall
SERVICING OTHER THAN THAT
outlets,
loose or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation are
CONTAINED IN THE OPERATING
dangerous. Any
INSTRUCTIONS UNLESS YOU ARE
electric shock
QUALIFIED TO DO SO.
your
or
of these conditions could result in
or
appliance,
deterioration,
fire.
exposed to water (dripping or splashing)
and no objects filled with liquids, such as
vases, should be placed on the apparatus.
examine the cord of
and if its appearance indicates damage
unplug it, discontinue use of the
appliance, and have
replacement part by
Caution: The apparatus should not be
Periodically
the cord
replaced
with
an
exact
authorized servicer.
an
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed in
door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the
a
appliance.
SERIAL NUMBER:
You
can
find the serial number
This number is
unique
CAUTION: This
product employs
and retain this
Laser
System.
purchase.
To ensure proper use of this product,
please read this owner's manual carefully
Model No.
and retain for future reference. Should the
unit
require maintenance,
contact
an
authorized service center.
Use of controls, adjustments, or the
performance of procedures other than
herein may result in
hazardous radiation exposure.
those
specified
To
prevent direct exposure to laser beam,
do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE
INTO BEAM.
WARNING: Do not install this
confined space such
similar unit.
a
2
as a
equipment
bookcase
or
in
Serial No.
guide
the back of the unit.
to this unit and not available to
others. You should record
a
on
as a
requested information here
permanent record of your
______________________________
______________________________
Search............................16
Contents
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.
Introduction...................4
SymbolusedinthisManual..............4
AbouttheSymbolDisplay............4
NotesonDiscs........................4
HandlingDiscs......................4
StoringDiscs........................4
CleaningDiscs......................4
TypesofPlayableDiscs.................5
Regionalcode........................5
Disc-relatedterms.....................6
FrontPanel...........................7
RemoteControl........................8
RemoteControlOperation..............8
Remote Control Battery Installation
.8
.
InstallationandSetup...
.
.
.
.
.
..9
......
SettingupthePlayer...................9
DVDPlayerConnections................9
Video and Audio Connections to Your TV
AudioConnectiontoYourTV.
.
.
.
.
.
.
.
.
.
.
.
.
.9
.9
Optional Equipment .10
On-ScreenDisplay....................11
.11
Playback Status/Restrictions
InitialSettings........................12
GeneralOperation...................12
Audio Connection to
.
.
.
.
.
.
.
.
.
.
.16
.17
SlowMotion........................17
Random...........................17
RepeatA-B........................17
Repeat............................17
3DSurround......................17
TimeSearch........................17
Zoom...........................18
MarkerSearch...................18
Pause............................18
SpecialDVDFeatures.................18
Checking the contents of DVD discs: Menus .18
TitleMenu........................18
DiscMenu........................18
CameraAngle.....................18
.18
ChangingtheAudioLanguage
.
.
.
.
.
.
.
.
.
Subtitles.........................18
Playing
an
Audio CD
or
MP3/WMA Disc
.
.
.
.
.19
.
Audio CD and MP3 / WMA Disc Features
.20
.
Pause............................20
MovingtoanotherTrack..............20
RepeatTrack/All/Off.................20
Search...........................20
Random..........................20
.
.
.
.
.
.
.
.
.
.
?MenuLanguage...................12
.
.
.
.
.
.
.
.
.
.12
DISPLAY..........................12
?TVAspect.......................12
?DisplayMode.....................12
?ProgressiveScan...................13
AUDIO...........................13
?DolbyDigital/DTS/MPEG.
?SampleFreq.(Frequency).
Dynamic Range Control (DRC)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.13
.13
.13
OTHERS..........................14
?PBC............................14
?AutoPlay........................14
B.L.E. (Black Level Expansion)
.14
?DivX(R)VOD......................14
LOCK(ParentalControl)..............15
?Rating..........................15
.15
?Password(SecurityCode).
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3DSurround.......................20
.
LANGUAGE.......................12
?DiscAudio/Subtitle/Menu
RepeatA-B........................20
.
.
?AreaCode.......................15
ProgrammedPlayback................21
.21
RepeatProgrammedTracks
.21
Erasing a Track from Program List
.21
Erasing the Complete Program List
ViewingaJPEGDisc..................22
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow........................22
StillPicture.........................22
MovingtoanotherFile................22
Zoom.............................22
Torotatepicture.....................22
To listen to MP3/WMA music watching picture
.22
.
MaintenanceandService...............23
PlayingaDivXMovieDisc.............24
AdditionalFeatures...................25
LastSceneMemory..................25
ScreenSaver.......................25
VideoModeSetting..................25
.25
Controlling other TVs with the remote control
UsingtheKaraokedisc.................26
.
.
Reference....................27
LanguageCodes.......................27
AreaCodes...........................27
Operation....................16
PlayingaDVDorVideoCD.............16
PlaybackSetup...................16
Troubleshooting.......................28
Specifications.........................28
GeneralFeatures.....................16
MovingtoanotherTITLE..............16
.16
Moving to another CHAPTER/TRACK
.
.
.
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
This manual
provides
information
on
the
on
that
specific
DVD video disc.
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Notes
Symbol
Used in this Manual
Handling
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
Discs
on
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
of
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
making
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
the task easier.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
A section whose title has
is
applicable only
symbol.
DVD
4
to the disc
of the
following symbols
represented by the
one
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
DivX Discs
CD-G
CD-G Discs
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Types
of
Playable
Discs
Regional
code
This DVD
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
encoded DVD software. This unit
play only
Video CD
(VCD)
(8cm/12cmdisc)
Notes
Audio CD
?
(8cm/12cmdisc)
DVD discs labeled "4"
on
Regional
or
a
globe
visible
clearly
on
number must match your DVD
code or the disc cannot play.
addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, CD-G, and
CD-R / CD-RW that contains audio titles, MP3, WMA,
4
can
"ALL".
Codes
Most DVD discs have
numbers in it
"4"
with
the
one or more
cover.
This
player's regional
In
and/or JPEG files.
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
Do not
use
shaped
or
(the
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
Notes
on
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
Notes
Notes:
?
?
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
on
on
the TV
screen.
Copyrights:
It is forbidden
law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
by
material without
permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
Manufactured under license from
Dolby
Laboratories. "Dolby", "Pro Logic", "MLP
Lossless", and the double-D symbol are
trademarks of Dolby Laboratories.
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE
PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE 'STANDARD DEFINITION'
DTS and DTS
Digital Out
Digital Theater Systems,
are
Inc.
trademarks of
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
525p
AND
625p
DVD
PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
only
two standards for
are
media, meaning the DVD
content
can
be
erased and re-recorded.
VCD
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
with
quality
stereo sound.
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
MP3 is
popular compression format used for digital
files that yields very high near-CD quality.
a
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
Chapter (DVD video discs only)
A chapter is a segment of a title such
film
or one
interview in
a
series. Each
as a scene
chapter
in
a
is
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
Corp.
JPEG
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
Scene
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Track
A distinct element of audiovisual
information, such
as
the
DivX
DivX is the
name
which is based
on
of
a
revolutionary
the
new
using
this DVD
new
MPEG-4
standard for video.You will be able
movies
may not be recorded.
On
WMA
6
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
MP3
audio
CDs.
Title
(Video CD)
along
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
player.
video codec
compression
to play DivX
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
track of video
of audio.
(with multiple angles)
one
and several tracks
Front Panel
POWER
Switches the
player
ON and OFF.
PLAY(N)
Starts playback.
OPEN/CLOSE(Z)
Opens
STOP(x)
Stops playback.
Disc
or
closes the disc
tray.
Tray
Insert
a
disc here.
Remote Sensor
Point the DVD Player remote
control here.
Display
window
Shows the current
status of the
player.
Microphone volume control
Adjusts microphone volume.
Microphone jacks (MIC1, MIC2)
Connect a microphone to MIC1 or
MIC2
or
to both sockets.
7
Remote Control
OPEN / CLOSE
Opens
and closes the disc
Switches DVD
Player
TV Control Buttons
tray.
TV POWER:
POWER
Turns the TV
ON and OFF.
Selects TV's channel.
a menu.
TV VOL +/--:
CLEAR
Removes
track number
on
the
program list or a mark
MARKER SEARCH
on
the
a
or
TV's volume.
Adjusts
AV:
Selects the TV's
menu.
source.
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to
previous chapter or track.
SCAN(Q/R)
Search backward
off.
TV PR/CH +/--:
0-9 number buttons
Selects numbered items in
on or
forward.
PAUSE/STEP(X)
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
STOP(x)
Stops playback.
PLAY(N)
Starts playback.
TITLE
title menu, if available.
Displays
DVD MENU
Accesses
menu on a
RETURN
DVD disc.
Removes the
bBvV(left/right/up/down)
Selects
item in the
an
menu.
?
ENTER
Confirms
menu
?
Selects
an
audio
Selects
menu.
?
a
DVD
camera
angle
Accesses
or removes
setup
a
track
on
the program
list.
?
ZOOM
Enlarges
if
available
SETUP
PROGRAM
Places
?
?
Selects
MARKER SEARCH
?
language.
ANGLE
SEARCH
Displays
language (DVD).
subtitle
a
?
display.
SUBTITLE
point during
playback.
DISPLAY
AUDIO
MARKER
Marks any
selection.
Accesses On-Screen
menu,
the video CD with PBC.
displays
?
setup
?
video
image.
REPEAT
Repeat chapter, track, title,
?
menu.
?
A-B
Repeat
?
sequence.
RANDOM
Plays
?
all.
tracks in random order.
KARAOKE
Accesses
(ECHO)
KARAOKE
or removes
menu.
Remote Control
Remote Control
Operation
Point the remote control at the remote
sensor
Battery installation
Detach the battery cover on
and
press the buttons.
remote
AAA AAA
Do not mix old and
mix different
new
batteries and
types of batteries such
standard, alkaline, etc.
8
never
as
control, and insert
(size AAA)
with
and
the
two
rear
of the
batteries
aligned correctly.
Installation and
Setting
The
up the
Setup
Video and Audio Connections to Your TV
Player
and sound of
radio
nearby TV, VCR,
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
picture
a
or
Make
sure
the DVD
TV and not to
Video: Connect the VIDEO OUT
Player Connections
your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices
directly to the
DVD image could
a
to the video in
video cable
Depending
is connected
VCR, otherwise the
be distorted by the copy protection system.
player
DVD
player
jack
on
the
jack on the DVD
TV using the
(V).
S-Video: Connect the S-VIDEO OUT
jack
DVD
the TV
on
Player
to the S-Video in
the S-Video cable
Component
necessary for additional connection
information.
as
jack
on
the
on
using
(S).
Video
(Color Stream ):
Connect the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN
jacks on the DVD Player to the
corresponding in jacks on the TV using
cable (C).
an
Y Pb Pr
Progressive Scan (ColorStream pro):
If your television is a high-definition or
"digital ready" television, you may take
advantage of the DVD Player's progressive
scan output for the highest video resolution
possible.
If your TV does not accept the Progressive
Scan format, the picture will appear
scrambled if you try Progressive Scan on
the DVD Player.
?
?
Notes:
?
Set the
Progressive to "On" on the setup
progressive signal, see page 13.
?
Set the
progressive
to "Off"
by removeing
from the unit and close the disc
disc" is
see
for
any disc
that "no
window. Then press
STOP and hold it for five seconds before releasing
displayed
on
the
tray.
menu
display
it.
?
Progressive
scan
video connections
does not work with the
(yellow
VIDEO OUT
analog
jack).
Audio Connection to Your TV:
Connect the left and
DVD
right
AUDIO OUT
jacks of the
right IN jacks on the
Player to the audio left and
TV (A) using the audio cables. Do not connect the
DVD Player's AUDIO OUT jack to the phone in jack
(record deck) of your audio system.
9
Audio Connection to
Connect the DVD
for audio
player
Optional Equipment
to your
optional equipment
output.
Rear of DVD
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier,
receiver, or stereo system, using the audio cables (A).
Amplifier equipped with 2-channel digital stereo
(PCM) or audio / video receiver equipped with a
multi-channel decoder (Dolby DigitalTM, MPEG 2,
or DTS): Connect one of the DVD Player's DIGITAL
AUDIO OUT jacks (COAXIAL X) to the corresponding
in jack on your amplifier. Use an optional digital
(coaxial X) audio cable.
player
Digital Multi-channel
A digital multi-channel
sound quality. For this
/ video receiver that
X
sound
connection
provides
you need
multi-channel audio
supports
a
one or more
the best
of the
audio formats
supported by your DVD player such as
MPEG 2, Dolby Digital and DTS. Check the receiver
manual and the logos on the front of the receiver.
A
Notes:
If the audio format of the
?
match the
COAXIAL
DIGITAL INPUT
R
L
produces
AUDIO INPUT
?
Amplifier (Receiver)
does not
of your receiver, the receiver
distorted sound or no sound at all.
capabilities
a
strong,
Six Channel
Digital Surround Sound via a digital
connection can only be obtained if your receiver
equipped with a Digital Multi-channel decoder.
?T
o see
is
the audio format of the current DVD in the
on-screen
10
digital output
display,
press AUDIO.
On-Screen
You
Display
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
can
the
display
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
inputting
the
change
the title
Chapter
highlighted.
number).
For
some
also
functions,
no
the
button is
on-screen
provide
all of the features
pressed for 10 seconds,
display disappears.
Playback Status/Restrictions
Repeat title
Repeat
Number
1/12
Enter
a
0:20:09
b/Bor
AUDIO
language
ABC
1 ENG
SUBTITLE
Angle
InstaliodSeup
b/Bor
1/3
ANGLE
Sound
3D SUR
b/B
Selection Method
Marker
menu
(or
PBC
1/3
play
from this
prohibited
or
point
not available
(Video
b /
B,Numbers
ENTER
mode)
Time search
Action
b/Bor
sequence
Marker Search
Resume
Numbers, ENTER
language
and Digital Audio
Output mode
Track Number
MARKER SEARCH
B,Numbers
ENTER
Items
1/9
b /
Example: On-Screen Display during
playing VCD or CD-G
Title
A-B
B,Numbers
Audio
Subtitle
Some discs may not
shown below.
If
b /
setting.
Notes:
?
1/3
Time search
setting. You can
appropriate (e.g.
press ENTER to execute the
?
Title Number
ENTER
item.
the number buttons if
use
Selection Method
Items
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing DVD Video
CD
Numbers
0:20:09
only)
ENTER
b/Bor
Audio Channel
AUDIO
Sound
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Selection Method
Items
Track Number
1/3
b /
B, Numbers
ENTER
Time search
0:20:09
Audio
language
and Digital Audio
Output mode
Subtitle
Sound
language
b/Bor
1
MP3
ABC
Numbers, ENTER
ENG
AUDIO
b/Bor
SUBTITLE
3D SUR
b/B
11
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 12 to 15.
To
display
Menu
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
and exit the Menu:
Press SETUP to
display
the
Move
Select
A second press of
menu.
SETUP will take you back to initial
screen.
To go to the next level:
Press B on the remote control.
Menu
Language
Select
a
language
for the
Setup
menu
and
display.
To go back to the previous level:
Press b on the remote control.
Disc Audio / Subtitle / Menu
DVD
Select the
General
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Operation
Press SETUP. The
1.
Setup
menu
Use v / V to select the desired
2.
B to
move
alternate
appears.
then press
to the second level. The screen shows
the current
setting for
setting(s).
option
the selected
item,
Use v / V to select the second desired
3.
press B to
move
as
well
option
as
then
then press
ENTER to confirm your selection. Some items
require additional steps.
Press SETUP
5.
or
Original:
Refers to the
disc
recorded.
was
original language
track
in which the
Other: To select another
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
to the third level.
Use v / V to select the desired
4.
on-screen
setting
PLAY to exit the
Setup
DISPLAY
DISPLAY
TV
Display
menu.
16:9
Aspect
Mode
Progressive
Widescreen
Scan
Off
Note:
If
a
CD-G disc is
available
TV
only
inserted, SETUP operation is
when the CD-G
menu
appears
on
the
screen.
Move
TV
DVD
Aspect
4:3: Select when
a
16:9: Select when
Display
Display
Select
Mode
Mode
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
DVD
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox:
upper and
12
bands
on
the
Automatically displays the wide picture on
screen and cuts off the portions that do not fit.
Panscan:
entire
Displays a wide picture with
lower portions of the screen.
the
Progressive Scan
AUDIO
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
Each DVD disc has
variety of audio output options.
player's AUDIO options according to the type
Set the
of audio
system you
progressive
scan:
Connect
component out of the DVD player to the input
of your monitor/television, set your television or
monitor to
1. Select
use.
AUDIO
On.
To active
a
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48 KHz
DRC
On
Component Input.
"Progressive
Scan"
on
the DISPLAY
Move
menu
Select
then press B.
Dolby Digital
DISPLAY
TV
Mode
Progressive
InstaliodSeup
DivX
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
Aspect
Display
DVD
/ DTS / MPEG
Scan
On
other
Off
MPEG decoder.
PCM
Prev.
Move
equipment
with
Dolby Digital,
a
DTS
or
MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
Enter
(for Dolby Digital
/
audio.
2. Select "On"
using
the v / V buttons.
.
Off
not
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Sample Freq. (Frequency)
Note:
If your TV or monitor does not accept the Progressive
Scan format, the picture will appear scrambled if you
try Progressive Scan
4. When the confirm
on
the DVD
menu
Cancel is
buttons
5.
player
mode.
Once the
setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
First, remove the disc in the DVD Player.
the standard
on a
setting,
and
conventional
picture will once again
analog TV or monitor.
a
to
be
processing.
Check the documentation for your
its capabilities.
Dynamic Range
Caution:
visible
made, this unit automatically converts any 96 kHz
signals to 48 KHz so your system can decode them.
made, this unit passes each type of signal through
Progressive
Next, press STOP ( x ) and hold it for five seconds
before releasing it. The video output will be restored
DVD
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 KHz. When this choice is
without any further
to
is
If your receiver or amplifier is capable of handling
96 KHz signals, select 96 KHz. When this choice is
highlighted as
to highlight Enter.
Pressing
scan
Player.
appears on your screen
default. Use the b / B
ENTER will set the
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
DVD
Control
amplifier
to
verify
(DRC)
DivX
With the DVD
format, you
can
hear
a
program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
13
B.L.E.
OTHERS
The
can
Auto
PBC,
be
Play,
changed.
B.L.E. and
DivX(R)
VOD
settings
PBC
Auto
Expansion)
preference
and monitor's
Expanded
playback pictures.
ability.
grey scale.
Off: Standard grey scale.
On
IRE cut
(0
(7.5
Set your
off)
IRE cut
off)
Off
Play
B.L.E.
DivX(R)
Level
To select the black level of
On:
OTHERS
(Black
On
VOD
DivX(R)
Select
You
VOD
DivX
display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
Move
PBC
Set
Select
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
are
or
Off.
played according
The
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
to the PBC.
Off: Video CDs with PBC
way
can
as
are
played
the
same
encrypt movie file.
Audio CDs.
Notes:
Auto
You
Play
DVD
set up the DVD Player so a DVD disc
automatically starts playing whenever the DVD is
can
If you rent the DivX VOD file, it has several
viewing limits as shown below.
?
Display
the number which you
inserted.
If Auto
Play
mode is set to
On, this DVD player will
search for title that has the
then
play
back the title
longest playback
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
time and
?
Note:
The Auto
Play
function may not work for
some
expired.
DVDs.
?
14
The rental has been
Display
the authorization
error.
can
options
watch the file.
of
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Area Code
US
(Security Code)
enter
can
2. Follow
step
Input
Move
as
shown left
4-digit code,
again to verify.
it
new
DVD
for children to view.
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
more
suitable
scenes as an
If you
control feature allows you to block
to scenes below the rating you input, thereby
then press ENTER.
menu.
forget your Security Code
1.
Press SETUP to
2.
Input
3.
the
6-digit
display
the
can
Setup
clear it
using
InstaliodSeup
menu.
number "210499" and the
Enter
a new
code
your children from being able to view
material you believe is unsuitable.
Area Code
1. Select
Enter the code of the
preventing
"Rating"
on
the LOCK
menu
then
the reference
the
Rating, Password and Area Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
a
from 1 to 8
using
1.
security
restrictions
described above.
DVD
area
whose standards
on
the list in
chapter.
Select "Area Code"
on
the LOCK
menu
then press
2.
Follow
3.
Select the first character
4.
Press ENTER and select the second character
using
the v / V buttons.
Rating one (1) has the most
and rating eight (8) is the least
disc, based
were
B.
5.
1-8:
as
used to rate the DVD video
press B.
Rating
or
code is cleared.
parental
3. Select
then press B.
(Rating). "Change"
If you forget your security code you
the following steps:
alternative.
2. To
menu
Select
4. Press SETUP to exit the
Some movies contain
access
2
the LOCK
on
highlighted.
3. Enter the
The
change password.
1. Select Password
"New" is
Rating
or
step
2
as
shown left
(Rating).
using
v / V buttons.
v / V buttons.
Press ENTER to confirm your
area
code selection.
restrictive.
Unlock
If you select
and the disc
unlock, parental control is
plays
not active
in full.
Note:
If you set
the same
scenes
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
15
Operation
Playing
a
DVD
or
General Features
Video CD
Note:
Unless stated
Playback Setup
Turn
1.
on
the TV and select the video
connected to the DVD
Turn
2.
the
on
the audio
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
playback
side down.
tray.
In
some
Moving
to another TITLE
When
disc has
cases, the disc
menu
might
a
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu
stopped
When
title
a
disc has
another
operating
"PBC"
on
page
?
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 15.)
player.
(four).
your
The
region
code for this
player
is 4
track, you
one
chapter/track
Press SKIP .
chapter
can move
or a
to
follows:
as
or
>
briefly
to
step back
to
to the
previous chapter/track.
o
go
directly
to any
chapter during
DVD
playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
numberoruseb/B.
Search
1.
Press SCAN
2.
Press SCAN
(m
or
M) during playback.
(m
required speed.
or
M) repeatedly
DVD, DivX disc; X2, X4, X16
Video CD; X2, X4 or X8
3.
To exit SEARCH
Changing
different
or
to select the
X100
mode, press PLAY.
the Audio Channel
Press AUDIO
16
one
Press SKIP . twice
If
DVDs may have a region code. Your player does
not play discs that have a region code different from
than
than
?
Notes:
?
more
more
briefly during playback
select the next chapter/track or to return to the
beginning of the current chapter/track.
?T
14).
disc has
on a
?
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
(See
its number while
can
to another CHAPTER/TRACK
procedures
Off
b /
to another title.
Moving
Use the number buttons to select the track you
want to view and press RETURN to return to the
and
to
can move
playback is
appropriate number (0-9) or use
then the
move
screen.
settings
title, you
one
appear
Use the bBvVbuttons to select the
Menu
than
play any title by inputting
playback is stopped.
instead:
menu screen.
more
another title. Press DISPLAY while
You
Press PLAY.
use
the remote control. Some features may also be
available on the Setup menu.
B to
Press OPEN/CLOSE to close the
4.
otherwise, all operations described
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
Still Picture and
Frame-by-Frame Playback
Repeat
You
1.
2.
Press PAUSE/STEP
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
on
Press
DVD Video Discs
mode, press PLAY.
Press PAUSE/STEP
The DVD
2.
player
?
Use the SCAN
(X) during playback.
will
now
(m
to select the
speed: t 1/16, t 1/8, t 1/4, or t
(backward), or T 1/16, T 1/8, T 1/4,
(forward).
With
DivX Disc and Video
a
changes: T 1/16,
(forward).
3.
T
To exit Slow Motion
required
T 1/2
or
mode, press PLAY (N).
playback
in
reverse
is not
with
possible
Video CDs and DivX Discs.
The unit
during playback.
automatically begins random playback
2.
Press RANDOM
on
the TV
again
and
1.
3.
All
?
Off
repeats all the tracks
:
does not
:
play repeatedly.
?
If you press SKIP
(>)
(Track) playback,
the
To
produce
a
during Repeat Chapter
repeat playback cancels.
once
3D surround effect that simulates multi-
1.
Press DISPLAY
2.
Use 3
to normal.
3.
or
during playback.
4 to select the sound
option
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
effect, select "Normal".
Time Search
To start
menu
to
"PBC"
on
use
PBC, You
must set PBC to Off
on
the
1.
page
14).
2.
at any chosen time
on
Press DISPLAY
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon
and "-:--:--" appears.
3.
a
playing
box shows the
the random function
A-B
repeat
disc.
on a
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 14).
Press A-B at your chosen
appears briefly on the TV
starting point.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
the
required
start time in
"
A
*
end
"
point.
screen
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
screen.
Press A-B
Press A-B
Input
seconds from left to
sequence.
4.
2.
?
The sound
during random playback, the unit
(track) and resumes random playback.
Video CD with
Repeat
To
play repeatedly.
?
screen.
Note:
(See
does not
:
SKIP >
selects another title
setup
Off
current title.
To turn off the 3D Surround
By pressing
a
?
repeats the
Notes:
Tip:
On
Title:
speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
Press RANDOM
RANDOM appears
?
channel audio from two stereo
Random
1.
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
-
3D Surround
Note:
Slow motion
desired
1/2
T 1/2
or
a
-
CD, the Slow speed
1/8, T 1/4
disc.
Video CDs, DivX discs Repeat Track/All/Off
?
Track : repeats the current track
go into PAUSE mode.
M)
or
title/chapter/all/track on a
REPEAT during playback to select
a
repeat mode.
Slow Motion
1.
play
can
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
and the
to cancel.
17
Zoom
Use
to
zoom
Press ZOOM
1.
the video
enlarge
image.
during playback
still
or
playback
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
1600% size
fit mode
screen
→
→
the
can
the contents of DVD discs: Menus
bBvVbuttons to
the way the
when
image appears on
you're playing a DVD movie.
Press 3/4 to select between
Use the bBvVbuttons to
zoomed
4.
To
1.
Normal, Enhanced,
move
through
2.
the
Press TITLE. If the current title has
appears
menu
may appear.
normal
playback,
The
menu
on
the
menu
screen.
press CLEAR.
3.
menu, the
Otherwise, the disc
offers features such
spoken language and
chapters for the title.
picture.
resume
your selection.
Then press ENTER.
and Maximum.
3.
highlight
Title Menu
change
screen
Checking
100% size
Screen fit mode:
You
DVD Features
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU. Input the corresponding number or use the
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
Special
subtitle
a
angles,
as camera
options,
and
Press TITLE to exit.
Notes:
Zoom may not work
?
?
on some
DVDs.
Screen fit mode is available for
Disc Menu
playing
the DVD disc and
Press DVD MENU and the disc
movie file.
Press DVD MENU
menu
is
displayed.
to exit.
again
Marker Search
Camera
To enter
You
Marker
a
start
can
If the disc contains
from up to nine memorized
marker, press MARKER at the
playback
To enter
points.
desired
point
the TV
screen
a
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
1.
2.
or
Clear
During
disc
search
menu
Within 10
a
on
press SEARCH. The marker
appears on the screen.
playback,
seconds, press
Press ENTER and
marked
scene.
b / B to select
playback
or
a
marker
You
on
Tip:
The
indicator will blink
angle
recorded at different
switching
is
angles
on
the TV
as an
during scenes
that angle
screen
indication
possible.
starts from the
Changing
the Audio
Language
Or, Press CLEAR and the marker
any marker by
the marker search menu.
can
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
clear.
number is erased from the list.
4.
recorded at different
Marked Scene
number that you want to recall
3.
scenes
camera
markers.
To Recall
Angle
play
inputting
Press AUDIO
its number
different
repeatedly during playback
audio language or audio track.
to hear
a
Subtitles
Pause
1.
2.
Press PAUSE/STEP
To return to
during playback.
playback,
press PLAY.
Press SUBTITLE
the different
repeatedly during playback
subtitle languages.
to
see
Notes:
?
The subtitle file of the DivX file is
smi,
?
srt and sub.
If there is
no
information
read in the DivX
18
displayed only
file,
"
1
or
"
there is
etc
are
a
code that
displayed.
can
not
Playing
Audio
an
CD,CD-G discs
The DVD
MP3/WMA
in
file list
a
Press DVD MENU to
?
On
on
the v / V to
use
move
top of the
MP3 / WMA disc
PLAY
limited
starts.
menu
and want to
and
highlight
to the next page.
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
playback
the MUSIC
a
PHOTO word
ENTER and
list,
?
Audio CD
or
on
press ENTER.
can
CD-RW discs.
or
are
return to the Folder
play Audio CD, CD-G discs and
formatted recordings on CD-ROM, CD-R,
player
If you
?
MP3/WMA Disc
or
Tips:
?
AUDIO CD
as
is
menu
compatibility
highlighted.
with this
player
is
follows:
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
0:52:07
1/12
List
?
Program
Track1
-
Track2
Track3
?
Track4
Track5
Track6
Track7
?
Clear All
Track8
PROGRAM
?
Edit
CD-G discs
Once you insert a CD-G disc, a menu appears on the
TV screen. Press v / V to select a track then press
PLAY
To
or
ENTER and
display
-
the CD-G
starts.
playback
menu during playback,
creates
?
File
an
names
and must
press
STOP twice.
?
They
ISO 9660 file
system.
should have
a
incorporate
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
CD-G
?
0:52:07
The total number of files
on
Operation
the disc should be
1/12
List
less than 650.
Program
Track1
Track2
This DVD
Track3
Track4
Track6
Clear All
Track8
PROGRAM
Edit
2.
these
Press v / V to select
a
folder, and press ENTER
the folder contents.
Press v / V to select
ENTER.
to
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MP3 / WMA
see
recordings
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
Track7
to
discs and
meet certain technical standards in order to achieve
Track5
1.
player requires
Playback
a
Customers should note that
track then press PLAY
or
required
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
starts.
MUSIC
0:00:00
require certain pre-existing conditions (see
above) to ensure compatible playback.
should
1/12
List
Program
always
be
sought
from the
copyright
owner.
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
Clear All
7-Music7
DISPLAY
Info
PROGRAM
Edit
ID3 TAG
?
When
playing
a
file
containing
information such
as
track
titles, you can see the information by pressing DISPLAY.
[ Title, Artist, Album, Year, Comment ]
?
If there is
no
information, "NO ID3 TAG" appear
on
the
display.
19
Audio CD and MP3 / WMA Disc
Random
Features
1.
Press RANDOM
during playback.
Playback begins immediately and
appears
Pause
1.
2.
Press PAUSE/STEP
the
on
RANDOM
menu screen.
To return to normal
until
repeatedly
during playback.
Random
playback, press RANDOM
RANDOM disappears from the
menu screen.
2.
To return to
press
playback, press PLAY,
PAUSE/STEP again.
ENTER
or
Tip:
By pressing
Moving
1.
to another Track
Press SKIP
(.
>) briefly during playback
track or to return to the beginning
or
Press SKIP . twice
previous
3.
You
Repeat
can
any track
Repeat
by inputting
To
2.
Press A-B
1.
can
a
its number.
track/all
on a
Press REPEAT when
disc.
playing
?
?
again
point.
The
a
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
disc. The
menu screen.
repeat
Track:
a
desired
repeat mode.
the current track
repeats
All: repeats all the tracks
Off(No display):
does not
on a
disc.
play repeatedly.
To
If you press SKIP (>) once
the repeat playback cancels.
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
1.
Note:
Press AUDIO
during Repeat Track playback,
2.
1.
Press SCAN
2.
Press SCAN
(m or M) repeatedly to select the
required speed: X2, X4, X8 backward or forward.
3.
To exit SEARCH
(m
or
M) during playback.
mode, press PLAY.
on
the
menu screen.
To return to normal
until
menu screen.
Search
during playback.
"3D SUR." appears
repeatedly
20
at your chosen end
3D Surround
Press REPEAT to select
?
a
repeatedly.
icon appears.
2.
sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
repeat
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Track/All/Off
play
resumes
playback, the unit
random playback.
Repeat
3.
You
random
A-B
1.
to go back to the
briefly
track.
play
during
selects another track and
to go to the next
of the current track.
2.
SKIP >
playback, press AUDIO
"3D SUR." disappears from
the
5.
Programmed Playback
1.
contain 30 tracks.
can
Insert
list have
To
normal
resume
select
played
track of
a
on
in
the
once.
playback
Repeat Programmed
1.
from
programmed
AUDIO CD (or MUSIC)
mark will appear to the right of the word
"Program" on the right side of the menu screen.
Press REPEAT when
2.
Note:
?
Press PROGRAM
again,
to exit the
Edit mode.
then the
mark will
1/12
List
E
disc. The
repeat
Tr ack5
2-Music2
Tr ack2
Tr ack7
1-Music1
4-Music4
Tr ack3
Tr ack4
2-Music2
6-Music6
Tr ack4
Tr ack1
3-Music3
1-Music1
Tr ack5
4-Music4
Tr ack6
5-Music5
Tr ack7
6-Music6
Clear All
DISPLAY
Audio CD Menu
desired
repeat mode.
repeats the current track
All: repeats all the tracks on programmed list.
Off(No display):
does not
play repeatedly.
PROGRAM
Info
Erasing
Edit
during Repeat
Track
playback,
the
"Program"
List
2.
Press CLEAR.
on
The program menu appears. Press
PROGRAM again and hold it down for a few
Track from
Use vVBto select the track that you wish to
erase from the Program list.
is
playback
a
1.
MP3/WMA Menu
Video CD: Press PROGRAM while
once
repeat playback cancels.
Clear All
7-Music7
PROGRAM Edit
a
Track:
If you press >
E
Program
Tr ack1
Tr ack8
a
Note:
0:00:00
1/12
?
disappear
MUSIC
AUDIO CD
Program
playing
Press REPEAT to select
?
Program
Tracks
icon appears.
The
List
Playback begins
programmed the tracks.
list and then press PLAY.
Press PROGRAM.
0:52:07
ENTER to start.
"Program"
playback,
Audio CD, CD-G or MP3/WMA Discs:
AUDIO CD, CD-G or MUSIC menu appears.
2.
6.
disc.
a
or
the order in which you
Playback stops after all of the tracks
The program function enables you to store your
favorite tracks from any disc in the player memory. A
program
Press PLAY
Repeat
to
erase
additional tracks
the list.
Operation
stopped.
seconds to exit the
Erasing
menu.
Note:
On
a
setup
page
Video CD with
menu
to
use
PBC, you
the
must set PBC to Off
on
the
"PBC"
programmed playback (See
the
Complete Program
1.
Press B to
2.
Use v / V to select "Clear
move
to the
List
"Program"
list.
All", then press ENTER.
on
Note:
14).
The programs
are
also cleared when the disc is removed.
CD-G
VIDEO CD
0:52:07
List
E
Program
1/12
List
E
Program
Track1
Track5
Track1
Track5
Track2
Track2
Track2
Track7
Track3
Track3
Track3
Track4
Track4
Track1
Track4
Track1
Track5
Track5
Track6
Track7
Clear All
Clear All
Track8
PROGRAM
Video CD Menu
3.
Select
a
track
on
the
Edit
CD-G Menu
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
playing
on
the
21
Viewing
this DVD
Using
JPEG Disc
a
Player
view discs with JPEG
you
can
files.
1.
Insert
disc and close the
a
on
appears
the TV
JPEG
Zoom
tray. The PHOTO
menu
screen.
Use
zoom
(see
page
To rotate
enlarge
18)
picture
photo image.
JPEG
picture
Press v / V
PHOTO
the
to
during showing
clockwise
or
to rotate the
picture
a
counter clockwise.
Preview
List
To listen to MP3/WMA music
JPEG Folder 1
JPEG Folder 2
watching picture
JPEG Folder 3
JPEG
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
You
JPEG Folder 7
can
JPEG Folder 8
display
files while
music files recorded
1.
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
and press ENTER.
highlight
3.
on
If you want to view a particular file, press
v / V to highlight a file and press ENTER
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Press DVD MENU to
?
There
?
move
or
Press TITLE to
3.
Press v / V to select
4.
Use B to select
top
of the
disc.
the two
types of file in
display
a
PHOTO
photo
menu.
file.
icon then press ENTER.
starts. The playback will continue until
pressed.
Tip:
to
move
To listen to
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
to the next page.
JPEG disc
limited
is
menu
compatibility
with this
player
is
follows:
as
to
?
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
on
containing
2.
a
PHOTO word
same
PLAY.
:
Speed options
>>>
(Fast), >> (Normal), and > (Slow).
Use vVbBto highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
On
the
to MP3/WMA
player.
STOP is
three Slide
are
the
Playback
Tips:
?
Insert the disc
on
listening
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an on-
Depending
screen
highlighted.
display
after several
minutes,
some
of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
---
?
Press
RETURN, information of file is hidden.
2048
Slide Show
JPEG
?
Use vVbBto
highlight
the
(Slide Show)
Still Picture
1.
The
player
will
now
during
Ensure that all the selected files have the
slide show.
PAUSE/STEP
show, press PLAY
extensions when
or
press
?
Moving
Press SKIP
JPEG
(. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
22
copying
into the CD
".jpg"
layout.
If the files have
rename
again.
to another File
the disc
?
go into PAUSE mode.
To return to the slide
on
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
2.
The total number of files and folders
?
JPEG
Press PAUSE/STEP
and burn another disc.
should be less than 650.
then
press ENTER.
pixels
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
player.
JPEG image
Even
though
files in
Maintenance and Service
Refer to the information in this
contacting
a
Please
before
service technician.
the Unit
Handling
When
chapter
shipping
the unit
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping
the exterior surfaces clean
Do not
?
the
save
spray
use
near
volatile
liquids
insecticide
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
Cleaning
as
the unit.
Do not leave rubber
?
such
on
the unit
To clean the
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
use.
contact your nearest authorized
service center.
23
Playing
a
DivX Movie Disc
DivX disc
as
this DVD
Using
Insert
1.
a
appears
Player
you
can
disc and close the
on
the TV
play
compatibility
with this
player
is limited
follows:
DivX disc.
?A vailable resolution size of the DivX file is under
tray. The MOVIE
menu
720x576
screen.
?
MOVIE
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
Movie Folder 3
If there is
impossible code to
file, it may be displayed as
display.
"
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
express in the DivX
mark on the
"
_
Movie Folder 8
?
If the number of the screen frame is
over
30
per 1 second, this unit may not operate
Press v / V to select
2.
a
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
normally.
folder, and press ENTER.
the remote to
?
file is not
and
highlight
?
If you want to view a particular file, press
v / V to highlight a file and press ENTER
If the file is recorded with
or
PLAY.
*
?
On
?
a
CD with
highlighted.
The disc subtitle may not be displayed properly, if
subtitle is downloaded through the internet.
If the disc subtitle
subtitle
setup
menu
a
DivX
encoders, like DivX
There
are
called
1-point, 2-point,
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
is
?
move
Playable
or
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
does not have the DivX
language you are going to play, the
language may not be displayed properly.
subtitle
Playable Audio format
z "Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
?
-
-
?
-
-
24
GMC, the unit
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
Tips:
Press DVD MENU to
audio is
GMC?
MPEG4
?
or
supports only 1-point of the record level.
Press STOP to exit.
4.
interleaved, either video
outputted.
press ENTER.
3.
If the video and audio structure of recorded
".
Controlling
Additional Features
Last Scene
This
player
source, and
power switch of your LG TV with the supplied remote
control.
Memory
memorizes last
that is viewed. The last
scene
from the last disc
remains in memory
the disc from the player or switch
scene
if you remove
off the player. If you load
even
memorized, the
scene
is
a
disc that has the
scene
You
can
control the sound
level, input
You
can
control the sound
level, input
power switch of non-LG TVs as
listed in the table below, set the
player
recalled.
automatically
1.
does not memorize the
player
before
disc if you
to play the disc.
scene
commencing
of
holding
down TV POWER
button, press the
appears when you leave the DVD
mode for about five minutes. If the
screen saver
in
Stop
displayed
Player automatically turns
Video Mode
for five
minutes, the DVD
With certain
discs, the playback picture may be
flickering
Dot Crawl is shown
That
means
below).
Release TV POWER button.
Vertical
If
more
them
than
one
one
at
a
code number is
listed, try entering
time until you find the
one
that works
with your TV.
itself off.
Setting
or
2.
the table
(see
Code numbers of controllable TVs
Screen Saver is
?
While
for your TV
a
Screen Saver
player
appropriate
number buttons to select the manufacturer code
switch off the
The
source, and
well. If your TV is
manufacturer code.
Note:
This
other TVs with the remote control
on
interpolation
or
straight
lines.
De-interlace is
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
(Default),
2
not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
?
To
the video
change
MODE1
?
→
change
MODE2
→
during
Depending
on
function
the
on
your
TV,
TV,
all buttons may not
after entering the correct
some or
even
manufacturer code.
disc
playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
Video mode
?
mode, press and hold
DISPLAY about 3 seconds
?
Notes:
?
If you enter a new code number, the code number
previously entered will be erased.
?
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the
appropriate
code number
again.
sequence:
MODE3
→
MODE1
If you turn off the power, the video mode will be
back to initial state (MODE1).
Tip:
Detailed
MODE1: The
or
video
for Video Modes
material of the DVD video (film
Descriptions
source
material)
material
is determined from disc information.
MODE2: Suitable for
playing film based content or video
based material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with
comparatively little motion.
Note:
The video mode
Progressive
setting only
works when the
Scan mode is set to "On" in the
Setup
menu.
25
Using
VOICE: If you wish to sing a duet with the
recorded karaoke singer, select a voice you
the Karaoke Function
1.
Load
2.
Set the MIC VOL control to the minimum level to
a
karaoke disc.
desire.
prevent acoustic feedback (e.g.
sound)
before
Connect
3.
a
connecting
microphone
loud
howling
microphone.
the
a
V1
Voice1
Voice1
V2
Voice2
Voice2
V1+V2
Voice1
Voice2
Off
None voice
None voice
to MIC socket.
Note:
If
a
microphone
is not connected the karaoke
menu
will not
appear.
4.
5.
EFFECT: You
Press PLAY to start
Adjust
Press KARAOKE
6-
an
display changes
as
or
HARMONY
→
KEY: You
can
→
FLANGE
change
the
→
CHORUS
the
key by pressing
Note:
desired item
MELODY, VOICE, EFFECT
the
pressed,
1/2 buttons.
appears.
Use 3/4 to select
The
sing song.
option follow steps
Off
a
during playback.
menu
Special Effects. Each time
Special Effect changes as
can use
shown below.
MIC VOL control and then
KARAOKE
7.
1/2 is
playback.
If you want to set KARAOKE
8.
6.
Output
Left speaker
Right speaker
Voice Select
(ECHO,
KEY).
shown in the chart below.
Controlling the key
amplifier (receiver)
when DVD
player
is connected to
with
mute the sound of the
digital audio connection, may cause
front left/right speakers connected with
amplifier (receiver).
In that case, you must change the sound mode of the
amplifier (receiver) for the output of the speakers.
9.
Press KARAOKE to exit the KARAOKE
menu.
Notes:
?
The
?
The karaoke feature functions
microphone may
playback. (ex. slow)
compatible
?
For
only
during special
with karaoke-
discs.
The VOICE and MELODY
some
?
not be available
menus
may not be available
karaoke discs.
more
details, refer
to the information
supplied
with the
disc.
?
There is
encoded
8.
Use 1/2 to
adjust
value of the item
selected.
ECHO: You
pressing
can
adjust
the echo volume
by
the 1/2 buttons.
MELODY: If you wish to sing only to the backing
band or orchestra unaccompanied by a vocal
guide melody,
26
set MELODY to Off.
on
microphone's sound output during
with DTS is playing back.
no
a
disc
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
code from this list.
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Afghanistan
Argentina
Czech
Republic
AF
Area
SG
SK
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
27
Tr oubleshooting
Possible Cause
Symptom
Correction
No power.
?
The power cord is disconnected.
?
Plug the power
securely.
The power is on, but
the DVD player does
?
No disc is inserted.
?
Insert
picture.
(Check
that the DVD
audio CD indicator in the
not work.
No
disc.
a
cord into the wall outlet
The TV is not set to receive DVD
?
?
lit.)
Select the
appropriate
mode
signal output.
The video cable is not connected
?
window is
or
display
video
input
the TV.
on
?
Connect the video cable
?
Select the correct
securely.
securely.
No sound.
The
?
equipment
connected with the
audio cable is not set to receive DVD
audio receiver
?
?T
The AUDIO
?
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
?
The DVD
not start
does
Insert
player
playback.
An
options
position.
are
set to the
disc is inserted.
unplayable
urn on
The
rating
level is set.
The remote control
the remote
properly.
sensor on
the
pointed at
DVD player.
DVD
rating
disc.
rating
function
or
change
level.
Point the remote control at the remote
?
sensor
The remote control is too far from the
?
(Check the disc
system, and regional code.)
playable
a
Cancel the
?
The remote control is not
connected with
Set the
the
?
equipment
the audio cable.
type, color
?
does not work
the
so
The power of the equipment connected
with the audio cable is turned off.
wrong
?
mode of the
you can listen to the
sound from the DVD player.
signal output.
?
input
?
player.
of the DVD
player.
Operate
the remote control closer to
the DVD
player.
Specifications
DIGITAL OUT
General
Power
requirements:
AC 110-240 V
Power
consumption:
8W
,
(COAXIAL):
0.5V(p-p),75Ω,RCAjackx1
50/60 Hz
System
Dimensions
Laser:
(Approx.):
430x35x242mm(WxHxD)withoutfoot
Weight (Approx.):
1.9
Semiconductor
5 % to 90 %
CD:8Hzto20kHz
More than 100 dB
75 Ω, sync
negative,
RCA jack
x
1.0 V
OUT connectors
only)
Dynamic range:
75 Ω,
(Y)
(p-p),
negative
(C)0.3V(p-p)75Ω
sync, Mini DIN
4-pin
x
1
More than 95 dB
(DVD/CD)
Accessories:
Video cable
COMPONENT VIDEO OUT:
(Y)
(Pb)/(Pr)
(ANALOG
Harmonic distortion: Less than 0.008%
1
S-VIDEO OUT:
1.0 V
ratio:
Signal-to-noise
VIDEO OUT:
(p-p)
nm
Frequency response:
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
Outputs
1.0 V
650
NTSC
Signal system:
kg
Operating temperature:
5°Cto35°C(41°Fto95°F)
Operating humidity:
laser, wavelength
(p-p),
Ω,negative sync, RCA
0.7 V (p-p), 75 Ω, RCA jack x 2
75
jack
x
Batteries
1
(1),
Audio cable
(1),
Remote control
(1),
(2)
AUDIO OUT:
2.0Vrms(1KHz,0dB),600Ω, RCAjack(L,R)x1
Note: Design and specifications
are
subject
to
change prior
notice.
P/NO
28
:
3834RD0049W
DK9713CNM_HA4CLL_SPA
REPRODUCTOR DE DVD
MANUAL DEL USUARIO
MODELO
:
DVK-9713N
Antes de conectar, operar o ajustar este producto, lea detenida y
completamente este folleto de instrucciones.
CUIDADOS
PRECAUCION
relacion
en
con
el cable de
alimentacion.
Se recomienda colocar la
de los aparatos
circuito dedicado.
mayoria
CUIDADO: ESTAS INSTRUCCIONES DE
electrodomesticos
MANTENIMIENTO SON
Es decir, un circuito con un unico enchufe para operar
unicamente este aparato electrodomestico y no con
enchufes o circuitos derivados adicionales. Revise la
pagina de especificaciones de este manual del
usuario.
EXCLUSIVAMENTE PARA USO DEL
PERSONAL DE SERVICIO CALIFICADO.
PARA REDUCIR EL RIESGO DE CHOQUE
ELECTRICO,
NO LLEVE A CABO
en un
Cuidado: El aparato no debe exponerse
al agua (goteo o salpicaduras) y no debe
No sobrecargue los enchufes de pared. Los enchufes
de pared sobrecargados, sueltos o danados, los
cables de extension, los cables de alimentacion
cortados o el aislamiento danado o agrietado del
cable son elementos peligrosos. Cualquiera de estas
condiciones podria cuasar descargas electricas o
incendio. Examine con regularidad el cable de su
aparato. Si su aspecto indica danos o deterioro,
desenchufelo y llevelo con un distribuidor de servicio
autorizado para cambiar el cable por una pieza de
colocar sobre el aparato objetos llenos
de liquidos, como floreros.
reemplazo exacta.
Proteja el cable de
NINGUNA LABOR DE MANTENIMIENTO
A
EXCEPCION
DE LAS CONTENIDAS EN
LAS INSTRUCCIONES DE
FUNCIONAMIENTO Y A MENOS QUE
ESTE
CALIFICADO PARA ELLO.
CUIDADO: Este
producto
utiliza
un
alimentacion de abusos fisicos o
mecanicos para evitar que sea torcido, doblado,
pinzado, atrapado bajo una puerta cerrada o pisado
continuamente. En particular, preste atencion a los
enchufes, tomas de pared y al punto en donde el
cable sale del aparato.
NUMERO
DE SERIE:
Encontrara
el numero
unidad. Este numero
sistema laser.
en
la
parte posterior de la
exclusivo de esta unidad y no ha
ninguna otra. Guarde la informacion
sido
Para asegurar el uso apropiado de este
producto, lea detenidamente este manual
de serie
asignado a
requerida en este
permanente de
su
es
manual y conservela
como
prueba
compra.
del usuario y guardelo para futuras
consultas. Si la unidad necesitara
mantenimiento, pongase
un
en
contacto con
Modelo No.
centro de servicio autorizado.
El uso de controles
ajustes, o la
ejecucion de procedimientos, a excepcion
de los aqui especificados, puede causar
una exposicion
peligrosa a la radiacion.
Para evitar la exposicion directa al rayo
o
laser, no intente abrir el confinamiento.
Hay radiacion visible del laser cuanto esta
abierto. NO FIJE LA VISTA EN EL LASER
O HAZ DE LUZ.
CONSEJO: No instale este
equipo
espacio cerrado,
librero
similar.
2
como un
en un
o
______________________________
No. de Serie:
Fecha de
____________________________
Compra:
________________________
Indice
y reproduccion cuadro a
cuadro............................17
Introduccion......................4
Camaralenta.......................17
Imagen congelada
Simbolos
utilizados
este manual
.4
Aleatoria..........................17
Elsimboloenpantalla................4
RepeticionA-B......................17
Repeticion.........................17
Notassobrelosdiscos..................4
SonidoEnvolvente3D................17
en
.
.
.
.
.
.
.
ManejodelosDiscos..................4
Busquedaportiempo.................17
Colocaciondelosdiscos...............4
Zoom.............................18
Limpiezadelosdiscos................4
.5
Tiposdediscosreproducibles
Codigoderegion.......................5
.
Terminos
relacionados
con
.
.
.
.
.
los discos
.
.
.
.
.
.
.
.
.
.6
Busquedademarcadores..............18
Pausa............................18
Caracteristicas
DVD
especiales de los
Comprobacion del contenido de
.
.
.
.18
los discos
Tablerofrontal........................7
DVD:Menus.......................18
ControlRemoto.......................8
Funcionamiento del control remoto
.8
Menudetitulos.....................18
.
.
.
.
.
Colocacion de las baterias del control remoto
.
.
.
.8
Menudeldisco......................18
Angulodelacamara.................18
Cambiodelidiomadeaudio.
Instalacionyconfiguracion
Configuraciondelreproductor
Conexiones del reproductor de
Conexiones de video y audio con
Conexiondeaudioasutelevisor.
.
.
.
.
.
.
.
.
.
.
.
DVD
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.9
.
.
.
.
televisor
su
.
.
.
.
.
.
.
.9
.9
.9
.9
Conexion de audio con equipos opcionales 10
Pantalla.............................11
Iconosderetroalimentacion...............11
Parametrosiniciales...................12
Funcionamientogeneral...............12
IDIOMA...........................12
?IdiomadelMenu...................12
?Audio/Subtitulo/MenuDelDisco
.
.
.
.
.
.12
.
.
.
.
.
.
.
.
?AspectoTV.......................12
?Pantalla.........................12
?ProgressiveScan...................13
AUDIO............................13
?DolbyDigital/DTS/MPEG
?MuestreoPCM(Frecuencia)
Control de Rango Dinamico (DRC)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?
.13
.13
.13
.
.18
Subtitulos..........................18
Reproduccion de un CD de audio o discos MP3,
WMA y CD Graphics Karaoke(CD-G)
.19
.
.
.
.
.
.
Caracteristicas
del CD de audio y del disco
MP3/WMA...........................20
Pausa............................20
Cambiodepista.....................20
.20
Repeticion de Pista/Todo/Desactivar
Busqueda..........................20
.
.
.
.
.
Aleatorio..........................20
RepeticionA-B......................20
SonidoEnvolvente3D................20
Reproduccionprogramada..............21
.21
Repeticion de las pistas programadas
Eliminacion de una pista de la lista "Program" .21
.
PANTALLA.........................12
.
.
.
Eliminacion
de toda la lista de programas
.21
DiscosJPEG.........................22
.22
Proyecciondediapositivas.
Imagencongelada....................22
.
.
.
.
.
.
.
.
.
.
.
Iraotroarchivo.....................22
Zoom.............................22
OTROS...........................14
Rotaciondelaimagen................22
?PBC............................14
Musica
?AutoPlay.........................14
.14
?B.L.E.(Nivelaciondenegros).
?DivX(R)VOD......................14
.
.
.
.
.
.
.
.
BLOQUEO.........................15
?Indice..........................15
(Codigo de seguridad)
?Codigodearea....................15
?
Contrasena
.
.
.
.
.
.15
Funcionamiento..................16
.16
Reproduccion de un DVD o CD de video
.16
Configuracion de la reproduccion
Caracteristicasgenerales...............16
CambioaotroTITULO................16
Cambio a otro CAPITULO/PISTA
.16
Busqueda..........................16
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Cambiodelcanaldeaudio.............16
MP3/WMA mientras
visualiza
se
una
imagen............................22
.23
Mantenimientoyreparaciones
Reproduccion de un disco de pelicula
.
.
.
.
.
.
.
.
.
.
DivX................................24
Caracteristicasadicionales
Memoria de la ultima escena
.
Protector de
Ajuste
pantalla
del modo de video
Control de otros televisores
remoto
.
.
.
.
.
.
.
.
.
.
.
.25
25
25
25
con
el control
25
Uso de la funcion
Karaoke
26
Referencias.....................27
Codigosdeidioma......................27
Codigosdelarea.......................27
Deteccion y solucion de problemas
.28
Especificaciones.......................28
.
.
.
.
.
.
.
.
3
Introduccion
Para
garantizar
el
uso
adecuado de este
producto,
lea
detenidamente este manual del usuario y conservelo
para futuras consultas.
Este manual ofrece informacion
mantenimiento de
que la unidad
contacto
sobre el
manejo
reproductor
necesite alguna reparacion, pongase
en
taller de servicio autorizado.
con un
utilizados
El simbolo
del rayo alerta al usuario de la
de tension peligrosa en la caja del
presencia
reproductor cuya magnitud podria
peligro de descarga electrica.
El
de exclamacion
signo
suponer
la unidad
u
pueden provocar danos
tipo de danos materiales.
que
otro
toque la
cara
grabada
del disco.
Sostenga el disco
dejar huellas en la superficie.
por los extremos para no
Nunca pegue papel o cinta adhesiva
en
el disco.
alerta al usuario de la
manejo y
mantenimiento/reparacion importantes.
peligros
de los Discos
un
existencia de instrucciones de
Indica
"
Notas sobre los discos
No
este manual
en
pantalla
puede aparecer en la pantalla de su
televisor durante la operacion e indica que la funcion
explicada en este manual del usuario no esta
disponible para ese disco de video DVD especifico.
Manejo
Simbolos
en
"
El simbolo
y el
de DVD. En caso de
su
El simbolo
Colocacion
Tras la
en
Nota:
Indica la existencia de notas y caracteristicas
de
operacion particulares
de los discos
reproduccion, guarde
el disco
en su
caja.
No
exponga el disco a la luz solar directa o a fuentes de
calor ni lo deje dentro de un coche estacionado y
expuesto
Limpieza
a
la luz solar.
de los discos
La existencia de huellas y polvo en el disco puede
disminuir la calidad de la imagen y distorsionar el
sonido. Antes de
pano.
Consejo:
Senala
consejos
y
sugerencias
para facilitar las
Pase el
reproducir el disco, limpielo con un
pano desde el centro del disco hacia
afuera.
funciones.
apartado cuyo titulo tenga uno de los simbolos
siguientes indica que este es aplicable
exclusivamente al disco representado con el simbolo.
Un
DVD
DVD y DVD±R/RW finalizados
VCD
CD de video
CD
MP3
4
No utilice solventes fuertes
aguarras, productos
CD de audio
antiestaticos
Discos MP3
WMA
Discos WMA
JPEG
Discos JPEG
DivX
Discos DivX
CD-G
Discos Karaoke CD
vinilo.
Graphics
de
alcohol, benceno,
como
limpieza
fabricados para los
o
aerosoles
antiguos
discos de
Tipos
de discos
Este
DVD
(disco
de 8 cm/12
de 8
reproductor
cm)
lleven la
cm)
La
el
?
de las condiciones del
No utilice CD
con
forma de corazon
forma
u
irregular (por ejemplo,
octagonal) pues podrian
con
provocar el funcionamiento incorrecto de la unidad.
?
Algunas
funciones de la
de video
de DVD y CD
intencionadamente
pueden
programadas por los fabricantes de
unidad reproduce discos DVD y CD
ser
reproducir
DVD
o
un
con un
otros derechos de
intelectual de Macrovision
otros titulares. El
uso
de esta
Corporation y
tecnologia de proteccion
de los derechos de autor debe
domestico
disponibles algunas de las caracteristicas de
reproduccion o que existan otras funciones
de DVD
ley prohibe copiar, retransmitir, proyectar,
retransmitir por cable, reproducir en publico o alquilar
material registrado sin autorizacion. Este producto
cuenta con la proteccion contra copias creada por
Macrovision. Algunos discos cuentan con senales de
proteccion contra copias. Cuando se graban o
reproducen las imagenes de estos discos, estas
tendran interferencias. Este producto utiliza la
tecnologia de proteccion de los derechos de autor que
se encuentra amparada por el registro de ciertas
de video
por el fabricante del
puede que no esten
debe coincidir
La
Macrovision
segun
con
Notas sobre los derechos de autor:
software. Esta
el contenido del disco disenado
software; por consiguiente,
la cubierta. Este numero
el
propiedad
reproduccion
mundo
interior claramente
en su
patentes estadounidenses y
Notas sobre DVD y CD de video
un
codigo de
region distinto al de su reproductor, aparecera en
pantalla el mensaje "Chequee Codigo Regional".
Notas:
grabado).
codigos regionales
numeros
en
Si intenta
?
No pegue etiquetas ni sellos en ninguno de los dos
lados del disco (el lado etiquetado o el lado
"ALL".
o
codigo regional de su reproductor
disco no podra ser reproducido.
con
archivos JPEG.
equipo de
grabacion o del propio disco CD-R/RW (o DVD -R,
DVD +R, DVD -RW, DVD +RW), algunos discos
CD-R/RW (o DVD -R, DVD +R, DVD -RW, DVD
+RW) no pueden ser reproducidos en esta unidad.
mas
visibles
,
?
"4"
de los discos DVD tiene
mayoria
uno o
Asimismo, esta unidad reproduce archivos DivX, DVD
-R, DVD +R, DVD -RW, DVD +RW, VCD, SVCD CDG y CD-R o CD-RW ,con titulos de audio, MP3, WMA o
En funcion
etiqueta
Notas sobre los
?
?
4
DVD
codificado para el area "4". Esta unidad
solo puede reproducir discos DVD que
(VCD)
cm/12 cm)
de 8 cm/12
de DVD ha sido
y fabricado para la
reproduccion del software de
CD de audio
(disco
region
disenado
CD de video
(disco
de
Codigo
reproducibles
Corporation
y
autorizado por
limitado al uso
ser
queda
y otros usos limitados, a menos que
Macrovision Corporation autorice lo contrario. Queda
prohibida
producto.
la
ingenieria
inversa y el
desmontaje
del
LOS CONSUMIDORES DEBEN RECORDAR QUE
adicionales.
NO TODOS LOS TELEVISORES DE ALTA
bajo autorizacion de Dolby
Laboratories. "Dolby" y "Pro Logic" y
Fabricado
de doble D
son marcas
el simbolo
comerciales de
Dolby
DEFINICION
SON TOTALMENTE COMPATIBLES
CON ESTE PRODUCTO Y QUE ELLO PUEDE
PROVOCAR PROBLEMAS DEBIDO A LA
Laboratories.
APARICION
DTS y DTS Digital Out son marcas comerciales de
Digital Theater Systems, Inc.
IMAGEN. SE RECOMIENDA QUE EL USUARIO
CAMBIE LA
DE OBJETOS
CONEXION
ESTANDAR".
EXTRANOS
EN LA
"DEFINICION
DUDAS EN RELACION
A SALIDA
EN CASO DE
CON LA COMPATIBILIDAD DE SU TELEVISOR CON
ESTE MODELO DE REPRODUCTOR DE DVD
Y
625p, PONGASE
CENTRO DE
525p
EN CONTACTO CON NUESTRO
ATENCION
AL CLIENTE.
5
Terminos
relacionados
con
PBC: Control de
los discos
DVD±R/DVD±RW
DVD-R y DVD+R son dos medios distintos para
unidades y discos de DVD grabables. Este formato
permite que la informacion se grabe en el disco DVD
sola
DVD+RW y DVD-RW son dos medios
de reescritura que permiten borrar el contenido del
una
vez.
DVD para
VCD
poder grabar
de
(CD
MB)
Titulo
un
maximo
80 minutos
u
distinta.
video)
Un VCD contiene
650
informacion
(disco
de 74 minutos
de 700
MB)
(disco
de
de videos
MPEG-1 y sonido de calidad estereo.
MPEG
MPEG
internacional para la compresion
de audio y video. Se utiliza para codificar video para
VCD y facilita la codificacion de sonido envolvente
es una norma
multicanal
como
audio
PCM, Dolby Digital, DTS y
MPEG.
MP3
MP3
es un
conocido formato de
compresion
para archivos de audio digital que ofrece
muy parecida a la del CD.
utilizado
una
calidad
codificacion/decodificacion
tipo
de
En
creado por Microsoft
Corp.
JPEG
Joint Pictures
archivos
imagenes
Expert Group. JPEG es un formato
comprimidos que le permite guardar
sin limitacion
en
el numero
de
de colores.
DivX
es
nuevo
6
un
(VCD)
CD de video
con
funciones de control de
reproduccion (PBC) la imagen en movimiento y la
imagen congelada se dividen en secciones llamadas
"escenas". Cada escena se muestra en la pantalla del
menu y recibe un numero que le permite localizar la
que desee. Una
varias pistas.
escena
una o
escena
esta compuesta por
Pista
el nombre de
codificacion
DVD.
Capitulo (solo DVD)
Un capitulo es un segmento de un titulo, por ejemplo,
una escena de una pelicula o una entrevista de una
serie. A cada capitulo le ha sido asignado un numero,
permitiendole localizar el capitulo que desee. Los
capitulos no pueden ser grabados dependiendo del
Escena
Archivo de audio de Windows. Un
Podra
(solo DVD)
Por lo general, un titulo representa a cada una de las
secciones de un disco DVD. Por ejemplo, la pelicula
podria ser el titulo 1, un documental que explique
como se filmo la pelicula podria ser el titulo 2 y las
entrevistas con los personajes serian el titulo 3. A
cada titulo le ha sido asignado un numero de
referencia que le permite localizarlo facilmente.
disco.
WMA
DivX
reproduccion (solo CD de video)
El control de reproduccion se encuentra disponible
para formatos de disco CD de video (VCD) version
2.0. PBC le permite interactuar con el sistema a
traves de menus, funciones de busqueda y otras
operaciones tipicas similares a las de las
computadoras. Asimismo, si el disco incluye imagenes
congeladas de alta resolucion, pueden ser
reproducidas. Los CD de video sin PBC (Version 1.1)
funcionan igual que los CD de audio.
de video
estandar
un nuevo
sistema de
revolucionario basado
Elemento distintivo de la informacion
en
el
compresion para video MPEG-4.
reproducir peliculas DivX en este reproductor
de
imagen o pista de sonido de un idioma
especifico (DVD) o una pieza musical de un CD de
video o audio. A cada pista le ha sido asignado un
numero que le permite localizar la que desee.
Los discos DVD aceptan una pista de video (con
multiples angulos) y varias pistas de audio.
como
la
audiovisual,
Tablero frontal
POWER
ENCIENDE y APAGA el
reproductor.
PLAY(N)
Inicia la reproduccion.
OPEN/CLOSE(Z)
Abre y cierra la
disco.
STOP(x)
Detiene la reproduccion.
Bandeja
bandeja
del
del disco
Introduzca
aqui
el disco.
Sensor remoto
Dirija
el control remoto del
reproductor
de DVD hacia este
punto.
Pantalla
Muestra el estado actual del
Control del volumen del
reproductor.
microfono
Ajusta
el volumen del microfono.
Entrada del microfono
Conecte
MIC
o
un
microfono
(MIC1, MIC2)
a
la entrada
MIC2.
7
Control Remoto
Abre
o
OPEN/CLOSE
cierra la bandeja de discos.
Botones de control del
televisor
TV POWER:
POWER
Enciende y apaga el
reproductor
de
Enciende y apaga el televisor.
DVD.
TV PR/CH +/--:
Botones numericos 0-9
Selecciona opciones numeradas en
un menu.
Selecciona
un
canal del
televisor.
TV VOL +/--:
CLEAR
Elimina
programa
o
de la lista del
pista
una
la
AV:
el menu
marca en
Selecciona la fuente del televisor.
BUSQUEDA.
de
SKIP(./>)
Va al siguiente capitulo
SCAN(m/M)
Busca hacia atras
pista.
Vuelve al comienzo del capitulo
o pista actual o va al capitulo o
pista anterior.
hacia delante.
o
PAUSE/STEP
( ;)
Interrumpe temporalmente la
reproduccion. Presione varias
veces para una reproduccion
TITLE
PLAY(N)
reproduccion.
de
un
disco,
ENTER
Confirma la seleccion
Accede
a
Selecciona
un
?
?
?
la
DISPLAY
la pantalla.
?
SEARCH
BUSQUEDA
DE MARCADOR.
idioma de audio
?
PROGRAM
Incluye
SUBTITLE
Selecciona el idioma de los
subtitulos.
?
una
pista
la lista de
en
programas.
?
ZOOM
Aumenta la
ANGLE
Selecciona el angulo de la camara
si esta disponible.
?
?
imagen
de video.
REPEAT
Repite
un
capitulo, pista,
titulo
o
todo.
SETUP
sale del menu de
?
o
durante
cualquier punto
reproduccion.
Muestra el menu
?
(DVD).
Entra
MARKER
Marca
del menu.
AUDIO
del
RETURN
Sale del menu de configuracion
y despliega el menu de un CD
de video CD con funcion PBC.
disco DVD.
bBvV(izq./der./arriba/abajo)
Selecciona una opcion en el menu.
el menu de titulos
si esta disponible.
Despliega
DVD MENU
Accede al menu
o
STOP(x)
Detiene la reproduccion.
cuadro por cuadro.
Comienza la
el volumen del televisor.
Ajusta
?
configuracion.
A-B
Repite
?
la secuencia.
RANDOM
Reproduce
las
pistas
en
orden
aleatorio.
?
KARAOKE
Accede
Colocacion
Funcionamiento del control remoto
Dirija el control remoto
oprima los botones.
hacia el
sensor
distintos
tipos.
alcalinas,
8
etc.
Por
usadas
ejemplo:
con nuevas
normales
ni de
con
elimina el menu
KARAOKE.
de las baterias del control remoto
Retire la
tapa del compartimiento de las
baterias de la parte posterior del control
remoto y
AAA AAA
No mezcle baterias
o
(ECHO)
remoto
con
e
introduzca dos baterias
la alineacion
correcta
y
(AAA)
.
Instalacion
del
Configuracion
y
configuracion
Conexiones de audio y video
reproductor
Es
posible que la imagen y el sonido de un televisor
aparato de video cercano se distorsionen durante la
o
reproduccion. Si esto ocurre, coloque el reproductor
lejos del televisor, videocasetera o radio y apague la
unidad despues de sacar el disco.
de que el reproductor de DVD este
conectado directamente al televisor y no a un
los manuales de
distorsionada por el sistema de
televisor,
u
de DVD
televisor utilizando
de DVD
sistema estereo
proteccion
verse
contra
copias.
Video: Conecte la SALIDA DE VIDEO del
la entrada de video del
a
cable de video
un
(V).
Video-S: Conecte la SALIDA DE VIDEO-S del
su
su
aparato de
video; de lo contrario, la imagen del DVD podria
televisor y otros equipos, existen
distintas formas de conectar el reproductor. Consulte
Dependiendo
de
reproductor
televisor
Asegurese
reproductor
Conexiones del
con su
reproductor
de DVD
a
del televisor utilizando
otros
la ENTRADA DE VIDEO-S
un
cable de video-S
aparatos para obtener la informacion adicional
Video
necesaria para la conexion.
las salidas de COMPONENT VIDEO
Componente (Color Stream ):
(S).
Conecte
OUT/PROGRESSIVE SCAN del
Parte
posterior del reproductor de
reproductor de
DVD a las entradas correspondientes del televisor
utilizando el cable Y Pb Pr (C).
DVD
Progressive Scan (ColorStream
?
Si
televisor
su
"listo para la
es un
pro):
aparato de alta definicion
o
digital", puede aprovechar la
Progressive Scan del reproductor de DVD para
obtener la mayor resolucion del video posible.
?
Si
era
televisor
acepta el formato de
Progressive Scan, la imagen aparecera
su
no
codificada si intenta visualizar
Progressive
Scan
en
el
imagenes con
reproductor de DVD.
Notas:
?
Ajuste
la
?
Ajuste
la
?
sacando
Progressive Scan a "Off" (Apagado)
cualquier disco de la unidad y cierre
bandeja
de discos.
posterior
del reproductor
la
Cerciorese
de que aparece "No Disco" en la
A continuacion, presione STOP y
pantalla.
mantengalo presionado
Parte
de DVD
Progressive Scan a "On" (Encendido) en
el menu de configuracion de la senal progresiva.
Consulte la pagina 13.
durante 5
segundos
antes
de soltarlo.
?
La
Progressive
Scan
conexiones de video
VIDEO
Conexion
no
funciona
con
las
analogicas (entrada
amarilla
OUT).
de audio
a su
televisor:
Conecte las SALIDAS DE AUDIO del
de
DVD
del
a
las entradas de audio
televisor
con
reproductor
izquierda y derecha
los cables de audio. No conecte la
SALIDA DE AUDIO del
conector de audifonos
reproductor de DVD
(unidad de grabacion)
al
de
su
sistema de audio.
9
Conexion
de audio
con
equipos
opcionales
Conecte el
reproductor
de DVD
a su
para la salida de audio.
Parte
posterior del reproductor de
DVD
equipo opcional
Amplificador equipado con dos canales de sonido
estereo analogo o Dolby Digital Pro Logic II/Pro
Logic: Enchufe los conectores de SALIDA DE AUDIO
del reproductor de DVD a las entradas de audio
izquierda y derecha de su amplificador, receptor o
sistema estereo, utilizando los cables de audio (A).
Amplificador equipado con dos canales de sonido
estereo digital (PCM) o receptor de audio/video
equipado con un decodificador multicanal (Dolby
DigitalTM, MPEG 2 o DTS): Enchufe uno de los
conectores de audio digital (COAXIAL X) del
reproductor de DVD a la entrada correspondiente de
su amplificador. Utilice un cable opcional de audio
digital (coaxial X).
Sonido
digital
Una conexion
multicanal
multicanal
digital
ofrece la
calidad de sonido. Para ello necesita
X
A
audio/video multicanal que soporte
formatos de audio admitidos por su
un
mejor
receptor de
uno o
mas
de los
reproductor de
DVD, como por ejemplo, MPEG 2, Dolby Digital y
DTS. Consulte el manual del receptor y los logotipos
de la
parte frontal del receptor.
Notas:
COAXIAL
?
DIGITAL INPUT
AUDIO INPUT
Si el formato de audio de la salida
coincide
Amplificador (Receptor)
emitira
?
con
las
capacidades
de
digital
su
no
receptor, este
sonido fuerte y distorsionado
emitira sonido alguno.
o no
Solo
digital
digital si su
un
se
puede
obtener el sonido envolvente
de seis canales
receptor
cuenta
a
traves
con un
de la conexion
decodificador multicanal
digital.
?
Para
ver
el formato de audio del DVD actual
pantalla, presione
10
AUDIO.
en
Pantalla
Ejemplo:
Puede
en
comprobar el
pantalla. Algunos
utilizando el menu.
1.
3.
general de reproduccion
elementos se pueden cambiar
Para utilizar la pantalla:
Presione el boton
PANTALLA)
2.
estado
DISPLAY
durante la
(MOSTRAR
reproduccion.
Presione v / V para seleccionar una
Se marcara la opcion seleccionada.
EN
opcion.
Presione b / B para cambiar la configuracion.
Tambien puede usar los botones numericos si
Notas:
?
Es
que algunos discos no dispongan de
todas las caracteristicas indicadas a continuacion.
posible
reproduccion
de
DVD
un
Metodo
Opciones
Numero
de titulo
de seleccion
b /
1/3
B, Numeros
ENTER
Numero
de
b /
1/12
capitulo
B, Numeros
ENTER
Hora
procede (por ejemplo, para introducir el numero
del titulo). Para algunas funciones, presione
ENTER para ejecutar la configuracion.
?
Pantalla durante la
Numeros
0:20:09
ENTER
,
Idioma de audio
y modo de salida
de audio digital
b/Bo
Idioma de los
b/Bo
AUDIO
1 ENG
ABC
subtitulos
Angulo
Instalcioyfgur
SUBTITLE
b/Bo
1/3
ANGLE
Sonido
b/B
3D SUR
presiona boton alguno durante 10 segundos,
desaparece el desplegado en pantalla.
Si
no
Iconos de retroalimentacion
un
Title
A-B
Repetir
titulo
Repetir
secuencia
MARKER SEARCH
Menu
de
Reanudar la
busqueda
Metodo
Opciones
Introducir marcador
(o
de marcador
modo
de
pista
PBC)
1/3
a
partir
de este
de seleccion
b /
Hora
B, Numeros
Numeros
0:20:09
ENTER
Canal de audio
b/Bo
punto
Accion
de
ENTER
(solo VCD)
reproduccion
reproduccion
VCD o CD-G
Numero
1/9
Pantalla durante la
Ejemplo:
AUDIO
prohibida
o no
disponible
Sonido
3D SUR
b/B
Ejemplo: Visualizador en pantalla durante la
reproduccion de un disco de pelicula divx
Metodo
Opciones
Numero
de
pista
1/3
de seleccion
b /
B, Numeros
ENTER
Hora
0:20:09
Numeros
,
ENTER
Idioma de audio
b/Bo
1
y modo de salida
de audio digital
MP3
Idioma de los
subtitulos
Sonido
ABC
ENG
AUDIO
b/Bo
SUBTITLE
3D SUR
b/B
11
Parametros
iniciales
IDIOMA
IDIOMA
Con el menu
Setup (Configuracion), puede efectuar
varios ajustes en opciones tales como la imagen y el
sonido. Asimismo, puede configurar, entre otras
cosas, el idioma para los subtitulos y el menu Setup.
Para conocer mas detalles sobre cada opcion de este
menu, consulte las paginas 12 a 15.
Para entrar y salir del menu:
Presione SETUP para entrar al menu.
de
nuevo
SETUP volvera
Para pasar
Presione B
en
Para volver
Presione b
la
a
a
en
la
pantalla
inicial.
la
categoria
Elija
anterior:
Original
Select
y la
Setup
pantalla.
general
Aparecera
de la
eleccion.
el menu
de
Original:
se grabo
opcion elegida,
Hace referencia al idioma
o
en
el que
Otros: Para seleccionar otro idioma, presione los
botones numericos y a continuacion presione ENTER
para introducir el numero de cuatro digitos que le
corresponda en la lista de codigos de idiomas del
asi
alternativos.
de referencia. Si introduce
capitulo
idioma
erroneo, presione
un
de
codigo
CLEAR.
PANTALLA
PANTALLA
Aspecto
Algunas opciones requieren
16:9
TV
Pantalla
panoramico
Progressive
PLAY para salir del menu
original
el disco.
pasos adicionales.
Presione SETUP
DVD
Del Disco
disco.
Utilice los botones v / V para seleccionar la
configuracion deseada B presione ENTER para
su
/ Menu
Seleccione el idioma que prefiera para la pista de
audio (audio del disco), los subtitulos y el menu del
Utilice los botones v / V para seleccionar la
segunda opcion deseada B presione u para pasar
a la tercera categoria.
5.
Menu Del Disco
idioma para el menu
un
Audio / Subtitulo
el control remoto.
configuracion actual
como los parametros
confirmar
Off
Idioma Del Menu
Utilice los botones v / V para seleccionar la
opcion deseada y presione B para pasar a la
segunda categoria. La pantalla muestra la
4.
Subtitulo Del Disco
Presionando
configuracion.
3.
Original
el control remoto.
Presione SETUP.
2.
Audio Del Disco
Mover
categoria siguiente:
Funcionamiento
1.
a
Idioma Del Menu
Scan
Off
de
Configuracion.
Nota:
Si
hay
solo
un
esta
aparece
CD-G
colocado, la operacion de SETUP
disponible cuando
en la pantalla de la
el menu
TV.
Mover
Select
del disco
Aspecto
TV
DVD
4:3: Seleccione esta
cuando conecte
opcion
un
televisor
estandar 4:3.
16:9: Seleccione esta
opcion
cuando conecte
un
televisor
de 16:9 de ancho.
Pantalla
La
DVD
configuracion
de Modo de
cuando el modo de
en
solo funciona
aspecto del televisor
se
la
parte superior
una
e
imagen
ancha
inferior de la
con
pantalla completa
que no se ajusten a
12
bandas
pantalla.
PanScan: Muestra de forma automatica
la
encuentra
"4.3".
LetterBox: Muestra
en
pantalla
y corta las partes de
la misma.
la
imagen en
la imagen
Progressive Scan
El video
con
AUDIO
Progressive Scan muestra imagenes
y con poco parpadeo. Si va a utilizar
de
gran calidad
tomas de video de componente para conectarr a un
televisor o monitor que sea compatible con una senal
de
Progressive Scan, ajuste
la
Progressive
Scan
Cada disco DVD cuenta
con
varias
opciones
de salida
de audio.
Configure las opciones de AUDIO del
reproductor segun el tipo de sistema de audio que
utilice.
en
AUDIO
"On".
Progressive Scan:
Para ACTIVAR la
Conecte la salida de video
entrada de
su
entrada de
su
componente del DVD
monitor/televisor y
televisor o monitor
ajuste
a
a
la
el modo de
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Muestreo PCM
48 kHz
DRC
On
video
componente.
1. Seleccione
PANTALLA
"Progressive Scan" en el menu
y, a continuacion, presione B.
Mover
Dolby Digital
PANTALLA
Aspecto TV
Scan
el
On
conector de SALIDA DIGITAL del
de
Off
DVD
reproductor
equipo con
amplificador o a otro
decodificador de Dolby Digital, DTS
a un
Instalcioyfgur
DivX
Bitstream: Seleccione "Bitstream" si enchufo
Pantalla
Progressive
DVD
/ DTS / MPEG
Select
o
MPEG.
PCM
Anterior
Mover
(para Dolby Digital / MPEG): Seleccione
esta opcion cuando haya conectado el equipo a
un amplificador de sonido estereo
digital de dos
canales. Los DVD codificados con Dolby Digital o
Intro
2. Seleccione "On" usando los botones v / V.
MPEG
Off
televisor
no
imagenes con Progressive
reproductor de DVD.
4. Cuando aparezca
confirmacion,
se
en
la
pantalla
iluminara
Scan
el
Si
96
el menu
Cancel
en
Muestreo PCM
5. Presione ENTER para ajustar el
modo de Progressive Scan.
(Cancelar).
reproductor
al
haya ajustado la Progressive Scan, solo
la imagen en un televisor o monitor compatible
dicha funcion. Si ajusta por error la Progressive
Scan
en
a
traves
no
habra
del conector de
"On", debera reiniciar la unidad. Primero,
reproductor de DVD. A
continuacion, presione STOP ( x ) y mantengalo asi
durante cinco segundos antes de soltarlo. La salida
de video se restablecera al ajuste estandar y la
imagen sera visible de nuevo en un televisor o
monitor analogico convencional.
DVD
receptor o amplificador NO acepta senales de
kHz, seleccione 48 kHz. Con ello, la unidad
su
su
las senales
sistema
pueda
de 96 kHz
a
decodificarlas.
receptor o amplificador puede manejar senales
de 96kHz, seleccione esta opcion. Al hacerlo, la
su
unidad admite cada
realizar
ningun
Compruebe
verificar
su
que
saque el disco del
(Frecuencia)
48 kHz para que
Si
Precaucion:
con
DTS
convierte automaticamente
de
Utilice los botones b / B para iluminar Enter.
vera
audio
acepta el formato de Progressive
visualizar
vez
en
SALIDA DIGITAL.
Scan, la imagen aparecera codificada si intenta
Una
automaticamente
Si selecciona "Off"
(para DTS):
salida de senal
Nota:
su
mezclaran
PCM de dos canales.
3. Presione ENTER para confirmar su seleccion.
Aparecera el menu de confirmacion.
Si
se
Control de
tipo
de senal
sin necesidad de
otro proceso.
la documentacion
de
su
amplificador
para
capacidad.
Rango
Dinamico
(DRC)
DVD
DivX
Con el formato DVD
puede escuchar la banda sonora
de un programa con la representacion mas precisa y
realista posible, gracias a la tecnologia de audio digital.
No obstante, tal vez desee comprimir el rango dinamico
de la salida de audio (diferencia entre los sonidos mas
altos y los mas bajos). Esta opcion le permite escuchar
una pelicula a un volumen mas
bajo sin perder la
claridad del sonido. Para
ello, active el DRC.
13
OTROS
B.L.E
Puede cambiar los
Para seleccionar el nivel de negros de las
reproducidas, ajuste sus preferencias y la
y
DivX(R)
ajustes
de
PBC,
Auto
Play,
B.L.E.
VOD.
(Nivelacion
imagenes
capacidad
Auto
On: Escala de
grises expandida (0
Off: Escala de
grises
Off
Play
B.L.E.
recortado).
estandar
IRE
recortado).
(7.5
On
DivX(R)
VOD
Select
DivX(R)
Usted
DRM
para
Select
Mover
DivX
VOD
puede visualizar el codigo de registro DivX
(Administracion de Derechos Digitales) solo
su
unidad.
VCD
Su
el control de
IRE
On
PBC
Ajuste
negros)
del monitor.
OTROS
PBC
de
reproduccion (PBC)
en
"On"
codigo
de
Para
u
registro
es:
conocer mas
XXXXXXXX
visite
www.divx.com/vod
"Off".
Hecho
On
(Activado): Los CD de video
reproducen segun los parametros
con
PBC
se
El
del PBC.
Off
(Desactivado): Los CD de video con
reproducen igual que los CD de audio.
PBC
se
de
registro se utiliza para el agente de
servicio VOD (Video Bajo Demanda). Usted puede
adquirir o alquilar un archivo de pelicula codificado.
codigo
Notas:
Auto
DVD
Play
Puede
configurar el reproductor de DVD para que un
disco DVD se reproduzca automaticamente al
introducirlo. Si activa el modo de reproduccion
automatica, el reproductor de DVD buscara el titulo
cuya duracion de reproduccion sea mayor y lo
reproducira de forma automatica.
On
(Activado):
automatica
esta
La funcion
de
Si usted decide
alquilar
varias
de visualizar los
opciones
muestra
?
a
archivo DivX
un
limites,
Visualizar el numero
el que
en
Ver
DivX(R)
Este rental tiene 3
VOD Rental
veces
Desea utilizar
reproduccion
puede
de muestra
su
3
en
sobra
veces
de muestra ahora?
activada.
(Desactivado):
automatica
esta
La funcion
de
reproduccion
desactivada.
?
El
alquiler
ha finalizado.
Nota:
Es
posible
funcione
que la
con
reproduccion
algunos DVD.
automatica
no
Rental Vencido
(Hecho)
?
Visualizar el
error
de autorizacion.
Error
Este
en
equipo
autorizacion
no
esta autorizada
para hacer funcionar este video
(Hecho)
14
como se
continuacion.
(Si) (No)
Off
VOD, tendra
ver
el archivo.
Contrasena
BLOQUEO (Control paterno)
Puede introducir
BLOQUEO
Desbloqueo
Indice
Contrasena
de
(Codigo
o
seguridad)
cambiar la clave.
1. Seleccione Contrasena
Nueva
presione
US
2.
el menu
en
BLOQUEO y
B.
Siga el paso 2 indicado a
(Contrasena). Se marcara
la
izquierda
la opcion "Cambiar"
o
"Nueva".
Mover
3. Introduzca el
Select
presione
DVD
Indice
contienen
que no son
Muchos de estos discos
paterno que
escenas
peliculas y escenas se clasifican del 1 al 8
funcion del pais. Algunos discos ofrecen otras
escenas mas
apropiadas como alternativa.
de control
se
del disco.
Las
en
su
codigo
de
seguridad
Si olvida
su
codigo
de
seguridad, puede
1.
material que usted
no
2.
del
Codigo
seguridad
y
las
a
el menu
de BLOQUEO y
opciones
de
de cuatro
digitos que
codigo de seguridad,
un
creo.
le
se
de
codigo
Si aun
pedira
no
ha
que lo
haga.
Introduzca
codigo
de 4
digitos
presione
ENTER. Introduzca de nuevo el codigo y presione
ENTER para confirmar. Si se equivoca antes de
presionar ENTER, presione CLEAR.
3.
Elija
una
un
restricciones y la 8
y
(uno)
(ocho) es
la que tiene mas
la que menos tiene.
es
paterno
no
reproducira
opcion
estara
en su
de
desbloqueo,
activado y el disco
totalidad.
el control
Introduzca
codigo
de
un nuevo
digitos
seguridad.
"210499" y
codigo siguiendo
se
los pasos
DVD
de area
cuyos estandares se
usaron para valorar el disco de video DVD, en base
la lista del capitulo para referencia.
Introduzca el
codigo
de area
1.
Seleccione
"Codigo de area"
BLOQUEO y presione B.
en
2.
Siga el paso
(Indice).
a
3.
Elija
el
2 que
primer
se
indica
el menu
la
a
de
izquierda
caracter utilizando los botones
4.
Presione ENTER y seleccione el
con los botones v / V.
5.
Presione ENTER para confirmar el
se
que
Nota:
Si establece
el
de seis
v/V.
Desbloqueo
Si selecciona la
Introduzca el numero
Codigo
indice del 1 al 8 utilizando los botones v / V.
Indice 1-8: La indice 1
de
ya indicados.
Indice, Contrasena
debe introducir el
pais,
Presione SETUP para mostrar el menu
considera adecuado.
B.
2. Para acceder
creado
en
estos pasos:
cancelara
3.
1. Seleccione "Indice"
Instalcioyfgur
cancelarlo
configuracion.
paterno le permite bloquear el
que se encuentren por debajo de la
evitando con ello que sus hijos puedan
elegida,
presione
ENTER. Introduzca de
Si olvida
siguiendo
acceso a escenas
ver
digitos y
nuevo el codigo
4. Presione SETUP para salir del menu.
escenas
adecuadas para los ninos.
incluyen informacion para el control
aplica al disco completo o a ciertas
indice
de cuatro
para confirmarlo.
Algunas peliculas
La funcion
codigo
nuevo
segundo
Codigo
caracter
de area
haya elegido.
indice para el reproductor, se
todas las escenas del disco con una indice
una
reproducen
igual o inferior.
reproduciran a
en
indice mayor no se
menos que existan escenas alternativas
el disco. Las escenas alternativas deberan tener
una
indice
alternativa
Las
igual
o
escenas con
inferior. Si
no se
encuentra
adecuada, la reproduccion
introducir la clave de cuatro
de indice para
se
una
detiene. Debe
digitos o cambiar
poder reproducir el disco.
el nivel
4. Presione ENTER para confirmar la indice elegida;
continuacion presione SETUP para salir del menu.
a
15
Funcionamiento
de
Reproduccion
un
DVD
o
Caracteristicas
CD
de video
Configuracion
generales
Nota:
de la
A
que se establezca lo contrario, todas las
operaciones descritas emplean el control remoto.
reproduccion
menos
1.
Encienda el televisor y elija la fuente de entrada
de video conectada al reproductor de DVD.
Algunas caracteristicas pueden encontrarse tambien
disponibles en el menu Setup (Configuracion).
2.
Encienda el sistema de audio
Cambio
a
Cuando
un
la fuente de entrada
(si procede) y elija
conectada al reproductor de
DVD.
3.
Presione ON/CLOSE para abrir la bandeja del
disco y coloque el disco elegido en la misma, con
la
4.
cara
grabada
hacia
abajo.
Presione OPEN/CLOSE para
Presione PLAY.
En
algunos
menu
casos,
del disco.
es
posible
cerrar
la
bandeja.
TITULO
disco tiene mas
cambiar de
uno a
de
un
titulo, puede
otro. Presione DISPLAY
con
la
reproduccion en paro y el numero correspondiente
(0-9) o utilice b / B para cambiar a otro titulo.
Puede reproducir cualquier titulo con solo introducir
su numero
con la reproduccion
en paro.
Cambio
a
Cuando
un
otro
CAPITULO/PISTA
que aparezca el
o
Utilice los botones
otro
bBvVpara elegir
el
?
disco tiene mas
un
cuando el disco tiene mas
cambiar de
titulo/capitulo que desea ver; a continuacion
presione ENTER para iniciar la reproduccion.
Presione TITLE o MENU para volver a la pantalla
titulo de
capitulo/pista
Presione SKIP .
de
como
de
capitulo
una pista, puede
sigue:
un
> durante la
o
reproduccion para seleccionar el capitulo/pista
siguiente o regresar al inicio del capitulo/pista
del menu.
actual.
?
Utilice los botones numericos
para seleccionar la
pista que desea ver y presione RETURN para
volver a la pantalla del menu. Los parametros del
capitulo/pista
?
y los procedimientos del funcionamiento
pueden variar. Siga las instrucciones de cada
?
Si ha
configurado el control paterno y el disco no
ajusta a los parametros de clasificacion, debera
introducir la clave. (Consulte el apartado
"BLOQUEO" en la pagina 15.)
de
capitulo durante la
DVD, presione DISPLAY
un
a un
y los
botones v / V para seleccionar el icono del
capitulo/pista. A continuacion, introduzca el numero
pantalla de menu. Tambien puede desactivar el
PBC (consulte el apartado "PBC" en la pagina 14).
Notas:
SKIP . para volver al
anterior.
veces
Para ir directamente
reproduccion
menu
?
Presione dos
del
capitulo/pista
o
utilice los botones b / B.
Busqueda
se
posible que los DVD tengan un codigo de area.
Su reproductor no reproduce discos que tengan un
codigo de area distinto al de este. El codigo de area
de este reproductor es 4 (cuatro).
1.
Presione SCAN
durante la
(m
o
M)
(m
o
M) repetidamente
reproduccion.
2.
Presione SCAN
para
seleccionar la velocidad deseada:
Es
DVD, Discos DivX; X2, X4, X16
CDdevideo;X2,X4oX8
3.
Para salir de la funcion
o
X100
SEARCH, presione PLAY.
Cambio del canal de audio
Presione AUDIO varias
veces
durante la
para escuchar un canal de audio
Diestro o Derecho).
16
reproduccion
diferente (Stereo,
Imagen congelada
reproduccion
y
cuadro
a
cuadro
Repeticion
Puede
1.
Presione PAUSE/STEP
el control remoto
en
reproducir
titulo
un
/capitulo/ todo/pista
de
un
disco.
durante la
cuadro
a
2.
Para salir del modo de
Camara
el modo de
imagen congelada,
(X)
durante la
de DVD entrara ahora
reproductor
reproduccion.
en
Use SCAN
para seleccionar la
velocidad deseada: t 1/16, t 1/8, t 1/4,
1/2
1/2
En
(m
(hacia atras), o T 1/16,
(hacia delante).
T
1/8, T 1/4,
t
o
o
T
repite el titulo actual.
no repite la reproduccion.
,
discos DivX
-
no
repite
la
de Pista
Repeticion
un
disco.
reproduccion.
En
un
CD de video
PBC debe desactivar el
con
Setup para utilizar la funcion de
repeticion (consulte el aparato "PBC" en la pagina
14).
(hacia delante).
lenta, presione
Off:
PBC
un
PLAY
Off:
/
Capitulo
Notas:
?
Para salir del modo de camara
?
?
discos DivX y CD de video, la velocidad
lenta cambia: T 1/16, T 1/8, T 1/4 o T 1/2
3.
Titulo:
elegir
para
deseado.
/Todo/Desactivado
?
Pista: repite la pista actual.
?
Todo: repite todas las pistas de
M)
o
?
CD de video
modo
PAUSE.
2.
repeticion
reproduccion
Discos de video DVD-Repeticion de
Titulo / Desactivado
?
Capitulo: repite el capitulo actual.
lenta
Presione PAUSE/STEP
El
Presione REPEAT durante la
PLAY.
presione
1.
reproduccion. Adelante la imagen cuadro
presionando PAUSE/STEP varias veces.
?
(N).
el menu
en
Si
presiona SKIP (>) una vez durante la
repeticion de capitulo (pista), la reproduccion
repeticion se cancela.
de
Nota:
En
discos DivX y CD de video no es
reproducir hacia atras en camara lenta.
un
posible
Presione RANDOM durante la
reproduccion. La
unidad iniciara automaticamente la reproduccion
aleatoria y aparecera "Random" en la pantalla del
televisor.
2.
La unidad
Presione RANDOM nuevamente para regresar al
mas
1.
Presione DISPLAY durante la
2.
Use v
La
Consejo:
aleatoria, la unidad elige
la
reproduccion
otro
aleatoria.
un
en
el menu
CD de video
el
(consulte
Repeticion
2.
repetir
A
*
"
con
A-B
una
en
el
A B
punto de inicio elegido.
aparece brevemente
vez en
el
en
1.
de sonido seleccionada
se
de sonido.
iluminara.
B para seleccionar "3D SUR".
Para desactivar el efecto de sonido envolvente
o
reproduccion
en
en
cualquier punto
de
reproduccion. El
tiempo muestra el tiempo
busqueda por
reproduccion transcurrido.
2.
Presione v / V para seleccionar el icono del
tiempo y aparecera "-:--:--".
3.
Introduzca el
punto final elegido.
"
Presione nuevamente A-B para cancelar.
Presione DISPLAY durante la
cuadro de
pantalla.
aparece brevemente en pantalla y
comienza la secuencia de repeticion.
3.
Use b
opcion
Busqueda por tiempo
secuencia:
Presione A-B otra
"
PBC, debe desactivar el PBC
Setup para utilizar la funcion Aleatoria
apartado "PBC" en la pagina 14).
Presione A-B
"
opcion
reproduccion.
seleccionado del disco:
En
1.
V para seleccionar la
Para iniciar la
Nota:
Para
o
casa):
3D, seleccione "Normal".
SKIP > durante la
reproduccion
titulo (pista) y reanuda
en
bocinas que normalmente se necesitan para
escuchar audio multicanal en un sistema de cine en
o
3.
presiona
efecto de sonido
un
3D que simula una reproduccion de audio
multicanal con dos bocinas estereo (en lugar de las cinco
modo normal.
Si
puede reproducir
envolvente
Aleatoria
1.
Sonido Envolvente 3D
tiempo de inicio requerido en horas,
minutos y segundos de izquierda a derecha. En caso
de que introduzca un numero equivocado, presione
CLEAR y borre los numeros que haya introducido. A
continuacion
4.
introduzca los numeros
Presione el boton
La
reproduccion
correctos.
ENTER para confirmar.
se iniciara a partir del momento
seleccionado.
17
Caracteristicas
Zoom
Utilice el
para ampliar la
Presione ZOOM durante la
1.
imagen de video.
reproduccion o la
zoom
Cada
que presione el boton ZOOM la
en la secuencia: 100% tamano
vez
cambiara
Menus
tamano
1600% tamano
→
pantalla
ajuste
modo de
ajuste
cuando
pantalla
que aparece la
en
reproduce
una
imagen
pelicula en
3/4 para seleccionar entre
Enhanced (Mejorada) y Maximum (Maxima).
Utilice los botones
Para reanudar la
boton
bBvVpara
El menu
2.
cambiar la
de la
reproduccion normal, presione
El modo de
reproducir
opcion
ajuste
en
el
pantalla
un
en
registrar
un
Puede iniciar la
disponible para
archivo de pelicula.
marcador
desde
un
maximo
de
puntos almacenados en la memoria. Para
registrar un marcador, presione MARKER
(MARCADOR) en el punto del disco que desee
nueve
marcar.
en
la
para
El icono de marcador
pantalla
registrar
Para mostrar
1.
Durante la
SEARCH
del televisor.
aparecera brevemente
Repita esta operacion
hasta
marcadores.
o
2.
reproduccion
del
(BUSQUEDA).
El
aparecera
marcada:
disco, presione
menu
de
o
pantalla.
en
cancelar.
Presione ENTER y la reproduccion se inicia a
partir de la escena marcada o presione CLEAR y
el numero del marcador se borrara de la lista.
Puede
reproducir cualquier
introduciendo
su
numero
en
marcador
el menu
de
busqueda
de marcadores.
(PAUSA)
durante la
reproduccion.
18
la
y
del idioma hablado y
de titulo.
capitulos
salir, presione
nuevamente TITLE.
MENU y aparecera el menu del
salir, presione nuevamente MENU.
disco.
de la camara
escenas
angulos
de
camara
distinto durante la
grabadas
cambiar
camara, puede
Presione ANGLE
en
a un
distintos
angulo
de
reproduccion.
(ANGULO)
varias
veces
durante la
para seleccionar el angulo deseado. No
olvide que el numero del angulo actual aparece en el
visualizador.
reproduccion
Consejo:
El indicador de
angulo parpadeara en la pantalla del
televisor durante las escenas grabadas en angulos
diferentes para indicar que se puede cambiar el
angulo.
Cambio del idioma de audio
Presione AUDIO varias
para oir
un
idioma
o
veces
pista
durante la
reproduccion
de audio diferentes.
Subtitulos
Presione SUBTITLE
(SUBTITULO)
la
ver
reproduccion
para
varias
los subtitulos
en
veces
durante
distintos
idiomas.
El archivo de subtitulos
visualiza
a
angulos
Notas:
Presione PAUSE/STEP
Para volver
como
del disco
Angulo
Pausa
2.
tales
Presione
?
1.
del
busqueda
segundos siguientes, presione b / B
elegir un numero de marcador que desee
mostrar
4.
una escena
En los 10
para
3.
nueve
anular
de marcadores
ofrece caracteristicas
Si el disco contiene
reproduccion
en
esta
de marcadores
Busqueda
en
camara, opciones
Para
3.
Para
disco DVD y
un
funcione
zoom no
Si el titulo
disco.
subtitulos
de
(TITULO).
reproduccion cuenta con menu, este aparecera
la pantalla. De lo contrario, aparecera el menu
Menu
posible que la
algunos DVD.
Para
de titulos
CLEAR.
Es
?
caracteristicas
a
Presione TITLE
1.
Normal,
Notas:
?
que le
especiales.
Para utilizar el menu del disco, presione MENU.
Introduzca el numero correspondiente o utilice los
botones bBvVpara marcar su eleccion.
A continuacion, presione ENTER.
imagen ampliada.
4.
ofrecer menus
pueden
acceder
permitan
Menu
DVD. Presione
3.
en
pantalla:
en
Puede cambiar el modo
la
→
400%
Los discos DVD
100% tamano
→
Modo de
en
pantalla
→
del contenido de los discos DVD:
Comprobacion
reproduccion congelada para activar la funcion de
ampliacion de imagen. Aparece brevemente un
cuadro en la parte inferior derecha de la imagen.
2.
de los DVD
especiales
reproduccion, presione
PLAY.
?
en
smi,
del archivo DivX solo
se
srt y sub.
hay informacion o hay un codigo que no
puede leer en el archivo DivX, se visualizara "1",
Si
no
etc.
de un CD de audio
WMA y CD Graphics
Reproduccion
o
reproductor
Si
?
discos MP3,
Karaoke (CD-G)
El
Consejos:
MUSIC
puede reproducir formatos Audio
Graphics (CD-G) Adicionalmente
en
discos
?
Presione DVD
?
En
pista y PLAY
reproduccion.
una
la
un
CD mixto que
para ir
la
a
o
se
MP3/WMA al de
marcara
MUSIC
o
PHOTO
ENTER para
La
compatibilidad del disco MP3/WMA con este
reproductor queda limitada como sigue:
Frecuencia de muestreo: entre 8-48k Hz (MP3);
entre 32-48 kHz (WMA).
?V elocidad en bits: en un rango de 8-320kbps
(MP3), 32-192 kbps (WMA).
El reproductor no puede leer un archivo
AUDIO CD
1/12
0:52:07
pagina siguiente.
contenga archivos MP3/WMA y
JPEG. Presione TITLE y
Cuando introduce un CD de audio, aparece el menu
en la pantalla del televisor. Presione v / V para
comenzar
MENU
JPEG, puede cambiar del menu
CD de audio
seleccionar
lista de archivos del menu
(MUSICA)
CD-ROM,
CD-R o CD-RW.
en una
y desea regresar a la lista de
Carpetas, utilice los botones v / V para seleccionar
y presione ENTER.
de DVD
CD y Karaoke CD
reproduce formatos MP3/WMA
encuentra
se
?
Lista de usuario
Programa
Track1
Track2
Track3
Track4
Track5
Track6
Track7
?
Borrar Todo
Track8
PROGRAM
MP3/WMA que
Edit
no
tenga la extension
".mp3"/".wma".
Karaoke
Cuando
?
CD-Graphics
se
introduce
un
disco
pantalla del televisor. Presione v / V para
seleccionar una pista y PLAY o ENTER para
la reproduccion.
el menu durante la
?
ver
STOP dos
archivos MP3/WMA
graba
no cree un
ejemplo, Direct-CD),
reproduccion presione
sera
programa de
sistema de archivos (por
con un
imposible reproducir
programa Easy-CD Creator para
de archivos ISO 9660.
CD-G
1/12
?
Lista de usuario
ISO
ser
Funcioamet
los
archivos MP3/WMA. Le recomendamos utilizar el
veces.
0:52:07
Si
software que
comenzar
Para
del disco CD-R debe
9660.
CD-G, aparece el menu
la
en
El formato fisico
Programa
Track1
Track2
Track3
?
Track4
Track5
crear un
El nombre de los archivos debe tener
un
sistema
maximo
de 8 letras y llevar la extension .mp3 o .wma.
No debe incluir caracteres especiales como / ?
*
:
"<>|etc.
Track6
Track7
?
Borrar Todo
Track8
PROGRAM
El numero
ser
Edit
MP3 / WMA
total de archivos
inferior
a
en
el disco debera
650.
Este
1.
Presione v / V para seleccionar
ENTER para ver su contenido.
2.
Presione v / V para seleccionar una pista y PLAY
o ENTER para comenzar la reproduccion.
una
carpeta y
MUSIC
0:00:00
1/12
Lista de usuario
Programa
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
reproductor de DVD requiere que los discos y
las grabaciones cumplan con ciertas normas
tecnicas para poder obtener una calidad de
reproduccion optima. Los DVD pre-grabados se
adaptan automaticamente a estas normas. Existen
muchos tipos diferentes de formatos de discos
grabables (incluidos CD-R con archivos MP3 o
WMA) y estos requieren ciertas condiciones previas
(consulte las indicaciones anteriores) para
garantizar una reproduccion compatible.
6-Music6
Borrar Todo
7-Music7
Los clientes
DISPLAY
ID3 TAG
?
Si reproduce
como
un
los titulos
Info
Si
la
Edit
Comment
hay informacion, aparecera
pantalla.
no
contar con
archivo que contenga informacion,
de las pistas, podra verla
presionando DISPLAY.
[ Title, Artist, Album, Year,
?
PROGRAM
]
"NO ID3 TAG"
no
una
deben olvidar que es necesario
autorizacion para descargar
archivos MP3/WMA y de musica desde Internet.
Nuestra empresa no goza del derecho a otorgar
dicha autorizacion.
La autorizacion
solicitarse
al
siempre
propietario
debera
de los
derechos de autor.
en
19
Caracteristicas del CD de audio
y del disco MP3/WMA
Aleatorio
1
Presione RANDOM durante la
aleatoria
reproduccion
y aparecera
Pausa
1.
2
Presione PAUSE/STEP
(PAUSA)
durante la
2.
Para volver
ENTER
o
1.
reproduccion, presione PLAY,
presione de nuevo PAUSE/STEP.
Si
2.
(.
"RANDOM" de la
veces
para volver
a
1.
la
reproducir cualquier pista
introduciendo
su
de Pista/Todo/Desactivar
pista
o
de
todo el contenido de
?
?
elegir
el modo de
Repite la pista en el modo de repeticion.
Todo: Repite todas las pistas de un disco.
Off (no se muestra nada en pantalla): No repite la
reproduccion.
Si
presiona SKIP (>) una
de una pista, la reproduccion
vez
de
durante la
repeticion
repeticion
se
repeticion
Presione de
y "A"
apareceran
en
la
nuevo
A-B
en
el
punto de terminacion
y "A-B"
secuencia
Para salir de la secuencia y regresar la
reproduccion normal, presione de nuevo A-B.
puede
envolvente
en
las cinco
mas
durante la
o
M)
(m
o
M) repetidamente
reproduccion.
2.
para
seleccionar la velocidad deseada: X2, X4, X8
hacia atras o hacia delante.
3.
Para salir de la funcion
SEARCH, presione PLAY.
efecto de sonido
bocinas que normalmente se
necesitan para escuchar audio multicanal en un
sistema de cine en casa.
o
Presione AUDIO durante la
parecera
"3D SUR."
en
la
reproduccion.
pantalla del menu.
Para regresar al modo de reproduccion normal,
presione AUDIO repetidamente hasta que
"3D SUR."
(m
crear un
3D que simula una reproduccion de
audio multicanal con dos bocinas estereo en lugar de
2.
Busqueda
20
el
del menu.
Esta unidad
1.
cancelara.
Presione SCAN
en
Sonido Envolvente 3D
Pista:
Presione SCAN
disco, presione A-B
un
de
Nota:
1.
de
secuencia durante la
un
3.
(REPETIR) durante la
un disco. Aparecera
el icono
Presione REPEAT para
repeticion deseado.
?
una
haya elegido. El icono de repeticion
apareceran en la pantalla del menu y la
se reproducira
repetidamente.
Presione REPEAT
reproduccion
repeticion.
2.
repetir
reproduccion
que
disco.
1.
Para
pantalla
2.
una
la
aleatoria.
El icono de
reproducir
otra
reproduccion
pista y reanuda
punto donde desee que comience la repeticion.
numero.
Puede
del menu.
A-B
Repeticion
anterior.
Repeticion
pantalla
o
Presione SKIP . dos
Puede
del menu.
SKIP > durante la
presiona
reproduccion
>) brevemente durante
la reproduccion para ir a la siguiente pista o
regresar al inicio de la pista actual.
pista
3.
pista
Presione SKIP
pantalla
Para regresar al modo de reproduccion normal,
presione RANDOM repetidamente hasta que
aleatoria, la unidad elige
Cambio de
la
en
inmediatamente
Consejo:
la
a
"RANDOM"
desaparezca
reproduccion.
iniciara
se
La
reproduccion.
desaparezca
de la
pantalla
del menu.
5.
Reproduccion programada
La funcion
de
Inserte
un
6.
disco.
Discos CD de audio, CD-G o MP3/WMA:
Aparece el menu del AUDIO CD, CD-G o MUSIC.
La
marca
aparecera
E
"Programa"
en
Para volver
reproduccion normal desde la
reproduccion programada, seleccione una pista
la lista AUDIO CD (o MUSIC) y presione PLAY
a
la derecha de la
el lado derecho de la
palabra
pantalla del
1.
menu.
Nota:
Presione PROGRAM
marca
una vez
para salir del modo de edicion de programas.
E
AUDIO CD
0:52:07
?
?
MUSIC
1/12
0:00:00
Lista de usuario
Programa
E
1/12
Lista de usuario
Programa
Track1
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
4-Music4
Track6
5-Music5
Track7
6-Music6
Borrar Todo
Track8
E
del CD de audio
repite la pista actual.
Todo: repite todas las pistas de la lista programada.
Off (no se muestra nada en pantalla): no
reproduce repetidamente.
presiona una vez > durante la reproduccion
repetida de pistas, se cancelara la reproduccion
repetida.
Borrar Todo
PROGRAM Edit
Info
Menu
de MP3/WMA
CD de Video: Presione PROGRAM
la
con
reproduccion en paro. Aparecera el menu de la
programacion. Vuelva a presionar PROGRAM y
mantengalo presionado durante algunos segundos
1.
2.
para salir del menu.
CD de video
el menu
PBC, debe ajustar PBC
con
a
"Off"
de
programada
configuracion para utilizar la reproduccion
(Consulte "PBC" en la pagina 14).
CD-G
VIDEO CD
0:52:07
Lista de usuario
Programa
Utilice
de
pista
una
vVBpara
de la lista
seleccionar la
eliminar de la lista
"Program".
Presione CLEAR.
Repita
"Program"
pista
Funcioamet
que desea
para eliminar otras
pistas
de la lista.
Nota:
en
el modo de
Pista:
Eliminacion
un
un
Si
7-Music7
DISPLAY
En
elegir
de
Nota:
Edit
PROGRAM
el icono de
Aparecera
reproduccion
repeticion.
2-Music2
Track5
Menu
?
de
pistas programadas
Presione REPEAT para
repeticion deseado.
la
mas; desaparecera
la
Presione REPEAT durante la
disco.
2.
a
de las
Repeticion
Presione PROGRAM.
2.
ENTER para iniciar la
La reproduccion se inicia
o
en el orden
reproduccion.
en que programo
las pistas. La reproduccion se
detiene despues de que todas las pistas de la lista
"Programa" se han reproducido una vez.
programacion le permite almacenar sus
pistas favoritas de cualquier disco en la memoria del
reproductor. Un programa puede contener 30 pistas.
1.
Presione PLAY
E
1.
1/12
Lista de usuario
Programa
Tr ack5
Track1
Track5
Tr ack2
Tr ack2
Track2
Track7
Tr ack3
Tr ack3
Track3
Track4
Tr ack4
Tr ack1
Track4
Track1
E
Track5
de toda la lista de programas
Presione B para
desplazarse
a
la lista
"Programa".
2.
Tr ack1
Tr ack5
Eliminacion
Utilice v / V para seleccionar "Borrar Todo" y
continuacion presione ENTER.
a
Nota:
Track6
Track7
Borrar Todo
Borrar Todo
Track8
Los programas
se
borran cuando
se
extrae el disco.
PROGRAM Edit
Menu
del CD de video
Seleccione
Menu
del CD-G
3.
pista en "Lista de usuario"; a
continuacion presione ENTER para anadir la pista
seleccionada a la lista "Programa".
Repita para anadir otras pistas a la lista.
4.
Presione B.
una
Seleccione la
reproducir
en
que desee empezar
la lista "Programa".
pista
a
21
Discos JPEG
Con este
reproductor
Ir
de DVD
podra
ver
discos
Introduzca
disco y cierre la
PHOTO en la pantalla.
menu
un
bandeja. Aparece
otro archivo
Presione SKIP
con
archivos JPEG.
1.
a
el
JPEG
presione una vez el
cursor (b o B) mientras visualiza una imagen para
avanzar al archivo siguiente o regresar al anterior.
(.
>)
o
o
JPEG
Zoom
PHOTO
Use la funcion
Imagen
Lista de usuario
imagen
JPEG Folder 1
para aumentar el tamano
de la foto (consulte la pagina 18).
de la
zoom
JPEG Folder 2
>>>
JPEG Folder 3
Rotacion
JPEG Folder 4
JPEG Folder 5
de la
imagen
JPEG Folder 6
Presione v / V mientras
JPEG Folder 7
se
muestra
imagen
una
JPEG Folder 8
hacerla rotar
o en
2.
3.
Presione v / V para seleccionar una carpeta y
presione ENTER. Aparecera una lista de los
luego
archivos de la
lista
carpeta. Si
encuentra
se
Musica
en una
y
1.
tipos
Si desea
archivo
Inserte el disco que contiene los dos
archivo en el reproductor.
2.
Presione TITLE para mostrar el menu
PHOTO.
3.
Presione v / V para seleccionar
4.
Use B para seleccionar el icono
y a
continuacion presione ENTER. Se iniciara
ver un
en
ENTER.
particular, presione
v / V
ve
archivo, puede presionar RETURN para volver al
anterior
(menu PHOTO).
Presione DVD
MENU
para ir
a
la
: >>>
opciones de velocidad de proyeccion
(Rapida), >> (Normal) y > (Lenta).
Utilice vVbBpara marcar la velocidad. A continuacion,
utilice b / B para seleccionar la opcion que desee y presione
disco
con
Presione RETURN y
Proyeccion
de
se
ocultara
diapositivas
Utilice los botones
la informacion
Imagen congelada
de
El
la
opcion
diapositivas) y
marcar
Para escuchar la musica
programe las
imagenes,
MUSIC y
archivo de fotos.
un
continuara
la
hasta
proceda
deseada mientras visualiza
pistas
como se
deseadas
indico
en
el menu
antes.
compatibilidad del disco JPEG con este
reproductor queda limitada como sigue:
Dependiendo del tamano y numero de los archivos
JPEG, podria tomar mucho tiempo para que el
reproductor DVD lea todo el contenido del disco. Si
no aparece nada en pantalla despues de algunos
minutos, es probable que algunos de los archivos
sean demasiado grandes. Reduzca la resolucion
de los archivos JPEG a menos de 2M pixeles,
como 2760 x 2048 pixeles, y grabe otro disco.
?
?
El numero total de archivos y
debera ser inferior a 650.
?
Algunos
reproductor pasara
proyeccion
de
?
Asegurese
?
Si la extension de los archivos
cambiela por ".jpg".
?
Este
al modo de
PAUSA.
Para regresar a la proyeccion de diapositivas,
presione PLAY o presione de nuevo
PAUSE/STEP.
22
de
Consejo:
JPEG
Presione PAUSE/STEP durante la
diapositivas.
del archivo.
JPEG
vVbBpara
(Slide Show) (Proyeccion
presione ENTER.
2.
el mismo disco.
en
La
MP3/WMA y JPEG, puede cambiar entre
MP3/WMA y JPEG. Presione TITLE y MUSIC o PHOTO y
la parte superior del menu se iluminara.
un
grabados
pagina siguiente.
Existen tres
En
MP3/WMA
reproduccion. La reproduccion
que se presione STOP.
ENTER.
1.
imagen
Puede visualizar archivos mientras escucha archivos
Consejos:
?
una
seleccionar
menu
?
MP3/WMA mientras se visualiza
de musica
presione
reloj
sentido contrario.
de archivos y desea regresar a la lista de carpetas,
utilice los botones v / V del control remoto para
un
?
el sentido de las manecillas del
JPEG
para marcarlo y ENTER o PLAY.
Comienza la visualizacion del archivo. Mientras
?
en
para
carpetas
en
el disco
discos pueden ser incompatibles por
haber sido grabados en un formato diferente o
por las condiciones del disco.
de que todos los archivos
seleccionados tengan la extension ".jpg" cuando
los copie al CD.
".jpe"
o
"jpeg",
leer archivos
cuyos nombres no tengan la extension ".jpg",
incluso si los archivos se muestran como archivos
de imagen JPEG en el Explorador de Windows.
productor
de DVD
es
no
podra
Mantenimiento y
Consulte la informacion
ponerse
en
Manejo
contacto
en
con
reparaciones
este
capitulo
el servicio de
antes de
soporte tecnico.
de la unidad
Durante el transporte de la unidad
Conserve la
y los materiales de embalaje
originales. Si necesita enviar de nuevo la unidad, para
su maxima
proteccion empaquetela como venia de
caja
fabrica.
Conservacion
?
No utilice
cerca
?
No
de las
superficies
liquidos volatiles,
externas
insecticidas,
como
de la unidad.
de caucho
deje productos
contacto
con
prolongado,
superficie.
o
la unidad durante
pues
plastico en
un tiempo
podrian dejar
Limpieza
de la unidad
Para
el
marcas en
la
reproductor, utilice un pano suave y
seco. Si las superficies estan
extremadamente sucias,
utilice un pano suave ligeramente humedecido con
una solucion
de detergente suave.
limpiar
No utilice disolventes
o
fuertes,
alcohol, benceno
como
disolvente, pues podrian danar la superficie de la
unidad.
Mantenimiento de la unidad
El
reproductor
alta tecnologia.
de DVD
Si los lentes
unidad del disco estan
calidad de la
aparato de precision de
es un
opticos
sucios
imagen podria
o
y las
piezas
de la
deteriorados, la
reducirse.
Dependiendo del medio de uso, se recomienda la
inspeccion y el mantenimiento regulares tras 1,000
horas de
Para mas
uso.
informacion, pongase
distribuidor mas
en
contacto
con su
cercano.
23
de
Reproduccion
pelicula DivX
Utilizando el
disco de
un
La
compatibilidad de los discos DivX con este
reproductor esta limitada del siguiente modo:
?
reproductor DVD, puede reproducir
un
El tamano
de resolucion
DivX esta
por
disco DivX.
?
1.
disco y cierre la bandeja. El menu
MOVIE aparece en la pantalla del televisor.
Inserte
un
MOVIE
Si
DivX
tener hasta 56 caracteres.
expresar el codigo en el archivo
visualizara
en la pantalla.
puede
no se
DivX,
0:00:00
de
El nombre del archivo de los subtitulos
pueden
?
debajo
disponible del archivo
720x576 (W x H) pixeles.
"
se
"
_
Lista de usuario
?
Movie Folder 1
Si el numero
Movie Folder 2
superior
Movie Folder 3
Movie Folder 4
a
30
funcionara
Movie Folder 5
fotogramas en la pantalla
por segundo, la unidad no
de
es
normalidad.
con
Movie Folder 6
Movie Folder 7
Movie Folder 8
?
Si la estructura de video
grabado
2.
Presione v /
seleccionar
Vpara
continuacion, presione
con
ENTER.
los archivos contenidos
en
una
carpeta y,
Aparece
la
una
o
a
lista
?
carpeta. Si esta
lista de archivos y desea regresar a la lista
de carpetas, use los botones v / V del mando a
en una
distancia para resaltar la
ENTER.
opcion
y
audio.
GMC?
GMC
una
Si desea
ver un
archivo
v / V para resaltar el
particular, presione
archivo y presione ENTER
estandar
Hay
en
o
Presione STOP para salir.
?
?
CD
a
la
pagina siguiente.
archivo
con
Los subtitulos
del disco
correctamente si
3
pueden no
descarga un titulo
Si el men˙ de
en
z
configuraciUn
con
correctamente.
24
diferentes niveles de codificacion
de
subtItulos
del disco
no
Es
como
GMC,
punto,
2
puntos
o
puntos.
reproducible
"
".mpg ", ".mpeg
"Dolby Digital ",
reproducible
reproducible
"DTS
", "PCM ", "MP3 ", "WMA ".
Frecuencia de muestreo: entre 8
entre 32
DivX por Internet.
el idioma del DivX que usted va a reproducir,
el idioma de los subtItulos puede no visualizarse
cuenta
Algunos codificadores MPEG4,
Xvid, disponen de esta opcion.
Formato de audio
?
visualizarse
Compensation.
especificada en el
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
?
?
o
z ".avi ",
MP3/WMA, JPEG y MOVIE, puede
cambiar entre los menus MUSIC, PHOTO y MOVIE. Si
pulsa TITLE, se iluminaran las palabras MUSIC, PHOTO y
MOVIE en la parte superior del menu.
un
de Global Motion
Formato de codificacion
Presione DVD MENU para ir
En
siglas
MPEG4.
Archivo DivX
Consejos:
?
las
normalmente denominados GMC de 1
PLAY.
4.
son
herramienta de codificacion
DivX
3.
esta
Si el archivo esta grabado con GMC, la unidad
solo admite 1 punto del nivel de grabacion.
*
presione
no
y audio del archivo
intercalada, se emitira video
48kHz
-
48 kHz
(WMA)
Tasa de bits: entre 8 320kbps (MP3),
32
192kbps (WMA)
-
-
-
(MP3),
Caracteristicas
Memoria de la ultima
Este
reproductor
escena
adicionales
Con el control remoto
escena
almacena
del ultimo
Control de otros televisores
con
el control remoto
puede regular
el nivel de
sonido, la recepcion de senales y el interruptor de
en
encendido de
memoria la ultima
disco visualizado. La
escena
su
televisor LG.
Con el control remoto
permanece en la memoria incluso si retira el disco o
apaga el reproductor. Si carga un disco del que se ha
almacenado una escena, esta reaparecera de forma
automatica.
de
puede regular
tambien
el nivel
sonido, la recepcion de senales y el interruptor de
encendido de otros televisores que no sean LG. Si su
televisor se encuentra en la siguiente tabla, ajuste el
codigo correspondiente
a su
fabricante.
Nota:
Este
reproductor
disco si
un
comenzar
configuraciones
reproductor antes de
de
mantiene
la
pantalla
2.
protector
de
el
pantalla,
Si
de DVD
reproductor
se
?
Suelte el boton
del fabricante de
su
del modo de video
Durante la
reproduccion de algunos discos, las
imagenes pueden parpadear o mostrarse
punteadas en los bordes. Esto significa que la
interpolacion vertical o el desinterlazado no estan
correctamente ajustados al disco. En este caso, la
calidad de la imagen puede mejorarse cambiando
de
el boton
TV POWER
(consulte
TV POWER.
de televisores controlables
codigo
la lista aparece mas de un codigo, indiquelos
a uno, hasta que encuentre el que funcione mejor
su televisor.
en
uno
con
apaga automaticamente.
Ajuste
presionado
siguiente tabla).
Numeros
reproductor de DVD permanece en modo Stop
durante cinco minutos. Transcurridos cinco minutos
el
codigo
televisor, presione las teclas numericas mientras
protector de pantalla aparece cuando el
con
Para seleccionar el
1.
reproduccion.
Protector de
El
almacena las
desconecta el
se
la
no
Fabricante
Numero
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
de
codigo
(Predeterminado),
2
el modo de video.
?
?
Para cambiar el modo de video.
Mantenga
presionado OSD durante aproximadamente 3
segundos durante la reproduccion del disco. Se
mostrara en la pantalla del televisor el numero del
nuevo modo de video seleccionado. Compruebe si
ha mejorado la calidad del video. En caso contrario,
repita el procedimiento indicado hasta que mejore
la calidad de la imagen.
Secuencia de cambio del modo de video:
MODO1
?
→
MODO2
→
MODO3
→
Descripciones
de
video)
se
a su
Dependiendo de
algunos botones
su
televisor,
es
posible
que
funcionen para el aparato,
incluso tras introducir el codigo correcto del
no
fabricante.
?
Si introduce
un nuevo
sustituira el numero
numero
previamente
Al cambiar las baterias
codigo,
este
introducido.
del control remoto, es
de codigo indicado regrese
posible
que el numero
al valor
predeterminado.
del codigo.
numero
de
Introduzca nuevamente el
detalladas de los modos de video
MODO1: El material fuente del DVD
o
?
?
MODO1
Si apaga el equipo, el modo de video volvera
estado inicial (MODO 1).
Notas:
determina
a
partir
(material
de film
de la informacion
del
disco.
MODO2: Adecuado para la reproduccion de
contenidos basados en filmes o material basado
video
grabado
con
el metodo
"Progressive
en
Scan".
MODO3: Adecuado para la reproduccion de
contenidos basados en video con un movimiento
comparativamente
lento.
Nota:
ajuste del modo de video solo funciona cuando el
modo Progressive Scan se encuentra en "On" en el
menu Setup.
El
25
Uso de la funcion
1.
Inserte
2.
Ajuste
un
Karaoke
disco de karaoke.
Conecte
un
para evitar la
acustica (por ejemplo,
microfono
a
4.
5.
microfono
voz
Bocina
Bocina derecha
izquierda
Voice1
Voice1
V2
Voice2
Voice2
V1+V2
Voice1
Voice2
Sin
Sin
Apagado
voz
voz
conectado,
no
(EFECTO): Puede utilizar efectos
especiales. Cada vez que presione 1/2 el
efecto especial cambia segun se muestra
abajo.
aparecera
Karaoke.
Presione PLAY para
comenzar
la
reproduccion.
KEY
el control MIC VOL y cante una cancion.
Si desea configurar la opcion KARAOKE,
Ajuste
siga
Salida
V1
un
la entrada MIC.
el
EFFECT
hay ningun
el menu
grabado,
con
que desea.
Seleccion de
Nota:
no
seleccione la
antes de conectar el microfono.
largo aullido),
Si
cantante de karaoke
el control de volumen del microfono
retroalimentacion
3.
un
voz
MIC VOL al minimo
duo
VOICE (voz): Si desea cantar
(CLAVE):
Puede
ajustar
la clave
con
los botones 1/2.
Nota:
los pasos 6-8.
El control de la tecla cuando el
6.
Presione KARAOKE durante la
el menu
Aparecera
7.
reproduccion.
KARAOKE.
Utilice 3/4 para seleccionar el elemento
deseado (ECHO (Eco), MELODY (Melodia),
VOICE
(Voz), EFFECT (Efecto) o KEY
(Clave). La pantalla cambiara segun se
muestra en el siguiente grafico.
reproductor de DVD
esta conectado al amplificador (receptor) por medio
de una conexion de audio digital puede causar que el
sonido se apague en las bocinas derecha/izquierda
conectadas al amplificador (receptor). En ese caso,
debera cambiar el modo de sonido del amplificador
(receptor) segun la salida de las bocinas.
9.
Presione KARAOKE para salir del menu
KARAOKE.
Notas:
?
Es
que el microfono
posible
durante
una
este
disponible
reproduccion especial (por ejemplo,
no
lenta).
?
La
opcion Karaoke funciona
compatibles con karaoke.
?
Los menus
disponibles
?
Para mas
8.
Utilice 1/2 para
seleccionado.
ECHO(ECO):
eco con
Puede
el valor del elemento
ajustar
el volumen de
los botones 1/2.
MELODY
con
ajustar
(MELODIA):
el grupo
u
Si desea cantar solo
orquesta de fondo
o con
acompanamiento de una melodia guia vocal,
desactive la opcion MELODY.
26
no
discos
no
estar
detalles, consulte la informacion
Durante la
DTS,
con
de VOICE y MELODY pueden
en algunos discos de karaoke.
proporcionada junto
?
solo
con
reproduccion
hay salida del
el disco.
de
un
disco codificado
sonido del microfono.
con
Referencias
de idioma
Codigos
Utilice esta lista para introducir el idioma deseado para los
Audio Del disco, Subtitulos Del disco, Menu Del disco.
Idioma
Codigo
Abjaso
6566
Afaro
Codigo
Idioma
Codigo
Idioma
Codigo
Fiji
7074
Lingala
7678
Singales
8373
6565
Finlandes
7073
Lituano
7684
Eslovaco
8375
Afrikaans
6570
Frances
7082
Macedonio
7775
Esloveno
8376
Albanes
8381
Frisio
7089
7771
Somali
8379
Amarico
6577
7176
7783
Espanol
6983
Arabe
6582
Gallego
Georgiano
7565
Malagasy
Malayo
Malayalam
7776
Sudanes
8385
Armenio
7289
Aleman
6869
Maltes
7784
Suahili
8387
Asames
6583
Griego
6976
Maori
7773
Sueco
8386
Aymara
Azerbaijano
Basquiro
Eusquera
Bengali; Bangla
6588
Groenlandes
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavo
7779
Tagalo
Tajik
6665
Gujarati
7185
Mongol
7778
Tamil
8465
6985
Hausa
7265
Nauru
7865
Tartaro
8484
6678
Hebreo
7387
7869
Telugu
8469
Bhutan
6890
Hindi
7273
7879
Tailandes
8472
Bihari
6672
Hungaro
7285
7982
Tibetano
6679
Breton
6682
Islandes
7383
Nepali
Noruego
Oriya
Punjabi
8065
8473
Bulgaro
6671
Indonesio
7378
Pashto, Pushto
8083
Tigrinya
Tongo
8479
Burmese
7789
Interlingua
7365
Persa
7065
Turco
8482
Bielorruso
6669
Irlandes
7165
Polaco
8076
Turkmenistan
8475
Camboyano
7577
Italiano
7384
Portugues
8084
Twi
8487
Catalan
6765
Japones
7465
Quechua
8185
Ucraniano
8575
Chino
9072
Javanes
7487
Retorromano
8277
Urdu
8582
Corso
6779
Canares
7578
Rumano
8279
Uzbeco
8590
Croata
7282
Cachemiro
7583
Ruso
8285
Vietnamita
8673
Checoslovaco
6783
Kazakh
7575
Samoano
8377
Volapuk
8679
Danes
6865
Kirguizo
7589
Sanscrito
8365
Gales
6789
Holandes
7876
Coreano
7579
Gaelico
7168
Wolf
8779
Ingles
Esperanto
6978
Kurdo
7585
Serbio
8382
Xhosa
8872
6979
Lao
7679
Serbo-croata
8372
Yiddish
7473
Estonio
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroes
7079
Leton
7686
Sindhi
8368
Zulu
9085
Codigos
del area
Seleccione
un
codigo
Area
de area
Codigo
escoces
8471
de este cuadro.
Area
Codigo
Area
Codigo
Area
Codigo
ET
Malasia
MY
Arabia Saudita
SA
AR
Etiopia
Fiji
FJ
Maldivas
MV
SN
Australia
AU
Finlandia
FI
Mexico
MX
Austria
AT
Francia
FR
Monaco
MC
Senegal
Singapur
Republica de Eslovaquia
Belgica
BE
Alemania
DE
Mongolia
MN
Eslovenia
SI
Bhutan
BT
Gran Bretana
GB
Marruecos
MA
Sudafrica
ZA
Bolivia
BO
Grecia
GR
Nepal
NP
Corea del Sur
KR
Brasil
BR
Groenlandia
GL
Paises
NL
Espana
ES
Camboya
KH
Antillas Holandesas
AN
Sri Lanka
LK
Canada
CA
Islas Heard y McDonald HM
HK
Hong Kong
Nueva Zelanda
NZ
Suecia
SE
Chile
CL
Hungria
HU
NG
Suiza
CH
China
CN
India
IN
Nigeria
Noruega
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Tailandia
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italia
IT
Panama
PA
Turquia
Uganda
Croacia
HR
Jamaica
JM
PY
Ucrania
UA
CZ
Japon
JP
Paraguay
Filipinas
PH
Estados Unidos
US
Dinamarca
DK
Kenia
KE
Polonia
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egipto
EG
Libia
LY
Rumania
RO
Vietnam
VN
El Salvador
SV
Luxemburgo
LU
Federacion
RU
Zimbabwe
ZW
Afganistan
Argentina
Republica
AF
Idioma
iniciales.
siguientes parametros
Checa
Bajos
Rusa
SG
SK
UG
27
Deteccion
y solucion
de
problemas
No
hay energia
?
El cable de electricidad esta
?
desconectado.
electrica.
El
Correccion
Causa
Sintoma
reproductor
esta
encendido, pero
?
No ha insertado
?
No ha
al enchufe
disco.
ningun
muestra
se
imagen
alguna.
No
hay
sonido.
?
El cable de video
?
El
equipo
audio
senal
?
El
Seleccione el modo de entrada de
El
no
reproductor
de DVD
?
el cable de
con
Las
Se inserto
un
disco que
Seleccione la modalidad de entrada
equipo
apagado.
?
?
no
Encienda el
?
?
conectado
puede
?
Inserte
un
disco
esta activado.
esta
?
al
dirigido
reproductor de
no
remoto del
El control remoto esta
?
DVD.
demasiado
el
Cancele la funcion
Dirija
su
lejos
del DVD.
en
la
nuevo
de color y
de Clasificacion
o
nivel.
el control remoto hacia el
remoto del
?
digital
reproducible. (Revise
tipo de disco, sistema
codigo regional.)
El control remoto
con
y encienda de
DVD con el
el
El nivel de clasificacion
sensor
el sonido del
Conecte la salida de audio
cambie
?
equipo
posicion correcta
el reproductor de
interruptor.
funciona
apropiadamente.
los conectores.
cable de audio.
han
no se
en
receptor de audio para
pueda escuchar
reproductor de DVD.
reproduccion.
El control remoto
para el televisor.
?
reproducir.
inicia la
Compruebe
que
opciones
configurado incorrectamente.
se
apropiado
correcta del
que conecta el
de AUDIO
disco.
Conecte bien el cable
esta ajustado para recibir la
de salida del DVD.
el cable de audio esta
un
?
no
interruptor
con
?
conectado
energia
?
Inserte
video
esta bien conectado.
no
cable de
que este
encendido el indicador de DVD o CD
de audio de la pantalla.
no
configurado el televisor para
que reciba la senal de DVD.
clavija del
de pared.
?
funciona.
No
Conecte la
reproductor
sensor
de DVD.
Opere el control remoto
reproductor de DVD.
cerca
del
Especificaciones
SALIDA DE AUDIO DIGITAL (COAXIAL):
0.5 V (p-p), 75 Ω, conector jack RCA x 1
General
Requisitos de corriente:
Consumo electrico:
AC 110-240
V, 50/60 Hz
8 W
Sistema
Dimensiones
430
x
Peso
35
x
(aprox.):
242 mm (Ancho
(aprox.):
1.9
x
Alto
x
Largo)
Laser:
sin base
Laser
kg
semiconductor, longitud de onda
Sistema de senal:
Te mperatura de funcionamiento:
650
nm
NTSC
Frecuencia de
respuesta:
DVD(PCM96kHz):de8Hza44kH
DVD(PCM48kHz):de8Hza22kH
De5°Ca35°C(de41°Fa95°F)
Humedad de funcionamiento: De 5%
a
90%
CD:de8Hza20kHz
Salidas
Indice
SALIDA DE VIDEO:
1.0 V (p-p), 75 Ω, sinc,
Mas
negativa,
SALIDA DE S-VIDEO:
(Y) 1.0 V (p-p), 75 Ω, sinc,
conector
negativa,
jack
Mini DIN
RCA
4-pin
1
x
x
Distorsion
(solo
conectores de SALIDA
harmonica:
ANALOGA)
Menos de 0.0008%
1
Accesorios
SALIDA DE COMPONENTE:
(Y) 1.0 V (p-p), 75 Ω, sinc, negativa, conector RCA
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, conector RCA x 2
jack
RCA
Cable de video
x
1
(I, D)
Baterias
x
(1),
Cable de audio
(2).
1
Nota: El diseno y las especificaciones estan sujetos
28
interferencia:
a
Rango dinamico:
Mas de 95 dB (DVD/CD)
(C)0.3V(p-p)75Ω
SALIDA DE AUDIO:
2.0 Vrms (1 kHz, 0 dB), 600 Ω, conector
de senal
de 100 dB
a
cambios sin
previo
aviso.
(1),
Control remoto
(1),

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement